SFC 332 Data Sheet
-
Upload
omar-beltran -
Category
Documents
-
view
217 -
download
0
Transcript of SFC 332 Data Sheet
7/22/2019 SFC 332 Data Sheet
http://slidepdf.com/reader/full/sfc-332-data-sheet 1/4
SFC 332N / SFC 332P
Dynamic Flow Computers, Inc. © 2012
The SFC332 is a dual meter bi-directional field
mounted flow computer which can be used for all liquid and
gas applications, including custody or non-custody
measurements. Using orifice plate, Venturi,
turbine/PD/ultrasonic mass meter, or wedge devices, it can
meter a wide variety of products, such as crude, refinedproduct, LPG/NGL products, products that use table 24C,
ethylene, propylene, and water. Fifty days of previous daily
data, fifty previous batch data, and fifty previous hourly data
are stored in the full format type reports. The previous 100
audit trail reports and 100 alarm reports are stored. User
formatted reports and user formatted ticket reports are
available.
Sixteen different product files are user-configurable
and stored in memory with an easy switch feature to enable
the user to choose which product is being monitored at any
given time. Product scheduling for batch operation is also
available.
SFC332P
SFC332P prover flow computers store data for up to 60 meters and can easily be configured from
inside a vehicle with a laptop. With the push of a button proving is initiated for any of the 60 meters.
The flow computer controls the proving process and generates all the proving reports. When proving
is complete a printed report is automatically generated to a serial printer port. The data can also be retrieved
via a laptop at any time.
The SFC332P can be mounted on a prover trailer, which can be moved from field to field to provide
proving services.
Features Applications
32-bit processor Liquid and gas measurement
Multiple I/O options Wellhead measurement & automation
Custody transfer accuracy Custody measurement and control
Turbine diagnostics Compressor stations
Battery backup /UPS Well optimization
PID control
Prover (SFC332P)
Additional I/O options Reports/Storage
Stationary or portables Daily
Dual or single detectors Hourly
Supports 4-way valve control Monthly
Monthly day by day
Communications RS232 Modbus Alternative Power
RS485 Modbus Extended length battery backup
Analog and digital I/O Solar powered
7/22/2019 SFC 332 Data Sheet
http://slidepdf.com/reader/full/sfc-332-data-sheet 2/4
SFC 332N / SFC 332P
Dynamic Flow Computers, Inc. © 2012
The input/output assignment, flow equations, historical data storage, and other functions are carried
out using Dynamic Flow Computers’ DYNACOM® software. This software is Windows based, free of charge,
and available for download/update at any time on our website.
DYNACOM ® Software Capabilities:
Flow computer diagnostics Configure inputs and outputs
Configure PID control
Personalize report time and content
Configure and select the local LCD screen displayed parameters
Reassign and customize MODBUS® registers and values
Create and implement custom math and formulas
Input and output calibration
Automatic and periodic downloading of flow computer reports
Obtain historic data for display, saving, exportation, or printing
Historic data is available in the memory of the flow computer for download or display.
Maximum Report Storage:
Hourly reports: 1536 hours*
Daily reports: 64 *
Daily reports, hour by hour: 64*
Monthly reports: 6*
Monthly, day by day: 2 months*
Calibration reports: 20*
Audit reports: 100*
Alarm reports: 100*
Special reports: HTML, and others
*The number of reports stored can vary according to application.
PHYSICAL SPECIFICATIONS
Electrical/Conduit Connections Three 3/4" NPT.
Housing (Flow Computer) NEMA 4X class 1 div. 1 – IP66
RTD Connection To flow computer terminal block
Display Plasma; 2 Lines x 16 characters each line.
Temperature LimitsOperation: -40 to 185 °F (-40 to 85 °C)
Storage: -50 to 190 °F (-46 to 87 °C)
Humidity 100%
ELECTRICAL SPECIFICATIONS
Voltage 12 to 30 VDC
Power Consumption 4 watt
Solar Board (Optional) 10/20 watts, 12 volts
Polarity Reverse polarity protected
Processor 32 bits @ 16.7Mhz
FLASH ROM 4 MB @ 70 NANO seconds
ROM 2 MB @ 30 NANO seconds
Real Time Clock Years/Months/Days/Hours/Minutes
7/22/2019 SFC 332 Data Sheet
http://slidepdf.com/reader/full/sfc-332-data-sheet 3/4
SFC 332N / SFC 332P
Dynamic Flow Computers, Inc. © 2012
INPUT SPECIFICATIONS
Optic Isolation Each input is optically isolated with ±250 VDC chassis isolation
Analog Input
Four 4-20mA (or 0-5V) Inputs
(expandable to 6 inputs)
Resolution 24 bits
Pulse/Frequency Input
Three inputs (expandable to 4)
0 - 5000 HZ
Signal must be > 70 mV for sine wave
Signal must be > 6 volts for square wave
Input 3 is for square wave only
Digital/Switch Input
Four inputs
7-24VDC
0.25 Amp rating
RTD Input
Two inputs
(RTD Input uses/disables 2 analog inputs)
Direct connection to flow computer
4-wire RTD, 24 bit resolution
OUTPUT SPECIFICATIONS
Optic IsolationEach output is optically isolated with ±250 VDC chassis/ground
isolation
Digital/Switch Output
Three outputs
7-24VDC
0.25 Amp rating
Pulse Output
Two outputs
(can also be assigned as digital output for a total of 5 digital
outputs)
7-24VDC
0.5 Amp rating
On/Off or pulses (to 125 pulses/sec.)
Analog Output
Two outputs
4-20mA (external power required)
For PID control or for data transmission
Resolution 12 bits single ended
COMMUNICATION SPECIFICATIONS
RS485 Quantity 2 @ 1200 – 38400 bps
RS232 Quantity 1 @ 1200 – 19200 bps
Protocol MODBUS® RTU/ASCII
DIAGNOSTIC SPECIFICATIONS
Monitor/Alarm
Multivariable: P, DP, T
Analog Inputs/outputsDigital/switch inputs
Digital/switch outputs
Pulse/frequency inputs
Internal temperature
Battery voltage
Internal power supply
7/22/2019 SFC 332 Data Sheet
http://slidepdf.com/reader/full/sfc-332-data-sheet 4/4
SFC 332N / SFC 332P
Dynamic Flow Computers, Inc. © 2012
FLOW COMPUTATION SPECIFICATIONS
Number of Trains Two bi-directional (dependent on application)
Flow Calculation Simultaneous gas and liquid
Primary Elements
Differential:
Orifice, V-Cone, Wedge, Annubar, Venturi, etc.
Pulse/Frequency:
Turbine, PD, Vortex, Ultrasonic, etc.
Engineering Units US and Metric
Base Conditions60°F, 14.7 Psia (15 °C and 1 Kg. /Cm²)
68°F, 14.7 Psia (20 °C and 1 Kg/Cm²)
Equations
AGA3, API14.3, AGA7, AGA9, API5.6, API5.7, AGA8 methods 1,
2, and detailed; API 2540; API11-2-1, 11-2-1M; 11-2,2, 11-2-2M;
GPA15, 16; API2565; tables 5A,B; 6A,B,C; 23A,B,C; 24A,B,C;
53A,B; 54A,B,C; 23 and 24.
Others added continuously
Consult factory for complete list
Optional Accessories
RS-232 Elbow SmartCone®
Armored RTD Cable Solar Panel
Rosemount ® 205 Module