[email protected] · COLD HEADING QUALITY (CHQ) STAINLESS STEEL WIRE. Cold Heading Quality (CHQ)...
1
COLD HEADING QUALITY (CHQ) STAINLESS STEEL WIRE. Cold Heading Quality (CHQ) Stainless Steel wire is supplied in a wide range of grades and diameters for the optimization of your manufacturing process. - Strict control of chemical property in accordance with the final application. - Uniform quality through continuous heat treatment processing. - Excellent surface condition by accurate dimension control system. - Stable and uniform coating through in-line processing. - Newly developed E-Co coating gives higher cold headability and longer tool life. - E-Co is especially successful in the manufacture of components requiring to be bent after the heading process. Specifications: Applications Grade Diameter Surface Standards Tensile Strengt h Packing Screw 304CU, XM7 0.80 – 34.00 mm S-CO DULL S-CO BRIGHT E-CO ASTM A 493 JIS G 4315 KS D 3697 WSA WSB 12”, 16”, 20”, 24”, 32”, 42” COILS 16”, 20”, 24” Carriers Rivet 304HC, 310S Nail 304, 304L, 304J3 Anchor Bolt 316, 316L, 410 Heat Resisting Bolt Tapping Screw 430, 434A Page 1 of 1 Nockers Engineering Products Tel: +27 11 447 8562 Fax: +27 86 509 2862 [email protected]
Transcript of [email protected] · COLD HEADING QUALITY (CHQ) STAINLESS STEEL WIRE. Cold Heading Quality (CHQ)...
COLD HEADING QUALITY (CHQ) STAINLESS STEEL WIRE.
Cold Heading Quality (CHQ) Stainless Steel wire is supplied in a wide range of grades and
diameters for the optimization of your manufacturing process.
- Strict control of chemical property in accordance with the final application.
- Uniform quality through continuous heat treatment processing.
- Excellent surface condition by accurate dimension control system.
- Stable and uniform coating through in-line processing.
- Newly developed E-Co coating gives higher cold headability and longer tool life.
- E-Co is especially successful in the manufacture of components requiring to be bent
after the heading process.
Specifications:
Applications Grade Diameter Surface Standards Tensile Strength
Packing
Screw 304CU, XM7
0.80 – 34.00 mm
S-CO DULL S-CO BRIGHT E-CO
ASTM A 493 JIS G 4315 KS D 3697
WSA WSB
12”, 16”, 20”, 24”, 32”, 42” COILS 16”, 20”, 24” Carriers
Rivet 304HC, 310S
Nail 304, 304L, 304J3
Anchor Bolt 316, 316L, 410
Heat Resisting Bolt Tapping Screw
430, 434A
Page 1 of 1
Nockers Engineering ProductsTel: +27 11 447 8562Fax: +27 86 509 [email protected]
