SMART Board E70 interactive flat panel user's...
Transcript of SMART Board E70 interactive flat panel user's...
SMART Board® E70
SETUP AND MAINTENANCE GUIDEFOR MODEL SPNL-4070
smarttech.com/kb/170534
Product registration
If you register your SMART product, we’ll notify you of new features and software upgrades.
Register online at smarttech.com/registration.
Keep the following information available in case you need to contact SMART Support.
Serial number:
Date of purchase:
Licenses
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the UnitedStates and other countries
FCCwarning
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses andcan radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause harmful interference to radiocommunications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct theinterference at his own expense.
Trademark notice
SMART Board, SMART Notebook, smarttech, the SMART logo and all SMART taglines are trademarks or registered trademarks of SMART Technologies ULC inthe U.S. and/or other countries. Windows is either a registered trademark or a trademark of Microsoft Corporation in the U.S. and/or other countries. All otherthird-party product and company names may be trademarks of their respective owners.
Copyright notice
© 2013–2016 SMART Technologies ULC. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval systemor translated into any language in any form by any means without the prior written consent of SMART Technologies ULC. Information in this manual is subject tochange without notice and does not represent a commitment on the part of SMART.
This product and/or use thereof covered by one or more of the following U.S. patents.
www.smarttech.com/patents
10/2016
i smarttech.com/kb/170534
Important information
WARNING
l Failure to follow the installation instructions shipped with theSMART product could result in
personal injury and product damage which may not be covered by the warranty.
l Do not open or disassemble the SMART product. You risk electrical shock from the high
voltage inside the casing. Opening the casing also voids the warranty.
l Do not stand (or allow children to stand) on a chair to touch the surface of the SMART
product. Rather, mount the product at the appropriate height.
l To reduce the risk of fire or electric shock, do not expose the SMART product to rain or
moisture.
l If the SMART product requires replacement parts, make sure the service technician uses
replacement parts specified by SMART Technologies or parts with the same characteristics
as the original.
l Ensure that any cables that cross the floor to the SMART product are properly bundled and
marked to avoid a trip hazard.
l Use only extension cords and outlets that can fully accommodate this product’s polarized
plug.
l Use the power cable provided with this product. If a power cable is not supplied with this
product, please contact your supplier. Use only power cables that match the AC voltage of
the power outlet and that comply with your country’s safety standards.
l If the glass is broken, do not touch the liquid crystal. To prevent injury, handle glass
fragments with care when disposing of them.
l Use only VESA®-approved mounting hardware.
l Do not insert objects inside the cabinet ventilation holes, because they could touch
dangerous voltage points and cause electric shock, fire or product damage which may not
be covered by the warranty.
l Do not place any heavy objects on the power cable. Damage to the cable could cause
shock, fire or product damage which may not be covered by the warranty.
IMPORTANT INFORMATION
ii smarttech.com/kb/170534
l Disconnect all the interactive flat panel's power cables from the wall outlet and seek
assistance from qualified service personnel if any of the following occurs:
o The power cable or plug is damaged
o Liquid is spilled into the interactive flat panel
o Objects fall into the interactive flat panel
o The interactive flat panel is dropped
o Structural damage, such as cracking, occurs
o The interactive flat panel behaves unexpectedly when you follow operating
instructions
iii smarttech.com/kb/170534
Contents
Important information i
Chapter 1: About your interactive flat panel 1
Feature highlights 1Included accessories 2
Chapter 2: Mounting your interactive flat panel 3
Choosing a mounting location 4Choosing a mounting height 4Cable management 4Connecting your interactive flat panel 5Configuring your computer’s screen resolution 6
Chapter 3: Using your interactive flat panel 9
Using the remote control 9Using the control panel 12On-screen display menu 13Multi Media mode 14Cleaning the interactive flat panel 16
Chapter 4: Troubleshooting your interactive flat panel 19
Locating the serial number 19Resolving common touch control and resolution issues with Windows and Mac operating
systems 20Resolving image issues 22
Appendix A: Configuring and calibrating your SMART Board E70 interactive flat panel with
Windows 23
Configuring your touch and display settings for the SMART Board E70 23
Appendix B: Calibrating your interactive flat panel with Mac OS X 31
Calibrating your SMART Board E70 31
Appendix C: Hardware environmental compliance 33
Waste Electrical and Electronic Equipment and Battery regulations (WEEE and
Battery Directives) 33Batteries 33More information 33
Index 35
Chapter 1
1 smarttech.com/kb/170534
Chapter 1: About your interactive flat panel
Feature highlights 1Included accessories 2
Pen and pen tray 2Remote control 2Included cables 2
This chapter describes the features of your SMART Board® E70 interactive flat panel and provides
information about product parts and accessories.
Feature highlightsDesigned specifically for classrooms, the
SMART Board E70 interactive flat panel combines a
premium touch experience with the power of
SMART Notebook® collaborative learning software
on a 70" display.
The high-definition, shadow-free 70" (177.8 cm) LED
display features low friction coated glass that
enables fingers to glide smoothly over the surface,
facilitating a natural touch experience. The interactive
flat panel also virtually eliminates glare and provides
an optimal view from any angle in the classroom,
delivering an unparalleled viewing and writing
experience to offer the best value for classrooms.
The multitouch interactive flat panel features freestyle multi-user interaction anywhere on the
display with Windows® 7 or Windows 8 operating systems, enabling students to collaborate
without limitations.
CHAPTER1ABOUT YOUR INTERACTIVE FLAT PANEL
2 smarttech.com/kb/170534
Included accessoriesThe following accessories are included with your interactive flat panel:
Pen and pen trayTwo pens are included with your interactive flat panel.
Remote controlThe remote control enables you to access the on-screen menus and to change the display and
input settings.
Included cablesVGA - RGB video input
Power cable - AU/NZ, NA, UK and EU
USB cable - touch interface
Chapter 2
3 smarttech.com/kb/170534
Chapter 2: Mounting your interactive flat panel
Choosing a mounting location 4Choosing a mounting height 4Cable management 4Connecting your interactive flat panel 5Configuring your computer’s screen resolution 6
Recommended computer screen resolution 6Windows 7 and Windows 8 operating systems 7Mac OS X operating system software 8
WARNING
The weight of the interactive flat panel is 169.8 lb. (77 kg), refer to your local building code to
ensure the wall and the mount being used can support this installation. Use appropriating
hardware in accordance to building code and always use 3 or more people to lift and install E70
interactive flat panel.
l
Model Weight (lb.) Weight (kg)
SPNL-4055 116 lb 13 oz 53 kg
SPNL-4065 153 lb 69.4 kg
l
Model Mounting plate
SPNL-4055 600 mm × 400 mm
SPNL-4065 600 mm × 400 mm
l
Model Screw length Fasten force
SPNL-
4055
25 mm where the total wall mount bracket and washer
thickness is less than 7 mm.
97.36–177.01 in-lb.
(11–20 N·m)
SPNL-
4065
30 mm where the total wall mount bracket and washer
thickness is less than 7 mm.
97.36–177.01 in-lb.
(11–20 N·m)
CHAPTER2MOUNTING YOUR INTERACTIVE FLAT PANEL
4 smarttech.com/kb/170534
Choosing a mounting locationConsider the following when you select a location for the interactive flat panel:
l The wall must be strong enough to support the interactive flat panel and the mounting
equipment. The interactive flat panel weighs 169.8 lb. (77 kg).
l Select a wall with a flat, regular surface and sufficient clearance to accommodate your
interactive flat panel. Mount the interactive flat panel in a location that’s central to your
audience’s viewing direction.l Choose a location for the interactive flat panel that’s far from bright light sources, such as
windows and strong overhead lighting. IR lighting can cause issues with the performance of
the cameras and can lead to unintentional or missed touches.
For mobile or adjustable installation options, contact your authorized SMART reseller
(smarttech.com/where).
Choosing a mounting heightConsider the general height of the user community when you choose the height for the interactive
flat panel.
The flat panel height is based on the midpoint between the reach of the students and the teacher.
Cable managementWhen you connect cables to the interactive flat panel from a computer and other peripheral
devices, ensure that the cables aren’t a trip hazard. Use channels and raceways to safely secure
and hide cables. Contact your authorized SMART reseller for these accessories.
CHAPTER2MOUNTING YOUR INTERACTIVE FLAT PANEL
5 smarttech.com/kb/170534
IMPORTANT
Do not connect the power cable to a power outlet until you have connected all cables to the
interactive flat panel.
Connecting your interactive flat panelThe connector panel is at the bottom of the interactive flat panel.
NOTE
The power, PC-RGB (VGA) and USB cable are included with your interactive flat panel.
No. Connector Details
1 AC power AC power pass-through
2 USB B receptacle Computer to interactive flat
panel touch interface
CHAPTER2MOUNTING YOUR INTERACTIVE FLAT PANEL
6 smarttech.com/kb/170534
No. Connector Details
3 Video in Component video receptacle
4 Service port WARNING
Do not use this connector.This service connector forthe interactive flat panelmust be used only by aqualified technician.
5 USB A Media port (see Multi media
mode)
6 Video in Composite video receptacle
7 Video in PC-RGB (VGA)
IMPORTANT
If you see flickering or the display is not sized correctlypressing the Auto button will help with the adjustmentprocess. Ensure that you check and change E70 display torecommended resolution for best performance.
8 Audio in Stereo 3.5 mm connector (from
computer)
9 Video in HDMI®
Configuring your computer’s screen resolutionWhen you connect a computer to the interactive flat panel, you may have to adjust the computer’s
screen resolution to achieve the best image quality and touch performance.
Recommended computer screen resolution
NOTE
SMART recommends using 1920 × 1080 or 1280 × 720 screen resolutions for best image quality
and touch performance.
CHAPTER2MOUNTING YOUR INTERACTIVE FLAT PANEL
7 smarttech.com/kb/170534
The table below lists the recommended computer screen resolutions for your interactive flat
panel:
1920 × 1080 * 1280 × 768
1600 × 1200 1280 × 720 *
1280 × 1024 1024 × 768
1360 × 768 800 × 600
1280 × 960 640 × 480
The resolutions marked with an asterisk (*) are recommended for best image quality and touch
performance.
Windows 7 and Windows 8 operating systems
To configure your computer’s screen resolution
NOTE
This procedure varies depending on your version of the Windows operating system and your
system preferences.
1. Right-click the desktop and then select Screen Resolution.
2. Click Display > SMART E70.
From the Display drop-down menu, select your interactive flat panel.
3. From the Resolution drop-down menu, select a screen resolution. See Recommended
computer screen resolution on the previous page for more information.
4. Click OK.
The computer applies the new screen resolution. See Configuring and calibrating your
SMART Board E70 interactive flat panel with Windows for setup and extended display
settings.
CHAPTER2MOUNTING YOUR INTERACTIVE FLAT PANEL
8 smarttech.com/kb/170534
Mac OS X operating system software
To configure your Mac computer’s screen resolution
1. Select the Apple ( ) menu > System Preferences.
The System Preferences dialog box appears.
2. Click Displays.
3. Select a screen resolution from the list. Refer to Recommended computer screen resolution
on page 6 for more information.
The computer applies the new screen resolution. See Calibrating your SMART Board E70
interactive flat panel with Mac OS X for setup and extended display settings.
Chapter 3
9 smarttech.com/kb/170534
Chapter 3: Using your interactive flat panel
Using the remote control 9Using the control panel 12On-screen display menu 13
Picture settings 13Audio settings 13Setup settings 14Time settings 14
Multi Media mode 14Compatible file formats 15
Video 15Audio 15Images 15
Cleaning the interactive flat panel 16Preventing condensation 16
This chapter describes the basic operation and setup of your interactive flat panel.
Using the remote controlUse the remote control to access on-screen menus and to change the interactive flat panel’s
settings.
CHAPTER3USING YOUR INTERACTIVE FLAT PANEL
10 smarttech.com/kb/170534
No. Button Details
1 PC Selects the VGA input
2 HDMI Select the HDMI input
3 [Number buttons] Press buttons on the number pad to change channels
4 VOL +/- Increase or decrease the audio output level
5 [Up and down buttons] Select a menu option in the on-screen display menu
6 MENU Display the on-screen display menu
CHAPTER3USING YOUR INTERACTIVE FLAT PANEL
11 smarttech.com/kb/170534
No. Button Details
7 [Left and right buttons] l Select an option in the on-screen display menul Use the right button to increase a valuel Use the left button to decrease a value
8 INFO Display the current video source
9 STILL Turn still picture mode on or off
10 AUTO Automatically adjusts the VGA video input
IMPORTANT
This automatically adjusts the image to match thesettings the display adapter is sending. In most cases,this will solve touch issues. You can adjust the displaysettings of the interactive flat panel if needed.
11 [Media buttons] For use in Multi Media mode
12 S.MODE Switch between stereo and mono sound
13 P.MODE Switch between color modes
14 EXIT Close the on-screen display menu
15 INPUT Switch video inputs
16 MUTE Mute the sound
17 CH +/- Change channels
18 P.SIZE Select the video aspect ratio
19 SLEEP Set the sleep timer
20 VIDEO Select the RCA input
21 Power Turns the interactive flat panel on or off
22 Multi Media button Display the Multi Media mode
CHAPTER3USING YOUR INTERACTIVE FLAT PANEL
12 smarttech.com/kb/170534
Using the control panelUse the control panel on your interactive flat panel to access the on-screen display menu and
adjust settings.
No. Button Details
1 Power Turn the interactive flat panel on or turn off
2 UP Move the highlighted area up to select items in the on-
screen display menu
3 DOWN Move the highlighted area down to select items in the
on-screen display menu
4 VOL + Move the highlighted area left to select items in the on-
screen display menu, increase the audio output level or
increase a value
5 VOL - Move the highlighted area right to select items in the on-
screen display menu, decrease the audio output level or
decrease a value
6 MENU Display the on-screen display menu
7 INPUT Select a video input for the interactive flat panel
CHAPTER3USING YOUR INTERACTIVE FLAT PANEL
13 smarttech.com/kb/170534
On-screen display menuYou can access the on-screen display (OSD) menu by pressing MENU on the side panel of your
interactive flat panel or on the remote control. To exit the OSD menu, press MENU on the
interactive flat panel's side panel, or press EXIT on the remote control.
Picture settingsOption Value Function
Picture
Mode
Custom
Standard
Mild
Vivid
Sets the picture mode
Brightness 0-100 Sets the overall brightness of the image and background
Contrast 0-100 Sets the brightness of the image in relation to the background
Tint 0-100 Sets the tint of the screen
Color 0-100 Sets the image color intensity
Color Temp Normal
Warm
Cold
Sets the color temperature
Audio settingsOption Value Function
Surround [N/A] Turns the surround sound on or off
Sound Mode Music
Standard
User
News
Movie
Sets the audio mode
Auto
Volume
[N/A] Turns the automatic volume adjustment on or off
CHAPTER3USING YOUR INTERACTIVE FLAT PANEL
14 smarttech.com/kb/170534
Setup settingsOption Value Function
Menu
Language
[Languages] Sets the on-screen display menu’s language
Menu Trans. [N/A] Sets the on-screen display menu’s transparency
Screen
Mode
16:9
4:3
Zoom1
Zoom2
Sets the image size
Reset [N/A] Resets all Setup options
Software
Update
[N/A] NOTE
Software updates should be performed only by a systemadministrator. Please contact your authorized SMART reseller ifyou require further assistance.
Time settingsOption Value Function
Time mode Automatic
ManualSets the time mode
Time [N/A] Sets the time manually
Sleep Time [N/A] Sets the sleep timer
On Timer [N/A] Turns on the On Time function
On Time [N/A] Sets a time when the interactive flat panel turns on
Volume 0-100 Sets the volume when the interactive flat panel turns on
Off Timer [N/A] Turns on the Off Time function
Off Time [N/A] Sets a time when the interactive flat panel turns off
Multi Media modeYou can play video files, view images and listen to music stored on a USB drive. Use the remote
control to pause, fast-forward and rewind videos.
CHAPTER3USING YOUR INTERACTIVE FLAT PANEL
15 smarttech.com/kb/170534
Compatible file formatsThe interactive flat panel can play the following file types.
Video
Category Code
MPEG1 MPEG1
MPEG2 MPEG2
MPEG4 AVC
MPEG-4 Visual
DivX5
DivX4
DivX3
XviD
MS-MEG4 V3
WMV3
MJPEG M-JPEG
Audiol AC-3l AACl MP3l PCM
Imagesl JPEGl BMPl PNGl GIFl TIFF
To access content on a USB drive
1. Turn on the interactive flat panel.
2. On the remote control, press the Multi Media button.
CHAPTER3USING YOUR INTERACTIVE FLAT PANEL
16 smarttech.com/kb/170534
3. Connect a USB drive to the USB A receptacle on the bottom connector panel. See
Connecting your interactive flat panel on page 5.
4. Using the remote control, select a file.
5. Press the Play button on the remote control to play or view the file.
Cleaning the interactive flat panelFollow these instructions to clean the interactive flat panel without damaging its anti-glare coating
or other product components.
CAUTION
l Do not use permanent or dry-erase markers on the screen. If dry-erase markers are used on
the screen, remove the ink as soon as possible with a lint-free, non-abrasive cloth.
l Do not rub the screen with a dense or rough material.
l Do not apply pressure to the screen.
l Do not use cleaning solution or glass cleaner on the interactive flat panel screen, because
they can deteriorate or discolor the screen.
To clean the screen
1. Press the power button to turn off the display.
2. Wipe the screen with a lint-free, non-abrasive cloth.
Preventing condensationThe interactive flat panel screen contains layers of glass that can collect condensation, especially
in the following conditions:
l Temperature extremes with high humidity
l Rapid changes in humidity, which can occur when you operate the product near water (such as
a pool, kettle or air conditioner ventilator)
l Direct exposure to sunlight
l Cold air output from an air conditioner towards the bottom of the interactive flat panel.
CHAPTER3USING YOUR INTERACTIVE FLAT PANEL
17 smarttech.com/kb/170534
To evaporate condensation from the interactive flat panel
1. Remove the humidity source from the interactive flat panel, if possible.
2. Turn off the interactive flat panel.
3. Remove any moisture from the interactive flat panel with a smooth, dry cloth.
4. Leave the interactive flat panel turned off for 48 hours.
Chapter 4
19 smarttech.com/kb/170534
Chapter 4: Troubleshooting your interactive flatpanel
Locating the serial number 19Resolving common touch control and resolution issues with Windows and Mac operating
systems 20Resolving image issues 22
This chapter provides information necessary for solveing simple issues that occur with your
interactive flat panel. If issues persist, or aren’t covered in this chapter, contact SMART Support
(smarttech.com/support) or your authorized SMART reseller (smarttech.com/where).
Locating the serial numberIf you contact SMART Support, you might be asked to provide the interactive flat panel’s serial
number. The serial number is located under the front right bezel.
CHAPTER4TROUBLESHOOTING YOUR INTERACTIVE FLAT PANEL
20 smarttech.com/kb/170534
Resolving common touch control and resolutionissues with Windows and Mac operating systemsProblem Cause Solution
Resolution and/or touchinaccuracies
NOTE
The recommendedresolutions for theSMART E70 interactive flatpanel are:
l 1920 × 1080 andl 1280 × 720
See Recommendedcomputer screen resolutionin this guide for moreinformation and settings.
The display's resolution is notset to the recommendedsetting.
Press the Autobutton on
the remote control. This adjuststhe image to match the settingsthe display adapter is sending.In most cases this will help orsolve touch issues. You canmanually adjust display settingsif needed. See Configuringyour computer’s screenresolution.
The interactive flat paneldoesn’t turn on.
The interactive flat panel isn’tconnected to a power source.
Connect your interactive flatpanel to a power outlet.
The interactive flat panel is inSleep mode.
Press the Power button on themenu control panel or on theremote control.
CHAPTER4TROUBLESHOOTING YOUR INTERACTIVE FLAT PANEL
21 smarttech.com/kb/170534
Problem Cause Solution
Touch isn't working asexpected.
The USB cable between thecomputer and the interactiveflat panel could be loose.
Check all cable connections.
The interactive flat panel mayneed to be turned off and thenturned on.
Turn the interactive flat paneloff and then turn it on.
Bright lights are interfering withthe interactive flat panel.
Close blinds or shades or dimall halogen lights and LEDs.
Your interactive flat panel isn'tcalibrated properly.
Your interactive flat panel mayneed to be re-calibrated.
IMPORTANT
The interactive flat panels arepre-calibrated and orientedat the factory. Calibrationshould be performed only byan administrator.
Pen and touch setting may notbe selected.
1. For Windows operatingsystems, open Control Panel >Pen and Touch.
2. Select the Touch tab.
3. Ensure that the followingoptions are selected:Use yourfinger as an input device andEnablemulti-touch gesturesand inking.
4. Click Apply and/orOK.
The required drivers forWindows operating systemwere not installed.
Ensure that Windowsautomatically installed therequired device drivers. Theinteractive flat panel and AFOTCM10X-700 HID should belisted under Windows Devicesand Printers.
CHAPTER4TROUBLESHOOTING YOUR INTERACTIVE FLAT PANEL
22 smarttech.com/kb/170534
Resolving image issuesProblem Causes Solution
When the video source isHDMI, the image and audio arelow quality.
The cable between the HDMIsource and the interactive flatpanel could be loose.
Check all cable connections.
The HDMI cable could be toolong.
Ensure that the length of HDMIcable doesn’t exceed 23' (7 m).
The image is poor qualityand/or doesn’t fit on thescreen.
The computer's screenresolution is incorrect.
See Configuring yourcomputer’s screen resolutionon page 6 to select the correctscreen resolution.
Appendix A
23 smarttech.com/kb/170534
Appendix A: Configuring and calibrating yourSMART Board E70 interactive flatpanel with Windows
If your SMART Board E70 interactive flat panel has an inaccurate touch or the touch is not working,
you may need to configure or calibrate it. Follow the instructions below to configure and calibrate
your SMART Board E70 interactive flat panel.
IMPORTANT
The SMART Board E70 interactive flat panel is factory calibrated. We recommend that you
resolve touch inaccuracy through configuration prior to calibration.
Configuring your touch and display settings forthe SMART Board E70
If touch is inaccurate:l See the list below for supported resolutions for your SMART Board E70 interactive flat panel:
1920 × 1080 * 1280 × 768
1600 × 1200 1280 × 720 *
1280 × 1024 1024 × 768
1360 × 768 800 × 600
1280 × 960 640 × 480
The resolutions marked with an asterisk (*) are recommended.
NOTE
There should be no black bar bars on the top bottom or on either side of the image, the
image should completely fill the screen.
APPENDIX ACONFIGURING AND CALIBRATING YOUR SMART BOARD E70 INTERACTIVE FLAT PANEL WITH WINDOWS
24 smarttech.com/kb/170534
l If you have multiple displays for example and laptop connected to your E70, ensure that they
are set up correctly (See Setting up multiple displays).
l Check your graphics card configuration (see Graphics card configuration).
l Check your panel settings (see Panel settings).
l Calibrate or clear previously set calibration data (see ).
If there is no touchl Ensure that the USB cable is properly connected.
l Try power cycling the SMART Board E70.
l Ensure that Windows automatically installed the required device drivers the SMART E70 and
AFO TCM10X-700 HID should be listed under Windows Devices and Printers.
l If you have multiple displays, ensure the pen and touch are settings are correct (see Setting
up multiple displays).
Graphics card configurationIf you’re using an unsupported graphics card configuration, you may experience a display problem
or issues with touch accuracy. For example, you may experience issues if your graphics card
scaling option is set to something other than full-screen.
IMPORTANT
When using an ATI video card they must go into the ATI Catalyst Control panel, go to the Flat
Panel menu, select Pixel Format and change it to RGB 4:4:4 timing.
Panel settingsEnsure that you set the SMART Board E70’s Screen Mode to either 16:9 or Full and that you select
the correct input source.
Ensure that you set Screen Mode to 16:9 or Full, and that you select the correct input source.
To select input
On the remote or on the side panel press Input. Use the arrows to select the correct input
source.
APPENDIX ACONFIGURING AND CALIBRATING YOUR SMART BOARD E70 INTERACTIVE FLAT PANEL WITH WINDOWS
25 smarttech.com/kb/170534
To set Screen Mode
1. Press Menu on the remote or on the side panel.
The on-screen display menu appears.
2. Press the up and down buttons and select Setup.
3. Press the right button on the remote control or VOL- to select Screen Mode.
Select 16:9 if not already selected.
Setting up multiple displaysWhen you use your SMART Board E70 in a multiple display environment (that is, your computer has
an additional monitor or a built-in display), you must ensure that your display settings are
configured properly for your operating system.
Windows XP operating systemEnsure that:
l Your computer’s display is mirrored
OR
l The E70 is the primary display
Windows 7 or 8 operating systemTo set up the SMART Board E70 as your touch screen:
NOTES
l Ensure the resolution has been set to recommend settings prior to calibration.
l Steps to calibration, first Setup then Calibrate (only calibrate if required).a. Setup tells the system what device is a touch device and enables touch, test touch
device after Setup if touch is accurate the calibration step may not be required.
b. Calibration fine tunes touch points.
1. Open Control Panel > Tablet PC Settings. Ensure that the Display tab is visible. Ensure that
the Display tab is visible. Select SMART E70 from the Display drop down menu.
APPENDIX ACONFIGURING AND CALIBRATING YOUR SMART BOARD E70 INTERACTIVE FLAT PANEL WITH WINDOWS
26 smarttech.com/kb/170534
2. Click Setup Windows displays the following page; select Touch input.
3. Windows displays the following page on your first display:
4. If necessary, press Enter until the page is displayed on your touch screen.
5. Tap your touchscreen two or three times until the text changes.
APPENDIX ACONFIGURING AND CALIBRATING YOUR SMART BOARD E70 INTERACTIVE FLAT PANEL WITH WINDOWS
27 smarttech.com/kb/170534
6. Press enter to skip through any remaining screens until the window closes.
NOTE
Do not touch any further touch screens as the correct association between the selected
monitor and touch screen will be lost.
7. Click OK.
IMPORTANT
If you have difficulty with the above procedure, set up your E70 as the primary monitor (or
main display) and try again. You can switch your main display back to its original setting after
you have successfully identified the E70 as your touch screen.
Calibrating your E70with Windows 7 or 8Calibration ensures that your E70 recognizes the position of your pen. In Windows 7, when you
calibrate for the first time, the screen uses 16 different reference points. This initial calibration
applies to all users of the E70. If you calibrate again, only 4 points are used, and apply only to your
user account. http://windows.microsoft.com/en-ca/windows7/getting-more-out-of-your-tablet-pc
Under normal conditions, the SMART Board E70 should not require calibration. However,
calibration may be required if touch is inaccurate.
NOTE
Calibration should be done only by an administrator.
To calibrate your SMART Board E70:
1. Launch Control Panel -> Tablet and PC Settings. Ensure that the Display tab is visible. Select
E70 from the display drop down menu.
APPENDIX ACONFIGURING AND CALIBRATING YOUR SMART BOARD E70 INTERACTIVE FLAT PANEL WITH WINDOWS
28 smarttech.com/kb/170534
NOTE
If you have multiple monitors ensure that you have identified the SMART E70 interactive flat
panel as your touch screen with Windows 7 and Windows 8 operation systems, see
previous step "Setting up multiple displays"
2. Click Calibrate.
3. Then tap each cross as they appear.
NOTE
Each cross hair may take several attempts, so please be patient with this process.
4. Follow the instructions on screen.
APPENDIX ACONFIGURING AND CALIBRATING YOUR SMART BOARD E70 INTERACTIVE FLAT PANEL WITH WINDOWS
29 smarttech.com/kb/170534
5. When finished, click OK on the Tablet and PC settings page to commit your changes.
NOTE
If you make a mistake like tapping somewhere else other than the cross hair you will have to
repeat the procedure.
The process is complete.
TIP
To clear your calibration data; for example, if you accidentally performed the procedure,
click “Reset”.
Appendix B
31 smarttech.com/kb/170534
Appendix B: Calibrating your interactive flatpanel with Mac OS X
You need to calibrate the SMART Board E70 interactive flat panel after you install the software or if
you change the display resolution.
Calibrating your SMART Board E70Before you calibrate your SMART E70 interactive flat panel, ensure that you have installed the
required drivers. See smarttech.com/E70Software for product drivers and software.
To calibrate your SMART Board E70
1. Select the Orientation from system tray or SMART Settings
2.
The following screen is displayed on your first monitor.
If you have multiple monitors, press Esc on your keyboard until the page is visible on your E70
touch interface.
APPENDIX BCALIBRATING YOUR INTERACTIVE FLAT PANEL WITH MAC OS X
32 smarttech.com/kb/170534
3. Tap the cross. After a few seconds the following screen appears. In some cases, you may
have to tap twice.
4. Tap each cross as they appear once.
IMPORTANT
If there are multiple monitors, the orient screen will automatically move to the next monitor.
If this other monitor is NOT an E70 touch screen press ESC or click Cancel with the mouse. If
you accidentally touch the board while the screen is on this monitor, then you will have to
repeat the above procedure.
Appendix C
33 smarttech.com/kb/170534
Appendix C: Hardware environmentalcompliance
SMART Technologies supports global efforts to ensure that electronic equipment is manufactured,
sold and disposed of in a safe and environmentally friendly manner.
Waste Electrical and Electronic Equipment andBattery regulations (WEEE and Battery Directives)Electrical and electronic equipment and batteries contain substances that can be harmful to
the environment and to human health. The crossed-out wheeled bin symbol indicates that
products should be disposed of in the appropriate recycling stream and not as regular
waste.
BatteriesRemote contains 2 AAA batteries. Recycle or dispose of batteries properly.
More informationSee smarttech.com/compliance for more information.
Index
35 smarttech.com/kb/170534
A
accessoriesincluded 2
Audio settings 13
B
batteries 33
F
file formatscompatible 15
I
Included cables 2installation
choosing a location 4
L
light sources 4location 4
M
Menu control panel 12Multi Media mode 14
O
on-screen display menu 13
P
pen 2Picture settings 13projector
installing 3
R
Recommended computer screen
resolution 6remote control 2
S
serial numberlocating 19
Setup settings 14
T
Time settings 14tray 2
W
WEEE and Battery Directives 33
SMART TECHNOLOGIES
smarttech.com/support
smarttech.com/contactsupport
smarttech.com/kb/170534