SIMATIC Overview Automation and Drives SIMATIC Industrial Automation System.
-
Upload
darleen-brown -
Category
Documents
-
view
247 -
download
5
Transcript of SIMATIC Overview Automation and Drives SIMATIC Industrial Automation System.
SIMATICOverview
Automation and Drives
Overview SIMATIC Industrial Automation System
Component based Automation
Controllers
Technology
Distributed I/O
Software /Programmers
Machine Vision
PC-based Automation
HMI / NET
PCS 7
Micro Automation
A&D AS, 07/2003, Chart 2 © Siemens AG 2003 - Subject to change without prior notice
Failsafe and fault-tolerant systems
System family
High-performance range
Medium range
Micro PLC
S7-200
+ Programming devices + STEP 7 software+ Distributed I/O+ Human machine interface
S7-400PC-basedControl
S7-300Controlsystem C7
Controllers
SIMATICOverview
Automation and Drives
Overview SIMATIC Industrial Automation System
Component based Automation
Controllers
Technology
Distributed I/O
Software /Programmers
Machine Vision
PC-based Automation
HMI / NET
PCS 7
Micro Automation
A&D AS, 07/2003, Chart 3 © Siemens AG 2003 - Subject to change without prior notice
Failsafe and fault-tolerant systems
SIMATIC S7-300 - the universal PLC
High level of efficiency Compact design requiring
a minimum amount of space, e.g. CPUs only 40 mm wide
Graded line of CPUs Integrated communications
interfaces Maintenance-free
Wide range of applications Extensive line of modules for an exceptionally wide
variety of applications, such as closed-loop control, positioning and cam control
Line of fail-safe CPUs: fail-safe and standard applications on a single CPU, making separate fail-safe controller unnecessary
System solutions for production engineering
Controllers
SIMATICOverview
Automation and Drives
Overview SIMATIC Industrial Automation System
Component based Automation
Controllers
Technology
Distributed I/O
Software /Programmers
Machine Vision
PC-based Automation
HMI / NET
PCS 7
Micro Automation
A&D AS, 07/2003, Chart 4 © Siemens AG 2003 - Subject to change without prior notice
Failsafe and fault-tolerant systems
SIMATIC S7-400 – our most powerful PLC
High performance High processing speeds
and determinism for short machine cycle times
Isochrone mode for controlling high-speed machines
Communication included Multicomputing Space-saving thanks to the highest
channel density among I/O modules
Wide range of applications Special machines, plant construction, process
industry High-availability and fail-safe applications
System solutions for production and process engineering
Controllers
SIMATICOverview
Automation and Drives
Overview SIMATIC Industrial Automation System
Component based Automation
Controllers
Technology
Distributed I/O
Software /Programmers
Machine Vision
PC-based Automation
HMI / NET
PCS 7
Micro Automation
A&D AS, 07/2003, Chart 5 © Siemens AG 2003 - Subject to change without prior notice
Failsafe and fault-tolerant systems
SIMATIC WinAC – PC-based Control
PC-based Automation with WinAC Control, data processing,
communication, visualization and technology on a single PC
Use of open PC-Standards (OPC, ActiveX)
Integration of existing C/C++ libraries and PC hardware
Wide range of applications Software PLC for data-intensive applications and for
real-time applications with deterministic behaviour Slot PLC with its own safety on board Software PLC for the Multi Panel MP 370 –
the compact and rugged solution
Controllers
SIMATIC WinAC – the flexible basis for innovative solutions
SIMATICOverview
Automation and Drives
Overview SIMATIC Industrial Automation System
Component based Automation
Controllers
Technology
Distributed I/O
Software /Programmers
Machine Vision
PC-based Automation
HMI / NET
PCS 7
Micro Automation
A&D AS, 07/2003, Chart 6 © Siemens AG 2003 - Subject to change without prior notice
Failsafe and fault-tolerant systems
Control Systems SIMATIC C7
S7-300 and Operator Panel in a single compact device
Location direct at the machine Less mounting effort through
ready-to-use complete solution Less initial costs compared
to modular solution
Complete machine controls in the most restricted possible
space
Controllers
SIMATICOverview
Automation and Drives
Overview SIMATIC Industrial Automation System
Component based Automation
Controllers
Technology
Distributed I/O
Software /Programmers
Machine Vision
PC-based Automation
HMI / NET
PCS 7
Micro Automation
A&D AS, 07/2003, Chart 7 © Siemens AG 2003 - Subject to change without prior notice
Failsafe and fault-tolerant systems
SIMATIC Safety Integrated – From proprietary solutions to failsafe PLCs
Failsafe and fault-tolerant systems
Previous solutionNew solution withSIMATIC Safety Integrated
Standard and failsafeI/O DP slave
Standardand failsafeI/O DP slave
PROFIBUS with PROFIsafe profile
Standardand failsafePLCs
EMERG-ENCY-OFF
EMERG-ENCY-OFF
EMERG-ENCY-OFF
EMERG-ENCY-OFF
e.g. Safety bus
Standard I/ODP slave
StandardI/O DP slave
POFIBUS
StandardSIMATICPLCs
Failsafethird-partyPLCs
EMERG-ENCY-OFF
EMERG-ENCY-OFF
SIMATICOverview
Automation and Drives
Overview SIMATIC Industrial Automation System
Component based Automation
Controllers
Technology
Distributed I/O
Software /Programmers
Machine Vision
PC-based Automation
HMI / NET
PCS 7
Micro Automation
A&D AS, 07/2003, Chart 8 © Siemens AG 2003 - Subject to change without prior notice
Failsafe and fault-tolerant systems
Fault-tolerant SIMATIC S7
Failsafe and fault-tolerant systems
Fault-tolerant,failsafe systems
SIMATIC S7-400FH The fault-tolerant
SIMATIC S7 for time-critical processes with switchvoer times < 100 ms
Compliance with the highest safety grades IEC 61508 (to SIL 3) EN 954 (to Category 4) IEC 61511 NFPA 79 – 2002
Fault-tolerant systems
SIMATIC S7-400H The fault-tolerant
SIMATIC S7 for time-critical processes with switchover times < 100 ms
SIMATIC S7 Software Redundancy The software solution
for non-time-critical processes with switchover times in the seconds range
SIMATICOverview
Automation and Drives
Overview SIMATIC Industrial Automation System
Component based Automation
Controllers
Technology
Distributed I/O
Software /Programmers
Machine Vision
PC-based Automation
HMI / NET
PCS 7
Micro Automation
A&D AS, 07/2003, Chart 9 © Siemens AG 2003 - Subject to change without prior notice
Failsafe and fault-tolerant systems
SIMATIC ET 200 Distributed I/O The right solution for any requirements
Benefits Saves space in the control
cabinet Cuts down on the amount
of wiring
Solutions for control cabinets From bit modular to block I/O With motor starters and failsafe modules For potentially explosive atmospheres
Solutions without control cabinets Modular, integrated motor starters and frequency
converters Low-cost block I/O Solution for robots, resistant to welding chips
Distributed I/O
SIMATICOverview
Automation and Drives
Overview SIMATIC Industrial Automation System
Component based Automation
Controllers
Technology
Distributed I/O
Software /Programmers
Machine Vision
PC-based Automation
HMI / NET
PCS 7
Micro Automation
A&D AS, 07/2003, Chart 10 © Siemens AG 2003 - Subject to change without prior notice
Failsafe and fault-tolerant systems
SIMATIC PCS 7 Process Control System – Fulfills all requirements made on a modern DCS
Uniform automation for production and process engineering based on SIMATIC
Plant-wide, consistent engineering for all components based on a common database
Flexibility attained through scalable performance and modular design
Distribution near the process too with intrinsically safe PROFIBUS PA
Highlights of the new version Configuration modifications during operation Very large framework quantities and high
performance Much shorter engineering and turnaround times Extremely powerful batch system with validation
support
PCS 7
SIMATICOverview
Automation and Drives
Overview SIMATIC Industrial Automation System
Component based Automation
Controllers
Technology
Distributed I/O
Software /Programmers
Machine Vision
PC-based Automation
HMI / NET
PCS 7
Micro Automation
A&D AS, 07/2003, Chart 11 © Siemens AG 2003 - Subject to change without prior notice
Failsafe and fault-tolerant systems
SIMATIC Software - For all phases of a project
Operation Diagnostics Remote maintenance
Test / Commissioning Simulation Diagnostics Test functions
Programming Standard languages Task-oriented
Hardware configuring Controllers I/Os Networks
Shorter test phase
Faster configuration
Software /Programmers
SIMATICOverview
Automation and Drives
Overview SIMATIC Industrial Automation System
Component based Automation
Controllers
Technology
Distributed I/O
Software /Programmers
Machine Vision
PC-based Automation
HMI / NET
PCS 7
Micro Automation
A&D AS, 07/2003, Chart 12 © Siemens AG 2003 - Subject to change without prior notice
Failsafe and fault-tolerant systems
SIMATIC PC – always the right industrial PC
SIMATIC Box PC for machine level use SIMATIC Rack PC for 19“ control cabinets and
consoles SIMATIC Panel PC for use direct at the machine, in
consoles or in control cabinets
Modern PC technology in rugged and industrial design
PC-based Automation
SIMATICOverview
Automation and Drives
Overview SIMATIC Industrial Automation System
Component based Automation
Controllers
Technology
Distributed I/O
Software /Programmers
Machine Vision
PC-based Automation
HMI / NET
PCS 7
Micro Automation
A&D AS, 07/2003, Chart 13 © Siemens AG 2003 - Subject to change without prior notice
Failsafe and fault-tolerant systems
Always completely in the picture with SIMATIC Machine Vision
Intelligent Vision Sensors for application-specific image processing VS 110 – Form inspection VS 120 – Object inspection VS 130 – Data-Matrix-Code Reader
General Purpose Systems – for universal use in any production system VS 710 Smart Camera VS 720-series:
VS 721 CMOS VS 722 Basic VS 723 Performance VS 724 High Resolution VS 725 Color
Machine Vision
SIMATICOverview
Automation and Drives
Overview SIMATIC Industrial Automation System
Component based Automation
Controllers
Technology
Distributed I/O
Software /Programmers
Machine Vision
PC-based Automation
HMI / NET
PCS 7
Micro Automation
A&D AS, 07/2003, Chart 14 © Siemens AG 2003 - Subject to change without prior notice
Failsafe and fault-tolerant systems
SIMATIC HMIOperator Devices for any Requirements Complete, price-optimized family for
applications near or at the machine:From the pushbutton control Panel up to Panel PC
For stationary or mobile use
High operating convenience with ergonomic keypad or intuitive touchscreen
Rugged and compact
Great variety of PLCs can be connected
Comprehensive language supportincluding Asian languages
One uniform configuration software: SIMATIC ProTool
HMI / NET
SIMATICOverview
Automation and Drives
Overview SIMATIC Industrial Automation System
Component based Automation
Controllers
Technology
Distributed I/O
Software /Programmers
Machine Vision
PC-based Automation
HMI / NET
PCS 7
Micro Automation
A&D AS, 07/2003, Chart 15 © Siemens AG 2003 - Subject to change without prior notice
Failsafe and fault-tolerant systems
Micro Automation – Logic module LOGO!
LOGO!Pure
LOGO!Basic
High functionality 34 ready to use functions 130 connectable blocks Display with backlit Max. 24DI/8AI/16DO Different expansion modules
Simple programming On the device or on the PC with LOGO!Soft Comfort Connection of functions via drag and drop Offline-Simulation and Online-Test Professionell Documentation
Low-priced solution for small automation tasksMicro Automation
SIMATICOverview
Automation and Drives
Overview SIMATIC Industrial Automation System
Component based Automation
Controllers
Technology
Distributed I/O
Software /Programmers
Machine Vision
PC-based Automation
HMI / NET
PCS 7
Micro Automation
A&D AS, 07/2003, Chart 16 © Siemens AG 2003 - Subject to change without prior notice
Failsafe and fault-tolerant systems
Micro Automation – Micro PLC S7-200
Modular with 5 CPU´s Open in communication
On-board communication (PPI) PROFIBUS slave AS Interface master Modem communication Ethernet and Internet connection Outstanding real-time response
Simpliest programming with 13 wizards
Extensive command set Operating and monitoring with
SIMATIC Text Display or Touch Panel
Micro Automation
SIMATIC S7-200 Low-priced PLC´s with extensive performance.