Soil cultivation
description
Transcript of Soil cultivation
Tel: 0048 12 2693114 Fax: 0048 12 2674454
Sales program
2009
[email protected] www.zagroda.pl
Soil cultivation . • Bed ploughs • Reversible ploughs • Cultivators • Pre-sowing cultivators • Short disc harrows • Disc harrows • Rollers
Bed plough
Type U-144 U-144/1 U-144/2 U-144/3
Ref. no. 8181 8182 8183 8184
No. of plough bodies 2 3 4 5
Working width of plough body /mm/ 250
Ploughing width /mm/ 500 750 1000 1250
Max transport speed /km/h/ 20
Min. tractor power demand /HP/ 21 32 44 54
Length /mm/ 1400 2050 2700 3350
Width /mm/ 1050 1050 1300 1500
Height /mm/ 1100
Frame height /mm/ 600
Plough bodies distance /mm/ 700
Weight /kg/ 190 240 300 360
Bed plough heavy version
Type U-160 U-160/2 U-160/4 U-160/6
Ref. no. 8186 8187 8188 8189
No. of plough bodies 2 3 4 5
Working width of plough body /mm/ 300
Ploughing width /mm/ 600 900 1200 1500
Min. tractor power demand /HP/ 24 38 52 65
Length /mm/ 1600 2300 3000 3700
Width /mm/ 1100 1150 1500 1800
Height /mm/ 1200 1200 1520 1800
Frame height /mm/ 650
Plough bodies distance /mm/ 770
Weight /kg/ 230 300 420 490
Bed plough with share protection
Type U-160/1 U-160/3 U-160/5 U-1607
Ref. no. 8191 8191H 8192 8192H 8193 8193H 8194 8194H
No. of plough bodies 2 3 4 5
Working width of plough body /mm/ 300
Ploughing width /mm/ 600 900 1200 1500
Min. tractor power demand /HP/ 24 38 52 65
Length /mm/ 1600
1700 (H)
2300
2600 (H)
3000 3700
Width /mm/ 1100 1250 1150 1300 1500 1800
Height /mm/ 1200 1300 1200 1300 1200 1300 1200 1300
Frame height /mm/ 650 750 650 750 650 750 650 750
Plough bodies distance /mm/ 770 900 770 900 770 770
Weight (with disc coulters) /kg/ 235 305 425 495
Reversible plough „KM 80”
Ref. No. 8171 8172 8173 No of plough bodies [pcs] 2+ 3+ 3+1 Working width of plough body [cm] 28-32-36-40 Plough bodies distance [cm] 85 Frame height [cm] 78 Min. tractor power demand [HP] 60 80 100 Weight [kg] 800 980 1160
Reversible plough „KM 180”
Ref. No. 8176 8177 8178 No of plough bodies [pcs] 3+ 4+ 4+1 Working width of plough body [cm] 36-40-44-48 Plough bodies distance [cm] 95 Frame height [cm] 82 Min. tractor power demand [HP] 105 145 180 Weight [kg] 1080 1280 1480
Cultivator • 3-bar frame, 2 rows of tines • Working elements Lemken system, • Regulation of tine angle • Skew alternate discs • Pipe roller Ø 540 mm (10 pipes) = R, • Shear protection and auto reset against stones • Frame height 80cm Extra charge: • Tandem roller = T: pipe roller Ø 540 mm (8 pipes) and string roller Ø 400 mm (40x10) • Edge discs • Small springs
Number Number Power demand Weight Ref. Working
width (m)
Folding of tines of discs (HP) (kg)
Protection Rollers no.
1,8 m no 4 3 50 670 Shear R 8300 2,2 m no 5 4 60 903 Shear R 8301 2,2 m no 5 4 60 1134 Auto-reset R 8302 2,6 m no 6 5 80 1045 Shear R 8303 2,6 m no 6 5 80 1265 Auto-reset R 8304 3,0 m no 7 6 100 1124 Shear R 8305 3,0 m no 7 6 100 1386 Auto-reset R 8306 3,8 m hydr. 9 8 140 1418 Shear R 8307 3,8 m hydr. 9 8 140 1785 Auto-reset R 8308 4,8 m hydr. 11 10 150 1890 Shear R 8309 4,8 m hydr. 11 10 150 2300 Auto-reset R 8310 5,6 m hydr. 13 12 170 2350 Shear R 8311 5,6 m hydr. 13 12 170 2950 Auto-reset R 8312 2,2 m no 5 4 80 1082 Shear T 8315 2,2 m no 5 4 80 1313 Auto-reset T 8316 2,6 m no 6 5 110 1229 Shear T 8317 2,6 m no 6 5 110 1449 Auto-reset T 8318 3,0 m no 7 6 130 1334 Shear T 8319 3,0 m no 7 6 130 1596 Auto-reset T 8320 3,8 m hydr. 9 8 150 1775 Shear T 8321 3,8 m hydr. 9 8 150 2142 Auto-reset T 8322 4,8 m hydr. 11 10 180 2284 Shear T 8323 4,8 m hydr. 11 10 180 2693 Auto-reset T 8324
Small springs
Edge discs
Stubble cultivator AJAX
„AJAX" - first ploughing aggregate designed for post harvest cultivation of soil with operating : widths
from 2.20 to 5.60 meters. The operating elements are drill coulters with pinions, embedded on 85 centimeters pillar, ensuring very high clearance under the frame, what prevents clogging by post harvest remainders. Behind two rows of teeth there is mounted the row of disks with 470 millimeters diameter. These disks are mounted on special spring dampers. Next, the soil is compacted and leveled by means of tubular roller (diameter 540 millimeters).
Standard equipment:
• Pipe roller ø 540 mm with a pointed width regulation • Buck raked discs ø 460 mm with a pointed regulation • Drawbar • 2 rows of tines • Safety device tine protection or spring protection (non-stop)
Working
width [m]
Type of protection
Number of tines (pcs)
Weight [kg]
Power demand [HP]
Ref. no.
Safety device 780 8331 2,2
Spring protection 5
990 70-80
8331a Safety device 860 8332
2,6 Spring protection
6 1100
90-100 8332a
Safety device 930 8333 3,0
Spring protection 7
1220 100-140
8333a Safety device 1720 8334
3,8 Spring protection
9 2090
140-170 8334a
Safety device 2000 8335 4,7
Spring protection 11
2450 170-200
8335a Safety device 2280 8336
5,6 Spring protection
13 2810
200-250 8336a
Heavy cultivator spiral • 3-beam construction of frame made of closed section • 3 rows of tines, • Working elements 35x35, universal (double-sided) shares assembled on double spring tine • Beam with wire scrapers Ø 12 mm • Pipe roller Ø 540 mm.
Working width (m)
Hydraulic folding
Number of tines
Wire scrapers
Power demand
(HP)
Weight (kg)
Ref. no.
2,0 - 9 8 60-80 640 8491 2,4 - 11 10 80-100 780 8492 2,8 - 13 12 100-140 840 8493 3,7 + 17 16 140-160 1215 8494 4,6 + 21 20 150-195 1360 8495
Pre-sowing cultivator „TORNADO”
Pre-sowing cultivator TORNADO is specially designed for soil scarifying, breaking and crushing the clumps and thickening the ground for better soaking of the earth water. The machine in the optimal way prepares every type of the ground for sowing by the row and point seeders. Two types of tines, which work angle in the soil is regulated in the soil by the special knobs. Pipe roller can be changed (please take a look at the pictures). There are three way of drags: slatted, slatted with tines and springed. Aggregate prepares the soil in a perfect way for sowing and vegetation plants.
Working width
Working depth (cm)
Distance between
rows (mm)
Distance between
tines (mm)
Frame height
Weight Power demand HP
Ref. No.
3,0 1950 90-100 8361 4,0 2100 120-140 8362 5,0 2250 140-160 8363 6,0
max 18
380
85
420
2400 160-180 8364
Optional configuration: from the front- drag, front frame of the cultivator, pipe roller, back frame of the cultivator, pressing rollers.
Standard configuration: From the front- slatted drag, front, pipe roller, front frame of the cultivator, back frame of the cultivator, pressing rollers..
Standard configuration: From the front-spring drag, pipe roller, front frame of the cultivator, back frame of the cultivator, pressing rollers
Regulation of the working depth
regulation of the slatted drag
Regulation of the tines angle work
Regulation of the lateral pressure rollers
Spiral tines double blade 35 x 35 mm
Stubble field grubber • Pipe roller Ø 540 • 2 rows of tines: goose foot 30x30 or heart form, double blade 35x35 • Spring drag • Rippers
Stubble field grubber with spiral tines, goose foot 30 x 30 mm
Stubble field grubber with spiral tines, doubl e blade 35 x 35 mm
Working width (m)
Hydraulic folding
Number of tines Power demand (HP)
Weight (kg)
Ref. no.
2,2 - 12 70-90 950 8350 3,0 - 16 90-120 1210 8351 3,8 + 18 120-140 1780 8352 4,7 + 24 140-160 2120 8353 5,6 + 29 160-200 2480 8354
Working width (m)
Hydraulic folding
Number of tines Power demand (HP)
Weight (kg)
Ref. no.
2,2 - 12 70-90 1050 8355 3,0 - 16 90-120 1340 8356 3,8 + 18 120-140 1950 8357 4,7 + 24 140-160 2320 8358 5,6 + 29 160-200 2710 8359
Spiral tines goose foot 30 x 30 mm
Large spring tined harrow
• 4 row of spring tines 45x12 • Pipe roller Ø 450
Working width (m)
Hydraulic folding
Number of tines
Power demand
(HP)
Weight (kg) Ref. no.
3,0 - 19 60-80 650 8481 4,0 + 25 80-100 1200 8482 5,0 + 32 100-120 1350 8483 6,0 + 37 120-140 1500 8484
Cultivator „GRYF”
Cultivator GRYF is specially designed for soil cultivation causing mixing of the soil, making the ground even and preparing the soil for the sowing. High clearance (540mm) under the aggregate frame prevents from blocking up the after harvest remnants. Aggregate may be equipped in tines type cultivator (45x12 mm) enforced or not enforced, and can be used to different types of soil. After scarifying, ground is thickened with 12 pipe roller diameter 540mm. Working width is regulated by the position changes of the pipe roller.
Working width (m)
Number of working elements (pcs)
Power demand (HP)
Weight (kg)
Working width (cm)
Ref. No.
4,0 26 105-115 1488 15 8486 5,0 32 130-140 1690 15 8487 6,0 38 160-170 1840 15 8488
Pre-sowing cultivator (folding 180 degree)
• Pipe roller • 4 rows of spring tines 32x10 • Tandem roller Ø 300 • Rippers
Working width (m)
Hydraulic folding
Power demand (HP)
Weight (kg)
Ref. no.
2,9 - 70-90 760 8442 3,7 + 80-100 1200 8443 4,3 + 100-120 1485 8444 5,0 + 120-140 1730 8445 5,7 + 150-170 1936 8446
WICHER Seed bed cultivator „WICHER" ("WHIRLWIND") - is a modern cultivation machine in operating widths from 2.50 to 5.70
meters. Operation of this aggregate can be divided into five stages:
1. Wheels traces scarifying (wheel ruts after tractor) by means of scarifiers with spring tension; 2. Crushing by means of nine string front rollers. Front and rear string rollers, embedded on bearing units
support the whole aggregate. 3. Soil scarifying - the heavy duty teeth cultivator type are responsible for this operation. They are finished
with so called "goose foot" at 180 mm width. 4. Fragmentation and alignment - the rear string roll plays the major role during this stage along with the
aligning bar, situated directly besides. The roller splits lumps and clods ensuring very good clotty structure.
5. Compacting - the pin roll at 370 mm diameter performs the secondary compacting and final preparation of the soil for seeding. Adjustment of depth is realized in the simple way by means of adjusting tie rod.
Standard equipment:
• Opener of the wheels traces with a point regulation of the width and a spring protection share point • String roller front and back ø 310 mm • 3 rows of string tines enforced with wide share point „ goose foot” • Regulated drag • Soil parking roller and crushing packer ø 370 mm • Cleaning comb •
Working width [m]
Type Weight[kg] Power
demand [HP]
Ref. No.
2,50 1380 80-110 8471 3,00
Rigid frame 1460 92-110 8472
Rigid frame 1890 120-140 8473a Hydraulic folding 2020 120-140 8473b 4,00
Rigid frame with wheeled chassis 2480 120-140 8473c Hydraulic folding 2130 145-155 8474a
4,50 Hydraulic folding with wheeled chassis 2720 145-155
8474b
5,30 2950 160-170 8475 5,70
Hydraulic folding with wheeled chassis 3030 170-180 8476
Pre-sowing cultivator with spring tines (folding 90 degree)
• Rippers for 4,90m and 5,6m • 4 rows of tines • Front string roller Ø 270 mm • 2 row string rollers
Tines to choose:
Working width (m)
Tines Hydraulic folding
Power demand
(HP)
Weigh (kg) Ref. no.
Cultivator tines - 68-80 660 8451A Coulter tines - 55-65 640 8451B Coulter tines
universal frame - 55-65 620 8451C
Spring tines - 55-65 610 8451
2,8
Spring tines Universal frame
- 55-65 630 8451D
Cultivator tines + 80-85 980 8452A Coulter tines + 80-85 950 8452B Spring tines + 80-85 960 8452
Cultivator tines permanent frame
+ 80-85 960 8452C
Coulter tines permanent frame
+ 80-85 930 8452D
3,3
Spring tines permanent frame
+ 80-85 940 8452E
Cultivator tines + 88-100 1010 8453A Coulter tines + 82-94 980 8453B
3,6
Spring tines + 82-94 990 8453 Cultivator tines + 102-120 1080 8454A Coulter tines + 95-110 1030 8454B
4,2
Spring tines + 95-110 1060 8454 Cultivator tines + 130-140 1450 8455A Coulter tines + 120-130 1390 8455B
4,9
Spring tines + 120-130 1430 8455 Cultivator tines + 150-160 1570 8456A Coulter tines + 136-150 1500 8456B
5,6
Spring tines + 136-150 1550 8456
• Coulter tine • Straight tine
• Spring tine • wy
• Cultivator tine
Short disc harrow • Pipe roller Ø 540 • Disc diam. 560mm
Short disc harrow KBTG 3,0
permanent Working width /m/ 3,00
Roller Pipe roller 540 Working depth / m/ 0,15
Number of discs /pcs/ 22 Disc diam. /mm/ 560
Between discs /m/ 0,25 Working speed /km/h/ 07-10
Capacity /ha/h/ 2,5 Power demand /HP/ 100-120
Weight (frame + chassis) /kg/ 1590+0=1590
Transport dimensions Length/Width /mm/ 2665/2990
Hydraulic folding -
Ref. no. 8436
Short disc harrow • Pipe roller Ø 540 • Disc diam. 510mm
Short disc harrow KBTT 3,0 Working width /m/ 3,00 Roller Pipe roller Working depth /cm/ 4-12 Number of discs /pcs/ 24 Discs diam. /mm/ 510 Width between discs /m/ 0,24 Working speed /km/h/ to 17 Power demand /HP/ 60 Weight /kg/ 1250 Transport dimensions Length/Width /mm/ 1700/3000 Hydraulic folding - Ref. no. 8431
Suspended harrow „TYGRYS”
Working width [m] 3,0 Disc diameter [mm] 455,560,610 No. of discs [pcs] 24 Weight cultivator + bolt shaft [kg] 1350 Tractor power demand [HP] 100 Weight per discs [kg] 52 Ref. No. 8440
Scraper in standard!
Disc harrow, trailed, discs rollers in X-system
Smale frame MR Heavy frame Type U226/6M
R U226/5M
R U226/4M
R U226/4 U226 U226/1 U226/2 U226/3 U226/7 Working width /m/ 2,8 3,2 3,6 3,6 4,2 4,6 5,2 5,6 6,1
Working depth /mm/ 250 250 250 250 250 250 250 250 250
Number of rollers 4 4 4 4 4 4 4 4 4 Number of discs front roller ø 660,710 7-7 8-8 9-9 9-9 10-10 11-11 12-12 13-13 14-14 Number of discs rear roller ø 660,710 6-6 7-7 8-8 8-8 9-9 10-10 11-11 12-12 13-13 Roller setting angles (front, rear) /degrees/ 0-25 0-25 0-25 0-25 0-25 0-25 0-25 0-25 0-25
Power demand /HP/ 100 120 140 160 180 200 220 240 260
Number of bearing 8 8 8 8 10 10 12 12 12
Weight per disc /kg/ 144 135 125 137 130 125 125 121 118
Weight kg/ 3000-5300
3300-5600
3500-5800
3900- 6200
4200-6600
4500- 6900
5000- 7500
5300-7800
5600-8200
Tyres 11,5/80-15,3 14,5/80-18 Ref.no. 8207 8208 8209 8201 8202 8203 8204 8205 8206
Extra charge
Pipe roller for trailed disc harrows, heavy, diameter. 530mm x 9 Pipes diameter. 33,7mm – extra charge
Pipe roller for trailed disc harrows, light, diameter 530mm x 9 Pipes diameter. 33,7mm – extra charge
Hydraulic for disc rollers for trailed disc harrows
Hydraulic for pipe roller for trailed disc harrows
Disc harrow, trailed or 3-point linkage, disc rolle rs in X-System
Extra charge Pipe roller for disc harrow, diameter. 530mm x 9 pipes diameter. 33,7mm – extra charge Chassis with thriller
3-point linkage trailed Type U324 U324/1 U324/2 U324C U324/1C U324/2C Working width /m/ 3,5 4,0 4,5 3,5 4,0 4,5 Working depth /mm/ 235 235 235 235 235 235 Number of rollers 4 4 4 4 4 4 Number of discs front roller ø 610 8-8 9-9 10-10 8-8 9-9 10-10 Number of discs rear roller ø 610 8-8 9-9 10-10 8-8 9-9 10-10 Power demand /HP/ 110 130 150 110 130 150 Number of bearing 8 12 12 8 12 12 Weight per disc /kg/ 83 79 76 83 79 76 Weight kg/ 1700 1800 1900 2170 2370 2570 Weight + pipe roller /kg/ 2180 2280 2380 2650 2850 3050 Tyres 10/75-15,3 Ref. no. 8211 8212 8213 8214 8215 8216
Disc harrow, 3-point linkage, X type
Working width: 3,40m possible
Extra charge: Pipe roller for disc harrow, Diam. 530mm x 9 pipes Diam. 33,7mm – extra charge Chassis with thriller
Type U323/1 U323 Working width /m/ 2,7 3,0 Working depth /mm/ 235 235 Number of rollers 4 4 Discs Ø 510 Ø 560 Ø 610 Ø 510 Ø 560 Ø 610 Number of discs front roller ø 610 (560, 510) 7-7 8-8 Number of discs rear roller ø 610 (560, 510) 6-6 7-7 Roller setting angles (front, rear) /degrees 0-25 0-25 Power demand /HP/ 70 80 Number of bearing 8 8 Weight per disc /kg/ 46 47 Weight kg/ 950 1150 Weight + pipe roller /kg/ 1210 1410 Ref. no. 8240 8240A 8240B 8241 8241A 8241B
Semi-mounted disc harrow X-type
Type U244 U244/1 U244/2 Working width /m/ 3,0 3,4 3,8 Working depth /mm/ 250 250 250 Number of rollers 4 4 4 Number of discs front roller ø 660 7-7 8-8 9-9 Number of discs rear roller ø 660 6-6 7-7 8-8 Roller setting angles (front, rear) /degrees 0-25 0-25 0-25 Power demand /HP/ 100 120 140 Number of bearing 8 8 8 Weight per disc /kg/ 88 82 78 Weight kg/ 2300 2450 2650 Ref. no. 8247 8248 8249
Disc harrow, 3-point linkage, disc rollers in V-Sys tem
Type U239/1 U239/2 U239/6 Working width /m/ 2,7 3,15 3,15 3,40 Working depth /mm/ 185 185 235 235 Number of rollers 4 4 4 4
Discs ø 510 ø 510 ø 560 (610)
ø 560 (610)
Number of discs front roller 6-6 7-7 7-7 8-8 Number of discs rear roller 6-6 7-7 7-7 8-8 Roller setting angles (front, rear) /degrees 0-22 0-22 0-22 0-22 Power demand /HP/ 60 65 75 85 Number of bearing 8 8 8 8 Weight per disc /kg/ 38 36 51 52 Weight kg/ 660 760 1170 1400 Weight + pipe roller /kg/ 920 1020 1430 1660 Ref.no. 8220 8221 8223 8224
Extra charge Discs diameter 610 mm for disc harrow U239/6 3,15 and 3,4 – extra charge Pipe roller for disc harrow U239/1,U239/2 und U239/6, diameter. 530mm - extra charge
Trailed disc harrow, discs rollers in V-System
Type U239/3 U239/4 U239 U239/5 U239/7 U239/8 Working width /m/ 1,4 1,6 1,8 2,0 2,2 2,4 Working depth /mm/ 185 185 185 185 185 185 Number of rollers 2 2 2 2 2 2 Number of discs front roller ø 510 6 7 8 9 10 11 Number of discs rear roller ø 510 6 7 8 9 10 11 Number of bearing 4 4 4 6 6 6 Power demand /HP/ 25 30 35 40 55 60 Width /mm/ 1600 1800 2000 2200 2400 2600 Length /mm/ 2000 2000 2000 2000 2000 2000 Height /mm/ 1100 1100 1100 1100 1100 1100 Weight / kg/ 330 380 390 470 485 520 Ref. no. 8230 8231 8232 8233 8234 8235
Trailed disc harrow, discs rollers in V-System
Type U208/1 U208/2 U208/3 U208/4 Working width /m/ 2,2 2,5 2,7 3,0 Working depth /mm/ 250 250 250 250 Number of rollers 2 2 2 2 Discs Ø 610 Ø 660 Ø 610 Ø 660 Ø 610 Ø 660 Ø 610 Ø 660 Number of discs front roller ø 660 10 11 12 13
Number of discs rear roller ø 660 10 11 12 13
Roller setting angles (front, rear) /degrees 0-25 0-25 0-25 0-25
Power demand /HP/ 75 90 115 120 Number of bearing 6 6 6 6 Weight per disc /kg/ 103 98 94 90 Weight kg/ 1800 1900 2000 2100 Weight + pipe roller /kg/ 2060 2160 2260 2360 Ref. no. 8243 8243A 8244 8244A 8245 8245A 8246 8246A
Rollers Cambridge – Universal roller • Universal roller with front and back 3-point linkage • Supports Extra charge: • Spring drag
Cambridge ø 450 mm
ø 500 mm
ø 530 mm
Working- width
No, of rings
Weight kg
Ref. no
No, of
rings Weight
kg Ref. no
No, of
rings Weight
kg Ref. no
3,0 m 53 910 9002 51 1040 9005 53 1180 9008
3,4 m 59 990 9003 57 1140 9006 59 1290 9009
4,0 m 73 1120 9390 71 1400 9391 73 1570 9392 Spring drag:
Ref. no. Spring drag for universal cambridge roller s
9411 Spring drag for universal cambridge rollers 3,0m 9412 Spring drag for universal cambridge rollers 3,4m 9413 Spring drag for universal cambridge rollers 4,0m
Cambridge - back • 3-point linkage • Support
Cambridge ø 450 mm
ø 500 mm
ø 530 mm
Working- width
No. of rings
Weight kg
Ref. no.
No. of rings
Weight kg
Ref. no.
No. of rings
Weight kg
Ref. no.
3,0 m 57 780 9371 55 890 9374 57 1090 9377
3,4 m 65 910 9372 63 1035 9375 65 1270 9378
Three gang Cambridge roller
• 3-point linkage • Manual folding
Working No of Weight Ref. no Roller type
width rings kg Cambridge
ø 450 mm 3 m 61 1040 9320
Cambridge
ø 500 mm 3 m 61 1230 9321
Cambridge
ø 530 mm 3 m 61 1360 9322
Cambridge roller hydraulic folding with 1 cylinder 4,0m – 9,0m
Cambridge ø 450 mm ø 500 mm ø 530 mm
Working- Number Weight Ref. no Number Weight
Ref. no Number Weight
Ref. no
width of tines kg of tines kg of tines kg 4 m 81 1770 9300 75 1940 9303 81 2200 9306 5 m 101 2060 9301 95 2270 9304 101 2570 9307
6,2 m 123 2340 9302 117 2630 9305 123 2960 9308 7,5 m 149 2670 9309 143 3030 9310 149 3420 9311 8,0 m 157 2770 9312 151 3180 9313 157 3580 9314 9,0 m - - - 167 3660 9361 177 4150 9362
Hydraulic unfolding while going forwards
Hydraulic folding while going backwards .
Cambridge roller with 3 cylinders 4,5m, 5,3m, 6,3m, 7,5m Extra charge: • Lights • Spring drag • Hydraulic brakes • Hand brakes • To specify by order: low or high hitch
Cambridge
ø 450 mm
ø 500 mm
ø 530 mm
Working width No of rings
Weight kg
Ref. no.
No of rings
Weight kg
Ref. no.
No of rings
Weight kg
Ref. no.
4,5 m 91 2040 9451 85 2230 9454 91 2500 9457 5,3 m 107 2240 9452 101 2480 9455 107 2780 9458 6,3 m 127 2490 9453 121 2790 9456 127 3130 9459 7,5 m - - - 145 3250 9461 131 3670 9462
Extra charge:
Lights
Hydr. brake
Hand brakes
Hydr. brake and hand brake
Hydr. Installation controlled from tractor Ref.no. Spring drag for Cambridge rollers
9420 Spring drag for cambridge rollers 4,5m 9421 Spring drag for cambridge rollers 5,3m 9422 Spring drag for cambridge rollers 6,3m 9423 Spring drag for cambridge rollers 7,5m
Hydraulic folding Cambridge roller 9m and 12m
• Lights • To specify by order: low or high hitch, hydraulic or pneumatic brakes
Cambridge ø 450 mm
ø 500 mm
ø 530 mm
Working width
No of sections
Weight kg
Ref. no.
No of sections
Weight kg
Ref. no.
No of sections
Weight kg
Ref. no.
9 m 5 4530 9468 5 5540 9470 5 5830 9472 12 m 5 5520 9469 5 6720 9471 5 7110 9473
Front mounted Campbell roller • Cleaning chains • Support • Rollers wider than 2m have additional bearings inside
Type of rings
ø 700 mm 30°, 31 kg
ø 700 mm 45°, 40 kg
ø 800 mm 30°, 47 kg
ø 900 mm 36°, 67 kg
Working width
No of
rings Weight
kg Ref no.
Weight kg
Ref no.
Weight kg
Ref no.
No of rings
Weight kg
Ref no.
3,0 m 20 1140 9015 1320 9019 1460 9250 15 1620 9023 3,4 m 22 1230 9016 1420 9020 1582 9251 18 1770 9024 4,0 m 26 1350 9325 1580 9326 1802 9327 21 1950 9328
Front cultivator mounted in front of Campbell rolle rs • Regulated working depth • Straight tines 32x10
Two-row Three-row Working
width No of tines
Weight kg
Ref. no
No of tines
Weight kg
Ref. no
3,0 m 19 142 9403 26 177 9407 3,4 m 21 154 9404 29 192 9408
Three gang Cambridge roller trailed
Working Wheel Weight Power Ref. Type of the roller
width quantity kg
demand (HP) No.
Cambridge ø 450 mm 4,5 m 93 1360 80 9315
Cambridge ø 500 mm 4,5 m 87 1590 80 9316
Cambridge ø 530 mm 4,5 m 93 1870 80 9317
Crosskill ø 510 mm 4,5 m 45 1330 80 9318
Three gang Cambridge roller (Crosskill)
Working Wheel Weight Power Ref. Type of the roller
width quantity kg
demand (HP) No.
Cambridge ø 450 mm 3 m 61 1040 60-70 9320
Cambridge ø 500 mm 3 m 61 1230 65-75 9321
Cambridge ø 530 mm 3 m 61 1360 70-80 9322
Crosskill ø 510 mm 3 m 31 1030 60-70 9323
-complet of shafts enables 4,5 m working width and transport one part of the roller
behind the other
Set: Campbell roller with shafts to the reversible plough + pin roller
ingle Campbell roller with a pin roller- set with shafts to
reversible ploughs
Wheels 700/30 700/45 800/30 900/36
width 500 500 500 550
1,6 m 9103 9112 9332 9121
1,8 m 9104 9113 9333 9122
2,0 m 9105 9114 9334 9123
2,4 m 9106 9115 9335 9124
2,6 m 9107 9116 9336 9125
3,0 m 9108 9117 9337 9126
3,4 m 9109 9118 9338 9127
Double Campbell rollers with a pin roller- set with shafts to reversible ploughs
Wheels 700/30 700/45 800/30 900/36
width 500 500 500 550
1,6 m 9182 9191 9341 9200
1,8 m 9183 9192 9342 9201
2,0 m 9184 9193 9343 9202
2,4 m 9185 9194 9344 9203
2,6 m 9186 9195 9345 9204
3,0 m 9187 9196 9346 9205
3,4 m 9188 9197 9347 9206
Double Campbell roller to the straight and reversib le ploughs
Standard equipment: - cleaning chains - 3 point linkage Optional equipment: - Chains trailed behind the roller - Shafts to the reversible plough
ø 700 mm ø 700 mm ø 800 mm ø 900 mm type of wheels
30°, 31 kg 45°, 42 kg 30°, 48 kg 36°, 71 kg
working wheels weight Ref. weight Ref. weight Ref. wheels weight Ref.
width quantity kg No. kg No. kg No. quantity kg No.
1,6 m 9/8 920 9067 1130 9076 1300 9263 7/6 1410 9085
1,8 m 10/9 1000 9068 1230 9077 1410 9264 8/7 1560 9086
2,0 m 11/10 1070 9069 1320 9078 1520 9265 9/8 1720 9087
2,4 m 13/12 1220 9070 1520 9079 1750 9266 11/10 2040 9088
2,6 m 14/13 1370 9071 1690 9080 1870 9267 12/11 2210 9089
3,0 m 16/15 1520 9072 1890 9081 2080 9268 13/12 2370 9090
3,4 m 18/17 1670 9073 2090 9082 2310 9269 15/14 2690 9091
Shafts to reversible ploughs
weight Ref. type of the roller
kg No.
700 1,6 m - 2,4 m 85 9240
700 2,6 m - 3,4 m 100 9241
800/900 1,6 m - 2,4 m 90 9242
800/900 2,6 m - 3,4 m 105 9243
Chains to bed ploughs
weight Ref. size of the roller
kg No.
1,6 m 12 9245
1,8 m - 2,4 m 15 9246
2,6 m - 3,4 m 22 9247
All rollers of the width over 2 m have additional bearing insid
Single Campbell roller to straight and reversible p loughs
shafts to reversibnle ploughs
roller type number
700 1,6 m - 2,4 m 9240
700 2,6 m - 3,4 m 9241
800/900 1,6 m - 2,4 m 9242
800/900 2,6 m - 3,4 m 9243
Chains to bed ploughs
size of the roller number
1,6 m 9245
1,8 m - 2,4 m 9246
2,6 m - 3,4 m 9247
ø 700 mm ø 700 mm ø 800 mm ø 900 mm
Wheels type 30°, 31 kg 45°, 42 kg 30°, 48 kg 36°, 71 kg
working wheels weight catalogue weight catalogue weight catalogue wheels weight catalogue
width quantity kg number kg number kg number quantity kg number
1,6 m 11 450 9031 540 9040 650 9254 9 760 9049
1,8 m 12 480 9032 580 9041 700 9255 10 830 9050
2,0 m 14 520 9033 630 9042 760 9256 11 900 9051
2,4 m 16 630 9034 820 9043 940 9257 13 1100 9052
2,6 m 17 720 9035 930 9044 1040 9258 14 1250 9053
3,0 m 20 840 9036 1040 9045 1210 9259 16 1440 9054
3,4 m 22 990 9037 1260 9046 1400 9260 18 1630 9055
Pin roller trailed behind the
Campbell rollers
pin ø 500 mm crosskill ø 510 mm
working wheels weight catalogue wheels weight catalogue
width quantity kg number quantity kg number
1,6 m 11 390 9222 9/9 460 9232
1,8 m 12 420 9223 10/9 510 9233
2,0 m 13 450 9224 11/10 570 9234
2,4 m 16 540 9225 13/12 670 9235
2,6 m 17 590 9226 15/11 730 9236
3,0 m 19 660 9227 17/11 820 9237
3,4 m 21 720 9228 19/13 920 9238
Standard equipment: - cleaning chains - 3 point linkage
Optional equipment: - chaines trailed behind the plough - shafts to the reversible plough
Campbell roller with a pin roller on the mutual fra me
Standard equipmen - 3 point linkage
- cleaning chains - chain trailed behind the plough
Campbell ø 700 mm Campbell ø 700 mm Campbell ø 800 mm
30°, 31 kg 45°, 42 kg 30°, 48 kg wheel type:
pin ø 500 mm pin ø 500 mm pin ø 500 mm
working wheels weight catalogue working wheels weight catalogue
width quantity kg number width quantity kg number
1,6 m 11+11 850 9142 980 9151 1050 9290
1,8 m 12+12 910 9143 1050 9152 1130 9291
2,0 m 13+13 980 9144 1130 9153 1220 9292
2,4 m 16+16 1150 9145 1340 9154 1460 9293
2,6 m 17+17 1290 9146 1490 9155 1630 9294
3,0 m 20+19 1460 9147 1700 9156 1920 9295
3,4 m 22+21 1600 9148 1860 9157 2070 9296
Campbell ø 900 mm
36°, 71 kg wheel type:
pin ø 500 mm
working wheels weight catalogue
width quantity kg number
1,6 m 9+11 1200 9160
1,8 m 10+12 1320 9161
2,0 m 11+13 1430 9162
2,4 m 13+16 1680 9163
2,6 m 14+17 1860 9164
3,0 m 16+19 2090 9165
3,4 m 18+21 2290 9166