The mini at a glance : - Very small and compact piston pressure reducing valve

- Lightweight and therefore particularly suitable for portable units

- For connection to a medical high pressure gas cylinder (200 bar)

- With preset flow rate between 1 l/min and 15 l/min

- With integrated pressure relief valve

- Mainly intended for home care and in emergency medicine

SWISS optio mini

Safety through Precision

The mini pressure reducing valve is suitable for the supply of extraction units for oxygen enrichment as well as for the supply of consumers with other medical gases. The mini is available in two versions : - either with a firmly defined flow rate between 1 l/min and 15 l/min (the flow limitation takes place in the hose nipple by means of an aperture) - or with a firmly fixed pressure (as a standard 4.2 bar, other pressures on request). Thanks to its low weight (only 295 g including the pressure gauge), the mini is particularly suitable for portable units and in emergency medicine. The mini is certified in accordance to EN ISO 10524-1 (incl. ignition test for oxygen). CE marking according to the Guideline for Medical Products 93/42/EEC.

m

ini

Technical data : Construction Single stage pressure reducing valve Inlet pressure 200 bar Outlet pressure 4.2 bar (± 0.4 bar) fixed (basic version, other pressures on request) Flow rate Value between 1 to 15 l/min (preset) Measurement accuracy ± 20% at 4 l/min Gas Air, O2, CO2, N2O, N2 Inlet Cylinder connection DIN, NF, AGA, BS, UNI (others on request) Outlet G 1/8" inner thread for outlet not flow-controlled, with preset flow rate hose nipple 5 mm Material Brass (external parts nickel plated), stainless steel, 1.4310 Sealing material FPM, PVDF, PA Operating temperature -20° to +60° Dimensions B x H X D : 38 x 54 x 72 mm Weight 270 g (without gauge), 295 g (with gauge)

PM

0106

E.D

OC

/03.

09/M

G

Model variants Art.No GM625x :

Necessary information when ordering : Gas Air, O2, CO2, N2O, N2 Flow rate Desired flow rate for versions with preset flow rate Inlet DIN, NF, AGA, BS, UNI Outlet G 1/8" inner thread, hose nipple 5 mm (for preset flow rate)

Subject to changes. All trademarks are property of Gloor Bros Ltd.

GLOOR BROS LTD www.gloor.ch Kirchbergstrasse 111 gloor@gloor.ch 3401 BURGDORF Tel.: +41 34 427 47 47 SWITZERLAND Fax.:+41 34 423 15 46