Solicitation Number 2021-51 Invitation to Bid thfor NE 18 ...

Solicitation Number 2021-51 Invitation to Bid for NE 18th Street Tenant Improvement Contractor Addendum 1 – November 15, 2021

QUESTIONS

1. What is the engineers estimate or cost range for this project if one isavailable?

Answer:

The cost estimate for this project is between $450,000 to $550,000.

2. What is the construction schedule?

Answer:

Refer to section 6.4 Time of Completion for the completion timeline of this project.

3. Is there internal roof access within this facility?

Answer:

There is no internal roof access to the building. The primary access to the roof isusing the north side of the building.

4. DELETION AND ADDITION:

The solicitation schedule is hereby deleted in its entirety per addendum 1 andreplaced per Addendum 1.

ITB Advertised: November 3, 2021

Pre-Bid/Site Visit: November 9, 2021, 10:00 a.m. – 11:00 a.m.

Second Pre-Bid/Site Visit November 17, 2021 1:00 p.m. – 2:00 p.m.

Questions Due: November 24, 2021, 12:00 p.m.

Bid Opening:

Contract Award:

December 16, 2021, 3:00 p.m.

December 22, 2021

Contract Protest Period Ends: December 29, 2021

Notice to Proceed: January 3, 2022

5. What is the actual depth of the new Asphalt?

A501

6. C-TRAN has received a substitution request for lighting. Enclosed as part of thisaddendum is the determination of this substitution. This is incorporated asAddendum 1, Attachment 1.

Date: 11/15/2021 Project No.: 2021-00413

SEND TO:

Fax:

QUANTITYDOCUMENT

DATENO.

1 11/15/2021 1

COPY TO: SIGNED BY: K.W. Gassman

ENCLOSED ARE THE FOLLOWING:

Ph:

REMARKS

ADDITIONAL RECIPIENTS

THESE ARE TRANSMITTED AS CHECKED BELOW:

Signature of Recipient:

DESCRIPTION

Lighting Substitution Submittal - Reviewed

LETTER OF TRANSMITTAL

106 Decker Drive, Suite 200,Irving, Texas 75062 C-Tran, 18th St. Tenant Improvement - Lighting Substitution

Electronic Submittal

Method of Delivery OptionsMark Knoke

Attention: Mark Knoke

972.812.1270

Regarding

EXCEPTIONS NOTED, RESUBMITTAL NOT REQ'D

REPORT(S)

AS-BUILTS

CHANGE ORDER

PLANS

SUBMITTALSSAMPLES

SPECIFICATIONS

COPY OF LETTER

SHOP DRAWINGS

FOR REVIEW AND COMMENT

REVIEWED

AS REQUESTED

FOR YOUR USE

FOR APPROVAL

EXCEPTIONS NOTED, RESUBMIT

NO EXCEPTIONS TAKEN

NOT ACCEPTABLE

RETURN CORRECTED PRINTS

SUBMIT FOR DISTRIBUTION

RESUBMIT FOR APPROVAL

REJECTED

OTHER

ADDENDUM 1, ATTACHMENT 1

106 Decker Drive, Suite 200

Irving, Texas 75062

PHONE 972-812-1270

SUBMITTAL REVIEW

No Exceptions Taken Resubmit Make Corrections Noted Rejected Submit Specified Items Do Not Resubmit

Title: Lighting Substitution Submittal Engineer’s Review is only for general conformance with the design concept of the project and general compliance with the information given in the Contract Documents. Any Action shown is subject to the requirements of the Contract Documents. The contractor is responsible for dimensions which shall be confirmed and correlated at the jobsite, fabrication processes, techniques of construction, coordination of his work with other trades, and the satisfactory performance of his work.

Project: C-Tran, 18th St. Tenant

ImprovementSALAS O’BRIEN | expect a difference |

Project No.: 2021-00413 Date: 11/15/2021

Copies: By: Matthew Nelson

COMMENTS:

1) Battery backup option for type A fixture is only required for light fixtures labeled AE on electricaldrawings. All fixtures labeled as A on electrical drawings do not need battery backup option.

2) Fixture type B will need battery backup option. If one is not available for light fixture, a separate battery

pack will need to be installed with lights labeled BE on electrical drawings or a different fixture will needto be selected with battery backup option available. Please submit either separate battery pack or

different fixture.

3) Light fixtures were not reviewed for final finishes.


The Lighting Project

315 Columbia St.

Vancouver WA 98660

360.314.4100

www.tlpnw.com

C-TRAN 18th Street Tenant Improvement

Luminaire Prior Approvals

November 10th, 2021


Date: Nov 10, 2021

The Lighting Project NW315 Columbia StreetVancouver WA 98660Phone: (360) 314-4100Fax:

Job NameC-TRAN 18th Street Tenant Improvement - Lighting Substitutions

TLPNW21-18584

Bid DateDec 3, 2021

Submittal DateNov 10, 2021


Date: Nov 10, 2021 Page 1/1

TransmittalThe Lighting Project NW315 Columbia StreetVancouver WA 98660Phone: (360) 314-4100From: Austyn Parks

FF00009 Page 1/1The Lighting Project

Project C-TRAN 18th Street Tenant Improvement - Lighting Substitutions

Quote# TLPNW21-18584Location

Contact:

ATTACHED WE ARE SENDING YOU 1 COPY OF THE FOLLOWING ITEM:Drawings Specifications Other: Prints InformationPlans Submittals

THESE ARE TRANSMITTED FOR:Prior Approval Resubmittal for Approval RecordApproval Corrections Bids due on: Approval as Submitted Your Use Other: Approval as Noted Review and Comment

Type MFG PartA Columbia Lighting SLK24-40LW-EDU

TrofferB Columbia Lighting CVT4-LS40

Surface MountCE H.E.Williams 6DR-TL-L15/840-EM/7W-DIM-UNV-TRIM

DownlightDE Columbia Lighting CWM2-30VWSM-FRFA-EDU-ELL14

Surface Mount


of 2

SUBSTITUTION REQUEST FORM

TO:

PROJECT:

We hereby submit for your consideration the following product instead of the specified item for the above noted project:

Section Paragraph Specified Item

Proposed Substitution: Manufacturer Model No.

Attach complete technical data, including laboratory tests, if applicable.

Attach complete information on changes to Drawings and/or Specifications that proposed substitutions will require for its proper installation.

Submit with request all necessary samples and substantiating data to prove equal quality and performance to that which is specified. Clearly mark manufacturer's literature to indicate quality in performance.

Fill in Blanks Below:

A. Does the substitution affect dimensions shown on drawings? No YesIf yes, clearly indicate changes.

B. Will the undersigned pay for changes to the building design, including engineering and detailing costs caused by the requested substitution?

C. What affect does substitution have on other trades?

D. What affect does substitution have on applicable code requirements?

E. Differences between proposed substitution and specified item?

F. Manufacturer's guarantees of the proposed and specified items are: Same ___Different(explain on attachment)


Salas O'Brien, Skyward Construction

2.01

Type: A

265113

X

N/A

N/A

N/A

Manufacturer

Columbia SLK24

Philips Evo


of 2

CERTIFICATION OF EQUAL PERFORMANCE For Use by Design Consultant:AND ASSUMPTION OF LIABILITY FOREQUAL PERFORMANCE ___Accepted ___Accepted as Noted

___Not Accepted ___Received Too Late

___Approved as alternate - See bid form

By

Date

Remarks

The undersigned states that the function, appearance and quality are equivalent or superior to the specified item.

Submitted by:

Signature: Title:

Firm:

Address:

Telephone: Date:

Signature must be by person having authority to legally bind his/her firm to the above terms. Failure to provide legally binding signature will result in retraction of approval.

Substitution Form-2001

Austyn Parks

The Lighting Project (TLP)

315 Columbia ST, Vancouver WA

(503)-502-1738 11/10/2021

Specification support


Submitted by The Lighting Project NW

Job Name: C-TRAN 18th Street Tenant Improvement -Lighting Substitutions

Catalog Number:SLK24-40LW-EDU

Notes:

Type:

ATLPNW21-18584

© 2021 Columbia Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice. 701 Millennium Blvd • Greenville, SC 29607 / Tel 864.678.1000 / Website www.columbialighting.com

Page 1/7 Rev. 10/05/21COL_SLK24_S

SLK242'X4' LED TROFFER RETROFIT KIT

FEATURES PH

OTO

METRY

BRO

CHU

RE

DIM

ENSIO

NAL D

RAWIN

GS

SPECTRASYN

C FAQ

NX IN

-FIXTURE SO

LUTIO

N G

UID

E

DATE: LOCATION:

TYPE: PROJECT:

CONSTRUCTION• Retrofit kit reflectors, ends, frame and rails

are manufactured from die formed code gauge cold rolled steel

• High transmission extruded acrylic features linear prisms with custom frost for high efficacy and reduced pixelation

• All reflective surfaces are finished after fabrication with unique formula high reflectivity matte white paint for soft, uniform indirect illumination

• Minimum dimensional requirements are listed on page 6. Columbia Lighting recommends a trial installation prior to ordering project quantities

• SLK retrofit kits are designed to fit into most parabolic and lensed troffers with a housing depth of 3 1/8" or greater

• This product is not suitable for air handling units

OPTICS• Removable lens for easy access to LED

module and electrical components

INSTALLATION• Mounting rails and hardware are furnished

with each luminaire for easy installation

• Fixture can be hinged from either side for easy access to LED components and electrical components

Color Tuning Technology

™

CERTIFICATIONS (CONTINUED)• DLC® (DesignLights Consortium)

Qualified, with some Premium Qualified configurations. Please refer to the DLC website for specific product qualifications at www.designlights.org

• NX is available in U.S., Canada and Mexico. For other locations consult factory

• The DTS, Dimming Bypass Module, is for emergency circuit control loads including sensors and wireless systems CSA certified to UL 924. See page 7 for wiring diagram. Link to Dimming Bypass Module Specification sheet

• This product qualifies as a “designated country construction material” per FAR 52.225-11 Buy American-Construction Materials under Trade Agreements effective 06/01/2020. See Buy American Solutions

WARRANTY• 5 year warranty

• See HLI Standard Warranty for additional information

SPECIFICATIONSELECTRICAL• Maintains insulation contact (IC) rating

of existing fixture; note that IC label is void if product is installed on site with a combination of both step-dimming (ESD) driver plus through wiring

CONTROLS• Optional SpectraSync™ offers two modes

of Tunable White solutions and integrates seamlessly into a variety of control systems

• NX Distributed Intelligence™ provides options for standalone and networked integrated sensor with wired or wireless connectivity for NX system deployments

CERTIFICATIONS• All luminaires are built to UL 1598 and 2108

standards, and bear appropriate CSA labels

• Damp location label standard

• Emergency-equipped fixtures are Dry Location unless specified

• CSA certified to UL 924 standards with battery pack or DTS (Dimming Bypass Module) options

• Adheres to LM79, LM80, and TM21 industry standards for photometrics and lifetime calculations

KEY DATA

Lumen Range 2341–6200

Wattage Range 19–44

Efficacy Range (LPW) 112–141

Reported Life (Hours) L80/60,000

CONTROLS TECHNOLOGY

CATALOG #:

SLK22

RELATED PRODUCTS

• Contemporary style LED retrofit for existing 2x4 prismatic or parabolic troffers with depth 3-1/8" or greater

• 83 CRI standard or optional 90 CRI for color sensitive applications

• Fully integrated hinged door assembly allows for easy installation and rapid troffer conversion

• Reduces job site waste by reusing existing fixture housing

• High efficiency acrylic center lens features linear prisms for high performance without pixelation

• Optional architecturally styled integration of daylight and occupancy sensor(s)

Built toUL 924

Standards

See Certification Specifications

BUY AMERICANSOLUTIONS

Index Page1/7Submitted On: Nov 10, 2021





Notes:

Type:

ATLPNW21-18584




ORDERING GUIDEExample: SLK24–35HL–EDU

CATALOG #

DATE: LOCATION:

TYPE: PROJECT:

CATALOG #:

SLK24 – – – –Model CRI Color Temp Delivered Lumens 3 Shielding Driver Voltage

SLK242'x4' LED Troffer Conversion Kit

Blank >809 90 1

30 3000K35 3500K40 4000K50 5000K2750T 2700K–5000K SpectraSync™

Tunable White 2

2765T 2700K–6500K SpectraSync™ Tunable White 2

XW 2341–2732XWHE 2458–2754VW 3124–3558VWHE 3279–3770MW 3363–3744MWHE 3660–4234LW 4268–4860ML 4771–5434HL 5443–6200

Blank Curve

R Rectangular

E Fixed Output 8

ED 0-10V DimmingED1 0-10V 1% DimmingEDD 0-10V Dim-to-Dark 8

ESD Step Dimming 4,5,8

LUTH Hi-lume 1% EcoSystem LED driver with Soft-on, Fade-to-Black dimming technology 4,5,8

DALIP DALI Power Bus 6

U 120–277347 347

–Options Control Options

ELL14 Emergency Battery Pack Installed, 1400 Lumens 5

DTS Dimming Bypass Module 7

NX StandaloneNXS NX, PIR BT Occupancy/Daylight Sensor, Slide Mount 5,8, 9,10,11

Third-Party Control OptionsODPG Occupancy and Daylight Sensors w/ Grouping, Philips SNS200 5,12,14

LVS Lutron Vive Wireless DFCSJ-OEM-OCC In-Fixture Control with Daylight and Occupancy Sensing 12,13,14

LVR Lutron Vive Wireless DFCSJ-OEM-RF In-Fixture Control (RF only) 12,13,14

ZRE ZRE ControlScope® compatible 14,15

Notes:1 Not available with HE lumen output2 Available with ED driver and 80 CRI only, N/A with HE lumen outputs3 High efficacy versions designated with “HE”4 Limitations apply based on lumen packages (see Driver Table)5 Not available in 347V6 DALIP only available when LVS, LVR or ODPG control options are selected7 For emergency circuit control loads including sensors and wireless systems CSA certified to

UL 924. Only available with 0-10V drivers. Universal voltage only. See page 7 for wiring diagram

NX In-Fixture Control Options:8 NX is available with ED and ED1 drivers only9 Not available with ESD Step Dimming10 Only available with 0-10V Dimming (ED) Driver Option11 NX controls can only be used with NX Sensor optionsThird-Party Control Options:12 LVS, LVR and ODPG only available with DALIP driver option13 VIVE is a trademark of Lutron Electronics Co., Inc14 Not available with SpectraSync (2750T or 2765T)15 Registered trademark of Daintree Networks, used by permissionFor questions about configuration options, contact Hubbell Representative

Options listed below are available for the outputs as shown.

PRODUCT EXCEPTIONS & DETAILS

DRIVER AVAILABILITY TABLEXW XWHE VW VWHE MW MWHE LW ML HL

E X X X X X X X X XED X X X X X X X X XED1 X X X X X X X X XEDD X X X X XESD X X X X X

LUTH X X X X X XDALIP X X X X X X X

347 X X X X X X






Notes:

Type:

ATLPNW21-18584




DATE: LOCATION:

TYPE: PROJECT:

CATALOG #:

CONTROLS

™

N

X Design & Application G

uide

NX Brochure

NX INTEGRATED CONTROLS REFERENCE

NX Option Sensor Networkable Scheduling Occupancy Daylight Harvesting

0–10V Dimming

On/off Control

Bluetooth® App Programming

NX Standalone

NXS NXSMP-SMI No Yes Yes Yes Yes Yes Yes

NX Distributed Intelligence™ Lighting Controls:Supports both indoor and outdoor applications in a variety of deployment options- wired, wireless, hybrid. Integrates with and enables a wide array of luminaires including those with SpectraSync™ Color Tuning Technology.

Philips SN

S200

EasySense Design-in G

uide

Philips EasySense Controls ODPG Sensor:

• Occupancy sensing, daylight harvesting, task tuning and grouping in one device• Standalone control or grouping to wireless switches 1

• Uses Philips field apps for on site commissioning2,3

• Ability to create scenes for various room configurations• Cost-effective solution for energy-savings and code-compliancy strategies• DLC® Qualified: Listed on the QPL for Networked Lighting Controls. Please refer to the DLC website for specific product qualifications at www.designlights.org

1 Wireless switches only compatible with ODPG Philips EasySense2 See link to Philips commssioning3 Requires android device or IR dongle. See links for phone compatiblity and IR dongle

Wireless Switch Accessories1

PESR-WH EasySense compatible wireless single rocker switch, white

PEDR-WH EasySense compatible wireless dual rocker switch, white






Notes:

Type:

ATLPNW21-18584




CONTROLS (CONTINUED)

DATE: LOCATION:

TYPE: PROJECT:

CATALOG #:

DELIVERED LUMENS, SPECTRASYNC™ Color Tuning Technology

SPECTRASYNC COLOR TUNING TECHNOLOGY

Mode Kelvin Range Description

Tunable White 2700K–5000K2700K–6500K

Offers users the ability to tailor CCT to their personal preference, enhancing task visibility, material and colors or the aesthetics of the space


SpectraSync

N

X Solutions Guide

SpectraSync Tunable WhiteAvailable in two options: 2750T (2700K–5000K) or 2765T (2700K–6500K). Requires two 0–10V controllers, one for intensity and one for CCT. Minimum 5% dimming.

To enable scheduling and for use with NX wall control preset stations please refer to Hubbell Control Solutions NX SpectraSync technical sheet.

100%

Channel 1

Channel 2

Control Input (Vdc)

Out

put (

% o

f tot

al d

river

cur

rent

)

Color Tuning Pro�le

90%

80%

70%

60%

50%

40%

30%

20%

10%

0%0 1 2 3 4 5 6 7 8 9 10

SpectraSync Tunable White luminaires are provided with two 0–10V circuits. The violet and pink circuit is for wiring to any qualified 0–10V controller for dimming. The violet/white and grey/white circuit is for wiring to any qualified 0–10V controller for Tunable White CCT control.

Black (HOT)White (NEUTRAL)Green (GROUND)

Violet (DIMMING +)Pink (DIMMING -)

Violet/White (WHITE TUNE +)Grey/White (WHITE TUNE -)

Controller Manufacturer DataSpectraSync Tunable White was designed to be used with sinking style dimmers (provided by others) and is compatible with: • Hubbell Control Solutions (HCS): NX Distributed Intelligence™ Room Controllers (NXRC) and In-fixture Controllers (NXFM) • Lutron: DVTV, DVSTV, and NFTV dimmers • Wattstopper: ADF120277 and CD4BL (Titan) dimmers

SpectraSync™ Color Tuning Technology:Control your space based on the needs of the application, specific activities throughout the day and preferences of the occupants with distinct SpectraSync™ Color Tuning Technologies.

Shielding Lumen Output Watts

2700 3000 3500 4000 5000 6500

Lumens LPW Lumens LPW Lumens LPW Lumens LPW Lumens LPW Lumens LPW

Curve

XW 19 2240 118 2341 123 2383 125 2414 127 2493 131 2456 129VW 28 2990 107 3124 112 3180 114 3221 115 3327 119 3277 117MW 30 3218 107 3363 112 3424 114 3467 116 3582 119 3528 118LW 36 4084 113 4268 119 4345 121 4400 122 4545 126 4477 124ML 39 4566 117 4771 122 4857 125 4919 126 5081 130 5005 128HL 44 5209 118 5443 124 5541 126 5612 128 5797 132 5710 130

Rectangle

XW 20 2489 124 2601 130 2648 132 2682 134 2770 139 2728 136VW 28 3085 110 3224 115 3282 117 3324 119 3434 123 3382 121MW 30 3323 111 3472 116 3534 118 3580 119 3698 123 3642 121LW 36 4230 117 4420 123 4500 125 4557 127 4707 131 4637 129ML 39 4711 121 4923 126 5012 129 5076 130 5243 134 5164 132HL 43 5295 123 5533 129 5633 131 5705 133 5893 137 5804 135






Notes:

Type:

ATLPNW21-18584




DELIVERED LUMENS

DATE: LOCATION:

TYPE: PROJECT:

CATALOG #:

PRODUCT AVAILIBILITY 80 CRI

LUMEN PACKAGE SHIELDING LUMENS INPUT WATTS LPW

SLK24-30XW-EDU Curve 2341 19 123

SLK24-30XW-R-EDU Rectangle 2602 20 130

SLK24-30XWHE-EU Curve 2458 19 129

SLK24-30XWHE-R-EDU Rectangle 2555 20 128













SLK24-30VW-EU Curve 3124 28 112

SLK24-30VW-R-EDU Rectangle 3224 28 115

SLK24-30VWHE-EU Curve 3310 27 123

SLK24-30VWHE-R-EDU Rectangle 3279 26 126

SLK24-35VW-EU Curve 3217 28 115




SLK24-40VW-EU Curve 3267 28 117




SLK24-50VW-EU Curve 3558 28 127




SLK24-30MW-EU Curve 3363 30 112

SLK24-30MW-R-EDU Rectangle 3472 30 116

SLK24-30MWHE-EU Curve 3717 31 120

SLK24-30MWHE-R-EDU Rectangle 3660 29 126

SLK24-35MW-EU Curve 3464 30 115




SLK24-40MW-EU Curve 3518 30 117






SLK24-930XW-EDU Curve 2143 20 107


SLK24-935XW-EDU Curve 2188 20 109


SLK24-940XW-EDU Curve 2235 20 112


SLK24-950XW-EDU Curve 2381 20 119


SLK24-930VW-EDU Curve 2655 28 95






SLK24-950VW-EDU Curve 2936 28 105


SLK24-930MW-EDU Curve 2859 30 95


SLK24-935MW-EDU Curve 2926 30 98


SLK24-940MW-EDU Curve 2993 30 100







Notes:

Type:

ATLPNW21-18584




.625"(15.88mm)

3.125"(79mm)14.375"

(365mm)

22.5"(572mm)

minimum dimension at fixture opening

48"(1219mm)

45.8"(1163.6mm)

minimum inside dimension

46.8"(1189.6mm)

minimum inside dimension at fixture opening

DATE: LOCATION:

TYPE: PROJECT:

CATALOG #:

DIMENSIONS

2X4 MINIMUM DIMENSIONS FIT & FUNCTION

Columbia recommends a trial installation prior to ordering project quantities to ensure proper fit.

SLK retrofit kits are designed to fit into most parabolic and lensed-recessed troffers with minimum dimensional requirements.

SLK retrofit kits are not compatible with air handling units.



SLK24-50MW-EU Curve 3831 30 128




SLK24-30LW-EU Curve 4268 36 119

SLK24-30LW-R-EDU Rectangle 4420 36 123

SLK24-35LW-EU Curve 4396 36 122


SLK24-40LW-EU Curve 4465 36 124


SLK24-50LW-EU Curve 4861 36 135


SLK24-30ML-EU Curve 4771 39 122

SLK24-30ML-R-EDU Rectangle 4923 39 126

SLK24-35ML-EU Curve 4914 39 126


SLK24-40ML-EU Curve 4990 39 128


SLK24-50ML-EU Curve 5434 39 139


SLK24-30HL-EU Curve 5443 44 124

SLK24-30HL-R-EDU Rectangle 5533 43 129

SLK24-35HL-EU Curve 5606 44 127


SLK24-40HL-EU Curve 5694 44 129


SLK24-50HL-EU Curve 6200 44 141


DELIVERED LUMENS (CONTINUED)



SLK24-950MW-EDU Curve 3161 30 105


SLK24-930LW-EDU Curve 3628 36 101


SLK24-935LW-EDU Curve 3713 36 103


SLK24-940LW-EDU Curve 3799 36 106


SLK24-950LW-EDU Curve 4012 36 111


SLK24-930ML-EDU Curve 4055 39 104


SLK24-935ML-EDU Curve 4151 39 106


SLK24-940ML-EDU Curve 4246 39 109


SLK24-950ML-EDU Curve 4485 39 115


SLK24-930HL-EDU Curve 4812 43 112


SLK24-935HL-EDU Curve 4914 43 114


SLK24-940HL-EDU Curve 5019 43 117


SLK24-950HL-EDU Curve 5347 43 124







Notes:

Type:

ATLPNW21-18584




PHOTOMETRY PH

OTO

METRY

DATE: LOCATION:

TYPE: PROJECT:

CATALOG #:

IES

PD

F

SLK24-35VWG-EUPOLAR GRAPH ZONAL LUMEN SUMMARY

Zone Lumens % Luminaire0–30 804 25.00–40 1322 41.10–60 2372 73.70–90 3218 1000–180 3218 100

LUMINAIRE DATA

Test No. 17556

Description LED retrofit door kit, lensed troffer2'x4' with frosted linear prismed lens

Delivered Lumens 3218Watts 27.60Efficacy 117Mounting RecessedSpacing Criterion 0º = 1.22 90º = 1.32

Horiz 0-180

550

1100

0 15 30 45

90

75

60

0.0 45.0 90.0

IES

PD

F

SLK24-35LWG-EU POLAR GRAPH ZONAL LUMEN SUMMARY


LUMINAIRE DATA

Test No. 17568


Delivered Lumens 4396Watts 36.10Efficacy 122Mounting RecessedSpacing Criterion 0º = 1.22 90º = 1.32

Horiz 0-180

750

1500

0 15 30 45

90

75

60

0.0 45.0 90.0

IES

PD

F

SLK24-35HLG-EU

POLAR GRAPH ZONAL LUMEN SUMMARY


LUMINAIRE DATA

Test No. 17575


Delivered Lumens 5607Watts 44Efficacy 127Mounting RecessedSpacing Criterion 0º = 1.22 90º = 1.31

Horiz 0-180

950

1900

0 15 30 45

90

75

60

0.0 45.0 90.0

ADDITIONAL INFORMATION

All product and company names, logos and product identifiers are trademarks ™ or registered trademarks ® of Hubbell Lighting, Inc. or their respective owners. Use of them does not necessarily imply any affiliation with or endorsement by such respective owners.

DTS Integration G

uide

DTS WIRING DIAGRAM (0–10V DIMMING DRIVER SHOWN)

DRIVER

YELLOW (#5)

BLACK

WHITE

VIOLET

BLACKWHITE

BLUEWHITE / BLUE

VIOLETRED

ORANGE

SMALL YELLOW (CAP)

UTILITY POWER

EMERGENCYPOWER

TESTPINK

PINK

WHITE/BLUE Emergency NeutralBLUE Emergency LineBLACK Utility Line (Unswitched Hot)WHITE Utility NeutralRED Switched HotVIOLET DimmingPINK Dimming



of 2


TO:

PROJECT:
















2.01

Type: B

265113

X

N/A

N/A

N/A

Manufacturer

Columbia CVT4

Lithonia CSVT


of 2




By

Date

Remarks


Submitted by:

Signature: Title:

Firm:

Address:

Telephone: Date:



Austyn Parks



(503)-502-1738 11/10/2021





Catalog Number:CVT4-LS40

Notes:

Type:

BTLPNW21-18584


Page 1/3 Rev. 08/05/21COL-CVT-spec

FEATURES• Switchable Lumen technology: 7000/5800/4500 lumens

• 4000K

• 0–10V dimming to 10%

• IP65/66 rated

• Up to 160 lm/w

• 80 CRI

• -40°C to 40°C ambient

• Universal voltage (120–277V)

PH

OTO

METRY

SELL SH

EET

DIM

ENSIO

NAL D

RAWIN

GS

CVTLINEAR VAPORTITE

DATE: LOCATION:

TYPE: PROJECT:

CONSTRUCTION• Durable polycarbonate housing

• Polycarbonate latches allow for easy access to lumen switch

• Includes sealed conduit adaptor for ½" conduit

OPTICS• Ribbed frosted polycarbonate lens design

for optimal illumination and high impact durability

INSTALLATION• Surface mount or cable mount with provided

brackets (cable not included)

• Conduit entry with internal wiring access

• Refer to installation instructions for details

SPECIFICATIONSELECTRICAL• Long-life LEDs with a lifetime of L70 at

> 72,000 hrs

• 0–10V dimming to 10%

• Operates at 120–277V input

• Switchable Lumen technology allows for easy field-adjustable lighting output with three level switch located on gear tray

• Switchable Lumen fixtures ship at the highest lumen output

CATALOG #:

KEY DATA




Life (Hours) L70/72,000

CERTIFICATIONS• All luminaires are built to UL 1598 wet

location standards and have IP65/66 ratings, and bear appropriate cCSAus labels

• Adheres to LM79, LM80, and TM21 industry standards for photometrics and lifetime calculations

• DLC® (DesignLights Consortium) Premium Qualified. Please refer to the DLC website for specific product qualifications at www.designlights.org



ORDERING GUIDE

Catalog Number UPC Description Delivered

Lumens Watts LPW

CVT4-LS40 840141400242 4' Linear Vaportite, 7000/5800/4500 Switchable Lumens, 4000K

7297 48 1535893 38 1564620 29 159






Notes:

Type:

BTLPNW21-18584

CVTLINEAR VAPORTITE



DIMENSIONS

ADDITIONAL INFORMATION

49.86"(1266.5mm)

3.48"(88.4mm)

3.07"(78.0mm)

Switchable Lumen technologyThree level switch is located under the lens on the gear tray.

Included parts






Notes:

Type:

BTLPNW21-18584

CVTLINEAR VAPORTITE



PHOTOMETRY PH

OTO

METRY

CVT4-LS40 AT 7000LMINDOOR CANDELA PLOTZONAL LUMEN SUMMARY

Zone Lumens % Luminaire0–30 1644 22.30–40 2710 36.80–60 4922 66.80–90 6851 93.00–180 7367 100.0

LUMINAIRE DATA

Test No. CVT4-LS40_at_7000lmDescription CVT Linear VaportiteDelivered Lumens 7367Watts 47.64Efficacy 155Mounting SurfaceSpacing Criterion 0° = 1.31 90° = 1.24

Horiz 0-180

1100

2200

1100

2200

0 15 30 45

90

75

60

105

120

180 165 150 135

0.0 45.0 90.0

IES

PD

F



LUMINAIRE DATA


Horiz 0-180

850

1700

850

1700

0 15 30 45

90

75

60

105

120

180 165 150 135

0.0 45.0 90.0

IES

PD

F



LUMINAIRE DATA


Horiz 0-180

700

1400

700

1400

0 15 30 45

90

75

60

105

120

180 165 150 135

0.0 45.0 90.0

IES

PD

F



of 2


TO:

PROJECT:
















2.01

Type: CE

265113

X

N/A

N/A

N/A

Manufacturer

H.E. Williams (HEW) 6DR

Lithonia LDN6


of 2




By

Date

Remarks


Submitted by:

Signature: Title:

Firm:

Address:

Telephone: Date:



Austyn Parks



(503)-502-1738 11/10/2021





Catalog Number:6DR-TL-L15/840-EM/7W-DIM-UNV-TRIMNotes:

Type:

CETLPNW21-18584

ORDERING EXAMPLE: 6DR - TL - L20/835 - OPTIONS - DIM - UNV - OW - OF - CS - TRIM OPTIONS - N - F1 HOUSING TRIM MOUNT.

HOUSING SERIES LUMENS [ 1 ] CRI CCT OPTIONS CONTROL[ 2 ] VOLTAGE6DR - TLTrimLock

L10 1,000lm [ 3 ]

L15 1,500lmL20 2,000lmL30 3,000lmL40 4,000lmL50 5,000lmL60 6,000lmL70 7,000lmL80 8,000lm

8 809 90 [4 ]

27 2700K30 3000K35 3500K40 4000K50 5000K

SCA_ _ Sloped ceiling adapter [ 5 ]

ATH Airtight construction F Fuse

DIM Dimming driver, 0-10V

DIM1 1% Dimming driver, 0-10V

UNV 120-277V347 347V [6 ]

EM/7W 7-watt emergency battery [ 7 ]

EM/10W 10-watt emergency battery [ 8 ]

EM/10W/RTS 10-watt emergency battery with regressed test switch [ 9 ] CP Chicago plenum (CCEA) [ 1 0 ]

SDT Stepdown transformer [ 1 1 ]

TRIM [ 1 2 ]

TRIM TYPE DISTRIBUTION [ 1 3 ] FLANGE TYPE REFLECTOR FINISH TRIM OPTIONSO Open reflectorL Flush lensR Regressed lensA Angled lens [ 1 4 ]

S Non-conductive flush lens for shower applications [ 1 5 ]

W Wide 65° Open 55° Flush 55° RegressedM Medium [ 1 6 ] 35° Open 35° Flush 35° RegressedN Narrow [ 1 7 ] 10° Open 25° Flush 25° RegressedWW Wall wash [ 1 8 ]

OF 1/2″ standard flange

SF 1/4″ mud-in flange [ 1 9 ]

Open trim typesCS Clear semi-specular anodizeSG Satin-glow anodizeGD Gold anodizeCG Champagne gold anodizePW Pewter anodizeSPC Clear specular anodizeRG Rose gold anodize WH White texture powder coat BL Black texture powder coat

Lens trim types

MWT Textured white trim flange [ 2 0 ]

IP IP65 rated trim [ 2 1 ]

AD Diffuse acrylic lens [ 2 2 ]

PD Diffuse 1/8″ polycarbonate lens [ 2 3 ]

TD Diffuse polycarbonate lens media at top of open reflector [ 2 4 ]

WET/CC Wet location, covered ceiling listed [ 2 5 ]

AM Anti-microbial [ 2 6 ]

CS Clear semi-specular powder coatWH White texture powder coat BL Black texture powder coatMB Black texture splay with white flange [ 2 7 ]

MOUNTINGMOUNTING TYPE [ 2 8] MOUNTING HARDWARE [ 2 9] N Open pan for new constructionI IC-rated enclosure for new construction [ 3 0 ]

R Remodel kit [ 3 1 ]

F1 Integral 2-position fixed pan bracket, universal bar hanger included [ 3 2 ]

BA1 Adjustable butterfly pan bracket, bar hanger not included [ 3 3 ]

CA1 Adjustable caterpillar pan bracket, universal bar hanger included [ 3 4 ]

FEATURES

■ Innovative TrimLock reflector retention system ensures trim remains flush with ceiling plane

■ Available with LINKTair wireless fixture controls, by Williams

■ Available on QuickShip

SPECIFICATIONS ■ HOUSING – Die-cast aluminum trim

housing with forged aluminum heat sink. Galvanized steel splice compartment with driver mounting plate/enclosure. Swing-out mounting arms field adjust for ceiling thickness from 1/2″ – 2-1/4″.

■ TRIMLOCK – Innovative TrimLock reflector retention system ensures the trim remains flush with the ceiling plane.

■ OPEN REFLECTOR – Low-iridescent anodized aluminum. Clear semi-specular finish standard.

■ LENSED TRIM – Die-cast aluminum frame with micro-prismatic, acrylic lens.

■ ELECTRICAL – High-performance Class 2 C.O.B. LED array. Modular quick-connect plug for easy field-connection of LED light assembly to driver. Reported L70>55,000 hours. Reported L90>55,000 hours. Estimated L70 = 200,000 hours.

■ MOUNTING – Recessed. 20 ga. galvanized steel mounting pan for new construction or IC-rated enclosure. Remodel kit option includes receiver bracket hardware. Minimum 24″ O.C. marked spacing required for L60 - L80 lumen packages.

■ LISTINGS – ■ cCSAus conforms to UL STD 1598;

Certified to CAN/CSA STD C22.2 No. 250.0 for damp locations. LED light assembly conforms to UL 2108 for remote installation.

■ Suitable for wet location under covered ceiling when specified with WET/CC or TD options.

■ ENERGY STAR® certified in select configurations, see www.energystar.gov

■ IC-rated for direct contact with insulation when specified with I Mounting Type.

■ City of Chicago Environmental Air approved when specified with CP option.

■ Complies with ASTM-E283 when specified with ATH option.

■ RoHS compliant. ■ Title 24 (JA8) compliant in select

configurations, see www.cacertappliances.energy.ca.gov.

■ WARRANTY – 5-year limited warranty, see hew.com/warranty.

Available with BIOS® consult factory

NOTES1 Lumen output based on O trim type, W

distribution and CS finish, 3500K/80CRI. Actual lumens may vary +/-5%.See page 2 for FIXTURE PERFORMANCE DATA.

2 See page 3 for ADDITIONAL CONTROL OPTIONS.

3 Not available with EM/10W emergency batteries.

4 Extended lead times may apply. Consult factory for availability.

5 11-1/2″ aperture, specify degrees of slope in 5° increments, 05°-30°. See page 3 for SLOPED CEILING ADAPTOR DETAILS. Not available with ATH option. N Mounting Type only. Not available with WET/CC. Painted white. Other colors available, consult factory.

6 Not available with EM batteries or DMX controls.

7 N and R Mounting Types only. Not available with ATH or IP options.

8 N and R Mounting Types only. Not available with ATH or IP options.

9 Not available with WET/CC, ATH or IP options. N and R Mounting Types only. See page 5 for EM/10W/RTS DETAILS.

1 0 I Mounting Type required.1 1 May be required for 347V, see product

builder at hew.com/product-builder.1 2 Trim ships separately.1 3 Beam angle based on CS or WH reflector

finish. See page 2 for FIXTURE PERFORMANCE DATA.

1 4 Available with WW Distribution only.1 5 W Distribution, OF Flange Type and WH

Reflector Finish only. Standard with AD diffuse acrylic lens. IP and WET/CC options standard.

1 6 Not available with lumen stops L50 and higher when specified with flush or regressed trim types.

1 7 Not available with lumen stops L50 and higher when specified with flush or regressed trim types.

1 8 O and A Trim Types only.1 9 For use with mud-in plaster construction

only, supplied with mud flange installation kit. See page 4 for FLANGE TYPE DETAILS. Not available with ATH or IP options.

2 0 Not available with WH Reflector Finish, L or S Trim Types.

2 1 L and R trim types only.2 2 Not available with O trim type. W and WW

distributions only.2 3 Not available with O trim type. W and WW

distributions only.2 4 O Trim Type only. WET/CC standard. L50

lumen package max. 2 5 L50 lumen package max with O Trim Type.

Not available with PD trim option.2 6 WH and BL Reflector Finishes only. Not

available with S Trim Type.2 7 R Trim Type only. Not available with MWT.2 8 Mounting hardware required (N and I

only), ordered separately, see MOUNTING HARDWARE ordering info. See page 4 for MOUNTING TYPE DETAILS.

2 9 Additional mounting hardware options available. See page 5 for MOUNTING HARDWARE DETAILS.

3 0 L30 lumen package max.3 1 Also used in new construction sheetrock

ceilings.3 2 N and I Mounting Types only. I Mounting

requires external brackets.3 3 N Mounting Type only.3 4 N Mounting Type only.

NEW CONSTRUCTION AND REMODEL

CATALOG #: ��

TYPE: ��

PROJECT: ��ø6″ 1/2″ min2-1/4″ max

16-1/2″

L10 - L40: 6-5/8″L50 - L80: 7-3/8″

H.E. Williams, Inc. Carthage, Missouri www.hew.com 417-358-4065 Designed and Manufactured in the USAInformation contained herein is subject to change without notice.

Downlights Page 1 of 5HEW.70700.LA REV.10/14/21

6DR LED 6″ Downlight – Round






Type:

CETLPNW21-18584

FIXTURE PERFORMANCE DATA OPEN REFLECTOR TRIM TYPE

DIST. DELIVERED LUMENS WATTAGE EFFICACY (lm/W)

L10

W 1014 8.7 116.9M 982 8.7 113.2N 1003 8.7 115.7

L15

W 1497 13.8 108.6M 1495 13.8 108.4N 1528 13.8 110.8

L20 W 1988 19.0 104.6

M 1983 19.1 103.8N 2026 19.1 106.1

L30 W 3062 26.9 114.0

M 3003 26.9 111.8N 3000 26.9 111.7

L40 W 4094 36.5 112.2

M 4016 36.4 110.3N 4011 36.4 110.2

L50 W 5014 43.9 114.1

M 4935 43.9 112.3N 5047 43.9 114.9

L60 W 6043 54.0 111.9

M 5948 54.0 110.1N 6083 54.0 112.6

L70 W 7008 67.8 103.3

M 6898 67.8 101.7N 7055 67.8 104.0

L80 W 8018 79.8 100.5

M 7891 79.8 98.9N 8071 79.8 101.2

FLUSH LENS TRIM TYPEDIST. DELIVERED LUMENS WATTAGE EFFICACY (lm/W)

L10

W 774 8.7 89.2M 910 8.7 104.9N 909 8.7 104.8

L15

W 1178 13.8 85.4M 1385 13.8 100.4N 1384 13.8 100.4

L20 W 1562 19.5 80.1

M 1837 19.1 96.1N 1836 19.5 94.2

L30 W 2335 26.9 86.9

M 2782 26.9 103.6N 2718 26.9 101.2

L40 W 3122 36.5 85.5

M 3720 36.4 102.2N 3635 36.4 99.9

L50 W 3824 43.9 87.0

M – – –N – – –

L60 W 4609 54.0 85.4

M – – –N – – –

L70 W 5345 67.8 78.8

M – – –N – – –

L80 W 6115 79.8 76.7

M – – –N – – –

REGRESSED LENS TRIM TYPEDIST. DELIVERED LUMENS WATTAGE EFFICACY (lm/W)

L10

W 716 8.7 82.5M 883 8.7 101.7N 897 8.7 103.4

L15

W 1090 13.8 79.0M 1344 13.8 97.4N 1366 13.8 99.1

L20 W 1445 19.5 74.1

M 1782 19.1 93.3N 1812 19.5 92.9

L30 W 2160 26.9 80.4

M 2699 26.9 100.5N 2683 26.9 99.9

L40 W 2889 36.5 79.1

M 3609 36.4 99.1N 3587 36.4 98.6

L50 W 3537 43.9 80.5

M – – –N – – –

L60 W 4264 54.0 79.0

M – – –N – – –

L70 W 4945 67.8 72.9

M – – –N – – –

L80 W 5657 79.8 70.9

M – – –N – – –

MULTIPLIER TABLESCOLOR TEMPERATURE

CCT CONVERSION FACTOR

80 CR

I

2700K 0.923000K 0.983500K 1.004000K 1.015000K 1.02

90 CR

I

2700K 0.763000K 0.793500K 0.824000K 0.845000K 0.88

REFLECTOR FINISHCATALOG NUMBER

CONVERSION FACTOR

O TR

IM

CS 1.00SG 1 0.92GD 0.93CG 0.96PW 0.86SPC 1.02RG 0.88

WH 1 0.89BL 1 0.47

R TRI

M WH 1.00CS 0.98BL 0.79

TRIM

CATALOG NUMBER

CONVERSION FACTOR

S 0.85AD 0.85PD 0.85TD 0.75

WET/CC 2 0.85

1 Distribution will also be affected, consult factory.2 Use multiplier when specified with O Trim Type.

■ Photometrics tested in accordance with IESNA LM-79. Results shown are based on 25ºC ambient temperature.

■ Wattage shown is based on 120V input. ■ Results based on 3500K, 80 CRI, actual lumens may vary +/-5% ■ Use multiplier tables to calculate additional options.

PHOTOMETRY6DR-TL-L20/835-DIM-UNV-OW-OF-CS Report #: 20687; 12/12/18 | Total Luminaire Output: 1988 lumens; 19.0 Watts | Efficacy: 104.6 lm/W | 82.9 CRI; 3457K CCT

90°

0° 20°

40°

80°

60°

0°

CAND

LEPO

WER D

ISTRI

BUTIO

N

VERTICAL ANGLE HORIZONTAL ANGLE ZONAL LUMENS0º0 16725 1579 15115 1735 49225 1982 91735 604 38045 46 3655 13 1265 2 275 0 085 0 090 0

LUME

N SU

MMAR

Y

ZONE LUMENS % FIXTURE

0 - 40 1939 980 - 60 1987 1000 - 90 1988 1000 - 180 1988 100









Type:

CETLPNW21-18584

WIDE MEDIUM NARROW WALL WASH ANGLED WALL WASH

OPEN

65° 35° 10°

FLUS

H

55° 35° 25°

REGR

ESSE

D

55° 35° 25°

ADDITIONAL CONTROL OPTIONSLumen restrictions apply: L40 max for DMX driver, L40 max for Lutron drivers, L50 max for ELDO drivers, L15 minimum for DIM LINE driver, L60 max for DIM LINE driver. R Mounting Type not available with DMX controls. R Mounting Type requires 12″ minimum plenum depth when specified with VRF/DBI controls. 347V may require stepdown transformer, see product builder at hew.com/product-builder.

CATALOG NUMBER DESCRIPTIONDIM Dimming driver prewired for 0-10V low voltage applicationsDIM1 1% dimming driver prewired for 0-10V low voltage applicationsDIM LINE Line voltage dimming driver (TRIAC and ELV compatible at 120V only)DMX 0.1% dimming driver for DMX controlsLTE LINE Lutron Hi-lume 1% 2-wire dimming driver forward phase line voltage controls (120V only)LDE1 Lutron Hi-lume 1% EcoSystem dimming LED driverVRF/DBI/LDE1 Lutron Vive integral fi xture control, RF only (DFCSJ-OEM-RF), Lutron Hi-lume 1% EcoSystem dimming LED driver, and digital link interfaceFCJS/DIM Lutron Vive PowPak wireless fi xture control with dimming driverFCJS/DIM1 Lutron Vive PowPak wireless fi xture control with 1% dimming driverELDO SOLOB EldoLED Solodrive, 0.1% dimming driver for 0-10V controlsELDO SOLOB DALI EldoLED Solodrive, 0.1% dimming driver for DALI controlsELDO ECO1 EldoLED Ecodrive, 1% dimming driver for 0-10V controlsELDO ECO1 DALI EldoLED Ecodrive, 1% dimming driver for DALI controls

TRIMLOCK DETAILSTWIST PULL RELEASE

SLOPED CEILING ADAPTOR DETAILS

A

11-1/2″Ceiling cutout: ø11-7/8″

A (HEIGHT) PLENUM HEIGHTLUMENS 5° 10° 15° 20° 25° 30°

L10 - L40 10-11/16″ 10-7/8″ 10-15/16″ 10-7/8″ 10-13/16″ 10-5/8″ 11-1/4″L50 - L80 11-7/16″ 11-9/16″ 11-5/8″ 11-5/8″ 11-1/2″ 11-1/4″ 12″

15° Shown









Type:

CETLPNW21-18584

TRIM TYPE DETAILSOPEN OPEN (WALL WASH) FLUSH SHOWER ANGLED REGRESSED

ø6″ ø6″ ø5-5/8″ 1/8″ ø5-5/8″ 1/8″ ø5-5/8″ 1/8″ ø5-13/16″ 1/8″

1-1/2″

FLANGE TYPE DETAILS1/2″ STANDARD 1/4″ MUD-IN MUD FLANGE MOUNTING KIT (SLIM FLANGE TYPE)

ø7″Ceiling Cutout: ø6-1/2″

ø6-3/8″

Ceiling cutout: ø7″

1/2″1/8″

ø9-1/2″ø6-9/16″

REFLECTOR FINISH DETAILSSPC Clear specular

SG Satin-glow

PW Pewter

GD Gold

CG Champagne gold

RG Rose gold

CS Clear semi-specular

WH White

BL Black

MOUNTING TYPE DETAILSNEW CONSTRUCTION IC-RATED REMODEL

16-1/2″

13-1/2″

ø6-1/2″6-3/4″

5″

B

C

A

D

LENGTHLUMENS A B C D E F

L10 - L20 15-3/16″ 16″ 6-3/8″ 12-1/8″ 9-1/2″ 6-1/16″L30 16-5/8″ 17-1/2″ 7-7/8″ 14″ 10-1/4″ 7″

ø6.5″

E

F

Cross Section

ø6″

L10 - L40: 6-5/8″L50 - L60: 7-3/8″

Receiver Bracket

3-1/4″

2-3/4″

6-5/8″ 1-1/8″ minspace

Ceilingcutout

Driver and Junction Box

6-15/16″

4-1/8″

5-1/4″









Type:

CETLPNW21-18584

EM/10W/RTS DETAILS

Shown Installed

Test buttonfrom EM Driver

RTS trim nut

RTS trim washer

RTS trim

RTS TRIM CUTOUT (Outside pan boundary) Downlight cutout

MOUNTING HARDWARE DETAILS

F1 Integral 2-position fixed pan bracket, universal bar hanger included BA1 Adjustable butterfly pan bracket, bar hanger not included (N Mounting Type only)

CA1 Adjustable caterpillar pan bracket, universal bar hanger included (N Mounting Type only)

Mounts to t-bar or nailer bar

14″ minimum24″ maximum



14″ minimum24″ maximum Mounts to t-bar

or nailer bar

F1 with I Mounting Type

BA2 Adjustable butterfly pan bracket, heavy-duty universal bar hanger included (N Mounting Type only)

CA2 Adjustable caterpillar pan bracket, t-bar hanger included (N Mounting Type only)



Mounts to t-bar







of 2


TO:

PROJECT:
















2.01

Type: DE

265113

X

N/A

N/A

N/A

Manufacturer

Columbia CWM2

Lithonia FMVTSL


of 2




By

Date

Remarks


Submitted by:

Signature: Title:

Firm:

Address:

Telephone: Date:



Austyn Parks



(503)-502-1738 11/10/2021





Catalog Number:CWM2-30VWSM-FRFA-EDU-ELL14

Notes:

Type:

DETLPNW21-18584


Page 1/7 Rev. 10/04/21COL-CWM-spec

FEATURES• Simplistic modular design with interchangeable lenses and end caps

• Available in semi-recessed, flush mount and direct/indirect configurations

• Easy removal of lens allows access to electrical components for modular replaceability

• Luminaire installs in three easy steps without disassembling the fixture

• Slender profile meets ADA requirements for wall mounted product

• Wide lumen package offering for a variety of wall mount applications including stairwell, corridor, and vanity

• Best in class efficacy and reduced input wattage; excellent energy savings compared to legacy fluorescent products

PH

OTO

METRY

BRO

CHU

RE

DIM

ENSIO

NAL D

RAWIN

GS

N

X IN-FIXTU

RE SOLU

TION

GU

IDE

CWMCONTEMPORARY LED WALL MOUNT

DATE: LOCATION:

TYPE: PROJECT:

CONSTRUCTION• The luminaire chassis is designed from

anodized extruded aluminum

• End caps are injection molded or die cast for a finished appearance and provide smooth edges for ease of handling

• Fixture provides easy access to electrical components via removal of lens and chassis.

OPTICS• High efficiency acrylic lens features linear

prisms for high performance without glare or pixelation

• Optional 1/8" 3form material can be added as a decorative element or to match existing 3form features in various applications. For custom selections please consult factory

INSTALLATION• Semi-recessed or surface mounting options

• Semi-recessed mounting option requires the use of a 4-gang junction box for proper mounting and assembly

• A Snap-Tite conduit adapter is recommended for conduit installation to surface mount option


™



SPECIFICATIONSCONTROLS• Optional SpectraSync™ offers two modes

of Tunable White solutions and integrates seamlessly into a variety of control systems

• NX Distributed Intelligence™ provides options for standalone and networked integrated sensor with wired or wireless connectivity for NX system deployments

• NX is available in U.S., Canada and Mexico. For other locations consult factory

CERTIFICATIONS• Built to UL 1598 and 2108 standards and

bear appropriate cCSAus labels

• Damp Location labeling is standard

• Emergency equipped fixtures are listed to UL924 standards for emergency situations

• Adheres to LM79, LM80, and TM21 industry standards

• DLC® (DesignLights Consortium) Qualified - see www.designlights.org

KEY DATA




Reported Life (Hours) L80/60,000

CONTROL TECHNOLOGY

CATALOG #:

CWM with FR lens and FA end cap options

Surface Mount Cross Section (FR, SB, SF lenses)See additional dimensions on pages 5–6

49"(1244.6mm)

25"(635mm)

5.22"(132.6mm)

4"(101.6mm)

Front view, 4'

Cross section, both sizes

Front view, 2'

Surface Mount fixture on surface

SURFACE MOUNT BOX(PROVIDED WITH FIXTURE)

4" FROM WALL TOFRONT OF FIXTURE

4" SQUARE OR 4" OCTAGONJUNCTION BOX

DRIVER WITH FIXTURE

FLAT HEAD PHILIPS DRIVE SCREW

SURFACE WALL

CWM with DIS lens and FA end cap options






Notes:

Type:

DETLPNW21-18584




ORDERING GUIDE

CWM – –Model Size CRI Color Temp Delivered Lumens2 Mounting Lens

CWMContemporary LED Wall Mount

2 2'4 4'

Blank >80 30 3000K35 3500K40 4000K50 5000K2750T 2700K-5000K SpectraSync™

Tunable White1

2765T 2700K-6500K SpectraSync™ Tunable White1

XW 4' (2530)3

VW 2' (1664), 4' (3239)

MW 2' (2013), 4' (3633)

LW 2' (2439), 4' (4273)4

ML 2' (3310), 4' (4831)5

SM Surface Mount

SR Semi-Recessed

FR Frosted Rectilinear LensSB Slotted Lens with Bamboo InsertSF Slotted Lens with Fabric InsertDIS Direct/Indirect Straight Aluminum LensDISB Direct/Indirect Straight Aluminum Lens with Bamboo InsertDISF Direct/Indirect Straight Aluminum Lens with Fabric InsertDIC Direct/Indirect Curved Aluminum LensDICB Direct/Indirect Curved Aluminum Lens with Bamboo InsertDICF Direct/Indirect Curved Aluminum Lens with Fabric Insert

– U –End Caps Driver Voltage Options Control Options

FP Flat Plastic End Caps6

FA Flat Aluminum End Caps7

WA Aluminum End Caps with Glow Ends6

E Fixed OutputED 0-10V DimmingED1 0-10V 1% Dimming

U 120–277V ELL14 Emergency Battery Pack, 1400 Lumens8

GLR Fast Blow FuseLVC1 Low Voltage Controller for individual control of the reading

function9,10,11

LVC2__ Low Voltage Controller for individual or sequential control of two (2) independent functions. Use LVC Selection Chart included in this document to complete ordering code (Ex. LVC21, LVC22)9,10,11

LVCD__ Low voltage controller for up to three (3) functions with one (1) or two (2) functions having 0–10v dimming and the remaining function(s) being controlled independently. Use LVC Selection Chart on next page to complete ordering code (Ex. LVCDST5, LVCDSM4)9,10,11

P4L 4-Pole Pull Switch (mounted to the left as facing the luminaire)9,10,11

P4R 4-Pole Pull Switch (mounted to the right as facing the luminaire)9,10,11

NX Networked – WiredNXE NX, Dual SmartPorts12, 13, 14

Third-Party Control OptionsHFU High Frequency Ultra-sonic

Occupancy Sensor 12, 13,15

OW Occupancy Sensor, Wattstopper12,13,15,16,17

Example: CWM4–40MLSM–FRFP–EDUCATALOG #

DATE: LOCATION:

TYPE: PROJECT:

Accessories: Optional Integral Sensors

Cat# Suffix

Sensor Manufacturer Sensor Function Dim-To-Off

DaylightingPowerpack included in luminaire housing

OW Wattstopper Occupancy Sensor No Yes

HFU Wattstopper High Frequency Ultrasonic Occupancy

No Yes

Notes:1 Available with ED driver only, N/A with ELL14 (2') or SR (2'&4') options2 Based on the 4000K with FR lens. See CWM Performance Data Sheet for

extended lumen data3 XW only available with 4'4 LW with SR mounting not compatible with through wiring on 4' version5 ML not available with SR mounting option. ML Direct/Indirect only available in 2'6 Not available on Direct/Indirect7 Standard for Direct/Indirect8 Battery backup only available with SM mounting option

CATALOG #:

9 LVC and Pull Switch only available with Direct/Indirect lens option10 LVC and Pull Switch available in 120V only11 LVC and Pull Switch available in Surface Mount onlyNX In-Fixture Control Options:12 NX controls can only be used with NX Sensor options13 Not available with LVC or Pull Switch14 NX is available with ED and ED1 drivers onlyThird-Party Control Options:15 HFU and OW only available with SM mounting option16 Not recommended for stairwell applications17 Only available with ED driver






Notes:

Type:

DETLPNW21-18584




DATE: LOCATION:

TYPE: PROJECT:

CATALOG #:

ORDERING GUIDE (CONTINUED)

LVC SELECTION CHART

LVC ORDERING CODE

FUNCTION

AMBIENT(top compartment)

READING(bottom compartment)

LVC1 I

LVC21 I or S* I or S*

LVCDST4 ST I

LVCDST5 I ST

LVCDST6 ST ST

LVCDSM4 SM I

LVCDSM5 I SM

LVCDSM6 SM SM

The Low Voltage Controller (LVC) option allows control of the luminaire functions from a patient pillow switch, bed side rail or wall switch with normally-open momentary dry contacts. Depending on the number of modes to be controlled, various control options are available.

Independent I Dedicated On/Off control for a single load.

Sequential S On/Off Control of two loads by sequentially cycling through them

Step dim ST Stepped light levels in 25% increments with each toggle of the low voltage switch.

Smooth dim SM

Smooth increase in light level from a starting point of 25% by continuing to press the switch. When released, pressed and held again, the light level decreases until the switch is released.

*The selection of Individual (I) or sequential (S) control is determined by in-field connections at the control(s).






Notes:

Type:

DETLPNW21-18584




CONTROLS

DATE: LOCATION:

TYPE: PROJECT:

CATALOG #:

NX Distributed Intelligence™ Lighting Controls:Supports both indoor and outdoor applications in a variety of deployment options- wired, wireless, hybrid.Integrates with and enables a wide array of luminaires including those with SpectraSync Color Tuning Technology.

™

N

X Design & Application G

uide

NX Brochure

NX INTEGRATED CONTROLS REFERENCE

NX Option Sensor Networkable Scheduling Occupancy Daylight Harvesting

0–10V Dimming

On/off Control

Bluetooth® App Programming Commissioning

NX Networked – Wired

NXE N/A Yes Yes No No Yes Yes Requires a dongle 1 On-site

1 NXBTC/R needs to be plugged into an available SmartPort on the fixture network

SPECTRASYNC COLOR TUNING TECHNOLOGY

Mode Kelvin Range Description

Tunable White 2700K–5000K2700K–6500K

Offers users the ability to tailor CCT to their personal preference, enhancing task visibility, material and colors or the aesthetics of the space

Scheduled White 2700K-5000K2700K-6500K

Mimics the rhythm of natural light or follows an alternative user-defined schedule throughout the day, enhancing an occupant’s mood and well-being


SpectraSync

N

X Solutions Guide

SpectraSync™ Color Tuning Technology:Control your space based on the needs of the application, specific activities throughout the day and preferences of the occupants with distinct SpectraSync Color Tuning Technologies.

SpectraSync Tunable WhiteAvailable in two options: 2750T (2700K–5000K) or 2765T (2700K–6500K). Requires two 0–10V controllers, one for intensity and one for CCT. Minimum 5% dimming.

To enable scheduling and for use with NX wall control preset stations please refer to Hubbell Control Solutions NX SpectraSync technical sheet.

100%

Channel 1

Channel 2

Control Input (Vdc)

Out

put (

% o

f tot

al d

river

cur

rent

)

Color Tuning Pro�le

90%

80%

70%

60%

50%

40%

30%

20%

10%

0%0 1 2 3 4 5 6 7 8 9 10

SpectraSync Tunable White luminaires are provided with two 0–10V circuits. The violet and pink circuit is for wiring to any qualified 0–10V controller for dimming. The violet/white and grey/white circuit is for wiring to any qualified 0–10V controller for Tunable White CCT control.

Black (HOT)White (NEUTRAL)Green (GROUND)

Violet (DIMMING +)Pink (DIMMING -)

Violet/White (WHITE TUNE +)Grey/White (WHITE TUNE -)

Controller Manufacturer DataSpectraSync Tunable White was designed to be used with sinking style dimmers (provided by others) and is compatible with: • Hubbell Control Solutions (HCS): NX Distributed Intelligence™ Room Controllers (NXRC) and In-fixture Controllers (NXFM) • Lutron: DVTV, DVSTV, and NFTV dimmers • Wattstopper: ADF120277 and CD4BL (Titan) dimmers






Notes:

Type:

DETLPNW21-18584




DATE: LOCATION:

TYPE: PROJECT:

DIMENSIONS

CATALOG #:

SURFACE MOUNT — FR, SB, SF LENSES

SURFACE MOUNT — DIRECT/INDIRECT LENSES

48.17"(1223.5mm)

24.17"(609.6mm)

6.66"(169.2mm)

6.06"(153.9mm)

4"(101.6mm)

4"(101.6mm)

Front view, 4'

Cross section, both sizes, curved

Cross section, both sizes, straight

Front view, 2'





DRIVER WITH FIXTURE


SURFACE WALL

49"(1244.6mm)

25"(635mm)

5.22"(132.6mm)

4"(101.6mm)

Front view, 4'


Front view, 2'





DRIVER WITH FIXTURE


SURFACE WALL






Notes:

Type:

DETLPNW21-18584




DIMENSIONS, CONT'D

DATE: LOCATION:

TYPE: PROJECT:

CATALOG #:

SEMI-RECESSED — FR, SB, SF LENSES

SEMI-RECESSED — DIRECT/INDIRECT LENSES

48.17"(1223.5mm)

24.17"(609.6mm)

6.66"(169.2mm)

6.06"(153.9mm)

3.8"(96.5mm)

3.78"(96mm)

2.9"(73.7mm)

2.89"(73.4mm) Surface Mount fixture

on surface

Cross section, both sizes, curved Cross section, both sizes, straight

Front view, 4' Front view, 2'

2.95" FROM WALL TOFRONT OF FIXTURE

MOUNTING PLATE(PROVIDED WITH FIXTURE)

4-GANG JUNCTION BOX (72.9 CU. IN.)(EX: RACO 953)

4-GANG J-BOX COVER (20.3 CU. IN.)(EX: RACO 823)

DRIVER WITH FIXTURE


DRYWALL

25"(635mm)


Front view, 4' Front view, 2'


49"(1244.6mm)

5.22"(132.59mm)

3.75"(95.3mm)

3"(76.2mm)


MOUNTING PLATE(PROVIDED WITH FIXTURE)

4-GANG JUNCTION BOX (72.8 CU. IN.)(EX: RACO 953)

4-GANG J-BOX COVER (20.3 CU. IN.)(EX: RACO 823)

DRIVER FROM FIXTURE


DRYWALL






Notes:

Type:

DETLPNW21-18584




DATE: LOCATION:

TYPE: PROJECT:

CATALOG #:

PHOTOMETRY PH

OTO

METRY

IES

PD

F

CWM4-35LWXX-DIS-EDUPOLAR GRAPH ZONAL LUMEN SUMMARY

Zone Lumens % Luminaire0–30 755 17.80–40 1159 27.40–60 1785 42.20–90 2091 49.40–180 4233 100

LUMINAIRE DATA

Test No. 17817

DescriptionCWM Contemporary Wall Mount, Surface 4ft Direct-Indirect Wall Mount with Frosted Lens

Delivered Lumens 4233Watts 43.40Efficacy 98Mounting Wall MountSpacing Criterion 0º = N/A 90º = N/A

550

1100

550

1100

0 15 30 45

90

75

60

105

120

180 165 150 135165150135

105

120

90

75

60

153045

180.0-0.0 270.0-90.0

IES

PD

F

CWM4-35LWXX-FRYY-EDUPOLAR GRAPH ZONAL LUMEN SUMMARY


LUMINAIRE DATA

Test No. 16631

DescriptionCWM Contemporary Wall Mount, Surface 4ft Wall Mount withFrosted Lens


550

1100

550

1100

0 15 30 45

90

75

60

105

120

180 165 150 135165150135

105

120

90

75

60

153045

180.0-0.0 270.0-90.0

IES

PD

F

CWM4-35LWXX-DIC-EDU

POLAR GRAPH ZONAL LUMEN SUMMARY


LUMINAIRE DATA

Test No. 17841

DescriptionCWM Contemporary Wall Mount, Surface 4ft Direct-Indirect Wall Mount with Frosted Lens


500

1000

500

1000

0 15 30 45

90

75

60

105

120

180 165 150 135165150135

105

120

90

75

60

153045

180.0-0.0 270.0-90.0

All product and company names, logos and product identifiers are trademarks ™ or registered trademarks ® of Hubbell Lighting, Inc. or their respective owners. Use of them does not necessarily imply any affiliation with or endorsement by such respective owners.



Solicitation Number 2021-51 Invitation to Bid thfor NE 18 ...

Documents

Transcript of Solicitation Number 2021-51 Invitation to Bid thfor NE 18 ...