Business Model Innovation by Business Models Inc. Training Summary
Sensoptic
-
Upload
jorge-longoria-pena -
Category
Business
-
view
250 -
download
2
Transcript of Sensoptic
MARCH 2012 • SENSOPTIC SA • 6616 LOSONE • SWITZERLAND • [email protected] • WWW.SENSOPTIC.CH
FAULT DETECTION EQUIPMENT FOR WIRES
SENSOPTIC is a Swiss company specialized in providing innovative optical measuring systems for precision control of surface quality and diameter defects of wires and filaments. We support our customers with the design, process integration and operation of automatic turnkey systems which include proprietary optical PROFILE SENSORS, SENSYSTEM hardware for data acquisition and SENSOFT software for data management and display. Worldwide, our products are successfully used for both on-line production quality inspection and off-line laboratory measurements in various high-end market segments including fine bare wires, magnet wires, precision cables, extruded monofilaments and optical fibers.
PROFILE SENSOR PLD , PSL , PSM and PSD
SENSYSTEM COMPACT, STANDARD and PROCESS
MARCH 2012 • SENSOPTIC SA • 6616 LOSONE • SWITZERLAND • [email protected] • WWW.SENSOPTIC.CH
AUTOMATIC QUALITY CONTROL SYSTEMS
Features • Portable system for both on-line and off-line monitoring applications
• Continuous non-contact measurement of wire surface and local defects
• Precision characterisation of lumps, neck-downs, blisters and scratches
• Reliable user-friendly SENSOFT software with real-time data display
• Directly integrated in the production line with Ethernet communication
• PROFILE SENSORS available for single-axis and dual-axis measurements
• Diameters from 0.02 mm to 2.0 mm and line speeds up to 1500 m/min
• Square and rectangular wire profiles with up to 3.0 mm side length
Benefits • Automatic quality certification of manufactured spools before delivery
• Quality control and inspection of purchased spools prior to processing
• Overall improvement of manufacturing process and production yield
• Reduction of costs by minimizing return of goods from customers
• Improvement of filament uniformity ensuring consistent high quality
MARCH 2012 • SENSOPTIC SA • 6616 LOSONE • SWITZERLAND • [email protected] • WWW.SENSOPTIC.CH
QUALITY CONTROL SOLUTIONS FOR WIRE PRODUCTION
DISCOVER DEFECTS BEFORE THEY REACH THE MARKET!
lumps · neck-downs · blisters · inclusions · scratches · flaws · insulation breaks
MARCH 2012 • SENSOPTIC SA • 6616 LOSONE • SWITZERLAND • [email protected] • WWW.SENSOPTIC.CH
PROFILE SENSOR
Advanced miniaturized optoelectronic
components combined with analogue signal
processing for ultra fast online inspection of
surface faults and short diameter irregularities.
• Photometric measurement
• Continuous IR-LED beams, no laser
• Diameters from 0.01 mm to 3.0 mm
• Line speeds up to 1000m/min
• Real time analogue output signals
• Detection of micrometric defects
• Compact and rugged construction
• Reliable and user friendly
• Optional roller bearing guides
• Not sensitive to wire vibration
• Not sensitive to external light
• No moving parts, low maintenance
• Very low power consumption
SENSYSTEM All hardware for fast data acquisition is
contained in SENSYSTEM units, with input
connections to PROFILE SENSORS and
output USB connection to the PC.
• Hardware for fast data acquisition
• USB 2.0 High speed PC interconnection
• Digital In- and Outputs with opto-coupler
• Integrated PROFILE SENSOR power supply
• COMPACT to connect up to 2 sensors
• STANDARD to connect up to 8 sensors
• PROCESS to connect up to 16 sensors
COMPACT STANDARD
PROCESS
PSD
PSL
PLD
MARCH 2012 • SENSOPTIC SA • 6616 LOSONE • SWITZERLAND • [email protected] • WWW.SENSOPTIC.CH
SOFTWARE SOLUTIONS SENSOFT is a data acquisition and data visualisation software specially designed for the
SENSYSTEM. It provides a reliable and user-friendly way of managing from a standard
Windows based personal computer the surface quality of wires and filaments in real time.
• Continuous monitoring of quality parameters in real time
• Intelligent detection of faults beyond specified threshold values
• Automatic data recording and data saving for post-processing
• Elaboration and printing of production statistics and quality reports
• Easy to install on standard PC’s with Windows XP or Windows 7
SENSOFT STANDARD • For laboratory and production
• For lines with equal line speeds
• Continuous data visualisation
• Lump and neck-down graphs
• Automatic indication of wire
surface roughness
• Print function to memorize graphs
and histograms as JPG-file
SENSOFT MULTILINE • For production integration
• Up to 8 lines simultaneously
• For lines with different speeds
• Counts faults over threshold values
• Additional filter functions
• Ethernet ODBC connection for
automatic data exchange with
production machines
• Automatic start/stop synchronization
with winder start/stop
MARCH 2012 • SENSOPTIC SA • 6616 LOSONE • SWITZERLAND • [email protected] • WWW.SENSOPTIC.CH
GOOD AND BAD SURFACE QUALITY OF WIRES
The operator inserts in the main menu the nominal diameter, the lump and neck-down
thresholds values and the line speed. A “save” function allows to memorise graphs as
JPG files for documentation. The graphs display the “LU&NE SIGNAL” as a function of
length in meters (blue line for lumps, pink line for neck-downs):
No significant lumps and neck-downs
Low lump and neck-down signal levels: smooth surface
Some lumps in a short section
Smooth surface with random blisters
Many lumps and some neck-downs in a short section
High offset level of lump signal: rough surface with blisters
good quality
regular quality
bad quality
length [m]
length [m]
length [m]
SENSOPTIC S.A. EI PIOPPI 4 SONE TIC.CH [email protected]
MARCH 2012, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
DUAL PROFILE SENSOR PSD 100 FOR WIRES
APPLICATIONS
Ultra-fast inspection of surface faults and diameter irregularities for continuous monitoring
of wires in two planes. Industrial quality control applied to drawing, coating, extrusion,
jacketing and colouring processes running at high line speeds. Precision detection of lumps,
neck-downs, blisters, flaws, scratches, coating dropouts, contusions and surface roughness.
FEATURES AND BENEFITS x optical measurement in two planes
x continuous IR-LED light beams
x 100 kHz ultra fast response
x micrometric resolution
x continuous real time monitoring
x analogue output signals
x integrated signal processing
x compact and rugged construction
x precision roller bearing guides
x build-in air insert for dust protection
x reliable and user-friendly
INNOVATIVE CONCEPT Advanced miniaturised optoelectronic components combined with fast analogue signal
processing offer a new dimension in surface fault visualisation. Even at line speeds of
1000 m/min, the Profile Sensor allows accurate measurement and characterisation of
micrometric defects in real time. Thanks to its unique build-in compressed air insert, the
measurements are insensitive to dust and small debris from the manufacturing process.
• VIA D • 6616 LO • SWITZERLAND • WWW.SENSOP • INF
SENSOPTIC S.A. EI PIOPPI 4 SONE TIC.CH [email protected]
MARCH 2012, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
DETECTION SPECIFICATIONS
Diameter measuring ranges: 0.10 mm to 0.40 mm
(other ranges available upon request)
Active measuring zone: 1 mm x 1 mm square
Sensitivity at 1000 m/min:
For a fault length of 0.10 mm: minimum fault height change of 6 µm
For a fault length of 0.25 mm: minimum fault height change of 3 µm
ELECTRONICAL SPECIFICATIONS
DC output signals, bandwidth: 0 to 10 V , DC to 100 kHz
AC output signals, bandwidth: r 10 V , 2 Hz to 100 kHz
Lump and neckdown output signals: 0 to 10 V
Supply voltage, power consumption: 18 to 36 V DC , 5 W
• VIA D • 6616 LO • SWITZERLAND • WWW.SENSOP • INF
MECHANICAL SPECIFICATIONS
Housing dimensions (without wire guides): 115 x 115 x 25 mm3
Roller wire-guides: 4 high-speed precision bearings
Dust protection: build-in compressed air insert
Housing and wire-guides material: black anodised aluminium
Net weight: 700 g
PROFILE SENSOR PSL 40 FOR FAULT DETECTION
APPLICATIONS
Ultra fast inspection of surface faults and short diameter irregularities for on-line monitoring
of wires in one or two planes. Industrial quality control applied to drawing, coating,
extrusion, jacketing and colouring processes running at high line speeds. Precision detection
of lumps, neck-downs, blisters, flaws, scratches, bumps, contusions and surface roughness.
FEATURES AND BENEFITS
• diameters from 0.4 mm to 3.0 mm
• optical non-contact measurement
• continuous infrared LED light beam
• detection in one or two planes
• line speeds up to 400 m/min
• detection of micrometric defects
• continuous real-time monitoring
• compact and rugged construction
• reliable and user-friendly
• precision roller bearing guides
INNOVATIVE CONCEPT
Advanced miniaturised optoelectronic components combined with fast analogue signal
processing offer a new dimension in surface fault visualisation. Even at line speeds of
400 m/min, the Profile Sensor PSL 40 allows accurate detection and characterisation of
small defects in real time.
SENSOPTIC S.A. • VIA DEI PIOPPI 4 • 6616 LOSONE • SWITZERLAND • WWW.SENSOPTIC.CH • [email protected]
MARCH 2012, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
DETECTION SPECIFICATIONS
Small diameter measuring range: 0.4 mm to 1.5 mm
Small diameter measuring field: 5 mm
Large diameter measuring range: 1.5 mm to 3.0 mm
Large diameter measuring field: 10 mm
Sensitivities at 400 m/min:
For a fault length of 1.0 mm 10 µm for small range
20 µm for large range
ELECTRONICAL SPECIFICATIONS
Analogue output signals, bandwidth: 0 to 10 V , DC to 40 kHz
Supply voltage, power consumption: 24 V DC , 3 W
MECHANICAL SPECIFICATIONS
Housing dimensions (without wire guides): 170 x 80 x 40 mm3
Housing and wire-guides material: black anodised aluminium
Net weight: 1.2 kg
SENSOPTIC S.A. • VIA DEI PIOPPI 4 • 6616 LOSONE • SWITZERLAND • WWW.SENSOPTIC.CH • [email protected]
MARCH 2012, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE