SAP BW 7 - a248.g.akamai.neta248.g.akamai.net/n/248/420835/35f8b53e015550d26df7108dea6ff7d7e... ·...
Transcript of SAP BW 7 - a248.g.akamai.neta248.g.akamai.net/n/248/420835/35f8b53e015550d26df7108dea6ff7d7e... ·...
SAP BW 7.x
basis customizing of the SAP BW System
Roland Kramer, Product Management BW/In-Memory
October 2009 April 2012 July 2013 November 2013
February 2016 May 2017
Please Note that the basis settings are valid for all SAP BW Releases (including BPC)
from 7.0x onwards up to SAP BW 7.50 and partially BW/4
© SAP 2007 / Page 2
SAP NetWeaver 7.0 Technology Platform
Mandatory review of SAP and DB Profiles
After the initial Setup (or technical upgrade) of SAP NetWeaver 7.0x there is
only a an initial Configuration Profile available which does not meet efficient
BW/OLAP requirements. So the consulting of the following notes is a mandatory
step before the full and performant usage of the BW applications.
– SAP First Guidance – SAP BW on SAP HANA Installation/Systemcopy/HANA Revisions
contains a Profile Example for BW on HANA
– Note 1044441 - Basis parameterization for NW 7.0 BW systems
– Note 192658 - Setting basis parameters for BW Systems
– Note 830576 - Parameter recommendations for Oracle 10g not relevant for BW/4HANA
– Note 1171650 - Automated Oracle DB parameter check not relevant for BW/4HANA
– Note 702728 - Profile parameter for export/import buffer instances
– Note 656060 - OLAP: Cache main memory displacement not functioning
– Note 480710 - Profile parameters for table buffers
– Note 912367 - Composite Note: RSADMIN Parameter not relevant for BW/4HANA
Optional: create a client copy for BW with tx
SCCL relevant for BW/4HANA again
© SAP 2007 / Page 3
SAP First Guidance – complete functional scope (CFS) for SAP BW/4HANA
© SAP 2007 / Page 4
Check Instance Profile with tx RZ10 and ST02
© SAP 2007 / Page 5
Create logical System with tx BD54
for SAP BW/4HANA the Source System must be from Type ODP
Example BW on HANA
Example BW/4HANA
© SAP 2007 / Page 6
Assign Logical System to Client with tx SCC4
© SAP 2007 / Page 7
Check the System Change Option with SE06
© SAP 2007 / Page 8
Check the BW Basis Customizing with
SPRO F5 Business Warehouse
© SAP 2007 / Page 9
Check the OLAP cache Settings with
RSCUSTV14 or RSRCACHE
© SAP 2007 / Page 10
Check the default Process Settings with
tx RSODSO_SETTINGS in 7.3x and higher
Details:https://help.sap.com/viewer/2e90b26cf7484203a523bf0f4b1bc137/7.5.7/en-US/4a0fbe46f4e81b41e10000000a42189c.html
© SAP 2007 / Page 11
Check the Background Settings with
tx RSBATCH
© SAP 2007 / Page 12
Check the transfer parameters in general
includes flatfile and loading from internal data marts
SAP BW system
SAP ERP system
PI_BASIS_70x
transaction SBIW
transaction SBIW
flatfile
loading
transaction
RSCUSTV6
PI_BASIS_6xx
Please note that the entries
are not vice versa, every
system looks for it’s own
stored transfer parameter’s.
© SAP 2007 / Page 13
Check the Transfer Values with tx SBIW
Details:https://help.sap.com/viewer/ccc9cdbdc6cd4eceaf1e5485b1bf8f4b/7.5.7/en-US/4a1df92d5c171b40e10000000a42189c.html
Example BW on HANA
Example BW/4HANA
Checking general Performance Settings
only relevant for none HANA based systems
SAP BW system
transaction
SPRO press F5
Some of these settings where introduced in SAP NetWeaver as advanced
settings in table RSADMIN.
RSCUSTV24
RSCUSTV25
RSCUSTV26
© SAP 2007 / Page 15
Assign the default logon Group with tx SMLG
© SAP 2007 / Page 16
Check Authorization of user BWREMOTE and
the myself connection with tx SM59 and SU01
Role SAP_RO_BCTRA
Profile S_BI-WHM_RFC
Check InfoObject 0IOBJNM
only relevant for SAP BW Systems (not BW/4HANA)
Before you start any Transaction for the start of Business Content Installation (also true before
starting transaction RSA1 which triggers the technical content Installation) in new installed
systems you must take of the InfoObject 0IOBJNM first.
So go to transaction SNRO (Number Range Object Maintenance) and look for BIM9999991.
Change the NR Status from 0 to 2 and save the changes.
After this the following transactions can be called to activate the necessary BC:
RS_PERS_ACTIVATE Activating Personalization in BEx
RSTCT_INST_BIAC Report RSTCT_ACTIVATEADMINCOCKPIT_NEW
RSTCO_ADMIN Installation SAP BW technical content
Note 1543092 - Upgrade of BP_BWADMIN 1.0 to BP_BWADMIN 3.0(BP BW ADMINISTRATION)
© SAP 2007 / Page 17
Activate the technical content for BW with
tx RSTCO_ADMIN or RSTCT_INST_BIAC
© SAP 2007 / Page 18
■ Please make sure that the InfoObject 0LANGU is
activated from technical content (TCT) correctly in
advance.
■ Note 984021 - Changes to InfoObject 0LANGU
■ Note 1746515 - Error while loading the template
0TPlI*
■ Check in advance, that the Web Templates for 3.x
also activated, as stated in the Note above.
■ Note 934848 - Collective note: (FAQ) BW
Administration Cockpit
■ Note 1731668 - Skip Installation of BW
Administration Cockpit
Not relevant anymore for SAP BW on HANA and BW/4HANA
Check the help pages for the CDS Views for Data Warehouse Monitoring
https://help.sap.com/viewer/107a6e8a38b74ede94c833ca3b7b6f51/1.0.3/
en-US/1e596b288f494f5d815c86cf94c3fbbb.html
Note 2447513 – BW4HANA: Starter Add-On – further corrections (4)
© SAP 2007 / Page 19
Activate BEx History with Transaction RSA1
or tx RS_PERS_ACTIVATE
Note 1637935 - Short Dump RAISE_EXCEPTION RSO_CONTENT_INSTALL_BATCH X_MESSAGE
Not relevant anymore for BW/4HANA
Check the help pages for the CDS Views for Data Warehouse Monitoring
https://help.sap.com/viewer/107a6e8a38b74ede94c833ca3b7b6f51/1.0.3/
en-US/1e596b288f494f5d815c86cf94c3fbbb.html
Note 2447513 – BW4HANA: Starter Add-On – further corrections (4)
© SAP 2007 / Page 20
Start the Administrator Workbench with RSA1
only relevant for SAP BW Systems (not BW/4HANA)
Not relevant anymore for BW/4HANA, as tx RSA1 only used for legacy tasks
SAP First Guidance - Implementing BW-MT as the new SAP BW Modeling Experience
© SAP 2007 / Page 21
Activate Data Marts with tx RSA1 or RSORBCT
only relevant for SAP BW Systems (not BW/4HANA)
Activate Web Services with tx SICF
© SAP 2007 / Page 22
SAP First Guidance – complete functional scope (CFS) for SAP BW 7.50
SAP First Guidance – complete functional scope (CFS) for SAP BW/4HANA
Transaction SICF and
SICF_INST and SGEN
Activate ABAP WebDynpro in SAP BW with
tx SICF_INST
Note 1969105 - Master data maintenance for InfoObjects does not start
Note 1088717 - Active services for Web Dynpro ABAP in transaction SICF
Transaction SICF and
SICF_INST and SGEN
Checklist for Connecting BW - ERP
define the users as type dialog first to make all logs visible
Checklist where, what
■ Define user <SID>_ALEBW in BW and R/3 R/3, BW SU01
(Make sure you have the right permissions)
■ Define logical system names (<SID>CLNT<client>) R/3, BW BD54
■ Check ALE communication (e.g. SWU3) R/3, BW SALE
■ Check RFC connection (with remote Logon) R/3, BW SM59
■ Define new source system (manually) BW RSA1
(this is automatically starting a meta data upload)
■ Customizing settings of the R/3 system R/3, BW SBIW, RSA1
(Do this before the first Data load starts)
■ Check/transfer of global settings R/3, BW RSA1
(Use this Function as a Simulation to check)
■ Activate the necessary BC Data sources R/3, BW SBIW, RSA1
■ Perform the meta data upload on the BW system R/3, BW SBIW, RSA1
Prerequisites for the System Change Option
in the production environment BW and ERP must be prepared
For a successful source system connection, the following settings are required for the system
change option during the connection process:
SCC4 client maintenance
– Changes to repository and cross-client customizing allowed
– Automatic recording of changes
– CATT and eCATT are allowed
SE06 namespaces
– Customer namespace modifiable
– Customer developments HOME modifiable
– Local developments (no automatic transport) LOCAL modifiable
– Business Warehouse SAP name space /BI0/ modifiable
– Business Warehouse Customer name space /BIC/ modifiable
When you connect productive R/3 and ERP systems to the productive SAP BW system, note
that will have to open the systems during the connection. Afterwards you can close it again.
No changes will be done afterwards.
Authorization's for the connection users (example):
(BW) BWREMOTE S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI_UPLOAD (optional)
Role SAP_RO_BTCRA
(ERP) ALEREMOTE S_BI-WX_RFCA
When connecting SAP Source Systems
transfer Exchange Rates/Global Settings
© SAP 2007 / Page 26
When connecting SAP Source Systems
transfer Exchange Rates/Global Settings
© SAP 2007 / Page 27
© SAP 2007 / Page 28
Which BEx Analyzer version is called by RRMX
tx RRMX_CUST (only relevant for SAP BW)
© SAP 2007 / Page 29
call Report RSCPINST with tx SE38 and
activate the settings
© SAP 2007 / Page 30
Check the CTS with tx STMS and setup an
transport connection
© SAP 2007 / Page 31
Check the CTS with tx STMS and setup an
transport connection
© SAP 2007 / Page 32
Create a Package and assign this to the
Transport Connection with tx SE80
© SAP 2007 / Page 33
Assign a new BEx Transport Request with tx
RSA1 Transport Connection (only SAP BW)
© SAP 2007 / Page 34
Assign Source Systems for Business Content
with tx RSA1 Transport Connection
© SAP 2007 / Page 35
Further Settings related to BW with tx RSKC
© SAP 2007 / Page 36
Check Table RSADMINA with SE16
(summarize of customizing) RSADMIN
© SAP 2007 / Page 37
Activate background dispatching with tx RZ21
© SAP 2007 / Page 38
Assign the default menu with tx SSM2
© SAP 2007 / Page 39
Create default Printer with tx SPAD
Check transactions tx STRUSTSSO2/SMICM
for the correct web dynpro support
© SAP 2007 / Page 40
http://scn.sap.com/docs/DOC-7856#section18
transaction
SMICM
© SAP 2007 / Page 41
Thank you!