Cemented Carbide Cold Heading Die NibsEN… · High toughness cold heading die High toughness cold...
Transcript of Cemented Carbide Cold Heading Die NibsEN… · High toughness cold heading die High toughness cold...
Cemented Carbide Cold Heading Die Nibs
EN
About US
CB CARBIDE CB Carbide was founded in Taiwan by Mr.&Mrs. Liao in 1973 as a trading company. With the aspiration to provide faster delivery and value to its customers in 1978 the first carbide plant was established in Tamshui, Taiwan. To further achieve vertical integration of raw material supply the company ventured into China to establish its first China plant in 1999.
CERATIZIT CERATIZIT Group looks back on a history of almost 90 years. The Group came into existence in 2002 when the two carbide manufactures CERAMETAL and PLANSEE TIZIT were merged. CERAMETAL was founded in 1931 in Luxemburg, PLANSEE TIZIT was founded in 1921 in Austria. After the merger, CEARTIZIT Group increased the international expansion with the opening of sales offices worldwide.
CB CERATIZIT is the most competent and competitive supplier of carbide hard material in Asia. The company is headquartered from Taipei, Taiwan and operates from Xiamen, China. CB CERATIZIT has the ability to offer global production with localized service to our customers.We are the specialist for wear protection and cutting tools solutions: covering electronics, mould and die making, automotive, mining and construction industries.
CB CERATIZIT is your partner to grow.The leading manufacturer of hard-metal products and solutions in Asia.
Grades - Composition And Properties
KG5
KG6
EA65
EA90
ST6
ST7
VA80
VA90
VA95
14.31
14.12
13.75
13.22
13.8
13.4
13.58
13.39
13.12
88.3
87.3
85.0
82.8
86.0
85.3
84.0
82.5
81.5
1200
1100
910
760
990
940
830
–
–
340
320
300
270
270
270
280
240
220
88
86
82
76
85
80
80
78
75
12
14
18
24
15
20
20
22
25
Medium
Medium
Coarse
Coarse
Coarse
Coarse
Coarse
Coarse
Coarse
GradeWC+
Other(±0.5%)
Co(±0.5%)
GrainSize
Density(g/cm3)±0.1
ISO 3369 ISO 3738 ISO 3738 ISO 3327 ISO 4499
Hardness(HRA)±0.5
Hardness(HV30)
TRS(kgf/mm2) Microstructure
0.2-0.5
0.5-0.8
0.8-1.3
1.3-2.5
2.5-6.0
Ultrafine
Submicron
Fine
Medium
Coarse
Tungsten carbide grain size (μm) Classification
Classification of tungsten carbide grain size
03
Area Of Application
Coarse grades
Medium grades
High toughness cold heading die
High toughness cold heading die
Φ20~Φ50 bolt die
lnner diameter Φ2.1 and below nut and bolt die for stainless steel
lnner diameter Φ2.1 and above nut and bolt die for stainless steel
High impact die and fastener
High impact fastener
High impact fastener
KG5
KG6
EA90
ST6
ST7
VA80
VA90
VA95
Φ20 and below bolt dieEA65
04
Sinter Tolerance Table
05
0 ~ 6
6 ~ 10
10 ~ 14
14 ~ 18
18 ~ 24
<19 20 ~ 30 31 ~ 50 51 ~ 80 81 ~ 120 >140
Example: blank for finished dimension OD 20 x L50 x ID3.5 mm ODmin = 2.7 to IDmax = 3.2 mm
Length (mm)
ID Tol. (mm)
Inner Diameter (mm)
<15
16-25
26-30
31-40
41-50
51-60
61-80
81-100
101-120
>121
10 ~ 18 20 ~ 28 32 ~ 50
Example: blank for finished dimension OD 20 x L50 x ID3.5 mmLengthLmin = 50.5 to Lmax = 51.9 mm
L Tol. (mm)
Outer Diameter (mm)
Length (mm)
• Length Tolerance:
• Inner Diameter Tolerance:
10 ~ 14
15 ~ 18
19 ~ 24
25 ~ 28
29 ~ 40
41 ~ 50
+0.4 ~ +1.0
-
-
-
-
-
<19
+0.4 ~ +1.1
+0.4 ~ +1.1
+0.4 ~ +1.3
+0.4 ~ +1.4
+0.4 ~ +1.5
-
20 ~ 35
+0.4 ~ +1.1
+0.4 ~ +1.2
+0.4 ~ +1.3
+0.4 ~ +1.5
+0.4 ~ +1.6
+0.5 ~ +2.0
35 ~ 50
+0.4 ~ +1.2
+0.4 ~ +1.3
+0.4 ~ +1.4
+0.4 ~ +1.5
+0.4 ~ +1.6
+0.5 ~ +2.0
55 ~ 80
-
-
+0.5 ~ +1.6
+0.5 ~ +1.7
+0.5 ~ +1.8
+0.5 ~ +2.1
90 ~ 120
-
-
-
-
+0.5 ~ +1.9
+0.6 ~ +2.2
>140
Example: blank for finished dimension OD 20 x L50 x ID2.0 mm ODmin = 20.4 to ODmax = 21.3 mm
Length (mm)
OD Tol. (mm)
Outer Diameter (mm)
• Outer Diameter Tolerance:
Length (mm)
Outer Diameter (mm)
Inner Diameter (mm)
-0.3 ~ -0.7
-
-
-
-
-0.3 ~ -0.8
-0.3 ~ -0.9
-0.4 ~ -1.1
-0.4 ~ -1.1
-
-0.3 ~ -0.8
-0.3 ~ -1.0
-0.4 ~ -1.1
-0.4 ~ -1.2
-0.4 ~ -1.3
-0.4 ~ -1.0
-0.4 ~ -1.1
-0.4 ~ -1.2
-0.4 ~ -1.3
-0.4 ~ -1.4
-
-0.4 ~ -1.2
-0.4 ~ -1.3
-0.4 ~ -1.4
-0.4 ~ -1.6
-
-
-
-0.5 ~ -1.9
-0.6 ~ -2.2
+0.4 ~ +1.1
+0.4 ~ +1.2
+0.4 ~ +1.3
+0.4 ~ +1.4
+0.4 ~ +1.5
+0.5 ~ +1.8
+0.5 ~ +2.2
+0.5 ~ +2.6
-
-
-
-
+0.4 ~ +1.4
+0.4 ~ +1.5
+0.5 ~ +1.9
+0.5 ~ +2.3
+0.5 ~ +2.7
+0.5 ~ +3.1
+0.6 ~ +3.7
-
-
-
+0.4 ~ +1.5
+0.4 ~ +1.6
+0.5 ~ +2.0
+0.5 ~ +2.3
+0.5 ~ +2.7
+0.5 ~ +3.1
+0.6 ~ +3.7
+0.6 ~ +4.2
Standard Dimension
8
10
12
15
18
20
22
25
30
35
40
45
50
55
60
70
OD (mm)
<20
<20
<30
<40
<45
<45
<45
<45
<45
<45
<50
<50
<50
<50
<50
<50
L (mm)
1.2~5.0
1.2~6.0
1.2~8.0
1.2~10.0
1.2~10.0
1.2~10.0
1.2~10.0
1.2~17.7
1.2~24.0
1.2~25.0
1.2~25.0
1.2~25.0
1.2~25.0
1.2~25.0
1.2~25.0
1.2~25.0
ID (mm)
* Other dimension available upon request
ID
OD
L
Blanks For Cold Heading Die Nibs
06
Standard Dimension
15
18
20
25
30
35
40
45
50
55
60
70
OD (mm)
<40
<45
<45
<45
<45
<45
<50
<50
<50
<50
<50
<50
L (mm)
5.4~8.4
5.4~11.7
5.4~11.7
5.4~21.9
5.4~21.9
5.4~21.9
5.4~21.9
5.4~24.2
5.4~29.4
5.4~31.8
5.4~35.4
5.4~42.0
W (mm)
* Other dimension available upon request
W
OD
L
Blanks For Cold Heading Die Nibs
07
15
18
20
25
30
35
40
45
50
55
60
70
<40
<45
<45
<45
<45
<45
<50
<50
<50
<50
<50
<50
4.0~6.9
4.0~9.3
4.0~9.3
4.0~13.0
4.0~18.0
4.0~21.0
4.0~24.3
4.0~27.8
4.0~31.5
4.0~31.5
4.0~37.8
4.0~37.8
Standard Dimension
* Other dimension available upon request
OD (mm) L (mm) IC (mm)
OD
L IC
Blanks For Cold Heading Die Nibs
08
Standard & Custom Nib Blanks
1. Select your require grade
2. Select your require OD
3. Select your require ID / W / IC
* Other grades available upon request.
* Other OD available upon request.
* Other ID / W / IC available upon request.
OD(mm)
KG5 KG6 EA65 EA90 ST6 ST7 VA80 VA90 VA95
Standard
From 1.2~2.5mmdepends on OD
ID
Standard ID
W
From 1.2~2.5mmdepends on OD
Standard W
IC
From 4.0~37.8mmdepends on OD
Standard IC
Standard
30 35 40 45 50 55 60 70
09
8 10 12 15 18 20 22 25
Standard & Custom Nib Blanks
5. Select your require α and L
Standard α
L
3 ˚ 5 ˚ 6.6 ˚ 7 ˚
id
L 1
* Other amount of slots available upon request.* Other id x L1 available upon request.
* Other dimension available upon request.
αL
Customize your own style of nibs.
1.5 x 1
4 x 2
2 x 1
6 x 3
3 x 1.5id x L 1
From 20~50 mm depends on OD
Standard
2 3
4 5 6
4. Select your require header die slot
10
ContactCB-CERATIZIT (Taiwan) Group Head OfficeADD: 3F., NO. 217, Sec.2, New Taipei Blvd., Hsin Chuang Dist., New Taipei City 24250, Taiwan (R.O.C.)TEL: + 886-2-8521-6688 FAX: + 886-2-8521-1011E-mail: [email protected]
CB-CERATIZIT (Xiamen) China Head OfficeADD: 69 Xingxi Rd, Xinglin, Jimei, Xiamen, China 361022TEL:+86-592-666-1000 FAX:+86-592-621-9599E-mail: [email protected]
China
JapanKorea
Taiwan
ThailandVietnam
Australia
Indonesia
Singapore
Malaysia
Philippines
www.cbceratizit.com
We reserve the right to make technical changes for improvement of the product.
2011
/ 05