Service & Repair - Donutsdocshare04.docshare.tips/files/3595/35951240.pdf2 Sioux Chief Manufacturing...
Transcript of Service & Repair - Donutsdocshare04.docshare.tips/files/3595/35951240.pdf2 Sioux Chief Manufacturing...
Service & RepairService & RepairProducts
Innovative products from a manufacturer based in the United States of America.
Friendly customer service with 24-hour order turnaround. Next day air also available.
Centrally located in the United States for quick shipping with a 99% fill rate.
Sioux Chief Manufacturing tel: 1-800-821-39442
Wax Gaskets Tank Bolt Set
Tank Bowl KitsWaxless Gasket
Plastic Flush Valve
Flappers
Plastic flange extends • discharge opening
Fits 3" and 4" • waste lines
Meets Fed spec • TT-P-1536A
Cloth inserted washers•
7• ∕8" truss head with deep slot
Solid brass construction•
Sponge gasket with • solid brass tank-to-bowl bolts
Sponge rubber – ring • type or wide flange
Bowl setting • alternative to wax
Complete replacement • plastic flush valve with flapper
White body with • clear vinyl chemical resistant flapper
Includes 23-link • stainless steel chain
Smart Cap™
Closet Bolt Cover CapPatent pending
Base is installed between the bowl and nut.
Taller cap eliminates • the need to cut brass bolts
Base creates a tight • seal that helps provide a continuous sanitary seal between base and china
402-10
490-10500
490-10540ring type
490-10545wide flange
490-10555
442-2W
490-11150
490-10108
490-10115
490-10120
Replacement toilet • bowl flappers for Eljer, Kohler, American Standard and others
fax: 1-800-758-5950 www.siouxchief.com 3
Tensile strength • exceeds 1,100 lbs. per bolt
Corrosion proof•
Improved • adaptability—open end nut now fits ½" sockets, and fits under most bolt caps. Bolt base loads into any flange
Tank Handles Anti-Siphon Ballcock
Poly Tank Float Ball Closet Flange Floor Support
10" anti-siphon ballcock•
Coupling and locknut•
Synthetic washer • and vinyl refill tube
8" brass float rod•
High buoyancy • polyethylene float ball ¼" × 20 female thread
Repairs and replaces • rotted-out flooring around closet flanges
Heavy gauge, zinc • plated steel die-cut plates
Pre-slotted and • furnished with mounting screws
Wedge-It™
Multi-Purpose Stability Wedge
Stiff polypropylene • is drivable
Soft rubber-like PVC is • easy to trim and resists slipping on tile floors
Dozens of uses on • the job site, in the office, home, etc.
Corrosion proof•
Plumb Perfect™
Closet BoltPatent Nos: 217,458t; 249,227; 255,647
425421 427
460-10
490-10451
490-11322
490-10465
490-11159
490-11100
Metal replacement • tank handles for Kohler, Eljer, Mansfield, American Standard and others.
Save-A-Flange™
Closet Flange Repair Kit
490-11321
Renews broken • closet flanges
• 1 ∕8" stamped, zinc plated steel
3½"
2½"2"
¼"
115 ⁄16"
Sioux Chief Manufacturing tel: 1-800-821-39444
Long Branch™
Dishwasher Tailpiece
6"–12" lengths with • direct connect, fine thread and slip-joint connections
Downward inlet • eliminates splash-up
No connector • kits needed
Outlet WasteDirect Connect & Universal
Lavatory Drain
Brass DWV ConnectorDeSanko Fitting
DWV Slip Joint AdapterBrass Marvel Thread
Dishwasher Air Gap
1½" tube × • 1½" MIP/FIP
Solid brass body • and nut
Comes standard • with brass nut and grid strainer
1¼" × 6" 17-gauge • brass tailpiece
1¼", 1½", and 2" • female sweat × slip joint thread
Sweat on to copper • DWV pipe to make slip joint connections
Inlet ½" hose barb; • outlet ¾" hose barb
Molded polypropylene • body, full 3 ∕8" passageway
Spitting action • eliminated with design of inlet tube and inner cap249
274-7270-6
272-6
290-20514258-160253-550
200-064
Dishwasher Drain Connector Kit Dishwasher Drain Hose
EPDM dishwasher • drain hose has double-ply, polyester spiral reinforcement to make it durable and kink resistant
902
905
No-Putty Gasket™
290-203204¼" O.D.
290-203222" O.D.
290-203242¾" O.D.
Replaces plumbers • putty, won’t dry out, stain or smudge, no mess
Fits all standard • drain attachments
Stands up to the • toughest commercial cleaners
fax: 1-800-758-5950 www.siouxchief.com 5
Snap One™
Floor and Ceiling PlateCorrosion proof •
CTS sizes: ½"–1" • IPS sizes: ½"–3"
Available in white or • chrome plated ABS
Split for pre-piped jobs•
Trim Tite™
Escutcheon
Stainless Steel Supply Connectorsfor Lavatory or Closet
¼-Turn StopsAngle, Straight, and Dual Outlet
Faucet Aerator
Kitchen Hose Spray Kit and Accessories
Corrosion proof•
CTS sizes: • 3 ∕8"–1" IPS sizes: 3 ∕8"–2" Deep tubular: 1¼"–1½"
Low cost and attractive • appliance white color, an excellent substitute for chrome-plated or stainless steel escutcheons
Lavatory lengths: • 12", 16", 20", 30" Closet lengths: 9", 12", 20"
304 stainless steel • braided outer material
Flexible for ease • of installation
Connectors crimped • on for positive seal
Chrome plated brass•
2.0 GPM maximum•
½" sweat, PEX, • CPVC, FIP, & 5∕8" × 3∕8" compression
Chrome plated brass•
¼-turn positive • on and off
Oval handle for • ease of operation
UPC/IAPMO listed•
Universal coupling • connection: 1/8" MIP with 1/8" FIP × ¼" FIP
Accessories available • in black or white
Dry Seal Pipe Collar™
Water/Moisture BarrierPatent # 7,197,777
928-2
CTS sizes: ½"–1" • IPS sizes: ½"–¾"
Also a ½" shower • arm size
Helps keep moisture • out of wall cavity which helps eliminate MOLD growth
922-6W
920-2W
926-2
926-2W
109-310
109-S21110-FA21
242-10
281-12 284-12290-21100
P-Traps
1¼" and 1½" sizes •
Tubular polypropylene•
Wing nuts for easy • installation
234-10
Sioux Chief Manufacturing tel: 1-800-821-39446
Shower Arms and Accessories
Shower WallNut™
Shower Arm Adapter
Rear View
Optional sealant groove Shower WallNutLock ringCompression ferrulePrimary sealing component½" nom Type L copperBuna-N o-ringProvides backup sealBrass shower armEscutcheon clips
Stub out with copper tube, just like other fixtures•
Stub out to shower arm connection is made • outside the finished wall. No hidden leaks in the wall which promote mold growth
Do• NOT use pipe seal tape or pipe joint compound on shower arm threads
Tub Spout Escutcheon
For use with ½" • CTS, ½" or ¾" IPS
Chrome plated brass • with foam gasket
Covers unsightly • stain marks
chrome
oil-rubbed bronze
polished brass
satin nickel
pearl nickel
white enamel
Retro-fit kit (616-02C8L) for replacing loose, wobbly shower arms (where a drop-ear elbow is used).
616-02
972-100
8"
6"
4"
Tug Spout™
Tub SpoutPatent #7373674
Installs directly onto ½" copper stub • out with only #2 Phillips screwdriver
Slip-fit convenience•
Caulk around Dry Seal Pipe • Collar, not around the Tug Spout
Tugging mechanism tightens • spout securely to wall
972-32RB 972-36SN972-32
974-60300
974-6031510" rise
974-60304
974-60310
Includes Dry Seal Pipe CollarKeeps moisture from wall cavity to help eliminate mold
fax: 1-800-758-5950 www.siouxchief.com 7
JackRabbit™
Jacking Bolt Shower Drain
Perfect for replacement applications • when workspace is restricted by building members and existing pipe
Unique design uses stainless steel • “jacking bolts” and a pressure plate washer to create a seal—no need to wrench tighten the outer locknut
Brass body, locknut and • pressure plate washer with elastomer no-caulk gasket
Shower DrainsSolvent Weld Module Drain No-Caulk Module Drain Solvent Weld Pan Drain
Replacement Strainersfor Drains
827-2J
825-20P821-200PNR 821-200PNQ
827-2B
828-2
Stainless Steel PVD Polished Brass
Oil-Rubbed Bronze
Satin CopperSatin Nickel Antique Brass White EnamelPearl Nickel
Sioux Chief Manufacturing tel: 1-800-821-39448
846-59PK 868-5P
869-4P
Urinal Flange Kit
2" hub, spigot or inside • fit connections available
Kit includes: stainless • steel bolts, nuts, washers, and gaskets
New inside fit • connection allows pipe to be cut flush with finished wall
Cast Iron StrainerGeneral Purpose
Smart Saddle™
DWV Saddle Tee Fitting
Backup Float Valve Backwater Device
DWV Backwater Valve PVC or ABS Solvent Weld Connection
Inside Pipe Drain
845-4PS
845-4P
Sizes: 4• 3 ∕8", 5", 6", 6¼", 6½", 65∕8", 67∕8", 7", 8", and 87∕8"
Cast iron strainers • are ¼" thick and epoxy coated for corrosion resistance
PVC and ABS in • hub sizes 2"–6"
Extension sleeve • also available
CSA certified (B181.1 • and B181.2); UPC/IAPMO listed
Valve: 2", 3", 4" sizes•
Device: 2" MIP Body•
PVC and ABS: 2"–4"•
Solvent welds inside • pipe, flush to floor
Great for direct vent • furnaces and water heaters, or to cover any open ended pipe
3" and 4" trunk • sizes with 1½"–4" hub inlets
Stainless steel bands • provide torque, eliminating points that damage pipe and create a poor seal
847-7
Replace-It™ Adjustable Drain Strainer
Patent # 4,871,451
Gripper®
Stainless Steel Pipe Strainer
Replace rusted or • broken cast iron strainers or bar grates
Heavy gauge • stainless steel
7¼" diameter fits • 3¼"–6¾" openings; 9¼" diameter fits 5¼"–8¾" openings
2"–4" sizes •
Gripping fingers fit • snugly inside pipe keeping strainer securely in place
Heavy gauge • stainless steel—100% corrosion proof
803-2PK2
891-0312P
847-3
802-7
fax: 1-800-758-5950 www.siouxchief.com 9
TKO™
Total Knockout Closet FlangePatent #5,377,361
886-4PT
884-PTM
Push-Tite™
Gasketed Closet Flange
887-GPTM
888-GPM
PVC and ABS, • 3" spigot, 3" hub, 3" Sch. 30 hub, 4" spigot, 4" hub
Over ten years of • proven performance
Knockout will not • break apart and cannot fall down drain pipe
Strong, corrosion-• resistant stainless steel ring eliminates cracked flanges
Easier installation, no • need to hold knockout while hammering
Holds five floors (22 • PSI) for head test
PVC and ABS, 3" • and 4" inside fit
Gasket seals inside • DWV pipe
Engineered elastomer • gasket is chemical and heat resistant
Full Flush™
Offset Closet Flange
Full-flow, 3" I.D. throat•
Also available in • a TKO version
Allows for 1 ½" offset • in any direction for closet bowl setting
Solvent welds over 3" • or inside 4" Sch. 40 PVC or ABS DWV
Drop-Kick™
45° Offset Closet Flange
Full-flow, 3" I.D. • throat—no restriction
Solvent welds inside • 3" Sch. 40 PVC or ABS fitting hub
Corrosion-resistant • stainless steel swivel ring is engineered for maximum strength
Brass Closet Flange Ring
890-4BPK
890-4BDPK
Solid brass•
For use with lead pipe•
Deep seal model • provides more surface area for better joint
Ringer™
Stainless Steel Closet Ring
Stainless steel ring is • corrosion resistant
Perfect for repairs • to damaged closet flanges, or new concrete floor installations
Fits securely over • damaged flanges
Raise-A-Ring™
Closet Flange Extension Ring
Can be stacked • if needed
Build up existing flange • when added subfloor, tile, etc. leaves flange at or below floor level
886-R is • 7∕16" thick
886-RQ is ¼" thick•
889-POM
889-45PM
886-MR
886-R
886-RQ
Sioux Chief Manufacturing tel: 1-800-821-394410
Finish Line™
Adjustable Floor Drain
Available with • 2"–4" connections
Adjustable before and • AFTER the pour
ABS/PVC or ductile • Base Adapter, ABS or ductile Coring Sleeve and Head Adapter. Poly Coring Plug
Nickel-bronze strainers•
Finish Line™
Adjustable Cleanout
Available with • 2"–4" connections
Adjustable before and • AFTER the pour up to ¼"
ABS/PVC or ductile Base • Adapter, ABS or ductile Coring Sleeve and Head Adapter. Poly Coring Plug
Nickel-bronze or • Tenzalloy covers
Cleanout Cover Kit20 Gauge Stainless Steel
Available with 9" wall • bar or countersunk brass plug
Plugs available in • 4", 5" and 6"
Covers available • in 3"–8"
Slotted Polypro Flush Plug
Sizes: 1½", 2", 2½", 3", • 3½", 4", 5", and 6"
With or without • threaded brass insert
Acid-resistant and • chemically inert
Glass-filled • polypropylene will not seize on ABS, PVC or cast iron
832-36ANR
832-4PNQ
834-4PNQ
834-3ANR
873-240878-15
Cleanout Bushing
PVC and ABS, 2" to • 4" Sch. 40 inside fit
Plugs have threaded • brass inserts
Cleanout bushing kits • includes: bushing, 16-gauge stainless steel cleanout cover, ¾" stainless steel bolt
875-8230P875-2P
Adjust after the pour with the Finish Line.
832-S4
fax: 1-800-758-5950 www.siouxchief.com 11
Hydra-Rester®
Commercial Water Hammer Arrester
Vacu-Rester™ Vacuum Breaker Arrester
A–F unit sizes with • ½" –1" connection sizes
Certified by the • American Society of Sanitary Engineering to the ANSI/ASSE 1010-2004 Standard
Lifetime cycle tested • to withstand 10,000 shock cycles
½"–1" connection sizes •
To prevent cavitation • and accompanying water hammer within the extra-long tub spout tubes and/or shower risers of high-flow fixtures, such as garden tub valves and multi-head shower valves
Prime Perfect™
Trap Primer Valve
Automatically activates • to replenish evaporated water in floor drain traps to prevent the escape of sewer gases
Large port openings • in debris screen prevent clogging from sediment and debris
Water release is • factory set. No field adjustment necessary
Single trap primer • can service up to eight traps using splitter and distributors
Certified by the • American Society of Sanitary Engineering to the ASSE 1018-2001 Standard
Cold water supply lineTrap primerVacuum breaker
Gravity line to trapFloor drain
Trap
Mini-Rester™
Residential Water Hammer Arrester
All Mini-Resters are approved for sealed wall • installations with no access panel required
Certified by ASSE as AA size to the • ANSI/ASSE 1010-2004 Standard
May be installed at any angle•
Permanent, pressurized air-cushion
Piston moves and compresses air cushion
Pressure spike generated by valve closure
Water flowQuick closing valve
Piston at rest
660-SB½" male sweat
660-V82B½" male CPVC
660-H¾" hose thread
660-2½" MIP thread
660-TKB 660-TRB
660-TB⅝" compression tee
660-TRB⅝" O.D. compression
× ⅝" O.D. female compression
660-TKBfemale × male ballcock thread
653-BS
652-AD
695-01
653-B
Sioux Chief Manufacturing tel: 1-800-821-394412
TouchDown™ Universal Pipe Clamp
Patent # 6,126,122
TouchDown II™ Large Universal Pipe Clamp
Patent # 6,126,122
Totem™
Offset CTS Hanger
Hangs Tuff™ Pipe Hanger
Patent # 5,385,320 Canadian Patent # 2,125,249
ZipStick™ Universal Pipe Hanger
Clamps ¼" – 1" CTS pipe (copper, PEX, CPVC, • PB) and 1 ∕8" – 1" Sch. 40 pipe (steel or plastic)
Releasable locking mechanism•
Variable clamping tension allows for • expansion and contraction of tube
Provides ¼" stand-off•
Clamps ½" – 2" CTS • CTS pipe (copper, PEX, CPVC, PB) and 3 ∕8" – 2" Sch. 40 pipe (steel or plastic)
Releasable locking • mechanism
½" and ¾" CTS sizes •
1" offset from mounting • surface to bottom of tube (copper, PEX, CPVC, PB)
Locking finger holds • pipe securely in place
1½"–4" DWV•
Also available in • ½"–1¼" CTS
Strong and rigid • I-beam design keeps pipe secure
Impact resistant ABS•
Cradle hangs any pipe • from 1" CTS to 6" IPS
White or black, with • 10", 14" or 26" stems
Pick-Up Talon™
Isolating Drive HookPatent #7,207,530
556-3C
556-3S
½" to 1" CTS sizes •
The most affordable • solution to keeping tube (copper, PEX, CPVC, PB) off the mounting surface
Install in alternating • directions to ensure secure piping
550-11
550-20
553-9W553-014W
552-A2
552-B22
552-B33
550-2T
TouchDown II™ Strut ClampLarge Universal Pipe Clamp for Strut
No tools required • for fast and easy installation
One clamp fits ½" • CTS–2" IPS
fax: 1-800-758-5950 www.siouxchief.com 13
Strong Arm™
Bracketing System with
Lock Block™
CTS Tube ClampPatent Pending
Power Bar™
Universal Slider BracketPatent Nos. 6,446,915 and 6,402,096
Grid Iron™
Universal Bracketing SystemPatent # 5,876,000
½" to 1" CTS Lock • Blocks are pre-assembled on each pair of brackets
Rigidly secures copper • stub out and prevents all movement
Position stub outs at • any desired location within the stud bay
Available for 16" • and 24" stud bays
Lock Blocks compress • on tube and brackets once screws are tightened down
Use with ½"–1" • CTS pipe (copper, PEX, CPVC)
Galvanized steel • bracket and tough plastic clamp is strong and supports pipe without bowing
Available with one, two, • or three TouchDown clamps pre-loaded to reduce installation time
Smaller bracket • expands to fit openings from 9" to 16"
Larger bracket • expands to fit openings from 14" to 26"
Fits inside 2 × 4 • wall when strapped to 2" pipe
1" on-center grooves • in bracket
Ideal for island sinks•
Great pipe organizer • for slab jobs
525-1622
523-2424
571-145
Copper Star™
Locking Tube Nut
½"–1" CTS sizes •
20 gauge pure • copper, 2" O.D.
Slides over and locks • copper tube into place
Secures copper tube • when penetrating walls and floors
612-2
Suspensulator™ Tube Suspension Clamp & Insulator
½" to 1" CTS•
Designed to work in • both 13∕8" or 111∕32" holes in wood or metal studs
Split design allows for • use after piping is run
Corrosion proof•
558-E2
Sioux Chief Manufacturing tel: 1-800-821-394414
Frost-Proof Anti-Siphon Sillcock¼-Turn Valve
Longer stem keeps • knuckles from scraping on hose threads
Thicker, easier-• turning metal handle
Nickel-plated • brass body
Full-slip sweat and • compression models for easy replacement
CPVC Frost-Proof Sillcock¼"-Turn Valve
Longer stem keeps • knuckles from scraping on hose threads
8" and 10" lengths • available
Thicker, easier turning • metal handle
Nickel-plated • brass body
Elbow Adapter
Straight Adapter
645WC3CPVC × F1960 PEX cold expansionSizes: ½"–1"
646X2MIP × F1807 PEX crimpSizes: ⅜"–1" PEX × ½"–1" MIP
637-X721⅜" OD compression × F1807 PEX crimpSizes: ⅜"–½" PEX
643C211male sweat × CPVCSizes: ½"–2"
643-P722male sweat × PVCSizes: ¾"–2"
646-P3MIP × PVCSizes: ¾"–2"
647-P3FIP × PVCSizes: ¾"–2"
645 XC2CPVC × F1807 PEX crimpSizes: ½"–1"
647-X3FIP × F1807 PEX crimpSizes: ½"–1"
643X2male sweat × F1807 PEX crimpSizes: ⅜"–1"
637C20FIP swivel × CPVCSizes: ½"–1"
646-C2MIP × CPVCSizes: ½"–2"
647-C2FIP × CPVCSizes: ½"–2"
119-208Lengths: 4"–10"
119-210PK Length: 10"
Plus 6" full slip
119-210CPKLength: 10"
Plus 2" full slip
119-C210
632X222Male sweat × F1807 PEX crimpSizes: ⅜"–¾"
632X222MMIP × F1807 PEX crimpSizes: ⅜"–¾"
632X217⅜" OD compression × F1807 PEX crimpSizes: ½" PEX × ⅜" O.D. compression
637X235FIP swivel × F1807 PEX crimpSizes: ½", ¾" PEX × ¾" FIP swivel
PEX (F1807, F2080)•
CPVC•
PVC•
Sweat•
fax: 1-800-758-5950 www.siouxchief.com 15
Tankless Water Heater Connector KitSweat & FIP Connections
¾" full port ball valves•
Integrated all brass • tee for pressure valve
¼-turn drain valves • for drainage/flushing
Pressure valve • and installation instructions included
690-0101
Replace-A-Valve™
Full-Port Ball Valve Sweat or Compression Connection
600-204CV
600-204V
Full-Slip Repair CouplingsSweat or Compression Connection
600-206Lengths: 3", 6", 12"
600-206CLengths: 6", 12"
Add-A-Line™
Full-Slip Valve Tee
601-20CV
601-22CVM
601-22VX
½" and ¾" full-• slip tailpieces for easy installation
Sweat or compression • models
Full port ball valves•
½" and ¾" full-slip • copper repair couplings
Safe for repair of cold • and hot water lines
Sweat and • compression models
Valved tees come • in ¼" and 3 ∕8" oD compression, ½" female sweat × MIP and ½" F1807 PEX crimp
New one-piece forged • brass compression and sweat tee body5• ∕8" or 7 ∕8" O.D. compression trunks provide easy and totally torchless installations
½" or ¾" full-slip • sweat trunks
Perfect for adding • humidifiers, dishwashers, ice makers, or any new water line easily
Quality brass ball • valve replaces cheap saddle valves that leak and clog
601-30CVPK
Full-Slip Male AdapterBrass Female Sweat × MIP Thread
With compression • model, use wherever ½" MIP threads must be replaced without soldering
¾" and 1" sizes are • ideal for closet or urinal stub out adapters
Full-slip fitting slides • completely over ½" CTS
614-2
614-22C⅝" compression × ½" MIP
6¼"
9⅜"
Sioux Chief Manufacturing tel: 1-800-821-394416
Water Heater ConnectorIndividual or by Kit
A• Hot Side Connector
B• Cold Side Connector
C• Dielectric Nipple Option
D• Expansion Tank Option
DAB
C C
All Sioux Chief water heater connectors • are available with ¾" and 1" MIP or FIP swivel connection
Full-slip sweat or • 7∕8" O.D. compression connections offer options for copper systems
Easy installations with flexible • corrugated connectors and ¾" type-L copper in both straight or elbow
All connectors are available in a variety • of lengths to meet CPVC and PEX manufacturer installation instructions, IPC and UPC model codes and Plastic Pipe and Fitting Association guidelines for electric and gas water heater installations
Cold side connectors have 600 • WOG full port ball valve
Water heater connectors with a ¾" FIP branch • for a two gallon expansion tank are available
633-312
633-312
633-3TM15633-312FP631-XSHot PEX offset
Hot full-slip male sweat
Cold CPVC with expansion arm
Cold CPVC Cold full-slip male sweat
Cold MIP with expansion arm
Cold CPVC flexible
Cold PEX flexible
Cold CPVC elbow
634-X418FP 631C307FP633C18B 634C118FP633-C18FPT
full-
slip
slid
e do
wn
& ti
ghte
n
fax: 1-800-758-5950 www.siouxchief.com 17
Ox Box™ Washing Machine Outlet Box
Patent Pending
Available with Mini-Rester • water hammer arresters
Boxes mount securely to stud•
Separates supply and drainage • systems into two stud bays
Separate boxes offer flexible layout•
Durable ABS stands up to job site abuse•
Drain knockout is easy to • remove with pliers
Debris covers included to protect • boxes from drywall mud and paint
High-quality quarter-turn ball valves•
¾" male hose-thread outlet connections•
696-2313MF
Access PanelOne and Two Piece
Provides economical access to pressure and • drainage plumbing, pipes, and wiring
Surface allows for painting and wallpapering•
1• ∕8" thick
Four countersunk holes•
970-2087½" × 7½"17" × 17"
970-11212" × 12" 17" × 17"
Ox Box™ Patent Pending
696-1010MF 696-2001MF 696-1011MF
Toilet/Dishwasher Outlet BoxLavatory Outlet BoxIce Maker Outlet Box
Sioux Chief Manufacturing tel: 1-800-821-394418
Mini HacksawPistol Grip & Standard
Inside Pipe Cutter
Steel blade for • plastic pipe
Abrasive disc for • plastic or steel pipe
Wire Cable Saw
Cuts PVC pipe in • tight spaces
Disposable, good for • approx. 40 cuts
Plastic Tube Cutter
FlangeBuster®
Closet Flange Remover
Removes 4" inside • mounted plastic closet flanges without damaging the surrounding floor or existing pipe
Connects to any • common power drill
Separate screw sets • the 6" blade tension
Good for fine work • in small areas. Six inch steel blade cuts copper & brass tube, bolts, steel, wood, and plaster
Quickly cut PEX, • PVC, CPVC, and other poly pipe or non-metallic hose
For 1 • 1 ∕8" O.D. tube or smaller
301-062390-50163
390-50153
390-50105304-08
304-60
Sawhorse™
Multi-Purpose SawHigh-quality, hardened-steel blade remains • sharp through thousands of cuts
Perfect for plastic pipe, wood, and • many other materials
12" model has 13 teeth/inch for fine cutting. Teeth • are on the nose for notching in tight areas and starting cuts in the middle of floor or wall
20" model has 10 teeth/inch for faster cutting•
Both include plastic teeth protector•
300-12
300-20
304-25
304-30
Tube Cutters
fax: 1-800-758-5950 www.siouxchief.com 19
306-10313-08
Offset Ratchet Box Wrench
25° offset angle•
Reach tight situations • without scraping your knuckles
Speed and convenience • of ratcheting box wrench
Reverse by • flipping lever
316-2⅜" × 7⁄16"½" × 9 ⁄16"
P.O. Plug WrenchTelescopic Basin Wrench
Faucet Seat Wrench
Fitting BrushesAcid Brush
Tube O.D. Brush
Faucet Nut Wrench
Slip Joint PliersMini Angle-Nose Pliers
Abrasive Mesh
Socket Wrench Set
Heavy Duty Pipe Wrench
Jaw capacity: • 3 ∕8"–11∕8"
Nickel plated finish • for long life
6" long leverage bar•
Length adjusts to 9½", • 12", 14", and 16½"
Malleable iron•
Holds P.O. plug • and basket straight during installation
Ratchet wrench set has • two square and one hex wrench plus a ratchet in a resealable case
390-50198390-50197
390-50130
701-2 771710-2730-10
390-50310
311-10
Faucet Handle Puller
318-4
Removes larger • handles with longer adjustable puller arms
One piece cast cross • bar for strength and durability
Notches ensure • positive and equal positioning of puller arms on cross bar
Alloy steel components•
390-50191
Sioux Chief Manufacturing tel: 1-800-821-394420
312-2 has a funnel-• shaped cap which is retractable for use in flat sinks
390-50148 has an • extra large bulb for extra thrust
6-in-1 Screwdriver
Hex Key Set Flaring Tools“Papco” Style Deluxe
LevelsTorpedo
Deburring Tool
Includes one dual • ended slotted bit, one dual ended Phillips bit and one 5 ∕16" × ¼" nut driver shank
Replacement • bits available
3• ∕16" O.D. to 5 ∕8" O.D.
Strong, accurate 9" • polycast frame
Non-conductive frame•
Vials read plumb, • level and 45°
Tools for PEX & PB Crimp RingsRight Angle Steel Handle Crimp Ring Removal Tool
Offset tool crimps • rings to ASTM F1807 on 3∕8"–1" pipe
Removal tool allows • for fitting recovery without damaging the fitting sealing surfaces305-91
314-10
318-9
310-09
310-12
308-2
304-06
305-99
Faucet Stem Key
390-50134
Fits: ¼", • 9 ∕32", 5 ∕16" & 11 ∕32" faucet and sillcock stems
Plunger
312-2
390-50148
O-Ring Pick
390-50138
fax: 1-800-758-5950 www.siouxchief.com 21
PTFE Packing Rope
Oakum Cement Stop Leak
Perfect for patching • sewer outlet, water service and around drains
Sets up in five minutes•
Mixing cups included • in each jar
5 lb. plastic jar•
Use to pack spigot type • cast iron pipe, cracks around doors, windows, driveways, etc.
Does not irritate skin•
Inspection Mirror
390-50115
Match Holder
PTFE Pipe Thread Tape
390-50110
291-30400
963-15PK2963-05
Disposable Latex Glove Disposable Shoe Covers
Extra large disposable • latex gloves
Powder-free, fits • right or left hand
This product contains • natural rubber latex which may cause allergic reactions in some individuals
Covers dirty work • boots—saves clean up time
Blue-spun • polypropylene, non-waterproof
Fits over shoe • sizes 5–15
390-50178 390-50176
Shower Arm Installation Tool Patent # 6,460,432
Easier shower arm • installations
Allows shower arm • installation with no external marring
Can be used on all • brass shower arms
307-625
335-260
Sioux Chief Manufacturing tel: 1-800-821-394422
Test Titan™ Mechanical Test Plug
Test Titan™ Cleanout Test Plug
Sizes: 1½", 2", 3", 4" mechanical •
For head tests•
Provides a leak-free seal at over EIGHT times • the PSI of other mechanical test plugs
Back-to-front wedge design prevents • blowouts at high and low temperatures
For cleanouts•
Seals 1 ½"–4" female cleanout threads•
Ideal for use on damaged cleanout openings • and on damaged or deteriorated threads
882-3
882-35
Silicone Lubricantfor O-Rings & Valve Stems
Safe-Flame™
Flame Protection Pad
Dow Corning 111, • FDA approved
Does not deteriorate • o-rings and other EPDM, buna, or rubber seats/seals
Temperature range • –40°F to 400°F
Absorbs heat•
No smoke or odor•
Non asbestos•
9" × 12" blanket• 963-01 390-50160
Test Titan seals from back of gasket to front vs. generic plugs that seal from middle out. The larger gasket allows for sealing uneven cuts.
Test Titan’s shoulder provides a better seal on the top of a pipe vs. a generic plug’s steel plate.
Hollow stem allows the system to be filled with water and provides a controlled drain down with a standard garden hose (stem thread is ¾" male hose thread).
fax: 1-800-758-5950 www.siouxchief.com 23
ETCO Expandable Pipe Plug Handy Pump™ Cordless Air Pump
Sizes: ½"–8" •
Cleanout or test • plug for drains and DWV pipe
Can be used with • cast iron, steel, clay and plastic pipe
Economical and • re-usable
Positive sealing• 12V Ni-Cad battery•
150 PSI capacity•
12V connector for • direct voltage supply
Integral digital • pressure gauge
Digital readout • requires two AAA batteries (supplied)
Great for test balls, • expansion tanks, hydrostatic tests
Trigger action with • “lock on” feature
882-ST302882-ECPG
Gas Test Gauge
Three pressure • ranges: 0–15 PSI up to 0–60 PSI
2" diameter steel • case with a shatter proof face
Brass plated body • with brass air valve
Replacement gauge and • manifold available
WOG Pressure Gauge
Five pressure • ranges: 0–60 PSI up to 0–300 PSI
¼" MIP connection •
May be used for • water, oil and gas
2" diameter steel case•
Test AssembliesCombination Air & Water
Air Test Fitting Water Pressure Test Fitting
¾" brass female hose • swivel connection
Use for residential or • commercial tests
Drag pointer indicator • for overnight tests
355-30PK1
356-100PK1 360-300PK1
882-110882-105
Grip Tip™
Test Cap & Test PlugPatent # 6,769,291
881-12C
880-82
Tip acts as a handle • while applying glue and can be snipped for testing
Deeper glue surface•
Durable, virgin ABS • may be glued to pipe with all-purpose glue
24110 South Peculiar DrivePeculiar, Missouri 64078tel: 1-800-821-3944fax: 1-800-758-5950www.siouxchief.com
DISTRIBUTED By
SERVICE & REPAIR BROCHURE – 3/09 ©2009 SIOUX CHIEF MANUFACTURING
Packaging Options Order Catalog
Or visit www.siouxchief.com to order a Sioux Chief cata-log with our complete product offering.
Fill out this form and fax to Sioux Chief at 1-800-758-5950 or mail to PO Box 397, Peculiar, MO, 64078. We will promptly send you a Sioux Chief catalog.
Name �����������������������������������������������
Company ��������������������������������������������
Address ���������������������������������������������
������������������������������������������������������
City �������������������������������������������������
State ������������������������������� ZIP ������������
Phone �����������������������������������������������
Email �����������������������������������������������
HearthMaster™
Log Lighter AccessoriesHearthMaster™
Gas Ball Valve
Angle or straight • ball valves
Cast brass bodies • with P.T.F.E. seats
½" FIP × ½" FIP with • ¾" NPSM flange thread
150,000 BTU/hr or • 350,000 BTU/hr
For use with both • natural gas and LP gas
949-K09949-P
952
954
949-06