GENERAL CONTRACTORS 835 GIL HARBIN INDUSTRIAL BLVD. VALDOSTA, GA 31601 (229) 244-6709 ● Fax (229) 244-7778

TO: BES Incorporated

2712 Bull Street

Beaufort, SC 29902

P 843.522.2094

SUBMITTAL TRANSMITTAL

DATE May 20, 2010 JOB NO. 09-019

ATTENTION Mr. Robert Beach

RE Enclave Force Protection Access Control Point

Contract W9128F-09-C-0051

Ft. Gillem, Georgia

Submittal Number 32 31 13 SD-03a

Description Gate Hardware Accessories

See Form 4025 Attached

COPY TO File

SIGNED

If enclosures are not as noted, kindly notify us at once.

SUBMITTED FOR:Shop Drawings Approval Approved as Submitted

WE ARE SENDING:

Letter Your Use Approved as NotedPrints As Requested Returned After LoanChange Order Review and Comment ResubmitPlans SubmitSamples ReturnedSpecifications Returned for Corrections

Other: Made from Submittal

SENT VIA:Attached

Separate Cover Via: Mail

ü

ü

ü

ü

üDue Date:

TRANSMITTALNo. 00034

ACTION TAKEN:

TO: Slone Associates, Inc.835 Gil Harbin Industrial Blvd.

PROJECT: Ft. Gillem-Enclave Force ProtectionPROJECT NO.: 20918

Ft. Gillem, GA 30297100 Flankers Road Phone:

Fax:404-734-3340770-956-1322

DATE:

REF:

FAX:

5/20/2010

Submittals

229-244-7778229-244-6709Valdosta, GEORGIA 31601

ATTN: Santiago F. IturraldePHONE:

ITEM NO. COPIES DATE ITEM NUMBER REV. NO. DESCRIPTION STATUS

0 NEW5/20/2010 SUT 001 Dwg: Title: Gate Product Data Desc: Gateproduct data

32-31-13 SD-03a

REMARKS:

Expedition ®

CC: Signed:Andrew Hannon

I'II·

·1II

I·1

j

Cantilever Gate Roller - made with hot rolled steel chassis to prevent rust and can b... Page 1 of 1

About Us I Email Signup I Contact Us

Call.Toll-Free: (800) 888-9768

Home Gate LaIdJes cantll_ RoIIet"sGate Hinges Product catalogPanic Exit Hardware Shop Drawings

cantilever RollersAbout cantflever Rollets

SteiIlUl cantflever Rollers

Cantilever Roller

.All of DAe Industries "stealth" cantilever rollers are made with a hot rolled steel chassis. The chassis is formed,welded, and then hot dip galvanized after fabrication to prevent rust. We chose to make the chassis out ofpressed steel rather than a casting to allow you to weld it to the post if you desire. The support gussets arestrategically placed to allow easier access to the nuts for faster and easier installation and removal.

Our premium graphite impregnated nylon rollers are cast and then machined to their final shape eliminating anyrough surfaces that may cause friction. Far superior to the old metal casting type, these rollers will allow acantilever gate to glide effortlessly.

All of our rollers use permanently lUbricated sealed bearings. The bearings are not molded Into the rollers, but arepress fit. If a bearing should ever need repladng it can be easily removed and a new bearing installed. Thismaintenance feature addresses the most common cause of roller failure.

A nylon embedded steel lock nut holds the roller onto the chassis. This gives a more secure mounting than cotterpins or snap rings.

Don't be fooled by inexpensive imported rollers coming into the market Our "stealth" cantilever rollers are quality.American made and will not need to be replaced within a year or two of installation.

©2009 OAClndustries,lnc. 600 Eleventh Street, N.W. Grand Rapids, MI49504 Phone: (616) 235-0140 Toll Free: (800) 888·9768 Fax: (616) 235·2901

Login

http://dacindustries.comlcms/CantileverRollers/ AboutCantileverRollers/tabidl64IDef... 511112010

Stealth Cantilever Roller Gate made with high-tech polymer rollers that glide with e... Page 2 of 3

About Us I Email Signup I Contact Us

Call Toll-Free: (800) 888-9768

Home Gate Latches Gate Hinges cantlIevel' Rollers Panic Exit Hardware Product Catalog Shop Drawings

Cantilever RollersAbout Cantilever Rollers

Stealth cantilever ROllers

Stealth Cantilever Rollers

The evolution of the modern cantilever roller has taken place. Rugged high-tech polymer rollers that glide withease have replaced those make of antiquated metal castings. Durable and strong, the STEALTHcantilever rollersallow your gate to slide smoothly and effortlessly. STEALTHrollers have a galvanized solid steel chassis andmaintenance-free permanently sealed and lubricated bearings repladng ancient zerk fittings and messy greaseguns. Proudly made in the USA, the STEAlTH rollers wni keep your gate soaring smoothly In the future.

Features Available in sizes for

• High-Tech Polymer Rollers• Smooth• Durable and Strong• Maintenance Free• Galvanized Steel Olassis

• 2" Square pipe gate frame• 2" 0.0. frame size• 2 1/2" 0.0. frame Size• 3" - 4" - 6 5/8"• Round gate post

#5350 Premium SQUAREcantilever Roller

#5500 Standard cantilever Roller- Round

#5658, #5800, #5858 PremiumCantilever RaUer

http://dacindustries.comlcms/CantileverRollers/StealthCantileverRoller/tabid/65/Def... 511112010

i1·~800·888"97aa. ._faciQo~Iifa*,··

INDUSTRIES· .::~:. . .:61/4~;;:<';'I':~~,,":a:;

..... ,,;" .;:,,::< ': .;...., .:~"" .OF.

I I

~ :t7 i:f-> <..I

'-' t:::> C>CJ

FO'.R:' 'BARB'" 'D' 'W" "tR' : •.. ..' L : '.... '. ..,: '~', ::' '" " . I ".' ' " i

.ADD 1 ,1

,~~-~~.

.n .f)" ...., "

1 .". • 111II nr ~, . . . .

"i ';

'1' [

I ;

WI-DUAL-PlT8I

, I

• Steel Stamped Housing• Hot Dipped Galvanized• Heat TreatedU-Bolts• Solid 8" Wheels .

. . 'i.

c4@,f. F 900 - 05

5.2 Dimensions and weights of gate frame members shall bein accordance with Table 1.

5.2.1 Gate frame shall be designed for the width built so thatthe outer member shall not sag in excess of the lesser of 1 % ofthe gate leaf width or 2 in. [50.8 mm].

5.2.2 For dimensions and weight of gate posts, see Table 2.

6. Gate Accessories6.1 All gate hardware shall be of sufficient strength and

durability to support the gate and repeated open-close cycles.6.2 Gate Hinges-Hinges shall be structurally capable of

supporting the gate leaf and allow the gate to open and closewithout binding. The hinges shall be so designed to permit thegate to swing a full 180°. The user shall specify, one of thefollowing directions of swing:

6.2.1 180° outward,6.2.2 180° inward,6.2.3 90° in and out.

6.3 Single Gate Latch-This latch shall be capable ofretaining the gate in a closed position and shall have provisionfor a adlo::.:c~k~. --~.---

0.4 Double Gate Latch-This latch shall be a drop rod or2lunger bar arranged to engage the gate stop. Locking devicessnail be constructed so that the center drop rod or plunger barcannot be raised when the gate is'Iocked. The latching devicesshall have provision for a padlock.

.5 Gate Stops-Gate stops shall be provided for all doublegates and shall be suitable for setting in concrete for the centerdrop rod or plunger.

6.6 Keepers-Keepers shall be provided for each gate leafover 5 ft [1.5 m] wide. Gate keepers shall consist ofmechanical device for securing the free end of the gate when infull o2en 2osition.

7. Keywords7.1 drop rod; gate leaf; hinges; keepers; latch; plunger;

polymer; truss rods

TABLE 1 Gate Frame Members, Dimensions, and Weights

NOTE-Gate leaf shall have vertical interior bracing at maximum intervals of 8 ft and shall have a horizontal interior member if fabric height is 8 ftor more. Additional horizontal, vertical or diagonal member or diagonal truss rods may be needed to comply with requirements of 5.2.1.

Gate Fabric Height Outside Minimum Weight,Dimensions, Ib/ft [kg/mJ

in. [rnrn]

6 ft [1.8 m] or Less:Round tubular (steel) 1.66 [42.2J 1.83 [2.72JRectangular tubular (steel) 1.50 [38.1J 1.84 [2.74JRound tubular (aluminum) 1.90 [48.3J 0.91 [1.35JRectangular tubular (aluminum) 2.00 [50.8J 0.91 [1.35J

Over 6 ft [1.8 rn]:Round tubular (steel) 1.90 [48.3] 2.28 [3.39JRectangular tubular (steel) 2.00 [50.8] 2.52 [3.75JRound tubular (aluminum) 1.90 [48.3J 0.91 [1.35JRectangular tubular (aluminum) 2.00 [50.8J 0.91 [1.35]

Interior Bracing:Round pipe (steel) 1.66 [42.2] 1.83 [3.39JRectangular pipe (steel) 1.50 [38.1] 1.84 [2.74]Round tubular (aluminum) 1.90 [48.3] 0.91 [1.35JRectangular tubular (aluminum) 2.00 [50.8] 0.91 [1.35J

2

Page 1 of 1

I{

\Cl=

}

ahannon

Text Box

Sliding Gate Latch