SBI INFRA MANAGEMENT SOLUTIONS PVT. LTD. · TO BE CARRIED OUT FOR STATE BANK OF INDIA , SBI INFRA...

PART – B: PRICE BID

TENDER SUBMITTED BY:

NAME :

ADDRESS :

GSTIN NO. :

DATE :

ARCHITECT

M/s. SARAYAN TURNKEY SOLUTIONS

ARCHITECTS INTERIOR CONSTRUCTION

703, D'souza Mansion, J.S. Road,

Dahisar- West, Mumbai- 400 068.

Tel.:- 28944423 / 28956520

E-Mail -

[email protected]

[email protected]

Mobile:- 9320790825 / 8169250611

GROUND FLOOR,GLOBAL IT CENTRE, D-WING.CBD BELAPUR, NAVI MUMBAI - 400614

TO BE CARRIED OUT FOR STATE BANK OF INDIA ,

SBI INFRA MANAGEMENT SOLUTIONS PVT. LTD.

PROPOSED INTERIOR CIVIL AND FURNISHING WORKS

(A WhollyOwnedSubsidiary Of SBI)

(SBI GITC Circle office )

CBD BELAPUR, NAVI MUMBAI - 400614

STATE BANK OF INDIA , First Floor, State Bank Global IT Center, Plot no.8, 9, 10, Sector 11,

STATE BANK OF INDIA , D-WING,GROUND FLOOR, GLOBAL, IT CENTRE,CBD BELAPUR, NAVI MUMBAI - 400614 2

SNo PARTICULARS QNTY UNIT RATE AMOUNT

A DISMANTLING WORKS

1 Remove carefully the existng brick masonary with plaster of

any thickness including sorting out serviceable bricks and

stacking the same and carting away the debris separately upto

the permissible distance within or outside City limits as

applicable Or as per Statutory permissions or spreading the

debris etc. complete. and as directed by the Architect /

Engineer.

2 Removing the old flooring or any type of tiled flooringincluding bedding material and levelling the surface,cleaning the site including sorting out serviceable tiles andstacking the same separately and carting away of debrisupto the permissible distance within or outside City limits asapplicable Or as per Statutory permissions or and asdirected by the Architect / Engineer.

3 Dismantling of Tile or stone or any form of dado, skirtingwith the cement backing and disposal of unserviceablematerial as directed by the Architect / Engineer.

4 Removing the existing cement plaster of any thicknesswithout causing dust nuisance and and carting away thedebris upto the permissible distance within or outside Citylimits as applicable Or as per Statutory permissions andcleaning the site etc. complete.

5 Dismantling of all false ceiling or accoustical cladding underthe slabs, boarding at all the levels including all necessaryscaffolding and carting away of all the waste materialsoutside the site within or outside City limits as applicable Oras per Statutory permissions complete in all respects. or asdirected by the Architect. The ceiling surface shall be cleanand even and free of all the fixed fittings, screws, nails,hooks etc. fixed to the ceiling and the holes thus formedshall be filled with cement etc. and free of all stains, marksetc.

6 Dismantling of partitions and other miscellaneous furnitureitems and carting away the debris to the permissibledistance within or outside City limits as applicable Or as perStatutory permissions complete in all respects.

7 Dismantling of existing door frames and shutters (single ordouble shuttered of any type), fixed glazing and stacking ofserviceable material and disposal of unserviceable materialto nearest municipal dumping ground.

8 Dismantling of existing counters etc. complete with includingthe supports embedded in the wall, if any and stacking ofserviceable material and disposal of unserviceable materialto nearest municipal dumping ground.

9 Dismantling of the items as mentioned from item no. 1-8and disconnection of services viz electrical, AC, plumbingetc. complete in all respects stacking of serviceable materialand disposal of unserviceable material to nearest municipaldumping ground. The transportation as applicable and all thenecessary charges to be inlcuded and consolidated rateneeds to be provided.

1 L/s

Rebate (Base Price Rs.

50,000.00*)

TOTAL REBATE FOR DISMANTLING AND CARTING

AWAY THE MATERIAL

* Contractor has to quote compulsorily above the base price i.e. Rs. 50,000.00 .

Signature of Contractor with Seal


B CIVIL WORKS

1 VITRIFIED FLOORING DOUBLE CHARGE / POLISHED

• Providing and laying vitrified mirror finish decorative type

tiles of size 600 mm x 600 mm, thickness to match

manufacturers specifications of approved make, shade and

pattern having water absorption between 0.08% to 2.5% for

flooring in required position laid on a bed of 1:4 cementmortar including neat cement float, filling joints with cementslurry, curing and cleaning etc. complete in all respects asdirected by the Architect. Prior approval for the tile to betaken from the Bank and Architect.

complete the works in all respects as per the design,direction and upto the complete satisfaction of the Architect/ Engineer. The rate shall be inclusive of providing andlaying 50 mm to 75 mm thk in situ plain cement concreteM15 Grade of trap metal for foundation and and beddingcompacting and curing.

(Basic cost of vitrified tile flooring is Rs.800/ sq. mt. )400.00 SMT

2 VITRIFIED FLOORING DOUBLE CHARGE INLAY WORK

Do as above Item No 1Providing and laying vitrified mirror

finish decorative type tiles with inlay work . The rate shall

include the 3-5mm thick PVC spacers between the tiles and

filled with laticrete epoxy grout etc as per manufacturers

specifications etc and as per Architect/Bank's engineer

instructions.

(Basic cost of vitrified tile flooring is Rs.800/ sq. mt. )50.00 SMT

TOTAL FOR CIVIL WORKS

C CARPENTRY WORKS

1 PARTITIONProviding and fixing in position full height solid partition inposition as indicated in the drawing excluding the door. Theframe of partition to be made of aluminium hollow sections of50 mm x 50 mm size 1.5mm thick of JINDAL, INDAL orequivalent make as internal frame structure placedhorizontally & vertically in 600mm x 600mm center to centeror as directed by the Architect. The alternate and cornervertical members of the partition shall be taken upto theceiling level (payment shall be made for the partitionmeasured upto below the false ceiling level) and the sameshall be anchored to the ceiling



securely with the help of suitable cleats. The frameworkshall be covered with 12 mm thick BWR ply conforming IS303 standards and of approved make on both sides finishedas per folllowing specifications.The necessary openings inthe partitions shall be provided for A.C. Grill, ElectricalConduits, Electrical Switches, Light Fixtures, A.C. Opening,Running display Speaker, Fire Detectors, Electric Fixturesetc. complete as per site requirements and instructions ofthe Architect / Engineer.

The height of the partitions upto soffit of false ceiling andlaminate finish top shall be considered for payment. Thealternate and corner vertical members of the partition shallbe fixed with necessary brackets /supports to RCCmembers. The framework above the false ceiling shall not beconsidered for payment.

10 SMT

2 LOW HEIGHT SOLID PARTITION Providing and fixing in

position Low height solid partition in position as indicatedin the drawing the frame to be made out of aluminiumhollow sections of 50 mm x 50 mm size 1.5mm thick ofJINDAL, INDAL or equivalent make as internal framestructure placed horizontally & vertically in 600mm x 600mmcenter to center or as directed by the Architect / Engineer.

The framework shall be covered with 12 mm thick BWR plyconforming IS 303 standards and of approved make on bothsides and finished with 1.0 mm thick laminate of approvedshade and make on both sides.

10 SMT

3 12MM THK TOUGHENED GLASS INTERNAL PARTITION

Providing and fixing Internal 12 mm thk toughened glass

partition in position as indicated in the drawings. The glassshall be fixed securely with SS/ Alloy U channel of approvedmake at bottom of the floor and inside the ceiling as permanufacturer's specifications and to the Architect'ssatisfaction.

Any damage to the newly laid flooring shall be reinstatedand complete in all respects. The partition shall include theprovision of the necessary cut-outs if required forcommunication or as directed by the Architect or Client andthe edges of the same shall be mirror polished along alledges. (The rate is not inclusive of the glass doors.)

120 SMT

4 PANELLING - COLUMN / WALL PANELING - LAMINATE

FINISH WITH GROOVESProviding and fixing column panelling made out of aluminumhollow section of 50mm x 25mm size 1.5mm thick of JINDAL/ INDAL as internal frame structure placed horizontally &vertically in 600mm x 600mm center to center or asdirected by the Architect. The framework shall be fixed with12 mm thick plywood BWR IS 303 GRADE conforming to ISstandards so as to form a groove of 12 mm x 12 mm x 18mm in ht. as indicated in the detailed drawing.

40 SMT

The panelling and the groove formed shall be finished with1.0 Laminate of approved shade and colour all complete asper instructions of Architect. The item also includesscaffolding for maximum height upto 4.0 m from floor level.



5 COLUMN PANELLING - ACP CLADDING FINISH

Providing and fixing column panelling made out of aluminumhollow section of 50 mm x 25 mm size 1.5 mm thick ofJINDAL / INDAL as internal frame structure placedhorizontally & vertically in 600mm x 600mm center to centeror as directed by the Architect. The framework shall befinished with 12 mm thick plywood BWR IS 303 GRADEconforming to IS standards and finish with 3-4 mm thk. ACPcladding of approved shade in a pattern or design assuggested and designed by the Architect.

60 SMT

6 COLUMN PANELLING - VENEER FINISH Providing and fixing column panelling made out of aluminumhollow section of 50 mm x 25 mm size 1.5mm thick ofJINDAL / INDAL as internal frame structure placedhorizontally & vertically in 600mm x 600mm center tocenter or as directed by the Architect.

55 SMT

The framework shall be finished with 12 mm thick plywoodBWR IS 303 GRADE conforming to IS standards andfinished with 4.0 mm thk. veneer of approved shade anddesign in a pattern or design as suggested and designed bythe Architect and finished with melamine polish. Basic rate ofveneer - Rs. 100/sq.ft.

7 STORAGES

LOW HEIGHT STORAGES - LAMINATE FINISH

Providing and fixing storage cabinet 1200 mm high made outof 19mm thick PLY BWR 303 grade plywood conforming ISStandards plywood of approved make including the fixing ofshelves at 400 mm to 450 c/c and the shutters shall be in 19mm thick PLY and back covered with 19 mm plywood. Thetop edge shall be GRANITE finish with full round edgepolish of the approved make and shade with the provision ofnecessary grooves between the top edge and shuttersbelow.

The shutters shall be fixed with S type L hinges of approvedmake so as to get an equal 8 mm groove between all theshutters at the opening and hinged end of every shutter asper the detailed drawing. The shutter shall be fixed with SSchain from inside so as to open the shutter less than 90degree and to avoid the breaking of laminate at the hingedend.

The shutter shall be finished externally with approved quality 1.0 mm thk. laminate of approved shade and make andinternally would be finished with 0.8 mm thk. balancing whiteor off-white laminate. The rate shall be inclusive of provisionof SS "D"type handles 4" or 6" as approved, Godrej orVijayan locks with 3 keys and all the necessary hardware,fixtures, fittings etc complete in all respects as directed bythe Bank and Architect ( Basic cost of Granite is Rs. 200/-per sft for Storage Top)

40 SMT



DOORS

8 FLUSH DOOR FINISHED WITH LAMINATE ON BOTH

SIDESProviding and fixing of Flush Doors with vision panel of size

upto 900 mm x 2100 mm as per drawing complete ofthickness 30 mm to 36 mm raw size confirming to ISstandards together with the frame made out of CPTWsection 100 x 75 and finished with Melamine polish (3 coats)or as directed by the Architect/engineer. The shutter shall befinished with 1.0 mm thk. laminate along both sides ofapproved shade and design.

3 SMT

The shutter shall be lipped with 12 mm thk. t w beadingalong the edges. The rate shall be inclusive of the hardware,fittings, fixtures etc. in heavy duty SS such as lock of 6 leverof Godrej or Doorset make with SS mortise handle ofapproved make and model.

The rate shall be inclusive of concealed door closers, SSheavy duty hinges, tower bolts, SS foot operated doorstopper, SS buffer along the back side and any other relatedhardware , fittings, fixtures etc. required to complete.Theitem shall include the polishing of the edges and frames inMelamine polish or as approved by the Architect/bank

9 GLAZED DOOR 1800 mm x 2100 mm (MAIN ENTRANCE)

- Providing and fixing of fully glazed frameless doubleshuttered glazed door made out of 12 mm thk. Toughenedglass and the door shall be fixed with Enox or approvedmake floor springs with SS finish patch fittings on top,bottom and lock of Enox or approved make. The door shallhave lock in the center of approved make and 450 mm to600 mm long SS handle of 25 mm dia. to be fittedhorizontally/ vertically as per instructions of the Architect.

5 SMT

The rate shall be including the making of necessary holes inthe glass for Access control locks, complete with all respectwith all hardware, fittings, fixtures etc. complete in allrespects.

10 GLAZED DOOR 900 mm x 2100 mm- Providing and fixingof fully glazed frameless glazed door made out of 12 mmthk. Toughened glass and the door shall be fixed with Enoxor approved make floor springs with SS finish patch fittingson top, bottom and lock of Enox or approved make. The doorshall have lock in the center of approved make and 450 mmto 600 mm long SS handle of 25 mm dia. to be fittedhorizontally/ vertically as per instructions of the Bank andArchitect.

15 SMT

The rate shall be including the making of necessary holes inthe glass for Access control locks, complete with all respectwith all hardware, fittings, fixtures etc. complete in allrespects.



11 NEW ANODISED ALUMINIUM WINDOW WORKProviding and fixing New Anodised Aluminium work (anodised transparent or dyed to required shade according toIS : 1868, minimum coating of grade AC15) in shutters fordoors, windows, ventilators and partition with extruded builtup standard tubular sections/ appropriate Z sections andother sections of approved make conforming to IS:733 andIS :1285,fixing with float glass panels of 5.5mm /6mmthickness fixed with rawl plugs and screws or with fixingclips or with expansion hold fasteners including necessaryfilling up of gaps at junctions, at top, bottom and sides withrequired PVC/Neoprene felt etc.

Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherver required includingcleat angle, aluminium snap beading for glazing / panelling,C.P. brass / stainless steel screws, all complete as per site

requirement (Basic Rate of Granite = Rs 200/-per sft).

Thickness of Granite 19mm +-2mm ( 12" or 6 " wide

Double Step )

60 SMT

12 Roller BlindsProviding and fixing of Roller blinds of Vista/Mac orequivalent make or as approved by the Consultant orEngineer-in- charge. The Roller blinds shall be of Highstrength ribbed extruded Aluminium Section, 45mm high x32mm wide X 1.3mm thick, powder coated for smooth paintfinish and corrosion resistance.TILT ROD : Made of extrudedAluminium having 3 keyways . Fixed to the End Control Unit,it rotates Louvers with minimum torsionaldeflection,RUNNERS : Made of moulded plastic, havingtongued polycon stem to hold Louvers. It facilitates frictionless 180 rotation of Louvers.

SPACERS : Made of moulded Derlin, it helps in properspacing of runners, thereby ensuring proper overlapping ofLouvers resulting in perfect light control.,TRANSVERSECORD : High strength polyester fibre cord of 2.2 mmdiameter. It helps to stack the Lovers.,TILTER CHAIN :2.0mm polyester cord having 4.5mm ABS plastic beads. Ithelps in trouble free rotation of Louvers by 180.,CORDWEIGHT : It is made of ABS plastic 110mm long with a Steel Weight inside. It helps in keeping the transverse cordstraight.,BOTTOM WEIGHT. It is made of power coatedgalvanized Steel Sheet 1.8mm thick. It adds weight

60 SMT

TABLES

Supply & installation of Work station with low height partition in 12mm toughned glass partition above table top of 1' 6''height on visitor side. Table tops shall be made of 25mmthk Pre-laminated exterior grade particle boards finished with1 mm of suede finish conforming to IS : 12823, InteriorGrade with 2 mm thick edgebanding of matching shade tomake it more resisitant towards heat and moisture.



A specially designed powder coated M.S. brackets shall befixed to the partition frame to support the table tops. Tableends shall be made of 25mm thk prelam particle board ofsuede finish with both side laminate (BSL) and connected toframe with help of metal powder coated brackets to supporttable top. Frames :- Partition thickness shall be of 60mm ±10 mm for stability and with the inside gap between two tileis approximately 50mm ± 10 mm for higher wire carryingcapacity.

Frame (Horizontals) shall be made of 1mm thick CRCAsheets & the verticals are made of Aluminium Extrusions of1.5mm thick, All the frames will be duly powder coated upto50-60 dft , which will be inline with the Top trims & end trims,All the Caps viz end, inline & universal & raceway caps aremade out of Die-cast aluminum. The partition must havethree integrated raceway provided one at skirting level andanother two at below & above the work surface level thusensuring separation of power and networking cables.

The free space available within raceway ccommodatespower, data and communication cables. Metal CPU Trolley &Keyboard tray to be considered. BottomTile: Bottom row offrame is of MDF prelam, from both internal and externalsides, made of 6 mm thick MDF board with std color TopTile: frosted glass on partition on back of visitor side. OtherMetal Fabric tile: Constructed out of CRCA, and coveredwith fabric of std color. Soft pin up tile: made out of 0.8 mmthick galvanized iron sheet with 8mm thick cross linked foamand covered with fabric of std color.

The drawer unit consists of 2 box drawer and 1 file Self /drawer. The sides of Inside drawer box are of prelam particleboard. The drawer box is fitted with roller Slide for freemovement. The drawer unit is provided with central lockingsystem, where in the three drawer are locked with one key.recessed handles are provided for easy opening and closingof drawer. The drawer unit is fitted on castors for easymobility.

Edgebanding shall be of Rehau or Dolken of germany makeThe complete furniture unit is factory assembled with knockdown fittings. The pedestal is fitted with additional (5th)castor to avoid toppling in case of opening all the threedrawers. All the hardware & channels are from Hettich/Ebco.( All above table top glass panel to be fixed similler to thework station finished on 4th floor of ground floor "C" wing. )



13 WORKSTATIONS - 1050 x 600 ( Specification as per above

) 86 nos.

14 WORKSTATIONS - 1370 x 600 ( Specification as perabove ) 24 nos.

15 CUBICLE WORKSTATIONS - 1500 X 1500 ( Specification as per above ) 8 nos.

16 PRELAMINATED SLIDING DOOR UNITS)- All Wood EchoStorage (PRELAMINATED SLIDING DOOR UNITS) - 750 Hx 900 W x 450

8 nos.

17 High Back Chair 8 nos.

Seat / Back assembly - The seat is made up of 1.2 +/- 0.1cm thick hot pressed plywood measured as per QA methoddescribed in OCP-QLTA-P14-18and upholstered with leatherand moulded Polyurethane foam. The back foam is designedwith contoured lumber support for extra comfort. The chairneeds to be high back with netted back rest in black colourconforming to standards as per Godrej or equivalent make -high back chair with netted back and castor provision.

High resilience (HR) Polyurethane foam: The HRPolyurethane foam is moulded with density = 45+/-2 kg/cubicmeter and hardness load 16+/- 2kgf as per IS:7888 for 25%compression.

Fixed type mechanism: The Fixed type mechanism is madewith a 0.8+/-0.05 cm thk. HR steel spine welded to it andblack powder coated (DFT 40-60 microns)

Understructure: the understructure is made up of MSERWElliptical tube of size 4.5 +/-0.03 cm x 1.9 +/-0.02cm x 0.25+/-0.025 cm welded to MSERW Tube of dia. 1.6+/-0.02 cm x0.2 +/-0.016cm thk. The under structure is powder coated(DFT 40-60 microns) in silver metallic grey.



19 Mid Back Chair - Same specificatioons as item no. 18 butmid back chair with netted back and provided with castorsconforming to specifications

110 nos.

20 Visitor Chair - Same specifications as item no. 18 but midback chair castors black in colour fixed conforming to

specifications 16 nos.

TOTAL FOR CARPENTRY WORKS

Preferred make of chairs (For item No. 17 to 20): Godrej / Durian / Wipro / Featherlite

Note: The photographs shown are indicative for feeatures may vary for different approved manufacturers.



D POP / FALSE CEILING WORKS

1 INDIA GYPSUM FALSE CEILING Providing and fixing suspended false ceiling, which includesproviding and fixing GI perimeter channels of size 0.55mmthick having one flange of 20mm and another flange of30mm and a web of 27mm along with perimeter of ceiling,screw fixed to brick wall/ partition with the help of nylonsleeves and screws at 610mm centers. The suspending GIintermediate channel of size 45mm, 0.9mm thick with twoflanges of 15mm each from the soffit at 1220mm centerswith ceiling angle of width 25mmx 10mmx 0.55mm thickfixed to soffit with GI cleat and steel expansion fasteners.

125 SMT

Ceiling section of 0.55mm thickness having knurled web of51.5mm and two flanges of 26mm each with lips of 10.5mmare then fixed to the intermediate channel with the help ofconnecting clips and in direction perpendicular to theintermediate channel at 457mm centers. 12.5mm taperededge Gypboard (Conforming to IS- 2095-1982) is thenscrewed fixed to ceiling section with 25mm dry wall screw at230mm centers. Screw fixing is done mechanically.

Finally the boards are to be jointed and finished so as tohave a flush look which includes filling as finishing thetapered and square edge of the boards with joiningcompound, paper tape and two coats of primer suitable forGypboard (as equivalent) extra frame work for electricalfittings, A/C diffusers, and/or any other cut-out, trap doors,wooden shadow battens (hollock wood black enamel painted-25x40mm) at wall peripheries and ends, 12mm thick MDFboard for pelmet etc. complete including opening to be madefor AC grills, light fittings, trap doors etc.

(The quoted rate shall be inclusive of suspenders at allheights).



2 MODULAR CEILING Providing and fixing modular false ceiling of 600 mm x 600mm centre to centre and 18 mm thick square mineral fibreboard to be fixed on frame work of Aluminium sections forsuspended false ceiling consisting of Aluminium T 2" X 11/2" (50 mm X 40 mm) weighing 0.39 kg/m at 60 cms centreto centre and fixed with 1/2" x 1/2" (15 x 15 mm) flangesweighing 0.19 kg/m suspended on 6 mmdia. mild steel rodweighing 0.22 kg/m, fixed on wall and beams includingrounding of the edges with aluminium T of 2" x 1 1/2" (50mm x 40 mm) weighing 0.39 kg/m etc.

400 SMT

(All aluminium sections shall be anodized/powder coated)including all labour, material, lifts etc. complete. Make -Armstrong or equivalent make with silhoutte groove

3 GYPSUM PUNNING Providing and fixing on an average 15mm to 18mm thickgypsum punning over cement plaster on walls, including thelevelling and smooth finishing of the surface including thesand papering the old surface etc. The rates shall beinclusive of scaffolding etc. for any height and for plane aswell as architectural surface in line & plumb finished smoothto receive paint complete in all respects as directed by theArchitect.

440 SMT

The rate shall be icnclusive of 6 mm sgrooves along all thefour sides of window and door frames of granite / marble /wood and along the skirting level and as directed by theArchitect etc. complete in all respects.

TOTAL FOR POP WORKS

E PAINTING WORKS

1 SATIN PAINT FOR WALLS / CEILING - Erecting scaffolding at all levels, preparing the surface by rubbing thesurface by sand papers of different grade, removing all dirt,smoke, grease, loose plaster etc. if any from the existingsurface cleaning the surface thoroughly and removing all thedirt from the surface. Providing and applying three coats ofapproved quality plastic paint over the required number ofcoats of approved cement primer in all internal walls allcomplete including the carrying out of the necessary lambi

work with Birla white putty (2 COATS) as per

manufacturers specificcation and finished in plain, clear andsmooth or rough surface as per the site condition etc.standard specifications and as directed by the Architect withSATIN PAINT of approved manufacturer of approved shade,colur and pattern and design.



The rate shall include the required protection by coveringthe existing furniture by plastic sheet so as to avoid anydamage and keeping the surface intact including completecleaning after completing the painting, removing paintingmarks and making good the same. All complete as directedby the Architect.

a PLASTIC PAINT FOR CEILING - Same specifications asabove but finished with plastic paint 100 SMT

b LUSTER PAINT FOR WALLS - Same specifications asabove but finished with luster paint 200 SMT

c TEXTURE FOR WALLS- Same specifications for the abovebut finished with Texture paint of approved shade as directed by the Architect. 25 SMT

TOTAL FOR PAINTING WORKS

A DISMANTLING WORKS

B CIVIL WORKS

C CARPENTRY WORKS

D POP WORKS

E PAINTING WORKS

Seal of Tenderer

Signature of Tenderer

Name of Tenderer

Contact of Tenderer

GST will be Paid as per actual

SUMMARY (INTERIOR CIVIL & FURNISHING )

TOTAL FOR THE INTERIOR FURNISHING WORKS


SBI INFRA MANAGEMENT SOLUTIONS PVT. LTD. · TO BE CARRIED OUT FOR STATE BANK OF INDIA , SBI INFRA...

Documents

Transcript of SBI INFRA MANAGEMENT SOLUTIONS PVT. LTD. · TO BE CARRIED OUT FOR STATE BANK OF INDIA , SBI INFRA...