SEDIMENTATION | FILTRATION | MIXINGGharpure Engineers, Vasai Virar Mahanagar Palika 58.6 m Dia...
Transcript of SEDIMENTATION | FILTRATION | MIXINGGharpure Engineers, Vasai Virar Mahanagar Palika 58.6 m Dia...
SEDIMENTATION | FILTRATION | MIXING
Process Equipment Manufacturers
ISO 9001:2015 Certified Company
CAPABILITY
INTRODUCTION
INDOFAB INDUSTRIES is well-known for the supply of quality process equipment for past 35 years. The company has its expertise
in the Mid-Sized to Heavy Equipment Manufacturing working with top notch EPC contractors and consultants for serving large size
project requirements for Government and Private organisations. The company also houses an impressively equipped Engineering
department capable of 3D modelling and Analysis as well as fully-staffed Sales, Production and Customer Service teams.
Manufacturing capabilities of the company are summarised as below:
MANUFACTURING
With central manufacturing facilities of 32000
sq.ft. & total manufacturing facilities over 40500
sq. ft INDOFAB undertakes process equipment
manufacturing for diverse industries in field of solid-liquid
separation. The company can perform a wide variety of
operations in-house due to Broad Range of Inhouse
Capabilites as :
WORKING AREA
Total area available at Mira road premises is 32000
Sq.Ft. Out of which working area of 26000 Sq.ft is
covered with fully equipped shed (having center height 12M &
8M) and rest open for storage of raw materials and semi-
finished goods. Navi Mumbai works 8500 Sq.ft
EOT CRANES
The working area is fully equipped with 9 EOT
cranes for material handling with maximum
capacity upto 15 tons.
FOUNDRY
We also have an associate foundry with capacity
upto 20 to 25 tons /month of castings and single
piece castings upto 2.0 tons. and a strong network of pre-
approved foundries for customized material castings.
15.T
PATTERN SHOP
With thousands of patterns made against various
orders since last 35 years they are tagged with
equipment and part no. This helps us cater the spare part
requirements of clients for years. Pattern Design to actually
produce an engineered product/model is one of the key
strengths of company.
FRP & RUBBER LINING FACILITY
We are capable of taking manufacturing of FRP
lined specially built Process Equipments for very
harsh environments, this lining is carried out inhouse with
specially skilled labours. We also undertake Manufacturing of
specially Rubber lined Process Equipments which is
accomplished with few of the reputed lining vendors.
REGISTRATIONS
ISO 9001: 20 15
MSMED
NSIC & FACTORY ACT REGISTERED UNITS
POLLUTION CONTROL BOARD
OFFICE
3500 sq.ft 2 storey building with fully integrated
Admin, Design, Engineering, Procurement and
Quality Control divisions. The office also encompasses a vast
technical library for references & design support.
ENGINEERING SUPPORT
Engineering resources allow for seamless
integration of your designs into our manufacturing
processes. These resources include:
Ÿ Industry Experienced Professional Engineers.
Ÿ 3D modelling, Visualization, Engineered Detailing, Pilot
Study.
Ÿ Structural Engineering & Analytical Analysis.
Equipment can be designed in house from concept through
design, modelling and prototyping.
SOFTWARES (x08 Work Stations)
Ÿ AUTOCAD 2014 / 16
Ÿ AUTODESK INVENTOR 15
Ÿ SOLIDWORKS 2014 / 15
POWER
Ÿ Total connected load of 150 HP
INDOFAB INDUSTRIES, MIRA ROAD
LATHES (x17)
Ÿ WARD HAGGAS & SMITH LTD KEIGHLEY ENGLAND
CENTRE. HT. = 2 M, BETWEEN. CEN. = 2 M CHUCK 2M
PRECISION LATHE WITH GRINDING ATTACHMENT
Ÿ DIVAMAG CENTRE. HT. = 420 MM, BETWN. CEN. = 9000 MM
MACHINERY LIST
MILLS (x02)
Ÿ BHAMBAR LG. TRAVEL = 750 MM, BED WIDTH = 300 MM
Ÿ G.DUFOUR B24B MONTREUIL FRANCE LG. TRAVEL = 1000
MM, BED WIDTH = 350 MM
BORING (x02)
Ÿ GRAFFENSTADEN SPINDLE = 70 MM, TABLE = 1000 X 800
Ÿ SPINDLE = 50 MM, TABLE = 1260 X 600 MM
DRILLING (x06)
Ÿ MEW25/230 MAKAWANA ENGINEERING WORKS LIFT HT. =
540 MM, CAPACITY = 75 MM
Ÿ KOVOSVIT MAS LIFT HT. = 650 MM, RADIAL ARM = 1250
MM, CAPACITY = 75 MM
PLATE ROLLING (x03)
Ÿ CAPACITY = 28 MM, WIDTH = 2400 MM
Ÿ CAPACITY = 12 MM, TOTAL WIDTH = 1250 MM
WELDING MACHINES
Ÿ SPOT WELDING (x01)
Ÿ ARC WELDING (x10)
Ÿ TIG (x04)
PRESSES (x01)
Ÿ · STROKE = 100 MM, BASE = 250 X 250 MM BED GAP = 840
MM, STROKE = 250 MM, CAPACITY = 20 TON
BAND SAW (x01) & HACK SAW (x01)
Ÿ CAPACITY = 254 MM
SHAPPING (x01)
Ÿ STROKE = 370 MM, BED GAP = 900 MM
SLOTTING (x02)
Ÿ STROKE = 400MM, TABLE DIA = 1500 MM, EXTENDED TO 10
FT. DIA. GEARS
QUALITY
INSTRUMENTS
Ÿ Manual & Digital type Vernier Calliper's of Size 6”, 12”, 24” & 36” (x18)
Ÿ Height Gauge up to 24” (x02)
Ÿ Inside Micrometer up to 60” (x06)
Ÿ Outside Micrometer up to 36” (x08)
Ÿ Hardness Testing Facility (x01)
Ÿ Non-Contact type Tachometer (for Recording RPM) (x01)
Ÿ Slip Guages (x01)
Ÿ Feeler Guages (x02)
Ÿ Gear tooth Vernier (x01)
Ÿ Radius Guages (x01)
Ÿ Non-Contact type Infra-red Temperature Indicator. (x01)
Ÿ Electronic Multi-meter (x01)
Ÿ Bore Gauge up to 200 mm (x01)
Ÿ DFT Meter for Paint Thickness (Microprocessor based) (x01)
Ÿ Sound Measuring Meter (Audi meter) (x01)
Ÿ Vibration Measuring Instrument (Vibrometer) (x01)
NOTE:
Ÿ Our Engineers are ASNT NDT Level II qualified.
Ÿ Our Welders are qualified as per ASME Sec. IX and are regularly subjected
to witness Testing and Certification from reputed Third Party Agencies.
Ÿ A tabulated record of all such WPS, PQR & WPQ are maintained at our end.
Ÿ Presently we have qualified Welders for IS2062 Gr. A/B, SA 36, SA 516/517
Gr. 60/70, SS202, SS304/L, SS316/L, SS409, SS410, SS430 & SS310/L. We
do not undertake Work with Exotic Metals
SMAW & TIG WELDING
OUR RECENT PROJECTS
Tarapur Environmental Protection Society30 m. Dia Thickener, for 50 MLD Plant, CETP
Urban Development Department, Kolkata48 m Clarifier for STP
Satia Paper, Punjab18 m High Rate Solid Contact Clarifier for WWTP
Tata Projects Limited, Riico22.5 m Dia Sludge Thickener Application
Urban Development Department, Kolkata50 m Dia Trickling Filter for STP
Thermax, Hinduja Power Plant BHEL project, Vishakapatnam, 40 m HRSCC for Desalination
Thermax, Hinduja Power Plant BHEL project, Vishakapatnam, 40 m HRSCC for Desalination
Global Coal & Mining Pvt Ltd. Metso Westech10 ft x 14 ft Belt Discharge Drum Filter for Coal Benefication
OUR RECENT PROJECTS
Ion Exchange India Ltd. Welspun, Anjar9.4 sq.m detritor for STP
Ion Exchange India Ltd. Welspun, Anjar21.5 m dia thickener for STP
Ion Exchange India Ltd. Welspun, Anjar42 m dia clarifier for STP
Gharpure Engineers, Vasai Virar Mahanagar Palika 58.6 m Dia Clariflocculator for WTP
Mohit Paper Mills Ltd, Bijnor Uttar PradeshDrivehead with Lifting device ReCaustisizing Plant
Ion Exchange India Ltd. Welspun, AnjarA3 Drivehead for STP
www.indofab.com
FEW OF ESTEEMED OUR CLIENTS
GGC
BATLIBOI
CTCI
TEST FACILITES
Ÿ Test Area for Agitator Trial runs up to 6M Ht.
Ÿ All Testing arrangements necessary for Dry Testing of Process
Equipments like Drum Filters, Disc Filters, Lime Slakers, Drum Slakers etc.
Ÿ Test Circuit arrangement for Wet trials of Pumps.
Ÿ Level Surface Tables.
Ÿ Vacuum Test Rig.
Ÿ Hydraulic Hand Pumps up to 10000 PSI
Ÿ Pneumatic Test Rig with Compressor up to 10 Kg/cm2
Ÿ Test Rigs for Standard sizes of Drive Heads, Turn Tables & Centre
Mechanisms.
Ÿ Go & No-Go Gauges for Standard Bearing Sizes.
Ÿ Knife Edge Rollers Arrangement for Static Balancing of Shafts & Impellors.
*All Instruments are Timely Calibrated from NABL Accredited Laboratories.
Ÿ Metallurgical Services.
NABL Accredited Testing Laboratory
Ghakopar, Mumbai.
Ÿ Sohm Analytical Services.
NABL Accredited Testing Laboratory.
Thane.
ASSOCIATED MATERIAL TESTING LABORATORIES:
Ÿ For All types of Chemical, Physical, Radiographic, Destructive
& Non-Destructive Testing)
IN HOUSE PRE-TESTING FOR PROCESS
EQUIPMENT IS AVAILABLE FOR
Ÿ Filtration test leaf test for vacuum filters, belt filters, HBF, pan
filters.
Ÿ Pilot scale RVDF in SS316 available for site test work.
Ÿ Pilot scale cyclone separator for solid-liquid separation site
test work.
Ÿ Sedimentation / settling test apparatus available for odd slurry
tests.
Ÿ Abrasion/erosion/application based MOC test work carried
out on request.
INSPECTION AGENCIES
IMPACT TESTBEND TEST
HARDNESS TESTTENSILE TEST
www.indofab.com
SEDIMENTATION | FILTRATION | MIXING
Process Equipment Manufacturers
ISO 9001:2015 Certified Company
SEDIMENTATION
SEDIMENTATION | FILTRATION | MIXING
Process Equipment Manufacturers
ISO 9001:2015 Certified Company
IMPORT SUBSTITUTES
& OEM SPARES
www.indofab.com
Office & Factory: C/3-4-5 Hatkesh Udyog Nagar,Kashimira Bhayander Road, Post: Mira, Dist. Thane. Maharashtra INDIA. 401107
Tel : 91-22-28111326 / 28113414 Fax:91-22-28111850 Email: [email protected] & [email protected]
SEDIMENTATION | FILTRATION | MIXING
Process Equipment Manufacturers
AERATOR
ISO 9001:2015 Certified Company
SEDIMENTATION | FILTRATION | MIXING
Process Equipment Manufacturers
ISO 9001:2015 Certified Company
DRIVE HEAD
SEDIMENTATION | FILTRATION | MIXING
Process Equipment Manufacturers
DRUM FILTER
ISO 9001:2015 Certified Company
SEDIMENTATION | FILTRATION | MIXING
Process Equipment Manufacturers
LIME SLAKER
ISO 9001:2015 Certified Company