www.hyundai-ce.com 2009. 10 Rev 6

PLEASE CONTACT

ISO standard cabinAll-weather steel cab with all-around visibilitySafety glass windowsRise-up type windshield wiperSliding fold-in front windowSliding side windowLockable doorHot & cool boxAccessory box & Ashtray

Computer aided power optimization(New CAPO) system

3-power modeOne touch deceleration systemAuto warm up systemAuto overheat prevention system

Self diagnostic systemStarting aid (air grid heater), cold weatherCentralized monitoring

LCD displayEngine speedClock & Error codeGaugesFuel level gaugeEngine coolant temperature gaugeHyd. oil temperature gaugeWarningFuel levelCPUEngine oil pressureEngine coolant temperatureHyd. oil temperature Low batteryAir cleaner cloggingIndicatorPower maxPreheat & Engine warming-up One touch decel

Door and cab locks, one keyAM/FM radio and cassette

Radio remote switchTwo outside rearview mirrorsFully adjustable suspension seat with seat beltSlidable joystick, pilot-operatedConsole box tilting system(LH.)Three front working lightsElectric hornBatteries (2 x 12V x 80AH)Battery master switchRemovable clean out screen for oil coolerAutomatic swing brakeRemovable reservoir tankWater separator & fuel pre-filter, fuel lineBoom holding systemArm holding systemCounterweight (1,450kg, 3,200lb)Mono boom (4.3m, 14’ 1”)Arm (2.26m, 7’ 5”)Track shoes (500m, 20”)Track rail guardStarting aid (air grid heater), cold weatherFuel warmer

Air-conditioner (5,000 kcal/hr, 20,000 BTU/hr)Heater & defroster (7,500 Kcal/hr, 30,000 BTU/hr)Sun visor for cabin insideFuel filler pump (35 /min, 9.3 US gpm) Beacon lampSafety lock valve for boom cylinderwith overload warning deviceSafety lock valve for arm cylinderSingle acting piping kit (breaker, etc)Double acting piping kit (clamshell, etc)Accumulator, work equipment lowering12 volt power outlet (24V DC to 12V DC converter)Quick couplerTravel alarmVarious optional arms

Short arm (1.96 m, 6’ 5”)Long arm (2.81 m, 9’ 3”)

Various optional buckets (SAE heaped)Standard bucket (0.45 m3, 0.59yd3)Narrow bucket (0.30 m3, 0.39yd3)Narrow bucket (0.40 m3, 0.52yd3)Narrow bucket (0.50 m3, 0.65yd3)Light bucket (0.59 m3, 0.77yd3)

Cabin roof-cover transparentCabin lights Track shoes

Triple grousers shoe (600 mm, 24 )Triple grousers shoe (700 mm, 28 )

Lower frame under coverTool kitOperator suitSpecial cooling

Air vent type side door

Engine emergency control cable

SeatAdjustable air suspension seatMechanical suspension seat with heaterAdjustable air suspension seat with heater

Standard Equipment Optional Equipment

ROBEX 110-7

Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine shown may vary according to International standards.All US measurement rounded off to nearest pounds or inches.

110-7 / 110D-7

Photo may include optional equipment.

CRAWLER EXCAVATOR Applied Tier 2 Engine

02 ROBEX 110-7 03ROBEX 110-7

Robex 110-7Robex 110-7

A new chapter in constructionequipment has now begun.Making the dream a reality.

Built for Maximum Power, Performance, Reliability.

Photo may include optional equipment.

Centralized control panel

Horn button

Option button

Remote Radio control

Travel lever

Cluster

One touch decel button

Hour meter

Travel pedal

Fully adjustable suspension seat

Safety lever

Power boost button

Joystick control lever

Air Conditioner and Heater controller

The best working conditions in a pleasant environment.

Operator’s Comfort is Foremost. Wide Cab Exceeds Industry Standards. Operating Environment

123

Wide, Comfortable Operating Space Steel Cover Sunroof Dial Type Engine Speed Switch and Key Switch

04 ROBEX 110-7 05ROBEX 110-7

Storage box and Cup HolderAn additional storage box and cupholder are located behind operator’sseat, and it keeps food and beveragescool or hot.

Rise-up Wiper and CabinLightsRaise-up wiper has enhanced for thebetter front view. Cabin Lightsenhances safety by brightly lightingthe surroundings during nightwork(optional)

Rear Emergency Exit WindowRear Exit Window is designed witheasy exit for operator's safety.

Remote Radio Control andDeluxe Cassette

Smooth Travel Pedal and Foot Rests

Improved Intelligent DisplayInstrument Panel is installed in front ofRH console box. It is easy to check all critical systemswith easy-to-read indicators.

VisibilityEven more visibility than before, for safer, more efficient operating.

Excellent ventilationVentilation has been improved by the addition of the larger fresh air intake system, and by providing additional air flow throughout the cab.Sliding front and side windows provide improved ventilation.A large sunroof offers upward visibility and additional ventilation.

Comfortable operator environmentThe control levers and seat can be adjusted to provide maximum operator comfort. The seat is fully adjustable for optimum operating position, reducing operatorfatigue. Console boxes slide forward and backward for improved accessibility. The proportional pressure controls reduce unnecessary exertionwhile ensuring precise operation.Large windows allow excellent visibility in all directions.

Low noise designThe Robex 7 series was designed with low operation noise in mind.Hyundai engineering helps to keep interior and exterior noise levels to aminimum. The cab's noise levels have been additionally reduced by improving thedoor seals for the cab and engine compartments. An insulated diesel engine compartment with sound-damping materialalso reduces noise.

Easy-to-Reach Control PanelsSwitches and other essential controlsare located near the operator. This helps keep operator movementto a minimum, enhancing control withless operator fatigue.

Wide Cab with ExcellentVisibilityThe cab is roomy and ergonomicallydesigned with low noise level andgood visibility.A full view front window and largerear and side windows provideexcellent visibility in all directions.

Highly Sensitive Joystick andEasy EntranceNew joystick grips for precise controlhave been equipped with doubleswitches. (Left: Power boost / One touchdeceleration, Right: Horn/Optional)

Wide, Comfortable OperatingSpaceAll the controls are designed andpositioned according to the latestergonomic research.Reinforced pillars have also beenadded for greater cab rigidity.

CAB

Photo may include optional equipment.

Increased higher performanceStrong and Stable Lower FrameReinforced box-section frame is all welded, low-stress, high-strength steel. It guarantees safety and resistance against external impact when driving on rough ground and working onwet sites through high tensile strength steel panels, with highly durable upper and lower rollers and trackguards.Long undercarriage incorporates heavy duty excavator style components.X-leg type center frame is integrally welded for maximum strength and durability.

Track Rail Guide & AdjustersDurable track rail guides keep track links in place. Track adjustment is made easy with standard grease cylindertrack adjusters and shock absorbing springs.

Powerful and Preciser Swing ControlImproved shock absorbing characteristics make stoppinga precise and smooth action

Minimization of Shock and Vibrationthrough Cab Mounting SystemThe application of Viscous Mounting to the cabinsupport provides the operator with a muchimproved ride. The operator work efficiency will increase as theshock and noise level in the cabin decreases.

Mitsubishi S4K-T ENGINEThe four cylinders turbo-charged Mitsubishi S4K-Tengine is built for power, reliability and economy. This engine meets EPA tier II and EU stage IIemission regulation.

Reliability You Can Depend OnMitsubishi S4K-T engine is an ideal solution for thetoughest work environment.The engine is built from laser hardened cast ironcylinder block, eight balance, one-piece, forgedcrankshaft and heat resistant aluminum alloypistons. This combination provides maximum strength,rigidity and low fuel and oil consumption.

The S4K-T engine is capable of reaching emissionstandards without electronic engine controls. Youget a proven power plant that meets ecologicalconcerns, without paying a premium for technologyyou don’t need.

Reinforced Bucket and Bucket LinkageSealed and adjustable bucket linkage provides lesswear of pins and bushes as well as silent operation. The design includesbucket link durability and anti wear characteristics.Additional reinforcement plates on cutting edgesection. Reinforced bucket is made with thickersteel and additional lateral plate.

Advanced capo system New mode control system

Advanced hydraulic system

Advanced CAPO SystemThe Advanced CAPO(Computer Aided PowerOptimization) system maintains engine and mutualpump power at optimum levels. Mode selectionsare designed for various work loads andmaintaining high performance while reducing fuelconsumption. Features such as power boost are included in thesystem. The system monitors engine speed, coolanttemperature, and hydraulic oil temperature.Contained within the system are self diagnosticcapabilities, which are displayed by error codes onthe cluster.

Self Diagnosis SystemThe CPU controller diagnoses problems in the CAPOsystem caused by electric and hydraulicmalfunctions and displays them on the LCD monitorof the cluster by error codes. This controller has thecapacity to identify 26 distinct types of errors. As theinformation from this device, such as engine rpm,main pump delivery pressure, battery voltage, hyd.temperature, and the state of all types of electricswitches, provides the operator with a much moreexact state of machine operating condition. This makes the machine easier to troubleshootwhen anything does go wrong.

Arm Flow Regeneration SystemArm flow regeneration valve provides smooth arm-in operation without cavitations.

Boom & Arm Holding System The Holding valves in the main control valveprevents the boom & arm from dropping over anextended period in neutral position.

One Touch DecelerationWhen the one touchdeceleration button on top of LHjoystick is pushed once, theengine rpm will be immediatelydown to low idle rpm.

Engine speed will be recovered to its preselectedrpm in case the button is pushed once more.

Automatic Engine Overheat PreventionIf the engine coolant temperature gets too high, theCPU controller lowers the engine speed and coolsthe engine.

Anti Restart SystemThe new system protects the starter from restartingduring engine operation, even if the operatoraccidentally turns the start key again.

Power boost control SystemWhen the power boost system is activated, diggingpower increases about 10%. It is especially usefulwhen extra power is temporarily needed, forinstance, when digging hard earth and rock, or if thebucket teeth are stopped by a stubborn tree root.

Automatic Warming-up SystemAfter the engine is started, if the engine coolanttemperature is low, the CPU controller increases theengine speed and automatically to warm up theengine more effectively.

Pump Flow Control SystemIn neutral position: Pump flow is reduced to aminimum to eliminate power loss. In operation: Maximum pump flow is delivered tothe actuator to increase the speed. With movementof the control lever, pump flow is automaticallyadjusted and the actuator speed can beproportionally controlled.

Hydraulic Damper in Travel PedalImproved travel controllability & feeling by shockreducing when starting and stopping.

POWER MODEH mode : High power S mode : Standard powerL mode : Light power

06 ROBEX 110-7 07ROBEX 110-7

Reliability & Serviceability

09ROBEX 110-7

Side Cover with Left & Right Swing OpenTypeEasy access to vital components gives unrestrictedview of component allows easy maintenance andrepair.

Highly efficient Hydraulic PumpPump output and Hydraulic tank capacity havebeen increased.A pilot pump has been installed resulting inimproved control sensitivity.

Easy to maintain engine componentsThe cooling and preheating system are provided for optimum and immediate operation, guaranteeing longerlife for the engine and hydraulic components. Servicing of the engine and hydraulics is considerably simplified due to total accessibility.

Centralized Electric Control Box and EasyChange Air Cleaner AssemblyElectric control box and Air cleaner are centralizedin one or the same compartment for easy service.

Large tool box for extra storage

Durability of structure proventhrough FEM(Finite ElementMethod) analysis and long termdurability test.

08 ROBEX 110-7

Robex 110-7Robex 110-7

Photo may include optional equipment.

10 ROBEX 110-7 11ROBEX 110-7

Engine Buckets

Backhoe attachment

Digging force

Swing system

Coolant & Lubricant capacity

Undercarriage

Operating weight (approximate)

Major component weight

Operating weight

Hydraulic system

Model

Capacitym3 (yd3)

ArmLengthWeight

mm(ft-in)kg(lb)

1,960mm (6'5")320(710)

2,260mm (7' 5")340(750)

2,810mm (9'3")400(880)

Remark

SAEheaped

CECEheaped

Widthmm (in)

Withoutside cutters

Withside cutters

Weightkg(lb)

Recommendation mm(ft.in)4,300 (14’ 1”) Mono Boom

1,960 (6’ 5”) 2,260 (7’ 5”) 2,810 (9’ 3”)

(Refilling)

ShoesType

Triplegrouser

Bucketdiggingforce

SAE

ISO

kNkgflbfkNkgflbf

Armcrowdforce

SAE

ISO

kNkgflbfkNkgflbf

Standard equipment

Standard equipment

Width mm(in)

500(20”)

600(24”)

700(28”)

kg(lb)R110-7 11,200(24,690)

11,900 (26,230)11,500(25,350)12,200(26,900)11,800(26,010)12,500(27,560)

R110-7

R110-7

R110D-7

R110D-7

R110D-7

kgf/cm2(psi)0.39(5.55)0.42(5.97)0.34(4.84)0.36(5.12)0.30(4.27)0.31(4.41)

Ground pressureOperating weight

liter US gal

Mitsubishi S4K-T

Type

Fuel tankEngine coolant Engine oilSwing deviceFinal drive(each)Hydraulic system(including tank)Hydraulic tank

0.30 (0.39)0.40 (0.52)0.45 (0.59)0.50 (0.65)0.59 (0.77)

0.27 (0.35)0.36 (0.47)0.40 (0.52)0.45 (0.59)0.52 (0.68)

610 (24.0)760 (29.9)830 (32.7)900 (35.4)

1,020 (40.2)

720 (28.3)870 (34.3)940 (37.0)

1,010 (39.8)1,130 (44.5)

360 (790)410 (900)430 (950)450 (990)

490 (1,080)

Center frameTrack frameNo. of shoes on each sideNo. of carrier roller on each sideNo. of track roller on each sideNo. of rail guard on each side

UpperstructureCounterweightBoom (with Arm cylinder)

3,300kg (7,280lb)1,450kg (3,200lb)

950kg (2,090lb)

X - leg typePentagonal box type41161

25024

17.52.52.5

180100

66.06.34.60.70.7

47.626.4

55.05.33.80.50.5

39.622.0

Swing motorSwing reductionSwing bearing lubricationSwing brakeSwing speed

Axial piston motorPlanetary gear reductionGrease-bathedMulti wet disc13.0 rpm

Water cooled, 4 cycle Diesel.4 Cylinders in line, direct injectionturbocharged and low emission

J1995(gross)J1349(net)

6271/1(gross)6271/1(net)

Ratedhorse

power

Max. torqueBore X strokePiston displacementBatteriesStarter motorAlternator

SAE

DIN

94HP(70kW) at 1,950rpm84HP (63kW) at 1,950rpm95PS(70kW) at 1,950rpm85PS (63kW) at 1,950rpm

37.9kgf.m(274 lbf.ft) at 1,400rpm102 x 130mm (4.0'' x 5.1'')

4,249cc (259 cu in)2 x 12V x 80AH

24V-5.0kW24V- 50 Amp

Main pump

Hydraulic motors

Relief valve setting

Hydraulic cylinders

Specifications Specifications Backhoe attachmentBackhoe attachment

TypeMax. flowSub-pump for pilot circuitCross-sensing and fuel saving pump system

Drives & Brakes

Control

Travel

Swing

Implement circuitsTravelPower boost (boom, arm, bucket)Swing circuitPilot circuitService valve

Drive methodDrive motorReduction systemMax. drawbar pullMax. travel speed(high) / (low)GradeabilityParking brake

Traveling and steeringEngine throttleExternal lights

Two levers and pedalsElectric, Dial typeTwo lights mounted on the boom, one under the battery box

Pilot pressure operated joysticks and pedals with detachable lever provide almosteffortless and fatigueless operation.

X-leg type center frame is integrally welded with reinforced box-section trackframes. The undercarriage includes lubricated rollers, idlers, track adjusters withshock absorbing spring and sprockets, and track chain with double or triple grousershoes.

Boom and arms are of all-welded, low-stress, full-box section design. 4,300mm(14’ 4”) mono boom and 1,960m(6’ 5”), 2,260m (7’ 5”), 2,810mm (9’ 3”) arm are available. Buckets are all-welded, high-strength steel implements.

Operating weight, including 4,300mm (14’ 1”) boom, 2,260m (7’ 5”) arm, SAE heaped0.45m3 (0.59yd3) backhoe bucket, lubricant, coolant, full fuel tank, hydraulic tank andthe standard equipment.

Fully hydrostatic typeAxial piston motor, in-shoe designPlanetary reduction gear11,000 kgf ( 24,250 lbf)5.5 km/hr ( 3.4mph) / 3.4 km/hr ( 2.1mph)35° (70%)Multi wet disc

No. of cylinder-bore x stroke

Pilot control Two joysticks with one safety lever(LH): Swing and arm, (RH): Boom and bucket(ISO)

Boom: 2 - 95 x 1015mm (3.7" x 40.0")Arm: 1 - 110 x 1070mm (4.3" x 42.1")Bucket: 1 - 95 x 855mm (3.7" x 33.7")Blade: 2-100 x 240mm (3.9" x 9.4")

330 kgf/cm2(4,690psi)330 kgf/cm2 (4,690 psi)360 kgf/cm2(5,120psi)240 kgf/cm2(3,410psi)

35 kgf/cm2(498psi)Installed

Axial piston motor with automatic brake

Two speed axial piston motorwith brake valve and parking brake

Two variable displacement piston pumps2 x 112 /min ( 29.6US gpm / 24.6UK gpm)

Gear pump

UK gal

Applicable for materials with density of 2,000 kg / m3 (3,370 lb / yd3) or lessApplicable for materials with density of 1,600 kg / m3 (2,700 lb / yd3) or lessApplicable for materials with density of 1,100 kg / m3 (1,850 lb / yd3) or less

: Standard backhoe bucket

SAE heapedm3 (yd3)

0.30(0.39) 0.40(0.52) 0.50(0.65) 0.59(0.77)0.45(0.59)

Arm

78.5[85.6]8,000[8,730]

17,640[19,240]90.2[98.4]

9,200[10,040]20,280[22,120]

78.5[85.6]8,000[8,730]

17,640[19,240]90.2[98.4]

9,200[10,040]20,280[22,120]

78.5[85.6]8,000[8,730]

17,640[19,240]90.2[98.4]

9,200[10,040]20,280[22,120] [ ] :

Power Boost60.2[65.7]6,140[6,700]

13,540[14,770]62.9[68.6]

6,410[6,990]14,130[15,410]

55.7[60.8]5,680[6,200]

12,520[13,660]58.1[63.3]

5,920[6,460]13,050[14,240]

48.1[52.4]4,900[5,350]

10,800[11,780]49.7[54.2]

5,070[5,530]11,180[12,200]

1,960mm (6’ 5”) 2,260mm (7’ 5”) 2,810mm (9’ 3”)

A

B

C

D

D’

E

F

G

H

Description Description

Description

R110-7 R110D-7

R110D-7

1,960 (6' 5'')

7,240 (23' 9'')

2,550 (8' 4'')

500 (20")

2,490 (8' 2'')

4,300 (14' 1'') mono boom

2,260 (7' 5'')

7,270 (23' 10'')

2,720 (8' 11'')

600 (24")

2,590 (8' 6'')

2,810 (9' 3")

7,230 (23' 9'')

3,060 (10' 0'')

700 (28")

2,690 (8' 10'')

12 ROBEX 110-7 13ROBEX 110-7

Dimensions & Working rangedDimensions & Working ranged

Dimensions R110-7

C

D,D'

AB

I

J F

G

E

HL

K

Tumbler distance

Overall length of crawler

Ground clearance of counterweight

Tail swing radius

Rear-end length

Overall width of upperstructure

Overall height of cabin

Min. ground clearance

Track gauge

2,610 (8’7”)

3,340 (10’11”)

900 (2’11”)

2,130 (7’0”)

2,110 (6’11”)

2,475 (8’1”)

2,800 (9’2”)

440 (1’5”)

1,990 (6’6”)

I

J

K

L

Boom length

Arm length

Overall length

Overall height of boom

Track shoe width

Overall width

Boom length

1,960(6'5")

2,260 (7' 5'')

2,810(9' 3")

Arm length

7,460(24' 6'')

7,740(25'5")

8,270(27' 2'')Max. digging reach

7,320(24' 0'')

7,610(25' 0")

8,140(26' 8'')

Max. digging reach on ground

4,770(15' 8'')

5,090(16' 8'')

5,620(18' 5'')Max. digging depth

4,510(14' 10'')

4,870(16' 0")

5,410(17' 9'')

Max. digging depth(8' level)

4,070(13' 4'')

4,430(14' 6'')

4,940(16' 2'')

Max. vertical digging depth

7,900(25' 11'')

8,070(26' 6'')

8,460(27' 9'')Max. digging height

5,540(18' 2'')

5,710(18' 9'')

6,100(20' 0'')Max. dumping height

2,340(7' 8'')

2,380(7' 10'')

2,510(8' 3'')Min. swing radius

A

A’

B

B’

C

D

E

F

4,300 (14' 1'') Mono boom

mm (ft in) mm (ft in)

mm (ft in)

1,960 (6' 5'')

7,620 (25' 0'')

2,550 (8' 4'')

500 (20")

2,490 (8' 2'')

2,260 (7' 5'')

7,650 (25' 1'')

2,720 (8' 11'')

600 (24")

2,590 (8' 6'')

2,810 (9' 3")

7,610 (25' 0'')

3,060 (10' 0'')

700 (28")

2,690 (8' 10'')

Dimensions R110D-7

J

D,D'

AB ON

M

C

I

F

G

E

HL

K

Working ranges R110-7

B' C

BD

9

8

7

6

5

4

3

2

1

0

1

2

3

4

5

69

30 25 20 15 10 5 0

8 7 6 5 4 3 2 1 0

E

A

A'F

A

B

C

D

D’

E

F

G

H

M

N

Tumbler distance

Overall length of crawler

Ground clearance of counterweight

Tail swing radius

Rear-end length

Overall width of upperstructure

Overall height of cabin

Min. ground clearance

Track gauge

Ground Clearance of blade up

Depth of blade down

2,610 (8’7”)

3,340 (10’11”)

900 (2’11”)

2,130 (7’0”)

2,110 (6’11”)

2,475 (8’1”)

2,800 (9’2”)

440 (1’5”)

1,990 (6’6”)

500 (1' 8'')

520 (1' 8'')

I

J

K

L

O Height of blade

Width of blade

Boom length

Arm length

Overall length

Overall height of boom

Track shoe width

Overall width

550 (1' 10'')

2,500 (8' 2'')

4,300 (14' 1'') Mono boom

mm (ft in) mm (ft in)

Standard equipment

Standard equipment

Standard equipment

Working ranges R110D-7

30 25 20 15 10 5 0

B' C

BD

9

8

7

6

5

4

3

2

1

0

1

2

3

4

5

69 8 7 6 5 4 3 2 1 0

E

A

A'F

Description R110-7

4,300 (14' 1'') mono boomBoom length

1,960(6'5")

2,260 (7' 5'')

2,810(9' 3")

Arm length

7,460(24' 6'')

7,740(25'5")

8,270(27' 2'')Max. digging reach

7,320(24' 0'')

7,610(25' 0")

8,140(26' 8'')

Max. digging reach on ground

4,770(15' 8'')

5,090(16' 8'')

5,620(18' 5'')Max. digging depth

4,510(14' 10'')

4,870(16' 0")

5,410(17' 9'')

Max. digging depth(8' level)

4,070(13' 4'')

4,430(14' 6'')

4,940(16' 2'')

Max. vertical digging depth

7,900(25' 11'')

8,070(26' 6'')

8,460(27' 9'')Max. digging height

5,540(18' 2'')

5,710(18' 9'')

6,100(20' 0'')Max. dumping height

2,340(7' 8'')

2,380(7' 10'')

2,510(8' 3'')Min. swing radius

A

A’

B

B’

C

D

E

F

mm (ft in)

Standard equipment

14 ROBEX 110-7 15ROBEX 110-7

Lifting CapacitiesLifting Capacities

Lifting capacities R110-7Rating over-front Rating over-side or 360 degree Rating over-front Rating over-side or 360 degree

Boom: 4.3 m (14’ 1”) Arm: 2.26 m (7’ 5”) Bucket: 0.45 m3 (0.59yd3) SAE heaped Shoe : 500mm(20”) triple grouser with 1,450kg(3,200 lb) CWT

Load Pointheight m(ft)

6.0m20.0ft

*1,750*3,860

*1,750*3,860

1,5603,440

5.99(19.7)

*1,790*3,950

*1,530*3,370

1,4903,280

1,5203,350

1,1302,490

6.92(22.7)

*2,820*6,220

*2,820*6,220

*2,270*5,000

1,9404,280

1,4503,200

1,3002,870

9402,070

7.38(24.2)

*4,700*10,360

4,3709,630

*2,970*6,550

1,8404,060

1,3603,000

1,2402,730

8801,940

7.46(24.5)

5,66012,480

3,9508,710

2,8306,240

1,7603,880

1,2802,820

1,3002,870

9302,050

7.18(23.6)

*5,580*12,300

*5,580*12,300

5,55012,240

3,8508,490

2,7406,040

1,7203,790

1,2402,730

1,5603,440

1,1302,490

6.49(21.3)

*8,530*18,810

*8,530*18,810

*5,440*11,990

3,9308,660

2,7706,110

*1,750*3,860*1,790*3,950*2,270*5,0002,2504,9602,0604,5401,9804,3702,0104,430

*2,270*5,000

1,7303,810

5.17(17.0)

kglb

4.5m15.0ft

kglb

3.0m10.0ft

kglb

1.5m5.0ft

kglb

GroundLine

kglb

-1.5m-5.0ft

kglb

-3.0m-10.0ft

kglb

Load radius At max. reach

1.5m (5.0ft) 3.0m (10.0ft) 4.5m (15.0ft) 6.0m (20.0ft) Capacity Reach

m(ft)

Boom: 4.3 m (14’ 1”) Arm: 1.96 m (6’ 5”) Bucket: 0.45 m3 (0.59yd3) SAE heaped Shoe : 500mm(20”) triple grouser with 1,450kg(3,200 lb) CWT

Load Pointheight m(ft)

6.0m20.0ft

*1,770*3,900

*1,820*4,010

1,7103,770

5.62(18.4)

*1,950*4,300

1,6103,550

1,1802,600

6.62(21.7)

*3,160*6,970

*3,160*6,970

*2,410*5,310

1,8704,120

1,3803,040

1,3502,980

9702,140

7.10(23.3)

*4,940*10,890

4,1509,150

2,9306,460

1,7803,920

1,2902,840

1,2802,820

9102,010

7.18(23.6)

5,49012,100

3,8008,380

2,7406,040

1,7003,750

1,2202,690

1,3603,000

9602,120

6.89(22.6)

*6,090*13,430

*6,090*13,430

5,44011,990

3,7508,270

2,6705,890

1,6703,680

1,2002,650

6.15(20.2)

*9,180*20,240

*9,180*20,240

*5,080*11,200

3,8808,550

2,7506,060

*1,770*3,900*1,950*4,3002,3905,2702,1504,7401,9804,3701,9104,2101,9804,370

kglb

4.5m15.0ft

kglb

3.0m10.0ft

kglb

1.5m5.0ft

kglb

GroundLine

kglb

-1.5m-5.0ft

kglb

-3.0m-10.0ft

kglb

Load radius At max. reach

1.5m (5.0ft) 3.0m (10.0ft) 4.5m (15.0ft) 6.0m (20.0ft) Capacity Reach

m(ft)

Boom: 4.3 m (14’ 1”) Arm: 2.81 m (9’ 3”) Bucket: 0.45 m3 (0.59yd3) SAE heaped Shoe : 500mm(20”) triple grouser with 1,450kg(3,200 lb) CWT

Load Pointheight m(ft)

6.0m20.0ft

*1,570*3,640

1,2902,840

6.66(21.9)

1,3302,930

9802,160

7.50(24.6)

*1,920*4,230

*1,830*4,030

*1,640*3,620

1,5003,310

1,5703,460

1,1602,560

8301,830

7.92(23.3)

*4,050*8,930

*4,050*8,930

*2,690*5,930

1,8904,710

1,4103,110

1,1002,430

7801,720

7.99(26.2)

*5,580*12,300

4,1109,060

2,9006,390

1,7903,9501,7303,810

1,3102,8901,2502,760

1,1502,540

8201,810

7.74(25.4)

*4,960*10,930

*3,230*7,120

*4,960*10,930

*3,230*7,120

5,62012,390

3,9208,640

2,7706,110

1,3302,9301,8304,030

9602,1201,3502,980

7.11(23.2)5.96

(19.6)*7,230

*15,940*7,230

*15,9405,630

12,410*4,480*9,880

3,9308,6604,1009,040

2,7606,080

*1,920*4,2302,3405,1602,1304,7002,0104,4302,0004,410

kglb

4.5m15.0ft

kglb

3.0m10.0ft

kglb

1.5m5.0ft

kglb

GroundLine

kglb

-1.5m-5.0ft

kglb

-3.0m-10.0ft-4.5m-15.0ft

kglbkglb

Load radius At max. reach

1.5m (5.0ft) 3.0m (10.0ft) 4.5m (15.0ft) 6.0m (20.0ft) Capacity Reach

m(ft)

Lifting capacities R110D-7

Boom: 4.3 m (14’ 1”) Arm: 2.26 m (7’ 5”) Bucket: 0.45 m3 (0.59yd3) SAE heaped Shoe : 500mm(20”) triple grouser with 1,450kg(3,200 lb) CWT

Load Pointheight m(ft)

6.0m20.0ft

*1,750*3,860

*1,750*3,860

*1,750*3,860

5.99(19.7)

*1,790*3,950

*1,530*3,370

*1,530*3,370

1,6503,640

1,3402,950

6.92(22.7)

*2,820*6,220

*2,820*6,220

*2,270*5,000

*2,060*4,540

1,7103,770

1,4203,130

1,1402,510

7.38(24.2)

*4,700*10,360

*4,700*10,360

*2,970*6,550

2,0004,410

1,6203,570

1,3603,000

1,0802,380

7.46(24.5)

*5,860*12,920

4,75010,470

3,0606,750

1,9104,210

1,5403,400

1,4303,150

1,1402,510

7.18(23.6)

*5,580*12,300

*5,580*12,300

5,98013,180

4,64010,230

2,9706,550

1,8804,140

1,5003,310

1,7003,750

1,3603,000

6.49(21.3)

*8,530*18,810

*8,530*18,810

*5,440*11,990

4,72010,410

3,0006,610

*1,750*3,860*1,790*3,950*2,270*5,000

2,6505,8402,4605,4202,3705,2202,4005,290

*2,270*5,000

2,0504,520

5.17(17.0)

kglb

4.5m15.0ft

kglb

3.0m10.0ft

kglb

1.5m5.0ft

kglb

GroundLine

kglb

-1.5m-5.0ft

kglb

-3.0m-10.0ft

kglb

Load radius At max. reach

1.5m (5.0ft) 3.0m (10.0ft) 4.5m (15.0ft) 6.0m (20.0ft) Capacity Reach

m(ft)

Boom: 4.3 m (14’ 1”) Arm: 1.96 m (6’ 5”) Bucket: 0.45 m3 (0.59yd3) SAE heaped Shoe : 500mm(20”) triple grouser with 1,450kg(3,200 lb) CWT

Load Pointheight m(ft)

6.0m20.0ft

*1,770*3,900

*1,820*4,010

*1,820*4,010

5.62(18.4)

*1,950*4,300

1,7503,860

1,4203,130

6.62(21.7)

*3,160*6,970

*3,160*6,970

*2,410*5,310

2,0204,450

1,6403,620

1,4803,260

1,1802,600

7.10(23.3)

*4,940*10,890

*4,940*10,890

*3,060*6,750

1,9404,280

1,5603,440

1,4103,110

1,1202,470

7.18(23.6)

*5,870*12,940

4,58010,100

6,9706,550

1,8604,100

1,4803,260

1,4903,280

1,4802,600

6.89(22.6)

*6,090*13,430

*6,090*13,430

*5,860*12,920

4,54010,010

2,9006,390

1,8204,010

1,4603,220

6.15(20.2)

*9,180*20,240

*9,180*20,240

*5,080*11,200

4,67010,300

2,9806,570

*1,770*3,900*1,950*4,300*2,410*5,310

2,5505,6202,3705,2202,3105,0902,3805,250

kglb

4.5m15.0ft

kglb

3.0m10.0ft

kglb

1.5m5.0ft

kglb

GroundLine

kglb

-1.5m-5.0ft

kglb

-3.0m-10.0ft

kglb

Load radius At max. reach

1.5m (5.0ft) 3.0m (10.0ft) 4.5m (15.0ft) 6.0m (20.0ft) Capacity Reach

m(ft)

Boom: 4.3 m (14’ 1”) Arm: 2.81 m (9’ 3”) Bucket: 0.45 m3 (0.59yd3) SAE heaped Shoe : 500mm(20”) triple grouser with 1,450kg(3,200 lb) CWT

Load Pointheight m(ft)

6.0m20.0ft

*1,570*3,640

1,5203,350

6.66(21.9)

1,4503,200

1,1702,580

7.50(24.6)

*1,920*4,230

*1,830*4,030

*1,640*3,620

1,7703,900

*1,640*3,620

1,2702,800

1,0202,250

7.92(23.3)

*4,050*8,930

*4,050*8,930

*2,690*5,930

2,0504,520

1,6703,680

1,2102,670

9602,120

7.99(26.2)

*5,580*12,300

4,91010,820

3,1306,900

1,9504,3001,8904,170

1,5703,4601,5103,330

1,2602,780

1,0002,200

7.74(25.4)

*4,960*10,930

*3,230*7,120

*4,960*10,930

*3,230*7,120

6,06013,360

4,71010,380

3,0006,610

1,4603,2201,9904,390

1,1702,5801,6103,550

7.11(23.2)5.96

(19.6)*7,230

*15,940*7,230

*15,940*5,830

*12,850*4,480*9,880

4,72010,410*4,480*9,880

2,9806,570

*1,920*4,230*2,690*5,930

2,5305,5802,4105,3102,3905,270

kglb

4.5m15.0ft

kglb

3.0m10.0ft

kglb

1.5m5.0ft

kglb

GroundLine

kglb

-1.5m-5.0ft

kglb

-3.0m-10.0ft-4.5m-15.0ft

kglbkglb

Load radius At max. reach

1.5m (5.0ft) 3.0m (10.0ft) 4.5m (15.0ft) 6.0m (20.0ft) Capacity Reach

m(ft)

NOTES 1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of tipping load

with the machine on firm, level ground or 87% of full hydraulic capacity.

3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.

NOTES 1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of tipping load

with the machine on firm, level ground or 87% of full hydraulic capacity.

3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.