SLIDING DOOR SYSTEMS: CALL: (09) 624-1180...SLIDING DOOR SYSTEMS: VITRIS 120 SOFT CLOSE VITRIS 120...
Transcript of SLIDING DOOR SYSTEMS: CALL: (09) 624-1180...SLIDING DOOR SYSTEMS: VITRIS 120 SOFT CLOSE VITRIS 120...
VITRIS 120 SOFT CLOSE D2 - D6
TENZA ULTRA SPAN SHOWER DOOR SYSTEM D7 - D8
VERONA SHOWER DOOR SYSTEM D9 - D11
EUROROLLER DOOR SYSTEM D12 - D13
POINT FIX DOOR SYSTEM D14
SLIDING DOOR SYSTEMS:INDEX
D1
CALL: (09) 624-1180www.euroglass.co.nz
CATALOGUE EFFECTIVE 1ST FEBRUARY 2017
SLIDING DOOR SYSTEMS:VITRIS 120 SOFT CLOSE
VITRIS 120 Soft close sliding system
Wall Mounted
EVW2SD 2m track, for single door
EVW4SD 4m track, for single door
EVW4DD 4m track, for double door
Ceiling Mounted
EVC2SD 2m track, for single door
EVC4SD 4m track, for single door
EVC4DD 4m track, for double door
Glass Mounted
EVCG1SD single door - threshold opening 1m
EVG12SD single door - threshold opening 1.2m
AVAILABLE FINISHES• Satin anodised aluminium• Selected powdercoat, lead time applies
TECHNICAL DETAILSEach pack includes:1 x soft close mechanism, track, end caps and cover,wheel assemblies, door stops and floor guide
Suitable for 8mm, 10mm and 12mm toughened glass or 8.76mm, 10.76mm and 12.76mm toughened laminated glass
Max load 120kg per door without soft close action
Max load 80kg per door with soft close action
D2
CALL: (09) 624-1180www.euroglass.co.nz
Wall and Ceilingmounted
Glass mounted
Ceiling mountedwith side panel
coverplate
SLIDING DOOR SYSTEMS:VITRIS 120 SOFT CLOSE
VITRIS 120 Soft close sliding system
GLASS DETAIL
D3
CALL: (09) 624-1180www.euroglass.co.nz
KeyA = glass width of sliding sashB = glass width of fixed sashBO = transom light width C = track lengthH1 = glass height of sliding sashH2 = glass height of fixed sashLH = clear heightLW = clear width (opening)LW t= clear width of door openingR = room height
Wall Mounted
Ceiling Mounted
13
Determination of glass height:H = R – 43 mm
Determination of glass width:A = LW + 70 mm (one sash)A = LW/2 + 33 mm (two sashes)
Determination of glass height:H = R – 43 mm
Determination of glass width:A = LW + 70 mm (one sash)A = LW/2 + 33 mm (two sashes)
Determination of glass height:H = R - 43mm
Determination of glass width:A = LW + 70mm (single door)A = LW/2 + 33mm (double door)
Determination of glass height:H = R - 43mm
Determination of glass width:A = LW + 70mm (single door)A = LW/2 + 33mm (double door)
SLIDING DOOR SYSTEMS:VITRIS 120 SOFT CLOSE
VITRIS 120 Soft close sliding system
D4
CALL: (09) 624-1180www.euroglass.co.nz
Track mounted to wall
Track mounted to ceiling
KeyA = glass width of sliding sashB = glass width of fixed sashBO = transom light width C = track lengthH1 = glass height of sliding sashH2 = glass height of fixed sashLH = clear heightLW = clear width (opening)LW t= clear width of door openingR = room height
SLIDING DOOR SYSTEMS:VITRIS 120 SOFT CLOSE
VITRIS 120 Soft close sliding system
Ceiling mounted with side panel coverplate
Glass calculations used on these drawings do not take into account any clearances or gaps for wall or floor glazing channels.Glazing channel clearances or glass gaps will need to be deducted in accordance with the type of glazing channel used.CU25 is compatible with this system (sold separately).
D5
CALL: (09) 624-1180www.euroglass.co.nz
KeyA = glass width of sliding sashB = glass width of fixed sashBO = transom light width C = track lengthH1 = glass height of sliding sashH2 = glass height of fixed sashLH = clear heightLW = clear width (opening)LW t= clear width of door openingR = room height
SLIDING DOOR SYSTEMS:VITRIS 120 SOFT CLOSE
VITRIS 120 Soft close sliding system
GLASS DETAIL
D6
CALL: (09) 624-1180www.euroglass.co.nz
KeyA = glass width of sliding sashB = glass width of fixed sashBO = transom light width C = track lengthH1 = glass height of sliding sashH2 = glass height of fixed sashLH = clear heightLW = clear width (opening)LW t= clear width of door openingR = room height
Glass Mounted
Track mounted to glass facade
Clear width1000mm
Clear width1200mm
TENZA SLIDING DOOR SYSTEMSLIDING DOOR SYSTEMS:
RG40 Tenza Ultra Span Sliding Door System
AVAILABLE FINISHESSatin anodised aluminium
APPLICATIONSShower enclosuresInterior home and office doors
TECHNICAL DETAILSSliding door track is mounted between two wallsTrack is unsupported, ceiling fixings are not requiredMax span of 2 meters from wall to wallMax door weight = 40kgsSide panels are easily glazed into the top track and floor channelFloor guide and floor stop is inserted into the side panel floor channel, screwing through the floor is not required
Supplied as a complete set. Each TENZA track pack contains;2m track, 2m track cover, 2m floor channel, 2m top track infill, 2x wheel assemblies, 2x top track door stops, 1x floor channel door guide, 1x floor channel door stop, 3x 2m clip on door bump seals and 2x track wall mounting brackets
Euroglass offer a specialist Tenza which spans up to 3 meters (lead time applies)
COMMON CONFIGURATIONS;
D7
CALL: (09) 624-1180www.euroglass.co.nz
Side panel with door(standard TENZA track pack)
Double side panel with door(additional bottom track stop required)
Centre panel with double door(additional fittings required)
41 mm
60 m
m
TENZA SLIDING DOOR SYSTEMSLIDING DOOR SYSTEMS:
RG40 Tenza Ultra Span Sliding Door System
GLASS DETAILS
D8
CALL: (09) 624-1180www.euroglass.co.nz
75mm
5.5mm
P= L-5 mm (max 2m)
52 m
m
H -5
8 m
m
31 m
mH
-37
mm
H
1,5 mm
6 m
m
8-10 mm
6 mm
SLIDING DOOR SYSTEMS:VERONA
SS30 Verona sliding shower kits
AVAILABLE FINISHES• Satin stainless steel
TECHNICAL DETAILSManufactured in stainless steelDesigned for 10mm toughened glassSuitable for both inline and square showersAble to be fixed to glass or solid wallsMaximum hanger load 45kg per doorRail is a rectangular hollow sectionRail height 50mm, thickness 10mm
Custom kits available upon request
D9
CALL: (09) 624-1180www.euroglass.co.nz
STANDARD SHOWER CONFIGURATIONS
Inlinewall-to-side panel
KIT A
SS30HHanger
SS30SMSide Panel Mount/Stop
Rail fastener
KIT A or B supplied based on the shower configurations above
Squarewall-to-side panel
KIT A
Inlinewall-to-wall
KIT B
SS30RAILRail
SS30ASAdjustable Stop
SSG10Floor Guide
KIT B
Squarewall-to-return panel
KIT A
Squarereturn-to-side panel
KIT ADoor opening 600mmRail length 1350mm
KIT BSpecify tight opening size on orderingMax opening width 1400mm
1 x Rail 1 x Rail
1 x Glass/Wall Mount 2 x Glass/Wall Mounts
1 x Side Panel Mount/Stop 2 x Hangers
2 x Hangers 1 x Adjustable Stop
1 x Rail End Plug 1 x Door Seals (3m)
1 x Door Seal (3m) 1 x Floor Guide
1 x Floor Guide
SS30WMGlass/Wall Mount
DS4Door Seal (3m length)
SLIDING DOOR SYSTEMS:VERONA
SS30 Verona sliding shower kits
GLASS CUTOUT DETAIL: KIT A
D10
CALL: (09) 624-1180www.euroglass.co.nz
600mm
SLIDING DOOR SYSTEMS:VERONA
SS30 Verona sliding shower kits
GLASS CUTOUT DETAIL: KIT B
D11
CALL: (09) 624-1180www.euroglass.co.nz
EUROROLLER RS10 SLIDING SYSTEMRS10-2SD 2m track, for single doorRS10-4SD 4m track, for single doorRS10-4DD 4m track, for double door
AVAILABLE FINISH
• Rollers - polished or satin stainless steel• Track - satin stainless steel
TECHNICAL DETAILS Each pack includes: Bottom Track (either 2m or 4m), Rollers & Stops, Felt brush seal (for channel), COM1 top channel guide (either 2m or 4m) and 2x COM3 End capsTwo rollers & two stops supplied per doorSuits 10mm and 12mm glass thicknessMax load 150kg per doorPlease contact us for package information for side panel solutions and refer to our website for further technical details
EUROROLLERSLIDING DOOR SYSTEMS:
D12
CALL: (09) 624-1180www.euroglass.co.nz
RS10-2SD single door 2m trackRS10-4SD single door 4m track
RS10-2T 2m TrackRS10-4T 4m Track
Max Roller Load 75kg per roller
RS10-R Roller detail
RS10-4DD double door 4m track
2m or 4m 4m
RS10-R Roller
SLIDING DOOR SYSTEMS:EUROROLLER
EUROROLLER RS10 SLIDING SYSTEMGLASS DETAIL
D13
CALL: (09) 624-1180www.euroglass.co.nz
45
17
R5
72
5R5
3
115
17
79
32
31
10
45
9
Ape
rtur
e
B
AG
lass
Hei
ght
= A
pert
ure
- 24
mm
Remove all burrs & sharp edges.
A:\
10
22
RS
10
Bot
tom
Rol
ler\
final
\1
02
2-1
RS
10
Rol
ler
Sys
tem
Cat
alog
Special Instructions:
A
17/05/11
17/05/11
1:25 of 6
65 Carr Road
New ZealandCatalog
1022-1
--
COPYRIGHT 2010�This drawing and or specification is the property of Euroglass Systems Ltd - and must be
Auckland
returned to them on request. Unauthorised use may result in Legal Action. Its contents must
Mt Roskill
+694 624-1180
Part Name:
Drawing No. Sheet:
Drawn:
Date:
Scale (A4):
G.BourneMaterial:
Finish:
PROJECTIONTHIRD ANGLE
DRAWN INREV MODIFICATIONS DATE
--
-
See component drawings
- RS10 Roller System
Polished Rollers
First Drawn
not be made public, nor copied, nor used directly or indirectly in any way.
Tolerance (Unless otherwise stated)Dec place 0.00 0.1mm 0.0 0.2mm 0 0.5mmAngular 0.5
Satin Rollers
Stop - glass cutout detail
Roller - glass cutout detail
RS10 CROSS SECTION DETAIL
70
SLIDING DOOR SYSTEMS:POINT FIX
POINT FIX SLIDING SYSTEMAVAILABLE FINISH• Satin stainless steel
SS1 Tube top railTECHNICAL DETAILS Cut to size per 1MIncludes 2 ends caps
SS3R/SS3F Glass hanger, round bar/flat bar
TECHNICAL DETAILS
Two required per doorAdjustable to suit 10mm and 12mm glass
SS4 Wall anchor for SS1 tube
SS5 Glass mount clamp
SS6 Wall mount clamp
SS7R StopTECHNICAL DETAILSSS7R = Round with spring stopSS7FL = Flat stop (left hand)SS7FR = Flat stop (right hand)
SSG10 Floor guideTECHNICAL DETAILSFor 10mm glassClips on to the channelNo fixings required
SS9 Sliding door finger pull
TECHNICAL DETAILSGlass hole size 48mm58mm o/a diaFits 8mm and 10mm glass
SS8 Floor guideTECHNICAL DETAILSAdjustable to suit 8mm, 10mm or 12mm glassBase thickness is 6mm
D14
CALL: (09) 624-1180www.euroglass.co.nz
Glass detail
Fixed Panel
Door
SS7R SS7FL or SS7FR (please specify left or right; left hand shown)