1

ScanZen Installation Guide

How to Set up ScanZen

Here’s an easy to follow guide to get you quickly set up with your ScanZen Eko series scanner.

1. Checking the Components

2. Removing the Protective Packaging

3. System Requirements

4. Installing the Driver

5. Connecting the ScanZen

6. Installing the Software

7. Scan Test

2

Scanner

Paper Chute

AC Outlet

AC Adapter

1. Checking the Components

Make sure that all items shown below are included in the package.

3

USB Cable

Welcome to ScanZen Card

Remove the protective packaging and tape.

1. Download & Install Drivers 3. Select Application

4. Scan & Achieve Zen!

Instal lat ion instructions, users guides, softwareand warranty registrat ion are al l avai lable onl ine.

©

2. Plug in your scanner

Please plant this seeded postcard to grow a garden of flowers and

give back to the Earth!

* C G 0 0 0 0 2 - 2 9 7 2 0 1 *

Ph: 844-686-8448Email : teamjoi@scanzen.comWebsite: www.scanzen.com

©

2. Removing the Protective Packaging

Follow the procedure below to carefully remove the protective packaging before using the scanner.

1

4

Remove the protective packaging and tape.

Remove the protective packaging and tape.

Attach the ADF paper chute.

2

3

4

5

3. System Requirements

Make sure that your computer satisfies the following system requirements.

Hardware

Operating System

Windows® 10 (32-bit/64-bit)

Windows® 8.1 (32-bit/64-bit)

Windows® 7 (32-bit/64-bit)

l

l

l

Recommendations

4 GB or more

1024 x 768 pixels or more

7200 rpm or faster

Memory

Display

Hard disk drive

CPU Intel® Core™ i5 2.5 GHz or higher,except for mobile

Intel® Pentium® 4 1.8 GHz

Requirements

1 GB

5400 rpm

6

4. Installing the Driver

Follow the steps below to install the driver for ScanZen onto your computer.

1 If you have an administrator on a shared network, be sure you log into Windows® as a user with administrator privileges.

3

2

4

5

Quit any other applications that are running on your computer.

Follow the instructions from the Installation Wizard to complete the installation.

Download the following file onto your hard drive.

Run the file that you downloaded in step 2. This creates a folder named “Disk1” in the same folder where the program is stored. Installation starts automatically after self-extraction. If it doesn’t start, double-click “Setup.exe” which is located in the Disk1 folder.

PaperStream IP (TWAIN) for ScanZen 1.54.0.xxxx

PSIPTWAIN-SZ-1_54_0c.exe (xx,xxx,xxx Bytes)

7

5. Connecting the ScanZen

Connect the cables in the following order.

ON

Hold for at least 2 seconds

8

6. Installing the Software

Follow the steps below to install the software.

The following software can be installed:

PaperStream Capture Lite

Presto!™ PageManager™

ABBYY™ FineReader™ Sprint

l

l

l

Read the end-user license agreement shown below and select the [I agree to the terms and conditions above] checkbox.

1

Download the following file onto your hard drive.3

Be sure you log into Windows® as a user with administrator privileges.2

When the file download is completed, run the file.4

Follow the instructions on the window.5

END-USER LICENSE AGREEMENT

This End-User License Agreement (“EULA”) is a legal agreement between the user of this software (“You”) and PFU Limited (“PFU”) for governing the use of the PFU software to be used with PFU fi Series scanner product (“Product”). The PFU software includes the Software download tool(“Software”).

I agree to the terms and conditions above. (Necessary)

Software Download Tool 1.0.11

SoftwareDownloadTool.exe (17.5 MB)

9

7. Scan Test

Using PaperStream Capture Lite and PaperStream IP (TWAIN) driver, scan a document with the following procedure to see if a scan can be performed properly.

1 2

3

LitePaperStreamCapture Lite

PaperStream Capture Lite

Place paper upside down and face down.

10

4 5