SPECIFICATIONS

PURCHASE OF FURTHER MACHINERY

& EQUIPMENT FOR NEUROSURGERY DEPTT

ALLIED HOSPITAL, FAISALABAD.

OPENING OF TECHNICAL BID: 10.02.2016

Pre-Bid Meeting : 26.01.2016

Note: Standard Bidding Documents (Machinery & Equipment) can be download from Health Department Website at following link.

http://www.health.punjab.gov.pk/Notifications

TENDER FOR NEUROSURGERY DEPARTMENT, ALLIED HOSPITAL-FAISALABAD FOR THE YEAR 2015-16 (3rd)

Package 01. PRE-REQUISITE

The Firms are required to quote the complete package; incomplete package will straight away be rejected. For

completing the package the firm may form the joint venture with other firm but the leading firm must have 50%

share of the package.

The Manufacturer of quoted equipment mush be of USA, Europe or Japan origin only not incase not mentioned in

specifications.

The Medical Equipment of USA must have comply with 510 (K) FDA, in case of Europe MDD / CE and for Japan

MHLW for specific models. The other / non-medical equipment should comply with the relevant National /

International product quality standards.

The Bidder must be a manufacturer, sole agent or authorized distributor of the quoted product / brand. The bidder

must have reference site in Public / Private sector.

The firms must quote their leading brands from the above mentioned origins with the proven past performance

nationally and internationally. The Firm must possess its related back up support services including trained

engineers, workshop facilities, spare part availability and repair / calibration tools etc. The firm must attached at

least 03 references of Public Sector / Private Sector with tender.

The quoted brand /product must be installed and enjoy good reputation in Pakistan market for minimum one Year.

The firm’s should have proper infrastructure to handle and execute the complete package.

Neuro Navigation System (Latest & Advanced)

1. Uses:

A. All Type of Emergency & Scheduled Cranial Surgeries including Deep Brain Stimulation DBS Surgeries as well as

microscopic procedures.

B. All Types of Emergency & Scheduled Spinal Surgeries.

C. Quoted high end Neuro Navigation System must be of latest model, should ideally support Advanced Navigation in Cranial

& Spine Surgeries. Must support intra-operative imaging like iCT, iMRI, C-Arm etc.

D. System must navigate with precise accuracy through Advanced Optical Navigation Camera with Laser Pointer for easy

positioning and Latest Electromagnetic Tracking Technology for pin-less procedures.

2. Requirements

High performance Image-Guided-Surgery station, integrated in a mobile display cart with separate mobile

camera cart for flexible positioning of the infrared camera - featuring advanced optical, wireless passive marker tracking technology: for pre-op planning and surgical visualization. With UPS and Battery Back up.

a) Cranial Surgery software & Hardware; latest & up to date (or equivalent)

b) Deep Brain Stimulation Software and Hardware complete package; latest & up to date (or equivalent)

c) Image Merging Software to merge CT, MRI (T1, T2, Flare) PET, iCT, iMRI, Fluoro etc of brain and spine both on main

system; latest & up to date (or equivalent)

d) 3-D Navigation and volume rendering Software for brain and spine; latest & up to date (or equivalent)

e) Microscope interface for Zeiss.

f) Spine surgery software & hardware; latest & up to date (or equivalent)

3. Technical Specifications Two Cart System (or Equivalent):

I. The Monitor:

Built in wide & High Resolution Touch Screen Monitor 24 inch HD (with minimum 1920 x 1200 pixels) resolution;

should provides a brilliant display for the navigation.

II. Intra-operative Imaging’s Interface:

System should accept DICOM format Images from intra-operative MRI, intra-operative CT, and C-Arm / or Better

III. Imaging Interface:

System should accept standard DICOM format Images from MRI and CT Scanning Departments via CD/USB enabling

surgeon to plan surgery in advance on main navigation system.

IV. Workflow To provide a user friendly experience throughout set up, planning, navigation, shut down and transport.

V. Intelligent Design.

Compact Design with the small footprint; to make it easy to fit navigation system into the OR with built-in battery

backup to support during frequent power failures.

VI. Complete control

Surgeon should have control of the navigation system through touch screen and patient frame without

compromising the sterility.

VII. Staff Cart (220-240V @ 50-60 Hz)

a) Navigation visualization screen and camera with extended camera volume & equipped with built-in Laser Pointer for

precise & hassle free centering of the camera on the field of surgery.

b) Interface for transfer of exams via CD/USB

c) Bug Free Operating system

d) 8 GB Ram or more

e) 4 TB HD or more

f) Highest Graphic Processor with Highest Resolution.

g) DICOM query/retrieve compatible

h) Advanced Tracking Technology compatible

i) Intra Operative Imaging Systems compatible

viii) Surgeon Cart:

High resolution touch screen. Reflection free for best viewing from all angles. Flexible arm to move close to surgical

field to provide control and all information the surgeon needs where he needs it.

Neurosurgery Applications

A) Cranial Software:

Planning & Navigation in a single Module on Main Navigation Station.

The cranial navigation software offering Planning & Navigation. Customized for the surgeon to simplify and

standardize the entire navigation process, while in the Operating Room. Software should support Planning,

Registration in prone or any required position of the patient, Navigation, 3D and volumetric visualization engine

(volume rendering) to check and avoid vessels and probable bleeding points during surgery. The whole cranial setup

should allow the surgeon to easily register the patient in ANY position (specially in PRONE).

Including:

I. Procedure guided software (next/back buttons) with voice prompt, instruction window and task visualization.

II. Personalized equipment set up, instruments and navigation views.

III. Choice of different patient registration methods, allowing the end-user to modify any plan or trajectories on the main

navigation station intra-operatively.

IV. Supported surgical procedures like:

a) Frameless Brain Biopsy

b) Pin Less Procedures

c) Tumor resection

d) Shunt Placement

e) Navigated Neuro Endoscopy

f) Adult & Pediatric

B) Spine Software:

I. The spine navigation product offering software customized for the surgeon to simplify and standardize the

entire planning and navigation process.

II. Personalized Equipment Setup, Instruments and Navigation Views for each type of CT or Fluoro-Based

procedures (Cervical, Thoracic, and Lumber) including iCT & iMRI

III. Allowing seamless interface to a variety of C-arm Images from the C-arm should automatically be imported and

be calibrated for navigation use. Real time tool positions overlaid onto previously acquired images.

IV. Image calibration and navigation, allowing seamless interfacing to a variety of C-arms and Navigation “Real

Time Tool Positions”. Images from the C-arm are to be automatically imported and can be calibrated for

navigation use.

V. Compatible with Intra-operative CT, C-arms.

C) Cranial Instruments:

a) Articulated Arm

b) Mayfield Adapter

c) Passive Planar Blunt

d) MRI/CT Markers

e) Passive Cranial Frame

f) Sterile Spheres

g) Cranial Navigation Tray

h) Equipment Ref. Sheet

i) Skull Model with pre-loaded exam

D) Spine Instruments:

a) Compatible Interface for C-Arm / An interface for C-Arm 9” or 12”.

b) Spine Instruments Passive including accessories like:

c) Open Spine Clamp

d) Open Spine Clamp driver

e) Thoracic Clamp

f) Reference Frame

g) Passive Planer Ball Tip

h) Awl, Probe and Tap with trackers.

i) Spine model with holder & pre-loaded exam

E) Deep Brain Stimulation Software:

I. Stereotactic Planning Software with Functional Brain Atlas.

II. Advanced 3-D modeling capabilities and display of three orthogonal views

III. Multiple surgical plans with automatic calculation of frame settings

IV. Alternatives for anatomical structures localization such as predefined and customizable formulas, interactive Schaltenbr and-

Wahren Atlas and Talairach Grid.

V. Image reformatting relative to AC-PC line, so that functional targets are displayed relative to AC-PC

VI. Enhanced target localization by audiovisual integration of physiological signal and simultaneous display of recording position

VII. Automatic frame detection and registration of stereotactic frames

VIII. Support of all commonly used stereotactic frames (Leksell or Fischer Stereotactic Frames)

IX. Support Frameless DBS procedures, Depth Electrode and other stereotactic frame-based procedures

X. Preoperative verification of the surgical plan by virtual “probe’s eye view”

Mandatory Accessories

1. Universal Instrument Adapter System:Including:

I. Small, Medium and Large Passive Trackers

II. Small, Medium and Large Mounts

III. Mount Driver

IV. Sterilization Tray

2. Cranial Biopsy Instrument Kit: Including:

I. Articulated Arm

II. Mount, Double Star Adapter Mayfield

III. Biopsy Guide

IV. Probe

V. All Necessary Accessories

3. Microscope Integration Interface only.

I. Display of the microscope focal point on anatomical images

II. Display of ROI and Navigation symbols in oculars

III. Display of Navigation Monitor in oculars 1x Tracking Hardware (cables & bracket)

IV. Tracking Interface Hardware

4. IGS Disposables:

I. Disposable Reflective Markers / Spheres= 600pcs

II. Registration Markers (compatible with CT / MRI) = 200pcs

III. Biopsy Needles= 25 pcs

Optional Accessories with separate itemized Prices

1. DICOM Query / Retrieve Software:

With DICOM Query / Retrieve, to search, view and download patient exams directly from the hospital network to the

Navigation System.

I. Query of PACS systems for patient data

II. Push and pull patient data from PACS or single scanner location, from the main Navigation Station.

III. Conform to industry accepted DICOM standards

IV. DICOM receive from any DICOM storage class provider

V. Patient data viewing capability within the navigation application

2. Electromagnetic Tracking System for Pin-Less Cranial Navigation with All Necessary Accessories (hardware & software):

I. Quoted Navigation System must facilitate the end-user in pin less cranial procedures.

II. Technical & Commercial Offer must be inclusive of all the accessories (Hardware, Software, and Re- Usables &

Disposables).

III. Procedure Dedicated Kits Pediatric tumor resections as well as shunt replacements = 10 pcs each.

3. Planning Station:

Separate, Latest & Advanced Computer System for planning of navigated surgical procedures.

Including:

a) High-end Main CPU

b) Large Flat Display Screen.

c) Keyboard and Mouse.

d) Preloaded planning software for brain and spine.

4. DELETED AFTER PRE-BID

5. Computer networking. Icluding

Networking from Modular Operation Theatre to CT and MRI Rooms and Neurosurgery Ward.

Flat Screen branded PCs larest version No. 10

Server no 01

OFC outdoor Cable with Steel Armored 4 Core with Electric Cable 7/29 Flexible 2 Core (Pakistan) Gigabit Media Convertor MicroLink Single Mode Outdoor ODF 4 Core 4U wall mount Cabinet & Other Software & Hardware

NOTE:

a) Quoted System must be of Advanced & Latest version.

b) Quotation must cover Complete Equipment.

c) Quotation must cover Complete range of disposables / Kits

d) Quotation must provide all technical details up to the satisfaction of the end-user.

e) CE / FDA Approved

PAKAGE 02

PRE-REQUISITE

The Firms are required to quote the complete package; incomplete package will straight away be rejected. For

completing the package the firm may form the joint venture with other firm but the leading firm must have 50%

share of the package.

The Manufacturer of quoted equipment mush be of USA, Europe or Japan origin only not incase not mentioned in

specifications.

The Medical Equipment of USA must have comply with 510 (K) FDA, in case of Europe MDD / CE and for Japan

MHLW for specific models. The other / non-medical equipment should comply with the relevant National /

International product quality standards.

The Bidder must be a manufacturer, sole agent or authorized distributor of the quoted product / brand. The bidder

must have reference site in Public / Private sector.

The firms must quote their leading brands from the above mentioned origins with the proven past performance

nationally and internationally. The Firm must possess its related back up support services including trained

engineers, workshop facilities, spare part availability and repair / calibration tools etc. The firm must attached at

least 03 references of Public Sector / Private Sector with tender.

The quoted brand /product must be installed and enjoy good reputation in Pakistan market for minimum one Year.

The firm’s should have proper infrastructure to handle and execute the complete package.

01. FURNISHING OF MODULAR ICU

Fabrication / Wall Paneling System

Fabrication / Wall panels type should be Painted steel/Stainless steel/HPL/uPVC or better material

The modular sub-structure system consists of wall panels over the total room height up to false ceiling.

The wall panel system should have prevision to modify at any time on demand.

Total Height of the panel should be 3000 mm (or according to height of concrete ceiling)

The wall panels should be Nonconductive and Bacteriostatic, powder-coated with polyurethane finish.

The wall panels should be in one piece to avoid joints and free of Screws

Silicone in between the joints should not more than 4mm

The U-profile Should non-lacquered steel/Aluminum sheet of 1 mm

The floor rail aligned to the bare floor and mount with screws.

There should be special formed strip to be installed for flooring to void the corners.

The wall panel system should easily dismantle and reassemble from the ceiling and floor system.

Round corners of wall to avoid contamination and easy cleaning.

FALSE CEILING

The false ceiling system provides the integration of all components of ceiling into ICU with rigid frame of

Galvanized Steel profile for its perfect installation.

Suspended ceiling perimeter profile with integral coving for the Wall Cladding and Partition System, made

of painted steel of 0.8mm orbetter with a durable thermosetting epoxy powder coating.

General lights integrate into the frame system of false ceiling which is perfectly sealed.The false ceiling

frame system should provide the seamless and air sealed coverage of all gaps.Wide radius cross-section,

clipped into the suspended ceiling perimeter rigid support profile.

Air tight ceiling panels round finish on the corners of the

The ceiling panel size should be 600 x 600 mm or better and fixable with appropriate suspension system.

As per Drawings

ILLUMINARIES

The luminaire specifically designed for ICU

Frame should be Zinc coated CRCA sheet steel finished in epoxy polyester powder coated of 25 micron

thickness or better.

Flush with false ceiling

IP rating should be 65

Light box should be compatible with false ceiling

X-RAY VIEWING SCREEN (01 No only)

X-ray viewer in flush-mounting design co-planar to the finishing panel designed to provide a high level of

control luminance without flickers from a unit that should easy to clean

The X-ray viewing screen illumination will be high frequency fluorescent lamps controlled by demining

control

Frontal surround in stainless steel with stainless steel finished with durable thermosetting epoxy powder

coating in RAL without edge and welded joint with hygienic properties.

Clip for mounting and demounting the x-ray films

Dimensions should be for 4 x-ray films

ANTISTATIC VINYL FLOORING

Thickness: 2 / 3mm

Anti-Bacterial/fungicidal treated vinyl flooring, to provide a hygienic surface, selected floor coverings are

impregnated with anti-bacterial and fungicidal treatment.

The antibacterial floor coverings are welded together to provide perfect air tightness for greater hygiene.

Hot welded for perfect water tightness.

The coving system (3 inch on wall) makes it easier to clean inside angles and edges.

High performance flexible homogeneous vinyl flooring for Hospitals.

AUTOMATIC SLIDING DOOR (At Main Entrance of ICU) (01 No)

Clear Opening in mm. 1400 x 2100 or better

The Sliding doors maintain the correct air pressure in the department doors into and out of the ICU and

ancillary rooms. The sliding doors are flash type and hermetically sealing type.

Sliding doors should electrically operate with battery backup.

Automatic Door should constitute of sandwich panel of thickness min. 40 mm or better,

/HPL/uPVC/Painted Stainless steel should have thickness 0.8mm/3mm

Manual opening in case of power failure.

HINGED DOOR (Emergency Exit) (01 No)

Single leaf hinged door of thickness 40 mm.

Door leaf should have two sided painted steel sheets/SMS/HPL/uPVC of thickness 0.8mm/3mm.

Two part frame counter frame adapted to wall thickness.

Frame fabricated in bended zinc coated epoxy powder coated same as wall panels.

Standard dimensions 800mm x 2100mm

BUILTIN CABINIT FOR MEDICINE STORAGE (01 No)

Flush Mounted Cabinet for Medicine Storage in Wall Panels of ICU

Size 900mm x 2100mm x 580mm or better

Storage Cabinet made of stainless steel, Gauge AISI 304, Thickness 1mm with durable thermosetting

epoxy powder coating with same color as wall panels.

Tall cabinet with 2 leaf doors each, sealed all round.

The cabinet has 4 stainless steel shelves with height adjustable

CEILING MOUNTED BEAM SYSTEMFOR ICU (01 System) for 04 Beds

State of Art Latestbeam system installed in Ceiling continuous length of 9000 mm with torque at ceiling

Max 1000 Nm or better

Beam should be divided to occupy 04 beds of equal length and each bed should have 01 Shuttle / Column

on Dry side and one on Wet Side.

Column/shuttle should be installed on each side of bed having length of 2000 mm or better

Each Column/shuttle should have load capacity of 140 KG or more

Shuttles / Column should be moveable / adjustable to each side of beam.

Column/Shuttle should be rotatable at 330 Deg. C

RGB (Red, Green, Blue) Light should be available on beam with RGB Control Panel.

There should be night light in the Top of Beam

Each Column / Shuttle on Dry Side should have:

02 X O2 Outlets

02 X Air Outlets

08 X Electrical Sockets BS type

01 X Monitor Stand Swivel Type with proper Mounting system for Patient Monitors

01 X Hanger / Mount for ICU Ventilator. (Ventilators should be properly mount on workstation/column)

Each Column / Shuttle on Wet Side should have:

02 X O2 Outlets

02 X Air Outlets

08 X Electrical Sockets BS type

Standard Rail/Pole Mount on full length of Column/Shuttle to mount Syringe Pumps and Infusion Pumps

01 X shelf

01 X Venturi Suction with Collection of Jar of at least 02 liter complete with fitting should be attached with

each unit

01 X Oxygen Flow meter with 250 CC humidifier bottle should be connected with each unit

VERTICAL TYPE PENDANTS (02 Nos)

State of Art Latest Vertical Type Pendant of anodized aluminum material or better with load capacity of

140 KG or more.

Shelf for Ventilator with drawer.

Pole Mounting to attach various Syringe and Infusion Pumps

Monitor Stand integrated / connected with Pole Mount to hang patient monitor and accessories

Cable Management System for smooth ergonomic and flow of work

Direct and Indirect Lighting System on Column

Examination / Reading Light

Gas outlets with complete fitting DIN/BS standard (02 X Oxygen , 02 X compressed Air, 01 x Vacuum)

08 X BS Type Electrical Sockets

Total Length Vertically 1300 mm or more

01 X Venturi Suction with Collection of Jar of at least 02 liter complete with fitting should be attached with

each unit

01 X Oxygen Flow meter with 250 CC humidifier bottle should be connected with each unit

02. BED SIDE MONITORS

Modular Bedside monitor for display of Vital Sign monitoring of Adult, Neonate, Paeds.

08 Nos.

The Monitor should have plug in modules / pods for measurement, recording and display of different Vital Signs.

Mounted on Vertical Pendants

Monitor should be compatible with Hospital Information System, Laboratory Information System and Radiology Information System for bi-directional flow of data and images.

Monitors should be connected with Central Station wirelessly/wired

Battery Backup for at least 02 hours Operating Features and Characteristics:

Non fade TFT color display

Electro-surgical interference suppression/protection

Defibrillator protection

Freeze and cascade facility.

Waveform traces speed; 25 / 50mm/sec.

Screen size: min. 19” TFT/LCD color display Touch Screen Display.

Should be supplied with Key Board and Mouse PARAMETERS ECG:

Numeric: heart rate.

Waveform: Six Wave forms minimum, Real time and freeze ECG trace

Measuring Range : 15 to 300 bpm NON-INVASIVE BLOOD PRESSURE (NIBP):

Method: Oscillometric principle

Numeric: systolic, diastolic and mean pressure

Selectable auto inflate interval settings

Rising cuff/continuous pressure display. TEMPERATURE:

Numeric: temperature selectable in ºC/ºF. PULSE OXIMETRY:

Numeric: 0-100% oxygen saturation measuring range.

Waveform-plethysmograph pulse with pulse strength indication.

Masimo Technology with motion tolerance ARRHYTHMIA ANALYSIS:

Arrhythmia analysis and ST analysis. RESPIRATION:

Breath rate display and settable apnea alarms.

Sweep speed; 6.25, 12.5 mm/sec. OTHER FEATURES:

Trend data; graphical and tabular

CAPNOGRAPHY (ETCO2)

For measuring of End Tidal CO2

Capability of Main and Side Stream measurements.

NOTE: The system must be complete with all sensors, probes, cables or any other accessories required for measuring all the above selected parameters for Adult & Pediatric Applications.

CENTRAL MONITORING SYSTEM

Multi-Channel Central Station to monitor different patient data centrally.

Central Station should be connected with above mentioned monitors wirelessly/wired

Supplied with Sine Wave UPS for battery backup Operating features and characteristics:

Colored monitor with Min 22” Color Touch Screen Display

Laser printer Latest Version HP

Bed Side Connection: 16 Bed Side Monitors and will able to enhance up to 32 patient monitors.

Trend Display of 120 Hours

Event and Full Disclosure for up to 16 waveforms.

HL7 Interface Parameters:

Selectable display of all parameters of bedside monitors

As selected. Alarms:

01

All parameters alarms on central station monitor with bed no.

Identification.

All alarms of each bedside monitors selectable from central workstation. Firm is bound to install 02 X 55” or more LED Displays and will install at two different places as per users recommendation and both displays will be connected to Central Station for live viewing and Monitoring of each patients. Installation of Network cables as per International standards will be responsibility of firm.

03. ICU VENTILATOR Patient Range: Pediatric and Adult. Breathing Classification: Pressure Controlled / Volume Controlled / Time Cycled Modes of Ventilation: Volume Control CMV Pressure Controlled-Assisted control Pressure Support CPAP, PC-BiPAP SIMV Non-Invasive Ventilation Measurement Range / Specification: Tidal Volume : 20 – 2000 ml or better Respiratory rate : 2 – 80/min or better SIMV Breath Frequency Peak Inspiratory Pressure Inspiratory Time I: E Ratio : 1: 150 to 150: 1 PEEP : 0 – 40 cm H2O FiO2 : 21 – 100 % Monitored Parameters with Digital / Graphic Display: Total Breath Rate, Plateau Pressure / Rise Time, Oxygen Concentration FiO2, Expired Tidal Volume, Expired Minute Volume, I: E Ratio, Peak Pressure, Mean Pressure, Base Pressure / Pressure at End Exhalation

06 Nos.

Other Controls and Functions: Back Up Apnea Ventilation Microprocessor Control Unit Breath Circuit Compliance Compensation Expiratory Hold / Inspiratory Hold Built in Nebulizer Built / Integrated CO2 Monitoring Negative Inspiratory Force (NIF) Mounted on above mentioned Pendants/Beams as mentioned above. Paramagnetic Type Flow Sensor Alarms: Apnea, High and Low Expired Minute Volume, High and Low Airway Pressure, FiO2 Concentration, Gas Supply Source, Low Battery Nurse call Power Supply: 220 V, 50 Hz Built in turbine system or complete with separate compatible air compressor Back Up min 45 mins or more for complete functioning of ventilator Lung Mechanics/Loops,Trends and Curve display Graphics Display Monitor: Touch TFT/LCD Monitor 12 inches or more At Least Three Waveforms for Pressure, Flow, Volume With Monitoring of Airway, Resistance and Compliance Patient Breathing Circuit: Autoclaveable Reusable Patient Tubing Circuit with Water Traps in Patient Breathing Circuit for Pediatric and Adult Application Note: Demonstration is necessary if required by users.

04. ICU BEDS

ICU bed with Bed Side Cabinet and over bed table.

Motorized Hospital bed suitable for use intensive care unit within built battery backup.

Adult ICU bed with head and foot panels.

Height adjustable remote hand held and nurse control panel.

08 Nos.

Position trendelenburg, anti trendelenburg, High, low, head raise, knee raise and cardiac chair.

Motorized assets control and X ray radiolucent backrest for imaging.

Castors of antistatic material, foot operated brake to lock the castors, provide easy steering.

Reversible matters with internal hinge and standard water cover with bed safe working load 220kg.

With bed extension facility.

Collapsible side rails pair slide down.

Hydraulic / Gas spring over bed table.

I.V Rod.

Removable Head and foot end with locking system.

CPR board.

With bed side cabinet.

Bedside cabinet, over bed table and mattress and other accessories should be same manufacturer.

05. NURSING STATION (LOCAL)

State of Art Nursing Station Made of Wooden Material or better

Nursing Station with at least 5 Big Drawers

Have a complete fitting for Central station

Front Side covered with Glass

Note: Hospital will provide drawing / layout for Nursing Station which should be supplied by bidders. Nursing Station should be according to entire satisfaction of end users / hospital administration.

01

06. CELING MOUNTED AIR CONDITIONING

Ceiling Mounted Air Condition of at least 4 Ton or more

Fixed in ceiling and Flush with False Ceiling

Orient / Mitsubishi / Acson

03 Nos.

07. UPS

Pure Sine Wave UPS for General Lighting in ICU Room

02 Nos.

08. INFUSION PUMP

Automatic rate calculation by calculating volume over time

Dose rate mode:

Automatic calculation of delivery rate in ml/h based on the entry of drug concentration in conjunction with the desired dose rate

08 Nos.

(e.g.: ml/kg/min)

Drug Library:

Up to 720 drug names including therapy data and information can be stored in 15 categories

Drug specific soft and hard limits as well as default values can be specified

Current (primary) infusion temporarily in order to administer a piggyback (secondary) infusion

Safety concept

Device-based anti-free flow clamp for maximum security against free flow when pump door is opened or infusion line removed

Automatic bolus reduction triggered by occlusion alarm

Additional upstream pressure sensor detects upstream occlusions

Data lock on 2 safety levels (parameters and disposables lockable)

LED alarm indicator with clear alarm message in display

Drug specific acoustic alarm priorities can be specified

09. SYRINGE PUMP

Syringe pump for fluid administration

HD LCD Display.

Flow Rates: 0.1 - 1200 ml/hr.

Working mode: rate mode, time volume mode, dosage weight mode.

KVO and bolus function.

Universal Syringe acceptance capability for disposable, Plastic,

Approx. Size, 5, 10, 20, 30, 50/60 ml.

Drive Accuracy. ±2%

Drug Library for 650 drugs.

Volume limit range: 0.1 to 1999 ml

KVO rate: 1ml/h

Dose Rate Calculation.

Automatic adaptation of controls according to syringe.

Quick freed/rapid infusion facility.

KVO mode

Audible and Visual alarm: injection begins, near empty, empty, end of infusion, occlusion, syringe loose, syringe improper installation, wrong setting and low battery.

Rechargeable battery 10hours and mains operated 220V, 50Hz

16 Nos.

10. CCTV Camera System for ICU One Set

CCTV System to be install in ICU for live viewing of whole ICU in Control Room / Professor Room.

HD Type CCTV Night Vision Camera System.

Rotatable Camera

Control Room with Display of at least 32” Display LED

Recording System

NVR

Flat Screen LED Branded PC with Software 02

Complete

11 Patient Repositioning/ Integraded Patient Lifting Solution. Patinet Lifting System Sling with two padded legstraps, padded shoulder support in white Nylon-Mesh Material, two stays in the Neck Section, Sling for 4 Point Patient Positioner with loops or clips.