Sure-Grip 3-Jaw Power Chucks - · PDF file5 Sure-Grip® 3-Jaw Power Chucks FEA Design...
Transcript of Sure-Grip 3-Jaw Power Chucks - · PDF file5 Sure-Grip® 3-Jaw Power Chucks FEA Design...
www.hardinge.com
Sure-Grip®
3-Jaw Power Chucks
TurninG MillinG GrindinG WorkholdinG roTArY
workholding
2
The hardinge Advantage
Workholding Design Expertise.Hardinge is committed to being your single source for all of your workholding and
industrial products for your material-cutting needs. Well known for high accuracy
and precision, Hardinge manufactures collets, step chucks, toolholders, CNC tooling,
collet chucks, 3-jaw power chucks and chuck jaws.
Hardinge designed the Sure-Grip® 3-Jaw Power
Chuck using Finite Element Analysis (FEA) to assure
a quality product. Hardinge chucks are lever-
operated, counter-centrifugal and dynamically
balanced to maintain jaw force. This chuck design
is superior to a non-counterbalanced, wedge-style
chuck that could be slowing down your removal
rates. Read about the Sure-Grip benefits over the
next few pages. Hardinge 3-Jaw Power Chucks and
Quick-Change Chucks are adaptable to all brands
of CNC lathes and are competitively priced.
For additional technical information or to place your
order call 800-843-8801, fax 607-734-3886 or visit
www.hardingetooling.com. Pricing and availability is
online at your fingertips, where it’s fast and easy to
place your order.
www.hardingetooling.com
LeverMaster Jaw
Counter Weight
Top Jaw
Pivot
DRAW
FOR
CE
F
F
F
D
• Lever-operated
• Counter-balanced with counter weight to take advantage of centifugalforce
•TIRaccuracyof.0005"
•Repeatabilityof.0005"
• Mechanicaladvantageoverwedge-stylechucks
Cover Photo: Hardinge 8" Sure-Grip Power Chuck mounted in the Hardinge GS 200 turning center.
3
TableofContents
Introduction—Lever-operated, Counterbalanced Design Lever-Operated ……………………………………………………… 4 Optimum Gripping Force ……………………………………………… 4 Large Thru-Hole ……………………………………………………… 4 Direct Mount ………………………………………………………… 4 FEA Analysis …………………………………………………………… 5 Spindle Adapters ……………………………………………………… 5 Master Jaws …………………………………………………………… 5 Soft and Hard Jaws …………………………………………………… 5
Sure-Grip® 3-Jaw Power Chucks 4" for all Horizontal CNC Lathes ……………………………………… 6 5" for all Horizontal CNC Lathes ……………………………………… 6 6" for all Horizontal CNC Lathes ……………………………………… 7 8" for all Horizontal CNC Lathes ……………………………………… 8 10" for all Horizontal CNC Lathes ……………………………………… 9 12" for all Horizontal CNC Lathes ……………………………………… 10 6" - 12" Big-bore for all Horizontal CNC Lathes ……………………… 11 6" - 12" for Hardinge Vertical CNC Lathes …………………………… 12 Hardinge Quick-Change Top Jaw Conversion Kits ……………………… 21
Quick-Change Sure-Grip 3-Jaw Power Chucks Introduction …………………………………………………………… 13 6" for all Horizontal CNC Lathes and Hardinge Vertical CNC Lathes … 14 8" for all Horizontal CNC Lathes and Hardinge Vertical CNC Lathes … 15 10" for all Horizontal CNC Lathes and Hardinge Vertical CNC Lathes … 16 12" for all Horizontal CNC Lathes and Hardinge Vertical CNC Lathes … 17 Hardinge Quick-Change Top Jaws ……………………………………… 21
Top Jaws Style P – 1.5mm x 60° Serrations – Aluminum, Steel & Soft …………… 18 Style J – 1⁄16" x 90° Serrations – Aluminum & Steel …………………… 19 Style Q Pie Jaws – 1.5mm x 60° Serrations – Aluminum ……………… 20 Style K Pie Jaws – 1⁄16" x 90° Serrations – Aluminum …………………… 20 Hardinge Quick-Change Top Jaws ……………………………………… 21 Quick-Change Conversion Kits for Sure-Grip Power Jaw Chucks ……… 21
Accessories Jaw Nuts (T-Nuts) and I-Beam Assemblies for 1.5mm x 60° Jaws ……… 22 Jaw Nuts (T-Nuts) for 1⁄16" x 90° Jaws ………………………………… 22
Collet Chucks Collet Chucks ………………………………………………………… 23
Sure-Grip Power Chuck partsarehardmilledonaspecialaccuracyHardingeVMC700verticalmachining center
4
Sure-Grip® 3-Jaw Power Chucks
Lever-Operated and Fully BalancedAll Sure-Grip Power Chucks are lever-operated, counter-centrifugal and dynam-
ically balanced. This enables you to continually operate your CNC lathe at higher
spindle speeds and feed rates with less concern for loss of jaw force normally
associated with other manufacturer’s chucks.
Direct MountSure-Grip Power Chucks mount
directly to all ANSI A2-4, A2-5, A2-6
and A2-8 spindles, eliminating the added
tolerance buildup when using special
adapter plates.
Large Thru-HoleSure-Grip Power Chucks have a large thru-hole
capacity to help reduce bar stock restrictions that
may be common to other power chucks. Refer to
the chuck specification charts on the following pages.
Optimum Gripping ForceUnlike conventional chucks
that are not counterbalanced,
the Sure-Grip Jaw Chuck with
its counterbalance feature
helps maintain optimum
gripping force at high RPM
as shown on these calculated
gripping charts shown at
the right.
4000
8000
12000
16000
20000
24000
28000
32000
3500300025002000150010005000
Spindle Speed (RPM)
Tota
l Gri
pp
ing
Fo
rce
(Lb
s.)
0
12" Power Chuck
10" Power Chuck
0
4000
8000
12000
16000
20000
24000
28000
32000
450040003500300025002000150010005000
Spindle Speed (RPM)
Tota
l Gri
pp
ing
Fo
rce
(Lb
s.)
4" Power Chuck
0
1000
2000
3000
4000
5000
6000
7000
8000
8000
7500
7000
6500
6000
5500
5000
4500
4000
3500
3000
2500
2000
1500
1000
5000
Spindle Speed (RPM)
Tota
l Gri
pp
ing
Fo
rce
(Lb
s.)
8" Power Chuck
0
2000
4000
6000
8000
10000
12000
14000
16000
18000
55005000450040003500300025002000150010005000
Spindle Speed (RPM)
Tota
l Gri
pp
ing
Fo
rce
(Lb
s.)
5" & 6" Power Chuck
0
2000
4000
6000
8000
10000
12000
14000
7000
6500
6000
5500
5000
4500
4000
3500
3000
2500
2000
1500
100050
00
5" Chuck
6" Chuck
Spindle Speed (RPM)
Tota
l Gri
pp
ing
Fo
rce
(Lb
s.)
Hardinge Grip Force Charts
5
Sure-Grip® 3-Jaw Power Chucks
FEA Design AnalysisFinite Element Analysis (FEA) techniques are used to design and build
Sure-Grip chucks to ensure optimum rigidity and fatigue life. Unique design
software accurately depicts the structural deflections, stress levels, thermal
response and vibration response of the assembled components.
Extreme case loadings are modeled in FEA to determine the effects. This
technique fine tunes the engineered design and aids in defining operating
specifications while verifying the chuck life expectancy.
Master JawsSure-Grip Power Chucks come standard with 1.5mm x 60° serrated master jaws designed to ISO specifications.
Other serrations are available on request.
Small Spindle to large Chuck large Spindle to Small Chuck
Spindle AdaptersSpindle Adapters are required when mounting a large chuck to a small spindle (i.e: A2-8 chuck
to an A2-6 spindle), or when mounting a small chuck to a large spindle (i.e.: A2-8 chuck to an
A2-11 spindle).
Soft (Aluminum & Steel) Standard, Pie Jaws® and Standard Hard JawsOne set of soft machinable top jaws is included with each Sure-
Grip Chuck. Hard serrated single-step, soft standard-height point-
ed, soft medium-height pointed and flat, and soft standard-height
flat jaws with 1.5mm x 60° serrations are available. Hardinge also
provides replacement jaws for other brands of chucks.
L
D
L
D
Spindle to Chuck Part Number D L
A2-5 to A2-6 SC-0000133 6.500" (165.10mm) 1.000" (25.40mm)
A2-6 to A2-8 SC-0000181 10.00" (254.00mm) 1.202" (30.53mm)
A2-11 to A2-8 SC-0000152 11.00" (279.40mm) 1.875" (47.63mm)
6
Hardinge® RS 42, ELITE 6/42, QUEST® 6/42,5" CHUCK Other Brands CONQUEST T42,SPECIFICATIONS of CNC Lathes COBRA® 42, CHNC®
Spindle Nose A2-5 A2-5Item Size (in/mm) 5/125 5/125Model Number CM2-305B-5 HM-305Part Number SCA-2200305-A25C SCA-2000305-A25HBlank Link Part Number SC-0000089 —Serrations 1.5mm x 60° 1.5mm x 60°Thru-Hole (in/mm) 1.580/40.13 1.668/42.00Jaw Stroke Diameter (in/mm) .194/4.92 .194/4.92Plunger Stroke (in/mm) .413/10.50 .413/10.50Maximum Draw Bar Pull (lb/N) 3,300/14,700 3,300/14,700Maximum Gripping Force (lb/N) 9,000/40,000 9,000/40,000Maximum RPM 7,000 7,000Approximate Weight (lb/kg) 17.00/7.70 17.00/7.70Moment of Inertia (lb-ft-sec2/kg-m2) .017/.023 .017/.023Max. Rec. Chucking Diameter (in/mm) 4.5/114.00 4.5/114.00Accuracy—TIR (in/mm) .0005/.0127 .0005/.0127Repeatability (in/mm) .0005/.0127 .0005/.0127Dynamic Balance G - 6.3 G - 6.3Optional Balance G - 2.5 G - 2.5
5" CHUCK DIMENSIONS (in/mm) Spindle Nose A2-5 A2-5B (Bolt Thread) 7/16 x 14/M10 x 1.5 7/16 x 14/M10 x 1.5D (Diameter) 5.500/140.00 5.500/140.00E .787/20.00 .787/20.00H (Thru-Hole) 1.580/40.13 1.668/42.00K 1.000/25.40 —L (Length) 3.198/81.22 3.198/81.22L1 Minimum .526/13.36 3.765/96.63L1 Maximum .937/23.79 4.178/106.12T (Thread) — 1.87" x 1.75mmW 1.000/25.40 1.000/25.40X Start (External Gripping) 1.643/41.73 1.643/41.73
5" Chuck for Hardinge CNC Lathes:
5" Chuck for Other Brands of CNC Lathes:
Hardinge®
4" CHUCK ELITE® 27 MS,SPECIFICATIONS QUEST® GTSpindle Nose A2-4Item Size (in/mm) 4/100Model Number HM-304Part Number SCA-2000304-A24HSerrations 1.5mm x 60°Thru-Hole (in/mm) 1.078/27.38Jaw Stroke Diameter (in/mm) .186/4.72Plunger Stroke (in/mm) .375/9.52Maximum Draw Bar Pull (lb/N) 3,300/14,700Maximum Gripping Force (lb/N) 8,400/37,360Maximum RPM 8,000Approximate Weight (lb/kg) 13.50/6.10Moment of Inertia (lb-ft-sec2/kg-m2) .009/.012Max. Rec. Chucking Diameter (in/mm) 3.800/96.52Accuracy—TIR (in/mm) .0005/.0127Repeatability (in/mm) .0005/.0127Dynamic Balance G - 6.3Optional Balance G - 2.5
4" CHUCK DIMENSIONS (in/mm) Spindle Nose A2-4B (Bolt Thread) 7/16 x 14/M10 x 1.5D (Diameter) 4.881/124.00E .551/14.00H (Thru-Hole) 1.078/27.38L (Length) 3.187/80.94L1 Minimum 2.960/75.18L1 Maximum 3.340/84.83T (Thread) 1.238 x 20mmW 1.000/25.40X Start (External Gripping) 1.424/36.16
4" Chuck for Hardinge CNC Lathe:
Special Wrench
4"&5"Sure-GripPowerChucks forallHorizontalCNCLathes
7
Hardinge RS 42, Hardinge RS 51, ELITE® & QUEST® 6/42, ELITE & QUEST 8/51, Hardinge® CONQUEST® T42, COBRA 51, 6" CHUCK Other Brands SV 150, GS 150, COBRA® 42, CHNC,® CONQUEST T51, Hardinge Hardinge QUESTSPECIFICATIONS of CNC Lathes Talent® 6/45 SUPERSLANT® T42 Big Bore SR 150 TwinTurn® 65Spindle Nose A2-5 A2-5 A2-5 A2-6 A2-6 A2-6 Item Size (in/mm) 6/150 6/150 6/150 6/150 6/150 6/150Model Number CM2-306C-5 HM-306-5T HM-306 HM-306-6L HM-306-SR HM-306-6Part Number SCA-2300306-A25C SC-2300306-A25T SCA-2000306-A25H SCA-2000306-A26L SC-2000306-A6SR SCA-2000306-A26HBlank Link Part Number SC-0000339 — — — — —Serrations 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60°Thru-Hole (in/mm) 2.050/52.00 1.850/46.99 1.668/42.00 2.046/52.00 2.046/52.00 2.156/54.70Jaw Stroke Diameter (in/mm) .220/5.58 .220/5.58 .218/5.50 .220/5.58 .220/5.58 .220/5.58Plunger Stroke (in/mm) .498/12.60 .498/12.60 .472/11.98 .498/12.60 .498/12.60 .498/12.60Maximum Draw Bar Pull (lb/N) 4,500/20,000 4,500/20,000 4,500/20,000 4,500/20,000 4,500/20,000 4,500/20,000Maximum Gripping Force (lb/N) 13,000/58,000 13,000/58,000 13,000/58,000 13,000/58,000 13,000/58,000 13,000/58,000Maximum RPM 7,000 7,000 6,700 6,500 6,500 6,500Approximate Weight (lb/kg) 27.30/12.40 27.30/12.40 28.00/12.70 28.00/12.70 28.00/12.70 28.00/12.70Moment of Inertia (lb-ft-sec2/kg-m2) .035/.047 .035/.047 .038/.051 .035/.047 .035/.047 .035/.047Max. Rec. Chucking Dia. (in/mm) 5.500/139.00 5.500/139.00 5.500/139.00 5.650/144.00 5.650/144.00 5.650/144.00Accuracy—TIR (in/mm) .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127Repeatability (in/mm) .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127Dynamic Balance G - 6.3 G - 6.3 G - 6.3 G - 6.3 G - 6.3 G - 6.3Optional Balance G - 2.5 G - 2.5 G - 2.5 G - 2.5 G - 2.5 G - 2.5
6" CHUCK DIMENSIONS (in/mm) Spindle Nose A2-5 A2-5 A2-5 A2-6 A2-6 A2-6 B (Bolt Thread) 7/16 x 14/M10 x 1.5 7/16 x 14/M10 x 1.5 7/16 x 14/M10 x 1.5 M12 x 1.75 M12 x 1.75 M12 x 1.75D (Diameter) 6.650/169.00 6.650/169.00 6.500/165.00 6.650/169.00 6.650/169.00 6.650/169.00E .787/20.00 .787/20.00 .787/20.00 .787/20.00 .787/20.00 .787/20.00H (Thru-Hole) 2.050/52.00 1.850/46.99 1.668/42.00 2.046/52.00 2.046/52.00 2.156/54.70K 1.000/25.40 — — — — — L (Length) 3.678/93.42 3.678/93.42 3.678/93.42 3.678/93.42 3.678/93.42 3.678/93.42L1 Minimum .520/13.20 .520/13.20 3.581/90.90 5.660/143.80 4.880/124.00 2.540/65.40L1 Maximum 1.000/25.40 1.000/25.40 4.063/103.20 6.139/155.90 5.650/143.50 3.040/77.20T (Thread) — M55 X 2.0mm 1.87" x 1.75mm M60 x 1.5mm M60 x 1.5mm M73 x 1.5mmW 1.250/32.00 1.250/32.00 1.250/32.00 1.250/32.00 1.250/32.00 1.250/32.00X Start (External Gripping) 2.127/54.00 2.127/54.00 1.866/47.90 2.127/54.00 2.127/54.00 2.127/54.00
Chuck for Hardinge SV 150, GS 150, Talent 6/45 Lathes: Chuck for other Hardinge CNC Lathes:
Chuck for Other Brands of CNC Lathes: Chuck for Hardinge QUEST TwinTurn Lathes:
L
Ref.
Ref.
Ref.
These 6" chucks can be mounted
with Quick-Change Sure-Grip Top Jaws!
See page 21 for corresponding Quick-Change Top Jaws and Conversion Kit
Numbers.
6"Sure-GripPowerChucks forallHorizontalCNCLathes
8
Hardinge RS 42, Hardinge RS 51, ELITE® 6/42, ELITE 8/51, COBRA 51, Hardinge® Other Brands QUEST® 6/42, QUEST 8/51 Hardinge RS 65, Hardinge 8" CHUCK Other Brands SV 200, GS 200, of Large Bore CONQUEST® T42 CONQUEST T51 QUEST 10/65 GS 200/66, HardingeSPECIFICATIONS CNC Lathes Talent® 8/52 CNC Lathes COBRA® 42 and T42 Big-Bore 25C Talent® 8/66 SR 200Spindle Nose A2-6 A2-6 A2-6 A2-5 to A2-6 A2-6 A2-6 A2-6 A2-6Item Size (in/mm) 8/200 8/200 8/200 8/200 8/200 8/200 8/200 8/200Model Number CM2-308B-6 HM-308-6T CM2-308C-6 HM-308-5 HM-308 HMQ-308 HM-308C-6T HM-308C-SRPart Number SCA-2200308-A26C SC-2200308-A26T SC-2300308-A26C SCA-2000308-A25H SCA-2000308-A26H SC-2000308-A26Q SC-2300308-A26T SC-2300308-A6SRBlank Link Part Number SC-0000389 — SC-0000522 — — — — —Spindle Adapter Part Number — — — SC-0000133 — — — —Serrations 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60°Thru-Hole (in/mm) 2.188/55.57 2.047/51.99 2.696/68.47 1.668/42.00 2.050/52.00 2.050/52.00 2.696/68.47 2.596/66.00Jaw Stroke Diameter (in/mm) .312/7.90 .312/7.90 .312/7.90 .312/7.90 .312/7.90 .312/7.90 .312/7.90 .312/7.90Plunger Stroke (in/mm) .565/14.30 .565/14.30 .565/14.30 .565/14.30 .565/14.30 .565/14.30 .565/14.30 .565/14.30Maximum Draw Bar Pull (lb/N) 7,000/31,000 7,000/31,000 7,000/31,000 6,500/29,000 7,000/31,000 7,000/31,000 7,000/31,000 7,000/31,000Maximum Gripping Force (lb/N) 19,000/84,500 19,000/84,500 19,000/84,500 17,500/78,000 19,000/84,500 19,000/84,500 19,000/84,500 19,000/84,500Maximum RPM 5,500 5,500 5,000 5,500 5,500 5,500 5,000 5,000Approximate Weight (lb/kg) 48.00/21.70 48.00/21.70 54.00/24.40 48.00/21.70 48.00/21.70 48.00/21.70 54.00/24.40 54.00/24.40Moment of Inertia (lb-ft-sec2/kg-m2) .101/.137 .101/.137 .120/.150 .101/.137 .101/.137 .101/.137 .120/.150 .120/.150Max Rec. Chucking Dia (in/mm) 7.250/184.00 7.250/184.00 8.000/203.00 7.250/184.00 7.250/184.00 7.250/184.00 8.000/203.00 8.000/203.00Accuracy—TIR (in/mm) .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127Repeatability (in/mm) .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127Dynamic Balance G - 6.3 G - 6.3 G - 6.3 G - 6.3 G - 6.3 G - 6.3 G - 6.3 G - 6.3Optional Balance G - 2.5 G - 2.5 G - 2.5 G - 2.5 G - 2.5 G - 2.5 G - 2.5 G - 2.5
8" CHUCK DIMENSIONS (in/mm) Spindle Nose A2-6 A2-6 A2-6 A2-5 to A2-6 A2-6 A2-6 A2-6 A2-6B (Bolt Thread) 1⁄2 x 13/M12 x 1.75 1⁄2 x 13/M12 x 1.75 1⁄2 x 13/M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 1⁄2 x 13/M12 x 1.75 1⁄2 x 13/M12 x 1.75D (Diameter) 8.250/210.00 8.250/210.00 8.960/227.50 8.250/210.00 8.250/210.00 8.250/210.00 8.960/227.50 8.960/227.60E .984/25.00 .984/25.00 .984/25.00 .984/25.00 .984/25.00 .984/25.00 .984/25.00 .984/125.00H (Thru-Hole) 2.188/55.57 2.047/51.99 2.696/68.48 1.668/42.00 2.050/52.00 2.050/52.00 2.696/68.48 2.596/66.00K 1.000/25.40 — 1.194/30.32 — — — .840/21.34 —L (Length) 4.115/104.50 4.115/104.50 4.120/104.65 4.115/104.50 4.115/104.50 4.115/104.50 4.120/104.65 4.120/104.65L1 Minimum .625/15.87 .625/15.87 .710/18.03 4.591/116.60 5.252/133.40 5.252/133.40 — 5.762/146.00L1 Maximum 1.179/30.00 1.179/30.00 1.263/32.08 5.156/130.96 5.817/147.75 5.817/147.75 — 6.339/161.00T (Thread) — M60 X 2.0mm — 1.87" x 1.75mm M60 x 1.5mm M60 x 1.5mm M74 x 2mm M73 x 1.5mmW 1.500/38.00 1.500/38.00 1.500/38.00 1.500/38.00 1.500/38.00 1.500/38.00 1.500/38.00 1.500/38.00X-Start (External Gripping) 2.720/69.10 2.720/69.10 2.700/68.50 2.325/59.00 2.325/59.00 2.325/59.00 2.700/68.50 2.700/68.50
Chuck for Hardinge SV 200, GS 200, Talent 8/52 Lathes: Chuck for Hardinge Talent 8/66, GS200/66 CNC Lathes: Chuck for Other Brands of CNC Lathes:
Chuck for Hardinge SR 200 Lathes: Chuck for other Hardinge CNC Lathes:
SpecialWrench
A2-6 Spindle
These 8" chucks can be mounted with
Quick-Change Sure-Grip Top Jaws!
See page 21 for corresponding Quick-
Change Top Jaws and Conversion Kit
Numbers.
8"Sure-GripPowerChucks forallHorizontalCNCLathes
A2-5 Spindle
Ref.
Ref.SpecialWrench
9
Hardinge RS 51, QUEST® and ELITE® 8/51, Hardinge Hardinge® Other Brands COBRA® 51, COBRA 65 Hardinge RS 65 10" CHUCK Other Brands GS 250, Talent® of Large Bore CONQUEST® T51 CONQUEST T65 QUEST 10/65 Hardinge SPECIFICATIONS CNC Lathes 10/78 CNC Lathes CNC Lathes and T42 Big-Bore and T51 Big-Bore 25C SR 250Spindle Nose A2-8 A2-8 A2-8 A2-6 to A2-8 A2-8 A2-6 A2-8Item Size (in/mm) 10/250 10/250 10/250 10/250 10/250 10/250 10/250Model Number CM2-310B-8 TM2-310B-8 CM2-310C-8 HM-310-6 HM-310-8 HMQ-310-6 HM-310-SRPart Number SCC-2200310-A28C SC-2200310-A28T SCA-2300310-A28C SCD-2000310-A26H SCD-2000310-A28H SCA-2000310-A26Q SC-2300310-A8SRBlank Link Part Number SC-0000489 — SC-0000553 — — — —Spindle Adapter Part Number — — — SC-0000181 — — —Serrations 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60°Thru-Hole (in/mm) 3.075/78.10 3.075/78.10 3.616/91.84 2.050/52.07 2.595/65.91 2.595/65.91 3.616/91.84Jaw Stroke Diameter (in/mm) .374/9.49 .374/9.49 .374/9.49 .400/10.16 .400/10.16 .400/10.16 .374/9.49Plunger Stroke (in/mm) .800/20.32 .800/20.32 .800/20.32 .858/21.79 .858/21.79 .858/21.79 .800/20.32Maximum Draw Bar Pull (lb/N) 11,000/48,930 11,000/48,930 11,000/48,930 11,000/48,930 11,000/48,930 11,000/48,930 11,000/48,930Maximum Gripping Force (lb/N) 31,500/140,110 31,500/140,110 31,500/140,110 31,500/140,110 31,500/140,110 31,500/140,110 31,500/140,110Maximum RPM 4,500 4,500 4,200 4,500 4,500 4,500 4,200Approximate Weight (lb/kg) 78.00/35.40 78.00/35.40 89.00/40.50 75.00/34.00 78.00/35.40 75.00/34.00 89.00/40.5Moment of Inertia (lb-ft-sec2/kg-m2) .223/.303 .223/.303 .250/.330 .225/.304 .225/.304 .225/.304 .250/.330Max Rec. Chucking Dia (in/mm) 9.00/228.00 9.00/228.00 9.50/241.00 9.00/228.00 9.00/228.00 9.00/228.00 9.50/241.00Accuracy—TIR (in/mm) .0008/.0203 .0008/.0203 .0008/.0203 .0008/.0203 .0008/.0203 .0008/.0203 .0008/.0203Repeatability (in/mm) .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127Dynamic Balance G - 6.3 G - 6.3 G - 6.3 G - 6.3 G - 6.3 G - 6.3 G - 6.3Optional Balance G - 2.5 G - 2.5 G - 2.5 G - 2.5 G - 2.5 G - 2.5 G - 2.5
10" CHUCK DIMENSIONS (in/mm) Spindle Nose A2-8 A2-8 A2-8 A2-6 to A2-8 A2-8 A2-6 A2-8B (Bolt Thread) 5⁄8 x 11/M16 x 2 5⁄8 x 11/M16 x 2 5⁄8 x 11/M16 x 2 5⁄8 x 11/M16 x 2 5⁄8 x 11/M16 x 2 5⁄8 x 11/M16 x 2 5⁄8 x 11/M16 x 2D (Diameter) 10/254 10/254 10.5/266 10/254 10/254 10/254 10.5/266E 1.187/30.14 1.187/30.14 1.187/30.14 1.187/30.14 1.187/30.14 1.187/30.14 1.187/30.14H (Thru-Hole) 3.075/78.10 3.075/78.10 3.616/91.84 2.050/52.07 2.595/65.91 2.595/65.91 3.616/91.84K .960/24.38 .960/24.38 1.00/25.40 — — — 1.00/25.40L (Length) 5.025/127.63 5.025/127.63 5.025/127.63 5.025/127.63 5.025/127.63 5.025/127.63 5.025/127.63L1 Minimum .690/17.52 .690/17.52 .740/18.79 6.810/172.97 6.810/172.97 6.810/172.97 —L1 Maximum 1.490/37.84 1.490/37.84 1.520/38.60 7.660/194.56 7.660/194.56 7.660/194.56 —T (Thread) — — — M60 x 1.5mm M60 x 1.5mm M60 x 1.5mm M87 x 2mmW 1.750/44.45 1.750/44.45 1.750/44.45 1.750/44.45 1.750/44.45 1.750/44.45 1.750/44.45X-Start (External Gripping) 3.185/80.89 3.185/80.89 3.440/87.37 2.825/71.75 2.825/71.75 2.825/71.75 3.440/87.37
Chuck for Hardinge CNC Lathes:
Chuck for Hardinge GS 250, Talent CNC Lathe and Other Brands of CNC Lathes:
A2-8 Spindle
B
L
D H
K
LRef.
1
E
X
W
These 10" chucks can be mounted with
Quick-Change Sure-Grip Top Jaws!
See page 21 for corresponding Quick-
Change Top Jaws and Conversion Kit
Numbers.
10"Sure-GripPowerChucks forallHorizontalCNCLathes
B
L
D H
K
LRef.
1
E
X
W
B
L
D H
K
LRef.
1
E
X
W
A2-6 Spindle
Talent & SR 250 A2-8 Spindle Other Brands
SpecialWrench
10
BL
D H
K
LRef.
1
E
X
W
Standard 12" chucks can be mounted with Quick-Change
Sure-Grip Top Jaws!
See page 21 for corresponding Quick-Change Top Jaws
and Conversion Kit Numbers.
Hardinge COBRA® 6512" CHUCK Other Brands CONQUEST® T65SPECIFICATIONS of CNC Lathes and T51 Big-BoreSpindle Nose A2-8 A2-8Item Size (in/mm) 12/300 12/300Model Number CM2-312C-8 HM-312C-8Part Number SCA-2300312-A28C SCA-2300312-A28HSpindle Adapter Part Number — —Blank Link Part Number SC-0000419 —Serrations 1.5mm x 60° 1.5mm x 60°Thru-Hole (in/mm) 3.800/96.52 2.595/66.00Jaw Stroke Diameter (in/mm) .420/10.66 .420/10.66Plunger Stroke (in/mm) .895/22.70 .895/22.70Maximum Draw Bar Pull (lb/N) 12,000/53,000 12,000/53,000Maximum Gripping Force (lb/N) 32,000/142,000 32,000/142,000Maximum RPM 3,500 3,500Approximate Weight (lb/kg) 127.00/57.60 127.00/57.60Moment of Inertia (lb-ft-sec2/kg-m2) .470/.640 .470/.640Max. Rec. Chucking Diameter (in/mm) 11.000/279.40 11.000/279.40Accuracy—TIR (in/mm) .0010/.0254 .0010/.0254Repeatability (in/mm) .0008/.0200 .0008/.0200
12" CHUCK DIMENSIONS (in/mm) Spindle Nose A2-8 A2-8Bolt Thread 5/8 x 11/M16 x 2 M16 x 2D (Diameter) 12/300 12/300E 1.181/30.00 1.181.30.00H (Thru-Hole) 3.800/96.52 2.595/66.00K .960/24.40 —L (Length) 5.440/138.00 5.440/138.00L1 Minimum .780/19.80 5.510/140.00L1 Maximum .1.670/42.40 6.400/162.00T (Thread) — M73 x 1.5mmW 2.000/50.80 2.000/50.80X Start (External Gripping) 3.420/86.87 3.420/86.87
Chuck for Other Brands of CNC Lathes:
Chuck for Hardinge CNC Lathes:
12"Sure-GripPowerChucks forallHorizontalCNCLathes
SpecialWrench
11
6" Chucks 8" Chucks 10" Chucks 12" ChucksBIG-BORE CHUCK for Other Brands for Other Brands for Other Brands for Other BrandsSPECIFICATIONS of CNC Lathes of CNC Lathes of CNC Lathes of CNC LathesSpindle Nose A2-5 A2-6 A2-8 A2-8Item Size (in/mm) 6/150 8/200 10/250 12/300Model Number CM2-306C-5 CM2-308C-6 CM2-310C-8 CM2-312C-8Part Number SCA-2300306-A25C SC-2300308-A26C SCA-2300310-A28C SCA-2300312-A28CBlank Link Part Number SC-0000339 SC-0000522 SC-0000553 SC-0000419Serrations 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60°Thru-Hole (in/mm) 2.050/52.00 2.696/68.47 3.616/91.84 3.800/96.52Jaw Stroke Diameter (in/mm) .220/5.58 .312/7.90 .374/9.49 .420/10.66Plunger Stroke (in/mm) .498/12.60 .565/14.30 .800/20.32 .895/22.70Maximum Draw Bar Pull (lb/N) 4,500/20,000 7,000/31,000 11,000/48,930 12,000/53,000Maximum Gripping Force (lb/N) 13,000/58,000 19,000/84,500 31,500/140,110 32,000/142,000Maximum RPM 7,000 5,000 4,200 3,500Approximate Weight (lb/kg) 27.30/12.40 54.00/24.40 89.00/40.50 127.00/57.60Moment of Inertia (lb-ft-sec2/kg-m2) .035/.047 .120/.150 .250/.330 .470/.640Max. Rec. Chucking Diameter (in/mm) 5.50/139.00 8.00/203.00 9.50/241.00 11.000/279.40Accuracy—TIR (in/mm) .0005/.0127 .0005/.0127 .0008/.0203 .0010/.0254Repeatability (in/mm) .0005/.0127 .0005/.0127 .0005/.0127 .0008/.0200Dynamic Balance G - 6.3 G - 6.3 G - 6.3 — Optional Balance G - 2.5 G - 2.5 G - 2.5 —
BIG-BORE CHUCK DIMENSIONS (in/mm) Spindle Nose A2-5 A2-6 A2-8 A2-8B (Bolt Thread) 7/16 x 14/M10 x 1.5 1/2 x 13/M12 x 1.75 5/8 x 11/M16 x 2 5/8 x 11/M16 x 2D (Diameter) 6.650/169.00 8.960/227.50 10.5/266 12/300E .787/20.00 .984/25.00 1.181/30.14 1.181/30.00H (Thru-Hole) 2.050/52.00 2.696/68.48 3.616/91.84 3.800/96.52K 1.000/25.40 1.194/30.32 1.000/25.40 .960/24.40L (Length) 3.678/93.42 4.120/104.65 5.025/127.63 5.440/138.00L1 Minimum .520/13.20 .710/18.03 .740/18.79 .780/19.80L1 Maximum 1.000/25.40 1.263/32.08 1.520/38.60 1.670/42.40W 1.250/32.00 1.500/38.00 1.750/44.45 2.000/50.80X Start (External Gripping) 2.127/54.00 2.700/68.50 3.440/87.37 3.420/86.87
6" Chuck for Other Brands of CNC Lathes: 8" Chuck for Other Brands of CNC Lathes:
10" Chuck for Other Brands of CNC Lathes: 12" Chuck for Other Brands of CNC Lathes:
These Big-Bore chucks can be mounted with Quick-Change Sure-Grip Top Jaws!See page 21 for corresponding Quick-Change Top Jaws and Conversion Kit Numbers.
Big-Bore Power Chucks forallHorizontalCNCLathes
Ref.
B
L
D H
K
LRef.
1
E
X
W
BL
D H
K
LRef.
1
E
X
W
Special Wrenchused with all
Chucks this page.
12
6" Vertical 8" Vertical 10" Vertical 10" for Hardinge 10" for Hardinge 12" for Hardinge 12" for HardingeVERTICAL CHUCK HARDINGE-EMAG HARDINGE-EMAG HARDINGE-EMAG CONQUEST® VT100 CONQUEST VT200 CONQUEST VT100 CONQUEST VT200SPECIFICATIONS VL3 VL5 VL5 Vertical Lathe Vertical Lathe Vertical Lathe Vertical LatheSpindle Nose A2-5/Din5 A2-6 A2-6 A2-8 A2-11 to A2-8 A2-8 A2-11 to A2-8Item Size (in/mm) 6.65/169 8/200 10/250 10/250 10/250 12/300 12/300Model Number CM2-306-5E HM-308-6E HM-310-6E HVM-310-8 HVM-310-11 HVM-312C-8 HVM-312C-11Part Number SCA-2300306-A25E SC-2200308-A26E SC-2200310-A26E SCC-2000310-A28V SCC-2000310-A11V SCA-2300312-A28V SCA-2300312-A11VSpindle Adapter Part Number SC-0000588 — — — SC-0000152 — SC-0000152Serrations 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60°Thru-Hole (in/mm) — — — 1.500/38.00 1.500/38.00 1.500/38.00 1.500/38.00Jaw Stroke Diameter (in/mm) .220/5.58 .312/7.90 .400/10.16 .400/10.10 .400/10.10 .420/10.66 .420/10.66Plunger Stroke (in/mm) .498/12.60 .565/14.30 .858/21.79 .858/21.80 .858/21.80 .895/22.70 .895/22.70Maximum Draw Bar Pull (lb/N) 4500/20,000 7,000/31,000 11,000/48,930 11,000/48,930 11,000/48,930 12,000/53,000 12,000/53,000Maximum Gripping Force (lb/N) 13,000/58,000 19,000/84,500 31,500/140,110 31,500/140,110 31,500/140,110 32,000/142,000 32,000/142,000Maximum RPM 7,000 5,500 4,500 4,500 4,500 3,500 3,500Approximate Weight (lb/kg) 27.30/12.40 48.00/21.70 75.00/34.00 78.00/35.40 78.00/35.40 127.00/57.60 127.00/57.60Moment of Inertia (lb-ft-sec2/kg-m2) .035/.047 .101/.137 .225/.304 .225/.304 .225/.304 .470/.640 .470/.640Max. Rec. Chucking Dia (in/mm) 5.500/139.00 7.250/184.00 9.000/228.00 9.000/228.00 9.000/228.00 11.000/279.40 11.000/279.40Accuracy—TIR (in/mm) .0005/.0127 .0005/.0127 .0008/.0203 .0008/.0200 .0008/.0200 .0010/.0254 .0010/.0254Repeatability (in/mm) .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0008/.0200 .0008/.0200Dynamic Balance G-6.3 G-6.3 G-6.3 G - 6.3 G - 6.3 — —Optional Balance G-2.5 G-2.5 G-2.5 G - 2.5 G - 2.5 — —
VERTICAL CHUCK DIMENSIONS (in/mm) Spindle Nose A2-5/Din 5 A2-6 A2-6 A2-8 A2-11 to A2-8 A2-8 A2-11 to A2-8B (Bolt Thread) M10 x 1.5 M12 x 1.75 5⁄8 x 11/M16 x 2 M16 x 2 M16 x 2 M16 x 2 M16 x 2D (Diameter) 6.650/169.00 8.250/210.00 10/254 10/250 10/250 12/300 12/300E .787/20.00 .984/25.00 1.187/30.14 1.187/30.00 1.187/30.00 1.181/30.00 1.181/30.00H (Thru-Hole) — — — 1.500/38.00 1.500/38.00 1.500/38.00 1.500/38.00L (Length) 3.678/93.42 4.115/104.50 5.025/127.63 5.025/127.60 5.025/127.60 5.440/138.00 5.440/138.00L1 Minimum 2.378/60.40 5.000/127.00 6.810/172.97 2.210/56.10 4.080/103.60 2.394/60.80 4.011/101.80L1 Maximum 2.858/72.60 5.565/141.35 7.660/194.56 3.050/77.40 4.920/124.90 3.289/83.54 4.906/124.60T (Thread) M16 x 2.0mm M20 x 2.5mm M20 x 2.5mm M50 x 1.5mm M50 x 1.5mm M50 x 1.5mm M50 x 1.5mmW 1.250/32.00 1.500/38.00 1.750/44.45 1.750/44.40 1.750/44.40 2.000/50.80 2.000/50.80X Start (External Gripping) 2.127/54.00 2.325/59.00 2.825/71.75 2.825/71.70 2.825/71.70 3.420/86.87 3.420/86.87
12" Chuck for hardinge Vertical CnC lathes:10" Chuck for hardinge Vertical CnC lathes:
These Vertical chucks can be mounted with Quick-Change Sure-Grip Top Jaws!See page 21 for corresponding Quick-Change Top Jaws and Conversion Kit Numbers.
6.65" Chuck for hArdingE-EMAg Vl3 Vertical CnC lathes:
10" Chuck for hArdingE-EMAg Vl5 Vertical CnC lathes:
8" Chuck for hArdingE-EMAg Vl5 Vertical CnC lathes:
VerticalPowerChucks for hardinge®VerticalCNCLathes
T
L
1.407
T
L
D
1
L
Ref.
13
•RevolutionaryQuick-Changetop jaw design (patented)
•Eachtopjawchangeswiththesimple turn of a single locking bolt in less than one minute (much faster than conven-tional jaws)
•Lever-operatedforhighgrip force
•Hardinge-designedsafetyfeature utilizes centrifugal force and a unique locking system, eliminating the possibility of the quick-change jaws coming off during operation
•Counter-centrifugaldesignprovides for least grip force loss
•6",8",10"and12"direct-mountchucks
•Largermachineablejawareaallows a greater variety of workpieces to be held than with conventional chucks
•Masterjawserrations 1.5mm x 60°
•Nospecialtoolsrequired
•Willacceptstandardjaws
Available for All Brands of CNC
Lathes!
Increase efficiency and profitabilitywhile maintaining accuracy!
Quick-Change Sure-Grip® Chucks
14
Ref.
Hardinge RS 42, Hardinge RS 51, QUEST® and ELITE® 6/42 QUEST and Hardinge® CONQUEST® T42 ELITE 8/51, COBRA 51, Hardinge 6" QUICK-CHANGE CHUCK Other Brands SV 150, GS 150, COBRA® 42, CHNC,® CONQUEST T51 QUEST® HARDINGE-EMAG HardingeSPECIFICATIONS of CNC Lathes Talent 6/45 SUPERSLANT® and T42 Big Bore TwinTurn® 65 VL3 Sr 150Spindle Nose A2-5 A2-5 A2-5 A2-6 A2-6 A2-5/Din 5 A2-6Item Size (in/mm) 6/150 6/150 6/150 6/150 6/150 6.65/169 6/150Model Number CM2-306C-5Q HM-306-5TQ HM-306-Q HM-306-6LQ HM-306-6Q CM2-306E-5Q HM-306-SRQPart Number SC-2370306-A25C SC-2370306-A25T SC-2070306-A25H SC-2070306-A26L SC-2070306-A26H SCA-2370306-A25E SC-2070306-A6SRBlank Link Part Number SC-0000339 — — — — — —Serrations 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60°Thru-Hole (in/mm) 2.050/52.00 1.850/46.99 1.668/42.00 2.046/52.00 2.156/54.70 — 2.046/52.00Jaw Stroke Diameter (in/mm) .220/5.58 .220/5.58 .218/5.50 .220/5.58 .220/5.58 .220/5.58 .220/5.58Plunger Stroke (in/mm) .498/12.60 .498/12.60 .472/11.98 .498/12.60 .498/12.60 .498/12.60 .498/12.60Maximum Draw Bar Pull (lb/N) 4,500/20,000 4,500/20,000 4,500/20,000 4,500/20,000 4,500/20,000 4,500/20,000 4,500/20,000Maximum Gripping Force (lb/N) 13,000/58,000 13,000/58,000 13,000/58,000 13,000/58,000 13,000/58,000 13,000/58,000 13,000/58,000Maximum RPM 7,000 7,000 6,700 6,500 6,500 7,000 6,500Approximate Weight (lb/kg) 27.30/12.40 27.30/12.40 28.00/12.70 28.00/12.70 28.00/12.70 27.30/12.40 28.00/12.70Moment of Inertia (lb-ft-sec2/kg-m2) .035/.047 .035/.047 .038/.051 .035/.047 .035/.047 .035/.047 .035/.047Max. Rec. Chucking Dia. (in/mm) 5.500/139.00 5.500/139.00 5.500/139.00 5.650/144.00 5.650/144.00 5.500/139.00 5.650/144.00Accuracy—TIR (in/mm) .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127Repeatability (in/mm) .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127Dynamic Balance G - 6.3 G - 6.3 G - 6.3 G - 6.3 G - 6.3 G - 6.3 G - 6.3Optional Balance G - 2.5 G - 2.5 G - 2.5 G - 2.5 G - 2.5 G - 2.5 G - 2.5Top Jaw Model Number 6MQP2 6MQP2 6MQP1 6MQP3 6MQP3 6MQP2 6MQP3Top Jaw Part Number SC-2000747 SC-2000747 SC-2000741 SC-2000746 SC-2000746 SC-2000747 SC-2000746
6" QUICK-CHANGE CHUCK DIMENSIONS Spindle Nose A2-5 A2-5 A2-5 A2-6 A2-6 A2-5/Din 5 A2-6B (Bolt Thread) 7⁄16 x 14/M10 x 1.5 7⁄16 x 14/M10 x 1.5 7⁄16 x 14/M10 x 1.5 M12 x 1.75 M12 x 1.75 7⁄16 x 14/M10 x 1.5 M12 x 1.75D (Diameter) 6.650/169.00 6.650/169.00 6.500/165.00 6.650/169.00 6.650/169.00 6.650/169.00 6.650/169.00H (Thru-Hole) 2.050/52.00 1.850/46.99 1.668/42.00 2.046/52.00 2.156/54.70 — 2.046/52.00K 1.000/25.40 — — — — — —L (Length) 3.678/93.42 3.678/93.42 3.678/93.42 3.678/93.42 3.678/93.42 3.678/93.42 3.678/93.42L1 Minimum .520/13.20 .520/13.20 3.581/90.90 5.660/143.80 2.540/65.40 2.378/60.40 4.880/124.00L1 Maximum 1.000/25.40 1.000/25.40 4.063/103.20 6.139/155.90 3.040/77.20 2.858/72.60 5.650/143.50T (Thread) — M55 x 2.0mm 1.87" x 1.75mm M60 x 1.5mm M73 x 1.5mm M16 x 2.0mm M60 x 1.5W 1.250/32.00 1.250/32.00 1.250/32.00 1.250/32.00 1.250/32.00 1.250/32.00 1.250/32.00X Start (External Gripping) 2.0977/53.00 2.0977/53.00 1.946/49.42 2.097/53.26 2.097/53.26 2.097/53.26 2.097/53.26See page 21 for corresponding Quick-Change Sure-Grip Top Jaw specifications.
Chucks for other Hardinge CNC Lathes:
Chuck for HARDINGE-EMAG VL3:Chuck for Hardinge SV 150, GS 150, Talent 6/45:
6"Quick-ChangePowerChucks forallHorizontal&VerticalCNCLathes
Chuck for Other Brands of CNC Lathes:
Ref.Ref.
T
L
L
15
Hardinge RS 42, Hardinge RS 51,
QUEST® and QUEST and Other Brands Hardinge® ELITE® 6/42, ELITE 8/51, COBRA 51, Hardinge RS 65 Hardinge8" QUICK-CHANGE CHUCK Other Brands of Large Bore SV 200, GS 200, CONQUEST® T42 CONQUEST® T51 QUEST® 10/65 HARDINGE-EMAG GS 200/66 HardingeSPECIFICATIONS CNC Lathes CNC Lathes Talent® 8/52 COBRA® 42 and T42 Big-Bore 25C VL5 Talent 8/66 SR 200Spindle Nose A2-6 A2-6 A2-6 A2-5 to A2-6 A2-6 A2-6 A2-6 A2-6 A2-6Item Size (in/mm) 8/200 8/200 8/200 8/200 8/200 8/200 8/200 8/200 8/200Model Number CM2-308B-6Q CM2-308C-6Q HM-308-6TQ HM-308-5Q HM-308Q HMQ-308-Q HM-308-6EQ HMQ-308C-6T HM-308C-SRQPart Number SC-2270308-A26C SC-2370308-A26C SC-2270308-A26T SC-2070308-A25H SC-2070308-A26H SC-2070308-A26Q SC-2270308-A26E SC-2370308-A26T SC-2370308-A6SRBlank Link Part Number SC-0000389 SC-0000522 — — — — — — —Spindle Adapter Part Number — — — SC-0000133 — — — — —Serrations 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60°Thru-Hole (in/mm) 2.188/55.57 2.696/68.47 2.047/51.99 1.668/42.00 2.050/52.00 2.595/66.00 — 2.696/68.47 2.596/66.00Jaw Stroke Diameter (in/mm) .312/7.90 .312/7.90 .312/7.90 .312/7.90 .312/7.90 .312/7.90 .312/7.92 .312/7.92 .312/7.92Plunger Stroke (in/mm) .565/14.30 .565/14.30 .565/14.30 .565/14.30 .565/14.30 .565/14.30 .565/14.30 .565/14.30 .565/14.30Maximum Draw Bar Pull (lb/N) 7,000/31,000 7,000/31,000 7,000/31,000 6,500/29,000 7,000/31,000 7,000/31,000 7,000/31,000 7,000/31,000 7,000/31,000Maximum Gripping Force (lb/N) 19,000/84,500 19,000/84,500 19,000/84,500 17,500/78,000 19,000/84,500 19,000/84,500 19,000/84,500 19,000/84,500 19,000/84,500Maximum RPM 5,500 5,000 5,500 5,500 5,500 5,500 5,500 5,000 5,000Approximate Weight (lb/kg) 48.00/21.70 54.00/24.40 48.00/21.70 48.00/21.70 48.00/21.70 48.00/21.70 48.00/21.70 54.00/24.40 54.00/24.40Moment of Inertia (lb-ft-sec2/kg-m2) .101/.137 .120/.150 .101/.137 .101/.137 .101/.137 .101/.137 .101/.137 .120/.150 .120/.150Max Rec. Chucking Dia (in/mm) 7.250/184.00 8.000/203.00 7.250/184.00 7.250/184.00 7.250/184.00 7.250/184.00 7.250/184.00 8.000/203.00 8.000/203.00Accuracy—TIR (in/mm) .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127Repeatability (in/mm) .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127Dynamic Balance G - 6.3 G - 6.3 G - 6.3 G - 6.3 G - 6.3 G - 6.3 G - 6.3 G - 6.3 G - 6.3Optional Balance G - 2.5 G - 2.5 G - 2.5 G - 2.5 G - 2.5 G - 2.5 G - 2.5 G - 2.5 G - 2.5Top Jaw Model Number 8MQP1 8MQP2 8MQP1 8MQP1 8MQP1 8MQP1 8MQP1 8MQP2 8MQP2Top Jaw Part Number SC-2000721 SC-2000727 SC-2000721 SC-2000721 SC-2000721 SC-2000721 SC-2000721 SC-2000727 SC-2000727
8" QUICK-CHANGE CHUCK DIMENSIONS (in/mm) Spindle Nose A2-6 A2-6 A2-6 A2-5 to A2-6 A2-6 A2-6 A2-6 A2-6B (Bolt Thread) 1⁄2 x 13/M12 x 1.75 1⁄2 x 13/M12 x 1.75 1⁄2 x 13/M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 M12 x 1.75 1⁄2 x 13/M12 x 1.75 1⁄2 x 13/M12 x 1.75D (Diameter) 8.250/210.00 8.960/227.50 8.250/210.00 8.250/210.00 8.250/210.00 8.250/210.00 8.250/210.00 8.960/227.50 8.960/227.50H (Thru-Hole) 2.188/55.57 2.696/68.48 2.047/51.99 1.668/42.00 2.050/52.00 2.050/52.00 — 2.696/68.47 2.596/66.00K 1.000/25.40 1.194/30.32 — — — — — .840/21.34 —L (Length) 4.115/104.50 4.120/104.65 4.115/104.50 4.115/104.50 4.115/104.50 4.115/104.50 4.115/104.50 4.120/104.65 4.120/104.65L1 Minimum .625/15.87 .710/18.03 .625/15.87 4.591/116.60 5.252/133.40 5.252/133.40 5.000/127.00 — 5.762/146.00L1 Maximum 1.179/30.00 1.263/32.08 1.179/30.00 5.156/130.96 5.817/147.75 5.817/147.75 5.565/141.35 — 6.339/161.00T (Thread) — — M60 x 2.0mm 1.87 x 1.75mm M60 x 1.5mm M60 x 1.5mm M20 x 2.5mm M74 x 2mm M73 x 1.5mmW 1.500/38.00 1.500/38.00 1.500/38.00 1.500/38.00 1.500/38.00 1.500/38.00 1.500/38.00 1.500/38.00 1.500/38.00X-Start (External Gripping) 2.462/62.53 2.725/69.21 2.462/62.53 2.337/59.35 2.337/59.35 2.337/59.35 2.337/59.35 2.725/69.21 2.725/69.21See page 21 for corresponding Quick-Change Sure-Grip Top Jaw specifications.
Chucks for other Hardinge CNC Lathes:
Chuck for Other Brands of CNC Lathes:
Chuck for HARDINGE-EMAG VL5:
8"Quick-ChangePowerChucks forallHorizontal&VerticalCNCLathes
Ref.
Chuck for Hardinge SV 200, GS 200, Talent 8/52 Lathes:
1.407
T
L
D
1
L
GS 200/66, Talent 8/66 Lathes: SR 200 Lathes:
Ref.
A2-6 Spindle A2-5 Spindle
SpecialWrench
Ref.
16
Ref.
Chuck for Hardinge GS 250, Talent, SR 250 and Other Brands of CNC Lathes:Chuck for Hardinge Vertical CNC Lathes :
Chuck for other Hardinge Horizontal CNC Lathes:
See page 21 for corresponding Quick-Change
Sure-Grip Top Jaw
specifications.
Hardinge RS 51, QUEST®& ELITE® 8/51, Hardinge Hardinge® Other Brands COBRA® 51, COBRA 65, Hardinge Hardinge Hardinge RS 65,10" QUICK-CHANGE CHUCK Other Brands GS 250, Talent® of Large Bore CONQUEST® T51, CONQUEST T65, CONQUEST VT100 CONQUEST VT200 QUEST 10/65 HardingeSPECIFICATIONS of CNC Lathes 10/78 CNC Lathes CNC Lathes T42 Big-Bore T51 Big-Bore Vertical Lathe Vertical Lathe A2-6 25C SR 250Spindle Nose A2-8 A2-8 A2-8 A2-6 to A2-8 A2-8 A2-8 A2-11 to A2-8 A2-6 A2-8Item Size (in/mm) 10/250 10/250 10/250 10/250 10/250 10/250 10/250 10/250 10/250Model Number CM2-310B-8Q TM2-310B-8Q CM2-310C-8Q HM-310-6Q HM-310-8Q HVM-310-8Q HVM-310-11Q HMQ-310-6Q HM-310-SRQPart Number SCA-2270310-A28C SC-2270310-A28T SCA-2370310-A28C SCA-2070310-A26H SCA-2070310-A28H SCA-2070310-A28V SCA-2070310-A11V SCA-2070310-A26Q SC-2370310-A8SRBlank Link Part Number SC-0000489 — SC-0000553 — — — — — —Spindle Adapter Part Number — — — SC-0000181 — — SC-0000152 — —Serrations 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60°Thru-Hole (in/mm) 3.075/78.10 3.075/78.10 3.616/91.84 2.050/52.07 2.595/65.91 1.500/38.00 1.500/38.00 2.595/65.91 3.616/91.84Jaw Stroke Diameter (in/mm) .374/9.49 .374/9.49 .374/9.49 .400/10.16 .400/10.16 .400/10.10 .400/10.16 .400/10.16 .374/9.49Plunger Stroke (in/mm) .800/20.32 .800/20.32 .800/20.32 .858/21.79 .858/21.79 .858/21.80 .858/21.80 .858/21.80 .800/20.32Maximum Draw Bar Pull (lb/N) 11,000/48,930 11,000/48,930 11,000/48,930 11,000/48,930 11,000/48,930 11,000/48,930 11,000/48,930 11,000/48,930 11,000/48,930Maximum Gripping Force (lb/N) 31,500/140,110 31,500/140,110 31,500/140,110 31,500/140,110 31,500/140,110 31,500/140,110 31,500/140,110 31,500/140,110 31,500/140,110Maximum RPM 4,500 4,500 4,200 4,500 4,500 4,500 4,500 4,500 4,200Approximate Weight (lb/kg) 78.00/35.40 78.00/35.40 89.00/40.50 75.00/34.00 78.00/35.40 78.00/35.40 78.00/35.40 75.00/34.00 89.00/40.50Moment of Inertia (lb-ft-sec2/kg-m2) .223/.303 .223/.303 .250/.330 .225/.304 .225/.304 .225/.304 .225/.304 .225/.304 .250/.330Max. Rec. Chucking Dia (in/mm) 9.000/228.00 9.000/228.00 9.500/241.00 9.000/228.00 9.000/228.00 9.000/228.00 9.000/228.00 9.000/228.00 9.500/241.00Accuracy—TIR (in/mm) .0008/.0203 .0008/.0203 .0008/.0203 .0008/.0203 .0008/.0203 .0008/.0203 .0008/.0203 .0008/.0203 .0008/.0203Repeatability (in/mm) .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127 .0005/.0127Dynamic Balance G - 6.3 G - 6.3 G - 6.3 G - 6.3 G - 6.3 G - 6.3 G - 6.3 G - 6.3 G - 6.3Optional Balance G - 2.5 G - 2.5 G - 2.5 G - 2.5 G - 2.5 G - 2.5 G - 2.5 G - 2.5 G - 2.5Top Jaw Model Number 10MQP1 10MQP1 10MQP2 10MQP1 10MQP1 10MQP1 10MQP1 10MPQ1 10MQP2Top Jaw Part Number SC-2000701 SC-2000701 SC-2000706 SC-2000701 SC-2000701 SC-2000701 SC-2000701 SC-2000701 SC-2000706
10" QUICK-CHANGE CHUCK DIMENSIONS (in/mm)Spindle Nose A2-8 A2-8 A2-8 A2-6 to A2-8 A2-8 A2-8 A2-11 A2-6 B (Bolt Thread) 5⁄8 x 11/M16 x 2 5⁄8 x 11/M16 x 2 5⁄8 x 11/M16 x 2 5⁄8 x 11/M16 x 2 5⁄8 x 11/M16 x 2 M16 x 2 M16 x 2 5⁄8 x 11/M16 x 2 5⁄8 x 11/M16 x 2D (Diameter) 10/254 10/254 10.5/266 10/254 10/254 10/250 10/250 10/254 10.5/266H (Thru-Hole) 3.075/78.10 3.075/78.10 3.616/91.84 2.050/52.07 2.595/65.91 1.500/38.00 1.500/38.00 2.595/65.91 3.616/91.84K .960/24.38 .960/24.38 1.000/25.40 — — — — — 1.000/25.40L (Length) 5.025/127.63 5.025/127.63 5.025/127.63 5.025/127.63 5.025/127.63 5.025/127.60 5.025/127.60 5.025/127.63 5.025/127.63L1 Minimum .690/17.52 .690/17.52 .740/18.79 6.810/172.97 6.810/172.97 2.210/56.10 4.080/103.60 6.810/172.97 —L1 Maximum 1.490/37.84 1.490/37.84 1.520/38.60 7.660/194.56 7.660/194.56 3.050/77.40 4.920/124.90 7.660/194.56 —T (Thread) — — — M60 x 1.5mm M73 x 1.5mm M50 x 1.5mm M50 x 1.5mm M60 x 1.5mm M87 x mm2W 1.750/44.45 1.750/44.45 1.750/44.45 1.750/44.45 1.750/44.45 1.750/44.40 1.750/44.40 1.750/44.45 1.750/44.45X Start (External Gripping) 2.878/73.10 2.878/73.10 3.440/87.37 2.871/72.92 2.871/72.92 2.871/72.92 2.871/72.92 2.871/72.92 3.440/87.37
10"Quick-ChangePowerChucks forallHorizontal&VerticalCNCLathes
17
Ref.
L
D H
K
LRef.
1
Chucks for Hardinge Horizontal CNC Lathes: Chucks for Hardinge Vertical CNC Lathes:
See page 21 for corresponding Quick-Change
Sure-Grip Top Jaw
specifications.
Chucks for Other Brands of CNC Lathes:
Hardinge® COBRA® 65, Hardinge Hardinge12" QUICK-CHANGE CHUCK Other Brands CONQUEST® T65, CONQUEST VT100 CONQUEST VT200SPECIFICATIONS of CNC Lathes and T51 Big-Bore Vertical Lathe Vertical LatheSpindle Nose A2-8 A2-8 A2-8 A2-11 to A2-8Item Size (in/mm) 12/300 12/300 12/300 12/300Model Number CM2-312C-8Q HM-312C-8Q HVM-312C-8Q HVM-312C-11QPart Number SC-2370312-A28C SC-2370312-A28H SC-2370312-A28V SC-2370312-A11VSpindle Adapter Part Number — — — SC-0000152Blank Link Part Number SC-0000419 — — —Serrations 1.5mm x 60° 1.5mm x 60° 1.5mm x 60° 1.5mm x 60°Thru-Hole (in/mm) 3.800/96.52 2.595/66.00 1.500/38.00 1.500/38.00Jaw Stroke Diameter (in/mm) .420/10.66 .420/10.66 .420/10.66 .420/10.66Plunger Stroke (in/mm) .895/22.70 .895/22.70 .895/22.70 .895/22.70Maximum Draw Bar Pull (lb/N) 12,000/53,000 12,000/53,000 12,000/53,000 12,000/53,000Maximum Gripping Force (lb/N) 32,000/142,000 32,000/142,000 32,000/142,000 32,000/142,000Maximum RPM 3,500 3,500 3,500 3,500Approximate Weight (lb/kg) 127.00/57.60 127.00/57.60 127.00/57.60 127.00/57.60Moment of Inertia (lb-ft-sec2/kg-m2) .470/.640 .470/.640 .470/.640 .470/.640Max. Rec. Chucking Diameter (in/mm) 11.000/279.40 11.000/279.40 11.000/279.40 11.000/279.40Accuracy—TIR (in/mm) .0010/.0254 .0010/.0254 .0010/.0254 .0010/.0254Repeatability (in/mm) .0008/.0200 .0008/.0200 .0008/.0200 .0008/.0200Top Jaw Model Number 12MQP1 12MQP1 12MQP1 12MQP1Top Jaw Part Number SC-2000761 SC-2000761 SC-2000761 SC-2000761
12" QUICK-CHANGE CHUCK DIMENSIONS (in/mm) Spindle Nose A2-8 A2-8 A2-8 A2-11 to A2-8B (Bolt Thread) 5/8 x 11/M16 x 2 M16 x 2 M16 x 2 M16 x 2D (Diameter) 12/300 12/300 12/300 12/300H (Thru-Hole) 3.800/96.52 2.595/66.00 1.500/38.00 1.500/38.00K .960/24.40 — — —L (Length) 5.440/138.00 5.440/138.00 5.440/138.00 5.440/138.00L1 Minimum .780/19.80 5.510/140.00 2.394/60.80 4.011/101.80L1 Maximum 1.670/42.40 6.400/162.00 3.289/83.54 4.906/124.60T (Thread) — M73 x 1.5 M50 x 1.5 M50 x 1.5W 2.000/50.80 2.000/50.80 2.000/50.80 2.000/50.80X Start (External Gripping) 3.393/86.18 3.393/86.18 3.393/86.18 3.393/86.18
12"Quick-ChangePowerChucks forallHorizontal&VerticalCNCLathes
18
G
W
H
B
SSL
Made with 1018 Cold-Rolled Steel (can be carborized and hardened by customer)SPECIFICATIONS (inches—unless specified otherwise) Chuck Size Model Part W H L G S B Weight (lb) Number Number (Width) (Height) (Length) (Groove) (Spacing) (Bolt) Set of 3 4" 4MSHF* SC-2000225S 1.00 1.12 1.95 .394 .551 8mm 1.50 4MMHF* SC-2000226S 1.00 1.50 1.95 .394 .551 8mm 2.10 4MSHP SC-2000222S 1.00 1.12 2.22 .394 .551 8mm 1.44 4MMHP SC-2000227S 1.00 1.50 2.22 .394 .551 8mm 1.50 4MH1 SC-2000224S 1.00 1.12 2.06 .394 .551 8mm 1.50 5" 5MSHF* SC-2000070S 1.00 1.12 2.40 .395 .709 8mm 1.50 5MMHF* SC-2000071S 1.00 1.49 2.48 .395 .709 8mm 2.70 5MSHP SC-2000066S 1.00 1.12 2.77 .395 .709 8mm 1.92 5MMHP SC-2000073S 1.00 1.50 2.77 .395 .709 8mm 3.00 5MH1 SC-2000072S 1.00 1.22 2.42 .395 .708 8mm 1.50 6" 6MSHF* SC-2000019S 1.25 1.25 2.75 .473 .787 10mm 3.00 6MMHF* SC-2000020S 1.25 1.75 2.75 .473 .787 10mm 4.20 6MSHP SC-2000016S 1.25 1.25 3.09 .473 .787 10mm 2.94 6MMHP SC-2000023S 1.25 1.75 3.09 .473 .787 10mm 1.30 6MH1 SC-2000021S 1.25 1.42 2.83 .473 .787 10mm 2.25 8" 8MSHF* SC-2000119S 1.50 1.50 3.36 .551 .984 12mm 5.25 8MMHF* SC-2000120S 1.50 2.00 3.36 .551 .984 12mm 7.20 8MSHP SC-2000603S 1.50 1.493 4.062 .551 .984 12mm 5.40 8MSHPL SC-2000603S 1.50 1.483 4.062 551 .984 12mm 6.00 8MMHP SC-2000123S 1.50 2.00 3.76 .551 .984 12mm 7.50 8MH1 SC-2000121S 1.50 1.75 2.64 .551 .810 12mm 3.75 10" 10MSHF* SC-2000169S 1.75 1.75 4.00 .631 1.187 12mm 9.00 10MMHF* SC-2000170S 1.75 2.25 4.00 .631 1.187 12mm 11.40 10MSHP SC-2000166S 1.75 1.75 4.56 .631 1.187 12mm 9.30 10MHP SC-2000599S 1.75 2.63 4.56 .631 1.187 12mm 14.00 10MMHP SC-2000173S 1.75 2.25 4.56 .631 1.187 12mm 12.00 10MH1 SC-2000171S 1.75 2.02 4.32 .631 1.187 12mm 6.45 12" 12MSHF* SC-2000426S 2.00 1.972 4.500 .828 1.181 16mm 12.00 12MMHF* SC-2000427S 2.00 2.750 4.500 .828 1.181 16mm 17.40 12MSHP SC-2000416S 2.00 1.972 5.043 .828 1.181 16mm 13.05 12MMHP SC-2000423S 2.00 1.972 5.043 .828 1.181 16mm 18.00 12MH1 SC-2000421S 2.00 2.180 4.927 .828 1.181 16mm 9.00
Flat Nose:
PointedNose:
Made with 6061 T-6 Condition AluminumSPECIFICATIONS (inches—unless specified otherwise) Chuck Size Model Part W H L G S B Weight (lb) Number Number (Width) (Height) (Length) (Groove) (Spacing) (Bolt) Set of 3 5" HAR5MSHA SC-2001163A 1.00 1.25 2.770 .395 .709 8mm 1.00 6" HAR6MSHA SC-2001171A 1.25 1.50 3.090 .474 .787 10mm 1.70 8" HAR8MSHA SC-2001178A 1.50 2.00 3.760 .551 .985 12mm 3.30 10" HAR10MSHA SC-2001188A 1.75 2.00 4.569 .630 1.181 12mm 4.70
Aluminum Jaws – 1.5mm x 60° – Fine Metric Serrations
Bottom clearedfor stop plate
4MH1, 5MH1, 6MH1, 8MH1, 10MH1 & 12MH1models are hardenedsingle-step jaws:
G
W
H
1/8" Flat
30
BS
L
Note: See Style "Q" for corresponding Pie Jaws® *Flat nose
Steel Jaws – 1.5mm x 60° – Fine Metric Serrations
Made with 1018 Cold-Rolled Steel (can be carborized and hardened by customer)SPECIFICATIONS (inches—unless specified otherwise) Chuck Size Model Part W H L G S B Flat Number Number (Width) (Height) (Length) (Groove) (Spacing) (Bolt) (Width) 6" HKT6-125 SC-2000001SK6 1.25 1.25 3.00 .474 .787 .69 .1301 HKT6-200 SC-2000002SK6 1.25 2.00 3.00 ,474 ,787 .69 .130 8" HKT8-150 SC-2000003SK8 1.50 1.50 3.75 .551 .985 .78 .125 HKT8-300 SC-2000004SK8 1.50 3.00 3.75 .551 .985 .78 .125 10" HKT10-200 SC-2000005SK10 1.75 2.00 4.50 .630 1.181 .78 .130 HKT10-300 SC-2000006SK10 1.75 3.00 4.50 .630 1.181 .78 .130
Jaws are compatible with Hardinge, Kitagawa, Logansport Matsumoto and Howa Chucks.
W
G
LS
H
30
Flat
Steel Jaws – 1.5mm x 60° – Fine Metric Serrations
Jaws–StyleP Aluminum,SteelandSoft
19
G
W
H
B
SSL
G
W
H
B
SSL
�
Made with 1018 Cold-Rolled Steel (can be carborized and hardened by customer)
SPECIFICATIONS (inches unless specified otherwise) Chuck Size Model Part W H L G S B Weight (lb) Number Number (Width) (Height) (Length) (Groove) (Spacing) (Bolt) Set of 3 4ESHF 2* SC-1000217S 1.00 1.12 2.09 .434 .709 .3125 1.50 4EMHF 2* SC-1000218S 1.00 1.50 2.09 .434 .709 .3125 2.10 4" 4ESHP 2 SC-1000211S 1.00 1.12 2.37 .434 .709 .3125 1.44 4EMHP 2 SC-1000220S 1.00 1.50 2.38 .434 .709 .3125 1.50 4EH1 SC-1000219S 1.00 1.12 2.38 .434 .660 .3125 1.50 5ESHF 2* SC-1000077S 1.00 1.12 2.48 .434 .709 .3125 1.50 5EMHF 2* SC-1000078S 1.00 1.50 2.48 .434 .709 .3125 2.70 5" 5ESHP 2 SC-1000061S 1.00 1.12 2.77 .434 .709 .3125 1.92 5EMHP 2 SC-1000081S 1.00 1.50 2.77 .434 .709 .3125 3.00 5EH1 SC-1000079S 1.00 1.12 2.38 .434 .660 .3125 1.50 6ESHF 2* SC-1000026S 1.25 1.25 2.75 .551 .787 .3750 3.00 6EMHF 2* SC-1000027S 1.25 1.75 2.75 .551 .787 .3750 4.20 6" 6ESHP 2 SC-1000011S 1.25 1.25 3.09 .551 .787 .3750 2.94 6EMHP 2 SC-1000030S 1.25 1.75 3.09 .551 .787 .3750 1.30 6EH1 SC-1000028S 1.25 1.34 2.81 .551 .787 .3750 2.25 8ESHF 2* SC-1000126S 1.50 1.50 3.28 .671 .880 .4375 5.25 8EMHF 2* SC-10000127 1.50 2.00 3.28 .671 .880 .4375 7.20 8" 8ESHP 2 SC-1000111S 1.50 1.50 3.68 .671 .880 .4375 5.40 8EMHP 2 SC-1000130S 1.50 2.00 3.68 .671 .880 .4375 7.50 8EH1 SC-1000128S 1.50 1.75 2.64 .671 .810 .4375 3.75 10ESHF 2* SC-1000176S 1.75 1.75 4.16 .828 1.187 M16 x 2 9.00 10EMHF 2* SC-1000177S 1.75 2.60 4.16 .828 1.187 M16 x 2 10.80 10" 10ESHP 2 SC-1000161S 1.75 1.75 4.72 .828 1.187 M16 x 2 9.30 10EMHP 2 SC-1000180S 1.75 2.25 4.72 .828 1.187 M16 x 2 12.00 10EH1 SC-1000178S 1.75 2.02 4.32 .828 1.020 M16 x 2 6.45
2-boltPointed Jaw:
Hardinge jaws:Bottom clearedfor stop plate
4EH1, 5EH1, 6EH1,8EH1 & 10EH11
models are hardenedsingle-step jaws:
2-boltFlat Jaw:
Made with 6061 T-6 Condition AluminumSPECIFICATIONS (inches unless specified otherwise) Chuck Size Model Part W H L G S B Weight (lb) Number Number (Width) (Height) (Length) (Groove) (Spacing) (Bolt) Set of 3 4" HAR4ESHA2 SC-1000680A 1.00 1.25 2.50 .434 .709 8mm .800 5" HAR5ESHA2 SC-1000684A 1.00 1.25 2.77 .434 .709 .3125 1.000 6" HAR6ESHA2 SC-1000685A 1.25 1.50 3.09 .551 .787 .3750 1.500 8" HAR8ESHA2 SC-1000697A 1.50 2.00 3.68 .670 .880 .4375 2.700 10" HAR10ESHA2 SC-1000698A 1.75 2.00 4.72 .828 1.187 .6250 4.000
Aluminum Jaws 1⁄16" x 90° Serrations
Steel Jaws 1⁄16" x 90° Serrations
2 2-bolt Note: See Style "K" for corresponding Pie Jaws®
2 2-bolt*Flat-nose
Jaws–StyleJ AluminumandSteel
G
W
H
B
SSL
Note: See Style "K" for corresponding Pie Jaws®
See page 22 – T-nuts for 1⁄16" x 90° serrated top jaws
20
GD
H
1/4" Gap
B
60 x 1.5mmSerrations
S
N
SPECIFICATIONS (inches unless specified otherwise) Chuck Size Model Part D H G S B N Weight (lb) Number Number (Diameter) (Height) (Groove) (Spacing) (Bolt) Set of 3 5" HAR5MSHP SC-2001379A 6.00 2.00 .395 .709 8mm 1.687 7.50 HAR5MSHP1 SC-2001380A 6.00 4.00 .395 .709 8mm 1.687 10.00 6" HAR6MSHP SC-2001388A 6.50 2.00 .474 .787 10mm 1.937 9.00 HAR6MSHP1 SC-2001389A 6.50 4.00 .474 .787 10mm 1.937 11.50 8" HARMSHP SC-2001399A 8.00 2.00 .551 .985 12mm 2.265 9.50 HAR8MSP1 SC-2001400A 8.00 4.00 .551 .985 12mm 2.265 19.00 10" HAR10MSHP SC-2001413A 10.00 2.00 .630 1.181 12mm 2.750 15.00 HAR10MSHP1 SC-2001414A 10.00 4.00 .630 1.181 12mm 2.750 30.00 12" KTT-B212-P-A 3 SC-2001424A 12.00 2.50 .828 1.181 16mm 2.687 28.00 KTTB212-P-1-A 3 SC-2001425A 12.00 5.00 .828 1.181 16mm 2.687 51.00
Note: See Style "P" for corresponding straight aluminum or steel jaws. When using oversized jaws, maximum RPM must be reduced - consult
your chuck manual. 3 3 holes in jaw – Do not overhang Pie Jaw OD past chuck OD
Aluminum Pie Jaws – Style Q1.5mm x 60° Fine Metric Serrations
Hardinge K- and Q-style
Pie Jaws are made from
A319 cast aluminum to allow
fast machining at high rpm.
Steel and cast iron jaws
are also available.
SPECIFICATIONS (inches unless specified otherwise) Chuck Size Model Part D H G S B N Weight (lb) Number Number (Diameter) (Height) (Groove) (Spacing) (Bolt) Set of 3 5" HAR5ESHP 2 SC-1000761A 6.00 2.00 .434 .709 .3125 1.703 7.50 HAR5ESHP1 2 SC-1000762A 6.00 4.00 .434 .709 .3125 1.703 10.00 6" HAR6ESHP 2 SC-1000766A 6.50 2.00 .551 .787 .3750 1.968 9.00 HAR6ESHP1 2 SC-1000767A 6.50 4.00 .551 .787 .3750 1.968 11.50 HAR8ESHP 2 SC-1000772A 8.00 2.00 .670 .880 .4375 2.296 9.50 8" & 10" HAR8SHP1 2 SC-1000773A 8.00 4.00 .670 .880 .4375 2.296 19.00 HAR10ESHP 2 SC-1000774A 10.00 2.00 .828 1.187 16mm 2.750 15.00 HAR10ESHP1 2 SC-1000775A 10.00 4.00 .828 1.187 16mm 2.750 30.00
GD
H
S
N
1/4" Gap
90 x 1/16"Serrations
B
Note: See Style "J" for corresponding straight aluminum or steel jaws.
When using oversized jaws, maximum RPM must be reduced - consult your chuck manual.
2 2-bolt
Aluminum Pie Jaws – Style K 1⁄16" x 90° Serrations
PieJaws–StylesK&Q Aluminum
21
Made with 1018 Cold-Rolled Steel (can be carborized and hardened by customer)QUICK-CHANGE TOP JAW SPECIFICATIONS (inches unless specified otherwise) Chuck Size Chuck Spindle Top Jaw Top Jaw Length Width Height Serrations C Thread Weight (lb) Model Number Nose Model No. Part Number Set of 3 CM2-306C-5Q A2-5 6MQP2 SC-2000747S 3.15 1.25 1.46 1.5mm x 60° 1.22 M10 x 1.50 3.36 6" HM-306-Q A2-5 6MQP1 SC-2000741S 3.03 1.25 1.46 1.5mm x 60° 1.22 M10 x 1.50 3.36 HM-306-6Q A2-6 6MQP3 SC-2000746S 3.05 1.25 1.46 1.5mm x 60° 1.22 M10 x 1.50 3.36 HM-306-6LQ A2-6 6MQP3 SC-2000746S 3.05 1.25 1.46 1.5mm x 60° 1.22 M10 x 1.50 3.36 HM-308-5Q A2-5 8MQP1 SC-2000721S 3.76 1.50 1.63 1.5mm x 60° 1.68 M10 x 1.50 5.52 8" CM2-308C-6Q A2-6 8MQP2 SC-2000727S 3.76 1.50 1.63 1.5mm x 60° 1.68 M10 x 1.50 5.52 CM2-308B-6Q A2-6 8MQP1 SC-2000721S 3.76 1.50 1.63 1.5mm x 60° 1.68 M10 x 1.50 5.52 HM-308-Q A2-6 8MQP1 SC-2000721S 3.76 1.50 1.63 1.5mm x 60° 1.68 M10 x 1.50 5.52 HM-310-6Q A2-6 10MQP1 SC-2000701S 4.58 1.75 1.72 1.5mm x 60° 2.05 M12 x 1.75 9.48 CM2-310B-8Q A2-8 10MQP1 SC-2000701S 4.58 1.75 1.72 1.5mm x 60° 2.05 M12 x 1.75 9.48 CM2-310C-8Q A2-8 10MQP2 SC-2000706S 4.87 1.75 1.72 1.5mm x 60° 2.05 M12 x 1.75 9.75 10" HM-310-8Q A2-8 10MQP1 SC-2000701S 4.58 1.75 1.72 1.5mm x 60° 2.05 M12 x 1.75 9.48 HVM-310-8Q A2-8 10MQP1 SC-2000701S 4.58 1.75 1.72 1.5mm x 60° 2.05 M12 x 1.75 9.48 HVM-310-11Q A2-11 10MQP1 SC-2000701S 4.58 1.75 1.72 1.5mm x 60° 2.05 M12 x 1.75 9.48 CM2-312C-8Q A2-8 12MQP1 SC-2000761S 5.42 2.00 1.96 1.5mm x 60° 2.55 M16 x 2.00 13.5 12" HM-312C-8Q A2-8 12MQP1 SC-2000761S 5.42 2.00 1.96 1.5mm x 60° 2.55 M16 x 2.00 13.5 HVM-312C-8Q A2-8 12MQP1 SC-2000761S 5.42 2.00 1.96 1.5mm x 60° 2.55 M16 x 2.00 13.5 HVM-312C-11Q A2-11 12MQP1 SC-2000761S 5.42 2.00 1.96 1.5mm x 60° 2.55 M16 x 2.00 13.5Note: See pages 13-17 for corresponding Hardinge Quick-Change Sure-Grip Chucks
Quick-Change Conversion Kits for standard Sure-Grip® Power ChucksConvert your standard Hardinge Sure-Grip power chuck into a quick-change style chuck for faster jaw changeover. Kit includes conversion kit with top jaws.
KIT CONFIGURATIONS Chuck Size Sure-Grip Chuck Spindle Top Jaw Conversion Kit Model Number Nose Model No. Assembly No. CM2-306C-5 A2-5 6MQP2 SC-2000747QC 6" HM-306 A2-5 6MQP1 SC-2000741QC HM-306-6 A2-6 6MQP3 SC-2000746QC HM-306-6L A2-6 6MQP3 SC-2000746QC HM-308-5 A2-5 8MQP1 SC-2000721QC 8" CM2-308B-6 A2-6 8MQP1 SC-2000721QC CM2-308C-6 A2-6 8MQP2 SC-2000727QC HM-308 A2-6 8MQP1 SC-2000721QC HM-310-6 A2-6 10MQP1 SC-2000701QC CM2-310B-8 A2-8 10MQP1 SC-2000701QC 10" CM2-310C-8 A2-8 10MQP2 SC-2000706QC HM-310-8 A2-8 10MQP1 SC-2000701QC HVM-310-8 A2-8 10MQP1 SC-2000701QC HVM-310-11 A2-11 10MQP1 SC-2000701QC HCM-312C-8 A2-8 12MQP1 SC-2000761QC 12" HM-312C-8 A2-8 12MQP1 SC-2000761QC HVM312C-8 A2-8 12MQP1 SC-2000761QC HVM-312C-11 A2-11 12MQP1 SC-2000761QCNote: See pages 6-12 for corresponding Hardinge Sure-Grip Chucks
Quick-Change Steel Jaws – 1.5mm x 60°Fine Metric Serrations
L
Quick-Change Sure-Grip® Jaws
22
Hardinge® is your source for replacement Jaws for all brands of chucks manufactured worldwide. •SteelandaluminumjawsforAmericanStandardtongueandgroove•Metrictongueandgroove•Woodworthdovetailtongueandgroove•AmericanStandardsquareserratedkey•Acmeserratedcrosskey•1⁄16" x 90° serrated•1⁄32" x 90° serrated•1.5mmx60°serrated•3.0mmx60°serrated•PieJaws®– aluminum and steel•Masterplatesandsegmentsfrom10"to60"diameters
SPECIFICATIONS (inches unless specified otherwise) Chuck Size Spindle Part L H W K E S B Nose Number (Length) (Height) (Width) (Spacing) (Bolt) 4" – Soft Jaw A2-4 SC-0000098 1.245 .650 .553 .432 .219 .660 5⁄16" x 18 4" – Hard Jaw A2-4 SC-0000099 1.249 .650 .553 .432 .219 .709 5⁄16" x 18 5" – Soft Jaw A2-5 SC-0000098 1.245 .650 .553 .432 .219 .660 5⁄16" x 18 5" – Hard Jaw A2-5 SC-0000099 1.249 .650 .553 .432 .219 .709 5⁄16" x 18 6" – Soft Jaw A2-5 SC-0000048 1.430 .695 .600 .548 .250 .709 3⁄8" x 16 6" – Hard Jaw A2-5 SC-0000049 1.508 .695 .600 .548 .250 .787 3⁄8" x 16 8" – Soft or Hard Jaw A2-6 SC-0000112 .725 .769 .830 .667 .313 N/A 7⁄16" x 14 (*two parts required) SC-0000101 .620 .769 .830 .667 .313 N/A 7⁄16" x 14 10" – Soft Jaw A2-6, A2-8,A2-11 SC-0000162 1.134 .953 1.110 .825 .406 N/A M16 - 2 (*two parts required) SC-0000151 1.257 .953 1.110 .825 .406 N/A M16 - 2 10" – Hard Jaw A2-6, A2-8,A2-11 SC-0000193 2.196 .953 1.110 .825 .405 1.020 M16 - 2Note: * Split, two-piece style – both parts must be ordered
SPECIFICATIONS (inches unless specified otherwise) Chuck Size Spindle Part L H W K E S B Nose Number (Length) (Height) (Width) (Spacing) (Bolt) 4" A2-4 SC-0000223 1.136 .705 .553 .393 .219 .551 M8 x 1.25 5" A2-5 SC-0000065 .620 .705 .553 .393 .219 N/A M8 x 1.25 (*two parts required) SC-0000067 .595 .705 .553 .393 .219 N/A M8 x 1.25 6" A2-5 SC-0000015 1.570 .719 .646 .470 .250 .787 M10 x 1.50 6" A2-6 SC-0000500 1.507 .719 .646 .470 .250 .787 M10 x 1.50 8" A2-5 & A2-6 SC-0000115 .650 .976 .750 .548 .313 N/A M12 x 1.75 (*two parts required) SC-0000131 .700 .796 .750 .548 .313 N/A M12 x 1.75 10" A2-6, A2-8,A2-11 SC-0000165 2.227 .976 .923 .631 .390 1.187 M12 x 1.75 12" A2-8 & A2-11 SC-0000412 2.470 1.047 1.170 .825 .443 1.181 M16 x 2.00
Bolt SizeK
W
LSH
E
I-BEAM ASSEMBLIESfor Hardinge Quick-Change
Chuck Jaws
Chuck Size Part Number6" (A2-5) SC-0000740QC
6.5" (A2-6) SC-0000745QC 8" SC-0000720QC 10" SC-0000700QC 10.5" SC-0000700QC 12" SC-0000760QC
Jaw Nuts (T-Nuts) & I-Beam Assemblies for 1.5mm x 60° Serrated Jaws
Jaw Nuts (T-Nuts) for 1⁄16" x 90° Serrated Jaws
ReplacementJawNuts
JawsforAllChuckBrands
23
Collets offer longer life and improved accuracy…
•Ahardenedandgroundcollethasamuchlonger life and maintains a more critical part tolerance than machined chuck jaws do, making it more appropriate for long run jobs. Jaws have to be re-bored over long runs, creating substantial downtime.
•HardingeColletAdaptationChucksprovideaprecision bearing surface for better accuracy than can be achieved with jaw chucks.
•Colletsareavailableinspecialaccuracyforsuper precision work that you would not be able to perform with a chuck.
•TheuseofColletChucksofferlesschanceforexpensive wrecks. Have you ever had to replace a turret assembly or a spindle or had to have your jaw chuck rebuilt? Those costly repairs can often be a result of top jaw interference.
•HardingeColletChucksimproveaccuracyandproductivity where and when you need it!
Request brochure 2352 for additional information.
Hardinge HCAC™ Collet Adaptation Chucks convert a chuck-style spindle into a collet-style spindle to accommodate higher precision work. You may be able to finish a part in one setup, thus eliminating a secondary operation and reducing turnaround time. Collet Adaptation Chucks can increase both your productivity and job flexibility. While chucks are perfect for large, non-symmetrical or variable-diameter work-pieces, there are advantages to using collets in other situations.
5C Draw Collet Adaptation Chuck
16C Draw Collet Adaptation Chuck with
A2-5 or A2-6 Spindle Nose
S26 Master Draw Collet Adaptation Chuck
Manual Scroll-Style Collet Adaptation Chuck
B42 Stationary ColletAdaptation Chuck
Dead-Length® Draw Collet Adaptation Chuck
ColletChucksforprecisioncolletworkonachuck-stylelathe
24
SpindleToolingforManual&CNCLathes
SpindleToolingforAutomatics,TurretLathes&RotaryTransferMachines
Swiss-TypeCollets,GuideBushings&BarloaderCollets
hQC® Quick-ChangeColletSystems
Sure-Grip® ExpandingColletSystems
hCAC® ColletAdaptationChucks
Sure-Grip® 3-Jaw Power Chucks
Chuck Jaws
ToolholderCollets,Bushings&ToolHolders
PrecisionCNCToolingforMills
ColletBlocks
RotaryIndexingProducts
CustomWorkholding
IndustrialProducts
MachineTools
Hardinge manufactures workholding for all brands of lathes, mills, grinding
machines, automatic screw machines, rotary transfer machines, turret lathes,
automation and assembly. Expect more from your workholding. Choose
Hardinge precision and reliability for increased productivity and value!
Call us today, we’ve got your answer.
Hardinge Inc.OneHardingeDrive|P.O.Box1507|Elmira,NewYork14902-1507USAUSA:800-843-8801,or607-378-4022|Canada:800-468-5946|Fax:607-734-3886ToOrderOnline:www.hardingetooling.com|CorporateHomepage:www.hardinge.com|E-mail:[email protected]
Allspecificationssubjecttochangewithoutnotice.Allmarksindicatedby®and™aretrademarksofHardingeInc.Brochure#2357C•LithoinUSA•©HardingeInc.2008•3MApril2008