Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf ·...
-
Upload
nguyennguyet -
Category
Documents
-
view
220 -
download
2
Transcript of Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf ·...
![Page 1: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/1.jpg)
1Copyright © 2001, S. K. Mitra
1
Digital Processing ofDigital Processing ofContinuous-Time SignalsContinuous-Time Signals
• Digital processing of a continuous-timesignal involves the following basic steps:(1) Conversion of the continuous-timesignal into a discrete-time signal,(2) Processing of the discrete-time signal,(3) Conversion of the processed discrete-time signal back into a continuous-timesignal
![Page 2: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/2.jpg)
2Copyright © 2001, S. K. Mitra
2
Digital Processing ofDigital Processing ofContinuous-Time SignalsContinuous-Time Signals
• Conversion of a continuous-time signal intodigital form is carried out by an analog-to-digital (A/D) converter
• The reverse operation of converting adigital signal into a continuous-time signalis performed by a digital-to-analog (D/A)converter
![Page 3: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/3.jpg)
3Copyright © 2001, S. K. Mitra
3
Digital Processing ofDigital Processing ofContinuous-Time SignalsContinuous-Time Signals
• Since the A/D conversion takes a finiteamount of time, a sample-and-hold (S/H)circuit is used to ensure that the analogsignal at the input of the A/D converterremains constant in amplitude until theconversion is complete to minimize theerror in its representation
![Page 4: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/4.jpg)
4Copyright © 2001, S. K. Mitra
4
Digital Processing ofDigital Processing ofContinuos-Time SignalsContinuos-Time Signals
• To prevent aliasing, an analog anti-aliasingfilter is employed before the S/H circuit
• To smooth the output signal of the D/Aconverter, which has a staircase-likewaveform, an analog reconstruction filteris used
![Page 5: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/5.jpg)
5Copyright © 2001, S. K. Mitra
5
Digital Processing ofDigital Processing ofContinuous-Time SignalsContinuous-Time Signals
Complete block-diagram
• Since both the anti-aliasing filter and thereconstruction filter are analog lowpassfilters, we review first the theory behind thedesign of such filters
• Also, the most widely used IIR digital filterdesign method is based on the conversion ofan analog lowpass prototype
Anti-aliasing
filterS/H A/D D/ADigital
processorReconstruction
filter
![Page 6: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/6.jpg)
6Copyright © 2001, S. K. Mitra
6
Sampling of Continuous-TimeSampling of Continuous-TimeSignalsSignals
• As indicated earlier, discrete-time signals inmany applications are generated bysampling continuous-time signals
• We have seen earlier that identical discrete-time signals may result from the samplingof more than one distinct continuous-timefunction
![Page 7: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/7.jpg)
7Copyright © 2001, S. K. Mitra
7
Sampling of Continuous-TimeSampling of Continuous-TimeSignalsSignals
• In fact, there exists an infinite number ofcontinuous-time signals, which whensampled lead to the same discrete-timesignal
• However, under certain conditions, it ispossible to relate a unique continuous-timesignal to a given discrete-time signals
![Page 8: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/8.jpg)
8Copyright © 2001, S. K. Mitra
8
Sampling of Continuous-TimeSampling of Continuous-TimeSignalsSignals
• If these conditions hold, then it is possibleto recover the original continuous-timesignal from its sampled values
• We next develop this correspondence andthe associated conditions
![Page 9: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/9.jpg)
9Copyright © 2001, S. K. Mitra
9
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• Let be a continuous-time signal that issampled uniformly at t = nT, generating thesequence g[n] where
with T being the sampling period• The reciprocal of T is called the sampling
frequency , i.e.,
∞<<∞−= nnTgng a ),(][
)(tga
TTF 1=TF
![Page 10: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/10.jpg)
10Copyright © 2001, S. K. Mitra
10
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• Now, the frequency-domain representation of is given by its continuos-time Fourier
transform (CTFT):
• The frequency-domain representation of g[n]is given by its discrete-time Fourier transform(DTFT):
)(tga
dtetgjG tjaa ∫
∞∞−
Ω−=Ω )()(
∑∞−∞=
ω−ω = nnjj engeG ][)(
![Page 11: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/11.jpg)
11Copyright © 2001, S. K. Mitra
11
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• To establish the relation betweenand , we treat the sampling operationmathematically as a multiplication ofby a periodic impulse train p(t):
∑ −δ=∞
−∞=nnTttp )()(
)( ωjeG)( ΩjGa
×)(tga )(tgp
)(tp
)(tga
![Page 12: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/12.jpg)
12Copyright © 2001, S. K. Mitra
12
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• p(t) consists of a train of ideal impulseswith a period T as shown below
• The multiplication operation yields animpulse train:
∑ −δ==∞
−∞=naap nTtnTgtptgtg )()()()()(
![Page 13: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/13.jpg)
13Copyright © 2001, S. K. Mitra
13
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• is a continuous-time signal consistingof a train of uniformly spaced impulses withthe impulse at t = nT weighted by thesampled value of at that instant
)(tg p
)(nTga )(tga
![Page 14: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/14.jpg)
14Copyright © 2001, S. K. Mitra
14
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• There are two different forms of :• One form is given by the weighted sum of
the CTFTs of :
• To derive the second form, we note that p(t)can be expressed as a Fourier series:
where
)( ΩjGp
)( nTt −δ
∑∞−∞=
Ω−=Ω nnTj
ap enTgjG )()(
∑∞ −∞==∑∞ −∞== Ωk ek etp ktj
TkTTj
TT121 )/()( π
TT /π2=Ω
![Page 15: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/15.jpg)
15Copyright © 2001, S. K. Mitra
15
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• The impulse train therefore can beexpressed as
• From the frequency-shifting property of theCTFT, the CTFT of is given by
)(tg p
)()( 1 tgetg ak
ktjTp T ⋅
= ∑
∞
−∞=
Ω
)(tge aktj TΩ
( ))( Ta kjG Ω−Ω
![Page 16: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/16.jpg)
16Copyright © 2001, S. K. Mitra
16
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• Hence, an alternative form of the CTFT of is given by
• Therefore, is a periodic function ofΩ consisting of a sum of shifted and scaledreplicas of , shifted by integermultiples of and scaled by
( )∑∞
−∞=Ω−Ω=Ω
kTaTp kjGjG )()( 1
)( ΩjGp
)( ΩjGaTΩ T
1
)(tg p
![Page 17: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/17.jpg)
17Copyright © 2001, S. K. Mitra
17
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• The term on the RHS of the previousequation for k = 0 is the baseband portionof , and each of the remaining termsare the frequency translated portions of
• The frequency range
• is called the baseband or Nyquist band
)( ΩjGp
)( ΩjGp
22TT Ω
≤Ω ≤Ω−
![Page 18: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/18.jpg)
18Copyright © 2001, S. K. Mitra
18
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• Assume is a band-limited signal with aCTFT as shown below
• The spectrum of p(t) having asampling period is indicated below
)(tga)( ΩjGa
TT Ω
π= 2)( ΩjP
![Page 19: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/19.jpg)
19Copyright © 2001, S. K. Mitra
19
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• Two possible spectra of are shownbelow
)( ΩjGp
![Page 20: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/20.jpg)
20Copyright © 2001, S. K. Mitra
20
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• It is evident from the top figure on theprevious slide that if , there is nooverlap between the shifted replicas ofgenerating
• On the other hand, as indicated by the figureon the bottom, if , there is anoverlap of the spectra of the shifted replicasof generating
)( ΩjGa)( ΩjGp
)( ΩjGp)( ΩjGa
mT Ω>Ω 2
mT Ω<Ω 2
![Page 21: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/21.jpg)
21Copyright © 2001, S. K. Mitra
21
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
If , can berecovered exactly from by passing itthrough an ideal lowpass filter witha gain T and a cutoff frequency greaterthan and less than as shownbelow
mT Ω>Ω 2 )(tga)(tga
)( ΩjHrcΩ
mΩ mT Ω−Ω
![Page 22: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/22.jpg)
22Copyright © 2001, S. K. Mitra
22
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• The spectra of the filter and pertinentsignals are shown below
![Page 23: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/23.jpg)
23Copyright © 2001, S. K. Mitra
23
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• On the other hand, if , due to theoverlap of the shifted replicas of ,the spectrum cannot be separated byfiltering to recover because of thedistortion caused by a part of the replicasimmediately outside the baseband foldedback or aliased into the baseband
mT Ω<Ω 2)( ΩjGa
)( ΩjGa)( ΩjGa
![Page 24: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/24.jpg)
24Copyright © 2001, S. K. Mitra
24
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
Sampling theorem - Let be a band-limited signal with CTFT for
• Then is uniquely determined by itssamples , if
where
)(tga0)( =ΩjGa
mΩ>Ω
)(tga)(nTga ∞≤≤∞− n
mT Ω≥Ω 2TT /2π=Ω
![Page 25: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/25.jpg)
25Copyright © 2001, S. K. Mitra
25
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• The condition is often referred toas the Nyquist condition
• The frequency is usually referred to asthe folding frequency2
TΩ
mT Ω≥Ω 2
![Page 26: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/26.jpg)
26Copyright © 2001, S. K. Mitra
26
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• Given , we can recover exactlyby generating an impulse train
and then passing it through an ideal lowpassfilter with a gain T and a cutofffrequency satisfying
∑∞−∞= −δ= n ap nTtnTgtg )()()(
)( nTga )(tga
)( ΩjHrcΩ
( )mTcm Ω−Ω<Ω<Ω
![Page 27: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/27.jpg)
27Copyright © 2001, S. K. Mitra
27
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• The highest frequency contained inis usually called the Nyquist frequencysince it determines the minimum samplingfrequency that must be used tofully recover from its sampled version
• The frequency is called the Nyquistrate
mΩ
mT Ω=Ω 2)(tga
mΩ2
)(tga
![Page 28: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/28.jpg)
28Copyright © 2001, S. K. Mitra
28
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• Oversampling - The sampling frequency ishigher than the Nyquist rate
• Undersampling - The sampling frequency islower than the Nyquist rate
• Critical sampling - The sampling frequencyis equal to the Nyquist rate
• Note: A pure sinusoid may not berecoverable from its critically sampledversion
![Page 29: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/29.jpg)
29Copyright © 2001, S. K. Mitra
29
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• In digital telephony, a 3.4 kHz signalbandwidth is acceptable for telephoneconversation
• Here, a sampling rate of 8 kHz, which isgreater than twice the signal bandwidth, isused
![Page 30: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/30.jpg)
30Copyright © 2001, S. K. Mitra
30
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• In high-quality analog music signalprocessing, a bandwidth of 20 kHz has beendetermined to preserve the fidelity
• Hence, in compact disc (CD) musicsystems, a sampling rate of 44.1 kHz, whichis slightly higher than twice the signalbandwidth, is used
![Page 31: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/31.jpg)
31Copyright © 2001, S. K. Mitra
31
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• Example - Consider the three continuous-time sinusoidal signals:
• Their corresponding CTFTs are:
)6cos()(1 ttg π=)14cos()(2 ttg π=)26cos()(3 ttg π=
)]26()26([)(3 π+Ωδ+π−Ωδπ=ΩjG)]14()14([)(2 π+Ωδ+π−Ωδπ=ΩjG
)]6()6([)(1 π+Ωδ+π−Ωδπ=ΩjG
![Page 32: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/32.jpg)
32Copyright © 2001, S. K. Mitra
32
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• These three transforms are plotted below
![Page 33: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/33.jpg)
33Copyright © 2001, S. K. Mitra
33
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• These continuous-time signals sampled at arate of T = 0.1 sec, i.e., with a samplingfrequency rad/sec
• The sampling process generates thecontinuous-time impulse trains, ,
, and• Their corresponding CTFTs are given by
π=Ω 20T
)(1 tg p)(2 tg p )(3 tg p
( ) 31,)(10)( ≤≤Ω−Ω=Ω ∑∞−∞= lll k Tp kjGjG
![Page 34: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/34.jpg)
34Copyright © 2001, S. K. Mitra
34
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• Plots of the 3 CTFTs are shown below
![Page 35: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/35.jpg)
35Copyright © 2001, S. K. Mitra
35
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• These figures also indicate by dotted linesthe frequency response of an ideal lowpassfilter with a cutoff at anda gain T = 0.1
• The CTFTs of the lowpass filter output arealso shown in these three figures
• In the case of , the sampling ratesatisfies the Nyquist condition, hence noaliasing
π=Ω=Ω 102/Tc
)(1 tg
![Page 36: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/36.jpg)
36Copyright © 2001, S. K. Mitra
36
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• Moreover, the reconstructed output isprecisely the original continuous-timesignal
• In the other two cases, the sampling ratedoes not satisfy the Nyquist condition,resulting in aliasing and the filter outputsare all equal to cos(6πt)
![Page 37: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/37.jpg)
37Copyright © 2001, S. K. Mitra
37
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• Note: In the figure below, the impulseappearing at Ω = 6π in the positivefrequency passband of the filter results fromthe aliasing of the impulse in at
• Likewise, the impulse appearing at Ω = 6πin the positive frequency passband of thefilter results from the aliasing of the impulsein at
)(2 ΩjGπ−=Ω 14
π=Ω 26)(3 ΩjG
![Page 38: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/38.jpg)
38Copyright © 2001, S. K. Mitra
38
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• We now derive the relation between theDTFT of g[n] and the CTFT of
• To this end we compare
with
and make use of
)(tg p
∑∞−∞=
ω−ω = nnjj engeG ][)(
∑∞−∞=
Ω−=Ω nnTj
ap enTgjG )()(
∞<<∞−= nnTgng a ),(][
![Page 39: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/39.jpg)
39Copyright © 2001, S. K. Mitra
39
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• Observation: We have
or, equivalently,
• From the above observation and
Tpj jGeG
/)()(
ω=Ωω Ω=
Tj
p eGjGΩ=ω
ω=Ω )()(
( )∑∞
−∞=Ω−Ω=Ω
kTaTp kjGjG )()( 1
![Page 40: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/40.jpg)
40Copyright © 2001, S. K. Mitra
40
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
we arrive at the desired result given by
TkTaT
j jkjGeG/
1 )()(ω=Ω
∞
−∞=
ω ∑ Ω−Ω=
)(1 ∑ Ω−=∞
−∞=
ω
kTTaT
jkjG
)( 21 ∑ −=∞
−∞=
πω
k Tk
TaTjjG
![Page 41: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/41.jpg)
41Copyright © 2001, S. K. Mitra
41
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• The relation derived on the previous slidecan be alternately expressed as
• From
or from
it follows that is obtained fromby applying the mapping
∑ Ω−Ω= ∞−∞=
Ωk TaT
Tj jkjGeG )()( 1
Tpj jGeG
/)()(
ω=Ωω Ω=
Tj
p eGjGΩ=ω
ω=Ω )()(
Tω=Ω
)( ΩjGp)( ωjeG
![Page 42: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/42.jpg)
42Copyright © 2001, S. K. Mitra
42
Effect of Sampling in theEffect of Sampling in theFrequency DomainFrequency Domain
• Now, the CTFT is a periodicfunction of Ω with a period
• Because of the mapping, the DTFTis a periodic function of ω with a period 2π
)( ΩjGp
)( ωjeGTT /2π=Ω
![Page 43: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/43.jpg)
43Copyright © 2001, S. K. Mitra
43
Recovery of the Analog SignalRecovery of the Analog Signal• We now derive the expression for the output
of the ideal lowpass reconstructionfilter as a function of the samplesg[n]
• The impulse response of the lowpassreconstruction filter is obtained by takingthe inverse DTFT of :
)( ΩjHr
)(tga^
)( ΩjHr
=Ω)( jHr
ccT
Ω>ΩΩ≤Ω
,0,
)(thr
![Page 44: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/44.jpg)
44Copyright © 2001, S. K. Mitra
44
Recovery of the Analog SignalRecovery of the Analog Signal
• Thus, the impulse response is given by
• The input to the lowpass filter is theimpulse train :
∫∫ΩΩ−
Ωπ
Ω∞∞−π
Ω=ΩΩ= c
cdedejHth tjTtj
rr 221 )()(
∞≤≤∞−ΩΩ
= tt
tT
c ,2/)sin(
∑∞−∞= −δ= np nTtngtg )(][)()(tgp
![Page 45: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/45.jpg)
45Copyright © 2001, S. K. Mitra
45
Recovery of the Analog SignalRecovery of the Analog Signal
• Therefore, the output of the ideallowpass filter is given by:
• Substituting in theabove and assuming for simplicity
, we get
)(tga^
∑∞
−∞=−==
nrpra nTthngtgthtg )(][)()()(^
*
)2//()sin()( ttth Tcr ΩΩ=
TTc /2/ π=Ω=Ω
)(tga^ ∑
∞
−∞= −π−π=
n TnTtTnTtng
/)(]/)(sin[][
![Page 46: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/46.jpg)
46Copyright © 2001, S. K. Mitra
46
Recovery of the Analog SignalRecovery of the Analog Signal
• The ideal bandlimited interpolation processis illustrated below
![Page 47: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/47.jpg)
47Copyright © 2001, S. K. Mitra
47
Recovery of the Analog SignalRecovery of the Analog Signal• It can be shown that when in
and for• As a result, from
we observe
for all integer values of r in the range
2/)sin()(
tt
rT
cthΩΩ=
2/Tc Ω=Ω
1)0( =rh 0)( =nThr 0≠n
)(tga^ ∑∞
−∞= −π−π= n TnTt
TnTtng/)(
]/)(sin[][
)(][)( rTgrgrTg aa ==
∞<<∞− r
![Page 48: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/48.jpg)
48Copyright © 2001, S. K. Mitra
48
Recovery of the Analog SignalRecovery of the Analog Signal
• The relation
holds whether or not the condition of thesampling theorem is satisfied
• However, for all values oft only if the sampling frequency satisfiesthe condition of the sampling theorem
)(][)( rTgrgrTg aa ==^
)()( rTgrTg aa =^
TΩ
![Page 49: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/49.jpg)
49Copyright © 2001, S. K. Mitra
49
Implication of the SamplingImplication of the SamplingProcessProcess
• Consider again the three continuous-timesignals: , ,and
• The plot of the CTFT of thesampled version of is shownbelow
)6cos()(1 ttg π= )14cos()(2 ttg π=)26cos()(3 ttg π=
)(1 tg)(1 tg p
)(1 ΩjG p
![Page 50: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/50.jpg)
50Copyright © 2001, S. K. Mitra
50
Implication of the SamplingImplication of the SamplingProcessProcess
• From the plot, it is apparent that we canrecover any of its frequency-translatedversions outside thebaseband by passing through an idealanalog bandpass filter with a passbandcentered at
])620cos[( tk π±)(1 tg p
π±=Ω )620( k
![Page 51: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/51.jpg)
51Copyright © 2001, S. K. Mitra
51
Implication of the SamplingImplication of the SamplingProcessProcess
• For example, to recover the signal cos(34πt),it will be necessary to employ a bandpassfilter with a frequency response
where ∆ is a small number=Ω)( jHr otherwise,0
)34()34(,1.0 π∆+≤Ω≤π∆−
![Page 52: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/52.jpg)
52Copyright © 2001, S. K. Mitra
52
Implication of the SamplingImplication of the SamplingProcessProcess
• Likewise, we can recover the aliasedbaseband component cos(6πt) from thesampled version of either orby passing it through an ideal lowpass filterwith a frequency response:
=Ω)( jHr otherwise,0
)6()6(,1.0 π∆+≤Ω≤π∆−
)(2 tg p )(3 tg p
![Page 53: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/53.jpg)
53Copyright © 2001, S. K. Mitra
53
Implication of the SamplingImplication of the SamplingProcessProcess
• There is no aliasing distortion unless theoriginal continuous-time signal alsocontains the component cos(6πt)
• Similarly, from either or wecan recover any one of the frequency-translated versions, including the parentcontinuous-time signal or as thecase may be, by employing suitable filters
)(2 tg p )(3 tg p
)(3 tg)(2 tg
![Page 54: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/54.jpg)
54Copyright © 2001, S. K. Mitra
54
Sampling of Sampling of Bandpass Bandpass SignalsSignals• The conditions developed earlier for the
unique representation of a continuous-timesignal by the discrete-time signal obtainedby uniform sampling assumed that thecontinuous-time signal is bandlimited in thefrequency range from dc to some frequency
• Such a continuous-time signal is commonlyreferred to as a lowpass signal
mΩ
![Page 55: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/55.jpg)
55Copyright © 2001, S. K. Mitra
55
Sampling ofSampling of Bandpass Bandpass Signals Signals• There are applications where the continuous-
time signal is bandlimited to a higherfrequency range with
• Such a signal is usually referred to as thebandpass signal
• To prevent aliasing a bandpass signal can ofcourse be sampled at a rate greater thantwice the highest frequency, i.e. by ensuring
HT Ω≥Ω 2
HL Ω≤Ω≤Ω 0>ΩL
![Page 56: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/56.jpg)
56Copyright © 2001, S. K. Mitra
56
Sampling ofSampling of Bandpass Bandpass Signals Signals
• However, due to the bandpass spectrum ofthe continuous-time signal, the spectrum ofthe discrete-time signal obtained by samplingwill have spectral gaps with no signalcomponents present in these gaps
• Moreover, if is very large, the samplingrate also has to be very large which may notbe practical in some situations
HΩ
![Page 57: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/57.jpg)
57Copyright © 2001, S. K. Mitra
57
Sampling ofSampling of Bandpass Bandpass Signals Signals
• A more practical approach is to use under-sampling
• Let define the bandwidth ofthe bandpass signal
• Assume first that the highest frequencycontained in the signal is an integer multipleof the bandwidth, i.e.,
HΩ
LH Ω−Ω=∆Ω
)(∆Ω=Ω MH
![Page 58: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/58.jpg)
58Copyright © 2001, S. K. Mitra
58
Sampling ofSampling of Bandpass Bandpass Signals Signals
• We choose the sampling frequency tosatisfy the condition
which is smaller than , the Nyquistrate
• Substitute the above expression for in
HΩ2
TΩ
MTHΩ=∆Ω=Ω 22 )(
TΩ
( )∑∞
−∞=Ω−Ω=Ω
kTaTp kjGjG )()( 1
![Page 59: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/59.jpg)
59Copyright © 2001, S. K. Mitra
59
Sampling ofSampling of Bandpass Bandpass Signals Signals• This leads to
• As before, consists of a sum ofand replicas of shifted by integermultiples of twice the bandwidth ∆Ω andscaled by 1/T
• The amount of shift for each value of kensures that there will be no overlapbetween all shifted replicas no aliasing
( )∑∞ −∞= ∆Ω−Ω=Ω k kjjGjG aTp )()( 21
)( ΩjGp)( ΩjGa
)( ΩjGa
![Page 60: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/60.jpg)
60Copyright © 2001, S. K. Mitra
60
Sampling ofSampling of Bandpass Bandpass Signals Signals• Figure below illustrate the idea behind
)( ΩjGa
Ω0LΩ−HΩ− HΩLΩ
)( ΩjGp
Ω0LΩ−HΩ− HΩLΩ
![Page 61: Sampling of Continuous-Time Signalssip.cua.edu/res/docs/courses/ee515/chapter05/ch5-1.pdf · Sampling of Continuous-Time Signals • As indicated earlier, discrete-time signals in](https://reader034.fdocuments.us/reader034/viewer/2022051523/5a7904b47f8b9a00168c4df3/html5/thumbnails/61.jpg)
61Copyright © 2001, S. K. Mitra
61
Sampling ofSampling of Bandpass Bandpass Signals Signals• As can be seen, can be recovered from
by passing it through an idealbandpass filter with a passband given by
and a gain of T• Note: Any of the replicas in the lower
frequency bands can be retained by passing through bandpass filters with
passbands , providing a translation to
lower frequency ranges
)(tga)(tgp
HL Ω≤Ω≤Ω
)(tgp)()( ∆Ω−Ω≤Ω≤∆Ω−Ω kk HL
11 −≤≤ Mk