SPICER RING AND PINION GEARING OUTPERFORMS THE … · ©Dana Limited 2018. SPICER® RING AND PINION...
2
©Dana Limited 2018. SPICER ® RING AND PINION GEARING OUTPERFORMS THE COMPETITION Switch to a Better Gear Spicer ® ring and pinion gearing is the genuine gearing in all Dana manufactured axles. Why is it better than the competition? We’ll give you four good reasons: 1. Heat Treatment 2. Face Hobbing 3. Shot Peening 4. Lapping See the back of this sheet for comprehensive testing data. »»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»» Product information: Spicerparts.com | E-catalog and parts locator: DanaAftermarket.com CYCLE TESTING: COMPETITIVE GEARS (LOW LOAD) 500,000 400,000 300,000 200,000 100,000 RING GEAR CYCLES Spicer Part #2018747 Competitor A 33,720 Competitor B 195,720 Competitor C 196,680 COMPETITIVE GEAR TESTING RESULTS • AVERAGE CYCLES TO FAILURE – BASED ON SAMPLES TESTED IN 2017 468,400 Spicer Ring and Pinion Gears Spicer Ring and Pinion gears performed more than 2X better than the closest competitor
Transcript of SPICER RING AND PINION GEARING OUTPERFORMS THE … · ©Dana Limited 2018. SPICER® RING AND PINION...
©Dana Limited 2018.
SPICER® RING AND PINION GEARING OUTPERFORMS THE COMPETITION
Switch to a Better GearSpicer® ring and pinion gearing is the genuine gearing in all Dana manufactured axles. Why is it better than the competition? We’ll give you four good reasons:1. Heat Treatment 2. Face Hobbing 3. Shot Peening 4. Lapping
See the back of this sheet for comprehensive testing data.
»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»
Product information: Spicerparts.com | E-catalog and parts locator: DanaAftermarket.com
CYCLE TESTING: COMPETITIVE GEARS (LOW LOAD)
500,000
400,000
300,000
200,000
100,000
RIN
G G
EAR
CYC
LES
SpicerPart #2018747
Competitor A
33,720
Competitor B
195,720
Competitor C
196,680
COMPETITIVE GEAR TESTING RESULTS • AVERAGE CYCLES TO FAILURE – BASED ON SAMPLES TESTED IN 2017
468,400
Spicer Ring and Pinion
Gears
Spicer Ring and Pinion gears performed more than 2X better
than the closest competitor
RING AND PINIONGEARING
Dana Aftermarket GroupPO Box 1000 Maumee, Ohio 43537 Phone: 1.800.621.8084Product information: SpicerParts.comE-cat / parts locator: DanaAftermarket.com
For more information on Spicer products, visit www.SpicerParts.com.For our e-catalog and parts locator, visit www.DanaAftermarket.com.
»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»
Form # PERF-GEARTEST-102018 Copyright Dana Limited, 2018.All rights reserved. Dana Limited.Printed in U.S.A.
Spicer® Finishes First in Fatigue Tests
Like all Spicer® products, we put our ring and pinion gears to the test to see how they measure up against the competition. The result? When it comes to performance and durability, Spicer has no competition!
The Test:During fatigue tests, each gear is installed in a production axle attached to a dyno. The axle runs on the dyno until the gear fractures. The high-load test simulates a loaded vehicle going uphill or carrying extra capacity such as a trailer. The-low load test simulates everyday driving at an accelerated rate.
The Result:Under high-load conditions, Spicer ring and pinion gears lasted an average of 121,080 cycles—nearly three times as many cycles as the closest competitor. And under low-load conditions, Spicer ring and pinion gears performed more than twice as many cycles as the competition!
The Proof is in the Testing
Contact your Spicer Sales Representative for moreinformation about our industry-leading products.
CYCLE TESTING: COMPETITIVE GEARS (LOW LOAD)
500,000
400,000
300,000
200,000
100,000
RIN
G G
EAR
CYC
LES
SpicerPart #2018747
Competitor A
33,720
Competitor B
195,720
Competitor C
196,680
COMPETITIVE GEAR TESTING RESULTS • AVERAGE CYCLES TO FAILURE – BASED ON SAMPLES TESTED IN 2017
468,400
Spicer Ring and Pinion
Gears
Spicer Ring and Pinion gears performed more than 2X better
than the closest competitor
CYCLE TESTING: COMPETITIVE GEARS (HIGH LOAD)
125,000
100,000
75,000
50,000
25,000
RIN
G G
EAR
CYC
LES
SpicerPart #2018747
Competitor A
3,640
Competitor B
41,880
Competitor C
36,200
COMPETITIVE GEAR TESTING RESULTS • AVERAGE CYCLES TO FAILURE – BASED ON SAMPLES TESTED IN 2017
121,080
Spicer Ring and Pinion
Gears
Spicer Ring and Pinion gears performed nearly 3X better than the closest competitor
