SWEP B12 · The B12 is an excellent choice for demanding steam and air dryer applications. It can...
2
Size Height of plate pack Total weight Externally threaded Connections* *For specific dimensions, or information about other types of connections, please contact your SWEP sales representative. Soldering Pressure classes S Standard, evaluated per EN 13345. H High, evaluated per EN 13345. D Higher, developed for CO 2 applications, evaluated per EN 13445. The large-port B12 delivers compact heat transfer solutions for applications with large flows. It is available with different plate patterns to fulfil various thermal duties across a wide range of fluid viscosities and densities. The B12 is an excellent choice for demanding steam and air dryer applications. It can be as a desuperheater in air conditioning and a CO 2 suction gas heat exchanger in refrigeration. Materials Channel plate Brazing SC Stainless steel Copper NC Stainless steel Copper SN Stainless steel Nickel Max number of plates (NoP) Port size F1/P1 Port size F2/P2 Port size F3/P3 Port size F4/P4 Max volume flow Channel volume (SI) Channel volume (US) www.swep.net CHALLENGE EFFICIENCY SWEP B12 110/140 33 mm (1.3 in) 33 mm (1.3 in) 33 mm (1.3 in) 33 mm (1.3 in) 16,9 m³/h (74.4 gpm) 0,063 dm 3 0.00222 ft 3 SC S SN S NC S 4+(2,34×NoP) mm 1,12+(0,12×NoP) kg 0.157+(0.092×NoP) in 2.47+(0.265×NoP) lb SC D SC H 12,4+(2,34×NoP) mm 2,94+(0,12×NoP) kg 0.488+(0.092×NoP) in 6.49+(0.265×NoP) lb F1 F2 F3 F4 287 (11.3) 234 (9.21) 117 (4.61) 63 (2.48)
Transcript of SWEP B12 · The B12 is an excellent choice for demanding steam and air dryer applications. It can...
Size Height of plate pack Total weight
Externally threaded
Connections*
*For specific dimensions, or information about other types of connections, please contact your SWEP sales representative.
Soldering
Pressure classesS Standard, evaluated per EN 13345.H High, evaluated per EN 13345.D Higher, developed for CO2 applications, evaluated per EN 13445.
The large-port B12 delivers compact heat transfer solutions for applications with large flows. It is available with different plate patterns to fulfil various thermal duties across a wide range of fluid viscosities and densities. The B12 is an excellent choice for demanding steam and air dryer applications. It can be as a desuperheater in air conditioning and a CO2 suction gas heat exchanger in refrigeration.
Materials Channel plate Brazing
SC Stainless steel Copper
NC Stainless steel Copper
SN Stainless steel Nickel
Max number of plates (NoP) Port size F1/P1 Port size F2/P2 Port size F3/P3 Port size F4/P4 Max volume flow Channel volume (SI) Channel volume (US)
www.swep.net
CH
ALL
EN
GE
EFF
ICIE
NC
YSWEP B12
110/14033 mm (1.3 in)33 mm (1.3 in)33 mm (1.3 in)33 mm (1.3 in)
16,9 m³/h (74.4 gpm)0,063 dm3
0.00222 ft3
SC SSN SNC S
4+(2,34×NoP) mm 1,12+(0,12×NoP) kg
0.157+(0.092×NoP) in 2.47+(0.265×NoP) lb
SC DSC H
12,4+(2,34×NoP) mm 2,94+(0,12×NoP) kg
0.488+(0.092×NoP) in 6.49+(0.265×NoP) lb
F1 F2
F3 F4
287 (
11.3)
234 (
9.21)
117 (4.61)
63 (2.48)
Third party approvalsSWEP BPHEs are generally approved by listed below certifi cation organizations:Europe, Pressure Equipment Directive (PED)America, Underwriters Laboratories Inc (UL)Japan, Kouatsu-Gas Hoan Kyoukai (KHK)Additionally SWEP holds approvals from a vast variety of other certifi cation organizations. For approval information regarding a specifi c product please contact your local SWEP representative. SWEP reserves the right to make changes without prior notice.
The BPHE conceptThe Brazed Plate Heat Exchanger (BPHE) is constructed as a plate package of corrugated channel plates with a fi ller material between each plate. During the vacuumbrazing process, the fi ller material forms a brazed joint at every contact point between the plates, creating complex channels. The BPHE allows media at different temperatures to come into close proximity, separated only by channel plates that enable heat from one media to be transferred to the other with very high effi ciency. The concept is similar to other plate and frame technology, but without the gaskets and frame parts.
Cover platePlate package
Connections
Cover plateChannel plates
Zero hole channel plate
SSP calculation softwareWith SWEP’s unique SSP, the SWEP Software Package, you can do advanced heat transfer calculations yourself, and choose the product solution that suits your application best. It’s also easy to choose connections and generate drawings of the complete product. If you would like advice, or you would like to discuss different product solutions, SWEP offers all the service and support your need.
Material disclaimerThe information and recommendations in regards to the products are presented in good faith, however, SWEP makes no representations or warranties as to the completeness or accuracy of the information. Information is supplied upon the condition that the purchasers will make their own determination as to the products’ suitability for their purposes prior to use. Purchasers should note that the properties of the products are both application and material selection dependent and that products containing stainless steel are still subject to corrosion if used in unsuitable environments.
www.swep.net
CH
ALL
EN
GE
EFF
ICIE
NC
YSWEP B12
SC-S, NC-SPED
(PSI)
-320.8 400 (°F)
UL
(bar)
-196 204 (°C)
-196 20 50 100 135 150 175 200 225 (°C)
Circuit 1 Circuit 2
-320.8 68 122 212 275 302 347 392 437 (°F)
24
26
28
30
32
34
36(bar)
PED
350370390410430450470490510
(PSI)
404244464850525456586062
-196 20 50 100 135 150 175 200 225
(bar)
(°C)
PED
-320.8 68 122 212 275 302 347 392 437 (°F)
580610640670700730760790820850880
(PSI) Pressure HPressure DSC-S, NC-S
-320.8-196 20 50 100 150 200 225 250 300 350
(bar)
(°C)
PED
68 122 212 302 392 437 482 572 662
(PSI)
(°F)
0
2
4
6
8
10
12
14
020406080
100120140160180200220
SN-S
30
31
32
33
34
35
435
455
475
495
ULPEDSC-D, SC-HPED
(PSI)
-320.8 400 (°F)
UL
(bar)
-196 204 (°C)
-196 20 50 100 135 150 175 200 225 (°C)
Circuit 1 Circuit 2
-320.8 68 122 212 275 302 347 392 437 (°F)
24
26
28
30
32
34
36(bar)
PED
350370390410430450470490510
(PSI)
404244464850525456586062
-196 20 50 100 135 150 175 200 225
(bar)
(°C)
PED
-320.8 68 122 212 275 302 347 392 437 (°F)
580610640670700730760790820850880
(PSI) Pressure HPressure DSC-S, NC-S
-320.8-196 20 50 100 150 200 225 250 300 350
(bar)
(°C)
PED
68 122 212 302 392 437 482 572 662
(PSI)
(°F)
0
2
4
6
8
10
12
14
020406080
100120140160180200220
SN-S
30
31
32
33
34
35
435
455
475
495
ULPED SN-SPED
(PSI)
-320.8 400 (°F)
UL
(bar)
-196 204 (°C)
-196 20 50 100 135 150 175 200 225 (°C)
Circuit 1 Circuit 2
-320.8 68 122 212 275 302 347 392 437 (°F)
24
26
28
30
32
34
36(bar)
PED
350370390410430450470490510
(PSI)
404244464850525456586062
-196 20 50 100 135 150 175 200 225
(bar)
(°C)
PED
-320.8 68 122 212 275 302 347 392 437 (°F)
580610640670700730760790820850880
(PSI) Pressure HPressure DSC-S, NC-S
-320.8-196 20 50 100 150 200 225 250 300 350
(bar)
(°C)
PED
68 122 212 302 392 437 482 572 662
(PSI)
(°F)
0
2
4
6
8
10
12
14
020406080
100120140160180200220
SN-S
30
31
32
33
34
35
435
455
475
495
ULPED
SC-S, NC-SUL
(PSI)
-320.8 400 (°F)
UL
(bar)
-196 204 (°C)
-196 20 50 100 135 150 175 200 225 (°C)
Circuit 1 Circuit 2
-320.8 68 122 212 275 302 347 392 437 (°F)
24
26
28
30
32
34
36(bar)
PED
350370390410430450470490510
(PSI)
404244464850525456586062
-196 20 50 100 135 150 175 200 225
(bar)
(°C)
PED
-320.8 68 122 212 275 302 347 392 437 (°F)
580610640670700730760790820850880
(PSI) Pressure HPressure DSC-S, NC-S
-320.8-196 20 50 100 150 200 225 250 300 350
(bar)
(°C)
PED
68 122 212 302 392 437 482 572 662
(PSI)
(°F)
0
2
4
6
8
10
12
14
020406080
100120140160180200220
SN-S
30
31
32
33
34
35
435
455
475
495
ULPED
