SSSetter Manufacturing Division - The Western...
Transcript of SSSetter Manufacturing Division - The Western...
Product Guide
Setter Manufacturing DivisionSetter Manufacturing DivisionSetter Manufacturing Division Your Sprayer
Parts Depot
Chemical Management SystemsElectric Hose Reels
Sprayer NozzlesSprayer Parts
NH3 SystemsGPS Systems
Poly FittingsPVC Fittings
SprayersMonitors
EnginesValves
Pumpswww.settermfg.com1.866.708.8902 Russell, MB
Division of Setter Triple S Ltd.
Proudly serving the Agriculture Industry for over 40 years
@SetterMFG
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 2 Phone for current pricing
IndexItem .........................................................................Page #ABOUT US .....................................................................................................71Ag Camera Systems ..................................................................................69Antennas .....................................................................................................6 Phoenix 200...........................................................................................6 Phoenix 300 ............................................................................................6Banjo ...................................................................................................16-21Boom Clamp .........................................................................................23, 30Boom Express End Cap .......................................................................24, 25Bulkhead Fittings ........................................................................................21Cab Filter- Dutch .......................................................................................52Caps Fertilizer ........................................................................................22, 34 Nozzle caps ....................................................................................22, 28 Twin Cap .............................................................................................. 33ChemSaver ................................................................................................ 27Clamps Boom Clamps (Dry) ......................................................................23, 30 Banjo T Bolt .........................................................................................54 Blumhardt Snap Lock .........................................................................54 Flanged/Manifold ................................................................................18 Hose Clamp .........................................................................................54 Round ..................................................................................................30 Square ...........................................................................................23, 30 U-Bolt ...................................................................................................21Engines Honda ...................................................................................................61 Hypro ....................................................................................................61Engine Covers, Poly ....................................................................................61Fertilizer Systems ................................................................................ 33, 34Filters ..................................................................................................19, 58Fittings Banjo ...............................................................................................16-21 Blumhardt ........................................................................................... 35 Garden Hose ........................................................................................51 Nylon ...................................................................................................50 Manifold ......................................................................................... 18, 19 PVC .................................................................................................48, 49Flowmeter .................................................................................. 8, 10, 20, 56Flow Divider Impellicone—John Blue .....................................................................39 Exacto-Flow—John Blue ....................................................................39
Foam Marker Parts ......................................................................................61Foam Marker Foam Agrifoam ..............................................................................................61 Dye .......................................................................................................61
Fuel Tank— EnviroSlip, EnduraPlas .......................................................... 57Gasoline Additive .......................................................................................61Gauges .......................................................................................................38GPA Calibration Bottle ..............................................................................52GPS Systems ............................................................................................6-8 Raven ................................................................................................6-8 TOPCON (ZYNX) repair Grain Auger and Bin Alarm ...................................................................... 60Grain Bags (DryloBags) .............................................................................70Hitch & Winch ...........................................................................................55Hoses ....................................................................................................... 53 High Pressure Pulse Hose .................................................................. 32Hose Cutters .............................................................................................. 53Hose Reels .................................................................................................54Liquid Injector .......................................................................................9, 32
Micro-Trak Systems, Inc. Astro II Speed Sensor .......................................................................... 10 Calc-An-Acre II .................................................................................... 10 Electronic Pump Driver (EPD) .............................................................12 Flow-Trak II .......................................................................................... 10 GSC-1000 ............................................................................................. 14
Hydraulic Flow Control Valve ..............................................................12 MT-3405D .............................................................................................12 NH3 500 Kit & Liquifier JR ....................................................................13 ProPlant ...............................................................................................12 Rate King (Auto-Rate controller) ........................................................ 11 Rate King Plus (Auto-Rate controller) ................................................ 11 Safe-Guard (Blockage Monitor) ......................................................... 14 Shaft-Trak ............................................................................................ 14 SprayMate II ......................................................................................... 11 The Liquifier Kit ...................................................................................13 Vansco Radar ...................................................................................... 10 Whirlwind Blockage Monitor .............................................................15
Mix Tank .....................................................................................................55Monitor .............................................................................................6, 7, 8-15Nozzles Boomless ......................................................................................25, 30 Fan Nozzle ........................................................................................... 32 High Volume Cleaning ....................................................................... 32 Spray Tips Air Bubble Jet ............................................................................... 33 TeeJet ............................................................................................29 Air Induction Tips/Caps ......................................................... 22, 33 Blumhardt Cone Tip ...................................................................... 35 Combo-Jet Tip/Cap ......................................................................22 CP Turbo Nozzles .......................................................................... 33 Hypro (Express Boom) ...........................................................24, 25 Hypro XT .......................................................................................25 Off Centre .....................................................................................29 Plug ............................................................................................... 27 VariTarget ............................................................................................34Nozzle Bodies Dry Boom/Wet Combo Jet ....................................................................................23 Hypro ............................................................................................25 TeeJet ......................................................................................26, 27 Locknut ................................................................................................30 Swivel ..................................................................................................30Nozzle Fittings Nylon/Poly ..........................................................................................30Oil Pump Oil–Hypro .................................................................................62Orifices .................................................................................................22, 34Pipe PVC (Bell End) .....................................................................................49Pressure Washers & Accessories .............................................................. 32Pumps ACE and WART HOG Water Pump .......................................................68 Chemical Transfer Pumps ...................................................................56 Fuel pumps and Meters ...................................................................... 57 Honda ...................................................................................................61 Hypro Centrifugal .............................................................................64-67 Diaphragm ....................................................................................62 Hydraulic and Couplers ..........................................................64-67 Transfer.................................................................................... 56, 61 Roller .......................................................................................62, 63 12 Volt Pumps ...............................................................................62 CDS-John Blue ........................................................................ 39-45 Diaphragm ....................................................................................39 Liquid Metering .................................................................39, 56, 62 Shurfllo ................................................................................................62PVC Fittings ..........................................................................................48, 49 PVC Pipe ..............................................................................................49 PVC Primer/ Cement ..........................................................................49Quick Calibrator ........................................................................................52Raven .....................................................................................................6-9Reflective Stripes ......................................................................................52
Respirators 3M Mask ................................................................................................52 Cartridge, 3M ......................................................................................52 Filters, 3M ............................................................................................52
Row Applicator Kit .....................................................................................29Safety Equipment Disposable Coveralls ..........................................................................52 Pesti-Rinser ........................................................................................52 Polypropylene ....................................................................................52 Tyvek ...................................................................................................52 Goggles ...............................................................................................52 Gloves ...................................................................................................62Saftifil ...................................................................................................... 60Screen Foot Valve Screen ...............................................................................58 Pond Filter Screens ............................................................................58
SETTER’S 3”Management system ............................................................55
Solenoids Blumhardt ........................................................................................... 35 TeeJet ..................................................................................................28 Texas Remcor ................................................................................46, 47Sotera & Shurflo Transfer pumps .............................................................56Spray Guns ..................................................................................................31Sprayers 3pt Hitch ............................................................................................3, 4 60 Gallon ........................................................................................... 3, 5 ATV Sprayer ...........................................................................................5 Back Pack Sprayers ............................................................................56 Little Big Sprayer, The ..........................................................................3 Research ................................................................................................3 Spot ...............................................................................................3, 4, 5Sprayer Boom Aluminum ...........................................................................................49 Poly .....................................................................................................56 PVC .......................................................................................................49 Wilger SS Booms .................................................................................23Strainer Banjo ................................................................................................... 19 Combo Jet ...........................................................................................22 TeeJet ..................................................................................................28
Tanks - Agricultural ..................................................................................59 - Granular Mix Tank Kit ..................................................................55 - Fuel– Enviro Slip .......................................................................... 57Tank Lids/ Accessories ............................................................................. 60Tank Rinsing Nozzle TEEJET ..................................................................... 60Tru-Kleen systems .....................................................................................55Tank Sump Fittings ...................................................................................59Teflon Tape and True Blue Sealant ...........................................................38Ties (Nylon) (Blumhardt re-usable) .........................................................54Valves 3 Way Ball ...........................................................................................20 Ball .................................................................................................20, 58 Check ...................................................................................................58 Brass Ball .............................................................................................58 Drain Cock ...........................................................................................58 Electric .......................................................................................... 20, 46 Pressure Relief .................................................................................... 19 Pressure Regulator .................................................................. 11, 28, 46 Solenoid .................................................................................. 28, 35, 47 Relief ..............................................................................................19, 28 Unloader .............................................................................................. 32Weed Roller ...............................................................................................56Wind Meter ................................................................................................ 60ABOUT US .....................................................................................................71
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
3 www.settermfg.comPricing can be found on-line
Features:›› Optional Tank sizes:
25 Gallon cone-bottom Tank, 50 or 90 Gallon Sprayer Tank
›› Jet agitation in Tank›› Hand Wand
Optional Pumps: 12 Volt, Roller, PTO PumpOptional Booms: 12’, 16’ Steel Booms OR
13’, 20’ or 26’ 30’ Poly Booms
3-Point Hitch Models or Trailer Models:›› Optional Tank Sizes:
25 or 66 gallon cone tank, 55 or 90 Gallon Sprayer Tank
›› Optional Pumps: 12 Volt, PTO Roller, Hydraulic or Diaphragm Pump
›› 5.5 Honda Engine with transfer case to pump Optional Booms:
12’ or 20’ , 26’, 30’ Steel Booms OR 13’, 20’ or 26’ Poly BoomsTrailer Models available with TURF Tires
The Little Big Sprayer, Spot SprayersThe Little Big Sprayer (A Combination Spot Sprayer and High Pressure Washer)
SETTER’S Spot Sprayer Features:›› Hypro double piston pump›› Max 3 GPM at 1500 PSI›› 5.5 HP Honda gas engine with OIL ALERT (O.A.)›› 25 Gal. or 55 gal. cone-bottom tank›› Jet agitation in tank›› 12’ Booms with break-a-ways
High Pressure Washer Features:›› Pressure regulator
adjustable from 0—1500 psi›› Liquid Soap Injection systems›› Garden Hose adapter›› Rifle-grip hand wand with
with 30’ hose
›› 3PT Hitch Steel Frame with 50 or 90 Gallon Sprayer Tank ›› Jet Agitation and Full bottom drain bulkhead in tank›› 26’ Poly Booms with break-a-ways. ›› Booms fold in Cross-over position for transport.›› Height Adjustable stainless steel back boom slide›› Pressure regulator and electric On/Off boom controls.›› Quick coupler 540 RPM.›› Torque arm and mounting bracket.
Optional Pumps: Hypro #1700 Ni-Resistant PTO Roller Pump Hypro #9303-HM4 Hydraulic Pump
SETTER’S SPOT SPRAYERS
Setter’s 50 or 90 Gallon 3-Pont Hitch Model
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 4 Phone for current pricing
OPTIONAL BOOMS:›› Reinforced galvanized boom—Silver Section›› Widths: 13’, 20’, 26’ and 30’ complete with a break-a-way ›› Poly Booms: 13’, 20’, 26, 30’Complete with a Break-a-way
Gas Powered Trailer Sprayers›› 55, 75 or 100 US Gallon Poly Tank with Sump›› Honda Engine GX35, 4 stroke, 1.3 HP ›› Hose Reel with 100’ Hose›› Spray Gun Atomizer, Spray distance: 22’ Vert., 30’ Horizontal›› Manual Controls; Pressure Regulator with gauge›› Adjustable Tow Hitch›› High flotation tires to handle tough terrain
Optional Booms can be addedElectric Control Optional
12 Volt and Roller 3-PT Hitch Models›› 55 or 130 U.S. Gallon Tank›› Galvanized 3-PT Hitch Frame›› 12 Volt Motor, Diaphragm Pump, 4 gpm, 60 psi›› PTO Roller Pump available. 8 gpm, 300 psi›› Hand Wand with 15’ coiled hose›› Spray Distance: 27’ Vertical, 35’ Horizonal›› Manual controls with pressure Gauge
Electric controls are optionalOptional Booms can be added
3 PT Hitch Tractor Sprayers
Spray Marshal and SprayMarshal Plus+ SprayersTree Spraying, Spot Spraying
Broadcast Sprayer Fire Fighting
SprayMarshal Sprayer Features:›› Tank sizes: 25, 55, 75 and 100 US gallon›› Heavy duty steel frame›› 100 feet of hose with manual reel›› Adjustable turbo atomiser ›› Spray distance: 22 Vert., 30’ Horiz.›› Piston Pump, 2.9 gpm, 320 psi ›› Pressure Regulator and gauge›› Honda 4 stroke motor›› 3 year warranty›› UV Stabilized Poly Tank
Optional Booms can be added
SprayMarshal PLUS+ Features:›› 60 gallon Tank, no frame›› Space-Saving Compact Design›› Other features same as SprayMarshal›› Dimensions: 36”Lx30”Wx27”H
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
5 www.settermfg.comPricing can be found on-line
ATV PRO SPRAYER›› 25 gallon low profile tank›› Manual bypass regulator, ›› 12 volt deluxe pump›› 15’ Coiled hose and lance›› Boomless nozzle, 180° swath
Optional Booms can be added
50 or 100 US Gallon Sprayer Tank›› Tank has full drain, molded anti-vortex baffles›› Top or Bottom Fill›› 12 Volt Electric Pump, 7gpm, 100 psi OR
Honda Engine with centrifugal pump›› Adjustable swing-away control arm ›› Manual Controls with Master shut-off›› Pressure Regulator with gauge›› Left/Right Shut-off Valves›› Hose Reel with Spray Wand, 30’ hose
Electric Controls are OptionalOptional Booms can be addedAccommodates a boom or boomless spray system, or both together
TRU-KLEEN ATV SKID SPRAYER
ATV GOLD SPRAYER›› Low profile tank, 15, 22, 25 gallon›› 15’ Coiled hose with Hand wand›› 12 Volt pump›› 15 gallon: 27” x 33” x 13”
Optional Booms can be added.
ATV AND UTV SPRAYERS
UTV FIELD BOSS SPRAYERS
Field Boss 365›› 60 OR 100 US gallon Low profile UV, ›› Full drain on tank›› GX120 Honda Engine , 4 stroke›› 22.5 gpm poly centrifugal pump, 57 psi›› Multi-control regulator mounted on swing-arm›› Poly hose reel w/ locking devise, 50’ hose›› Spray gun (27’ Vertical, 35’Horizonal)
Booms are optional
Field Boss XSTREAM ›› Diaphragm Pump, 5.8 gpm, 290 psi›› Spray Distance 37’ vertical, 45’ Horizonal›› 100’ hose on reel
Other features same as Field Boss 365
Field Boss Ecolite›› Diaphragm Pump, 7 gpm, 70 psi
Other features same as Field Boss 365 Optional Booms can be added
Models available: Field Boss 365, Field Boss Xstream, Field Boss Ecolite
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 6 Phone for current pricing
Raven CRUIZER, VIPER PRO and Phoenix Antennas
VIPER PRO›› 10.4” Colour Screen, 800Mhz Intel Celeron M Processor›› 5 Product VRA Control Guidance›› Windows XP embedded operating system›› Interfaces with existing Raven controllers via serial port›› Creates color coverage and applied maps on-the-go›› Use with Liquid, granular and NH control›› Data Log information to internal memory›› Store data in shape file format to use with GIS programs›› 3 USB data transfer ports Input/Output: 2 CANbusOPTIONS:›› Auto steer›› Accuboom section (auto boom shut-off) control›› Green Seeker variable rate control interface›› Auto Boom Height Control›› On-vehicle weather station›› Multi Product VRA available
VIPER 4›› 12.1” LED Backlight Display with touch screen.›› Rugged Alloy Enclosure.›› Horizontal and Vertical Orientation, Swiping Feature.›› Dust Proof through tough environments.›› 4 Camera inputs for monitoring bin levels,or blind spots ›› 2 USB Ports›› CANbus Ports›› An Abundance of storage Capacity.›› Slingshot Ready›› Integrated, Fully scalable GPS receiver.
Part# Description#1-117-0171-112 Viper PRO w/Guidance, Single Product
VRA and GEN I Main Cable**NO GPS—Requires GPS Antenna
Part# Description#1-117-5010-010W Viper 4 w/ GPS -MBA 6 Antenna (NO cables included)#1-117-5010-010C With GS correction unlocked
RAVEN’S VIPER PRO/VIPER 4
Designed to work with equipment ofany brand. It’s a highly advancedfield computer with intuitive controls,improved ease of use and extraordinarydata management capabilities. For your operation, this means increasedefficiency, productivity and profitability.
Part# 1-117-0171-249 - Cruizer II Guidance System w/Helix AntennaPart# 1-115-0171-792 - Boom Sensor Adapter (optional) Cruizer Care 3 year extended warranty (optional)
RAVEN’S ‘CRUIZER’ II›› Field review display to verify coverage and identify skips›› Last pass guidance and contour guidance
program, guides the operator to one swath width from a previously applied area.
›› Built-in DGPS engine and external antenna›› 5.7” color touch screen display›› Auto Steer compatible›› Weather Resistant model available
›› Phoenix 300 GPS Antenna/DGPS Receiver combination›› Dual frequency 10 Hz receiver›› Two bidirectional serial interface ports provided for operation of numerous peripheral devices
With software upgrade, the Phoenix 300 can be used for RTK sub-inch accuracyPart#1-117-071-303—(10Hz, RTK, GS scalable)
Slingshot Field Hub:›› Designed to work with major cellular Networks›› Access Slingshot RTK and GS›› Slingshot remote support›› Serves up high-speed internet on Field Computer
Phoenix 300 and Slingshot Hub RTK›› 10 Hz receiver/antenna
sub-meter receiver capable of utilizing 2 differential correction solutions
›› Sub-meter, single frequency WAAS enabled receiver
Part#117-0171-071 (10 hz, SBAS)
›› Dual-frequency Receiver, GLONASS, GL1DE›› Fully scalable GNSS Smart Antenna›› Upgrade into GS or RTK to enhance
Steering and VRA . Part#1-117-2000-001 (SBAS)
Phoenix 200 Antenna
600S Smart Receiver
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
7 www.settermfg.comPricing can be found on-line
Raven Guidance/SwitchPro/AccuBoomEnvizio Pro II & Envizio Pro XL
›› Envizio Pro II- 6.4” colour touch screen›› Envizio Pro XL – 10.4” Color Touch Screen›› Creates colour coverage and as applied rate maps›› Simple product application report and mapping.›› USB and Ethernet Ports
›› Two product raven CAN interface›› Flow Control - liquid, granular, NH3, direct injection›› Supports standard, fast close and PWM control valves›› Multi product VRA available›› Slingshot Ready
›› AccuBoom automatically turns booms on and off›› Requires a Raven controller with CANbus system›› Envizio Pro or ViperPro series monitor
›› Simplified coverage of point rows, up to 10 sections›› Machine specific Kits - Order by machine model›› Extra cables may be required
AccuBoom - Auto Boom Shutoff
Part # Description1-063-0172-316 AccuBoom Control Node (without remote capable) AccuBoom Kits Order by machine make and model 1-117-0171-284 AccuBoom Control Node w/remote section control capable1-117-0171-224 Single Remote Section Kit (to remotely check nozzles from back of sprayer)
›› SCS440 One Product capability (Liquid and NH3), 3 boom switches›› SCS450 One Product capability (Liquid and NH3), 6 boom switches ›› SCS4400 5 Product capability (Liquid, granular, NH3, direct injection,
7 Boom switches
›› Switch Pro integrates Viper Pro or Envizio Pro ›› Use with 440, 450 and 4400 style cabling›› AccuBoom is built into Switch Pro ›› Automatic 10-section boom control - turns boom
sections on and off to prevent over spraying and skips on point rows and headlands.
›› Single-product liquid or NH3 application control ›› Adjustable boom coverage on no-spray zones›› Product Controller is used in CAN II Products›› CAN II Nodes are required for Product Controller
Part # DescriptionSwitch Pro #1-117-0171-412 Switch Pro/ Envizio Pro II (440/450)w/ MBA-6 AntennaProduct Control CAN GEN II #1-117-5100-001 Product Control GEN II, 16 pin product cable#1-117-5100-002 Product Control GEN II, 37 pin product cable#1-117-5100-003 Product Control GEN II, 22 pin product cable
Switch Pro and Product Control
Part # Description (Power/Interface CABLES NOT INCLUDED)#1-117-5010-009W Envizio Pro II with Guidance, MBA-6 Antenna , WAAS/SBAS#1-117-5010-007 EnvizioPro XL—NO GPS (requires GPS Antenna)#1-117-5010-007V EnvizioPro XL, single VRA enabled , NO GPS (requires a GPS Antenna)
RAVEN SPRAYER CONTROL CONSOLES
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 8 Phone for current pricing
Raven Auto Steer, AutoBoom and Flow Meters
SmarTrax MD›› Uses a mechanical drive unit (MDU) and Gear Drive attached to
steering wheel.›› Easily moved between Machines.›› Kits Contain Control Node, MDU (requires install kit)
›› Requires Raven’s Cruizer II , Envizio Pro or Viper Pro GPS Monitors
›› Additional CAN cabling and terminators may be necessary depending on system configuration.
SmarTrax 3D Hydraulic Auto Steer›› Hydraulic steering allows for hands-free steering at speeds up to
27 mph - minimizing skips and overlaps.›› Faster Line Acquisition and a greater range in correction allows
for “harder” turns when necessary›› Foot-switch steering engagement keeps your hands free
›› Steering disengage the moment you take the wheel›› Configure via LCD and membrane keypad›› SmarTrax works with any GPS receiver ›› Extra cabling may be required›› Order one Controller and one Hydraulic Steering Kit
Part# DescriptionFlowMax221 #1-063-0173-653 Max 221 Flow Meter (uses standard AA batteries)Lithium Battery #1-507-2001-006 Battery for discontinued FlowMax 220FlowMax 110 Assembly #1-063-0171-357 Monitor with 20’ Cable - requires a Flow Meter›› Single Product flow monitor, Batch volume, rate of flow, total and sub-volume measureFlowMax 810 Console #1-063-0171-214 Batch Controller Console - requires a Flow Meter›› Programmable batch size, pre-cutoff setting to ensure accurate volume, optional cable lengths available
Raven Flow Max Flow MetersFlowMax 221:›› Used for Transferring liquids only›› Self contained digital displays flow rate and totals
›› Records three separate total volumes›› Rate of flow displayed in U.S or metric›› Flanged 2”, Max 200 GPM
Auto Boom - Height ControlFour options for Auto Boom Height Control›› Power Glide - utilizes touch down wheels›› Power Glide Plus - same as Power Glide and adds ability to adjust lift and pressure from
the cab›› Ultra Glide - utilizes ultrasonic sensors that measure boom height ›› AutoBoom XT—provides optimal performance in extreme terrain to keep center rack stable
Part # Description SmarTrax Controller GEN I Steering Controller kit Hydraulic Steering Kit Hydraulic Steering Kit GEN I (Machine Specific) SmartTrax Kit CAN Contoller for GEN II ViperPro /EnvizioPro/CruizerII Hydraulic Steering Kit for CAN for GEN II Steering Kit (Machine Specific) Cables, CAN SmartTrax 3D Machine specific
Part # Description 1-117-5030-020 SmarTrax MD Kit 1-117-5030-022 SmarTrax Generic Install Kit(7/8”or 5/8”) 36 Tooth 1-115-4001-085 (required**) Cable Chassis Steering only systems** GEN II 1-115-4001-066 Cable, Cruizer II to Node 1-115-0172-001 Cable, Viper Pro/Envizio Pro Systems
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
9 www.settermfg.comPricing can be found on-line
Raven AccuFlow™ Single, Vortex and AccuFlow HP™ Plus
Part# Description (Must order vapor tubes kit separately)1-117-0171-612 AccuFlow Vortex, Single inlet, Fast Valve 1-117-0171-613 AccuFlow Vortex, Single inlet, Dual Valve1-117-0171-571 AccuFlow HP Plus with Vortex Cooler, Fast Valve (Other models available)
AccuFlow Vortex:›› Vortex Cooler with super cooling technology to
stabilize NH3 as a liquid›› Fast Valve or Dual Valve system›› Capable of up to 8-section shutoff›› Increased capacity and smaller footprint on toolbar
AccuFlow HP Plus:›› Variable speed Pump runs only when needed›› Simply set target rate›› Ideal for faster application speeds and cooler temps›› Control algorithms for high or low end operation›› ISOBUS Compatible
›› Each nozzle is controlled by its own individual pulsing valve›› Individual valve diagnostics monitor each nozzle›› Gives consistent spray pattern as speed changes›› Reduced spray drift›› Accurate droplet size and placement›› Extended range out of each nozzle
›› Adjustable pressure on-the-go, including 2 preset
›› Built on ISOBUS platform which allows it to work with ISO Task Controllers, including Viper 4
Raven HAWKEYE™ NOZZLE CONTROL SYSTEM
OmniRow™›› Advanced hydraulic motor-clutch with integrated RPM sensor
handles population control by row or section plus shutoff›› Variable-rate planting, manual or prescription based by section
or row›› Track up to 4 varieties at once
›› Hand held remote control provides startup diagnostic convenience
›› Turn compensation for proper seed spacing›› Fan pressure control and Bin Level Monitoring
Raven OMNISEED™ and OMNIROW™OmniSeed™›› Advanced hydraulic motor-clutch for each bin to assure
precision with single-section shutoff›› Integrated Run Blockage Monitor (AgTron™)›› Ultrasonic bin level sensors›› Open Lid indicator
›› Remote tank calibration console›› Control multiple granular and liquid products ›› Use with ViperPro and EnvizioPro series
consoles to provide multi-product VRA seeding and section control
›› Direct Injection System for Chemical application›› No pre-mixing or Tank mixing required›› Up to 4 units on one machine›› Positive displacement pump which injects on the pressure
side, closer to boom for faster response›› Low volume capacity of 1-40 oz. per minute›› High volume capacity of 5—200 oz. per minute›› Adjust chemical concentration on-the-go
›› High resolution encoder provides smoother pump control and lock on target rate technology
›› Automatic rinse system›› ISO compatible pump›› Automatic priming feature›› Real-time diagnostics
SIDEKICK PRO™
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 10 Phone for current pricing
Micro-Trak Systems, Inc.
Part# Description 01001 Calc-An-Acre II, Includes console, Installation hardware
Calc-An-Acre II›› Independently monitors the RPM of a Shaft›› 3 independent area counters, 2 hour counters›› Provides improved chemical efficiency and accuracy›› Front panel is lighted and display is backlit ›› Displays ground speed to tenths of mph›› Area per hour and accumulated hours to track productivity,
plan work and schedule maintenance›› Push button run/hold feature to stop area count ›› Width reduction feature maintains accuracy with active boom
sections and partial tillage passages›› Non-volatile memory so settings are retained›› Available in imperial and metric
measurement units›› Optional remote run/hold available ›› Requires a Speed Sensor (magnetic,
radar or GPS)
Part# Description 01170 Flow-Trak II, Includes 3/4” Flowmeter and Flow sensor, mounting hardware
Flow-Trak II›› Provides application rate, flow rate, total flow, speed, Distance,
sub-area and total area per hour functions›› Push-button run/hold switch,›› Out-of-range warning light
›› Optional remote run/hold sensor kitRequires a Speed Sensor
FLOW MATE™›› Displays and records volume of liquid transferred from bulk
tanks for accurate mixing and control›› Instant verification of ground-drive pump settings
›› Show English or Metric units›› Compatible with Low-Flow metersRequires a Flow Meter
Part# Description 01528 VANSCO Radar Ground Speed Sensor, requires a adapter cable to monitor 01531 Magnetic Wheel Speed Sensor Kit (includes 6 wheel magnets)
01425 ASTRO GPS Speed Sensor—with magnetic mount is a replacement for a magnetic or Radar Speed Sensor. Compatible with most monitors
SPEED SENSORS
Part# Description 01501 FM750 GFN ¾” - 2-40 GPM (6-150 lpm), Max 150 PSI 01504 FM750 SS ¾” - 2-40 GPM (6-150 lpm), Max 500 PSI 01505 FM1000 SS 1” - 3.5-70 GPM (13-265 lpm), Max 500 PSI01515 FlowMaster 270 2” Flange - 3.5-70 GPM (13-265 lpm), Max 175 PSI 10899 NH3 Flowmeter (1” SS) for NH3 only13096 Speed/Flow Sensor w/5’ cable
FLOW METERS
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
11 www.settermfg.comPricing can be found on-line
Micro-Trak Systems, Inc.
Part# Description01171 SprayMate II with 3/4” FlowMeter, 1” Servo Valve, installation hardware
Part# Description01866 SprayMate PLUS w/3/4” Flowmeter 750 GFN, 1” Servo Valve, installation hardware (requires Speed Sensor)
SprayMate II and SprayMate PLUSSPRAYERMATE II›› Built in Boom Switches for 3 separate boom sections›› Master control switch, standard›› Built-in capability for future VRA›› Tank counter shows amount remaining in tank›› Push button auto/manual feature for spot treatments›› Records area and volume in 3 independent pairs of counter so
individual jobs can be tracked›› Minimum flow feature to ensure application pattern as ground
speed slows to extremes
›› On-the-go rate adjustment›› Controls electric and hydraulic valves/motors›› Can be used with EPD (electric pump driver)›› Power switch kit allows you to manually turn on/off without
ignition›› Optional flowmeter kits and control valve kits›› Inline/bypass for servo valve›› Flow based control, Liquid or NH3 compatible›› Solenoid and ball valve compatibleSpeed Sensor is required
›› Dual display readout ›› Built-in boom controls for 5 or 7 separate boom sections›› On the go rate adjustment, Out-of-range warning light›› Built-in capability for future VRA›› Records area and volume in 3 independent counters›› Tank counter shows amount remaining in tank›› Inline or bypass for servo valve›› Push button auto/manual feature for spot treatments›› Minimum flow feature to ensure application pattern as ground
speed slow to extremes
›› Liquid and NH3 compatible›› Flow and pressure based control ›› Controls electric and hydraulic valves/motors›› Compatible with radar ground speed sensors›› PWM or Servo Control to accommodate PWM devices›› Adjustable PWM Min. and Max. Pulse Width to prevent motor
stalling or over pressure›› Optional flowmeter kits and control
valve kitsSpeed Sensor is required
Part# Description01882 (#01894) RateKing Plus 5 or 7 sections (Includes 3/4” Flowmeter, 2-40 GPM 150 PSI 1” Servo valve, and installation hardware
Part# Description14928 1” Servo Valve Max 150 PSI (Max)01564 1” FLANGED Servo Valve, 150 PSI (Max)14957 1” HIGH PRESSURE Servo Valve, 300 PSI (Max)00745 3/4” Servo Valve Max 150 PSI14958 NH3 500 Sero Valve (150 psi)
SprayMate PLUS ›› Added features to ensure quick valve response to changes in
vehicle motion ›› Helps minimize under/over application›› Selectable servo drive options: Standard DC servo and PWM
CONTROL
›› Compatible with standard and 3-way section valves. ›› A secure “Supervisor Lock-Out feature to prevent deletion of
calibration figures and data.
RateKing PLUS
Servo Valves
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 12 Phone for current pricing
Micro-Trak Systems, Inc.DUAL RateKing PLUS*
›› Dual Channel Automatic Rate Controller›› Simultaneously control the application of TWO products›› Easy to use, eliminates cab clutter with one unit.›› Controls any combination of liquid, granular or NH3 products›› Records area and volume in 3 independent pairs of counters in
each channel
›› Flow based control, tank counter shows amount remaining in tank for each channel
›› Independent on-the-go rate adj. for each control channel ›› Controls electric and hydraulic valves/motors›› Master hold turns both channels ON and OFF simultaneously
Hydraulic Flow Control Valves
ProPlant*
Part# Description18008 10-Amp standard Electric Motor Driver18108 10-Amp PWM Electric Motor Driver01757 40-Amp Standard Electric Motor Driver01758 40-Amp PWM Electric Motor DriverOptional:17160 Adjustable Pressure Relief
Electric Pump and motor kits Driver (EPD)(EMD)›› Enables all Micro-Trak Rate Controllers to control the rate of
flow by regulating the speed of a 12 Volt Pump›› EPD replaces the electric servo valve and will control most 12V
pumps up to a max of 70 amps.
Part# Description01204 CONSOLE (speed sensor required)01425 Astro 5 Speed Sensor01189 Optional: Wireless RemoteFOR A COMPLETE SySTEM ADD ONE OF THE FOLLOWING:(A) HARNESS01200 Harness Kit for Mounted Single Drive01202 Harness Kit for Mounted Multi Drive01201 Harness Kit for Drawn Single Drive01203 Harness Kit for Drawn Multi Drive
(B) HyDRAULIC PLANTER DRIVE ASSEMBLy4.9 CID # 40 Planter Drive Kit (Primary Drive)3/4” or 7/8”4.9 CID # 40 Planter Drive Kit (Secondary Drive)9.6 CID # 50 Planter Drive Kit (Primary Drive)9.6 CID # 50 Planter Drive Kit (Secondary Drive)(C ) ADD A HyDRAULIC FLOW CONTROL VALVES (SEE BELOW)
›› Automatic seed Rate Controller›› Three pre-set seed rates (programmed by the user)›› On-the-go seed rate adjustment›› VRA seeding capability›› Auto Section Control
›› Wireless Remote Controls makes calibration a one person task›› Less than 3 gallons of hydraulic flow required per planter
section›› As Applied Maps
›› Easy to install, reduces pump wear›› 3000 PSI Max (206 Bar)›› Reduces hydraulic oil volume to a minimum›› Can be used on open, closed or load sense hyd. systems›› Used to control a single or multiple motor applications
›› 12 V control of hydraulic oil flow on:›› Hydraulic driven planters, conveyers›› Spinner applicators›› 5gpm, 10gpm, 15gpm, 35gpm and
20 gpm Hyd. Control Valves available
Part# Description 01899 Console, (INCL. Ch1, Ch2 harness) Speed Sensor is required14928 1” servo valve01505 1” stainless steel flowmeter
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
13 www.settermfg.comPricing can be found on-line
Micro-Trak Systems, Inc.
Part# Description 01144 MT-NH3 Console customized for NH3(*speed sensor NOT included) 14364 20’ Cable required (for in cab) 14365 25’ cable requiredHarnesses for single sections are required for the different auto rate controller monitors
›› Automatic rate controller designed to specifically control anhydrous ammonia
›› Troubleshooting messages “no speed” and “no flow” ›› Built-in capability for future VRA›› Measurements available in Imperial or Metric›› Total NH3 shows total lbs (kg) applied›› Shows the total lbs (kg) or NH3 applied per minute
›› Shows the amount remaining in the tank›› Shows the amount of actual “N” applied per acre›› Keeps count of total acre worked›› Shows distance traveled in feet›› Area/hour show current work area in acre / hour ›› Requires a Speed Sensor
Part # DescriptionMT-NH3KIT Heat Exchanger– Liquifier Jr. NH3 Kit01815 Heat Exchanger– Liquifier Jr. Ultra Low rate NH3 Kit - WIRING Harness EXTRA– FOR ALL KITS -
Multi Sections kits (up to five section shutoff valves can be added-Valves not included)
Available for: Microtrak Monitors; Spraymate II, MT-3405,MT-9000 and MT-3405F II, RateKing Plus
›› Application range of 1000 to 6000 lbs. of NH3/hr›› Stainless steel heat exchanger, flowmeter & control valve›› Includes strainer, On/Off valve, Control Valve, Flow Meter
vapour tubing and installation hardware.›› Alnico magnet in strainer to capture rust particles›› Pre assembled and pressure tested›› Rugged compact design for easy installation
›› Use with Micro-Trak automatic rate control Consoles, MT-HN3II, Spaymate, MT3405II (not for use with FTW Series)›› Ultra low rate NH3 kit available:›› Application rate of 600-2800 lbs/hr. (Dependent upon tank
pressure, temp., plumbing)›› Vapor Tubes are eliminated which allows for lower rates.›› Plumbing panel has been modified
MT-NH3 II
Liquifier Junior
Old Style NH-3500
Part# DescriptionFor MT-NH3 II, SprayMate II, MT-3405FII Liquifier Kit - WIRING Harness EXTRA– FOR ALL KITS -Dual Liquifer MAX:For SprayMate II, 3405FII Dual Liquifer17972 KZ Shut off Valve 1”
›› Application range of 1500 to 9000 lbs. of NH3/hr (depending on tank pressure and plumbing)
›› Straight-through design gives superior performance even in cold weather conditions
›› Stainless steel heat exchanger, Flow Meter On/Off Valve and control valve, Vapor Tubing and installation hardware
›› Alnico magnet in strainer to capture rust particles›› Includes strainer, electric shutoff valve, vapour tubing and
installation hardware›› Pre-assembled and pressure tested›› Use with Micro-Trak automatic rate control console
(except FTW Series)
The Liquifier Kit
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 14 Phone for current pricing
Part# Description 01323 Console, installation hardware (no shaft sensor kit) 01330 Console with 1 shaft sensor kit (45 RPM w/1 magnet*)01331 Console with 2 shaft sensor kits 01332 Console with 3 shaft sensor kits 01333 Console with 4 shaft sensor kits
Part# Description 01334 Console with 5 shaft sensor kits01335 Console with 6 shaft sensor kitsOptional Equipment01544 Bin level sensor kit
Shaft-Trak›› Monitors up to 6 independent shafts at the same time or 3
shafts and up to 3 bin levels›› Immediate notification when shaft RPM drops below 45RPM or
the level in the bin drops below the bin level sensor (*Order Low Rate console for 5 RPM)
›› Audible alarm feature is standard with every unit›› Eliminates un-seeded areas and costly skips›› Save money and time by seeding once›› Magnetic shaft speed sensor, available up to 6 sensor. kits
Safe Guard Liquid Blockage Monitor ›› Instantly Detects and alerts the operator of blockages without
seeing the sensors ›› Audible alarm immediately alerts operator of blockage›› Monitors all run continuously
›› Alerts operator regardless of light condition›› Achieve full benefits of liquid fertilizer application knowing all
rows are applying
Part # Description 01837-04S Blockage kit/4 sensors/3” Leads 01837-04L Blockage Kit/4 Sensor/20”Leads 01837-06S Blockage kit/6 Sensors/3”Leads 01837-06L Blockage Kit/6 Sensors /20”Leads 01837-08S Blockage Kit/8 Sensors/3”Leads
Part # Description 01837-08L Blockage Kit/8 Sensors/20”Leads 01837-12S Blockage Kit/12Sensors/3”Leads 01837-12L Blockage Kit/12Sensors/20”Leads 01837-16S Blockage Kit/16Sensors/3”Leads 01837-16L Blockage Kit/16Sensors/20”Leads
24,36 and 48 Sensors Also Available
›› Automatic rate controller for Granular Spreader Systems›› 3 independent Area and Volume counter pairs that can be used
to record all your totals›› No Flow and No Speed messages to alert operator ›› Displays Bin level so operator always knows how much prod-
uct is remaining›› Bin level set point can be adjusted to alert operator
›› Monitors spinner RPM for accurate spread pattern›› Displays rate of product applied down to one hundredth of a
pound for ultra low rate accuracy›› Automatically stops apron if No Flow is detected and alerts
operator›› Once spreader constant is determined you never need to
change it›› Displays Weight per minute of product being applied
Part# Description 01402 Console, main wiring harness Requires: 01745 Hydraulic Flow Control Valve, PWM, 8gpm Optional01189 Wireless Remote Kit01539 RPM/Shaft Sensor kit
GSC-1000
Micro-Trak Systems, Inc.
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
15 www.settermfg.comPricing can be found on-line
Micro-Trak Systems, Inc.
Part# Description 01375 Includes console, wiring harness, installation hardware 01376 Blockage module kit 01377 1” Blockage sensor kit 01378 1 ¼” Blockage sensor kit Optional Components01382 Bin level module kit 01544 Bin level sensor kit 01381 Fan sensor module kit 14536 Molded shaft adapter kit with 10 magnets 01380 Shaft RPM module 01539 Hall-effect RPM sensor kit 01535 Run/Hold Sensor Kit Speed Sensor Choose magnetic wheel sensor, GPS sensor or Radar (adapter Cable may be required)
›› Monitors up to 256 seed or fertilizer tubes›› Dual alarm, LCD display›› One or more Sensor Connection Modules (SCM’s)›› Up to 16 sensors per module›› Will work with an air seeder or gravity drop system›› Fan or bin modules can be conveniently inserted anywhere in
the module daisy chain
›› Optional Run/Hold Sensor Kit›› Optional Speed Sensor Kit›› Optional SHAFT RPM Module Kit›› Optional FAN RPM Module Kit›› Optional BIN Module Kit
Whirlwind Blockage Monitor
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 16 Phone for current pricing
Banjo Polypropylene Pipe Fittings
Part # MNPTNIP025-SH 1/4” ShortNIP038-SH 3/8” ShortNIP050-SH 1/2’ ShortNIP050-3 1/2”- 3”NIP075-SH 3/4” ShortNIP075-4 3/4” - 4”NIP075-6 3/4” - 6”NIP100-SH 1” ShortNIP100-4 1” - 4”NIP100-6 1” - 6”NIP125-SH 1 ¼” ShortNIP125-4 1 ¼” - 4”NIP125-6 1 ¼” - 6”NIP150-SH 1 ½” ShortNIP150-3 1 ½” - 3”NIP150-4 1 ½” - 4”NIP150-5 1 ½” - 5”NIP150-6 1 ½” - 6”NIP200-SH 2” ShortNIP200-4 2” - 4”NIP200-6 2” - 6”NIP300-SH 3” ShortNIP300-4 3” - 4”NIP300-6 3” - 6”NIP400-SH 4” Short
Nipples
Part # MNPT RN050-038 1/2” X 3/8”RN075-050 3/4” X 1/2”RN100-050 1” X 1/2”RN100-075 1” X 3/4”RN125-075 1 ¼” X 3/4”RN125-100 1 ¼” X 1”RN150-100 1 ½” X 1”RN150-125 1 ½” X 1 ¼”RN200-125 2” X 1 ¼”RN200-150 2” X 1 ½”RN300-200 3” X 2”
Part # MNPT PLUG025 1/4”PLUG038 3/8”PLUG050 1”PLUG075 3/4”PLUG100 1”PLUG125 1 ¼”PLUG150 1 ½”PLUG200 2”PLUG300 3”
Plugs
Part # MNPT x FNPTRB038-025 3/8” x 1/4”RB050-025 1/2” x 1/4”RB050-038 1/2” x 3/8”RB075-018 3/4” x 1/8”RB075-025 3/4” x 1/4”RB075-038 3/4” x 3/8”RB075-050 3/4” x 1/2”RB100-018 1” x 1/8”RB100-025 1” x 1/4”RB100-050 1” x 1/2”RB100-075 1” x 3/4”RB125-038 1¼” x 3/8”RB125-075 1¼” x 3/4”RB125-100 1¼” x 1”RB150-075 1½” x 3/4”RB150-100 1½” x 1”RB150-125 1½” x 1¼”RB200-075 2” x 3/4”RB200-100 2” x 1”RB200-125 2” x 1¼” RB200-150 2” x 1½”RB300-150 3” x 1½”RB300-200 3” x 3”RB400-300 4” x 3”
Reducing Bushing
Part # FNPT TEE025 1/4”TEE038 3/8”TEE050 1/2”TEE075 3/4”TEE100 1”TEE125 1¼”TEE150 1½”TEE200 2”TEE300 3”TEG075 3/4”w/Gauge PortTEG100 1” w/Gauge Port
Tee Fittings
Part # FNPT CAP025 1/4”CAP038 3/8”CAP050 1/2”CAP075 3/4”CAP100 1”CAP125 1 ¼”CAP150 1½”CAP200 2”CAP300 3”
Pipe Caps
Cross FittingsPart# SizeCR025 1/4”CR038 3/8”CR050 1/2”CR075 3/4”CR100 1”CR125 1¼”CR150 1½”CR200 2”
Part # FNPT x MNPTSL025-90 1/4” 90°SL038-90 3/8” 90°SL050-90 1/2” 90°SL075-90 3/4” 90°SL100-90 1” 90°SL125-90 1 ¼” 90°SL150-90 1 ½” 90°SL200-90 2” 90°SL300-90 3” 90°
SL075-45 3/4” 45°SL100-45 1” 45°SL125-45 1 ¼” 45° SL150-45 1 ½” 45°SL200-45 2” 45°
Street Elbow Part # FNPTEL025-90 1/4” EL038-90 3/8” EL050-90 1/2”EL075-90 3/” EL100-90 1” EL125-90 1 ¼” EL150-90 1 ½” EL200-90 2EL300-90 3”EL100-45 1”
Elbow
Part # HB x HBHM025 1/4”HM038 3/8”HM050 1/2”HM075 34”HM100 1”HM125 1¼”HM150 1½”HM200 2”HM300 3”
HBEL100-90 1”
Hose Mender
Part # FPT x HBHBF075 3/4” x 3/4
HBF075-100 3/4” x 1”
HBF100 1” x 1”
Hosebarb Adapter
Part # HB x HB x HBHBT025 1/4”x1/4”x1/4”HBT038 3/8”x3/8”x3/8”HBT050-075 1/2” x 1/2” x 3/4”HBT075-050 3/4” x 3/4” x 1/2”HBT075 3/4” x 3/4” x 3/HBT075-100 3/4” x 3/4” x 1”HBT100-075 1” x 1” x 3/4”HBT100 1” x 1” x 1”HBT200 2” x 2” x 2”HBT300 3” x 3” x 3”
Hosebarb Tee -Barb
Part # HB x HB x MPTHBT100-100 1” x 1” x 1”HBT150-100 1½”x1½”x 1”HBT150-150 1½”
Hosebarb Tee x MPT
Reducing Nipples
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
17 www.settermfg.comPricing can be found on-line
Part # MNPT x F SW SW100 1” x 1” SW150 1 ½” x 1 ½” SW200 2” x 2” SW220 2” x 2” Full Port
Swivel
Banjo Polypropylene Pipe FittingsHosebarb Adapter
Part # MPT x HB HB025 1/4” x 1/4”HB025-038 1/4” x 3/8”HB025-050 1/4” x 1/2”HB038 3/8” x 3/8”HB038-025 3/8” x 1/4”HB038-050 3/8” x 1/2”HB050-025 3/8” x 1/2”HB050-038 1/2” x 3/8”HB050 1/2” x 1/2”HB050-075 1/2” x 3/4”HB075-038 3/4” x 3/8”HB075-050 3/4” x 1/2”HB075-058 3/4” x 5/8”HB075 3/4” x 3/4”HB075-100 3/4” x 1”HB100-075 1” x 3/4”HB100 1” x 1”HB100-125 1” x 1¼”HB125-075 1¼” x 3/4”HB125-100 1¼” x 1”HB125 1¼” x 1¼”HB125-150 1¼” x 1½”HB150-100 1½” x 1”HB150-125 1½” x 1¼”HB150 1½” x 1½” HB150-200 1½” x 2” HB200-150 2” x 1½” HB200 2” x 2” HB300 3” x 3” HB400 4” x 4”
Part # MPT x HBHB025-90 1/4” x 1/4”HB025/038-90 1/4” x 3/8”HB025/050-90 1/4” x 1/2”HB038-90 3/8” x 3/8”HB050/038-90 1/2” x 3/8”HB050-90 1/2” x 1/2”HB050/075-90 1/2 x 3/4”HB075/050-90 3/4” x 1/2”HB075-90 3/4” x 3/4”HB075/100-90 3/4” x 1”HB100/075-90 1” x 3/4”HB100-90 1” x 1”HB100/125-90 1” x 1¼”HB125/100-90 1¼” x 1”HB125-90 1¼” x 1¼”HB125/150-90 1¼” x 1½”HB150/125-90 1½” x 1¼”HB150-90 1”½ x 1½”HB200/150-90 2” x 1½”HB200-90 2” x 2”HB300-90 3” x 3”
90° Hosebarb
Manifold
Part # Inlet x Outlet x GPTM075/050 3/4” x 1/2” x 1/4”
FNPT 8 Station Manifold
Part # FNPT CPLG025 1/4”CPLG038 3/8”CPLG050 1/2”CPLG075 3/4”CPLG100 1”CPLG125 1 ¼”CPLG150 1 ½”CPLG200 2”CPLG300 3”
Reducing CouplingsPart # FNPTRC100-075 1” x 3/4”RC150-100 1 ½” x 1”RC150-125 1 ½” x 1 ¼”RC200-100 2” x 1”RC200-125 2” x 1 ¼”RC200-150 2” x 1 ½”RC300-200 3” x 2”
Couplings
BANJO 2” and 3” Polyproplene Self-Priming Pumps
Ref# Description5,6 Water Seal Assy10 Body O-Ring11 4 or 5 Vane Impeller12 SS Impeller Bolt13 Gasket, Impeller Bolt14 Nut, Hex Impeller15 Volute16 Screw, Volute17 Check Valve18 Body Assembly20,21 O-Ring,Drain Plug
Ref# Description27 Impeller Key28 Slinger All replacement parts
available
Part # Description205PO 2” Pump 5 Vane Impeller 205PB 2” Pump with Bearing Pedestal (3/4” Shaft)
Part # Description300PO 3” Pump (3/4” Shaft required for gas engines)300PB 3” Pump with Bearing Pedestal (3/4” Shaft)
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 18 Phone for current pricing
Banjo Manifold FittingsFlanged Plugs
Part # FlangeM100CPG 1” x 1”M200CPG 2” x 2” Std.M220CPG 2” x 2” FullM300CPG 3” x 3” Full
Part # FlangeM100CPG90 1”x 1”M200CPG90 2”x 2”M200CPG90SH 2”x 2”M220CPG90 2”x 2”M300CPG90 3”x 3”
90° Couplings
Part # Flange x A M100A 1” x 1”M200A 2” x 2”M220A 2” Full x 2”M300A 3” Full x 3”
Flanged Adapter
Part # Flange M200100CPG 2” Std.x 1”
M220100CPG 2”FP x 1”
M220200CPG 2 FP x 2”
M300200CPG 3” x 2” St
M300220CPG 3” x 2” FP
Reducer CouplingsFlanged Couplings
Part # FlangeM100CPG45 1” x 1”
M200CPG45 2” x 2”
M220CPG45 2” x 2” FP
M300CPG45 3” x 3”
45° Flanged Couplings
Part # Flange x GaugeM100PLG 1” M200PLG 2” Standard M220PLG 2” Full M300PLG 3” M100PLG025 1” x ¼” FPTM200PLG018 2” Std. x 1/8” FPTM200PLG025 2” Std. x ¼” FPTM200PLG038 2” Std. x 3/8” FPTM200PLG050 2” Std. x ½” FPTM200PLG075 2” Std. x ¾” FPTM200PLG100 2” Std. x 1” FPTM220PLG075 2” Full x ¾” FPTM300PLG075 3” Std. x ¾” FPTM300PLG100 3” Std. x 1” FPT
Part # Flange x FPTM100CR 1”
M200CR 2” Standard
M220CR 2” FP
M300CR 3”
Flanged Cross
Part # Flange x HB M100075BRB90 1” x 3/4”M100BRB90 1” x 1”M100125BRB90 1” x 1¼”M100150BRB90 1” x 1 ½”M200100BRB90 2” Std. x 1”M200125BRB90 2” Std. x 1¼”M200150BRB90 2” Std. x 1½”M200BRB90 2” Std. x 2”M220150BRB90 2” Full x 1½”M220BRB90 2” Full x 2”M300220BRB90 3” x 2”M300BRB90 3” x 3”
Flanged Hose Barb 90°
Part # FlangeM100TEE 1” x 1”M101TEE 1” x 1” LongM200100TEE 2” Std. x 1”M200TEE 2” x 2” Std.M220100TEE 2”Full x 1” M220200TEE 2”Full x 2”M220TEE 2” x 2” FPM300TEE 3” x 3”
Flanged Tee
Flanged FNPTPart # Flange x FPT M100050FPT 1” x 1/2” M100075FPT 1” x 3/4” M100FPT 1” x 1”M200FPT 2” Std. x 2”M220FPT 2” Full x 2”M300FPT 3” x 3”
Part # Flange x HB M100075BRB 1” x 3/4”M100BRB 1” x 1”M100125BRB 1” x 1¼”M200100BRB 2” Std. x 1”M200125BRB 2” Std. x 1¼”M200150BRB 2” Std. x 1½”M200BRB 2” Std. x 2”M220100BRB 2”Full x 1”M220125BRB 2” Full x1 1¼”M220150BRB 2” Full x 1½”M220BRB 2” Full x 2”M300220BRB 3” x 2”M300BRB 3” x 3”
Flanged HoseBarb
Part # Flange x MPTM100075MPT 1” x 3/4”M100MPT 1” x 1”M100125MPT 1” x 1 ¼”M200125MPT 2” Std, x 1 ¼”M200150MPT 2” Std. x 1 ½”M200MPT 2” Std. x 2”M220MPT 2” Full x 2”M300MPT 3” x 3”
Flanged MNPT
Clamps & Gaskets
Part # DescriptionFC100 100 Clamp FC200 200 Std. Clamp FC220 200 Full Clamp FC300 300 ClampM101G 100 Gasket w/ 150G 200 Std. Gasket
M201G 2” Gasket with Rib
200G 220 Full Gasket M221G 2” FP Gasket w/Rib
300G 300 Gasket M301G 3” w/Rib
›› EPDM gaskets ›› SS worm screw clamp
M220y45 2” Full Port y FlangeM220yG45 2” y w/3/4” gauge portM300y45 3” y Full Port Flange
45° Y Flanged Coupling
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
19 www.settermfg.comPricing can be found on-line
Banjo Strainers
Manifold Strainers and Manifold Sweeps
Part # TypeLS075-G Gasket fits ½”- ¾”LS100-G Gasket fits 1” - 1 ¼”LS150-G Gasket fits 1½”- 2”LS7** Screen fits ½”- ¾”LS1** Screen fits 1” - 1 ¼”LS2** Screen fits 1½”- 2”LS3** Screen fits 3”
›› All replacement parts available›› EPDM gaskets (viton gaskets available)›› Order screens by mesh (**)
“Y” Strainer Replacement Parts
Part # FNPT Size LS050-** 1/2” x 1/2”LS075-** 3/4” x 3/4”LS100-** 1” x 1”LS125-** 1 ¼” x 1 ¼”LS100-80 1” x 1”LS125-80 1 ¼” x 1 ¼”
›› Clean out plug, Max 75 PSI›› Corrosion resistant›› Stainless steel screen›› Order by screen mesh (**) 20,40, 80
½”- 1 ¼” “Y” Strainers›› Corrosion resistant›› Clean out plug›› Max 150 PSI›› Stainless steel screen›› Order by screen mesh (**) 06, 12, 20,
30, 40, 50, 80, 120
Part # FNPT Size LS150-** 1½” x 1½”LS200-** 2” x 2”3” available with : 04,08,12,20,50 Mesh ScreensLSM300-** 3” x 3”
1 ½”- 3” “Y” Strainers
Part # FNPT Size LST075-** ¾” x ¾”LST100-** 1” x 1”
›› Clean out plug›› Max 150 PSI at 70°F›› Stainless steel screen›› Order by screen mesh (**) 16, 30, 50,
80, 100
¾” - 1” “T” Strainers
Part # FNPT Size LST125-** 1 ¼” x 1 ¼”LST150-** 1 ½” x 1 ½”
›› Clean out plug›› Max 150 PSI at 70°F›› Stainless steel screen›› Order by screen mesh (**) 16, 30, 50,
80, 100
1 ¼” - 1 ½” “T” Strainers
Part # Type LST100-G EDPM gasket fits ¾”- 1”LST150-G EDPM gasket fits 1 ¼”- 1½”LST1** Fits ¾”- 1”LST15** Fits 1 ¼”- 1½”
›› All replacement parts available›› EDPM gaskets (viton gaskets available)›› Order screens by mesh (**)
“T” Strainer Replacement Parts
›› Flanged ›› Max 150 PSI›› Stainless steel screen›› Order by screen mesh (**) 12, 20, 30, 50, 80, 120
Part # SizeMLS100-** 1”MLS200-** 2”MLS222-** 2” FPMLS300-** 3”
1”- 1½” “T” Strainers
Part # Size MLST100-** 1”MLST150-** 1½”
LST15** Screen MLST150LST150-G Gasket fits 1½” T
›› Max 150 PSI›› Order by screen mesh (**) 16, 30, 50, 80, 100
›› EPDM gaskets (viton gaskets available)›› Order S.S. screens by mesh (**)
Part # TypeLS1** Screen “y” MLS100LS2** Screen “y” MLS 00LST2**SS Screen “y” MLS222LS3** Screen “y” MLS300Gaskets:LS150-G Gasket fits 2” y LS100-G Gasket fits 1” yMLS220G1 Gasket fits 2” y FP MLS300G Gasket fits 3” y
Strainer, Gaskets & Screens1”, 2”, 3”, “Y” Strainers
›› PolypropyleneViton seals›› Preset pressure spring›› 360° Orientation
Part # Size PSI MPRV100-075 1” x 1” 75MPRV100-100 1” x 1” 100 MPRV100-125 1” x 1” 125 MPRV100-150 1” x 1” 150
Manifold Pressure Relief Valve
Manifold Flange Sweeps
Part # DescriptionM100BRBSWP90 1” Flange x HBM100SWP90 1” x 1” FlangeM200SWP90 2”x 2” FlangeM220200SWP90 2”FP x 2” FlangeM220BRBSWP90 2”FP Flange x HBM220MPTSWP90 2”Flange x MPTM220ASWP90 2”FP x Male Adpt.M220SWP90 2”FP FlangeM300SWP90 3” Flange x FlangeM300ASWP90 3”Flange x M AdptM300BRBSWP90 3”Flange x HBM300MPTSEP90 3”Flange x MPT
›› Direct replacement for 90° Couplings›› Positive Seals›› Quick & easy assembly
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 20 Phone for current pricing
›› Max 125 PSI›› All replacement parts available
Part # Size Valve PortV050 1/2” FullV075 3/4” FullV100 1” StandardV100FP 1” FullV125 1 ¼” StandardV125FP 1 ¼” FullV150 1 ½” FullV200 2” Standard
4 Bolt Ball Valve
Part # PSI Size Valve PortV200FP 150 2” FullV300 100 3” StandardV300FP 100 3” FullV400 75 4” StandardVFMT200FP 2”FP w/M Adpt. (Male coupler x MPT)
›› Self lubricating stem bushings›› Stainless Steel Bolts
6 Bolt Ball Valve
›› Self lubricating stem bushings›› Stainless steel bolts›› Max 150 PSI›› All replacement parts available
4 and 6 Bolt Manifold Ball Valve
Part # Size Bolts Port MV100CF 1” 4 StandardMV200CF 2” 6 StandardMV220CF 2” 4 FullMV300 3” 6 StandardMV300CF 3” 6 Full
›› Max 100 PSI›› Stainless steal bolts›› Order by load (**): Side Load (SL), or
Bottom Load (BL)›› All replacement parts available
Part # SizeV075** 3/4”V100** 1”V125** 1 ¼”V150** 1½”V200** 2”
3 Way Ball Valve
›› Max 100 PSI›› Stainless steal bolts›› Order by load (**): Side Load (SL), or
Bottom Load (BL)›› All replacement parts available
Part # Size Valve PortMV100** 1” Full MV200** 2” Standard MV220** 2” Full MV300BL 3” Full
3 Way Manifold Ball Valve
Electric Valves
Part # SizeUV050FP ½”UV075FP 3/4”UV100FP 1” UV125FP 1 ½”UV150FP 1 ¼”UV200FP 2”
Single Union Ball Valve›› Max 100 PSI at 70°F›› Double o-rings in stem ›› All replacement parts available
On/Off Electric Valves
Part # Size Type Resp. TimeEV100FP 1” x 1” Threaded 3/4 sec.EV125 1 ¼” x 1” Threaded 3/4 sec.EV150 1 ½” x 1 ½” Threaded 1 ¼ sec.EV200 2” x 1 ½” Threaded 1 ¼ sec.EV204FP 2” x 2” Full P Threaded 1 ¼ sec.MEV100CF 1” x 1” Manifold 3/4 sec. MEV200CF 2” x 1 ½ ” Manifold 1 ¼ sec. MEV220CF 2” x 2” Full P Manifold 1 ¼ sec. MEV300CF 3” x 3” Full P Manifold 3 sec.
›› Polypropylene and stainless steel ball›› Max 150 PSI, 12 V DC
›› Displays overall total volume and batch total›› Magnetic style meter, 6 AA batteries›› Self-calibrating meter, Accuracy is 99%
Part# DescriptionMFM100 1” FP Flow Meter (2-110 gpm)MFM220 2” FP Flow Meter (30-300 gpm)MFM300 3” FP Flow Meter (14-670 gpm)
Full-Port Digital Flow Meter
Part # Size x Ball Resp. Time EV075** 3/4” x 1” TH 3/4 sec.EV100** 1” x 1” TH 3/4 sec.EV125** 1¼” x 1” TH 3/4 sec.EV150** 1½” x 1½” TH 1¼ sec.EV200** 2” x 1½” TH 1¼ sec.EV204**FP 2” x 2” TH 1¼ sec.MEV100**CF 1” x 1” M 3/4 sec.MEV200**CF 2” x 1½” M 1¼ sec.MEV220**CF 2” x 2”FP M 1¼ sec.
3-Way Electric Valves›› Max 150 PSI, 12 V DC›› TH is threaded with flanged inlet; M is flanged 3 sides›› Order by load (**): Side (SL), or Bottom (BL)
Part # Description—Stainless SteelV10270 Straight Mtg.Bracket for 1- 1¼”V10271 90° Mtg. Bracket for 1- 1¼”V25270 Straight Mtg. Bracket for 2-3”V25271 90° Mtg. Bracket for 2-3”
Mounting Bracket for Valves
Banjo Polypropylene Valves
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
21 www.settermfg.comPricing can be found on-line
Banjo Cam Lever Couplings
Part # F Coup. X MPT75B1/2 1/2”75B3/4 3/4”100B 1”125B 1¼”150125B 1½” x 1¼”150B 1 ½”200B 2”300B 3”400B 4” w/3 arms
Quick Couplings BPart # M Adp. X FPT75A1/2 1/2” 75A3/4 3/4” 100A 1” 125A 1¼”150125A 1¼” 150A 1 ½” 200A 2” 300A 3” 400A 4” 150A90 1 ½” 90°200A90 2” 90°
Quick Couplings APart # F Coup. X HB 050C 1/2”075C 3/4 ”100C 1”125C 1¼”150125C 1½” x 1¼” 150C 1 ½”200C 2”300C 3”303C 3” with 3 arms400C 4” with 3 arms150C90 1 ½” 90°200C90 2” 90°
Quick Couplings CPart # F Coup. X FPT 050D 1/2”075D 3/4”100D 1”125D 1¼”150125D 1½” x 1¼”150D 1 ½”200D 2”300D 3”400D 4” w/3 arms150D90 1 ½” 90°200D90 2” 90°
Quick Couplings D
Part # M Adp. X HB 050E 1/2”075E 3/4”100E 1”125E 1¼”150125E 1½” x 1¼” 150E 1 ½”200E 2”300E ”400E 4” with 3 arms
Quick Couplings EQuick Couplings Plug
Part # Size 75PL Fits ½”, ¾”100125PL Fits 1”, 1¼”150PL 1 ½”200PL 2”300PL 3”400PL 4” w/3 arms
Part # Size 075CAP Fits ½”, 3/4”100125CAP Fits 1”, 1¼”150CAP 1 ½”200CAP 2”300CAP 3”400CAP 4”
Part # M Adp. X MPT 050F 1/2”075F 3/4”100F 1”125F 1¼”150125F 1½” x 1¼”150F 1 ½”200F 2”300F 3”400F 4” w/3 arms150F90 1 ½” 90° 200F90 2” 90°
Quick Couplings F
Quick Couplings GASKETS available for all sizes
›› Double sided threads›› Gasket EPDM
Part # Size TF050 1/2”TF075 3/4”TF100 1”TF125 1 ¼”TF150 1 ½”TF200 2”TF220 2”TF300 3”
Bulkhead Fittings
Stainless Steel U Bolts
›› Stainless steel bolts
›› EPDM Gasket
Part # Outlet x InletBF075 3/4” x 1/2”BF100 1” x 1 ½”BF125 1 ¼” x 1 ½”BF150 1 ½” x 2”BF200 2” x 2” Std.BF220 2” x 2” FPBF300 3” x 3”
Manifold Bolted Part # Flange x FPTMBF100 1” x 1”MBF200 2” Std. x 2”MBF200 2” FP x 2”MBF220 2” Full x 2”MBF300 3” x 3”
Part # Outlet x InletBF075BD 3/4” x 1”BF100BD 1” x 1”BF125BD 1 ¼” x 1”BF150BD 1 ½” x 1 ½”BF200BD 2” x 2”Std. PBF220BD 2” x 2”Full PBF300BD 3” x 3”
Bottom Drain (BD)Bolted Fitting›› Stainless steel
bolts›› EPDM Gasket
Part # Description UB100 100 SeriesUB202 200 SeriesUB220 220 Series
Poly Siphon TubesPart # SizeST200 2” Siphon
Threaded ANSI FlangesPart # SizeAF100 1”AF150 1 ½”AF200 2”AF300 3”AF400 4”
Part # Size Fits Hose TF100AV 1” 2 ¼” TF125AV 1 ¼” 2 ¼” TF150AV 1 ½” 3” TF200AV 2” 3”VC200 2” Vent CapVC300 3” Vent Cap
Anti Vortex Tank FlangeAnd Vent Cap›› Standard viton type›› Prevents swirl tank
Bolted Flange
›› Polypropylene ›› Stainless steel rings arms and pins ›› 303C & all 4” have 3 Arms
Quick Couplings CAP
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 22 Phone for current pricing
Colour(**) Colour #Black 005Pink 0067Orange 01Green 015Yellow 02Purple 025Blue 03Red 04Brown 05Grey 06
Colour(**) Colour #White 08Light Blue 10Teal 12.5Light Green 15Tan 20Black 25Black 30Black 40Black 50
Combo-Jet Nozzle Colour Chart
Part # Type 40280** (01-04) Tip/Cap 40280** (05-25) Tip/Cap 40286** (015-04) Tip/Cap (110°)40286** (05-08) Tip/Cap (110°)
›› DR8002 average median diameter at 40 PSI: 416 microns
›› Larger, droplet sizes with fewer oversized droplets that are not effective and waste chemicals
›› Available in 80° and 110°›› Ideal for high clearance machines›› Seal O-Ring included›› Order by colour number (**)
Drift Reduction Tip/Caps
Part # Type40270-** (01-08) Tip/Cap40270-**(10-30) Tip/Cap40281-** (01-08) Tip/Cap (110°)40281-** (10) Tip/Cap (110°)
›› Stainless steel insert tip is a permanent part of the cap
›› ER8002 average median diameter at 40 PSI: 224 microns
›› Seal O-Ring included›› Available 80° and 110°›› Order by colour number (**)
Extended Range Tip/Cap
Part # TypeMR80** (005) Tip/CapMR80** (01-05) Tip/CapMR80**(06-50) Tip/CapMR110**(015-04) Tip/CapMR110**(06-10) Tip/Cap
›› MR8002 average median diameter at 40 PSI: 293 microns
›› More droplet size in the 290 micron range for improved chemical efficacy
›› Available in 80° and 110°›› Seal O-Ring included›› Order by colour number (**)
Mid Range Tip/Cap
Part # Type ER80-** (01-08) Nozzle TipER110** (01-08) Nozzle Tip
›› Poly with stainless insert›› Available 80° and 110°›› Order by colour number (**)
Conventional ER Nozzle
Combo-Jet Fertilizer CapsPart # Description 40249 50 Mesh Slotted Strainer40285-**(005-0067) Pre Orifice (by colour **)40285-**(01-50) Pre Orifice (by colour **)40432-047 2 Orifice Cap at 0.046940432-086 2 Orifice Cap at 0.08640432-104 2 Orifice Cap at 0.10440433-047 3 Orifice Cap at 0.046940433-067 3 Orifice Cap at 0.067
›› Order by Color(**)01 - Red02 - White03 - Green
04 - Yellow05 - Black
Combo-Jet Nozzle Caps›› For Combo-Jet holders›› For Conventional Twist-lock
Part #40269-** For Combo-Jet 40260 O-ring Seal
40159** For Conventional (TeeJet)Twist Lock holder
40160 Gasket
Conversion Adapters
Part # Adpater 40200 FROM TeeJet TO Combo-Jet40203 FROM Combo-Jet TO TeeJet40202 FROM Hardi TO Combo-Jet
›› Includes seal (use with wet or dry body)
Combo-Jet Tip/Caps
Part # Mesh Strainer for Combo-Jet40250 50 (snap-in)40251 10040260 Seal
Strainer for Conventional40250 50 Mesh40251 100 Mesh
Nozzle Strainers
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
23 www.settermfg.comPricing can be found on-line
Combo-Jet Wet/Dry Nozzle Body
›› Combo-Jet Radialock end›› Comes with Diaphragm
Wet Boom Nozzle Body
Part # Type Pipe40254 Single 3/4”40256 Single 1”40255 Double 3/4”40257 Double 1”40266 Triple 3/4”40267 Triple 1”
›› Conventional twist lock end›› Comes with Diaphragm
›› Combo-Jet radialock end›› Square mount style›› 3/8” FNPT inlet (use HB adapter)
Part # Type (with diaphragm) 40352 Single 40353 Double 40354 Triple
40155-07 Diaphragm
40155-08 Cap, diaphragm
›› With 3/8” MNPT›› Use with dry boom nozzle body for
Combo-Jet radialock end
Hose Barb Adapter
Part # Type HB40301 1-way 3/8”40302 2-way 3/8”40306 1-way 1/2”40307 2-way 1/2”40311 1-way 3/4”40312 2-way 3/4”40313 3-way 3/4”
›› Conventional twist lock end (TeeJet)›› Square mount style›› Comes with diaphragm›› Use Hose barb adapter
Dry Boom Nozzle Body
Part # Type 40152 Double 40153 Triple
Dry Boom Nozzle Body
*Square Mounted High Reach
*
Dry Boom Clamps
Part # Type Size40320 round 1/2”40321 round 3/4”40322 round 1”40325 square 3/4”40326 square 1”
Part # Type Size40327 square 1¼”40328 square 1½”40330 square 2”40341 square ¾”-1¼”40342 square 1½”-2”
Part # Convert To Type40470 Combo-Jet Double40471 Combo-Jet Triple40472 TeeJet Double40473 TeeJet Triple
›› Convert single body to multiple head
Adapter Body
WILGER “QUICK-NUT™ FLUID SUPPLY BOOM SYSTEMSTAINLESS STEEL BOOM TUBE - Rigid AND LIGHT WEIGHT .
›› Thin wall Stainless Boom Tube›› Larger inside diameter for high flow rates›› 1.315” outside diameter, same as standard 1” pipe›› Accommodates 1” nozzle bodies›› Wide range of lengths and hole spacings available›› Order tubes from 2 holes to 12 holes
›› Boom tube sections are ready to assemble,›› Formed ends and punched nozzle body inlet holes ›› Significantly reduces boom weight›› O-Ring sealed fittings easy to assembly by hand
Wet Boom Nozzle Body
Part # Type Pipe40154 Single 3/4”40156 Single 1”40155 Double 3/4”40157 Double 1”40166 Triple 3/4”40167 Triple 1”
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 24 Phone for current pricing
John Blue Electronic Liquid Monitor
Combo-Jet Spray Monitor›› Each flow indicator supplies up to 3 nozzle tips›› In operation the indicator ball will hover at the same level›› A ball lower then the others indicates a plugged tip
Part # Description CJFlow Complete 4 Bank Assembly20460-00 Flow Indicator Assembly, includes body, 2
locking clips,1 O-ring, 4 indicator balls 20460-01 Flow Indicator Body 20460-04 Locking Clip 20460-02 Ball Retainer 20460-03 O-Ring for Body and Fittings 20501 (2)(3) 3/8”, 1/2”, 3/4” Straight Fitting 20511(12) 3/8”, 1/2” Elbow 90° 20513-00 3/4” Elbow 90° 20520-00 90° Elbow 20521-00 Cap
Part # Description 20522-00 Tee Flow Indicator Balls: (US gpm)20460-08 Green Poly .05 to .18 gpm20460-07 Red Plastic .09 to .30 gpm20460-06 Maroon Glass .31 to .72 gpm20460-05 1/2” SS .40 to 1.33 gpm20460-10 7/16” SS1.00 to 2.70 gpm
Hypro Boom Express Nozzle Body End Caps›› Conventional booms trap air in boom, causing a delay from the close signal to when spray actually stops. ›› The Express Nozzle Body end cap enables standard bodies diaphragm checks to have as much as a 85% quicker reaction time,
turning off spray quickly and decisively. The removable end plug allows easy cleanout to flush booms.›› Optional Retrofit Kit includes: drill bit, drilling & cutting Jig for 1” pipe, emery cloth and instructions to retrofit wet boom
Express End Cap Part# Retrofit Kit Part# BG-7433-3316 3410-0039
Retrofit Kit
›› Uses magnetic sensing technology mounted behind VisaGage II Flow Monitors (see diagram)
›› Sensors can be mounted to existing VisaGage II units›› Magnetic Balls are supplied with sensors.›› Identifies where magnetic balls are floating in each row ›› Standard (wired) Monitor shows both low-flow and no-flow›› Visual display and audible alarm on control panel in cab›› Each row with a distribution problem will be highlighted by a
flashing LED light at the row to show blocked row.
›› Preimum Wireless Monitor available (iPad2 or newer display running ios 6 or higher is required).
Flow Indicators and Hypro Express End Cap
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
25 www.settermfg.comPricing can be found on-line
Hypro Booms, Nozzle Bodies, and Tips
Part GA-110-**
Guardian AIR Spray Tips›› Air Induction Spray Tips reduce drift,
& provides better coverage with more drops/gallon
›› Rear-ward spray incline provides more uniform coverage @10gpm
›› Each tip is marked with an Arrow indicating direction of travel
›› Order by Size**- 015, 02, 025, 03, 035, 04, 05
›› Flat fan polyacetal tip›› Available in 80° &110°
Part#30-01F**
Flat Fan Spray Nozzle01 Orange015 Green02 Yellow25 Purple
03 Blue 35 Red/Brown04 Red05 Brown
06 Grey08 White10 L.Blue15 L.Green
Hypro Nozzle Color Chart
Part # Outlets Pipe4221N-B124 1 1”4243N-B324 3 1”4243N-B524 5 1’
Part# Barb Size 4242N-B323S Single 3/4”4242N-B323D Double 3/4”4242N-B323T Triple 3/4”
›› Caps/gaskets sold separately›› EPDM 8psi Diaphragm check valve ›› Optional 4, 12, 20, 25 psi checks available›› Three Turret styles available›› 1/2”, 3/4” available on request
›› Vari-Spacing Clamps required for dry boom›› 1/2” available on request›› Single, double, Triple barbs
Hypro Nozzle Bodies for Wet and Dry Booms
Hypro Express Boom Assembly›› Single section Custom Booms›› Standard configuraton 1” Sch 5 Stainless Steel Pipe›› 20” spacing
›› Express fittings, 5-Way ProFlo Nozzle w/8psi DCV›› Flexibility to meet any boom design›› Tested as a complete assembly
Part# Description2410-0027 2 x 2 (other sizes available)
Hypro XT Boom X Tender - Boomless Tips
Part # GPM ColourStainless Steel Body w/MPTXT010 0.9-1.2 GreenXT020 1.7-2.4 BlueXT024 2.1-2.9 yellowXT043 3.7-5.3 OrangeXT080 6.9-9.8 RedXT167 14.5-20.5 WhiteXT215 18.6-26.3 GreyFast Cap ModelFC-XT020 1.7-2.4 Blue FC-XT024 2.1-2.9 yellowFC-XT043 3.7-5.3 Orange
›› XT delivers a uniform spray pattern up to 20 feet›› Ideal for weed control in fence rows, pasture land, turf and golf
courses›› Maintains a spray swath of 16-20 feet over a pressure range of
30-60 PSI
›› Large droplet size reduces spray drift and promotes crop penetration
›› Off-center, flat fan spray pattern of 110°
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 26 Phone for current pricing
Twist Lock Nozzle Body›› Automatic tip alignment›› Max 300 PSI›› Boom hole 3/8”
Part # Pipe Size QJ7421-1/2 1/2”QJ7421-3/4 3/4”QJ7421-1 1”
Side Mount Nozzle Body›› Automatic tip alignment›› Diaphragm check valve›› Max 300 PSI
Part # Size QJ8355 1/8” FPT QJ8355 1/4” FPT
Twist Lock Nozzle Body
›› Automatic tip alignment›› Diaphragm check valve›› Max 300 PSI›› Boom hole 3/8”
Part # Size QJ8360-1/4 1/4” MPT
QJ360 SeriesNozzle Body- 3 Outlet›› Purchase caps and gaskets separately›› Diaphragm check valve
Part # Pipe Size QJ363C-3/4 3/4”QJ363C-1 1”
QJ 360 SeriesNozzle Body- 5 Outlet›› Purchase caps and gaskets separately›› Diaphragm check valve
Part # Pipe Size QJ365C-3/4 3/4”QJ365C-1 1”
QJ 360 SeriesNozzle Body- 4 Outlet
Part # Pipe Size QJ364C-3/4 3/4”QJ364C-1 1”
›› Purchase caps and gaskets separately›› Diaphragm check valve
Twist Lock Triple Jet›› Shut off position provided›› Automatic tip alignment›› 3 Nozzle swivel head›› Diaphragm check valve›› Max 150 PSI›› Boom hole 3/8”
Part # Pipe Size 24216A-1/2 1/2” 24216A-3/4 3/4” 24216A-1 1”
Side Mount Nozzle Body›› Prevents body damage›› Minimizes nozzle clogging›› Automatic tip alignment›› Diaphragm check valve›› Max 300 PSI
Part # Pipe Size QJ22787-1/2 1/2”QJ22787-3/4 3/4”QJ22787-1 1”
Retrofit Nozzle Body›› Threads and twist-lock to fit TeeJet
system›› Automatic tip alignment›› Max 300 PSI
Part # SizeQJT-11/16 11/16” FNTQJ1/4T 1/4” FPTQJ1/4TT 1/4” MPT45° Nozzle Body:Part#22674 1/4”MPT
Retrofit Nozzle Body
›› Threads to TeeJet system›› Automatic tip alignment›› Diaphragm check valve›› Max 300 PSI
Part # SizeQJT8360 11/16” FNT
Single Nozzle Body›› Automatic tip alignment›› Diaphragm check valve›› Max 300 PSI›› Boom hole 3/8”
Part # Pipe Size QJ17560A-1/2 1/2”QJ17560A-3/4 3/4”QJ17560A-1 1”
Wet Boom Nozzle Body›› Mounts on 5/16” hole›› Max 150 PSI›› 11/16” Nozzle thread
Part # Pipe Size 257751/2TNyB 1/2”257753/4TNyB 3/4”257751TNyB 1”
TeeJet Nozzle Systems for Wet Booms
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
27 www.settermfg.comPricing can be found on-line
Nozzle Body - 3 Outlet›› Diaphragm check valve›› Caps and gaskets sold separately›› Order by HB (*) single (1) or double (2)
Part # SizeQJ363500* 1/2”QJ363750* 3/4”QJ3631000* 1”
Nozzle Body - 5 Outlet›› Diaphragm check valve›› Caps and gaskets sold separately›› Order by HB (*) single (1) or double (2)
Part # SizeQJ365500* 1/2”QJ365750* 3/4”QJ3651000* 1”
Triple Nozzle Body›› Three nozzles swivel head›› Automatic tip alignment›› Diaphragm check valve›› Max 125 PSI›› Caps and gaskets sold separately›› Order by HB (*): single (1), double (2) or
Triple (3)
Part # Size24230-1/2-* 1/2”24230-3/4-* 3/4”24230-1-* 1”
Single Nozzle Body›› Automatic tip alignment›› Diaphragm check valve›› Max 300 PSI›› Caps and gaskets sold separately›› Order by HB size * (3/8”, 1/2”, 3/4”)
Part # HB19349-* 119350-* 219351-* 3
Nozzle Body›› Automatic tip alignment›› Caps and gaskets sold separately›› Max 125 PSI
Part # Size HB18635-3/8 3/8” 118638-1/2 1/2” 118719-3/4 3/4” 118636-3/8 1/2” 218639-1/2 3/8” 218720-3/4 3/4” 218637-3/8 3/8” 318640-1/2 1/2” 318721-3/4 3/4” 3
Triple Nozzle Body
›› Low profile design›› Automatic tip alignment›› Diaphragm check valve›› Max 300 PSI›› Caps and gaskets sold separately›› Order by HB: (*): single (1) or double (2)
Part # SizeQJ3003/8”-1 or (2) 3/8”QJ3001/2- 1 or (2) 1/2”QJ3003/4”-1 or (2) 3/4”
Nozzle Body - 4 Outlet›› Diaphragm check valve›› Caps and gaskets sold separately›› Order by HB (*) single (1) or double (2)
Part # SizeQJ364500* 1/2”QJ364750* 3/4”QJ3641000* 1”
Nylon Nozzle Body
Part # Size 12094NyB 1/4” FNPT8028NyB 1/4” MNPT
ChemSaver Cap Assembly
Part # Description 21950 ChemSaver Cap 10PSI21953 Diaphragm
Spray Tip Plug
Part # Type CP3942 Brass Rapid fit and Ezi-fit nozzle
body parts are available by special order
TeeJet Nozzle Systems for Dry Booms and Accessories
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 28 Phone for current pricing
›› TeeJet Ball Check Strainer›› Minimizes dripping›› Ball check opens at 5 PSI
Part # Use WithCP25611**Ny Flat Spray Tips, Turbo TeeJet Tips
CP25597**Ny TwinJet Tips, Air Induction Tips
CP25595**Ny Fat Spray Tips (position parallel or perpendicular)
CP25599**Ny FloodJet, Turbo FloodJet
CP25607**Ny FlodJet, FullJet, ConeJet, Full Cone
CP262771Ny Ceramic disc core
QJ46761/8NyR Standard 1/8” MPT nozzles, gasket included
QJ46761/4NyR Standard 1/4” MPT nozzles , gasket included
QJ4676451/4Ny 45° quick TeeJet cap with 1/4” FPT
QJ4676901/4Ny 90° Quick TeeJet cap with 1/4” FPT
QJ19843NyR Shutoff cap with gasket
19438EPR Gasket
›› Nylon Construction, Max PSI 300›› Order by colour and number (**)
TeeJet Caps and Gasket*
* Nozzles not included with cap price
›› Diaphragm operation›› Stainless steel springs›› 1/2” Models Max 56 GPM›› 3/4” Models Max 70 GPM›› Order by size ** (1/2” or 3/4”)
Diaphragm Relief Valve
Part # PSI8460-**-300 3008460-**-50 50AB-8460 Repair Kit
›› Max 300 PSI›› 1” Inlet and 3/4” Outlet
Aluminum Selector Valve
Part # Description17y Valve AB17 Repair Kit
›› Fiberglass reinforced body›› Max 100 PSI›› 15 GPM›› 1” Inlet and Outlet›› 2.9 Amp draw
145 Series Valve
Part # Description 145H1 Valve AB145H Repair Kit
›› Poly body with EPDM diaphragm›› Replace coil without valve removal›› Max 100 PSI›› 10 GPM›› 2.5 Amp draw›› 3/4” Inlet and 1/2” Outlet
144A Series Valves
Part # Description 144-A1 Valve
AB144A1 Repair Kit
›› Max 100 PSI›› 28 GPM›› 3/4” Inlet and Outlet›› 0.15 amp draw›› 2 wire lead for 12 V
244 Regulator
Part # Description 244C-3/4 Regulator
›› Max 150 PSI›› 12.5 GPM at 5 PSI pressure drop›› 1/4” FPT Gauge port
Manual Control Valve
Part # Inlet Boom AA6B 3/4” FPT 1/2” FPT
Colour # (**)Black 1White 2Red 3Blue 4
Colour # (**)Green 5yellow 6Brown 7Orange 8
Caps Colour Chart
TeeJet Screens
Part # Mesh Colour 4193APP50 50 Red 4193PP100 100 Green
Stainless Steel Screens8079PP50 50 Red 8079PP100 100 Green 8079PP200 200 Orange
Slotted Strainers (fertilizer)4514-50 50 Red
1 2 3 4 5 6 7 8
TeeJet Caps, Screens and Valves
TeeJet Valves
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
29 www.settermfg.comPricing can be found on-line
TeeJet Visiflo Spray Tips and Nozzles
›› Produces 2 wide angle, flat spray patterns›› 30° forward-tilted spray penetrates crop
canopies, 70° back-ward tilted spray maximizes coverage of crop seed head
›› Removable pre-orifice for easy cleaning›› Drift resistant drops via venturi air
aspirator
TeeJet Broadcast Nozzles
Part # Type TP30700**AIVP Acetal 98579-1-NyR Cap & Gasket
›› 30-60 PSI›› See TeeJet chart for capacity ( 01- 16)
Part # Type OC**SS Stainless Steel OC**B Brass
Off Centre Nozzles
Colour Colour #Orange 01Tan 0134Green 015yellow 02Purple 025Blue 03Red 04
Colour Colour #Brown 05Grey 06White 08Light Blue 10Light Green 15
›› 15-90 PSI›› Available in 110°›› Order by tip degree and colour (**)
Turbo TeeJet Tips
Part # Type TT110**VP Turbo Tip
Part # Type TTJ60-110**VP TWIN Tip
Available in 80° and 110°Order by tip degree and colour (**)
TwinJet Tips
Part # Type TJ6080**VS Stainless Steel TJ60110**VS Stainless Steel
›› 30-300 PSI (Non-stock Item)›› Order by colour (**)
ConeJet Tips
Part # Type TXVS** ConeJet
›› 30-100 PSI›› Colour coded with stainless steel insert›› Available in 110°›› Order by colour (**) number
›› Dual 110º flat fan pattern›› Excellent drift control›› Coarse to very coarse droplets›› Pressure ranges from 20-90 PSI
Air Induction Nozzles
Air Induction Turbo TwinJet Nozzles
Part # Type AI110** Air Induction
Part # Type AITTJ60-1100** Air Turbo Twin
Part # Type SJ3-**VP StreamJet
›› Extended Range 15-60 PSI›› Standard and Drift Guard 30-60PSI›› Visflo (poly with Stainless insert)›› Available in 80° and 110°›› Order by tip degree and colour (**)›› (Brass can be special ordered )
Flat Spray Tips
Part # Type VS80** Standard Range VS110** Standard Range
DG80** Drift Guard DG110** Drift Guard
XR80** Extended Range XR110** Extended Range
TeeJet Row Application Kit
Part # 23770
›› Nylon or stainless steel arms, Max 125PSI›› Arms adjustable for length and angle ›› Fits round or square booms 1½” ›› Spray tips and strainers not included›› includes nozzle bodies
›› 3 Streams from each nozzle›› Order by colour size(**)
StreamJet Fertilizer Tips
Larger nozzles by special order
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 30 Phone for current pricing
Boomless Nozzles, TeeJet Swivel Nozzle Body and Clamps
›› Two off centre tips, 3-VeeJet nozzles›› Brass body and tips›› 3/4” FPT, 1/4” Gauge port›› Order high capacity OC Size (**)›› Nozzles extra #10, #20, #40
Part # 5880-3/4-2TOC**
›› Brass body ›› 3/4” FPT, 3/4” Nozzle Port›› Uses High OC Nozzles #10,#20,#40›› OC Nozzle extra—order by Size (**)
Part # 4629-3/4-TOC**4303-40 High Capacity OC
BoomJet Nozzle* Single Swivel Nozzles*›› Brass body and tips›› 3/4” FPT. 3/4” Nozzle Port›› Uses High OC Nozzle #10,#20,#40›› OC Nozzle extra– Order by Size (**)
Part # 4418-3/4-2TOC** 4303-**High Capacity OC
Double Swivel Nozzles*
Quick TeeJet Threaded Swivel Nozzle Body›› 360° Swivel, Max 125 PSI›› Accepts 11/16” thread cap›› 1/4” FPT
Part # TypeQJ8600-1T SingleQJ8600-2T Double
Quick TeeJet Twist Lock Swivel Nozzle Body›› 360° Swivel, Max 125 PSI›› Accepts twist lock cap›› 1/4” FPT
Part # Type QJ8600-1 Single QJ8600-2 Double
Clamp - RoundPart # Fits (Pipe) AA111-1/2 1/2” AA111-3/4 3/4” AA111-1 1” AA111-1 1/4 1 ¼”
Part # Fits (Pipe) QJ111-1/2 1/2” QJ111-3/4 3/4” QJ111-1 1” QJ111-1 1/4 1 ¼”
Vari-Spacing Clamps - Round
Clamp - SquarePart # Fits (Pipe) AA111SQ-1 1” AA111SQ-1 1/4 1 ¼” AA111SQ-1 1/2 1 ½”
Vari-Spacing Clamps - SquarePart # Fits (Pipe) QJ111SQ-3/4 3/4” QJ111SQ-1 1” QJ111SQ-1 1/4 1 ¼” QJ111SQ-1 1/2 1 ½”
Hose barb Nozzle Body›› Includes locknut›› Available in Nylon or Poly (P)
Part # HB Sizes 8121-** L 3/8”,1/2”,5/8”, 3/4”, 1”8120-** T 3/8”,1/2” 5/8”, 3/4”, 1”8122-** I 3/8”, 1/2” 8123-** + 3/8”, 1/2”, 3/4”
Nozzle Cap and LocknutPart # Type 8027Ny (cap) Nylon or Poly 5823 (lock nut) Nylon or Poly
›› Adjustable spray swath when used with single or double TeeJet swivels nozzle bodies
›› Available in stainless steel by special order›› Mount at 45° angle to spray one side›› Up to 12’ coverage on one side›› Max coverage when mounted at 36” height›› See TeeJet chart for ratesOrder by size (**) 10, 20, 40, 80, 150, 300
3/4” TeeJet Off Centre Nozzles
Part # Type6733-OC** Brass
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
31 www.settermfg.comPricing can be found on-line
Spray GunsTeeJet TriggerJet Spray Gun with Trigger Handle›› Adjustable ConeJet spray tip›› 1/4” FNPT Connection›› Max 150 PSI›› Line Filter in handle
Part # Size 22670PP15 15” 22670PP24 24 2266315 15” wand 2266324 24” wand 22650PP1/4 Handle
Telescoping Light Duty Spray Gun›› Adjust from 32” to 51”›› Nozzle adjusts from fan spray to
straight stream›› Polypropylene handle and›› aluminum wand›› 3/8” HB connection ›› Max 150 PSI
Part # Description Wand500 32”
GunJet Spray GunNo. AA2›› Max 800 PSI›› Max throw; Vert. throw 14’; Horz. 62’›› 24” Long with 3/4” FGHT Port›› Rotate Handle 360° to open or close›› Wide cone to narrow stream spray›› Available in Brass on special order›› Orifice Disk (# 60) included›› Other orifice sizes are available
Part # Type AA2-AL Aluminum
Tree GunTree and Industrial›› High pressure spraying of trees, bushes
and hedges›› Change nozzle patterns from straight to
cone stream by side mounted trigger ›› 1.5 mm ceramic nozzle›› Max 750 PSI; Max 8 GPM
Part # Port 506400 1/2” MPT
Tree GunLong Range›› Adjustable nozzle patterns from
straight to cone stream›› 3-4 mm ceramic nozzle›› 1200psi;max 25-30gpm›› Max throw 77 ft›› Stainless steel and brass
Part # Port3381-0010 25(3mm)3381-0011 29(4mm)
Liquid Fertilizer Gun›› Trigger Lock›› 45° Showerhead cone spray pattern›› Max 200 PSI›› At Max 20 PSI, Nozzle Flow: Grey - 4 GPM;
Black - 5.6 GPM ; Red - 6.4 GPM
Part # Description 25660 Gun 257601.5 Grey Nozzle 257603.0 Black Nozzle 257604.0 Red Nozzle 25990 Swivel ¾” x ½” HB
GunJet Spray GunNo. AA143›› Max 800 PSI›› Max throw; Vert. throw 12’; Horz. 54’›› 22 ¼” Long with FGHT Port›› Rotate Handle 360° to open or close›› Wide cone to narrow stream spray›› Orifice Disk ( # D6) included›› Other orifice sizes are available
Part # Type 143ALGH AluminumAA18-AL 3/4” NPT
Repair Kits - for TeeJet Wand
Part # Type AB143AL Repair Kit AB25660 Repair Kit 38700KIT Repair Kit 133025 Repair Kit For Long RangeTree Gun
Repair Kits - for TeeJet Wand
Part # Type 22650PPKIT Handle
Spray Gun›› Use on backpack, canister, ATV or
estate sprayers›› Poly Handle and Aluminum wand›› Adjustable ConeJet spray tip›› Order by HB connection 1/4” or 3/8” (*)›› Max 100 PSI
Part # Size 50800PP* 15” 50800-AL* 21”
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 32 Phone for current pricing
Hydraulic Pressure Washers and AccessoriesHypro Unloader Valve›› 200- 1500 PSI›› Max 8 GPM›› 3/8” MNPT›› Buna-N cup, 200°F
Part # PSI 3390-0063D 200-600 3390-0067D 400-1000 3390-0072D 800-1500
Hypro Adjustable Liquid Injector›› 1/8” (F) NPT inlet port›› Quality brass/stainless steel injector
assembly›› Available for 220 and 2300 series
pumps
Part # 3396-0011D
Hypro Unloader Valve›› 3000 Max PSI›› Max 8 GPM›› 3/8” (M) NPT inlet›› 1/2” (M) NPT inlet
Part # PSI 3390-0083 3000
Hypro Unloader/ Bypass System
Part # PSI 8000-007 400-1000 8000-008 800-1500
›› 3 Ports›› Max 5 GPM›› 1/2” (F) NPT inlet›› 3/8” (M) NPT outlet›› Adjustable knob›› Max Temp: 93.3°C
Hypro Unloader/ Bypass System
Part # PSI GPM 3390-0104/3A 2600 2.0-3.2 3390-0104/3B 2600 3.2-4.0 3390-0105 3200 8.0
›› 2 Ports›› 1/2” (F) NPT inlet›› 3/8” (M) NPT outlet›› Adjustable knob›› Max Temp: 93.3°C
Hypro Pulse Hose for Pressure Washer
Part # End 3375008 3/8”(M) 33750012 Plugged
›› Max 1500 PSI›› 3/8” (F) NPT›› 24”Special Hi flex hose
Hypro Hi/Lo Fan Nozzle
Part # Noz. # MAX GPM3324-2001.3 1.3 1.85-3.96 3324-2001.35 1.35 19.7-4.23
›› Max Temp: 148.9oC›› Max 3000 PSI›› 1/4” (F) NPT inlet›› Variable fan pattern 0 -80°C›› Push/pull for pressure adjustment›› Twist for fan adjustment
Hypro Hydraulically-Driven Pressure Washers›› Trigger spray gun›› Adjustable unloader›› Pressure gauge›› Hi/Lo Adjustable spay pattern›› 3/8” Quick disconnect Outlet, 50ft of hose›› Forged brass head with triplex pump
Part # Chem. Max Max Inlet Hyd. Motor Req: Injec. GPM PSI Port GPM PSI1802C No 3 1000 1/2”NPT 5.0 1300 1804C No 3 1500 3/4”GH 8.00 1900 1806C yes 3 2000 3/8”GH 11.00 1300
Hypro Pressure Washer Gun
Part # Description 3381-0034 Spray gun with 16” black lance and coupler 3365-007-14 14” Zinc-Plated lance extension with coupler 3365-0007/24 24” Zinc-Plated lance extension with coupler
›› Rear entry›› Max 7 GPM, 3500 PSI›› Nozzle not included›› Max Temp 148.9°C
›› Stainless steal ball/seat›› Safety lock›› Light weight
Part # Range GPM Size 6178 45’ 15.2-22 3/4” FGHT6178G Gasket6180 58’ 51-66 1/2” FPT6180G Gasket6183 High Volume 100 2” FPT6183G Gasket
›› Can connect to any centrifugal pumps›› Polycarbonate -rubber bumper›› PSI Range 50-100
High Volume Cleaning Nozzles
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
33 www.settermfg.comPricing can be found on-line
Air Bubble Jet Nozzles, Twin Caps, CP Nozzles and Dribble Band BarAir Bubble Jet Nozzles
›› Reduced number of very small droplets›› Creates air bubbles in larger droplets that collapses on contact with leaf
and liquid disperses evenly—reducing driftHow Air Bubble Jets Work›› Liquid passes through a removable tapered nozzle A which accelerates
the liquid and projects the flow into the tapered mouth of venturi B›› This creates a vacuum which causes air to be sucked in through two
slots C›› The mixture of air and liquid is compressed as it passes through the
mixing chamber D and is then sprayed through a fan nozzle E.
Colour Chart **
Orange 0.1Green 0.15yellow 0.2Purple 0.25
Blue 0.3Red/Brown 0.35Red 0.4Brown 0.5
›› For Combo-Jet Single Nozzle Bodies
Part # 40440
Part # TwinABJ
Air Bubble Jet Twin Jet›› For Air Bubble Jet Nozzles ›› For standard tips, standard body
Part # Twincap (#152607TC)
Hypro Twin Cap›› When using two nozzles in each cap it creates smaller droplets at larger volumes therefore better penetration.
*NOZZLES NOT INCLUDED WITH TWIN CAPS
Twin Cap for Combo-Jet*
Twin Caps*
Greenleaf Broadcast NozzlesMedium Pressure TurboDrop XL 110° Nozzles›› Superior drift control, excellent penetration›› Venturi air injection nozzle, easy to clean›› Pressure range from 20—120 psi
Part#TDXL110**(sizes 01-10)
TurboDrop Dual 110° Fan Nozzle›› Air injection nozzle design allows spraying ›› the target two to four times in one pass. ›› 10° forward spray & 50° backward spray
Part# TADF** (sizes 01 –10
The CP Nozzles - Post-Emerge Sprayer and Fertilizer Nozzles›› CP Nozzles have Multiple orifices and tips ›› High Volume, Standard Volume, Low Volume available›› Each version has 18 possible setting combinations ›› Flat Fan Flow Rates›› Specifically designed for drift control ›› Standard quarter-turn quick change bodies of glass-filled nylon -
fits standard nozzle holders›› Easily adapted to new or existing sprayers.
›› First -turn inner dial to select metering orifices, (1-6)›› Second- turn outer dial to select numbered tip (1-3)›› Changing outer deflector tip controls the droplet spectrum to
smaller or larger droplets. ›› Produces a spectrum of large droplets to reduce drift›› Parts are replaceable, therefore this nozzle is a one-time purchase›› Three stream Fertilizer Accessory Tip can be added
Part# Description Orifice SizesCP-65T-SL Low Volume #1.5, #2, #3, #4, #5, #6 CP-65T-S Standard Volume #3, #4, #5, #6, #8, #10 CP-65T-SHP High Volume #10, #15, #20, #25, #30, #33
CPS275T-3SS Triple Stream Fertilizer Tip— for fertilizer application(Fertilizer Tip designed for 20 spacing: 14mph@40psi will give rates from 3.2—23.3 gpm, depending on which
volume nozzle is used
Part # Type ABJ** Air Bubble Jet Nozzles
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 34 Phone for current pricing
Blumhardt Manifold KitPart#Blumhardt-M* *Tube Holder Bracket not included
Blumhardt Cultivator Kit*Part# Blumhardt—C
Blumhardt Metering Orifices
TeeJet Part # 4916-** (order by orifice number)
Combo-Rate System›› Cap and seal, Combo pre-orifice›› Stainless steel clamps›› 1/4” or 3/8” or 1/2” HB insert›› 1” Sch. 80 PVC mounting pipe›› 10’ hose per shank›› Mount with 1”x1” steel tubing
or angle iron (not included)
›› Requires Flow Regulator Orifices›› Kit does NOT include screens,
tubeholders Orifices or other hose sizes
Orifice Flow Regulator
VeriFlow Fertilizer Nozzle with Push-In Barb›› Replaces eight conventional nozzles ›› VeriFlow nozzles control flow rate over an extended range of
flow rates for liquid fertilizer›› Flexible metering orifice automatically and appropriately
deformed by a flexible metering assembly in response to changes in liquid pressure
›› As pressure varies from 15-60 psi the flow rate varies
VariTarget Spray Nozzles with Tip Caps›› Spray tip cap used on the body assembly for in-field spraying›› VariTarget nozzle controls flow rate and maintains spray
pattern and droplet size over an extended range of flow rates.
VeriFlow Part # For Fertilizer with 1/4” or 3/8” Push-In BarbVeriFlow#LVF1R-14Q(38Q) LO-VeriFlow (Red tip) w/single push-inVeriFlow#VF1-14(38Q) VeriFlow (Green or Blue) w/single push-inVeriFlow#VF1y-14Q(38Q) VeriFlow yellow w/ single push-in barbVeriFlow#VF2*-14(38Q) VeriFlow (*Green or *Blue) w/double push-in VeriFlow#HVF2-14-Q HI-VeriFlow w/double push-in (light green body)Replacement PartsVeriFlow#C1001/4 (3/8) Fertilizer Cap w/ ¼” or 3/8” single hose barbC100-1/4Q(38Q) Fertilizer Cap w/ ¼” or 3/8”“single push-in”C200-1/4Q(38Q) Fertilizer Cap w/ double ¼”or 3/8” “push-in”
VariTarget Part# Description(Spraying) Droplet sizeVeriTargetVT110M Nozzle assembly w/yellow Tip MediumVeriTargetVT110C Nozzle assembly w/Blue Tip CoarseVeriTargetV110VC Nozzle assembly w/Green Tip V.CoarseVeriTarget#HVT110 Nozzle assembly w/white Tip Extremely CoarseReplacement Tips: Spray Tip Cap w/Santoprene gasket Red, Orange, Blue Green, yellow (other replacement parts available)
Liquid Fertilizer Systems
VeriFlow Nozzle/ VariTarget Cap
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
35 www.settermfg.comPricing can be found on-line
Blumhardt Parts
Part # Description 44512 1” Nut x 1/4” FPT44571 1” with orifice sleeve46114 3/8 Slip Cap Red46115 7/16” FSPT SW Nut46129 1” FSPT SW Nut
Adapter and Nuts
Part # Description 44554 Nut x 3/4” MPT x 1” MSPT44557 Nut x 1” x 1” MSPT44558 1” MSPT-O Nozzle T46100 1” MSPT56976 1” MSPT x 1” MTL x 1” MSPT
Tees
Part # Size45973 1/2”45974 11/16”45975 1”45991 1/4”46016 3/8”
Part # Description46583 Diaphragm (Santoprene)49605 Solenoid Valve50566 Coil Assembly
Solenoid Valve
Hose Barb AdapterMounting Space With NutPart # Description44478 Nut x Mtg x 1/2” HB44479 Nut x Mtg x 11/16”HB44480 Nut x Mtg x 1”HB47900 Nut x Mtg x 1/4” HB44482 Nut x Mtg x 1/4” HB
Part # Description45943 Manifold Head 1” FSPT with six ¼” HB45947 Mounting Block45949 Mounting Block Cap46118 1/4” HB Plug
Manifold Fittings
Part # Size45913 1/4” MPT45965 1” MSPT x ½” MPT45968 1” MSPT x ¾” MPT45970 1” MSPT45985 1” MSPT x 1” MPT
Blumhardt Nipples
Part # Description44580 Screen Body 50 mesh44581 Screen Body 80 mesh51644 FTL Self- Aligning Cap51626 Uni. Twist Lock Cap51643 Blank Twist Lock Cap51638 MTL Elbow67577 TeeJet TL Adapt.69295 Tee Nozzle w/check valve
Nozzle Body
Part # Description44493 1” Nut x 3/8” HB44495 1” Nut x 1” HB44496 1” Nut x 1/2” HB44497 1” Nut x 11/16” HB44499 1” Nut x 1/4” HB60303 1” Nut x 3/4” HB
Hose barb Adapter w/Nut
Hose barb MendersPart # Description 45922 1” MSPT x Mtg x 1/2” HB45923 1”MSPT x Mtg x 11/16” HB45924 1”MSPT x Mtg x 1” HB45939 1” MSPT x Mtg x 1/4” HB
Hose Barb with Mtg SpacePart # Description 46010 1” MSPT x 1/2” HB46011 1” MSPT x 11/16” HB46012 1” MSPT x 1” HB46172 3/4” MPT x 11/16” HB46180 1/2” MPT x 11/16” HB
Hose barb Adapter
Part # Description44564 1” Nut x 1” MSPT- 044565 1” Nut x 1” MSPT61189 1” Nut x 1” MPT
Threaded Elbow w/Nut
Part # Description44561 1” MSPT Nozzle Elbow46102 1” MSPT x 1” MSPT46104 1” MSPT x 3/4” MPT46105 1” MSPT x 1/2” MPT58276 1” MSPT x 1” MPT
Threaded Elbow
Part # 45680-45690 Color Sizes Available: Red, White, Blue, Green yellow, Purple, Black, Pink, Brown, Orange, and Olive
Cone Spray Tip
SEETechnologyTOUCHInnovation BEEmpowered
www.aginmotion.ca™ Denotes a trade-mark of Canada’s Outdoor Shows Limited Partnership.
SEE Technology TOUCH Innovation BE Empowered
DecisionsaremadeinthefieldatWesternCanada’sonlyoutdoorfarmexpo!
Join us at the second annual Ag in Motion on July 19 - 21, 2016.It’s a unique opportunity to get up close and personal with today’s agricultural technology. Experience live demonstrations of field equipment, crops, livestock and services all together on 320 acres near Saskatoon.
SASKATOON
LANGHAM16
SASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOON
LANGHAM16
™
SEETechnologyTOUCHInnovation BEEmpowered
www.aginmotion.ca™ Denotes a trade-mark of Canada’s Outdoor Shows Limited Partnership.
SEE Technology TOUCH Innovation BE Empowered
DecisionsaremadeinthefieldatWesternCanada’sonlyoutdoorfarmexpo!
Join us at the second annual Ag in Motion on July 19 - 21, 2016.It’s a unique opportunity to get up close and personal with today’s agricultural technology. Experience live demonstrations of field equipment, crops, livestock and services all together on 320 acres near Saskatoon.
SASKATOON
LANGHAM16
SASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOONSASKATOON
LANGHAM16
™
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 38 Phone for current pricing
Gauges and Teflon Tape
Part # PSIGD100B 100
2” Dry Gauge Back Mount›› 1/4” Centre back mount›› Painted steel case›› Glass window›› Not for use with oxygen›› Operating temp. 0°C - 40°C
›› 1/4” Brass lower mount›› ABS plastic case›› Acrylic window›› Not for use with oxygen›› Accuracy 3%-2%›› Operating temp. 0°C - 40°C
Part # PSIGD60P 60
2” Dry Gauge
Part # PSIGD60PB 60GD100PB 100
2 ½” Dry Gauge Back Mount2 ½”Dry Gauge
Part # Max PSI Max kPaGD60 60 400GD100 100 700
›› 1/4” Brass lower mount›› Dual scale›› Glass window›› Painted steel case›› Accuracy 3% - 2% Grade B›› Bourdon tube›› Operating temp. 0°C - 40°C
›› 1/4” Brass centre back mount›› ABS plastic case›› Acrylic window›› Not for use with oxygen›› Bourdon tube›› Operating temp. 32°C - 104°C
Part # Max PSI Max kPa GD4-60 60 400GD4-100 100 400
4” Dry Gauge›› 1/4” Copper alloy stem›› Acrylic window›› Painted steel case›› Bourdon tube›› Operating temp. 0°C - 60°C›› Dual range›› Not for use with oxygen
Part # Max PSI GD4.5-100SS 100
4 ½” Contractor Dry Gauge›› 1/4” Copper alloy ›› Clear acrylic window›› Bourdon tube›› Re-adjustable pointer›› Accuracy: ±1 % Full Scale›› 304 Stainless steel case›› Operating temp. -25°C - 60°C›› Threaded for restrictor (not incl.)
Part # Max PSI Max kPaGL60 60 400GL100 100 700GL600 600 600GL1500 1500 10000GL2000 2000 14000GL3000 3000 21000
2 ½” Liquid Filled Gauge›› 1/4” Copper alloy stem›› Dual scale acrylic window›› SS case, Bourdon tube›› Accuracy: 1.5% Full Scale›› Operating temp. -20°C - 60°C›› Use when vibrations or pulsation
Part # Max PSIGL4-100SS 100GL4-200SS 200
4” Liquid Filled Gauge›› 1/4” Lower mount›› Clear acrylic window›› Stainless steel case›› Bourdon tube›› Accuracy: 1.5% Full Scale›› Operating temp. -20°C - 60°C›› Connection 1/4” copper alloy›› Use when vibrations or pulsation occurs
Part #Teflon per roll10 rolls/pkg.
Teflon Tape
›› Pipe Thread Sealant›› For metal, PVC & plastic
›› Fast drying›› Includes application brush
Part # Max PSIGD60NH 60 (2-1/2” face)GD4-60NH 60 (4” face )
Dry Gauge for Ammonia›› 1/4” MPT ›› Stainless steel tube, Stem and Internal
parts›› Enamel Aluminum Case›› Poly Window›› Single Scale (PSI only)›› 2-1/2” or 4” gauge
Liquid Sealant with Teflon
Part # SizeTruBlu 8 oz. CanTruBlu-2 2 oz. Tube
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
39 www.settermfg.comPricing can be found on-line
CDS-John Blue Pumps and Fertilizer Accessories
›› Evenly mixes gas and liquid portions of NH3 and distributes accurately on each row
›› Can plug ports without any loss of accuracy›› Simple design allows for ease of service
without removing the distribution lines›› Handles all typical application rates without
changing any flow divider parts
Part # Outlets Inlet OutletIP-0600 6 1” NPT 1/4” NPTIP-1300 13 1” NPT 1/4” NPTIP-1800 18 1” NPT 1/4” NPTIPS-3 3 Port Impell. Splitter 1” NPT InletIPS-4 4 Port Impell. Splitter 1” NPT InletIPS-6 6 Port Impell. Splitter 1” NPT inlet
Impellicone- NH3 Flow Divider
›› Double Piston - Double acting›› Rated Flow 68.4 US GPM›› Rated Pressure: 120 PSI›› Rated Speed: 450 RPM›› 2” FPT Inlet, 1 ½” FPT Outlet›› All replacement parts available
Part # DescriptionLM-4955 replaced by NGP-9055LM-4955S replaced by NGP-9055-SNGP8055 Pump, less Clutch, 42gpm NGP8055S Stainless Pump End, less clutchNGP9055 Less clutch 68.4 gpmNGP9055S Stainless Pump End, less clutch
LM-4950 and NGP 9050Series Liquid Metering Ground Drive Pumps
In shop Pump repair center for pumps
Part # Description111947 Gasket Repair Kit for LM-4950111953 Gasket Repair Kit for LM-4450106029 Gasket Repair Kit for L-5100L-3090 Gasket Repair Kit for L-3800L-4090 Gasket Repair Kit for L-440
Liquid Metering Pump Repair Kits
›› 4.3-18.5 GPM›› Max 580 PSI, Max 160°F›› 3 Diaphragms›› 30 Crank case oil SAE›› 550 RPM operating speed
Part # HP Req. Suction Discharge DP-74.1 2.5 1” Hose 1/2” NPTDP-139 5.6 1 ¼” Hose 1/2” NPTDP-185 7.4 1 ¼” Hose 3/4” NPT
Medium Pressure Diaphragm Pumps
Part # Description 105913-91 Chart for LM-4900 Series106534-91 Chart- LM-4450 & L-4400105913-91 Chart for LM-2450 SeriesL3092-AS Setting Wrench- (4450,4950) L-1002 Setting Scale
Slide Charts - Pump Setting Wrench
Part # DescriptionDP-03004031 Diaphragm for DP-74DP-95004031 Diaphragm for DP-124DP-23001131 Diaphragm for DP-139DP-23001131 Diaphragm for DP-185DP-23004398 D Washer and bolt kit for DP139DP-23005597 D Washer and bolt kit for DP185
Diaphragm Repair Parts
Part # DescriptionDP-318697 For 3.5 - 5 HP EngineDP-318724 For 8 - 11 HP Engine
Gear Box Reduction Unit for Gas Engine
Part # Outlets Inlet OutletFD-1200 12 3/4” FPT 1/4” FPTFD-2000 20 1” FPT 1/4” FPT113986 Manifold Mount115284-01 Check Valve 1/4” x 1/4” HB115285-01 Check Valve 3/8” x 3/8” HB115286-01 Check Valve 1/2” x 1/2” HB
Exacto-Flow Flow Divider›› Stainless divider designed for liquid fertilizer›› Accurately divide liquid products across a wide
range of application rates›› Rates from as low as 2.5 GPA and as high as 80
GPA on 30” row spacing at 5 MPH›› PVC valves 1 PSI, viton seal, stainless ball›› Max Flow 2.25 GPM
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 40 Phone for current pricing
LM-4950 Series Liquid Metering Piston Pump
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
41 www.settermfg.comPricing can be found on-line
LM-4950 Series Piston Pump Repair Parts
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 42 Phone for current pricing
L-4900 Series Liquid Metering Piston Pump
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
43 www.settermfg.comPricing can be found on-line
L-4900 Series Piston Pump Repair Parts
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 44 Phone for current pricing© 2013 CDS-John Blue Co. 17
NGP- 505x / 805x / 905x SERIES
220 FLANGE ADAPTERS: - CAST IRON PUMPS USE 115701-02FLG OR 115601-02FLG
ON “DR” PUMPS WITHOUT MANIFOLD - STAINLESS AND MANIFOLDS USE 116083-01S SCREW-
IN ADAPTERS
NGP-505x / 805x / 905x Series
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
45 www.settermfg.comPricing can be found on-line
Parts Listing - NGP - 505x / 805x / 905x Series
© 2013 CDS-John Blue Co. 16
PARTS LISTING – NGP- 505x / 805x / 905x SERIES NGP-5050 NGP-8050 NGP-9050 NGP-5050 NGP-8050 NGP-9050 ITEM PART DESCRIPTION PART # PART # PART # ITEM PART DESCRIPTION PART # PART # PART # 1 KEY L-1020 L-1020 L-1020 55 STUFFING BOX 116070-01 115790-01 115690-01 2 SPROCKET RC50-18T 112661-01 112661-01 112661-01 -S STAINLESS N/A 115790-01S 115690-01S
-K NO SPROCKET NOT USED NOT USED NOT USED 56 INBOARD CYL. GASK. 116076-01 115710-01 115710-01 -R SPROCKET RC40-18T 113905-01 113905-01 113905-01 -U FUMIGANT N/A 104826-02 104826-02
3 5/16x3/8 SETSCREW 90532 90532 90532 57 STUFF. BOX INSERT 116068-01 L-1031-2 L-1031-2 4 GREASE FITTING H-28 H-28 H-28 -S STAINLESS NOT USED NOT USED NOT USED 5 5/16x3/8 SETSCREW 90532 90532 90532 58 PACKING - SNAP RING 112698-01 L-1042 L-1042 6 SPROCKET SPACER 115625-01 115625-01 115625-01 59 O-RING S-316 S-316 115604-01 7 O-RING S-316 S-316 S-316 -S STAINLESS N/A 104824-01 115612-01 8 THRUST WASHER 115626-01 115626-01 115626-01 -U FUMIGANT N/A 104824-01 115612-01 9 5/16x1 HEX BOLT 90637 90637 90637 60 O-RING S-316 L-3031 A-2848 10 OIL SEAL 115621-01 115621-01 115621-01 -S STAINLESS N/A 114768-01 114870-01 11 COVER PLATE 115723-01 115723-01 115623-01 -U FUMIGANT N/A 114768-01 114870-01 12 BEARING L-3019 L-3019 L-3019 61 DISCHARGE VALVE 116127-91 115707-91 115607-91 13 CONNECTING ROD L-1008-A L-1008-A 113630-01 62 SUCTION VALVE 116126-91 115706-91 115606-91 14 JOURNAL BEARING L-928 L-928 113629-01 63 INBOARD CYLINDER N/A 115701-02 115601-02 15 ROD BUSHING 113588-01 113588-01 113588-01 -F FLANGED 116071-01 115701-02FLG 115601-02FLG
16 ROD PIN 105895-01 105895-01 105895-01 -S STAINLESS N/A 115701-02S 115601-02S 17 ECCENTRIC - OUTER L-1013-A L-1013-A 113633-01 64 3/8 LOCK WASHER 93024 93024 93024 18 ECCENTRIC - INNER L-1015 L-1015 L-3017 -S STAINLESS N/A 93025 93025 19 TRANSFER SLEEVE 115783-01 115783-01 115683-01 65 3/8 HEX NUT 92024 92024 92024 20 PISTON ROD ASM 116078-91 115712-91 105900-91 66 PLUNGER – PACKING 112696-01 L-1045-V L-1045-V 21 ECCENTRIC PIN 112686-01 112686-01 L-3004 -B BUNA PACKING N/A L-1045-A L-1045-A 22 WOODRUFF KEY 108093-01 108093-01 A-4333 67 PLUNGER – GASKET 112712-01 L-1098 L-1098 23 CRANKSHAFT 115681-01 115681-01 115681-01 -U FUMIGANT N/A 114769-01 114769-01 24 O-RING L-1022 L-1022 L-1022 68 PLUNGER – WASHER 112695-01 L-1044-A L-1044-A 25 GREASE ZERK 115647-01 115647-01 115647-01 69 PLUNGER 112700-91 103290-91 112816-91 26 SETTING SLEEVE 115718-01 115718-01 115618-01 70 PLUNGER – LOCKNUT 92125 L-1047 L-1047 27 BEARING L-1007-A L-1007-A L-1007-A 71 VALVE COVER 116073-01 115703-01 115603-01 28 GASKET L-1006 L-1006 L-3002 -S STAINLESS N/A 115703-01S 115603-01S 29 VENT PLUG S-350 S-350 S-350 72 1/2 FLAT WASHER N/A NOT USED NOT USED 30 NAME PLATE 111958-01 111958-01 111958-01 -DR DUAL RATE (CYLS) N/A NOT USED NOT USED 31 DRIVE SCREW A-3557 A-3557 A-3557 73 3/8 X 1-1/2 HEX BOLT 90911 90911 90911 32 OIL PLUG C-431-B C-431-B C-431-B -S STAINLESS N/A 90654 90654 33 FLANGE COVER 115724-01 115724-01 115724-01 74 OUTBOARD CYL. 116072-01 115702-01 115602-01 34 5/16 X 1 HEX BOLT 90637 90637 90637 -S STAINLESS N/A 115702-01S 115602-01S 35 SETTING HUB 115627-01 115627-01 115627-01 75 1/2 HEX BOLT 90704 90704 90705 36 SCREW A-368 A-368 A-368 -S STAINLESS (2 BOLTS) N/A 90693/90687 90693/90687 37 SNAP RING 115791-01 115791-01 115791-01 76 MANIFOLD GASKET N/A 112696-01 112696-01 38 3/8 SELF-LOCK NUT A-3097 A-3097 A-3097 -DR DUAL RATE (CYLS) N/A NOT USED NOT USED 39 SETTING POINTER 115628-01 115628-01 115628-01 77 MANIFOLD N/A 115796-01 115696-01 40 SETTING SCALE 115645-01 115645-01 115645-01 -S STAINLESS N/A 115796-01S 115696-01S 41 3/8x2-1/4 CARR.BOLT 115646-01 115646-01 115646-01 -DR DUAL RATE (CYLS) N/A NOT USED NOT USED 42 OIL SEAL 115622-01 115622-01 115622-01 78 ½ HEX BOLT N/A 115793-01 115693-01 43 CRANKCASE 115780-01 115780-01 115680-01 -DR DUAL RATE (CYLS) N/A NOT USED NOT USED 44 CROSSHEAD GASK. 115711-01 115711-01 115611-01 79 SPROCKET KEY 106493-01 106493-01 106493-01 45 1/2 HEX NUT 92029 92029 92029 A RC50-18T SPROCKET 106532-01 106532-01 106532-01
-S STAINLESS N/A 92030 92030 -K NO SPROCKET NOT USED NOT USED NOT USED 46 NOT USED -R RC40-18T SPROCKET 113907-01 113907-01 113907-01 47 HEX BOLT 90637 90637 90860 B SPRKT. SPACER ASM 115624-91 115624-91 115624-91 48 CROSSHEAD GUIDE 116069-01 115700-01 115600-01 C CONN. ROD ASM L-1008-B L-1008-B 113645-91 49 STUFF. BOX GASK. 116075-01 115610-01 115610-01 D FLANGE COVER ASM 115725-91 115725-91 115725-91
-U FUMIGANT N/A 104828-02 104828-02 E SET HUB ASM 115629-91 115629-91 115629-91 50 O-RING 116074-01 111943-01 111943-01 F SET POINTER ASM 115630-91 115630-91 115630-91 51 PACKING 'V' SET L-1113 L-1109 L-1109 G GASKET KIT 116135 115789 115689
@ CROSSHD GUIDE USE 4 “V”s N/A N/A -S GASKET KIT - SS N/A 115789-S 115689-S -U FUMIGANT N/A L-1109-U L-1109-U -U GASKET KIT - FUM N/A 115789-U 115689-U
52 PACKING WASHER 112694-01 L-1041 L-1041 H OPERATORS KIT 115787 115787 115787 53 PACKING SPRING 112697-01 L-1063 L-1063 N/S SLIDE CHART 115698-91 115698-91 115698-91 54 GREASE ZERK H-30 H-30 H-30 N/S SETTING WRENCH 115631-01 115631-01 115631-01
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 46 Phone for current pricing
Part # MPT x FPT2152 3/4” x 3/4”
›› Connect 1/8” gauge tubing to supply lines›› Mount on 3/4” boom
Pressure AdapterPart # Description 1214 on/off switch Single pole1175 Regulator switch 6 terminal
Valve Switches
›› Chemical resistant nylon body›› Stainless steel motor shaft ›› Butterfly›› Viton seal›› Low current draw 50 Amp at 12 Volt›› Max 150 PSI›› Close-tolerance butterfly for use as
bypass regulator or throttling valve
Part # Description 1560A 3/4” NPT and orifice Flow up to 50 GPM 1541A 1” NPT and orifice Flow 15-100 RPM
Electric Pressure Regulator
›› Isolator keeps chemicals from entering tractor or truck cab.
›› Dampens and protects pressure gauge from corrosive chemicals
›› Max 125 PSI›› Filled with non-toxic RV antifreeze
Part # Description 2300 Isolator with mounting bracket2391 Isolator with mounting bracket
and 1/4” FNPT2350 Isolator with mounting bracket
and 1/8” FNPT2256 1/8” x 1/4” tube union1181 1/8” x 1/8” tube union
Chemical Isolator and Fittings
›› Can use with either 2 or 3 way applications›› 5 PSI drop at 30 GPM›› Wetted parts made of glass filled nylon and stainless steel›› Teflon shaft and ball seals›› Enclosed motor with sealed connector›› 2.5 Amps max›› Protected by resetting fuse›› Up to 5 sections›› Open/closing time 8 seconds
Part # Description 2701 Single valve with 1 NPT inlet 1 NPT side outlet
2702 Mounted on stackable manifold up to 5 sections. Outlets 1” NPT. Mounting holes on bottom of end plates2702-1 Shut off valve single
2702F Flanged valves have flanged manifold and outlet fittings, 1½” NPT and outlet fittings 3/4” NPT.2702-1F Shut off valve single
2700 Series Electric Ball Valve Control System
›› 6’ Cab Harness›› 8’ sprayer harness›› Pressure regulator
›› Solenoid shutoff valves # 1999A
›› Valve mounting bracket
Part # Specifications 2040 1541A pressure regulator 3- #1999A Solenoid Valves
2060 2 boom switches # 1541A pressure regulator 2 - #1999A Solenoid Valves
Texas Industrial Remcor Accessories
Part/Model # Description2605 1 valves2606-2 2 valves2607-2 3 valves
-Attach to 2 boom pipes
2600 Nozzle Body Valve›› Clamp onto 3/4” NPT boom pipe›› Valves go into 3/8” holes in pipe›› Use for: field, golf, and road spraying›› 0.148 Orifice size, 1 GPM›› 80 PSI, 12V, .85 Amp
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
47 www.settermfg.comPricing can be found on-line
Texas Industrial Remcor Solenoid Valves
2500B Series 12V Solenoid Valve›› Low power draw; of 2 amps at 12 volts›› Low pressure loss; 5 PSI at 10 GPM›› 3/4” FPT Inlet 3/4” MPT
By pass›› 1/2” FPT Boom outlet›› Chemical resistant nylon
body and stainless steel›› Viton diaphragm, seat
and seals
Part # Max PSI Flow2500B-1 100 0-10 GPM2502B-1 175 0-8 GPM2352 Repair Kit
›› Nozzle Body outlet›› 1/4” FNPT Inlet›› 12V DC›› Viton seals and o-rings›› Chemical resistant nylon and stainless
steel body›› Orifice Size: 2601A, 2602A= .248
2603= .105
Part # PSI GPM Amp2601A 125 1 1.12602A 50 1 .852603A 125 1/2 .85
2600A SeriesNozzle Body Valve
›› 1 Valve›› 1/2” FNPT boom outlet›› 3/4” FNPT Inlet 3/4” MNPT By pass›› Low pressure loss; 5 PSI at 10 GPM›› Low power draw; of 2.4 amps at 12 volts›› Chemical resistant nylon body and
stainless steel›› Viton diaphragm, seat
and seals
2100B Series12V Solenoid Valve
Part # Description2100B-1 2255 Repair Kit
Part # Amp Orifice2204A .85 .105
2204A 3-WaySolenoid Valve›› Ideal for foam markers›› 12V DC›› 55 PSI, 1/2 GPM›› 1/4” FNPT Inlet\outlet ›› Viton seals and o-ring›› Chemical resistant nylon and stainless
steel body
Part # Amp Orifice Size2504B 1.1 .220
2504B 3-WaySolenoid Valve›› 12V DC›› 75 PSI and 2 GPM›› 1/2” FNPT Inlet›› Two 1/2” FNPT outlets›› Viton seals and o-rings›› Chemical resistant nylon and stainless
steel body
1999 Series12V Solenoid Valve
Part # Valves1999A- 11999A- 32045 Repair Kit1974 Viton Diaphragm
›› Low power draw; of 1.1 amp›› Chemical resistant nylon body›› Viton diaphragm and seals and o-rings›› Low pressure loss; 5 PSI at 18 GPM›› Max.125psi, Max.120°F›› 3/4” FPT Boom›› 1” FPT Inlet x 1” MPT Bypass
2200 Series Solenoid Valve›› Wetted metal parts and stainless steel›› Viton seals›› 1/4” FPT Port›› 5% pressure drop across valve›› Max temp 120°F 12 V DC
Use with:›› Boom end nozzle control›› Chemical injection
systems›› Foam and die marker
liquid control›› ATV and ESTATE sprayer
boom control
Part/ PSI GPM Amp OrificeModel # Size2201A 125 1 1.1 .1482202A 80 1 0.85 .1482203A 175 1/2 0.85 .1482206A 200 .22 .85 .070
2501B Series12V Solenoid Valve
Part # In/Out Port2501B 1/2” FPT2352 Repair Kit
›› Chemical resistant nylon body›› Low power draw; of 2 amps at 12 volts›› Low pressure loss; 5 PSI at 6 GPM›› Viton seat and seal
Part # Description1988 for single valve1989 for double valve1990 for triple valve
›› Made with 14 Gauge stainless steel›› Hardware included›› For solenoid valve 1999A
Mounting Brackets
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 48 Phone for current pricing
PVC Fittings - Schedule 40
Part# Slip x Slip 406-053 3/8” x 1/2”406-101 3/4” x 1/2”406-130 1” x 1/2”406-131 1” x 3/4”406-166 1 ¼” x 1/2” 406-167 1 ¼” x 3/4” 406-168 1 ¼” x 1”406-209 1 ½” x 1/2” 406-211 1 ½” x 1”406-249 2” x 1”406-250 2” x 1 ¼”406-251 2” x 1 ½”
PVC Reducing 90° Elbow
PVC 90° Street ElbowPart# Spig x Slip409-007 3/4”409-010 1”409-012 1 ¼”409-015 1 ½”409-020 2”
Part # MPT x FPT412-005 1/2”412-007 3/4”412-010 1”412-012 1 ¼”412-015 1 ½” 412-020 2”
PVC 90° Street Elbow
Part # Slip413-005 1/2”413-007 3/4”413-010 1”
PVC Side Outlet Elbow
PVC 90° Reducing ElbowPart# Slip x FPT 407-074 1/2” x 3/4”407-101 3/4” x 1/2”407-130 1” x 1/2”407-131 1” x 3/4”407-168 1 ¼” x 1”407-251 2” x 1 ½”
Part# Slip x Slip406-003 3/8”406-005 1/2”406-07 3/4”406-010 1”406-012 1 ¼”406-015 1 ½”406-020 2”
PVC 90° Elbow
Part# FPT x FPT408-005 1/2”408-007 3/4”408-010 1”408-012 1 ¼”408-015 1 ½”408-020 2”
PVC 90° Elbow
Part # Slip x Slip 429-101 3/4” x 1/2” 429-131 1” x 3/4” 429-168 1 ¼” x 1” 429-210 1 ½” x 3/4” 429-251 2” x 1 ½”
PVC Reducer Coupling
Part # Slip x Slip429-003 3/8”429-005 1/2”429-007 3/4”429-010 1”429-012 1 ¼“429-015 1 ½”429-020 2”429-025 2 ½”429-030 3”
PVC Coupling
PVC 90° Street ElbowPart # Slip x MPT410-005 1/2” x 1/2”410-007 3/4” x 3/4”410-010 1” x 1”410-012 1 ¼” x 1 ¼”410-015 1 ½” x 1 ½”410-020 2” x 2”
PVC 45° ElbowPart # Slip x Slip417-005 1/2” 417-007 3/4” 417-010 1”417-012 1 ¼”417-015 1 ½”417-020 2”
PVC 90° ElbowPart# Slip x FPT407-005 1/2”407-007 3/4”407-010 1”407-012 1 ¼”407-015 1 ½”407-020 2”407-025 2 ½”407-030 3”407-040 4
PVC CouplingPart # FPT x FPT 430-005 1/2”430-007 3/4”430-010 1”
Part # Slip 420-005 1/2”420-007 3/4”420-010 1”420-012 1 ¼”420-015 1 ½”420-020 2”
PVC Cross
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
49 www.settermfg.comPricing can be found on-line
PVC Fittings- Schedule 40, Primer/Cement and Sprayer Boom
Part # MPT x Slip 436-074 1/2” x 3/4”436-101 3/4” x 1/2”436-102 3/4” x 1”436-131 1” x 3/4”436-132 1” x 1 ¼”436-168 1 ¼” x 1”436-169 1 ¼” x 1 ½”436-212 1 ½” x 1 ¼”436-213 1 ½” x 2”436-251 2” x 1 ½”Part # Spig. x FPT478-005 1/2”478-007 3/4”478-010 1”
PVC Reducer Adapter
Part # Slip x FPT438-072 1/2 x 1/4”438-073 1/2” x 3/8”438-101 3/4” x 1/2”438-130 1” x 1/2”438-131 1” x 3/4”
PVC Reducer Bushing
Part # Slip447-005 1/2”447-007 3/4”447-010 1”447-012 1 ¼”447-015 1 ½”447-020 2”
Part# Type Colour5996P Primer Clear5996PP Primer Purple5991T Cement White
236ml PVC Primer/Cement
PVC and Aluminum Sprayer Boom Pipe
Size (ID) Schedule Colour Length 3/4” PVC40 White 10’1” PVC40 White 10’2” PVC40 White 20’
Size (ID) Schedule Colour Length 3/4” PVC80 Grey 20’1” PVC80 Grey 20’
Part # Spig. x Slip 437-101 3/4” x 1/2”437-130 1” x 1/2”437-131 1” x 3/4”
PVC Reducer BushingPart # FPT 448-005 1/2” Cap 448-007 3/4” Cap 448-010 1” Cap
Part# MPT450-005 1/2” Plug450-007 3/4” Plug450-010 1” Plug
PVC Cap and Plug
PVC Cap and Plug
Part # Spig.449-005 1/2”449-007 3/4”449-010 1”449-012 1 ¼”449-015 1 ½”449-020 2”
Part # Size (ID) BoomA3/4” 3/4”BoomA1” 1”
Aluminum Pipe - ends are threaded›› Holes drilled to specifications
PVC Pipe - is joined with PVC Cement and threading ›› Holes drilled to specification
PVC Tee
PVC TeePart # Slip x Slip x FPT402-005 1/2”402-007 3/4”402-010 1” 402-012 1 ¼“402-015 1 ½”402-02 2”Reducing Tee402-101 3/4” x 3/4” x 1/2”402-130 1” x 1” x 1/2”402-131 1” x 1” x 3/4”402-211 1 ½” x 1 ½” x 1”
PVC AdapterPart # Slip x FPT435-005 1/2” x 1/2”435-007 3/4” x 3/4”435-010 1” x 1”435-012 1-1/4”x 1-1/4”435--015 1-1/2”x1-1/2”435-020 2” x 2”
Part # Slip x MPT436-003 3/8” x 3/8”436-005 1/2” x 1/2”436-007 3/4” x 3/4”436-010 1” x 1”436-012 1 ¼” x 1 ¼”436-015 1 ½” x 1 ½”436-020 2” x 2”436-030 3” x 3”
Part # Slip x Slip x Slip401-005 1/2”401-007 3/4”401-010 1”401-012 1 ¼“401-015 1 ½”
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 50 Phone for current pricing
Nylon Fittings
Part # MPT x HBHB18N 1/8”HB18316N 1/8” x 3/16”HB18025N 1/8” x 1/4”HB18516N 1/8” x 5/16”HB18038N 1/8” x 3/8”HB02516N 1/4” x 1/16”HB02518N 1/4” x 1/8”HB025316N 1/4” x 3/16”HB025050N 1/4” x 1/2”HB025N 1/4”HB038N 3/8”HB050N 1/2”HB05034N 1/2” x3/4”HB075N 3/4”HB075050N 3/4” x 1/2”HB075100N 3/4” x 1”HB100N 1”HB10034N 1” x 3/4”HB125N 1 ¼”HB150N 1 ½”
Hose barb Adapter
Part # MPT x HBHB1890N 1/8”HB1831690N 1/8” x 3/16”HB1802590N 1/8” x 1/4”HB1851690N 1/8” x 5/16”HB1803890N 1/8” x 3/8”HB02531690N 1/4” x 3/16”HB02590N 1/4”HB0251690N 1/4” x 5/16”HB02503890N 1/4” x 3/8”HB02505090N 1/4” x 1/2”HB0255890N 1/4” x 5/8”HB03831690N 3/8” x 3/16”HB03802590N 3/8” x 1/4”HB03890N 3/8”HB03805090N 3/8” x 1/2”HB0385890N 3/8” x 5/8”
Hose barb Elbow 90°Part # MPT x HB HB0502590N 1/2” x 1/4”HB0503890N 1/2” x 3/8”HB05090N 1/2”HB0505890N 1/2” x 5/8”HB05007590N 1/2” x 3/4”HB050131690N 1/2” x 13/16”HB05010090N 1/2” x 1”HB07502590N 3/4” x 1/4”HB07503890N 3/4” x 3/8”HB07505090N 3/4” x 1/2”HB07590N 3/4”HB07510090N 3/4” x 1”HB10005090N 1” x 1/2”HB10007590N 1” x 3/4”HB10090N 1”HB12590N 1-1/4”HB12507590N 1 ¼” x 3/4”HB15090N 1 ½”
Hose barb Elbow 90°Part # FPT x HBHBF038050N 3/8”x1/2”HBF050025N 1/2”x1/4”HBF050038N 1/2”x3/8”HBF050N 1/2”HBF050058N 1/2”x5/8”HBF050075N 1/2”x3/4”
Hose barb Adapter
Part # HB x HBHM18N 1/8”HM18025N 1/8” x 1/4”HM18038N 1/8” x 3/8”HM316N 3/16”HM050N 1/2”HM025N 1/4”HM025050N 1/4” x 1/2”HM516N 5/16”HM075N 3/4”
Hose Mender
Part # HB x HB x HB 557065 3/16”557066 1/4”557068 5/16”557072 1/2”557075 5/8”
Nylon “Y” Fittings
Part # HB x HBHM02590N 1/4”HM05090N 1/2”HM07590N 3/4”HM10090N 1”HM12590N 1 ¼”HM15090N 1 ½”HM20090N 2”
Hose Mender Elbow 90°
Part # MPT x MPTNIP025N 1/4”NIP050N 1/2”NIP075N 3/4”NIP100N 1”NIP125N 1 ¼”NIP150N 1 ½”
NipplesPart # FPTTEE050N 1/2”TEE075N 3/4”
Tee with 1/4” Gauge Port
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
51 www.settermfg.comPricing can be found on-line
Garden Hose Fittings*
Garden Hose Brass Fittings
Part # MGHT x HBGH40-34 3/4”
Garden Hose Hose barb Adapter
Part # FGHT x MGHTGH47-34 3/4”
Garden Hose Adapter
Part # MGHT x FPTGH43-34 3/4”
Garden Hose AdapterPart # FGHT x MPTGH46-34 3/4”
Garden Hose Adapter
Part # MGHT x MGHTGH48-34 3/4”
Garden Hose Nipple
Part # MGHT x MPTGH39--3412 3/4”x 1/2”GH39-34 3/4”
Garden Hose NipplePart # SizeGH1713 3/4”
Garden Hose Filter and WasherPart # SizeGH1712 3/4”
Garden Hose Washer
Part # MGHT x MGHTGH48-34B 3/4” x 3/4”
Part # MGHT x MGHTGH43-34B 3/4” x 3/8”
Garden Hose Adapter
Garden Hose Reducer
Part # FGHT x FPTGH58-12 3/4” x 1/2”GH58-34 3/4”
Garden Hose Coupling
Part # MGHT x HBGH40-58B 3/4” x 5/8”GH40-38B 3/4” x 3/8”GH40-12B 3/4” x 1/2”
Garden Hose Barb Adapter
Part # FGHTGH50-34B 3/4”
Garden Hose Cap
Part # FGHT x MPTGH60-12B 3/4” x 1/2”
Garden Hose SwivelPart # FGHT x HBGH70-58B 3/4” x 5/8”GH70-38B 3/4” x 3/8”GH70-12B 3/4” x 1/2”GH70-34B 3/4” x 3/4”
Garden Hose Swivel Adapter
Part # FGHT x MPTGH46-12B 3/4” x 1/2”GH46-34B 3/4” x 3/4”
Garden Hose AdapterPart # MGHT x MPTGH56-12B 3/4” x 1/2”GH56-34B 3/4” x 3/4”
Garden Hose AdapterPart # FGHT x FGHTGH55-34B 3/4” x 3/4”
Garden Hose Swivel Adapter
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 52 Phone for current pricing
Part #45652
GPA Calibration Bottle›› Provides Accurate method
of measuring flow from single nozzle orifice outlet.
Part # DescriptionGloves PVC PVC GloveGloves 8045 Lined Chemical PVC GlovesGloves Disposable Gloves (nitrile)Disposable Box available (100gloves)
Gloves
Part # PestiRinser
Pesti-Rinser›› Pesticide container rinsing device›› On/off spring loaded valve
Dutch Cab Filter
Part # Description Cab Filter Some tractors require 2 filtersCarbon #70055 Granular CarbonCarbon AMMO #70056 Carbon for Ammonia
›› Uniquely formulated to filter out chemicals and odors›› Order by make and model of cab
Part # Colour SH501 Red SH501A Amber
Reflector Strips– Red/yellow
Highway Safety Lights›› Lights 2000m max›› Magnetic ›› Weather Resistant›› Uses 4-AA Batteries›› Flash/Solid light
Part # DescriptionGoggle I Vented goggle neoprene band Goggle D Direct vented (perforated frame) elastic headband
Chemical Splash Goggles
Polypropylene / Tyvek Coveralls›› Disposable lightweight›› Breathable fabric›› Zipper front, hooded›› White colour›› Polypropylene suites: - for Paint/Dust
›› Tyvek Suits: -Chemical Resistant -used for cleaning/liquid handling
›› Quick and accurate way to check if nozzles are spaying the correct amount of liquid.
Part #60100-00
Electronic Nozzle Calibrator
3M Respirators and AccessoriesPart # Description3M-6200 Respirator ½ Face Mask3M-5P71 Pre-Filter3M-6001 Organic Vapor Cartridge3M-6002 Acid Gas Cartridge3M-6006 Multi Gas/Vapor Cartridge3M-2091 P100 Rated Filter3M-5010 Clips Pre-filter
Safety Equipment
Part # SizeCoveralls S-L
Tyvek Coveralls:Available in sizes:S, M,L, XL, XXL. XXXL
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
53 www.settermfg.comPricing can be found on-line
Agricultural Hoses and Hose Cutter
Suction/Discharge-FlexibleSize ID Price (ft.) PSIBW 3/4 $2.00/ft 115BW 1” $2.50/ft 115BW 1¼ $2.70/ft 115BW 1 ½” $2.70/ft 115BW 2” $4.10/ft 90BW 3” $8.60/ft 90
Blue Water Hose (Low Temp)Size ID PSI1/2”(bk/w) 1251 ID 100
EVA Tubing
Size ID Price (ft.) PSI1” $3.05/ft 801 ¼” $3.40/ft 701 ½” $3.75/ft 602” $5.00/ft 603” $9.50/ft 504” $16.10/ft 45
EPDM Poly Rubber
Rubber Water Suction (Heavy Wire Helix Braided)
Size ID1 ¼”1 ½”2”
Part # Description46297 Cuts up to 1 ¼” Hose46298 Blade with 1 pin 46298-2 Blade with 1 pin
›› Blade closes into it’s own handle›› Replaceable stainless steel blade
Hose Cutter
Size ID PSI Colour1/2” 600 yellow1/2” 800 Green3/8” 600 yellow3/8” 800 Green
High Pressure Hose
Rubber Sprayer (4 spiral)
Size ID PSI3/4” 1131” 144
PVC Suction/DischargeSize ID PSI3/4” 1101” 851 ¼” 851 ½” 702” 652 ½” 653” 654” 65(other sizes available to order)
Blumhardt HosePart# Size ID46428 3/16”46434 1/4”ID
NH3 Hose (Stainless Steel Braided)Size Part #1” NH3 -N2595-11¼” NH3-2595-125
NH3 Hose (Nylon Braided)Size Part#1” 1” Braided1¼” 1¼” Braided
Superflex (Low Temp ) (N/S—Special Order only)
NRV HOSE* (Suction/Discharge)
Size ID PSI3/16”ID 551/4” ID 555/16”ID 503/8” ID 45
Size ID PSI1/2” ID 455/8” ID 40 3/4” ID 351” ID 25
Clear Sight Gauge Tubing
Size IDNRV 3/16”NRV 1/4”NRV 5/16”NRV 3/8”NRV 1/2”
Size IDNRV 5/8”NRV 3/4”NRV 1”1 ¼”1 ½”
Size ID PSI (Blue –light hose)1 ½” 702” 653” 554” 506” 35
LAYFLAT Water Discharge
›› PVC Water Discharge Hoses are selected according to working pressure and abrasion resistance
›› Blue lightweight lay-flat›› Red –higher pressure rating›› Black is thicker wall used where
abrasion is significant
Size ID PSIG341- 2” 150G341- 3” 150 (weight: 1.8lbs/ft)
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 54 Phone for current pricing
Stainless Steel Clamps*, Hose Reels and Accessories
Part # Norm. Min Max Size Diam. Diam.Clamp#4 1/4” 1/4” 5/8”Clamp#5 5/16” 5/16” 7/8”Clamp#6 3/8” 3/8” 7/8”Clamp#8 1/2” 1/2” 1”Clamp#10 5/8” 9/16” 11/8”Clamp#12 3/4” 11/16” 1¼”Clamp#16 1” 5/8” 1½”Clamp#20 1¼” 13/16” 1¾”Clamp#24 1½” 11/16” 2” Clamp#28 1¾” 17/16” 21/8”Clamp#32 2” 19/16” 2½”Clamp#36 2¼” 113/16” 2¾”Clamp#40 2½” 21/16” 3”Clamp#44 2¾” 25/16” 3¼”Clamp#48 3” 29/16” 3½”Clamp#52 3¼” 213/16” 3¾”Clamp#54 3½” 3” 313/16”Clamp#56 3½” 3” 4”Clamp#104 6½” 61/8” 7”
Global 300 Stainless Steel
Part# Min Max Diam.45740 2¼” 8¼”45741 3” 9¾”45742 3½” 12¼”45743 7” 22¾”45744 10” 32½”
Blumhardt Snap Lock Clamps
Part# Length 100/pkgHJ-190B 7½” HJ-280W 11” HJ-280B 11” HJ-280LB 11” HJ-368B 14½” HJ-380B 14½” HJ-450B 18” HJ-540B 21.3” (Ties below are Sold Individually)HJ-762W 30”
Nylon Cable Ties›› White (W) or Black (B) Nylon
Part# Length 46109 9”46117 15”
Blumhardt Reusable Ties›› Chemical resistant nylon
Part# Size Min Max Diam. Diam.TC162 1¼” 1.62” 1.87”TC181 1½” 1.81” 2.06”TC193 1½” 1.93” 2.18”TC218 2” 2.18” 2.50”TC231 2” 2.31” 2.62”TC250 2” 2.50” 2.81”TC287 2” 2.87” 3.18”TC331 3” 3.31” 3.62”TC343 3” 3.43” 3.75”TC425 4” 4.25” 4.56”TC438 4” 4.38” 4.76”TC456 4” 4.56” 4.94”
Banjo T-Bolt Clamps
Double O-RingLiquid Lock Swivel
›› 12V Electric Motor with Electric Wireless Remote Control
›› Manual Crank Handle included
›› Guide Tubes for easy retrieval›› Manual Clutch Lockout for easy Pull-Out›› Stainless Steel Swivel available
ELECTRIC HOSE REELS
Part #/ Model Description Capacities:HR100 1” Manual 100’ 1”(500-1/2”)HRE100 1” ELECTRIC 100’ 1” (500-1/2”)HR200 2” Manual 75’ - 2” HoseHRE200 2” ELECTRIC 75’ - 2” Hose HRE300 3” ELECTRIC 70’ - 3” HoseDimensions: 2”- 30.5”W x 28.5”L x 26”H—150 lbs 3”- 30.5”W x 41”L x 39”H –255 lbs
12 V Electric Hose Reel›› Holds 300’ of 1/2” hose›› Positive Chain Drive›› Locking Pin Not included›› Shown with optional chain guard/roller kit
Part# Hose Reel- Cox Electric
›› Brass swivel with 3/8” FPT ›› Holds 200’ of 3/8” hosePart# Hose Reel– Red
›› Brass swivel with 1/4” FPT›› Holds 75’ of 1/2” hose›› Compact size (12’ L x 10”W)
Part# Hose Reel—Black
›› All steel frame›› 1/2”female swivel, Max 1000psi›› Holds 300’ of 1/2” hose
Part # HoseReel- Cox Manual
Manual Hose Reels
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
55 www.settermfg.comPricing can be found on-line
Setter’s Complete Management System and Mix Tank
›› The total seed treatment applicator has accurate application rates up to 735 bu/hr
›› Designed for use with water soluble seed treatments, liquid inoculants.
›› Comes with 10’ hose and cam-lock fitting
Part #SeedTreater
The Seed Treater
SCOTT’S NH3 Tank Winch & Hitch›› Winch/hitch system is designed for easy installation, safety
and long life.›› Enough power to pull most anhydrous tanks. ›› Free wheeling spool for faster long distance hookups›› Safety shear pin will snap at
approx. 7500 lbs.›› Comes with control valve›› Average line pull on a 2000 gal.
tank is between 4000-5000 lbs of tension
›› 10,000+ lbs. of line pull
Machine specific
›› Designed to blend wettable powders and fertilizers into a Liquid solution in minutes.
›› Steel Frame with 60 Imp.Gal Tank›› 2” Banjo plumbing to connect Pump not included
Granular Mix Tank
›› Heavy-duty Steel Frame (Powder-coated) with fork lift slots›› 2” or 3” Banjo Manifold Inductor ›› 2” or 3” Banjo Flanged plumbing (manifold fittings)›› Plumbed to draw from 3 separate Totes (up to five is optional)›› 2”- 6.5 HP Hypro PowerPro Engine/2”Poly Pump (200gpm)›› 3”- 13 HP Hypro PowerPro Engine/electric Start(440gpm) ›› Flush lines to rinse, preventing cross-contamination›› 42 Gallon White Cone Tank w/ Stainless Steel knife.›› Adjustable slide-mount for OPTIONAL Flowmeter
Dimensions: 2” System - 70”L x 29” W x 43”H3” System - 81”L x 36” W x 43”H
Setter’s Complete Chemical Management System
›› Injects Chemical into Pressure Line (installed after pump)›› Keeps Pump free of Chemical›› Tru-Kleen Cone-Bottom Rinse System›› Anti-Vortex Plate›› Mixes Dry ChemicalDescription 30 Gallon Tru-Kleen Chemical Injector40 Gallon Tru-Kleen Chemical Injector65 Gallon Tru-Kleen Chemical Injector100 Gallon tru-Kleen Chemical InjectorOPTIONS:Stainless Jug Rinse2” Venturi Bypass only3” Venturi Bypass only
Tru-Kleen Chemical Injector
Part#SET-60BLEND
Shown with OPTIONAL Venturi & Jug Rinse
Description:2” includes 6.5HP Engine/2” Pump3” includes 13HP Engine/3” Pump
Coiled Hose with pistol-grip nozzle included (attaches to the primer port of pump)›› Includes brass fitting and micro-valve
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 56 Phone for current pricing
Weed Rollers, Backpacks, Spot Sprayers and Meters
Part # Tank SizeFS14Sprayer 14 Gallon FS25Sprayer 25 Gallon
F/S 12V Spot Sprayer›› 12 V Shurflo Diaphragm Pump›› Hand gun with 20’ Hose›› Internal Switch
›› Fire Control Sprayer, 4 Gallon›› Hand wand with 40’ Hose›› Double action pump›› 22’ Vertical, 39’ Horizontal throw
Part # TypeSKF04 Fire Control Sprayer (dimensions 7 x 16 x 21)
Backpack Sprayers
Part # SizeFS36 WeedRoller 36” Push-type (3 gallon Tank)FS48 WeedRoller 48” Pull-type (12 gallon Tank)FS72 Weed Roller 72” Pull Type (25 gallon Tank)
›› 3 Gallon supply tank (Push)›› 12 or 25 Gallon supply tank (Pull)›› Adjustable roller and hitch height›› No Drift, Wick-Type roller
›› Gravity fed ›› Safe application for herbicide
to lawns, golf fairways or recreational fields
F/S Weed Roller
Part # DescriptionPB13P 13’ Poly BoomPB20P 20’ Poly Boom
Part# DescripitonPB26P 26’ 3 Section Poly BoomPB30P 30’ 3-Section Poly Boom
Poly Boom›› Tough polyethylene, lightweight, UV stabilized›› Boom construction in three sections›› Nozzle guards and positive break away
›› Galvanized Steel Center Section›› Corrosion and crack resistance›› TeeJet holders (single)
›› Self-priming diaphragm pump, double action
›› Flow rate 13gpm (12 VDC)›› 1/4HP–20 amp Cast Motor
›› 1” Rubber hose and nozzle (meter not
included)
Part # Sotera 435
The Sotera 435—12 V Transfer Pump
›› 1”FNPT inlet/outlet, 2-20 gpm›› 2—AA batteries
Part# SOTERA 850
ShurFlo Ag Runner Transfer Pump›› SF1100 Chemical Transfer Pump›› 20’ cable, clips, inline fuse. *12 VDC Motor›› 1” x 12’ discharge and inlet hose
Part#SF1100 PTS Pump/cage/ meterFM1100 Meter only (2-20 gpm)SF-1100 Pump Only
Description#Electric BackPack
›› 4 Gal.tank, sprays up to 120 gal./charge›› Padded back and shoulder harness›› One-touch control - 4 speed settings›› Hand lever to on/off spray control›› Rechargeable 12V battery›› High capacity charger
Electric Backpack Sprayer—ShurFlo
MFM100 1” FP (2-110 gpm)MFM220 2” FP (30-300 gpm)MFM300 3” FP (14-670 gpm)
Banjo Digital Flow Meter›› Magnetic style meter, 6 AA batteries›› Self-calibrating, Accuracy 99%›› Displays total volume and batch total›› Reads most CONDUCTIVE fluids
Sotera 850 Series Meter
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
57 www.settermfg.comPricing can be found on-line
Fuel Tanks
Part # Imp. Gal. Length Width Height Weight95 95 48” 32” 24” 365 lbs135S 135 60” 32” 24” 512 lbs135T 135 48” 32” 33” 512 lbs165 165 60” 32” 33” 644 lbs300 290 61” 44” 30” 1193 lbs 580 480 79” 45” 47” 1879 lbs1000 803 84” 49” 68” 3338 lbsSINGLE-WALLED DIESEL TANK95 S 95 30” 22” 22” 528 lbsOptional: #TDC-1 Tie-Down Cable Pair #SSV-1 Vent Cap
›› All Enviroslip tanks are Transport Canada registered ›› Baffled primary tank to reduce sloshing and rocking, ›› Pressure vacuum relief vent in filter box›› Extremely durable double walled design manufactured with 12 gauge P&O steel›› Lockable fill-spill box reduces fuel spillage when filling tank›› Triple-plate pump intake to minimize stress fractures (pump not included)›› Pump intake is fitted with pump mount suction tube with emergency valve›› Fusible plug, dipstick check, lifting eye, standard vent cap, hardware and instructions
Diesel Transfer Tanks - Poly›› Perfect size for your Truck (6 different sizes)›› Space-saving design fits in front of gooseneck trailer hitches›› Diesel-grade Polyethylene construction with drain bung›› Splash-resistant breather, fuel strainer under lid›› Dieselflo 10 GPM Pump with bypass valve and on/off switch›› 3/4” Auto shut-off nozzle to prevent overfilling›› Recommend ball baffles for maximum safety*
Under the LockableLid:›› 13’ flexible hose (3/4”) w/swivel to prevent tangles›› 13’ battery cables›› Earth strap to prevent static build up when filling ›› Auto shut-off nozzle to prevent overfilling and waste›› Lockable filler cap for security›› Fully enclosed pump compartment
Part# US Gallons DimensionsRDU025C10D 25Gal-Compact 31”L x 27”W x 20”H RDU055C10D 55 Gal-Compact 48”L x 34”W x 22”H RDU055S10D 55 Gal-Standard 32”L x 27”W x 30”H RDU0100S10D 100 Gal-Standard 47”L x 34”w x 34”H RDU075N10D 75 Gal-SLIMLINE 51”L x 21”W x 31”H RDU100N10D 100 Gal-SLIMLINE 51”L x 21”W x 38”H Optional Diesel Meter: #ARFD01 -Poly; measures gallons, quarts, liters-can be calibrated; LCD display (lithium battery), Max 145psi, (3-26gpm) Optional Ball Baffles: Reduce fluid movement in transit: Recommend 7.5” - 1 ball/2 gal; 14” - 1 ball/10 gal
SlimLine is a space-saving design
Product Code #DEF U.S. GallonsREU025C09S 25 Gal-Compact (31”Lx 27 w x 19”H)REU055C09S 55 Gal-Compact (31”L x 27 w x 29”H)REU075N09S 75 Gal-Narrow (51”L x 21 w x 31”H)REU100S09S 100 Gallon (48”L x 34”w x31”H)REU100N09S 100 Gal.-Narrow (51”L x 21”w x38”H)
DEF (Diesel Exhaust Fluid) Transport Tanks
FOB Factory*Enviroslip Double Walled Fuel Tanks*
Single-Walled (Green)
Double-Walled (yellow)
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 58 Phone for current pricing
Pond Filters, Check Valves and Ball Valves
Part # MPT 0.D x Leng.5473 2” 4¼” x 8”
Foot Valve Screen
Part # FPT PVC3181 1/2”PVC3182 3/4”PVC3183 1”PVC3184 1¼”PVC3185 1 ½”PVC3186 2”PVC3187 3”
PVC Ball Valve›› Max 150 PSI›› Temp 22°C (73°F)›› Maintenance free design›› EPDM rubber parts›› Slip valves available
Part # FPTValve7379 1/4”Valve7380 3/8”Valve7381. 1/2”Valve7382 3/4”Valve7383 1”Valve7384 1 ¼”Valve7385 1 ½”Valve7386 2”
Brass Ball Valve›› Max 150 PSI, Full Port›› Teflon packing›› Plastic coated handle›› Nickel-plated brass ball›› 600 PSI WOG
Part # Size. 9950-12060 12”X 2”H9950-12240 12” X 9”H6958 15”X 9”h
Tank Lid Basket 18Mesh
Part # FPT Length1001-05 1/2” 41/8”1001-07 3/4” 41/8”1001-10 1” 5 ¼”1001-12 1¼ 6 3/8
1001-15 1 ½” 6 3/8
1001-20 2” 7”1001-30 3” 8 5/8”
PVC Check Valve 1/2 lb spring
Part # FPT 3170 1/4” x 1/4”
PVC Ball Valve›› EPDM o-ring seals›› FDA grade PVC›› Max 250 PSI
›› External Seat
Part # Size 240-18 1/8” x 1/8” 240-14 1/4” x 1/4”
Drain CockPart # Size 7442 1/4” FPT X FPT7444 3/8” MPT x FPT7449 1/4” FPTx FPT
Chromed Brass Ball Valve ›› Max 300 PSI›› Max Temp. 100°C›› Nylon butterfly handle›› Teflon seat and viton seals
Part # FPT150SBS 1 ½”200SBS 2”300SBS 3”
Banjo Basket Strainer›› Poly construction›› For Lake or Dugout
Part # Description5446 Complete Unit5447 Replacement Bag
Kleenflow Intake Screen›› Large capacity 9” x 28”›› Vinyl coated metal cage›› Replaceable fiberglass screen›› 2” MPT›› For lake or dugout
Part # Size HBFLOAT Filter 7”x 8” 2”
Floating Pond Filter›› Self fill›› Poly, stainless steel
construction
Part # Size 243-18 1/8” x 1/8”
Drain Cock›› Internal Seat
Without check
Part # FPT1800-15 1 ½”1800-20 2”
Valve Screen ›› Use on any check valve with FPT intake
to convert to a foot valve
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
59 www.settermfg.comPricing can be found on-line
Agricultural Tanks and Accessories
Part # Imp. Gal. Diam. Height162-LR 250 Utility 65” 30”165-LR 420 Utility 65” 45”171-LR 915 (3 y/w) 86” 53”177-LR 1250 (Black) 86” 70”177-LR 1250(White) 86” 70”177-LR-HD 1250 (5 y/w) 86” 70”
*F.O.B. Winnipeg, MB (Minimum Freight Charge may apply)
›› Total block-out of sunlight ›› No algae growth ›› Food Grade
Part# U.S.GallonsLF02500DG 2500 Gallons TLF03200DG 3200 GallonsTLF0400DG 400 Gallon Pickup Tank
Horizontal Tanks (Liner Polyethylene)*
Part # Imp. Gal. Diam Length112-LR-LEG 100 29” 45”126-LR-LEG 175 38” 51”135-LR-LEG 325 42” 78”140-LR-LEG 500 48” 83”
Horizontal Free Standing Tanks*
Vertical Tanks*
Water Storage - Free Standing Tanks(Available in Black, Beige, Dk Green, Mist Green)
Flat Bottom Tanks
Transport Tanks - Freestanding and Sump BottomFreestanding Tanks—7 year warranty›› Heavy Walled, Premium A grade quality poly›› Smooth Tank wall allows ease of cleaning›› Can be Pin mounted, (pins not included)›› Stainless Steel lid with anti-spill seal›› 110 gallons to 4500 US gallons
Part # Imp. Gal. Diam Length102-LR 10 16” 19”103-LR 25 23” 18”105-LR 50 23” 37”111-LR 90 30” 49”115-LR 125 32” 55”125-LR 165 32” 71”133-LR 250 38” 72”139-LR 415 48” 74”140-LR 500 48” 83”Cone bottom TankSET25 25 24” 23”SET55 55 24” 49 ½”TANK66 66 32” 35”Tank Sump FittingPart # Inlet Suction DrainX200 3/4”MPT 1/2”FPT 1/2”FPT
Part# U.S. Gallons DimensionsTHV01000FG 1125 80”W x 65”HTHV01350FG 1530 85”W x 71”HTHV01550FG 1700 85”W X 80”HTHV01650FG 1731 90”W x 73”H
Many other sizes available
#THF02800FG 2800 gallons#AZP01 Optional Pins required
Sump Bottom Tanks—7 year warranty›› Heavy Walled, Premium A grade quality poly›› Sump allows liquids to completely drain ›› Optional Frame and Pins for mounting ›› 16” Stainless Steel Lid›› Green, Black, Yellow or White›› 110—2500 US gallons
#THD01900FG 1900 gallons without frame#THD01900KFG 1900 gallons WITH FRAME
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 60 Phone for current pricing
Tank Accessories, Wind Meters, Bin & Auger Alarms
›› Auger Module with cable and sensor easily mounts at Auger Spout›› Alerts the Wireless Remote Pager when the grain has reached the sensor›› High contrast Amber light and flashing Red Transport light- controlled by pager ›› Wireless Remote Pager beeps, Vibrates and Flashes when grain is at Sensor›› Pager reaches up to 300 feet (100 m) to module.›› Powered b y a 9 volt battery
Part# DescriptionGALA-100-300-00-AGMX Grain auger Level AlarmGALA100-301-00-AGMX Remote Pager
Powered by 6 V battery or external 12 V
›› #WM20: Wind speed, temperature, wind chill›› WM30: Wind speed,temp,wind chill, humidity, dew point›› WM40: Humidity, altitude, heat index, Barometric Pressure
Wind Meters
Saftifil Bin Level Indicator›› An effective simple mechanical system
to indicate when bin is filled to near capacity
›› Easy to install unit comes complete with brackets and reflective indicator
›› Uses heat and motion detection›› Detects animals as they enter the area›› Emits high pitched sounds and light to frighten intruder›› Automatically resets to guard against the next intrusion›› Pattern of sound and light is automatically varied each time
Critter Gitter - 9 Volt sounding device
Hypro Tank Agitator›› Flow: 7-16 gpm @ 40psi›› 3/4” MPT
Part # 3371-0019
›› Fluid driven rotation›› Teflon 1/2” FPT›› 360° (Max 300psi)
Part # 510120
Tank Rinsing NozzleTank Lids
Part # Size Description LID6973 6” Non-Vented (Twist-lock) LID6970 6” Vented Lid (Twist-lock) TL600C 5 ½” Threaded Lid (With Vent)LID6982 12” Vented Lid LID6979 15” Vented Lid LID6976 12” Lid with RimLID6977 15” Lid with RimLID-TL08-003 8” Hinged Lid with RimLID-TL12-006 12” Hinged Lid with RimLID-TL16-006 16” Hinged Lid with Rim
AgriMax Grain Auger Level Alarm
AgriMax Grain Bin Level Alarm Systems›› Each bin is equipped with Bin Alarm/Transmitter Socket permanently mounted to bin›› Two Level Sensors supplied with each socket and installed on outside of bin (7/16” hole)›› Audible alarm and flashing lights indicates when bin is almost full and when bin is full›› Two models: Manual shut-off model or Wireless Bin Alarm & Remote Pager model
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
61Pricing can be found on-line www.settermfg.com
Engines/Transfer Pumps
Part # DescriptionGX200-UTQH 6½ HP, RecoilGX200-UTQX6 6½ HP, Recoil, Oil AlertGX270-UQH26 9 HP, RecoilGX270-UQXE6 9 HP, Electic, Oil Alert
Part # DescriptionAdditive-4 4.2 oz (125ml)Additive-1 1 oz (28 ml)
Briggs & Stratton Gas Additive›› Preserves fuel up to 24 months
›› For 2 Cycle and 4 cycle engines
›› Keeps carb and fuel system clean
Part # HP DescriptionGX620UQXF6 20 Electric Start. O/AGX670UTXF 24 Electric Start. O/AMUFFLER Vertical Mt. (Extra) GTK-1 5 Gal. Tank w/mtg. bkt.
›› PowerPro engine
›› Overhead valve
›› Self priming with Oil Alert
›› Recoil or Electric start
›› Poly Pump
›› EDPM mechanical Seal
›› 6.5 HP: 5 Vane Impeller
›› Polyethylene cover with handle
›› Protect Engine/Pump from outdoor elements
›› Fits 13HP Engine, (Max.)
›› Dimensions: 20”W x 17”H x 14”D
Part# PumpCover
Part# DescriptionFM1010-1 CompressorFM101C Foam Chamber FM900F BootsFM200S Screen type SocsAM5005 Drop Hose
Part# DescriptionDyE Fluorescent Pink or Blue (1 L)AgriFoam 80-1 4 litre jug (80-1 Mix) AgriFoam 160-1 4 litre jug (160—1 Mix)AgriFoam Cleaner 4 litre jug Bio-degradable
neutralizes chemical
Foam Marker Parts, Foam and Dye
Part # Pump HP GPM (Max)1542P-65SP (2”) 6.5 2001543P-130ESP (3”) 13 440 (Electric Start)
3430-0692 3” Hypro PUMP 440 gpm (Max) 9243P-SP 3” Pedestal PUMP 460 gpm (Max)9243P-GM6-SP 3 HyDRAULIC 450gpm (Max)
PowerPro Trash Pump (MAX 50 PSI)Part# HP GPM (Max)1543A-TSP(3”) 6.5HP 272gpm (Includes Strainer, Hose Barbs and
Steel Frame)
Hypro Water Transfer Pumps
Honda GX200 & 270 Series
Honda GX340 & GX390 &SeriesPart # DescriptionGX340-U1QA6 11 HP, Oil AlertGX340-UQAE6 11 HP, Electric, Oil AlertGX390-UTQA6 13 HP, Oil AlertGX390-UQAE6 13 HP, Electric, Oil Alert
Honda GX620 & GX670 Series
Honda GX120 & 160 SeriesPart # DescriptionGX120-UTQ 4 HP - RecoilGX120-UTQX6 4 HP – Recoil, Oil AlertGX160-UTQH6 5½ HP-RecoilGX160-UTQX6 5½ HP-Recoil, Oil Alert
Engine/Pump Cover
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 62 Phone for current pricing
Hypro D30 and D503 Diaphragm Pump
Part # Item9910-D30 D30 Pump - 2 Diaphragm9910-D503 D503 Pump - 3 Diaphragm9910-Kit1640 Gear Reduction Kit (5.5HP required) Shaft: 3/4” (for D30 Pump)9910-KIT1642 Gear Reduction Kit (8-18HP required) Shaft: 1” (for D503 Pump)9910-HyD5312 Hydraulic Motor Mounting Flange Kit (1’ hollow shaft) (for D30 &D503 Pumps)
›› 3 Diaphragm pump›› Max 550 RPM, 580 PSI, Max 15.0 GPM›› 1 ¼” HB Inlet, ¾” NPT outlet›› Add gear reduction kit with 6:1 gear box for gas engine and
Mounting Flange Kit
SHURflo 12 Volt Pumps12V Model GPM PSI Switch Ports8000-541-250 1 45 Internal Bypass 3/8”FPT 8000-543-136 1.8 60 45 psi Demand 1/2” MPT2087-593-135 3 50 45 psi Demand 1/2 MPT2088-313-145 3.6 40 45 psi Demand 1/2”MPT2088-343-135 3.0 40 45 psi Demand 1/2”MPT2088-343-170 3.3 50 built–on/off power 1/2” MPT2088-443-144 3.5 45 45 psi demand 1/2” MPT5059-1311-D011 5 40 60 psi demand 1/2” MPT
›› High Volume ›› Use for Spot Spraying, Liquid
Fertilizer, planting, Transfer systems and General Purpose
›› Viton Valves, Santoprene Diaphragm
›› Self Priming up to 12’ with Built in Check Valve
FLOJET PumpsPart # GPM PSI Port Use2100-573A 1.2 50 3/8MPT Seed Treater with bypass2100-647A 1.1 50 3/8MPT Foam Markers4300-500A 3.5 45 1/2”FPT Chemical Transfer and High Volume Spraying4300-504A 4.8 35 3/4”FPT Chemical transfer and High Volume Spraying
›› Roller pump with 12 V motor, 1/2” Hollow shaft›› Super rollers with Viton seals›› Locking collar and torque arm›› Use for Chemical transfer, Herbicide banding and Fertilizer
placement
Part # Max GPM Max PSI4101N-EH 7.5 504101XL-EH 7.5 504101N-E2H 5.9 1004101XL-E2H 5.9 100
Hypro 4101 Roller Pump with 12 Volt DC Motor
Swivel Wing-Nut Pump FittingsPart# HB Size234-2916 3/8”234-2926 1/2”234-2936 5/8”234-2946 3/4”
Part# (elbow) 90°HB234-3916 3/8”234-3926 1/2”234-3936 5/8”234-3946 3/4”
Hypro Pump OilPart # Size2160-0048 2.5 Gal.2160-0038 1 Quart
12V and Diaphragm Pumps
Hypro D30 Diaphragm Pump Hypro D503 Diaphragm Pump›› 2 Diaphragm pump›› Max 550 RPM, 580PSI, Max 9.0 GPM›› 1” HB Inlet, 1/2” HB outlet›› Add gear reduction kit with 6:1 gear box for
gas engine and mounting Flange Kit
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
63 www.settermfg.comPricing can be found on-line
Ref.# Part # Description1. 6031-0258 Name Plate2. 2008-0001 Ball Bearing3. 2112-0003 Viton Seal4. 2210-005 Bolt5. 0200-1700C Endplate6. 1720-0099 O-ring Gasket7. 0300-1700C Rotor8. 0600-1502 Shaft9. 1610-0005 Key10. 2230-0018 Set Screw11. 1005-0005 Super Rollers12. 0100-1700C Body (Cast Iron) w/ seal
3
4
56
16
9
14
8
10
13
7A
2
312
117
9
810
215
1
See Page 17 for the proper coupler or adapter.
Repair Parts Kit No. 3430-0437 Consists of: (5) Ref. 11 Super Rollers, (1)Ref. 6 O-Ring Gasket, and (2) Ref. 3 Viton Seals.
Repair Parts Kit No. 3430-0383 (Universal) Consists of: (6) Ref. 11 SuperRollers, (2) Ref. 6 O-Ring Gaskets, and (2) Ref. 3 Viton Seals.
Repair Parts Kit No. 3430-0160 Consists of: (5) Ref. 11 PolypropyleneRollers and (1) Ref. 6 O-Ring Gasket, and (2) Ref. 3 Buna-N Seals.
8 1 0500-1502 Shaft Only9 1 1610-0005 Key
10 1 2230-0018 Set Screw10 1 2230-0034 Set Screw (SilverCast Only)
11 5 1005-0005 Super Roller (Standard)11 5 1002-0005 Polypropylene Roller (Optional) 11 5 1055-0005 Teflon Roller (Optional)12 1 0100-1700C Body (Cast Iron) with Seal12 1 0100-1700N Body (Ni-Resist) with Seal12 1 0100-1700X Body (SilverCast) with Seal
13 1 kit 3420-0010 Base Kit — Sold SeparatelyIncludes: (1) Base and (4) Bolts
14 1 2404-0191 1-1/4" Hose Barb15 1 2300-0020 Bearing Cover16 1 2300-0022 Shaft Bearing Cover
1 1 6031-0258 Name Plate (Specify Pump Model #)2 2 2008-0001 Sealed Ball Bearing
3 2 2112-0003 Viton Seal (Standard)3 2 2112-0001 Buna-N Seal (Optional)4 6 2210-0005 Bolt
5 1 0200-1700C Endplate (Cast Iron) with Seal5 1 0200-1700N Endplate (Ni-Resist) with Seal5 1 0200-1700X Endplate (SilverCast) with Seal6 1 1720-0099 O-ring Gasket for Endplate
7 1 0300-1700C Rotor (Cast Iron) with shaft (Std. Rotation)7 1 0300-1700N Rotor (Ni-Resist) with shaft (Std. Rotation)7 1 0300-1700X Rotor (SilverCast) with shaft (Std. Rotation)7A 1 0301-1700C Rotor (Cast Iron) w/shaft (Reverse Rot.)7A 1 0301-1700N Rotor (Ni-Resist) w/shaft (Reverse Rot.)7A 1 0301-1700X Rotor (SilverCast) w/shaft (Reverse Rot.)
Ref. Qty. PartNo. Req'd. Number Description
Ref. Qty. PartNo. Req'd. Number Description
IMPORTANT:
When ordering parts, give PARTNUMBER and PART DESCRIPTION.Reference Numbers are used ONLYto point out parts in the drawing andare NOT to be used as orderingnumbers.
Repair Parts Kit No. 3430-0161 Consists of: (5) Ref. 11 PolypropyleneRollers and (1) Ref. 6 O-Ring Gasket, and (2) Ref. 3 Viton Seals.
Repair Parts Kit No. 3430-0407 Consists of: (5) Ref. 11 Super Rollers,(1) Ref. 6 O-Ring Gasket, (2) Ref. 3 Viton Seals and (2) Ref. 2 Sealed BallBearings.
Models 1700C, 1700N, and 1700XL
14L-0100R (5/11, Rev. C)
Hypro 4101 Series Roller Pump for Spot Sprayers
Part/Model # Max GPM Max PSI Max RPM Rollers Type Ports6500C 22.0 300 1200 6 Cast iron 3/4” NPT6500N 22.0 300 1200 6 Ni-Resistant 3/4” NPT6500XL 22.0 300 1200 6 Silver Cast 3/4” NPT1005-0004 Replacement Super Rollers for 6500 series
Series 6500 Pumps›› 5/8” Solid Shaft ›› Super rotor, and rollers with viton seals
›› 4 Roller pump with super rollers ›› Viton seals ›› 3/4” NPT Ports, 5/8” Solid shaft
Part # Max GPM Max PSI Max RPM Type4101C 7.0 150 2600 Cast Iron4101N 7.0 150 2600 Ni-Resistant4101XL 7.0 150 2600 Silver Cast1005-0002 Replacement Super Rollers
Part/Model # Max GPM Max PSI Max RPM Rollers Type Ports7700C 22.4 200 800 7 Cast iron 3/4” NPT7700N 22.4 200 800 7 Ni-Resistant 3/4” NPT7700XL 22.4 200 800 7 Silver Cast 3/4” NPT1005-0004 Replacement Super Rollers for 7700 Series (#1002-0005– Poly Rollers)
Part/Model # Max GPM Max PSI Max RPM Rollers Type Ports1700C 45.0 200 1000 5 Cast iron 1” NPT1700N 45.0 200 1000 5 Ni-Resistant 1” NPT1700XL 45.0 200 1000 5 Silver Cast 1” NPT1005-0005 Replacement Super Rollers for 1700 Series
›› 15/16” Solid Shaft›› Super rollers
›› Viton seal in 1500XL, 1700, 7700›› Buna-N seals in 1500C, 1500N
Series 1500, 1700, 7700 Pumps
Part/Model # Max GPM Max PSI Max RPM Rollers Type Ports15002C 62.0 150 1000 6 Cast iron 1½” NPT 15002N 62.0 150 1000 6 Ni-Resistant 1½” NPT 15002XL 62.0 150 1000 6 Silver Cast 1½” NPT1005-0005 Replacement Super Rollers for 1500
Hypro Roller PumpSeries: 1700
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 64 Phone for current pricing
Hypro PTO Centrifugal Pumps*
Part/Model # Max GPM Max PSI Max RPM Description9006C-O 117 80 540 1 3/8” PTO Hub with Locking Collar/Clip9008C-O 110 70 1000 1 3/8” PTO Hub with Locking Collar/Clip9016C-O 117 80 540 1” Solid Shaft9018C-O 110 70 1000 1” Solid Shaft2120-0011 Viton Seal
Series 9000 Cast Iron Pumps›› Female PTO hub›› 1 ½” Inlet and 1¼” Outlet
Part/Model # Max GPM Max PSI Max RPM Description9006P-O 93 80 540 1 3/8” PTO Hub with Locking Collar/Clip9008P-O 86 70 1000 1 3/8” PTO Hub with Locking Collar/Clip9016P-O 93 80 540 1” Solid Shaft9018P-O 86 70 1000 1” Solid Shaft2120-0011 Viton Seal
Series 9000 Polypropylene Pumps›› Female PTO hub›› Viton Seals
Part/Model # Max GPM Max PSI Max RPM Description9202C 105 170 6000 1 ¼” Inlet 1” Outlet9203C 136 170 6000 1 ½” Inlet 1 ¼” Outlet9203C-R 136 170 6000 1 ½” Inlet 1 ¼” Outlet, clockwise rotation2120-0009 Viton Seal
Series 9200 Cast Iron Pedestal Mount Pumps›› 5/8” solid shaft and Viton shaft seal›› NPT Ports
Part/Model # Max GPM Max PSI Max RPM Description9205C 190 80 4200 2” Inlet 1 ½” Outlet2120-0011 Viton Seal
Series 9200 Cast Iron Pedestal Mount Pumps›› 7/8” solid shaft and Viton shaft seal›› NPT Ports
Part/Model # Max GPM Max PSI Max RPM Description9203P-S 100 80 4200 Designed for direct drive9500P-S 100 80 4200 Clockwise rotation2120-0011 Viton Seal
Series 9200/9500 Polypropylene Pedestal Pumps›› 7/8” solid keypad 316 Stainless steel shaft›› 1 ½” Inlet and 1¼” Outlet
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
65 www.settermfg.comPricing can be found on-line
Hypro Hydraulic Motor-Driven Centrifugal Pumps
›› 1 ½” Inlet and 1¼” Outlet NPT
Part/Model # Max GPM Max PSI System Description9303C-HM1C 114 130 Open/Closed 13 GPM hydraulic motor9303C-HM2C 97 95 Closed 6 GPM hydraulic motor9303C-HM3C 125 98 Large Open 24 GPM hydraulic motor9303C-HM4C 115 93 Open/Closed 7 GPM hydraulic motor2120-0009 Viton Seal
Series 9303 Cast Iron Pumps
Series 9303 Polypropylene Pumps
Part/Model # Max GPM Max PSI System Description9303P-HM1C 110 130 Open/Closed 13 GPM hydraulic motor9303P-HM2C 82 95 Closed 6 GPM hydraulic motor9303P-HM3C 110 93 Large Open 24 GPM hydraulic motor9303P-HM4C 82 85 Open/Closed 7 GPM hydraulic motor
›› 1 ½” Inlet and 1¼” Outlet NPT
›› 2 Inlet and 1½” Outlet NPT ›› 3U Pumps: 300 x 220 Universal Flange Ports
** Multi-Speed Coupler
Part# PTO RPM PTO Size Use with Series Spline Bore1321-0006 540 13/8” 6500 6 5/8”1321-0007 540 13/8” 1500, 1700, 7560, 7700 6 15/16”1321-0008 1000 13/8” 6500 21 5/8”1321-0009 1000 13/8” 1500, 1700, 7560 21 15/16”1323-0076** 540/1000 13/8” 1500,1700,7560,7700 6/21 5/8”1323-0077** 540/1000 13/8” 4000,6500 6/21 15/16”
Hypro Die Cast Quick Couplers
Part/Model # Max GPM Max PSI System Description9306C-HM1C 207 130 Open/Closed 13 GPM hydraulic motor9306C-HM3C 214 135 Open/Open 24 GPM hydraulic motor9306C-HM5C 212 140 Open/Closed 17 GPM hydraulic motor9306C-HM1C-3U 285 30 Open/Closed 13 GPM hydraulic motor2120-0009 Viton Seal discounted by Hypro—in stock)3430-0589 Mechanical Seal (Silicon Carbide)
Series 9306 Cast Iron Pumps
›› Hydraulic motor drive (for open center, closed center and load-sensing systems)
›› Pump Port Size: 3/4” NPT
›› Max. flow 20.1 gpm, 300 psi Max›› 1000 rpm, Max. 60°C fluid temp.›› 12 gpm Hydraulic Flow
Hydraulically-Driven Cast, Ni-Resist or Silver Series
Part# Description7560N-GM30 Ni-Resist (chemical resistant)7560XL-GM30 Silvercast (chemical resistant)7560N-GM15 Ni-Cast, 20.1 gpm, 300 psi (Hydraulic Fow Max: 6pgm, 23 lpm)
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 66 Phone for current pricing
9303C and 9303S Series Pumps
1 4 2406-0007 Drain/Vent Plug (9303C)1 4 2406-0016 Drain/Vent Plug (9303S)2 1 0150-9000C Pump Casing (Model 9303C)2 1 0150-9000S Pump Casing (Model 9303S)2A 1 0153-9000C Pump Casing (Universal Flange Model C-U)2A 1 0153-9000S Pump Casing (Universal Flange Model S-U)3 1 2253-0002 Impeller Nut (9303C)3 1 2253-0006 Impeller Nut (9303S) (sold in Parts Kit 3430-0825)4 1 0401-9100P Impeller (Nylon Std. 9303C)4 1 0402-9100P Impeller (Polypropylene Optional) (Std 9303S)5 1 1720-0083 O-ring6 1 1700-0100 Gasket7 1 2120-0009 Mechanical Seal (Viton/Ceramic) (Std 9303C)7 1 3430-0589 Mechanical Seal (Silicon Carbide) (Std 9303S)8 1 0750-9300C Mounting Flange (9303C)8 1 0756-9300S Mounting Flange (9303S)9 4 2210-0020 Hex Head Cap Screw (9303C)9 4 2210-0125 Hex Head Cap Screw (9303S)10 1 1410-0056 Slinger Ring11 1 1810-0014 Snap Ring12 1 1820-0013 Retaining Ring13 1 2000-0010 Ball Bearing14 1 1410-0131 Cartridge, Front15 2 1720-0268 O-ring16 1 2104-0010 Lip Seal (only sold in Parts Kit No. 3430-0748)17 1 1410-0130 Seal Spacer18 1 2029-0014 Thrust Bearing Assembly19 1 0531-2500 Shaft (HM2C/HM4C)19 1 0533-2500 Shaft (HM1C/HM5C)19 1 0536-2500 Shaft (HM3C)20 1 0150-2500C Motor Body (includes needle bearing)21 4 2210-0005 Hex Head Cap Screw22 2 1720-0110 O-ring23 1 1600-0045 Dowel Pin (HM2C / HM4C)23 1 1600-0044 Dowel Pin (HM1C/HM5C)
23 1 1600-0052 Dowel Pin (HM3C)24 1 1600-0042 Dowel Pin (HM2C / HM4C)24 1 1600-0037 Dowel Pin (HM1C/HM5C)24 1 1600-0068 Dowel Pin (HM3C)25 1 3900-0022 Gerotor (HM1C)25 1 3900-0023 Gerotor (HM2C)25 1 3900-0024 Gerotor (HM3C)25 1 3900-0025 Gerotor (HM4C)25 1 3900-0048 Gerotor (HM5C)26 1 0701-2500C1 Gerotor Housing (HM2C Models) 1/4” wide26 1 0700-2500C1 Gerotor Housing (HM1C Models) 1/2” wide26 1 0703-2500C1 Gerotor Housing (HM4C Models) 5/16” wide26 1 0702-2500C1 Gerotor Housing (HM3C Models) 1” wide26 1 0704-2500C1 Gerotor Housing (HM5C Models) 5/8” wide27 1 0254-2500C2 Motor End Plate (includes needle bearing)28 4 2270-0039 Washer29 4 2220-0045 Cap Screw (HM2C / HM4C Models)29 4 2220-0021 Cap Screw (HM1C Models)29 4 2220-0044 Cap Screw (HM3C Models)29 4 2220-0032 Cap Screw (HM5C Models)30 1 1720-0108 O-ring31 1 3360-0021A Pressure Port Adapter (includes o-ring)32 1 1720-0262 O-ring33 1 3320-0051A Tank Port Adapter (includes o-ring)34 1 3220-0029 Bypass Adjusting Screw35 1 1700-0047 Gasket36 1 2270-0027 Washer37 1 2250-0038 Lock Nut38 1 1610-0032 Roll Pin (HM2C / HM4C)38 1 1610-0031 Roll Pin (HM1C / HM5C)38 1 1610-0055 Roll Pin (HM3C)39 1 1810-0026 Snap Ring40 1 1610-0012 Woodruff Key (9303C)40 1 04432 Woodruff Key (9303S)
Ref. Qty.No. Req'd. Part No. Description
Ref. Qty.No. Req'd. Part No. Description
Parts Kit No. 3430-0748Contains: One each ball bearing(Ref. 13), motor shaft seal (Ref. 16),thread seal gasket (Ref. 35), twocartridge o-rings (Ref. 15) and washer(Ref. 36); two each motor housingo-rings (Ref. 22), and port adaptero-rings (Ref. 30 & 32).
Hydraulic Motor Part Nos.2500-0081C (HM1C Models)2500-0082C (HM2C Models)2500-0083C (HM3C Models)2500-0084C (HM4C Models)2500-0085C (HM5C Models)
Adapter Kit No. 3430-0187(HM2 and HM4 Models Only):Contains one each:No. 3360-0021 Pressure Port AdapterNo. 3373-0020 (Size #1)No. 3373-0021 (Size #2)No. 3373-0022 (Size #3).No. 1720-0108 Adapter O-ring andNo. 1720-0105 Orifice O-ring (Qty 3).
All 9303C and 9303S Series Pumps
NOTE: When ordering parts, giveQUANTITY, PART NUMBER,DESCRIPTION, and COMPLETEMODEL NUMBER. Referencenumbers are used ONLY to identi-fy parts in the drawing and areNOT to be used as order numbers.
Repair Parts Kit No. 3430-0332Contains: One o-ring (Ref. 5),one rubber gasket (Ref. 6),and one mechanical seal (Ref. 7).
Silicon Seal Kit No. 3430-0589Contains one each: 1720-0083 o-ring (Ref. 5) and one mechanical seal (siliconcarbide) (Ref.7).
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
67 www.settermfg.comPricing can be found on-line
9306 Series Pumps
1 4 2406-0007 Drain/Vent Plug (9306C)1 4 2406-0016 Drain/Vent Plug (9306S)2 1 0154-9200C1 Pump Casing (9306C)2 1 0154-9200S1 Pump Casing (9306S)2A 1 0157-9200C Pump Casing (Universal Flange 220x200)2B 1 0158-9200C Pump Casing (Universal Flange 300x220 Cast)2B 1 0158-9200S Pump Casing (Universal Flange 300x220 S.S.)3 1 2253-0002 Impeller Nut (9306C)3 1 2253-0006 Impeller Nut (9306S) (sold in Parts Kit 3430-0825)4 1 0401-9200P2 Impeller (Nylon Std. 9306C)4 1 0405-9200P2 Impeller (Polypropylene Optional) (Std. 9306S)4 1 0407-9306P Impeller (GTX Optional) 5 1 1720-0083 O-ring6 1 1700-0100 Gasket7 1 2120-0009 Mechanical Seal (Viton/Ceramic) (Std. 9306C)7 1 3430-0589 Mechanical Seal (Silicon Carbide) (Std. 9306S)8 1 0750-9300C2 Mounting Flange (9306C)8 1 0756-9300S Mounting Flange (9306S)9 4 2210-0020 Hex Head Cap Screw (9306C)9 4 2210-0125 Hex Head Cap Screw (9306S)10 1 1410-0056 Slinger Ring11 1 1810-0014 Snap Ring12 1 1820-0013 Retaining Ring13 1 2000-0010 Ball Bearing14 1 1410-0131 Cartridge, Front15 2 1720-0268 O-ring16 1 2104-0010 Lip Seal (only sold in Parts Kit No. 3430-0748)17 1 1410-0130 Seal Spacer18 1 2029-0014 Thrust Bearing Assembly19 1 0533-2500 Shaft (HM1C/HM5C)19 1 0536-2500 Shaft (HM3C)20 1 0150-2500C Motor Body (includes needle bearing)
21 4 2210-0005 Hex Head Cap Screw22 2 1720-0110 O-ring23 1 1600-0044 Dowel Pin (HM1C/HM5C)23 1 1600-0052 Dowel Pin (HM3C)24 1 1600-0037 Dowel Pin (HM1C/HM5C)24 1 1600-0068 Dowel Pin (HM3C)25 1 3900-0022 Gerotor (HM1C)25 1 3900-0024 Gerotor (HM3C)25 1 3900-0048 Gerotor (HM5C)26 1 0700-2500C1 Gerotor Housing (HM1C Models) 1/2” wide26 1 0702-2500C1 Gerotor Housing (HM3C Models) 1” wide26 1 0704-2500C1 Gerotor Housing (HM5C Models) 5/8” wide27 1 0254-2500C2 Motor End Plate (includes needle bearing)28 4 2270-0039 Washer29 4 2220-0021 Cap Screw (HM1C Models)29 4 2220-0044 Cap Screw (HM3C Models)29 4 2220-0032 Cap Screw (HM5C Models)30 1 1720-0108 O-ring31 1 3360-0021A Pressure Port Adapter (includes o-ring)32 1 1720-0262 O-ring33 1 3320-0051A Tank Port Adapter (includes o-ring)34 1 3220-0029 Bypass Adjusting Screw35 1 1700-0047 Gasket36 1 2270-0027 Washer37 1 2250-0038 Lock Nut38 1 1610-0031 Roll Pin (HM1C / HM5C)38 1 1610-0055 Roll Pin (HM3C)39 1 1810-0026 Snap Ring40 1 1610-0012 Woodruff Key (9306C)40 1 04432 Woodruff Key (9306S)41 1 2270-0071 Washer (9306C)
All 9306 Series
Ref. Qty.No. Req'd. Part No. Description
Parts Kit No. 3430-0748Contains: One each ball bearing (Ref. 13), motor shaft seal (Ref.16), thread seal gasket (Ref. 35),two cartridge o-rings (Ref. 15)and washer (Ref. 36); two eachmotor housing o-rings (Ref. 22), andport adapter o-rings (Ref. 30 & 32).
Ref. Qty.No. Req'd. Part No. Description
NOTE: When ordering parts,give QUANTITY, PART NUM-BER, DESCRIPTION, andCOMPLETE MODEL NUMBER.Reference numbers are usedONLY to identify parts in thedrawing and are NOT to beused as order numbers.
Hydraulic Motor Part Nos.2500-0081C (HM1C Models)2500-0083C (HM3C Models)2500-0085C (HM5C Models)
Repair Parts Kit No. 3430-0332Contains: One mechanical seal (Ref.7), one o-ring (Ref. 5) and one rubbergasket (Ref. 6).
Silicon Carbide Seal Kit No. 3430-0589Contains one each:mechanical seal (Ref. 7) and o-ring (Ref. 5).
-26-
2B
2A
2
3
4140
17151413
10 1112
1618
19
2021
22
2227
2930
31
333234
353637
28
23
2625
24
3938
4 5
6 78
9
1
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 68 Phone for current pricing
Ace Centifugal Pumps*
FMC-200-HYD-210 Cast Iron
Part # Ports Inlet Outlet FMC-200-HyD-210 FPT 2” 1½”
›› Cast Iron›› Driven by 10 GPM hydraulic motor›› Max PSI 80 PSO at 4400 RPM›› 180 GPM open discharge
Part # Ports Inlet OutletFMC-150 FPT 1½” 1¼”
FMC-150›› Counter clockwise rotation (5/8 shaft)›› Viton mechanical seal›› 100 GPM open discharge›› Max PSI 120 PSI at 6000 RPM
FMC-CW-150
Part # Ports Inlet OutletFMC-CW-150 FPT 1½” 1¼”
›› Clockwise rotation (5/8” shaft)›› Viton mechanical seal›› 75 GPM open discharge›› Max PSI 100 PSI at 5200 RPM
FMC-200-HYD-304 and Flanged
Part # Ports Inlet OutletFMC-200-HyD-304 FPT 2” 1 ½”FMC-200F-HyD-304 FPT 2” 1 ½”FMC-200SS-HyD-304 FPT 2” 1 ½” With Flanged 300SP 220FP
›› Cast Iron›› Driven by 11 GPM hydraulic motor›› Max PSI 120 PSO at 5100 RPM›› Equipped with restrictor orifice›› 200 GPM open discharge
FMC-150-HYD-206 and Flanged
Part # Ports Inlet OutletFMC-150-HyD-206 FPT 1 ½” 1 ¼” FMC-150F-HyD206SS FPT 1 ½” 1 ¼” (F-With Flanged 220/200 ss-Stainless internals)FMC-150F-HyD-206
›› Cast Iron›› Driven by 7 GPM hydraulic motor›› Max PSI 120 PSO at 5100 RPM›› Equipped with restrictor orifice›› 120 GPM open discharge
Replacement PartsPart # Description FitsBAC7V Viton Seal 1½”, 2”BAC-4-150 Body Seal O-Ring 1½”BAC-4A Body Seal O-Ring 2”BACH25 Key 1/8”x1/8”x1/2” 1½”, 2”BAC-26-HyD-Valox Impeller, valox 1½”, 2” with KeywayBAC-26-150-P Impeller, thermoplastic 1½” with KeywayBAC-6-HyD-SS Stainless Steel Shaft 5/8” 1½”, 2”RK-BAC-75-HyD Motor Repair Kit 1½”, 2”RK-FMC-150 Repair Kit for 150 SeriesBAC-75-HyD-310 Repair Kit for 310 SeriesBAC-26-150CI Impeller Cast 1½”BAC-26-200P Impeller Thermoplastic 2”BAC-26-200-CI Impeller Cast 2”
Part # Description41477 Spacer41476 Coil Ring, 12 Volt DC41479 5-¼” Pulley with Bearing and
Clutch Drive41475 Complete Clutch Assembly
Ace Magnetic Clutch Parts
›› Pumps 850 gallons per minute (51,000 gallons per hour)›› Light and Portable—one man operation›› Floats on Water›› With Optional auxiliary Fuel Tank—Pumps continuously for 12—15 hours between refueling
Part# DescriptionSFP-100 Self-priming Floating PumpFFT-100 Floating Auxiliary Fuel TankSPH-400 400’ Standard Pressure Hose (6”)HHD-100 Hose Hold-down Kit
WART HOG—Self-priming Floating Pump
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
69 www.settermfg.comPricing can be found on-line
AgCam Camera and Accessories
Part # Description DMAC-7M-C1 1- Camera, 7”MonitorDMAC-9M-C1 1- Camera, 9” MonitorTwo Camera Kits:DMAC-7M-C2 2- Cameras, 7” MonitorDMAC-9M-C2 2- Cameras, 9” MonitorTwo Camera Kit w/Quad MonitorDMAC-7MQ-C2 2– 7” w/built in QuadDMAC-9MQ-C2 2– 9” w/built in QuadMONITOR Only w/remote, A/C & 12V adaptersDMAC-7M 7” Monitor w/accessoriesDMAC-9M 9” Monitor w/accessoriesDMAC-7MQ 7” Monitor w/built in QuadDMAC-9MQ 9” Monitor w/built in Quad
›› View split screen, full screen images ›› Fully compatible with all AgCam and Ranch Hand ›› Keeps last image when video loss occurs›› Audio available on one channel
Part # Description DMAC-Q Quad includes AC Adapter
Full Colour Quad Processor
›› Monitor mount with dual articulation›› T-bolt suction cup mount
Part # DescriptionDMAC-PV-SM Suction Mount Base
DMAC-PV-PM Heavy duty Pedestal Monitor hard mount base
Monitor Mount Base
›› Cameras comes with standard lens 3.6mm›› Custom lens available (**) 2.8, 4.3, 6.8, 12 or 16
Part # TypeDMAC-RC AgCam Camera without cablesDMAC-C1 AG Camera with cables (20’ & 60’)
DMAC-C1-** Ag Cam with cables/ custom lensDMAC-RC** Ag Cam without cables/custom lens (see lens chart at www.agcam.com)DMAC-CT Pigtail for cameraDMAC-EC10 10’ Power/Video cable DMAC-EC20 20’ Power/Video Cable (standard)DMAC-EC30 30’ Power/Video Cable (standard)DMAC-EC40 40’ Power/Video Cable (standard)DMAC-EC50 50’ Power/Video Cable (standard)DMAC-EC60 60’ Cable/Video Cable (standard)DMAC-JCOC John Deer Command CenterDMAC-JD3C JD Greenstar 2630 adpt. (3)DMAC-CNH1 CNH Intelliview or AFS Pro (1)DMAC-CNH3 CNH Intelliview or AFS Pro (3)DMAC-TRIMBL-FMX for Trimble FmX & 750 monitorsDMAC-ACA-1 Air Seeder adapter w/ 1’ cableDMAC-ACA-6 Air Seeder adapter w/ 6’ cable
›› Omni-Directional Wireless Antennas
Part # Description SignalDMAC-WA5 5 DBI Incl. 6’ Cable 1/2 Mi. DMAC-WA8 8 DBI Incl. 20’ Cable 1.5+ Mi
Wireless Ranch Hand
›› Camera›› Monitor w/stand, Remote ›› 20’ and 60’ cables›› A/C & 12V power adapter›› Hardwire power adapters›› 2 Camera Kit includes: two
cameras, two- 60’ and two 2-20’ cables, one monitor
›› The Ag Cam system has the versatility and durability required for tough farm or ranch conditions
›› Cameras are housed in solid aluminum with a triple o-ring seal. Functions in any environment.
›› Cameras feature the Corning Photo-grey lens that adjusts to
changing light conditions. Auto infrared LED for night›› Monitor views from any angle.›› Air Seeder Adapter w/ 6’ cable available.›› Cameras: 3 year Warranty›› Monitors: 2 year Warranty
Wireless Antenna
Part # DescriptionDMAC-RHPAIR Transmitter and receiverDMAC-RHWPPAIR Waterproof Transmitter and Standard
ReceiverDMAC-RHWPTX Waterproof Transmitter DMAC-RHRX Standard ReceiverDMAC-RHTX Standard TransmitterDMAC-RHES Ranch Hand Easy Switch receiver with
4 channel dial
›› Optional wireless transmitter/receiver allows user to transmit images over 1500’- Line of sight required
›› Additional antennas are available to increase range
Camera Kits AgCam Cameras and Cables
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
Toll Free: 1-866-708-8902 70 Phone for current pricing
›› The Drylobag is a grain preservation system that aids in drying, aerating and long-term grain storage.
›› Easy & fast to assembly and a fraction of the cost of traditional bins.
›› Consists of a plastic polyethylene bag that will hold up to 200T grain.
›› Manufactured with airport pipes into which air is pumped and regulated
›› A standard bagging machine is used to fill the bags. ›› The structure is sealed and grains are dried by
using an aeration control system.
›› A fan pumps controlled air into the airport pipes and is evenly distributed through the grain to absorb moisture.
›› Moist air escapes through the outlet pipe on the opposite side of the main poly bag.
›› Once dried, the system doubles as a storage unit.›› Grain can be stored up to 18 months. ›› A standard de-bagging machine is used to remove
the grain from the bags.
Filling with a standard bagging machine Aeration Drying with fan Grain Bag Storage
Your Sprayer Parts DepotSETTER MANUFACTURING DIVISION
@SetterMFG
71 www.settermfg.comPricing can be found on-line
About Us
Return Policy
Setter Manufacturing Division has one of the largest selections of Sprayer Parts in Western Canada, many of which are not included in this catalogue.We try to maintain an adequate inventory but with supply and demand, shortages may occur.Prices on our website are current at the time of printing. However, prices may change at any time without notice or obligation. We have numerous suppliers who change prices at different times of year.Please confirm current price at time of order.Setter Manufacturing Division is an authorized Briggs and Stratton Warranty and Service Centre.We also offer: ›› Pump Repair* ›› Electronic repair services ›› A GPS techinician on staff ›› Customized sprayers manufactured to specifcations ›› Personalized assistance to repair or build your own sprayer * When bringing in pumps or engines for repair, remember to FLUSH AND DRAIN
›› Pre-authorized returns, accompanied by invoice›› Items must be returned within 30 days›› Items must be in resalable condition, in original pkg
›› 20% restocking fee may apply›› No returns on special ordered items›› No returns on cut hoses
Terms›› Orders must be placed by part number›› Payment by credit card or pre-payment cheque›› Orders can be faxed or emailed
›› FOB Russell, MB. ›› Special orders subject to additional freight charges
›› Shipping is available by Bus, Mail, Loomis and Purolator›› Mail shipments will be prepaid and charged at cost on invoice›› Loomis and Purolator require an account number prior to shipping
Shipping
Where to Find usSetter Manufacturing DivisionBox 686, 166125 Road 121 N. Russell, MB R0J1W0Phone: 204.773.2218Fax: 204.773.23751.866.708.8902www.settermfg.com Email: [email protected]›› All items subject to GST and PST where applicable›› Price subject to change without notice›› Not responsible for typographical errors
Your “One Stop” Sprayer Parts DepotHuge Selection of Sprayer Parts
www.settermfg.com Box 686, Russell, MB R0J1W0Phone: 204.773.2218Fax: 204.773.23751.866.708.8902
Division of Setter Triple S Ltd.
Proudly serving the Agriculture Industry for over 40 years
@SetterMFG
Setter Manufacturing DivisionSetter Manufacturing DivisionSetter Manufacturing Division