Submission Page 1 August 2002 doc.: IEEE 802.11-02/503r0 Daryl Kaiser, Cisco Systems Radio...
-
Upload
jason-cook -
Category
Documents
-
view
219 -
download
4
Transcript of Submission Page 1 August 2002 doc.: IEEE 802.11-02/503r0 Daryl Kaiser, Cisco Systems Radio...
![Page 1: Submission Page 1 August 2002 doc.: IEEE 802.11-02/503r0 Daryl Kaiser, Cisco Systems Radio Measurement: A Candidate Approach Daryl Kaiser (Cisco Systems)](https://reader036.fdocuments.us/reader036/viewer/2022082805/5514ab7b550346b2598b5ffe/html5/thumbnails/1.jpg)
Daryl Kaiser, Cisco Systems
Submission Page 1Page 1
August 2002
doc.: IEEE 802.11-02/503r0
Radio Measurement:A Candidate Approach
Daryl Kaiser (Cisco Systems)
8 August 2002
![Page 2: Submission Page 1 August 2002 doc.: IEEE 802.11-02/503r0 Daryl Kaiser, Cisco Systems Radio Measurement: A Candidate Approach Daryl Kaiser (Cisco Systems)](https://reader036.fdocuments.us/reader036/viewer/2022082805/5514ab7b550346b2598b5ffe/html5/thumbnails/2.jpg)
Daryl Kaiser, Cisco Systems
Submission Page 2Page 2
August 2002
doc.: IEEE 802.11-02/503r0
Goal of Radio Measurement:
To characterize the radio environment for…
Initial deployment
• Enable some degree of automatic radio configuration
Network expansion
• Enable some degree of automatic radio reconfiguration
Maintenance/troubleshooting
• Provide information to monitor radio performance and fix problems
![Page 3: Submission Page 1 August 2002 doc.: IEEE 802.11-02/503r0 Daryl Kaiser, Cisco Systems Radio Measurement: A Candidate Approach Daryl Kaiser (Cisco Systems)](https://reader036.fdocuments.us/reader036/viewer/2022082805/5514ab7b550346b2598b5ffe/html5/thumbnails/3.jpg)
Daryl Kaiser, Cisco Systems
Submission Page 3Page 3
August 2002
doc.: IEEE 802.11-02/503r0
Define Radio Configuration:
A set of 802.11 parameter values, individualized for each BSS in a WLAN, that determine WLAN radio performance
Including, but not limited to:
• BSS channel
• AP transmit power
• Client transmit power limit
![Page 4: Submission Page 1 August 2002 doc.: IEEE 802.11-02/503r0 Daryl Kaiser, Cisco Systems Radio Measurement: A Candidate Approach Daryl Kaiser (Cisco Systems)](https://reader036.fdocuments.us/reader036/viewer/2022082805/5514ab7b550346b2598b5ffe/html5/thumbnails/4.jpg)
Daryl Kaiser, Cisco Systems
Submission Page 4Page 4
August 2002
doc.: IEEE 802.11-02/503r0
What will radio measurements allow us to do?
• Simplify and/or automate WLAN radio configuration
• Achieve better performance in dense BSS deployments
• Better utilize radio resources across client stations
• Alert WLAN administrator to problems
• Notify client station users of current radio status
• Each company uses measurements to add value
![Page 5: Submission Page 1 August 2002 doc.: IEEE 802.11-02/503r0 Daryl Kaiser, Cisco Systems Radio Measurement: A Candidate Approach Daryl Kaiser (Cisco Systems)](https://reader036.fdocuments.us/reader036/viewer/2022082805/5514ab7b550346b2598b5ffe/html5/thumbnails/5.jpg)
Daryl Kaiser, Cisco Systems
Submission Page 5Page 5
August 2002
doc.: IEEE 802.11-02/503r0
What should we measure?
• Attributes that characterize the WLAN radio environment
• Attributes that affect or reflect WLAN radio performance
• Attributes that are not manufacturer specific
• Define the simplest, smallest set of measurements required
![Page 6: Submission Page 1 August 2002 doc.: IEEE 802.11-02/503r0 Daryl Kaiser, Cisco Systems Radio Measurement: A Candidate Approach Daryl Kaiser (Cisco Systems)](https://reader036.fdocuments.us/reader036/viewer/2022082805/5514ab7b550346b2598b5ffe/html5/thumbnails/6.jpg)
Daryl Kaiser, Cisco Systems
Submission Page 6Page 6
August 2002
doc.: IEEE 802.11-02/503r0
Two Categories of Radio Measurement(and some candidate measurements)
Statistical Measurements characterize the radio environment in a long-term statistical sense. For example,
• Measure 802.11 traffic load as channel busy fraction1
• Measure non-802.11 interference as received power histogram1
Identity Measurements identify stations that affect each other’s performance. For example,
• Identify each neighbor AP by overhearing its MAC address
• Identify each neighbor STA and its serving AP in a similar manner
• Identify hidden STA when receiving downlink frames with no ACK
1: these measurements are already in 802.11h draft
![Page 7: Submission Page 1 August 2002 doc.: IEEE 802.11-02/503r0 Daryl Kaiser, Cisco Systems Radio Measurement: A Candidate Approach Daryl Kaiser (Cisco Systems)](https://reader036.fdocuments.us/reader036/viewer/2022082805/5514ab7b550346b2598b5ffe/html5/thumbnails/7.jpg)
Daryl Kaiser, Cisco Systems
Submission Page 7Page 7
August 2002
doc.: IEEE 802.11-02/503r0
What changes are needed in all stations?
Wireless MAC message protocol
• Build upon 802.11h mechanisms and measurement frames
• Add RRM capability bit and RRM action frame type
• Augment 802.11h measurements with new requests/reports
MAC firmware
• Handle new management frames in the wireless MAC protocol
• Compute measurement payloads from PHY registers and traffic
![Page 8: Submission Page 1 August 2002 doc.: IEEE 802.11-02/503r0 Daryl Kaiser, Cisco Systems Radio Measurement: A Candidate Approach Daryl Kaiser (Cisco Systems)](https://reader036.fdocuments.us/reader036/viewer/2022082805/5514ab7b550346b2598b5ffe/html5/thumbnails/8.jpg)
Daryl Kaiser, Cisco Systems
Submission Page 8Page 8
August 2002
doc.: IEEE 802.11-02/503r0
What additional changes are needed in access points?
Process measurement requests from external entity
• Translate external request into measurement action at AP radio
• Translate request into action frame and send to client stations
• Perform these actions at periodic interval, if requested
Accumulate, store and/or report measurements
• Measurements taken at the AP radio
• Measurements reported by client stations
• Method of conveyance is a separate discussion
![Page 9: Submission Page 1 August 2002 doc.: IEEE 802.11-02/503r0 Daryl Kaiser, Cisco Systems Radio Measurement: A Candidate Approach Daryl Kaiser (Cisco Systems)](https://reader036.fdocuments.us/reader036/viewer/2022082805/5514ab7b550346b2598b5ffe/html5/thumbnails/9.jpg)
Daryl Kaiser, Cisco Systems
Submission Page 9Page 9
August 2002
doc.: IEEE 802.11-02/503r0
What should not change at any station?
• Wireless MAC control frames and procedures
• Wireless MAC data frames and procedures
• Any hardware, including MAC and PHY
![Page 10: Submission Page 1 August 2002 doc.: IEEE 802.11-02/503r0 Daryl Kaiser, Cisco Systems Radio Measurement: A Candidate Approach Daryl Kaiser (Cisco Systems)](https://reader036.fdocuments.us/reader036/viewer/2022082805/5514ab7b550346b2598b5ffe/html5/thumbnails/10.jpg)
Daryl Kaiser, Cisco Systems
Submission Page 10Page 10
August 2002
doc.: IEEE 802.11-02/503r0
Define Radio Control:(regardless of whether RRM SG decides to address it)
What it is
• Ability to remotely assign parameters values to client stations
• 802.11h already does something similar via Power Constraint
• RRM could do this via parameter command action frames
What it is not
• Algorithm for radio planning, load balancing or QoS control
• Method for converting algorithm results into parameter values