Spinal Cover fc only - QUIRURGICO / Instrumental Spinal.pdf · About this Edition The KMedic Spinal...

SpinalSourcebook

®

InstrumentsforSurgeons

KMedic

Founded in 1986 by HelmutKapczynski, KMedic is todaythe leading provider of ortho-pedic surgical instruments inthe United States. KMedic has achieved this position byfocusing its energies andwherewithal on orthopedicsurgical instruments. This consistent focus and commit-ment enables KMedic to provide the orthopediccommunity with an ever-increasing selection of fineinstruments that conform tothe highest standards ofprecision and reliability,consistency of pattern andlasting value.

KMedic’s Mission

KMedic aspires to be —and to be recognized bythe medical profession as — the best orthopedicsurgical instrument com-pany. We will achieve thisposition by passionatelypursuing excellence and by dedicating ourselves toimproving the quality of lifeof everyone who interactswith us, particularly those individuals who rely on ourproducts to heal and to cure.

KMedic and theOrthopedic Community

While our focus is on sup-plying the finest surgicalinstruments, we also seeourselves as part of thelarger orthopedic commu-nity. Toward that end, wecollaborate with surgeons todevelop innovative instru-mentation and applications.In addition, to promotefurther knowledge in ourfield, we support theOrthopaedic Research andEducation Foundation(OREF). As a proud memberof OREF’s CorporateAssociate Program – at theContributing Rank – weactively support its researchand educational programs.Through our involvementwith OREF, as well as otherprofessional organizationssuch as NASS, AORN,NAON, and NAOT, we’rehelping to advance theinterests of the OrthopedicCommunity.

i

KMedic Certified Instruments

KMedic is a company with a passion for excellence. Assuch, we are committed to “raising the bar” in every aspectof our business, from customer service to product devel-opment. With regard to instruments, this commitment takesthe form of superior products that perform impeccably. In order to provide surgeons with the tools they need tooperate with the utmost skill and confidence, we haveintroduced an instrument certifying process that is secondto none in the industry. See inside back cover.

Every step in the creation and distribution of KMedic-branded instruments — from material testing and crafting,to delivery and customer service — follows our exactingstandards. To achieve this level of excellence, we have a Quality Assurance Program that begins at the President’soffice and continues through every KMedic department,down to our loading dock. This program demands:

That quality is built into every product through excellentdesign and good manufacturing practices

Scrupulous adherence to our award-winning QualityAssurance Policy

The presence of German-trained quality assurance person-nel — including instrument makers, engineers and inspec-tors — to supervise prevention and verification activities

After more than a decade, the proven success of ourQuality Assurance Program enables us to “guarantee forlife” KMedic Certified Instruments.

The KMedic Guarantee

KMedic instruments are guaranteed for life againstmanufacturing defects of material and workmanship.This guarantee is void if instruments are not maintainedor repaired properly, or if they are not used for theirintended surgical purpose. Tungsten carbide inserts onscissors, needle holders and wire cutters are guaranteedfor three years. Replacement parts, such as springs, areguaranteed for one year.

�

�

�

ii

About this Edition

The KMedic SpinalSourcebook™ offerssurgeons more than 900patterns of the most popularand essential instruments forspinal procedures. ThisSourcebook is the onlyplace you’ll find the revolu-tionary CleanPunch™—thefirst kerrison that easily dis-assembles and reassemblesto ensure both a clean and asmooth cutting action. TheCleanPunch representsKMedic’s commitment toprovide innovative instru-ment solutions to the spinalcommunity.

Every instrument in thisSourcebook conforms to theuncompromising standardsthat characterize KMedicCertified Instruments.

Please keep in mind thatthe illustrations in thisSourcebook indicate generaldesign only. As instrumentmaking is characterized bycontinual refinement —subject to innovation andimprovement — we reservethe right to ship the mostmodern pattern of a giveninstrument.

In addition, measurementsgiven for overall length mayvary slightly because ofmetric conversion. Detaileddrawings marked 1/1 areapproximately the actualsize. Those marked 1/2 areapproximately one half theactual size.

Table of Contents

Introduction andMission Statement i

KMedic Certified andKMedic Guarantee ii

Ordering Information iv

Instrument Care and Longevity v-vi

Retractors 1

Elevators 17

Bone Curettes 27

Osteotomes 32

Chisels 34

Gouges 36

Mallets 38

Impactors and Tamps 39

Bone Cutting Forceps 42

Rongeurs 44

Spinal Rongeurs and Punches 50

Measuring Devices 73

Suction Tubes 74

K-Wire and Steinmann Pins 75

Wire, Pin and Rod Cutters 76

Pliers 82

Wire Tighteners 84

Rod Holders and Benders 85

SmartRacks® 88

Instrument Sets 91

Alphabetical Index 93

Numerical Index 95

iii

Ordering Information

KMedic Certified instruments and products may be orderedthrough an authorized distributor. For the KMedicDistributor serving your area, please call (800) 955-0559.

KMedic is now available in 70 countries around the globe.For the distributor serving your country, please call(201) 767-4002 or contact us on-line: www.kmedic.com.

When ordering, and to avoid substitutions, please specify theKMedic product number, as well as the product description.

Customer Service and Relations

If you have a question or problem regarding KMedic products or services, please don’t hesitate to either notifyyour distributor or to call KMedic at (800) 955-0559.Should you need to return an instrument, feel free tocontact either your KMedic Distributor or KMedic.

In addition to the KMedic Spinal Sourcebook™, we alsopublish the KMedic Orthopedic Sourcebook™, KMedicFoot and Ankle Sourcebook™ and the KMedic GeneralInstrument Sourcebook™. To obtain copies of these publi-cations, please contact KMedic directly.

Instrument Maintenance and Repair Program

The KMedic Instrument Maintenance and Repair Programis designed to keep your instruments in optimum workingcondition. By providing routine maintenance, this programhelps extend the life of your instruments and thereby saveson replacement and related costs.

Under this program, we will refurbish or repair KMedic and other high-quality instruments. Our services also include: precise sharpening, adjustments, refinishingand lubrication.

What’s more, we will complete most repairs within 3 to 5working days. If immediate attention is required, pleasecall us in advance, and ask for our Rush Service.

As part of this program, any KMedic instrument defectcovered by our guarantee will be replaced or repairedfree of charge. All our repair work is tested and guaran-teed to perform its intended tasks. If you are not com-pletely satisfied, we will rework the item at no charge.

For more information about our Repair Program or toreceive a price list, call (800) 955-0559.

iv

Instrument LongevityThrough Proper Care

Your purchase of KMedicinstruments represents a considerable investment.By following these guide-lines you will protect yourinvestment and ensure manyyears of productive and satisfactory performance.

Maintaining the Surface

KMedic Certified stainlesssteel surgical instrumentsare made of corrosionresistant, high-grade spe-cialty steels that are espe-cially selected to meet thevarying requirements ofcutting, clamping, retract-ing and chiseling.

A special characteristic ofthese steels is that theyform passive layers on theinstrument’s surface, whichprotect against corrosion.These layers act as an invis-ible patina and with repeat-ed use and exposure to air, the instrumentsbecome increasingly cor-rosion resistant.

While every effort is madeduring the manufacturingprocess to ensure thatinstruments are corrosionresistant, the real key tolongevity is proper mainte-nance. Toward that end,you must do your part bycaring for your instruments.In a sense, the name“stainless steel” is a misno-mer, one which should notbe taken literally. When notproperly treated, steel canrust or stain, reducing thelife of the instrument orrendering it useless. Thefollowing sections outlineproper instrument care.

New Instruments

Newly purchased instru-ments must be cleaned,lubricated and autoclavedimmediately before use.

Correct Use

Obvious as it sounds, itbears repeating: Instrumentsare designed for a particu-lar purpose and should beused only for that purpose.Even the strongest instru-ment can be damagedwhen used inappropriately,i.e., when a rongeur is usedto cut wire.

Water and Stainless Steel

Ordinary tap water containsminerals that can cause discoloration and staining.Therefore, we recommendthe use of distilled waterfor cleaning, disinfecting,sterilizing and rinsing instru-ments. To avoid staining,use a cleaning solution witha pH near neutral (7).

Manual Cleaning and Soaking

When handling instruments,be very careful not to damage their fine tips andmechanisms. If instru-ments have been exposedto blood, tissue, saline or other foreign matter, youmust rinse them in warm(not hot) water before thesesubstances are allowed to dry. After rinsing, im-merse them in a cleaningand disinfecting solution.

Because many compounds,including certain chemicals,are highly corrosive tostainless steel, rinse anddry instruments immediate-ly, in case they have comein contact with any poten-tially harmful substances.

If no ultrasonic cleaner isavailable, clean the instru-ment very carefully. Payparticular attention whencleaning boxlocks, ser-rations, hinges and otherhard-to-reach areas. Usenylon (not steel) brushes,such as KM 39-684, andwarm (not hot) cleaningsolutions. Follow the manu-facturer’s instructions forthe preparation of thecleaning solutions. Remem-ber to change thesesolutions daily.

Ultrasonic Cleaning

Ultrasonic is the mosteffective and efficient wayto clean your instruments.To maximize its effective-ness, your instrumentsshould be cleaned of allvisible debris before theyare put into an ultrasoniccleaner. Please note thatchrome-plated instrumentsmay rust if they are notdried and lubricated imme-diately after sterilization. In addition, we recommendthe following:

Do not mix dissimilar met-als, i.e., chrome and stain-less, in the same cycle.

Open all instruments soratchets and boxlocks are accessible.

Avoid piling instrumentson top of each other whenloading.

Remove and rinse off in-struments immediatelyafter the cycle is finished.

Dry instruments immedi-ately after rinsing and allowthem to air-dry thoroughly.

Lubricate all moving parts.

v

�

�

�

�

�

�

vi

Instrument Checkup

The best time to review thecondition of your instru-ments is after they havebeen cleaned and lubri-cated and have cooled off.Consider the following:

Function:Scissors must cut cleanlyand close properly. Needleholders and clamps mustengage properly and meetcorrectly at the tips.

Surface:Carefully inspect surfacesfor any sign of staining,cracking or other irregulari-ties. Common sources ofstaining are:

Inadequate cleaning

Mixing dissimilar metals

Impurities in the water

Unsuitable or improperpreparation and usage ofcleaning and disinfecting or maintenance agents

Non-compliance with oper-ating procedures of cleaningand sterilizing equipment

Lubrication andAutoclaving

All instruments must beproperly cleaned beforeautoclaving. Then theirmoving parts, such as box-locks and hinges, shouldbe well lubricated.Be careful to use surgicallubricants and not indus-trial oils. Always sterilizeinstruments in the open,unlocked position. We recommend that instru-ments be wrapped in clothand then placed in thecontainer, or that a clothbe put on the bottom ofthe pan to absorb moisture.The cloth should be pH(7)neutral and have no residueof detergents. Finally,avoid sudden cooling ofyour instruments.

Cold Sterilizing orDisinfecting

Prolonged immersion indisinfecting or sterilizingsolution can damage yoursurgical instruments.We recommend that you donot soak your instrumentsfor longer than 20 minutes.To render the instrumentssterile and ready for use, usean autoclave cycle.

Caution: Instruments with tungstencarbide inserts, such aswire cutters, needle holdersand TC scissors, shouldnever be immersed in ster-ilizing solutions containingBenzyl AmmoniumChloride (BAC). BAC willsoften and dissolve thetungsten carbide.

Never use bleach as it willcause severe pitting.

Storage

Once your instruments arethoroughly dry, store themin a clean, dry environ-ment. Never put them inareas where chemicals may emit corrosive vaporsor where temperature and moisture variationscould cause condensationon the instruments.

KMedic Instrument Care Checklist

1. Rinse and soak soiled in-struments immediatelyafter use. Thoroughlyclean before autoclaving.

2. Autoclave and sterilizeinstruments in an openposition.

3. Do not stack or entangle instruments.

4. Follow recommenda-tions made by equip-ment and solutionsmanufacturers.

5. Keep instruments properly lubricated.

6. Inspect instruments regularly.

7. If you experience aproblem, at any stage of the instrument caring process, pleaseconsult with yourKMedic Distributor.

�

�

�

�

�

�

�

KMedic: In the Tradition of the Masters

Instrument making is a highly developed craft, and thecraftspeople who make KMedic surgical instruments arethe modern heirs to this ancient art. It is also a vocationthat has respected its traditions over the centuries. So, while new techniques have kept pace with advances insurgical practices, the essence of the craft has changedvery little. Today, computers and other advanced techno-logy aid in the manufacture of instruments, but it remainsthe skills of gifted instrument makers that turn raw steelinto the finely honed tools...ready for the surgeon’s hand.

An Extension of the Hand

At KMedic we see instruments as an extension of a surgeon’shand. It is with this relationship in mind that we selectthe instruments offered in this Sourcebook. We demandfrom our instrument makers: precision and reliability, consistency of pattern and uniform surface, all at a goodvalue. To ensure this level of quality, every one of our suppliers must meet our Quality Assurance Program. Onlywhen they have met these strict standards do we qualifyan instrument as KMedic Certified.

The idea that the instrument is an extension of the hand is more than a romantic notion at KMedic. It is directlyrelated to superior performance. When you work with aKMedic instrument, you’ll find it satisfies on many levels.First, like any well-crafted tool, it feels very good in your hand. What’s more, it functions extremely well. Taken together these two feelings translate into greaterconfidence and ease.

Evolving Tradition

As we’re all aware, new surgical techniques create a con-tinual need for improvements, as well as for the introduc-tion of entirely new instruments. KMedic responds tothese needs by forming partnerships with leading surgeons.

In the belief that closer communication will lead to furtheradvancements, we invite you to call, or to e-mail us, andshare your ideas for new and/or improved instrumentation.We look forward to hearing from you.

Helmut KapczynskiPresident & CEOKMedic, Inc.

vii

®

SpinalSourcebook

Instruments for Surgeons

RETRACTORS

®

1

SENN RETRACTOR 61⁄4�KM 52-0883 sharp prongsdouble ended9mm width x 7mm depth prongsand 7mm width x 18mm depth blade

KM 52-0903 blunt prongsdouble ended9mm width x 7mm depth prongsand 7mm width x 18mm depth blade

KM 52-088 KM 52-090

1/11/1

1/1

LITTLE RETRACTORKM 51-52073⁄4�13mm width x 15mm depth blade

1/1

BLADE RETRACTOR 71⁄2�KM 55-420 KM 55-421 KM 55-42218mm width 20mm width 23mm widthx 76mm depth blade x 76mm depth blade x 76mm depth blade

RETRACTORS

®

2

LOVE NERVE RETRACTOR 81⁄2�7mm width x 5mm depthKM 51-530 straight blade KM 51-532 blade angled 45 degrees KM 51-534 blade angled 90 degrees

1/1

SCOVILLE NERVE ROOT RETRACTOR 91⁄4�angledKM 55-426 8mm bladeKM 55-428 13mm blade

HOLSHER NERVE RETRACTOR 91/2�KM 48-234 7mm bladeKM 48-237 9mm blade

KM 48-237Primarilyused to retractthe nerve root.Blunt hook.

KM 48-234

1/1

1/1

NERVE ROOT RETRACTOR OFFSETKM 55-4249�6mm blade

Retractor bladelies on same planeas surgeon’s finger.

Gives surgeonunobstructed view.

1/1

KM 55-426

1/1

RETRACTORS

®

3

VOLKMAN RETRACTOR 81⁄2� with ring handle

sharpKM 52-254 1 prong 10mm depthKM 52-258 2 prongs 8mm width x 10mm depthKM 52-262 3 prongs 13mm width x 10mm depthKM 52-264 4 prongs 18mm width x 10mm depthKM 52-266 6 prongs 28mm width x 10mm depth

bluntKM 52-268 2 prongs 8mm width x 10mm depthKM 52-272 3 prongs 13mm width x 10mm depthKM 52-274 4 prongs 18mm width x 10mm depthKM 52-276 6 prongs 28mm width x 10mm depth

sharp

blunt

1/2

1/2

CUSHING VEIN RETRACTORKM 51-5219� with fenestrated handle12mm width x 10mm depth blade

1/1

CUSHING DECOMPRESSION RETRACTORKM 55-30483⁄4� with fenestrated blade and handle13mm width x 22mm depth blade

RETRACTORS

®

4

U.S. ARMY RETRACTORKM 51-37281/2� double ended, set of two smaller: 15mm width x 25mm depthand 15mm width x 30mm depthlarger: 15mm width x 37mm depthand 15mm width x 42mm depth

HIBBS RETRACTOR 91⁄2�sharp teethKM 51-059 25mm width x 50mm depthKM 51-060 26mm width x 75mm depthKM 51-061 25mm width x 100mm depth

Used for deep softtissue retraction

MEYERDING LAMINECTOMY RETRACTOR sharp teeth

bladewidth

KM 51-1589� small 17mm 55mm

KM 51-1629� medium 25mm 70mm

KM 51-16410� large 50mm 94mm

TAYLOR SPINAL RETRACTORKM 52-45871⁄4�11⁄4� width x 3� length blade

KM 52-4608�11⁄4� width x 4� length blade

KM 52-458

1/1

SELF-RETAINING RETRACTORS

®

5

JANSEN RETRACTORKM 52-4224�3x3 blunt prongs

1/1

GELPI RETRACTORsharp points blunt pointsKM 52-776 31⁄2� KM 52-770 71⁄2�KM 52-778 41⁄2�KM 52-780 51⁄2�KM 52-768 71⁄2�

GELPI-SELETZ RETRACTORKM 52-76561⁄4�sharp pointsdeep blades

KM 52-7781/1 1/1

KM 52-770

1/1 1/1

SNITMAN ENDAURAL RETRACTORKM 55-49741⁄4�3x3 sharp prongs10mm depth x 14mm height

1/1


®

6

TISSUE RETRACTORKM 55-43851⁄4�1x1 blunt prongs13mm depth

GELPI RETRACTORKM 52-7697� with ball stopssharp points

WILTSE-GELPI RETRACTORKM 52-77111�deep bladessharp points

1/1 1/11/1 1/1

SCALP CONTOUR RETRACTORKM 52-54851⁄2�3x4 sharp prongs15mm depth x20mm height

KM 52-54651⁄2�3x4 blunt prongs15mm depth x20mm height

Handle conforms tocontour of skull.

KM 52-548

1/1

1/1


®

7

WEITLANER RETRACTORKM 52-4924� sharp2x3 prongs13mm depth x13mm height

KM 52-4944� blunt2x3 prongs13mm depth x13mm height

KM 52-4921/1

1/1KM 52-494

WEITLANER RETRACTOR

sharp3x4 prongsKM 52-498 51⁄2� 14mm depth x 18mm height KM 52-502 61⁄2� 15mm depth x 20mm height KM 52-504 8� 16mm depth x 20mm height KM 52-506 91⁄2� 23mm depth x 21mm height

blunt3x4 prongsKM 52-518 51⁄2� 14mm depth x 18mm height KM 52-522 61⁄2� 15mm depth x 20mm height KM 52-524 8� 16mm depth x 20mm height KM 52-526 91⁄2� 23mm depth x 21mm height

KM 52-498 KM 52-518

KM 52-506

KM 52-526

1/1

1/1

1/11/1


®

8

BECKMAN-WEITLANER RETRACTOR hinged blades3x4 sharp prongsKM 52-530 51⁄2� 15mm depth x 20mm height KM 52-532 61⁄2� 15mm depth x 20mm height KM 52-534 81⁄2� 17mm depth x 22mm height KM 52-542 91⁄2� 24mm depth x 22mm height

3x4 blunt prongsKM 52-536 51⁄2� 15mm depth x 20mm height KM 52-538 61⁄2� 15mm depth x 20mm height KM 52-540 81⁄2� 17mm depth x 22mm height KM 52-544 91⁄2� 24mm depth x 22mm height

KM 52-532 KM 52-538

ADSON RETRACTORKM 52-44271⁄2� straight4x4 sharp prongs18mm depth x 18mm height

ADSON RETRACTORKM 52-44471⁄2� angled4x4 sharp prongs18mm depth x 18mm height

1/1 1/1


®

9

D’ERRICO-ADSON RETRACTORKM 55-49873⁄8�4x4 sharp prongs22mm depth x 19mm height

1/1

MISKIMON CEREBELLUM RETRACTORKM 55-49971⁄2�7x7 sharp prongs35mm depth x 32mm height

Angular prongs areheavier than those

on a standardAdson.

MARKHAM-MEYERDINGHEMILAMINECTOMY RETRACTOR 7�KM 55-440 KM 55-441Left sharp blade Right sharp blade (pictured)60mm depth x 60mm depth x25mm height 25mm height

1/1

1/1KM 55-432

MEYERDING LAMINECTOMY RETRACTOR 61⁄2�sharp bladesKM 55-430 KM 55-431 KM 55-43257mm depth 51mm depth 41mm depthx 25mm height x 25mm height x 25mm height

1/1


®

10

BECKMAN-ADSON LAMINECTOMY RETRACTOR 121⁄4� with hinged blades

KM 52-490 KM 52-484

KM 52-486 KM 52-488

sharp4x4 prongsKM 52-490 25mm depth x 25mm height KM 52-486 44mm depth x 25mm heightmaximum opening: 511/16�

blunt4x4 prongsKM 52-484 25mm depth x 25mm heightKM 52-488 44mm depth x 25mm heightmaximum opening: 6�

1/1 1/1

1/1 1/1


®

11

BECKMAN RETRACTORKM 52-470121⁄4� with hinged blades 4x4 sharp prongs17mm depth x 27mm heightmaximum opening: 67/16�

ADSON RETRACTORKM 52-474121⁄2� with hinged blades4x5 blunt prongs25mm depth x 37mm heightmaximum opening: 615/16�

KM 52-472121⁄4� with hinged blades4x4 blunt prongs17mm depth x 27mm heightmaximum opening: 67/16�

KM 52-470

1/1

1/1


®

12

BECKMAN-EATON RETRACTORKM 52-476121⁄2�hinged blades7x7 sharp prongs45mm depth x 45mm heightmaximum opening: 63/16�

1/1


®

13

LAMINA SPREADERKM 48-226101⁄2�flat bladesmaximum blade opening: 2� (50mm)

LAMINA SPREADERKM 48-228101⁄2�concave blades maximum blade opening: 2� (50mm)

KM 48-217

INGE RETRACTORKM 48-21761⁄2� with teethKM 48-21861⁄2� without teeth

KM 48-23091⁄2� with teeth

Available with or without teeth.

KM 48-230

1/1

1/1

1/1

1/1

1/1

1/1


®

14

CERVICAL RETRACTOR SETKM 55-4807 pairs of blunt blades and body

Set includes:KM 55-481 Cervical Retractor Body, small, 6�KM 55-482 25mm blade depthKM 55-483 30mm blade depthKM 55-484 35mm blade depthKM 55-485 40mm blade depthKM 55-486 45mm blade depthKM 55-487 50mm blade depthKM 55-488 55mm blade depth

1/1

1/1

LUMBAR LAMINA SPREADERKM 55-495 #1 KM 55-496 #2arm length: 31⁄2� arm length: 41⁄4�spread: 11⁄2� spread: 11⁄8�

VERTEBRA SPREADERKM 55-490 #1 with ratchet5�spread: 3⁄4�

KM 55-485


®

15

SCOVILLE BLADES, hook styleKM 55-447 2� depth (51mm)KM 55-448 3� depth (76mm)KM 55-449 2� depth (51mm), with cross barKM 55-450 23⁄4� depth (70mm), with cross bar

SCOVILLE BLADES, solidKM 55-451 1� width x 21⁄2� depth (25mm x 64mm)KM 55-452 2� width x 21⁄2� depth (51mm x 64mm)KM 55-453 11⁄8� width x 25⁄8� depth (29mm x 67mm)KM 55-454 1� width x 31⁄2� depth (25mm x 89mm)

SCOVILLE BLADES, 4 prongKM 55-456 11⁄2� width x 15⁄8� depth (38mm x 41mm)KM 55-457 17⁄8� width x 25⁄8� depth (48mm x 67mm)

MEYERDING BLADESKM 55-458 1� width x 21⁄4� depth (25mm x 57mm)KM 55-459 1� width x 3� depth (25mm x 76mm)KM 55-460 2� width x 31⁄2� depth (51mm x 89mm)

SCOVILLE HEMILAMINECTOMY RETRACTOR BODYKM 55-445spread: 63⁄4�arm length: 51⁄2�

HAVERFIELD-SCOVILLE HEMILAMINECTOMY RETRACTOR BODYKM 55-446spread: 71⁄4�arm length: 53⁄4�, hinged


®

16

FRAZIER LAMINECTOMY RETRACTORKM 52-7023x4 blunt prongsspread: 31⁄2�arm length: 5�

HIBBS BLADESKM 55-461 1� width x 2� depth (25mm x 51mm)KM 55-462 2� width x 2� depth (51mm x 51mm)KM 55-463 1� width x 21⁄2� depth (25mm x 64mm)KM 55-464 11⁄2� width x 21⁄2� depth (38mm x 64mm)KM 55-465 1� width x 3� depth (25mm x 76mm)KM 55-466 11⁄2� width x 3� depth (38mm x 76mm)KM 55-467 2� width x 3� depth (51mm x 76mm)KM 55-468 1� width x 4� depth (25mm x 102mm)KM 55-469 2� width x 4� depth (51mm x 102mm)

TAYLOR SPINAL BLADESKM 55-471 11⁄4� width x 3� depth (32mm x 76mm)KM 55-472 11⁄4� width x 4� depth (32mm x 102mm)

TAYLOR LAMINECTOMY BLADE, 3 prongKM 55-473 11⁄2� width x 13⁄4� depth (38mm x 44mm)

TAYLOR LAMINECTOMY BLADES, 4 prongKM 55-474 2� width x 17⁄8� depth (51mm x 48mm)KM 55-475 21⁄2� width x 21⁄2� depth (64mm x 64mm)KM 55-476 21⁄4� width x 31⁄8� depth (57mm x 79mm)

ELEVATORS

®

17

FREER ELEVATORKM 57-61471⁄2� double ended5mm sharp endand 5mm blunt end

1/1

1/1

SACHS NERVE ELEVATORKM 57-61871⁄2�3mm blunt

1/1

KLEINERT KUTZELEVATOR AND DISSECTORKM 57-61573⁄4�2mm x 3mm sharp ends

1/1

1/1

WOODSON DURAL SEPARATOR AND PACKERKM 55-3027� double ended with grooved blade3mm blunt end

WOODSON ELEVATOR AND SPATULAKM 55-30010� double ended3mm semi-sharp ends

1/1

1/1

ELEVATORS

®

18

RHOTON MICRO DISSECTION INSTRUMENTS 71⁄2�KM 55-330 Round Dissector 1mm, angledKM 55-331 Round Dissector 2mm, angledKM 55-332 Round Dissector 3mm, angledKM 55-333 Elevator, curvedKM 55-334 Elevator, angledKM 55-335 Spatula Dissector #6 small, angledKM 55-336 Spatula Dissector #7 medium, angledKM 55-337 Spatula Dissector #8 large, angledKM 55-338 Hook, 90° angle, sharpKM 55-339 Hook, 90° angle, bluntKM 55-340 Hook, 45° angle, sharpKM 55-341 Needle, straight, sharpKM 55-342 Micro Curette, straight, 1mm x 2mmKM 55-343 Micro Curette, angled, 1mm x 2mmKM 55-344 Ball-tipped Dissector, 0.8mmKM 55-345 Ball-tipped Dissector, 90° angle, 3mmKM 55-346 Ball-tipped Dissector, 90° angle, 5mmKM 55-347 Ball-tipped Dissector, 40° angle, 4mmKM 55-348 Ball-tipped Dissector, 40° angle, 8mm

KM 55-330KM 55-331KM 55-332

KM 55-333 KM 55-334 KM 55-335KM 55-336KM 55-337

KM 55-338

KM 55-339 KM 55-340 KM 55-341 KM 55-342KM 55-343

KM 55-344 KM 55-345KM 55-346

KM 55-347KM 55-348

Detail drawings not to scale.For identification only.

ELEVATORS

®

19

KM 57-624style #17� double ended

KM 57-626style #273⁄4� double ended

PENFIELD ELEVATORSKM 57-628style #373⁄4� double ended

KM 57-630style #48� single ended

1/1

1/1

1/1 1/1

1/1

KM 57-632style #571⁄2� double ended

ELEVATORS

®

20

NERVE PROBE endoscopic15� with ball end and stainless steel handle31⁄2� tip and shaft length111⁄2� handle length.280� (7.1mm) shaft diameter

PENFIELD ELEVATOR endoscopicKM 55-65415� blunt with stainless steel handle.16� (4mm) tip width31⁄2� tip and shaft length, graduated111⁄2� handle length.280� (7.1mm) shaft diameter

SMITHWICK HOOK AND DISSECTORKM 49-32012� double ended5mm semi-sharp endand 1x10mm blunt hook

1/1

1⁄11⁄1

1⁄1

KM 55-662angled 45°


ELEVATORS

®

21

ADSON PERIOSTEAL ELEVATOR 63⁄4�KM 49-310 sharp 7mm straightKM 49-311 blunt 7mm curvedKM 49-313 semi-sharp 7mm straight KM 49-312 semi-sharp 7mm curved

KM 49-310 KM 49-311

KM 49-313 KM 49-312

1/1 1/1

1/1 1/1

KEY PERIOSTEAL ELEVATOR sharp edgeKM 46-258 7� 1⁄4� widthKM 46-260 71⁄2� 3⁄8� widthKM 46-262 71⁄2� 1⁄2� widthKM 46-264 8� 3⁄4� widthKM 46-266 81⁄4� 1� width

KM 46-258 KM 46-262

KM 46-264 KM 46-266

1/1 1/1

1/1 1/1

Also knownas JosephElevator.

CARROLL PERIOSTEAL ELEVATORKM 55-30651⁄2� sharp, double ended3mm round end and 10mm flat end

1/1

1/1

ELEVATORS

®

22

CUSHING PERIOSTEAL ELEVATOR 71⁄2�

KM 49-32215mm sharpcurved edge

KM 49-32415mm sharpstraight edge

1/1 1/1

LANGENBECK PERIOSTEAL ELEVATOR 73/4�

KM 46-2226mm narrowblunt edge

KM 46-22417mm broadsharp edge

1/11/1

1/1KM 49-32615mm serratedcurved edge

ELEVATORS

®

23

KM 49-3441�

KM 49-34611/4�

COBB SPINAL ELEVATOR 91/2� sharpwith hexagonal handleall stainless steel

1/1 1/1

1/1 1/1

KM 49-3423/4�

KM 49-3401/2�

ELEVATORS

®

24

COBB SPINAL ELEVATOR 11� sharpall stainless steelAlso available with stainless steel working endand aluminum handle.

KM 46-414S1⁄2�all stainless steel

KM 46-4141⁄2�aluminum handle





KM 46-418S1�all stainless steel

KM 46-4181�aluminum handle



SmartRack® for 11� Cobb Elevatorsshown on page 89 (KM 98-170).

1/1 1/1 1/1

1/1 1/1

ELEVATORS

®

25

KM 55-62017� sharp1⁄4� (6mm) tip width2.7� tip length9.3� shaft length5� handle length.285� (7.2mm) shaftdiameter

KM 55-61020� sharp1⁄4� (6mm) tip width31⁄2� tip length10� shaft length61⁄2� handle length.45� (11.5mm) shaftdiameter

KM 55-61220� sharp3⁄8� (10mm) tip width31⁄2� tip length10� shaft length61⁄2� handle length.45� (11.5mm) shaftdiameter

KM 55-61420� sharp.490� (13mm) tip width31⁄2� tip length10� shaft length61⁄2� handle length.45� (11.5mm) shaftdiameter

COBB SPINAL ELEVATOR endoscopicwith phenolic handlegraduated tips

1⁄1 1⁄1

1⁄1 1⁄1

Phenolic handlesare autoclavable

to 290°F (143°C)

Longer phenolic handle providestwo-handed control for better leverage.

ELEVATORS

®

26



RIB ELEVATOR endoscopic17� sharp with phenolic handle9mm radius tip4� tip length8� shaft length5� handle length.45� (11.5mm) shaft diameter

1⁄1

1⁄1


to 290°F (143°C)

HARRINGTON SPINAL ELEVATORKM 55-79812� sharp3⁄4� (19mm) tip widthall stainless steel

1⁄1

CURETTES

®

27

BRUN (SPINAL FUSION) CURETTE with hollow handle, oval cup

7� straightKM 46-511 #5/0KM 46-512 #4/0KM 46-513 #3/0KM 46-515 #2/0KM 46-517 #0KM 46-519 #1KM 46-521 #2KM 46-523 #3KM 46-525 #4KM 46-529 #5KM 46-531 #6

9� straightKM 46-563 #3/0KM 46-564 #2/0 KM 46-565 #0KM 46-566 #1 KM 46-567 #2 KM 46-568 #3KM 46-569 #4 KM 46-570 #5KM 46-571 #6

9� angled 45°KM 49-110 #3/0KM 49-111 #2/0KM 49-112 #0KM 49-113 #1KM 49-114 #2KM 49-115 #3KM 49-116 #4KM 49-117 #5KM 49-118 #6

SmartRack® for 7 � Brun Curettesshown on page 89 (KM 98-160).SmartRack® for 9 � Brun Curettesshown on page 89 (KM 98-180).

Also known as Spratt Curette

1/1

1/1

5/0 4/0 3/0 2/0 0 1

2 3 4 5 6

BRUN (SPINAL FUSION) CURETTE 9� with solid hexagonal handle

straightKM 46-551 #3/0 KM 46-552 #2/0 KM 46-553 #0 KM 46-554 #1 KM 46-555 #2 KM 46-556 #3 KM 46-557 #4 KM 46-558 #5 KM 46-559 #6

angled 45°KM 49-150 #3/0 KM 49-151 #2/0 KM 49-152 #0 KM 49-153 #1 KM 49-154 #2 KM 49-155 #3 KM 49-156 #4 KM 49-157 #5 KM 49-158 #6

202/03/0

3 4 5 6

1

SmartRack® for 9 � Brun Curettes shown on page 89 (KM 98-180).

1/1

1/1

CURETTES

®

28

EPSTEIN CURETTE 8� with hollow handleKM 49-580 #000KM 49-582 #00KM 49-584 #0

SCOVILLE CURETTE 10� with hollow handleKM 49-574 straightKM 49-576 down angleKM 49-578 up angle

000 00 0

1/1

1/1 1/1 1/1

straight down angle up angle

1/1 1/1 1/1

CONE RING CURETTE 9� with knurled handle, fenestrated cup

straightKM 49-450 size #1, 8mm diameterKM 49-452 size #2, 6mm diameterKM 49-454 size #3, 3mm diameter

angled 35ºKM 49-456 size #1, 8mm diameterKM 49-458 size #2, 6mm diameterKM 49-460 size #3, 3mm diameter

3mm 6mm 8mm

1/1

CURETTES

®

29

straightKM 46-422 #3/0 KM 46-423 #2/0KM 46-424 #0KM 46-425 #1KM 46-426 #2KM 46-427 #3KM 46-428 #4KM 46-429 #5KM 46-430 #6

angledKM 46-433S #3/0KM 46-434S #2/0KM 46-435S #0KM 46-436S #1KM 46-437S #2KM 46-438S #3KM 46-439S #4KM 46-440S #5KM 46-441S #6

angledKM 46-433 #3/0KM 46-434 #2/0KM 46-435 #0KM 46-436 #1KM 46-437 #2KM 46-438 #3KM 46-439 #4KM 46-440 #5KM 46-441 #6

all stainlessstraightKM 46-422S #3/0KM 46-423S #2/0KM 46-424S #0KM 46-425S #1KM 46-426S #2KM 46-427S #3KM 46-428S #4KM 46-429S #5KM 46-430S #6

COBB CURETTE 11� with knurled handle

anodized aluminum handlestainless steel working end

3/0 2/0 3210 54 6

SmartRack® forCobb Curettes shown onpage 89 (KM 98-170).

1/1

RING CURETTE hollow handle, with fenestrated cup

0 2 61/1

KM 55-680 10�KM 55-684 111⁄2�

KM 55-681 10�KM 55-685 111⁄2�

KM 55-682 101⁄4�KM 55-686 12�

®

CURETTES30

BRUNCURETTE endoscopicgraduated withphenolic handle

KM 55-53217� angled 40°2mm x 4mm cup 2.7� tip length9.3� shaft length5� handle length.285� (7.2mm) shaft diameter

KM 55-52317� straight3mm x 6mm cup 2.7� tip length9.3� shaft length5� handle length.285� (7.2mm) shaft diameter

KM 55-53317� angled 40°3mm x 6mm cup2.7� tip length9.3� shaft length5� handle length.285� (7.2mm) shaft diameter

KM 55-55620� angled 30°6mm x 9mm cup31⁄2� tip length10� shaft length61⁄2� handle length.45� (11.5mm) shaft diameter

1⁄1

1⁄1

1⁄1

1⁄1

KM 55-54320� angled 40°3mm x 6mm cup31⁄2� tip length10� shaft length61⁄2� handle length.45� (11.5mm) shaft diameter

1⁄1


to 290°F (143°C)

1⁄1

1⁄1

KM 55-58620� reverse angled 30°6mm x 9mm cup31⁄2� tip length10� shaft length61⁄2� handle length.45� (11.5mm) shaft diameter

EPSTEIN CURETTE endoscopicgraduated with phenolic handle

KM 55-59317� reverse angled 40°3mm x 6mm cup2.7� tip length9.3� shaft length5� handle length.285� (7.2mm) shaft diameter

Longer phenolic handles providetwo-handed control for better leverage.

CURETTES

®

31

SCOVILLE CURETTE endoscopicKM 55-51020� graduated with phenolic handle9mm x 15mm cup straight31⁄2� tip length10� shaft length61⁄2� handle length.45� (11.5mm) shaft diameter

1⁄1

CONE RING CURETTE endoscopicgraduated with phenolic handle

KM 55-57317� angled 40°3mm diameter2.7� tip length9.3� shaft length5� handle length.285� (7.2mm) shaft diameter

KM 55-56620� angled 30°6mm diameter 31⁄2� tip length10� shaft length61⁄2� handle length.45� (11.5mm) shaft diameter

1⁄1

1⁄1

Longer phenolichandles provide

two-handed controlfor better leverage.


to 290°F (143°C)

OSTEOTOMES

®

32

LAMBOTTE OSTEOTOME

7� straightwith calibration linesKM 46-348 4mmKM 46-349 5mmKM 46-350 6mmKM 46-358 8mmKM 46-351 10mmKM 46-352 12mmKM 46-353 16mmKM 46-354 19mmKM 46-355 22mmKM 46-356 25mm

9� straightwithout calibration linesKM 46-304 1⁄4�KM 46-306 1⁄2�KM 46-310 3⁄4�KM 46-314 1�KM 46-318 11⁄4�KM 46-322 11⁄2�

9� curvedwithout calibration linesKM 46-328 1⁄4�KM 46-329 1⁄2�KM 46-330 3⁄4�KM 46-331 1�KM 46-332 11⁄4�KM 46-333 11⁄2�

5⁄32� (4mm) 5⁄16� (8mm)

SmartRack® for 9 � Lambotte Osteotomesshown on page 90 (KM 98-190).

3⁄8� (10mm) 15⁄36� (12mm) 1� (25mm)

SMITH PETERSON OSTEOTOME

8� straightKM 46-448 1⁄4�KM 46-449 3⁄8�KM 46-450 1⁄2�KM 46-451 5⁄8�KM 46-452 3⁄4�KM 46-453 1�KM 46-454 11⁄4�

8� curvedKM 46-457 1⁄4�KM 46-458 3⁄8�KM 46-459 1⁄2�KM 46-460 5⁄8�KM 46-461 3⁄4�KM 46-462 1�KM 46-463 11⁄4�

1⁄4� 1⁄2� 1�

1/1

SmartRack® for Smith Peterson Osteotomesshown on page 90 (KM 98-195).

1/1

OSTEOTOMES

®

33

HIBBS OSTEOTOME with hexagonal handle, all stainless steel

9� straightKM 46-359 1⁄4�KM 46-360 3⁄8�KM 46-361 1⁄2�KM 46-362 5⁄8�KM 46-363 3⁄4�KM 46-364 7⁄8�KM 46-365 1�KM 46-366 11⁄8�KM 46-367 11⁄4�KM 46-368 11⁄2�

9� curvedKM 46-373 1⁄4�KM 46-376 3⁄8�KM 46-377 1⁄2�KM 46-378 5⁄8�KM 46-379 3⁄4�KM 46-380 7⁄8�KM 46-381 1�KM 46-382 11⁄8�KM 46-383 11⁄4�KM 46-384 11⁄2�

1� 11⁄4�

SmartRack® forHibbs Osteotomes shown

on page 89 (KM 98-180).

1/1

COBB OSTEOTOME all stainless steel

11� straightKM 49-350 1/4�KM 49-351 3/8�KM 49-352 1/2�KM 49-353 5/8�KM 49-354 3/4�KM 49-355 1/41�KM 49-356 11/4�

11� curvedKM 49-357 1/4�KM 49-358 3/8�KM 49-359 1/2�KM 49-360 5/8�KM 49-361 3/4�KM 49-362 1/41�KM 49-363 11/4�

1/4� 3/8�

1/2� 5/8� 3/4�

1� 11/4�

1/1

OSTEOTOMES AND CHISELS

®

34

1⁄1

HIBBS OSTEOTOME endoscopicKM 55-642181⁄2� with stainless steel handle3⁄8� (10mm) tip width straight31⁄2� tip length, graduated103⁄4� shaft length41⁄4� handle length.45� (11.5mm) shaft diameter

HIBBS CHISELstainless steel handle



1⁄4� 1⁄2� 3⁄4�

SmartRack® forHibbs Chisels shown onpage 89 (KM 98-180).

1/1

1� 11⁄4�

CHISELS

®

35

LEXER MINI CHISEL 7� phenolic handle

LEXER CHISEL 83/4� phenolic handle

4mm 6mm 8mm 10mm 12mm

KM 49-260 4mmKM 49-262 6mmKM 49-264 8mmKM 49-266 10mmKM 49-268 12mm

5mm 7mm 10mm 15mm

20mm 25mm 30mm

KM 49-246 5mmKM 49-248 7mmKM 49-250 10mmKM 49-252 15mmKM 49-254 20mmKM 49-256 25mmKM 49-258 30mm

1/1

1/1

1/1

1/1

Phenolic handles areautoclavable to 290°F (143°C)

GOUGES

®

36

SMITH PETERSON GOUGE

8� straightKM 46-466 1/4�KM 46-467 3/8�KM 46-468 1/2�KM 46-476 5/8�KM 46-477 3/4�KM 46-478 1�KM 46-479 11/4�

8� curvedKM 46-487 1/4�KM 46-488 3/8�KM 46-489 1/2�KM 46-490 5/8�KM 46-491 3/4�KM 46-493 1�KM 46-495 11/4�

1⁄4� 1⁄2� 3⁄4�1/1

SmartRack® for Smith Peterson Gougesshown on page 90 (KM 98-195).

HIBBS GOUGE



1⁄4� 1⁄2� 3⁄4�

1� 11⁄4�

SmartRack® forHibbs Gouges shown onpage 89 (KM 98-180).

1/1

GOUGES

®

37

COBB-TYPE SPINAL GOUGE 11�all stainless, with knurled handle

KM 49-034strong curve5⁄32� (7mm) blade width

KM 49-036reverse curve5⁄32� (7mm) blade width

KM 49-030straight5⁄32� (7mm) blade width

KM 49-032medium curve5⁄32� (7mm) blade width

SmartRack® forCobb-type Gouges shown

on page 89 (KM 98-170).

1/1 1/1

1/1 1/1

1⁄1

HIBBS GOUGE endoscopicKM 55-630181⁄2� with stainless steel handle.28� (7mm) tip width straight, graduated31⁄2� tip length103⁄4� shaft length41⁄4� handle length.45� (11.5mm) shaft diameter

MALLETS

®

38

COMBINATION MALLETwith one nylon cap and one solid stainless sideKM 46-68671⁄2�weight: 9 oz. (260 grams)head weight: 5 oz. (150 grams)head diameter: 26mm

KM 46-68771⁄2�weight: 12 oz. (340 grams)head weight: 8 oz. (240 grams)head diameter: 30mm

Autoclavable to250˚F (121˚C).

ORTHOPEDIC MALLET short handle, lightweightKM 49-7637� solid stainless steelweight: 1 lb. 2 oz. (500 grams)head weight: 8 oz. (240 grams)head diameter: 30mm

ORTHOPEDIC MALLET short handle, heavyweightKM 49-76271⁄2� solid stainless steelweight: 2 lbs. (900 grams)head weight: 1 lb. 5 oz. (600 grams)head diameter: 38mm

CLOWARD-STYLE MALLETsolid stainless steelKM 55-400 KM 55-40171⁄2� 9�weight: 8 oz. (240 grams) weight: 1 lb. (450 grams)head weight: 4 oz. (120 grams) head weight: 8 oz. (240 grams)head diameter: 19mm head diameter: 25mmball pean diameter: 16mm ball pean diameter: 22mm

IMPACTORS AND TAMPS

®

39

BONE IMPACTORKM 69-98061⁄2� with replaceable nylon capsanodized aluminum handlehead diameter: 20mm

BONE TAMP 6� with cross serrated tip

Designed to tap bone graft orbone parts into place with

minimal trauma to the bone.The compactor head is nylon

with a grid surface toprevent slippage.

Autoclavable to 250° F (121° C).

KM 46-893 2mm diameterKM 46-894 3mmKM 46-895 4mmKM 46-896 5mmKM 46-897 6mmKM 46-898 8mmKM 46-899 10mm

2mm 3mm 4mm 5mm

6mm 8mm 10mm

1/1

1/1

IMPACTORS AND TAMPS

®

40

LUMBAR AND CERVICAL IMPACTORS AND DRIVERS serrated tipsKM 55-370 Impactor, standard offset, 81⁄2�KM 55-371 Impactor, central canal, 81⁄2�KM 55-372 Impactor, lateral narrow, 81⁄2�KM 55-373 Impactor, micro offset, 7�KM 55-374 Impactor, micro lateral, 7�KM 55-375 Graft Driver, lumbar, guarded, 81⁄2�KM 55-376 Graft Driver, anterior, guarded, 81⁄2�KM 55-377 Graft Driver, lumbar, unguarded, 81⁄2�KM 55-378 Graft Driver, anterior, unguarded, 81⁄2�

KM 55-3706mm x 12mm

KM 55-37510mm x 13mm

KM 55-3767mm x 13mm

KM 55-37710mm x 13mm

KM 55-3787mm x 13mm

KM 55-3717mm x 16mm

KM 55-3726mm x 13mm

KM 55-3734mm x 10mm

KM 55-3744mm x 10mm

1/1

1/1

IMPACTORS AND TAMPS

®

41

KM 49-7512mm x 9mm

KM 49-7526mm x 9mm

KM 49-7503mm x 16mm

KM 49-7536mm x 19mm

BONE CHIP PACKER10� smooth tipsstainless steel handle

KM 49-7541⁄4� diameter

1/1 1/1

1/11/1

1/1

BONE TAMP endoscopicKM 55-67617� with stainless steel handle3⁄8� diameter.16� tip length12.59� shaft length41⁄4� handle length.280� (7.1mm) shaft diameter

1⁄1

BONE CUTTING FORCEPS

®

42

LISTON BONE FORCEPS

KM 47-39851⁄2� straight

KM 47-41051⁄2� angledon flat







1/1 1/1 1/1 1/1

1/1 1/1 1/1 1/1

RUSKIN-LISTON FORCEPS

KM 47-54071⁄2� straightdelicate blades

KM 47-5417� angled on flatdelicate blades

1/1 1/1


KM 47-54271⁄4� angular

1/1 1/1

BONE CUTTING FORCEPS

®

43

STILLE-LISTON FORCEPSKM 47-366101⁄2� straight

STILLE-LISTON FORCEPSKM 47-370101⁄2� angled on flat

STILLE-HORSLEY FORCEPSKM 47-374101⁄2� angled

1/1

1/1

1/1

RONGEURS

®

44

LEMPERT RONGEUR 6�KM 47-258straight delicate3x7mm bite

LEMPERT RONGEUR 71⁄2�KM 47-254straight delicate3x7mm bite

KM 47-260curved delicate3x7mm bite

KM 47-258 KM 47-260

KM 47-256curved delicate3x7mm bite

1/1 1/1 KM 47-254 KM 47-2561/1 1/1

RUSKIN RONGEURKM 47-5236� straight, delicate2x14mm bite

KM 47-5326� straight3x15mm bite

KM 47-5346� curved3x15mm bite

RUSKIN RONGEUR 71⁄4�straightKM 47-526 4x16mm biteKM 47-528 6x16mm bite

curvedKM 47-527 4x16mm biteKM 47-531 6x16mm bite

KM 47-532

KM 47-523

KM 47-534

KM 47-527 KM 47-531

1/1 1/11/1

1/1 1/1

RONGEURS

®

45

BEYER RONGEURKM 47-5207� curved3x14mm bite


KM 47-520 KM 47-522

1/1 1/1

ZAUFAL-JANSEN RONGEURKM 47-5247� curved5x15mm bite

1/1

LUER RONGEURKM 47-2787� straight8x12mm bite


KM 47-278 KM 47-284

1/1 1/1

KM 47-302 KM 47-306

ADSON RONGEURKM 47-3028� straight7x15mm bite


1/1 1/1

RONGEURS

®

46

ECHLIN DUCKBILL RONGEUR 9� straight, curved on side

KM 47-4802x12mm bite



1/1

STILLE-LUER ECHLIN RONGEURKM 47-4739� straight, curved on side6x15mm bite

1/1 1/1

RONGEURS

®

47

LEKSELL RONGEUR 9�15º curve







1/1 1/1 1/1

1/1 1/1 1/1

1/1

LEKSELL RONGEUR 9�50º curve







1/1 1/1 1/1

1/1 1/1 1/1

1/1

RONGEURS

®

48

STILLE-LUER DUCKBILL RONGEURKM 47-4729" curved on side6x13mm bite

STILLE-LUER RONGEUR

straightKM 47-458 81⁄2�KM 47-462 101⁄2�10x18mm bite

curvedKM 47-460 81⁄2�KM 47-464 101⁄2�10x18mm bite

1/1

curved on sideKM 47-461 81⁄2�


1/11/1

1/1

1/1

1/1

RONGEURS

®

49

SYPERT RONGEUR 141⁄2� slightly angled jaw

SMITH-PETERSON LAMINECTOMY RONGEUR 91⁄2� DALE THORACIC RONGEUR 141⁄2� slight curveKM 47-3963x16mm bite

KM 47-474straight3x16mm bite

KM 47-476curved3x16mm bite

KM 47-478full curved3x16mm bite

1/1 1/1

1/1

1/1





1/1

SPINAL RONGEURS AND PUNCHES

®

50SHAFT LENGTHmeasured in closed position

BITE STYLES punch jaws, regular footplate

Forward 40° Up 90° Down 90°

BITE STYLES cup jaws

Straight Up Down

PUNCH JAWS

Foot plate Bite sizeBite opening

BITE STYLES punch jaws, thin footplate

Forward 40° Up 90° Down 90°

IDENTIFICATION CHART

Bite size is etched on handles ofspinal rongeurs and punches.


®

51HANDLE STYLES

STYLE IRing handlehandle height: 4�

STYLE IIKerrison Handlehandle height: 61/4�

STYLE IIILove-Kerrison Handle(Cherry)handle height: 6�

STYLE IVLarge Kerrison Handle handle height: 61/4�

All KMedic spinal rongeurs and punches havebite size etched on handles for easy identification.


®

52HANDLE STYLES

STYLE VSmall Kerrison Handlehandle height: 5�

STYLE VIFerris-SmithKerrison Ring Handlehandle height: 5�

STYLE VIISpurling Kerrison Handlehandle height: 43⁄4�Wider grip improvescomfort and control.

STYLE VIIIMedium Kerrison Handlehandle height: 51⁄4�

All KMedic spinal rongeurs and punches havebite size etched on handles for easy identification.

SPINAL IVD RONGEURS

®

53

CUSHING2x10mm bite straight

KM 47-710 5�KM 47-730 7�

2x10mm bite up angle

KM 47-712 5�KM 47-732 7�

2x10mm bite down angle

KM 47-714 5�KM 47-734 7�

LOVE-GRUENWALD3x10mm bite straight

KM 47-760 5�KM 47-780 7�


KM 47-762 5�KM 47-782 7�


KM 47-764 5�KM 47-784 7�

SPURLING4x10mm bite straight

KM 47-800 5�KM 47-840 7�


KM 47-802 5�KM 47-842 7�


KM 47-804 5�KM 47-844 7�

INTERVERTEBRALDISC RONGEUR(Handle style I)

straight up angle down angle

1/1 1/1 1/1

1/1 1/1 1/1

1/1 1/1 1/1

3m

m

SPINAL IVD RONGEURS

®

54

2x10mm bite straight

KM 55-946 6�


KM 55-952 6�


KM 55-940 6�


KM 55-947 6�


KM 55-953 6�


KM 55-941 6�


KM 55-948 6�


KM 55-954 6�


KM 55-942 6�

CASPAR styleINTERVERTEBRAL DISCRONGEUR(Handle style I)



KM 55-949 6�

1/1

3mm

1/1 1/1 1/1

1/1 1/1 1/1

1/1 1/1 1/1

SPINAL IVD RONGEURS

®

55


KM 55-936 61⁄4�KM 55-961 71⁄4�


KM 55-972 71⁄4�


KM 55-966 71⁄4�


KM 55-937 61⁄4�KM 55-962 71⁄4�


KM 55-973 71⁄4�


KM 55-967 71⁄4�

CASPAR styleINTERVERTEBRAL DISCRONGEUR(Handle style I)fenestrated jaw, serrated cup


1/1

1/1 1/1 1/1

1/1 1/1 1/1


KM 55-938 61⁄4�KM 55-963 71⁄4�


KM 55-974 71⁄4�

1/1 1/1


KM 55-964 71⁄4�

1/1


KM 55-935 61⁄4�KM 55-960 71⁄4�

3m

m

SPINAL IVD RONGEURS

®

56

2x10mm bite straightKM 47-858

2x10mm bite upKM 47-860

2x10mm bite downKM 47-862










Ring handle lessenschance of slippage.

FERRIS-SMITH INTERVERTEBRALDISC RONGEUR 7� shaft(Handle style VI)

straight down angleup angle

1/1 1/1 1/1

1/1 1/1 1/1

1/1 1/1 1/1

1/1 1/1 1/1

3m

m

SPINAL IVD RONGEURS

®

57

PEAPOD INTERVERTEBRAL DISC RONGEUR (Handle style I)51⁄2� shaftKM 55-8422x6mm bite up angle

1/1

TAKAHASHI INTERVERTEBRAL DISC RONGEUR(Handle style I)51⁄2� shaftKM 55-8003x10mm bite straight

1/1

SPINAL IVD RONGEURS

®

58

DECKER INTERVERTEBRAL DISC RONGEUR(Handle style I)6� shaftKM 55-8582x6mm bite straight

1/1

KM 47-707small 4x9mm bite

KM 47-708medium 5x10mm bite

KM 47-709large 6x11mm bite

WILDE INTERVERTEBRAL DISC RONGEUR(Handle style I)5� shaftfenestrated jaws straight

1/1

1/1

1/1

SPINAL IVD RONGEURS

®

59

SELVERSTONE INTERVERTEBRAL DISC RONGEUR(Handle style I)6� shaftKM 55-8602x3mm bite straight

1/1

OLDBERG INTERVERTEBRAL DISC RONGEUR(Handle style I)7� shaftKM 55-8566mm bite round

1/1

SPINAL IVD RONGEURS

®

60

KM 47-7002x10mm bitestraight

KM 47-7023x10mm bite straight


KM 47-7033x10mm bite up angle

SCHLESINGER INTERVERTEBRAL DISC RONGEUR(Handle style I)6� shaftserrated jaws

1/1

1/1

1/1

1/1

KM 55-6933x10mm biteup angle

1/1

SCHLESINGER INTERVERTEBRAL DISC RONGEUR(Handle style I)9� shaftserrated jaws

KM 55-6945x10mm biteup angle

1/1


1/1


1/1

3m

m

3m

m

SPINAL IVD RONGEURS

®

61

FERRIS-SMITH INTERVERTEBRAL DISC RONGEUR endoscopic(Handle style VI)20�31⁄4� tip length103⁄4� shaft length6� handle length.470� (12.0mm) shaft diameter

KM 55-7622.5x10mm bite straight


KM 55-7674x10mm bite up angle

KM 55-7778x12mm bite straight, serrated

Graduated tip

1/11/1

SPINAL PUNCHES

®

62

KMedic CleanPunch™

� The first Kerrison that can be completely cleaned—eliminating all debris between shafts� Extremely precise cutting action—surgery proceeds smoothly� Easily disassembles and reassembles—all parts remain connected� A KMedic exclusive—advanced patent-pending design

In most punches, tissue anddebris get trapped between thetop and bottom shafts. This“buildup” is not only unsani-tary; it adversely effects thefunctioning of the instrument.Which slows down proceduresand can distract the surgeon.This problem is caused by thetypical punch design…whichdoes not allow parts to bedisassembled and properlycleaned.

The KMedic CleanPunch is thefirst Kerrison that easilydisassembles and reassemblesto ensure surgeons benefitfrom a clean, smooth cuttingaction. The product of finecraftsmanship and superiortechnology, the CleanPunch—like all KMedic CertifiedInstruments— is designed andmanufactured to performimpeccably.

Completely CleanWith total access to the topshaft, debris is quicklyremoved. Cleaning requires noscraping or “excavating”, whichcan damage an instrument anddelay surgery.

Simple to Open and CloseTo open, simply turn knobarrow to “open” and pull backthe top slider. To close: aligntop slider and bottom shaft,push slider forward, and turnknob arrow back to “close.”

Remains in One PieceThe KMedic CleanPunchremains in one piece through-out disassembly and reassem-bly. Patent-pending designensures there’s no possibility oflosing or switching parts.

Ergonomic DesignThe custom-designed handlehas a wider grip for optimumcontrol and comfort. In addi-tion, it reduces fatigue andenhances concentration.

Greater FlexibilityThe CleanPunch is availablewith regular and thin footplates,from 1 to 6mm bites. 34 com-binations in all. See pages 64-65 for complete listing.

A KMedic ExclusiveThe patent-pendingCleanPunch conforms to theexacting standards thatdistinguish all KMedic CertifiedInstruments. Look to KMedicfor new and innovativesolutions for spinal procedures.

SPINAL PUNCHES

®

63

KMedic CleanPunch™

Features and benefits:� Patent-pending design

enables the instrument to becompletely cleaned, eliminat-ing the “buildup” of bone,tissue and fluids that causesticking and resistance toaction.

� Provides a consistentlysmooth cutting action.

� Eliminates distractions thatinterrupt a surgeon’s concen-tration required in delicatespinal procedures.

� Instant identification enablessurgeons to quickly locate theright bite size. (Large, legiblemm sizes are etched on han-dles, as well as color coded.)

Color coded for instantbite size recognition1mm - Red2mm - Blue3mm - Yellow4mm - Black5mm - Green6mm - White

Cleaning the KMedicCleanPunch™

To open:1. Turn knob to “open” posi-

tion (align arrows).2. Hold top slider on serrations

and pull back.3. Clean interior surfaces.

To close:1. Put knob in “open” position.2. Align guides on top slider.3. Push top slider forward until

it clicks into place.4. Turn knob to “close”

position.5. Test for proper functioning.

Top and bottom surfaces areexposed to facilitate thoroughcleaning.

Knob arrows point to “open”and “close” settings. Thinfootplate model has a goldknob.

Serrations provide positivegripping area for fastdisassembly.

Alignment guide fits inbottom shaft to aidreassembly.

Bite sizes are displayed withlarge numerals and color-coding.

Wider grip improves comfortand control.

Permanent hinge supportsone-piece construction.

SPINAL PUNCHES

®

64

1mm bite forward KM 59-151 thin footplate

1/1


1/1


1/1


1/1


1/1

5mm bite up KM 59-163 thin footplate

1/1


1/1


1/1


1/1


1/1

Forward 40° Thin Footplate Up 90° Thin Footplate

KMEDIC CLEANPUNCH™

(Handle style VII)7� shaft

SPINAL PUNCHES

®

65

1mm bite forward KM 59-100 regular footplate

1/1


1/1


1/1


1/1


1/1


1/1

6mm bite up KM 59-116 regular footplate

1/1


1/1


1/1


1/1


1/1


1/1

Forward 40° Regular Footplate Up 90° Regular Footplate

KMEDIC CLEANPUNCH™

(Handle style VII)7� shaft

SPINAL PUNCHES

®

66

Forward 40° Thin Footplate Up 90° Thin Footplate Down 90° Thin Footplate

1mm bite forwardKM 55-891 6�KM 55-904 7�KM 55-925 8�

� Thin footplate designed specifically for smallbone in the cervical area.

� Gold hexagonal screw denotes thin footplate.� Bite size etched on handle for quick

identification.� Care should be taken when using delicate

thin footplate punches.� Do not twist or pry instrument while cutting.� Do not use on large bones.

1/1

1mm bite up KM 55-905 7�

1/1

1mm bite down KM 55-906 7�

1/1


1/1


1/1


1/1


1/1


1/1


1/1


1/1


1/1


1/1


1/1


1/1


1/1

THIN FOOTPLATE KERRISON PUNCH(Handle style VII)

3mm

SPINAL PUNCHES

®

67

Forward 40° Regular Footplate Up 90° Regular Footplate Down 90° Regular Footplate


1/1 1/1


1/1


1/1


1/1

5mm bite upKM 47-991 7�KM 48-019 8�

1/1

5mm bite downKM 47-995 7�KM 48-023 8�

1/1


1/1


1/1


1/1

4mm bite upKM 47-990 7�KM 48-018 8�

1/1

4mm bite downKM 47-994 7�KM 48-022 8�

1/1

3mm bite upKM 47-989 7�KM 48-017 8�

1/1

3mm bite downKM 47-993 7�KM 48-021 8�

1/1

2mm bite upKM 47-988 7�KM 48-016 8�

1/1

2mm bite downKM 47-992 7�KM 48-020 8�

1/1

SPURLING KERRISON PUNCH(Handle style V)

Compact handle design to accommodate smaller hands.

1mm bite forwardKM 47-879 7�

3mm

SPINAL PUNCHES

®

68

Forward 40° Regular Footplate Up 90° Regular Footplate Down 90° Regular Footplate

KM 47-676 8�

1/1

3mm bite forwardKM 47-670 6�KM 47-678 8�

1/1

4mm bite forward KM 47-680 8�

1/1

5mm bite forwardKM 47-674 6�KM 47-682 8�

1/1

5mm bite upKM 47-646 6�KM 47-654 8�

1/1

5mm bite downKM 47-650 6�KM 47-658 8�

1/1

6mm bite forward KM 47-689 11�

1/1

4mm bite upKM 47-645 6�KM 47-853 8�

1/1

4mm bite downKM 47-649 6�KM 47-657 8�

1/1

3mm bite upKM 47-644 6�KM 47-652 8�

1/1

3mm bite downKM 47-648 6�KM 47-656 8�

1/1

2mm bite forward

LOVE-KERRISON LAMINECTOMY PUNCH(Handle style IV) Large Handle

3mm

SPINAL PUNCHES

®

69

SCHLESINGER CERVICAL LAMINECTOMY PUNCH(Handle style IV Large Handle)6� shaftRegular footplate

3mm bite upKM 47-610

5mm bite upKM 47-612

1/1

1/1

1/1

1/1

up biteregular footplate

down biteregular footplate

3mm bite downKM 47-614

5mm bite downKM 47-616

FERRIS SMITH KERRISON PUNCH(Handle style VI)Regular footplate

3mm bite

KM 55-813 7�KM 55-823 8�

1/1

1/1

forward 40°regular footplate

5mm bite

KM 55-815 7�KM 55-825 8�

3mm

3mm

SPINAL PUNCHES

®

70

FORAMENOTOMY PUNCH(Handle style V)8� shaftRegular footplate

MULTI-BITE KERRISON PUNCH(Handle style VIII)7� shaftDelicate thin footplateFor cervical use only

1/12mm bite forwardKM 55-980

1/13mm bite forwardKM 55-981

1/1

2mm curved bite upKM 48-030

1/1


1/1


Fenestrated upper shaft ejectscut pieces of bone and tissue.

3m

m

3mm

1/1

1/1

SPINAL PUNCHES

®

71

2mm biteKM 47-685

1/1

3mm biteKM 47-686

1/1

4mm biteKM 47-687

1/1

5mm biteKM 47-688

1/1

6mm biteKM 48-029

1/1

Regular footplateForward 40°

Compact handle design toaccommodate smaller hands.

SPURLING KERRISON PUNCH(Handle style V)11� shaftRegular footplate

Regular footplateForward 40°

LOVE-KERRISON LAMINECTOMY PUNCH(Handle style IV) Large HandleKM 47-68911� shaft6mm bite forwardRegular footplate

1/1

3mm

3mm

SPINAL PUNCHES

®

72

FERRIS-SMITH KERRISON PUNCH endoscopic20�31⁄4� tip length103⁄4� shaft length6� handle length.470� (12.0mm) shaft diameterRegular footplate

KM 55-7824mm bite downdown 90°

KM 55-7882.5mm bite forwardforward 40°

KM 55-7904mm bite forwardforward 40°

1⁄1

1⁄1

1⁄1

Graduated tip

MEASURING DEVICES

®

73

K-WIRE RULER AND PIN GAUGEKM 39-7106� lengthinch and mm graduated

Gauge MeasuresK-Wires .028 � – .062 �

.7mm – 1.6mm

Pins .5⁄64� – 3⁄16�2.0mm – 4.76mm

Rods .197 � – 1⁄4�5.0mm – 6.35mm

Reverse side has handygauge to measure

K-Wires, Steinmannpins, twist drills and

pins and rods.

LARGE SCREW DEPTH GAUGEKM 47-94083⁄4�up to 100mm

BONE COMPASSKM 48-3028�

ALUMINUM CALIPERKM 48-31291⁄8�inch and mm graduatedup to 6� (180mm)inside and outside measuringfaces and depth bar

Inside measuringfaces extra long

(60mm) forneurosurgery.

NEURO-CALIPERKM 48-3159" stainless steelinch/mm graduated up to 53/4" (145mm)inside and outside measuringfaces and depth bar

CASTROVIEJO CALIPERKM 53-04261⁄2�mm graduated up to 40mm

front back

SUCTION TUBES

®

74

FRAZIER SUCTION TUBE 7�KM 42-823 6 frenchKM 42-824 7 frenchKM 42-825 8 frenchKM 42-826 10 frenchKM 42-830 12 french

1 french = .33mm

1/17

french9

french11

french

FRAZIER SUCTION TUBE angledKM 42-863 41⁄2� 7 french KM 42-873 71⁄2� 7 frenchKM 42-864 41⁄2� 9 french KM 42-874 71⁄2� 9 frenchKM 42-866 41⁄2� 11 french KM 42-876 71⁄2� 11 french

FUKUSHIMA SUCTION TUBE

KM 42-880 61⁄4� 4 frenchKM 42-881 61⁄4� 5 frenchKM 42-882 61⁄4� 6 frenchKM 42-883 61⁄4� 7 frenchKM 42-884 61⁄4� 8 frenchKM 42-885 61⁄4� 9 french



Teardrop opening allowssurgeon to regulate

force of suction.

1/17

french9

french

KIRSCHNER WIRE AND STEINMANN PINS

®

75KMedic Wire and Pin Implants� Precision manufactured in Germany from certified implant stainless steel.

� Longer, gently tapered points for easier penetration.

� Smoothly hand polished, causing less trauma when removed.

� K-Wires and Steinmann pins are sold six (6) to the package.

Please inquire about availability of any sizes and styles not shown in this Sourcebook.

KIRSCHNER WIRES SMOOTHDrawings shown on this page

are not actual size.DIAMETER AND PRODUCT NUMBER

LENGTH .045� (1.1mm) .054� (1.4mm) .062� (1.6mm)

DOUBLE END TROCAR

4� KM 71-102 KM 71-104 KM 71-103

5� KM 71-107 KM 71-108 KM 71-109

6� KM 71-023 — KM 71-025

9� KM 71-112 KM 71-114 KM 71-113

SINGLE TROCAR round end

4� KM 71-132 KM 71-133 KM 71-134

5� KM 71-172 KM 71-174 KM 71-175

6� KM 71-182 — KM 71-185

9� KM 71-152 KM 71-154 KM 71-153

DOUBLE END DIAMOND

4� KM 71-202 KM 71-203 KM 71-204

5� KM 71-207 — KM 71-209

6� KM 71-032 — KM 71-033

9� KM 71-212 KM 71-214 KM 71-213

SINGLE DIAMOND round end

9� KM 71-242 — KM 71-243

DIAMETER AND PRODUCT NUMBER

LENGTH 5/64� (2.0mm) 3/32� (2.4mm) 7/64� (2.8mm) 1/8� (3.2mm) 9/64� (3.5mm) 5/32� (4.0mm) .177� (4.5mm)

9� KM 71-450 KM 71-453 KM 71-456 KM 71-459 KM 71-462 KM 71-465 KM 71-468

9� KM 71-480 KM 71-483 KM 71-486 KM 71-489 KM 71-492 KM 71-495 KM 71-498

9� KM 71-510 KM 71-513 KM 71-516 KM 71-519 KM 71-522 KM 71-525 KM 71-528

9� KM 71-600 KM 71-603 KM 71-606 KM 71-609 KM 71-612 KM 71-615 KM 71-618

9� KM 71-630 KM 71-633 KM 71-636 KM 71-639 KM 71-642 KM 71-645 KM 71-648

9� KM 71-660 KM 71-663 KM 71-666 KM 71-669 KM 71-672 KM 71-675 KM 71-678

DOUBLE END TROCAR

SINGLE TROCAR 3 shank end

SINGLE TROCAR round end

DOUBLE END DIAMOND

SINGLE DIAMOND 3 shank end

SINGLE DIAMOND round end

STEINMANN PINS SMOOTH

WIRE AND PIN CUTTERS

®

76

DIAMOND PIN CUTTERKM 46-65161⁄4� end cuttingmaximum capacity 5⁄64� (2.0mm)

Disassembles easilyfor cleaning.

SIDE CUTTERKM 46-6217� side cuttingwelded carbide jawsmaximum capacity .062� (1.6mm)

1/1

1/1

DOUBLE ACTION WIRE CUTTERKM 46-6237� angled, side cuttingwith carbide insertsmaximum capacity .062� (1.6mm)

DOUBLE ACTION WIRE CUTTERKM 46-62481⁄2� angled, side cuttingwith carbide insertsmaximum capacity 3⁄32� (2.4mm)

Welded carbide jawscan not be replaced.

1/1

1/1

1/1

1/1


®

77

WIRE CUTTER WITH SAFETY INSERTSKM 49-740 KM 49-740P7� front and side cutting set of replacementdouble action silicon insertsmaximum capacity .062� (1.6mm)patent pending

The KMedic Wire Cutter withSafety Inserts can help prevent thepotentially dangerous occurrenceof flying K-Wire pieces in the O.R.This instrument is designed to holdthe cut piece of wire in its siliconinserts. After cutting, the remnantwire can be safely disposed of,thus preventing cut pieces fromfalling into the wound site or flyinginto the air.

The silicon inserts are autoclavableand long-lasting. And as inserts arenot glued into the jaws, replace-ment is fast and easy. Simplyinsert the new ones by pressingthem into place. Inserts do not fallout or move under normal circum-stances.

Patent pending design manufac-tured exclusively by KMedic.

1/1

Wire Cutter with Safety InsertsCombines maximum leverage and optimum safety.

Pate

nt P

endi

ng


®

78

DOUBLE ACTION PIN CUTTERKM 49-80091⁄2� side cuttingmaximum capacity 1⁄8� (3.2mm)

SIDE PIN CUTTERKM 46-62915� side cuttingwith carbide insertsmaximum capacity 5⁄32� (4.0mm)

1/1

1/1

Double actionhandles give

more power tocut pins up to

1⁄8 � (3.2mm).

Heavy duty cutter for rodsup to 5⁄32� (4.0mm) andheavy Steinmann pins.

Slightly angled jawshouse long-lasting

special carbideinserts for cuttinghard titanium and

stainless steel rods.

PIN AND ROD CUTTERS

®

79

PIN CUTTER (SMALL)KM 46-63210� end cuttingmaximum capacity 1⁄8� (3.2mm)

PIN CUTTER (MEDIUM)KM 46-63316� end cuttingmaximum capacity 3⁄16� (4.7mm)

Heavy duty cutters, engineeredexclusively by KMedic have

replaceable jaws.

1/1

1/1

1/1

1/1

PIN AND ROD CUTTERS

®

80

Precision ground cuttingedges produce superiorcutting ability.

Jaws are made of the hardest stainlesstool steel forlong life.

Stop on handleprevents overloadon jaws.

Hollow handles are strong but light.

Comfortable, non-knurled handle.

Free floatingbolts preventstress build upand tightening.

Precisely ground jaws are made fromthe hardest stainless steel available.This redesigned cutter will cut harderspinal rods for a longer period of time.

IMPORTANT: This large cutter is not designed to be used inside the patient’s body.

PIN CUTTER (LARGE)KM 46-62622� side cuttingmaximum capacity 1⁄4� (6.3mm)patent pending

1/1

1/1

Large Pin CutterManufactured only by KMedic.

Pate

nt P

endi

ng

ROD CUTTERS

®

81

HAND-HELD ROD CUTTERstainless steel with silicone handleKM 46-635 27�

Table Top Rod CutterProvides an easy and safe way to cut spinal rods.

Hand-Held Rod Cutter

Powerful double-action jaws enablesurgeons to cut 1⁄4� rods with one hand.

Shearing action cuts cleanly—no raisedburrs or sharp jagged edges.

Unique cutting process can help preventthe potentially dangerous occurrence offlying rod pieces in the O.R.

Ergonomically-designed patentedOrtho-Grip™ silicone handle provides acomfortable, slip-proof grip.

Base and handle are perfectly balancedto ensure stability and prevent lifting.

Simple, efficient design has no foldinglevers, loose parts, or bearings that canbreakdown.

Cuts rods from:4.76mm (3⁄16�) to 6.35mm (1⁄4�)

All of the benefits of the table top cutterin a hand-held model.

Cuts rods from:4.76mm (3⁄16�) to 6.35mm (1⁄4�)

TABLE TOP ROD CUTTERstainless steel with silicone handleKM 46-628 27�

How to use the KMedic Table Top Rod Cutter:

1. Lift handle up.2. Insert rod in proper diameter hole.3. Press handle down.

IMPORTANT: This large cutter is not designed to be used inside the patient’s body.

CABLE CUTTER AND PLIERS

®

82 The KMedic Cable CutterCuts cleanly through cables without fraying!

Tested. After 1,000cuts using cobaltchrome cable, thecutter performedas well as it didon the first cut.

CABLE CUTTERKM 48-3787″maximum capacity 2.0mm cablejaws can be resharpened and replaced

Small jaw design allows surgeonto get close to bone–even in tightspaces.

Jaw angle captures the cable,then cuts through all strands atonce–eliminating frayed ends.

Cuts through cable with onecut–reducing risk of small cableparticles falling into operating site.

Durable tungsten carbidejaws cut hard cablessmoothly and easily.Strong joint design

is long-lasting andallows precise cutting.

Handle stop fordefined jaw travel. Positive handle bars

provide comfortablenon-slip grip andprecise control.

Long lastingextra heavysprings providesolid return.

1/1

NOTE: This instrument should only beused for cutting cable. Lubricate joint toensure proper function.

FLAT NOSE PLIERSKM 48-2486� delicate2mm tip

Delicate jaw tapersto 2mm. Made to

twist and bendcerclage wire.

1/1 1/1

SLIP JOINT PLIERSKM 48-2628�10mm tipmaximum opening 2�

Traditional designutility pliers haveadjustable jaws.

Good all purposeplier for handlingSteinmann Pins,

K-Wires, screws androds. 10mm jaw tip.

1/1

PLIERS

®

83

� Recommended for heavy use.Double action and finely serratedcarbide tips combine to provide apowerful grip on K-Wires and pins.

� 2mm tip is ideal for removingK-Wire up to 0.62mm from small,hard-to-reach sites.

� 4mm and 6mm jaws are ideal forgrasping and pulling all sizes ofK-Wires and pins.

DOUBLE ACTIONWIRE EXTRACTION PLIERS 7�KM 46-572 2mm delicate jaw, carbideKM 46-573 4mm jaw, carbideKM 46-574 6mm jaw, carbide

KM 46-572 KM 46-573 KM 46-574

1/1 1/11/1

Heavy Duty Locking PliersWith a reinforced durable jaw.

HEAVY DUTY LOCKING PLIERSKM 48-600 63/4� smallKM 48-602 8� mediumKM 48-608 10� large

1/11/1

� Heavy duty jaws lock securely onto pins.� Reinforced jaw hinge and housing are more rigid to

help prevent side to side shifting.� Made from 300 and 400 series surgical grade

stainless steel.� Will not chip or contaminate other instrumentation.� Adjustment screw for easy control of jaw opening.� One-handed, quick release self-locking lever.� Available in three sizes.

1/1

KM 48-600tip width 7mmmaximum opening 1�

KM 48-602tip width 9mmmaximum opening 1�

KM 48-608tip width 13mmmaximum opening 11/2�

WIRE TIGHTENERS

®

84

How to use the Loute Wire Tightener:

1. Loosen both knobs by turning counterclock-wise until center pin disappears from view.

2. Pass wire around bone and feed both endsinto center hole at the tip.

3. Use Wire Pulling Forceps (KM 46-637) to pullends through and hold wire taut while pushingthe instrument close to the bone.

4. Turn lower (distal) knob clockwise to lock wirein place. Then turn upper (proximal) knobclockwise to pull in remaining slack from wire.

5. Balance instrument in one hand and rotate itwith the other hand until resistance is felt.Then hold tightener shaft tight and turn lower(distal) knob clockwise until wire is cut.

Note: Hold instrument straight (do not tilt) whiletightening.

LOUTE WIRE TIGHTENERKM 46-61981⁄2�maximum capacity: 1.5mm/17 gauge cerclage wire

Useful forcerclage work

in deep andrestricted areas.

Disassembleseasily forcleaning.

JET WIRE TWISTERKM 49-81011�tip width 10mm

The KMedic Jet Wire Twister is designed toprovide fast, smooth and even twisting of softwire, saving time in the O.R. Now available forthe first time in stainless steel. Suitable for theentire range of cerclage wire.

How to use the KMedic Jet Wire Twister:

1. Wrap wire around bone and position ends nextto each other.

2. Grasp both ends of wire with jaw.

3. Engage the ratchet to enforce solid clamping.

4. Stabilize wiring site.

5. Pull back on t-handle repeatedly until wire hasreached desired tension.

6. Disengage ratchet.

Note: Jaws can be customized.Please contact us for details.

1/1

1/1

ROD HOLDERS AND BENDERS

®

85

ROD HOLDER 71⁄4�with ratchet

ROD HOLDER 81⁄4�with ratchet

KM 49-830 holds 5⁄32� (4.0mm) rodsKM 49-831 holds 3⁄16� (4.76mm) rodsKM 49-832 holds 1⁄4� (6.35mm) rods

Threaded HoleKM 49-701 holds 5⁄32� (4.0mm) rodsKM 49-702 holds .177� (4.5mm) rods

without Threaded HoleKM 49-706 holds .197� (5.0mm) rods

IN SITU ROD BENDERS 13�used in pairs

Bends 3⁄16� (4.76mm) rodsKM 49-780 rightKM 49-781 left

Bends 1⁄4� (6.35mm) rodsKM 49-782 rightKM 49-783 left

KM 49-850Holds 1⁄4� (6.35mm) rodsthreaded hole

KM 49-848Prism holds .197� (5.0mm)and 5.5mm rods

ROD HOLDER 10�with ratchet

1/1

1/1

ROD BENDERS

®

86

ONE-HANDED ROD BENDERKM 49-81271⁄2”for 3mm and 4mm diameter rods

Rollers and center knobs oneach side are free turning.

Double sided center knob.One side for use with3mm rods, the other sidefor 4mm rods.

Handle horns provide comfortablenon-slip grip.

Precision ball bearing springfor smooth action.

1/1 1/1

One-Handed Rod BenderEasily bends 3mm and 4mm rods.

ROD BENDERS

®

87

Unique “pin-in-slot guide” keepsbending knob still while providingsmooth and accurate function.

Grooved rollers hold any size rod (up to 7mm)securely.

Adjustable center knob allows rods to be bent tothree different radii or angles—without using a reduction ring.

Spring-loaded center knob pulls outand indexes easily to selected position.

Grooves in center knob providea sure grip.

Relief in handle helps prevent pinching.

IMPORTANT: Before bending, make sure that rod isproperly seated (ie: flat and even) on the center knoband between both roller grooves.

UNIVERSAL ROD BENDERKM 46-66411”U.S. Patent #5,490,409

Universal Rod BenderBends any size rod (up to 7mm) to threedifferent angles without using a separatereduction ring.

Manufactured exclusively by KMedic.

U.S

. Pat

ent #5

,490

,409

SMARTRACKS®

®

88SmartRacks®

Exclusive KMedic design protects sharp edges better.

Side gates staylocked. Nylon coatedgates are secured in

place with sidelatches–reduces

accidental opening.

No metal to metalcontact. Instrument

slots are coveredwith nylon to helpprevent scratching

and maintaininstrument quality.

Nylon coated crossbrackets holdinstruments securely.

SmartRacks® are built to last!Outside frame is made from corrosion-resistant anodizedaluminum and double riveted. Fully autoclavable to 270˚F.

Delicate tips areprotected. A plasticplate attached to the topbracket prevents metalto metal contact–evenwhen the racks areturned upside down.

Easy to load and unload. Our unique “A”frame base forces instruments to lean intothe rack–not out. Racks can go from theautoclave to the O.R. where instrumentscan be removed one at a time.

Side gates stay open during loadingand unloading. Notches in the top of

each panel keep side gates up andout of the way.

SmartRacks® save time.Product number and content

charts are printed on top of racks.This makes instrument-to-rackidentification quick and easy.

U.S. Patent #5,843,388

SMARTRACKS®

®

89

Lightweight racks for sterilizationand storage

� Nylon coated brackets help avoid metal to metal contact.

� Plastic plate on underside of top bracket helps protectsharp tips from being damaged.

� Side arm stays locked to help prevent instruments fromfalling out, even when turned upside down.

� Deep brackets hold instruments in place.

� Custom designed base keeps instruments upright duringloading and unloading.

� Reinforced, sturdier frames are made from corrosion-resistant anodized aluminum.

� Fully autoclavable to 270˚F.

� Quick reference chart easily identifies the type and sizeinstrument rack holds.

� Patented design manufactured only by KMedic.

SmartRacks® are designed to hold KMedic instruments.See page 90 for detailed listing.

U.S. Patent #5,843,388

BRUN SMARTRACK®

KM 98-16093⁄4� x 81⁄2� x 23⁄4�Holds twelve 7� KMedic Brun Curettes

COBB SMARTRACK®

KM 98-170133⁄4� x 141⁄2� x 3�Holds nine 11� KMedic Cobb Curettes,Elevators or Gouges

HIBBS AND BRUN SMARTRACK®

KM 98-18012� x 9� x 31⁄4�Holds twelve 9� KMedic Brun Curettes,Hibbs Chisels, Gouges or Osteotomes

SMARTRACKS®

®

90

LAMBOTTE SMARTRACK®

KM 98-190113⁄4� x 61⁄4� x 31⁄2�Holds twelve 9� KMedicLambotte Osteotomes

SMITH PETERSON SMARTRACK®

KM 98-19511� x 10� x 4�Holds fourteen 8� KMedic Smith PetersonOsteotomes or Gouges

DESCRIPTION INSTRUMENTS HELD IN EACH RACK

BRUN SMARTRACK® Twelve 7″ KMedic Brun CurettesKM 98-160 KM 46-511 thru KM 46-53193/4″ x 81/2″ x 23/4″

COBB SMARTRACK® Nine 11″ KMedic Cobb Curettes, Elevators or GougesKM 98-170 Curettes – KM 46-422 thru KM 46-441133/4″ x 141/2″ x 3″ Elevators – KM 46-413 thru KM 46-420

Gouges – KM 49-030 thru KM 49-036

HIBBS AND BRUN SMARTRACK® Twelve 9″ KMedic Brun Curettes, Hibbs Chisels, Gouges or OsteotomesKM 98-180 Brun Curettes – KM 46-551 thru KM 46-559, KM 46-563 thru KM 46-571, 12″ x 9″ x 31/4″ KM 49-110 thru KM 49-118, and KM 49-150 thru KM 49-158

Hibbs Chisels – KM 49-059 thru KM 49-082Hibbs Gouges – KM 46-387 thru KM 46-412Hibbs Osteotomes – KM 46-359 thru KM 46-384

LAMBOTTE SMARTRACK® Twelve 9″ KMedic Lambotte OsteotomesKM 98-190 KM 46-304 thru KM 46-322113/4″ x 61/4″ x 31/2″ KM 46-328 thru KM 46-333

SMITH PETERSON SMARTRACK® Fourteen 8″ KMedic Smith Peterson Osteotomes or GougesKM 98-195 Smith Peterson Osteotomes – KM 46-448 thru KM 46-46311� x 10� x 4�113/4″ x 61/4″ x 31/2″ Smith Peterson Gouges – KM 46-466 thru KM 46-495

U.S. Patent #5,843,388

INSTRUMENT SETS

®

91MINIMALLY INVASIVE DISCECTOMY SET

KM # Qty. Description

KM 55-510 1 SCOVILLE CURETTE 20� 9x15mm, straight

KM 55-523 1 BRUN CURETTE 17� 3x6mm, straight

KM 55-532 1 BRUN CURETTE 17� 2x4mm, 40 degree angle




KM 55-566 1 CONE RING CURETTE 20� 6mm diameter, 30 degree angle

KM 55-573 1 CONE RING CURETTE 17� 3mm diameter, 40 degree angle

KM 55-586 1 EPSTEIN CURETTE 20� 6x9mm, 30 degree reverse angle

KM 55-593 1 EPSTEIN CURETTE 17� 3x6mm, 40 degree reverse angle

KM 55-610 1 COBB ELEVATOR 20� 6mm (1⁄4�)


KM 55-614 1 COBB ELEVATOR 20� 13mm (.490�)


KM 55-630 1 HIBBS GOUGE 181⁄2� 7mm (.28�), straight

KM 55-640 1 RIB ELEVATOR 17� 9mm radius tip, 45 degree angle

KM 55-642 1 HIBBS OSTEOTOME 181⁄2� 10mm (3⁄8�) straight

KM 55-644 1 RIB ELEVATOR 17� 9mm radius tip, 90 degree angle

KM 55-654 1 PENFIELD ELEVATOR 15� 4mm (.16�)

KM 55-662 1 NERVE PROBE 15� with ball tip, 45 degree angle

KM 55-664 1 NERVE PROBE 15� with ball tip, 90 degree angle

KM 55-676 1 BONE TAMP 17� 3⁄8� diameter

KM 55-762 1 FERRIS-SMITH RONGEUR 20� 2.5x10mm bite, straight

KM 55-763 1 FERRIS-SMITH RONGEUR 20� 4x10mm bite, straight

KM 55-767 1 FERRIS-SMITH RONGEUR 20� 4x10mm bite, angle up

KM 55-777 1 FERRIS-SMITH RONGEUR 20� 8x12mm bite, straight, serrated

KM 55-782 1 KERRISON PUNCH 20� 4mm bite, 90 degree down

KM 55-788 1 KERRISON PUNCH 20� 2.5mm bite, 40 degree forward

KM 55-790 1 KERRISON PUNCH 20� 4mm bite, 40 degree forward

INSTRUMENT SETS

®

92LAMINECTOMY SET

KM # Qty. Description

KM 29-059 2 SCALPEL HANDLE #3KM 29-060 1 SCALPEL HANDLE #4KM 29-061 1 SCALPEL HANDLE #3LKM 29-062 1 SCALPEL HANDLE #7KM 35-298 1 SUPER-CUT MAYO SCISSORS 63⁄4� curvedKM 35-382 1 SUPER-CUT METZENBAUM SCISSORS 6� curvedKM 35-394 1 SUPER-CUT METZENBAUM SCISSORS 7� curvedKM 36-178 4 CRILE FORCEPS 51⁄2� curvedKM 36-318 2 ROCH PEAN FORCEPS 61⁄4� curvedKM 36-436 2 ROCH-OCHSNER FORCEPS 8� straightKM 36-744 2 ADSON HEMOSTATIC FORCEPS 71⁄4� straightKM 36-746 2 ADSON HEMOSTATIC FORCEPS 71⁄4� curvedKM 37-462 4 BACKHAUS TOWEL FORCEPS 51⁄4�KM 37-468 6 LORNA (EDNA) TOWEL FORCEPS 51⁄4�KM 38-100 1 DRESSING FORCEPS 10�

KM 38-184 2 CUSHING BAYONET DRESSING FORCEPS 71⁄4� serratedKM 38-186 2 CUSHING BAYONET TISSUE FORCEPS 71⁄4� 1x2 teethKM 38-272 2 TISSUE FORCEPS 51⁄2� 1x2 teethKM 39-050 2 ADSON FORCEPS 6� 1x2 teeth 1.2mmKM 39-692 1 RULER 6� inch and mm graduated, flexibleKM 41-302 2 MAYO HEGAR NEEDLEHOLDER 6� serrated, carbideKM 41-314 2 MAYO HEGAR NEEDLEHOLDER 8� serrated, carbideKM 42-152 2 SAROT NEEDLEHOLDER 71⁄2� carbideKM 42-863 1 FRAZIER SUCTION TUBES 41⁄2� angled, 7 frenchKM 42-864 1 FRAZIER SUCTION TUBES 41⁄2� angled, 9 frenchKM 42-866 1 FRAZIER SUCTION TUBES 41⁄2� angled, 11 frenchKM 42-876 1 FRAZIER SUCTION TUBES 71⁄2� angled, 11 frenchKM 43-112 2 ALLIS TISSUE FORCEPS 6� 4x5 teethKM 46-667 1 ORTHOPEDIC MALLET 101⁄2�, 3 lb./2 lb.KM 46-899 1 BONE TAMP 6�, 10mm diameter, cross-serratedKM 48-217 2 INGE RETRACTOR 61⁄2�KM 49-170 2 DEBAKEY ATRAUMA TISSUE FORCEPS 8�, 1.5mmKM 51-059 2 HIBBS RETRACTOR 91⁄2�, 50MMKM 51-200 2 RICHARDSON RETRACTOR 91⁄2�, 3⁄4� x 1�

KM 51-204 2 RICHARDSON RETRACTOR 91⁄2�, 11⁄2� x 11⁄2�KM 51-372 2 U.S. ARMY RETRACTOR 81⁄2�KM 51-530 1 LOVE RETRACTOR 81⁄2� straight bladeKM 51-532 1 LOVE RETRACTOR 81⁄2� 45 degree angled bladeKM 51-534 1 LOVE RETRACTOR 81⁄2� 90 degree angled bladeKM 52-266 2 VOLKMAN RETRACTOR 81⁄2�, 6 sharp prongsKM 52-444 2 ADSON RETRACTOR 71⁄2�, angled 4x4 sharp prongsKM 52-458 1 TAYLOR SPINAL RETRACTOR 71⁄4�, 11⁄4� x 3�

KM 52-460 1 TAYLOR SPINAL RETRACTOR 8�, 11⁄4� x 4�

KM 52-484 2 BECKMAN-ADSON RETRACTOR 121⁄4�, 1�x1� bluntKM 52-498 2 WEITLANER RETRACTOR 51⁄2� sharpKM 52-502 2 WEITLANER RETRACTOR 61⁄2� sharpKM 52-532 2 BECKMAN-WEITLANER RETRACTOR 61⁄2�, 3x4 sharp prongsKM 53-160 1 STRABISMUS SCISSORS 4� straightKM 53-164 1 STRABISMUS SCISSORS 4� curvedKM 55-300 1 WOODSON ELEVATOR AND SPATULA 10�

KM 55-302 1 WOODSON DURAL SEPARATOR AND PACKER 7�

KM 55-440 1 MARKHAM-MEYERDING HEMILAMINECTOMY RETRACTOR 7� leftKM 55-441 1 MARKHAM-MEYERDING HEMILAMINECTOMY RETRACTOR 7� rightKM 57-614 2 FREER ELEVATOR 71⁄2�KM 57-615 2 KLEINERT-KUTZ ELEVATOR/DISSECTOR 73⁄4�KM 57-624 1 PENFIELD ELEVATOR 7� style 1KM 57-626 1 PENFIELD ELEVATOR 73⁄4� style 2KM 57-628 1 PENFIELD ELEVATOR 73⁄4� style 3KM 57-630 1 PENFIELD ELEVATOR 8� style 4

ALPHABETICAL INDEX93DESCRIPTION PAGE

EECHLIN DUCKBILL RONGEUR 46ELEVATORS 17-26ENDAURAL RETRACTOR 5ENDOSCOPIC BONE TAMP 41ENDOSCOPIC COBB ELEVATOR 25ENDOSCOPIC CURETTES 30,31ENDOSCOPIC ELEVATOR 20ENDOSCOPIC IVD RONGEUR 61ENDOSCOPIC KERRISON PUNCH 72ENDOSCOPIC NERVE PROBE 20ENDOSCOPIC OSTEOTOME 34EPSTEIN CURETTE 28EPSTEIN CURETTE ENDOSCOPIC 30

FFENESTRATED CURETTE 28,29,31FERRIS SMITH KERR PUNCH ENDO 72FERRIS SMITH KERRISON PUNCH 69FERRIS-SMITH IVD RONGEUR 56FERRIS-SMITH IVD RONGEUR, ENDO 61FINGER RETRACTOR 3FLAT NOSE PLIERS 82FORAMENOTOMY PUNCH 70FRAZIER LAMINECTOMY RETR 16FRAZIER SUCTION TUBES 74FREER ELEVATOR 17FUKUSHIMA SUCTION TUBES 74

GGELPI RETRACTOR 5,6GOUGES 36,37GRAFT DRIVER 39,40GRAFT, BONE TAMP 39,40

HHAND-HELD ROD CUTTER 81HARRINGTON SPINAL ELEVATOR 26HAVERFIELD-SCOVILLE RETR SET 15HEAVY DUTY PLIERS 83HEAVY WEIGHT MALLET 38HEMILAMINECTOMY RETR 9HIBBS AND BRUN SMARTRACK 89HIBBS BLADES 16HIBBS CHISEL 34HIBBS GOUGE 36HIBBS GOUGE ENDOSCOPIC 37HIBBS OSTEOTOME 33,34HIBBS OSTEOTOME ENDOSCOPIC 34HIBBS RETRACTOR 4HOLSHER NERVE RETR 2

IIDENTIFICATION CHART 50IMPACTORS 39,40IMPLANTS 75IN SITU ROD BENDERS 85INGE RETRACTOR 13INSTRUMENT SETS 91,92INTERVERTEBRAL DISC RONGEURS 53-61IVD RONGEURS 53-61

JJANSEN RETRACTOR 5JET WIRE TWISTER 84

KKERRISON CLEANPUNCH 62-65KERRISON PUNCHES 64-72KERRISON PUNCHES, TFP 64,66KEY PERIOSTEAL ELEVATOR 21KIRSCHNER WIRE 75KLEINERT KUTZ ELEVATOR 17KMEDIC CLEANPUNCH 62-65K-WIRE AND STEINMANN PINS 75K-WIRE CUTTERS 76,77K-WIRE PLIERS 82,83K-WIRE RULER AND PIN GAUGE 73

LLAMBOTTE OSTEOTOME 32LAMBOTTE SMARTRACK 90LAMINA SPREADERS 13,14LAMINECTOMY RETRACTORS 4,9-16LAMINECTOMY SET 92LANGENBACK PERIOSTEAL ELEV 22LARGE PIN CUTTER 80LARGE SCREW DEPTH GAUGE 73LEKSELL RONGEUR 47LEMPERT RONGEUR 44LEXER CHISHEL 35LEXER MINI CHISEL 35LISTON BONE FORCEPS 42LITTLE RETRACTOR 1LOCKING PLIERS 83LOUTIE WIRE TIGHTENER 84LOVE NERVE RETR 2LOVE-GRUENWALD RONGEUR 53LOVE-KERRISON LAM PUNCHES 68,71LUER RONGEUR 45LUMBAR DRIVER 40LUMBAR IMPACTOR 40LUMBAR LAMINA SPREADER 14

MMALLETS 38MARKHAM-MEYERDING RETR 9MEASURING DEVICES 73MEYERDING BLADES 15MEYERDING LAM RETRACTOR 4MINIMALLY INVASIVE DISC SET 91MISKIMON RETRACTOR 9MULTI-BITE KERRISON PUNCH 70

NNERVE PROBE ENDOSCOPIC 20NERVE RETRACTORS 1-3NEURO-CALIPER 73

OOFFSET NERVE RETR 2OLDBERG IVD RONGEUR 59ONE-HANDED ROD BENDER 86ORTHOPEDIC MALLET 38OSTEOTOMES 32-34

PPACKER, BONE CHIP 41PEAPOD IVD RONGEUR 57PENFIELD ELEVATOR ENDOSCOPIC 20PENFIELD ELEVATORS 19PERIOSTEAL ELEVATORS 21,22PIN CUTTER, LARGE 80PIN CUTTER, MEDIUM 79

DESCRIPTION PAGE

®

DESCRIPTION PAGE

AADSON PERIOSTEAL ELEVATOR 21ADSON RETRACTORS 8,11ADSON RONGEUR 45ALUMINUM CALIPER 73

BBECKMAN RETRACTOR 11BECKMAN-ADSON LAM RETR 10BECKMAN-EATON RETRACTOR 12BECKMAN-WEITLANER RETR 8BEYER RONGEUR 45BITE STYLES 50BLADE RETRACTOR 1BONE CHIP PACKER 41BONE COMPASS 73BONE CUTTING FORCEPS 42,43BONE GRAFT TAMP 39,40BONE IMPACTOR 39BONE TAMP 39BONE TAMP ENDOSCOPIC 41BRUN CURETTE 27BRUN CURETTE ENDOSCOPIC 30BRUN SMARTRACK 89

CCABLE CUTTER 82CALIBRATED OSTEOTOME 32CALIPERS 73CARROLL PERIOSTEAL ELEVATOR 21CASPAR IVD RONGEUR 54,55CASTROVIEJO CALIPER 73CEREBELLUM RETRACTOR 9CERVICAL DRIVER 39,40CERVICAL IMPACTOR 39,40CERVICAL PUNCHES 64,66,69,70CERVICAL RETRACTOR SET 14CHIP PACKER 41CHISELS 34,35CLEANPUNCH 62-65CLOWARD BLADE RETR 1CLOWARD LAMINA SPREADERS 14CLOWARD-STYLE MALLET 38COBB CURETTE 29COBB OSTEOTOME 33COBB SMARTRACK 89COBB SPINAL ELEVATOR 23-25COBB SPINAL GOUGE 37COMBINATION MALLET 38COMPASS 73CONE RING CURETTE 28,31CONE RING CURETTE ENDOSCOPIC 31CURETTES 27-31CUSHING DECOMPRESSION RETR 3CUSHING IVD RONGEUR 53CUSHING PERIOSTEAL ELEVATOR 22CUSHING VEIN RETRACTOR 3

DDALE THORACIC RONGEUR 49DECKER IVD RONGEUR 58DEPTH GAUGE 73D’ERRICO STYLE NERVE RETR 2D’ERRICO-ADSON RETRACTOR 9DIAMOND PIN CUTTER 76DOUBLE ACTION PIN CUTTER 78DOUBLE ACTION PLIERS 83DOUBLE ACTION WIRE CUTTER 76DRIVERS, LUMBAR/CERVICAL 39,40

ALPHABETICAL INDEX94 DESCRIPTION PAGE

SENN RETRACTORS 1SIDE CUTTER 76SIDE PIN CUTTER 78SINGLE PRONG RETRACTOR 6SLIP JOINT PLIERS 82SMARTRACKS 88-90SMITH PETERSON GOUGE 36SMITH PETERSON OSTEOTOME 32SMITH-PETERSON LAM RONGEUR 49SMITH-PETERSON SMARTRACK 90SMITHWICK HOOK/DISSECTOR 20SNITMAN RETRACTOR 5SPINAL ELEVATORS 23-26SPINAL FUSION CURETTES 27SPINAL HANDLE STYLES 51,52SPINAL INDENTIFICATION CHARTS 50-52SPINAL PUNCHES 62-72SPINAL RETRACTORS 4,9-16SPINAL RONGEUR AND PUNCHES 50-72SPURLING KERRISON PUNCHES 67,71SPURLING RONGEUR 53STEINMANN PINS 75STILLE-HORSLEY FORCEPS 43STILLE-LUER DUCKBILL RONGEUR 48STILLE-LISTON FORCEPS 43STILLE-LUER ECHLIN RONGEUR 46STILLE-LUER RONGEUR 48STORAGE RACKS 88-90SUCTION TUBES 74SYPERT RONGEUR 49

TTABLE TOP ROD CUTTER 81TAKAHASHI IVD RONGEUR 57TAMPS 39,40TAYLOR LAMINECTOMY BLADES 16TAYLOR SPINAL BLADES 16TAYLOR SPINAL RETRACTOR 4THIN FOOT PLATE PUNCHES 64,66THORACIC RONGEUR 49TISSUE RETRACTOR 6TUBES, SUCTION 74

U-VUNIVERSAL ROD BENDER 87US ARMY RETRACTOR 4VEIN RETRACTOR 3VERTEBRA SPREADER 14VOLKMAN RETRACTOR 3

W-ZWEITLANER RETRACTORS 7,8WILDE IVD RONGEUR 58WILTSE-GELPI RETRACTOR 6WIRE AND PIN CUTTERS 76-79WIRE CUTTER WITH SAFETY INSERTS 77WIRE CUTTER, DOUBLE ACTION 76WIRE EXTRACTION PLIERS 82,83WIRE TIGHTENERS 84WIRE TWISTERS 84WIRES 75WOODSON DURAL SEP/PACKER 17WOODSON ELEV/SPATULA 17ZAUFAL-JANSEN RONGEUR 45

DESCRIPTION PAGE

®

DESCRIPTION PAGEPIN CUTTER, SMALL 79PIN CUTTERS 78-81PIN GAUGE 73PINS 75PLIERS 82,83PUNCH BITE STYLES 50PUNCH IDENT CHART 50PUNCH JAW STYLES 50

RRACKS FOR STERILIZATION 88-90RETRACTOR SET 14RETRACTORS 1-16RETRACTORS, LAMINECTOMY 4,9-16RETRACTORS, SPINAL 4,9-16RHOTON MICRO INSTRUMENTS 18RIB ELEVATOR 26RING CURETTE 28,31ROD CUTTERS 80,81ROD HOLDERS 85ROD HOLDERS AND BENDERS 85-87RONGEUR BITE STYLES 50RONGEUR INDENT CHART 50RONGEURS 44-49RULER 73RUSKIN RONGEUR 44RUSKIN-LISTON FORCEPS 42

SSACHS NERVE ELEVATOR 17SCALP RETRACTOR 6SCHLESINGER CERV LAM PUNCH 69SCHLESINGER IVD RONGEUR 60SCOVILLE BLADES 15SCOVILLE CURETTE 28SCOVILLE CURETTE ENDOSCOPIC 31SCOVILLE HEMILAM. RETR SET 15SCOVILLE NERVE RETR 2SCOVILLE RETRACTOR SET 15SELETZ RETRACTOR 5SELF-RETAINING RETRACTORS 5-16SELVERSTONE IVD RONGEUR 59

NUMERICAL INDEX

®

95KM # PAGEKM 39-710 73KM 42-823 74KM 42-824 74KM 42-825 74KM 42-826 74KM 42-830 74KM 42-863 74KM 42-864 74KM 42-866 74KM 42-873 74KM 42-874 74KM 42-876 74KM 42-880 74KM 42-881 74KM 42-882 74KM 42-883 74KM 42-884 74KM 42-885 74KM 42-890 74KM 42-891 74KM 42-892 74KM 42-893 74KM 42-894 74KM 42-895 74KM 42-901 74KM 42-902 74KM 42-903 74KM 42-904 74KM 42-905 74KM 42-906 74KM 46-222 22KM 46-224 22KM 46-258 21KM 46-260 21KM 46-262 21KM 46-264 21KM 46-266 21KM 46-304 32KM 46-306 32KM 46-310 32KM 46-314 32KM 46-318 32KM 46-322 32KM 46-328 32KM 46-329 32KM 46-330 32KM 46-331 32KM 46-332 32KM 46-333 32KM 46-348 32KM 46-349 32KM 46-350 32KM 46-351 32KM 46-352 32KM 46-353 32KM 46-354 32KM 46-355 32KM 46-356 32KM 46-358 32KM 46-359 33KM 46-360 33KM 46-361 33KM 46-362 33KM 46-363 33KM 46-364 33KM 46-365 33KM 46-366 33KM 46-367 33KM 46-368 33

KM # PAGEKM 46-373 33KM 46-376 33KM 46-377 33KM 46-378 33KM 46-379 33KM 46-380 33KM 46-381 33KM 46-382 33KM 46-383 33KM 46-384 33KM 46-387 36KM 46-388 36KM 46-389 36KM 46-390 36KM 46-391 36KM 46-392 36KM 46-393 36KM 46-394 36KM 46-395 36KM 46-401 36KM 46-402 36KM 46-403 36KM 46-404 36KM 46-405 36KM 46-407 36KM 46-408 36KM 46-409 36KM 46-410 36KM 46-411 36KM 46-412 36KM 46-413 24KM 46-413S 24KM 46-414 24KM 46-414S 24KM 46-416 24KM 46-416S 24KM 46-418 24KM 46-418S 24KM 46-420 24KM 46-420S 24KM 46-422 29KM 46-422S 29KM 46-423 29KM 46-423S 29KM 46-424 29KM 46-424S 29KM 46-425 29KM 46-425S 29KM 46-426 29KM 46-426S 29KM 46-427 29KM 46-427S 29KM 46-428 29KM 46-428S 29KM 46-429 29KM 46-429S 29KM 46-430 29KM 46-430S 29KM 46-433 29KM 46-433S 29KM 46-434 29KM 46-434S 29KM 46-435 29KM 46-435S 29KM 46-436 29KM 46-436S 29KM 46-437 29KM 46-437S 29KM 46-438 29

KM # PAGEKM 46-438S 29KM 46-439 29KM 46-439S 29KM 46-440 29KM 46-440S 29KM 46-441 29KM 46-441S 29KM 46-448 32KM 46-449 32KM 46-450 32KM 46-451 32KM 46-452 32KM 46-453 32KM 46-454 32KM 46-457 32KM 46-458 32KM 46-459 32KM 46-460 32KM 46-461 32KM 46-462 32KM 46-463 32KM 46-466 36KM 46-467 36KM 46-468 36KM 46-476 36KM 46-477 36KM 46-478 36KM 46-479 36KM 46-487 36KM 46-488 36KM 46-489 36KM 46-490 36KM 46-491 36KM 46-493 36KM 46-495 36KM 46-511 27KM 46-512 27KM 46-513 27KM 46-515 27KM 46-517 27KM 46-519 27KM 46-521 27KM 46-523 27KM 46-525 27KM 46-529 27KM 46-531 27KM 46-551 27KM 46-552 27KM 46-553 27KM 46-554 27KM 46-555 27KM 46-556 27KM 46-557 27KM 46-558 27KM 46-559 27KM 46-563 27KM 46-564 27KM 46-565 27KM 46-566 27KM 46-567 27KM 46-568 27KM 46-569 27KM 46-570 27KM 46-571 27KM 46-572 83KM 46-573 83KM 46-574 83KM 46-619 84KM 46-621 76

KM # PAGEKM 46-623 76KM 46-624 76KM 46-626 80KM 46-628 81KM 46-629 78KM 46-632 79KM 46-633 79KM 46-635 81KM 46-651 76KM 46-664 87KM 46-686 38KM 46-687 38KM 46-893 39KM 46-894 39KM 46-895 39KM 46-896 39KM 46-897 39KM 46-898 39KM 46-899 39KM 47-254 44KM 47-256 44KM 47-258 44KM 47-260 44KM 47-278 45KM 47-284 45KM 47-302 45KM 47-306 45KM 47-366 43KM 47-370 43KM 47-374 43KM 47-380 49KM 47-382 49KM 47-384 49KM 47-386 49KM 47-396 49KM 47-398 42KM 47-400 42KM 47-402 42KM 47-404 42KM 47-406 42KM 47-408 42KM 47-410 42KM 47-412 42KM 47-458 48KM 47-460 48KM 47-461 48KM 47-462 48KM 47-464 48KM 47-472 48KM 47-473 46KM 47-474 49KM 47-476 49KM 47-478 49KM 47-480 46KM 47-482 46KM 47-484 46KM 47-486 47KM 47-487 47KM 47-488 47KM 47-489 47KM 47-490 47KM 47-492 47KM 47-494 47KM 47-495 47KM 47-496 47KM 47-497 47KM 47-498 47KM 47-499 47KM 47-520 45

NUMERICAL INDEX

®

®

96 KM # PAGEKM 47-522 45KM 47-523 44KM 47-524 45KM 47-526 44KM 47-527 44KM 47-528 44KM 47-531 44KM 47-532 44KM 47-534 44KM 47-538 42KM 47-540 42KM 47-541 42KM 47-542 42KM 47-610 69KM 47-612 69KM 47-614 69KM 47-616 69KM 47-644 68KM 47-645 68KM 47-646 68KM 47-648 68KM 47-649 68KM 47-650 68KM 47-652 68KM 47-654 68KM 47-656 68KM 47-657 68KM 47-658 68KM 47-670 68KM 47-674 68KM 47-676 68KM 47-678 68KM 47-680 68KM 47-682 68KM 47-685 67,71KM 47-686 67,71KM 47-687 67,71KM 47-688 67,71KM 47-689 68,71KM 47-700 60KM 47-702 60KM 47-703 60KM 47-704 60KM 47-707 58KM 47-708 58KM 47-709 58KM 47-710 53KM 47-712 53KM 47-714 53KM 47-730 53KM 47-732 53KM 47-734 53KM 47-760 53KM 47-762 53KM 47-764 53KM 47-780 53KM 47-782 53KM 47-784 53KM 47-800 53KM 47-802 53KM 47-804 53KM 47-840 53KM 47-842 53KM 47-844 53KM 47-853 68KM 47-855 67KM 47-856 67KM 47-857 67KM 47-858 56

KM # PAGEKM 47-860 56KM 47-862 56KM 47-864 56KM 47-866 56KM 47-868 56KM 47-870 56KM 47-872 56KM 47-873 56KM 47-874 56KM 47-875 56KM 47-878 56KM 47-879 67KM 47-940 73KM 47-988 67KM 47-989 67KM 47-990 67KM 47-991 67KM 47-992 67KM 47-993 67KM 47-994 67KM 47-995 67KM 47-996 67KM 47-997 67KM 47-998 67KM 47-999 67KM 48-016 67KM 48-017 67KM 48-018 67KM 48-019 67KM 48-020 67KM 48-021 67KM 48-022 67KM 48-023 67KM 48-024 67KM 48-025 67KM 48-026 67KM 48-027 67KM 48-028 67KM 48-029 67,71KM 48-030 70KM 48-032 70KM 48-033 70KM 48-217 13KM 48-218 13KM 48-226 13KM 48-228 13KM 48-230 13KM 48-234 2KM 48-237 2KM 48-248 82KM 48-262 82KM 48-302 73KM 48-312 73KM 48-315 73KM 48-378 82KM 48-600 83KM 48-602 83KM 48-608 83KM 49-030 37KM 49-032 37KM 49-034 37KM 49-036 37KM 49-059 34KM 49-060 34KM 49-061 34KM 49-062 34KM 49-063 34KM 49-064 34KM 49-065 34



NUMERICAL INDEX

®

97KM # PAGEKM 52-488 10KM 52-490 10KM 52-492 7KM 52-494 7KM 52-498 7KM 52-502 7KM 52-504 7KM 52-506 7KM 52-518 7KM 52-522 7KM 52-524 7KM 52-526 7KM 52-530 8KM 52-532 8KM 52-534 8KM 52-536 8KM 52-538 8KM 52-540 8KM 52-542 8KM 52-544 8KM 52-546 6KM 52-548 6KM 52-702 16KM 52-765 5KM 52-768 5KM 52-769 6KM 52-770 5KM 52-771 6KM 52-776 5KM 52-778 5KM 52-780 5KM 53-042 73KM 55-300 17KM 55-302 17KM 55-304 3KM 55-306 21KM 55-330 18KM 55-331 18KM 55-332 18KM 55-333 18KM 55-334 18KM 55-335 18KM 55-336 18KM 55-337 18KM 55-338 18KM 55-339 18KM 55-340 18KM 55-341 18KM 55-342 18KM 55-343 18KM 55-344 18KM 55-345 18KM 55-346 18KM 55-347 18KM 55-348 18KM 55-370 40KM 55-371 40KM 55-372 40KM 55-373 40KM 55-374 40KM 55-375 40KM 55-376 40KM 55-377 40KM 55-378 40KM 55-400 38KM 55-401 38KM 55-420 1KM 55-421 1KM 55-422 1




NUMERICAL INDEX

®

®

98 KM # PAGEKM 71-185 75KM 71-202 75KM 71-203 75KM 71-204 75KM 71-207 75KM 71-209 75KM 71-212 75KM 71-213 75KM 71-214 75KM 71-242 75KM 71-243 75KM 71-450 75KM 71-453 75KM 71-456 75KM 71-459 75

KM # PAGEKM 71-462 75KM 71-465 75KM 71-468 75KM 71-480 75KM 71-483 75KM 71-486 75KM 71-489 75KM 71-492 75KM 71-495 75KM 71-498 75KM 71-510 75KM 71-513 75KM 71-516 75KM 71-519 75KM 71-522 75

KM # PAGEKM 71-525 75KM 71-528 75KM 71-600 75KM 71-603 75KM 71-606 75KM 71-609 75KM 71-612 75KM 71-615 75KM 71-618 75KM 71-630 75KM 71-633 75KM 71-636 75KM 71-639 75KM 71-642 75KM 71-645 75

KM # PAGEKM 71-648 75KM 71-660 75KM 71-663 75KM 71-666 75KM 71-669 75KM 71-672 75KM 71-675 75KM 71-678 75KM 98-160 89KM 98-170 89KM 98-180 89KM 98-190 90KM 98-195 90

®

NOTES

0

1

2

3

4

5

6

7

8

0

10

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

170

180

190

200

210

220

mm inches

Ruler MM and Inches

Conversions:

Inches to MMMultiply the inch dimen-sion by 25.4 to obtain thesize in millimeters.

MM to InchesMultiply the millimeterdimension by .0394 ordivide by 25.4 to obtainthe size in inches.

Fahrenheit to Centigradeor Celsius DegreesSubtract 32 fromFahrenheit temperature.Multiply result by 5. Divideresult by 9.

Celsius or Centigrade to FahrenheitMultiply Centigrade tem-perature by 9. Divideresult by 5. Add to 32.

On the surface it’s difficultto tell one instrument fromanother. But in fact, manyqualities distinguish KMedicCertified Instruments from those of other manu-facturers. Our instrumentsare the product of a working knowledge of thesurgeon’s art, exactingmanufacturing specifica-tions and strict adherence to our QualityAssurance Program. Fromits origins as an idea, to the crafting of the proto-type, to its appearance on a surgical tray, it takesapproximately 80 steps tocreate a KMedic CertifiedInstrument. Every finishedinstrument is the result of years of performance mon-itoring and continualimprovements. Which iswhy we guarantee everyKMedic Certified Instru-ment for life.

At every stage of the man-ufacturing process superiorquality is built into ourinstruments. Neverthelessbefore our instruments findthemselves in a surgeon’s

hand, they are subject to an inspection processthat includes:

� Visual inspection against a master sample to assurepattern consistency

� Exacting caliper andmicrometer measurementsof critical dimensions

� Function tests to ensureadherence to performancestandards

� Surface audits to detectimperfections and irregularities

� Corrosion and hardnesstests to guarantee functionality and longevity

� Cutting tests to assure jawswill meet the specialdemands of bone cutting

� Maintenance of product history

The Ruskin Rongeur, shown here, is typical of KMedic craftsmanship.From its perfect symmetry to itsglare-diminishing finish, it providessurgeons with the qualities theyrequire to perform at their best. A closer inspection reveals:

What to look for in a KMedic Certified Instrument.

Manufacturing code to expedite tracing

KMedic number for easy reorder

Correct spring tension and size for optimumcontrol and motion

Precise geometric design, precision millingand assembly for proper balance and smoothmechanical action

Expertly sharpened jawsfor accurate cutting

Silk matte hand-finishedsurface for corrosion resistance

®

Ideal handle dimensions for the right heft and feel

Spinal Cover fc only - QUIRURGICO / Instrumental Spinal.pdf · About this Edition The KMedic Spinal...

Documents

Transcript of Spinal Cover fc only - QUIRURGICO / Instrumental Spinal.pdf · About this Edition The KMedic Spinal...