StreetScape Materials - UK & Ireland...requirements of BS 7533 Part 12. It provides exceptional bond...
Transcript of StreetScape Materials - UK & Ireland...requirements of BS 7533 Part 12. It provides exceptional bond...
Materials Division emtek.co.uk
StreetScape Materials
1
NATIONWIDE TECHNICAL SUPPORT
NATIONWIDE TECHNICAL SUPPORT
We are a leading supplier of paving construction materials across Ireland. As part of our commitment to our clients we provide regular technical training and materials awareness sessions on the best mix, application and use of our high performance products. Our materials support team work throughout Ulster, Leinster, Connaught and Munster, supporting contractors, designers, local authorities and specialist paving merchants, to help ensure the optimum use of the materials on what are often premium level, time critical projects.
NI: 028 3834 8600 / ROI: 048 3834 8600PromptDelivery
ProductsEx-stock
DedicatedSupport
On-siteDemo2
SETTING THE STANDARD
SETTING THE STANDARDOur range of streetscape grouts and mortars are BS 7533 compliant and are widely used for public realm paving schemes and high quality private and commercial footpaths, driveways and patios.
Flowpoint has been in use for over 20 years in a variety of project environments including public realm, landscaping and domestic
• Open to foot traffic in 1 hour• Open to vehicular traffic in 4 hours• Rapid setting• Exceptional bond strength• Shrinkage compensated• Mixes quickly on-site with water• Initial set after 15 minutes at 20°C
FLOWPOINTRapid Set Flowable Grout
NI: 028 3834 8600 / ROI: 048 3834 8600PromptDelivery
ProductsEx-stock
DedicatedSupport
On-siteDemo 3
BEDDING & PRIMING
BEDDING & PRIMING Selecting the correct bedding concrete and primer is key. Our materials offer exceptional strength for the crucial base layer, coupled with an exceptional bond between the base layer and the underside of the paving slabs / setts. Eco-bed and pro-prime form the foundation of every project.
UltraScape Eco-Bed is a fine bedding mortar manufactured to meet and exceed the strict requirements of BS 7533. Eco-Bed can be laid from 10mm – 75mm in one pass
UltraScape Pro-Prime slurry primer is used to provide an exceptional bond between your paving element and UltraScape Eco-Bed fine bedding mortar
• Shrinkage compensated• Small contractor friendly units• Bulk silos available for larger projects• Pre-blended - just add water• Long-term durability
• User-friendly - requires only the addition of water on-site
• Quick and easy application• Part of the UltraScape mortar paving system,
which guarantees compatibility and reduces split liability
ECO-BEDFine Bedding Mortar
PRO-PRIMESlurry Primer
NI: 028 3834 8600 / ROI: 048 3834 8600PromptDelivery
ProductsEx-stock
DedicatedSupport
On-siteDemo4
JOINTING Flowpoint is our market leading rapid set grout, exceeding the requirements of BS 7533 Part 12. It provides exceptional bond strength and helps lock in the whole paving system. It is a flowable slurry grout that is shrinkage compensated and rapid setting, open to pedestrian traffic within 60 minutes.
Available in three alternatives; regular, eco and smooth, in two colours; natural and charcoal.
JOINTING
Flowpoint has been in use for over 20 years in a variety of project environments including public realm, landscaping and domestic
• Open to foot traffic in 1 hour• Open to vehicular traffic in 4 hours• Rapid setting• Exceptional bond strength• Shrinkage compensated• Mixes quickly on-site with water• Initial set after 15 minutes at 20°C
FLOWPOINTRapid Set Flowable Grout
NI: 028 3834 8600 / ROI: 048 3834 8600PromptDelivery
ProductsEx-stock
DedicatedSupport
On-siteDemo 5
SPECIALIST MATERIALS
SPECIALIST MATERIALS We provide an extensive range of brush in and gun injected jointing materials, epoxy bedding and concrete repair mortars, along with high bond strength vertical stone and brick slip adhesives.
Ideal for bonding coping stones, arris repairs, bedding granite setts and paving elements in recess covers and tree grids
• Workability: 30 minutes• Set time: 30 minutes• Open to traffic: 6 hours• Depth: 5-50mm• 75N/mm2 compressive strength in 7 days• 22.4N/mm2 flexural strength in 7 days• 15.6M/mm2 tensile strength in 7 days
RESI-BEDEpoxy Bedding and Concrete Repair Mortar
CEMPOINTGun Injected Mortar
UltraScape cempoint provides a quick and clean method of jointing both horizontal and vertical faces (such as cladding and steps), installed using a hand-held mortar gun.
• Mixed easily on-site with water• Conforms to BS 7533• Excellent compatibility• Resistance to freeze/thaw weather conditions• Shrinkage compensated• Fast and easy application
M60 FRapid Strength, Fibre Reinforced, Bedding Mortar
Our market leading rapid strength mortar, for use with all access covers, as well as for the bonding of granite setts, flags and bedding kerbs
• Workability: 5 - 10 minutes• Set time: 20 minutes• Depth: 10mm - 75mm• 24N/mm2 compressive strength in 1 hour
SLIPBONDVertical Stone and Brick Slip Adhesive
SlipBond is a flexible cladding adhesive for internal and external use, specially formulated with extended workability for fixing brick slips and natural stone to a range of substrates.
• Ideal for use in all weathers• Applied to a thickness of 3mm – 20mm• Frost resistant• Suitable for: brick slips and natural stone• Can be used with external wall installation
systems• Extended workability
NI: 028 3834 8600 / ROI: 048 3834 8600PromptDelivery
ProductsEx-stock
DedicatedSupport
On-siteDemo6
BRUSH-IN PAVE JOINTING SOLUTION
PREMJOINTPremjoint is a high specification, decorative brush-in pave jointing solution, suitable for use with granite, porcelain and other premium quality natural stone. It can be used all year round for domestic paving and light non-trafficable commercial areas.
NI: 028 3834 8600 / ROI: 048 3834 8600
PREMJOINTBrush-in pave joint solution
JET BLACK SLATE GREY NATURAL STONE
• Ideal for jointing domestic paving using a brush-in method in all weather conditions.
• Natural Stone, Slate Grey & Jet Black colour options
• Fine & coarse grades available• Enhanced workability• Walk on: 24-48 hours• Permeable• Fast & Easy application
Fine GradeFine Grade Fine GradeCoarse Grade Coarse Grade Coarse Grade
7
HEAD OFFICEEMTEK IRELAND LTDUnit 7, Lissue Industrial Estate WestLisburn, Co. AntrimBT28 2RE
E: [email protected]: 028 3834 8600ROI: 048 3834 8600
emtek.co.uk
On-site Demo
Prompt Delivery
Installation Service
Products Ex-stock
Dedicated Support
Emtek have been supporting clients across Ireland for over 25 years.
We aim to deliver great products and excellent service, with our field based customer support teams working alongside clients in Ulster, Leinster, Munster and Connaught. We’re here to help, so contact us today to discuss your project requirements.
Committed toExcellence
@emtekireland@emtekireland @emtekireland
Nationwide support
Site Survey
Neil McKee - Managing Director Garry Archer – Director
8