By Robert John

While Canon's automated printers and scanners are highly advanced,there can still be several errors. One of the most common errors,

however, is Canon Printer Error 6000 that a user has to deal with quiteoften. In this guide, we have compiled methods to fix printer error 6000on Canon Pixma and other essentials you must know. How to Fix CanonPrinter Error Code 6000. There are so many hacks to fix the error 6000.Follow these steps and you can get your solution to fix the error 6000.

So, start reading:

How to Fix Canon Printer Error 6000

Reasons that make Canon PrinterError 6000.

The feed tray of the printer is improper fittedA large number of documents near the printerThe line feed is scratched or smearedGiving multiple paper print commands at onceFaults within the sensor unit or in-line feed slit.

Before jumping into the solutions, You should know the reasons for theerror 6000.

Hacks To Fix Canon Printer Error6000:

First of all, unplug your Printer from the Power button.Then, leave it for a few seconds in the Pause Mode.After that, plug the power cord into the power plug and turn on the printer.Now, press and hold the power button for some time.Next, press the Stop button twice.Repeat this procedure one more time. At this time, release the Power button.Now, press the Stop button four times.Finally, check if the issue persists or not.

Hack 1: Reset or Restart the Printer:

To Reset or Restart your printer might help you to resolve the error 6000. To do so,you need to go through the below steps:

1.2.3.4.5.6.7.8.

Open the door to access the stuck paper in between the rollers.Pull out the papers. And if you are not able to remove the stuck paper, then move tostep 3.From the menu shown in the display, search for service mode.Pull out the paper in service mode as now the distance between rollers will increase.

Firstly, click on the Start menu.Type 'device manager' there and open the Device Manager.Now, expand the category 'Network Adapters' and select your device.Right-click on the device icon.After that, click on the Update Driver option and choose 'Search automatically forupdated driver software.At last, confirm it by pressing the Ok button and wait for a few moments.After completing this process, turn on your device again and check if the issue isresolved or not.

Hack 2: Remove Paper Jam:1.2.

3.4.

Hack 3: Update the Device Driver:You can fix this issue by updating the device driver. Therefore, you need to follow theinstructions mentioned below:

1.2.3.4.5.

6.7.

Switch on the printer and put it into service mode.Open the doors of the printer and remove any obstacles in between.And remove the rollers and clean them using cotton with 10% alcohol.Reinstall the rollers and restart the printer.Test print a document and check if it working now.

Go to the printer window and select 'Preferences.After that, click on the 'Printer Properties option.Then, choose 'Advanced'.When the printer's advanced properties window appears, click on 'Paper size' to set thenew custom size.

Hack 4: Clean Rollers and Remove Blockage:

Hack 5: Insert a Paper:While you want to get different copies at a time, then it makes a harmful effect on paperscanning. To resolve this, follow the directions:

1.2.3.4.

In the above article, we will discuss all solutions to the Canon Printer Error 6000. If you haveany doubts, you can put comments in the below section.

CONTACT HERE

BLOG -https://www.printererrorsupport.com/blog/how-to-fix-canon-printer-error-code-6000/

By Robert John