Servoi mechanical ventilation
18
Servo-i Meshal AlEnzi Respiratory therapist student
-
Upload
meshal-alenzi -
Category
Health & Medicine
-
view
934 -
download
5
description
respiratory mechanical ventilation icu servo i maquet presentation hospital
Transcript of Servoi mechanical ventilation
Servo-i Meshal AlEnziRespiratory therapist student
ObjectivesIntroduction for the servo- i ventilator
Describe the ventilator bodyDescribe the how it turn on and pre check test
Describe the screen of the ventilator
The servo-i ventilatorSERVO-i Ventilator System is intended for treating and monitoring patients
with respiratory failure or respiratory insufficiency.
Ventilator is equipped with AC power supply with automatic range selection. The ventilator is equipped with at least two battery modules which automatically supply power in case of an AC power failure
Used with :
neonates
pediatric
adults
The Ventilator Body1. User Interface for
setting ventilation modes, displaying patient data, and indicating alarms2. Patient Unit for mixing gases
3. Patient Breathing System for deliveringand exchanging gases
Ventilator Screen Describe
Main rotary dial
Fixed keys
Special function keysDirect access knobs
Turning on and pre check testFrom the back of the screen
You can turn it on.
Pre-use check includes tests and
measurements of: internal technical functionalitygas supply internal leakagepressure transducerssafety valveO2 cell / O2 sensor flow transducersbattery modulespatient breathing system leakagecircuit compliance
Click to add titleClick to add text
Additionalsettings
Additionalvalues
Standby
Do you want to start Pre-use check?
Yes No
to start ventilationPress
Click to add titleClick to add text
Set ventilation mode
Tidal volume
450
Resp. Rate
12
PEEP
3
O2 conc.
35
I:E
1:2.0
T. pause
10
T. Insp. rise
5
Trigger sensitivity
V
Basic I:E Trigger
.
Cancel Accept
Select ventilation mode
Volume control
Pressure control
Pressure Support/CPAP
PRVC
Volume Support
SIMV (PRVC)Pressure Support
SIMV (Press. Control)Pressure Support
SIMV (Vol. Control)Pressure Support
NAVA
Servo-i Ventilator Modes:Volume control:Pressure control:SIMVPRVCPS/CPAPNAVA
Set ventilation mode
Tidal volume
450
Resp. Rate
12
PEEP
3
O2 conc.
35
I:E
1:2.0
T. pause
10
T. Insp. rise
5
Trigger sensitivity
V
Basic I:E Trigger
The ventilator screen
Click to add titleClick to add text
Measured values appear here
Pplat (cmH2O)
28
40
Pmean 12PEEP 6
RR (b/min)
12
30
5O2 (%)
35
100
36I:E 1:2.
0MVe (l/min)
7.48.5
6.0VTi 440VTe 449
Wave form
Click to add titleClick to add text
Next page
Ppeak
Pplat
Pmean
PEEP
RR
O2
Vee
I:E
MVe
MVi
VTi
VTe
28
24
12
5
12
35
0
1:2.0
7.0
7.5
501
471
25-2-14
Click to add titleClick to add text
Next page
E
C static
PEEPtot
Re 24
Ri 17
C dyn 16
Tc
WOB tot 922
13;434
Click to add titleClick to add text
References http://www.maquet.com/us/product/SERVO-i-
Universal?parentNodeId=hlt5ls4uhttp://static.medonecapital.com/manuals/
userManuals/Maquet-Servo-i-Operator's-Manual.pdf
http://www.youtube.com/watch?v=KkT2eVgx45o
Any questions
Thank you all
