Sabs & Sans List of Codes

Standards available in electronic format (PDF)

October 2009

1

1

7

3.03

1.02

2.03

1

2.03

2

1

1

1

2

1

1.01

2.01

1

2.03

1

4.01

Edition

Standards for standards Part 1: The development ofnational standards and other normative documents

Standards for standards Part 2: Requirements forthe recognition of Standard DevelopmentOrganizations (SDOs) in South Africa

Lead-acid starter batteries

Locks, latches, and associated furniture for doors(Domestic Type)

Unplasticized poly(vinyl chloride) (PVC-U)components for external rainwater systems

Wax polish, solvent-based, for floors and furniture

Malleable cast iron fittings threaded to ISO 7-1

Wax emulsion polish for floors and furniture

Information technology - Security techniques -Modes of operation for an n-bit block cipher

Glass and plastics in furniture

Information technology - Security techniques - Hash-functions Part 1: General

Information technology - Security techniques - Hash-functions Part 2: Hash-functions using an n-bit blockcipher

Information technology - Security techniques - Hash-functions Part 3: Dedicated hash-functions

Information technology - Security techniques - Hash-functions Part 4: Hash-functions using modulararithmetic

The inspection, testing and examination of mobilecranes

Primary zinc

Safety of escalators and moving walks Part 1:Construction and installation

Glazed ceramic wall tiles and fittings

Steel wire and wire products for fences Part 4: Steelwire welded mesh fencing

Soft solders

Title

SANS 1-1:2003

SANS 1-2:2007

SANS 2:2009

SANS 4:2008

SANS 11:2007

SANS 13:2008

SANS 14:1994/ISO 49:1994, IDT, Ed. 2

SANS 15:2008

SANS 16:2007/ISO/IEC 10116:2006, IDT, Ed. 3

SANS 17:2005

SANS 18-1:2003/ISO/IEC 10118-1:2000, IDT, Ed. 2




SANS 19:2007

SANS 20:2008

SANS 21-1:2009/EN 115-1:2008, IDT, Ed. 1

SANS 22:2005

SANS 23-4:2003/EN 10223-4:1998, IDT, Ed. 1

SANS 24:2008

SANS Number

(SABS 2)

(SABS 4)

(SABS 11)

(SABS 13)

(SABS ISO 49)

(SABS 15)

(SABS 20)

(SABS 22)

(SABS 24)


October 2009

2.01

2

2.01

2

4

3.01

2

1

1.02

3.03

2

2.03

1

2

2

3.01

3.01

1

2

1

Edition

Zinc alloy ingots for die-castings

Zinc alloy ingots for die-castings and zinc alloy die-castings (SANS 25 and SANS 26 bound together)

Zinc alloy die-castings

Cold reduced tinmill products - Electrolytic tinplateand electrolytic chromium/chromium oxide coatedsteel

Metal ties for cavity walls

Articles made of precious metals

Metallic products - Types of inspection documents

Internal and/or external protective coatings for steeltubes - Specification for hot dip galvanized coatingsapplied in automatic plants

Equipment for use in industrial rope access work

Metallic naphthenates for timber preservation

Small medical gas cylinders - Pin-index yoke-typevalve connections

Manually operated medium-vacuum sterilizers(autoclaves)

Verification of pendulum impact testing machines fortesting steels

Hard coal and coke - Determination of ash fusibility

Welding consumables - Technical deliveryconditions for welding filler materials - Type ofproduct, dimensions, tolerances and markings

Coal-tar type disinfectant liquids (black and white)

Edible gelatin

Hard coal and coke - Determination of volatilematter

Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods forvisually assessing the effects of heating

Solid mineral fuels - Determination of phosphoruscontent - Reduced molybdophosphate photometricmethod

Title

SANS 25:2008

SANS 26 AND SANS 25:1977

SANS 26:2008

SANS 27:2008/EN 10202:2001, IDT, Ed. 2

SANS 28:1986

SANS 29:2004

SANS 31:2007/EN 10204:2004, IDT, Ed. 2

SANS 32:1997/EN 10240:1997, IDT, Ed. 1

SANS 33:2007

SANS 38:2008

SANS 39:2006/ISO 407:2004, IDT, Ed. 3

SANS 40:2009

SANS 42:1965/ISO/R 442:1965, IDT, Ed. 1

SANS 43:2008/ISO 540:2008, IDT, Ed. 4

SANS 44:2009/ISO 544:2003, IDT, Ed. 3

SANS 47:2007

SANS 49:2007

SANS 50:1998/ISO 562:1998, IDT, Ed. 2

SANS 51:2008/ISO 580:2005, IDT, Ed. 3

SANS 52:1981/ISO 622:1981, IDT, Ed. 1

SANS Number

(SABS 25)

(SABS 26 AND SANS 25)

(SABS 26)

(SABS EN 10202)

(SABS 28)

(SABS 29)

(SABS EN 10204)

(SABS EN 10240)

(SABS 1833)

(SABS 38)

(SABS ISO 407)

(SABS 40)

(SABS ISO/R 442)

(SABS ISO 540)

(SABS ISO 544)

(SABS 47)

(SABS 49)

(SABS ISO 562)

(SABS ISO 580)

(SABS ISO 622)


October 2009

2

2

2.01

2

3.01

3.01

5.04

1

1

3

1

3.03

4.01

4

3

3

3

4

3

5.01

Edition

Welding consumables - Rods, wires and depositsfor tungsten inert gas welding of non-alloy and fine-grain steels - Classification

Rubber, vulcanized or thermoplastic - Acceleratedageing and heat resistance tests

Coiled wire for automatic baling machines

Cranes - Limiting and indicating devices Part 1:General

Steel pipes Part 1: Pipes suitable for threading andof nominal size not exceeding 150 mm

Steel pipes Part 2: Screwed pieces and pipe fittingsof nominal size not exceeding 150 mm

Blankets

Single-use sterile rubber surgical gloves -Specification

Framework for setting and implementing nationalambient air quality standards

Conditioning of textiles and standard temperateatmosphere for determining their physical andmechanical properties

Inspection and testing of vehicle hoists

Wooden handles for brooms, hay-forks, and rakes(including general requirements for other woodenhandles for tools)

Textiles - Mass per unit area of conditioned fabrics

Mass (oven-dry plus conventional allowance) perunit area of textile fabrics, free from non-fibrousmaterial

Width of a textile fabric sample

Width of a textile fabric in a piece or roll

Length of a textile fabric sample

Length of fabric in a piece or roll

Thickness of wool fabrics

Bituminous roofing felt

Title

SANS 53:2005/ISO 636:2004, IDT, Ed. 3

SANS 54:2009/ISO 188:2007, IDT, Ed. 4

SANS 58:2008

SANS 61-1:2009/ISO 10245-1:2008, IDT, Ed. 2

SANS 62-1:2003

SANS 62-2:2009

SANS 63:2009

SANS 68:2003/ISO 10282:2002, IDT, Ed. 2

SANS 69:2004

SANS 70:2004

SANS 71:2004

SANS 77:2008

SANS 79:2004

SANS 80:2004

SANS 81:2004

SANS 82:2004

SANS 83:2007

SANS 84:2005

SANS 85:2007

SANS 92:2008

SANS Number

(SABS ISO 636)

(SABS 58)

(SABS 62-1)

(SABS 62-2)

(SABS 63)

(SABS SM 70)

(SABS 77)

(SABS SM 79)

(SABS SM 80)

(SABS SM 81)

(SABS SM 82)

(SABS SM 83)

(SABS SM 84)

(SABS SM 85)

(SABS 92)


October 2009

1

1

1

6.01

1

3

1.01

1.01

1.01

1.01

1

1

1

1

1

1

1

1

1

1

Edition

Textile slings - Safety Part 1: Flat woven webbingslings, made of man-made fibres, for generalpurpose use

Textile slings - Safety Part 2: Roundslings, made ofman-made fibres, for general purpose use

Batch sampling and acceptance criteria forexplosion-protected apparatus (EPA)

Electric cables - Impregnated paper-insulated metal-sheathed cables for rated voltages 3,3/3,3 kV to19/33 kV (excluding pressure assisted cables)

Ingredient labelling of cosmetic products

White chalks

White metal designated WM 6




Textiles - Tests for colour fastness Part A01:General principles of testing

Textiles - Tests for colour fastness Part A02: Greyscale for assessing change in colour

Textiles - Tests for colour fastness Part A03: Greyscale for assessing staining

Textiles - Tests for colour fastness Part A08:Vocabulary used in colour measurement

Textiles - Tests for colour fastness Part B01: Colourfastness to light: Daylight

Textiles - Tests for colour fastness Part B02: Colourfastness to artificial light: Xenon arc fading lamp test

Textiles - Tests for colour fastness Part B04: Colourfastness to artificial weathering: Xenon arc fadinglamp test

Textiles - Tests for colour fastness Part B05:Detection and assessment of photochromism

Textiles - Tests for colour fastness Part C10: Colourfastness to washing with soap or soap and soda

Textiles - Tests for colour fastness Part D01: Colourfastness to dry cleaning

Title

SANS 94-1:2003/EN 1492-1:2000, IDT, Ed. 1

SANS 94-2:2003/EN 1492-2:2000, IDT, Ed. 1

SANS 96:2006

SANS 97:2001

SANS 98:2006

SANS 99:2008

SANS 101:2009

SANS 102:2009

SANS 103:2009

SANS 104:2009

SANS 105-A01:1994/ISO 105-A01:1994, IDT, Ed. 5

SANS 105-A02:1993/ISO 105-A02:1993, IDT, Ed. 4

SANS 105-A03:1993/ISO 105-A03:1993, IDT, Ed. 4

SANS 105-A08:2003/ISO 105-A08:2001, IDT, Ed. 1

SANS 105-B01:1994/ISO 105-B01:1994, IDT, Ed. 5

SANS 105-B02:1994/ISO 105-B02:1994, IDT, Ed. 4

SANS 105-B04:1994/ISO 105-B04:1994, IDT, Ed. 4

SANS 105-B05:1993/ISO 105-B05:1993, IDT, Ed. 4

SANS 105-C10:2007/ISO 105-C10:2006, IDT, Ed. 1

SANS 105-D01:1993/ISO 105-D01:1993, IDT, Ed. 4

SANS Number

(SABS 97)

(SABS 99)

(SABS ISO 105-A01)

(SABS ISO 105-A02)

(SABS ISO 105-A03)

(SABS ISO 105-B01)

(SABS ISO 105-B02)

(SABS ISO 105-B04)

(SABS ISO 105-B05)

(SABS ISO 105-D01)


October 2009

1

1

1

1

2

2

2

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Textiles - Tests for colour fastness Part D02: Colourfastness to rubbing: Organic solvents

Textiles - Tests for colour fastness Part E01: Colourfastness to water

Textiles - Tests for colour fastness Part E02: Colourfastness to sea water

Textiles - Tests for colour fastness Part E03: Colourfastness to chlorinated water (swimming-pool water)

Textiles - Tests for colour fastness Part E04: Colourfastness to perspiration

Textiles - Tests for colour fastness Part E05: Colourfastness to spotting: Acid

Textiles - Tests for colour fastness Part E06: Colourfastness to spotting: Alkali

Textiles - Tests for colour fastness Part E07: Colourfastness to spotting: Water

Textiles - Tests for colour fastness Part F: Standardadjacent fabrics

Textiles - Tests for colour fastness Part F01:Specification for wool adjacent fabric

Textiles - Tests for colour fastness Part F03:Specification for polyamide adjacent fabric

Textiles - Tests for colour fastness Part F04:Specification for polyester adjacent fabric

Textiles - Tests for colour fastness Part F05:Specification for acrylic adjacent fabric

Textiles - Tests for colour fastness Part F06:Specification for silk adjacent fabric

Textiles - Tests for colour fastness Part F07:Specification for secondary acetate adjacent fabric

Textiles - Tests for colour fastness Part F10:Specification for adjacent fabric: Multifibre

Textiles - Tests for colour fastness Part J01: Generalprinciples for measurement of surface colour

Textiles - Tests for colour fastness Part J03:Calculation of colour differences

Textiles - Tests for colour fastness Part N01: Colourfastness to bleaching: Hypochlorite

Textiles - Tests for colour fastness Part X05: Colourfastness to organic solvents

Textiles - Tests for colour fastness Part X11: Colourfastness to hot pressing

Title

SANS 105-D02:1993/ISO 105-D02:1993, IDT, Ed. 4

SANS 105-E01:1994/ISO 105-E01:1994, IDT, Ed. 4

SANS 105-E02:1994/ISO 105-E02:1994, IDT, Ed. 4

SANS 105-E03:2004/ISO 105-E03:1994, IDT, Ed. 3

SANS 105-E04:2009/ISO 105-E04:2008, IDT, Ed. 5

SANS 105-E05:2008/ISO 105-E05:2006, IDT, Ed. 4

SANS 105-E06:2008/ISO 105-E06:2006, IDT, Ed. 4

SANS 105-E07:2004/ISO 105-E07:1989, IDT, Ed. 3

SANS 105-F:1985/ISO 105-F:1985, IDT, Ed. 3

SANS 105-F01:2001/ISO 105-F01:2001, IDT, Ed. 1

SANS 105-F03:2001/ISO 105-F03:2001, IDT, Ed. 1

SANS 105-F04:2001/ISO 105-F04:2001, IDT, Ed. 1

SANS 105-F05:2001/ISO 105-F05:2001, IDT, Ed. 1

SANS 105-F06:2000/ISO 105-F06:2000, IDT, Ed. 1

SANS 105-F07:2001/ISO 105-F07:2001, IDT, Ed. 1

SANS 105-F10:1989/ISO 105-F10:1989, IDT, Ed. 1

SANS 105-J01:2003/ISO 105-J01:1997, IDT, Ed. 4

SANS 105-J03:2003/ISO 105-J03:1995, IDT, Ed. 1

SANS 105-N01:1993/ISO 105-N01:1993, IDT, Ed. 2

SANS 105-X05:1994/ISO 105-X05:1994, IDT, Ed. 4

SANS 105-X11:1994/ISO 105-X11:1994, IDT, Ed. 4

SANS Number

(SABS ISO 105-D02)

(SABS ISO 105-E01)

(SABS ISO 105-E02)

(SABS ISO 105-E04)

(SABS ISO 105-F)

(SABS ISO 105-F01)

(SABS ISO 105-F03)

(SABS ISO 105-F04)

(SABS ISO 105-F05)

(SABS ISO 105-F06)

(SABS ISO 105-F07)

(SABS ISO 105-F10)

(SABS ISO 105-N01)

(SABS ISO 105-X05)

(SABS ISO 105-X11)


October 2009

3

1

1.01

1.01

1.01

1.01

1

1

2

1

1

1

2.01

1

2

1.01

1.03

1

1.01

1

1

Edition

Textiles - Tests for colour fastness Part X12: Colourfastness to rubbing

Textiles - Tests for colour fastness Part X16: Colourfastness to rubbing - Small areas





Sealing compounds for the building industry, two-component, polysulphide base

Laboratory glassware - Graduated pipettes

Laboratory glassware - Single volume pipettes

Laboratory glassware - Interchangeable conicalground joints

Laboratory glassware - Principles of design andconstruction of volumetric glassware

Laboratory glassware - Burettes

Liquid antiseptics containing substituted phenolics

Laboratory glassware - Pipettes - Colour coding

Stemming for use in blasting

Hot dip galvanized coatings on fabricated iron andsteel articles - Specifications and test methods

Pressure-sensitive adhesive tapes for electricalpurposes (Metric units)

Slots in platens for projection welding machines


Solid mineral fuels - Determination of carbonatecarbon content - Gravimetric method

Coal preparation plant - Principles and conventionsfor flowsheets

Title

SANS 105-X12:2006/ISO 105-X12:2002, IDT, Ed. 5

SANS 105-X16:2004/ISO 105-X16:2001, IDT, Ed. 1

SANS 106:2009

SANS 107:2009

SANS 108:2009

SANS 109:2009

SANS 110:1973

SANS 111:2009/ISO 835:2007, IDT, Ed. 1

SANS 112:2009/ISO 648:2008, IDT, Ed. 2

SANS 113:1976/ISO 383:1976, IDT, Ed. 1

SANS 114:1978/ISO 384:1978, IDT, Ed. 1

SANS 115:2009/ISO 385:2005, IDT, Ed. 1

SANS 116:2007

SANS 117:1975/ISO 1769:1975, IDT, Ed. 1

SANS 120:2009

SANS 121:2000/ISO 1461:1999, IDT, Ed. 2

SANS 122:2007

SANS 123:1981/ISO 865:1981, IDT, Ed. 1

SANS 124:2009

SANS 125:1997/ISO 925:1997, IDT, Ed. 3

SANS 126:1989/ISO 924:1989, IDT, Ed. 2

SANS Number

(SABS ISO 105-X12)

(SABS 110)

(SABS ISO 648)

(SABS ISO 383)

(SABS ISO 384)

(SABS 116)

(SABS ISO 1769)

(SABS 120)

(SABS ISO 1461)

(SABS 122)

(SABS ISO 865)

(SABS ISO 925)

(SABS ISO 924)


October 2009

2

1

1

2

1

2

2

1.01

1.01

1

1

1

1

1

1

1

Edition

Laboratory glassware - One-mark volumetric flasks

Thermoplastics pipes, fittings and assemblies for theconveyance of fluids - Determination of theresistance to internal pressure Part 1: Generalmethod

Solid mineral fuels - Determination of ash content

Coal and coke - Calculation of analyses to differentbases

Solid mineral fuels - Vocabulary Part 1: Termsrelating to coal preparation

Metallic coatings - Electrodeposited coatings ofnickel plus chromium and of copper plus nickel pluschromium

Metallic coatings - Electrodeposited coatings ofnickel

Resin cored solders (non-corrosive)

Resin cored solders (highly activated)

Acoustics - Measurement of sound insulation inbuildings and of building elements Part 1:Requirements for laboratory test facilities withsuppressed flanking transmission

Acoustics - Measurement of sound insulation inbuildings and of building elements Part 2:Determination, verification and application ofprecision data

Acoustics - Measurement of sound insulation inbuildings and of building elements Part 3:Laboratory measurements of airborne soundinsulation of building elements

Acoustics - Measurement of sound insulation inbuildings and of building elements Part 4: Fieldmeasurements of airborne sound insulation betweenrooms

Acoustics - Measurement of sound insulation inbuildings and of building elements Part 5: Fieldmeasurements of airborne sound insulation offacade elements and facades

Acoustics - Measurement of sound insulation inbuildings and of building elements Part 7: Fieldmeasurements of impact sound insulation of floors

Acoustics - Measurement of sound insulation inbuildings and of building elements Part 8:Laboratory measurements of the reduction oftransmitted impact noise by floor coverings on aheavyweight standard floor

Title

SANS 128:1998/ISO 1042:1998, IDT, Ed. 4

SANS 130-1:2007/ISO 1167-1:2006, IDT, Ed. 1

SANS 131:1997/ISO 1171:1997, IDT, Ed. 3

SANS 132:2009/ISO 1170:2008, IDT, Ed. 2

SANS 133:1993/ISO 1213-1:1993, IDT, Ed. 2

SANS 135:2008/ISO 1456:2003, IDT, Ed. 3

SANS 136:2008/ISO 1458:2002, IDT, Ed. 3

SANS 137:2009

SANS 138:2009

SANS 140-1:1997/ISO 140-1:1997, IDT, Ed. 3

SANS 140-2:1991/ISO 140-2:1991, IDT, Ed. 2

SANS 140-3:1995/ISO 140-3:1995, IDT, Ed. 2

SANS 140-4:1998/ISO 140-4:1998, IDT, Ed. 2

SANS 140-5:1998/ISO 140-5:1998, IDT, Ed. 2

SANS 140-7:1998/ISO 140-7:1998, IDT, Ed. 2

SANS 140-8:1997/ISO 140-8:1997, IDT, Ed. 2

SANS Number

(SABS ISO 1042)

(SABS ISO 1171)

(SABS ISO 1170)

(SABS ISO 1213-1)

(SABS ISO 1456)

(SABS ISO 1458)

(SABS 137)

(SABS 138)

(SABS ISO 140-1)

(SABS ISO 140-2)

(SABS ISO 140-3)

(SABS ISO 140-4)

(SABS ISO 140-5)

(SABS ISO 140-7)

(SABS ISO 140-8)


October 2009

1

1

2.02

2.02

3.01

2

1

1

2.04

1

6.02

4.08

3.03

1

3.03

4.04

3.01

3.05

1

Edition

Acoustics - Measurement of sound insulation inbuildings and of building elements Part 11:Laboratory measurements of the reduction oftransmitted impact sound by floor coverings onlightweight reference floors

Acoustics - Measurement of sound insulation inbuildings and of building elements Part 14:Guidelines for special situations in the field

Glass-reinforced polyester (GRP) laminates

Narrow elastic fabrics and strip

Lidocaine (lignocaine) hydrochloride andnoradrenaline (norepinephrine) injection for dentaluse

Metallic and oxide coatings - Measurement ofcoating thickness - Microscopical method

Carpets - Determination of number of tufts and/orloops per unit length and per unit area

Metallic materials - Charpy pendulum impact testPart 1: Test method

Absorbent cotton wool and cotton-and-viscose woolproducts

Machine-made textile floor coverings -Determination of thickness

Fixed electric storage water heaters

Electric stoves, cooking tops, ovens, grills, andsimilar appliances

Electric cooking plates and surface unit heaters

Textile floor coverings - Determination of thicknessof pile above the substrate

Moulded-case circuit-breakers

Electrical appliances for heating liquids

Electric irons for household or similar use

Electric room heaters

Plastics - Polypropylene (PP) moulding andextrusion materials Part 1: Designation system andbasis for specifications

Title

SANS 140-11:2005/ISO 140-11:2005, IDT, Ed. 1

SANS 140-14:2005/ISO 140-14:2004, IDT, Ed. 1

SANS 141:2006

SANS 142:2001

SANS 143:2007

SANS 144:2008/ISO 1463:2003, IDT, Ed. 3

SANS 147:1986/ISO 1763:1986, IDT, Ed. 2

SANS 148-1:2007/ISO 148-1:2006, IDT, Ed. 1

SANS 149:2009

SANS 150:1986/ISO 1765:1986, IDT, Ed. 2

SANS 151:2008

SANS 153:2006

SANS 154:2005

SANS 155:1999/ISO 1766:1999, IDT, Ed. 3

SANS 156:2007

SANS 158:2003

SANS 159:2006

SANS 160:2008

SANS 161-1:1995/ISO 1873-1:1995, IDT, Ed. 4

SANS Number

(SABS 141)

(SABS 142)

(SABS 143)

(SABS ISO 1463)

(SABS ISO 1763)

(SABS 149)

(SABS ISO 1765)

(SABS 151)

(SABS 153)

(SABS 154)

(SABS ISO 1766)

(SABS 156)

(SABS 158)

(SABS 159)

(SABS 160)

(SABS ISO 1873-1)


October 2009

1

3

1

1

1.01

5.01

3

1.01

1.01

1.01

1.02

2

2

1

2

1

2

2

Edition

Plastics - Polypropylene (PP) moulding andextrusion materials Part 2: Preparation of testspecimens and determination of properties

Gas cylinders - Terminology

Water quality - Determination of dissolved fluoride,chloride, nitrite, orthophosphate, bromide, nitrateand sulfate ions, using liquid chromatography of ionsPart 1: Method for water with low contamination

Water quality - Determination of dissolved anions byliquid chromatography of ions Part 2: Determinationof bromide, chloride, nitrate, nitrite, orthophosphateand sulfate in waste water

Plug and socket-outlet systems for household andsimilar purposes for use in South Africa Part 0:General and safety requirements

Plug and socket-outlet systems for household andsimilar purposes for use in South Africa Part 1:Conventional system, 16 A 250 V a.c.

Plug and socket-outlet systems for household andsimilar purposes for use in South Africa Part 2: IECsystem, 16 A 250 V a.c.

Plug and socket-outlet systems for household andsimilar purposes for use in South Africa Part 3:Conventional system, 6 A 250 V a.c.

Plug and socket-outlet systems for household andsimilar purposes for use in South Africa Part 4:Dedicated system, 16 A 250 V a.c.

Plug and socket-outlet systems for household andsimilar purposes for use in South Africa Part 5: Two-pole, non-rewirable plugs, 2,5 A 250 V a.c., withcord, for connection of class II equipment

Plug and socket-outlet systems for household andsimilar purposes for use in South Africa Part 6: Two-pole systems, 16 A 250 V a.c., for connection ofclass II equipment

Free alkali content and free acid content of lightcoloured soap products

Glassware and equipment for microbiological tests

Paints and varnishes - Examination and preparationof samples for testing

Paints and varnishes - Standard panels for testing

Paints and varnishes - Surface-drying test - Ballotinimethod

Paints and varnishes - Bend test (cylindricalmandrel)

Paints, varnishes and printing inks - Determinationof fineness of grind

Title

SANS 161-2:1997/ISO 1873-2:1997, IDT, Ed. 2

SANS 162:2008/ISO 10286:2007, IDT, Ed. 3

SANS 163-1:1992/ISO 10304-1:1992, IDT, Ed. 1

SANS 163-2:1995/ISO 10304-2:1995, IDT, Ed. 1

SANS 164-0:2007

SANS 164-1:2007

SANS 164-2:2006

SANS 164-3:2007

SANS 164-4:2007

SANS 164-5:2007

SANS 164-6:2009

SANS 169:2006

SANS 171:2006

SANS 174:1992/ISO 1513:1992, IDT, Ed. 3

SANS 175:2006/ISO 1514:2004, IDT, Ed. 4

SANS 176:1973/ISO 1517:1973, IDT, Ed. 1

SANS 177:2004/ISO 1519:2002, IDT, Ed. 2

SANS 178:2006/ISO 1524:2000, IDT, Ed. 3

SANS Number

(SABS ISO 1873-2)

(SABS ISO 10286)

(SABS ISO 10304-1)

(SABS ISO 10304-2)

(SABS 164-1)

(SABS 164-2)

(SABS SM 184)

(SABS SM 552)

(SABS ISO 1513)

(SABS ISO 1514)

(SABS ISO 1517)

(SABS ISO 1519)

(SABS ISO 1524)


October 2009

2.01

3.01

3

1.02

1.04

1.05

1.02

1.03

2.01

1

3.02

3.01

1.03

4.01

2.01

1.02

2.01

1

2.01

3

Edition

Mutton cloth

Primary cells and batteries

Thermostats for electric storage water heaters

Conductors for overhead electrical transmissionlines Part 1: Copper wires and stranded copperconductors

Conductors for overhead electrical transmissionlines Part 2: Stranded aluminium conductors

Conductors for overhead electrical transmissionlines Part 3: Aluminium conductors, steel reinforced

Conductors for overhead electrical transmissionlines Part 4: Copper-covered steel wire fortelecommunication purposes

Conductors for overhead electrical transmissionlines Part 5: Zinc-coated steel wires for conductorsand stays

The production of sorghum beer

The determination of peeling load of direct mouldedfootwear

Immersion-type heating units for electricalappliances

Energy regulators for electric heating units

Butyl rubber sheet (for waterproofing)

Short-link steel chain (medium-tolerance) for liftingpurposes

Expanded metal Part 1: Sheets and plates

Expanded metal Part 2: Building products

Cast steel gate valves

Pesticides: Biological evaluation of the efficacy ofmolluscicides

Fire dampers

Pesticides: Foaming of wettable powders andsuspension concentrates

Title

SANS 179:2007

SANS 180:2004

SANS 181:2004

SANS 182-1:2008

SANS 182-2:2008

SANS 182-3:2003

SANS 182-4:2008

SANS 182-5:2008

SANS 183:2007

SANS 184:1973

SANS 185:2005

SANS 186:2003

SANS 187:2007

SANS 189:2006

SANS 190-1:2008

SANS 190-2:2008

SANS 191:2008

SANS 192:1978

SANS 193:2004

SANS 194:2006

SANS Number

(SABS 179)

(SABS 180)

(SABS 181)

(SABS 182-1)

(SABS 182-2)

(SABS 182-3)

(SABS 182-4)

(SABS 182-5)

(SABS 183)

(SABS SM 667)

(SABS 185)

(SABS 186)

(SABS 187)

(SABS 189)

(SABS 190-1)

(SABS 190-2)

(SABS 191)

(SABS SM 822)

(SABS 193)

(SABS SM 826)


October 2009

2.01

3

2.01

4.02

2

3.03

2.02

2

2

1

1

1

2

2

1

1

4

4.01

3.02

Edition

Sampling of aggregates

Orthopaedic padding

Preparation of test samples of aggregates

Functional-control valves and safety valves fordomestic hot and cold water supply systems

Shut-off valves for refillable liquefied petroleum gascylinders

Copper alloy ingots and castings

Sieve analysis, fines content and dust content ofaggregates

Chloride content of aggregates

Bactericidal and algaecidal efficacy of swimmingpool chemicals

Energy efficiency in buildings Part 1: Generalrequirements

Energy efficiency in buildings Part 2: The applicationof the energy efficiency requirements for buildingswith natural environmental control

Energy efficiency in buildings Part 3: The applicationof the energy efficiency requirements for buildingswith artificial ventilation or air conditioning

Road vehicles - Elastomeric cups and seals forcylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (servicetemperature 70 °C max.)

Road vehicles - Elastomeric seals for hydraulic discbrake cylinders using a non-petroleum basehydraulic brake fluid (Service temperature 120 °Cmax.)

The design and construction of reinforced soils andfills

The design and installation of compressed naturalgas (CNG) vehicle filling stations

Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits andmethods of measurement

Vehicles, boats, and internal combustion engines -Radio disturbance characteristics - Limits andmethods of measurement for the protection of off-board receivers

Sound and television broadcast receivers andassociated equipment - Radio disturbancecharacteristics - Limits and methods ofmeasurement

Title

SANS 195:2006

SANS 196:2007

SANS 197:2006

SANS 198:2009

SANS 199:2009

SANS 200:2008

SANS 201:2008

SANS 202:2006

SANS 203:2007

SANS 204-1:2008

SANS 204-2:2008

SANS 204-3:2008

SANS 205:2009/ISO 6118:2006, IDT, Ed. 2

SANS 206:2009/ISO 6119:2006, IDT, Ed. 2

SANS 207:2006

SANS 208:2005

SANS 211:2009/CISPR 11:2009, IDT, Ed. 5

SANS 212:2009/CISPR 12:2009, IDT, Ed. 6.1

SANS 213:2006/CISPR 13:2006, IDT, Ed. 4.2

SANS Number

(SABS SM 827)

(SABS 196)

(SABS SM 828)

(SABS 198)

(SABS 199)

(SABS 200)

(SABS SM 829)

(SABS SM 830)

(SABS SM 1158)

(SABS CISPR 11)

(SABS CISPR 12)

(SABS CISPR 13)


October 2009

3.01

1.02

4.02

2.02

1.02

2

2.01

1

2

1.02

2

1

1

2

1

Edition

Electromagnetic compatibility - Requirements forhousehold appliances, electric tools and similarapparatus Part 1: Emission

Electromagnetic compatibility - Requirements forhousehold appliances, electric tools and similarapparatus Part 2: Immunity - Product familystandard

Limits and methods of measurement of radiodisturbance characteristics of electrical lighting andsimilar equipment

Specification for radio disturbance and immunitymeasuring apparatus and methods Part 1-1: Radiodisturbance and immunity measuring apparatus -Measuring apparatus

Specification for radio disturbance and immunitymeasuring apparatus and methods Part 1-2: Radiodisturbance and immunity measuring apparatus -Ancillary equipment - Conducted disturbances

Specification for radio disturbance and immunitymeasuring apparatus and methods Part 1-3: Radiodisturbance and immunity measuring apparatus -Ancillary equipment - Disturbance power

Specification for radio disturbance and immunitymeasuring apparatus and methods Part 1-4: Radiodisturbance and immunity measuring apparatus -Ancillary equipment - Radiated disturbances

Specification for radio disturbance and immunitymeasuring apparatus and methods Part 1-5: Radiodisturbance and immunity measuring apparatus -Antenna calibration test sites for 30 MHz to 1 000MHz

Specification for radio disturbance and immunitymeasuring apparatus and methods Part 2-1:Methods of measurement of disturbances andimmunity - Conducted disturbance measurements

Specification for radio disturbance and immunitymeasuring apparatus and methods Part 2-2:Methods of measurement of disturbances andimmunity - Measurement of disturbance power

Specification for radio disturbance and immunitymeasuring apparatus and methods Part 2-3:Methods of measurement of disturbances andimmunity - Radiated disturbance measurements

Specification for radio disturbance and immunitymeasuring apparatus and methods Part 2-4:Methods of measurement of disturbances andimmunity - Immunity measurements

Specification for radio disturbance and immunitymeasuring apparatus and methods Part 3: CISPRtechnical reports

Specification for radio disturbance and immunitymeasuring apparatus and methods Part 4-1:Uncertainties, statistics and limit modelling -Uncertainties in standardized EMC tests

Specification for radio disturbance and immunitymeasuring apparatus and methods Part 4-2:Uncertainties, statistics and limit modelling -Uncertainty in EMC measurements

Title

SANS 214-1:2009/CISPR 14-1:2009, IDT, Ed. 5.1

SANS 214-2:2009/CISPR 14-2:2008, IDT, Ed. 1.2

SANS 215:2009/CISPR 15:2009, IDT, Ed. 7.2

SANS 216-1-1:2008/CISPR 16-1-1:2007, IDT, Ed. 2.2

SANS 216-1-2:2007/CISPR 16-1-2:2006, IDT, Ed. 1.2

SANS 216-1-3:2005/CISPR 16-1-3:2004, IDT, Ed. 2

SANS 216-1-4:2008/CISPR 16-1-4:2008, IDT, Ed. 2.1

SANS 216-1-5:2004/CISPR 16-1-5:2003, IDT, Ed. 1

SANS 216-2-1:2009/CISPR 16-2-1:2008, IDT, Ed. 2

SANS 216-2-2:2006/CISPR 16-2-2:2005, IDT, Ed. 1.2

SANS 216-2-3:2007/CISPR 16-2-3:2006, IDT, Ed. 2

SANS 216-2-4:2004/CISPR 16-2-4:2003, IDT, Ed. 1

SANS 216-3:2005/CISPR/TR 16-3:2003, IDT, Ed. 2

SANS 216-4-1:2009/CISPR/TR 16-4-1:2009, IDT, Ed.2

SANS 216-4-2:2004/CISPR 16-4-2:2003, IDT, Ed. 1

SANS Number

(SABS CISPR 14-1)

(SABS CISPR 14-2)

(SABS CISPR 15)


October 2009

2.01

2

1

1

1

1

3.02

6

3.01

1

2

5.01

4.04

4

3.02

3

3

Edition

Specification for radio disturbance and immunitymeasuring apparatus and methods Part 4-3:Uncertainties, statistics and limit modelling -Statistical considerations in the determination ofEMC compliance of mass-produced products

Specification for radio disturbance and immunitymeasuring apparatus and methods Part 4-4:Uncertainties, statistics and limit modelling -Statistics of complaints and a model for thecalculation of limits for the protection of radioservices

Radio interference characteristics of overheadpower lines and high-voltage equipment Part 1:Description of phenomena

Radio interference characteristics of overheadpower lines and high-voltage equipment Part 2:Methods of measurement and procedure fordetermining limits

Radio interference characteristics of overheadpower lines and high-voltage equipment Part 3:Code of practice for minimizing the generation ofradio noise

Guidance on the use of the substitution method formeasurements of radiation from microwave ovensfor frequencies above 1 GHz

Dissolved acetylene cylinders

Information technology equipment - Radiodisturbance characteristics - Limits and methods ofmeasurement

Writing equipment - Coloured chalks and pastels

Information technology equipment - Immunitycharacteristics - Limits and methods ofmeasurement

Vehicles, boats and internal combustion engines -Radio disturbance characteristics - Limits andmethods of measurement for the protection of on-board receivers

Water taps (metallic bodies)

Burnt clay masonry units

Absorbent cotton wool

Detergent for industrial dishwashing equipment

General purpose pure soap

Filled bar soap

Title

SANS 216-4-3:2007/CISPR/TR 16-4-3:2007, IDT, Ed.2.1

SANS 216-4-4:2008/CISPR/TR 16-4-4:2007, IDT, Ed.2

SANS 218-1:2005/CISPR 18-1:1982, IDT, Ed. 1

SANS 218-2:2005/CISPR 18-2:1986, IDT, Ed. 1

SANS 218-3:2005/CISPR 18-3:1986, IDT, Ed. 1

SANS 219:2005/CISPR 19:1983, IDT, Ed. 1

SANS 220:2009

SANS 222:2009/CISPR 22:2008, IDT, Ed. 6

SANS 223:2006

SANS 224:1997/CISPR 24:1997, IDT, Ed. 1

SANS 225:2008/CISPR 25:2008, IDT, Ed. 3

SANS 226:2004

SANS 227:2007

SANS 228:2007

SANS 232:2003

SANS 235:2008

SANS 236:2008

SANS Number

(SABS 220)

(SABS CISPR 22)

(SABS 223)

(SABS CISPR 24)

(SABS 226)

(SABS 227)

(SABS 228)

(SABS 232)

(SABS 235)

(SABS 236)


October 2009

3

3

3

6.01

5

2

1

3.01

1

5

1

1

1

2.01

2.03

2.04

1

2

3.01

5.01

Edition

Toilet soap

Liquid toilet soap

Carbolic soap

Drinking water

Stainless steel sinks with draining boards (fordomestic use)

Wax crayons

Code of practice for fire protection for electronicequipment installations

Bituminous damp-proof courses

Measurement management systems - Requirementsfor measurement processes and measuringequipment

Long-link and extra-long-link medium tolerance steelchains for general purposes

Metallic hose assemblies for liquid petroleum gasesand liquefied natural gases

Earth-moving machinery - Rubber-tyred machines -Steering requirements

Earth-moving machinery - Crawler machines -Performance requirements and test procedures forbraking systems

Liquid furniture polish (non-wax emulsion type)

Wax shoe polish

Wax stoep polish

Earth-moving machinery - Operator's field of view -Test method and performance criteria

Earth-moving machinery - Basic types - Identificationand terms and definitions

Gummed paper tape (Metric units)

Gypsum plasterboard

Title

SANS 237:2008

SANS 238:2008

SANS 240:2008

SANS 241:2006

SANS 242:2003

SANS 244:1978

SANS 246:2004/BS 6266:2002, IDT, Ed. 3

SANS 248:2007

SANS 250:2003/ISO 10012:2003, IDT, Ed. 1

SANS 251:2006

SANS 252:2003/BS 4089:1999, IDT, Ed. 3

SANS 254:2003/ISO 5010:1992, IDT, Ed. 2

SANS 255:2003/ISO 10265:1998, IDT, Ed. 1

SANS 256:2004

SANS 257:2008

SANS 258:2008

SANS 259:2008/ISO 5006:2006, IDT, Ed. 1

SANS 261:2008/ISO 6165:2006, IDT, Ed. 5

SANS 265:2005

SANS 266:2003

SANS Number

(SABS 237)

(SABS 238)

(SABS 240)

(SABS 241)

(SABS 242)

(SABS 244)

(SABS 248)

(SABS 251)

(SABS 256)

(SABS 257)

(SABS 258)

(SABS 265)

(SABS 266)


October 2009

1

2

2.02

2

2

1

1

1

1

1

1

2.01

5.01

2.04

3

1

1

1.06

1.02

1

Edition

Technical requirements for telex CPE terminalsintended for connection to the public telex network

Wooden handles for beater picks, mattocks, andpicks

Wooden handles for forks, shovels, and spades

Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification

Rubber hoses, textile-reinforced, for general-purpose water applications - Specification

The design, manufacture, maintenance and safeoperation of chairlifts in mines

Quality management systems - Guidelines forquality management in projects

Respiratory protective devices - Filters withbreathing hoses, (Non-mask mounted filters) -Particle filters, gas filters, and combined filters -Requirements, testing, marking

Respiratory protective devices - Compressed air forbreathing apparatus

Respiratory protective devices - Light dutyconstruction compressed air line breathingapparatus incorporating a full face mask, half maskor quarter mask - Requirements, testing, marking

Paints and varnishes - Scratch test

Hole location in fencing posts and droppers

Bending dimensions and scheduling of steelreinforcement for concrete

Spades and shovels

Calcium silicate masonry units

ISO system of limits and fits Part 1: Bases oftolerances, deviations and fits

ISO system of limits and fits Part 2: Tables ofstandard tolerance grades and limit deviations forholes and shafts

Anti-bacterial liquid toilet soap for medical use

Labelling requirements for prepackaged products(prepackages) and general requirements for the saleof goods subject to legal metrology control

Mineral insulating oils - Management ofpolychlorinated biphenyls (PCBs)

Title

SANS 267:2005

SANS 268:1975

SANS 269:2008

SANS 271:2005/ISO 6224:2005, IDT, Ed. 3

SANS 272:2005/ISO 1403:2005, IDT, Ed. 4

SANS 273:2007

SANS 274:2004/ISO 10006:2003, IDT, Ed. 2

SANS 275:2004/EN 12083:1998, IDT, Ed. 1

SANS 277:2004/EN 12021:1998, IDT, Ed. 1

SANS 278:2004/EN 12419:1999, IDT, Ed. 1

SANS 279:2004/ISO 1518:1992, IDT, Ed. 2

SANS 280:2008

SANS 282:2004

SANS 284:2004

SANS 285:1994

SANS 286-1:1988/ISO 286-1:1988, IDT, Ed. 1

SANS 286-2:1988/ISO 286-2:1988, IDT, Ed. 1

SANS 288:2000

SANS 289:2008

SANS 290:2007

SANS Number

(SABS 268)

(SABS 269)

(SABS 280)

(SABS 82)

(SABS 284)

(SABS 285)

(SABS ISO 286-1)

(SABS ISO 286-2)

(SABS 288)


October 2009

1

2

1

3

5.01

3

3.01

1

1

1

3.01

1

1

3.07

2.02

3.03

1

2

1

1

Edition

Plastics - Standard atmospheres for conditioningand testing

Wooden handles for hammers

Construction procurement processes, methods andprocedures

Calcium hypochlorite

Sodium hypochlorite solutions

Mastic asphalt for roofing

Mastic asphalt for damp-proof courses and tanking

Fences Part 12: Specification for steel palisadefences

Non-automatic, undenominated beam scales andbalances subject to legal metrology control

Non-automatic, non-self-indicating or semi-self-indicating, ungraduated counter scales subject tolegal metrology control

Linen threads for footwear

Winged infusion sets (sterile-packed for single use)

Fire extinguishing installations and equipment onpremises Part 4: Specification for carbon dioxidesystems

Penetration grade bitumens

Cutback bitumen (Metric units)

Anionic bitumen road emulsions

Storage tank facilities for hazardous chemicals Part1: Above-ground storage tank facilities for non-flammable chemicals

Category L motor vehicles

Water quality - Enumeration of culturable micro-organisms - Colony count by inoculation in a nutrientagar culture medium

Milk and milk products - Guidance on sampling

Title

SANS 291:2003/ISO 291:1997, IDT, Ed. 2

SANS 292:1975

SANS 294:2004

SANS 295:2007

SANS 296:2008

SANS 297:1975

SANS 298:2007

SANS 301-12:2004/BS 1722-12:1999, IDT, Ed. 3

SANS 302:2005

SANS 303:2005

SANS 304:2008

SANS 305:2007

SANS 306-4:2003/BS 5306-4:2001, IDT, Ed. 3

SANS 307:2005

SANS 308:2009

SANS 309:2004

SANS 310-1:2007

SANS 311:2007

SANS 313:2004/ISO 6222:1999, IDT, Ed. 2

SANS 314:2005/ISO 707:1997, IDT, Ed. 2

SANS Number

(SABS 292)

(SABS 295)

(SABS 296)

(SABS 297)

(SABS 298)

(SABS 304)

(SABS 307)

(SABS 308)

(SABS 309)


October 2009

1

3.01

2.05

1

1

4

4

1

1

1

1

1

1

1

1

1

2

1

Edition

Milk - Determination of fat content - Gravimetricmethod (Reference method)

Industrial hand protectors (leather and fabric) andleather protective clothing

Industrial bitumens

Dried milk and dried milk products - Determination offat content - Gravimetric method (Referencemethod)

Measuring systems - Cryogenic liquids and otherselected liquid gases in vertical tanks - Pressuredifferential method

The production of men's heavy boots, service type(Goodyear welted)

The production of men's boots (Goodyear welted,with stitched or stuck-on outer soles)

Fire detection and alarm systems for hospitals

Guidance on statistical techniques for SANS9001:2000

Information technology - Open Terminal Architecture(OTA) specification - Virtual machine specification

Over-needle peripheral catheters (sterile-packed forsingle use)

Industrial thermoprocessing equipment - Safetyrequirements for combustion and fuel-handlingsystems

Fire extinguishing aerosol systems

Public Switched Telephone Network (PSTN);Attachment requirements for a terminal equipmentincorporating an analogue handset function capableof supporting the justified case service whenconnected to the analogue interface of the PSTN inEurope

Coal - Determination of nitrogen - Semi-microKjeldahl method

Solid mineral fuels - Determination of total sulfur -Eschka method

Terminal Equipment (TE); Attachment requirementsfor pan-European approval for connection to theanalogue Public Switched Telephone Networks(PSTNs) of TE (excluding TE supporting the voicetelephony service) in which network addressing, ifprovided, is by means of Dual Tone Multi Frequency(DTMF) signalling

Stove couplers

Title

SANS 315:2005/ISO 1211:1999, IDT, Ed. 2

SANS 316:2002

SANS 317:2007

SANS 318:2005/ISO 1736:2000, IDT, Ed. 3

SANS 319:2008/OIML R 125:1998, MOD

SANS 320:2008

SANS 321:2008

SANS 322:2005

SANS 325:2004/ISO/TR 10017:2003, IDT, Ed. 2


SANS 327:2007

SANS 329:2008

SANS 331:2005

SANS 332:2004/ETSI TBR 38:1998, IDT, Ed. 1

SANS 333:1996/ISO 333:1996, IDT, Ed. 4

SANS 334:1992/ISO 334:1992, IDT, Ed. 2

SANS 336:2005/ETSI TBR 21:1998, MOD, Ed. 1

SANS 337:2005

SANS Number

(SABS 316)

(SABS 317)

(SABS 320)

(SABS 321)

(SABS ISO 333)

(SABS ISO 334)


October 2009

1

2

4.02

4

4.02

1

5.01

1

1

1

1

1

2

1

1

1

1

1

1

1

1

Edition

Sorbents for hydrocarbon-based products

Conveyor belts - Laboratory scale flammabilitycharacteristics - Requirements and test method

Picks, beater picks and mattocks

Automotive diesel fuel

Steel bedside lockers

Dynamic measuring devices and systems forcryogenic liquids

Woven worsted fabrics

Categorization and conformity assessment criteriafor all pressure equipment

Safety surgical scalpels, sterile packed for single-use

Hard coal - Audibert-Arnu dilatometer test

Rolling bearings - Tolerances Part 1: Terms anddefinitions

Rolling bearings - Tolerances Part 2: Measuring andgauging principles and methods

Rolling bearings - Static load ratings

Rolling bearings - Thrust bearings - Boundarydimensions, general plan

Rolling bearings - Plummer block housings -Boundary dimensions

Rolling bearings - Dynamic load ratings and ratinglife

Rolling bearings - Metric tapered roller bearings -Boundary dimensions and series designations

Rolling bearings - Radial bearings - Tolerances

Heat-treated steels, alloy steels and free-cuttingsteels Part 17: Ball and roller bearing steels

Rolling bearings - Instrument precision bearings

Rolling bearings - Radial internal clearance

Title

SANS 339:2007

SANS 340:2006/ISO 340:2004, IDT, Ed. 3

SANS 341:2007

SANS 342:2006

SANS 343:2004

SANS 344:2005/OIML R81:1998, NEQ

SANS 346:2008

SANS 347:2007

SANS 348:2006

SANS 349:1975/ISO 349:1975, IDT, Ed. 1

SANS 350-1:2005/ISO 1132-1:2000, IDT, Ed. 1

SANS 350-2:2005/ISO 1132-2:2001, IDT, Ed. 1

SANS 351:2007/ISO 76:2006, IDT, Ed. 3

SANS 352:2005/ISO 104:2002, IDT, Ed. 3

SANS 353:2005/ISO 113:1999, IDT, Ed. 2

SANS 354:2005/ISO 281:1990, IDT, Ed. 1

SANS 355:2005/ISO 355:1977, IDT, Ed. 1

SANS 356:2005/ISO 492:2002, IDT, Ed. 4

SANS 357-17:2005/ISO 683-17:1999, IDT, Ed. 2

SANS 358:2005/ISO 1224:1984, IDT, Ed. 1

SANS 359:2005/ISO 5753:1991, IDT, Ed. 2

SANS Number

(SABS 341)

(SABS 342)

(SABS 343)

(SABS 346)

(SABS ISO 349)


October 2009

1

1

2

1

1

1

1

1.01

1

1

1.01

1

2

1

1

1

1

1

1

1

Edition

Rolling bearings - Needle roller bearing track rollers- Boundary dimensions and tolerances

Rolling bearings - Metric tapered roller bearings -Designation system

Plain bearings - Testing of bearing metals -Resistance to corrosion by lubricants under staticconditions

Shipbuilding and marine structures - Bearings forderrick goosenecks - Assemblies and components

Plain bearings - Aluminium alloy for solid bearings

Plain bearings - Requirements on backings for thick-walled multilayer bearings

Plain bearings - Metallic thin-walled half bearings -Determination of the sigma 0,01*-limit

Aloe raw material

Code of practice for the operation of fire protectionmeasures Part 1: Electrical actuation of gaseoustotal flooding extinguishing systems

Code of practice for the operation of fire protectionmeasures Part 2: Mechanical actuation of gaseoustotal flooding and local application extinguishingsystems

Steel mesh reinforced polyethylene (PE) pipes forwater supply

Steel mesh reinforced polyethylene (PE) pipe fittingsfor water supply

Reprocessing of endoscopes Part 1: Flexibleendoscopes and accessories

Reprocessing of endoscopes Part 2: Rigidendoscopes, associated components andaccessories

Standard test methods for chloride ion in water

Standard test method for turbidity of water

Standard test methods for arsenic in water

Standard test methods for selenium in water

Standard test method for antimony in water

Standard test method for aluminium in water

Title

SANS 360:2005/ISO 7063:2003, IDT, Ed. 2

SANS 361:2005/ISO 10317:1992, IDT, Ed. 1

SANS 363:2007/ISO 10129:2006, IDT, Ed. 1

SANS 364:2005/ISO 6045:1987, IDT, Ed. 1

SANS 365:2005/ISO 6279:1979, IDT, Ed. 1

SANS 366:2005/ISO 6280:1981, IDT, Ed. 1

SANS 367:2005/ISO 6282:1983, IDT, Ed. 1

SANS 368:2008

SANS 369-1:2004/BS 7273-1:2000, IDT, Ed. 2

SANS 369-2:2004/BS 7273-2:1992, IDT, Ed. 1

SANS 370:2009

SANS 371:2005

SANS 373-1:2009

SANS 373-2:2009

SANS 374:2005/ASTM D 512:2004, IDT

SANS 375:2005/ASTM D 1889:2000, IDT

SANS 376:2005/ASTM D 2972:2003, IDT

SANS 377:2005/ASTM D 3859:2003, IDT

SANS 379:2005/ASTM D 3697:2002, IDT

SANS 381:2007/ASTM D 857:2002, IDT

SANS Number


October 2009

1

1

1

4

2.06

2.01

2.01

3.05

1

2.03

1

1

1

1

1

1

1

1

1

2.02

Edition

Standard test methods for iron in water

Standard test methods for zinc in water

Standard test methods for lead in water

Fabric linings for footwear

Hammer heads and hand hammers

Commercial dextrose and liquid glucose

Commercial lactose

Forks and rakes

Non-destructive testing - Industrial X-ray andgamma-ray radiology - Vocabulary

Filler rods for braze welding

Non-destructive testing - Ultrasonic inspection -Vocabulary

Non-destructive testing - Radiographic examinationof metallic materials by X- and gamma-rays - Basicrules

Non-destructive testing - Industrial radiographicilluminators - Minimum requirements

Non-destructive testing - Ultrasonic inspection -Characterization of search unit and sound field

Scaffolding Part 3: Specification for prefabricatedmobile access and working towers - (Implementationof HD 1004)

Transportable refillable welded stainless steelcylinders for low pressure gases - Alternative designand construction

Standard test method of drop shatter test for coal

Coal - Determination of forms of sulfur

Hard coal - Determination of moisture-holdingcapacity

Phosphorus deoxidized non-arsenical copper

Title

SANS 382:2007/ASTM D 1068:2005, IDT

SANS 383:2007/ASTM D 1691:2002, IDT

SANS 384:2007/ASTM D 3559:2003, IDT

SANS 385:2006

SANS 387:2008

SANS 388:2007

SANS 389:2007

SANS 390:2008

SANS 391:2004/ISO 5576:1997, IDT, Ed. 1

SANS 392:2008

SANS 393:2004/ISO 5577:2000, IDT, Ed. 1

SANS 394:2004/ISO 5579:1998, IDT, Ed. 2

SANS 395:2004/ISO 5580:1985, IDT, Ed. 1

SANS 396:2004/ISO 10375:1997, IDT, Ed. 1

SANS 398-3:2005/BS 1139-3:1994, IDT, Ed. 2

SANS 399:2005

SANS 401:2005/ASTM D440:1986, IDT

SANS 402:2005/ISO 157:1996, IDT, Ed. 2

SANS 403:2005/ISO 1018:1975, IDT, Ed. 1

SANS 404:2009

SANS Number

(SABS 385)

(SABS 387)

(SABS 388)

(SABS 389)

(SABS 390)

(SABS 392)

(SABS 404)


October 2009

2.02

1

3.02

1

1

1

1

1

2.05

3.04

2.01

2.01

5

5

1

1

1.01

1

1

Edition

Phosphorus deoxidized arsenical copper

Coal and coke - Analysis and testing - Determinationof trace elements - Guide to the determination oftrace elements

Austenitic manganese steel castings

Coal and coke - Analysis and testing - Higher rankcoal ash and coke ash - Major and minor elements -Wavelength dispersive X-ray fluorescencespectrometric method

Coal and coke - Analysis and testing - Determinationof trace elements - Coal, coke and fly-ash -Determination of eleven trace elements - Flameatomic absorption spectrometric method

Coal and coke - Analysis and testing - Determinationof trace elements - Determination of arsenic,antimony and selenium - Hydride generation method

Coal and coke - Analysis and testing - Determinationof trace elements - Determination of boron content -ICP-AES method

Coal and coke - Analysis and testing - Higher rankcoal ash and coke ash - Major and minor elements -Acid digestion/flame atomic absorptionspectrometric method

Chemical resistant gloves

Stainless steelware for medical and cateringservices in institutions

E glass fibre chopped strand mat for reinforcementof polyester and other liquid laminating systems

Canners' sucrose

The production of men's shoes (Goodyear weltedwith stitched or stuck-on outer soles)

Hospital nurses' shoes (Goodyear weltedconstruction)

Terminology work - Vocabulary Part 1: Theory andapplication

Terminology work - Vocabulary Part 2: Computerapplications

Fire performance classification of thermal insulatedbuilding envelope systems

Plain bearings - Testing under conditions ofhydrodynamic and mixed lubrication in test rigs -Guidelines

Guidelines for the selection of quality managementsystem consultants and use of their services

Title

SANS 405:2009

SANS 406:2006/AS 1038.10.0:2002, MOD

SANS 407:2008

SANS 408:2007/AS 1038.14.3:1999, MOD

SANS 409:2006/AS 1038.10.1:2003, MOD

SANS 411:2006/AS 1038.10.2:1998, MOD

SANS 412:2006/AS 1038.10.3:1988, MOD

SANS 414:2006/AS 1038.14.2:2003, MOD

SANS 416:2007

SANS 417:2006

SANS 419:2007

SANS 420:2007

SANS 421:2008

SANS 422:2008

SANS 427-1:2006/ISO 1087-1:2000, IDT, Ed. 1

SANS 427-2:2006/ISO 1087-2:2000, IDT, Ed. 1

SANS 428:2007

SANS 429:2005/ISO/TR 6281:1990, IDT, Ed. 1

SANS 430:2005/ISO 10019:2005, IDT, Ed. 1

SANS Number

(SABS 405)

(SABS 407)

(SABS 416)

(SABS 417)

(SABS 419)

(SABS 420)

(SABS 421)

(SABS 422)


October 2009

2.01

3.01

2

4.02

1

5

1

3

1

4

4.01

1

1

1

1

4.04

2.04

6.02

6

1.01

1.05

Edition

Liners and fluting for corrugated board

Indelible marking ink for textile fabrics

Barrier creams

Boiler suits and workwear suits

Information and documentation - Guidelines for thecontent, organization and presentation of indexes

Sterilized water for injections

Timber preservative - Mixture of azoles andpermethrin

White open-wove bandages

Rolling bearings - Radial bearings - Boundarydimensions, general plan

Absorbent gauze (fabric and swabs) and buttermuslin

The manufacture of soft drinks and soft drinkconcentrates

Water quality - Determination of calcium content -EDTA titrimetric method

Spirometry - Generation of acceptable andrepeatable spirograms

Non-reusable and reusable sharps containers

Water quality - Determination of the sum of calciumand magnesium - EDTA titrimetric method

Covered electrodes for the manual arc welding ofcarbon and carbon manganese steels

Corrugated board containers

Wooden poles, droppers, guardrail posts and spacerblocks Part 2: Softwood species

Wooden poles, droppers, guardrail posts and spacerblocks Part 3: Hardwood species

Tolerances permitted for the accuracy ofmeasurements of products (including prepackagedproducts) in terms of legal metrology legislation

Lime for chemical and metallurgical purposes

Title

SANS 431:2007

SANS 432:2007

SANS 433:2008

SANS 434:2008

SANS 438:2005/ISO 999:1996, IDT, Ed. 2

SANS 440:2008

SANS 441:2006

SANS 443:2006

SANS 445:2005/ISO 15:1998, IDT, Ed. 2

SANS 446:2006

SANS 449:2009

SANS 450:2005/ISO 6058:1984, IDT, Ed. 1

SANS 451:2008

SANS 452:2008

SANS 453:2005/ISO 6059:1984, IDT, Ed. 1

SANS 455:2009

SANS 456:2009

SANS 457-2:2008

SANS 457-3:2000

SANS 458:2008

SANS 459:2008

SANS Number

(SABS 431)

(SABS 432)

(SABS 433)

(SABS 434)

(SABS 440)

(SABS 443)

(SABS 446)

(SABS 449)

(SABS 455)

(SABS 456)

(SABS 457-2)

(SABS 457-3)

(SABS 459)


October 2009

4.01

1

1

1

1

3.01

3

4

1

1

1

1.01

1

1

2

1

1

1

3

1

Edition

Plain-ended solid drawn copper tubes for potablewater

Welded wire fabric gabions and gabion mattresses(Metallic-coated or polyvinyl chloride (PVC) coated)

Standard specification for denatured fuel ethanol forblending with gasolines for use as automotive spark-ignition engine fuel

Quality management systems - Guidelines forquality plans

Electronic taximeters

Breaking strength and extension at break of textilefabrics: narrow strip method using constant rate oftraverse

Absorbent cotton lint

Concrete poles for telephone, power and lightingpurposes

Rubber - Temperatures, humidities and times forconditioning and testing

Oriented Strand Boards (OSB) - Definitions,classification and specifications

Automated meter reading for large power users

Code of practice for electricity metering

Luminaires for interior lighting, streetlighting andfloodlighting - Performance requirements

Industrial trucks - Overhead guards - Specificationand testing

Powered industrial trucks and tractors - Brakeperformance and component strength

Vehicle lifts

Milk and milk products - Determination of coppercontent - Photometric method (Reference method)

Information and documentation - Archival paper -Requirements for permanence and durability

Accelerated weathering of textiles - Artificial lightand water spray exposure method

Conveyor belting - Step splicing for multi-ply textile-reinforced rubber covered conveyor belting Part 1:Hot-splicing method

Title

SANS 460:2009

SANS 462:2005/ASTM A 974:1997, IDT, Ed. 1

SANS 465:2005/ASTM D4806-04a:2004, IDT

SANS 466:2005/ISO 10005:2005, IDT, Ed. 2

SANS 467:2005/EN 50148:1995, IDT, Ed. 1

SANS 468:2007

SANS 469:2006

SANS 470:2003

SANS 471:2003/ISO 471:1995, IDT, Ed. 3

SANS 472:2006/EN 300:1997, IDT, Ed. 1

SANS 473:2006/NRS 071:2004, IDT, Ed. 1

SANS 474:2009/NRS 057:2009, IDT, Ed. 1.1

SANS 475:2006

SANS 476:2007/ISO 6055:2004, IDT, Ed. 3

SANS 477:2009/ISO 6292:2008, IDT, Ed. 2

SANS 478:2007/EN 1493:1998, IDT, Ed. 1

SANS 479:2006/ISO 5738:2004, IDT, Ed. 2

SANS 480:2006/ISO 11108:1996, IDT, Ed. 1

SANS 481:2007

SANS 484-1:2009

SANS Number

(SABS 460)

(SABS SM 468)

(SABS 469)

(SABS 470)

(SABS SM 481)


October 2009

1

1

1

1

3

2.02

3

1

1

2.01

1

3.03

4.02

1

1

2

1

1

1

1

Edition

Conveyor belting - Step splicing for multi-ply textile-reinforced rubber covered conveyor belting Part 2:Cold-splicing method

Conveyor belting - Splicing of steel cord reinforcedconveyor belting

Good Manufacturing Practice in the animal feedindustry

Disinfectant alcohol-based handrub

Wooden crutches

Protective and safety gum boots Part 1: Handmaderubber gum boots

Protective and safety gum boots Part 2: Mouldedrubber gum boots

Protective and safety gum boots Part 3: Handmaderubber ankle boots for men

Protective and safety gum boots Part 4: Mouldedrubber ankle boots for men

Steel refuse bins

Surgical medical devices used for wound closurePart 1: Sterile sutures and ligatures

Cotton duck

Glazed ceramic sanitaryware

Replacement of wheel rims for commercial vehiclesand their trailers

Steel roller chains, types S and C, attachments andsprockets

Hard coal - Determination of the crucible swellingnumber

Coal - Determination of caking power - Gray-Kingcoke test

Intelligent Transport Systems - Radio-frequencyidentification of vehicles - Parameters for uni-directional air interface communication

Specification for the elastic properties of flat, non-adhesive, extensible fabric bandages

Timber preservative - Alkaline-copper-quaternarytype

Title

SANS 484-2:2009

SANS 485:2009

SANS 489:2009

SANS 490:2008

SANS 491:1996

SANS 492-1:2002

SANS 492-2:2003

SANS 492-3:1983

SANS 492-4:1983

SANS 493:2009

SANS 494-1:2008

SANS 495:2005

SANS 497:2006

SANS 498:2007

SANS 499:2006/ISO 487:1998, IDT, Ed. 3

SANS 501:2008/ISO 501:2003, IDT, Ed. 3

SANS 502:1982/ISO 502:1982, IDT, Ed. 2

SANS 504:2008

SANS 505:2003/BS 7505:1995, MOD, Ed. 1

SANS 506:2008

SANS Number

(SABS 491)

(SABS 492-1)

(SABS 492-2)

(SABS 492-3)

(SABS 492-4)

(SABS 493)

(SABS 495)

(SABS 497)

(SABS ISO 501)

(SABS ISO 502)


October 2009

1

1

1

1

3.04

3.04

3

1

3.04

1

2.02

1

1

1

1

1

1

3

1

1

Edition

Electricity distribution - Guidelines for the provisionof electricity distribution networks in residentialareas Part 1: Planning and design of distributionnetworks

Concrete retaining blocks

Pallet trucks - Principal dimensions

Road vehicles - Brake hose assemblies for hydraulicbraking systems used with petroleum-base brakefluid

Retro-reflectors (reflex reflectors)

Immersion heaters for electric storage water heaters

Decorative paint for interior use

Coke (greater than 20 mm in size) - Determination ofmechanical strength

Hospital beds and cots

The inspection, testing and examination of towercranes

Limes for use in building

Plastics - Determination of tensile properties Part 1:General principles

Plastics - Determination of tensile properties Part 2:Test conditions for moulding and extrusion plastics

Codes for the representation of names of languagesPart 1: Alpha-2 code

Codes for the representation of names of languagesPart 2: Alpha-3 code

Codes for the representation of names of languagesPart 3: Alpha-3 code for comprehensive coverage oflanguages

Codes for the representation of names of languagesPart 5: Alpha-3 code for language families andgroups

Heat-resisting wiring cables

Information and documentation - Rules for theabbreviation of title words and titles of publications

Standard and specifications for industrial, medical,propellant, food and beverage gases, refrigerantsand breathing gases

Title

SANS 507-1:2007/NRS 034-1:2007, IDT, Ed. 4

SANS 508:2008

SANS 509:2007/ISO 509:1996, IDT, Ed. 1

SANS 510:2007/ISO 6120:1995, IDT, Ed. 2

SANS 513:2005

SANS 514:2009

SANS 515:2003

SANS 520:2007/ISO 556:1980, IDT, Ed. 1

SANS 521:2009

SANS 522:2007

SANS 523:2007

SANS 527-1:1993/ISO 527-1:1993, IDT, Ed. 1

SANS 527-2:1993/ISO 527-2:1993, IDT, Ed. 1

SANS 528-1:2007/ISO 639-1:2002, IDT, Ed. 1

SANS 528-2:2007/ISO 639-2:1998, IDT, Ed. 1

SANS 528-3:2008/ISO 639-3:2007, IDT, Ed. 1

SANS 528-5:2008/ISO 639-5:2006, IDT, Ed. 1

SANS 529:2007

SANS 531:2007/ISO 4:1997, IDT, Ed. 3

SANS 532:2009

SANS Number

(SABS 513)

(SABS 514)

(SABS 515)

(SABS 521)

(SABS 523)

(SABS ISO 527-1)

(SABS ISO 527-2)

(SABS 529)


October 2009

1

3.01

4.01

4.01

3

4

4

3.04

1

1.07

1

3.01

3.01

3.01

3.01

1

1

1

1

1

5

Edition

Vehicle security - Whole of vehicle marking Part 1:Microdot systems

Oven thermostats for electric stoves

Fibreboard products Part 1: Uncoated fibreboard

Fibreboard products Part 2: Coated fibreboard

Precast concrete paving slabs

Concrete roofing tiles

Fire hose reels (with semi-rigid hose)

Wooden doors

Destructive tests on welds in metallic materials -Bend tests

Cationic bitumen road emulsions

Shower enclosures for domestic purposes

Wooden ladders Part 1: General requirements andmethods of test

Wooden ladders Part 2: Single and extensionladders

Wooden ladders Part 3: Trestle and extensiontrestle ladders

Wooden ladders Part 4: Step-ladders, platformladders and shelf ladders

Paint-rollers including handle-frames and refills

Inflatable boats Part 1: Boats with a maximum motorpower rating of 4,5 kW

Inflatable boats Part 2: Boats with a maximum motorpower rating of 4,5 kW to 15 kW inclusive

Inflatable boats Part 3: Boats with a maximum motorpower rating of 15 kW and greater

Standard atmospheres for conditioning and/ortesting - Specifications

Unused and reclaimed mineral insulating oils fortransformers and switchgear

Title

SANS 534-1:2008/VESA ABS/002:2008, MOD, Ed. 1

SANS 537:2005

SANS 540-1:2009

SANS 540-2:2009

SANS 541:2004

SANS 542:2004

SANS 543:2004

SANS 545:2009

SANS 547:2006/ISO 5173:2000, IDT, Ed. 1

SANS 548:2003

SANS 549:2008

SANS 550-1:2003

SANS 550-2:2005

SANS 550-3:2005

SANS 550-4:2005

SANS 552:2003

SANS 553-1:2008/ISO 6185-1:2001, IDT, Ed. 1

SANS 553-2:2008/ISO 6185-2:2001, IDT, Ed. 1

SANS 553-3:2008/ISO 6185-3:2001, IDT, Ed. 1

SANS 554:1976/ISO 554:1976, IDT, Ed. 1

SANS 555:2007

SANS Number

(SABS 537)

(SABS 540-1)

(SABS 540-2)

(SABS 541)

(SABS 542)

(SABS 543)

(SABS 545)

(SABS 548)

(SABS 550-1)

(SABS 550-2)

(SABS 550-3)

(SABS 550-4)

(SABS ISO 554)

(SABS 555)


October 2009

1

1

3

4.04

1

1

1

1

1.01

1

2

1

1

1

1

2.01

1

1

1

1

Edition

Low-voltage switchgear Part 1: Circuit-breakers

Small craft - Craft identification - Coding system

Cast iron surface boxes and manhole and inspectioncovers and frames

Vitrified clay sewer pipes and fittings

Small craft - Permanently installed fuel systems andfixed fuel tanks

Small craft - Electrical systems - Extra-low-voltaged.c. installations

Canned hake (Cape cod)

Small craft - Electrical devices - Lightning-protectionsystems

Rubber insertion sheeting

Cleansing and wetting procedures for use in theassessment of the effect of cleansing and wetting onthe flammability of textile fabrics and fabricassemblies

Small craft - Liquefied petroleum gas (LPG) systems

Coke - Determination of bulk density in a smallcontainer

Small craft - Owner's manual

Open-sided passenger vehicles

Directional stability performance of vehicles in theevent of tyre failure

Wooden handles for axes

Plastics hoses - Textile-reinforced types forcompressed-air applications - Specification

Rubber hoses and hose assemblies for aircraftground fuelling and defuelling - Specification

Cranes - Limiting and indicating devices Part 2:Mobile cranes

Coke - Determination of total moisture

Title

SANS 556-1:2004

SANS 557:2008/ISO 10087:2006, IDT, Ed. 3

SANS 558:1973

SANS 559:2005

SANS 560:2008/ISO 10088:2001, IDT, Ed. 2

SANS 561:2008/ISO 10133:2000, IDT, Ed. 2

SANS 562:1956

SANS 563:2008/ISO 10134:2003, IDT, Ed. 2

SANS 564:2007

SANS 565:2003/BS 5651:1989, IDT, Ed. 1

SANS 566:2009/ISO 10239:2008, IDT, Ed. 2

SANS 567:2007/ISO 567:1995, IDT, Ed. 2

SANS 568:2008/ISO 10240:2004, IDT, Ed. 2

SANS 569:2007

SANS 570:2008

SANS 573:2008

SANS 575:2008/ISO 5774:2006, IDT, Ed. 3

SANS 576:2008/ISO 1825:1996, IDT, Ed. 2

SANS 578-2:2008/ISO 10245-2:1994, IDT, Ed. 1

SANS 579:2005/ISO 579:1999, IDT, Ed. 3

SANS Number

(SABS 558)

(SABS 559)

(SABS 562)

(SABS 564)

(SABS 573)


October 2009

1.02

3.02

1

2

3

3.01

2

4

2

1

1

5.01

5

5

5.01

1

1

1

1

1

Edition

Chloroprene rubber sheet (for waterproofing)

Semi-flexible vinyl floor tiles

Soda-lime granules (with indicator) for use duringanaesthesia for carbon dioxide absorption

The production of frozen fish, frozen marinemolluscs and frozen products derived therefrom

The production of frozen fish, marine molluscs, andproducts derived therefrom

Resin modified vinyl floor tiles

Canned fish, canned marine molluscs and cannedcrustaceans and products derived therefrom

Woollen overcoating

Hard coal - Determination of total moisture

Wood preservative mixtures containing 1) hightemperature creosote and coal tar or 2) low andmedium temperature creosote and coal tar (SANS592 and SANS 593, bound together)

Wood preservative mixtures containing 1) hightemperature creosote and coal tar or 2) low andmedium temperature creosote and coal tar (SANS592 and SANS 593, bound together)

Sterilized sodium chloride intravenous infusion

Sterilized compound sodium lactate intravenousinfusion (Ringer-lactate solution for injection)

Sterilized dextrose intravenous infusion

Sterilized sodium chloride and dextrose intravenousinfusion

Dynamometer testing for replacement brake liningassemblies and drum brake linings intended forvehicles of category M1, M2 and N1

Terms and definitions used in connection withreference materials

Reference materials - Contents of certificates andlabels

Calibration in analytical chemistry and use ofcertified reference materials

Uses of certified reference materials

Title

SANS 580:2007

SANS 581:2007

SANS 584:2008

SANS 585:1996

SANS 585:2009

SANS 586:2007

SANS 587:2005

SANS 588:2008

SANS 589:2009/ISO 589:2008, IDT, Ed. 4



SANS 595:2009

SANS 597:2008

SANS 598:2008

SANS 599:2009

SANS 601:2008

SANS 602:2007/ISO Guide 30:1992, IDT, Ed. 2




SANS Number

(SABS 580)

(SABS 581)

(SABS 585)

(SABS 585)

(SABS 586)

(SABS 587)

(SABS 588)



(SABS 595)

(SABS 597)

(SABS 598)

(SABS 599)


October 2009

1

1

1

1

1

1.01

1

1.01

1

2.02

3.02

2.02

1

1

3.01

3.01

1

2.01

1.02

4

1.01

Edition

Short-pitch transmission precision roller and bushchains, attachments and associated chain sprockets

General requirements for the competence ofreference material producers

Reference materials - General and statisticalprinciples for certification

Solid mineral fuels - Determination of carbon andhydrogen - High temperature combustion method

Code of practice for thermal insulation of pipeworkand equipment in the temperature range of -100 °Cto +870 °C

Fenestration products - Mechanical performancecriteria

Cranes - Limiting and indicating devices Part 3:Tower cranes

Wood-preserving creosote mixtures and coal-tarmixtures

Information and documentation - Holdingsstatements - Summary level

Emulsifiable cutting oil (light duty)

Castors for hospital equipment

Gypsum cove cornice

Solid mineral fuels - Vocabulary Part 2: Termsrelating to sampling, testing and analysis

Mechanical ball type couplings of diameterexceeding 50 mm

Softwood flooring boards

Decorative high gloss enamel paints

Crocodiles in captivity

Clay roofing tiles

Elastomeric structural glazing and panel gaskets

Disinfectants based on quaternary ammoniumcompounds

Wood-wool panels (cement-bonded)

Title

SANS 606:2006/ISO 606:2004, IDT, Ed. 3



SANS 609:1996/ISO 609:1996, IDT, Ed. 2

SANS 612:2007/BS 5970:2001, IDT, Ed. 3

SANS 613:2009

SANS 615-3:2009/ISO 10245-3:2008, IDT, Ed. 2

SANS 616:2008

SANS 618:2009/ISO 10324:1997, IDT, Ed. 1

SANS 619:2007

SANS 621:2005

SANS 622:2005

SANS 626-2:2007/ISO 1213-2:1992, IDT, Ed. 1

SANS 628:2008

SANS 629:2009

SANS 630:2004

SANS 631:2009

SANS 632:2007

SANS 635:2007

SANS 636:2009

SANS 637:2008

SANS Number

(SABS ISO 609)

(SABS 619)

(SABS 621)

(SABS 622)

(SABS 629)

(SABS 630)

(SABS 632)

(SABS 635)

(SABS 636)

(SABS 637)


October 2009

3

3

2

1.01

1.01

2.01

1

1

3

3.01

3

2.01

1

3.01

1.01

2

1.01

1

3.01

3.04

Edition

Food grade salt

Detergent-disinfectants based on quaternaryammonium compounds

Flexible polyurethane (polyether) foams

Flexible polyurethane (polyester) foams

Reconstituted flexible polyurethane foams

Disinfectants based on stabilized inorganic chlorinecompounds

Boot and shoe sizing and marking (Mondopointsystem)

Brown coals and lignites - Determination of theyields of tar, water, gas and coke residue by lowtemperature distillation

Toilet paper

Laundry detergent (for use in non-automaticdomestic washing machines)

Low-foam laundry detergent (for use in automaticand non-automatic domestic washing machines)

Carbon paper (Metric units)

Sound level meters

Steel tubes for non-pressure purposes Part 1:Sections for scaffolding, general engineering andstructural applications

Steel tubes for non-pressure purposes Part 2: Steeltubes for cycles

Steel tubes for non-pressure purposes Part 3: Steeltubes for rolls for conveyor belt idlers

Steel tubes for non-pressure purposes Part 4: Steeltubes of round, oval, square and rectangular sectionfor furniture

Integrating-averaging sound level meters

Lidocaine (lignocaine) hydrochloride, adrenaline(epinephrine) and noradrenaline (norepinephrine)injection for dental use

Classroom furniture

Title

SANS 638:2004/SADC HS 15:2004, IDT, Ed. 1

SANS 639:2009

SANS 640:2005

SANS 641:2007

SANS 642:2007

SANS 643:2007

SANS 644:1977

SANS 647:1974/ISO 647:1974, IDT, Ed. 1

SANS 648:1980

SANS 650:2008

SANS 651:2008

SANS 652:2007

SANS 656:2008

SANS 657-1:2005

SANS 657-2:2004

SANS 657-3:2005

SANS 657-4:2004

SANS 658:2008

SANS 659:2007

SANS 660:2009

SANS Number

(SABS 638)

(SABS 639)

(SABS 640)

(SABS 641)

(SABS 642)

(SABS 643)

(SABS 644)

(SABS ISO 647)

(SABS 648)

(SABS 650)

(SABS 651)

(SABS 652)

(SABS 657-1)

(SABS 657-2)

(SABS 657-3)

(SABS 657-4)

(SABS 659)

(SABS 660)


October 2009

1.04

5

1

1

1

4.01

1

1

1

2.01

3.01

1

4

3.03

3.03

3

3

3.02

3

5

1

Edition

Screwing taps

Cast iron gate valves for waterworks

Wedge gate and resilient seal valves for waterworksPart 1: General

Wedge gate and resilient seal valves for waterworksPart 2: Wedge gate valves

Wedge gate and resilient seal valves for waterworksPart 3: Resilient seal valves

Cast iron gate valves for general purposes

Wedge gate and resilient seal valves for generalpurposes Part 2: Wedge gate valves

Wedge gate and resilient seal valves for generalpurposes Part 3: Resilient seal valves

Ethanol-gel fuelled appliances

Wooden handles for hatchets

Mixtures of copper-chromium-arsenic compoundsfor timber preservation

Steel-reinforced spirally wound PE drainage andsewer pipes

Zinc-coated fencing wire

Reinforced concrete pressure pipes

Concrete non-pressure pipes

Primers for wood

Glazing putty for wooden and metal window frames

Undercoats for paints

Aluminium paint

Fibre-cement sheets (flat and profiled)

Inspection and testing of non-fixed load-liftingattachments

Title

SANS 662:2009

SANS 664:1999

SANS 664-1:2009

SANS 664-2:2009

SANS 664-3:2009

SANS 665:2000

SANS 665-2:2009

SANS 665-3:2009

SANS 666:2008

SANS 672:2008

SANS 673:2008

SANS 674:2008

SANS 675:2009

SANS 676:2003

SANS 677:2003

SANS 678:2005

SANS 680:2006

SANS 681:2007

SANS 682:2007

SANS 685:2006

SANS 687:2008

SANS Number

(SABS 662)

(SABS 664)

(SABS 665)

(SABS 672)

(SABS 673)

(SABS 675)

(SABS 676)

(SABS 677)

(SABS 678)

(SABS 680)

(SABS 681)

(SABS 682)

(SABS 685)


October 2009

1

1

1

2.01

1

1

1

1

1

1

1

1

2.02

1.01

1.01

2.01

1

2.02

1

1

Edition

Warp-knitted fabric for mosquito netting

Documentation - Bibliographic references - Content,form and structure

Information and documentation - Bibliographicreferences Part 2: Electronic documents or partsthereof

Wooden handles for universal type picks

Dimensions of seam welding wheel blanks

Side upper leather

Side upper leather (with a smooth corrected grain)

Cordovan and cordovan-type leathers fororthopaedic use

Vegetable-tanned side leather for orthopaedic use

Terminology work - Principles and methods

Vegetable-tanned harness and bridle leathers

Leather welting

Refrigerated farm milk tanks

Aluminium cans for milk and cream

Acid-cored solders

Primary aluminium ingots for remelting

Printed side upper leather

Unsaturated polyester (UP) resin systems

Lining leather (chrome-tanned syntan-retanned side)

Acoustics - Rating of sound insulation in buildingsand of building elements Part 1: Airborne soundinsulation

Title

SANS 688:2008

SANS 690:2007/ISO 690:1987, IDT, Ed. 2

SANS 690-2:2007/ISO 690-2:1997, IDT, Ed. 1

SANS 692:2008

SANS 693:1982/ISO 693:1982, IDT, Ed. 1

SANS 699:2009

SANS 700:2009

SANS 701:2009

SANS 702:2009

SANS 704:2004/ISO 704:2000, IDT, Ed. 2

SANS 705:2009

SANS 706:2009

SANS 708:2007

SANS 709:2007

SANS 710:2008

SANS 711:2008

SANS 712:2009

SANS 713:2007

SANS 714:2009

SANS 717-1:1996/ISO 717-1:1996, IDT, Ed. 2

SANS Number

(SABS 692)

(SABS ISO 693)

(SABS 708)

(SABS 709)

(SABS 710)

(SABS 711)

(SABS 713)

(SABS ISO 717-1)


October 2009

1

3.01

3

2.03

2.03

1

1

4

1.01

2.01

2.02

1

1

1

3.03

1

1

1

1

1

Edition

Acoustics - Rating of sound insulation in buildingsand of building elements Part 2: Impact soundinsulation

Electric welded low carbon steel pipes for aqueousfluids (large bore)

The production of infants' and children's shoes(stuck-on and stitch-down construction)

Medical trolleys (dressing/medicine; instrument;anaesthetists' dressing)

Windows and doors made from rolled mild steelsections

Automatic fire detection and alarm systems Part 8:Multi-point aspirated smoke detectors

Live aquaculture abalone

Road markings Part 1: Single-pack solvent-bornepaints

Road markings Part 2: Single-pack water-bornepaints

Boxboard (Metric units)

Cathode copper

Coal - Determination of plastic properties -Constant-torque Gieseler plastometer method

Water quality - Determination of biochemical oxygendemand after "n" days (BODn) Part 1: Dilution andseeding method for allylthiourea addition

General methods of test for pigments and extendersPart 2: Determination of matter volatile at 105 °C

Industrial boots (including safety boots) with direct-vulcanized soles and heels

Preferred numbers - Series of preferred numbers

Structural laminated veneer lumber Part 0:Specifications

Structural laminated veneer lumber Part 1: Methodof test for measurement of dimensions and shape

Structural laminated veneer lumber Part 2:Determination of structural properties - Testmethods

Structural laminated veneer lumber Part 3:Determination of structural properties - Evaluationmethods

Title

SANS 717-2:1996/ISO 717-2:1996, IDT, Ed. 2

SANS 719:2008

SANS 722:1982

SANS 726:2003

SANS 727:2003

SANS 728-8:2009/AS 1603.8:1996, IDT, Ed. 1

SANS 729:2008

SANS 731-1:2006

SANS 731-2:2006

SANS 733:2008

SANS 735:2009

SANS 737:2009/ISO 10329:2009, IDT, Ed. 1

SANS 738-1:2008/ISO 5815-1:2003, IDT, Ed. 1

SANS 740-2:2008/ISO 787-2:1981, IDT, Ed. 1

SANS 741:2006

SANS 742:2008/ISO 3:1973, IDT, Ed. 1

SANS 745-0:2008/AS/NZS 4357.0:2005, IDT, Ed. 1

SANS 745-1:2008/AS/NZS 4357.1:2005, IDT, Ed. 1

SANS 745-2:2008/AS/NZS 4357.2:2005, IDT, Ed. 1

SANS 745-3:2008/AS/NZS 4357.3:2006, IDT, Ed. 1

SANS Number

(SABS ISO 717-2)

(SABS 719)

(SABS 722)

(SABS 726)

(SABS 727)

(SABS 731-1)

(SABS 733)

(SABS 735)

(SABS 741)


October 2009

2

3.05

3.03

4.01

5

2.05

4.07

4.05

2.02

1.02

3.03

1

2.01

1

2

2

2.03

3.01

3.03

3.03

2

Edition

Cast-iron pipes and pipe fittings for use aboveground in drainage installations

Road tar binders prepared from coke oven crudes

Road tar binders prepared from Lurgi-gasificationcrudes

Interlock fabric

Burglar-resistant safes

Float valves

Pine poles, cross-arms and spacers for powerdistribution, telephone systems and street lighting

Eucalyptus poles, cross-arms and spacers for powerdistribution and telephone systems

Mineral-insulated metal-sheathed air-heating unitsfor appliances

Duplicator paper (metric units)

Sheet steel furniture

Dental alginate impression material

Plumage fillings

Assessment of inadvertent initiation of bridge wireelectro-explosive devices by radio-frequencyradiation - Guide

Earth leakage protection units Part 1: Fixed earthleakage protection circuit-breakers

Earth leakage protection units Part 2: Single-phase,portable units

Footwear laces

Copper alloy gate valves - Heavy duty

Overbed tables

Patients' trolleys

Invalid chairs

Title

SANS 746:1976

SANS 748:2002

SANS 749:2003

SANS 750:2007

SANS 751:2008

SANS 752:2007

SANS 753:2009

SANS 754:2007

SANS 755:2006

SANS 756:2008

SANS 757:2004

SANS 759:2008/ISO 1563:1990, IDT, Ed. 2

SANS 761:2008

SANS 762:2008/BS 6657:2002, IDT, Ed. 1

SANS 767-1:1982

SANS 767-2:1983

SANS 770:2009

SANS 776:2005

SANS 777:2009

SANS 778:2005

SANS 779:1972

SANS Number

(SABS 746)

(SABS 748)

(SABS 749)

(SABS 750)

(SABS 751)

(SABS 752)

(SABS 753)

(SABS 754)

(SABS 755)

(SABS 756)

(SABS 757)

(SABS 761)

(SABS 767-1)

(SABS 767-2)

(SABS 770)

(SABS 776)

(SABS 777)

(SABS 778)

(SABS 779)


October 2009

4

1

3.03

3.02

1.02

5.01

2.02

3.02

2.04

4.03

2.01

2

2

2.01

2.01

1

6.01

3.02

3.03

1.01

Edition

Distribution transformers

Design for access and mobility - Tactile indicators

Writing equipment - Ballpoint pens

Flexible vinyl flooring

Ophthalmic lenses

Unplasticized poly(vinyl chloride) (PVC-U) sewerand drain pipes and pipe fittings

Aggregates of low density

Wheelbarrows

Bituminous aluminium paint

Fibre-cement boards

Unwrought tough pitch coppers: Electrolytic toughpitch high conductivity copper

Unwrought tough pitch coppers (SANS 804,SANS805,SANS 806 and SANS 807 bound together)

Unwrought tough pitch coppers: Tough pitch highconductivity copper

Unwrought tough pitch coppers: Grade A tough pitchcopper

Unwrought tough pitch coppers: Grade B tough pitchcopper

Cable glands for use on flameproof enclosures (Exd)

Industrial body belts

Clamps for wire ropes

General purpose and aircraft hose clips (Worm-driveType)

Shoulder-ended and groove-ended piping systemsPart 1: Shoulder-ended steel pipes, fittings andcouplings

Title

SANS 780:2009

SANS 784:2008/AS/NZS 1428.4:2002, MOD

SANS 785:2006

SANS 786:2007

SANS 787:2005

SANS 791:2004

SANS 794:2009

SANS 795:2007

SANS 802:2001

SANS 803:2005

SANS 804:2008

SANS 804 TO 807 SET:1970

SANS 805:1970

SANS 806:2008

SANS 807:2008

SANS 808:1967

SANS 809:2007

SANS 813:2008

SANS 814:2009

SANS 815-1:2005

SANS Number

(SABS 780)

(SABS 785)

(SABS 786)

(SABS 787)

(SABS 791)

(SABS 794)

(SABS 795)

(SABS 802)

(SABS 803)

(SABS 804)

(SABS 805)

(SABS 806)

(SABS 807)

(SABS 808)

(SABS 809)

(SABS 813)

(SABS 814)

(SABS 815-1)


October 2009

1

3.01

3.03

3

3.01

1.02

2.01

3

1

1

1

1

1

1

1

1

1

1

2.02

2.03

Edition

Shoulder-ended and groove-ended pipe systemsPart 2: Groove-ended steel pipes, fittings andcouplings

Lidocaine (lignocaine) hydrochloride injection fordental use

Fibre-cement pipes, couplings and fittings forsewerage, drainage and low-pressure irrigation

Mild steel nails

WC flushing cisterns

Sizes of paper and envelopes

Lime for soil stabilization

Hand dishwashing and light duty detergent (liquid)

Performance standards in building - Contents andpresentation

Performance standards in building - Principles fortheir preparation and factors to be considered

Building construction - Expression of users'requirements Part 2: Air purity requirements

Building construction - Expression of users'requirements Part 3: Acoustical requirements

Information and documentation - Bibliographicdescription and references - Rules for theabbreviation of bibliographic terms

Welding and allied processes - Vocabulary Part 1:Metal welding processes

Welding and allied processes - Vocabulary Part 2:Soldering and brazing processes and related terms

Terminology work - Harmonization of concepts andterms

Dentistry - Denture base polymers

Set-top box decoder for free-to-air digital terrestrialtelevision

Ambulance stretchers

Stainless steel cutlery

Title

SANS 815-2:2004

SANS 817:2007

SANS 819:2006

SANS 820:2006

SANS 821:2007

SANS 822:2007

SANS 824:2006

SANS 825:1993

SANS 829:2009/ISO 6240:1980, IDT, Ed. 1

SANS 830:2009/ISO 6241:1984, IDT, Ed. 1

SANS 831-2:2009/ISO 6242-2:1992, IDT, Ed. 1

SANS 831-3:2009/ISO 6242-3:1992, IDT, Ed. 1

SANS 832:2007/ISO 832:1994, IDT, Ed. 2

SANS 857-1:2004/ISO 857-1:1998, IDT, Ed. 1

SANS 857-2:2007/ISO 857-2:2005, IDT, Ed. 1

SANS 860:2008/ISO 860:2007, IDT, Ed. 3

SANS 861:2008/ISO 1567:1999, IDT, Ed. 3

SANS 862:2009

SANS 865:2008

SANS 866:2006

SANS Number

(SABS 817)

(SABS 819)

(SABS 820)

(SABS 821)

(SABS 822)

(SABS 824)

(SABS 825)

(SABS 865)

(SABS 866)


October 2009

1

1

1

1.01

2

3

1

3

4.01

1

1

1

2

1

3

3.01

Edition

Compression-ignition engine systems and machinespowered by such engine systems, for use in minesand plants with explosive gas atmospheres orexplosive dust atmospheres or both Part 1-1:Hazardous locations in underground mines - Basicexplosion protected engines

Compression-ignition engine systems and machinespowered by such engine systems, for use in minesand plants with explosive gas atmospheres orexplosive dust atmospheres or both Part 1-2:Hazardous locations in underground mines -Explosion protected engine systems

Compression-ignition engine systems and machinespowered by such engine systems, for use in minesand plants with explosive gas atmospheres orexplosive dust atmospheres or both Part 1-3:Hazardous locations in underground mines -Machines

Compression-ignition engine systems and machinespowered by such engine systems, for use in minesand plants with explosive gas atmospheres orexplosive dust atmospheres or both Part 4: Non-hazardous locations in underground coal mines

Boron timber preservatives

Knitted tubular bandages

Cable terminations and live conductors within air-filled enclosures (insulation co-ordination) for rateda.c. voltages from 7,2 kV up to and including 36 kV

Woven cotton tapes

Ready-mixed concrete

Energy management - Specifications

Hard coal - Determination of caking power - Rogatest

Flexible cellular polymeric materials - Polyurethanefoam for load-bearing applications excluding carpetunderlay - Specification

Packaged meat products (processed ormanufactured)

Water quality - Enumeration of micro-organisms inwater samples - Guidance on the estimation ofvariation of results with particular reference to thecontribution of uncertainty of measurement

Varnish for interior use

Interlining

Title

SANS 868-1-1:2005

SANS 868-1-2:2005

SANS 868-1-3:2005

SANS 868-4:2005

SANS 871:2009

SANS 873:2007

SANS 876:2009/NRS 012:2009, IDT, Ed. 2

SANS 877:2007

SANS 878:2004

SANS 879:2009/DS 2403:2001, IDT, Ed. 1

SANS 881:2009

SANS 883:2009/ISO 5999:2007, IDT, Ed. 1

SANS 885:2003

SANS 886:2009/BS 8496:2007, IDT, Ed. 1

SANS 887:2005

SANS 888:2008

SANS Number

(SABS 871)

(SABS 873)

(SABS 877)

(SABS 878)

(SABS 885)

(SABS 887)

(SABS 888)


October 2009

1.02

3.01

3.01

3.02

1

2.01

2.02

2.04

3

3.01

3

3

2.03

2.01

3.02

3

3

3

3

3

Edition

Ballasts for fluorescent lamps Part 1: Ballasts forlamps for operation with starters (class A lamps)

Ballasts for fluorescent lamps Part 2: Ballasts forlamps for operation without starters (class B lamps)

Reference ballasts for class B fluorescent lamps

General purpose detergent (beads, granules andpowders)

Test Specifications for SD and HD Level IntegratedReceiver Decoders

Gas cylinder trolleys

Soiled linen carriers

Wheeled bed screens

Insecticidal space sprays in pressurized aerosoldispensers

Paint and varnish brushes (flat type)

Hessian cloth

Aluminium alloy corrugated and troughed sheets

Stainless steel wash-hand basins and wash troughs

Stainless steel sinks for institutional use

Natural fibre ropes

Springspikes for light rails

Fishplates for light rails

Coach screws for light rails

Fishbolts and nuts for light rails

Dogspikes for light rails

Title

SANS 890-1:2007

SANS 890-2:2006

SANS 891:2006

SANS 892:2003

SANS 894:2009/SEE NOTE IN STAGE 55.60:2008,IDT, Ed. 2

SANS 895:2008

SANS 896:2003

SANS 897:2008

SANS 899:1987

SANS 901:2009

SANS 902:2007

SANS 903:1978

SANS 906:2006

SANS 907:2009

SANS 911:2004

SANS 913:2007

SANS 914:2007

SANS 915:2007

SANS 916:2007

SANS 917:2007

SANS Number

(SABS 890-1)

(SABS 890-2)

(SABS 891)

(SABS 892)

(SABS 895)

(SABS 896)

(SABS 897)

(SABS 899)

(SABS 901)

(SABS 902)

(SABS 903)

(SABS 906)

(SABS 907)

(SABS 911)

(SABS 913)

(SABS 914)

(SABS 915)

(SABS 916)

(SABS 917)


October 2009

2.02

3.01

3

3.02

3.01

1

2.07

3

2.02

2.01

1.02

1

1.02

1

1.02

1.04

2.01

2.04

2.03

2.04

2

Edition

Steel bars for concrete reinforcement

Pitch-impregnated fibre pipes and fittings andjointing

Stainless steel stall urinals

Orthopaedic tubular knitted fabric

Precast concrete kerbs, edgings and channels

International terminology standards - Preparationand layout

Plywood and composite board

Processed cotton duck (560 g)

Corrugated board containers for the export of citrusfruit

Hot-dip (galvanized) zinc coatings on steel wire

Spheroidal graphite iron castings

Spheriodal graphite iron castings and austeniticspheroidal graphite iron castings

Austenitic spheroidal graphite iron castings

Austenitic spheroidal graphite iron castings

Unpolished twines

Polished twines

Emulsion roof paint

Children's, youths', and maids' school shoes withdirect injection-moulded soles and heels

Man-made fibre ropes

Support and compression bandages Part 1: Wovencrêpe bandages

Support and compression bandages Part 2: Warp-knitted bandages

Title

SANS 920:2005

SANS 921:2009

SANS 924:2003

SANS 925:2006

SANS 927:2007

SANS 928:2009/ISO 10241:1992, IDT, Ed. 1

SANS 929:2008

SANS 930:2006

SANS 933:2007

SANS 935:2007

SANS 936:2008


SANS 937:2008


SANS 938:2003

SANS 939:2008

SANS 940:2005

SANS 942:2009

SANS 943:2008

SANS 945-1:2006

SANS 945-2:2002

SANS Number

(SABS 920)

(SABS 921)

(SABS 924)

(SABS 925)

(SABS 927)

(SABS 929)

(SABS 930)

(SABS 933)

(SABS 935)

(SABS 936)


(SABS 937)


(SABS 938)

(SABS 939)

(SABS 940)

(SABS 942)

(SABS 943)

(SABS 945-1)

(SABS 945-2)


October 2009

1.02

2.02

2.02

3.01

2

1.01

1.01

1.01

3.01

1

1

1

1

1

1

4

2.02

2.01

3.01

1.04

Edition

Indoor venetian blinds

Strongroom and vault doors

Unplasticized polyvinyl chloride rigid conduit andfittings for use in electrical installations

Fire-resistant record protection equipment

Polyolefin film for damp- and waterproofing inbuildings

Storage of firearms and ammunition Part 1: Safes

Storage of firearms and ammunition Part 2:Strongrooms

Metal-arc welding equipment (non-automatic, single-operator, transformer type)

Lidocaine (lignocaine) hydrochloride and adrenaline(epinephrine) injection for dental use

Financial services - UNIversal Financial Industrymessage scheme Part 1: Overall methodology andformat specifications for inputs to and outputs fromthe ISO 20022 Repository

Financial services - UNIversal Financial Industrymessage scheme Part 2: Roles and responsibilitiesof the registration bodies

Financial services - UNIversal Financial Industrymessage scheme Part 3: ISO 20022 modellingguidelines

Financial services - UNIversal Financial Industrymessage scheme Part 4: ISO/TS 20022 XML designrules

Financial services - UNIversal Financial Industrymessage scheme Part 5: ISO 20022 reverseengineering

Road vehicles - Brake linings - Compressive straintest method

Textiles - Dimensional stability during washing anddrying procedures

Mechanical fasteners for conveyor belts Part 1:Plate-and-bolt type fasteners

Mechanical fasteners for conveyor belts Part 2:Hinged type and plate-and-rivet type fasteners

Solas life-jackets

Welded austenitic stainless steel tubes

Title

SANS 947:2007

SANS 949:2005

SANS 950:2008

SANS 951:2007

SANS 952:1985

SANS 953-1:2008

SANS 953-2:2003

SANS 954:2004

SANS 955:2007

SANS 956-1:2009/ISO 20022-1:2004, IDT, Ed. 1

SANS 956-2:2009/ISO 20022-2:2007, IDT, Ed. 2

ARP 956-3:2009/ISO/TS 20022-3:2004, IDT, Ed. 1

ARP 956-4:2009/ISO/TS 20022-4:2004, IDT, Ed. 1

ARP 956-5:2009/ISO/TS 20022-5:2004, IDT, Ed. 1

SANS 957:2009/ISO 6310:2001, IDT, Ed. 2

SANS 960:2005

SANS 962-1:2009

SANS 962-2:2006

SANS 964:2008

SANS 965:2008

SANS Number

(SABS 947)

(SABS 949)

(SABS 950)

(SABS 951)

(SABS 952)

(SABS 953-1)

(SABS 953-2)

(SABS 954)

(SABS 955)

(SABS SM 960)

(SABS 962-1)

(SABS 962-2)

(SABS 964)

(SABS 965)


October 2009

3.04

1.05

2.03

3

2.03

2.03

2

1.01

1.01

1

2

2.03

3.01

3.03

3.01

1

1

1

2.02

2.02

Edition

Components of pressure pipe systems Part 1:Unplasticized poly(vinyl chloride) (PVC-U) pressurepipe systems

Components of pressure pipe systems Part 2:Modified poly(vinyl chloride)(PVC-M) pressure pipesystems

Unplasticized poly(vinyl chloride) (PVC-U) soil,waste and vent pipes and pipe fittings

Fire-retardant textile-reinforced conveyor belting (foruse in fiery mines)

Signs for street and property identification Part 1:Retro-reflective signs

Signs for street and property identification Part 2:Non-retro-reflective signs

Rubber joint rings (non-cellular) Part 1: Joint ringsfor use in water, sewer and drainage systems

Rubber joint rings (non-cellular) Part 2: Joint ringsfor use in the dairy industry

Rubber joint rings (non-cellular) Part 3: Joint ringsfor use in pressure cookers

Prestressed concrete pipes

Textile tolerances

High-pressure down-draught steam sterilizers(autoclaves) (with independent steam supply)

High-pressure high-vacuum steam sterilizers(autoclaves)

Polyester-and-wool uniform fabrics

Precast reinforced concrete culverts

Business process outsourcing and offshoringoperations Part 1: Outbound contact centreoperations

Business process outsourcing and offshoringoperations Part 2: Inbound contact centre operations

Business process outsourcing and offshoringoperations Part 3: Back-office processing operations

Aluminium and aluminium alloy sand castings andgravity die castings

Aluminium and aluminium alloy pressure diecastings

Title

SANS 966-1:2008

SANS 966-2:2008

SANS 967:2004

SANS 971:2003

SANS 972-1:2005

SANS 972-2:2004

SANS 974-1:1986/ISO 4633:1983, NEQ

SANS 974-2:2007

SANS 974-3:2009

SANS 975:1970

SANS 977:2003

SANS 981:2009

SANS 982:2009

SANS 985:2008

SANS 986:2006

SANS 990-1:2008

SANS 990-2:2008

SANS 990-3:2008

SANS 991:2008

SANS 992:2008

SANS Number

(SABS 966-1)

(SABS 966-2)

(SABS 967)

(SABS 971)

(SABS 972-1)

(SABS 972-2)

(SABS 974-1)

(SABS 974-2)

(SABS 974-3)

(SABS 975)

(SABS 977)

(SABS 981)

(SABS 982)

(SABS 985)

(SABS 986)

(SABS 991)

(SABS 992)


October 2009

1

2

3.01

1.02

3.01

1.03

1.03

2.01

2.01

2.05

1.02

2.01

3.01

1.02

1.03

1

1.02

1.04

1.03

2.05

2

Edition

Modular co-ordination in building

Chamois leathers

Car radio receivers

Stainless steelware for domestic and general use

Anodized coatings on aluminium (for architecturalapplications)

Semi-vitreous crockery (domestic ware)

Semi-vitreous crockery (hotel ware)

Fine china and vitrified tableware for domestic use

Fine china and vitrified tableware for non-domesticuse

Innerspring mattresses

Plastic floats for ball valves

Warp-knitted pocketing

Bunting

Shapes, sizes, and marking of grinding wheels

Electric light dimmers (Metric units)

Coke - Determination of true relative density,apparent relative density and porosity

Fire resisting door units for record rooms

Electric cables for motor vehicles - Low-voltagecables and flexible earthing straps for motor vehicles

Electric cables for motor vehicles - Ignition cablesfor motor vehicles

Standard voltages, currents and insulation levels forelectricity supply

Power-operated dispensing devices for flammableliquid fuels

Title

SANS 993:1972

SANS 995:1990

SANS 996:2008

SANS 998:2006

SANS 999:2007

SANS 1001:2004

SANS 1002:2006

SANS 1003:2006

SANS 1004:2006

SANS 1005:2009

SANS 1006:2007

SANS 1008:2007

SANS 1010:2007

SANS 1011:2007

SANS 1012:2006

SANS 1014:1985/ISO 1014:1985, IDT, Ed. 2

SANS 1015:2008

SANS 1017:2008

SANS 1018:2007

SANS 1019:2008

SANS 1020:2003

SANS Number

(SABS 993)

(SABS 995)

(SABS 996)

(SABS 998)

(SABS 999)

(SABS 1001)

(SABS 1002)

(SABS 1003)

(SABS 1004)

(SABS 1005)

(SABS 1006)

(SABS 1008)

(SABS 1010)

(SABS 1011)

(SABS 1012)

(SABS ISO 1014)

(SABS 1015)

(SABS 1017)

(SABS 1018)

(SABS 1019)

(SABS 1020)


October 2009

3.01

2.01

2.01

1.03

1.01

1.01

2.02

2

1.03

1.01

1

1.03

2.01

1.03

2.02

2.01

1.05

2

3

3

Edition

Water taps (plastic bodies)

Metal roofing tiles

Welded steel fabric for reinforcement of concrete

Bench vices for metal work (Metric units)

Woodworkers' vices

Pipe wrenches (Metric units)

Miniature substations

Detergent-disinfectants based on stabilizedinorganic chlorine compounds

Solid filler wire for the submerged arc welding ofmild steel and medium high tensile steel (metricunits)

Grey iron castings

Rubber, vulcanized or thermoplastic - Determinationof adhesion to textile fabric

Standard transformer bushings

Cotton eyelet fabric

Wooden ceiling and panelling boards

Pressure cookers for domestic use

Tubular fluorescent lamps for general service

Polymer floor dressings

The manufacture of sanitary towels

Industrial laundry detergents

Motor vehicle safety: Lights and light-signallingdevices installed on motor vehicles and trailers

Title

SANS 1021:2007

SANS 1022:2009

SANS 1024:2006

SANS 1026:2008

SANS 1027:2008

SANS 1028:2008

SANS 1029:2008

SANS 1032:2001

SANS 1033:2003

SANS 1034:2008

SANS 1036:2004/ISO 36:1999, IDT, Ed. 3

SANS 1037:2008

SANS 1038:2007

SANS 1039:2008

SANS 1040:2004

SANS 1041:2004

SANS 1042:2006

SANS 1043:1985

SANS 1044:2009

SANS 1046:1990/76/756/EEC:1976, MOD;80/233/EEC:1980, MOD; 82/244/EEC:1982, MOD;83/276/EEC:1983, MOD; 84/8/EEC:1984, MOD;89/278/EEC:1989, MOD; ECE R48:1983, MOD

SANS Number

(SABS 1021)

(SABS 1022)

(SABS 1024)

(SABS 1026)

(SABS 1027)

(SABS 1028)

(SABS 1029)

(SABS 1032)

(SABS 1033)

(SABS 1034)

(SABS 1037)

(SABS 1038)

(SABS 1039)

(SABS 1040)

(SABS 1041)

(SABS 1042)

(SABS 1043)

(SABS 1044)

(SABS 1046)


October 2009

2.02

2.01

2.01

2.01

2.01

2.01

1.01

2.01

1.03

2.01

2.02

1.04

1.02

1

3

2.01

2.01

1.03

2

1.02

Edition

Motor vehicle safety specification: Interior fittings(passenger cars) (Incorporating EEC Directive 74/60"Interior fittings of motor vehicles" and the amendingEEC Directive 78/632, with modifications)

Braking Part 1: General

Braking Part 2: Response time of braking devices onvehicles fitted with compressed-air braking devices

Braking Part 3: Energy sources and reservoirs

Braking Part 4: Spring brakes

Braking Part 5: Parking brakes: Mechanically lockedbrake cylinder (lock actuator) type

Braking Part 6: Distribution of braking effort andcompatibility of vehicles in combination

Rear underrun protection devices

Ballvalves Part 1: Fire-safe valves

Ball valves Part 2: Heavy duty valves (not fire-safe)

Ball valves Part 3: Light duty valves (not fire-safe)

Concrete paving blocks

Wheelchairs (folding type)

Pressure and vacuum gauges

Earth rods, couplers and connections

Copper-based fittings for copper tubes Part 1:Compression fittings

Copper-based fittings for copper tubes Part 2:Capillary solder fittings

Coats and jackets (protective, unlined)

Welding consumables - Covered electrodes, wires,rods and tubular cored electrodes for fusion weldingof cast iron - Classification

Sealing compounds for the building and constructionindustry, two-component, polyurethane-base

Title

SANS 1047:2006/74/60/EEC:1974, MOD, Ed. 1;78/632/EEC:1978, MOD, Ed. 1

SANS 1051-1:2006/ECE R13:1980, MOD

SANS 1051-2:2006/ECE R13:1980, MOD

SANS 1051-3:2006/ECE R13:1980, MOD

SANS 1051-4:2006/ECE R13:1980, MOD

SANS 1051-5:2006/ECE R13:1980, MOD

SANS 1051-6:2006/ECE R13:1980, MOD

SANS 1055:2007

SANS 1056-1:2008

SANS 1056-2:2006

SANS 1056-3:2009

SANS 1058:2006

SANS 1060:2003

SANS 1062:1985

SANS 1063:2008

SANS 1067-1:2005

SANS 1067-2:2005

SANS 1068:2008

SANS 1071:2005/ISO 1071:2003, IDT, Ed. 2

SANS 1077:2009

SANS Number

(SABS 1047)

(SABS SV 1051-1)

(SABS SV 1051-2)

(SABS SV 1051-3)

(SABS SV 1051-4)

(SABS SV 1051-5)

(SABS SV 1051-6)

(SABS 1055)

(SABS 1056-1)

(SABS 1056-2)

(SABS 1056-3)

(SABS 1058)

(SABS 1060)

(SABS 1062)

(SABS 1063)

(SABS 1067-1)

(SABS 1067-2)

(SABS 1068)

(SABS ISO 1071)

(SABS 1077)


October 2009

1.01

2

2

2.02

3.03

1.01

1.02

2.02

2

3.01

4

1.05

1.01

1.03

3

3

1.07

1.05

1.01

1.01

Edition

Restraining devices (safety belts) for occupants ofadult build in motor vehicles (Revised requirements)

Detergent-disinfectants based on iodophors

Detergent-disinfectants based on phenolics

Aggregates from natural sources - Aggregates forconcrete

Wall outlet boxes for the enclosure of electricalaccessories

Flexible poly(vinyl chloride) (PVC) pressure hose

Luminaire entries and spigots

Aggregates from natural sources - Fine aggregatesfor plaster and mortar

National colour standard

Breaking strength and extension at break of textilefabrics - Strip method using constant rate of load

Dimensional changes in textile fabrics caused byimmersion in cold water

Hardwood furniture timber

Industrial laminated sheets based on phenolic resin

Glass test tubes

Pipe threads where pressure-tight joints are madeon the threads Part 1: Dimensions, tolerances anddesignation

Pipe threads where pressure-tight joints are madeon the threads Part 2: Verification by means of limitgauges

Screwdrivers for slotted-head screws

Coal-burning appliances (reduced smoke emissiontype)

Open-end, box, and combination wrenches

Hand-operated, square-drive socket wrenches

Title

SANS 1080:2002/77/541/EEC:1977, MOD;81/576/EEC:1981, MOD; 82/319/EEC:1982, MOD

SANS 1081:2001

SANS 1082:2001

SANS 1083:2006

SANS 1085:2004

SANS 1086:2007

SANS 1088:2004

SANS 1090:2009

SANS 1091:2004

SANS 1092:2007

SANS 1097:2005

SANS 1099:2008

SANS 1100:2009

SANS 1108:2005

SANS 1109-1:2005/ISO 7-1:1994, IDT, Ed. 3

SANS 1109-2:2005/ISO 7-2:2000, IDT, Ed. 2

SANS 1110:2008

SANS 1111:2008

SANS 1112:2008

SANS 1113:2006

SANS Number

(SABS 1080)

(SABS 1081)

(SABS 1082)

(SABS 1083)

(SABS 1085)

(SABS 1086)

(SABS 1088)

(SABS 1090)

(SABS 1091)

(SABS SM 92)

(SABS SM 97)

(SABS 1099)

(SABS 1100)

(SABS 1108)

(SABS 1109-1)

(SABS 1109-2)

(SABS 1110)

(SABS 1111)

(SABS 1112)

(SABS 1113)


October 2009

3.03

1.02

3

3

5

3

5

3

1.02

3.02

2.04

3.03

3.02

3.03

3.03

1.03

1.04

1.04

1.03

1.04

2.01

Edition

Industrial boots (including safety boots) with stuck-on pre-moulded or direct-injection-moulded solesand heels

Cast iron gratings for gullies and stormwater drains

Retro-reflective number plates for motor vehiclesPart 1: Blank plates (aluminium)

Retro-reflective number plates for motor vehiclesPart 2: Metal

Retro-reflective number plates for motor vehiclesPart 2: Number plates (aluminium)

Retro-reflective number plates for motor vehiclesPart 3: Blank plates (plastics)

Retro-reflective number plates for motor vehiclesPart 4: Number plates (plastics)

Retro-reflective number plates for motor vehiclesPart 4: Plastics

Plastics wrappings for the protection of steelpipelines

School clothing Part 1: General requirements forschool clothing

School clothing Part 2: Blazers

School clothing Part 3: Trousers and shorts

School clothing Part 4: Shirts

School clothing Part 6: Dresses, tunics and gyms

School clothing Part 7: Girls' slacks and skirts

School clothing Part 9: Knee-high stockings andankle socks

School clothing Part 10: Jerseys and cardigans

School clothing Part 11: Briefs

School clothing Part 12: Tracksuits

School clothing Part 13: Athletic wear

Pliers and nippers

Title

SANS 1114:2006

SANS 1115:2007

SANS 1116-1:2008

SANS 1116-2:2003

SANS 1116-2:2008

SANS 1116-3:2008

SANS 1116-4:2008

SANS 1116-4:2003

SANS 1117:2007

SANS 1118-1:2003

SANS 1118-2:2004

SANS 1118-3:2008

SANS 1118-4:2008

SANS 1118-6:2008

SANS 1118-7:2008

SANS 1118-9:2008

SANS 1118-10:2008

SANS 1118-11:2008

SANS 1118-12:2008

SANS 1118-13:2008

SANS 1120:2008

SANS Number

(SABS 1114)

(SABS 1115)

(SABS 1116-1)

(SABS 1116-2)

(SABS 1116-2)

(SABS 1116-3)

(SABS 1116-4)

(SABS 1116-4)

(SABS 1117)

(SABS 1118-1)

(SABS 1118-2)

(SABS 1118-3)

(SABS 1118-4)

(SABS 1118-6)

(SABS 1118-7)

(SABS 1118-9)

(SABS 1118-10)

(SABS 1118-11)

(SABS 1118-12)

(SABS 1118-13)

(SABS 1120)


October 2009

3.01

3

3

2.03

2

2

2

2

1.04

1.04

2

2

1

2.01

2

2.01

1.01

1.01

2.03

3.01

1.03

Edition

Pipe flanges

Syringes and needles (sterile-packed for single use)Part 1: Injection needles

Syringes and needles (sterile-packed for single use)Part 2: Syringes

Room air conditioners and heat pumps

Mechanical jacks

Algaecides for use in freshwater swimming pools

Firefighting equipment Part 1: Components ofunderground and above-ground hydrant systems

Firefighting equipment Part 2: Hose couplings,connectors and branch pipe and nozzle connections

Steel door frames

Fibre reinforcing material for pipe wrapping

Rubber, vulcanized or thermoplastic - Determinationof flex cracking and crack growth (De Mattia)

Plastics - Determination of the melt mass-flow rate(MFR) and the melt volume-flow rate (MVR) ofthermoplastics

Diesel engines modified for use in hazardouslocations (other than in mines)

Mushroom- and countersunk-head bolts and nuts

Hydraulic trolley jacks

Castor and icing sugars for household andconfectionery use

Leather school bags and school brief-cases

Wooden safety matches

Glass-reinforced polyester (GRP) laminated sheets(profiled or flat)

Portable rechargeable fire extinguishers -Halogenated hydrocarbon type extinguishers

Metal-working chisels for hand use

Title

SANS 1123:2007

SANS 1124-1:1998

SANS 1124-2:1998

SANS 1125:2004

SANS 1126:2007

SANS 1127:2007

SANS 1128-1:2008

SANS 1128-2:2008

SANS 1129:2008

SANS 1130:2008

SANS 1132:2009/ISO 132:2005, IDT, Ed. 4

SANS 1133:2008/ISO 1133:2005, IDT, Ed. 4

SANS 1142:1979

SANS 1143:2008

SANS 1144:2007

SANS 1145:2007

SANS 1147:2001

SANS 1148:2008

SANS 1150:2007

SANS 1151:2005

SANS 1152:2008

SANS Number

(SABS 1123)

(SABS 1124-1)

(SABS 1124-2)

(SABS 1125)

(SABS 1126)

(SABS 1127)

(SABS 1128-1)

(SABS 1128-2)

(SABS 1129)

(SABS 1130)

(SABS ISO 1133)

(SABS 1142)

(SABS 1143)

(SABS 1144)

(SABS 1145)

(SABS 1147)

(SABS 1148)

(SABS 1150)

(SABS 1151)

(SABS 1152)


October 2009

1.02

1.02

2

1

2

3.03

3.03

1.01

1.03

2.02

1.04

2.01

2.01

1.01

2

2

1.02

1

1.03

2.01

Edition

Hose for liquefied petroleum gas (LPG) Part 1: Hoseused in road and rail transport

Hose for liquefied petroleum gas (LPG) Part 2: Hoseand tubing for use in LPG vapour phase and LPG-airinstallations

The production of pre-cooked frozen foodscontaining protein

Detergent for domestic dishwashing machines

Syringes with or without needles for the injection ofinsulin (sterile-packed for single use)

Industrial shoes (including safety shoes) with stuck-on pre-moulded or direct-injection-moulded solesand heels

Industrial shoes (including safety shoes) with direct-vulcanized soles and heels

Temporary stands

Linear alkylbenzenesulphonic acid

Metal screws for wood

Files and rasps

General purpose textile-reinforced conveyor belting

Bains-marie and hot cupboards

High speed steel slitting saws

Self-supporting plastics containers of nominalcapacities 5 l to 220 l

Terry jacquard articles

The production of lined and coated steel pipes usingbitumen or coal tar enamel

Wet blue chrome-tanned hides

Light gauge welded steel pipes

Nurses' woven uniform fabric (polyester-and-cotton)

Title

SANS 1156-1:2007

SANS 1156-2:2007

SANS 1159:2003

SANS 1163:1977

SANS 1166:2006

SANS 1167:2006

SANS 1168:2006

SANS 1169:2008

SANS 1170:2008

SANS 1171:2006

SANS 1172:2008

SANS 1173:2006

SANS 1174:2005

SANS 1175:2008

SANS 1176:1994

SANS 1177:2007

SANS 1178:2002

SANS 1179:1977

SANS 1182:2009

SANS 1183:2008

SANS Number

(SABS 1156-1)

(SABS 1156-2)

(SABS 1159)

(SABS 1163)

(SABS 1166)

(SABS 1167)

(SABS 1168)

(SABS 1169)

(SABS 1170)

(SABS 1171)

(SABS 1172)

(SABS 1173)

(SABS 1174)

(SABS 1175)

(SABS 1176)

(SABS 1177)

(SABS 1178)

(SABS 1179)

(SABS 1182)

(SABS 1183)


October 2009

3.05

1.02

1.02

1.02

1.03

2.01

1

1.01

1.05

1.03

2

2

1.02

3

2

2.02

3

3

3

2

3

Edition

Symbolic safety signs Part 1: Standard signs andgeneral requirements

Symbolic safety signs Part 2: Self-luminous(radioluminescent) signs

Symbolic safety signs Part 3: Internally illuminatedsigns

Symbolic safety signs Part 4: Retro-reflective signs

Symbolic safety signs Part 5: Photoluminescentsigns

Tanks and ancillary equipment for milk tankers

Production of single-use hypodermic needles(sterile-packed) for dental cartridge syringes

Malleable iron castings

High penetration-resistant laminated safety glass forvehicles

Laminated safety glass for vehicles

Toughened safety glass for vehicles

Nylon tubing for air-brake applications

Busbars

Detergent-disinfectants based on organic halogencompounds (other than iodine compounds)

The manufacture of rubber sheeting for rubber lining

The production of mageu

Standardized specification for civil engineeringconstruction Section A: General

Standardized specification for civil engineeringconstruction Section AA: General (small works)

Standardized specification for civil engineeringconstruction Section AB: Engineer's office

Standardized specification for civil engineeringconstruction Section AD: General (Small dams)

Standardized specification for civil engineeringconstruction Section AH: General (structural)

Title

SANS 1186-1:2008

SANS 1186-2:2007

SANS 1186-3:2004

SANS 1186-4:2008

SANS 1186-5:2006

SANS 1187:2008

SANS 1188:1978

SANS 1190:2009

SANS 1191:2005

SANS 1192:2005

SANS 1193:2008

SANS 1194:2006

SANS 1195:2008

SANS 1196:2009

SANS 1198:2005

SANS 1199:2007

SANS 1200 A:1986

SANS 1200 AA:1986

SANS 1200 AB:1986

SANS 1200 AD:1986

SANS 1200 AH:1986

SANS Number

(SABS 1186-1)

(SABS 1186-2)

(SABS 1186-3)

(SABS 1186-4)

(SABS 1186-5)

(SABS 1187)

(SABS 1188)

(SABS 1190)

(SABS 1191)

(SABS 1192)

(SABS 1193)

(SABS 1194)

(SABS 1195)

(SABS 1196)

(SABS 1198)

(SABS 1199)

(SABS 1200 A)

(SABS 1200 AA)

(SABS 1200 AB)

(SABS 1200 AD)

(SABS 1200 AH)


October 2009

1

3

3

3

1

3

1

2

1

1

2

1

1

1

3

2

1

1

1

2

Edition

Standardized specification for civil engineeringconstruction Section C: Site clearance

Standardized specification for civil engineeringconstruction Section D: Earthworks

Standardized specification for civil engineeringconstruction Section DA: Earthworks (small works)

Standardized specification for civil engineeringconstruction Section DB: Earthworks (pipe trenches)

Standardized specification for civil engineeringconstrucion Section DE: Small earth dams

Standardized specification for civil engineeringconstruction Section DK: Gabions and pitching

Standardized specification for civil engineeringconstruction Section DM: Earthworks (roads,subgrade)

Standardized specification for civil engineeringconstruction Section DN: Earthworks (railwaysidings)

Standardized specification for civil engineeringconstruction Section F: Piling

Standardized specification for civil engineeringconstruction Section G: Concrete (structural)

Standardized specification for civil engineeringconstruction Section GA: Concrete (small works)

Standardized specification for civil engineeringconstruction Section GB: Concrete (ordinarybuildings)

Standardized specification for civil engineeringconstruction Section GE: Precast concrete(structural)

Standardized specification for civil engineeringconstruction Section GF: Prestressed concrete

Standardized specification for civil engineeringconstruction Section H: Structural steelwork

Standardized specification for civil engineeringconstruction Section HA: Structural steelwork(sundry items)

Standardized specification for civil engineeringconstruction Section HB: Cladding and sheeting

Standardized specification for civil engineeringconstruction Section HC: Corrosion protection ofstructural steelwork

Standardized specification for civil engineeringconstruction Section HE: Structural aluminiumwork

Standardized specification for civil engineeringconstruction Section L: Medium-pressure pipe lines

Title

SANS 1200 C:1980

SANS 1200 D:1988

SANS 1200 DA:1988

SANS 1200 DB:1989

SANS 1200 DE:1984

SANS 1200 DK:1996

SANS 1200 DM:1981

SANS 1200 DN:1982

SANS 1200 F:1983

SANS 1200 G:1982

SANS 1200 GA:1982

SANS 1200 GB:1984

SANS 1200 GE:1984

SANS 1200 GF:1984

SANS 1200 H:1990

SANS 1200 HA:1990

SANS 1200 HB:1985

SANS 1200 HC:1988

SANS 1200 HE:1983

SANS 1200 L:1983

SANS Number

(SABS 1200 C)

(SABS 1200 D)

(SABS 1200 DA)

(SABS 1200 DB)

(SABS 1200 DE)

(SABS 1200 DK)

(SABS 1200 DM)

(SABS 1200 DN)

(SABS 1200 F)

(SABS 1200 G)

(SABS 1200 GA)

(SABS 1200 GB)

(SABS 1200 GE)

(SABS 1200 GF)

(SABS 1200 H)

(SABS 1200 HA)

(SABS 1200 HB)

(SABS 1200 HC)

(SABS 1200 HE)

(SABS 1200 L)


October 2009

2

1

2

2

1

1

2

1

1

1

2

3

1

1

1

1

1

1

1.04

1.01

Edition

Standardized specification for civil engineeringconstruction Section LB: Bedding (pipes)

Standardized specification for civil engineeringconstruction Section LC: Cable ducts

Standardized specification for civil engineeringconstruction Section LD: Sewers

Standardized specification for civil engineeringconstruction Section LE: Stormwater drainage

Standardized specification for civil engineeringconstruction Section LF: Erf connections (water)

Standardized specification for civil engineeringconstruction Section LG: Pipe jacking

Standardized specifications for civil engineeringconstruction Section M: Roads (general)

Standardized specification for civil engineeringconstruction Section ME: Subbase

Standardized specification for civil engineeringconstruction Section MFL: Base (light pavementstructures)

Standardized specification for civil engineeringconstruction Section MF: Base

Civil engineering construction Section MG:Bituminous surface treatment

Civil engineering construction Section MH: Asphaltbase and surfacing

Standardized specification for civil engineeringconstruction Section MJ: Segmented paving

Standardized specification for civil engineeringconstruction Section MK: Kerbing and channelling

Standardized specification for civil engineeringconstruction Section MM: Ancillary roadworks

Standardized specification for civil engineeringconstruction Section NB: Railway sidings (trackwork)

The application of rubber linings to pipes, pipefittings and vessels

Rolling bearings - Needle roller bearings, dimensionseries 48, 49 and 69 - Boundary dimensions andtolerances

Braking

Pipe holderbats

Title

SANS 1200 LB:1983

SANS 1200 LC:1981

SANS 1200 LD:1982

SANS 1200 LE:1982

SANS 1200 LF:1983

SANS 1200 LG:1983

SANS 1200 M:1996

SANS 1200 ME:1981

SANS 1200 MFL:1996

SANS 1200 MF:1981

SANS 1200 MG:1996

SANS 1200 MH:1996

SANS 1200 MJ:1984

SANS 1200 MK:1983

SANS 1200 MM:1984

SANS 1200 NB:1981

SANS 1201:2005

SANS 1206:2005/ISO 1206:2001, IDT, Ed. 3

SANS 1207:1998/71/320/EEC:1971, MOD;74/132/EEC:1974, MOD; 75/524/EEC:1975, MOD;79/489/EEC:1979, MOD; ECE R13,REV 3:9999,MOD

SANS 1209:2008

SANS Number

(SABS 1200 LB)

(SABS 1200 LC)

(SABS 1200 LD)

(SABS 1200 LE)

(SABS 1200 LF)

(SABS 1200 LG)

(SABS 1200 M)

(SABS 1200 ME)

(SABS 1200 MFL)

(SABS 1200 MF)

(SABS 1200 MG)

(SABS 1200 MH)

(SABS 1200 MJ)

(SABS 1200 MK)

(SABS 1200 MM)

(SABS 1200 NB)

(SABS 1207)

(SABS 1209)


October 2009

1.01

1.02

2.04

1.04

1.04

2.02

1.03

1.05

1.05

2

2.01

1.03

1

1.04

2.01

2

2

2

1.02

1.01

3.01

Edition

Hexagon wrench keys

Adjustable wrenches

The National Flag

Mechanical cable glands

Concrete masonry units

Solvent-emulsion degreasers

The production of painted and powder-coated steelpipes

Hydraulic oil (anti-wear type)

Hand hacksaw blades

Detergent skin cleansers

Fibre-cement pressure pipes and couplings

Polish stripper

Ammoniated liquid detergent cleaner

Textured wall coatings, emulsion base, for interiorand exterior use

Abrasion-resistant polymeric gloves: Lined type

The production of half-concentrated Darrow'ssolution with dextrose for injections

The production of sodium bicarbonate injections ofvarious strengths

The production of a balanced solution of electrolytesfor injection

Borehole cylinders

Silvered glass mirrors for general use

Single-stage regulators for liquefied petroleum gas(LPG)

Title

SANS 1210:2007

SANS 1211:2007

SANS 1212:2005

SANS 1213:2002

SANS 1215:2008

SANS 1216:2002

SANS 1217:2001

SANS 1218:2008

SANS 1219:2007

SANS 1221:2000

SANS 1223:2003

SANS 1224:2006

SANS 1225:1985

SANS 1227:2005

SANS 1228:2009

SANS 1231:1993

SANS 1232:1993

SANS 1233:1993

SANS 1235:2007

SANS 1236:2005

SANS 1237:2007

SANS Number

(SABS 1210)

(SABS 1211)

(SABS 1212)

(SABS 1213)

(SABS 1215)

(SABS 1216)

(SABS 1217)

(SABS 1218)

(SABS 1219)

(SABS 1221)

(SABS 1223)

(SABS 1224)

(SABS 1225)

(SABS 1227)

(SABS 1228)

(SABS 1231)

(SABS 1232)

(SABS 1233)

(SABS 1235)

(SABS 1236)

(SABS 1237)


October 2009

2

2.02

2.01

2

2.02

3

1

1

1.01

2.04

2

2.01

3

2

1.01

1.01

2.01

2.01

2.01

3.01

Edition

Air-conditioning ductwork

Plugs, socket-outlets and couplers for industrialpurposes

Automatic shut-off flush valves for water closets andurinals

Aluminium sulfate for general purposes

Pantihose and knee-highs

Pressurized paraffin-fuelled appliances

Tubular steel framed chairs and stools

Aluminium pigments for paints

Devices to prevent the unauthorized use of motorvehicles (anti-theft devices)

Knitted uniform fabrics

Engine cooling system protectors

Passive antennas for the reception of VHF and UHFtelevision and VHF sound transmissions

Fire-doors and fire-shutters

Oven cleaner and grease remover

Dental casting gold alloys

Invert bitumen emulsion

Performance requirements for retail textiles Part 1:Household piece-goods and articles

Performance requirements for retail textiles Part 2:Piece-goods for women's and girls' wear

Performance requirements for retail textiles Part 3:Piece-goods for men's and boys' wear

Safety and security glazing materials for buildingsPart 1: Safety performance of glazing materialsunder human impact

Title

SANS 1238:2005

SANS 1239:2004

SANS 1240:2006

SANS 1241:2008

SANS 1242:2008

SANS 1243:2007

SANS 1244:1979

SANS 1247:2005/ISO 1247:1974, IDT, Ed. 1

SANS 1248:1988

SANS 1249:2007

SANS 1251:2005

SANS 1252:2004

SANS 1253:2003

SANS 1255:2009

SANS 1259:2008

SANS 1260:2004

SANS 1261-1:2008

SANS 1261-2:2008

SANS 1261-3:2008

SANS 1263-1:2006

SANS Number

(SABS 1238)

(SABS 1239)

(SABS 1240)

(SABS 1241)

(SABS 1242)

(SABS 1243)

(SABS 1244)

(SABS 1248)

(SABS 1249)

(SABS 1251)

(SABS 1252)

(SABS 1253)

(SABS 1255)

(SABS 1259)

(SABS 1260)

(SABS 1263-1)


October 2009

1.01

1.02

1.03

2.04

1.01

3.01

3

2

1

2

1

1.02

1.04

1.04

1.03

1.01

1.01

3.02

1.01

2.01

Edition

Safety and security glazing materials for buildingsPart 2: Burglar-resistant and vandal-resistant glazingmaterials

Safety and security glazing materials for buildingsPart 3: Bullet-resistant glazing materials

Waxy oil obtained from the synthol process and fromother petroleum sources

Ballasts for discharge lamps (excluding tubularfluorescent lamps)

Motor vehicle safety: Head restraints (passengercars)

General requirements for woven textile piece-goodsand household articles

Mepivacaine hydrochloride injection for dental use

Military webbing

Fasteners for roof and wall coverings in the form ofsheeting

Coatings applied by the powder-coating process

Double-pitch precision roller chains and sprocketsfor transmission and conveyors

Rinse aid for use in dishwashing machines

Modified poly(vinyl chloride) (PVC-M) pressure pipeand couplings for cold water services inunderground mining

Bow-saw frames and blades

Woodworking saws for hand use

Ventilation brattices and ducting Part 1: Flexibleducting

Ventilation brattices and ducting Part 2: Brattices,unsupported

Preservative-treated timber

Flexible polyurethane foam sleeping mats andmattresses Part 1: Mats and mattresses havingunsupported polymeric covers

Flexible polyurethane foam sleeping mats andmattresses Part 2: Foam mattresses for domesticand hotel use

Title

SANS 1263-2:2007

SANS 1263-3:2007

SANS 1265:2009

SANS 1266:2007

SANS 1269:2002/78/932/EEC:1978, MOD

SANS 1270:2007

SANS 1271:1999

SANS 1272:2007

SANS 1273:1979

SANS 1274:2005

SANS 1275:2006/ISO 1275:1995, IDT, Ed. 3

SANS 1281:2004

SANS 1283:2008

SANS 1284:2007

SANS 1285:2007

SANS 1287-1:2007

SANS 1287-2:2007

SANS 1288:2008

SANS 1291-1:2003

SANS 1291-2:2009

SANS Number

(SABS 1263-2)

(SABS 1263-3)

(SABS 1265)

(SABS 1266)

(SABS 1269)

(SABS 1270)

(SABS 1271)

(SABS 1272)

(SABS 1273)

(SABS 1274)

(SABS 1281)

(SABS 1283)

(SABS 1284)

(SABS 1285)

(SABS 1287-1)

(SABS 1287-2)

(SABS 1288)

(SABS 1291-1)

(SABS 1291-2)


October 2009

1.01

2

1.01

1.02

1.01

1.02

1

1

1.02

3

2

4

3

2

1.02

1.02

1

3.01

1

2.01

Edition

Castors for furniture

Precast concrete manhole sections and components

Leather gloves

Ladies' fashion handbags

Toothpaste

Wrought copper alloys Part 1: Chemical compositionof copper-zinc alloys (non-leaded and leaded)

Light ladders

Light ladders Part 2: Portable aluminium ladders,steps and trestles for household use

Sealing compounds for the building industry, one-component, silicone-rubber-base

Pipe threads where pressure-tight joints are notmade on the threads Part 1: Dimensions, tolerancesand designation

Pipe threads where pressure-tight joints are notmade on the threads Part 2: Verification by meansof limit gauges

Domestic solar water heaters

Plaster-of-Paris bandages

Printed labels for textiles

Refuse bins of polymeric materials

Metal clisco windows

Welded stainless steel tubes for the conveyance ofwater and other aqueous liquids - Technical deliveryconditions

Conveyor belt idlers Part 1: Troughed belt conveyoridlers (metallic and non-metallic) for belt speeds ofup to 5,0 m/s

Conveyor belt idlers Part 2: Link suspended idlersand fixed-form suspended idlers

Cotton cellular blankets

Title

SANS 1292:2009

SANS 1294:2006

SANS 1297:2001

SANS 1298:2001

SANS 1302:2008

SANS 1303-1:2008

SANS 1304:1980

SANS 1304-2:2009

SANS 1305:2009

SANS 1306-1:2006/ISO 228-1:2000, IDT, Ed. 4

SANS 1306-2:1990/ISO 228-2:1987, IDT

SANS 1307:2009

SANS 1308:2007

SANS 1309:2007

SANS 1310:2007

SANS 1311:2007

SANS 1312:2008/EN 10312:2002, IDT, Ed. 1

SANS 1313-1:2002

SANS 1313-2:1998

SANS 1316:2007

SANS Number

(SABS 1292)

(SABS 1294)

(SABS 1297)

(SABS 1298)

(SABS 1302)

(SABS 1303-1)

(SABS 1304)

(SABS 1305)

(SABS 1306-1)

(SABS 1306-2)

(SABS 1307)

(SABS 1308)

(SABS 1309)

(SABS 1310)

(SABS 1311)

(SABS 1313-1)

(SABS 1313-2)

(SABS 1316)


October 2009

1

3

1.03

1.01

1.04

1.01

1.02

1.03

2.02

1.02

1.04

2.04

2.05

2.03

3.07

1.04

1

1

1.01

3.02

Edition

Apparatus for gamma radiography

Zinc phosphate primer for steel

PVC gum boots Part 1: Injection-moulded gumboots

PVC gum boots Part 2: Dip-moulded gum boots withpre-moulded stuck-on outer soles and heels

PVC gum boots Part 3: Injection-moulded ankleboots for men

Non-metallic waste traps Part 1: Plastics waste traps

Non-metallic waste traps Part 2: Rubber waste traps

Portable, non-refillable fire extinguishers (generalpurpose type)

Upholstery fabrics

Sodium lauryl ether sulphate

Electrical connectors for towing and towed vehicles(7-pole connectors)

Retro-reflective and fluorescent warning signs forroad vehicles Part 1: Triangles

Retro-reflective and fluorescent warning signs forroad vehicles Part 2: Abnormal load vehicle signs

Retro-reflective and fluorescent warning signs forroad vehicles Part 3: Signs other than triangles,chevron signs and abnormal load vehicle signs

Retro-reflective and fluorescent warning signs forroad vehicles Part 4: Retro-reflective chevron signs

Retro-reflective and fluorescent warning signs forroad vehicles Part 5: Retro-reflective chevron decals

Waterless hand cleaners

Dental zinc oxide-eugenol impression paste

Abrasion-resisting white cast irons

Electric cables - Cross-linked polyethylene (XLPE)insulated cables for rated voltages 3,8/6,6 kV to19/33 kV

Title

SANS 1317:1980/ISO 3999:1977, NEQ

SANS 1319:2009

SANS 1320-1:2001

SANS 1320-2:2001

SANS 1320-3:2006

SANS 1321-1:2009

SANS 1321-2:2007

SANS 1322:2004

SANS 1324:2006

SANS 1326:2008

SANS 1327:2004

SANS 1329-1:2004

SANS 1329-2:2004

SANS 1329-3:2007

SANS 1329-4:2006

SANS 1329-5:2006

SANS 1330:1981

SANS 1337:1982

SANS 1338:2008

SANS 1339:2006

SANS Number

(SABS 1317)

(SABS 1319)

(SABS 1320-1)

(SABS 1320-2)

(SABS 1320-3)

(SABS 1321-1)

(SABS 1321-2)

(SABS 1322)

(SABS 1324)

(SABS 1326)

(SABS 1327)

(SABS 1329-1)

(SABS 1329-2)

(SABS 1329-3)

(SABS 1329-4)

(SABS 1329-5)

(SABS 1330)

(SABS 1337)

(SABS 1338)

(SABS 1339)


October 2009

1.02

3

2

1.02

1.02

1.02

2

1.04

2

1.01

1.02

1.02

1.02

1.02

1.02

1.01

1.01

2.08

2

3

Edition

Detergent for high-pressure cleaning (hot and steamcleaning)

Insecticidal solid fumigants that contain aluminiumphosphide (food storage premises)

Medium duty solvent detergent

Polyvinyl acetate dispersion adhesives for wood

Phenolic, aminoplastic and one-part polyurethaneresin adhesives for the laminating and finger-jointingof timber, and for furniture and joinery

Guardrails for roads (W-section)

Canvas tentage and tarpaulin webbing

Screwdrivers for cross-recessed-head screws

Fixed electric instantaneous water heaters

Granite surface plates and tables

Size designation of clothes Part 1: Men's and boys'outerwear garments

Size designation of clothes Part 2: Women's andgirls' outerwear garments

Size designation of clothes Part 3: Infants' garments

Size designation of clothes Part 4: Gloves

Size designation of clothes Part 5: Headwear

Size designation of clothes Part 6: Men's and boys'underwear, nightwear and shirts

Size designation of clothes Part 7: Women's andgirls' underwear, nightwear, foundation garmentsand shirts

Sewing threads

Young people's shoes (stuck-on and stitch-downconstructions)

Solvent degreasers that contain chlorinatedhydrocarbons

Title

SANS 1341:2003

SANS 1343:2009

SANS 1344:2009

SANS 1348:2005

SANS 1349:2006

SANS 1350:2005

SANS 1351:2007

SANS 1354:2008

SANS 1356:2006

SANS 1357:2008

SANS 1360-1:2008

SANS 1360-2:2008

SANS 1360-3:2008

SANS 1360-4:2008

SANS 1360-5:2008

SANS 1360-6:2008

SANS 1360-7:2008

SANS 1362:2008

SANS 1363:1999

SANS 1365:2009

SANS Number

(SABS 1341)

(SABS 1343)

(SABS 1344)

(SABS 1348)

(SABS 1349)

(SABS 1350)

(SABS 1351)

(SABS 1354)

(SABS 1356)

(SABS 1357)

(SABS 1360-1)

(SABS 1360-2)

(SABS 1360-3)

(SABS 1360-4)

(SABS 1360-5)

(SABS 1360-6)

(SABS 1360-7)

(SABS 1362)

(SABS 1363)

(SABS 1365)


October 2009

2.01

2

2

1.02

1.02

1

1.01

2.01

3.01

1.06

1.04

1.05

3.01

1.01

2

1

2.02

1.02

1.01

2

1.01

Edition

Steel cord reinforced conveyor belting

Horticultural mineral oils for use on agricultural cropsPart 1: Base oils

Horticultural mineral oils for use on agricultural cropsPart 2: Monophase emulsifiable concentrates

Fluxes for the submerged arc welding of carbon andcarbon manganese steels

Ceramic hollow insulators for standard transformerbushings

Prefabricated concrete components for fences

Chain-link fencing and its wire accessories

Toothbrushes

Textile floor coverings (pile construction)

Lights for motor vehicles Part 1: Incandescent lamps

Lights for motor vehicles Part 2: Headlights

Lights for motor vehicles Part 3: Secondary lights

Materials for thermal insulation of buildings Part 1:Fibre thermal insulation mats

Materials for thermal insulation of buildings Part 2:Loose fill thermal insulation material

Materials for thermal insulation of buildings Part 4:Reflective foil laminates (rolls, sheets and sections)

Materials for thermal insulation of buildings Part 6:Cellulose loose fill thermal insulation material

Hose Part 1: Men's and women's hose forinstitutional use

Hose Part 2: Commercial and sports hose

Rigid urethane and isocyanurate foams for use inthermal insulation

Plastics containers for parenteral solutions

Kitchen cupboards: Built-in and free-standing

Title

SANS 1366:2006

SANS 1367-1:2007

SANS 1367-2:2007

SANS 1370:2007

SANS 1371:2008

SANS 1372:1983

SANS 1373:2008

SANS 1374:2008

SANS 1375:2005

SANS 1376-1:2008

SANS 1376-2:2006

SANS 1376-3:2006

SANS 1381-1:2007

SANS 1381-2:2007

SANS 1381-4:2009

SANS 1381-6:1994

SANS 1382-1:2008

SANS 1382-2:2008

SANS 1383:2008

SANS 1384:2006

SANS 1385:2008

SANS Number

(SABS 1366)

(SABS 1367-1)

(SABS 1367-2)

(SABS 1370)

(SABS 1371)

(SABS 1372)

(SABS 1373)

(SABS 1374)

(SABS 1375)

(SABS 1376-1)

(SABS 1376-2)

(SABS 1376-3)

(SABS 1381-1)

(SABS 1381-2)

(SABS 1381-4)

(SABS 1381-6)

(SABS 1382-1)

(SABS 1382-2)

(SABS 1383)

(SABS 1384)

(SABS 1385)


October 2009

2

2

2

2

2

2

2

2

2

2

2

2

1.01

1.02

1.01

2.03

1.02

2.01

1

2.03

Edition

Woven cotton and similar apparel fabrics Parts 1 -11, bound together, loose-leaf

Woven cotton and similar apparel fabrics Part 1:Basic requirements

Woven cotton and similar apparel fabrics Part 2:Polyester-and-cotton workwear fabrics

Woven cotton and similar apparel fabrics Part 3:Polyester-and-viscose workwear fabrics

Woven cotton and similar apparel fabrics Part 4:Cotton jean and drill fabrics

Woven cotton and similar apparel fabrics Part 5:Cotton flannelette fabrics

Woven cotton and similar apparel fabrics Part 6:Denim fabrics

Woven cotton and similar apparel fabrics Part 7:Jacket linings

Woven cotton and similar apparel fabrics Part 8:Cotton dress fabrics

Woven cotton and similar apparel fabrics Part 9:Polyester-and-cotton shirt fabrics

Woven cotton and similar apparel fabrics Part 10:Pocketing

Woven cotton and similar apparel fabrics Part 11:Polyester-and-cellulosic raincoat fabrics

Tables

Steel fencing for private swimming pools

Soft-top suitcases

Duvets and pillows Part 1: Plumage filled

Duvets and pillows Part 2: Synthetic-fibre filled

Wooden scaffold boards

Industrial safety helmets

Wood charcoal and charcoal briquettes forhousehold use

Title

SANS 1387 (PARTS 1-11):2003

SANS 1387-1:2003

SANS 1387-2:2003

SANS 1387-3:2003

SANS 1387-4:2003

SANS 1387-5:2003

SANS 1387-6:2003

SANS 1387-7:2003

SANS 1387-8:2003

SANS 1387-9:2003

SANS 1387-10:2003

SANS 1387-11:2003

SANS 1389:2009

SANS 1390:2005

SANS 1392:2002

SANS 1394-1:2009

SANS 1394-2:2003

SANS 1396:2008

SANS 1397:2003/EN 397:1995, IDT, Ed. 1

SANS 1399:2008

SANS Number

(SABS 1387 (PARTS 1-11))

(SABS 1387-1)

(SABS 1387-2)

(SABS 1387-3)

(SABS 1387-4)

(SABS 1387-5)

(SABS 1387-6)

(SABS 1387-7)

(SABS 1387-8)

(SABS 1387-9)

(SABS 1387-10)

(SABS 1387-11)

(SABS 1389)

(SABS 1390)

(SABS 1392)

(SABS 1394-1)

(SABS 1394-2)

(SABS 1396)

(SABS 1399)


October 2009

2

2.01

2.01

2.01

2.01

2.01

2.01

2.01

2.01

2.01

2.01

2.01

2.01

2.01

2.01

2.01

2.01

1.02

2.03

Edition

Equipment (including oculars) for eye, face and neckprotection against non-ionizing radiation arisingduring welding and similar operations - Weldinghelmets, handshields, goggles and weldingspectacles

Woven cotton and similar household fabrics andarticles Parts 1 - 15, bound together, loose-leaf

Woven cotton and similar household fabrics andarticles Part 1: Basic requirements for piece-goodsand made-up articles

Woven cotton and similar household fabrics andarticles Part 2: Winter sheeting, sheets andpillowcases

Woven cotton and similar household fabrics andarticles Part 3: Cotton sheeting, sheets, andpillowcases

Woven cotton and similar household fabrics andarticles Part 4: Polyester-and-cotton sheeting,sheets and pillowcases

Woven cotton and similar household fabrics andarticles Part 5: Terry towelling, towels, and otherterry weave articles

Woven cotton and similar household fabrics andarticles Part 6: Cotton curtain fabrics

Woven cotton and similar household fabrics andarticles Part 7: Cotton curtain lining

Woven cotton and similar household fabrics andarticles Part 8: Bedspread fabrics and bedspreads

Woven cotton and similar household fabrics andarticles Part 9: Cotton flannelette duster fabric anddusters

Woven cotton and similar household fabrics andarticles Part 10: Cotton ticking

Woven cotton and similar household fabrics andarticles Part 11: Featherproof fabrics

Woven cotton and similar household fabrics andarticles Part 12: Kitchen cloth fabric and kitchencloths

Woven cotton and similar household fabrics andarticles Part 13: Cotton huckaback towelling andtowels

Woven cotton and similar household fabrics andarticles Part 14: Cotton table-cloth fabric, table-cloths, and table napkins

Woven cotton and similar household fabrics andarticles Part 15: Cotton dishcloth fabrics anddishcloths

Acrylic sanitary ware Part 1: Baths

Eye protectors for industrial and non-industrial use

Title

SANS 1400:1993

SANS 1401 (PARTS 1-15):2007

SANS 1401-1:2007

SANS 1401-2:2007

SANS 1401-3:2007

SANS 1401-4:2007

SANS 1401-5:2007

SANS 1401-6:2007

SANS 1401-7:2007

SANS 1401-8:2007

SANS 1401-9:2007

SANS 1401-10:2007

SANS 1401-11:2007

SANS 1401-12:2007

SANS 1401-13:2007

SANS 1401-14:2007

SANS 1401-15:2007

SANS 1402-1:2008

SANS 1404:2002/BS 2092:1987, NEQ

SANS Number

(SABS 1400)

(SABS 1401 (PARTS 1-15))

(SABS 1401-1)

(SABS 1401-2)

(SABS 1401-3)

(SABS 1401-4)

(SABS 1401-5)

(SABS 1401-6)

(SABS 1401-7)

(SABS 1401-8)

(SABS 1401-9)

(SABS 1401-10)

(SABS 1401-11)

(SABS 1401-12)

(SABS 1401-13)

(SABS 1401-14)

(SABS 1401-15)

(SABS 1402-1)

(SABS 1404)


October 2009

3

2.01

2

1.04

2.01

2.02

2.01

2.02

3.01

2.01

2.01

2.02

1.03

1.07

1.05

2.02

1.01

1

2

1.01

1.03

Edition

Commercial refrigerated food display cabinets

Anodized coatings on aluminium (for generalapplications)

Mechanical components for tendon based rocksupport systems

Outlet sockets and probes for medical (gas andvacuum) services used in hospitals

Materials of insulated electric cables and flexiblecords Part 1: Conductors

Materials of insulated electric cables and flexiblecords Part 2: Polyvinyl chloride (PVC)

Materials of insulated electric cables and flexiblecords Part 3: Elastomers

Materials of insulated electric cables and flexiblecords Part 4: Cross-linked polyethylene (XLPE)

Materials of insulated electric cables and flexiblecords Part 5: Halogen-free, flame-retardantmaterials

Materials of insulated electric cables and flexiblecords Part 6: Armour

Materials of insulated electric cables and flexiblecords Part 7: Polyethylene (PE)

Textile floor coverings (needle-punchedconstruction)

Alkali-resistant plaster primer (pigmented, solvent-type)

Aerial bundled conductor systems Part 1: Cores

Aerial bundled conductor systems Part 2:Assembled insulated conductor bundles

Carpet underlays

Bed bases (spring upholstered)

Rubber- or plastics-coated fabrics - Determination oftensile strength and elongation at break

Domestic electric laundry treatment machines

Performance requirements for textile fabrics of lowflammability Part 1: Apparel fabrics

Performance requirements for textile fabrics of lowflammability Part 2: Curtain and drape fabrics

Title

SANS 1406:2006

SANS 1407:2007

SANS 1408:2002

SANS 1409:2008

SANS 1411-1:2008

SANS 1411-2:2009

SANS 1411-3:2006

SANS 1411-4:2009

SANS 1411-5:2009

SANS 1411-6:2008

SANS 1411-7:2009

SANS 1415:2009

SANS 1416:2005

SANS 1418-1:2009

SANS 1418-2:2009

SANS 1419:2009

SANS 1420:2009

SANS 1421:1998/ISO 1421:1998, IDT, Ed. 2

SANS 1422:2006

SANS 1423-1:2008

SANS 1423-2:2009

SANS Number

(SABS 1406)

(SABS 1407)

(SABS 1408)

(SABS 1409)

(SABS 1411-1)

(SABS 1411-2)

(SABS 1411-3)

(SABS 1411-4)

(SABS 1411-5)

(SABS 1411-6)

(SABS 1411-7)

(SABS 1415)

(SABS 1416)

(SABS 1418-1)

(SABS 1418-2)

(SABS 1419)

(SABS 1420)

(SABS ISO 1421)

(SABS 1422)

(SABS 1423-1)

(SABS 1423-2)


October 2009

2

2

1.01

1.01

2

1

1.02

1.08

1.01

1.01

1.01

1.01

2

1

1

1.04

1

1

2.04

Edition

Performance requirements for textile fabrics of lowflammability Part 3: Upholstery fabrics

Performance requirements for textile fabrics of lowflammability Part 4: Bedding fabrics, bedcovers andpillows

Performance requirements for textile fabrics of lowflammability Part 5: Fabrics for use in movable officepartitions

Filters for use in air-conditioning and generalventilation

Conforming bandages

Motor vehicle safety: Strength of seats and theiranchorages

Anchorages for restraining devices in motor vehicles

Weldable structural steels

Electrical terminals and connectors Part 1: Terminalblocks having screw and screwless terminals

Electrical terminals and connectors Part 2: Flatpush-on connectors

Biocides for use in emulsions of aqueous metalworking fluid and aqueous hydraulic fluid

The rear-view mirrors of motor vehicles of categoriesM and N (Incorporating EEC Directive 71/127, asamended by EEC Directives 79/795, 85/205 and88/321, relating to the rear-view mirrors of motorvehicles, with modifications)

Footwear soling material and footwear sole and heelcomponents of rubber and plastics

Helmet light assemblies for miners Part 1:Incandescent lamps

Helmet light assemblies for miners Part 2: Lead-acidbatteries

Helmet light assemblies for miners Part 3: Cables

Helmet light assemblies for miners Part 4: Helmetlights (headlights)

Helmet light assemblies for miners Part 5: Helmetlight assemblies

Automotive upholstery fabrics

Title

SANS 1423-3:2004

SANS 1423-4:2004

SANS 1423-5:2008

SANS 1424:2008

SANS 1427:2006

SANS 1429:1987/74/408/EEC:1974, MOD;81/577/EECAI & AIII:1981, MOD

SANS 1430:2007

SANS 1431:2007

SANS 1433-1:2008

SANS 1433-2:2008

SANS 1435:2004

SANS 1436:1994/71/127/EEC:1971, NEQ;79/795/EEC:1979, NEQ; 85/205/EEC:1985, NEQ;88/321/EEC:1988, NEQ

SANS 1437:2003

SANS 1438-1:1987

SANS 1438-2:1987

SANS 1438-3:2005

SANS 1438-4:1987

SANS 1438-5:1987

SANS 1439:2008

SANS Number

(SABS 1423-3)

(SABS 1423-4)

(SABS 1423-5)

(SABS 1424)

(SABS 1427)

(SABS 1429)

(SABS 1430)

(SABS 1431)

(SABS 1433-1)

(SABS 1433-2)

(SABS 1435)

(SABS 1436)

(SABS 1437)

(SABS 1438-1)

(SABS 1438-2)

(SABS 1438-3)

(SABS 1438-4)

(SABS 1438-5)

(SABS 1439)


October 2009

1

2

1.03

1

2.01

2.01

2.01

2.01

2.01

2.01

2.01

2.01

2.01

1.01

1.01

1.02

2.01

2.01

2

2.01

Edition

Motor vehicle safety: The steering mechanism ofmotor vehicles (Category M1 only): Behaviour onimpact

Speedometer equipment on motor vehicles

Roadstuds

Motor vehicle safety: Door latches and hinges

Schoolwear fabrics Parts 1 - 8, bound together,loose leaf, binder extra

Schoolwear fabrics Part 1: Basic requirements

Schoolwear fabrics Part 2: Blazer fabrics

Schoolwear fabrics Part 3: Polyester-and-woolfabrics

Schoolwear fabrics Part 4: Polyester-and-viscosefabrics

Schoolwear fabrics Part 5: Polyester-and-cottonfabrics

Schoolwear fabrics Part 6: Shirting and blousefabrics

Schoolwear fabrics Part 7: Fabrics containingtextured yarns

Schoolwear fabrics Part 8: Warp-knitted fabrics

Thermal insulation materials for industrialapplications Part 2: Metal-mesh-faced mineral fibremattresses

Thermal insulation materials for industrialapplications Part 3: Bonded preformed mineral fibrepipe sections

Glass rovings

Braking (motor and towed vehicles, designed for lowspeed or for use off public roads) Part 1: Low speedvehicles

Braking (motor and towed vehicles, designed for lowspeed or for use off public roads) Part 2: Low speedtrailers

Wax emulsion for coating citrus fruit

Ceramic wall and floor tiles

Title

SANS 1440:1987/74/297/EEC:1974, MOD

SANS 1441:2006/75/443/EEC:1975, MOD; ECER39:1983, MOD

SANS 1442:2008

SANS 1443:1987/70/387/EEC:1970, MOD

SANS 1444 SET:2008

SANS 1444-1:2008

SANS 1444-2:2008

SANS 1444-3:2008

SANS 1444-4:2008

SANS 1444-5:2008

SANS 1444-6:2008

SANS 1444-7:2008

SANS 1444-8:2008

SANS 1445-2:2008

SANS 1445-3:2008

SANS 1446:2007

SANS 1447-1:2007

SANS 1447-2:2007

SANS 1448:2006

SANS 1449:2008

SANS Number

(SABS 1440)

(SABS 1441)

(SABS 1442)

(SABS 1443)

(SABS 1444 SET)

(SABS 1444-1)

(SABS 1444-2)

(SABS 1444-3)

(SABS 1444-4)

(SABS 1444-5)

(SABS 1444-6)

(SABS 1444-7)

(SABS 1444-8)

(SABS 1445-2)

(SABS 1445-3)

(SABS 1446)

(SABS 1447-1)

(SABS 1447-2)

(SABS 1448)

(SABS 1449)


October 2009

1.02

1.01

1.02

1.01

1.02

1.02

1.03

1.02

1.03

1.03

1.01

1.04

1.04

1

1

1.03

1.01

1.01

1.01

1.02

Edition

Hearing protectors Part 1: Ear-muffs

Hearing protectors Part 2: Ear-plugs

Hearing protectors Part 3: Ear-muffs attached to anindustrial safety helmet

Overhead projectors

Copper tubes for medical gas and vacuum services

Collapsible delivery hose for fire fighting purposesPart 1: General requirements and methods of test

Collapsible delivery hose for fire fighting purposesPart 2: Percolating fire hose

Collapsible delivery hose for fire fighting purposesPart 3: Uncoated non-percolating fire hose

Collapsible delivery hose for fire fighting purposesPart 4: Coated non-percolating fire hose

Collapsible delivery hose for fire fighting purposesPart 5: Oil-resistant and chemical-resistant fire hose

Plastics buttons

Traffic lights

Laminated timber (glulam)

Road marking materials - Retroreflecting road studsPart 1: Initial performance requirements

Road marking materials - Retroreflecting road studsPart 2: Road test performance specifications

Safety of luminaires Part 22: Luminaires foremergency lighting

Steel castings for general engineering applicationsPart 1: Carbon and low alloy steel castings

Steel castings for general engineering applicationsPart 2: Wear-resistant carbon and low alloy steelcastings

Steel castings for general engineering applicationsPart 3: Corrosion-resistant and heat-resistant steelcastings

Narrow bandsaw blades

Title

SANS 1451-1:2008

SANS 1451-2:2008

SANS 1451-3:2008

SANS 1452:2005

SANS 1453:2008

SANS 1456-1:2007

SANS 1456-2:2007

SANS 1456-3:2007

SANS 1456-4:2007

SANS 1456-5:2007

SANS 1457:2008

SANS 1459:2004

SANS 1460:2006

SANS 1463-1:2007/EN 1463-1:1997, IDT, Ed. 1

SANS 1463-2:2007/EN 1463-2:2000, IDT, Ed. 1

SANS 1464-22:2007

SANS 1465-1:2008

SANS 1465-2:2008

SANS 1465-3:2008

SANS 1467:2007

SANS Number

(SABS 1451-1)

(SABS 1451-2)

(SABS 1451-3)

(SABS 1452)

(SABS 1453)

(SABS 1456-1)

(SABS 1456-2)

(SABS 1456-3)

(SABS 1456-4)

(SABS 1456-5)

(SABS 1457)

(SABS 1459)

(SABS 1460)

(SABS 1464-22)

(SABS 1465-1)

(SABS 1465-2)

(SABS 1465-3)

(SABS 1467)


October 2009

1.01

1.02

1.02

2

2

1

1.01

1.03

3.03

4

1.01

2

1.01

1.02

1.02

2

2

1.01

Edition

Roll-over protection structures for wheeledagricultural or forestry tractors (statictesting)(Incorporating EEC Directive 79/622, asamended by EEC Directive 82/953, relating to theroll-over protection structures of wheeled agriculturalor forestry tractors (static testing), withmodifications)

Sound power labelling Part 1: Compressors

Sound power labelling Part 2: Welding generators

Sound power labelling Part 3: Rotating electricalmachinery

Sound power labelling Part 4: Pneumatic equipment

Textile floor coverings - Assessment of changes inappearance

Plastics safety glazing materials for motor vehicles

Uninterruptible power systems

The production of reconditioned fire-fightingequipment Part 1: Portable and wheeled (mobile)rechargeable fire extinguishers

The production of reconditioned fire-fightingequipment Part 2: Fire hose reels, hydrants andbooster connections

Fabricated flanged steel pipework

Pneumatic braking system connections betweendrawing and drawn vehicles Part 1: Contact typecouplings

Pneumatic braking system connections betweendrawing and drawn vehicles Part 2: Palm typecouplings

Pneumatic braking system connections betweendrawing and drawn vehicles Part 3: Thearrangement of connections on vehicles, usingcontact type or palm type couplings

Single control mixer taps

Ladies' shoes, flat lasted, with stuck-on outer soles

Permitted explosives

Flexible intermediate bulk containers

Title

SANS 1468:2006/82/953/EEC:1982, MOD;79/622/EEC:1979, MOD

SANS 1470-1:2008

SANS 1470-2:2008

SANS 1470-3:2008

SANS 1470-4:2008

SANS 1471:1996/EN 1471:1996, IDT, Ed. 1

SANS 1472:2005

SANS 1474:2004

SANS 1475-1:2006

SANS 1475-2:2008

SANS 1476:2006

SANS 1477-1:2008

SANS 1477-2:2005

SANS 1477-3:2005

SANS 1480:2005

SANS 1482:2008

SANS 1484:2007

SANS 1485:2007

SANS Number

(SABS 1468)

(SABS 1470-1)

(SABS 1470-2)

(SABS 1470-3)

(SABS 1470-4)

(SABS EN 1471)

(SABS 1472)

(SABS 1474)

(SABS 1475-1)

(SABS 1475-2)

(SABS 1476)

(SABS 1477-1)

(SABS 1477-2)

(SABS 1477-3)

(SABS 1480)

(SABS 1482)

(SABS 1484)

(SABS 1485)


October 2009

1.02

1.02

2.01

1

2

2

2.01

2

2

2

1.01

1.01

1.04

2

2

2.04

1

2.03

2.03

2.03

Edition

Domestic electric floor treatment machines Part 1:Vacuum cleaners

Domestic electric floor treatment machines Part 2:Floor polishers

Flameproof restrained and bolted type plugs andsockets

Commercial ammunition

Portland cement extenders Part 1: Groundgranulated blast-furnace slag

Portland cement extenders Part 2: Fly ash

Portland cement extenders Part 3: Silica fume

Men's shoes with stuck-on outer soles Part 1: Flatlasted construction

Men's shoes with stuck-on outer soles Part 2:California type construction

Men's shoes with stuck-on outer soles Part 3:Moccasin type construction

Electroless nickel-phosphorus plated coatings

Mobile refuse bins

Wheel flaps fitted to motor vehicles

Biocides for use in industrial cooling water

Algaecides for use in industrial cooling water

Microwave cooking appliances for domestic use

Prestressed concrete lintels

Ball type couplings and towing brackets for towingcaravans and light trailers Part 1: Towing bracketsand integrated towing devices

Ball type couplings and towing brackets for towingcaravans and light trailers Part 2: Coupling balls andball supports

Ball type couplings and towing brackets for towingcaravans and light trailers Part 3: Coupling sockets

Title

SANS 1486-1:2006

SANS 1486-2:2006

SANS 1489:2001

SANS 1490:1989

SANS 1491-1:2005

SANS 1491-2:2005

SANS 1491-3:2006

SANS 1492-1:2008

SANS 1492-2:2008

SANS 1492-3:2008

SANS 1493:2007

SANS 1494:2007

SANS 1496:2008

SANS 1497:2006

SANS 1498:2007

SANS 1502:2008

SANS 1504:1990

SANS 1505-1:2007

SANS 1505-2:2007

SANS 1505-3:2007

SANS Number

(SABS 1486-1)

(SABS 1486-2)

(SABS 1489)

(SABS 1490)

(SABS 1491-1)

(SABS 1491-2)

(SABS 1491-3)

(SABS 1492-1)

(SABS 1492-2)

(SABS 1492-3)

(SABS 1493)

(SABS 1494)

(SABS 1496)

(SABS 1497)

(SABS 1498)

(SABS 1502)

(SABS 1504)

(SABS 1505-1)

(SABS 1505-2)

(SABS 1505-3)


October 2009

1.01

1.01

1.01

1.02

1.02

1.02

1.01

2.01

1.01

2.01

1

3

3

3

2.02

1.01

1.1

1.08

2.01

Edition

Electric cables with extruded solid dielectricinsulation for fixed installations (300/500 V to 1900/3 300 V) Part 1: General

Electric cables with extruded solid dielectricinsulation for fixed installations (300/500 V to 1900/3 300 V) Part 2: Wiring cables

Electric cables with extruded solid dielectricinsulation for fixed installations (300/500 V to 1900/3 300 V) Part 3: PVC Distribution cables

Electric cables with extruded solid dielectricinsulation for fixed installations (300/500 V to 1900/3 300 V) Part 4: XLPE Distribution cables

Electric cables with extruded solid dielectricinsulation for fixed installations (300/500 V to 1900/3 300 V) Part 5: Halogen-free distribution cables

Electric cables with extruded solid dielectricinsulation for fixed installations (300/500 V to 1900/3 300 V) Part 6: Service cables

Expanded polystyrene thermal insulation boards

Flush valves for WC flushing cisterns

Door closers Part 1: Single-action overhead doorclosers

Gas measuring equipment primarily for use in minesPart 1: Battery-operated portable, flammable gasmeasuring instruments and warning devices

Gas measuring equipment primarily for use in minesPart 2: Fixed, transportable, and vehicle-mountedflammable gas measuring and warning sensorheads and instruments

High performance engine lubricating oil for petrolengines (for API Service Category SJ)

High performance engine lubricating oil for dieselengines (for API Service Category CH-4)

Transport of dangerous goods - Design,construction, testing, approval and maintenance ofroad vehicles and portable tanks

Road signs Part 1: Retro-reflective sheeting material

Road signs Part 2: Performance requirements forroad signs

Flexible electric trailing cables for use in mines Part1: Low-voltage (640/1 100 V and 1 900/3 300 V)cables

Flexible electric trailing cables for use in mines Part2: High-voltage (3,8/6,6 kV to 19/33 kV) cables

Fire extinguishing powders

Title

SANS 1507-1:2007

SANS 1507-2:2007

SANS 1507-3:2007

SANS 1507-4:2009

SANS 1507-5:2009

SANS 1507-6:2007

SANS 1508:2007

SANS 1509:2008

SANS 1510-1:2008

SANS 1515-1:2006/IEC 61779-1:1998, MOD, Ed. 1;IEC 61779-2:1998, MOD, Ed. 1

SANS 1515-2:2006

SANS 1516:2005

SANS 1517:2005

SANS 1518:2008

SANS 1519-1:2006

SANS 1519-2:2004

SANS 1520-1:2008

SANS 1520-2:2008

SANS 1522:2004

SANS Number

(SABS 1507-1)

(SABS 1507-2)

(SABS 1507-3)

(SABS 1507-4)

(SABS 1507-5)

(SABS 1507-6)

(SABS 1508)

(SABS 1509)

(SABS 1510-1)

(SABS 1515-1)

(SABS 1516)

(SABS 1517)

(SABS 1518)

(SABS 1519-1)

(SABS 1519-2)

(SABS 1520-1)

(SABS 1520-2)

(SABS 1522)


October 2009

1

4.01

2

1

1.01

1.02

1.02

1.01

1.01

1.01

2.03

1.01

1.01

2.01

1

2

2

1.04

1.04

Edition

Sheepskins (for medical use)

Electricity payment systems Part 1: Prepaymentmeters

Thermoplastics sheeting for use as a geomembrane

Cash ticket-issuing machines for public transport(not for use with magnetic stripe tickets)

Furniture Part 1: Seating

Furniture Part 2: Desks, tables and computer stands

Furniture Part 3: Storage units

Furniture Part 4: Bunk beds for domestic use

Furniture Part 6: High chairs for domestic use

Furniture Part 7: Children's cots for domestic use

Water meters for cold potable water Part 1:Metrological characteristics of mechanical watermeters of nominal bore not exceeding 100 mm

Water meters for cold potable water Part 3: Physicaldimensions

Water meters for cold potable water Part 4:Mechanical meters of nominal bore exceeding 100mm but not exceeding 800 mm

Water meters for cold potable water Part 9:Requirements for electronic indicators used withmechanical water meters, electronic water metersand electronic prepayment water measuringsystems

Prefabricated panels for thermal insulation Part 1:Panels with two impervious facing sheets

Wood-cased pencils and extruded plastics pencils,with graphite lead and coloured lead

Vent valves for drainage installations

Padlocks

Resin capsules for use with tendon based supportsystems

Title

SANS 1523:1990

SANS 1524-1:2005

SANS 1526:2003

SANS 1527:1991

SANS 1528-1:2008

SANS 1528-2:2008

SANS 1528-3:2009

SANS 1528-4:2008

SANS 1528-6:2008

SANS 1528-7:2008

SANS 1529-1:2006

SANS 1529-3:2006

SANS 1529-4:2004

SANS 1529-9:2008

SANS 1530-1:1991

SANS 1531:2003

SANS 1532:2003

SANS 1533:2005

SANS 1534:2004

SANS Number

(SABS 1523)

(SABS 1524-1)

(SABS 1526)

(SABS 1527)

(SABS 1528-1)

(SABS 1528-2)

(SABS 1528-3)

(SABS 1528-4)

(SABS 1528-6)

(SABS 1528-7)

(SABS 1529-1)

(SABS 1529-3)

(SABS 1529-4)

(SABS 1529-9)

(SABS 1530-1)

(SABS 1531)

(SABS 1532)

(SABS 1533)

(SABS 1534)


October 2009

2.03

1.02

4.02

1

1.01

2.01

3.03

3.03

1.03

1.02

1.01

1.01

1

1

1.03

2.01

2.01

2.01

2.01

2.01

Edition

Glass-reinforced polyester-coated steel tanks for theunderground storage of hydrocarbons andoxygenated solvents and intended for burialhorizontally

Plain-woven glass rovings for glass-reinforcedplastics laminates

Appliances operating on liquefied petroleum gas -Safety aspects

Men's and women's leather belts

Safety helmets for pedal cyclists

Escalators and passenger conveyors

Safety rules for the construction and installation oflifts Part 1: Electric lifts

Safety rules for the construction and installation oflifts Part 2: Hydraulic lifts

Safety rules for the construction and installation oflifts Part 3: Lifts for persons with disabilities(stairlifting platforms)

Safety rules for the construction and installation oflifts Part 4: Lifts for persons with disabilities (verticallifting platforms)

Safety rules for the construction and installation oflifts Part 5: Electric and hydraulic access, goods onlylifts

Safety rules for the construction and installation oflifts Part 6: Rack-and-pinion lifts

Safety rules for the construction and installation oflifts Part 7: Electric and hydraulic service lifts (dumbwaiters)

Safety rules for the construction and installation oflifts Part 9: Lift landing doors - Fire resistance testing

Traffic signal controllers

Motor vehicle tyres and rims - Dimensions and loadsPart 1: General

Motor vehicle tyres and rims - Dimensions and loadsPart 2: Passenger car tyres

Motor vehicle tyres and rims - Dimensions and loadsPart 3: Commercial vehicle tyres

Motor vehicle tyres and rims - Dimensions and loadsPart 4: Motorcycle and scooter tyres

Motor vehicle tyres and rims - Dimensions and loadsPart 5: Off-the-road vehicle tyres

Title

SANS 1535:2007

SANS 1538:2008

SANS 1539:2008

SANS 1540:1992

SANS 1542:1993

SANS 1543:2006

SANS 1545-1:2009

SANS 1545-2:2009

SANS 1545-3:2006

SANS 1545-4:2006

SANS 1545-5:2007

SANS 1545-6:2006

SANS 1545-7:2007

SANS 1545-9:2004

SANS 1547:2005

SANS 1550-1:2005

SANS 1550-2:2006

SANS 1550-3:2006

SANS 1550-4:2005

SANS 1550-5:2006

SANS Number

(SABS 1535)

(SABS 1538)

(SABS 1539)

(SABS 1540)

(SABS 1542)

(SABS 1543)

(SABS 1545-1)

(SABS 1545-2)

(SABS 1545-3)

(SABS 1545-4)

(SABS 1545-5)

(SABS 1547)

(SABS 1550-1)

(SABS 1550-2)

(SABS 1550-3)

(SABS 1550-4)

(SABS 1550-5)


October 2009

2.01

2.01

2.01

1.02

1.02

1.01

1.01

2

1.02

1.01

2.01

2

1.01

1.01

2

1.01

1.01

1

1

1

Edition

Motor vehicle tyres and rims - Dimensions and loadsPart 6: Agricultural vehicle tyres

Motor vehicle tyres and rims - Dimensions and loadsPart 7: Industrial vehicle tyres

Motor vehicle tyres and rims - Dimensions and loadsPart 10: Rim contours

Check valves (flanged and wafer types) Part 1: PNseries

Check valves (flanged and wafer types) Part 2:Class series

PVC-U window and door frames for external usePart 1: PVC-U profiles for window and door frames

PVC-U window and door frames for external usePart 2: Windows with frames made from PVC-Uprofiles

Roadworks delineators

ISO metric screw threads Part 1: Principles andbasic data for general purpose screw threads

ISO metric screw threads Part 2: Selected limits ofsize for general purpose screw threads

Sunscreen products

Rewound and refurbished rotating electricalmachines Part 1: Low-voltage three-phase inductionmotors

The strength of large passenger vehiclesuperstructures (roll-over protection)

The strength of seats (and their anchorages) oflarge passenger buses

Portable rechargeable fire extinguishers - CO2 typeextinguishers

CO2 gas cartridges (steel)

Electric flexible cores, cords and cables with solidextruded dielectric insulation Part 1: General

Electric flexible cores, cords and cables with solidextruded dielectric insulation Part 3: PVC-insulatedcores and cables

Electric flexible cores, cords and cables with solidextruded dielectric insulation Part 4: Rubber-insulated cores and cords

Electric flexible cores, cords and cables with solidextruded dielectric insulation Part 5: Rubber-insulated cores and cables

Title

SANS 1550-6:2005

SANS 1550-7:2005

SANS 1550-10:2006

SANS 1551-1:2008

SANS 1551-2:2007

SANS 1553-1:2007

SANS 1553-2:2007

SANS 1555:2008

SANS 1556-1:2005

SANS 1556-2:2005

SANS 1557:2005

SANS 1561-1:2006

SANS 1563:2005/ECE R66:1988, MOD, Ed. 1

SANS 1564:2005/ECE R80:1989, MOD, Ed. 1

SANS 1567:2003

SANS 1572:2007

SANS 1574-1:2008

SANS 1574-3:2007

SANS 1574-4:2007

SANS 1574-5:2007

SANS Number

(SABS 1550-6)

(SABS 1550-7)

(SABS 1550-10)

(SABS 1551-1)

(SABS 1551-2)

(SABS 1553-1)

(SABS 1553-2)

(SABS 1555)

(SABS 1556-1)

(SABS 1556-2)

(SABS 1557)

(SABS 1561-1)

(SABS 1563)

(SABS 1564)

(SABS 1567)

(SABS 1572)


October 2009

1.01

1.02

1.03

1.02

1.02

1.02

1.04

1.04

1.01

1.01

2.01

1.03

1.01

1.01

1

1.02

1

2.01

2

1.01

1

Edition

Burnt clay paving units

Electric cables - Single core arc welding cable

Durable organic powders for coating of externalarchitectural aluminium

Liquid metal polish

Hexagonal steel wire mesh gabions and revetmattresses

Erasers made from plasticized PVC

Light industrial electric floor treatment machines Part1: Vacuum cleaners

Light industrial electric floor treatment machines Part2: Floor polishers

Television transmissions Part 1: Terrestrial televisiontransmissions

Television transmissions Part 3: NICAMtransmissions

Coated fabrics for shelters and rainwear

Emulsion paints

Protection equipment for the front of motor vehicles

Shatter-resistant plastics rulers

The braking performance of trackless undergroundmining vehicles - Load haul dumpers and dumptrucks

Short-link steel chain (close-tolerance) for liftingappliances

Disinfectants based on glutaraldehyde for use onmedical instruments

Manually operated chain blocks

Forged steel lifting hooks for use with steel chains ofstrength grade M(4), P(5), S(6), T(8) and V(10)

Drop forged eyebolts and eyenuts for liftingpurposes

Antiseptics based on chlorhexidine gluconate

Title

SANS 1575:2007

SANS 1576:2008

SANS 1578:2006

SANS 1579:2007

SANS 1580:2005

SANS 1581:2006

SANS 1582-1:2008

SANS 1582-2:2008

SANS 1584-1:2008

SANS 1584-3:2006

SANS 1585:2008

SANS 1586:2007

SANS 1587:2007

SANS 1588:2006

SANS 1589:1994

SANS 1592:2005

SANS 1593:1994

SANS 1594:2007

SANS 1595:2003

SANS 1596:2007

SANS 1597:1994

SANS Number

(SABS 1575)

(SABS 1576)

(SABS 1578)

(SABS 1579)

(SABS 1580)

(SABS 1581)

(SABS 1582-1)

(SABS 1582-2)

(SABS 1584-1)

(SABS 1584-3)

(SABS 1585)

(SABS 1586)

(SABS 1587)

(SABS 1588)

(SABS 1589)

(SABS 1592)

(SABS 1593)

(SABS 1594)

(SABS 1595)

(SABS 1596)

(SABS 1597)


October 2009

2

1.04

1.01

2

2

1.01

1.01

1.01

1.02

2

1.01

1

1

1.01

2.02

1

1.01

1

1

1.02

1.01

Edition

Unleaded petrol

Cranes Part 1: Cantilever/Slewing jib cranes

Cranes Part 2: Power-driven mobile cranes

Permitted electric detonators

Structured wall pipes and fittings of unplasticizedpoly(vinyl chloride) (PVC-U) for buried drainage andsewerage systems

Electrodeposited coatings of copper and copperalloys

Radio transmissions in the VHF band Part 1:Transmission standards for FM sound broadcasting

The mechanical requirements for satellite televisionreceiving antennas

Paper punches (desk top types)

Warp-knitted terry towelling fabric and articles

Disinfectants based on glutaraldehyde for generaluse

Detergent-disinfectants based on glutaraldehyde

Chains, chain wheels and slats for slat conveyors

Timber preservative - Insecticidal deltamethrin forinterior use

Small power distribution units (ready-boards) forsingle-phase 230 V service connections

Barbed tape security barriers

New replacement brake drums for motor vehicles

Conveyor chains and their attachments (Britishseries)

Bush conveyor chains

Amplitude-modulated (AM) broadcast transmissionsin the LF, MF and HF bands

Electrodeposited coatings of silver and silver alloysfor decorative and protective purposes

Title

SANS 1598:2006

SANS 1599-1:2006

SANS 1599-2:2003

SANS 1600:2007

SANS 1601:2007

SANS 1602:2007

SANS 1609-1:2005

SANS 1611:2005

SANS 1612:2007

SANS 1613:2007

SANS 1615:1995

SANS 1616:1995

SANS 1617:1994

SANS 1618:2008

SANS 1619:2009

SANS 1620:1995

SANS 1622:2009

SANS 1623:1995/BS 4116-4:1992, NEQ

SANS 1624:1995

SANS 1625:2006

SANS 1626:2007

SANS Number

(SABS 1598)

(SABS 1599-1)

(SABS 1599-2)

(SABS 1600)

(SABS 1601)

(SABS 1602)

(SABS 1609-1)

(SABS 1611)

(SABS 1612)

(SABS 1613)

(SABS 1615)

(SABS 1616)

(SABS 1617)

(SABS 1618)

(SABS 1619)

(SABS 1620)

(SABS 1622)

(SABS 1623)

(SABS 1624)

(SABS 1625)

(SABS 1626)


October 2009

1.01

1

1.01

1.01

1.01

2.01

1.02

2

1.02

1.02

1.02

1.02

1.02

1.01

1

1

1.05

1.03

2

1.01

2.01

Edition

Electrodeposited coatings of gold and gold alloys fordecorative and protective purposes

Determination of the viscosity of polymers in dilutesolution using capillary viscometers Part 2:Poly(vinyl chloride) resins

Batteries Part 1: General information - Definitions,abbreviations and symbols

Batteries Part 2: Vented-type stationary lead-acidcells and batteries

Batteries Part 3: Vented-type prismatic nickel-cadmium cells and batteries

Manually operated chain lever hoists

Reconditioned manually operated chain lever hoists

Pneumatically powered chain hoists

Reconditioned pneumatically operated chain hoists

Reconditioned manually operated chain hoists

Baker's compressed yeast

Dried yeast for use in wet sorghum beer brewing

Lenses for sunglasses and fashion spectacles -Safety requirements

Portable insulated domestic food containers

Non-automatic self-indicating and semi-self-indicating weighing instruments

Liquid fuel dispensers

Battery chargers - Industrial type

Automotive carpeting

DC-powered (battery-operated) machines for use inhazardous locations in mines

Welding of thermoplastics - Welding rods, fillers andsolvents

Bottled water of subterranean origin

Title

SANS 1627:2007

SANS 1628-2:1998/ISO 1628-2:1998, IDT, Ed. 2

SANS 1632-1:2005

SANS 1632-2:2005

SANS 1632-3:2005

SANS 1636:2007

SANS 1637:2008

SANS 1638:2008

SANS 1639:2008

SANS 1640:2008

SANS 1642:2007

SANS 1643:2007

SANS 1644:2007

SANS 1645:2009

SANS 1649:1995

SANS 1650:1995

SANS 1652:2008

SANS 1653:2008

SANS 1654:2009

SANS 1655:2004

SANS 1657:2009

SANS Number

(SABS 1627)

(SABS ISO 1628-2)

(SABS 1632-1)

(SABS 1632-2)

(SABS 1632-3)

(SABS 1636)

(SABS 1637)

(SABS 1638)

(SABS 1639)

(SABS 1640)

(SABS 1642)

(SABS 1643)

(SABS 1644)

(SABS 1645)

(SABS 1649)

(SABS 1650)

(SABS 1652)

(SABS 1653)

(SABS 1654)

(SABS 1655)

(SABS 1657)


October 2009

2

1.01

2

2

1.01

1

1.01

1.01

1.01

1.01

1.01

1.01

1

1

1.01

1.02

1.01

1.01

1.02

1.02

Edition

Ballistic resistance of body armour

Aluminium master alloys for remelting

Correction fluids

Cord extension sets

Fibre-reinforced plastics (FRP) tanks for buried(underground) storage for petroleum products

Conveyor belt pulleys Part 1: Pulley types,construction and dimensions

Conveyor belt pulleys Part 2: Lagging

Warning lights

Welding of thermoplastics - Machines andequipment Part 1: Heated-tool welding

Welding of thermoplastics: Machines and equipmentPart 2: Electrofusion welding

Welding of thermoplastics - Machines andequipment Part 3: Hot-gas welding

Welding of thermoplastics - Machines andequipment Part 4: Hot-gas extrusion welding

Welding of thermoplastics - Machines andequipment Part 6: Ultrasonic welding, staking andinsertion

Disinfectants based on organic halogen compounds(other than iodine compounds), such as fluorine,bromine or chlorine

Disinfectants based on iodophors

The manufacture, production, processing andtreatment of canned meat products

Sterilized milk

Pasteurized milk

Verification standards for the verification of mass-measuring instruments, including commercialstandard masspieces

Verification standards for the verification of volume-measuring instruments, including commercialstandards of volume

Title

SANS 1658:2007

SANS 1659:2007

SANS 1660:2005

SANS 1661:2008

SANS 1668:2007

SANS 1669-1:2005

SANS 1669-2:2008

SANS 1670:2008

SANS 1671-1:2007

SANS 1671-2:2004

SANS 1671-3:2004

SANS 1671-4:2004

SANS 1671-6:2003

SANS 1673:2001

SANS 1674:2007

SANS 1675:2001

SANS 1678:2001

SANS 1679:2001

SANS 1697:2007

SANS 1698:2007

SANS Number

(SABS 1658)

(SABS 1659)

(SABS 1660)

(SABS 1661)

(SABS 1668)

(SABS 1670)

(SABS 1671-1)

(SABS 1671-2)

(SABS 1671-3)

(SABS 1671-4)

(SABS 1673)

(SABS 1674)

(SABS 1675)

(SABS 1678)

(SABS 1679)

(SABS 1697)

(SABS 1698)


October 2009

1

1

1

1

1

1

2

2

2

2

1

1

1

2

1

1

1

1

1

Edition

Fasteners Part 1: Terminology and nomenclatureSection 1: Bolts, screws, nuts and accessories

Fasteners Part 1: Terminology and nomenclatureSection 2: Cylindrical screw threads

Fasteners Part 2: Screw threads Section 1: ISOgeneral purpose screw threads - Basic profile -Metric screw threads

Fasteners Part 2: Screw threads Section 2: ISOgeneral purpose metric screw threads - General plan

Fasteners Part 2: Screw threads Section 3: ISOgeneral purpose metric screw threads - Selectedsizes for screws, bolts and nuts

Fasteners Part 2: Screw threads Section 4: ISOgeneral-purpose metric screw threads - Basicdimensions

Fasteners Part 2: Screw threads Section 5: ISOgeneral purpose metric screw threads - Tolerances -Principles and basic data

Fasteners Part 2: Screw threads Section 6: ISOgeneral purpose metric screw threads - Tolerances -Limits of sizes for general purpose external andinternal screw threads - Medium quality

Fasteners Part 2: Screw threads Section 7: ISOgeneral purpose metric screw threads - Tolerances -Deviations for constructional screw threads

Fasteners Part 2: Screw threads Section 8: ISOminiature screw threads

Fasteners Part 2: Screw threads Section 9: ISOgeneral-purpose metric screw threads - Gauges andgauging

Fasteners Part 2: Screw threads Section 10: ISOinch screw threads - General plan and selection forscrews, bolts and nuts - Diameter range 0,06 to 6 in

Fasteners Part 2: Screw threads Section 12: ISOinch screw threads - Allowances and tolerances

Fasteners Part 2: Screw threads Section 13:Tapping screws thread

Fasteners Part 2: Screw threads Section 14: ISOmetric trapezoidal screw threads - Basic profile andmaximum material profiles

Fasteners Part 2: Screw threads Section 15: ISOmetric trapezoidal screw threads - General plan

Fasteners Part 2: Screw threads Section 16: ISOmetric trapezoidal screw threads - Tolerances

Fasteners Part 2: Screw threads Section 17: ISOmetric trapezoidal screw threads - Basic dimensions

Fasteners Part 2: Screw threads Section 18: ISOgeneral purpose screw threads - Basic profile - Inchscrew threads

Title

SANS 1700-1-1:1996/ISO 1891:1979, IDT, Ed. 1

SANS 1700-1-2:1996/ISO 5408:1983, IDT, Ed. 1

SANS 1700-2-1:2003/ISO 68-1:1998, IDT, Ed. 1

SANS 1700-2-2:2003/ISO 261:1998, IDT, Ed. 2

SANS 1700-2-3:2003/ISO 262:1998, IDT, Ed. 2

SANS 1700-2-4:1996/ISO 724:1993, IDT, Ed. 2

SANS 1700-2-5:2003/ISO 965-1:1998, IDT, Ed. 3

SANS 1700-2-6:2003/ISO 965-2:1998, IDT, Ed. 3

SANS 1700-2-7:2003/ISO 965-3:1998, IDT, Ed. 3

SANS 1700-2-8:2009/ISO 1501:2009, IDT, Ed. 1

SANS 1700-2-9:1996/ISO 1502:1996, IDT, Ed. 2

SANS 1700-2-10:1996/ISO 263:1973, IDT, Ed. 1

SANS 1700-2-12:1996/ISO 5864:1993, IDT, Ed. 2

SANS 1700-2-13:2003/ISO 1478:1999, IDT, Ed. 2

SANS 1700-2-14:1996/ISO 2901:1993, IDT, Ed. 2

SANS 1700-2-15:1996/ISO 2902:1977, IDT, Ed. 1

SANS 1700-2-16:1996/ISO 2903:1993, IDT, Ed. 2

SANS 1700-2-17:1996/ISO 2904:1977, IDT, Ed. 1

SANS 1700-2-18:2003/ISO 68-2:1998, IDT, Ed. 1

SANS Number

(SABS 1700-1-1)

(SABS 1700-1-2)

(SABS 1700-2-4)

(SABS 1700-2-5)

(SABS 1700-2-6)

(SABS 1700-2-7)

(SABS 1700-2-8)

(SABS 1700-2-9)

(SABS 1700-2-10)

(SABS 1700-2-12)

(SABS 1700-2-13)

(SABS 1700-2-14)

(SABS 1700-2-15)

(SABS 1700-2-16)

(SABS 1700-2-17)


October 2009

1

1

1

1

1

1

1

2

1

1

2

1

1

1

1

1

1

Edition

Fasteners Part 2: Screw threads Section 19: ISOgeneral purpose metric screw threads - Tolerances -Limits of sizes for hot-dip galvanized external screwthreads to mate with internal screw threads tappedwith tolerance position H or G after galvanizing

Fasteners Part 2: Screw threads Section 20: ISOgeneral purpose metric screw threads - Tolerances -Limits of sizes for internal screw threads to matewith hot-dip galvanized external screw threads withmaximum size of tolerance position h beforegalvanizing

Fasteners Part 2: Screw threads Section 21:Aerospace - MJ threads - General requirements

Fasteners Part 2: Screw threads Section 22:Aerospace - MJ threads - Limit dimensions for boltsand nuts

Fasteners Part 3: Forms, dimensions anddesignations Section 1: Bolts, screws, studs andnuts - Symbols and designations of dimensions

Fasteners Part 3: Forms, dimensions anddesignations Section 2: Hexagon products - Widthsacross flats

Fasteners Part 3: Forms, dimensions anddesignations Section 3: Clearance holes for boltsand screws

Fasteners Part 3: Forms, dimensions anddesignations Section 4: General purpose bolts andscrews - Metric series - Radii under the head

Fasteners Part 3: Forms, dimensions anddesignations Section 5: Bolts, screws and studs -Nominal lengths, and thread lengths for generalpurpose bolts

Fasteners Part 3: Forms, dimensions anddesignations Section 6: Thread run-outs forfasteners with thread in accordance with ISO 261and ISO 262

Fasteners Part 3: Forms, dimensions anddesignations Section 7: Fasteners - Ends of partswith external ISO metric thread

Fasteners Part 3: Forms, dimensions anddesignations Section 8: Thread undercuts forexternal metric ISO threads

Fasteners Part 3: Forms, dimensions anddesignations Section 9: Cross recesses for screws

Fasteners Part 3: Forms, dimensions anddesignations Section 10: Bolts, screws and studs -Split pin holes and wire holes

Fasteners Part 3: Forms, dimensions anddesignations Section 11: Countersunk head screws- Head configuration and gauging

Fasteners Part 3: Forms, dimensions anddesignations Section 12: Countersunk flat headscrews - Penetration depth of cross recesses

Fasteners Part 3: Forms, dimensions anddesignations Section 13: Designation system forfasteners

Title

SANS 1700-2-19:2003/ISO 965-4:1998, IDT, Ed. 1

SANS 1700-2-20:2003/ISO 965-5:1998, IDT, Ed. 1

SANS 1700-2-21:2004/ISO 5855-1:1999, IDT, Ed. 3

SANS 1700-2-22:2004/ISO 5855-2:1999, IDT, Ed. 3

SANS 1700-3-1:1996/ISO 225:1983, IDT, Ed. 2

SANS 1700-3-2:1996/ISO 272:1982, IDT, Ed. 2

SANS 1700-3-3:1996/ISO 273:1979, IDT, Ed. 1

SANS 1700-3-4:2003/ISO 885:2000, IDT, Ed. 2

SANS 1700-3-5:1996/ISO 888:1976, IDT, Ed. 1

SANS 1700-3-6:1996/ISO 3508:1976, IDT, Ed. 1

SANS 1700-3-7:2003/ISO 4753:1999, IDT, Ed. 2

SANS 1700-3-8:1996/ISO 4755:1983, IDT, Ed. 1

SANS 1700-3-9:1996/ISO 4757:1983, IDT, Ed. 1

SANS 1700-3-10:1996/ISO 7378:1983, IDT, Ed. 1

SANS 1700-3-11:1996/ISO 7721:1983, IDT, Ed. 1

SANS 1700-3-12:1996/ISO 7721-2:1990, IDT, Ed. 1

SANS 1700-3-13:1996/ISO 8991:1986, IDT, Ed. 1

SANS Number

(SABS 1700-3-1)

(SABS 1700-3-2)

(SABS 1700-3-3)

(SABS 1700-3-4)

(SABS 1700-3-5)

(SABS 1700-3-6)

(SABS 1700-3-7)

(SABS 1700-3-8)

(SABS 1700-3-9)

(SABS 1700-3-10)

(SABS 1700-3-11)

(SABS 1700-3-12)

(SABS 1700-3-13)


October 2009

2

2

2

1

2

1

1.01

1

1.01

1.01

1.01

2

1

1

1

2

Edition

Fasteners Part 4: Tolerances Section 1: Tolerancesfor fasteners - Bolts, screws, studs and nuts -Product grades A, B and C

Fasteners Part 4: Tolerances Section 3: Tolerancesfor fasteners - Plain washers for bolts, screws andnuts - Product grades A and C

Fasteners Part 5: General requirements andmechanical properties Section 1: Mechanicalproperties of fasteners made of carbon steel andalloy steel - Bolts, screws and studs

Fasteners Part 5: General requirements andmechanical properties Section 2: Nuts with specifiedproof load values - Coarse thread

Fasteners Part 5: General requirements andmechanical properties Section 3: Mechanicalproperties of fasteners made of carbon steel andalloy steel - Set screws and similar threadedfasteners not under tensile stresses

Fasteners Part 5: General requirements andmechanical properties Section 4: Nuts with specifiedproof load values - Fine pitch thread

Fasteners Part 5: General requirements andmechanical properties Section 5: Prevailing torquetype steel hexagon nuts - Mechanical andperformance properties

Fasteners Part 5: General requirements andmechanical properties Section 6: Heat-treated steeltapping screws

Fasteners Part 5: General requirements andmechanical properties Section 8: Mechanicalproperties of corrosion-resistant stainless-steelfasteners - Bolts, screws and studs

Fasteners Part 5: General requirements andmechanical properties Section 9: Mechanicalproperties of corrosion-resistant stainless-steelfasteners - Nuts

Fasteners Part 5: General requirements andmechanical properties Section 10: Mechanicalproperties of corrosion-resistant stainless-steelfasteners - Set screws and similar fasteners notunder tensile stress

Fasteners Part 5: General requirements andmechanical properties Section 11: Electroplatedcoatings

Fasteners Part 5: General requirements andmechanical properties Section 12: Surfacediscontinuities - Bolts, screws and studs for generalrequirements

Fasteners Part 5: General requirements andmechanical properties Section 13: Surfacediscontinuities - Bolts, screws and studs for specialrequirements

Fasteners Part 5: General requirements andmechanical properties Section 14: Bolts, screws,studs and nuts made of non-ferrous metals

Fasteners Part 5: General requirements andmechanical properties Section 15: Bolts, screws,studs and nuts

Title

SANS 1700-4-1:2003/ISO 4759-1:2000, IDT, Ed. 2

SANS 1700-4-3:2003/ISO 4759-3:2000, IDT, Ed. 3

SANS 1700-5-1:2003/ISO 898-1:1999, IDT, Ed. 3

SANS 1700-5-2:1996/ISO 898-2:1992, IDT, Ed. 2

SANS 1700-5-3:2003/ISO 898-5:1998, IDT, Ed. 2

SANS 1700-5-4:1996/ISO 898-6:1994, IDT, Ed. 2

SANS 1700-5-5:2003/ISO 2320:1997, IDT, Ed. 3

SANS 1700-5-6:1996/ISO 2702:1992, IDT, Ed. 2

SANS 1700-5-8:2003/ISO 3506-1:1997, IDT, Ed. 1

SANS 1700-5-9:2003/ISO 3506-2:1997, IDT, Ed. 1

SANS 1700-5-10:2003/ISO 3506-3:1997, IDT, Ed. 1

SANS 1700-5-11:2003/ISO 4042:1999, IDT, Ed. 2

SANS 1700-5-12:1996/ISO 6157-1:1988, IDT, Ed. 1

SANS 1700-5-13:1996/ISO 6157-3:1988, IDT, Ed. 1

SANS 1700-5-14:1996/ISO 8839:1986, IDT, Ed. 1

SANS 1700-5-15:2008/ISO 8992:2005, IDT, Ed. 2

SANS Number

(SABS 1700-4-1)

(SABS 1700-4-3)

(SABS 1700-5-1)

(SABS 1700-5-2)

(SABS 1700-5-3)

(SABS 1700-5-4)

(SABS 1700-5-5)

(SABS 1700-5-6)

(SABS 1700-5-8)

(SABS 1700-5-9)

(SABS 1700-5-10)

(SABS 1700-5-11)

(SABS 1700-5-12)

(SABS 1700-5-13)

(SABS 1700-5-14)

(SABS 1700-5-15)


October 2009

1

1

1

2

1

1

1

1

2

1

2

2

2

1

1

1

Edition

Fasteners: Part 5: General requirements andmechanhical properties Section 16: Drilling screwswith tapping screw thread - Mechanical andfunctional properties

Fasteners Part 5: General requirements andmechanical properties Section 17: Mechanical andperformance requirements of case hardened andtempered metric thread rolling screws

Fasteners Part 5: General requirements andmechanical properties Section 18: Fasteners - Non-electrolytically applied zinc flake coatings

Fasteners Part 6: Testing and acceptanceinspection Section 2: Fasteners - Acceptanceinspection

Fasteners Part 6: Testing and acceptanceinspection Section 3: Threaded fasteners - Axialload fatigue testing - Test methods and evaluation ofresults

Fasteners Part 6: Testing and acceptanceinspection Section 4: Pins and grooved pins - Sheartest

Fasteners Part 6: Testing and acceptanceinspection Section 5: Widening test on nuts

Fasteners Part 6: Testing and acceptanceinspection Section 6: Fasteners - Preloading test forthe detection of hydrogen embrittlement - Parallelbearing surface method

Fasteners Part 7: External drive hexagon bolts andscrews Section 1: Hexagon head bolts - Productgrades A and B

Fasteners Part 7: External drive hexagon bolts andscrews Section 2: Hexagon head bolts - Productgrade B - Reduced shank (shank diameterapproximately equal to pitch diameter)

Fasteners Part 7: External drive hexagon bolts andscrews Section 3: Hexagon head bolts - Productgrade C

Fasteners Part 7: External drive hexagon bolts andscrews Section 4: Hexagon head screws - Productgrades A and B

Fasteners Part 7: External drive hexagon bolts andscrews Section 5: Hexagon head screws - Productgrade C

Fasteners Part 7: External drive hexagon bolts andscrews Section 6: Hexagon flange bolts - Smallseries

Fasteners Part 7: External drive hexagon bolts andscrews Section 7: Hexagon bolts for high-strengthstructural bolting with large width across flats (threadlengths according to SABS ISO 888) - Product gradeC - Property classes 8.8 and 10.9

Fasteners Part 7: External drive hexagon bolts andscrews Section 8: Hexagon bolts for high-strengthstructural bolting with large width across flats (shortthread length) - Product grade C - Property classes8.8 and 10.9

Title

SANS 1700-5-16:2003/ISO 10666:1999, IDT, Ed. 1

SANS 1700-5-17:2003/ISO 7085:1999, IDT, Ed. 1

SANS 1700-5-18:2003/ISO 10683:2000, IDT, Ed. 1

SANS 1700-6-2:2003/ISO 3269:2000, IDT, Ed. 3

SANS 1700-6-3:1996/ISO 3800:1993, IDT, Ed. 1

SANS 1700-6-4:1996/ISO 8749:1986, IDT, Ed. 1

SANS 1700-6-5:1998/ISO 10484:1997, IDT, Ed. 1

SANS 1700-6-6:2003/ISO 15330:1999, IDT, Ed. 1

SANS 1700-7-1:2003/ISO 4014:1999, IDT, Ed. 3

SANS 1700-7-2:1996/ISO 4015:1979, IDT, Ed. 1

SANS 1700-7-3:2003/ISO 4016:1999, IDT, Ed. 3

SANS 1700-7-4:2003/ISO 4017:1999, IDT, Ed. 3

SANS 1700-7-5:2003/ISO 4018:1999, IDT, Ed. 3

SANS 1700-7-6:2003/ISO 4162:1990, IDT, Ed. 1

SANS 1700-7-7:2003/ISO 7411:1984, IDT, Ed. 1

SANS 1700-7-8:2003/ISO 7412:1984, IDT, Ed. 1

SANS Number

(SABS 1700-6-2)

(SABS 1700-6-3)

(SABS 1700-6-4)

(SABS 1700-6-5)

(SABS 1700-7-1)

(SABS 1700-7-2)

(SABS 1700-7-3)

(SABS 1700-7-4)

(SABS 1700-7-5)


October 2009

2

2

1

1

1

2

1

2

2

2

1

1

1

1

1

1

1

1

Edition

Fasteners Part 7: External drive hexagon bolts andscrews Section 9: Hexagon head screws with metricfine pitch thread - Product grades A and B

Fasteners Part 7: External drive hexagon bolts andscrews Section 10 : Hexagon head bolts with metricfine pitch thread - Product grades A and B

Fasteners Part 7: External drive hexagon bolts andscrews Section 11: Hexagon bolts with flange -Small series - Product grade A

Fasteners Part 7: External drive hexagon bolts andscrews Section 12: Hexagon bolts with flange withmetric fine pitch thread - Small series - Productgrade A

Fasteners Part 8: Square neck bolts Section 2: Cuphead square neck bolts with small head and shortneck - Product grade B

Fasteners Part 9: Hexagon socket head screwsSection 1: Hexagon socket head cap screws

Fasteners Part 9: Hexagon socket head screwsSection 2: Hexagon socket head shoulder screws

Fasteners Part 9: Hexagon socket head screwsSection 3: Hexagon socket button head screws

Fasteners Part 9: Hexagon socket head screwsSection 4: Hexagon socket countersunk headscrews

Fasteners Part 9: Hexagon socket head screwsSection 5: Hexalobular internal driving feature forbolts and screws

Fasteners Part 10: Slotted head screws Section 1:Slotted cheese head screws - Product grade A

Fasteners Part 10: Slotted head screws Section 2:Slotted pan head screws - Product grade A

Fasteners Part 10: Slotted head screws - Section 3:Slotted countersunk flat head screws (common headstyle) - Product grade A

Fasteners Part 10: Slotted head screws Section 4:Countersunk slotted raised head screws (commonhead style) - Product grade A

Fasteners Part 11: Cross recessed countersunk flathead screws (common head style) - Grade ASection 1: Pan head screws with type H or type Zcross recess - Product grade A

Fasteners Part 11: Countersunk flat headscrews(common head style) with type H or type Zcross recess - Product grade A Section 2: Steel ofproperty class 4.8

Fasteners Part 11: Cross recessed countersunk flathead screws (common head style) - Grade ASection 3: Steel of property class 8.8, stainless steeland non-ferrous metals

Fasteners Part 11: Cross recessed head screwsSection 4: Countersunk raised head screws(common head style) with type H or type Z crossrecess - Product grade A

Title

SANS 1700-7-9:2003/ISO 8676:1999, IDT, Ed. 2

SANS 1700-7-10:2003/ISO 8765:1999, IDT, Ed. 2

SANS 1700-7-11:2003/ISO 15071:1999, IDT, Ed. 1

SANS 1700-7-12:2003/ISO 15072:1999, IDT, Ed. 1

SANS 1700-8-2:1996/ISO 8678:1988, IDT, Ed. 1

SANS 1700-9-1:2008/ISO 4762:2004, IDT, Ed. 4

SANS 1700-9-2:1996/ISO 7379:1983, IDT, Ed. 1

SANS 1700-9-3:2008/ISO 7380:2004, IDT, Ed. 3

SANS 1700-9-4:2008/ISO 10642:2004, IDT, Ed. 2

SANS 1700-9-5:2008/ISO 10664:2005, IDT, Ed. 2

SANS 1700-10-1:1996/ISO 1207:1992, IDT, Ed. 3

SANS 1700-10-2:1996/ISO 1580:1994, IDT, Ed. 2

SANS 1700-10-3:1996/ISO 2009:1994, IDT, Ed. 3

SANS 1700-10-4:1996/ISO 2010:1994, IDT, Ed. 3

SANS 1700-11-1:1996/ISO 7045:1994, IDT, Ed. 2

SANS 1700-11-2:1996/ISO 7046-1:1994, IDT, Ed. 1

SANS 1700-11-3:1996/ISO 7046-2:1990, IDT, Ed. 1

SANS 1700-11-4:1996/ISO 7047:1994, IDT, Ed. 2

SANS Number

(SABS 1700-7-9)

(SABS 1700-7-10)

(SABS 1700-8-2)

(SABS 1700-9-1)

(SABS 1700-9-2)

(SABS 1700-9-3)

(SABS 1700-9-4)

(SABS 1700-10-1)

(SABS 1700-10-2)

(SABS 1700-10-3)

(SABS 1700-10-4)

(SABS 1700-11-1)

(SABS 1700-11-2)

(SABS 1700-11-3)

(SABS 1700-11-4)


October 2009

1

2

2

2

2

2

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Fasteners Part 11: Cross recessed head screwsSection 5: Cross recessed cheese head screws

Fasteners Part 12: Set screws Section 1: Slottedheadless screws with shank

Fasteners Part 12: Set screws Section 2: Hexagonsocket set screws with flat point

Fasteners Part 12: Set screws Section 3: Hexagonsocket set screws with cone point

Fasteners Part 12: Set screws Section 4: Hexagonsocket set screws with dog point

Fasteners Part 12: Set screws Section 5: Hexagonsocket set screws with cup point

Fasteners Part 12: Set screws Section 6: Slotted setscrews with flat point

Fasteners Part 12: Set screws Section 7: Slotted setscrews with cone point

Fasteners Part 12: Set screws Section 8: Slotted setscrews with long dog point

Fasteners Part 12: Set screws Section 9: Slotted setscrews with cup point

Fasteners Part 13: Tapping screws Section 1:Hexagon head tapping screws

Fasteners Part 13: Tapping screws Section 2:Slotted pan head tapping screws

Fasteners Part 13: Tapping screws Section 3:Slotted countersunk (flat) head tapping screws(common head style)

Fasteners Part 13: Tapping screws Section 4:Slotted raised countersunk (oval) head tappingscrews (common head style)

Fasteners Part 13: Tapping screws Section 5: Crossrecessed pan head tapping screws

Fasteners Part 13: Tapping screws Section 6: Crossrecessed countersunk (flat) head tapping screws(common head style)

Fasteners Part 13: Tapping screws Section 7: Crossrecessed raised countersunk (oval) head tappingscrews

Fasteners Part 13: Tapping screws Section 8:Tapping screw and washer assemblies with plainwashers

Fasteners Part 13: Tapping screws Section 9:Hexagon washer head drilling screws with tappingscrew thread

Fasteners Part 13: Tapping screws Section 10:Cross recessed pan head drilling screws withtapping screw thread

Title

SANS 1700-11-5:2003/ISO 7048:1998, IDT, Ed. 1

SANS 1700-12-1:2004/ISO 2342:2003, IDT, Ed. 2

SANS 1700-12-2:2004/ISO 4026:2003, IDT, Ed. 3

SANS 1700-12-3:2009/ISO 4027:2003, IDT, Ed. 3

SANS 1700-12-4:2004/ISO 4028:2003, IDT, Ed. 3

SANS 1700-12-5:2004/ISO 4029:2003, IDT, Ed. 3

SANS 1700-12-6:1996/ISO 4766:1983, IDT, Ed. 1

SANS 1700-12-7:1996/ISO 7434:1983, IDT, Ed. 1

SANS 1700-12-8:1996/ISO 7435:1983, IDT, Ed. 1

SANS 1700-12-9:1996/ISO 7436:1983, IDT, Ed. 1

SANS 1700-13-1:1996/ISO 1479:1983, IDT, Ed. 1

SANS 1700-13-2:1996/ISO 1481:1983, IDT, Ed. 1

SANS 1700-13-3:1996/ISO 1482:1983, IDT, Ed. 1

SANS 1700-13-4:1996/ISO 1483:1983, IDT, Ed. 1

SANS 1700-13-5:1996/ISO 7049:1983, IDT, Ed. 1

SANS 1700-13-6:1996/ISO 7050:1983, IDT, Ed. 1

SANS 1700-13-7:1996/ISO 7051:1983, IDT, Ed. 1

SANS 1700-13-8:2003/ISO 10510:1999, IDT, Ed. 1

SANS 1700-13-9:2003/ISO 15480:1999, IDT, Ed. 1

SANS 1700-13-10:2003/ISO 15481:1999, IDT, Ed. 1

SANS Number

(SABS 1700-12-1)

(SABS 1700-12-2)

(SABS 1700-12-3)

(SABS 1700-12-4)

(SABS 1700-12-5)

(SABS 1700-12-6)

(SABS 1700-12-7)

(SABS 1700-12-8)

(SABS 1700-12-9)

(SABS 1700-13-1)

(SABS 1700-13-2)

(SABS 1700-13-3)

(SABS 1700-13-4)

(SABS 1700-13-5)

(SABS 1700-13-6)

(SABS 1700-13-7)


October 2009

1

1

2

2

2

2

2

1

1

1

1

1

2

2

2

1

1

Edition

Fasteners Part 13: Tapping screws Section 11:Cross recessed countersunk head drilling screwswith tapping screw thread

Fasteners Part 13: Tapping screws Section 12:Cross recessed raised countersunk head drillingscrews with tapping screw thread

Fasteners Part 14: Hexagon nuts Section 1:Hexagon nuts, style 1 - Product grades A and B

Fasteners Part 14: Hexagon nuts Section 2:Hexagon nuts, style 2 - Product grades A and B

Fasteners Part 14: Hexagon nuts Section 3:Hexagon nuts - Product grade C

Fasteners Part 14: Hexagon nuts Section 4:Hexagon thin nuts (chamfered) - Product grades Aand B

Fasteners Part 14: Section 5: Hexagon thin nuts(unchamfered) - Product grade B

Fasteners Part 14: Hexagon nuts Section 6:Hexagon nuts with flange - Coarse thread

Fasteners Part 14: Hexagon nuts Section 8:Hexagon nuts for high-strength structural boltingwith large width across flats - Product grade B -Property classes 8 and 10

Fasteners Part 14: Hexagon nuts Section 9:Hexagon nuts for structural bolting, style 1, hot-dipgalvanized (oversize tapped) - Product grades A andB - Property classes 5, 6 and 8

Fasteners Part 14: Hexagon nuts Section 10:Hexagon nuts for structural bolting with large widthacross flats, style 1 - Product grade B - Propertyclass 10

Fasteners Part 14: Hexagon nuts Section 11:Hexagon nuts for structural bolting, Style 2, hot-dipgalvanized (oversize tapped) - Product grade A -Property class 9

Fasteners Part 14: Hexagon nuts Section 12:Hexagon nuts, style 1, with metric fine pitch thread -Product grades A and B

Fasteners Part 14: Hexagon nuts Section 13:Hexagon nuts, style 2, with metric fine pitch thread -Product grades A and B

Fasteners Part 14: Hexagon nuts Section 14:Hexagon thin nuts (chamfered) with metric fine pitchthread - Product grades A and B

Fasteners Part 14: Hexagon nuts Section 15:Hexagon nuts with flange - Fine pitch thread

Fasteners Part 15: Prevailing torque type nutsSection 1: Prevailing torque type hexagon nuts (withnon-metallic insert), style 1 - Property classes 5, 8and 10

Title

SANS 1700-13-11:2003/ISO 15482:1999, IDT, Ed. 1

SANS 1700-13-12:2003/ISO 15483:1999, IDT, Ed. 1

SANS 1700-14-1:2003/ISO 4032:1999, IDT, Ed. 3

SANS 1700-14-2:2003/ISO 4033:1999, IDT, Ed. 2

SANS 1700-14-3:2003/ISO 4034:1999, IDT, Ed. 3

SANS 1700-14-4:2003/ISO 4035:1999, IDT, Ed. 3

SANS 1700-14-5:2003/ISO 4036:1999, IDT, Ed. 2

SANS 1700-14-6:2003/ISO 4161:1999, IDT, Ed. 2

SANS 1700-14-8:2003/ISO 4775:1984, IDT, Ed. 1

SANS 1700-14-9:1996/ISO 7413:1984, IDT, Ed. 1

SANS 1700-14-10:2003/ISO 7414:1984, IDT, Ed. 1

SANS 1700-14-11:2003/ISO 7417:1984, IDT, Ed. 1

SANS 1700-14-12:2003/ISO 8673:1999, IDT, Ed. 2

SANS 1700-14-13:2003/ISO 8674:1999, IDT, Ed. 2

SANS 1700-14-14:2003/ISO 8675:1999, IDT, Ed. 2

SANS 1700-14-15:2003/ISO 10663:1999, IDT, Ed. 1

SANS 1700-15-1:1998/ISO 7040:1997, IDT, Ed. 2

SANS Number

(SABS 1700-14-1)

(SABS 1700-14-2)

(SABS 1700-14-3)

(SABS 1700-14-4)

(SABS 1700-14-5)

(SABS 1700-14-9)

(SABS 1700-14-12)

(SABS 1700-14-13)

(SABS 1700-14-14)

(SABS 1700-15-1)


October 2009

2

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

2

Edition

Fasteners Part 15: Prevailing torque type nutsSection 2: Prevailing torque type hexagon nuts (withnon-metallic insert), style 2 - Property classes 9 and12

Fasteners Part 15: Prevailing torque type nutsSection 3: Prevailing torque type all-metal hexagonnuts, style 2 - Property classes 5, 8, 10 and 12

Fasteners Part 15: Prevailing torque type nutsSection 4: Prevailing torque type hexagon nuts withflange (with non-metallic insert) - Product grades Aand B

Fasteners Part 15: Prevailing torque type nutsSection 5: Prevailing torque type all-metal hexagonnuts with flange - Product grades A and B

Fasteners Part 15: Prevailing torque type nutsSection 6: Prevailing torque type all-metal hexagonnuts, style 1 - Property classes 5, 8 and 10

Fasteners Part 15: Prevailing torque type nutsSection 7: Prevailing torque type all-metal hexagonnuts, style 2 - Property class 9

Fasteners Part 15: Prevailing torque type nutsSection 8: Prevailing torque type hexagon thin nuts(with non-metallic insert)

Fasteners Part 15: Prevailing torque type nutsSection 9: Prevailing torque type hexagon nuts (withnon-metallic insert), style 1, with metric fine pitchthread - Property classes 6, 8 and 10

Fasteners Part 15: Prevailing torque type nutsSection 10: Prevailing torque type all-metal hexagonnuts, style 2, with metric fine pitch thread - Propertyclasses 8, 10 and 12

Fasteners Part 15: Prevailing torque type nutsSection 11: Prevailing torque type hexagon nuts withflange (with non-metallic insert) with metric fine pitchthread - Product grades A and B

Fasteners Part 15: Prevailing torque type nutsSection 12: Prevailing torque type all-metal hexagonnuts with flange with metric fine pitch thread -Product grades A and B

Fasteners Part 16: Washers Section 1: Plainwashers for metric bolts, screws and nuts forgeneral purposes - General plan

Fasteners Part 16: Washers Section 2: Plainwashers - Normal series - Product grade A

Fasteners Part 16: Washers Section 3: Plainwashers, chamfered - Normal series - Product gradeA

Fasteners Part 16: Washers Section 4: Plainwashers - Normal series - Product grade C

Fasteners Part 16: Washers Section 5: Plainwashers - Small series - Product grade A

Fasteners Part 16: Washers Section 6: Plainwashers - Large series - Product grade A

Title

SANS 1700-15-2:2007/ISO 7041:2002, IDT, Ed. 3

SANS 1700-15-3:1998/ISO 7042:1997, IDT, Ed. 2

SANS 1700-15-4:1998/ISO 7043:1997, IDT, Ed. 2

SANS 1700-15-5:1998/ISO 7044:1997, IDT, Ed. 2

SANS 1700-15-6:1998/ISO 7719:1997, IDT, Ed. 2

SANS 1700-15-7:1998/ISO 7720:1997, IDT, Ed. 2

SANS 1700-15-8:1998/ISO 10511:1997, IDT, Ed. 1

SANS 1700-15-9:1998/ISO 10512:1997, IDT, Ed. 1

SANS 1700-15-10:1998/ISO 10513:1997, IDT, Ed. 1

SANS 1700-15-11:1998/ISO 12125:1997, IDT, Ed. 1

SANS 1700-15-12:1998/ISO 12126:1997, IDT, Ed. 1

SANS 1700-16-1:2003/ISO 887:2000, IDT, Ed. 2

SANS 1700-16-2:2003/ISO 7089:2000, IDT, Ed. 2

SANS 1700-16-3:2003/ISO 7090:2000, IDT, Ed. 2

SANS 1700-16-4:2003/ISO 7091:2000, IDT, Ed. 2

SANS 1700-16-5:2003/ISO 7092:2000, IDT, Ed. 2

SANS 1700-16-6:2003/ISO 7093-1:2000, IDT, Ed. 1

SANS Number

(SABS 1700-15-2)

(SABS 1700-15-3)

(SABS 1700-15-4)

(SABS 1700-15-5)

(SABS 1700-15-6)

(SABS 1700-15-7)

(SABS 1700-15-8)

(SABS 1700-15-9)

(SABS 1700-15-10)

(SABS 1700-15-11)

(SABS 1700-15-12)

(SABS 1700-16-6)


October 2009

2

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Fasteners Part 16: Washers Section 7: Plainwashers - Extra large series - Product grade C

Fasteners Part 16: Washers Section 8: Plainwashers for high-strength structural bolting,hardened and tempered

Fasteners Part 16: Washers Section 9: Plainwashers, chamfered, hardened, and tempered forhigh-strength structural bolting

Fasteners Part 16: Washers Section 10: Plainwashers for clevis pins - Product grade A

Fasteners Part 16: Washers Section 14: Plainwashers - Large series - Product grade C

Fasteners Part 16: Washers Section 15: Screw andwasher assemblies with plain washers - Washerhardness classes 200 HV and 300 HV

Fasteners Part 16: Washers Section 16: Plainwashers for tapping screw and washer assemblies -Normal and large series - Product grade A

Fasteners Part 16: Washers Section 17: Plainwashers for screw and washer assemblies - Small,normal and large series - Product grade A

Fasteners Part 17: Pins Section 1: Split pins

Fasteners Part 17: Pins Section 2: Parallel pins, ofunhardened steel and austenitic stainless steel

Fasteners Part 17: Pins Section 3: Taper pins,unhardened

Fasteners Part 17: Pins Section 4: Clevis pinswithout head

Fasteners Part 17: Pins Section 5: Clevis pins withhead

Fasteners Part 17: Pins Section 6: Parallel pins withinternal thread, of unhardened steel and austeniticstainless steel

Fasteners Part 17: Pins Section 7: Parallel pins, ofhardened steel and martensitic stainless steel(Dowel pins)

Fasteners Part 17: Pins Section 8: Parallel pins withinternal thread, of hardened steel and martensiticstainless steel

Fasteners Part 17: Pins Section 9: Taper pins withinternal thread, unhardened

Fasteners Part 17: Pins Section 10: Taper pins withexternal thread, unhardened

Fasteners Part 17: Pins Section 11: Grooved pins -Full-length parallel grooved, with pilot

Fasteners Part 17: Pins Section 12: Grooved pins -Full-length parallel grooved, with chamfer

Title

SANS 1700-16-7:2003/ISO 7094:2000, IDT, Ed. 2

SANS 1700-16-8:2004/ISO 7415:1984, IDT, Ed. 1

SANS 1700-16-9:2004/ISO 7416:1984, IDT, Ed. 1

SANS 1700-16-10:1996/ISO 8738:1986, IDT, Ed. 1

SANS 1700-16-14:2003/ISO 7093-2:2000, IDT, Ed. 1

SANS 1700-16-15:2003/ISO 10644:1998, IDT, Ed. 1

SANS 1700-16-16:2003/ISO 10669:1999, IDT, Ed. 1

SANS 1700-16-17:2003/ISO 10673:1998, IDT, Ed. 1

SANS 1700-17-1:1998/ISO 1234:1997, IDT, Ed. 2

SANS 1700-17-2:1998/ISO 2338:1997, IDT, Ed. 2

SANS 1700-17-3:1996/ISO 2339:1986, IDT, Ed. 2

SANS 1700-17-4:1996/ISO 2340:1986, IDT, Ed. 2

SANS 1700-17-5:1996/ISO 2341:1986, IDT, Ed. 2

SANS 1700-17-6:1998/ISO 8733:1997, IDT, Ed. 2

SANS 1700-17-7:1998/ISO 8734:1997, IDT, Ed. 2

SANS 1700-17-8:1998/ISO 8735:1997, IDT, Ed. 2

SANS 1700-17-9:1996/ISO 8736:1986, IDT, Ed. 1

SANS 1700-17-10:1996/ISO 8737:1986, IDT, Ed. 1

SANS 1700-17-11:1998/ISO 8739:1997, IDT, Ed. 2

SANS 1700-17-12:1998/ISO 8740:1997, IDT, Ed. 2

SANS Number

(SABS 1700-16-7)

(SABS 1700-16-10)

(SABS 1700-17-1)

(SABS 1700-17-2)

(SABS 1700-17-3)

(SABS 1700-17-4)

(SABS 1700-17-5)

(SABS 1700-17-6)

(SABS 1700-17-7)

(SABS 1700-17-8)

(SABS 1700-17-9)

(SABS 1700-17-10)

(SABS 1700-17-11)

(SABS 1700-17-12)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

2

1

1

1

1

1

1

1

Edition

Fasteners Part 17: Pins Section 13: Grooved pins -Half-length reverse-taper grooved

Fasteners Part 17: Pins Section 14: Grooved pins -One-third-length centre grooved

Fasteners Part 17: Pins Section 15: Grooved pins -Half-length centre grooved

Fasteners Part 17: Pins Section 16: Grooved pins -Full-length taper grooved

Fasteners Part 17: Pins Section 17: Grooved pins -Half-length taper grooved

Fasteners Part 17: Pins Section 18: Grooved pinswith round head

Fasteners Part 17: Pins Section 19: Grooved pinswith countersunk head

Fasteners Part 17: Pins Section 20: Spring-typestraight pins - Coiled, heavy duty

Fasteners Part 17: Pins Section 21: Spring-typestraight pins - Coiled, standard duty

Fasteners Part 17: Pins Section 22: Spring-typestraight pins - Coiled, light duty

Fasteners Part 17: Pins Section 23: Spring-typestraight pins - Slotted, heavy duty

Fasteners Part 17: Pins Section 24: Spring-typestraight pins - Slotted, light duty

Fasteners Part 18: Rivets Section 1: Rivet shankdiameters

Fasteners Part 18: Rivets Section 2: Blind rivets -Terminology and definitions

Fasteners Part 18: Rivets Section 3: Blind rivets -Mechanical testing

Fasteners Part 18: Rivets Section 4: Closed endblind rivets with break pull mandrel and protrudinghead - AIA/St

Fasteners Part 18: Rivets Section 5: Closed endblind rivets with break pull mandrel and countersunkhead - AIA/St

Fasteners Part 18: Rivets Section 6: Closed endblind rivets with break pull mandrel and protrudinghead - AI/AIA

Fasteners Part 18: Rivets Section 7: Closed endblind rivets with break pull mandrel and protrudinghead - St/St

Fasteners Part 18: Rivets Section 8: Open end blindrivets with break pull mandrel and protruding head -AIA/St

Title

SANS 1700-17-13:1998/ISO 8741:1997, IDT, Ed. 2

SANS 1700-17-14:1998/ISO 8742:1997, IDT, Ed. 2

SANS 1700-17-15:1998/ISO 8743:1997, IDT, Ed. 2

SANS 1700-17-16:1998/ISO 8744:1997, IDT, Ed. 2

SANS 1700-17-17:1998/ISO 8745:1997, IDT, Ed. 2

SANS 1700-17-18:1998/ISO 8746:1997, IDT, Ed. 2

SANS 1700-17-19:1998/ISO 8747:1997, IDT, Ed. 2

SANS 1700-17-20:1998/ISO 8748:1997, IDT, Ed. 2

SANS 1700-17-21:1998/ISO 8750:1997, IDT, Ed. 2

SANS 1700-17-22:1998/ISO 8751:1997, IDT, Ed. 2

SANS 1700-17-23:1998/ISO 8752:1997, IDT, Ed. 2

SANS 1700-17-24:1998/ISO 13337:1997, IDT, Ed. 1

SANS 1700-18-1:2003/ISO 1051:1999, IDT, Ed. 1

SANS 1700-18-2:2004/ISO 14588:2000, IDT, Ed. 1

SANS 1700-18-3:2004/ISO 14589:2000, IDT, Ed. 1

SANS 1700-18-4:2004/ISO 15973:2000, IDT, Ed. 1

SANS 1700-18-5:2004/ISO 15974:2000, IDT, Ed. 1

SANS 1700-18-6:2004/ISO 15975:2002, IDT, Ed. 1

SANS 1700-18-7:2004/ISO 15976:2002, IDT, Ed. 1

SANS 1700-18-8:2004/ISO 15977:2002, IDT, Ed. 1

SANS Number

(SABS 1700-17-13)

(SABS 1700-17-14)

(SABS 1700-17-15)

(SABS 1700-17-16)

(SABS 1700-17-17)

(SABS 1700-17-18)

(SABS 1700-17-19)

(SABS 1700-17-20)

(SABS 1700-17-21)

(SABS 1700-17-22)

(SABS 1700-17-23)

(SABS 1700-17-24)

(SABS 1700-18-1)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Fasteners Part 18: Rivets Section 9: Open end blindrivets with break pull mandrel and countersunk head- AIA/St

Fasteners Part 18: Rivets Section 10: Open endblind rivets with break pull mandrel and protrudinghead - St/St

Fasteners Part 18: Rivets Section 11: Open endblind rivets with break pull mandrel and countersunkhead - St/St

Fasteners Part 18: Rivets Section 12: Open endblind rivets with break pull mandrel and protrudinghead - AIA/AIA

Fasteners Part 18: Rivets Section 13: Open endblind rivets with break pull mandrel and countersunkhead - AIA/AIA

Fasteners Part 18: Rivets Section 14: Open endblind rivets with break pull mandrel and protrudinghead - A2/A2

Fasteners Part 18: Rivets Section 15: Open endblind rivets with break pull mandrel and countersunkhead - A2/A2

Fasteners Part 18: Rivets Section 16: Open endblind rivets with break pull mandrel and protrudinghead - Cu/St or Cu/Br or Cu/SSt

Fasteners Part 18: Rivets Section 17: Open endblind rivets with break pull mandrel and countersunkhead - Cu/St or Cu/Br or Cu/SSt

Fasteners Part 18: Rivets Section 18: Open endblind rivets with break pull mandrel and protrudinghead - NiCu/St or NiCu/SSt

Fasteners Part 18: Rivets Section 19: Closed endblind rivets with pull mandrel and protruding head -A2/SSt

Fasteners Part 19: Hexalobular socket head screwsSection 1: Hexalobular socket head cap screws

Fasteners Part 19: Hexalobular socket head screwsSection 2: Hexalobular socket cheese head screws

Fasteners Part 19: Hexalobular socket head screwsSection 3: Hexalobular socket pan head screws

Fasteners Part 19: Hexalobular socket head screwsSection 4: Hexalobular socket raised countersunkhead screws

Fasteners Part 19: Hexalobular socket head screwsSection 5: Hexalobular socket pan head tappingscrews

Fasteners Part 19: Hexalobular socket head screwsSection 6: Hexalobular socket raised countersunkhead tapping screws

Fasteners Part 19: Hexalobular socket head screwsSection 7: Hexalobular socket raised countersunk(oval) head tapping screws

Bearings Part 2: Rolling bearings Section 29:Explanatory notes on ISO 281-1:1977

Title

SANS 1700-18-9:2004/ISO 15978:2002, IDT, Ed. 1

SANS 1700-18-10:2004/ISO 15979:2002, IDT, Ed. 1

SANS 1700-18-11:2004/ISO 15980:2002, IDT, Ed. 1

SANS 1700-18-12:2004/ISO 15981:2002, IDT, Ed. 1

SANS 1700-18-13:2004/ISO 15982:2002, IDT, Ed. 1

SANS 1700-18-14:2004/ISO 15983:2002, IDT, Ed. 1

SANS 1700-18-15:2004/ISO 15984:2002, IDT, Ed. 1

SANS 1700-18-16:2004/ISO 16582:2002, IDT, Ed. 1

SANS 1700-18-17:2004/ISO 16583:2002, IDT, Ed. 1

SANS 1700-18-18:2004/ISO 16584:2002, IDT, Ed. 1

SANS 1700-18-19:2004/ISO 16585:2002, IDT, Ed. 1

SANS 1700-19-1:2003/ISO 14579:2001, IDT, Ed. 1

SANS 1700-19-2:2003/ISO 14580:2001, IDT, Ed. 1

SANS 1700-19-3:2003/ISO 14583:2001, IDT, Ed. 1

SANS 1700-19-4:2003/ISO 14584:2001, IDT, Ed. 1

SANS 1700-19-5:2003/ISO 14585:2001, IDT, Ed. 1

SANS 1700-19-6:2003/ISO 14586:2001, IDT, Ed. 1

SANS 1700-19-7:2003/ISO 14587:2001, IDT, Ed. 1

SANS 1701-2-29:1996/ISO/TR 8646:1985, IDT, Ed. 1

SANS Number

(SABS 1701-2-29)


October 2009

1.02

1

1

1

1.02

1

1.01

2.02

3

2

2

1

2

1

2

1

1

1

1.02

Edition

Shade netting

Sawn eucalyptus timber Part 1: Proof-gradedstructural timber

Sawn eucalyptus timber Part 2: Brandering andbattens

Water spray fixed systems for fire protection

Electric cables - Medium-voltage aerial bundledconductors for voltages from 3,8/6,6 kV to 19/33 kV

The design of detonator initiation systems for use inmining and civil blasting applications Part 1:Electronic initiation systems

The design and approval of detonator initiationsystems for use in mining and civil blastingapplications Part 2: Electric initiation systems - Shotexploder based

Gaming equipment Part 1: Casino equipment

Gaming equipment Part 2: Limited payout gamingequipment

Gaming equipment Part 3: Monitoring and controlsystems for gaming equipment

Gaming equipment Part 4: Wagering record-keepingsoftware

Gaming equipment Part 5: Local area and wide areajackpot and progressive jackpot equipment

Gaming equipment Part 7: Tokens

Gaming equipment Part 8: Roulette wheels

Gaming equipment Part 9: Central monitoringsystem for limited payout machines

Gaming equipment Part 10: Server-based gamingsystems

Safety of industrial trucks - Self-propelled trucks upto and including 10 000 kg capacity and industrialtractors with a drawbar pull up to and including 20000 N Part 1: General requirements

Safety of industrial trucks - Self-propelled trucks upto and including 10 000 kg capacity and tractors witha drawbar pull up to and including 20 000 N Part 2:Additional requirements for trucks with elevatingoperator position and trucks specifically designed totravel with elevated loads

WC flushing systems (low-flushing capacity) thatoperate with flushing cisterns

Title

SANS 1703:2003

SANS 1707-1:2007

SANS 1707-2:2007

SANS 1709:2008/NFPA 15:2007, IDT, Ed. 11

SANS 1713:2004

SANS 1717-1:2005

SANS 1717-2:2007

SANS 1718-1:2008

SANS 1718-2:2005

SANS 1718-3:2003

SANS 1718-4:2008

SANS 1718-5:2009

SANS 1718-7:2007

SANS 1718-8:2007

SANS 1718-9:2005

SANS 1718-10:2009

SANS 1726-1:2003/EN 1726-1:1998, IDT, Ed. 1

SANS 1726-2:2003/EN 1726-2:2000, IDT, Ed. 1

SANS 1733:2007

SANS Number

(SABS 1703)

(SABS 1713)

(SABS 1717-2)

(SABS 1718-1)

(SABS 1718-2)

(SABS 1718-3)

(SABS 1718-4)

(SABS 1718-7)

(SABS 1718-9)

(SABS 1733)


October 2009

1

1.01

1.03

1.01

1.01

1.01

1.01

1

1

1.01

1.03

1.01

1.01

1.03

1

1

1

1

1.02

1.03

Edition

Cheese and processed cheese products -Determination of fat content - Gravimetric method(Reference method)

Safety helmets for cricket players

Body-worn escape type breathing apparatus

Low pressure welded steel cylinders for fireextinguishers

Cementitious grouting capsules for use with tendon-based support systems

Timber preservative - Tributyltin naphthenate-permethrin

Glass-fibre-reinforced thermosetting plastics (GRP)pipes Part 1: Pipes for water supply, sewerage anddrainage

Glass-fibre-reinforced thermosetting plastics (GRP)pipes Part 2: Pipes, fittings and joint assemblies forthe conveyance of hazardous chemical substancesin industrial applications

Glass-fibre-reinforced thermosetting plastics (GRP)pipes Part 3: Pipes, fittings and ancilliaries forunderground (buried) fire protection services

Glass-reinforced polyester (GRP) poles

Petroleum jelly (petrolatum)

Continuous pressed laminates (CPLs)

Decorative melamine-faced boards

Liquefied petroleum gases

Sterile single-use intravenous (IV) infusion sets(administration sets)

Intravenous infusion and transfusion equipment(sterile-packed for single use) Part 1: Infusion sets,gravity feed

Intravenous infusion and transfusion equipment(sterile-packed for single use) Part 2: Burette sets,gravity feed

Intravenous infusion and transfusion equipment(sterile-packed for single use) Part 4: Centralvenous pressure (CVP) monitoring sets

Photoelectric control units for lighting (PECUs)

Sawn softwood timber Part 1: General requirements

Title

SANS 1735:2005/ISO 1735:2004, IDT, Ed. 3

SANS 1736:2007

SANS 1737:2008

SANS 1739:2008

SANS 1745:2003

SANS 1746:2008

SANS 1748-1:2004

SANS 1748-2:2005

SANS 1748-3:2007

SANS 1749:2006

SANS 1755:2008

SANS 1762:2007

SANS 1763:2008

SANS 1774:2007

SANS 1775:1999

SANS 1775-1:2009

SANS 1775-2:2009

SANS 1775-4:2009

SANS 1777:2004

SANS 1783-1:2007

SANS Number

(SABS 1736)

(SABS 1737)

(SABS 1739)

(SABS 1745)

(SABS 1746)

(SABS 1748-1)

(SABS 1749)

(SABS 1755)

(SABS 1762)

(SABS 1763)

(SABS 1774)

(SABS 1775)

(SABS 1777)

(SABS 1783-1)


October 2009

1.06

1.01

1.03

1.01

1.01

2

2.01

1.01

1.01

1.01

1.01

1.01

2

2

1.01

1.01

2

1.04

1.01

1.01

Edition

Sawn softwood timber Part 2: Stress-gradedstructural timber and timber for frame wallconstruction

Sawn softwood timber Part 3: Industrial timber

Sawn softwood timber Part 4: Brandering andbattens

Low power radio broadcast transmissions Part 1:AM transmissions

Low power radio broadcast transmissions Part 2: FMtransmissions

Evidential breath analysers

Road traffic law enforcement systems Part 0:General requirements

Road traffic law enforcement systems Part 1: Laserspeed measuring equipment

Road traffic law enforcement systems Part 2: Radarspeed measuring equipment

Road traffic law enforcement systems Part 3:Distance-over-time speed measuring equipment(fixed distance/variable time)

Road traffic law enforcement systems Part 4:Distance-over-time speed measuring equipment(variable distance/variable time)

Road traffic law enforcement systems Part 5: Datacapturing and recording devices for road traffic lawenforcement

Application of durable organic powder coatings forarchitectural aluminium

Bottled tomato sauce

Watt-hour meters - AC electronic meters for activeenergy

Lugs and ferrules for insulated electric cables Part 1:Copper conductors

Induction motors Part 1: IEC requirements

Induction motors Part 2: Low-voltage three-phasestandard motors

Induction motors Part 3: Low-voltage three-phaseintermittently-rated wound-rotor motors

Induction motors Part 4: Single-phase inductionmotors

Title

SANS 1783-2:2007

SANS 1783-3:2004

SANS 1783-4:2007

SANS 1790-1:2007

SANS 1790-2:2007

SANS 1793:2006/OIML R 126:1998, IDT, Ed. 1

SANS 1795-0:2007

SANS 1795-1:2007

SANS 1795-2:2007

SANS 1795-3:2007

SANS 1795-4:2007

SANS 1795-5:2007

SANS 1796:2009

SANS 1798:2006

SANS 1799:2004

SANS 1803-1:2009

SANS 1804-1:2007

SANS 1804-2:2007

SANS 1804-3:2007

SANS 1804-4:2006

SANS Number

(SABS 1783-2)

(SABS 1783-3)

(SABS 1783-4)

(SABS 1790-1)

(SABS 1790-2)

(SABS 1793)

(SABS 1795-0)

(SABS 1795-1)

(SABS 1795-2)

(SABS 1795-3)

(SABS 1795-4)

(SABS 1795-5)

(SABS 1796)

(SABS 1798)

(SABS 1799)

(SABS 1803-1)

(SABS 1804-1)

(SABS 1804-2)

(SABS 1804-3)

(SABS 1804-4)


October 2009

1.03

1.02

1.02

1.02

1.02

1.02

1.01

1.02

1.01

1.01

1.01

1.02

1.02

1.01

1.02

1.02

1.02

1.02

1.02

1.02

Edition

Structural bearings - Bridge bearings - Materials,manufacture and installation

Water supply and distribution system componentsPart 2: Metallic compression type pipe couplings

Water supply and distribution system componentsPart 5: Flexible connectors

Water supply and distribution system componentsPart 9: Metering taps and valves (metallic bodies)

Water supply and distribution system componentsPart 10: Copper alloy check valves (spring-loaded)

Water supply and distribution system componentsPart 13: Diaphragm valves

Water supply and distribution system componentsPart 15: Mechanical backflow-prevention devices

Water supply and distribution system componentsPart 16: Drinking fountain taps

Water supply and distribution system componentsPart 18: PVC-U gate valves

Water supply and distribution system componentsPart 24: Gas-operated water heaters

Water supply and distribution system componentsPart 30: Laboratory water taps

Water supply and distribution system componentsPart 31: Automatic control valves

Water supply and distribution system componentsPart 32: Float valves (equilibrium type)

Water supply and distribution system componentsPart 35: Electronically operated taps and valves

Water supply and distribution system componentsPart 37: Single-control mixer taps (plastics)

Water supply and distribution system componentsPart 44: Pipe saddles

Water supply and distribution system componentsPart 45: Pipe repair clamps

Water supply and distribution system componentsPart 53: Drain cocks for hot-water storagecontainers

Water supply and distribution system componentsPart 58: In-line strainers

Water supply and distribution system componentsPart 66: Demand type water taps

Title

SANS 1806:2009

SANS 1808-2:2005

SANS 1808-5:2008

SANS 1808-9:2008

SANS 1808-10:2005

SANS 1808-13:2009

SANS 1808-15:2007

SANS 1808-16:2008

SANS 1808-18:2004

SANS 1808-24:2004

SANS 1808-30:2004

SANS 1808-31:2003

SANS 1808-32:2005

SANS 1808-35:2004

SANS 1808-37:2005

SANS 1808-44:2005

SANS 1808-45:2005

SANS 1808-53:2005

SANS 1808-58:2005

SANS 1808-66:2005

SANS Number

(SABS 1806)

(SABS 1808-2)

(SABS 1808-5)

(SABS 1808-9)

(SABS 1808-10)

(SABS 1808-13)

(SABS 1808-15)

(SABS 1808-16)

(SABS 1808-18)

(SABS 1808-24)

(SABS 1808-30)

(SABS 1808-31)

(SABS 1808-32)

(SABS 1808-35)

(SABS 1808-37)

(SABS 1808-44)

(SABS 1808-45)

(SABS 1808-53)

(SABS 1808-58)

(SABS 1808-66)


October 2009

1

1.01

1.02

1.01

1

1.01

1.02

1.01

1.01

1.01

1

2

1.03

1.03

2

1.01

1

1

1

1

Edition

Water supply and distribution systems Part 85:Oriented polyvinyl chloride (PVC-O) pressure pipesfor underground use

Fail-safe underground mine locomotive controlsystems

D.C. supplied luminaires for fluorescent lamps

Servicing, repair and reconditioning of safes,strongroom doors, vault doors and fire-resistantequipment

Electricity supply - Quality of supply: Power qualityinstruments

Work on glass for glazing

Snatch blocks

Reconditioned snatch blocks

Slide fasteners

Touch and close fasteners

Beam trolleys (crawls)

Gas container test stations - General requirementsfor periodic inspection and testing of portable andtransportable refillable gas containers

The safety of water treatment chemicals for use inthe food industry

Cleaning chemicals for use in the food industry

Lubricants for use in the food industry

Flexible piping for underground use at servicestations and consumer installations

Textiles - Binary fibre mixtures - Quantitativechemical analysis

Textiles - Quantitative chemical analysis Part 1:General principles of testing

Textiles - Quantitative chemical analysis Part 2:Ternary fibre mixtures

Textiles - Quantitative chemical analysis Part 3:Mixtures of acetate and certain other fibres (methodusing acetone)

Title

SANS 1808-85:2004

SANS 1809:2003

SANS 1814:2007

SANS 1815:2006

SANS 1816:2005

SANS 1817:2008

SANS 1819:2006

SANS 1820:2006

SANS 1822:2008

SANS 1823:2007

SANS 1824:2003

SANS 1825:2005

SANS 1827:2009

SANS 1828:2005

SANS 1829:2005

SANS 1830:2006

SANS 1833:1977/ISO 1833:1977, IDT, Ed. 2

SANS 1833-1:2007/ISO 1833-1:2006, IDT, Ed. 1

SANS 1833-2:2007/ISO 1833-2:2006, IDT, Ed. 1

SANS 1833-3:2007/ISO 1833-3:2006, IDT, Ed. 1

SANS Number

(SABS 1809)

(SABS 1814)

(SABS 1815)

(SABS 1817)

(SABS 1819)

(SABS 1820)

(SABS 1822)

(SABS 1823)

(SABS 1825)

(SABS 1827)

(SABS 1828)

(SABS 1829)

(SABS 1830)

(SABS ISO 1833)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Textiles - Quantitative chemical analysis Part 4:Mixtures of certain protein and certain other fibres(method using hypochlorite)

Textiles - Quantitative chemical analysis Part 5:Mixtures of viscose, cupro or modal and cottonfibres (method using sodium zincate)

Textiles - Quantitative chemical analysis Part 6:Mixtures of viscose or certain types of cupro ormodal or lyocell and cotton fibres (method usingformic acid and zinc chloride)

Textiles - Quantitative chemical analysis Part 7:Mixtures of polyamide and certain other fibres(method using formic acid)

Textiles - Quantitative chemical analysis Part 8:Mixtures of acetate and triacetate fibres (methodusing acetone)

Textiles - Quantitative chemical analysis Part 9:Mixtures of acetate and triacetate fibres (methodusing benzyl alcohol)

Textiles - Quantitative chemical analysis Part 10:Mixtures of triacetate or polylactide and certain otherfibres (method using dichloromethane)

Textiles - Quantitative chemical analysis Part 11:Mixtures of cellulose and polyester fibres (methodusing sulfuric acid)

Textiles - Quantitative chemical analysis Part 12:Mixtures of acrylic, certain modacrylics, certainchlorofibres, certain elastanes and certain otherfibres (method using dimethylformamide)

Textiles - Quantitative chemical analysis Part 13:Mixtures of certain chlorofibres and certain otherfibres (method using carbon disulfide/acetone)

Textiles - Quantitative chemical analysis Part 14:Mixtures of acetate and certain chlorofibres (methodusing acetic acid)

Textiles - Quantitative chemical analysis Part 15:Mixtures of jute and certain animal fibres (method bydetermining nitrogen content)

Textiles - Quantitative chemical analysis Part 16:Mixtures of polypropylene fibres and certain otherfibres (method using xylene)

Textiles - Quantitative chemical analysis Part 17:Mixtures of chlorofibres (homopolymers of vinylchloride) and certain other fibres (method usingsulfuric acid)

Textiles - Quantitative chemical analysis Part 18:Mixtures of silk and wool or hair (method usingsulfuric acid)

Textiles - Quantitative chemical analysis Part 19:Mixtures of cellulose fibres and asbestos (method byheating)

Textiles - Quantitative chemical analysis Part 21:Mixtures of chlorofibres, certain modacrylics, certainelastanes, acetates, triacetates and certain otherfibres (method using cyclohexanone)

Title

SANS 1833-4:2007/ISO 1833-4:2006, IDT, Ed. 1

SANS 1833-5:2007/ISO 1833-5:2006, IDT, Ed. 1

SANS 1833-6:2007/ISO 1833-6:2007, IDT, Ed. 1

SANS 1833-7:2007/ISO 1833-7:2006, IDT, Ed. 1

SANS 1833-8:2007/ISO 1833-8:2006, IDT, Ed. 1

SANS 1833-9:2007/ISO 1833-9:2006, IDT, Ed. 1

SANS 1833-10:2007/ISO 1833-10:2006, IDT, Ed. 1

SANS 1833-11:2007/ISO 1833-11:2006, IDT, Ed. 1

SANS 1833-12:2007/ISO 1833-12:2006, IDT, Ed. 1

SANS 1833-13:2007/ISO 1833-13:2006, IDT, Ed. 1

SANS 1833-14:2007/ISO 1833-14:2006, IDT, Ed. 1

SANS 1833-15:2007/ISO 1833-15:2006, IDT, Ed. 1

SANS 1833-16:2007/ISO 1833-16:2006, IDT, Ed. 1

SANS 1833-17:2007/ISO 1833-17:2006, IDT, Ed. 1

SANS 1833-18:2007/ISO 1833-18:2006, IDT, Ed. 1

SANS 1833-19:2007/ISO 1833-19:2006, IDT, Ed. 1

SANS 1833-21:2007/ISO 1833-21:2006, IDT, Ed. 1

SANS Number


October 2009

1.01

1

1.02

2

2

2

2

1.02

1

1.04

1.01

1

1.01

1.01

1.01

1.01

1.01

1.01

1.01

1.01

Edition

Unsintered polytetrafluoroethylene (PTFE) tapes forengineering applications

Ductile iron pipes, fittings, accessories and theirjoints, for use in high and low pressure systems forpotable and foul water

Electronic self-indicating road vehicle massmeasuring equipment for use by road trafficauthorities Part 1: Non-automatic mass measuringequipment for static mass measurement

Manufacture of measuring container bottles

Control of the quantity of contents in prepackedpackages within the prescriptions of legal metrologylegislation

High performance engine lubricating oil for petrolengines (for API Service Category SL)

High performance engine lubricating oil for dieselengines (for API Service Category CI-4)

The testing of polypropylene woven fabrics for use inflexible intermediate bulk containers (FIBCs) for non-dangerous goods

Prefinished sheet metal products for interior andexterior building applications

Geyser drip trays

Butterfly valves for general purposes

The design and manufacture of commercial kitchenextraction systems

Lubricating grease

Disinfectants and detergent-disinfectants for use inthe food industry

The design and manufacture of trestles

Copper alloy gate valves - Light duty

Oil spill dispersants

Wool packs for unprocessed wool

Packaged water other than natural mineral water

Point-of-use drinking water treatment units

Title

SANS 1834:2005

SANS 1835:2002

SANS 1838-1:2007

SANS 1840:2009

SANS 1841:2008

SANS 1842:2005

SANS 1843:2005

SANS 1844:2009

SANS 1845:2003

SANS 1848:2006

SANS 1849:2008

SANS 1850:2003

SANS 1851:2008

SANS 1853:2009

SANS 1854:2005

SANS 1857:2005

SANS 1858:2007

SANS 1860:2008

SANS 1862:2003

SANS 1865:2006

SANS Number

(SABS 1834)

(SABS 1835)

(SABS 1838-1)

(SABS 1840)

(SABS 1841)

(SABS 1842)

(SABS 1843)

(SABS 1844)

(SABS 1848)

(SABS 1849)

(SABS 1851)

(SABS 1853)

(SABS 1854)

(SABS 1857)

(SABS 1858)

(SABS 1860)

(SABS 1862)

(SABS 1865)


October 2009

1

1.01

1

1

1

1

1

2

1.01

1

1

1.01

1

1

1

1

1

1

2

1

Edition

Surgical face masks

Surgical face masks

Sprayed plastics foams for use in mines

Gel detergent cleaner (non-abrasive)

Chrome-tanned bend outer sole leather

Stationery - Marking pens for text highlighting

Vegetable-tanned bend outer sole leather

Switchgear - Metal-enclosed ring main units forrated a.c. voltages above 1 kV and up to andincluding 36 kV

Edible oils

A standard land-cover classification scheme forremote-sensing applications in South Africa

South African spatial metadata standard Part 1:Core metadata profile

Precast concrete suspended slabs

Polymer concrete surface boxes, manhole andinspection covers, gully gratings and frames

Geographic information - Addresses Part 1: Dataformat of addresses

Geographic information - Addresses Part 3:Guidelines for address allocation and updates

Holding pens for temporary housing of animals Part1: Holding pens for wild herbivores at auctions andin quarantine facilities

Holding pens for temporary housing of animals Part2: Vehicles for the transportation of wild herbivoresby road to holding pens and other facilities

Holding pens for temporary housing of animals Part3: Vehicles for transportation of wild carnivores byroad to holding pens and other facilities

AC metal-enclosed switchgear and controlgear forrated voltages above 1 kV and up to and including36 kV

Tissue paper Part 1: General requirements

Title

SANS 1866:2004

SANS 1866:2008

SANS 1867:2003

SANS 1868:2002

SANS 1869:2001

SANS 1872:2002

SANS 1873:2001

SANS 1874:2009/NRS 006:2009, IDT, Ed. 2

SANS 1875:2007

SANS 1877:2004

SANS 1878-1:2005

SANS 1879:2004

SANS 1882:2003

SANS 1883-1:2009

SANS 1883-3:2009

SANS 1884-1:2004

SANS 1884-2:2007

SANS 1884-3:2008

SANS 1885:2008/NRS 003:2008, IDT, Ed. 1

SANS 1887-1:2008

SANS Number

(SABS 1868)

(SABS 1869)

(SABS 1872)

(SABS 1873)

(SABS 1874)

(SABS 1875)

(SABS 1879)

(SABS 1885)


October 2009

1

1

1

1

1

1

1

1

1.01

1.01

1.01

1.01

2

3

1.02

1.02

1

1

1

1

Edition

Tissue paper Part 2: Toilet paper

Tissue paper Part 3: Facial tissues

Tissue paper Part 4: Paper towels

Tissue paper Part 5: Disposable wiping paper (inrolls)

Tissue paper Part 6: Paper dressing (medical)towels

Tissue paper Part 7: Paper serviettes

Tissue paper Part 8: Paper-towel rolls for centre-feed dispensing devices

Tissue paper Part 9: Wrappers for citrus anddeciduous fruit

Incandescent lamps for traffic signal lights

Performance requirements for clothing Part 1: Shirts

Monoplanar prefabricated timber roof trusses (nail-plated)

Safety requirements on suspended accessequipment - Design calculations, stability criteria,construction - Tests

Hydraulic brake and clutch fluid (DOT 3 and DOT 4)

Non-pressure paraffin stoves and heaters

Portable refillable fire extinguishers

Kerosene for domestic heating and illuminating

Targeted construction procurement Part 1:Participation of targeted enterprises

Targeted construction procurement Part 2:Participation of targeted partners in joint ventures

Targeted construction procurement Part 3:Participation of targeted enterprises and targetedpartners in joint ventures

Targeted construction procurement Part 4:Participation of targeted enterprises and targetedlabour (local resources)

Title

SANS 1887-2:2008

SANS 1887-3:2008

SANS 1887-4:2008

SANS 1887-5:2008

SANS 1887-6:2008

SANS 1887-7:2008

SANS 1887-8:2008

SANS 1887-9:2008

SANS 1888:2007

SANS 1891-1:2008

SANS 1900:2004

SANS 1903:2007

SANS 1905:2007

SANS 1906:2009

SANS 1910:2009

SANS 1913:2008

SANS 1914-1:2002

SANS 1914-2:2002

SANS 1914-3:2002

SANS 1914-4:2002

SANS Number

(SABS 1888)

(SABS 1891-1)

(SABS 1900)

(SABS 1903)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1.02

1.01

1

1.01

1.01

1

1.01

1

1

Edition

Targeted construction procurement Part 5:Participation of targeted labour

Targeted construction procurement Part 6:Participation of targeted enterprises in concessioncontracts

Woven backfill bags and paddock curtains

Needleless connectors (sterile-packed for singlepatient use)

Mixtures of copper azole compounds for timberpreservation

Construction and management requirements forworks contracts Part 1: General engineering andconstruction works

Construction and management requirements forworks contracts Part 2: Accommodation of traffic onpublic roads occupied by the contractor

Construction and management requirements forworks contracts Part 3: Structural steelwork

Construction and management requirements forworks contracts Part 4: Third-party managementsupport in works contracts

Construction and management requirements forworks contracts Part 5: Earthworks activities whichare to be performed by hand

Construction and management requirements forworks contracts Part 6: HIV/AIDS awareness

Acidic cleaners for the cleaning of acid-resistantsanitary ware

Scouring compounds

Toilet soaps intended for use in dispensers

Uniform provisions concerning the approval for theproduction of retreaded pneumatic tyres forcommercial vehicles and their trailers

Uniform provisions concerning the approval for theproduction of retreaded pneumatic tyres for motorvehicles and their trailers

Solid mineral fuels - Determination of gross calorificvalue by the bomb calorimetric method, andcalculation of net calorific value

Ambient air quality - Limits for common pollutants

Particle board - Highly moisture-resistant exteriortype

Live working - Portable equipment for earthing orearthing and short-circuiting - National modificationsto international requirements

Title

SANS 1914-5:2002

SANS 1914-6:2002

SANS 1915:2003

SANS 1918:2007

SANS 1920:2004

SANS 1921-1:2004

SANS 1921-2:2004

SANS 1921-3:2004

SANS 1921-4:2004

SANS 1921-5:2004

SANS 1921-6:2004

SANS 1922:2009

SANS 1923:2008

SANS 1924:2007

SANS 1925:2008

SANS 1926:2008

SANS 1928:1995/ISO 1928:1995, IDT, Ed. 2

SANS 1929:2005

SANS 1931:2003

SANS 1934:2004

SANS Number

(SABS ISO 1928)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1.01

Edition

Automotive biodiesel fuel

Cosmetic products - Quantity and marking

Presentation/representation of entries in dictionaries- Requirements, recommendations and information

Solid mineral fuels - Determination of extractablemetals in dilute hydrochloric acid

Hard coal - Size analysis by sieving

Low-voltage switchgear and controlgearASSEMBLIES Part 1: Type-tested ASSEMBLIESwith stated deviations and a rated short-circuitwithstand strength above 10 kA

Low-voltage switchgear and controlgearASSEMBLIES Part 3: Safety of ASSEMBLIES with arated prospective short-circuit current of up to andincluding 10 kA

Low-voltage switchgear and controlgearASSEMBLIES Part 7: Requirements for testingunder conditions of arcing due to internal fault

Low-voltage switchgear and controlgearASSEMBLIES Part 8: Safety of minimally testedASSEMBLIES (MTA) with a rated short-circuitcurrent above 10 kA and a rated busbar current ofup to and including 1 600 A a.c. and d.c.

Conveyor chains, attachments and sprockets

Construction works Part BE1: Earthworks (general)

Construction works Part BS1: Site clearance

Construction works Part CC1: Concrete works(structural)

Construction works Part CC2: Concrete works(minor works)

Construction works Part CG1: Installation of glazingin window and door frames

Construction works Part CM1: Masonry walling

Construction works Part CS1: Structural steelwork

Construction works Part CT1: Structural timberwork(flooring)

Construction works Part CT2: Structural timberwork(roofing)

Title

SANS 1935:2004

SANS 1937:2006

SANS 1951:2008/ISO 1951:2007, IDT, Ed. 3

SANS 1952:2009/ISO 1952:2008, IDT, Ed. 2

SANS 1953:1994/ISO 1953:1994, IDT, Ed. 2

SANS 1973-1:2007

SANS 1973-3:2008

SANS 1973-7:2008

SANS 1973-8:2008

SANS 1977:2006/ISO 1977:2000, IDT, Ed. 1

SANS 2001-BE1:2008

SANS 2001-BS1:2008

SANS 2001-CC1:2007

SANS 2001-CC2:2007

SANS 2001-CG1:2007

SANS 2001-CM1:2007

SANS 2001-CS1:2005

SANS 2001-CT1:2007

SANS 2001-CT2:2009

SANS Number

(SABS ISO 1953)


October 2009

1

1

1

1

1

2

2

1

1

1

1

1

1

1

1

2

1

1

1.02

Edition

Construction works Part DP1: Earthworks for buriedpipelines and prefabricated culverts

Construction works Part EM1: Cement plaster

Textiles - Yarn from packages - Determination oflinear density (mass per unit length) by the skeinmethod

Textiles - Determination of twist in yarns - Directcounting method

Textiles - Yarns from packages - Determination ofsingle-end breaking force and elongation at break

Thermal spraying - Metallic and other inorganiccoatings - Zinc, aluminium and their alloys

Metallic and other inorganic coatings - Definitionsand conventions concerning the measurement ofthickness

Textiles - Man-made fibres - Generic names

Metallic coatings - Electroplated coatings of zinc oniron or steel

Metallic coatings - Electroplated coatings ofcadmium on iron or steel

Electroplated coatings of tin - Specification and testmethods

Anodizing of aluminium and its alloys -Determination of mass per unit area (surfacedensity) of anodic oxide coatings - Gravimetricmethod

Information and documentation - InternationalStandard Book Number (ISBN)

Anodizing of aluminium and its alloys - Acceleratedtest of light fastness of coloured anodic oxidecoatings using artificial light

Anodizing of aluminium and its alloys - Estimation ofloss of absorptive power of anodic oxide coatingsafter sealing - Dye spot test with prior acidtreatment

Metallic coatings - Measurement of coatingthickness - Coulometric method by anodicdissolution

Non-magnetic coatings on magnetic substrates -Measurement of coating thickness - Magneticmethod

Electroplated coatings of tin-nickel alloy -Specification and test methods

Sound and television broadcast receivers andassociated equipment - Immunity characteristics -Limits and methods of measurement

Title

SANS 2001-DP1:2008

SANS 2001-EM1:2007

SANS 2060:1994/ISO 2060:1994, IDT, Ed. 2

SANS 2061:1995/ISO 2061:1995, IDT, Ed. 2

SANS 2062:1995/ISO 2062:1993, IDT, Ed. 2

SANS 2063:2008/ISO 2063:2005, IDT, Ed. 3

SANS 2064:2008/ISO 2064:1996, IDT, Ed. 3

SANS 2076:1999/ISO 2076:1999, IDT, Ed. 4

SANS 2081:1986/ISO 2081:1986, IDT, Ed. 2

SANS 2082:1986/ISO 2082:1986, IDT, Ed. 2

SANS 2093:1986/ISO 2093:1986, IDT, Ed. 2

SANS 2106:1982/ISO 2106:1982, IDT, Ed. 2

SANS 2108:2005/ISO 2108:2005, IDT, Ed. 4

SANS 2135:1984/ISO 2135:1984, IDT, Ed. 2

SANS 2143:1981/ISO 2143:1981, IDT, Ed. 1

SANS 2177:2008/ISO 2177:2003, IDT, Ed. 3

SANS 2178:1982/ISO 2178:1982, IDT, Ed. 2

SANS 2179:1986/ISO 2179:1986, IDT, Ed. 2

SANS 2200:2005/CISPR 20:2005, IDT, Ed. 5.2

SANS Number

(SABS ISO 2060)

(SABS ISO 2061)

(SABS ISO 2062)

(SABS ISO 2063)

(SABS ISO 2064)

(SABS ISO 2076)

(SABS ISO 2081)

(SABS ISO 2082)

(SABS ISO 2093)

(SABS ISO 2106)

(SABS ISO 2135)

(SABS ISO 2143)

(SABS ISO 2177)

(SABS ISO 2178)

(SABS ISO 2179)


October 2009

1.02

1.01

1.01

1.01

1.01

1.01

1.01

1.02

1.01

1.01

1.01

1.01

1.01

1.01

1.02

1

1

1

1

1

Edition

Electrical security systems Part 1.1: Intruder alarmsystems - General requirements

Electrical security systems Part 1.2: Intruder alarmsystems: Infra-red beam interruption detectors

Electrical security systems Part 1-3: Intruder alarmsystems - Ultrasonic Doppler detectors

Electrical security systems Part 1-4: Intruder alarmsystems - Microwave Doppler detectors

Electrical security systems Part 1-5: Intruder alarmsystems - Passive infra-red detectors

Electrical security systems Part 1.6: Intruder alarmsystems - Passive glass-break detectors for use inbuildings

Electrical security systems Part 1.7: Intruder alarmsystems: Power units

Electrical security systems Part 1-8: Environmentaltesting

Electrical security systems Part 2-1: Access controlsystems: General characteristics

Electrical security systems Part 2-2: Access controlsystems: Central processor

Electrical security systems Part 2-3: Access controlsystems: Card readers

Electrical security systems Part 2.4: Access controlsystems: Reader controllers

Electrical security systems Part 2-5: Access controlsystems: Biometric readers

Electrical security systems Part 2-6: Access controlsystems: Access cards

Electrical security systems Part 2.7: Access controlsystems: Barriers

Rubber products - Guidelines for storage

General purpose thimbles for use with steel wireropes - Specification

Continuous tone controlled signalling system(CTCSS) for use in the land mobile services -Performance specification

Textile fabrics - Determination of the recovery fromcreasing of the horizontally folded specimen bymeasuring the angle of recovery

A signalling standard for trunked private land mobileradio systems

Title

SANS 2220-1-1:2006

SANS 2220-1-2:2006

SANS 2220-1-3:2006

SANS 2220-1-4:2007

SANS 2220-1-5:2007

SANS 2220-1-6:2007/IEC 60839-2-7:1994, NEQ, Ed.1

SANS 2220-1-7:2006

SANS 2220-1-8:2006

SANS 2220-2-1:2005

SANS 2220-2-2:2005

SANS 2220-2-3:2005

SANS 2220-2-4:2005

SANS 2220-2-5:2005

SANS 2220-2-6:2005

SANS 2220-2-7:2005

SANS 2230:2003/ISO 2230:2002, IDT, Ed. 2

SANS 2262:1984/ISO 2262:1984, IDT, Ed. 2

SANS 2306:1993/MPT 1306:1993, IDT

SANS 2313:2008/ISO 2313:1972, IDT, Ed. 1

SANS 2327:1991/MPT 1327:1991, IDT

SANS Number

(SABS 2220-1.1)

(SABS 2220-1.2)

(SABS 2220-1.3)

(SABS 2220-1.4)

(SABS 2220-1.5)

(SABS 2220-1.6)

(SABS 2220-1.7)

(SABS 2220-1.8)

(SABS 2220-2.1)

(SABS 2220-2.2)

(SABS 2220-2.3)

(SABS 2220-2.4)

(SABS 2220-2.5)

(SABS 2220-2.6)

(SABS 2220-2.7)

(SABS ISO 2262)

(SABS MPT 1306)

(SABS MPT 1327)


October 2009

2

1

2

2

2

1

2

1

1

1

1

2

2

2

1

1

1

1

1

1

Edition

Fork-lift trucks - Hook-on type fork arms and forkarm carriages - Mounting dimensions

Fork-lift trucks - Fork arms - Technicalcharacteristics and testing

System interface specification for radio units to beused with commercial trunked networks operating inBand III sub-bands 1 and 2

Radio interface specification for commercial trunkednetworks operating in Band III, sub-bands 1 and 2

Test schedule for the approval of radio units to beused with commercial trunked networks operating inBand III subbands 1 and 2

Electrodeposited nickel coatings on magnetic andnon-magnetic substrates - Measurement of coatingthickness - Magnetic method

Installation of mobile radio equipment in land basedvehicles

Lifting appliances - Range of maximum capacitiesfor basic models

General principles on reliability for structures

Rubber hoses, textile-reinforced, for compressed-air- Specification

Covered electrodes - Determination of the efficiency,metal recovery and deposition coefficient

Steel wire ropes for general purposes - Minimumrequirements

Paints and varnishes - Cross-cut test

Forged shackles for general lifting purposes - Deeshackles and bow shackles

Leather - Physical and mechanical tests -Determination of static absorption of water

Textile floor coverings - Vocabulary

Milk - Determination of fat content (Routine method)

Cream - Determination of fat content - Gravimetricmethod (Reference method)

Gas welding equipment - Pressure regulators forgas cylinders used in welding, cutting and alliedprocesses up to 300 bar

Thermoplastics pipes - Longitudinal reversion - Testmethod and parameters

Title

SANS 2328:2009/ISO 2328:2007, IDT, Ed. 3

SANS 2330:2007/ISO 2330:2002, IDT, Ed. 3

SANS 2343:1991/MPT 1343:1991, IDT

SANS 2347:1991/MPT 1347:1991, IDT

SANS 2352:1991/MPT 1352:1991, MOD

SANS 2361:1982/ISO 2361:1982, IDT, Ed. 2

SANS 2362:1997/MPT 1362:1997, IDT, Ed. 3

SANS 2374:2008/ISO 2374:1983, IDT, Ed. 1

SANS 2394:2003/ISO 2394:1998, IDT, Ed. 2

SANS 2398:2008/ISO 2398:2006, IDT, Ed. 5

SANS 2401:1972/ISO 2401:1972, IDT, Ed. 1

SANS 2408:2005/ISO 2408:2004, IDT, Ed. 3

SANS 2409:2008/ISO 2409:2007, IDT, Ed. 3

SANS 2415:2005/ISO 2415:2004, IDT, Ed. 3

SANS 2417:2009/ISO 2417:2002, IDT, Ed. 2

SANS 2424:1992/ISO 2424:1992, IDT, Ed. 3

SANS 2446:2005/ISO 2446:1976, IDT, Ed. 1

SANS 2450:2005/ISO 2450:1999, IDT, Ed. 3

SANS 2503:2007/ISO 2503:1998, IDT, Ed. 2

SANS 2505:2007/ISO 2505:2005, IDT, Ed. 2

SANS Number

(SABS MPT 1343)

(SABS MPT 1347)

(SABS MPT 1352)

(SABS ISO 2361)

(SABS MPT 1362)

(SABS ISO 2401)

(SABS ISO 2408)

(SABS ISO 2409)

(SABS ISO 2415)

(SABS ISO 2424)


October 2009

1

1

1

2

1

1

1

1

1

1

1

1

1

3

1

2

1

1

1

1

Edition

Thermoplastics pipes and fittings - Vicat softeningtemperature Part 1: General test method

Machine-made textile floor coverings -Determination of dimensional changes due to theeffects of varied water and heat conditions

Welded, brazed and soldered joints - Symbolicrepresentation on drawings

Welding consumables - Covered electrodes formanual metal arc welding of non-alloy and fine grainsteels - Classification

Steel - Conversion of elongation values Part 1:Carbon and low alloy steels

Pesticides and other agrochemicals - Principles forthe selection of common names

Leather - Physical and mechanical tests -Determination of thickness

Mechanical vibration and shock - Evaluation ofhuman exposure to whole-body vibration Part 1:General requirements

Information and documentation - Format forinformation exchange

Rubber, vulcanized - Determination of density

Documentation - Guidelines for the establishmentand development of monolingual thesauri

Information and documentation - International librarystatistics

Plain bearings - Sintered bushes - Dimensions andtolerances

Paints and varnishes - Determination of filmthickness

Paints and varnishes - Determination of density Part1: Pyknometer method

Paints and varnishes - Determination of speculargloss of non-metallic paint films at 20°, 60° and 85°

Paints and varnishes - Comparison of contrast ratio(hiding power) of paints of the same type and colour

Metallic coatings on metallic substrates -Electrodeposited and chemically deposited coatings- Review of methods available for testing adhesion

Sampling procedures for inspection by attributesPart 1: Sampling schemes indexed by acceptancequality limit (AQL) for lot-by-lot inspection

Sampling procedures for inspection by attributesPart 3: Skip-lot sampling procedures

Title

SANS 2507-1:1995/ISO 2507-1:1995, IDT, Ed. 1

SANS 2551:1981/ISO 2551:1981, IDT, Ed. 2

SANS 2553:1992/ISO 2553:1992, IDT, Ed. 3

SANS 2560:2008/ISO 2560:2002, IDT, Ed. 2

SANS 2566-1:2005/ISO 2566-1:1984, IDT, Ed. 2

SANS 2570:2006/ISO 257:2004, IDT, Ed. 3

SANS 2589:2009/ISO 2589:2002, IDT, Ed. 2

SANS 2631-1:1997/ISO 2631-1:1997, IDT, Ed. 2

SANS 2709:2008/ISO 2709:2008, IDT, Ed. 4

SANS 2781:2003/ISO 2781:1988, IDT, Ed. 3

SANS 2788:2005/ISO 2788:1986, IDT, Ed. 2

SANS 2789:2009/ISO 2789:2006, IDT, Ed. 4

SANS 2795:2005/ISO 2795:1991, IDT, Ed. 4

SANS 2808:2008/ISO 2808:2007, IDT, Ed. 4

SANS 2811-1:1997/ISO 2811-1:1997, IDT, Ed. 1

SANS 2813:1994/ISO 2813:1994, IDT, Ed. 3

SANS 2814:1973/ISO 2814:1973, IDT, Ed. 1

SANS 2819:1980/ISO 2819:1980, IDT, Ed. 2

SANS 2859-1:2004/ISO 2859-1:1999, IDT, Ed. 2

SANS 2859-3:2008/ISO 2859-3:2005, IDT, Ed. 2

SANS Number

(SABS ISO 2507-1)

(SABS ISO 2551)

(SABS ISO 2553)

(SABS ISO 2560)

(SABS ISO 2631-1)

(SABS ISO 2808)

(SABS ISO 2811-1)

(SABS ISO 2813)

(SABS ISO 2814)

(SABS ISO 2819)


October 2009

1

1

1

1

2

1

1

1

1

2

1

1

1

1

1

1

1

1

1

Edition

Sampling procedures for inspection by attributesPart 4: Procedures for assessment of declaredquality levels

Sampling procedures for inspection by attributesPart 5: System of sequential sampling plans indexedby acceptance quality limit (AQL) for lot-by-lotinspection

Sampling procedures for inspection by attributesPart 10: Introduction to the ISO 2859 series ofstandards for sampling for inspection by attributes

Earth-moving machinery - Minimum accessdimensions

Earth-moving machinery - Access systems

Rubber, vulcanized - Antistatic and conductiveproducts - Determination of electrical resistance

Rubber, vulcanized - Antistatic and conductiveproducts for hospital use - Electrical resistance limits

Rubber, vulcanized - Antistatic and conductiveproducts for industrial use - Electrical resistancelimits

Anodizing of aluminium and its alloys - Assessmentof quality of sealed anodic oxide coatings bymeasurement of admittance or impedance

Railway safety management Part 1: General

Railway safety management Part 2-1: Technicalrequirements for engineering and operationalstandards - General

Railway safety management Part 2-2: Technicalrequirements for engineering and operationalstandards - Track, civil and electrical infrastructure

Railway safety management Part 2-3: Technicalrequirements for engineering and operationalstandards - Rolling stock

Civil engineering test methods Part PR1:Determination of uncertainty of measurement,repeatability, reproducibility and bias

Civil engineering test methods Part GR1: Wetpreparation and particle size analysis

Civil engineering test methods Part AG1: Particlesize analysis of aggregates by sieving

Civil engineering test methods Part GR2: Drypreparation and dry particle size analysis of gradedmaterials

Civil engineering test methods Part AG2:Determination of the average least dimension ofaggregates by direct measurement

Civil engineering test methods Part AG3:Determination of the average least dimension ofaggregates by computation

Title

SANS 2859-4:2008/ISO 2859-4:2002, IDT, Ed. 2

SANS 2859-5:2008/ISO 2859-5:2005, IDT, Ed. 1

SANS 2859-10:2008/ISO 2859-10:2006, IDT, Ed. 1

SANS 2860:2003/ISO 2860:1992, IDT, Ed. 4

SANS 2867:2008/ISO 2867:2006, IDT, Ed. 6

SANS 2878:2003/ISO 2878:1987, IDT, Ed. 2

SANS 2882:2003/ISO 2882:1979, IDT, Ed. 1

SANS 2883:2003/ISO 2883:1980, IDT, Ed. 1

SANS 2931:1983/ISO 2931:1983, IDT, Ed. 2

SANS 3000-1:2009

SANS 3000-2-1:2008

SANS 3000-2-2:2008

SANS 3000-2-3:2008

SANS 3001-PR1:2008

SANS 3001-GR1:2008

SANS 3001-AG1:2009

SANS 3001-GR2:2009

SANS 3001-AG2:2009

SANS 3001-AG3:2009

SANS Number

(SABS ISO 2931)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

2

1

1

1

1

1

Edition

Civil engineering test methods Part AG4:Determination of the flakiness index of coarseaggregate

Civil engineering test methods Part PR5:Computation of soil-mortar percentages, coarsesand ratio, grading modulus and fineness modulus

Civil engineering test methods Part PR10: Checking,handling, maintenance and verification of test sieves

Civil engineering test methods Part GR10:Determination of the one-point liquid limit, plasticlimit, plasticity index and linear shrinkage

Civil engineering test methods Part GR11:Determination of the liquid limit with the two-pointmethod

Civil engineering test methods Part GR12:Determination of the flow curve liquid limit

Civil engineering test methods Part GR20:Determination of the moisture content by oven-drying

Non-calibrated round steel link lifting chain andchain slings - Use and maintenance

Non-destructive testing - Penetrant testing andmagnetic particle testing - Viewing conditions

Textiles - Determination of pH of aqueous extract

Wool - Determination of dichloromethane-solublematter in combed sliver

Short-link chain for lifting purposes - Grade T (typesT, DAT and DT), fine-tolerance hoist chain

Rolling bearings - Needle rollers - Dimensions andtolerances

Dentistry - Dental zinc oxide/eugenol cements andzinc oxide/non-eugenol cements

Plastics piping systems - Plastics components -Determination of dimensions

Thermoplastics pipes - Determination of resistanceto external blows - Round-the-clock method

Codes for the representation of names of countriesand their subdivisions Part 1: Country codes

Codes for the representation of names of countriesand their subdivisions Part 2: Country subdivisioncode

Codes for the representation of names of countriesand their subdivisions Part 3: Code for formerly usednames of countries

Sockets for wire ropes for general purposes Part 1:General characteristics and conditions ofacceptance

Title

SANS 3001-AG4:2009

SANS 3001-PR5:2009

SANS 3001-PR10:2009

SANS 3001-GR10:2008

SANS 3001-GR11:2008

SANS 3001-GR12:2008

SANS 3001-GR20:2008

SANS 3056:1986/ISO 3056:1986, IDT, Ed. 2

SANS 3059:2004/ISO 3059:2001, IDT, Ed. 2

SANS 3071:2007/ISO 3071:2005, IDT, Ed. 3

SANS 3074:2003/ISO 3074:1975, IDT, Ed. 1

SANS 3077:2008/ISO 3077:2001, IDT, Ed. 3

SANS 3096:2005/ISO 3096:1996, IDT, Ed. 2

SANS 3107:2008/ISO 3107:2004, IDT, Ed. 3

SANS 3126:2008/ISO 3126:2005, IDT, Ed. 2

SANS 3127:1994/ISO 3127:1994, IDT, Ed. 1

SANS 3166-1:2007/ISO 3166-1:2006, IDT, Ed. 2

SANS 3166-2:2008/ISO 3166-2:2007, IDT, Ed. 2

SANS 3166-3:2005/ISO 3166-3:1999, IDT, Ed. 1

SANS 3189-1:1985/ISO 3189-1:1985, IDT, Ed. 1

SANS Number

(SABS ISO 3056)

(SABS ISO 3126)

(SABS ISO 3127)

(SABS ISO 3189-1)


October 2009

1

1

1

1

1

2

1

1

1

1

1

1

1

1

1

1

2

1

1

2

Edition

Sockets for wire ropes for general purposes Part 2:Special requirements for sockets produced byforging or machined from the solid

Sockets for wire ropes for general purposes Part 3:Special requirements for sockets produced bycasting

Anodizing of aluminium and its alloys - Assessmentof quality of sealed anodic oxide coatings bymeasurement of the loss of mass after immersion inphosphoric-chromic acid solution

Rolling bearings - Cast and pressed housings forinsert bearings

Paints and varnishes - Determination of percentagevolume of non-volatile matter by measuring thedensity of a dried coating

Paints, varnishes and plastics - Determination ofnon-volatile-matter content

Gas welding equipment - Hose connections forequipment for welding, cutting and allied processes

Paints and varnishes and their raw materials -Temperatures and humidities for conditioning andtesting

Information and documentation - Internationalstandard serial number (ISSN)

Statistical interpretation of data - Comparison of twomeans in the case of paired observations

Rubber - Tolerances for products Part 1:Dimensional tolerances

Rubber - Tolerances for products Part 2:Geometrical tolerances

Test sieves - Technical requirements and testingPart 1: Test sieves of metal wire cloth

Test sieves - Technical requirements and testingPart 2: Test sieves of perforated metal plate

Rubber - Determination of crystallization effects byhardness measurements

Industrial liquid lubricants - ISO viscosityclassification

Earth-moving machinery - Falling-object protectivestructures - Laboratory tests and performancerequirements

Earth-moving machinery - Braking systems ofrubber-tyred machines - Systems and performancerequirements and test procedures

Non-destructive testing - Penetrant testing Part 1:General principles

Non-destructive testing - Penetrant testing Part 2:Testing of penetrant materials

Title

SANS 3189-2:1985/ISO 3189-2:1985, IDT, Ed. 1

SANS 3189-3:1985/ISO 3189-3:1985, IDT, Ed. 1

SANS 3210:1983/ISO 3210:1983, IDT, Ed. 2

SANS 3228:2005/ISO 3228:1993, IDT, Ed. 3

SANS 3233:1998/ISO 3233:1998, IDT, Ed. 3

SANS 3251:2007/ISO 3251:2003, IDT, Ed. 3

SANS 3253:2004/ISO 3253:1998, IDT, Ed. 2

SANS 3270:1984/ISO 3270:1984, IDT, Ed. 3

SANS 3297:2009/ISO 3297:2007, IDT, Ed. 4

SANS 3301:2004/ISO 3301:1975, IDT, Ed. 1

SANS 3302-1:2003/ISO 3302-1:1996, IDT, Ed. 1

SANS 3302-2:2003/ISO 3302-2:1998, IDT, Ed. 1

SANS 3310-1:2000/ISO 3310-1:2000, IDT, Ed. 4

SANS 3310-2:1999/ISO 3310-2:1999, IDT, Ed. 4

SANS 3387:2003/ISO 3387:1994, IDT, Ed. 2

SANS 3448:2008/ISO 3448:1992, IDT, Ed. 2

SANS 3449:2008/ISO 3449:2005, IDT, Ed. 5

SANS 3450:2003/ISO 3450:1996, IDT, Ed. 3

SANS 3452-1:2009/ISO 3452-1:2008, IDT, Ed. 1

SANS 3452-2:2009/ISO 3452-2:2006, IDT, Ed. 2

SANS Number

(SABS ISO 3189-2)

(SABS ISO 3189-3)

(SABS ISO 3210)

(SABS ISO 3233)

(SABS ISO 3251)

(SABS ISO 3270)

(SABS ISO 3310-1)

(SABS ISO 3310-2)

(SABS ISO 3452-2)


October 2009

1

1

2

2

1

2

2

1

2

1

2

2

2

2

2

1

1

1

1

1

Edition

Non-destructive testing - Penetrant testing Part 3:Reference test blocks

Non-destructive testing - Penetrant testing Part 4:Equipment

Earth-moving machinery - Roll-over protectivestructures - Laboratory tests and performancerequirements

Metallic coatings - Measurement of coatingthickness - X-ray spectrometric methods

Heavy-duty cranked-link transmission chains

Statistics - Vocabulary and symbols Part 1: Generalstatistical terms and terms used in probability

Statistics - Vocabulary and symbols Part 2: Appliedstatistics

Statistics - Vocabulary and symbols Part 3: Designof experiments

Metallic and non-metallic coatings - Measurement ofthickness - Beta backscatter method

Plain bearings - Thin-walled half bearings with orwithout flange - Tolerances, design features andmethods of test

Cold-reduced carbon steel sheet of commercial anddrawing qualities

Continuous hot-dip zinc-coated carbon steel sheetof commercial and drawing qualities

Welding consumables - Covered electrodes formanual metal arc welding of creep-resisting steels -Classification

Welding consumables - Covered electrodes formanual metal arc welding of stainless and heat-resisting steels - Classification

Chromate conversion coatings on zinc, cadmium,aluminium-zinc alloys and zinc-aluminium alloys -Test methods

Animal and vegetable fats and oils - Determinationof saponification value

Paints and varnishes - Visual comparison of thecolour of paints

Water for analytical laboratory use - Specificationand test methods

Acoustics - Determination of sound power levels ofnoise sources using sound pressure - Precisionmethods for reverberation rooms

Acoustics - Determination of sound power levels ofnoise sources - Engineering methods for small,movable sources in reverberant fields Part 1:Comparison method for hard-walled test rooms

Title

SANS 3452-3:1998/ISO 3452-3:1998, IDT, Ed. 1

SANS 3452-4:1998/ISO 3452-4:1998, IDT, Ed. 1

SANS 3471:2009/ISO 3471:2008, IDT, Ed. 4

SANS 3497:2008/ISO 3497:2000, IDT, Ed. 2

SANS 3512:2006/ISO 3512:1992, IDT, Ed. 2

SANS 3534-1:2007/ISO 3534-1:2006, IDT, Ed. 2

SANS 3534-2:2007/ISO 3534-2:2006, IDT, Ed. 2

SANS 3534-3:2004/ISO 3534-3:1999, IDT, Ed. 2

SANS 3543:2008/ISO 3543:2000, IDT, Ed. 2

SANS 3548:2005/ISO 3548:1999, IDT, Ed. 2

SANS 3574:2003/ISO 3574:1999, IDT, Ed. 3

SANS 3575:2008/ISO 3575:2005, IDT, Ed. 3

SANS 3580:2006/ISO 3580:2004, IDT, Ed. 2

SANS 3581:2008/ISO 3581:2003, IDT, Ed. 2

SANS 3613:2008/ISO 3613:2000, IDT, Ed. 2

SANS 3657:2003/ISO 3657:2002, IDT, Ed. 3

SANS 3668:1998/ISO 3668:1998, IDT, Ed. 2

SANS 3696:1987/ISO 3696:1987, IDT, Ed. 1

SANS 3741:1999/ISO 3741:1999, IDT, Ed. 3

SANS 3743-1:1994/ISO 3743-1:1994, IDT, Ed. 1

SANS Number

(SABS ISO 3452-3)

(SABS ISO 3452-4)

(SABS ISO 3497)

(SABS ISO 3543)

(SABS ISO 3574)

(SABS ISO 3575)

(SABS ISO 3580)

(SABS ISO 3581)

(SABS ISO 3613)

(SABS ISO 3668)

(SABS ISO 3696)

(SABS ISO 3741)

(SABS ISO 3743-1)


October 2009

1

1

1

2

1

1

1

1

2

2

2

2

1

1

2

2

1

1

Edition

Acoustics - Determination of sound power levels ofnoise sources using sound pressure - Engineeringmethods for small, movable sources in reverberantfields Part 2: Methods for special reverberation testrooms

Acoustics - Determination of sound power levels ofnoise sources using sound pressure - Engineeringmethod in an essentially free field over a reflectingplane

Acoustics - Determination of sound power levels ofnoise sources using sound pressure - Surveymethod using an enveloping measurement surfaceover a reflecting plane

Textiles - Preparation, marking and measuring offabric specimens and garments in tests fordetermination of dimensional change

Road vehicles - Vehicle identification number (VIN) -Content and structure

Road vehicles - World manufacturer identifier (WMI)code

Road vehicles, and tractors and machinery foragriculture and forestry - Determination of burningbehaviour of interior materials

Gas welding equipment - Rubber hoses for welding,cutting and allied processes

Quality requirements for fusion welding of metallicmaterials Part 1: Criteria for the selection of theappropriate level of quality requirements

Quality requirements for fusion welding of metallicmaterials Part 2: Comprehensive qualityrequirements

Quality requirements for fusion welding of metallicmaterials Part 3: Standard quality requirements

Quality requirements for fusion welding of metallicmaterials Part 4: Elementary quality requirements

Quality requirements for fusion welding of metallicmaterials Part 5: Documents with which it isnecessary to conform to claim conformity to thequality requirements of ISO 3834-2, ISO 3834-3 orISO 3834-4

Quality requirements for fusion welding of metallicmaterials Part 6: Guidelines on implementing ISO3834

Metallic and other inorganic coatings - Review ofmethods of measurement of thickness

Conversion coatings on metallic materials -Determination of coating mass per unit area -Gravimetric methods

Road vehicles - Wheels/rims for commercialvehicles - Test methods

Information and documentation - Internationalstandard recording code (ISRC)

Title

SANS 3743-2:1994/ISO 3743-2:1994, IDT, Ed. 1

SANS 3744:1994/ISO 3744:1994, IDT, Ed. 2

SANS 3746:1995/ISO 3746:1995, IDT, Ed. 2

SANS 3759:2008/ISO 3759:2007, IDT, Ed. 4

SANS 3779:1983/ISO 3779:1983, IDT, Ed. 3

SANS 3780:1983/ISO 3780:1983, IDT, Ed. 2

SANS 3795:1989/ISO 3795:1989, IDT, Ed. 2

SANS 3821:2004/ISO 3821:1998, IDT, Ed. 3

SANS 3834-1:2006/ISO 3834-1:2005, IDT, Ed. 2

SANS 3834-2:2006/ISO 3834-2:2005, IDT, Ed. 2

SANS 3834-3:2006/ISO 3834-3:2005, IDT, Ed. 2

SANS 3834-4:2006/ISO 3834-4:2005, IDT, Ed. 2

SANS 3834-5:2006/ISO 3834-5:2005, IDT, Ed. 1

SANS 3834-6:2009/ISO/TR 3834-6:2007, IDT, Ed. 1

SANS 3882:2008/ISO 3882:2003, IDT, Ed. 3

SANS 3892:2000/ISO 3892:2000, IDT, Ed. 2

SANS 3894:2007/ISO 3894:2005, IDT, Ed. 3

SANS 3901:2009/ISO 3901:2001, IDT, Ed. 2

SANS Number

(SABS ISO 3743-2)

(SABS ISO 3744)

(SABS ISO 3746)

(SABS ISO 3759)

(SABS ISO 3779)

(SABS ISO 3780)

(SABS ISO 3795)

(SABS ISO 3882)

(SABS ISO 3892)


October 2009

1

1

1

1

1

1

1

1

1

2

1

1

2

2

1

1

1

1

Edition

Dentistry - Designation system for teeth and areas ofthe oral cavity

Sampling procedures for inspection by variablesPart 1: Specification for single sampling plansindexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and asingle AQL

Sampling procedures for inspection by variablesPart 2: General specification for single samplingplans indexed by acceptance quality limit (AQL) forlot-by-lot inspection of independent qualitycharacteristics

Sampling procedures for inspection by variablesPart 3: Double sampling schemes indexed byacceptance quality limit (AQL) for lot-by-lotinspection

Sampling procedures for inspection by variablesPart 5: Sequential sampling plans indexed byacceptance quality limit (AQL) for inspection byvariables (known standard deviation)

Road vehicles - Brake hose assemblies for hydraulicbraking systems used with non-petroleum-basebrake fluid

Road vehicles - Vehicle identification number (VIN) -Location and attachment

Methods for determination of fibre length by combsorter diagram

Leather - Determination of sulphated total ash andsulphated water-insoluble ash

Welding and allied processes - Nomenclature ofprocesses and reference numbers

Thermoplastics pipes - Universal wall thicknesstable

Natural latex rubber condoms - Requirements andtest methods

Road vehicles - Connectors for the electricalconnection of towing and towed vehicles -Definitions, tests and requirements

Destructive tests on welds in metallic materials -Transverse tensile test

Codes for the representation of currencies andfunds

Cranes and lifting appliances - Classification Part 1:General

Lifting appliances - Classification - Part 2: Mobilecranes

Cranes - Classification - Part 3: Tower cranes

Title

SANS 3950:2008/ISO 3950:1995, IDT, Ed. 2

SANS 3951-1:2008/ISO 3951-1:2005, IDT, Ed. 1

SANS 3951-2:2008/ISO 3951-2:2006, IDT, Ed. 1

SANS 3951-3:2008/ISO 3951-3:2007, IDT, Ed. 1

SANS 3951-5:2008/ISO 3951-5:2006, IDT, Ed. 1

SANS 3996:2007/ISO 3996:1995, IDT, Ed. 3

SANS 4030:1983/ISO 4030:1983, IDT, Ed. 2

SANS 4044:2007/BS 4044:1989, IDT, Ed. 2

SANS 4047:1977/ISO 4047:1977, IDT, Ed. 1

SANS 4063:2005/ISO 4063:1998, IDT, Ed. 3

SANS 4065:1996/ISO 4065:1996, IDT, Ed. 2

SANS 4074:2003/ISO 4074:2002, IDT, Ed. 1

SANS 4091:2005/ISO 4091:2003, IDT, Ed. 3

SANS 4136:2004/ISO 4136:2001, IDT, Ed. 2

SANS 4217:2009/ISO 4217:2008, IDT, Ed. 7

SANS 4301-1:2002/ISO 4301-1:1986, IDT, Ed. 2

SANS 4301-2:2002/ISO 4301-2:1985, IDT, Ed. 1

SANS 4301-3:2002/ISO 4301-3:1993, IDT, Ed. 1

SANS Number

(SABS ISO 4030)

(SABS ISO 4047)

(SABS ISO 4063)

(SABS ISO 4065)

(SABS ISO 4091)

(SABS ISO 4136)


October 2009

1

1

1

1

1

2

1

2

1

2

1

1

1

1

1

1

1

1

1

1

Edition

Cranes - Classification Part 5: Overhead travellingand portal bridge cranes

Cranes - Wind load assessment

Cranes other than mobile and floating cranes -General requirements for stability

Mobile cranes - Determination of stability

Cranes - Vocabulary Part 3: Tower cranes

Cranes and lifting appliances - Selection of wireropes Part 1: General

Cranes and lifting appliances - Selection of wireropes Part 2: Mobile cranes - Coefficient ofutilization

Cranes - Wire ropes - Care, maintenance,installation, examination and discard

Cranes - Test code and procedures

Steel wire ropes for lifts - Minimum requirements

Leaf-chains, clevises and sheaves - Dimensions,measuring forces and tensile strengths

Flat-top chains and associated chain wheels forconveyors

Standard test methods for cyanides in water -Automated methods for total cyanide, weak aciddissociable cyanide, and thiocyanate

Plain bearings - Terms, definitions and classificationPart 1: Design, bearing materials and theirproperties

Plain bearings - Terms, definitions and classificationPart 2: Friction and wear

Plain bearings - Terms, definitions and classificationPart 3: Lubrication

Plain bearings - Copper alloy bushes

Plain bearings - Lead and tin casting alloys formultilayer plain bearings

Plain bearings - Copper alloys Part 1: Cast copperalloys for solid and multilayer thick-walled plainbearings

Plain bearings - Copper alloys Part 2: Wroughtcopper alloys for solid plain bearings

Title

SANS 4301-5:1991/ISO 4301-5:1991, IDT, Ed. 1

SANS 4302:2002/ISO 4302:1981, IDT, Ed. 1

SANS 4304:2008/ISO 4304:1987, IDT, Ed. 1

SANS 4305:2007/ISO 4305:1991, IDT, Ed. 2

SANS 4306-3:2007/ISO 4306-3:2003, IDT, Ed. 3

SANS 4308-1:2005/ISO 4308-1:2003, IDT, Ed. 3

SANS 4308-2:2007/ISO 4308-2:1988, IDT, Ed. 1

SANS 4309:2005/ISO 4309:2004, IDT, Ed. 3

SANS 4310:2002/ISO 4310:1981, IDT, Ed. 1

SANS 4344:2005/ISO 4344:2004, IDT, Ed. 2

SANS 4347:2006/ISO 4347:2004, IDT, Ed. 4

SANS 4348:1983/ISO 4348:1983, IDT, Ed. 2

SANS 4374:2007/ASTM D 4374:2006, IDT

SANS 4378-1:2005/ISO 4378-1:1997, IDT, Ed. 2

SANS 4378-2:2005/ISO 4378-2:1983, IDT, Ed. 1

SANS 4378-3:2005/ISO 4378-3:1983, IDT, Ed. 1

SANS 4379:2005/ISO 4379:1993, IDT, Ed. 2

SANS 4381:2005/ISO 4381:2000, IDT, Ed. 3

SANS 4382-1:2005/ISO 4382-1:1991, IDT, Ed. 2

SANS 4382-2:2005/ISO 4382-2:1991, IDT, Ed. 2

SANS Number

(SABS ISO 4301-5)

(SABS ISO 4308-1)

(SABS ISO 4309)

(SABS ISO 4344)

(SABS ISO 4348)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

2

2

1

1

1

1

1

1

Edition

Plain bearings - Multilayer materials for thin-walledplain bearings

Plain bearings - Hardness testing of bearing metalsPart 1: Compound materials

Plain bearings - Hardness testing of bearing metalsPart 2: Solid materials

Plain bearings - Compression testing of metallicbearing materials

Plain bearings - Metallic multilayer plain bearingsPart 1: Non-destructive ultrasonic testing of bond

Plain bearings - Metallic multilayer plain bearingsPart 2: Destructive testing of bond for bearing metallayer thicknesses >= 2mm

Plain bearings - Metallic multilayer plain bearingsPart 3: Non-destructive penetrant testing

Polyethylene (PE) pipes for water supply -Specifications

Plastics piping systems - Polyethylene (PE) pipesand fittings for water supply - Part 1: General

Plastics piping systems - Polyethylene (PE) pipesand fittings for water supply - Part 2: Pipes

Plastics piping systems - Polyethylene (PE) pipesand fittings for water supply - Part 3: Fittings

Plastics piping systems - Polyethylene (PE) pipesand fittings for water supply - Part 5: Fitness forpurpose of the system

Buried polyethylene (PE) pipes for the supply ofgaseous fuels - Metric series - Specifications

Metallic and other inorganic coatings - Vickers andKnoop microhardness tests

Metallic coatings - Measurement of coatingthickness - Profilometric method

Electrodeposited metallic coatings and relatedfinishes - Sampling procedures for inspection byattributes

Chromate conversion coatings on electroplated zincand cadmium coatings

Metallic coatings - Electrodeposited silver and silveralloy coatings for engineering purposes

Metallic coatings - Test methods forelectrodeposited silver and silver alloy coatings Part1: Determination of coating thickness

Metallic coatings - Test methods forelectrodeposited silver and silver alloy coatings Part2: Adhesion tests

Title

SANS 4383:2005/ISO 4383:2000, IDT, Ed. 3

SANS 4384-1:2005/ISO 4384-1:2000, IDT, Ed. 2

SANS 4384-2:2005/ISO 4384-2:1982, IDT, Ed. 1

SANS 4385:2005/ISO 4385:1981, IDT, Ed. 1

SANS 4386-1:2005/ISO 4386-1:1992, IDT, Ed. 2

SANS 4386-2:2005/ISO 4386-2:1982, IDT, Ed. 1

SANS 4386-3:2005/ISO 4386-3:1992, IDT, Ed. 1

SANS 4427:1996/ISO 4427:1996, IDT, Ed. 1

SANS 4427-1:2008/ISO 4427-1:2007, IDT, Ed. 1

SANS 4427-2:2008/ISO 4427-2:2007, IDT, Ed. 1

SANS 4427-3:2008/ISO 4427-3:2007, IDT, Ed. 1

SANS 4427-5:2008/ISO 4427-5:2007, IDT, Ed. 1

SANS 4437:2008/ISO 4437:2007, IDT, Ed. 3

SANS 4516:2008/ISO 4516:2002, IDT, Ed. 2

SANS 4518:1980/ISO 4518:1980, IDT, Ed. 1

SANS 4519:1980/ISO 4519:1980, IDT, Ed. 1

SANS 4520:1981/ISO 4520:1981, IDT, Ed. 1

SANS 4521:1985/ISO 4521:1985, IDT, Ed. 1

SANS 4522-1:1985/ISO 4522-1:1985, IDT, Ed. 1

SANS 4522-2:1985/ISO 4522-2:1985, IDT, Ed. 1

SANS Number

(SABS ISO 4427)

(SABS ISO 4437)

(SABS ISO 4516)

(SABS ISO 4518)

(SABS ISO 4519)

(SABS ISO 4520)

(SABS ISO 4521)

(SABS ISO 4522-1)

(SABS ISO 4522-2)


October 2009

1

1

1

2

1

1

1

1

2

2

1

1

1

1

1

1

1

1

Edition

Metallic coatings - Test methods forelectrodeposited silver and silver alloy coatings Part3: Determination of the presence of residual salts

Metallic coatings - Electrodeposited gold and goldalloy coatings for engineering purposes

Metallic coatings - Test methods forelectrodeposited gold and gold alloy coatings Part 1:Determination of coating thickness

Metallic coatings - Test methods forelectrodeposited gold and gold alloy coatings Part 2:Mixed flowing gas (MFG) environmental tests

Metallic coatings - Test methods forelectrodeposited gold and gold alloy coatings Part 3:Electrographic tests for porosity

Metallic coatings - Test methods forelectrodeposited gold and gold alloy coatings Part 4:Determination of gold content

Metallic coatings - Test methods forelectrodeposited gold and gold alloy coatings Part 5:Adhesion tests

Metallic coatings - Test methods forelectrodeposited gold and gold alloy coatings Part 6:Determination of the presence of residual salts

Metallic coatings - Electroplated coatings of nickelplus chromium on plastics materials

Metallic coatings - Electroplated coatings of nickelfor engineering purposes

Metallic coatings - Thioacetamide corrosion test(TAA test)

Metallic and other non-organic coatings - Corrodkotecorrosion test (CORR test)

Small craft with inboard engine - Propeller shaftends and bosses with 1:10 taper

High-pressure decorative laminates - Sheets madefrom thermosetting resins Part 1: Classification andspecifications

High-pressure decorative laminates - Sheets madefrom thermosetting resins Part 2: Determination ofproperties

Plastics - Film and sheeting - Determination ofaverage thickness of a sample, and averagethickness and yield of a roll, by gravimetrictechniques (gravimetric thickness)

Plastics - Film and sheeting - Determination ofthickness by mechanical scanning

Paints and varnishes - Pull-off test for adhesion

Title

SANS 4522-3:1988/ISO 4522-3:1988, IDT, Ed. 1

SANS 4523:1985/ISO 4523:1985, IDT, Ed. 1

SANS 4524-1:1985/ISO 4524-1:1985, IDT, Ed. 1

SANS 4524-2:2007/ISO 4524-2:2000, IDT, Ed. 2

SANS 4524-3:1985/ISO 4524-3:1985, IDT, Ed. 1

SANS 4524-4:1985/ISO 4524-4:1985, IDT, Ed. 1

SANS 4524-5:1985/ISO 4524-5:1985, IDT, Ed. 1

SANS 4524-6:1988/ISO 4524-6:1988, IDT, Ed. 1

SANS 4525:2007/ISO 4525:2003, IDT, Ed. 2

SANS 4526:2007/ISO 4526:2004, IDT, Ed. 2

SANS 4538:1978/ISO 4538:1978, IDT, Ed. 1

SANS 4541:1978/ISO 4541:1978, IDT, Ed. 1

SANS 4566:2008/ISO 4566:1992, IDT, Ed. 2

SANS 4586-1:1995/ISO 4586-1:1995, IDT

SANS 4586-2:1997/ISO 4586-2:1997, IDT, Ed. 4

SANS 4591:2003/ISO 4591:1992, IDT, Ed. 2

SANS 4593:2003/ISO 4593:1993, IDT, Ed. 2

SANS 4624:2008/ISO 4624:2002, IDT, Ed. 2

SANS Number

(SABS ISO 4522-3)

(SABS ISO 4523)

(SABS ISO 4524-1)

(SABS ISO 4524-2)

(SABS ISO 4524-3)

(SABS ISO 4524-4)

(SABS ISO 4524-5)

(SABS ISO 4524-6)

(SABS ISO 4525)

(SABS ISO 4526)

(SABS ISO 4538)

(SABS ISO 4541)

(SABS ISO 4586-1)

(SABS ISO 4586-2)


October 2009

2

2

2

2

2

2

1

1

1

1

1

1

1

1

2

1

Edition

Paints and varnishes - Evaluation of degradation ofcoatings - Designation of quantity and size ofdefects, and of intensity of uniform changes inappearance Part 1: General introduction anddesignation system

Paints and varnishes - Evaluation of degradation ofcoatings - Designation of quantity and size ofdefects, and of intensity of uniform changes inappearance Part 2: Assessment of degree ofblistering

Paints and varnishes - Evaluation of degradation ofcoatings - Designation of quantity and size ofdefects, and of intensity of uniform changes inappearance Part 3: Assessment of degree of rusting

Paints and varnishes - Evaluation of degradation ofcoatings - Designation of quantity and size ofdefects, and of intensity of uniform changes inappearance Part 4: Assessment of degree ofcracking

Paints and varnishes - Evaluation of degradation ofcoatings - Designation of quantity and size ofdefects, and of intensity of uniform changes inappearance Part 5: Assessment of degree of flaking

Paints and varnishes - Evaluation of degradation ofcoatings - Designation of quantity and size ofdefects, and of intensity of uniform changes inappearance Part 6: Assessment of degree ofchalking by tape method

Rubber seals - Joint rings for water supply, drainageand sewerage pipelines - Specification for materials

Rubber, vulcanized - Preformed compression sealsfor use between concrete motorway paving sections- Specification for material

Rubber products - Hoses, non-collapsible, for fire-fighting service

Rubber - Vulcanized or thermoplastic -Determination of abrasion resistance using arotating cylindrical drum device

Rubber, vulcanized - Preparation of samples andtest pieces Part 2: Chemical tests

Rubber - Determination of rebound resilience ofvulcanizates

Rubber - Determination of dynamic behaviour ofvulcanizates at low frequencies - Torsion pendulummethod

Rubber - Guide to the determination of dynamicproperties

Gas cylinders - Refillable welded steel cylinders -Test pressure 60 bar and below

Copper and copper alloys - Determination of tincontent - Spectrometric method

Title

SANS 4628-1:2004/ISO 4628-1:2003, IDT, Ed. 3

SANS 4628-2:2004/ISO 4628-2:2003, IDT, Ed. 2

SANS 4628-3:2004/ISO 4628-3:2003, IDT, Ed. 2

SANS 4628-4:2004/ISO 4628-4:2003, IDT, Ed. 2

SANS 4628-5:2004/ISO 4628-5:2003, IDT, Ed. 2

SANS 4628-6:2007/ISO 4628-6:2007, IDT, Ed. 2

SANS 4633:2008/ISO 4633:2002, IDT, Ed. 3

SANS 4635:2004/ISO 4635:1982, IDT, Ed. 1

SANS 4642:2007/ISO 4642:1978, IDT, Ed. 1

SANS 4649:2003/ISO 4649:2002, IDT, Ed. 2

SANS 4661-2:2003/ISO 4661-2:1987, IDT, Ed. 1

SANS 4662:2003/ISO 4662:1986, IDT, Ed. 2

SANS 4663:2003/ISO 4663:1986, IDT, Ed. 3

SANS 4664:2003/ISO 4664:1998, IDT, Ed. 3

SANS 4706:2009/ISO 4706:2008, IDT, Ed. 2

SANS 4751:1984/ISO 4751:1984, IDT, Ed. 1

SANS Number

(SABS ISO 4628-1)

(SABS ISO 4628-2)

(SABS ISO 4628-3)

(SABS ISO 4628-4)

(SABS ISO 4628-5)

(SABS ISO 4628-6)

(SABS ISO 4751)


October 2009

1

1

1

2

2

2

2

2

1

1

1

1

2

2

2

2

2

3

3

Edition

Chain slings of welded construction - Grades M(4),S(6) and T(8)

Laboratory glassware - Volumetric glassware -Methods for use and testing of capacity

Laboratory glassware - Graduated measuringcylinders

Laboratory glassware - Graduated measuringcylinders

Laboratory glassware - Separating funnels anddropping funnels

Microbiology of food and animal feeding stuffs -Horizontal method for the detection andenumeration of coliforms - Most probable numbertechnique

Microbiology of feed and animal feeding stuffs -Horizontal method for the enumeration of coliforms -Colony-count technique

Microbiology of food and animal feeding stuffs -Horizontal method for the enumeration ofmicroorganisms - Colony-count technique at 30 °C

Mechanical vibration and shock - Vibration ofbuildings - Guidelines for the measurement ofvibrations and evaluation of their effects on buildings

Plastics - Methods of exposure to laboratory lightsources Part 2: Xenon-arc lamps

Textile floor coverings - Determination of wear -Castor chair test

Carpets - Determination of tuft withdrawal force

Knitting - Basic concepts - Vocabulary

Road vehicles - Elastomeric cups and seals forcylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Servicetemperature 120 °C max.)

Road vehicles - Elastomeric seals for hydraulic discbrake cylinders using a non-petroleum basehydraulic brake fluid (Service temperature 150 °Cmax.)

Continuous hot-dip zinc-coated carbon steel sheetof structural quality

Sterility testing: sampling, criteria of compliance of abatch with sterility requirements

Sterility of liquids

Sterility of solid materials

Title

SANS 4778:1981/ISO 4778:1981, IDT, Ed. 1

SANS 4787:1984/ISO 4787:1984, IDT, Ed. 1

SANS 4788:1980/ISO 4788:1980, IDT, Ed. 1

SANS 4788:2009/ISO 4788:2005, IDT, Ed. 2

SANS 4800:1998/ISO 4800:1998, IDT, Ed. 2

SANS 4831:2007/ISO 4831:2006, IDT, Ed. 3

SANS 4832:2007/ISO 4832:2006, IDT, Ed. 3

SANS 4833:2007/ISO 4833:2003, IDT, Ed. 3

SANS 4866:1990/ISO 4866:1990, IDT, Ed. 1

SANS 4892-2:2008/ISO 4892-2:2006, IDT, Ed. 2

SANS 4918:1990/ISO/TR 4918:1990, IDT, Ed. 1

SANS 4919:1978/ISO 4919:1978, IDT, Ed. 1

SANS 4921:2000/ISO 4921:2000, IDT, Ed. 2

SANS 4928:2009/ISO 4928:2006, IDT, Ed. 3

SANS 4930:2009/ISO 4930:2006, IDT, Ed. 2

SANS 4998:2007/ISO 4998:2005, IDT, Ed. 4

SANS 5001:1971

SANS 5002:1987

SANS 5003:1987

SANS Number

(SABS ISO 4778)

(SABS ISO 4787)

(SABS ISO 4788)

(SABS ISO 4788)

(SABS ISO 4800)

(SABS ISO 4831)

(SABS ISO 4832)

(SABS ISO 4833)

(SABS ISO 4866)

(SABS ISO/TR 4918)

(SABS ISO 4919)

(SABS ISO 4921)

(SABS ISO 4998)

(SABS SM 1)

(SABS SM 2)

(SABS SM 3)


October 2009

3

4

4

3

5

3

3

2

3

3

3.01

4

3

1

3

3

2

3

1

1

1

Edition

Sterility of antibiotics and preparations containingantibiotics

Pyrogenicity of pharmaceutical products (derivedfrom BP 1988)

Extractable volume of a pharmaceutical product in acontainer

Limit of alkalinity of glass containers forpharmaceutical products

Water quality - Determination of pH

Sodium chloride and total chloride content ofsolutions

Heavy metals in pharmaceutical solutions, limit test

Arsenic in pharmaceutical products, limit test

Dextrose content of solutions

Visible suspended matter and sediment inpharmaceutical products

Paints and varnishes - Panels for testing: Fibre-cement panels

Paints and varnishes - Application by applicatorblade

Paints and varnishes - Spraying properties of paints

Industrial trucks - Inspection and repair of fork armsin service on fork-lift trucks

Potassium chloride content of solutions

Anticoagulant acid citrate dextrose solution,identification of

Citric acid content of pharmaceutical products

Fibre diameter of textile fibres - Projectionmicroscope method

Brown coals and lignites - Determination of truerelative density and apparent relative density

Hard coal - Determination of Hardgrove grindabilityindex

Textiles - Preparation of laboratory test samples andtest specimens for chemical testing

Title

SANS 5004:1987

SANS 5006:1992

SANS 5009:1987

SANS 5010:1975

SANS 5011:2005/ISO 10523:1994, IDT, Ed. 1

SANS 5012:1987

SANS 5014:1987

SANS 5016:1975

SANS 5018:1975

SANS 5019:1975

SANS 5030:2006

SANS 5037:2003

SANS 5044:2005

SANS 5057:2007/ISO 5057:1993, IDT, Ed. 1

SANS 5063:1975

SANS 5064:1975

SANS 5067:1975

SANS 5071:2007

SANS 5072:2005/ISO 5072:1997, IDT, Ed. 1

SANS 5074:1994/ISO 5074:1994, IDT, Ed. 2

SANS 5089:1977/ISO 5089:1977, IDT, Ed. 1

SANS Number

(SABS SM 4)

(SABS SM 6)

(SABS SM 9)

(SABS SM 10)

(SABS SM 12)

(SABS SM 14)

(SABS SM 16)

(SABS SM 18)

(SABS SM 19)

(SABS SM 30)

(SABS SM 37)

(SABS SM 44)

(SABS SM 63)

(SABS SM 64)

(SABS SM 67)

(SABS SM 71)

(SABS ISO 5074)

(SABS ISO 5089)


October 2009

4

3

3

3

3

4

5

4

2

3

3.01

3

3

3

3

3

3

4

1

4

Edition

Bow and skewness in woven textile fabrics

Water resistance of textile fabrics: Hydrostatic headtest

Water resistance - Water-repellency of fabricspermeable to air (Bundesmann test)

Water resistance of textile fabrics: drop penetrationtest

Water resistance of textile fabrics: short period conetest

Non-fibrous material content of wool

Non-fibrous material content of textiles (methodusing starch-digesting enzymes)

Fluidity of cotton and certain cellulosic man-madefibres in cuprammonium solution (modified method)

Textiles - Formulae used in statistical analysis

Paints and varnishes - Apparent water absorption ofpaint films

Paints and varnishes - Determination of viscosity bymeans of an efflux cup

Viscosity of binders for paints

Paints and varnishes - General appearance of oilsand clear varnishes

Paints and varnishes - Resistance to sheendevelopment of paint films

Paints and varnishes - Daylight 45°, 0° luminousdirectional reflectance of surface coatings andpigments

Paints and varnishes - Sanding properties of paintfilms

Paints and varnishes - Resistance to impact of paintfilms

Paints and varnishes - Determination of through-drystate and through-dry time

Non-ducted air conditioners and heat pumps -Testing and rating for performance

Paints and varnishes - Determination of viscosity bymeans of a Stormer viscometer

Title

SANS 5091:2007

SANS 5099:2005

SANS 5100:2005

SANS 5101:2004

SANS 5102:2004

SANS 5113:2005

SANS 5114:2006

SANS 5115:2005

SANS 5117:2005

SANS 5123:2005

SANS 5125:2007

SANS 5126:2008

SANS 5127:2006

SANS 5136:2005

SANS 5137:2005

SANS 5142:2005

SANS 5146:2005

SANS 5148:2003

SANS 5151:1994/ISO 5151:1994, IDT, Ed. 1

SANS 5153:2003

SANS Number

(SABS SM 91)

(SABS SM 99)

(SABS SM 100)

(SABS SM 101)

(SABS SM 102)

(SABS SM 113)

(SABS SM 114)

(SABS SM 115)

(SABS SM 117)

(SABS SM 123)

(SABS SM 125)

(SABS SM 126)

(SABS SM 127)

(SABS SM 136)

(SABS SM 137)

(SABS SM 142)

(SABS SM 146)

(SABS SM 148)

(SABS ISO 5151)

(SABS SM 153)


October 2009

2

3.01

3

4

2.01

2

1

2

2

1

2

2

2

2

2.01

1.01

3

3.01

3.01

3.01

Edition

Household refrigerating appliances - Frozen foodstorage cabinets and food freezers - Characteristicsand test methods

Paints and varnishes - Temperature stability

Paints and varnishes - Determination of resistanceto cold water

Paints and varnishes - Determination of washability(brush method)

Textile fabrics: tearing strength of selvedges

Stretched width of mutton cloth

Welding - Materials for resistance weldingelectrodes and ancillary equipment

Resistance welding equipment - Electrode adaptors,male taper 1:10 Part 1: Conical fixing, taper 1:10

Resistance spot welding - Electrode adaptors, maletaper 1:10 Part 2: Parallel shank fixing for end-thrustelectrodes

Straight resistance spot welding electrodes

Total alkali content of soap powders or chips

Alkaline salt content of scouring compounds

Fatty matter content of soap products

Unsaponified plus unsaponifiable matter content ofsoap products

Alcohol-insoluble matter content of soap products

Water insoluble matter content of soap products

Water - Turbidity

Water - Cadmium content

Water - Copper content

Water - Iron content

Title

SANS 5155:1995/ISO 5155:1995, IDT, Ed. 2

SANS 5160:2007

SANS 5167:2005

SANS 5175:2003

SANS 5176:2007

SANS 5178:2006

SANS 5182:1991/ISO 5182:1991, IDT, Ed. 2

SANS 5183-1:2008/ISO 5183-1:1998, IDT, Ed. 2

SANS 5183-2:2008/ISO 5183-2:2000, IDT, Ed. 2

SANS 5184:1979/ISO 5184:1979, IDT, Ed. 1

SANS 5185:2006

SANS 5186:2006

SANS 5187:2006

SANS 5188:2006

SANS 5189:2004

SANS 5190:2004

SANS 5197:2007

SANS 5201:2005

SANS 5203:2004

SANS 5207:2004

SANS Number

(SABS ISO 5155)

(SABS SM 160)

(SABS SM 167)

(SABS SM 175)

(SABS SM 176)

(SABS SM 178)

(SABS ISO 5182)

(SABS ISO 5183-1)

(SABS ISO 5183-2)

(SABS ISO 5184)

(SABS SM 185)

(SABS SM 186)

(SABS SM 187)

(SABS SM 188)

(SABS SM 189)

(SABS SM 190)

(SABS SM 197)

(SABS SM 201)

(SABS SM 203)

(SABS SM 207)


October 2009

3.01

3.01

2.02

2.02

3.01

3.02

2

2.01

4.03

1.01

2

2

2

2

2

2

2.01

4

3

2

2

Edition

Water - Lead content

Water - Manganese content

Water - Nitrate and nitrite content

Water - Dissolved solids content

Water - Zinc content

Water - Free and saline ammonia content

Water - Albuminoid ammonia content

Water - Oxygen absorption

Microbiological analysis of water - General testmethods

Identification of rosin in fatty matter

Rosin content of fatty matter in soaps

Chloride content of soap products (potentiometricmethod)

Carbolic acid content of carbolic soap

Volatile matter content of scouring compounds

Titre of fatty matter in soaps

Fineness of water-insoluble matter of scouringcompounds

Soap powder or soap chips - Determination offineness

Abrasive number of scouring compounds

Pesticides - Biological evaluation of the efficacy ofmists and fogs

Standard test method for the determination of thediastatic power of malts prepared from sorghumincluding bird-proof varieties, and from millet

Bacteriostatic efficacy of water miscible liquids

Title

SANS 5208:2004

SANS 5209:2005

SANS 5210:2006

SANS 5213:2005

SANS 5214:2005

SANS 5217:2007

SANS 5218:2007

SANS 5220:2005

SANS 5221:2007

SANS 5222:2004

SANS 5223:2006

SANS 5224:2006

SANS 5225:2006

SANS 5226:2006

SANS 5228:2006

SANS 5230:2006

SANS 5231:2005

SANS 5232:2006

SANS 5233:2007

SANS 5235:2008

SANS 5236:2009

SANS Number

(SABS SM 208)

(SABS SM 209)

(SABS SM 210)

(SABS SM 213)

(SABS SM 214)

(SABS SM 217)

(SABS SM 218)

(SABS SM 220)

(SABS SM 221)

(SABS SM 222)

(SABS SM 223)

(SABS SM 224)

(SABS SM 225)

(SABS SM 226)

(SABS SM 228)

(SABS SM 230)

(SABS SM 231)

(SABS SM 232)

(SABS SM 233)

(SABS SM 235)

(SABS SM 236)


October 2009

2

4

2

3

2

2

2

2

3

4

3

5

3

3.01

3

5

4

3.01

4

3

3

Edition

Chlorine retention of fabrics: reduction in breakingstrength method

Textiles - Nep count of cotton wool

Determination of the absorbency rate of absorbentcotton wool

Water-soluble matter content of textiles

Effect of heat on absorbent cotton wool

Determination of the presence of oxidizingsubstances in surgical dressings

Determination of the presence of alkalinity insurgical dressings

Determination of the presence of acidity in surgicaldressings

Presence of dyes in absorbent cotton wool

Ash content of textile surgical dressings

Buoyancy of fibre fillers for life jackets

Test for buoyancy of life-jackets

Textiles - Yarns from packages - Determination ofloop strength

Bactericidal efficacy of anti-bacterial liquid toiletsoap

Snarling twist in textile yarns

Water absorption rate of textile fabrics

Pile-to-ground length ratio of warp yarns in textilefabrics with uncut pile

Air permeability of textile fabrics

Water resistance of textile fabrics: Variable headtest

Threads per centimetre in narrow woven textilefabrics

Turns per metre of final folding twist and twistvariation of textile yarns

Title

SANS 5237:2005

SANS 5247:2007

SANS 5249:2006

SANS 5250:2006

SANS 5251:2006

SANS 5252:2006

SANS 5254:2003

SANS 5255:2003

SANS 5256:2005

SANS 5257:2005

SANS 5258:2004

SANS 5259:2005

SANS 5260:2004

SANS 5261:2009

SANS 5262:2006

SANS 5263:2005

SANS 5264:2006

SANS 5265:2007

SANS 5266:2005

SANS 5267:2005

SANS 5270:2004

SANS Number

(SABS SM 237)

(SABS SM 247)

(SABS SM 249)

(SABS SM 250)

(SABS SM 251)

(SABS SM 252)

(SABS SM 254)

(SABS SM 255)

(SABS SM 256)

(SABS SM 257)

(SABS SM 258)

(SABS SM 259)

(SABS SM 260)

(SABS SM 261)

(SABS SM 262)

(SABS SM 263)

(SABS SM 264)

(SABS SM 265)

(SABS SM 266)

(SABS SM 267)

(SABS SM 270)


October 2009

3

3

4

3

4

4

3

4

3

3

3

2

3

3

3

3

3

3.01

3

3

3

Edition

Non-fibrous material content of textiles -Hydrochloric acid method

Alkali-solubility of flax materials

Wales and courses per unit length in knitted textilefabrics (counting glass method)

Non-fibrous material content of textiles (physicalseparation method)

Resistance to attack by Chaetomium globosum

Sewing stitches per unit length

Pesticides - Rearing and handling of theMediterranean flour moth (Ephestia kuehniellaZeller)

Water repellency of textile fabrics (Spray test)

Splitting resistance of textile felts

Pesticides - Rearing and handling of the skin andhide beetle (Dermestes maculatus de Geer)

Length of textile shoe laces

Number of interlacing threads in a braid

Mass per 100 m of textile shoe laces

Plaits per centimetre in a textile braid

Colour-bleeding (in water) of textile shoe laces

Abrasion resistance of textile shoe laces (withoutcore) and similar articles

Feathers and down - Scouring test

Breaking strength of seams in textiles

Skein strength and tenacity, and linear density ofspun textile yarns on packages

Tear resistance of textile felts

Mass per unit length of conditioned textile fabrics

Title

SANS 5272:2007

SANS 5274:2006

SANS 5275:2004

SANS 5276:2005

SANS 5277:2009

SANS 5278:2005

SANS 5299:2008

SANS 5300:2005

SANS 5301:2005

SANS 5302:2009

SANS 5311:2006

SANS 5312:2005

SANS 5313:2005

SANS 5314:2005

SANS 5315:2004

SANS 5316:2005

SANS 5322:2005

SANS 5323:2008

SANS 5326:2007

SANS 5328:2005

SANS 5330:2005

SANS Number

(SABS SM 272)

(SABS SM 274)

(SABS SM 275)

(SABS SM 276)

(SABS SM 277)

(SABS SM 278)

(SABS SM 299)

(SABS SM 300)

(SABS SM 301)

(SABS SM 302)

(SABS SM 311)

(SABS SM 312)

(SABS SM 313)

(SABS SM 314)

(SABS SM 315)

(SABS SM 316)

(SABS SM 322)

(SABS SM 323)

(SABS SM 326)

(SABS SM 328)

(SABS SM 330)


October 2009

5

3

3

3

3

3

3

3

3.01

3

3

3

3

3.01

3.01

3

3

3

3.01

3

2

Edition

Pesticides - Rearing and handling of the commonhousefly (Musca domestica (L.))

Dimensions of hosiery

Dimensional changes of hosiery during relaxation

Mass per unit area of conditioned knitted textiles

Potassium in solutions, detection

Flex cracking of coated textile fabrics

Degree of blocking of coated textile fabrics

Water absorption of plastics filler foam for lifejackets

Tensile strength and extension at break: modified(dumb-bell) strip method

Accelerated aging of coated textile fabrics

Density of foamed plastic fillers for life jackets

Dimensional changes of textile fabrics during steampressing

Pesticides - Evaluation of rodentproofness ofbuilding materials and constructions

Gripping strength of tags on textile shoe laces

Slip resistance of textile shoe laces and similararticles

Pesticides - Biological evaluation of insecticidalsprays on compost (laboratory test)

Effect of heat on appearance and texture of textilefabrics

Dimensional changes of made-up textile articles

Colour fastness of buttons to washing

Colour fastness of buttons to dry cleaning

Method of obtaining test samples of cleaning waste

Title

SANS 5334:2008

SANS 5369:2005

SANS 5370:2005

SANS 5385:2005

SANS 5386:1987

SANS 5411:2005

SANS 5412:2005

SANS 5413:2006

SANS 5414:2007

SANS 5415:2005

SANS 5417:2005

SANS 5418:2005

SANS 5419:2009

SANS 5420:2007

SANS 5421:2007

SANS 5422:2007

SANS 5448:2006

SANS 5449:2005

SANS 5450:2007

SANS 5451:2004

SANS 5452:2005

SANS Number

(SABS SM 334)

(SABS SM 369)

(SABS SM 370)

(SABS SM 385)

(SABS SM 386)

(SABS SM 411)

(SABS SM 412)

(SABS SM 413)

(SABS SM 414)

(SABS SM 415)

(SABS SM 417)

(SABS SM 418)

(SABS SM 419)

(SABS SM 420)

(SABS SM 421)

(SABS SM 422)

(SABS SM 448)

(SABS SM 449)

(SABS SM 450)

(SABS SM 451)

(SABS SM 452)


October 2009

3

4

4

4

4

4

4

2

2.01

2

2

3

3

2

3

4.01

3

3.01

2.01

3

3

Edition

Pesticides: Rearing and handling of the Americancockroach (Periplaneta Americana (L.))

Pesticides - Rearing and handling of the Germancockroach (Blatella germanica (L.))

Pesticides - Rearing and handling of the confusedflour beetle (Tribolium confusum (Duv.))

Pesticides - Rearing and handling of the granaryweevil (Sitophilus granarius (L.))

Pesticides - Rearing and handling of the rice weevil(Sitophilus oryzae (L.))

Pesticides - Rearing and handling of the yellow fevermosquito (Aedes aegypti (L.))

Paints and varnishes - Wet hiding power (brush-outmethod)

Soil burial

Pesticides - Biological evaluation of the resistance ofmaterials to termite attack

Resistance to fungal attack by Aspergillus niger

Non-fibrous material content of textiles (petroleumether and water extraction method)

Resistance to fungal attack by mixed fungi

Seam slippage

Width of ribbons and other narrow fabrics

Runnage of twines

Ball burst strength of textile fabrics

Burning test on cable dielectric and outer coverings

Tear resistance of rubber cable sheathing

Bactericidal efficacy of disinfectants: Kelsey Sykestest (modified)

Oil resistance of vehicle ignition cables

Dripping test on braided and impregnated heat-resistant cables

Title

SANS 5457:1977

SANS 5458:2008

SANS 5459:2008

SANS 5460:2008

SANS 5461:2008

SANS 5462:2008

SANS 5464:2005

SANS 5469:2009

SANS 5471:2006

SANS 5472:2009

SANS 5483:2006/ISO 1833:1977, MOD

SANS 5484:2009

SANS 5486:2007

SANS 5488:2005

SANS 5492:2007

SANS 5493:2008

SANS 5502:2009

SANS 5506:2008

SANS 5509:2009

SANS 5511:2008

SANS 5513:2007

SANS Number

(SABS SM 457)

(SABS SM 458)

(SABS SM 459)

(SABS SM 460)

(SABS SM 461)

(SABS SM 462)

(SABS SM 464)

(SABS SM 469)

(SABS SM 471)

(SABS SM 472)

(SABS SM 483)

(SABS SM 484)

(SABS SM 486)

(SABS SM 488)

(SABS SM 492)

(SABS SM 493)

(SABS SM 502)

(SABS SM 506)

(SABS SM 509)

(SABS SM 511)

(SABS SM 513)


October 2009

3

3

4

3

3

1

3

3

2

2

3

3

1

3

3

3

3

3

2

2

Edition

Flexibility of braided and impregnated heat-resistantcables

Flexing test on flexible cords

Kink resistance of circular flexible cords

Dielectric resistance of electric cables

Power frequency electrical puncture test on ignitioncables

Dried milk - Determination of moisture content(Reference method)

Dimensions of aluminium and copper strip, sheet,rod, bar, tube, channel and angle

Sterility of syringes and needles

Potency of antibiotics - Microbiological agar diffusionmethod of assay (two-point technique)

Media and reagents for microbiological tests

Bending tests (longitudinal, transverse andedgewise) on copper strip or sheet

Pigment volume concentration of paints with a non-aqueous solvent base

Determination of selenium in copper

Pesticides - Insecticidal oil-based space sprays inlow-pressurized dispensers: Determination ofinternal pressure of filled dispensers

Pesticides: Insecticidal oil-based space sprays inlow-pressurized dispensers: Determination ofdelivery rate

Pesticides - Insecticidal oil-based space sprays inlow-pressurized dispensers - Determination of thecombustibility (closed drum test)

Pesticides - Insecticidal oil-based space sprays inlow-pressurized dispensers - Determination of non-volatile content

Pesticides - Insecticidal oil-based space sprays inlow-pressurized dispensers - Determination ofcrazing effect on organic glass (polyacrylate sheet)

Pesticides: insecticidal oil-based space sprays inlow-pressurized dispensers: determination ofstaining effect on painted surfaces

Pesticides: Insecticidal oil-based space sprays inlow-pressurized dispensers: determination ofstaining effect on multifibre test fabric

Title

SANS 5514:2007

SANS 5515:2007

SANS 5516:2007

SANS 5526:2007

SANS 5529:2007

SANS 5537:2005/ISO 5537:2004, IDT, Ed. 1

SANS 5544:2008

SANS 5548:1987

SANS 5550:1993

SANS 5553:2008

SANS 5557:2009

SANS 5560:2005

SANS 5566:1968

SANS 5568:2003

SANS 5569:2003

SANS 5570:2007

SANS 5571:2007

SANS 5572:2007

SANS 5573:1970

SANS 5574:1970

SANS Number

(SABS SM 514)

(SABS SM 515)

(SABS SM 516)

(SABS SM 526)

(SABS SM 529)

(SABS SM 544)

(SABS SM 548)

(SABS SM 550)

(SABS SM 553)

(SABS SM 557)

(SABS SM 560)

(SABS SM 566)

(SABS SM 568)

(SABS SM 569)

(SABS SM 570)

(SABS SM 571)

(SABS SM 572)

(SABS SM 573)

(SABS SM 574)


October 2009

2

4

3

1

2.01

1

2

3

3

1

3

2

3

3

2

3

2

2

3

2

2

Edition

Pesticides - Testing of valves of filled insecticidallow-pressurized dispensers for clogging

Pesticides - Biological evaluation of the efficacy ofinsecticidal water-based and oil-based space spraysin low pressurized dispensers

Pesticides - Biological evaluation of the contactefficacy of liquid residual insecticides

Field trials of agricultural crops for pesticide residueanalysis

Pesticides: Sieving of wettable powders

Preparation of samples and extracts used in testingplastics for medical use

Water-soluble size content of woven textile fabrics

Creepage (of woven textile fabrics)

Resistance to growth of Trichophyton interdigitale

Method for the sampling of leather and otherfootwear materials

Preparation of samples (leather, elastomericmaterial and other footwear materials)

Determination of water content in leather

Leather - Matter extractable by petroleum ether

Determination of water-soluble matter content inleather

Determination of sulphated ash content of water-solubles in leather

Determination of total ash content of leather

Determination of hide substance of leather

Leather - Determination of chromic oxide content

Leather and footwear components - pH value anddifference figure of an aqueous extract

Determination of magnesium sulphate content ofleather by complexometric titration

Determination of perspiration resistance of liningleather

Title

SANS 5575:2007

SANS 5576:2003

SANS 5583:2004

SANS 5584:1970

SANS 5585:2003

SANS 5591:1975

SANS 5602:2006

SANS 5607:2005

SANS 5614:2009

SANS 5615:1968

SANS 5616:2001

SANS 5617:2001

SANS 5618:2001

SANS 5619:2001

SANS 5620:1972

SANS 5621:2009

SANS 5624:1972

SANS 5625:1990

SANS 5626:1992

SANS 5627:1972

SANS 5628:1972

SANS Number

(SABS SM 575)

(SABS SM 576)

(SABS SM 583)

(SABS SM 584)

(SABS SM 585)

(SABS SM 591)

(SABS SM 602)

(SABS SM 607)

(SABS SM 614)

(SABS SM 615)

(SABS SM 616)

(SABS SM 617)

(SABS SM 618)

(SABS SM 619)

(SABS SM 620)

(SABS SM 621)

(SABS SM 624)

(SABS SM 625)

(SABS SM 626)

(SABS SM 627)

(SABS SM 628)


October 2009

3

1

1

1

2

3

2

3

1

2

1

2

2

3

3

2

3

2

2

2

Edition

Leather and fibreboard - Determination of apparentdensity

Determination of resistance to grain cracking ofleather

Determination of dynamic waterproofness of soleleather

Determination of wet stitch tear strength (leather,leatherboard, fibreboard)

Determination of wet compressibility of leather andfibreboards

Shrinkage temperature of leather

Determination of (a) tensile strength, (b) percentageelongation caused by a specified force, (c)percentage elongation at break of leather

Determination of tearing strength

Determination of dynamic waterproofness of upperleather

Determination of two-dimensional extension ofleather

Determination of flex resistance (leather fibreboardand cellulose fibreboard inner soles)

Determination of wet and dry bursting strengths ofstiffeners

Determination of water absorption of inner soles andinner-sole material

Accumulated impact strength of toe-puff materialsand the degree of softening of toe-puffs

Safety footwear - Impact resistance

Determination of bond strength of rib attachment(stuck-on rib inner soles)

Leather, footwear upper and lining materials - Flexendurance

Identification of organic retanned matter in chromeretanned leather

Determination of density of elastomeric material

Determination of hardness of elastomeric material

Title

SANS 5629:1993

SANS 5630:1968

SANS 5632:1968

SANS 5633:1968

SANS 5634:1972

SANS 5635:1990

SANS 5636:1972

SANS 5637:2000

SANS 5638:1968

SANS 5639:1972

SANS 5640:1968

SANS 5641:1972

SANS 5642:1972

SANS 5644:1988

SANS 5645:1994

SANS 5646:1972

SANS 5647:1993

SANS 5648:1972

SANS 5649:1972

SANS 5650:1972

SANS Number

(SABS SM 629)

(SABS SM 630)

(SABS SM 632)

(SABS SM 633)

(SABS SM 634)

(SABS SM 635)

(SABS SM 636)

(SABS SM 637)

(SABS SM 638)

(SABS SM 639)

(SABS SM 640)

(SABS SM 641)

(SABS SM 642)

(SABS SM 644)

(SABS SM 645)

(SABS SM 646)

(SABS SM 647)

(SABS SM 648)

(SABS SM 649)

(SABS SM 650)


October 2009

2

2

2

2

2

2

1

1

1

1

2

2

2

2

1

2

1

2

2

1

Edition

Tensile strength, elongation at break, and tensilestress at specified elongation of elastomeric material(footwear)

Determination of split tear strength of elastomericmaterial

Determination of heat shrinkage of elastomericmaterial

Determination of compression set of elastomericmaterial

Determination of flammability of elastomeric material

Determination of swelling of elastomeric material inswelling liquids

Determination of adhesion of outer soles to uppermaterial (stuck-on)

Determination of adhesion of upper leather to directmoulded rubber soling material

Determination of peeling load (outer soles to canvasuppers) on canvas shoes

Determination of adhesion between foxing andcanvas uppers in canvas shoes

Footwear materials - Abrasion resistance ofelastomeric material

Resistance to creep of adhesive bonds

Footwear - Soling material - Cut growth resistance

Water quality - Sampling Part 1: Guidance on thedesign of sampling programmes and samplingtechniques

Water quality - Sampling Part 2: Guidance onsampling techniques

Water quality - Sampling Part 3: Guidance on thepreservation and handling of water samples

Water quality - Sampling Part 4: Guidance onsampling from lakes, natural and man-made

Water quality - Sampling Part 5: Guidance onsampling of drinking water from treatment works andpiped distribution systems

Water quality - Sampling Part 6: Guidance onsampling of rivers and streams

Water quality - Sampling Part 10: Guidance onsampling of waste waters

Title

SANS 5651:1989

SANS 5652:1972

SANS 5653:1972

SANS 5654:1972

SANS 5655:1972

SANS 5656:1972

SANS 5660:1968

SANS 5661:1968

SANS 5662:1973

SANS 5663:1973

SANS 5664:1994

SANS 5665:2005

SANS 5666:1994

SANS 5667-1:2008/ISO 5667-1:2006, IDT, Ed. 2

SANS 5667-2:1991/ISO 5667-2:1991, IDT, Ed. 2

SANS 5667-3:2006/ISO 5667-3:2003, IDT, Ed. 3

SANS 5667-4:1987/ISO 5667-4:1987, IDT, Ed. 1

SANS 5667-5:2006/ISO 5667-5:2006, IDT, Ed. 2

SANS 5667-6:2006/ISO 5667-6:2005, IDT, Ed. 2

SANS 5667-10:2007/ISO 5667-10:1992, IDT, Ed. 1

SANS Number

(SABS SM 651)

(SABS SM 652)

(SABS SM 653)

(SABS SM 654)

(SABS SM 655)

(SABS SM 656)

(SABS SM 660)

(SABS SM 661)

(SABS SM 662)

(SABS SM 663)

(SABS SM 664)

(SABS SM 665)

(SABS SM 666)

(SABS ISO 5667-1)

(SABS ISO 5667-2)

(SABS ISO 5667-3)

(SABS ISO 5667-4)

(SABS ISO 5667-5)

(SABS ISO 5667-6)


October 2009

1

1

1

1

1

1

1

2

2.01

2.01

2

2

3

3

3

3

2

2

1

1

Edition

Water quality - Sampling Part 11: Guidance onsampling of groundwaters

Water quality - Sampling Part 13: Guidance onsampling of sludges from sewage and watertreatment works

Water quality - Sampling Part 14: Guidance onquality assurance of environmental water samplingand handling

Water quality - Sampling Part 15: Guidance onpreservation and handling of sludge and sedimentsamples

Water quality - Sampling Part 18: Guidance onsampling of groundwater at contaminated sites

Measurement of set in lasting of leather with thedome plasticity apparatus

Measurement of distension and strength of grain ofleather by the ball burst test

Leather and footwear materials - Water vapourpermeability

Efficacy of algaecides

Determination of shade depth class

Pesticides - Aromatic plus heterocyclic fractioncontent and naphthenic plus paraffinic fractioncontent of insecticidal petroleum base oils

Pesticides - Oil content and emulsifier content ofemulsifiable concentrates of insecticidal petroleumoils

Pesticides - Biological evaluation of knock-down andkilling properties of liquid and aerosol formulations

Pesticides - Biological evaluation of the properties ofsolid fly baits

Pesticides - Biological evaluation of the efficacy ofinsecticide dusting powders

Pesticides - Biological testing of the efficacy ofrodenticides

Pesticides: Biological evaluation of the efficacy ofmosquito repellants

Pesticides: Biological evaluation of the efficacy ofresidual sprays against skin and hide beetles

Accuracy (trueness and precision) of measurementmethods and results Part 1: General principles anddefinitions

Accuracy (trueness and precision) of measurementmethods and results Part 2: Basic method for thedetermination of repeatability and reproducibility of astandard measurement method

Title

SANS 5667-11:1993/ISO 5667-11:1993, IDT

SANS 5667-13:2007/ISO 5667-13:1997, IDT, Ed. 1

SANS 5667-14:2007/ISO 5667-14:1998, IDT, Ed. 1

SANS 5667-15:1999/ISO 5667-15:1999, IDT, Ed. 1

SANS 5667-18:2007/ISO 5667-18:2001, IDT, Ed. 1

SANS 5668:1973

SANS 5669:1973

SANS 5670:1994

SANS 5682:2006

SANS 5683:2006

SANS 5686:2007

SANS 5687:2007

SANS 5689:2002

SANS 5690:2003

SANS 5693:2007

SANS 5694:2007

SANS 5695:1978

SANS 5696:1978

SANS 5725-1:2009/ISO 5725-1:1994, IDT, Ed. 1

SANS 5725-2:2009/ISO 5725-2:1994, IDT, Ed. 1

SANS Number

(SABS ISO 5667-11)

(SABS ISO 5667-15)

(SABS SM 668)

(SABS SM 669)

(SABS SM 670)

(SABS SM 682)

(SABS SM 683)

(SABS SM 686)

(SABS SM 687)

(SABS SM 689)

(SABS SM 690)

(SABS SM 693)

(SABS SM 694)

(SABS SM 695)

(SABS SM 696)


October 2009

1

1

1

1

3

2

1

2

2

2

2

2

1

2

2

2

2

Edition

Accuracy (trueness and precision) of measurementmethods and results Part 3: Intermediate measuresof the precision of a standard measurement method

Accuracy (trueness and precision) of measurementmethods and results Part 4: Basic methods for thedetermination of the trueness of a standardmeasurement method

Accuracy (trueness and precision) of measurementmethods and results Part 5: Alternative methods forthe determination of the precision of a standardmeasurement method

Accuracy (trueness and precision) of measurementmethods and results Part 6: Use in practice ofaccuracy values

Seaming properties of woven textile fabrics

Antibacterial efficacy of solid and semi-solidantiseptics

Tin content of tin and lead alloys

Specific surface of cement

Autoclave expansion of cement

Examination for the presence of viable spores ofmesophilic Clostridium organisms in foods

Examination for the presence of viable Bacillusanthracis in foods

Efficacy of cleaning plant, equipment and utensils:swab technique

Milk - Determination of freezing point - Thermistorcryoscope method (Reference method)

Measurement of girth and length extendeddimensions of pantyhose

Preparation of steel substrates before theapplication of paints and related products - Test forthe assessment of cleanliness of blast-cleaned steelsurfaces - Photo-electric reflectance measurement

Preparation of steel substrates before theapplication of paints and related products - Test forthe assessment of cleanliness of blast-cleaned steelsurfaces - Freedom from certain soluble salts

Preparation of steel substrates before theapplication of paints and related products - Test forthe assessment of cleanliness of blast-cleaned steelsurfaces - Detection of residual millscale

Title

SANS 5725-3:2009/ISO 5725-3:1994, IDT, Ed. 1

SANS 5725-4:2009/ISO 5725-4:1994, IDT, Ed. 1

SANS 5725-5:2009/ISO 5725-5:1998, IDT, Ed. 1

SANS 5725-6:2009/ISO 5725-6:1994, IDT, Ed. 1

SANS 5726:2007

SANS 5730:2009

SANS 5732:1971

SANS 5748:2006

SANS 5754:2007

SANS 5761:2008

SANS 5762:2008

SANS 5763:2006

SANS 5764:2005/ISO 5764 IDF 108:2002, IDT, Ed. 2

SANS 5766:2005

SANS 5768:2004

SANS 5770:2004

SANS 5771:2005

SANS Number

(SABS SM 726)

(SABS SM 730)

(SABS SM 732)

(SABS SM 748)

(SABS SM 754)

(SABS SM 761)

(SABS SM 762)

(SABS SM 763)

(SABS SM 766)

(SABS SM 768)

(SABS SM 770)

(SABS SM 771)


October 2009

2

2

3.01

3.01

3

3

2

2

2

2

2

2

2

2

3

3

1

1.01

2

Edition

Preparation of steel substrates before theapplication of paints and related products - Surfaceroughness characteristics of blast-cleaned steelsurfaces - Profile of blast-cleaned surfacesdetermined by a micrometer profile gauge

Preparation of steel substrates before theapplication of paints and related products - Surfaceroughness characteristics of blast-cleaned steelsurfaces - Profile of blast-cleaned surfacesdetermined by metallographic section

Redeposition index of laundry detergents

Fluorescent whitening agent content of laundrydetergents

Chemical damage to cotton fibres by laundrydetergents

Water-insoluble matter content of laundrydetergents

Diameter of circular crockery

Capacity of cups

Impact strength of cups, saucers, and plates

Resistance of saucers and plates to chipping

Resistance of crockery to crazing

Resistance of crockery to thermal shock

Water absorption of crockery

Resistance of crockery decoration to detergents andalkalis

Metal release from glazed crockery (plain ordecorated), and acid resistance of decoration

Foam height of laundry detergents

Pesticides: Test rooms, test conditions, testequipment, and test insects and their handling

Pesticides: General conditions and equipment forthe rearing and handling of test insects

Pesticides - Rearing and handling of the tobaccobeetle (Lasioderma serricorne Fabr.)

Title

SANS 5772:2004

SANS 5775:2004

SANS 5778:2008

SANS 5779:2008

SANS 5780:2008

SANS 5781:2006

SANS 5788:2008

SANS 5789:2008

SANS 5790:2008

SANS 5791:2008

SANS 5792:2008

SANS 5793:2008

SANS 5794:2008

SANS 5796:2008

SANS 5797:2008

SANS 5806:2006

SANS 5807:1979

SANS 5808:2003

SANS 5809:2008

SANS Number

(SABS SM 772)

(SABS SM 775)

(SABS SM 778)

(SABS SM 779)

(SABS SM 780)

(SABS SM 781)

(SABS SM 788)

(SABS SM 789)

(SABS SM 790)

(SABS SM 791)

(SABS SM 792)

(SABS SM 793)

(SABS SM 794)

(SABS SM 796)

(SABS SM 797)

(SABS SM 806)

(SABS SM 807)

(SABS SM 808)

(SABS SM 809)


October 2009

2

2

2

2.01

2

1

1

1

2

1

2

1

1

2

2

2.01

2.01

2.01

2.02

2.02

Edition

Pesticides - Rearing and handling of the lesser grainborer (Rhizopertha dominica F.)

Pesticides - Rearing and handling of the Pharaoh'sant (Monomorium pharaonis (L.))

Pesticides - Rearing and handling of the silver fish(Lepisma saccharina L.)

Timber-based board products - Squareness

Pesticides - Rearing and handling of the dried-fruitmoth (Ephestia cautella Walker)

Resistance spot welding electrode caps

Spot welding equipment - Taper plug gauges andtaper ring gauges

Pesticides: Biological evaluation of the efficacy ofinsecticides used on compost

Resistance welding equipment - Transformers -General specifications applicable to all transformers

Spot welding - Electrode back-ups and clamps

Resistance welding equipment - Secondaryconnecting cables with terminals connected towater-cooled lugs - Dimensions and characteristics

Resistance spot welding - Electrode adaptors,female taper 1:10

Resistance spot welding - Male electrode caps

Presence of chlorides in aggregates

Organic impurities in fine aggregates (limit test)

Detection of sugar in fine aggregates

Soluble deleterious impurities in fine aggregates(limit test)

Estimation of the effect of fine aggregate on thewater requirement of concrete

Effect of fine and coarse aggregate on the shrinkageand expansion of cement: aggregate mixes (mortarprism method)

Low density materials content of aggregates

Title

SANS 5811:2009

SANS 5812:2008

SANS 5815:2009

SANS 5817:2004

SANS 5819:2009

SANS 5821:1979/ISO 5821:1979, IDT, Ed. 1

SANS 5822:1988/ISO 5822:1988, IDT, Ed. 2

SANS 5823:1978

SANS 5826:2004/ISO 5826:1999, IDT, Ed. 2

SANS 5827:1983/ISO 5827:1983, IDT, Ed. 1

SANS 5828:2004/ISO 5828:2001, IDT, Ed. 2

SANS 5829:1984/ISO 5829:1984, IDT, Ed. 1

SANS 5830:1984/ISO 5830:1984, IDT, Ed. 1

SANS 5831:2006

SANS 5832:2006

SANS 5833:2006

SANS 5834:2006

SANS 5835:2006

SANS 5836:2007

SANS 5837:2008

SANS Number

(SABS SM 811)

(SABS SM 812)

(SABS SM 815)

(SABS SM 817)

(SABS SM 819)

(SABS ISO 5821)

(SABS ISO 5822)

(SABS SM 823)

(SABS ISO 5826)

(SABS ISO 5827)

(SABS ISO 5828)

(SABS ISO 5829)

(SABS ISO 5830)

(SABS SM 831)

(SABS SM 832)

(SABS SM 833)

(SABS SM 834)

(SABS SM 835)

(SABS SM 836)

(SABS SM 837)


October 2009

2

2.02

2.02

2.01

2.01

2.02

2.01

2.01

2

2.02

2.02

2.02

2

1.03

1.01

2

2

2

2

2

2

Edition

Sand equivalent value of fine aggregates

Soundness of aggregates (magnesium sulfatemethod)

Shell content of fine aggregate

Aggregate crushing value of coarse aggregates

FACT value (10% fines aggregate crushing value) ofcoarse aggregates

Water absorption of aggregates

Particle and relative densities of aggregates

Bulk densities and voids content of aggregates

Abrasion resistance of coarse aggregates (LosAngeles machine method)

Flakiness index of coarse aggregates

Polished-stone value of aggregates

Total water-soluble salts content of fines inaggregates

Sulfates content of fines in aggregates Part 1:Water-soluble sulfates in fines in aggregates

Sulfates content of fines in aggregates Part 2: Acid-soluble sulfates in fines in aggregates

Liquid limit of fines in aggregates for base-courses

Plastic limit and plasticity index of fines inaggregates for base-courses

Linear shrinkage of fines in aggregates for base-courses

pH Value of fines in aggregates for base-courses

Free water content of aggregates

Bulking of fine aggregates

Pesticides - Biological evaluation of mosquitolarvicides in artificially created mosquito breedingplaces

Title

SANS 5838:2006

SANS 5839:2008

SANS 5840:2008

SANS 5841:2008

SANS 5842:2006

SANS 5843:2008

SANS 5844:2006

SANS 5845:2006

SANS 5846:2006

SANS 5847:2008

SANS 5848:2008

SANS 5849:2008

SANS 5850-1:1998

SANS 5850-2:2008

SANS 5851:2002

SANS 5852:2008

SANS 5853:2008

SANS 5854:2006

SANS 5855:2008

SANS 5856:2006

SANS 5858:2007

SANS Number

(SABS SM 838)

(SABS SM 839)

(SABS SM 840)

(SABS SM 841)

(SABS SM 842)

(SABS SM 843)

(SABS SM 844)

(SABS SM 845)

(SABS SM 846)

(SABS SM 847)

(SABS SM 848)

(SABS SM 849)

(SABS SM 850-1)

(SABS SM 850-2)

(SABS SM 851)

(SABS SM 852)

(SABS SM 853)

(SABS SM 854)

(SABS SM 855)

(SABS SM 856)

(SABS SM 858)


October 2009

3

1.01

2.01

2.01

2.01

2.01

2.01

2.01

2.01

2.01

2.01

2

2

2

2

2

2

2

2

2

2

Edition

Pesticides - Biological efficacy of soil insecticides

Concrete tests - Dimensions, tolerances and uses ofcast test specimens

Concrete tests - Mixing fresh concrete in thelaboratory

Concrete tests - Sampling of freshly mixed concrete

Concrete tests - Making and curing of testspecimens

Concrete tests - Consistence of freshly mixedconcrete - Slump test

Concrete tests - Consistence of freshly mixedconcrete - Flow test

Concrete tests - Consistence of freshly mixedconcrete - Vebe test

Concrete tests - Consistence of freshly mixedconcrete - Compacting factor and compaction index

Concrete tests - Compressive strength of hardenedconcrete

Concrete tests - Flexural strength of hardenedconcrete

Concrete tests - The drilling, preparation, and testingfor compressive strength of cores taken fromhardened concrete

Preparation of samples of vulcanized rubbers fortesting

Conditioning of vulcanized rubbers

Accelerated aging of vulcanized rubbers (Air-ovenmethod)

Hardness of vulcanized rubbers of hardness 30-95IRH degrees

Compression set of vulcanized rubbers underconstant deflection

Tear strength of vulcanized rubbers

Water absorption of vulcanized rubbers

Ozone resistance of vulcanized rubbers (RAPRA-Hampden method)

Electrical resistance of vulcanized rubbers

Title

SANS 5859:2003

SANS 5860:2006

SANS 5861-1:2006

SANS 5861-2:2006

SANS 5861-3:2006

SANS 5862-1:2006

SANS 5862-2:2006

SANS 5862-3:2006

SANS 5862-4:2006

SANS 5863:2006

SANS 5864:2006

SANS 5865:1994

SANS 5867:2008

SANS 5868:2008

SANS 5869:2008

SANS 5870:2008

SANS 5872:2008

SANS 5873:2008

SANS 5875:2008

SANS 5876:2008

SANS 5880:2008

SANS Number

(SABS SM 859)

(SABS SM 860)

(SABS SM 861-1)

(SABS SM 861-2)

(SABS SM 861-3)

(SABS SM 862-1)

(SABS SM 862-2)

(SABS SM 862-3)

(SABS SM 862-4)

(SABS SM 863)

(SABS SM 864)

(SABS SM 865)

(SABS SM 867)

(SABS SM 868)

(SABS SM 869)

(SABS SM 870)

(SABS SM 872)

(SABS SM 873)

(SABS SM 875)

(SABS SM 876)

(SABS SM 880)


October 2009

2

1

1

1

2

2

1

1

1

2

2

2

1

1

3

1

1

1

1

2

Edition

Resistance of vulcanized rubbers to swelling(volumetric method)

Scuff damage by impact on leather

Assessment of scuff damage to leather (viewing boxmethod)

Degree of haemolysis in buffered systems

Pesticides - Biological evaluation of materialscontaining insecticide(s) having a fumigant action

Pesticides - Flammability of aerosols (flameprojection test)

Rubber and plastics test equipment - Tensile,flexural and compression types (constant rate oftraverse) - Specification

Pyrometric cone equivalent (refractoriness) ofrefractory bricks and materials

Creep of refractory bricks in compression

Moisture content of coal samples intended forgeneral analysis (vacuum-oven method)

Moisture content of coal samples intended forgeneral analysis (air-oven method)

Carbon dioxide content of coal (titrimetric method)

Cheese and processed cheese products -Determination of chloride content - Potentiometrictitration method

Tool steels and bearing steels - Micrographicmethod for assessing the distribution of carbidesusing reference photomicrographs

Acid gas evolved during combustion of cablematerials

Pesticides: Organoleptic evaluation of the taste ofpesticide-treated grain

Determination of wet split tear strength of inner soleand runner materials (other than leather)

Documentation - Methods for examining documents,determining their subjects, and selecting indexingterms

Documentation - Guidelines for the establishmentand development of multilingual thesauri

Non-fibrous material content of textiles (alkalihydrolysis method)

Title

SANS 5883:2008

SANS 5884:1977

SANS 5885:1977

SANS 5886:1979

SANS 5889:2007

SANS 5891:2003

SANS 5893:2003/ISO 5893:2002, IDT, Ed. 3

SANS 5908:1979

SANS 5910:1979

SANS 5924:2009

SANS 5925:2007

SANS 5941:2009

SANS 5943:2005/ISO 5943:2004, IDT, Ed. 3

SANS 5949:2005/ISO 5949:1983, IDT, Ed. 1

SANS 5956:2007

SANS 5957:1978

SANS 5962:1982

SANS 5963:2006/ISO 5963:1985, IDT, Ed. 1

SANS 5964:2005/ISO 5964:1985, IDT, Ed. 1

SANS 5965:2006

SANS Number

(SABS SM 883)

(SABS SM 884)

(SABS SM 885)

(SABS SM 886)

(SABS SM 889)

(SABS SM 891)

(SABS SM 908)

(SABS SM 910)

(SABS SM 924)

(SABS SM 925)

(SABS SM 941)

(SABS SM 956)

(SABS SM 957)

(SABS SM 962)

(SABS SM 965)


October 2009

3.01

2.01

1.01

1.01

1.01

2

2

2

2

3

2

3

2.01

1.01

1.01

2.01

1.01

1.01

1.01

1.01

1.01

Edition

Removable non-fibrous material content of textiles(scouring method)

Retention of preservative in timber (volume method)

Flatness of wooden board products

Edge straightness of wooden board products

Average adhesive bond quality of plywood andcomposite boards (knife test)

Heat-cool stability of wax polishes

Penetration of wax (paste) polishes

Performance of wax polishes

Softening point of the non-volatile matter of waxpolishes

Wax polishes - Non-volatile matter content and theash content of non-volatile matter

Water content of solvent-based wax polishes

Preparation of test specimens for moisture contentdetermination in timber and timber products

Moisture content of timber and timber products(oven dry method)

Moisture content of timber (extraction method)

Moisture content of timber (electric moisture-metermethod)

Depth of penetration of preservative and detectionand depth of sapwood in timber

Retention of preservative in timber (sample method)

Retention of preservative in timber (weighbridgemethod)

Water repellency (short-term) of preservative-treatedtimber

Guidelines for the spray-testing of timber specimens

Copper detection in timber

Title

SANS 5966:2007

SANS 5967:2008

SANS 5969:2004

SANS 5970:2004

SANS 5973:2009

SANS 5976:2005

SANS 5977:2008

SANS 5978:2008

SANS 5980:2007

SANS 5981:2008

SANS 5982:2006

SANS 5983:2008

SANS 5984:2004

SANS 5985:2004

SANS 5986:2004

SANS 5987:2007

SANS 5988:2004

SANS 5989:2004

SANS 5990:2004

SANS 5991:2004

SANS 5992:2004

SANS Number

(SABS SM 966)

(SABS SM 967)

(SABS SM 969)

(SABS SM 970)

(SABS SM 973)

(SABS SM 976)

(SABS SM 977)

(SABS SM 978)

(SABS SM 980)

(SABS SM 981)

(SABS SM 982)

(SABS SM 983)

(SABS SM 984)

(SABS SM 985)

(SABS SM 986)

(SABS SM 987)

(SABS SM 988)

(SABS SM 989)

(SABS SM 990)

(SABS SM 991)

(SABS SM 992)


October 2009

1.01

1.01

1.01

1.01

1.01

1.01

2

2

2

2

2

3

3

1.02

1.01

1.01

1.01

1.01

1.01

1.01

1

Edition

Chromium detection in timber

Arsenic detection in timber

Tin detection in timber

Zinc detection in timber

Heartwood detection in timber of the Pinus species

Heartwood detection in timber of the Eucalyptusspecies

Colour fastness of textile curtaining to water-wicking

Colour fastness of textile floor coverings toshampooing

Mass of total pile yarn per unit area of tufted textilefloor coverings

Mass per unit area of effective pile above thesubstrate of textile floor coverings

Balance of twist of textile threads

Assessment of the tendency of apparel fabrics tosnag (mace tester method)

Abrasion resistance of textile fabrics (Martindaletest)

Cutting and marking of test specimens of particleboards

Thickness swelling and water absorption offibreboards on immersion in water

Dimensional and mass stability of particle boardswith varying humidity

Modulus of elasticity and modulus of rupture in staticbending of fibreboards

Transverse tensile (internal bond) strength of wood-based panels

Screw-holding strength of wood-based panels

Surface bond strength of particle boards

Vinyl chloride monomer content of polyvinyl chlorideplastics for medical use

Title

SANS 5993:2004

SANS 5994:2004

SANS 5996:2004

SANS 5997:2004

SANS 5999:2004

SANS 6000:2004

SANS 6001:2004

SANS 6002:2004

SANS 6004:2005

SANS 6005:2005

SANS 6007:2006

SANS 6008:2005

SANS 6009:2005

SANS 6011:2009

SANS 6012:2004

SANS 6013:2004

SANS 6015:2004

SANS 6016:2005

SANS 6018:2005

SANS 6019:2004

SANS 6025:1984

SANS Number

(SABS SM 993)

(SABS SM 994)

(SABS SM 996)

(SABS SM 997)

(SABS SM 999)

(SABS SM 1000)

(SABS SM 1001)

(SABS SM 1002)

(SABS SM 1004)

(SABS SM 1005)

(SABS SM 1007)

(SABS SM 1008)

(SABS SM 1009)

(SABS SM 1011)

(SABS SM 1012)

(SABS SM 1013)

(SABS SM 1015)

(SABS SM 1016)

(SABS SM 1018)

(SABS SM 1019)

(SABS SM 1025)


October 2009

2

2

2

2

1.01

1.01

1.01

2

1.01

1.01

1.01

1.01

1.01

1.01

1.01

2.01

1.01

2

2

2

1.01

Edition

Dry-cleaning pretreatment of textile fabrics

Calibration of the BCIRA X-type viscometer

Fluidity of cotton and certain cellulosic man-madefibres in cuprammonium solution (basic method)

Close-joint test pieces for testing wood adhesives

Gap-joint test pieces for testing wood adhesives

Standard laminated wood unit for testing woodadhesives

Accelerated degradation of adhesive bonds in wood

Wood failure percentage in an adhesive joint

pH Value of wood adhesives

Apparent dynamic viscosity of wood adhesives

Total solids content (non-volatile matter) of woodadhesives

Insoluble matter content of wood adhesives

Ash content of wood adhesives

Amylaceous and proteinaceous matter detection inwood adhesives

Pot life of reactive liquid wood adhesives

White point temperature (MFFT) of aqueous, woodadhesive dispersions

Resistance of aqueous wood adhesive dispersionsto freezing and thawing

Breaking strength in tension of wood adhesivebonds in close-joint and gap-joint test pieces

Shear strength in compression of wood adhesivebonds - Block shear test

Resistance to delamination of wood adhesive bonds

Detection of thermoplasticity in wood adhesives:Creep test

Title

SANS 6026:2005

SANS 6027:2007

SANS 6028:2007

SANS 6029:2005

SANS 6030:2005

SANS 6031:2005

SANS 6032:2005

SANS 6033:2006

SANS 6034:2005

SANS 6035:2005

SANS 6036:2005

SANS 6037:2005

SANS 6038:2005

SANS 6039:2005

SANS 6040:2005

SANS 6041:2008/ISO 2115:1996, NEQ, Ed. 3

SANS 6042:2005

SANS 6043:2005

SANS 6044:2006

SANS 6045:2007

SANS 6046:2005

SANS Number

(SABS SM 1026)

(SABS SM 1027)

(SABS SM 1028)

(SABS SM 1029)

(SABS SM 1030)

(SABS SM 1031)

(SABS SM 1032)

(SABS SM 1033)

(SABS SM 1034)

(SABS SM 1035)

(SABS SM 1036)

(SABS SM 1037)

(SABS SM 1038)

(SABS SM 1039)

(SABS SM 1040)

(SABS SM 1041)

(SABS SM 1042)

(SABS SM 1043)

(SABS SM 1044)

(SABS SM 1045)

(SABS SM 1046)


October 2009

2

2.01

2.01

2.01

2

2

2.01

2

2

2

2

3.01

2

1

1

1

2

2

3

3

Edition

Water - Dissolved oxygen content

Water - Chemical oxygen demand

Water - Suspended solids content

Water - Sodium content

Water - Oil and grease content

Water - Boron content

Water - Chromium content

Water - Orthophosphate content

Water - Sulfide content

Water - Mercury content

Analysis of plumage fillings (hand-sorting method)

CCA salts equivalent mass concentration ofaqueous solutions that contain mixtures of copper-chromium-arsenic compounds used for timberpreservation

Coking properties of coal (Ruhr dilatometer test)

Yields of tar, water, gas, and coke residue from coalby low temperature distillation

Total ash content (PVC upper, outer sole and heelmaterials)

Ether-soluble matter content (PVC upper, outer soleand heel materials)

Fire test for valves and other assemblies used infire-hazardous situations

Leather and other footwear materials - Resistance toto-and-fro rubbing

Cleaning efficiency of low-foam laundry detergents

Cleaning efficiency of high-foam laundry detergents

Title

SANS 6047:2007

SANS 6048:2005

SANS 6049:2004

SANS 6050:2004

SANS 6051:2007

SANS 6053:2007

SANS 6054:2004

SANS 6055:2006

SANS 6056:2007

SANS 6059:2005

SANS 6060:2005

SANS 6061:2007

SANS 6072:2009

SANS 6073:1984

SANS 6075:1983

SANS 6076:1983

SANS 6077:2006

SANS 6080:1994

SANS 6081:2008

SANS 6082:2008

SANS Number

(SABS SM 1047)

(SABS SM 1048)

(SABS SM 1049)

(SABS SM 1050)

(SABS SM 1051)

(SABS SM 1053)

(SABS SM 1054)

(SABS SM 1055)

(SABS SM 1056)

(SABS SM 1059)

(SABS SM 1060)

(SABS SM 1061)

(SABS SM 1072)

(SABS SM 1073)

(SABS SM 1075)

(SABS SM 1076)

(SABS SM 1077)

(SABS SM 1080)

(SABS SM 1081)

(SABS SM 1082)


October 2009

1.01

2

2.02

2

2

2

2

2

3

2

2

2

2

2

2

1

1

1

1

1

Edition

Modulus of elasticity and modulus of rupture in staticbending of solid timber and glued laminated timberin structural sizes

Colour fastness of textiles to light: Mercury vapourlamp method

Concrete tests - Initial drying shrinkage and wettingexpansion of concrete

Stock remedies - Efficacy of chemicals against ticklarvae

Stock remedies - Efficacy of chemicals against adultticks

Stock remedies - Efficacy confirmation of tickicideson cattle

Stock remedies - Stripping rate of cattle tickicides inspray races

Stock remedies - Stability of cattle tickicides inplunge-dipping tanks

Aerial bundled conductors - Performance ofsupporting cores under mechanical and thermalstresses

Adherence of dielectric to conductor of supportingcores of aerial bundled conductors

Linear density of yarns in weft-knitted fabrics

Stitch length of weft-knitted fabrics

Surface burning properties of textile fabric with araised fibre surface

Wales and courses per unit length in knitted textilefabrics (graduated rule method)

Wales and courses per unit length in knitted textilefabrics (Traversing thread counter method)

Volume of gas in a cartridge

Accumulated impact strength of ladies' shoe heelsof height greater than 25 mm

Accumulated impact strength of steel shanks

Bending modulus of steel shanks for footwear

Resilience of steel shanks for footwear

Title

SANS 6083:2004

SANS 6084:2004

SANS 6085:2006

SANS 6094:2009

SANS 6095:2009

SANS 6096:2009

SANS 6097:2009

SANS 6098:2009

SANS 6100:2007

SANS 6101:2007

SANS 6103:2007

SANS 6104:2007

SANS 6105:2007

SANS 6106:2005

SANS 6107:2005

SANS 6109:1988

SANS 6110:1988

SANS 6111:1988

SANS 6112:1988

SANS 6113:1988

SANS Number

(SABS SM 1083)

(SABS SM 1084)

(SABS SM 1085)

(SABS SM 1094)

(SABS SM 1095)

(SABS SM 1096)

(SABS SM 1097)

(SABS SM 1098)

(SABS SM 1100)

(SABS SM 1101)

(SABS SM 1103)

(SABS SM 1104)

(SABS SM 1105)

(SABS SM 1106)

(SABS SM 1107)

(SABS SM 1109)

(SABS SM 1110)

(SABS SM 1111)

(SABS SM 1112)

(SABS SM 1113)


October 2009

2

2

2

1

1

1

2

1.01

2.01

2.01

2.02

1.01

1.01

1.01

2.01

2

1

1

2

1

Edition

Resistance to actinic degradation of woven curtainand drape fabrics

Resistance to actinic degradation of knitted curtainand drape fabrics

Resistance of textile fabrics to pilling and fuzzing(Random tumble method)

Moisture stability of insole boards and shank boardsfor footwear

Spigot holding strength of ladies' plastics mouldedheel top-pieces

The water-soluble chloride content of material forthermal insulation

Wales and courses per unit length in knitted textilefabrics (fixed aperture method)

Bond quality of laminated timber products (Glulam) -Chisel test

Qualification testing of solid structural timber andlaminated structural timber (glulam) for verifyingtimber grading systems in accordance to a givenstandard

Wooden doors - Determination of stiffness

Wooden doors - Determination of resistance totorsion

Resistance of wooden doors to hard body impact

Resistance of wooden doors to soft body impact

Resistance of wooden doors to slamming

Wooden doors - Class 2 - Determination ofresistance to weathering

Dimensional changes and skewness of textilefabrics on exposure to heat

Pull-off strength of ladies' shoe heels

Wet stitch tear strength of leather welting

Enumeration of sulfate-reducing bacteria - Mostprobable number (MPN) technique

Fatigue bending of granulated cork bottom filler forfootwear

Title

SANS 6114:2007

SANS 6115:2007

SANS 6116:2005

SANS 6117:1988

SANS 6118:1988

SANS 6119:1988

SANS 6120:2005

SANS 6121:2004

SANS 6122:2008

SANS 6123:2004

SANS 6124:2004

SANS 6125:2004

SANS 6126:2004

SANS 6128:2004

SANS 6129:2004

SANS 6130:2006

SANS 6131:1988

SANS 6132:1989

SANS 6133:2007

SANS 6134:1989

SANS Number

(SABS SM 1114)

(SABS SM 1115)

(SABS SM 1116)

(SABS SM 1117)

(SABS SM 1118)

(SABS SM 1119)

(SABS SM 1120)

(SABS SM 1121)

(SABS SM 1122)

(SABS SM 1123)

(SABS SM 1124)

(SABS SM 1125)

(SABS SM 1126)

(SABS SM 1128)

(SABS SM 1129)

(SABS SM 1130)

(SABS SM 1131)

(SABS SM 1132)

(SABS SM 1133)

(SABS SM 1134)


October 2009

1

2

2

2

2

2

2

2

2

2

2

1

2

2

2

2

2

1.01

2

2

Edition

Heat insulation of granulated cork bottom filler forfootwear

Pesticides - Biological evaluation of materials thatrelease an insecticide upon heating

Resistance of cables and cords to flame propagation- Single vertical insulated cable or cord

Permitted explosives: Gallery test

Permitted explosives: Continuity of detonation

Permitted explosives: Water resistance

Permitted explosives: Gap sensitivity

Permitted explosives: Low temperature sensitivity

Permitted explosives: Density

Verification of compression testing machines forconcrete: Calibration of load scale

Free water content of Portland cement extenders

Available alkali content of portland cementextenders

Glass content of granulated metallurgical slag(transmitted-light microscopy method)

Effect of extenders, used with cement, on thereduction of expansion caused by alkali-silicareaction (accelerated mortar prism method)

Water requirement of portland cement extenders

Fineness of cement extenders (45 µm sievemethod)

Metallic coatings - Electrodeposited coatings ofchromium for engineering purposes

Electrical resistance of floors

Non-recoverable extension of textile floor coveringsas imposed by mechanical action

Water-vapour transfer through a textile fabric

Title

SANS 6135:1989

SANS 6136:2003

SANS 6138:2007/IEC 60332-1:1979, MOD

SANS 6141:2007

SANS 6142:2006

SANS 6146:2006

SANS 6147:2006

SANS 6148:2006

SANS 6149:2006

SANS 6150:2006

SANS 6151:2005

SANS 6152:1989

SANS 6154:2006

SANS 6155:2006

SANS 6156:2006

SANS 6157:2007

SANS 6158:2007/ISO 6158:2004, IDT, Ed. 2

SANS 6160:2005

SANS 6161:2005

SANS 6163:2006

SANS Number

(SABS SM 1135)

(SABS SM 1136)

(SABS SM 1138)

(SABS SM 1141)

(SABS SM 1142)

(SABS SM 1146)

(SABS SM 1147)

(SABS SM 1148)

(SABS SM 1149)

(SABS SM 1150)

(SABS SM 1151)

(SABS SM 1152)

(SABS SM 1154)

(SABS SM 1155)

(SABS SM 1156)

(SABS SM 1157)

(SABS ISO 6158)

(SABS SM 1160)

(SABS SM 1161)

(SABS SM 1163)


October 2009

1.01

1.01

1.01

1.01

1.01

1.02

1.01

1.01

1.01

1.01

1.01

1.01

1.01

1.01

1.01

1.01

1.01

3

1.01

1.01

2.01

Edition

Determination of lead (inorganic and tetra-alkyl) inworkplace air by atomic absorptionspectrophotometry

Water - Pretreatment for metal analysis

Water - Aluminium content

Water - Cobalt content

Water - Nickel content

Fire extinguishers - Assessment of fire rating

Fibreboard - Preparation of test specimens

Fibreboard - Measurement of dimensions of testspecimens

Fibreboard - Determination of density

Fibreboard - Determination of linear expansion as aresult of water absorption

Insulation board - Determination of bitumen content

Fibreboard - Determination of lateral nail-holdingstrength

Coated fibreboard - Determination of resistance ofcoating to scraping

Coated fibreboard - Determination of resistance tostaining

Coated fibreboard - Determination of resistance tosteam

Wooden doors - Class 1 - Determination ofresistance to weathering

Pesticides - Sieving of tablets and pellets

Textile floor coverings - Loss of thickness after brief,moderate static loading

Corrugated fibre board - Determination of plyadhesion

Corrugated fibre board - Determination of thickness

Slippage resistance of yarns at standard seams infabrics

Title

SANS 6164:2009

SANS 6168:2004

SANS 6169:2005

SANS 6170:2005

SANS 6171:2004

SANS 6172:2003

SANS 6173:2004

SANS 6174:2004

SANS 6175:2004

SANS 6176:2004

SANS 6177:2004

SANS 6178:2004

SANS 6179:2004

SANS 6180:2004

SANS 6181:2004

SANS 6182:2004

SANS 6183:2006

SANS 6188:2005

SANS 6192:2006

SANS 6193:2006

SANS 6194:2007

SANS Number

(SABS SM 1164)

(SABS SM 1168)

(SABS SM 1169)

(SABS SM 1170)

(SABS SM 1171)

(SABS SM 1172)

(SABS SM 1173)

(SABS SM 1174)

(SABS SM 1175)

(SABS SM 1176)

(SABS SM 1177)

(SABS SM 1178)

(SABS SM 1179)

(SABS SM 1180)

(SABS SM 1181)

(SABS SM 1182)

(SABS SM 1183)

(SABS SM 1188)

(SABS SM 1192)

(SABS SM 1193)

(SABS SM 1194)


October 2009

1.01

1.01

2

2

2

2

2

2

1

1

1

1

2

1.02

1

1

1

1

1

1

1

Edition

Examination for the presence of viable Shigellaorganisms in foods

Examination for the presence of viable pathogenicVibrio organisms in foods

Heat resistance of cables and flexible cords

Extensibility test for extensible leads

Wear resistance of braided and unkinkable cords

Bending test for highly flexible cords such as tinselcords

Extension test for extensible leads

Domestic solar water heaters - Mechanicalqualification tests

Domestic solar water heaters Part 1: Thermalperformance using an outdoor test method

Domestic solar water heaters Part 2: Thermalperformance using an indoor test method

Abrasion resistance of footwear materials(Martindale)

Adhesion in peel of sealant

Permitted electric detonators: Incendivity (Gallerytest)

The Izod impact test for metallic materials

Footwear - Electrical resistance properties

Safety footwear - Penetration resistance

Footwear - Compression resistance

Footwear - Outsole bond strength

Footwear materials - Water vapour coefficient

Footwear materials - Water vapour absorption

Footwear - Corrosion resistance (metalliccomponents)

Title

SANS 6195:2006

SANS 6196:2006

SANS 6204:2007

SANS 6205:2007

SANS 6206:2007

SANS 6207:2007

SANS 6208:2007

SANS 6210:2009

SANS 6211-1:2003

SANS 6211-2:2003

SANS 6215:1993

SANS 6216:1993

SANS 6219:2007

SANS 6223:2008

SANS 6224:1994

SANS 6225:1994

SANS 6226:1994

SANS 6227:1994

SANS 6228:1994

SANS 6229:1994

SANS 6230:1994

SANS Number

(SABS SM 1195)

(SABS SM 1196)

(SABS SM 1204)

(SABS SM 1205)

(SABS SM 1206)

(SABS SM 1207)

(SABS SM 1208)

(SABS SM 1210)

(SABS SM 1215)

(SABS SM 1216)

(SABS SM 1219)

(SABS SM 1223)

(SABS SM 1224)

(SABS SM 1225)

(SABS SM 1226)

(SABS SM 1227)

(SABS SM 1228)

(SABS SM 1229)

(SABS SM 1230)


October 2009

1

1

1.01

1

1

1

1.01

2

1.02

1.01

1.02

1.02

1.01

1.02

1.02

2

1.01

1.01

1.01

1.01

Edition

Footwear materials - Absorption and desorption ofwater

Safety footwear - Penetration-resistant inserts -Flexing resistance

Pesticides - Spontaneous ignition properties of solidfumigants

Footwear - Elastomeric material - Resistance to fueloil

Footwear - Soling material - Hot contact resistance

Footwear - Inserts - Penetration resistance

Retention of boron in timber (analytical method)

Aggregate impact value of coarse aggregate

Electric conductivity of fine aggregate

Particle size distribution of material of diametersmaller than 75 µm in fine aggregate (hydrometermethod)

Acid insolubility of aggregates

Deleterious clay content of the fines in aggregate(methylene blue adsorption indicator test)

Particles of diameter not exceeding 20 µm and notexceeding 5 µm and smaller, respectively, in fineaggregate (pipette method)

Potential reactivity of aggregates with alkalis(accelerated mortar prism method)

Treton impact value of aggregates

Paints and varnishes - Determination of traffic wearindex

Concrete tests - Density of compacted freshly mixedconcrete

Concrete tests - Density of hardened concrete

Concrete tests - Air content of freshly mixedconcrete - Pressure method

Concrete tests - Tensile splitting strength ofconcrete

Title

SANS 6231:1994

SANS 6232:1994

SANS 6234:2006

SANS 6235:1994

SANS 6236:1994

SANS 6237:1994

SANS 6238:2007

SANS 6239:2006

SANS 6240:2008

SANS 6241:2006

SANS 6242:2008

SANS 6243:2008

SANS 6244:2006

SANS 6245:2006

SANS 6246:2006

SANS 6248:2007

SANS 6250:2006

SANS 6251:2006

SANS 6252:2006

SANS 6253:2006

SANS Number

(SABS SM 1231)

(SABS SM 1232)

(SABS SM 1234)

(SABS SM 1235)

(SABS SM 1236)

(SABS SM 1237)

(SABS SM 1238)

(SABS SM 1239)

(SABS SM 1240)

(SABS SM 1241)

(SABS SM 1242)

(SABS SM 1243)

(SABS SM 1244)

(SABS SM 1245)

(SABS SM 1246)

(SABS SM 1248)

(SABS SM 1250)

(SABS SM 1251)

(SABS SM 1252)

(SABS SM 1253)


October 2009

1.01

1.01

2.01

2

2

2

3

1

1.02

1.01

1.01

1.01

1.01

1

2.01

2

2

2

2

2

Edition

Mortar tests - Initial drying shrinkage and wettingexpansion of mortar

Mortar tests - Compressive strength of mortar

Microbiological examination of canned meat and fishproducts

Paints and varnishes - Determination of wet-scrubresistance, washability and cleanability of coatings

Paints and varnishes - Determination of brush androller application properties

Paints and varnishes - Determination of skidresistance

Paints and varnishes - Determination of coefficientof retro-reflected luminance by means of a portableretro-reflectometer

Cigarettes - Sampling

Water - Calcium and magnesium content - Atomicabsorption spectrometric method

Virucidal efficacy of disinfectants and detergent-disinfectants using bacteriophages as indicatororganisms

Enumeration of lipolytic and oxidative organisms infoodstuffs

Microbiological examination of foodstuffs in retortpouches

Welding of thermoplastics - Test methods for weldedjoints

Paints and varnishes - Determination of resistanceto humidity Part 1: Continuous condensation

Boric acid equivalent mass concentration ofaqueous solutions that contain borate timberpreservatives

Paints and varnishes - Determination of residue onsieve

Paints and varnishes - Application by dipping

Test methods for impregnated paper-insulatedelectric cables Part 1: Tests on insulating and semi-conducting paper

Test methods for impregnated paper-insulatedelectric cables Part 2: Tests on metallic sheaths

Test methods for impregnated paper-insulatedelectric cables Part 3: Tests on finished cable

Title

SANS 6254:2006

SANS 6255:2006

SANS 6257:2007

SANS 6258:2003

SANS 6259:2003

SANS 6260:2007

SANS 6261:2008

SANS 6262:1995/ISO 8243:1991, NEQ

SANS 6265:2006

SANS 6266:2009

SANS 6267:2007

SANS 6268:2007

SANS 6269:2005

SANS 6270-1:2004/ISO 6270-1:1998, IDT, Ed. 1

SANS 6278:2007

SANS 6279:2003

SANS 6280:2003

SANS 6281-1:2007

SANS 6281-2:2007

SANS 6281-3:2007

SANS Number

(SABS SM 1254)

(SABS SM 1255)

(SABS SM 1257)

(SABS SM 1258)

(SABS SM 1259)

(SABS SM 1260)

(SABS SM 1261)

(SABS SM 1262)

(SABS SM 1265)

(SABS SM 1266)

(SABS SM 1267)

(SABS SM 1268)

(SABS SM 1269)

(SABS SM 1278)

(SABS SM 1279)

(SABS SM 1280)

(SABS SM 1281-1)

(SABS SM 1281-2)

(SABS SM 1281-3)


October 2009

2

2

2

2

2

2

2

2

2

2

2

2

2

1.01

1.01

1.01

1.01

1.01

1.01

Edition

Test methods for impregnated paper-insulatedelectric cables Part 4: Tests after installation

Test methods for bare conductors and conductors ofinsulated electric cables Part 1: Conductorresistance

Test methods for bare conductors and conductors ofinsulated electric cables Part 2: Quality of metalliccoatings

Test methods for bare conductors and conductors ofinsulated electric cables Part 3: Mechanical tests

Test methods for armouring of insulated electriccables

Test methods for cross-linked polyethylene (XLPE)insulated electric cables Part 1: Tests on XLPEinsulation

Test methods for cross-linked polyethylene (XLPE)insulated electric cables Part 2: Tests on extrudedsemi-conducting screens

Test methods for cross-linked polyethylene (XLPE)insulated electric cables Part 3: Tests on finishedcable

Test methods for cross-linked polyethylene (XLPE)insulated electric cables Part 4: Tests afterinstallation

Test methods for cross-linked polyethylene (XLPE)insulated electric cables Part 5: Ageing tests

Test methods for sheathing of insulated electriccables

Impulse voltage tests on cable and accessories ofrated voltage up to and including 132 kV

Partial discharge measurements on power cables

Lime tests - Chemical analysis - Sample preparationand reagents

Lime tests - Calcium oxide content

Lime tests - Magnesium oxide content

Lime tests - Carbon dioxide content

Lime tests - Available lime content

Lime tests - Free water content of slaked lime

Title

SANS 6281-4:2007

SANS 6282-1:2007/IEC 60055-1:1997, NEQ; IEC60189-1:1986, NEQ, Ed. 2; IEC 60227-2:1997, NEQ;IEC 60245-2:1994, NEQ; IEC 60502:1994, NEQ;TELKOM 268AD:9999, NEQ

SANS 6282-2:2007

SANS 6282-3:2007

SANS 6283:2007/IEC 60055-1:1997, NEQ, Ed. 5;IEC 60502-1:1998, NEQ, Ed. 1; IEC 60502-2:1998,NEQ, Ed. 1.1

SANS 6284-1:2007

SANS 6284-2:2007

SANS 6284-3:2007

SANS 6284-4:2007

SANS 6284-5:2007

SANS 6286:2007

SANS 6289:2007

SANS 6291:2008

SANS 6292:2006

SANS 6293:2006

SANS 6294:2006

SANS 6295:2006

SANS 6296:2006

SANS 6297:2006

SANS Number

(SABS SM 1281-4)

(SABS SM 1282-1)

(SABS SM 1282-2)

(SABS SM 1282-3)

(SABS SM 1283)

(SABS SM 1284-1)

(SABS SM 1284-2)

(SABS SM 1284-3)

(SABS SM 1284-4)

(SABS SM 1284-5)

(SABS SM 1286)

(SABS SM 1289)

(SABS SM 1291)

(SABS SM 1292)

(SABS SM 1293)

(SABS SM 1294)

(SABS SM 1295)

(SABS SM 1296)

(SABS SM 1297)


October 2009

1.01

1.01

1.01

1.02

1.01

1.01

1.01

1.01

1.01

1.01

1.01

1

1

1.01

1

1

1

1

1

1

1

Edition

Lime tests - Loss on ignition

Lime tests - Physical properties - Samplepreparation

Lime tests - Isothermal slaking and preparation ofquicklime

Lime tests - Fineness

Lime tests - General expansion

Depth of penetration of borate preservatives intimber

Lime tests - Pat soundness

Lime tests - Autoclave expansion

Lime tests - Plasticity

Lime tests - Sulfur trioxide content

Sulfate content of water (turbidimetric method)

Road vehicles - Brake linings - Shear test procedurefor disc brake pad and drum brake shoe assemblies

Water quality - Detection and enumeration of Vibriocholerae

Detergents and cleaning agents - Corrosiveness tosteel and aluminium

Methods of chemical analysis of meat and fishproducts

Detergents and cleaning agents - Determination ofcleaning efficiency - Flat rectangular test plates

Detergents and cleaning agents - Determination ofthe effect on painted surfaces

Textiles - Solar UV protective properties - Method oftest for apparel fabrics

Determination of the microbial inhibition of cosmeticsoap bars and liquid hand and body washes

Water quality - Detection of Salmonella species

Textile floor coverings - Assessment of staticelectrical propensity - Walking test

Title

SANS 6298:2006

SANS 6299:2006

SANS 6300:2006

SANS 6301:2006

SANS 6302:2006

SANS 6303:2004

SANS 6305:2006

SANS 6306:2003

SANS 6307:2006

SANS 6308:2006

SANS 6310:2005

SANS 6312:2009/ISO 6312:2001, IDT, Ed. 2

SANS 6315:2003

SANS 6316:2007

SANS 6317:2003

SANS 6318:2003

SANS 6319:2003

SANS 6320:2003

SANS 6321:2009

SANS 6340:2004/ISO 6340:1995, IDT, Ed. 1

SANS 6356:2004/ISO 6356:2000, IDT, Ed. 1

SANS Number

(SABS SM 1298)

(SABS SM 1299)

(SABS SM 1300)

(SABS SM 1301)

(SABS SM 1302)

(SABS SM 1303)

(SABS SM 1305)

(SABS SM 1306)

(SABS SM 1307)

(SABS SM 1308)

(SABS SM 1310)

(SABS SM 1316)


October 2009

1

2

1

1

1

1

1

2

1

1

1

1

3

3

3

1

1

1

1

1

Edition

Meat and meat products - Enumeration ofEscherichia coli - Colony-count technique at 44 °Cusing membranes

Gas cylinders - Seamless steel gas cylinders -Periodic inspection and testing

Water quality - Determination of phenol index - 4-Aminoantipyrine spectrometric methods afterdistillation

Rubber products - Bridge bearings - Specification forrubber materials

Water quality - Detection and enumeration of thespores of sulfite-reducing anaerobes (clostridia) Part1: Method by enrichment in a liquid medium

Water quality - Detection and enumeration of thespores of sulfite-reducing anaerobes (clostridia) Part2: Method by membrane filtration

Rubber, vulcanized - Determination of crystallizationeffects under compression

Paints and varnishes - Determination of hidingpower Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate

Metallic materials - Brinell hardness test Part 1: Testmethod

Metalic materials - Brinell hardness test Part 2:Verification and calibration of testing machines

Metallic materials - Brinell hardness test Part 3:Calibration of reference blocks

Metallic materials - Brinell hardness test Part 4:Table of hardness values

Metallic materials - Vickers hardness test Part 1:Test method

Metallic materials - Vickers hardness test Part 2:Verification and calibration of testing machines

Metallic materials - Vickers hardness test Part 3:Calibration of reference blocks

Metallic materials - Vickers hardness test Part 4:Tables of hardness values

Metallic materials - Rockwell hardness test Part 1:Test method (scales A,B,C,D,E,F,G,H,K,N,T)

Metallic materials - Rockwell hardness test Part 2:Verification and calibration of testing machines(scales A,B,C,D,E,F,G,H,K,N,T)

Metallic materials - Rockwell hardness test Part 3:Calibration of reference blocks (scalesA,B,C,D,E,F,G,H,K,N,T)

Corrosion of metals and alloys - Determination ofdezincification resistance of brass

Title

SANS 6391:1997/ISO 6391:1997, IDT, Ed. 2

SANS 6406:2006/ISO 6406:2005, IDT, Ed. 2

SANS 6439:2006/ISO 6439:1990, IDT, Ed. 2

SANS 6446:2005/ISO 6446:1994, IDT, Ed. 1

SANS 6461-1:2003/ISO 6461-1:1986, IDT, Ed. 1

SANS 6461-2:2003/ISO 6461-2:1986, IDT, Ed. 1

SANS 6471:2003/ISO 6471:1994, IDT, Ed. 2

SANS 6504-3:2007/ISO 6504-3:2006, IDT, Ed. 2

SANS 6506-1:2003/ISO 6506-1:1999, IDT, Ed. 1

SANS 6506-2:2003/ISO 6506-2:1999, IDT, Ed. 1

SANS 6506-3:2003/ISO 6506-3:1999, IDT, Ed. 1

SANS 6506-4:2008/ISO 6506-4:2005, IDT, Ed. 1

SANS 6507-1:2006/ISO 6507-1:2005, IDT, Ed. 3

SANS 6507-2:2006/ISO 6507-2:2005, IDT, Ed. 3

SANS 6507-3:2006/ISO 6507-3:2005, IDT, Ed. 3

SANS 6507-4:2008/ISO 6507-4:2005, IDT, Ed. 1

SANS 6508-1:2003/ISO 6508-1:1999, IDT, Ed. 1

SANS 6508-2:2003/ISO 6508-2:1999, IDT, Ed. 1

SANS 6508-3:2003/ISO 6508-3:1999, IDT, Ed. 1

SANS 6509:1981/ISO 6509:1981, IDT, Ed. 1

SANS Number

(SABS ISO 6391)

(SABS ISO 6406)

(SABS ISO 6504-3)

(SABS ISO 6507-1)

(SABS ISO 6507-2)

(SABS ISO 6507-3)

(SABS ISO 6509)


October 2009

1

1

1

1

1

2

1

1

1

2

1

1

1

1

1

1

2

1

2

Edition

Welding and allied processes - Classification ofgeometric imperfections in metallic materials Part 1:Fusion welding

Welding and allied processes - Classification ofgeometric imperfections in metallic materials Part 2:Welding with pressure

Plain bearings - Thin-walled half-bearings -Checking of peripheral length

Plain bearings - Ring type thrust washers made fromstrip - Dimensions and tolerances

Plain bearings - Pressed bimetallic half thrustwashers - Features and tolerances

Microbiology of food and animal feeding stuffs -Horizontal method for the detection of Salmonellaspp.

Anodizing of aluminium and its alloys -Determination of the fastness to ultra-violet light ofcoloured anodic oxide coatings

Information Technology - Guidelines for thedocumentation of computer-based applicationsystems

Cast iron drainage pipes and fittings - Spigot series

Earth-moving machinery - Seat belts and seat beltanchorages - Performance requirements and tests

Thermoplastic polymers for plain bearings -Classification and designation

Water quality - Determination of cyanide Part 1:Determination of total cyanide

Water quality - Determination of cyanide Part 2:Determination of easily liberatable cyanide

Milk, cream and evaporated milk - Determination oftotal solids content (Reference method)

Water quality - Determination of nitrite - Molecularabsorption spectrometric method

Machinery for forestry - Mobile and self-propelledmachinery - Terms, definitions and classification

Arc welding and cutting - Nonconsumable tungstenelectrodes - Classification

Dental gypsum products

Water quality - Determination of phosphorus -Ammonium molybdate spectrometric method

Title

SANS 6520-1:2005/ISO 6520-1:1998, IDT, Ed. 1

SANS 6520-2:2004/ISO 6520-2:2001, IDT, Ed. 1

SANS 6524:2005/ISO 6524:1992, IDT, Ed. 2

SANS 6525:2005/ISO 6525:1983, IDT, Ed. 1

SANS 6526:2005/ISO 6526:1983, IDT, Ed. 1

SANS 6579:2003/ISO 6579:2002, IDT, Ed. 4

SANS 6581:1980/ISO 6581:1980, IDT, Ed. 1


SANS 6594:2008/ISO 6594:2006, IDT, Ed. 2

SANS 6683:2008/ISO 6683:2005, IDT, Ed. 2

SANS 6691:2005/ISO 6691:2000, IDT, Ed. 2

SANS 6703-1:2005/ISO 6703-1:1984, IDT, Ed. 1

SANS 6703-2:2005/ISO 6703-2:1984, IDT, Ed. 1

SANS 6731:2005/ISO 6731:1989, IDT, Ed. 1

SANS 6777:1984/ISO 6777:1984, IDT, Ed. 1

SANS 6814:2003/ISO 6814:2000, IDT, Ed. 2

SANS 6848:2007/ISO 6848:2004, IDT, Ed. 2

SANS 6873:2008/ISO 6873:1998, IDT, Ed. 2

SANS 6878:2006/ISO 6878:2004, IDT, Ed. 2

SANS Number

(SABS ISO 6579)

(SABS ISO 6581)

(SABS ISO 6777)

(SABS ISO 6848)

(SABS ISO 6878)


October 2009

1

1

1

1

1

1

1

1

2

1

2

2

1

1

1

Edition

Microbiology of food and animal feeding stuffs -Preparation of test samples, initial suspension anddecimal dilutions for microbiological examinationPart 1: General rules for the preparation of the initialsuspension and decimal dilutions

Microbiology of food and animal feeding stuffs -Preparation of test samples, initial suspension anddecimal dilutions for microbiological examinationPart 2: Specific rules for the preparation of meat andmeat products

Microbiology of food and animal feeding stuffs -Preparation of test samples, initial suspension anddecimal dilutions for microbiological examinationPart 3: Specific rules for the preparation of fish andfishery products

Microbiology of food and animal feeding stuffs -Preparation of test samples, initial suspension anddecimal dilutions for microbiological examinationPart 4: Specific rules for the preparation of productsother than milk and milk products, meat and meatproducts, and fish and fishery products

Microbiology of food and animal feeding stuffs -Horizontal method for the enumeration ofcoagulase-positive staphylococci (Staphylococcusaureus and other species) Part 1: Technique usingBaird-Parker agar medium

Microbiology of food and animal feeding stuffs -Horizontal method for the enumeration ofcoagulase-positive staphylococci (Staphylococcusaureus and other species) Part 2: Technique usingrabbit plasma fibrinogen agar medium

Microbiology of food and animal feeding stuffs -Horizontal method for the enumeration ofcoagulase-positive staphylococci (staphylococcusaureus and other species) Part 3: Detection andMPN technique for low numbers

Timber structures - Joints made with mechanicalfasteners - General principles for the determinationof strength and deformation characteristics

Metallic materials - Tensile testing at ambienttemperature

Textiles - Natural fibres - Generic names anddefinitions

Textile fabrics - Burning behaviour - Determinationof ease of ignition of vertically oriented specimens

Textile fabrics - Burning behaviour - Measurement offlame spread properties of vertically orientedspecimens

Building components and building elements -Thermal resistance and thermal transmittance -Calculation method

Welds - Working positions - Definitions of angles ofslope and rotation

Cranked-link drag chains of welded construction,attachments and sprockets

Title

SANS 6887-1:1999/ISO 6887-1:1999, IDT, Ed. 1

SANS 6887-2:2004/ISO 6887-2:2003, IDT, Ed. 1

SANS 6887-3:2004/ISO 6887-3:2003, IDT, Ed. 1

SANS 6887-4:2004/ISO 6887-4:2003, IDT, Ed. 1

SANS 6888-1:1999/ISO 6888-1:1999, IDT, Ed. 1

SANS 6888-2:1999/ISO 6888-2:1999, IDT, Ed. 1

SANS 6888-3:2005/ISO 6888-3:2003, IDT, Ed. 1

SANS 6891:1983/ISO 6891:1983, IDT, Ed. 1

SANS 6892:1998/ISO 6892:1998, IDT, Ed. 2

SANS 6938:1984/ISO 6938:1984, IDT, Ed. 1

SANS 6940:2005/ISO 6940:2004, IDT, Ed. 2

SANS 6941:2004/ISO 6941:2003, IDT, Ed. 2

SANS 6946:2007/ISO 6946:1996, IDT, Ed. 1

SANS 6947:1990/ISO 6947:1990, IDT, Ed. 2

SANS 6971:2006/ISO 6971:2002, IDT, Ed. 2

SANS Number

(SABS ISO 6887-1)

(SABS ISO 6888-1)

(SABS ISO 6888-2)

(SABS ISO 6891)

(SABS ISO 6892)

(SABS ISO 6938)

(SABS ISO 6940)

(SABS ISO 6941)

(SABS ISO 6947)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

2

1

1

2

Edition

Cranked-link mill chains of welded construction,attachments and sprockets

Drop-forged rivetless chains for conveyors

Metallic and other non-organic coatings - Sulfurdioxide test with general condensation of moisture

Buried, high-impact poly(vinyl chloride) (PVC-HI)pipes for the supply of gaseous fuels - Specifications

Graphical symbols - Public information symbols

Information technology - Security techniques -Check character systems

Plain bearings - Terms, characteristics and causesof damage and changes in appearance

Plain bearings - Testing of the tribological behaviourof bearing materials Part 2: Testing of polymer-based bearing materials

Fire extinguishing media - Foam concentrates Part1: Specification for low expansion foam concentratesfor top application to water-immiscible liquids

Fire extinguishing media - Foam concentrates Part2: Specification for medium and high expansionfoam concentrates for top application to water-immiscible liquids

Fire extinguishing media - Foam concentrates Part3: Specification for low expansion foam concentratesfor top application to water-miscible liquids

Textiles - Woven fabrics - Construction - Methods ofanalysis Part 2: Determination of number of threadsper unit length

Textiles - Woven fabrics - Construction - Methods ofanalysis Part 3: Determination of crimp of yarn infabric

Textiles - Woven fabrics - Construction - Methods ofanalysis Part 4: Determination of twist in yarnremoved from fabric

Textiles - Woven fabrics - Construction - Methods ofanalysis Part 5: Determination of linear density ofyarn removed from fabric

Microbiology of food and animal feeding stuffs -General requirements and guidance formicrobiological examinations

Fire detection and alarm systems Part 16: Soundsystem control and indicating equipment

Fire detection and alarm systems Part 19: Design,installation, commissioning and service of soundsystems for emergency purposes

Microbiology of food and animal feeding stuffs -Horizontal method for the detection andenumeration of presumptive Escherichia coli - Mostprobable number technique

Title

SANS 6972:2006/ISO 6972:2002, IDT, Ed. 2

SANS 6973:2006/ISO 6973:1986, IDT, Ed. 1

SANS 6988:1985/ISO 6988:1985, IDT, Ed. 1

SANS 6993:2004/ISO 6993:2001, IDT, Ed. 2

SANS 7001:2008/ISO 7001:2007, IDT, Ed. 3


SANS 7146:2005/ISO 7146:1993, IDT, Ed. 1

SANS 7148-2:2005/ISO 7148-2:1999, IDT, Ed. 1

SANS 7203-1:2007/ISO 7203-1:1995, IDT, Ed. 1

SANS 7203-2:2007/ISO 7203-2:1995, IDT, Ed. 1

SANS 7203-3:2007/ISO 7203-3:1999, IDT, Ed. 1

SANS 7211-2:1984/ISO 7211-2:1984, IDT, Ed. 1

SANS 7211-3:1984/ISO 7211-3:1984, IDT, Ed. 1

SANS 7211-4:1984/ISO 7211-4:1984, IDT, Ed. 1

SANS 7211-5:1984/ISO 7211-5:1984, IDT, Ed. 1

SANS 7218:2008/ISO 7218:2007, IDT, Ed. 3

SANS 7240-16:2008/ISO 7240-16:2007, IDT, Ed. 1

SANS 7240-19:2008/ISO 7240-19:2007, IDT, Ed. 1

SANS 7251:2005/ISO 7251:2005, IDT, Ed. 3

SANS Number

(SABS ISO 6988)

(SABS ISO 7211-2)

(SABS ISO 7211-3)

(SABS ISO 7211-4)

(SABS ISO 7211-5)

(SABS ISO 7218)

(SABS ISO 7251)


October 2009

2

1

1

1

1

1

2

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Paints and varnishes - Determination of resistanceto neutral salt spray (fog)

Resistance welding equipment - Particularspecifications applicable to transformers with twoseparate secondary windings for multi-spot welding,as used in the automobile industry

Graphical symbols for resistance welding equipment

Cranes - Graphic symbols Part 1: General

Cranes - Graphical symbols Part 3: Tower cranes

Cranes and lifting appliances - Technicalcharacteristics and acceptance documents

Household refrigerating appliances - Refrigeratorswith or without low-temperature compartment -Characteristics and test methods

Water quality - Determination of free chlorine andtotal chlorine Part 1: Titrimetric method using N,N-diethyl-1,4-phenylenediamine

Water quality - Determination of free chlorine andtotal chlorine Part 2: Colorimetric method using N,N-diethyl-1,4-phenylenediamine, for routine controlpurposes

Water quality - Determination of free chlorine andtotal chlorine Part 3: Iodometric titration method forthe determination of total chlorine

Medical gas pipeline systems Part 2: Anaestheticgas scavenging disposal systems

Methods for the petrographic analysis of bituminouscoal and anthracite Part 1: Vocabulary

Methods for the petrographic analysis of bituminouscoal and anthracite Part 2: Method of preparing coalsamples

Methods for the petrographic analysis of bituminouscoal and anthracite Part 3: Method of determiningmaceral group composition

Methods for the petrographic analysis of bituminouscoal and anthracite Part 5: Method of determiningmicroscopically the reflectance of vitrinite

Metallic materials - Bend test

Copper-bearing intra-uterine contraceptive devices -Requirements, tests

Glass fibre reinforced plastics cisterns for cold-waterstorage Part 2: Specification for one-piece cisternsof nominal capacity from 500 l to 25 000 l

Glass fibre reinforced plastics cisterns for cold waterstorage Part 3: Specification for sectional tanks

Title

SANS 7253:1996/ISO 7253:1996, IDT, Ed. 2

SANS 7284:1993/ISO 7284:1993, IDT, Ed. 2

SANS 7286:1986/ISO 7286:1986, IDT, Ed. 1

SANS 7296-1:2007/ISO 7296-1:1991, IDT, Ed. 1

SANS 7296-3:2007/ISO 7296-3:2006, IDT, Ed. 1

SANS 7363:2002/ISO 7363:1986, IDT, Ed. 1

SANS 7371:1995/ISO 7371:1995, IDT, Ed. 2

SANS 7393-1:2005/ISO 7393-1:1985, IDT, Ed. 1

SANS 7393-2:2005/ISO 7393-2:1985, IDT, Ed. 1

SANS 7393-3:2005/ISO 7393-3:1990, IDT, Ed. 2

SANS 7396-2:2008/ISO 7396-2:2007, IDT, Ed. 2

SANS 7404-1:1994/ISO 7404-1:1994, IDT, Ed. 2

SANS 7404-2:1985/ISO 7404-2:1985, IDT, Ed. 1

SANS 7404-3:1994/ISO 7404-3:1994, IDT, Ed. 2

SANS 7404-5:1994/ISO 7404-5:1994, IDT, Ed. 2

SANS 7438:2003/ISO 7438:1985, IDT, Ed. 1

SANS 7439:2009/ISO 7439:2002, IDT, Ed. 2

SANS 7491-2:1992/BS 7491-2:1992, IDT

SANS 7491-3:1994/BS 7491-3:1994, IDT

SANS Number

(SABS ISO 7253)

(SABS ISO 7284)

(SABS ISO 7286)

(SABS ISO 7371)

(SABS ISO 7404-1)

(SABS ISO 7404-2)

(SABS ISO 7404-3)

(SABS ISO 7404-5)

(SABS BS 7491-2)

(SABS BS 7491-3)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

2

Edition

Wire rope slings for general purposes -Characteristics and specifications

Electroplated coatings of tin-lead alloys -Specification and test methods

Calibrated round steel link lifting chains - Guidelinesto proper use and maintenance

Chain slings assembled by methods other thanwelding - Grade T(8)

Rubber - Determination of indentation hardness bymeans of pocket hardness meters

Rubber, vulcanized or thermoplastic - Determinationof indentation hardness Part 2: IRHD pocket metermethod

Plastics piping systems for soil and waste discharge(low and high temperature) inside buildings -Chlorinated poly(vinyl chloride) (PVC-C)

Plastics piping systems for soil and waste discharge(low and high temperature) inside buildings -Acrylonitrile-butadiene-styrene (ABS)

Paints and varnishes - Colorimetry Part 1: Principles

Paints and varnishes - Colorimetry Part 2: Colourmeasurement

Paints and varnishes - Colorimetry Part 3:Calculation of colour differences

Rubber, vulcanized or thermoplastic - Determinationof compression stress-strain properties

Lifting appliances - Controls - Layout andcharacteristics Part 1: General principles

Lifting appliances - Controls - Layout andcharacteristics Part 2: Basic arrangement andrequirements for mobile cranes

Cranes - Controls - Layout and characteristics Part3: Tower cranes

Lifting appliances - Controls - Layout andcharacteristics - Part 5: Overhead travelling cranesand portal bridge cranes

Metallic materials - Sheet and strip 3 mm thick orless - Reverse bend test

Metallic materials - Wire - Reverse bend test

Metallic materials - Wire - Wrapping test

Identification cards - Physical characteristics

Title

SANS 7531:1987/ISO 7531:1987, IDT, Ed. 1

SANS 7587:1986/ISO 7587:1986, IDT, Ed. 1

SANS 7592:1983/ISO 7592:1983, IDT, Ed. 1

SANS 7593:1986/ISO 7593:1986, IDT, Ed. 1

SANS 7619:2003/ISO 7619:1997, IDT, Ed. 2

SANS 7619-2:2009/ISO 7619-2:2004, IDT, Ed. 1

SANS 7675:2004/ISO 7675:2003, IDT, Ed. 2

SANS 7682:2006/ISO 7682:2003, IDT, Ed. 2

SANS 7724-1:1984/ISO 7724-1:1984, IDT, Ed. 1

SANS 7724-2:1984/ISO 7724-2:1984, IDT, Ed. 1

SANS 7724-3:1984/ISO 7724-3:1984, IDT, Ed. 1

SANS 7743:2003/ISO 7743:1989, IDT, Ed. 1

SANS 7752-1:2007/ISO 7752-1:1983, IDT, Ed. 1

SANS 7752-2:2007/ISO 7752-2:1985, IDT, Ed. 1

SANS 7752-3:2007/ISO 7752-3:1993, IDT, Ed. 1

SANS 7752-5:2002/ISO 7752-5:1985, IDT, Ed. 1

SANS 7799:2003/ISO 7799:1985, IDT, Ed. 1

SANS 7801:2003/ISO 7801:1984, IDT, Ed. 1

SANS 7802:2003/ISO 7802:1983, IDT, Ed. 1


SANS Number

(SABS ISO 7531)

(SABS ISO 7587)

(SABS ISO 7592)

(SABS ISO 7593)

(SABS ISO 7724-1)

(SABS ISO 7724-2)

(SABS ISO 7724-3)

(SABS ISO/IEC 7810)


October 2009

2

2

3

1

3

3

3

1

2

2

3

2

2

2

1

2

1

1

1

Edition

Identification cards - Recording technique Part 1:Embossing

Identification cards - Recording technique Part 2:Magnetic stripe - Low coercivity

Identification cards - Recording technique Part 6:Magnetic stripe - High coercivity

Identification cards - Recording technique Part 2:Tactile identifier mark

Identification cards - Identification of issuers Part 1:Numbering system

Identification cards - Identification of issuers Part 2:Application and registration procedures

Information technology - Identification cards -Financial transaction cards

Identification cards - Integrated circuit(s) cards withcontacts Part 1: Physical characteristics

Identification cards - Integrated circuit cards Part 2:Cards with contacts - Dimensions and location of thecontacts

Information technology - Identification cards -Integrated circuit(s) cards with contacts Part 3:Electronic signals and transmission protocols

Identification cards - Integrated circuit cards - Part 3:Cards with contacts - Electrical interface andtransmission protocols

Identification cards - Integrated circuit cards Part 4:Organization, security and commands forinterchange

Identification cards - Integrated circuit cards Part 5:Registration of application providers

Identification cards - Integrated circuit cards Part 6:Interindustry data elements for interchange

Identification cards - Integrated circuit(s) cards withcontacts Part 7: Interindustry commands forStructured Card Query Language (SCQL)

Identification cards - Integrated circuit cards Part 8:Commands for security operations

Identification cards - Integrated circuit cards Part 9:Commands for card management

Identification cards - Integrated circuit(s) cards withcontacts Part 10: Electronic signals and answer toreset for synchronous cards

Identification cards - Integrated circuit cards Part 11:Personal verification through biometric methods

Title


















SANS 7816-10:1999/ISO/IEC 7816-10:1999, IDT, Ed.1


SANS Number

(SABS ISO/IEC 7811-1)





(SABS ISO/IEC 7813)












October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

2

2

1

1

Edition

Identification cards - Integrated circuit cards Part 12:Cards with contacts - USB electrical interface andoperating procedures

Identification cards - Integrated circuit cards Part 13:Commands for application management in a multi-application environment

Identification cards - Integrated circuit cards Part 15:Cryptographic information application

Small craft - Fire-resistant fuel hoses

Gas cylinders - Refillable seamless aluminium alloygas cylinders - Design, construction and testing

Control charts Part 1: General guidelines

Water quality - Determination of surfactants Part 1:Determination of anionic surfactants bymeasurement of the methylene blue index (MBAS)

Water quality - Examination and determination ofcolour

Water quality - Determination of electricalconductivity

Water quality - Detection and enumeration ofintestinal enterococci Part 1: Miniaturized method(Most Probable Number) for surface and wastewater

Water quality - Detection and enumeration ofintestinal enterococci Part 2: Membrane filtrationmethod

Plain bearings - Symbols Part 1: Basic symbols

Plain bearings - Symbols Part 2: Applications

Insulation caps and bushes for resistance weldingequipment

Microbiology of food and animal feeding stuffs -Horizontal method for the enumeration ofpresumptive Bacillus cereus - Colony-counttechnique at 30 °C

Microbiology of food and animal feeding stuffs -Horizontal method for the enumeration ofClostridium perfringens - Colony-count technique

Microbiology - General guidance for enumeration ofyeasts and moulds - Colony count technique at 25°C

Mechanical contraceptives - Reusable natural andsilicone rubber contraceptive diaphragms -Requirements and tests

Title




SANS 7840:2008/ISO 7840:2004, IDT, Ed. 3

SANS 7866:1999/ISO 7866:1999, IDT, Ed. 1

SANS 7870-1:2008/ISO 7870-1:2007, IDT, Ed. 1

SANS 7875-1:2006/ISO 7875-1:1996, IDT, Ed. 2

SANS 7887:2005/ISO 7887:1994, IDT, Ed. 2

SANS 7888:2005/ISO 7888:1985, IDT, Ed. 1

SANS 7899-1:2004/ISO 7899-1:1998, IDT, Ed. 2

SANS 7899-2:2004/ISO 7899-2:2000, IDT, Ed. 2

SANS 7904-1:2006/ISO 7904-1:1995, IDT, Ed. 1

SANS 7904-2:2006/ISO 7904-2:1995, IDT, Ed. 1

SANS 7931:1985/ISO 7931:1985, IDT, Ed. 1

SANS 7932:2005/ISO 7932:2004, IDT, Ed. 3

SANS 7937:2007/ISO 7937:2004, IDT, Ed. 3

SANS 7954:1987/ISO 7954:1987, IDT, Ed. 1

SANS 8009:2007/ISO 8009:2004, IDT, Ed. 1

SANS Number

(SABS ISO 7866)

(SABS ISO 7931)

(SABS ISO 7937)

(SABS ISO 7954)


October 2009

1

2

1

1

1

2

2

1

1

1

1

1

1

1

2

1

1

1

1

1

Edition

Self-propelled machinery for forestry - Roll-overprotective structures - Laboratory tests andperformance requirements

Machinery for forestry - Falling-object protectivestructures (FOPS) - Laboratory tests andperformance requirements

Machinery for forestry - Operator protectivestructures - Laboratory tests and performancerequirements

Mobile cranes - Drum and sheave sizes

Small craft - Toilet waste retention systems

Safety of toys Part 1: Safety aspects related tomechanical and physical properties

Safety of toys Part 2: Flammability

Safety of toys Part 3: Migration of certain elements

Thermal insulation - Mineral wool mats for ventilatedroof spaces Part 1: Specification for applicationswith restricted ventilation

Water quality - Determination of selectedmonovalent phenols Part 2: Method by derivatizationand gas chromatography

Projections for resistance welding

Household refrigerating appliances - Refrigerator-freezers - Characteristics and test methods

Furniture - Assessment of the ignitability ofupholstered furniture Part 1: Ignition source:smouldering cigarette

Furniture - Assessment of ignitability of upholsteredfurniture Part 2: Ignition source: match-flameequivalent

Water quality - General guidance on theenumeration of micro-organisms by culture

Acoustics - Audible emergency evacuation signal

Gas welding equipment - Specification for hoseassemblies for equipment for welding, cutting andallied processes

Operations and baths relating to dry-cleaningmachines - Vocabulary

Safety requirements for dry-cleaning machinesusing perchloroethylene

Closed-circuit dry-cleaning machines - Defining andchecking of machine characteristics

Title

SANS 8082:2003/ISO 8082:2003, IDT, Ed. 2

SANS 8083:2008/ISO 8083:2006, IDT, Ed. 2

SANS 8084:2003/ISO 8084:2003, IDT, Ed. 1

SANS 8087:2008/ISO 8087:1985, IDT, Ed. 1

SANS 8099:2008/ISO 8099:2000, IDT, Ed. 2

SANS 8124-1:2009/ISO 8124-1:2009, IDT, Ed. 2

SANS 8124-2:2008/ISO 8124-2:2007, IDT, Ed. 2

SANS 8124-3:1997/ISO 8124-3:1997, IDT, Ed. 1

SANS 8144-1:2006/ISO 8144-1:1995, IDT, Ed. 1

SANS 8165-2:1999/ISO 8165-2:1999, IDT, Ed. 1

SANS 8167:1989/ISO 8167:1989, IDT, Ed. 1

SANS 8187:1991/ISO 8187:1991, IDT, Ed. 1

SANS 8191-1:1987/ISO 8191-1:1987, IDT, Ed. 1

SANS 8191-2:1988/ISO 8191-2:1988, IDT, Ed. 1

SANS 8199:2006/ISO 8199:2005, IDT, Ed. 2

SANS 8201:1987/ISO 8201:1987, IDT, Ed. 1

SANS 8207:2004/ISO 8207:1996, IDT, Ed. 1

SANS 8229:1991/ISO 8229:1991, IDT, Ed. 1

SANS 8230:1997/ISO 8230:1997, IDT, Ed. 1

SANS 8232:1988/ISO 8232:1988, IDT, Ed. 1

SANS Number

(SABS ISO 8124-2)

(SABS ISO 8124-3)

(SABS ISO 8165-2)

(SABS ISO 8167)

(SABS ISO 8187)

(SABS ISO 8191-1)

(SABS ISO 8191-2)

(SABS ISO 8201)

(SABS ISO 8229)

(SABS ISO 8230)

(SABS ISO 8232)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Acoustics - Audiometric test methods Part 1: Basicpure tone air and bone conduction thresholdaudiometry

Acoustics - Audiometric test methods Part 2: Soundfield audiometry with pure tone and narrow-band testsignals

Acoustics - Audiometric test methods Part 3:Speech audiometry

Milk and milk products - General guidance for thepreparation of test samples, initial suspensions anddecimal dilutions for microbiological examination

Hard coal - Determination of the swelling propertiesusing a dilatometer

Acoustics - Determination of sound power levels ofmultisource industrial plants for evaluation of soundpressure levels in the environment - Engineeringmethod

Shipbuilding and marine structures - Trunnionpieces for span bearings and lead block bearings

Injection containers for injectables and accessoriesPart 1: Injection vials made of glass tubing

Knitted fabrics - Types - Vocabulary

Metallic coatings - Review of methods ofmeasurement of ductility

Animal and vegetable fats and oils - Determinationof content of polar compounds

Resistance spot welding - Electrode holders Part 1:Taper fixing 1:10

Resistance spot welding - Electrode holders Part 2:Morse taper fixing

Resistance spot welding - Electrode holders Part 3:Parallel shank fixing for end thrust

Rolling bearings - Radial ball bearings with flangedouter ring - Flange dimensions

Water quality - Calibration and evaluation ofanalytical methods and estimation of performancecharacteristics Part 1: Statistical evaluation of thelinear calibration function

Water quality - Calibration and evaluation ofanalytical methods and estimation of performancecharacteristics Part 2: Calibration strategy for non-linear second-order calibration functions

Small craft - Non-fire-resistant fuel hoses

Metallic materials - Tube (in full section) - Bend test

Title

SANS 8253-1:1989/ISO 8253-1:1989, IDT, Ed. 1

SANS 8253-2:1992/ISO 8253-2:1992, IDT, Ed. 1

SANS 8253-3:1996/ISO 8253-3:1996, IDT, Ed. 1

SANS 8261:2005/ISO 8261 IDF 122:2001, IDT, Ed. 2

SANS 8264:1989/ISO 8264:1989, IDT, Ed. 1

SANS 8297:1994/ISO 8297:1994, IDT, Ed. 1

SANS 8314:2005/ISO 8314:1987, IDT, Ed. 1

SANS 8362-1:1989/ISO 8362-1:1989, IDT, Ed. 1

SANS 8388:1998/ISO 8388:1998, IDT, Ed. 1

SANS 8401:1986/ISO 8401:1986, IDT, Ed. 1

SANS 8420:2003/ISO 8420:2002, IDT, Ed. 2

SANS 8430-1:1988/ISO 8430-1:1988, IDT, Ed. 1

SANS 8430-2:1988/ISO 8430-2:1988, IDT, Ed. 1

SANS 8430-3:1988/ISO 8430-3:1988, IDT, Ed. 1

SANS 8443:2005/ISO 8443:1999, IDT, Ed. 2

SANS 8466-1:2002/ISO 8466-1:1990, IDT, Ed. 1

SANS 8466-2:2002/ISO 8466-2:2001, IDT, Ed. 2

SANS 8469:2008/ISO 8469:2006, IDT, Ed. 2

SANS 8491:2003/ISO 8491:1998, IDT, Ed. 2

SANS Number

(SABS ISO 8253-1)

(SABS ISO 8253-2)

(SABS ISO 8253-3)

(SABS ISO 8264)

(SABS ISO 8297)

(SABS ISO 8362-1)

(SABS ISO 8388)

(SABS ISO 8401)

(SABS ISO 8430-1)

(SABS ISO 8430-2)

(SABS ISO 8430-3)

(SABS33)


October 2009

1

1

1

1

1

1

2

1

1

1

1

2

2

2

2

2

2

Edition

Metallic materials - Tube - Flattening test

Metallic materials - Tube - Drift-expanding test

Metallic materials - Tube - Flanging test

Metallic materials - Tube - Ring-expanding test

Metallic materials - Tube - Ring tensile test

Woven fabrics - Description of defects - Vocabulary

Knitted fabrics - Description of defects - Vocabulary

Preparation of steel substrates before application ofpaints and related products - Visual assessment ofsurface cleanliness Part 3: Preparation grades ofwelds, edges and other areas with surfaceimperfections

Preparation of steel substrates before application ofpaint and related products - Tests for theassessment of surface cleanliness Part 3:Assessment of dust on steel surfaces prepared forpainting (pressure-sensitive tape method)

Preparation of steel substrates before application ofpaint and related products - Tests for theassessment of surface cleanliness Part 2:Laboratory determination of chloride on cleanedsurfaces

Preparation of steel substrates before application ofpaint and related products - Tests for theassessment of surface cleanliness Part 5:Measurement of chloride on steel surfaces preparedfor painting (ion detection tube method)

Reciprocating internal combustion engine drivenalternating current generating sets Part 1:Application, ratings and performance

Reciprocating internal combustion engine drivenalternating current generating sets Part 2: Engines

Reciprocating internal combustion engine drivenalternating current generating sets Part 3:Alternating current generators for generating sets

Reciprocating internal combustion engine drivenalternating current generating sets Part 4:Controlgear and switchgear

Reciprocating internal combustion engine drivenalternating current generating sets Part 5:Generating sets

Reciprocating internal combustion engine drivenalternating current generating sets Part 6: Testmethods

Title

SANS 8492:2003/ISO 8492:1998, IDT, Ed. 2

SANS 8493:2003/ISO 8493:1998, IDT, Ed. 2

SANS 8494:2003/ISO 8494:1998, IDT, Ed. 2

SANS 8495:2003/ISO 8495:1998, IDT, Ed. 2

SANS 8496:2003/ISO 8496:1998, IDT, Ed. 2

SANS 8498:1990/ISO 8498:1990, IDT, Ed. 1

SANS 8499:2004/ISO 8499:2003, IDT, Ed. 2

SANS 8501-3:2008/ISO 8501-3:2006, IDT, Ed. 2

SANS 8502-3:2008/ISO 8502-3:1992, IDT, Ed. 1

SANS 8502-2:2008/ISO 8502-2:2005, IDT, Ed. 2

SANS 8502-5:2008/ISO 8502-5:1998, IDT, Ed. 1

SANS 8528-1:2008/ISO 8528-1:2005, IDT, Ed. 2

SANS 8528-2:2008/ISO 8528-2:2005, IDT, Ed. 2

SANS 8528-3:2008/ISO 8528-3:2005, IDT, Ed. 2

SANS 8528-4:2008/ISO 8528-4:2005, IDT, Ed. 2

SANS 8528-5:2008/ISO 8528-5:2005, IDT, Ed. 2

SANS 8528-6:2008/ISO 8528-6:2005, IDT, Ed. 2

SANS Number

(SABS ISO 8498)

(SABS ISO 8499)

(SABS ISO 8528-1)

(SABS ISO 8528-2)

(SABS ISO 8528-3)

(SABS ISO 8528-4)

(SABS ISO 8528-5)

(SABS ISO 8528-6)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

2

1

1

1

1

1

1

Edition

Reciprocating internal combustion engine drivenalternating current generating sets Part 7: Technicaldeclarations for specification and design

Reciprocating internal combustion engine drivenalternating current generating sets Part 8:Requirements and tests for low-power generatingsets

Reciprocating internal combustion engine drivenalternating current generating sets Part 9:Measurement and evaluation of mechanicalvibrations

Reciprocating internal combustion engine drivenalternating current generating sets Part 10:Measurement of airborne noise by the envelopingsurface method

Reciprocating internal combustion engine drivenalternating current generating sets Part 12:Emergency power supply to safety services

Forged steel lifting components for use with gradeT(8) chain

Textile floor coverings - Methods for determination ofmass

Cranes - Cabins Part 1: General

Cranes - Cabins Part 2: Mobile cranes

Cranes - Cabins Part 3: Tower cranes

Cranes - Cabins Part 4: Jib cranes

Cranes - Cabins Part 5: Overhead travelling andportal bridge cranes

Data elements and interchange formats -Information interchange - Representation of datesand times

Hand-held portable power tools - Measurement ofvibrations at the handle Part 1: General

Hand-held portable power tools - Measurement ofvibrations at the handle Part 2: Chipping hammersand riveting hammers

Hand-held portable power tools - Measurement ofvibrations at the handle Part 3: Rock drills and rotaryhammers

Hand-held portable power tools - Measurement ofvibrations at the handle Part 4: Grinders

Hand-held portable power tools - Measurement ofvibrations at the handle Part 5: Pavement breakersand hammers for construction work

Hand-held portable power tools - Measurement ofvibrations at the handle Part 6: Impact drills

Title

SANS 8528-7:1994/ISO 8528-7:1994, IDT, Ed. 1

SANS 8528-8:2006/ISO 8528-8:1995, IDT, Ed. 1

SANS 8528-9:2006/ISO 8528-9:1995, IDT, Ed. 1

SANS 8528-10:2006/ISO 8528-10:1998, IDT, Ed. 1

SANS 8528-12:2006/ISO 8528-12:1997, IDT, Ed. 1

SANS 8539:1986/ISO 8539:1986, IDT, Ed. 1

SANS 8543:1998/ISO 8543:1998, IDT, Ed. 2

SANS 8566-1:2002/ISO 8566-1:1992, IDT, Ed. 1

SANS 8566-2:2007/ISO 8566-2:1995, IDT, Ed. 1

SANS 8566-3:2007/ISO 8566-3:1992, IDT, Ed. 1

SANS 8566-4:2008/ISO 8566-4:1998, IDT, Ed. 1

SANS 8566-5:2002/ISO 8566-5:1992, IDT, Ed. 1

SANS 8601:2009/ISO 8601:2004, IDT, Ed. 3

SANS 8662-1:1988/ISO 8662-1:1988, IDT, Ed. 1

SANS 8662-2:1992/ISO 8662-2:1992, IDT, Ed. 1

SANS 8662-3:1992/ISO 8662-3:1992, IDT, Ed. 1

SANS 8662-4:1994/ISO 8662-4:1994, IDT, Ed. 1

SANS 8662-5:2003/ISO 8662-5:1992, IDT, Ed. 1

SANS 8662-6:2003/ISO 8662-6:1994, IDT, Ed. 1

SANS Number

(SABS ISO 8528-7)

(SABS ISO 8539)

(SABS ISO 8543)

(SABS ISO 8662-1)

(SABS ISO 8662-2)

(SABS ISO 8662-3)

(SABS ISO 8662-4)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

2

1

Edition

Hand-held portable power tools - Measurement ofvibrations at the handle Part 7: Wrenches,screwdrivers and nut runners with impact, impulse orratchet action

Hand-held portable power tools - Measurement ofvibrations at the handle Part 8: Polishers and rotary,orbital and random orbital sanders

Hand-held portable power tools - Measurement ofvibrations at the handle Part 9: Rammers

Hand-held portable power tools - Measurement ofvibrations at the handle Part 10: Nibblers and shears

Hand-held portable power tools - Measurement ofvibrations at the handle Part 11: Fastener drivingtools

Hand-held portable power tools - Measurement ofvibrations at the handle Part 12: Saws and files withreciprocating action and saws with oscillating orrotating action

Hand-held portable power tools - Measurement ofvibrations at the handle Part 13: Die grinders

Hand-held portable power tools - Measurement ofvibrations at the handle Part 14: Stone-working toolsand needle scalers

Small craft - Marine propulsion reciprocating internalcombustion engines - Power measurements anddeclarations

Small craft - Principal data

Cranes - Design principles for loads and loadcombinations Part 1: General

Cranes - Design principles for loads and loadcombinations Part 3: Tower cranes

Cranes - Design principles for loads and loadcombinations Part 5: Overhead travelling and portalbridge cranes

Assembly tools for screws and nuts - Screwdriversfor cross-recessed head screws Part 1: Driver tips

Assembly tools for screws and nuts - Screwdriversfor cross-recessed head screws Part 2: Generalrequirements, lengths of blades and marking ofhand-operated screwdrivers

Plastics piping systems for soil and waste discharge(low and high temperature) inside buildings -Polyethylene (PE)

Plastics piping systems for non-pressureunderground drainage and sewerage -Polypropylene (PP)

Information technology - ASN.1 encoding rules:Specification of Basic Encoding Rules (BER),Canonical Encoding Rules (CER) and DistinguishedEncoding Rules (DER)

Title

SANS 8662-7:2003/ISO 8662-7:1997, IDT, Ed. 1

SANS 8662-8:2003/ISO 8662-8:1997, IDT, Ed. 1

SANS 8662-9:2003/ISO 8662-9:1996, IDT, Ed. 1

SANS 8662-10:2003/ISO 8662-10:1998, IDT, Ed. 1

SANS 8662-11:2003/ISO 8662-11:1999, IDT, Ed. 1

SANS 8662-12:2003/ISO 8662-12:1997, IDT, Ed. 1

SANS 8662-13:2003/ISO 8662-13:1997, IDT, Ed. 1

SANS 8662-14:2003/ISO 8662-14:1996, IDT, Ed. 1

SANS 8665:2008/ISO 8665:2006, IDT, Ed. 3

SANS 8666:2008/ISO 8666:2002, IDT, Ed. 1

SANS 8686-1:2009/ISO 8686-1:1989, IDT, Ed. 1

SANS 8686-3:2007/ISO 8686-3:1998, IDT, Ed. 1

SANS 8686-5:2003/ISO 8686-5:1992, IDT, Ed. 1

SANS 8764-1:2009/ISO 8764-1:2004, IDT, Ed. 3

SANS 8764-2:2009/ISO 8764-2:2004, IDT, Ed. 2

SANS 8770:2008/ISO 8770:2003, IDT, Ed. 2

SANS 8773:2007/ISO 8773:2006, IDT, Ed. 2


SANS Number


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

3

4

2

2

Edition

Information technology - ASN.1 encoding rules:Specification of Packed Encoding Rules (PER)

Information technology - ASN.1 encoding rules:Specification of Encoding Control Notation (ECN)

Information technology - ASN.1 encoding rules: XMLEncoding Rules (XER)

Information technology - ASN.1 encoding rules:Mapping W3C XML schema definitions into ASN.1

Technical drawings - Rolling bearings Part 1:General simplified representation

Magnetite for use in coal preparation - Test methods

Small craft with inboard engine - Propeller shaftends and bosses with 1:16 taper

Small craft - Electrical devices - Protection againstignition of surrounding flammable gases

Small craft - Steering gear - Cable and pulleysystems

Small craft - Remote steering systems

Small craft - Electrically operated direct-current bilgepumps

Microbiology - General guidance for the detection ofVibrio parahaemolyticus

Milk - Determination of nitrogen content Part 1:Kjeldahl method

Milk - Determination of nitrogen content Part 2:Block-digestion method (Macro method)

Milk - Determination of nitrogen content Part 4:Determination of non-protein-nitrogen content

Milk - Determination of nitrogen content - Part 5:Determination of protein-nitrogen content

Quality management systems - Fundamentals andvocabulary

Quality management systems - Requirements

Quality management systems - Guidelines forperformance improvements

Thermal cutting - Classification of thermal cuts -Geometrical product specification and qualitytolerances

Title





SANS 8826-1:2005/ISO 8826-1:1989, IDT, Ed. 1

SANS 8833:1989/ISO 8833:1989, IDT

SANS 8845:2008/ISO 8845:1994, IDT, Ed. 1

SANS 8846:2008/ISO 8846:1990, IDT, Ed. 1

SANS 8847:2008/ISO 8847:2004, IDT, Ed. 2

SANS 8848:2008/ISO 8848:1990, IDT, Ed. 1

SANS 8849:2008/ISO 8849:2003, IDT, Ed. 2

SANS 8914:1990/ISO 8914:1990, IDT, Ed. 1

SANS 8968-1:2006/ISO 8968-1 IDF 20-1:2001, IDT,Ed. 1




SANS 9000:2005/ISO 9000:2005, IDT, Ed. 3

SANS 9001:2008/ISO 9001:2008, IDT, Ed. 4

SANS 9004:2000/ISO 9004:2000, IDT, Ed. 2

SANS 9013:2006/ISO 9013:2002, IDT, Ed. 2

SANS Number

(SABS ISO 8833)

(SABS ISO 8914)

(SABS ISO 9000)

(SABS ISO 9001)

(SABS ISO 9004)

(SABS ISO 9013)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Building construction - Jointing products -Determination of extrudability of sealants usingstandardized apparatus

Plastics piping and ducting systems - Determinationof the long-term hydrostatic strength ofthermoplastics materials in pipe form byextrapolation

Gas tightness of equipment for gas welding andallied processes

Small craft - Seacocks and through-hull fittings Part1: Metallic

Small craft - Seacocks and through-hull fittings Part2: Non-metallic

Small craft - Fire protection Part 1: Craft with a hulllength of up to and including 15 m

Small craft - Fire protection Part 2: Craft with a hulllength of over 15 m

Small craft - Electric fans

Paints and varnishes - Determination of through-drystate and through-dry time - Method of test

Software engineering - Product quality Part 1:Quality model

Software engineering - Product quality Part 2:External metrics

Software engineering - Product quality Part 3:Internal metrics

Software engineering - Product quality Part 4:Quality in use metrics

Information processing systems - Userdocumentation and cover information for consumersoftware packages

Pig-irons - Definition and classification

Mechanical pencils Part 1: Classification,dimensions, performance requirements and testing

Mechanical pencils Part 2: Black leads -Classification and dimensions

Mechanical pencils Part 3: Black leads - Bendingstrengths of HB leads

Black leads for wood-cased pencils - Classificationand diameters

Title

SANS 9048:1987/ISO 9048:1987, IDT, Ed. 1

SANS 9080:2004/ISO 9080:2003, IDT, Ed. 1

SANS 9090:1989/ISO 9090:1989, IDT, Ed. 1

SANS 9093-1:2008/ISO 9093-1:1994, IDT, Ed. 1

SANS 9093-2:2008/ISO 9093-2:2002, IDT, Ed. 1

SANS 9094-1:2008/ISO 9094-1:2003, IDT, Ed. 1

SANS 9094-2:2008/ISO 9094-2:2002, IDT, Ed. 1

SANS 9097:2008/ISO 9097:1991, IDT, Ed. 1

SANS 9117:1990/ISO 9117:1990, IDT, Ed. 1


SANS 9126-2:2004/ISO/IEC TR 9126-2:2003, IDT,Ed. 1



SANS 9127:1988/ISO 9127:1988, IDT, Ed. 1

SANS 9147:1987/ISO 9147:1987, IDT, Ed. 1

SANS 9177-1:1989/ISO 9177-1:1989, IDT, Ed. 1

SANS 9177-2:1989/ISO 9177-2:1989, IDT, Ed. 1

SANS 9177-3:2009/ISO 9177-3:1994, IDT, Ed. 1

SANS 9180:2009/ISO 9180:1988, IDT, Ed. 1

SANS Number

(SABS ISO 9048)

(SABS ISO 9090)

(SABS ISO 9117)

(SABS ISO 9127)

(SABS ISO 9147)

(SABS ISO 9177-1)

(SABS ISO 9177-2)


October 2009

1

1

2

1

1

2

1

1

1

1

1

1

2

1

1

1

1

1

Edition

Injection equipment for medical use Part 1:Ampoules for injectables

Technical drawings - Seals for dynamic applicationPart 1: General simplified representation

Corrosion tests in artificial atmospheres - Salt spraytests

Information and documentation - Determination ofprice indexes for print and electronic mediapurchased by libraries

Rubber and rubber products - Determination ofprecision for test method standards

Information technology - Guidelines for themanagement of software documentation

Water quality - Determination of chloride - Silvernitrate titration with chromate indicator (Mohr'smethod)

Water quality - Detection and enumeration ofEscherichia coli and coliform bacteria Part 1:Membrane filtration method

Water quality - Detection and enumeration ofcoliform organisms, thermotolerant coliformorganisms and presumptive Escherichia coli Part 2:Multiple tube (most probable number) method

Water quality - Detection and enumeration ofEscherichia coli and coliform bacteria Part 3:Miniaturized method (Most Probable Number) for thedetection and enumeration of E. coli in surface andwaste water

Resistance welding equipment - Insulated pins foruse in electrode back-ups

Resistance spot welding equipment - Cooling tubes

Continuous hot-dip aluminium/zinc-coated steelsheet of commercial, drawing and structural qualities

Cranes and related equipment - Accuracyrequirements for measuring parameters duringtesting

Cranes - Information to be provided Part 1: General

Cranes - Information to be provided for enquiries,orders, offers and supply Part 3: Tower cranes

Water quality - Evaluation of ultimate aerobicbiodegradability of organic compounds in aqueousmedium by determination of oxygen demand in aclosed respirometer

Soft soldering fluxes - Classification andrequirements Part 1: Classification, labelling andpackaging

Title

SANS 9187-1:2007/ISO 9187-1:2006, IDT, Ed. 3

SANS 9222-1:2006/ISO 9222-1:1989, IDT, Ed. 1

SANS 9227:2007/ISO 9227:2006, IDT, Ed. 2

SANS 9230:2009/ISO 9230:2007, IDT, Ed. 2

SANS 9272:2003/ISO/TR 9272:1986, IDT, Ed. 1

SANS 9294:2007/ISO/IEC TR 9294:2005, IDT, Ed. 2

SANS 9297:2007

SANS 9308-1:2004/ISO 9308-1:2000, IDT, Ed. 2

SANS 9308-2:2004/ISO 9308-2:1990, IDT, Ed. 1

SANS 9308-3:2004/ISO 9308-3:1998, IDT, Ed. 1

SANS 9312:1990/ISO 9312:1990, IDT, Ed. 1

SANS 9313:1989/ISO 9313:1989, IDT, Ed. 1

SANS 9364:2007/ISO 9364:2006, IDT, Ed. 3

SANS 9373:2007/ISO 9373:1989, IDT, Ed. 1

SANS 9374-1:2002/ISO 9374-1:1989, IDT, Ed. 1

SANS 9374-3:2007/ISO 9374-3:2002, IDT, Ed. 1

SANS 9408:1999/ISO 9408:1999, IDT, Ed. 2

SANS 9454-1:1990/ISO 9454-1:1990, IDT, Ed. 1

SANS Number

(SABS ISO 9227)

(SABS ISO/IEC TR 9294)

(SABS ISO 9312)

(SABS ISO 9313)

(SABS ISO 9364)

(SABS ISO 9408)

(SABS ISO 9454-1)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

2

1

Edition

Soft soldering fluxes - Classification andrequirements Part 2: Performance requirements

Soft soldering fluxes - Test methods Part 1:Determination of non-volatile matter, gravimetricmethod

Soft soldering fluxes - Test methods Part 2:Determination of non-volatile matter, ebulliometricmethod

Soft soldering fluxes - Test methods Part 3:Determination of acid value, potentiometric andvisual titration methods

Soft soldering fluxes - Test methods Part 5: Coppermirror test

Soft soldering fluxes - Test methods Part 6:Determination and detection of halide (excludingfluoride) content

Soft soldering fluxes - Test methods Part 8:Determination of zinc content

Soft soldering fluxes - Test methods Part 9:Determination of ammonia content

Soft soldering fluxes - Test methods Part 10: Fluxefficacy tests, solder spread method

Soft soldering fluxes - Test methods Part 11:Solubility of flux residues

Soft soldering fluxes - Test methods Part 12: Steeltube corrosion test

Soft soldering fluxes - Test methods Part 13:Determination of flux splattering

Soft soldering fluxes - Test methods Part 14:Assessment of tackiness of flux residues

Soft soldering fluxes - Test methods Part 15: Coppercorrosion test

Soft soldering fluxes - Test methods Part 16: Fluxefficacy tests, wetting balance method

Soft soldering fluxes - Test methods Part 17:Surface insulation resistance comb test andelectrochemical migration test of flux residues

Materials for equipment used in gas welding, cuttingand allied processes

Approval testing of welders - Fusion welding Part 1:Steels

Qualification test of welders - Fusion welding Part 2:Aluminium and aluminium alloys

Acoustics - Determination of sound power levels ofnoise sources using sound intensity Part 1:Measurement at discrete points

Title

SANS 9454-2:1998/ISO 9454-2:1998, IDT, Ed. 1

SANS 9455-1:1990/ISO 9455-1:1990, IDT, Ed. 1

SANS 9455-2:1993/ISO 9455-2:1993, IDT, Ed. 1

SANS 9455-3:1992/ISO 9455-3:1992, IDT, Ed. 1

SANS 9455-5:1992/ISO 9455-5:1992, IDT, Ed. 1

SANS 9455-6:1995/ISO 9455-6:1995, IDT, Ed. 1

SANS 9455-8:1991/ISO 9455-8:1991, IDT, Ed. 1

SANS 9455-9:1993/ISO 9455-9:1993, IDT, Ed. 1

SANS 9455-10:1998/ISO 9455-10:1998, IDT, Ed. 1

SANS 9455-11:1991/ISO 9455-11:1991, IDT, Ed. 1

SANS 9455-12:1992/ISO 9455-12:1992, IDT, Ed. 1

SANS 9455-13:1996/ISO 9455-13:1996, IDT, Ed. 1

SANS 9455-14:1991/ISO 9455-14:1991, IDT, Ed. 1

SANS 9455-15:1996/ISO 9455-15:1996, IDT, Ed. 1

SANS 9455-16:1998/ISO 9455-16:1998, IDT, Ed. 1

SANS 9455-17:2009/ISO 9455-17:2002, IDT, Ed. 1

SANS 9539:1988/ISO 9539:1988, IDT, Ed. 1

SANS 9606-1:1994/ISO 9606-1:1994, IDT, Ed. 1

SANS 9606-2:2006/ISO 9606-2:2004, IDT, Ed. 2

SANS 9614-1:1993/ISO 9614-1:1993, IDT, Ed. 1

SANS Number

(SABS ISO 9454-2)

(SABS ISO 9455-1)

(SABS ISO 9455-2)

(SABS ISO 9455-3)

(SABS ISO 9455-5)

(SABS ISO 9455-6)

(SABS ISO 9455-8)

(SABS ISO 9455-9)

(SABS ISO 9455-10)

(SABS ISO 9455-11)

(SABS ISO 9455-12)

(SABS ISO 9455-13)

(SABS ISO 9455-14)

(SABS ISO 9455-15)

(SABS ISO 9455-16)

(SABS ISO 9539)

(SABS ISO 9606-1)

(SABS ISO 9606-2)

(SABS ISO 9614-1)


October 2009

1

1

1

2

1

1

1

1

1

1

2

1

1

1

1

1

1

1

1

Edition

Acoustics - Determination of sound power levels ofnoise sources using sound intensity Part 2:Measurement by scanning

Acoustics - Determination of sound power levels ofnoise sources using sound intensity Part 3:Precision method for measurement by scanning

Whole milk - Determination of milkfat, protein andlactose content - Guidance on the operation of mid-infrared instruments

Rolling bearings - Insert bearings and eccentriclocking collars - Boundary dimensions andtolerances

Welding and allied processes - Recommendationsfor joint preparation Part 1: Manual metal-arcwelding, gas-shielded metal-arc welding, gaswelding, TIG welding and beam welding of steels

Welding and allied processes - Joint preparationPart 2: Submerged arc welding of steels

Welding and allied processes - Recommendationsfor joint preparation Part 3: Metal inert gas weldingand tungsten inert gas welding of aluminium and itsalloys

Welding and allied processes - Recommendationsfor joint preparation Part 4: Clad steels

Information and documentation - Paper fordocuments - Requirements for permanence

Information and documentation - Statistics on theproduction and distribution of books, newspapers,periodicals and electronic publications

Non-destructive testing - Qualification andcertification of personnel

Small craft - Remote steering systems for singleoutboard motors of 15 kW to 40 kW power

Information technology - Security techniques -Digital signature schemes giving message recoveryPart 2: Integer factorization based mechanisms

Information technology - Security techniques -Digital signature schemes giving message recoveryPart 3: Discrete logarithm based mechanisms

Information technology - Security techniques -Message Authentication Codes (MACs) Part 1:Mechanisms using a block cipher

Information technology - Security techniques -Message Authentication Codes (MACs) Part 2:Mechanisms using a dedicated hash-function

Information technology - Security techniques - Entityauthentication Part 1: General

Information technology - Security techniques - Entityauthentication Part 2: Mechanisms using symmetricencipherment algorithms

Information technology - Security techniques - Entityauthentication Part 3: Mechanisms using digitalsignature techniques

Title

SANS 9614-2:1996/ISO 9614-2:1996, IDT, Ed. 1

SANS 9614-3:2005/ISO 9614-3:2002, IDT, Ed. 1

SANS 9622:2005/ISO 9622:1999, IDT, Ed. 1

SANS 9628:2007/ISO 9628:2006, IDT, Ed. 2

SANS 9692-1:2007/ISO 9692-1:2003, IDT, Ed. 1

SANS 9692-2:2009/ISO 9692-2:1998, IDT, Ed. 1

SANS 9692-3:2009/ISO 9692-3:2000, IDT, Ed. 1

SANS 9692-4:2009/ISO 9692-4:2003, IDT, Ed. 1

SANS 9706:2006/ISO 9706:1994, IDT, Ed. 1

SANS 9707:2009/ISO 9707:2008, IDT, Ed. 2

SANS 9712:2009/ISO 9712:2005, IDT, Ed. 3

SANS 9775:2008/ISO 9775:1990, IDT, Ed. 1








SANS Number

(SABS ISO 9614-2)

(SABS ISO 9712)


October 2009

1

2

1

1

1

1

2

1

1

1

1

1

1

1

1

1

1

1

Edition

Information technology - Security techniques - Entityauthentication Part 4: Mechanisms using acryptographic check function

Information technology - Security techniques - Entityauthentication Part 5: Mechanisms using zero-knowledge techniques

Information technology - Security techniques - Entityauthentication Part 6: Mechanisms using manualdata transfer

Gas cylinders - Refillable seamless steel gascylinders - Design, construction and testing Part 1:Quenched and tempered steel cylinders with tensilestrength less than 1 100 MPa

Gas cylinders - Refillable seamless steel gascylinders - Design, construction and testing Part 2:Quenched and tempered steel cylinders with tensilestrength greater than or equal to 1 100 MPa

Gas cylinders - Refillable seamless steel gascylinders - Design, construction and testing Part 3:Normalized steel cylinders

Unplasticized poly(vinyl chloride) (PVC-U) pipes -Dichloromethane resistance at specifiedtemperature (DCMT) - Test method

Thermoplastics pipes for the transport of fluids -Determination of pendulum impact strength by theCharpy method Part 1: General test method

Thermoplastics pipes for the transport of fluids -Determination of pendulum impact strength by theCharpy method Part 2: Test conditions for pipes ofvarious materials

Textiles - Effect of dry heat on fabrics under lowpressure Part 1: Procedure for dry-heat treatment offabrics

Textiles - Effect of dry heat on fabrics under lowpressure Part 2: Determination of dimensionalchange in fabrics exposed to dry heat

Cranes - Training of drivers Part 1: General

Cranes - Training of drivers Part 3: Tower cranes

Cranes - Crane driving manual Part 1: General

Coal - Sampling of pulverized coal conveyed bygases in direct fired coal systems

Products in fibre-reinforced cement - Longcorrugated or asymmetrical section sheets andfittings for roofing and cladding

Non-destructive testing - Magnetic particle testingPart 1: General principles

Cranes - Information labels Part 3: Tower cranes

Title




SANS 9809-1:1999/ISO 9809-1:1999, IDT, Ed. 1

SANS 9809-2:2000/ISO 9809-2:2000, IDT, Ed. 1

SANS 9809-3:2000/ISO 9809-3:2000, IDT, Ed. 1

SANS 9852:2008/ISO 9852:2007, IDT, Ed. 2

SANS 9854-1:1994/ISO 9854-1:1994, IDT, Ed. 1

SANS 9854-2:1994/ISO 9854-2:1994, IDT, Ed. 1

SANS 9866-1:2003/ISO 9866-1:1991, IDT, Ed. 1

SANS 9866-2:2003/ISO 9866-2:1991, IDT, Ed. 1

SANS 9926-1:2006/ISO 9926-1:1990, IDT, Ed. 1

SANS 9926-3:2007/ISO 9926-3:2005, IDT, Ed. 1

SANS 9928-1:2006/ISO 9928-1:1990, IDT, Ed. 1

SANS 9931:1991/ISO 9931:1991, IDT, Ed. 1

SANS 9933:1995/ISO 9933:1995, IDT, Ed. 1

SANS 9934-1:2004/ISO 9934-1:2001, IDT, Ed. 1

SANS 9942-3:2007/ISO 9942-3:1999, IDT, Ed. 1

SANS Number

(SABS ISO 9809-1)

(SABS ISO 9809-2)

(SABS ISO 9809-3)

(SABS ISO 9852)

(SABS ISO 9854-1)

(SABS ISO 9854-2)

(SABS ISO 9931)

(SABS ISO 9933)


October 2009

1

3

1

1

1

1

4

7.01

3.01

1

4.01

4

4

3

2

1

1

6

3.02

Edition

Financial transaction cards - Messages between theintegrated circuit card and the card accepting devicePart 2: Functions, messages (commands andresponses), data elements and structures

Lighters - Safety specification

Water quality - Practices for evaluating andcontrolling microbiological colony count media usedin water quality tests

Quality management - Customer satisfaction -Guidelines for codes of conduct for organizations

Quality management - Customer satisfaction -Guidelines for complaints handling in organizations

Quality management - Customer satisfaction -Guidelines for dispute resolution external toorganizations

Terms and definitions for textiles and textilemerchandise

The preservative treatment of timber

Colour marking and identification of medical gascylinders and anaesthetic apparatus

Quality management systems - Guidelines forconfiguration management

Care-labelling of textile piece-goods, textile articlesand clothing

The use of light metals in hazardous locations atmines

The determination of performance (at net power) ofinternal combustion engines Part 1: Road vehicleinternal combustion engines at sea level

The determination of performance (at net power) ofinternal combustion engines Part 2: Compressionignition engines at altitude

The determination of performance (at net power) ofinternal combustion engines Part 3: Agriculturalvehicle internal combustion engines at sea level

Quality management - Guidelines for realizingfinancial and economic benefits

Quality management - Guidelines for training

Transportable containers for compressed, dissolvedand liquefied gases - Basic design, manufacture,use and maintenance

The waterproofing of buildings (including damp-proofing and vapour barrier installation)

Title

SANS 9992-2:1998/ISO 9992-2:1998, IDT, Ed. 1

SANS 9994:2008/ISO 9994:2005, IDT, Ed. 4

SANS 9998:2004/ISO 9998:1991, IDT, Ed. 1

SANS 10001:2008/ISO 10001:2007, IDT, Ed. 1

SANS 10002:2005/ISO 10002:2004, IDT, Ed. 1

SANS 10003:2008/ISO 10003:2007, IDT, Ed. 1

SANS 10004:2005

SANS 10005:2006

SANS 10006:2006

SANS 10007:2004/ISO 10007:2003, IDT, Ed. 2

SANS 10011:2007

SANS 10012:2004

SANS 10013-1:2006/ECE R24:1986, NEQ; ISO1585:1982, NEQ

SANS 10013-2:2006

SANS 10013-3:2006/ECE R24:1986, NEQ

SANS 10014:2006/ISO 10014:2006, IDT, Ed. 1

SANS 10015:1999/ISO 10015:1999, IDT, Ed. 1

SANS 10019:2008

SANS 10021:2006

SANS Number

(SABS ISO 9992-2)

(SABS ISO 9994)

(SABS 04)

(SABS 05)

(SABS 06)

(SABS 011)

(SABS 012)

(SABS 013-1)

(SABS 013-2)

(SABS 013-3)

(SABS ISO 10015)

(SABS 019)

(SABS 021)


October 2009

2

2

2

4.01

3

3

5.01

2

3

1.02

1

1

1

1

3.03

1.01

2.02

3

3

Edition

Rubber, vulcanized or thermoplastic - Determinationof tear strength Part 1: Trouser, angle and crescenttest pieces

Rubber, vulcanized or thermoplastic - Determinationof tear strength Part 2: Small (Delft) test pieces

Rubber, vulcanized or thermoplastic - Determinationof tensile stress-strain properties

The installation of wood and laminate flooring

Welding Part 1: Glossary of terms

Welding Part 2: Symbols

The testing of motor vehicles for roadworthiness

Rubber, vulcanized or thermoplastic - Determinationof hardness (hardness between 10 IRHD and 100IRHD)

Food hygiene management

The construction of strongrooms

ISO 9001: 2000 Process auditing Part 1: Conceptsand application

ISO 9001:2000 Process auditing Part 2: ISO 9001Process capability model and compliance indicators

ISO 9001: 2000 Process auditing Part 3: Genericprocess performance model and work products

ISO 9001: 2000 Process auditing Part 4: Processperformance model and work products forinformation technology

The installation of communal and single antennasystems for the reception of television and soundbroadcast transmissions Part 1: VHF and UHFtelevision and VHF sound antenna systems

The installation of communal and single antennasystems for the reception of television and soundbroadcast transmissions Part 2: Satellite antennasystems

Fixing of concrete interlocking roofing tiles

The preparation of steel surfaces for coating

Application of thermal process control to low-acidfish canning factories

Title

SANS 10034-1:2009/ISO 34-1:2004, IDT, Ed. 2

SANS 10034-2:2009/ISO 34-2:2007, IDT, Ed. 2

SANS 10037:2009/ISO 37:2005, IDT, Ed. 4

SANS 10043:2009

SANS 10044-1:2004

SANS 10044-2:2004

SANS 10047:2007

SANS 10048:2009/ISO 48:2007, IDT, Ed. 4

SANS 10049:2001

SANS 10052:2007

SANS 10055-1:2003

SANS 10055-2:2003

SANS 10055-3:2003

SANS 10055-4:2003

SANS 10061-1:2008

SANS 10061-2:2008

SANS 10062:2003

SANS 10064:2005

SANS 10066:2007

SANS Number

(SABS 043)

(SABS 044-1)

(SABS 044-2)

(SABS 047)

(SABS 049)

(SABS 052)

(SABS 061-1)

(SABS 061-2)

(SABS 062)

(SABS 064)

(SABS 066)


October 2009

3.02

2

4

2

2

2

2

2

2

2.01

2.02

4

5

1.01

3.03

1

1.01

5

Edition

The installation of resilient thermoplastic and similarflexible floor covering materials

The safe application of masonry-type facings tobuildings

The assessment of defects in textile piece-goodsand made-up articles Part 1: Defects in wovenpiece-goods (cellulosic and cellulosic blends)

The assessment of defects in textile piece-goodsand made-up articles Part 2: Defects in woven terrytowelling

The assessment of defects in textile piece-goodsand made-up articles Part 3: Defects in woven ducks

The assessment of defects in textile piece-goodsand made-up articles Part 4: Defects in knittedpiece-goods

The assessment of defects in textile piece-goodsand made-up articles Part 5: Defects in wovenwoollen and worsted piece-goods

The assessment of defects in textile piece-goodsand made-up articles Part 6: Defects in wovenfilament piece-goods

The assessment of defects in textile piece-goodsand made-up articles Part 7: Defects in householdarticles

The use, care and protection of grinding wheels

The rodentproofing of buildings

Timber frame buildings

The measurement and assessment of occupationalnoise for hearing conservation purposes

The design, erection, use and inspection of accessscaffolding Part 1: Steel access scaffolding

The installation, inspection and maintenance ofequipment used in explosive atmospheres Part 1:Installations including surface installations on mines

The installation, inspection and maintenance ofequipment used in explosive atmospheres Part 2:Electrical apparatus installed underground in mines

The installation, inspection and maintenance ofequipment used in explosive atmospheres Part 3:Repair and overhaul of apparatus used in explosiveatmospheres

The handling, storage, distribution and maintenanceof liquefied petroleum gas in domestic, commercial,and industrial installations Part 1: Liquefiedpetroleum gas installations involving gas storagecontainers of individual water capacity not exceeding500 L and a combined water capacity not exceeding3 000 L per installation

Title

SANS 10070:2007

SANS 10073:1974

SANS 10076-1:2004

SANS 10076-2:2004

SANS 10076-3:2004

SANS 10076-4:2004

SANS 10076-5:2004

SANS 10076-6:2004

SANS 10076-7:2004

SANS 10079:2008

SANS 10080:2009

SANS 10082:2007

SANS 10083:2004

SANS 10085-1:2004

SANS 10086-1:2003

SANS 10086-2:2006

SANS 10086-3:2001

SANS 10087-1:2008

SANS Number

(SABS 070)

(SABS 073)

(SABS 076-1)

(SABS 076-2)

(SABS 076-3)

(SABS 076-4)

(SABS 076-5)

(SABS 076-6)

(SABS 076-7)

(SABS 079)

(SABS 080)

(SABS 082)

(SABS 083)

(SABS 086-1)

(SABS 086-3)

(SABS 087-1)


October 2009

2

4

2

4.01

3

1

1.01

4.03

3

3

3

2.03

3

4

2.04

Edition

The handling, storage, and distribution of liquefiedpetroleum gas in domestic, commercial, andindustrial installations Part 2: Installations in mobileunits and small non-permanent buildings

The handling, storage, distribution and maintenanceof liquefied petroleum gas in domestic, commercial,and industrial installations Part 3: Liquefiedpetroleum gas installations involving storage vesselsof individual water capacity exceeding 500 L

The handling, storage, and distribution of liquefiedpetroleum gas in domestic, commercial, andindustrial installations Part 4: Transportation of LPGin bulk by road

The handling, storage, distribution and maintenanceof liquefied petroleum gas in domestic, commercial,and industrial installations Part 6: The application ofliquefied petroleum and compressed natural gasesas engine fuels for internal combustion engines

The handling, storage, distribution and maintenanceof liquefied petroleum gas in domestic, commercial,and industrial installations Part 7: Storage and fillingpremises for refillable liquefied petroleum gas (LPG)containers of gas capacity not exceeding 9 kg andthe storage of individual gas containers notexceeding 48 kg.

The handling, storage, and distribution of liquefiedpetroleum gas in domestic, commercial, andindustrial installations Part 8: The fuelling of fork lifttrucks and other LP gas operated vehicles

The handling, storage, distribution and maintenanceof liquefied petroleum gas in domestic, commercialand industrial installations Part 10: Mobile fillingstations for refillable liquefied petroleum gas (LPG)containers of capacity not exceeding 9 kg

The petroleum industry Part 1: Storage anddistribution of petroleum products in above-groundbulk installations

The petroleum industry - Part 2: Electrical and otherinstallations in the distribution and marketing sector

The petroleum industry Part 3: The installation ofunderground storage tanks, pumps/dispensers andpipework at service stations and consumerinstallations

Community protection against fire

The safe working of power-driven woodworkingmachinery

Caravan parks

The use of high-strength friction-grip bolts

The manufacture of finger-jointed structural timber

Title

SANS 10087-2:1977

SANS 10087-3:2008

SANS 10087-4:1979

SANS 10087-6:2006

SANS 10087-7:2007

SANS 10087-8:1976

SANS 10087-10:2006

SANS 10089-1:2008

SANS 10089-2:2007

SANS 10089-3:1999

SANS 10090:2003

SANS 10091:2009

SANS 10092:2004

SANS 10094:2005

SANS 10096:2008

SANS Number

(SABS 087-2)

(SABS 087-3)

(SABS 087-4)

(SABS 087-6)

(SABS 087-7)

(SABS 087-8)

(SABS 087-10)

(SABS 089-1)

(SABS 089-2)

(SABS 089-3)

(SABS 090)

(SABS 091)

(SABS 092)

(SABS 094)

(SABS 096)


October 2009

3.03

2

2.02

2

1.01

2.01

2

6

2

3

3

3

2

5

3

3

3.01

2

1

Edition

Public lighting Part 1: The lighting of publicthoroughfares

Public lighting Part 2: The lighting of certain specificareas of streets and highways

The structural use of concrete Part 1: Design

The structural use of concrete Part 2: Materials andexecution of work

Standard nomenclature for stitches, seams, andstitchings

The selection of pipes for buried pipelines Part 1:General provisions

Selection of pipes for buried pipelines Part 2: Rigidpipes

The measurement and rating of environmental noisewith respect to annoyance and to speechcommunication

Handrailing and balustrading (safety aspects)

The use and control of fire-fighting equipment Part1: Portable and wheeled (mobile) fire extinguishers

The use and control of fire-fighting equipment Part2: Fire hose reels, hydrants and booster connections

The installation, maintenance, repair andreplacement of domestic solar water heatingsystems

The design and installation of ceramic tiling

The classification of hazardous locations and theselection of apparatus for use in such locations

Concrete floors Part 1: Bases to concrete floors

Concrete floors Part 2: Finishes to concrete floors

Engineering drawing Part 1: General principles

Engineering drawing Part 2: Geometrical tolerancingSection 1: Tolerancing of form, orientation, locationand run-out - Generalities, definitions, symbols,indications on drawings

Engineering drawing Part 2: Geometrical tolerancingSection 2: Datums and datum-systems forgeometrical tolerances

Title

SANS 10098-1:2007

SANS 10098-2:2005

SANS 10100-1:2000

SANS 10100-2:1992

SANS 10101:2008

SANS 10102-1:2005

SANS 10102-2:1987

SANS 10103:2008

SANS 10104:1991

SANS 10105-1:2005

SANS 10105-2:2005

SANS 10106:2006

SANS 10107:1996

SANS 10108:2005

SANS 10109-1:2009

SANS 10109-2:2004

SANS 10111-1:1993

SANS 10111-2-1:2007/ISO 1101:2004, IDT, Ed. 2

SANS 10111-2-2:1993/ISO 5459:1981, IDT, Ed. 1

SANS Number

(SABS 098-1)

(SABS 098-2)

(SABS 0100-1)

(SABS 0100-2)

(SABS 0101)

(SABS 0102-1)

(SABS 0102-2)

(SABS 0103)

(SABS 0104)

(SABS 0105-1)

(SABS 0105-2)

(SABS 0106)

(SABS 0107)

(SABS 0108)

(SABS 0109-1)

(SABS 0109-2)

(SABS 0111-1)

(SABS 0111-2-1)

(SABS 0111-2-2)


October 2009

2

2

1

1

2.01

3

1.02

2.02

3

2.01

3

3

2

3

2

2

3

Edition

Geometrical product specifications (GPS) -Geometrical tolerancing - Maximum materialrequirement (MMR), least material requirement(LMR) and reciprocity requirement (RPR)

Geometrical Product Specifications (GPS) -Geometrical tolerancing - Positional tolerancing

Engineering drawing Part 2: Geometrical tolerancingSection 5: Fundamental tolerancing principle

Engineering drawing Part 3: Guidelines for theinterpretation and verification methods ofgeometrical tolerancing

The installation of polyethylene and poly(vinylchloride)(PVC-U and PVC-M) pipes

Interior lighting Part 1: Artificial lighting of interiors

Interior lighting Part 2: Emergency lighting

Calculation and prediction of aircraft noise aroundairports for land use purposes

The aerial application of pesticides

Reduction of explosion hazards presented byelectrical equipment - Segregation, ventilation andpressurization

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 1: Format and contents

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specification,Introduction

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection A: General

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection AA: General (small works)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection AB: Engineer's office

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection AD: General (small dams)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection AH: General (structural)

Title

SANS 10111-2-3:2008/ISO 2692:2006, IDT, Ed. 2

SANS 10111-2-4:2005/ISO 5458:1998, IDT, Ed. 2

SANS 10111-2-5:1993/ISO 8015:1985, IDT, Ed. 1

SANS 10111-3:1993/ISO/TR 5460:1985, MOD, Ed. 1

SANS 10112:2003

SANS 10114-1:2005

SANS 10114-2:2009

SANS 10117:2008

SANS 10118:2009

SANS 10119:2001

SANS 10120-1:1986

SANS 10120-2 INTRO:1986

SANS 10120-2 A:1986

SANS 10120-2 AA:1986

SANS 10120-2 AB:1986

SANS 10120-2 AD:1986

SANS 10120-2 AH:1986

SANS Number

(SABS 0111-2-3)

(SABS 0111-2-4)

(SABS 0111-2-5)

(SABS 0111-3)

(SABS 0112)

(SABS 0114-1)

(SABS 0114-2)

(SABS 0117)

(SABS 0118)

(SABS 0119)

(SABS 0120-1)

(SABS 0120-2 INTRO)

(SABS 0120-2 A)

(SABS 0120-2 AA)

(SABS 0120-2 AB)

(SABS 0120-2 AD)

(SABS 0120-2 AH)


October 2009

2

2

2

2

1

2

1

2

1

2

2

1

1

1

Edition

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection C: Site clearance

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection D: Earthworks

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection DA: Earthworks (small works)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection DB: Earthworks (pipe trenches)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection DE: Small earth dams

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection DK: Gabions and pitching

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection DM: Earthworks (roads, subgrade)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection DN: Earthworks (railway sidings)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection F: Piling

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection G: Concrete (structural)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection GA: Concrete (small works)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection GB: Concrete (ordinary buildings)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection GE: Precast concrete (structural)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection GF: Prestressed concrete

Title

SANS 10120-2 C:1982

SANS 10120-2 D:1982

SANS 10120-2 DA:1982

SANS 10120-2 DB:1982

SANS 10120-2 DE:1984

SANS 10120-2 DK:1996

SANS 10120-2 DM:1981

SANS 10120-2 DN:1982

SANS 10120-2 F:1983

SANS 10120-2 G:1982

SANS 10120-2 GA:1982

SANS 10120-2 GB:1984

SANS 10120-2 GE:1984

SANS 10120-2 GF:1984

SANS Number

(SABS 0120-2 C)

(SABS 0120-2 D)

(SABS 0120-2 DA)

(SABS 0120-2 DB)

(SABS 0120-2 DE)

(SABS 0120-2 DK)

(SABS 0120-2 DM)

(SABS 0120-2 DN)

(SABS 0120-2 F)

(SABS 0120-2 G)

(SABS 0120-2 GA)

(SABS 0120-2 GB)

(SABS 0120-2 GE)

(SABS 0120-2 GF)


October 2009

3

2

1

1

1

2

2

1

2

2

1

1

2

1

Edition

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specification H:Structural steelwork

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specification HA:Structural steelwork (sundry items)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection HB: Cladding and sheeting

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection HC: Corrosion protection of structuralsteelwork

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection HE: Structural aluminiumwork

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection L: Medium-pressure pipelines

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection LB: Bedding (pipes)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection LC: Cable ducts

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection LD: Sewers

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection LE: Stormwater drainage

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection LF: Erf connections (water)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection LG: Pipe jacking

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection M: Roads (general)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection ME: Subbase

Title

SANS 10120-2 H:1990

SANS 10120-2 HA:1990

SANS 10120-2 HB:1985

SANS 10120-2 HC:1988

SANS 10120-2 HE:1983

SANS 10120-2 L:1983

SANS 10120-2 LB:1983

SANS 10120-2 LC:1981

SANS 10120-2 LD:1982

SANS 10120-2 LE:1982

SANS 10120-2 LF:1983

SANS 10120-2 LG:1983

SANS 10120-2 M:1996

SANS 10120-2 ME:1981

SANS Number

(SABS 0120-2 H)

(SABS 0120-2 HA)

(SABS 0120-2 HB)

(SABS 0120-2 HC)

(SABS 0120-2 HE)

(SABS 0120-2 L)

(SABS 0120-2 LB)

(SABS 0120-2 LC)

(SABS 0120-2 LD)

(SABS 0120-2 LE)

(SABS 0120-2 LF)

(SABS 0120-2 LG)

(SABS 0120-2 M)

(SABS 0120-2 ME)


October 2009

1

1

2

2

1

1

1

1

3

3

2

3

2

2

Edition

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection MF: Base

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection MFL: Base (light pavement structures)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection MG: Bituminous surface treatment

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection MH: Asphalt base and surfacing

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection MJ: Segmented paving

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection MK: Kerbing and channeling

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection MM: Ancillary roadworks

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 2: Project specificationSection NB: Railway sidings (trackwork)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for design,Introduction

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection A: General

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection AA: General (small works)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection AB: Engineer's office

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection AD: General (small dams)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection AH: General (structural)

Title

SANS 10120-2 MF:1981

SANS 10120-2 MFL:1996

SANS 10120-2 MG:1996

SANS 10120-2 MH:1996

SANS 10120-2 MJ:1984

SANS 10120-2 MK:1983

SANS 10120-2 MM:1984

SANS 10120-2 NB:1981

SANS 10120-3 INTRO:1986

SANS 10120-3 A:1986

SANS 10120-3 AA:1982

SANS 10120-3 AB:1986

SANS 10120-3 AD:1986

SANS 10120-3 AH:1983

SANS Number

(SABS 0120-2 MF)

(SABS 0120-2 MFL)

(SABS 0120-2 MG)

(SABS 0120-2 MH)

(SABS 0120-2 MJ)

(SABS 0120-2 MK)

(SABS 0120-2 MM)

(SABS 0120-2 NB)

(SABS 0120-3 INTRO)

(SABS 0120-3 A)

(SABS 0120-3 AA)

(SABS 0120-3 AB)

(SABS 0120-3 AD)

(SABS 0120-3 AH)


October 2009

2

2

2

2

1

2

1

2

1

2

2

1

1

1

Edition

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection C: Site clearance

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection D: Earthworks

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection DA: Earthworks (small works)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection DB: Earthworks (pipe trenches)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection DE: Small earth dams

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection DK: Gabions and pitching

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection DM: Earthworks (roads, subgrade)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection DN: Earthworks (railway sidings)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection F: Piling

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection G: Concrete (structural)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection GA: Concrete (small works)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection GB: Concrete (ordinary buildings)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection GE: Precast concrete (structural)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection GF: Prestressed concrete

Title

SANS 10120-3 C:1982

SANS 10120-3 D:1982

SANS 10120-3 DA:1982

SANS 10120-3 DB:1982

SANS 10120-3 DE:1984

SANS 10120-3 DK:1996

SANS 10120-3 DM:1981

SANS 10120-3 DN:1982

SANS 10120-3 F:1983

SANS 10120-3 G:1982

SANS 10120-3 GA:1982

SANS 10120-3 GB:1984

SANS 10120-3 GE:1984

SANS 10120-3 GF:1984

SANS Number

(SABS 0120-3 C)

(SABS 0120-3 D)

(SABS 0120-3 DA)

(SABS 0120-3 DB)

(SABS 0120-3 DE)

(SABS 0120-3 DK)

(SABS 0120-3 DM)

(SABS 0120-3 DN)

(SABS 0120-3 F)

(SABS 0120-3 G)

(SABS 0120-3 GA)

(SABS 0120-3 GB)

(SABS 0120-3 GE)

(SABS 0120-3 GF)


October 2009

3

2

1

1

1

2

2

1

2

2

1

1

2

1

Edition

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection H: Structural steelwork

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection HA: Structural steelwork (sundry items)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection HB: Cladding and sheeting

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection HC: Corrosion protection of structuralsteelwork

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection HE: Structural aluminiumwork

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection L: Medium-pressure pipelines

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection LB: Bedding (pipes)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection LC: Cable ducts

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection LD: Sewers

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection LE: Stormwater drainage

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection LF: Erf connections (water)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection LG: Pipe jacking

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection M: Roads (general)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection ME: Subbase

Title

SANS 10120-3 H:1990

SANS 10120-3 HA:1990

SANS 10120-3 HB:1985

SANS 10120-3 HC:1988

SANS 10120-3 HE:1983

SANS 10120-3 L:1983

SANS 10120-3 LB:1983

SANS 10120-3 LC:1981

SANS 10120-3 LD:1982

SANS 10120-3 LE:1982

SANS 10120-3 LF:1983

SANS 10120-3 LG:1983

SANS 10120-3 M:1996

SANS 10120-3 ME:1981

SANS Number

(SABS 0120-3 H)

(SABS 0120-3 HA)

(SABS 0120-3 HB)

(SABS 0120-3 HC)

(SABS 0120-3 HE)

(SABS 0120-3 L)

(SABS 0120-3 LB)

(SABS 0120-3 LC)

(SABS 0120-3 LD)

(SABS 0120-3 LE)

(SABS 0120-3 LF)

(SABS 0120-3 LG)

(SABS 0120-3 M)

(SABS 0120-3 ME)


October 2009

1

1

2

2

1

1

1

1

3

3

2

2

1

2

Edition

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection MF: Base

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection MFL: Base (light pavement structures)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection MG: Bituminous surface treatment

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection MH: Asphalt base and surfacing

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection MJ: Segmented paving

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection MK: Kerbing and channeling

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection MM: Ancillary roadworks

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 3: Guidance for designSection NB: Railway sidings (trackwork)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities, Introduction

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section A: General

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section AA: General (small works)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section AB: Engineer's office

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section AD: General (small dams)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section AH: General (structural)

Title

SANS 10120-3 MF:1981

SANS 10120-3 MFL:1996

SANS 10120-3 MG:1996

SANS 10120-3 MH:1996

SANS 10120-3 MJ:1984

SANS 10120-3 MK:1983

SANS 10120-3 MM:1984

SANS 10120-3 NB:1981

SANS 10120-4 INTRO:1986

SANS 10120-4 A:1986

SANS 10120-4 AA:1982

SANS 10120-4 AB:1982

SANS 10120-4 AD:1984

SANS 10120-4 AH:1983

SANS Number

(SABS 0120-3 MF)

(SABS 0120-3 MFL)

(SABS 0120-3 MG)

(SABS 0120-3 MH)

(SABS 0120-3 MJ)

(SABS 0120-3 MK)

(SABS 0120-3 MM)

(SABS 0120-3 NB)

(SABS 0120-4 INTRO)

(SABS 0120-4 A)

(SABS 0120-4 AA)

(SABS 0120-4 AB)

(SABS 0120-4 AD)

(SABS 0120-4 AH)


October 2009

2

2

2

2

1

1

1

2

1

2

2

1

1

1

Edition

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section C: Site clearance

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section D: Earthworks

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section DA: Earthworks (small works)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section DB: Earthworks (pipe trenches)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section DE: Small earth dams

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section DK: Gabions and pitching

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section DM: Earthworks (roads,subgrade)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section DN: Earthworks (railway sidings)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section F: Piling

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section G: Concrete (structural)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section GA: Concrete (small works)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section GB: Concrete (ordinary buildings)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section GE: Precast concrete (structural)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section GF: Prestressed concrete

Title

SANS 10120-4 C:1982

SANS 10120-4 D:1982

SANS 10120-4 DA:1982

SANS 10120-4 DB:1982

SANS 10120-4 DE:1984

SANS 10120-4 DK:1984

SANS 10120-4 DM:1981

SANS 10120-4 DN:1982

SANS 10120-4 F:1983

SANS 10120-4 G:1982

SANS 10120-4 GA:1982

SANS 10120-4 GB:1984

SANS 10120-4 GE:1984

SANS 10120-4 GF:1984

SANS Number

(SABS 0120-4 C)

(SABS 0120-4 D)

(SABS 0120-4 DA)

(SABS 0120-4 DB)

(SABS 0120-4 DE)

(SABS 0120-4 DK)

(SABS 0120-4 DM)

(SABS 0120-4 DN)

(SABS 0120-4 F)

(SABS 0120-4 G)

(SABS 0120-4 GA)

(SABS 0120-4 GB)

(SABS 0120-4 GE)

(SABS 0120-4 GF)


October 2009

3

2

1

1

1

2

2

1

2

2

1

1

2

1

Edition

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section H: Structural steelwork

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section HA: Structural steelwork (sundryitems)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section HB: Cladding and sheeting

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section HC: Corrosion protection ofstructural steelwork

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section HE: Structural alumuniumwork

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section L: Medium-pressure pipelines

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section LB: Bedding (pipes)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section LC: Cable ducts

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section LD: Sewers

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section LE: Stormwater drainage

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section LF: Erf connections (water)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section LG: Pipe jacking

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section M: Roads (general)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section ME: Subbase

Title

SANS 10120-4 H:1990

SANS 10120-4 HA:1990

SANS 10120-4 HB:1985

SANS 10120-4 HC:1988

SANS 10120-4 HE:1983

SANS 10120-4 L:1983

SANS 10120-4 LB:1983

SANS 10120-4 LC:1981

SANS 10120-4 LD:1982

SANS 10120-4 LE:1982

SANS 10120-4 LF:1983

SANS 10120-4 LG:1983

SANS 10120-4 M:1996

SANS 10120-4 ME:1981

SANS Number

(SABS 0120-4 H)

(SABS 0120-4 HA)

(SABS 0120-4 HB)

(SABS 0120-4 HC)

(SABS 0120-4 HE)

(SABS 0120-4 L)

(SABS 0120-4 LB)

(SABS 0120-4 LC)

(SABS 0120-4 LD)

(SABS 0120-4 LE)

(SABS 0120-4 LF)

(SABS 0120-4 LG)

(SABS 0120-4 M)

(SABS 0120-4 ME)


October 2009

1

1

1

1

1

1

1

1

3

3

2

3

2

2

Edition

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section MF: Base

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedules ofquantities Section MFL: Base (light pavementstructures)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section MG: Bituminous surface treatment

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section MH: Asphalt base and surfacing

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section MJ: Segmented paving

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section MK: Kerbing and channelling

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section MM: Ancillary roadworks

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 4: Typical schedule ofquantities Section NB: Railway sidings (trackwork)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administration,Introduction

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection A: General

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection AA: General (small works)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection AB: Engineer's office

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection AD: General (small dams)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection AH: General (structural)

Title

SANS 10120-4 MF:1981

SANS 10120-4 MFL:1996

SANS 10120-4 MG:1981

SANS 10120-4 MH:1981

SANS 10120-4 MJ:1984

SANS 10120-4 MK:1983

SANS 10120-4 MM:1984

SANS 10120-4 NB:1981

SANS 10120-5 INTRO:1986

SANS 10120-5 A:1986

SANS 10120-5 AA:1982

SANS 10120-5 AB:1986

SANS 10120-5 AD:1986

SANS 10120-5 AH:1983

SANS Number

(SABS 0120-4 MF)

(SABS 0120-4 MFL)

(SABS 0120-4 MG)

(SABS 0120-4 MH)

(SABS 0120-4 MJ)

(SABS 0120-4 MK)

(SABS 0120-4 MM)

(SABS 0120-4 NB)

(SABS 0120-5 INTRO)

(SABS 0120-5 A)

(SABS 0120-5 AA)

(SABS 0120-5 AB)

(SABS 0120-5 AD)

(SABS 0120-5 AH)


October 2009

2

2

2

2

1

2

1

2

1

2

2

1

1

1

Edition

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection C: Site clearance

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection D: Earthworks

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection DA: Earthworks (small works)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection DB: Earthworks (pipe trenches)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection DE: Small earth dams

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection DK: Gabions and pitching

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection DM: Earthworks (roads, subgrade)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection DN: Earthworks (railway sidings)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection F: Piling

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection G: Concrete (structural)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection GA: Concrete (small works)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection GB: Concrete (ordinary buildings)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection GE: Precast concrete (structural)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection GF: Prestressed concrete

Title

SANS 10120-5 C:1982

SANS 10120-5 D:1982

SANS 10120-5 DA:1982

SANS 10120-5 DB:1982

SANS 10120-5 DE:1984

SANS 10120-5 DK:1996

SANS 10120-5 DM:1981

SANS 10120-5 DN:1982

SANS 10120-5 F:1983

SANS 10120-5 G:1982

SANS 10120-5 GA:1982

SANS 10120-5 GB:1984

SANS 10120-5 GE:1984

SANS 10120-5 GF:1984

SANS Number

(SABS 0120-5 C)

(SABS 0120-5 D)

(SABS 0120-5 DA)

(SABS 0120-5 DB)

(SABS 0120-5 DE)

(SABS 0120-5 DK)

(SABS 0120-5 DM)

(SABS 0120-5 DN)

(SABS 0120-5 F)

(SABS 0120-5 G)

(SABS 0120-5 GA)

(SABS 0120-5 GB)

(SABS 0120-5 GE)

(SABS 0120-5 GF)


October 2009

3

2

1

1

1

2

2

1

2

2

1

1

1

1

Edition

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection H: Structural steelwork

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection HA: Structural steelwork (sundry items)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection HB: Cladding and sheeting

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection HC: Corrosion protection of structuralsteelwork

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection HE: Structural aluminiumwork

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection L: Medium-pressure pipelines

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection LB: Bedding (pipes)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection LC: Cable ducts

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection LD: Sewers

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection LE: Stormwater drainage

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection LF: Erf connections (water)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection LG: Pipe jacking

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection M: Roads (general)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection ME: Subbase

Title

SANS 10120-5 H:1990

SANS 10120-5 HA:1990

SANS 10120-5 HB:1985

SANS 10120-5 HC:1988

SANS 10120-5 HE:1983

SANS 10120-5 L:1983

SANS 10120-5 LB:1983

SANS 10120-5 LC:1981

SANS 10120-5 LD:1982

SANS 10120-5 LE:1982

SANS 10120-5 LF:1983

SANS 10120-5 LG:1983

SANS 10120-5 M:1996

SANS 10120-5 ME:1981

SANS Number

(SABS 0120-5 H)

(SABS 0120-5 HA)

(SABS 0120-5 HB)

(SABS 0120-5 HC)

(SABS 0120-5 HE)

(SABS 0120-5 L)

(SABS 0120-5 LB)

(SABS 0120-5 LC)

(SABS 0120-5 LD)

(SABS 0120-5 LE)

(SABS 0120-5 LF)

(SABS 0120-5 LG)

(SABS 0120-5 M)

(SABS 0120-5 ME)


October 2009

1

1

2

2

1

1

1

1

1

1.01

3.01

1.02

1.01

1

2.02

1

1.02

Edition

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection MF: Base

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection MFL: Base (light pavement structures)

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection MG: Bituminous surface treatment

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection MH: Asphalt base and surfacing

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection MJ: Segmented paving

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection MK: Kerbing and channelling

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection MM: Ancillary roadworks

Code of practice for use with standardizedspecifications for civil engineering construction andcontract documents Part 5: Contract administrationSection NB: Railway sidings (trackwork)

Cathodic protection of buried and submergedstructures

The control of undesirable static electricity

The application of soil insecticides for the protectionof buildings

The installation of flexible membrane linings in earthembankment reservoirs

Plastics tape wrapping of steel pipelines

Above-ground storage tanks for petroleum products

The installation and operation of refrigerated milktanks

The application of pesticides in food-handling, food-processing, and catering establishments

The safeness of private swimming pools

Title

SANS 10120-5 MF:1981

SANS 10120-5 MFL:1996

SANS 10120-5 MG:1996

SANS 10120-5 MH:1996

SANS 10120-5 MJ:1984

SANS 10120-5 MK:1983

SANS 10120-5 MM:1984

SANS 10120-5 NB:1981

SANS 10121:1977

SANS 10123:2001

SANS 10124:2006

SANS 10125:2009

SANS 10129:2006

SANS 10131:2004

SANS 10132:2009

SANS 10133:1977

SANS 10134:2008

SANS Number

(SABS 0120-5 MF)

(SABS 0120-5 MFL)

(SABS 0120-5 MG)

(SABS 0120-5 MH)

(SABS 0120-5 MJ)

(SABS 0120-5 MK)

(SABS 0120-5 MM)

(SABS 0120-5 NB)

(SABS 0121)

(SABS 0123)

(SABS 0124)

(SABS 0125)

(SABS 0129)

(SABS 0132)

(SABS 0133)

(SABS 0134)


October 2009

2.01

3.01

3.01

2.01

2.03

3

1.02

2.02

3.01

1.06

1

1

2

1.02

3

4.01

1.01

1.03

1

1.02

Edition

The cleaning and disinfecting of dairy equipmentand soft-serve dispensing units

The installation of glazing in buildings

Fire detection and alarm systems for buildings -System design, installation and servicing

Identification colour marking Part 1: General

Identification colour marking Part 2: Identification ofhazards and equipment in work situations

Identification colour markings Part 3: Contents ofpipelines

Identification colour marking Part 4: Contents of tapsand valves in laboratories

Identification colour marking Part 5: Coding ofcontainers for carrying lubricants and associatedfluids

The processing, testing and storage of silver-gelatinmicrofilm for archival purposes

The wiring of premises Part 1: Low-voltageinstallations

The wiring of premises Part 2: Medium-voltageinstallations above 1 kV a.c. not exceeding 22 kVa.c. and up to and including 3 000 kW installedcapacity

Building drawing practice

Detailing of steel reinforcement for concrete

Concrete masonry construction

Laundry processes and management

Refrigerating systems including plants associatedwith air-conditioning systems

The installation and operation of cable cranes andaerial rope-ways

The mechanical stress grading of softwood timber(flexural method)

The labelling and marking of textiles and householdtextile articles

Calibration of pure-tone audiometers Part 1: Airconduction

Title

SANS 10136:2007

SANS 10137:2002

SANS 10139:2007/BS 5839-1:2002, MOD, Ed. 1

SANS 10140-1:2008

SANS 10140-2:2008

SANS 10140-3:2003

SANS 10140-4:2006

SANS 10140-5:2007

SANS 10141:2007

SANS 10142-1:2008

SANS 10142-2:2009

SANS 10143:1980

SANS 10144:1995

SANS 10145:2000

SANS 10146:2008

SANS 10147:2009

SANS 10148:2003

SANS 10149:2008

SANS 10153:2006

SANS 10154-1:2004

SANS Number

(SABS 0136)

(SABS 0137)

(SABS 0139)

(SABS 0140-1)

(SABS 0140-2)

(SABS 0140-3)

(SABS 0140-4)

(SABS 0140-5)

(SABS 0141)

(SABS 0142-1)

(SABS 0143)

(SABS 0144)

(SABS 0145)

(SABS 0146)

(SABS 0147)

(SABS 0148)

(SABS 0149)

(SABS 0154-1)


October 2009

1.02

1.02

1.01

2

1

2

1

1

2.03

1.01

1

1.02

1

1.01

1.01

1.01

1.02

2

1.01

Edition

Calibration of pure-tone audiometers Part 2: Boneconduction

Accuracy in buildings

The handling of chilled and frozen foods

The general procedures and loadings to be adoptedin the design of buildings

The design of foundations for buildings

The structural use of steel Part 1: Limit-state designof hot-rolled steelwork

The structural use of steel Part 2: Limit-statesdesign of cold-formed steelwork

Structural use of steel Part 4: The design of cold-formed stainless steel structural members

The structural use of timber Part 1: Limit-statesdesign

The structural use of timber Part 2: Allowable stressdesign

The structural use of masonry Part 1: Unreinforcedmasonry walling

The structural use of masonry Part 2: Structuraldesign and requirements for reinforced andprestressed masonry

The overhaul of diesel fuel injection equipment

The quality evaluation of fusion welded joints in steelstructures

The installation of restraining devices (safety belts)in motor vehicles (Incorporating part of EECDirective 77/541 'Safety belts and restraint systemsof motor vehicles', and the amending EEC Directives81/576 and 82/319, with modifications)

Determining the performance of audible warningdevices (hooters) after installation in a motor vehicle

The cleaning and maintenance of floors

The installation, testing and balancing of air-conditioning ductwork

Fire testing of materials, components and elementsused in buildings Part 1: General introduction to themethods of test

Title

SANS 10154-2:2004

SANS 10155:2009

SANS 10156:2007

SANS 10160:1989

SANS 10161:1980

SANS 10162-1:2005

SANS 10162-2:1993/CAN/CSA S136-M89:1989,NEQ

SANS 10162-4:1997

SANS 10163-1:2003

SANS 10163-2:2001

SANS 10164-1:1980

SANS 10164-2:2008

SANS 10166:1984

SANS 10167:2004

SANS 10168:2002/77/541/EEC:1977, MOD;81/576/EEC:1981, MOD; 82/319/EEC:1982, MOD

SANS 10169:2004

SANS 10170:2004

SANS 10173:2003

SANS 10177-1:2005

SANS Number

(SABS 0154-2)

(SABS 0155)

(SABS 0156)

(SABS 0160)

(SABS 0161)

(SABS 0162-1)

(SABS 0162-2)

(SABS 0162-4)

(SABS 0163-1)

(SABS 0163-2)

(SABS 0164-1)

(SABS 0164-2)

(SABS 0166)

(SABS 0167)

(SABS 0168)

(SABS 0169)

(SABS 0170)

(SABS 0173)

(SABS 0177-1)


October 2009

1.01

1.02

1.03

1.02

1.01

1.01

1

1

1.01

1.01

1.06

2.02

1.01

1.01

3.02

1.01

1

1

1

Edition

Fire testing of materials, components and elementsused in buildings Part 2: Fire resistance test forbuilding elements

Fire-testing of materials, components and elementsused in buildings Part 3: Surface fire index offinishing materials

Fire testing of materials, components and elementsused in buildings Part 4: Surface fire index of floorcoverings

Fire testing of materials, components and elementsused in buildings Part 5: Non-combustibility at 750°C of building materials

Fire testing of materials, components and elementsused in buildings Part 6: Non-combustibility at 300°C of electrical insulation materials

Fire testing of materials, components and elementsused in buildings Part 7: Fire test for fire-checkproperties of building elements

Fire testing of materials, components and elementsused in buildings Part 8: Surface burningcharacteristics of building materials

Fire testing of materials, components and elementsused in buildings Part 9: Small-scale burningcharacteristics of building materials: ignition, flamespread and heat contribution

Fire testing of materials, components and elementsused in buildings Part 10: Surface burningcharacteristics of building materials using theinverted channel tunnel test

Fire testing of materials, components and elementsused in buildings Part 11: Large-scale fireperformance evaluation of building envelope thermalinsulation systems (with or without sprinklers)

The measurement of noise emitted by road vehicleswhen stationary

The measurement and assessment of acousticenvironments for audiometric tests

The terminology and classification of adhesives forwood

Definitions for and measurement of bodydimensions

The installation of textile floor coverings

Load securement on vehicles Part 1: Generalrequirements

Load securement on vehicles Part 2: General freight

Load securement on vehicles Part 3: Metal loads

Load securement on vehicles Part 4: Timber andsugar cane

Title

SANS 10177-2:2005

SANS 10177-3:2005

SANS 10177-4:2005

SANS 10177-5:2007

SANS 10177-6:2005

SANS 10177-7:2005

SANS 10177-8:2006

SANS 10177-9:2006

SANS 10177-10:2007

SANS 10177-11:2007

SANS 10181:2003

SANS 10182:2006

SANS 10183:2000

SANS 10184:2008

SANS 10186:2009

SANS 10187-1:2009

SANS 10187-2:2006

SANS 10187-3:2006

SANS 10187-4:2006

SANS Number

(SABS 0177-2)

(SABS 0177-3)

(SABS 0177-4)

(SABS 0177-5)

(SABS 0177-6)

(SABS 0177-7)

(SABS 0181)

(SABS 0182)

(SABS 0183)

(SABS 0184)

(SABS 0186)


October 2009

1

1

1

1

1

2.01

2

2

2

2

2

2

2

2

2

2.01

1

1

Edition

Load securement on vehicles Part 5: Loose bulkloads

Load securement on vehicles Part 6: Containers

Load securement on vehicles Part 7: Abnormalloads

Load securement on vehicles Part 8: Dangerousgoods

Load securement on vehicles Part 9: Glass sheeting

Standard methods of garment measurement

Acoustics - Determination of sound power levels ofnoise sources - Guidelines for the use of basicstandards

Acoustics - Determination of sound power levels ofnoise sources using sound pressure - Precisionmethods for anechoic and hemi-anechoic rooms

The selection, handling and installation of electricpower cables of rating not exceeding 33 kV Part 1:Definitions and statutory requirements

The selection, handling and installation of electricpower cables of rating not exceeding 33 kV Part 2:Selection of cable type and methods of installation

The selection, handling and installation of electricpower cables of rating not exceeding 33 kV Part 3:Earthing systems - General provisions

The selection, handling and installation of electricpower cables of rating not exceeding 33 kV Part 4:Current ratings

The selection, handling and installation of electricpower cables of rating not exceeding 33 kV Part 5:Determination of thermal and electrical resistivity ofsoil

The selection, handling and installation of electricpower cables of rating not exceeding 33 kV Part 6:Transportation and storage

The selection, handling and installation of electricpower cables of rating not exceeding 33 kV Part 7:Safety precautions

The selection, handling and installation of electricpower cables of rating not exceeding 33 kV Part 8:Cable laying and installation

The selection, handling and installation of electricpower cables of rating not exceeding 33 kV Part 9:Jointing and termination of extruded solid dielectric-insulated cables up to 3,3 kV

The selection, handling and installation of electricpower cables of rating not exceeding 33 kV Part 10:Jointing and termination of paper-insulated cables

Title

SANS 10187-5:2006

SANS 10187-6:2006

SANS 10187-7:2006

SANS 10187-8:2006

SANS 10187-9:2006

SANS 10188:2008

SANS 10191:2007/ISO 3740:2000, IDT, Ed. 2

SANS 10196:2007/ISO 3745:2003, IDT, Ed. 2

SANS 10198-1:2004

SANS 10198-2:2004

SANS 10198-3:2004

SANS 10198-4:2005

SANS 10198-5:2004

SANS 10198-6:2004

SANS 10198-7:2004

SANS 10198-8:2007

SANS 10198-9:1988

SANS 10198-10:1988

SANS Number

(SABS 0188)

(SABS 0191)

(SABS 0196)

(SABS 0198-1)

(SABS 0198-2)

(SABS 0198-3)

(SABS 0198-4)

(SABS 0198-5)

(SABS 0198-6)

(SABS 0198-7)

(SABS 0198-8)

(SABS 0198-9)

(SABS 0198-10)


October 2009

1

1

1

2

2

1

1

2.01

1.01

2.01

3

3

2

1

1.03

2.02

1.02

3

4.01

1.01

Edition

The selection, handling and installation of electricpower cables of rating not exceeding 33 kV Part 11:Jointing and termination of screened polymeric-insulated cables

The selection, handling and installation of electricpower cables of rating not exceeding 33 kV Part 12:Installation of earthing system

The selection, handling and installation of electricpower cables of rating not exceeding 33 kV Part 13:Testing, commissioning and fault location

The selection, handling and installation of electricpower cables of rating not exceeding 33 kV Part 14:Installation of aerial bundled conductor (ABC) cables

The design and installation of earth electrodes

Neutral earthing in medium voltage industrial powersystems

Financial transaction cards - Security architecture offinancial transaction systems using integrated circuitcards Part 1: Card life cycle

The application of fumigants

The measurement of noise emitted by motorvehicles in motion

The handling, storage and disposal of pesticides

Design of structures for the mining industry Part 1:Headgear structures

Design of structures for the mining industry Part 2:Sinking stages

Design of structures for the mining industry Part 3:Conveyances

Design of structures for the mining industry Part 4:Shaft system structures

The design and construction of private swimmingpools

Calculating and predicting road traffic noise

The measurement of noise inside motor vehicles

The installation and safe use of ethylene oxide (EO)sterilizers in healthcare facilities and in industry

Evaluation of vehicle test stations

The heat treatment of ground-engaging parts forfarming implements

Title

SANS 10198-11:1988

SANS 10198-12:1988

SANS 10198-13:1988

SANS 10198-14:1996

SANS 10199:2004

SANS 10200:1985

SANS 10202-1:1991/ISO 10202-1:1991, IDT, Ed. 1

SANS 10204:2006

SANS 10205:2007

SANS 10206:2007

SANS 10208-1:2005

SANS 10208-2:2007

SANS 10208-3:2001

SANS 10208-4:2001

SANS 10209:2003

SANS 10210:2004

SANS 10211:2008

SANS 10213:2008

SANS 10216:2007

SANS 10217:2008

SANS Number

(SABS 0198-11)

(SABS 0198-12)

(SABS 0198-13)

(SABS 0198-14)

(SABS 0199)

(SABS 0200)

(SABS ISO 10202-1)

(SABS 0204)

(SABS 0205)

(SABS 0206)

(SABS 0208-1)

(SABS 0208-2)

(SABS 0208-3)

(SABS 0208-4)

(SABS 0209)

(SABS 0210)

(SABS 0211)

(SABS 0213)

(SABS 0216)

(SABS 0217)


October 2009

2.02

1.01

2

2

2

2

2

2

1.01

1.02

1.02

1.01

3

1.01

1.01

1.01

1

1

Edition

Acoustical properties of buildings Part 1: Gradingcriteria for the airborne sound insulation propertiesof buildings

Acoustical properties of buildings Part 2: Theassessment of building plans and buildings withrespect to their acoustical properties

The determination of performance (at net power) ofindustrial internal combustion engines Part 1:Standard reference conditions and declarations ofpower, fuel consumption and lubricating oilconsumption

The determination of performance (at net power) ofindustrial internal combustion engines Part 2: Testmethods

The determination of performance (at net power) ofindustrial internal combustion engines Part 3: Testmeasurements

The determination of performance (at net power) ofindustrial internal combustion engines Part 4: Speedgoverning

The determination of performance (at net power) ofindustrial internal combustion engines Part 5:Torsional vibrations

The determination of performance (at net power) ofindustrial internal combustion engines Part 6:Overspeed protection

The selection, use and maintenance of respiratoryprotective equipment

The testing of geotextiles

Electrical security installations Part 1: General

Electrical security installations Part 2: Access control

Electrical security installations Part 3: Electricsecurity fences (non-lethal)

Electrical security installations Part 5-1-1: CCTVinstallations - CCTV surveillance systems for use insecurity applications - Operational requirements

Electrical security installations Part 5-1-2: CCTVinstallations - CCTV surveillance systems for use insecurity applications - System design requirements

Electrical security installations Part 5-1-3: CCTVinstallations - CCTV surveillance systems for use insecurity applications - Installation, planning andimplementation requirements

Electrical security installations Part 5-1-4: CCTVinstallations - CCTV surveillance systems for use insecurity applications - Testing, commissioning andhand-over requirements

Electrical security installations Part 5-1-5: CCTVinstallations - CCTV surveillance systems for use insecurity applications - Maintenance requirements

Title

SANS 10218-1:2004

SANS 10218-2:2004

SANS 10219-1:2006

SANS 10219-2:2006

SANS 10219-3:2006

SANS 10219-4:2006

SANS 10219-5:2006

SANS 10219-6:2006

SANS 10220:2003

SANS 10221:2007

SANS 10222-1:2007

SANS 10222-2:2007

SANS 10222-3:2006

SANS 10222-5-1-1:2007

SANS 10222-5-1-2:2007

SANS 10222-5-1-3:2007

SANS 10222-5-1-4:2003

SANS 10222-5-1-5:2003

SANS Number

(SABS 0218-1)

(SABS 0218-2)

(SABS 0219-1)

(SABS 0219-2)

(SABS 0219-3)

(SABS 0219-4)

(SABS 0219-5)

(SABS 0219-6)

(SABS 0220)

(SABS 0221)

(SABS 0222-1)

(SABS 0222-2)

(SABS 0222-3)

(SABS 0222-5-1-1)

(SABS 0222-5-1-2)

(SABS 0222-5-1-3)


October 2009

1.01

1

1

2.01

2

4

1

1

3

3

3

1.01

3

1

1.01

2.01

1

1.03

1

2.01

Edition

Electrical security installations Part 5-2: CCTVinstallations - Application guidelines

Non-flammable medical gas pipeline systems

The design and construction of lighting masts

The installation, post-installation tests andmaintenance of microbiological safety cabinets

Criteria for the operation of inspection authoritiesperforming inspection in terms of the PressureEquipment Regulations

The identification and classification of dangerousgoods for transport

Transport of dangerous goods - Packaging andlarge packaging for road and rail transport Part 1:Packaging

Transport of dangerous goods - Packaging andlarge packaging for road and rail transport Part 2:Large packaging

Transport of dangerous goods - Operationalrequirements for road vehicles

Transport of dangerous goods - Emergencyinformation systems Part 1: Emergency informationsystem for road transport

Transport of dangerous goods - Emergencyinformation systems Part 3: Emergency responseguides

Transport of dangerous goods - Emergencyinformation systems Part 4: Transport emergencycard

Transport of dangerous goods - Intermediate bulkcontainers for road and rail transport

List of classification and labelling of chemicals inaccordance with the Globally Harmonized System(GHS)

Globally Harmonized System of classification andlabelling of chemicals (GHS)

Fibre-content labelling of textiles and textile products

Roof and side cladding

Welding and thermal cutting processes - Health andsafety

Hygienic practices on commercial fishing vessels

The installation of replacement auto glass in motorvehicles by the direct glazing method

Title

SANS 10222-5-2:2007/BS EN 50132-7:1997, MOD,Ed. 1

SANS 10224:1990/ISO 7396:1987, NEQ, Ed. 1

SANS 10225:1991

SANS 10226:2009

SANS 10227:2007

SANS 10228:2006

SANS 10229-1:2005

SANS 10229-2:2007

SANS 10231:2006

SANS 10232-1:2007

SANS 10232-3:2007

SANS 10232-4:2007

SANS 10233:2008

SANS 10234 SUPPLEMENT:2008

SANS 10234:2008

SANS 10235:2007

SANS 10237:1991

SANS 10238:2005

SANS 10239:1992

SANS 10240:2005

SANS Number

(SABS 0222-5-2)

(SABS 0224)

(SABS 0225)

(SABS 0226)

(SABS 0227)

(SABS 0228)

(SABS 0231)

(SABS 0232-1)

(SABS 0232-3)

(SABS 0233)

(SABS 0235)

(SABS 0237)

(SABS 0238)

(SABS 0239)

(SABS 0240)


October 2009

1.02

1.04

3

1

1

1.01

1

1.01

2

1

1.01

1

2

1

1.02

3

2.01

1.01

1.02

1.02

Edition

Tachograph centres - Installation and repairfacilities, including facilities for the installation of on-board computers

The rewinding and refurbishing of rotating electricalmachines Part 1: Low-voltage three-phase inductionmotors

The manufacture and erection of timber trusses

Steel wire and wire products - Non-ferrous metalliccoatings on steel wire Part 1: General principles

Steel wire and wire products - Non-ferrous metalliccoatings on steel wire Part 2: Zinc and zinc alloycoatings

The maintenance of textile floor coverings

Accessibility of buildings to disabled persons

The cleaning of textile upholstered furniture

Management of healthcare waste

Management of healthcare waste - Part 1:Management of healthcare risk waste from ahealthcare facility

Masonry walling

Automotive air-conditioning system fitment andrepair centres

Water supply and drainage for buildings Part 1:Water supply installations for buildings

Water supply and drainage for buildings Part 2:Drainage installations for buildings

Brake service workshops

The installation, maintenance, replacement andrepair of fixed electric storage water heating systems

Health, safety and environmental guidelines for theconstruction and operation of timber treatmentplants

Brake drum reconditioning

The reconditioning of valves for use with pipelines

Industrial gas pipelines Part 1: Distribution ofoxygen, nitrogen and argon at consumer sites

Title

SANS 10241:2008

SANS 10242-1:1999

SANS 10243:2004

SANS 10244-1:2003/EN 10244-1:2001, IDT, Ed. 1

SANS 10244-2:2003/EN 10244-2:2001, IDT, Ed. 1

SANS 10245:2008

SANS 10246:1993

SANS 10247:2009

SANS 10248:2004

SANS 10248-1:2008

SANS 10249:2009

SANS 10250:2006

SANS 10252-1:2004

SANS 10252-2:1993

SANS 10253:2005

SANS 10254:2004

SANS 10255:2009

SANS 10256:2005

SANS 10257:2004

SANS 10260-1:2004

SANS Number

(SABS 0241)

(SABS 0242-1)

(SABS 0243)

(SABS 0245)

(SABS 0246)

(SABS 0247)

(SABS 0248)

(SABS 0249)

(SABS 0252-1)

(SABS 0252-2)

(SABS 0253)

(SABS 0254)

(SABS 0255)

(SABS 0256)

(SABS 0257)

(SABS 0260-1)


October 2009

1.01

1.01

1.01

2.01

1

1

1.01

2

2

2

1

2

3.01

1.03

1.01

1.01

1.01

1.01

1

1.03

1.03

Edition

Industrial gas pipelines Part 2: Distribution ofhydrogen at consumer sites

Industrial gas pipelines Part 3: Distribution ofacetylene at consumer sites

Industrial gas pipelines Part 4: Distribution of carbondioxide at consumer sites

Radio sites Part 1: Technical performance(narrowband analog mobile radio services)

The warehousing of dangerous goods Part 0:General requirements

The warehousing of dangerous goods Part 2: Thestorage and handling of gas cylinders

The warehousing of dangerous goods Part 5: Thestorage and handling of oxidizing substances

Disaster management Part 1: Terminology andimplementation

Disaster management Part 2: All-risk emergencyoperation planning

Disaster management Part 3: Hazard-specificresponse planning

The classification and labelling of dangeroussubstances and preparations for sale and handling

The safe use, operation and inspection of man-riding belt conveyors in mines

Homologation of motor vehicle models

Welding of thermoplastics - Welding processes Part1: Heated-tool welding

Welding of thermoplastics - Welding processes Part2: Electrofusion welding

Welding of thermoplastics - Welding processes Part3: Hot-gas welding

Welding of thermoplastics - Welding processes Part4: Hot-gas extrusion welding

Welding of thermoplastics - Welding processes Part5: Solvent welding

Welding of thermoplastics - Welding processes Part6: Ultrasonic welding, staking and insertion

Welding of thermoplastics - Welding processes Part10: Weld defects

Welding of thermoplastics - Testing and approval ofwelders

Title

SANS 10260-2:2004

SANS 10260-3:2004

SANS 10260-4:2004

SANS 10262-1:2006

SANS 10263-0:2009

SANS 10263-2:2008

SANS 10263-5:2009

SANS 10264-1:2009

SANS 10264-2:2009

SANS 10264-3:2009

SANS 10265:1999

SANS 10266:2007

SANS 10267:2006

SANS 10268-1:2009

SANS 10268-2:2004

SANS 10268-3:2005

SANS 10268-4:2004

SANS 10268-5:2004

SANS 10268-6:2003

SANS 10268-10:2009

SANS 10269:2009

SANS Number

(SABS 0260-2)

(SABS 0260-3)

(SABS 0260-4)

(SABS 0262-1)

(SABS 0264-1)

(SABS 0264-2)

(SABS 0264-3)

(SABS 0265)

(SABS 0266)

(SABS 0267)

(SABS 0268-1)

(SABS 0268-2)

(SABS 0268-3)

(SABS 0268-4)

(SABS 0268-5)

(SABS 0268-10)

(SABS 0269)


October 2009

1.01

1.01

1

1.01

1.01

1.01

1.01

1

1.01

1

2

1

1

1

1

1.01

1

1

1

1

Edition

Welding of thermoplastics - Approval of weldingprocedures and welds

The refurbishing of diesel engines

Metallic materials - Sheet and strip - Determinationof tensile strain hardening exponent

Motor vehicle radiator reconditioning workshops

The remanufacture of petrol engines

The rebuilding of automotive gearboxes

Overhead power lines for conditions prevailing inSouth Africa

Overhead power lines for conditions prevailing inSouth Africa Part 1: Safety

Engine speed (S values), reference sound levelsand permissible sound levels of stationary roadvehicles

Maintenance of helmet light assemblies

Conveyor belts - Electrical conductivity -Specification and test method

Rolling bearings, linear motion, recirculating ball,sleeve type - Metric series

Mine residue

Automatic sprinkler installations for fire-fightingpurposes

Methods for corrosion testing of metallic and otherinorganic coatings on metallic substrates - Rating oftest specimens and manufactured articles subjectedto corrosion tests

Earthing of low-voltage (LV) distribution systems

Condition assessment of steel wire ropes on minewinders

The performance, operation, testing andmaintenance of drum winders relating to rope safety

Suspended access equipment Part 1: Permanentlysuspended access equipment

Suspended access equipment Part 2: Temporarysuspended platforms (TSPs)

Title

SANS 10270:2004

SANS 10274:2005

SANS 10275:2003/ISO 10275:1993, IDT, Ed. 1

SANS 10276:2005

SANS 10278:2005

SANS 10279:2005

SANS 10280:2001

SANS 10280-1:2008/NRS 041-1:2008, IDT, Ed. 1

SANS 10281:2003

SANS 10282:1997

SANS 10284:2006/ISO 284:2003, IDT, Ed. 3

SANS 10285:2005/ISO 10285:1992, IDT, Ed. 1

SANS 10286:1998

SANS 10287:2000

SANS 10289:2008/ISO 10289:1999, IDT, Ed. 1

SANS 10292:2001

SANS 10293:1996

SANS 10294:2000

SANS 10295-1:2003

SANS 10295-2:2005

SANS Number

(SABS 0270)

(SABS 0274)

(SABS 0276)

(SABS 0278)

(SABS 0279)

(SABS 0280)

(SABS 0281)

(SABS 0282)

(SABS 0286)

(SABS 0287)

(SABS 0292)

(SABS 0293)

(SABS 0294)


October 2009

2

1.01

1.02

1

1.01

1

1.01

1.02

1.02

1

1

1

1.01

1.01

1

1.01

1.01

1.01

1.01

Edition

Hand signals used with cranes and with lifting andsuspended equipment

The reconditioning of external LPG cylinder valves

Indirect small to medium-sized gas chlorinationsystems for the disinfection of water

Development, maintenance and management ofgroundwater resources Part 0: Glossary of terms

Development, maintenance and management ofgroundwater resources Part 1: The location andsiting of water boreholes

Development, maintenance and management ofgroundwater resources Part 2: The design,construction and drilling of boreholes

Development, maintenance and management ofgroundwater resources Part 4: Test-pumping ofwater boreholes

Development, maintenance and management ofgroundwater resources Part 5: The design, selectionand performance of pumping equipment forproduction boreholes

Development, maintenance and management ofgroundwater resources Part 6: The installation andcommissioning of pumping equipment for productionboreholes

Development, maintenance and management ofgroundwater resources Part 7: The rehabilitation ofwater boreholes

Development, maintenance and management ofgroundwater resources Part 8: The management ofwater boreholes

Development, maintenance and management ofgroundwater resources Part 9: Thedecommissioning of water boreholes

Tail lifts, mobile lifts and ramps associated withvehicles

The classification of pesticides and stock remediesfor sale and handling in South Africa Part 1: Theclassification of pesticides

The classification of pesticides and stock remediesfor sale and handling in South Africa Part 2: Theclassification of stock remedies

Painting of buildings Part 1: Paint and paintselection

Painting of buildings Part 2: Paint application anddefects

Painting of buildings Part 3: Paint types

Painting of buildings Part 4: Painting of walls,ceilings and cladding

Title

SANS 10296:2008

SANS 10297:2006

SANS 10298:2009

SANS 10299-0:2003

SANS 10299-1:2003

SANS 10299-2:2003

SANS 10299-4:2003

SANS 10299-5:2003

SANS 10299-6:2009

SANS 10299-7:2003

SANS 10299-8:2003

SANS 10299-9:2003

SANS 10302:2008

SANS 10304-1:2008

SANS 10304-2:2002

SANS 10305-1:2005

SANS 10305-2:2005

SANS 10305-3:2005

SANS 10305-4:2005

SANS Number

(SABS 0296)

(SABS 0297)

(SABS 0298)

(SABS 0299-1)

(SABS 0299-4)

(SABS 0299-5)

(SABS 0299-6)

(SABS 0302)

(SABS 0304-1)

(SABS 0305-1)

(SABS 0305-2)

(SABS 0305-3)

(SABS 0305-4)


October 2009

1.01

1.01

1

1.01

1.01

3

1.02

1.01

1.01

1

2

1.01

1.01

1.01

1.01

3

1.01

2.01

1

1.01

Edition

Painting of buildings Part 5: Painting of roofs andsteel structures

Painting of buildings Part 6: Painting of wood

The management of potable water in distributionsystems

Cranes, lifting and suspended equipment - Supportdocumentation and training

The manufacture and reconditioning of replacementbrake lining assemblies

Protection against lightning - Physical damage tostructures and life hazard

Aircraft ground support - Vehicle-mounted loadingequipment

Instructions for the use of consumer products -Electrical appliances

The registration of manufacturers, importers andbuilders of categories M, N, O and L motor vehiclesand agricultural tractors

South African guide to the systematic evaluation ofcoal resources and coal reserves

Surface finishing of architectural aluminium

Inspection and supplemental treatment of treatedwood utility poles

The safe application of detonator systems for use inmining and civil blasting applications Part 1:Electronic detonator systems

The safe application of detonator systems for use inmining and civil blasting applications Part 2: Electricdetonator systems - Shot exploder based

Structural bearings - The design of bridge bearings

Methods for environmental noise impactassessments

The design and construction of sectional steel tanksfor storage of liquids at or above ground level

Requirements for a Hazard Analysis and CriticalControl Point (HACCP) system

Translocation of certain species of wild herbivore

Industrial rope access Part 1: Worksite procedures

Title

SANS 10305-5:2005

SANS 10305-6:2005

SANS 10306:1999

SANS 10307:2006

SANS 10310:2005

SANS 10313:2008

SANS 10316:2009

SANS 10317:2004

SANS 10319:2006

SANS 10320:2004

SANS 10322:2005

SANS 10324:2007

SANS 10325-1:2007

SANS 10325-2:2007

SANS 10326:2008

SANS 10328:2008

SANS 10329:2004

SANS 10330:2007

SANS 10331:2000

SANS 10333-1:2006

SANS Number

(SABS 0305-5)

(SABS 0305-6)

(SABS 0306)

(SABS 0307)

(SABS 0310)

(SABS 0313)

(SABS 0316)

(SABS 0317)

(SABS 0319)

(SABS 0322)

(SABS 0324)

(SABS 0325-1)

(SABS 0325-2)

(SABS 0326)

(SABS 0328)

(SABS 0329)

(SABS 0330)

(SABS 0331)

(SABS 0333-1)


October 2009

1.01

1.01

1

1.01

2

1.01

1

1.02

1.01

1.01

1

1

1

2

1.01

1.02

1

1

1.01

1

Edition

Industrial rope access Part 2: Training andcertification procedures

Industrial rope access Part 3: Inspection,certification and management procedures forequipment

The installation, maintenance and safe use ofoverhead monorail transport systems forunderground use

Homologation of respiratory equipment

Underground rail trackwork in mines

Installation of telecommunication cables Part 1:Fibre optic cable in buildings

Installation of telecommunication cables Part 2:Outdoor fibre optic cables

Installation and maintenance of bearings - Generalguidelines

Verification of non-automatic electronic self-indicating road vehicle mass measuring equipmentfor use by road traffic authorities

Complaints handling

Avoidance of hazards underground in collieries dueto lightning

Fibre-reinforced plastics (FRP) composites -Glossary of technical terms

Small arms shooting ranges

The safe application of underground railway drivenand non-driven wheel sets

The repair of heavy-duty tubeless and multi-piecesteel wheels for off-road vehicles

The calculation of sound propagation by theConcawe method

Water quality - Determination of fluoride Part 1:Electrochemical probe method for potable and lightlypolluted water

Water quality - Determination of fluoride Part 2:Determination of inorganically bound total fluorideafter digestion and distillation

The maintenance and repair of electric and hydraulicpowered lifts, escalators and passenger conveyors

Textile floor coverings - Production of changes inappearance by means of Vettermann drum andhexapod tumbler testers

Title

SANS 10333-2:2006

SANS 10333-3:2006

SANS 10335:1999

SANS 10338:2009

SANS 10339:2006

SANS 10340-1:2006

SANS 10340-2:2006

SANS 10341:2009

SANS 10343:2003

SANS 10346:2007

SANS 10347:2002

SANS 10349:2004

SANS 10353:2003

SANS 10354:2007

SANS 10356:2005

SANS 10357:2004

SANS 10359-1:2002/ISO 10359-1:1992, IDT, Ed. 1

SANS 10359-2:2005/ISO 10359-2:1994, IDT, Ed. 1

SANS 10360:2006

SANS 10361:2000/ISO 10361:2000, IDT, Ed. 1

SANS Number

(SABS 0333-2)

(SABS 0333-3)

(SABS 0335)

(SABS 0338)

(SABS 0339)

(SABS 0340-1)

(SABS 0341)

(SABS 0343)

(SABS 0346)

(SABS 0347)

(SABS 0354)

(SABS 0356)

(SABS 0357)

(SABS 0360)

(SABS ISO/TR 10361)


October 2009

2

1.01

1.01

1.01

1

1

2

2

1

2

1

2

1

1.01

1

1

1

1

1

Edition

Health and safety at events - Requirements

Transport of low-hazard goods in bulk - Emergencyinformation for road vehicles

Non-destructive examination and testing of steelwire rope

Road vehicles designed or adapted for use by ortransporting persons with disabilities

Terms and definitions for clothing

Automotive fitment centres

Identification cards - Test methods Part 1: Generalcharacteristics

Identification cards - Test methods Part 2: Cardswith magnetic stripes

Identification cards - Test methods Part 3: Integratedcircuit(s) cards with contacts and related interfacedevices

Identification cards - Test methods - Part 5: Opticalmemory cards

Identification cards - Test methods Part 6: Proximitycards

Identification cards - Test methods - Part 7: Vicinitycards

The inspection, testing and examination of overheadcranes

Pressure vessels for human occupancy Part 1:Hyperbaric chambers (therapeutic)

General requirements for the competence ofverification laboratories in terms of the TradeMetrology Act

Zoo and aquarium practice

Procedures for sampling vegetation according toscale

Railway carriages for transporting persons withspecial needs Part 1: Commuter carriages

Railway carriages for transporting persons withspecial needs Part 2: Long-distance carriages

Title

SANS 10366:2009

SANS 10368:2007

SANS 10369:2007

SANS 10370:2008

SANS 10371:2005

SANS 10372:2003







SANS 10375:2006

SANS 10377-1:2006

SANS 10378:2005

SANS 10379:2005

SANS 10380:2003

SANS 10383-1:2003

SANS 10383-2:2006

SANS Number

(SABS 0368)

(SABS 0369)

(SABS 0370)

(SABS 0377-1)


October 2009

1

1

1

1

1

1

1.01

1

1

1

1

1

1

2

1

2

1

1.01

1.01

Edition

Requirements for the implementation of an identitypreservation system (IP system) Part 1: IP systemfor the production, storage, handling andtransportation of non-genetically modifiedunprocessed agricultural products

Requirements for the implementation of an identitypreservation system (IP system) Part 2: IP systemfor the processing and manufacturing industry

Requirements for the implementation of an identitypreservation system (IP system) Part 3: Samplingand testing protocols

The care and use of animals for scientific purposes

The inspection, examination and testing of lift trucks

Exterior lighting Part 1: Artificial lighting of exteriorareas for work and safety

Exterior lighting Part 2: Exterior security lighting

Exterior lighting Part 3: Guide on the limitation of theeffects of obtrusive light from outdoor lightinginstallations

The welfare of wild animals transported by sea

Hair care products - General requirements

Implementing preferential construction procurementpolicies using targeted procurement procedures

Environmental considerations for the planning andmanagement of telecommunication structures

Quality management systems - Requirements forbus operators

The application of the National Building Regulations

Formatting and compilation of constructionprocurement documents

The design and safe use of underground minerolling stock

Transport of dangerous goods by rail - Operationaland design requirements and emergencypreparedness

Transport of dangerous goods - The reprocessing ofpreviously certified packaging

Thatched roof construction

Title

SANS 10385-1:2005

SANS 10385-2:2007

SANS 10385-3:2007

SANS 10386:2008

SANS 10388:2008

SANS 10389-1:2003

SANS 10389-2:2007

SANS 10389-3:2004/CIE 150:2003, IDT, Ed. 1

SANS 10391:2004

SANS 10393:2008

SANS 10396:2003

SANS 10397:2003

SANS 10399:2003

SANS 10400:1990

SANS 10403:2003

SANS 10404:2007

SANS 10405:2009

SANS 10406:2007

SANS 10407:2006

SANS Number

(SABS 0400)


October 2009

1

1

1

2

2

2

1

1

1

1

1

1

2

2

1

1

1

1

1

1

Edition

Repairs to tyres for motor vehicles

Design, selection and installation of geomembranes

Building materials and products - Procedures fordetermining declared and design thermal values

Gas cylinders - Welded carbon-steel gas cylinders -Periodic inspection and testing

Gas cylinders - Seamless aluminium-alloy gascylinders - Periodic inspection and testing

Gas cylinders - Transportable cylinders for dissolvedacetylene - Periodic inspection and maintenance

Safety requirements for industrial laundry machineryPart 1: Common requirements

Safety requirements for industrial laundry machineryPart 2: Washing machines and washer-extractors

Safety requirements for industrial laundry machineryPart 3: Washing tunnel lines including componentmachines

Safety requirements for industrial laundry machineryPart 4: Air dryers

Safety requirements for industrial laundry machineryPart 5: Flatwork ironers, feeders and folders

Safety requirements for industrial laundry machineryPart 6: Ironing and fusing presses

Plastics piping systems for hot and cold waterinstallations - Guidance for classification and design

Identification cards - Contactless integrated circuit(s)cards - Close-coupled cards Part 1: Physicalcharacteristics

Identification cards - Contactless integrated circuit(s)cards Part 2: Dimensions and location of couplingareas

Identification cards - Contactless integrated circuit(s)cards Part 3: Electronic signals and resetprocedures

Water quality - Determination of aluminium -Spectrometric method using pyrocatechol violet

Small craft - Hydraulic steering systems

Micrographics - Rotary camera systems - Test targetfor checking performance

Explanatory notes on SANS 351

Title

SANS 10408:2005

SANS 10409:2005

SANS 10456:2007/ISO 10456:1999, IDT, Ed. 2

SANS 10460:2006/ISO 10460:2005, IDT, Ed. 2

SANS 10461:2006/ISO 10461:2005, IDT, Ed. 2

SANS 10462:2006/ISO 10462:2005, IDT, Ed. 2

SANS 10472-1:1997/ISO 10472-1:1997, IDT, Ed. 1

SANS 10472-2:1997/ISO 10472-2:1997, IDT, Ed. 1

SANS 10472-3:1997/ISO 10472-3:1997, IDT, Ed. 1

SANS 10472-4:1997/ISO 10472-4:1997, IDT, Ed. 1

SANS 10472-5:1997/ISO 10472-5:1997, IDT, Ed. 1

SANS 10472-6:1997/ISO 10472-6:1997, IDT, Ed. 1

SANS 10508:2008/ISO 10508:2006, IDT, Ed. 2




SANS 10566:2006/ISO 10566:1994, IDT, Ed. 1

SANS 10592:2008/ISO 10592:1994, IDT, Ed. 1

SANS 10594:2007/ISO 10594:2006, IDT, Ed. 2

SANS 10657:2005/ISO/TR 10657:1991, IDT, Ed. 1

SANS Number

(SABS ISO 10472-1)

(SABS ISO 10472-2)

(SABS ISO 10472-3)

(SABS ISO 10472-4)

(SABS ISO 10472-5)

(SABS ISO 10472-6)

(SABS ISO 10508)



October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

2

1

Edition

Water quality - Detection and enumeration ofbacteriophages Part 1: Enumeration of F-specificRNA bacteriophages

Water quality - Detection and enumeration ofbacteriophages Part 2: Enumeration of somaticcoliphages

Water quality - Detection and enumeration ofbacteriophages Part 4: Enumeration ofbacteriophages infecting Bacteroides fragilis

Information technology - Open distributedprocessing - Reference model: Overview

Information technology - Open distributedprocessing - Reference model: Foundations

Information technology - Open distributedprocessing - Reference model: Architecture

Information technology - Open distributedprocessing - Reference model: Architecturalsemantics

Coal sizing equipment - Performance evaluation

Coal preparation plant - Assessment of the liabilityto breakdown in water of materials associated withcoal seams

Rubber, vulcanized or thermoplastic - Determinationof compression set at ambient, elevated or lowtemperatures

Rubber, vulcanized or thermoplastic - Determinationof compression set Part 1: At ambient or elevatedtemperatures

Rubber, vulcanized or thermoplastic - Determinationof compression set Part 2: At low temperatures

Guidelines for the selection of roller chain drives

Textile floor coverings - Non-destructivemeasurement of pile thickness above the backing -WRONZ gauge method

Acoustics - Methods for the description and physicalmeasurement of single impulses or series ofimpulses

Information and documentation - Internationalstandard music number (ISMN)

Textile floor coverings - Determination of electricalresistance

Earth-moving machinery - Operator's controls

Cranes - Requirements for mechanisms Part 3:Tower cranes

Title

SANS 10705-1:2002/ISO 10705-1:1995, IDT, Ed. 1

SANS 10705-2:2002/ISO 10705-2:2000, IDT, Ed. 1

SANS 10705-4:2005/ISO 10705-4:2001, IDT, Ed. 1





SANS 10752:1994/ISO 10752:1994, IDT, Ed. 1

SANS 10753:2005/ISO 10753:1994, IDT, Ed. 1

SANS 10815:2003/ISO 815:1991, IDT, Ed. 2

SANS 10815-1:2009/ISO 815-1:2008, IDT, Ed. 1

SANS 10815-2:2009/ISO 815-2:2008, IDT, Ed. 1

SANS 10823:2007/ISO 10823:2004, IDT, Ed. 2

SANS 10834:2003/ISO 10834:1992, IDT, Ed. 1

SANS 10843:1997/ISO 10843:1997, MOD, Ed. 1

SANS 10957:2009/ISO 10957:1993, IDT, Ed. 1

SANS 10965:1998/ISO 10965:1998, IDT, Ed. 1

SANS 10968:2008/ISO 10968:2004, IDT, Ed. 2

SANS 10972-3:2007/ISO 10972-3:2003, IDT, Ed. 1

SANS Number

(SABS ISO 10752)

(SABS ISO 10843)

(SABS ISO 10965)


October 2009

1

1

1

1

1

1

2

1

1

1

1

1

1

3

1

1

1

1

1

Edition

Cranes - Spare parts manual

Biological evaluation of medical devices Part 1:Evaluation and testing

Biological evaluation of medical devices Part 3: Testfor genotoxicity, carcinogenicity and reproductivetoxicity

Biological evaluation of medical devices Part 4:Selection of tests for interactions with blood

Biological evaluation of medical devices Part 5:Tests for in vitro cytotoxicity

Biological evaluation of medical devices Part 10:Tests for irritation and delayed-type hypersensitivity

Biological evaluation of medical devices Part 11:Tests for systemic toxicity

Safety data sheet for chemical products Part 1:Content and order of sections

Prefilled syringes Part 1: Glass cylinders for dentallocal anaesthetic cartridges

Plastics - Symbols and abbreviated terms Part 1:Basic polymers and their special characteristics

Plastics - Symbols and abbreviated terms Part 2:Fillers and reinforcing materials

Water quality - Determination of chromium (VI) -Spectrometric method using 1,5-diphenylcarbazide

Small craft - Ventilation of petrol engine and/orpetrol tank compartments

Washing pretreatment of textile fabrics

Gas cylinders - Refillable seamless steel tubes ofwater capacity between 150 l and 3 000 l - Design,construction and testing

Microbiology of food and animal feeding stuffs -Guidelines on preparation and production of culturemedia Part 2: Practical guidelines on performancetesting of culture media

Sterilization of health care products - Ethylene oxidePart 1: Requirements for development, validationand routine control of a sterilization process formedical devices

Sterilization of health care products - Radiation Part1: Requirements for development, validation androutine control of a sterilization process for medicaldevices

Sterilization of health care products - Radiation Part2: Establishing the sterilization dose

Title

SANS 10973:1995/ISO 10973:1995, IDT, Ed. 1

SANS 10993-1:2003/ISO 10993-1:1997, IDT, Ed. 2

SANS 10993-3:2004/ISO 10993-3:2003, IDT, Ed. 2

SANS 10993-4:2004/ISO 10993-4:2002, IDT, Ed. 2

SANS 10993-5:2003/ISO 10993-5:1999, IDT, Ed. 2

SANS 10993-10:2004/ISO 10993-10:2002, IDT, Ed. 2

SANS 10993-11:2008/ISO 10993-11:2006, IDT, Ed. 2

SANS 11014-1:1994/ISO 11014-1:1994, IDT, Ed. 1

SANS 11040-1:2007/ISO 11040-1:1992, IDT, Ed. 1

SANS 11043-1:2004/ISO 1043-1:2001, IDT, Ed. 3

SANS 11043-2:2004/ISO 1043-2:2000, IDT, Ed. 2

SANS 11083:2005/ISO 11083:1994, IDT, Ed. 1

SANS 11105:2008/ISO 11105:1997, IDT, Ed. 2

SANS 11108:2008

SANS 11120:1999/ISO 11120:1999, IDT, Ed. 1

SANS 11133-2:2004/ISO/TS 11133-2:2003, IDT, Ed.1

SANS 11135-1:2008/ISO 11135-1:2007, IDT, Ed. 1

SANS 11137-1:2007/ISO 11137-1:2006, IDT, Ed. 1

SANS 11137-2:2007/ISO 11137-2:2006, IDT, Ed. 1

SANS Number

(SABS ISO 10973)

(SABS ISO 11014-1)

(SABS SM 1108)

(SABS ISO 11120)


October 2009

1

2

2

2

2.04

3

1

1

1

1

1

1

1

1

1

1

Edition

Sterilization of health care products - Radiation Part3: Guidance on dosimetric aspects

Sterilization of health care products - Biologicalindicators Part 1: General requirements

Sterilization of health care products - Biologicalindicators Part 2: Biological indicators for ethyleneoxide sterilization processes

Sterilization of health care products - Biologicalindicators Part 3: Biological indicators for moist heatsterilization processes

Textiles - Colour fastness to domestic washingprocedures

Textiles - Dimensional stability during domesticwashing and drying procedures

Machinery for forestry - Wheeled special machines -Vocabulary, performance test methods and criteriafor brake systems

Single-use medical examination gloves Part 1:Specification for gloves made from rubber latex orrubber solution

Acoustics - Noise emitted by machinery andequipment - Guidelines for the use of basicstandards for the determination of emission soundpressure levels at a work station and at otherspecified positions

Acoustics - Noise emitted by machinery andequipment - Measurement of emission soundpressure levels at a work station and at otherspecified positions - Engineering method in anessentially free field over a reflecting plane

Acoustics - Noise emitted by machinery andequipment - Measurement of emission soundpressure levels at a work station and at otherspecified positions - Survey method in situ

Acoustics - Noise emitted by machinery andequipment - Determination of emission soundpressure levels at a work station and at otherspecified positions from the sound power level

Acoustics - Noise emitted by machinery andequipment - Measurement of emission soundpressure levels at a work station and at otherspecified positions - Method requiring environmentalcorrections

Determination of platinum in platinum jewelleryalloys - Gravimetric method after precipitation ofdiammonium hexachloroplatinate

Milk - Determination of lactulose content - Enzymaticmethod

Microbiology of food and animal feeding stuffs -Horizontal method for the detection andenumeration of Listeria monocytogenes Part 1:Detection method

Title

SANS 11137-3:2007/ISO 11137-3:2006, IDT, Ed. 1

SANS 11138-1:2007/ISO 11138-1:2006, IDT, Ed. 2

SANS 11138-2:2007/ISO 11138-2:2006, IDT, Ed. 2

SANS 11138-3:2007/ISO 11138-3:2006, IDT, Ed. 2

SANS 11166:2006

SANS 11167:2005

SANS 11169:2003/ISO 11169:1993, IDT, Ed. 1

SANS 11193-1:2004/ISO 11193-1:2002, IDT, Ed. 1

SANS 11200:1995/ISO 11200:1995, IDT, Ed. 1

SANS 11201:1995/ISO 11201:1995, IDT, Ed. 1

SANS 11202:1995/ISO 11202:1995, IDT, Ed. 1

SANS 11203:1995/ISO 11203:1995, IDT, Ed. 1

SANS 11204:1995/ISO 11204:1995, IDT, Ed. 1

SANS 11210:1995/ISO 11210:1995, IDT, Ed. 1

SANS 11285:2005/ISO 11285:2004, IDT, Ed. 1

SANS 11290-1:1996/ISO 11290-1:1996, IDT, Ed. 1

SANS Number

(SABS ISO 11138-1)

(SABS ISO 11138-2)

(SABS ISO 11138-3)

(SABS SM 1166)

(SABS SM 1167)

(SABS ISO 11200)

(SABS ISO 11201)

(SABS ISO 11202)

(SABS ISO 11203)

(SABS ISO 11204)

(SABS ISO 11210)

(SABS ISO 11290-1)


October 2009

1

1

1

1

1

1

2

2

1

1

1

1

3

1

1

1

1

1

1

Edition

Microbiology of food and animal feeding stuffs -Horizontal method for the detection andenumeration of Listeria monocytogenes Part 2:Enumeration method

Rubber - Assessment of carbon black dispersion -Rapid comparative methods

Rubber, vulcanized or thermoplastic - Estimation oflife-time and maximum temperature of use from anArrhenius plot

Textile floor coverings - Floor soiling - Test site set-up and soiling evaluation

Textile floor coverings - Laboratory soiling tests Part2: Drum test

Textile floor coverings - Laboratory cleaningprocedure using spray extraction

Rubber - Determination of solvent extract

Determination of gold in gold jewellery alloys -Cupellation method (fire assay)

Determination of silver in silver jewellery alloys -Volumetric (potentiometric) method using potassiumbromide

Rubber, vulcanized or thermoplastic - Resistance toozone cracking Part 1: Static strain test

Rubber, vulcanized or thermoplastic - Resistance toozone cracking Part 3: Reference and alternativemethods for determining the ozone concentration inlaboratory test chambers

Rubber, vulcanized or thermoplastic - Determinationof low temperature stiffening (Gehman test)

Road vehicles - Connectors for the electricalconnection of towing and towed vehicles - 13-poleconnectors for vehicles with 12 V nominal supplyvoltage

Guidelines for implementation of statistical processcontrol (SPC) Part 1: Elements of SPC

Determination of palladium in palladium jewelleryalloys - Gravimetric determination withdimethylglyoxime

Machinery for forestry - Tracked special machines -Performance criteria for brake systems

Non-destructive testing - Thermal neutronradiographic testing - General principles and basicrules

Caps for writing and marking instruments intendedfor use by children up to 14 years of age - Safetyrequirements

Small craft - Start-in-gear protection

Title

SANS 11290-2:1998/ISO 11290-2:1998, IDT, Ed. 1

SANS 11345:2003/ISO 11345:1997, IDT, Ed. 1

SANS 11346:2003/ISO 11346:1997, IDT, Ed. 1

SANS 11377:2003/ISO 11377:1997, IDT, Ed. 1

SANS 11378-2:2001/ISO 11378-2:2001, IDT, Ed. 1

SANS 11379:2003/ISO 11379:1997, IDT, Ed. 1

SANS 11407:2009/ISO 1407:1992, IDT, Ed. 2

SANS 11426:2008/ISO 11426:1997, IDT, Ed. 2

SANS 11427:1993/ISO 11427:1993, IDT, Ed. 1

SANS 11431-1:2003/ISO 1431-1:1989, IDT, Ed. 3

SANS 11431-3:2003/ISO 1431-3:2000, IDT, Ed. 1

SANS 11432:2003/ISO 1432:1988, IDT, Ed. 3

SANS 11446:2005/ISO 11446:2004, IDT, Ed. 3

SANS 11462-1:2009/ISO 11462-1:2001, IDT, Ed. 1

SANS 11490:1995/ISO 11490:1995, IDT, Ed. 1

SANS 11512:2003/ISO 11512:1995, IDT, Ed. 1

SANS 11537:2004/ISO 11537:1998, IDT, Ed. 1

SANS 11540:1993/ISO 11540:1993, IDT, Ed. 1

SANS 11547:2008/ISO 11547:1994, IDT, Ed. 1

SANS Number

(SABS ISO 11290-2)

(SABS ISO 11378-2)

(SABS ISO 11426)

(SABS ISO 11427)

(SABS ISO 11446)

(SABS ISO 11490)

(SABS ISO 11540)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

2

1

2

1

1

Edition

Founding - Austempered ductile cast irons

Information technology - User system interfaces andsymbols - Icon symbols and functions Part 1: Icons -General

Information technology - User system interfaces andsymbols - Icon symbols and functions Part 3: Pointericons

Small craft, engine-driven - Field of vision from helmposition

Small craft less than 8 m length of hull -Determination of maximum propulsion power rating

Wheeled fire extinguishers - Performance andconstruction

Packaging for terminally sterilized medical devicesPart 1: Requirements for materials, sterile barriersystems and packaging systems

Packaging for terminally sterilized medical devicesPart 2: Validation requirements for forming, sealingand assembly processes

Information and documentation - Libraryperformance indicators

Transportable gas cylinders - Periodic inspectionand testing of composite gas cylinders

Cranes - Measurement of the mass of a crane andits components

Cranes - Measurement of wheel alignment

Leather - Test for adhesion of finish

Statistical aspects of sampling from bulk materialsPart 1: General principles

Statistical aspects of sampling from bulk materialsPart 2: Sampling of particulate materials

Cranes - Access, guards and restraints Part 1:General

Cranes - Access, guards and restraints Part 2:Mobile cranes

Cranes - Access, guards and restraints Part 3:Tower cranes

Mobile cranes - Presentation of rated capacity charts

Mobile cranes - Experimental determination of craneperformance Part 1: Tipping loads and radii

Title

SANS 11564:2004/EN 1564:1997, IDT, Ed. 1



SANS 11591:2008/ISO 11591:2000, IDT, Ed. 1

SANS 11592:2008/ISO 11592:2001, IDT, Ed. 1

SANS 11601:2005/ISO 11601:1999, MOD, Ed. 1

SANS 11607-1:2007/ISO 11607-1:2006, IDT, Ed. 1

SANS 11607-2:2007/ISO 11607-2:2006, IDT, Ed. 1

SANS 11620:2009/ISO 11620:2008, IDT, Ed. 2

SANS 11623:2006/ISO 11623:2002, IDT, Ed. 1

SANS 11629:2007/ISO 11629:2004, IDT, Ed. 1

SANS 11630:2007/ISO 11630:1997, IDT, Ed. 1

SANS 11644:2009/ISO 11644:1993, IDT, Ed. 1

SANS 11648-1:2005/ISO 11648-1:2003, IDT, Ed. 1

SANS 11648-2:2005/ISO 11648-2:2001, IDT, Ed. 1

SANS 11660-1:2009/ISO 11660-1:2008, IDT, Ed. 2

SANS 11660-2:2007/ISO 11660-2:1994, IDT, Ed. 1

SANS 11660-3:2009/ISO 11660-3:2008, IDT, Ed. 2

SANS 11661:2007/ISO 11661:1998, IDT, Ed. 1

SANS 11662-1:2007/ISO 11662-1:1995, IDT, Ed. 1

SANS Number




October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

2

1

1

2

Edition

Plain bearings - Pedestal plain bearings Part 1:Pillow blocks

Plain bearings - Pedestal plain bearings Part 2: Sideflange bearings

Plain bearings - Pedestal plain bearings Part 3:Centre flange bearings

Acoustics - Recommended practice for the design oflow-noise machinery and equipment Part 1:Planning

Acoustics - Recommended practice for the design oflow-noise machinery and equipment Part 2:Introduction to the physics of low-noise design

Acoustics - Recommended practice for the design oflow-noise workplaces containing machinery Part 1:Noise control strategies

Acoustics - Recommended practice for the design oflow-noise workplaces containing machinery Part 2:Noise control measures

Acoustics - Recommended practice for the design oflow-noise workplaces containing machinery Part 3:Sound propagation and noise prediction inworkrooms

Non-destructive testing - Industrial radiographic filmsPart 1: Classification of film systems for industrialradiography

Non-destructive testing - Industrial radiographic filmsPart 2: Control of film processing by means ofreference values

Solid mineral fuels - Hard coal - Determination ofmoisture in the general analysis test sample bydrying in nitrogen

Solid mineral fuels - Determination of total fluorine incoal, coke and fly ash

Water quality - Detection and enumeration ofLegionella

Water quality - Detection and enumeration ofLegionella Part 2: Direct membrane filtration methodfor waters with low bacterial counts

Water quality - Determination of ammonium nitrogen- Method by flow analysis (CFA and FIA) andspectrometric detection

Classification of coals

Information technology - Security techniques - Keymanagement Part 1: Framework

Information Technology - Security techniques - Keymanagement Part 2: Mechanisms using symmetrictechniques

Title

SANS 11687-1:2005/ISO 11687-1:1995, IDT, Ed. 1

SANS 11687-2:2005/ISO 11687-2:1995, IDT, Ed. 1

SANS 11687-3:2005/ISO 11687-3:1995, IDT, Ed. 1

SANS 11688-1:1995/ISO/TR 11688-1:1995, IDT, Ed.1

SANS 11688-2:1998/ISO/TR 11688-2:1998, IDT, Ed.1

SANS 11690-1:1996/ISO 11690-1:1996, IDT, Ed. 1

SANS 11690-2:1996/ISO 11690-2:1996, IDT, Ed. 1

SANS 11690-3:1997/ISO/TR 11690-3:1997, IDT, Ed.1

SANS 11699-1:2005/ISO 11699-1:1998, IDT, Ed. 1

SANS 11699-2:2005/ISO 11699-2:1998, IDT, Ed. 1

SANS 11722:2005/ISO 11722:1999, IDT, Ed. 1

SANS 11724:2007/ISO 11724:2004, IDT, Ed. 1

SANS 11731:2008/ISO 11731:1998, IDT, Ed. 1

SANS 11731-2:2009/ISO 11731-2:2004, IDT, Ed. 1

SANS 11732:2006/ISO 11732:2005, IDT, Ed. 2

SANS 11760:2007/ISO 11760:2005, IDT, Ed. 1



SANS Number

(SABS ISO/TR 11688-1)


(SABS ISO 11690-1)

(SABS ISO 11690-2)


(SABS ISO 11732)


October 2009

1

1

1

1

2.01

1

1

1

1

1

1

1

1

1

1

1

1

2

1

Edition

Information technology - Security techniques - Keymanagement Part 3: Mechanisms using asymmetrictechniques

Information technology - Security techniques - Keymanagement Part 4: Mechanisms based on weaksecrets

Information and documentation - Permanence anddurability of writing, printing and copying on paper -Requirements and test methods

Information and documentation - Document storagerequirements for archive and library materials

Information technology - Generic cabling forcustomer premises

Small craft - Watertight cockpits and quick-drainingcockpits

Rubber, vulcanized - Determination of the effect ofliquids

Reaction to fire tests for building products - Non-combustibility test

Capability of detection Part 1: Terms and definitions

Capability of detection Part 2: Methodology in thelinear calibration case

Capability of detection Part 3: Methodology fordetermination of the critical value for the responsevariable when no calibration data are used

Capability of detection Part 4: Methodology forcomparing the minimum detectable value with agiven value

Capability of detection Part 5: Methodology in thelinear and non-linear calibration cases

Machinery for forestry - Self-propelled machinery -Safety requirements

Conducting and dissipative rubbers, vulcanized orthermoplastic - Measurement of resistivity

Textile floor coverings - Determination of resistanceto delamination

Milk and milk products - Determination of fat content- General guidance on the use of butyrometricmethods

Water quality - Determination of selected elementsby inductively coupled plasma optical emissionspectrometry (ICP-OES)

Paints and varnishes - Determination of volatileorganic compound (VOC) content Part 1: Differencemethod

Title


SANS 11770-4:2007/ISO/IEC 11770-4:2006, IDT,Ed. 1

SANS 11798:2006/ISO 11798:1999, IDT, Ed. 1

SANS 11799:2005/ISO 11799:2003, IDT, Ed. 1

SANS 11801:2008/ISO/IEC 11801:2008, IDT, Ed. 2.1

SANS 11812:2008/ISO 11812:2001, IDT, Ed. 1

SANS 11817:2003/ISO 1817:1999, IDT, Ed. 3

SANS 11820:2008/ISO 1182:2002, IDT, Ed. 4

SANS 11843-1:2009/ISO 11843-1:1997, IDT, Ed. 1

SANS 11843-2:2009/ISO 11843-2:2000, IDT, Ed. 1

SANS 11843-3:2009/ISO 11843-3:2003, IDT, Ed. 1

SANS 11843-4:2009/ISO 11843-4:2003, IDT, Ed. 1

SANS 11843-5:2009/ISO 11843-5:2008, IDT, Ed. 1

SANS 11850:2003/ISO 11850:2003, IDT, Ed. 2

SANS 11853:2003/ISO 1853:1998, IDT, Ed. 2

SANS 11857:1999/ISO 11857:1999, IDT, Ed. 1

SANS 11870:2005/ISO 11870:2000, IDT, Ed. 1

SANS 11885:2008/ISO 11885:2007, IDT, Ed. 2

SANS 11890-1:2004/ISO 11890-1:2000, IDT, Ed. 1

SANS Number

(SABS ISO/IEC 11801)

(SABS ISO 11857)

(SABS ISO 11885)


October 2009

1

1

1

1

1

1

1

1

2

1

1

1

1

1

1

2

2

2

1

Edition

Paints and varnishes - Determination of volatileorganic compound (VOC) content Part 2: Gas-chromatographic method

Tools for pressing - Guide pillar mountings

Thermoplastics pipes for the conveyance of fluids -Dimensions and tolerances Part 1: Metric series

Cranes - Availability - Vocabulary

Metallic materials - Guidelines for the determinationof forming-limit diagrams

Electronic imaging - Forms design optimization forelectronic image management

Rolling bearings - Single-row cylindrical rollerbearings - Chamfer dimensions for loose rib andnon-rib sides

Rolling bearings - Single-row angular contact ballbearings - Chamfer dimensions for outer ring non-thrust side

Road vehicles - Connectors for the electricalconnection of towing and towed vehicles - 15-poleconnector for vehicles with 24 V nominal supplyvoltage

Plastics piping systems - Injection-mouldedthermoplastics fittings, valves and ancillaryequipment - Determination of the long-termhydrostatic strength of thermoplastics materials forinjection moulding of piping components

Plain bearings - Lubrication holes, grooves andpockets - Dimensions, types, designation and theirapplication to bearing bushes

Plain bearings Part 1: Fits

Plain bearings Part 2: Tolerances on form andposition and surface roughness for shafts, flangesand thrust collars

Electronic imaging - Media error monitoring andreporting techniques for verification of stored dataon optical digital data disks

Gas welding equipment - Thermoplastic hoses forwelding and allied processes

Chemicals used for treatment of water intended forhuman consumption - Sodium fluoride

Chemicals used for treatment of water intended forhuman consumption - Sodium hexafluorosilicate

Chemicals used for treatment of water intended forhuman consumption - Hexafluorosilicic acid

Alphabetical ordering of multilingual terminologicaland lexicographical data represented in the Latinalphabet

Title

SANS 11890-2:2004/ISO 11890-2:2000, IDT, Ed. 1

SANS 11903:2006/ISO 11903:1996, IDT, Ed. 1

SANS 11922-1:1997/ISO 11922-1:1997, IDT, Ed. 1

SANS 11994:2008/ISO 11994:1997, IDT, Ed. 1

SANS 12004:1997/ISO 12004:1997, IDT, Ed. 1

SANS 12029:2007/ISO/TS 12029:2007, IDT, Ed. 2

SANS 12043:2006/ISO 12043:1995, IDT, Ed. 1

SANS 12044:2006/ISO 12044:1995, IDT, Ed. 1

SANS 12098:2005/ISO 12098:2004, IDT, Ed. 2

SANS 12107:2003/EN 12107:1997, IDT, Ed. 1

SANS 12128:2006/ISO 12128:2001, IDT, Ed. 2

SANS 12129-1:2006/ISO 12129-1:1995, IDT, Ed. 1

SANS 12129-2:2006/ISO 12129-2:1995, IDT, Ed. 1

SANS 12142:2006/ISO 12142:2001, IDT, Ed. 1

SANS 12170:2004/ISO 12170:1996, IDT, Ed. 1

SANS 12173:2007/EN 12173:2005, IDT, Ed. 2

SANS 12174:2007/EN 12174:2006, IDT, Ed. 2

SANS 12175:2007/EN 12175:2006, IDT, Ed. 2

SANS 12199:2008/ISO 12199:2000, IDT, Ed. 1

SANS Number

(SABS ISO 11922-1)

(SABS ISO 12004)

(SABS ISO 12098)

(SABS EN 12173)

(SABS EN 12174)

(SABS EN 12175)


October 2009

1

2

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Computer applications in terminology - Machine-readable terminology interchange format (MARTIF) -Negotiated interchange

Systems and software engineering - Software lifecycle processes

Small craft - Hull construction and scantlings Part 1:Materials: Thermosetting resins, glass-fibrereinforcement, reference laminate

Small craft - Hull construction and scantlings Part 2:Materials: Core materials for sandwich construction,embedded materials

Small craft - Hull construction and scantlings Part 3:Materials: Steel, aluminium alloys, wood, othermaterials

Small craft - Hull construction and scantlings Part 4:Workshop and manufacturing

Small craft - Hull construction and scantlings Part 5:Design pressures for monohulls, design stresses,scantlings determination

Small craft - Hull construction and scantlings Part 6:Structural arrangements and details

Small craft - Windows, portlights, hatches,deadlights and doors - Strength and watertightnessrequirements

Small craft - Stability and buoyancy assessment andcategorization Part 1: Non-sailing boats of hulllength greater than or equal to 6 m

Small craft - Stability and buoyancy assessment andcategorization Part 2: Sailing boats of hull lengthgreater than or equal to 6 m

Small craft - Stability and buoyancy assessment andcategorization Part 3: Boats of hull length less than6 m

Spherical plain bearings Part 1: Radial sphericalplain bearings

Spherical plain bearings Part 2: Angular contactradial spherical plain bearings

Spherical plain bearings Part 3: Thrust sphericalplain bearings

Spherical plain bearings Part 4: Spherical plainbearing rod ends

Mountaineering equipment - Harnesses - Safetyrequirements and test methods

Printing and business paper - Requirements forcopy paper for dry toner imaging processes

Plastics piping systems - Thermoplastics pipes andfittings for hot and cold water - Test method for theresistance of mounted assemblies to temperaturecycling

Title

SANS 12200:2008/ISO 12200:1999, IDT, Ed. 1


SANS 12215-1:2008/ISO 12215-1:2000, IDT, Ed. 1

SANS 12215-2:2008/ISO 12215-2:2002, IDT, Ed. 1

SANS 12215-3:2008/ISO 12215-3:2002, IDT, Ed. 1

SANS 12215-4:2008/ISO 12215-4:2002, IDT, Ed. 1

SANS 12215-5:2009/ISO 12215-5:2008, IDT, Ed. 1

SANS 12215-6:2009/ISO 12215-6:2008, IDT, Ed. 1

SANS 12216:2008/ISO 12216:2002, IDT, Ed. 1

SANS 12217-1:2008/ISO 12217-1:2002, IDT, Ed. 1

SANS 12217-2:2008/ISO 12217-2:2002, IDT, Ed. 1

SANS 12217-3:2008/ISO 12217-3:2002, IDT, Ed. 1

SANS 12240-1:2005/ISO 12240-1:1998, IDT, Ed. 1

SANS 12240-2:2006/ISO 12240-2:1998, IDT, Ed. 1

SANS 12240-3:2005/ISO 12240-3:1998, IDT, Ed. 1

SANS 12240-4:2005/ISO 12240-4:1998, IDT, Ed. 1

SANS 12277:1998/EN 12277:1998, IDT, Ed. 1

SANS 12281:2005/EN 12281:2002, IDT, Ed. 1

SANS 12293:1999/EN 12293:1999, IDT, Ed. 1

SANS Number


(SABS EN 12277)

(SABS EN 12293)


October 2009

1

1

1

1

1

1

1

2

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Plastics piping systems - Systems for hot and coldwater - Test method for leaktightness under vacuum

Plastics piping systems - Thermoplastics pipes andassociated fittings for hot and cold water - Testmethod for resistance of joints to pressure cycling

Plain bearings - Quality control techniques andinspection of geometrical and material qualitycharacteristics

Plain bearings - Quality characteristics - Statisticalprocess control (SPC)

Plain bearings - Measurement of wall thickness ofthin-walled half-bearings and thin-walled bushes

Plain bearings - Wrapped bushes Part 1: Checkingthe outside diameter

Plain bearings - Quality assurance - Sample types -Definitions, applications and testing

Chemical disinfectants and antiseptics -Preservation of test organisms used for thedetermination of bactericidal, mycobactericidal,sporicidal and fungicidal activity

Small craft - Deck safety harness and safety line foruse on recreational craft - Safety requirements andtest methods

Personal flotation devices Part 1: Lifejackets forseagoing ships - Safety requirements

Personal flotation devices Part 2: Lifejackets,performance level 275 - Safety requirements



Personal flotation devices Part 5: Buoyancy aids(level 50) - Safety requirements

Personal flotation devices Part 6: Special purposelifejackets and buoyancy aids - Safety requirementsand additional test methods

Personal flotation devices Part 7: Materials andcomponents - Safety requirements and test methods

Personal flotation devices Part 8: Accessories -Safety requirements and test methods

Personal flotation devices Part 9: Test methods

Personal flotation devices Part 10: Selection andapplication of personal flotation devices and otherrelevant devices

Biotechnology - Performance criteria formicrobiological safety cabinets

Title

SANS 12294:1999/EN 12294:1999, IDT, Ed. 1

SANS 12295:1999/EN 12295:1999, IDT, Ed. 1

SANS 12301:2005/ISO 12301:1992, IDT, Ed. 1

SANS 12302:2005/ISO 12302:1993, IDT, Ed. 1

SANS 12306:2005/ISO 12306:1994, IDT, Ed. 1

SANS 12307-1:2006/ISO 12307-1:1994, IDT, Ed. 1

SANS 12308:2005/ISO 12308:1994, IDT, Ed. 1

SANS 12353:2008/EN 12353:2006, IDT, Ed. 2

SANS 12401:2008/ISO 12401:2004, IDT, Ed. 1

SANS 12402-1:2007/ISO 12402-1:2005, IDT, Ed. 1

SANS 12402-2:2007/ISO 12402-2:2006, IDT, Ed. 1

SANS 12402-3:2007/ISO 12402-3:2006, IDT, Ed. 1

SANS 12402-4:2007/ISO 12402-4:2006, IDT, Ed. 1

SANS 12402-5:2007/ISO 12402-5:2006, IDT, Ed. 1

SANS 12402-6:2007/ISO 12402-6:2006, IDT, Ed. 1

SANS 12402-7:2007/ISO 12402-7:2006, IDT, Ed. 1

SANS 12402-8:2007/ISO 12402-8:2006, IDT, Ed. 1

SANS 12402-9:2007/ISO 12402-9:2006, IDT, Ed. 1

SANS 12402-10:2007/ISO 12402-10:2006, IDT, Ed. 1

SANS 12469:2002/EN 12469:2000, IDT, Ed. 1

SANS Number

(SABS EN 12294)

(SABS EN 12295)

(SABS EN 12353)


October 2009

1

1

1

1

1

1

2

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Cranes - Maintenance manual Part 1: General

Cranes - Safe use Part 1: General

Cranes - Safe use Part 3: Tower cranes

Cranes - Condition monitoring Part 1: General

Tower cranes - Stability requirements

Cranes - Tolerances for wheels and travel andtraversing tracks Part 1: General

Earth-moving machinery - Lighting, signalling andmarking lights, and reflex-reflector devices

Bibliographic references and source identifiers forterminology work

Translation-oriented terminography

Computer applications in terminology - Datacategories

Electronic imaging - Vocabulary

Electronic imaging - Test target for the black-and-white scanning of office documents Part 1:Characteristics

Electronic imaging - Test target for the black-and-white scanning of office documents Part 2: Methodof use

Non-destructive testing - Ultrasonic inspection -Evaluating electronic characteristics of ultrasonictest instruments

Ultrasonic non-destructive testing - Referenceblocks and test procedures for the characterizationof contact search unit beam profiles

Non-destructive testing - Acoustic emissioninspection - Vocabulary

Non-destructive testing - Thermal neutronradiographic testing - Determination of beam L/Dratio

Drawing and writing instruments - Ball point pensand roller ball pens - Vocabulary

Nanotechnologies - Health and safety practices inoccupational settings relevant to nanotechnologies

Solid mineral fuels - Determination of total carbon,hydrogen and nitrogen - Instrumental methods

Title

SANS 12478-1:2006/ISO 12478-1:1997, IDT, Ed. 1

SANS 12480-1:2006/ISO 12480-1:1997, IDT, Ed. 1

SANS 12480-3:2007/ISO 12480-3:2005, IDT, Ed. 1

SANS 12482-1:2008/ISO 12482-1:1995, IDT, Ed. 1

SANS 12485:2007/ISO 12485:1998, IDT, Ed. 1

SANS 12488-1:2007/ISO 12488-1:2005, IDT, Ed. 1

SANS 12509:2008/ISO 12509:2004, IDT, Ed. 2

SANS 12615:2008/ISO 12615:2004, IDT, Ed. 1

SANS 12616:2004/ISO 12616:2002, IDT, Ed. 1

SANS 12620:2008/ISO 12620:1999, IDT, Ed. 1

SANS 12651:2005/ISO 12651:1999, IDT, Ed. 1

SANS 12653-1:2006/ISO 12653-1:2000, IDT, Ed. 1

SANS 12653-2:2006/ISO 12653-2:2000, IDT, Ed. 1

SANS 12710:2003/ISO 12710:2002, IDT, Ed. 1

SANS 12715:2004/ISO 12715:1999, IDT, Ed. 1

SANS 12716:2004/ISO 12716:2001, IDT, Ed. 1

SANS 12721:2004/ISO 12721:2000, IDT, Ed. 1

SANS 12756:2009/ISO 12756:1998, IDT, Ed. 1

SANS 12885:2009/ISO/TR 12885:2008, IDT, Ed. 1

SANS 12902:2007/ISO/TS 12902:2001, IDT, Ed. 1

SANS Number


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Respiratory protective devices - Powered filteringdevices incorporating a helmet or a hood -Requirements, testing, marking

Respiratory protective devices - Power assistedfiltering devices incorporating full face masks, halfmasks or quarter masks - Requirements, testing,marking

Paints and varnishes - Corrosion protection of steelstructures by protective paint systems Part 1:General introduction

Paints and varnishes - Corrosion protection of steelstructures by protective paint systems Part 2:Classification of environments

Paints and varnishes - Corrosion protection of steelstructures by protective paint systems Part 3: Designconsiderations

Paints and varnishes - Corrosion protection of steelstructures by protective paint systems Part 4: Typesof surface and surface preparation

Paints and varnishes - Corrosion protection of steelstructures by protective paint systems Part 5:Protective paint systems

Paints and varnishes - Corrosion protection of steelstructures by protective paint systems Part 6:Laboratory performance test methods

Paints and varnishes - Corrosion protection of steelstructures by protective paint systems Part 7:Execution and supervision of paint work

Paints and varnishes - Corrosion protection of steelstructures by protective paint systems Part 8:Development of specifications for new work andmaintenance

Textile floor coverings - Determination of mass lossusing the Lisson test

Ceramic tiles - Definitions, classification,characteristics and marking

Cranes - Measurement of velocity and timeparameters

Chains, sprockets and accessories - List ofequivalent terms

Ducted air-conditioners and air-to-air heat pumps -Testing and rating for performance

Small craft - Electrical systems - Alternating currentinstallations

Sensory analysis - Methods for assessingmodifications to the flavour of foodstuffs due topackaging

Information technology - Security techniques -Management of information and communicationstechnology security Part 1: Concepts and models forinformation and communications technology securitymanagement

Title

SANS 12941:1998/EN 12941:1998, IDT, Ed. 1

SANS 12942:1998/EN 12942:1998, IDT, Ed. 1

SANS 12944-1:1998/ISO 12944-1:1998, IDT, Ed. 1

SANS 12944-2:1998/ISO 12944-2:1998, IDT, Ed. 1

SANS 12944-3:1998/ISO 12944-3:1998, IDT, Ed. 1

SANS 12944-4:1998/ISO 12944-4:1998, IDT, Ed. 1

SANS 12944-5:1998/ISO 12944-5:1998, IDT, Ed. 1

SANS 12944-6:1998/ISO 12944-6:1998, IDT, Ed. 1

SANS 12944-7:1998/ISO 12944-7:1998, IDT, Ed. 1

SANS 12944-8:1998/ISO 12944-8:1998, IDT, Ed. 1

SANS 12951:2004/ISO 12951:1999, IDT, Ed. 1

SANS 13006:2003/ISO 13006:1998, IDT, Ed. 1

SANS 13202:2007/ISO 13202:2003, IDT, Ed. 1

SANS 13203:2007/ISO 13203:2005, IDT, Ed. 1

SANS 13253:2003/ISO 13253:1995, IDT, Ed. 1

SANS 13297:2008/ISO 13297:2000, IDT, Ed. 2

SANS 13302:2008/ISO 13302:2003, IDT, Ed. 1


SANS Number

(SABS EN 12941)

(SABS EN 12942)

(SABS ISO 12944-1)

(SABS ISO 12944-2)

(SABS ISO 12944-3)

(SABS ISO 12944-4)

(SABS ISO 12944-5)

(SABS ISO 12944-6)

(SABS ISO 12944-7)

(SABS ISO 12944-8)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

3

Edition

Information technology - Guidelines for themanagement of IT security Part 3: Techniques forthe management of IT Security

Information technology - Guidelines for themanagement of IT security Part 4: Selection ofsafeguards

Information technology - Guidelines for themanagement of IT security Part 5: Managementguidance on network security

Small craft - Static thrust measurement for outboardmotors

Water quality - Determination of nitrite nitrogen andnitrate nitrogen and the sum of both by flow analysis(CFA and FIA) and spectrometric detection

Guidelines for the selection of statistical methods instandardization and specification

Acoustics - Impulse sound propagation forenvironmental noise assessment

Acoustics - Stationary audible warning devices usedoutdoors Part 1: Field measurements fordetermination of sound emission quantities

Medical devices - Quality management systems -Requirements for regulatory purposes

Statistical methods for use in proficiency testing byinterlaboratory comparisons

Single side loading fork-lift trucks Part 1: Stabilitytests

Single side loading fork-lift trucks Part 2: Additionalstability tests for trucks handling freight containers of6 m length and above

Small craft - Personal watercraft - Construction andsystem installation requirements

Small craft - Portable fuel systems for outboardmotors

Small craft - Backfire flame control for petrol engines

Petroleum and natural gas industries - Packagedreciprocating gas compressors

Textile floor coverings - Guidelines for installationand use on stairs

Plastics pipes for the conveyance of fluids underpressure - Miner's rule - Calculation method forcumulative damage

Information technology - Generic coding of movingpictures and associated audio information: Systems

Title




SANS 13342:2008/ISO 13342:1995, IDT, Ed. 1

SANS 13395:1996/ISO 13395:1996, IDT, Ed. 1

SANS 13425:2005/ISO/TR 13425:2003, IDT, Ed. 2

SANS 13474:2005/ISO/TS 13474:2003, IDT, Ed. 1

SANS 13475-1:1999/ISO 13475-1:1999, IDT, Ed. 1

SANS 13485:2004/ISO 13485:2003, IDT, Ed. 2

SANS 13528:2009/ISO 13528:2005, IDT, Ed. 1

SANS 13563-1:2007/ISO 13563-1:2001, IDT, Ed. 1

SANS 13563-2:2007/ISO 13563-2:2001, IDT, Ed. 1

SANS 13590:2008/ISO 13590:2003, IDT, Ed. 2

SANS 13591:2008/ISO 13591:1997, IDT, Ed. 1

SANS 13592:2008/ISO 13592:1998, IDT, Ed. 1

SANS 13631:2003/ISO 13631:2002, IDT, Ed. 1

SANS 13746:2000/ISO 13746:2000, IDT, Ed. 1

SANS 13760:1998/ISO 13760:1998, IDT, Ed. 1


SANS Number

(SABS ISO 13395)

(SABS ISO 13475-1)

(SABS ISO 13746)

(SABS ISO 13760)



October 2009

2

2

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Information technology - Generic coding of movingpictures and associated audio information: Video

Information technology - Generic coding of movingpictures and associated audio information Part 3:Audio

Water quality - Guidance on validation ofmicrobiological methods

IT security techniques - Non-repudiation Part 1:General

Information technology - Security techniques - Non-repudiation Part 2: Mechanisms using symmetrictechniques

Information technology - Security techniques - Non-repudiation Part 3: Mechanisms using asymmetrictechniques

Hard coal and coke - Mechanical sampling Part 1:General introduction

Hard coal and coke - Mechanical sampling Part 2:Coal - Sampling from moving streams

Hard coal and coke - Mechanical sampling Part 3:Coal - Sampling from stationary lots

Hard coal and coke - Mechanical sampling Part 4:Coal - Preparation of test samples

Hard coal and coke - Mechanical sampling Part 5:Coke - Sampling from moving streams

Hard coal and coke - Mechanical sampling Part 6:Coke - Preparation of test samples

Hard coal and coke - Mechanical sampling Part 7:Methods for determining the precision of sampling,sample preparation and testing

Hard coal and coke - Mechanical sampling Part 8:Methods of testing for bias

Small craft - Steering gear - Geared link systems

Textiles - Tensile properties of fabrics Part 1:Determination of maximum force and elongation atmaximum force using the strip method

Textiles - Tensile properties of fabrics Part 2:Determination of maximum force using the grabmethod

Textiles - Tear properties of fabrics Part 3:Determination of tear force of wing-shaped testspecimens (Single tear method)

Textiles - Tear properties of fabrics Part 4:Determination of tear force of tongue-shaped testspecimens (Double tear test)

Title



SANS 13843:2004/ISO/TR 13843:2000, IDT, Ed. 1




SANS 13909-1:2001/ISO 13909-1:2001, IDT, Ed. 1

SANS 13909-2:2001/ISO 13909-2:2001, IDT, Ed. 1

SANS 13909-3:2002/ISO 13909-3:2001, IDT, Ed. 1

SANS 13909-4:2002/ISO 13909-4:2001, IDT, Ed. 1

SANS 13909-5:2001/ISO 13909-5:2001, IDT, Ed. 1

SANS 13909-6:2001/ISO 13909-6:2001, IDT, Ed. 1

SANS 13909-7:2001/ISO 13909-7:2001, IDT, Ed. 1

SANS 13909-8:2001/ISO 13909-8:2001, IDT, Ed. 1

SANS 13929:2008/ISO 13929:2001, IDT, Ed. 1

SANS 13934-1:1999/ISO 13934-1:1999, IDT, Ed. 1

SANS 13934-2:2008/ISO 13934-2:1999, IDT, Ed. 1

SANS 13937-3:2007/ISO 13937-3:2000, IDT, Ed. 1

SANS 13937-4:2007/ISO 13937-4:2000, IDT, Ed. 1

SANS Number



(SABS ISO 13909-1)

(SABS ISO 13909-2)

(SABS ISO 13909-3)

(SABS ISO 13909-4)

(SABS ISO 13909-5)

(SABS ISO 13909-6)

(SABS ISO 13909-7)

(SABS ISO 13909-8)

(SABS ISO 13934-1)


October 2009

1

1

2

2

1

2

1

1

1

1

2

1

1

1

1

1

1

1

3

1

Edition

Textiles - Bursting properties of fabrics Part 1:Hydraulic method for determination of burstingstrength and bursting distension

Air quality - Determination of ozone in ambient air -Ultraviolet photometric method

Environmental management systems -Requirements with guidance for use

Environmental management systems - Generalguidelines on principles, systems and supporttechniques

Environmental management - Environmentalassessment of sites and organizations (EASO)

Environmental labels and declarations - Generalprinciples

Environmental labels and declarations - Self-declared environmental claims (Type IIenvironmental labelling)

Environmental labels and declarations - Type Ienvironmental labelling - Principles and procedures

Environmental labels and declarations - Type IIIenvironmental declarations - Principles andprocedures

Environmental management - Environmentalperformance evaluation - Guidelines

Environmental management - Life cycle assessment- Principles and framework

Environmental management - Life cycle assessment- Goal and scope definition and inventory analysis

Environmental management - Life cycle assessment- Life cycle impact assessment

Environmental management - Life cycle assessment- Life cycle interpretation

Environmental management - Life cycle assessment- Requirements and guidelines

Environmental management - Life cycle impactassessment - Examples of application of SANS14042

Environmental management - Life cycle assessment- Data documentation format

Environmental management - Life cycle assessment- Examples of application of ISO 14041 to goal andscope definition and inventory analysis

Environmental management - Vocabulary

Environmental management - Integratingenvironmental aspects into product design anddevelopment

Title

SANS 13938-1:1999/ISO 13938-1:1999, IDT, Ed. 1

SANS 13964:2004/ISO 13964:1998, IDT, Ed. 1

SANS 14001:2005/ISO 14001:2004, IDT, Ed. 2

SANS 14004:2005/ISO 14004:2004, IDT, Ed. 2

SANS 14015:2003/ISO 14015:2001, IDT, Ed. 1

SANS 14020:2003/ISO 14020:2000, IDT, Ed. 2

SANS 14021:1999/ISO 14021:1999, IDT, Ed. 1

SANS 14024:1999/ISO 14024:1999, IDT, Ed. 1

SANS 14025:2006/ISO 14025:2006, IDT, Ed. 1

SANS 14031:1999/ISO 14031:1999, IDT, Ed. 1

SANS 14040:2006/ISO 14040:2006, IDT, Ed. 2

SANS 14041:1998/ISO 14041:1998, IDT, Ed. 1

SANS 14042:2000/ISO 14042:2000, IDT, Ed. 1

SANS 14043:2000/ISO 14043:2000, IDT, Ed. 1

SANS 14044:2006/ISO 14044:2006, IDT, Ed. 1

SANS 14047:2005/ISO/TR 14047:2003, IDT, Ed. 1

SANS 14048:2003/ISO/TS 14048:2002, IDT, Ed. 1

SANS 14049:2003/ISO/TR 14049:2000, IDT, Ed. 1

SANS 14050:2009/ISO 14050:2009, IDT, Ed. 3

SANS 14062:2005/ISO/TR 14062:2002, IDT, Ed. 1

SANS Number

(SABS ISO 13938-1)

(SABS ISO 14001)

(SABS ISO 14004)

(SABS ISO 14020)

(SABS ISO 14021)

(SABS ISO 14024)

(SABS ISO 14031)

(SABS ISO 14040)

(SABS ISO 14041)

(SABS ISO 14042)

(SABS ISO 14043)

(SABS ISO 14050)


October 2009

1

1

1

1

1

2

1

2

1

1

1

1

1

1

1

1

1

Edition

Environmental management - Environmentalcommunication - Guidelines and examples

Greenhouse gases Part 1: Specification withguidance at the organization level for quantificationand reporting of greenhouse gas emissions andremovals

Greenhouse gases Part 2: Specification withguidance at the project level for quantification,monitoring and reporting of greenhouse gasemission, reductions or removal enhancements

Greenhouse gases Part 3: Specification withguidance for the validation and verification ofgreenhouse gas assertions

Greenhouse gases - Requirements for greenhousegas validation and verification bodies for use inaccreditation or other forms of recognition

Information technology - Guideline for the evaluationand selection of CASE tools

Gas welding equipment - Rubber and plastic hosesassembled for compressed or liquefied gases up toa maximum design pressure of 450 bar

Information technology - Software measurement -Functional size measurement Part 1: Definition ofconcepts

Information Technology - Software measurement -Functional size measurement Part 2: Conformityevaluation of software size measurement methodsto ISO/IEC 14143-1:1998

Information technology - Software measurement -Functional size measurement Part 3: Verification offunctional size measurement methods

Information Technology - Software measurement -Functional size measurement Part 4: Referencemodel

Information technology - Software measurement -Functional size measurement Part 5: Determinationof functional domains for use with functional sizemeasurement

Information technology - Software measurement -Functional size measurement Part 6: Guide for useof ISO/IEC 14143 series and related internationalstandards

Safety of machinery - Hygiene requirements for thedesign of machinery

Solid mineral fuels - Guidance on the sampling ofcoal seams

Small craft - Magnetic compasses

Plastics pipes and fittings - Mechanical-jointcompression fittings for use with polyethylenepressure pipes in water supply systems

Title

SANS 14063:2006/ISO 14063:2006, IDT, Ed. 1

SANS 14064-1:2006/ISO 14064-1:2006, IDT, Ed. 1

SANS 14064-2:2006/ISO 14064-2:2006, IDT, Ed. 1

SANS 14064-3:2006/ISO 14064-3:2006, IDT, Ed. 1

SANS 14065:2007/ISO 14065:2007, IDT, Ed. 1


SANS 14113:2004/ISO 14113:1997, IDT, Ed. 1







SANS 14159:2006/ISO 14159:2002, IDT, Ed. 1

SANS 14180:1998/ISO 14180:1998, IDT, Ed. 1

SANS 14227:2008/ISO 14227:2001, IDT, Ed. 1

SANS 14236:2003/ISO 14236:2000, IDT, Ed. 1

SANS Number



(SABS ISO 14180)


October 2009

1

1

1

1

1

1

1

1

2

1

1

1

1

2

2

1

2

2

Edition

Welding consumables - Wire electrodes anddeposits for gas shielded metal arc welding of nonalloy and fine grain steels - Classification

Dentistry - Duplicating material

Water quality - Determination of total cyanide andfree cyanide by continuous flow analysis

Information and documentation - Requirements forbinding of books, periodicals, serials and otherpaper documents for archive and library use -Methods and materials

Identification cards - Contactless integrated circuit(s)cards - Proximity cards Part 1: Physicalcharacteristics

Identification cards - Contactless integrated circuit(s)cards - Proximity cards Part 2: Radio frequencypower and signal interface

Identification cards - Contactless integrated circuit(s)cards - Proximity cards Part 3: Initialization andanticollision

Identification cards - Contactless integrated circuit(s)cards - Proximity cards Part 4: Transmissionprotocol

Information technology - Software engineering -Guidelines for the adoption of CASE tools

Small craft - Measurement of airborne sound emittedby powered recreational craft

Small craft - Airborne sound emitted by poweredrecreational craft Part 1: Pass-by measurementprocedures

Information technology - Security techniques -Guidelines for the use and management of TrustedThird Party services

Cranes - Requirements for test loads

Gaseous fire-extinguishing systems - Physicalproperties and system design Part 1: Generalrequirements

Gaseous fire-extinguishing systems - Physicalproperties and system design Part 2: CF3Iextinguishant

Gaseous fire-extinguishing systems - Physicalproperties and system design Part 5: FK-5-1-12extinguishant

Gaseous fire-extinguishing systems - Physicalproperties and system design Part 6: HCFC blend Aextinguishant

Gaseous fire-extinguishing systems - Physicalproperties and system design Part 8: HFC 125extinguishant

Title

SANS 14341:2009/ISO 14341:2002, IDT, Ed. 1

SANS 14356:2008/ISO 14356:2003, IDT, Ed. 1

SANS 14403:2002/ISO 14403:2002, IDT, Ed. 1

SANS 14416:2005/ISO 14416:2003, IDT, Ed. 1





SANS 14471:2009/ISO/IEC TR 14471:2007, IDT, Ed.2

SANS 14509:2008/ISO 14509:2000, IDT, Ed. 1

SANS 14509-1:2009/ISO 14509-1:2008, IDT, Ed. 1


SANS 14518:2008/ISO 14518:2005, IDT, Ed. 1

SANS 14520-1:2008/ISO 14520-1:2006, IDT, Ed. 2

SANS 14520-2:2008/ISO 14520-2:2006, IDT, Ed. 2

SANS 14520-5:2008/ISO 14520-5:2006, IDT, Ed. 1

SANS 14520-6:2008/ISO 14520-6:2006, IDT, Ed. 2

SANS 14520-8:2008/ISO 14520-8:2006, IDT, Ed. 2

SANS Number



(SABS ISO 14520-1)

(SABS ISO 14520-2)

(SABS ISO 14520-6)

(SABS ISO 14520-8)


October 2009

2

2

2

2

2

2

2

1

1

1

1

1

1

1

1

1

1

1

Edition

Gaseous fire-extinguishing systems - Physicalproperties and system design Part 9: HFC 227eaextinguishant

Gaseous fire-extinguishing systems - Physicalproperties and system design Part 10: HFC 23extinguishant

Gaseous fire-extinguishing systems - Physicalproperties and system design Part 11: HFC 236faextinguishant

Gaseous fire-extinguishing systems - Physicalproperties and system design Part 12: IG-01extinguishant




Fire-fighting hoses - Rubber and plastics suctionhoses and hose assemblies

Acceptance sampling procedures by attributes -Specified quality levels in nonconfirming items permillion

Information technology - Software productevaluation Part 1: General overview

Software engineering - Product evaluation Part 2:Planning and management

Software engineering - Product evaluation Part 3:Process for developers

Software engineering - Product evaluation Part 4:Process for acquirers

Information technology - Software productevaluation Part 5: Process for evaluators

Software engineering - Product evaluation Part 6:Documentation of evaluation modules

Cleanrooms and associated controlled environmentsPart 1: Classification of air cleanliness

Cleanrooms and associated controlled environmentsPart 2: Specifications for testing and monitoring toprove continued compliance with ISO 14644-1

Cleanrooms and associated controlled environmentsPart 4: Design, construction and start-up

Title

SANS 14520-9:2008/ISO 14520-9:2006, IDT, Ed. 2

SANS 14520-10:2008/ISO 14520-10:2005, IDT, Ed. 2

SANS 14520-11:2008/ISO 14520-11:2005, IDT, Ed. 2

SANS 14520-12:2008/ISO 14520-12:2005, IDT, Ed. 2

SANS 14520-13:2008/ISO 14520-13:2005, IDT, Ed. 2

SANS 14520-14:2008/ISO 14520-14:2005, IDT, Ed. 2

SANS 14520-15:2008/ISO 14520-15:2005, IDT, Ed. 2

SANS 14557:2007/ISO 14557:2002, IDT, Ed. 1

SANS 14560:2009/ISO 14560:2004, IDT, Ed. 1







SANS 14644-1:1999/ISO 14644-1:1999, IDT, Ed. 1

SANS 14644-2:2003/ISO 14644-2:2000, IDT, Ed. 1

SANS 14644-4:2003/ISO 14644-4:2001, IDT, Ed. 1

SANS Number

(SABS ISO 14520-9)

(SABS ISO 14520-10)

(SABS ISO 14520-11)

(SABS ISO 14520-12)

(SABS ISO 14520-13)

(SABS ISO 14520-14)

(SABS ISO 14520-15)



(SABS ISO 14644-1)


October 2009

1

1

1

1

1

1

1

2

2

3

1

2

1

2

1

1

1

1

Edition

Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping Part 1: Vocabulary,symbols, applications and materials

Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping Part 2: Qualificationand manufacture

Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping Part 3: Systemdesign

Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping Part 4: Fabrication,installation and operation

Protection against corrosion of iron and steel instructures - Zinc and aluminium coatings -Guidelines

Information technology - Measurement and rating ofperformance of computer-based software systems

Software engineering - Mock up and prototype - Acategorization of software mock up and prototypemodels and their use

Software Engineering - Software Life CycleProcesses - Maintenance

Continuous hot-dip zinc-5 % aluminium alloy coatedsteel sheet

Lifts (elevators), escalators and moving walks - Riskassessment and reduction methodology

Transport information and control systems -Requirements for an ITS/TICS central Data Registryand ITS/TICS Data Dictionaries

Information technology - Security techniques -Digital signatures with appendix Part 1: General

Information technology - Security techniques -Digital signatures with appendix Part 2: Identity-based mechanisms

Information technology - Security techniques -Digital signatures with appendix Part 3: Discretelogarithm based mechanisms

Small craft - Liquid-fuelled galley stoves

Road transport and traffic telematics - Electronic feecollection - Application interface definition fordedicated short-range communication

Road transport and traffic telematics - Electronic feecollection - Test procedures for user and fixedequipment Part 1: Description of test procedures

Road transport and traffic telematics - Electronic feecollection - Test procedures for user and fixedequipment Part 2: Conformance test for the onboardunit application interface

Title

SANS 14692-1:2009/ISO 14692-1:2002, IDT, Ed. 1

SANS 14692-2:2009/ISO 14692-2:2002, IDT, Ed. 1

SANS 14692-3:2009/ISO 14692-3:2002, IDT, Ed. 1

SANS 14692-4:2009/ISO 14692-4:2002, IDT, Ed. 1

SANS 14713:1999/ISO 14713:1999, IDT, Ed. 1




SANS 14788:2007/ISO 14788:2005, IDT, Ed. 2

SANS 14798:2009/ISO 14798:2009, IDT, Ed. 1

SANS 14817:2007/ISO 14817:2002, IDT, Ed. 1




SANS 14895:2008/ISO 14895:2000, IDT, Ed. 1

SANS 14906:2009/ISO 14906:2004, IDT, Ed. 1

SANS 14907-1:2007/ISO/TS 14907-1:2005, IDT, Ed.1

SANS 14907-2:2007/ISO/TS 14907-2:2006, IDT, Ed.1

SANS Number

(SABS ISO 14713)

(SABS ISO 14788)


October 2009

1

1

1

2

1

1

1

1

1

1

1

1

1

1

1

2

1

1

1

Edition

Small craft - Builder's plate

Small craft - Maximum load capacity

Medical devices - Quality management systems -Guidance on the application of ISO 13485:2003

Medical devices - Application of risk management tomedical devices

Road vehicles - Ergonomic aspects of transportinformation and control systems - Dialoguemanagement principles and compliance procedures

Road vehicles - Ergonomic aspects of transportinformation and control systems - Specifications andcompliance procedures for in-vehicle auditorypresentation

Road vehicles - Ergonomic aspects of transportinformation and control systems - Specifications andcompliance procedures for in-vehicle visualpresentation

Information technology - System and softwareintegrity levels

Small craft - Bilge-pumping systems

Small craft - Anchoring, mooring and towing - Strongpoints

Small craft - Man-overboard prevention and recovery

Coal flow properties Part 1: Bin flow

Information and documentation - Vocabulary

Guidelines on the application of ISO 9001:2000 forthe food and drink industry

Project management guidelines for terminologystandardization

Medical laboratories - Particular requirements forquality and competence

Microbiology of food and animal feeding stuffs -Horizontal method for the enumeration of mesophiliclactic acid bacteria - Colony-count technique at 30°C

Medical devices - Symbols to be used with medicaldevice labels, labelling and information to besupplied

Solid mineral fuels - Determination of total mercurycontent of coal

Title

SANS 14945:2009/ISO 14945:2004, IDT, Ed. 1

SANS 14946:2008/ISO 14946:2001, IDT, Ed. 1

SANS 14969:2006/ISO/TR 14969:2004, IDT, Ed. 1

SANS 14971:2008/ISO 14971:2007, IDT, Ed. 2

SANS 15005:2007/ISO 15005:2002, IDT, Ed. 1

SANS 15006:2007/ISO 15006:2004, IDT, Ed. 1

SANS 15008:2007/ISO 15008:2003, IDT, Ed. 1


SANS 15083:2008/ISO 15083:2003, IDT, Ed. 1

SANS 15084:2008/ISO 15084:2003, IDT, Ed. 1

SANS 15085:2008/ISO 15085:2003, IDT, Ed. 1

SANS 15117-1:2006/ISO 15117-1:2004, IDT, Ed. 1

SANS 15127:2005/ISO 5127:2001, IDT, Ed. 1

SANS 15161:2003/ISO 15161:2001, IDT, Ed. 1

SANS 15188:2009/ISO 15188:2001, IDT, Ed. 1

SANS 15189:2009/ISO 15189:2007, IDT, Ed. 2

SANS 15214:1998/ISO 15214:1998, IDT, Ed. 1

SANS 15223:2006/ISO 15223:2000, IDT, Ed. 2

SANS 15237:2004/ISO 15237:2003, IDT, Ed. 1

SANS Number


(SABS ISO 15214)


October 2009

1

1

1

2

1

2

2

3

1

1

2

1

1

1

1

2

1

1

Edition

Solid mineral fuels - Determination of total cadmiumcontent of coal

Solid mineral fuels - Evaluation of the measurementperformance of on-line analysers

Information technology - Guide for ISO/IEC 12207(Software Life Cycle Processes)

Systems and software engineering - Systems lifecycle processes

Systems and software engineering - Content ofsystems and software life cycle process informationproducts (Documentation)

Information technology - Security techniques -Evaluation criteria for IT security Part 1: Introductionand general model

Information technology - Security techniques -Evaluation criteria for IT security Part 2: Securityfunctional requirements

Information technology - Security techniques -Evaluation criteria for IT security Part 3: Securityassurance components

Information technology - Automatic identification anddata capture techniques - Bar code print quality testspecification - Two- dimensional symbols

Information technology - Automatic identification anddata capture techniques - Bar code print quality testspecification - Linear symbols

Information technology - Automatic identification anddata capture techniques - Code 128 bar codesymbology specification

Information technology - EAN/UCC ApplicationIdentifiers and Fact Data Identifiers andMaintenance

Information technology - Automatic identification anddata capture techniques - Bar code symbologyspecification - EAN/UPC

Information technology - Automatic identification anddata capture techniques - Bar code master testspecifications

Information technology - Automatic identification anddata capture techniques - Bar code scanner anddecoder performance testing

Information technology - Automatic identification anddata capture techniques - Data Carrier Identifiers(including Symbology Identifiers)

Information technology - Automatic identification anddata capture techniques - Bar code verifierconformance specifications Part 1: Linear symbols

Information technology - Automatic identification anddata capture techniques - Bar code verifierconformance specification Part 2: Two-dimensionalsymbols

Title

SANS 15238:2004/ISO 15238:2003, IDT, Ed. 1

SANS 15239:2006/ISO 15239:2005, IDT, Ed. 1

















SANS Number




October 2009

1

1

1

1

1

1

1

2

1

1

1

1

1

1

1

1

1

Edition

Information technology - Automatic identification anddata capture techniques - Syntax for high-capacityADC media

Information technology - Automatic identification anddata capture techniques - PDF417 bar codesymbology specification

Cranes - Safety requirements for loader cranes

Information technology - Security techniques - Aframework for IT security assurance Part 1:Overview and framework

Information technology - Security techniques - Aframework for IT security assurance Part 2:Assurance methods

Information technology - Security techniques - Aframework for IT security assurance Part 3: Analysisof assurance methods

Information technology - Security techniques - Guidefor the production of Protection Profiles and SecurityTargets

Identification cards - Thin flexible cards Part 1:Physical characteristics

Identification cards - Thin flexible cards Part 2:Magnetic recording techniques

Identification cards - Thin flexible cards Part 3: Testmethods

Information technology - Unique identifiers Part 1:Unique identifiers for transport units

Information technology - Unique identifiers Part 2:Registration procedures

Information technology - Unique identifiers Part 3:Common rules for unique identifiers

Information technology - Unique identifiers Part 4:Individual items

Information technology - Unique identifiers Part 5:Unique identifier for returnable transport items(RTIs)

Information technology - Unique identifiers Part 6:Unique identifier for product groupings

Information and documentation - Recordsmanagement Part 1: General

Title



SANS 15442:2007/ISO 15442:2005, IDT, Ed. 1














SANS 15489-1:2004/ISO 15489-1:2001, IDT, Ed. 1

SANS Number


October 2009

1

1

2

2

2

2

2

1

1

1

1

1

1

1

1

1

1

1

Edition

Information and documentation - Recordsmanagement Part 2: Guidelines

Plastics piping systems for industrial applications -Polybutene (PB), polyethylene (PE) andpolypropylene (PP) - Specifications for componentsand the system - Metric series

Information technology - Process assessment Part1: Concepts and vocabulary

Information technology - Process assessment Part2: Performing an assessment

Information technology - Process assessment Part3: Guidance on performing an assessment

Information technology - Process assessment Part4: Guidance on use for process improvement andprocess capability determination

Information technology - Process assessment Part5: An exemplar process assessment model

Information and documentation - InternationalStandard Identifier for Libraries and RelatedOrganizations (ISIL)

Cranes - Competency requirements for crane drivers(operators), slingers, signallers and assessors

Paints, varnishes and raw materials for paints andvarnishes - Sampling

Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components

Hard coal - Determination of caking index

Water quality - Digestion for the determination ofselected elements in water Part 1: Aqua regiadigestion

Water quality - Digestion for the determination ofselected elements in water Part 2: Nitric aciddigestion

Petroleum and natural gas industries - Cathodicprotection of pipeline transportation systems Part 1:On-land pipelines

Petroleum and natural gas industries - Cathodicprotection of pipeline transportation systems Part 2:Offshore pipelines

Specification and qualification of welding proceduresfor metallic materials - General rules

Specification and qualification of welding proceduresfor metallic materials - Welding procedurespecification Part 1: Arc welding

Title

SANS 15489-2:2004/ISO/TR 15489-2:2001, IDT, Ed.1

SANS 15494:2005/ISO 15494:2003, IDT, Ed. 1






SANS 15511:2005/ISO 15511:2003, IDT, Ed. 1

SANS 15513:2008/ISO 15513:2000, IDT, Ed. 1

SANS 15528:2003/ISO 15528:2000, IDT, Ed. 1

SANS 15584:2008/ISO 15584:2001, IDT, Ed. 1

SANS 15585:2007/ISO 15585:2006, IDT, Ed. 1

SANS 15587-1:2002/ISO 15587-1:2002, IDT, Ed. 1

SANS 15587-2:2002/ISO 15587-2:2002, IDT, Ed. 1

SANS 15589-1:2009/ISO 15589-1:2003, IDT, Ed. 1

SANS 15589-2:2009/ISO 15589-2:2004, IDT, Ed. 1

SANS 15607:2007/ISO 15607:2003, IDT, Ed. 1

SANS 15609-1:2007/ISO 15609-1:2004, IDT, Ed. 1

SANS Number

(SABS ISO/IEC TR 15504-1)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Specification and qualification of welding proceduresfor metallic materials - Welding procedurespecification Part 2: Gas welding

Specification and qualification of welding proceduresfor metallic materials - Welding procedurespecification Part 3: Electron beam welding

Specification and qualification of welding proceduresfor metallic materials - Welding procedurespecification Part 5: Resistance welding

Specification and qualification of welding proceduresfor metallic materials - Welding procedure test Part1: Arc and gas welding of steels and arc welding ofnickel and nickel alloys

Specification and qualification of welding proceduresfor metallic materials - Welding procedure test Part2: Arc welding of aluminium and its alloys

Specification and qualification of welding proceduresfor metallic materials - Welding procedure test Part3: Fusion welding of non-alloyed and low-alloyedcast irons

Specification and qualification of welding proceduresfor metallic materials - Welding procedure test Part4: Finishing welding of aluminium castings

Specification and qualification of welding proceduresfor metallic materials - Welding procedure test Part5: Arc welding of titanium, zirconium and their alloys

Specification and qualification of welding proceduresfor metallic materials - Welding procedure test Part6: Arc and gas welding of copper and its alloys

Specification and qualification of welding proceduresfor metallic materials - Welding procedure test Part7: Overlay welding

Specification and qualification of welding proceduresfor metallic materials - Welding procedure test Part8: Welding of tubes to tube-plate joints

Specification and qualification of welding proceduresfor metallic materials - Welding procedure test Part10: Hyperbaric dry welding

Specification and qualification of welding proceduresfor metallic materials - Welding procedure test Part11: Electron and laser beam welding

Specification and qualification of welding proceduresfor metallic materials - Welding procedure test Part12: Spot, seam and projection welding

Specification and qualification of welding proceduresfor metallic materials - Welding procedure test Part13: Resistance butt and flash welding

Road transport and traffic telematics - Dedicatedshort range communication (DSRC) - DSRCapplication layer

Butter - Determination of salt content -Potentiometric method

Small craft - Remote steering systems for inboardmini jet boats

Title

SANS 15609-2:2009/ISO 15609-2:2001, IDT, Ed. 1

SANS 15609-3:2009/ISO 15609-3:2004, IDT, Ed. 1

SANS 15609-5:2009/ISO 15609-5:2004, IDT, Ed. 1

SANS 15614-1:2007/ISO 15614-1:2004, IDT, Ed. 1

SANS 15614-2:2007/ISO 15614-2:2005, IDT, Ed. 1

SANS 15614-3:2009/ISO 15614-3:2008, IDT, Ed. 1

SANS 15614-4:2008/ISO 15614-4:2005, IDT, Ed. 1

SANS 15614-5:2008/ISO 15614-5:2004, IDT, Ed. 1

SANS 15614-6:2008/ISO 15614-6:2006, IDT, Ed. 1

SANS 15614-7:2008/ISO 15614-7:2007, IDT, Ed. 1

SANS 15614-8:2008/ISO 15614-8:2002, IDT, Ed. 1

SANS 15614-10:2008/ISO 15614-10:2005, IDT, Ed. 1

SANS 15614-11:2008/ISO 15614-11:2002, IDT, Ed. 1

SANS 15614-12:2008/ISO 15614-12:2004, IDT, Ed. 1

SANS 15614-13:2008/ISO 15614-13:2005, IDT, Ed. 1

SANS 15628:2009/ISO 15628:2007, IDT, Ed. 1

SANS 15648:2005/ISO 15648:2004, IDT, Ed. 1

SANS 15652:2008/ISO 15652:2003, IDT, Ed. 1

SANS Number


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Fatigue test method for transmission precision rollerchains

Water quality - Determination of chloride by flowanalysis (CFA and FIA) and photometric orpotentiometric detection

Identification cards - Contactless integrated circuit(s)cards - Vicinity cards Part 1: Physical characteristics

Identification cards - Contactless integrated circuit(s)cards - Vicinity cards Part 2: Air interface andinitialization

Identification cards - Contactless integrated circuit(s)cards - Vicinity cards Part 3: Anticollision andtransmission protocol

Cranes - List of equivalent terms

Information and documentation - InternationalStandard Audiovisual Number (ISAN)

Information and documentation - InternationalStandard Musical Work Code (ISWC)

Non-destructive testing - Radiation methods -Computed tomography Part 1: Principles

Non-destructive testing - Radiation methods -Computed tomography Part 2: Examinationpractices

Bi-directional and multi-directional fork-lift trucks -Stability tests

Electronic imaging - Information stored electronically- Recommendations for trustworthiness andreliability

Information technology - Security techniques -Security information objects for access control

Dentistry - Casting and baseplate waxes

Powered industrial trucks - Safety signs and hazardpictorials - General principles

Plastics piping systems for hot and cold waterinstallations - Polypropylene (PP) Part 1: General

Plastics piping systems for hot and cold waterinstallations - Polypropylene (PP) Part 2: Pipes

Plastics piping systems for hot and cold waterinstallations - Polypropylene (PP) Part 3: Fittings

Plastics piping systems for hot and cold waterinstallations - Polypropylene (PP) Part 5: Fitness forpurpose of the system

Title

SANS 15654:2006/ISO 15654:2004, IDT, Ed. 1

SANS 15682:2002/ISO 15682:2000, IDT, Ed. 1




SANS 15696:2008/ISO/TS 15696:2000, IDT, Ed. 1

SANS 15706:2005/ISO 15706:2002, IDT, Ed. 1

SANS 15707:2005/ISO 15707:2001, IDT, Ed. 1

SANS 15708-1:2005/ISO 15708-1:2002, IDT, Ed. 1

SANS 15708-2:2005/ISO 15708-2:2002, IDT, Ed. 1

SANS 15794:2007/ISO 15794:2001, IDT, Ed. 1

SANS 15801:2005/ISO/TR 15801:2004, IDT, Ed. 1


SANS 15854:2008/ISO 15854:2005, IDT, Ed. 1

SANS 15870:2007/ISO 15870:2000, IDT, Ed. 1

SANS 15874-1:2004/ISO 15874-1:2003, IDT, Ed. 1

SANS 15874-2:2004/ISO 15874-2:2003, IDT, Ed. 1

SANS 15874-3:2004/ISO 15874-3:2003, IDT, Ed. 1

SANS 15874-5:2004/ISO 15874-5:2003, IDT, Ed. 1

SANS Number


October 2009

2

2

2

2

1

1

1

1

1

1

1

1

1

1

1

1

1

2

1

Edition

Plastics piping systems for hot and cold waterinstallations - Crosslinked polyethylene (PE-X) Part1: General

Plastics piping systems for hot and cold waterinstallations - Crosslinked polyethylene (PE-X) Part2: Pipes

Plastics piping systems for hot and cold waterinstallations - Crosslinked polyethylene (PE-X) Part3: Fittings

Plastics piping systems for hot and cold waterinstallations - Crosslinked polyethylene (PE-X) Part5: Fitness for purpose of the system

Plastics piping systems for hot and cold waterinstallations - Polybutylene (PB) Part 1: General

Plastics piping systems for hot and cold waterinstallations - Polybutylene (PB) Part 2: Pipes

Plastics piping systems for hot and cold waterinstallations - Polybutylene (PB) Part 3: Fittings

Plastics piping systems for hot and cold waterinstallations - Polybutylene (PB) Part 5: Fitness forpurpose of the system

Plastics piping systems for hot and cold waterinstallations - Chlorinated poly(vinyl chloride)(PVC-C) Part 1: General

Plastics piping systems for hot and cold waterinstallations - Chlorinated poly(vinyl chloride)(PVC-C) Part 2: Pipes

Plastics piping systems for hot and cold waterinstallations - Chlorinated poly(vinyl chloride)(PVC-C) Part 3: Fittings

Plastics piping systems for hot and cold waterinstallations - Chlorinated poly(vinyl chloride)(PVC-C) Part 5: Fitness for purpose of the system

Washer-disinfectors Part 1: General requirements,terms and definitions and tests

Washer-disinfectors Part 2: Requirements and testsfor washer-disinfectors employing thermaldisinfection for surgical instruments, anaestheticequipment, bowls, dishes, receivers, utensils,glassware, etc

Washer-disinfectors Part 4: Requirements and testsfor washer-disinfectors employing chemicaldisinfection for thermolabile endoscopes

Information technology - Software userdocumentation process

Information and documentation - Codes for therepresentation of names of scripts

Systems and software engineering - Measurementprocess

Information Technology - Software engineeringenvironment services

Title

SANS 15875-1:2004/ISO 15875-1:2003, IDT, Ed. 1

SANS 15875-2:2004/ISO 15875-2:2003, IDT, Ed. 1

SANS 15875-3:2004/ISO 15875-3:2003, IDT, Ed. 1

SANS 15875-5:2004/ISO 15875-5:2003, IDT, Ed. 1

SANS 15876-1:2005/ISO 15876-1:2003, IDT, Ed. 1

SANS 15876-2:2005/ISO 15876-2:2003, IDT, Ed. 1

SANS 15876-3:2005/ISO 15876-3:2003, IDT, Ed. 1

SANS 15876-5:2005/ISO 15876-5:2003, IDT, Ed. 1

SANS 15877-1:2005/ISO 15877-1:2003, IDT, Ed. 1

SANS 15877-2:2005/ISO 15877-2:2003, IDT, Ed. 1

SANS 15877-3:2005/ISO 15877-3:2003, IDT, Ed. 1

SANS 15877-5:2005/ISO 15877-5:2003, IDT, Ed. 1

SANS 15883-1:2008/ISO 15883-1:2006, IDT, Ed. 1

SANS 15883-2:2008/ISO 15883-2:2006, IDT, Ed. 1

SANS 15883-4:2008/ISO 15883-4:2008, IDT, Ed. 1


SANS 15924:2005/ISO 15924:2004, IDT, Ed. 1



SANS Number


October 2009

1

2

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Information technology - Security techniques -Specification of TTP services to support theapplication of digital signatures

Information technology - Security techniques -Cryptographic techniques based on elliptic curvesPart 1: General

Information technology - Security techniques -Cryptographic techniques based on elliptic curvesPart 2: Digital signatures

Information technology - Security techniques -Cryptographic techniques based on elliptic curvesPart 3: Key establishment

Information technology - Security techniques -Cryptographic techniques based on elliptic curvesPart 4: Digital signatures giving message recovery

Information technology - Security techniques - ITintrusion detection framework

Information technology - Radio frequencyidentification for item management - Uniqueidentification for RF tags

HIV and AIDS management systems - Generalrequirements

Information technology - Automatic identification anddata capture techniques - Data Matrix bar codesymbology specification

Rubber condoms for clinical trials - Measurement ofphysical properties

Rubber condoms - Guidance on the use of ISO 4074in the quality management of natural rubber latexcondoms

Methods for the calibration of vibration and shocktransducers Part 1: Basic concepts

Methods for the calibration of vibration and shocktransducers Part 11: Primary vibration calibration bylaser interferometry

Methods for the calibration of vibration and shocktransducers Part 13: Primary shock calibration usinglaser interferometry

Methods for the calibration of vibration and shocktransducers Part 21: Vibration calibration bycomparison to a reference transducer

Methods for the calibration of vibration and shocktransducers Part 22: Shock calibration bycomparison to a reference transducer

Systems and software engineering - Life cycleprocesses - Risk management

Rubber and plastics - Analysis of multipeak tracesobtained in determinations of tear strength andadhesion strength

Industrial valves - Ball valves of thermoplasticsmaterials

Title








SANS 16001:2007/AMS 16001:2003, MOD


SANS 16037:2003/ISO 16037:2002, IDT, Ed. 1

SANS 16038:2006/ISO 16038:2005, IDT, Ed. 1

SANS 16063-1:2008/ISO 16063-1:1998, IDT, Ed. 1

SANS 16063-11:2008/ISO 16063-11:1999, IDT, Ed. 1

SANS 16063-13:2008/ISO 16063-13:2001, IDT, Ed. 1

SANS 16063-21:2008/ISO 16063-21:2003, IDT, Ed. 1

SANS 16063-22:2008/ISO 16063-22:2005, IDT, Ed. 1


SANS 16133:2003/ISO 6133:1998, IDT, Ed. 2

SANS 16135:2009/ISO 16135:2006, IDT, Ed. 1

SANS Number


October 2009

1

1

1

1

1

1

2

1

1

1

1

1

1

3

1

1

1

1

2

Edition

Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components

Technical aids for persons with disability -Environmental control systems for daily living

Statistical interpretation of data Part 6:Determination of statistical tolerance intervals

Software engineering - Guide for the application ofISO/IEC 12207 to project management

Mobile elevating work platforms - Designcalculations, safety requirements and test methods

Information technology - Automatic identification anddata capture techniques - Code 39 bar codesymbology specification

Information technology - Automatic identification anddata capture techniques - Interleaved 2 of 5 barcode symbology specification

Pipes and joints made of oriented unplasticizedpoly(vinyl chloride) (PVC-O) for the conveyance ofwater under pressure - Specifications

Water quality - Determination of mercury - Methodsinvolving enrichment by amalgamation

Computer applications in terminology -Terminological markup framework

Microbiology of food and animal feeding stuffs -Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli Part 3: Mostprobable number technique using 5-bromo-4-chloro-3-indolyl-beta-D-glucuronide

Microbiology of food and animal feeding stuffs -Horizontal method for the detection of Escherichiacoli O157

Earth-moving machinery - Recyclability andrecoverability - Terminology and calculation method

Quality management systems - Particularrequirements for the application of ISO 9001:2008for automotive production and relevant service partorganizations

Conformity assessment - Vocabulary and generalprinciples

General criteria for the operation of various types ofbodies performing inspection

Conformity assessment - Requirements for bodiesproviding audit and certification of managementsystems

Conformity assessment - General requirements forbodies operating certification of persons

General requirements for the competence of testingand calibration laboratories

Title

SANS 16147:2008/ISO 16147:2002, IDT, Ed. 1

SANS 16201:2009/ISO 16201:2006, IDT, Ed. 1

SANS 16269-6:2006/ISO 16269-6:2005, IDT, Ed. 1


SANS 16368:2007/ISO 16368:2003, IDT, Ed. 1



SANS 16422:2007/ISO 16422:2006, IDT, Ed. 1

SANS 16590:2000/ISO 16590:2000, IDT, Ed. 1

SANS 16642:2006/ISO 16642:2003, IDT, Ed. 1

SANS 16649-3:2008/ISO/TS 16649-3:2005, IDT, Ed.1

SANS 16654:2003/ISO 16654:2001, IDT, Ed. 1

SANS 16714:2009/ISO 16714:2008, IDT, Ed. 1

SANS 16949:2009/ISO/TS 16949:2009, IDT, Ed. 3






SANS Number


(SABS ISO 16590)

(SABS ISO/TS 16949)




October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

2

1

2

2

Edition

Conformity assessment - General requirements forpeer assessment of conformity assessment bodiesand accreditation bodies

Health informatics - Public key infrastructure Part 1:Framework and overview

Health informatics - Public key infrastructure Part 2:Certificate profile

Health informatics - Public key infrastructure Part 3:Policy management of certification authority

Health Informatics - Controlled health terminology -Structure and high-level indicators

Leather - Physical and mechanical tests -Determination of water vapour absorption

Leather - Physical and mechanical tests -Determination of softness

Coal - Proximate analysis

Coal - Ultimate analysis

Water quality - Selection and application of ready-to-use test kit methods in water analysis

Water quality - Determination of selectednitrophenols - Method by solid-phase extraction andgas chromatography with mass spectrometricdetection

Sterilization of medical devices - Information to beprovided by the manufacturer for the processing ofresterilizable medical devices

Sterilization of health care products - Moist heat Part1: Requirements for the development, validation androutine control of a sterilization process for medicaldevices

Information technology - Radio frequencyidentification for item management Part 1:Reference architecture and definition of parametersto be standardized

Information technology - Radio frequencyidentification for item management Part 2:Parameters for air interface communications below135 kHz

Information technology - Radio frequencyidentification for item management Part 3:Parameters for air interface communications at13,56 MHz

Information technology - Radio frequencyidentification for item management Part 4:Parameters for air interface communications at 2,45GHz

Title


SANS 17090-1:2003/ISO/TS 17090-1:2002, IDT, Ed.1

SANS 17090-2:2003/ISO/TS 17090-2:2002, IDT, Ed.1

SANS 17090-3:2003/ISO/TS 17090-3:2002, IDT, Ed.1

SANS 17117:2003/ISO/TS 17117:2002, IDT, Ed. 1

SANS 17229:2009/ISO 17229:2002, IDT, Ed. 1

SANS 17235:2009/ISO 17235:2002, IDT, Ed. 1

SANS 17246:2006/ISO 17246:2005, IDT, Ed. 1

SANS 17247:2006/ISO 17247:2005, IDT, Ed. 1

SANS 17381:2008/ISO 17381:2003, IDT, Ed. 1

SANS 17495:2002/ISO 17495:2001, IDT, Ed. 1

SANS 17664:2007/ISO 17664:2004, IDT, Ed. 1

SANS 17665-1:2007/ISO 17665-1:2006, IDT, Ed. 1





SANS Number


October 2009

1

1

1

1

1

1

1

2

1

1

1

1

1

1

1

1

1

Edition

Information technology - Radio frequencyidentification for item management Part 6:Parameters for air interface communications at 860MHz to 960 MHz

Information technology - Radio frequencyidentification for item management Part 7:Parameters for active air interface communicationsat 433 MHz

Information technology - Radio frequencyidentification for item management - Applicationrequirements profiles

Information technology - Automatic identification anddata capture techniques - QR Code 2005 bar codesymbology specification

Information technology - Personal identification -ISO-compliant driving licence Part 1: Physicalcharacteristics and basic data set

Information technology - Personal identification -ISO-compliant driving licence Part 2: Machine-readable technologies

Information technology - Personal identification -ISO-compliant driving licence Part 3: Access control,authentication and integrity validation

Information technology - Security techniques - Timestamping services Part 1: Framework

Information technology - Security techniques - Timestamping services Part 2: Mechanisms producingindependent tokens

Information technology - Security techniques - Time-stamping services Part 3: Mechanisms producinglinked tokens

Software and system engineering - Guidelines forthe design and preparation of user documentationfor application software

Information technology - Security techniques - ITnetwork security Part 1: Network securitymanagement

Information technology - Security techniques - ITnetwork security Part 3: Securing communicationsbetween networks using security gateways

Information technology - Security techniques - ITnetwork security Part 4: Securing remote access

Information technology - Security techniques - ITnetwork security Part 5: Securing communicationsacross networks using virtual private networks

Information technology - Security techniques -Random bit generation

Information technology - Security techniques - Primenumber generation

Title


















SANS Number


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Information technology - Security techniques -Encryption algorithms Part 1: General

Information technology - Security techniques -Encryption algorithms Part 2: Asymmetric ciphers

Information technology - Security techniques -Encryption algorithms Part 3: Block ciphers

Information technology - Security techniques -Encryption algorithms Part 4: Stream ciphers

Information technology - Security techniques -Selection, deployment and operations of intrusiondetection systems

Information technology - Security techniques -Information security incident management

Information technology - Security techniques -Methodology for IT security evaluation

Information technology - Radio frequencyidentification device performance test methods Part3: Test methods for tag performance

Information technology - Radio frequencyidentification device conformance test methods Part2: Test methods for air interface communicationsbelow 135 kHz

Information technology - Radio frequencyidentification device conformance test methods Part3: Test methods for air interface communications at13,56 MHz

Information technology - Radio frequencyidentification device conformance test methods Part4: Test methods for air interface communications at2,45 GHz

Traffic and Travel Information (TTI) - TTI viaTransport Protocol Expert Group (TPEG) data-streams Part 1: Introduction, numbering andversions

Traffic and Travel Information (TTI) - TTI viaTransport Protocol Expert Group (TPEG) data-streams Part 2: Syntax, Semantics and FramingStructure (SSF)

Traffic and Travel Information (TTI) - TTI viaTransport Protocol Expert Group (TPEG) data-streams Part 3: Service and Network Information(SNI) application

Traffic and Travel Information (TTI) - TTI viaTransport Protocol Expert Group (TPEG) data-streams Part 4: Road Traffic Message (RTM)application

Traffic and Travel Information (TTI) - TTI viaTransport Protocol Expert Group (TPEG) data-streams Part 6: Location referencing applications

Title












SANS 18234-1:2007/ISO/TS 18234-1:2006, IDT, Ed.1

SANS 18234-2:2007/ISO/TS 18234-2:2006, IDT, Ed.1

SANS 18234-3:2007/ISO/TS 18234-3:2006, IDT, Ed.1

SANS 18234-4:2007/ISO/TS 18234-4:2006, IDT, Ed.1

SANS 18234-6:2007/ISO/TS 18234-6:2006, IDT, Ed.1

SANS Number


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

2

1

Edition

Hard coal and coke - Manual sampling

Health informatics - Requirements for an electronichealth record architecture

Cosmetics - Microbiology - Detection of specifiedand non-specified microorganisms

Microbiology of food and animal feeding stuffs -Horizontal methods for sampling techniques fromsurfaces using contact plates and swabs

Health informatics - Clinical analyser interfaces tolaboratory information systems - Use profiles

Mobile elevating work platforms - Operator (driver)training

Mobile elevating work platforms - Safety principles,inspection, maintenance and operation

Document management - Electronic document fileformat for long-term preservation Part 1: Use of PDF1.4 (PDF/A-1)

Guidelines for quality and/or environmentalmanagement systems auditing

Financial services - Biometrics - Security framework

Geographic information - Reference model

Geographic information - Conceptual schemalanguage

Geographic information - Conformance and testing

Geographic information - Profiles

Geographic information - Spatial schema

Geographic information - Temporal schema

Geographic information - Rules for applicationschema

Geographic information - Methodology for featurecataloguing

Geographic information - Spatial referencing bycoordinates

Geographic information - Spatial referencing bygeographic identifiers

Title

SANS 18283:2007/ISO 18283:2006, IDT, Ed. 1

SANS 18308:2007/ISO/TS 18308:2004, IDT, Ed. 1

SANS 18415:2009/ISO 18415:2007, IDT, Ed. 1

SANS 18593:2004/ISO 18593:2004, IDT, Ed. 1

SANS 18812:2003/ISO 18812:2003, IDT, Ed. 1

SANS 18878:2007/ISO 18878:2004, IDT, Ed. 1

SANS 18893:2007/ISO 18893:2004, IDT, Ed. 1

SANS 19005-1:2006/ISO 19005-1:2005, IDT, Ed. 1

SANS 19011:2003/ISO 19011:2002, IDT, Ed. 1

SANS 19092:2009/ISO 19092:2008, IDT, Ed. 1

SANS 19101:2003/ISO 19101:2002, IDT, Ed. 1

SANS 19103:2006/ISO/TS 19103:2005, IDT, Ed. 1

SANS 19105:2003/ISO 19105:2000, IDT, Ed. 1

SANS 19106:2004/ISO 19106:2004, IDT, Ed. 1

SANS 19107:2003/ISO 19107:2003, IDT, Ed. 1

SANS 19108:2003/ISO 19108:2002, IDT, Ed. 1

SANS 19109:2006/ISO 19109:2005, IDT, Ed. 1

SANS 19110:2005/ISO 19110:2005, IDT, Ed. 1

SANS 19111:2009/ISO 19111:2007, IDT, Ed. 2

SANS 19112:2004/ISO 19112:2003, IDT, Ed. 1

SANS Number


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Geographic information - Quality principles

Geographic information - Quality evaluationprocedures

Geographic information - Metadata

Geographic information - Positioning services

Geographic information - Portrayal

Geographic information - Encoding

Geographic information - Services

Geographic information - Functional standards

Geographic information - Imagery and gridded data

Geographic information/Geomatics - Qualificationand certification of personnel

Geographic information - Schema for coveragegeometry and functions

Geographic information - Simple feature access Part1: Common architecture

Geographic information - Simple feature access Part2: SQL option

Geographic information - Geodetic codes andparameters

Geographic information - Location-based services -Tracking and navigation

Geographic information - Procedures for itemregistration

Geographic information - Schema for movingfeatures

Solid mineral fuels - Determination of sulfur by IRspectrometry

Information technology - Method for thedetermination of toner cartridge yield formonochromatic electrophotographic printers andmulti-function devices that contain printercomponents

Software Engineering - Guide to the SoftwareEngineering Body of Knowledge (SWEBOK)

Title

SANS 19113:2003/ISO 19113:2002, IDT, Ed. 1

SANS 19114:2004/ISO 19114:2003, IDT, Ed. 1

SANS 19115:2003/ISO 19115:2003, IDT, Ed. 1

SANS 19116:2004/ISO 19116:2004, IDT, Ed. 1

SANS 19117:2006/ISO 19117:2005, IDT, Ed. 1

SANS 19118:2006/ISO 19118:2005, IDT, Ed. 1

SANS 19119:2005/ISO 19119:2005, IDT, Ed. 1

SANS 19120:2003/ISO/TR 19120:2001, IDT, Ed. 1

SANS 19121:2000/ISO/TR 19121:2000, IDT, Ed. 1

SANS 19122:2005/ISO/TR 19122:2004, IDT, Ed. 1

SANS 19123:2006/ISO 19123:2005, IDT, Ed. 1

SANS 19125-1:2005/ISO 19125-1:2004, IDT, Ed. 1

SANS 19125-2:2005/ISO 19125-2:2004, IDT, Ed. 1

SANS 19127:2006/ISO/TS 19127:2005, IDT, Ed. 1

SANS 19133:2006/ISO 19133:2005, IDT, Ed. 1

SANS 19135:2006/ISO 19135:2005, IDT, Ed. 1


SANS 19579:2007/ISO 19579:2006, IDT, Ed. 1



SANS Number

(SABS ISO/TR 19121)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Systems engineering - A guide for the application ofISO/IEC 15288 (System life cycle processes)

Software engineering - COSMIC-FFP - A functionalsize measurement method

Information technology - Automatic identification anddata capture (AIDC) techniques - Harmonizedvocabulary Part 1: General terms relating to AIDC

Information technology - Automatic identification anddata capture (AIDC) techniques - Harmonizedvocabulary Part 2: Optically readable media (ORM)

Information technology - Automatic identification anddata capture (AIDC) techniques - Harmonizedvocabulary Part 3: Radio frequency identification(RFID)

Information technology - Automatic identification anddata capture (AIDC) techniques - Harmonizedvocabulary Part 4: General terms relating to radiocommunications

Information technology - Automatic identification anddata capture (AIDC) techniques - Harmonizedvocabulary Part 5: Locating systems

Information technology - Automatic identification anddata capture techniques - Effects of gloss and lowsubstrate opacity on reading of bar code symbols

Information technology - Biometric applicationprogramming interface Part 1: BioAPI specification

Information technology - Common BiometricExchange Formats Framework Part 1: Data elementspecification

Information Technology - Common biometricexchange formats framework Part 3: Patron formatspecifications

Information technology - Security techniques -Security requirements for cryptographic modules

Information technology - Security techniques -Security assessment of operational systems

Information technology - Biometric data interchangeformats Part 1: Framework

Information technology - Biometric data interchangeformats Part 2: Finger minutiae data

Information technology - Biometric data interchangeformats Part 4: Finger image data

Information technology - Biometric data interchangeformats Part 5: Face image data

Title


















SANS Number


October 2009

1

1

1

1

1

1

1

1

1

1

1

2

1

1

2

3

Edition

Information technology - Biometric data interchangeformats Part 6: Iris image data

Information technology - Biometric performancetesting and reporting Part 1: Principles andframework

Information technology - Biometric performancetesting and reporting Part 2: Testing methodologiesfor technology and scenario evaluation

Information technology - Biometric performancetesting and reporting Part 3: Modality - Specifictesting

Information technology - Biometric performancetesting and reporting Part 4: Interoperabilityperformance testing

Information technology - Learning, education andtraining - Quality management, assurance andmetrics Part 1: General approach

Method for the determination of toner cartridge yieldfor colour printers and multi-function devices thatcontain printer components

Cranes - Safety code on mobile cranes

Information technology - Service management Part1: Specification

Information technology - Service management Part2: Code of practice

Uniform provisions concerning the approval of motorvehicle headlamps emitting an asymmetricalpassing beam and/or a driving beam and equippedwith filament lamps of categories R2 and/or HS1

Uniform provisions concerning the approval of retro-reflective devices for power-driven vehicles and theirtrailers

Uniform provisions concerning the approval ofdevices for the illumination of rear registration platesof motor vehicles (except motor cycles) and theirtrailers

Uniform provisions concerning the approval ofpower-driven vehicle's sealed-beam headlamps (SB)emitting a European asymmetrical passing beam ora driving beam or both

Uniform provisions concerning the approval ofdirection indicators for motor vehicles and theirtrailers

Uniform provisions concerning the approval of frontand rear position (side) lamps, stop-lamps and end-outline marker lamps for power-driven vehicles andtheir trailers

Title








SANS 19961:2007/ISO/TR 19961:2005, IDT, Ed. 1



SANS 20001:1992/ECE R1:1992, IDT, Ed. 5

SANS 20003:2005/ECE R3:2005, IDT, Ed. 4

SANS 20004:1997/ECE R4:1997, IDT, Ed. 2

SANS 20005:1992/ECE R5:1992, IDT, Ed. 4

SANS 20006:2003/ECE R6:2001, IDT, Ed. 4

SANS 20007:2007/ECE R7:2006, IDT, Ed. Rev 4

SANS Number

(SABS ECE R 1)

(SABS ECE R 3)

(SABS ECE R 4)

(SABS ECE R 5)

(SABS ECE R 6)

(SABS ECE R 7)


October 2009

2

1

1

1

1

3

2

2

2

2

2

2

1

2

2

1

1

Edition

Uniform provisions concerning the approval of motorvehicle headlamps emitting an asymmetricalpassing beam or a driving beam or both andequipped with halogen filament lamps (H1, H2, H3,HB3, HB4, H7, H8, H9, HIR1, HIR2 and/or H11)

Uniform provisions concerning the approval ofcategory L2, L4 and L5 vehicles with regard to noise

Uniform provisions concerning the approval ofvehicles with regard to electromagnetic compatibility

Uniform provisions concerning the approval ofvehicles with regard to door latches and doorretention components

Uniform provisions concerning the approval ofvehicles with regard to the protection of the driveragainst the steering mechanism in the event ofimpact

Uniform provisions concerning the approval ofvehicles of categories M, N and O with regard tobraking

Uniform provisions concerning the approval ofpassenger cars with regard to braking

Uniform provisions concerning the approval ofvehicles with regard to safety-belt anchorages, isofixanchorages systems and isofix top tetheranchorages

Uniform provisions concerning the approval of I.Safety-belts, restraint systems, child restraintsystems and isofix child restraint systems foroccupants of power-driven vehicles II. Vehiclesequipped with safety-belts, restraint systems, childrestraint systems and isofix child restraint systems

Uniform provisions concerning the approval ofvehicles with regard to the seats, their anchoragesand any head restraints

Uniform provisions concerning the approval ofpower-driven vehicle front fog lamps

Uniform provisions concerning the approval of motorvehicle headlamps emitting an asymmetricalpassing beam or a driving beam or both andequipped with halogen filament lamps (H4 lamps)

Uniform provisions concerning the approval ofvehicles with regard to their interior fittings

Uniform provisions concerning the approval ofprotective helmets and of their visors for drivers andpassengers of motor cycles and mopeds

Uniform provisions concerning the approval ofreversing lamps for power-driven vehicles and theirtrailers

Uniform provisions for the approval of advance-warning triangles

Uniform provisions for the approval of audiblewarning devices and of motor vehicles with regard totheir audible signals

Title

SANS 20008:2004/ECE R8:2002, IDT, Ed. 5




SANS 20012:1994/ECE R12:1994, IDT, Ed. 3

SANS 20013:2009/ECE R13:2008, IDT, Ed. 6

SANS 20013-H:2009/ECE R13-H:2008, IDT, Ed. Rev1






SANS 20021:1993/ECE R21:1993, IDT

SANS 20022:2005/ECE R22:2002, IDT, Ed. 5


SANS 20027:1998/ECE R27:1998, IDT, Ed. 2

SANS 20028:1972/ECE R28:1972, IDT, Ed. 1

SANS Number

(SABS ECE R 8)

(SABS ECE R 11)

(SABS ECE R 12)

(SABS ECE R 13)

(SABS ECE R 14)

(SABS ECE R 16)

(SABS ECE R 19)

(SABS ECE R 20)

(SABS ECE R 21)

(SABS ECE R 22)

(SABS ECE R 23)

(SABS ECE R 27)

(SABS ECE R 28)


October 2009

1

1

1

3

1

1

1

2

1

2

1

3

2

2

1

1

1

Edition

Pneumatic tyres for passenger cars and their trailers

Uniform provisions concerning the approval ofpower-driven vehicle's sealed-beam headlamps (SB)emitting a European asymmetrical passing beam ora driving beam or both

Uniform provisions concerning the approval of largepassenger vehicles with regard to their generalconstruction

Uniform provisions concerning the approval offilament lamps for use in approved lamp units ofpower-driven vehicles and of their trailers

Uniform provisions concerning the approval ofvehicles with regard to the speedometer equipmentincluding its installation

Uniform provisions concerning the approval ofmotorcycles equipped with a positive-ignition enginewith regard to the emission of gaseous pollutants bythe engine

Uniform provisions concerning the approval of motorcycles with regard to noise

Uniform provisions concerning the approval of safetyglazing materials and their installation on vehicles

Uniform provisions concerning the approval ofrestraining devices for child occupants of power-driven vehicles ("child restraint system")

Uniform provisions concerning the approval ofdevices for indirect vision and of motor vehicles withregard to the installation of these devices

Uniform provisions concerning the approval ofmopeds equipped with a positive-ignition engine withregard to the emission of gaseous pollutants by theengine

Uniform provisions concerning the approval ofvehicles with regard to the installation of lighting andlight-signalling devices

Uniform provisions concerning the measures to betaken against the emission of gaseous andparticulate pollutants from compression-ignitionengines for use in vehicles, and the emission ofgaseous pollutants from positive-ignition enginesfuelled with natural gas or liquefied petroleum gasfor use in vehicles

Uniform provisions concerning the approval of frontposition lamps, rear position lamps, stop lamps,direction indicators and rear-registration-plateilluminating devices for vehicles of category L

Uniform provisions concerning the approval of M2and M3 small capacity vehicles with regard to theirgeneral construction

Uniform provisions concerning the approval ofcategory L3 vehicles with regard to the installation oflighting and light-signalling devices

Pneumatic tyres for commercial vehicles and theirtrailers

Title


SANS 20031:1992/ECE R31:1992, IDT, Ed. 2

SANS 20036:2004/ECE R36:2002, IDT, Ed. 3


SANS 20039:2003/ECE R39:2003, IDT, Ed. 2

SANS 20040:2005/ECE R40:1979, IDT, Ed. 1

SANS 20041:2004/ECE R41:1994, IDT, Ed. 2

SANS 20043:2005/ECE R43:2004, IDT, Ed. 3

SANS 20044:1998/ECE R44:1998, IDT, Ed. 1


SANS 20047:2004/ECE R47:1981, IDT, Ed. 1




SANS 20052:2004/ECE R52:2003, IDT, Ed. 3



SANS Number

(SABS ECE R 31)

(SABS ECE R 37)

(SABS ECE R 43)

(SABS ECE R 44)

(SABS ECE R 46)

(SABS ECE R 48)

(SABS ECE R 50)


October 2009

1

1

1

1

1

1

1

1

1

2

1

1

1

1

1

1

1

Edition

Uniform provisions concerning the approval ofmechanical coupling components of combinations ofvehicles

Uniform provisions concerning the approval ofheadlamps for mopeds and vehicles treated as such

Uniform provisions concerning the approval ofheadlamps for motor cycles and vehicles treated assuch

Uniform provisions concerning the approval ofreplacement silencing systems

Uniform provisions concerning the approval of two-wheeled motor cycles and mopeds with regard todriver-operated controls including the identificationof controls, tell-tales and indicators

Uniform provisions concerning the approval ofpower-driven vehicles with handlebars with regard totheir protection against unauthorized use

Uniform provisions concerning the approval of two-wheeled mopeds with regard to noise

Temporary-use spare wheels/tyres

Uniform provisions concerning the approval ofspecial warning lamps for power-driven vehicles andtheir trailers

Uniform provisions concerning I. approval of specificequipment of motor vehicles using liquefiedpetroleum gases in their propulsion system; II.approval of a vehicle fitted with specific equipmentfor the use of liquefied petroleum gases in itspropulsion system with regard to the installation ofsuch equipment

Uniform provisions concerning the approval of rearmarking plates for slow-moving vehicles (byconstruction) and their trailers

Uniform provisions concerning the approval of rearmarking plates for heavy and long vehicles

Uniform provisions concerning the approval of motorcycle headlamps emitting an asymmetrical passingbeam and a driving beam and equipped withhalogen filament lamps (HS1)

Uniform provisions concerning the approval ofgoods vehicles, trailers and semi-trailers with regardto their lateral protection

Uniform provisions concerning the approval ofcategory L1 vehicles with regard to the installation oflighting and light-signalling devices

Uniform provisions concerning the approval ofpneumatic tyres for motor cycles and mopeds

Uniform provisions concerning the approval ofheadlamps for mopeds emitting a driving beam anda passing beam

Title

SANS 20055:2003/ECE R55:2001, IDT, Ed. 2

SANS 20056:1989/ECE R56:1989, IDT, Ed. 2

SANS 20057:1995/ECE R57:1995, IDT, Ed. 2

SANS 20059:2007/ECE R59:1983, IDT, Ed. 1

SANS 20060:2007/ECE R60:1984, IDT, Ed. 1

SANS 20062:2007/ECE R62:1984, IDT, Ed. 1

SANS 20063:2004/ECE R63:1985, IDT, Ed. 1

SANS 20064:2007/ECE R64:1985, IDT, Ed. 1



SANS 20069:1987/ECE R69:1987, IDT, Ed. 1

SANS 20070:1987/ECE R70:1987, IDT, Ed. 1

SANS 20072:1988/ECE R72:1988, IDT, Ed. 1


SANS 20074:2000/ECE R74:2000, IDT, Ed. 2

SANS 20075:2004/ECE R75:1997, IDT, Ed. 2

SANS 20076:1988/ECE R76:1988, IDT, Ed. 1

SANS Number

(SABS ECE R 56)

(SABS ECE R 57)

(SABS ECE R 69)

(SABS ECE R 70)

(SABS ECE R 72)

(SABS ECE R 73)

(SABS ECE R 74)

(SABS ECE R 76)


October 2009

2

1

1

1

2

1

1

1

1

1

3

2

1

2

2

2

Edition

Uniform provisions concerning the approval ofvehicles of categories L1, L2, L3, L4 and L5 withregard to braking

Uniform provisions concerning the approval of seatsof large passenger vehicles and of these vehicleswith regard to the strength of the seats and theiranchorages

Uniform provisions concerning the approval of rear-view mirrors and of two-wheeled power-drivenvehicles with or without side car, with regard to theinstallation of rear-view mirrors on handlebars

Uniform provisions concerning the approval ofmoped headlamps equipped with filament halogenlamps (HS2 lamps)

Uniform provisions concerning the approval ofvehicles with regard to the emission of pollutantsaccording to engine fuel requirements

Uniform provisions concerning the approval ofpassenger cars equipped with an internalcombustion engine with regard to the measurementof fuel consumption

Uniform provisions concerning the approval ofagricultural or forestry tractors with regard to theinstallation of lighting and light-signalling devices

Uniform provisions concerning the approval ofdaytime running lamps for power-driven vehicles

Uniform provisions concerning the approval ofretroreflective tyres for two-wheeled vehicles

Uniform prescriptions for approval of: I Vehicles withregard to limitation of their maximum speed or theiradjustable speed limitation function II Vehicles withregard to the installation of a speed limiting device(SLD) or adjustable speed limitation device (ASLD)of an approved type III Speed limitation devices(SLD) and adjustable speed limitation device (ASLD)

Replacement brake lining assemblies and drumbrake linings for power-driven vehicles and theirtrailers

Uniform provisions concerning the approval of side-marker lamps for motor vehicles and their trailers

Uniform provisions concerning the approval ofvehicles with regard to the protection of theoccupants in the event of a frontal collision

Uniform provisions concerning the approval ofcompression ignition (C.I.) engines to be installed inagricultural and forestry tractors and in non-roadmobile machinery with regard to the emissions ofpollutants by the engine

Uniform provisions concerning the approval of motorvehicle headlamps equipped with gas-dischargelight sources

Uniform provisions concerning the approval of gas-discharge light sources for use in approved gas-discharge lamp units of power-driven vehicles

Title


SANS 20080:1989/ECE R80:1989, IDT, Ed. 1

SANS 20081:1989/ECE R81:1989, IDT, Ed. 1

SANS 20082:1989/ECE R82:1989, IDT, Ed. 1


SANS 20084:2004/ECE R84:1991, IDT, Ed. 1

SANS 20086:1993/ECE R86:1993, IDT, Ed. 1

SANS 20087:2005/ECE R87:2003, IDT, Ed. 2

SANS 20088:2007/ECE R88:1993, IDT, Ed. 1

SANS 20089:2006/ECE R89:1993, IDT, Ed. 1

SANS 20090:2008/ECE R90:2001, MOD, Ed. 2



SANS 20096:2009/ECE R96:2006, IDT, Ed. 2


SANS 20099:2002/ECE R99:2001, IDT, Ed. 2

SANS Number

(SABS ECE R 80)

(SABS ECE R 81)

(SABS ECE R 82)

(SABS ECE R 83)

(SABS ECE R 86)

(SABS ECE R 91)

(SABS ECE R 98)

(SABS ECE R 99)


October 2009

1

1

2

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Uniform provisions concerning the approval ofpassenger cars powered by an internal combustionengine only, or powered by a hybrid electric powertrain with regard to the measurement of theemission of carbon dioxide and fuel consumptionand/or the measurement of electric energyconsumption and electric range, and of categoriesM1 and N1 vehicles powered by an electric powertrain only with regard to the measurement of electricenergy consumption and electric range

Uniform provisions concerning the approval of retro-reflective markings for vehicles of category M, N andO

Uniform provisions concerning the approval ofcategory M2 or M3 vehicles with regard to theirgeneral construction

Uniform provisions concerning the approval for theproduction of retreaded pneumatic tyres for motorvehicles and their trailers

Uniform provisions concerning the approval for theproduction of retreaded pneumatic tyres forcommercial vehicles and their trailers

Uniform provisions concerning the approval of: I.Specific components of motor vehicles usingcompressed natural gas (CNG) in their propulsionsystem; II. Vehicles with regard to the installation ofspecific components of an approved type for the useof compressed natural gas (CNG) in their propulsionsystem

Uniform provisions concerning the approval of tankvehicles of categories N and O with regard torollover stability

Uniform provisions concerning the approval of motorvehicle headlamps emitting an asymmetricalpassing beam or a driving beam or both andequipped with filament lamps

Uniform provisions concerning the approval ofcornering lamps for power-driven vehicles

Uniform provisions concerning the approval ofwheels for passenger cars and their trailers

Market, opinion and social research - Vocabularyand service requirements

Personal protective equipment - Test methods forfootwear

Personal protective equipment - Safety footwear

Metallic materials - Sheet and strip - Erichsencupping test

Health informatics - Electronic health record -Definition, scope and context

Water safety signs and beach safety flags Part 1:Specifications for water safety signs used inworkplaces and public areas

Title


SANS 20104:1998/ECE R104:1998, IDT, Ed. 1


SANS 20108:1998/ECE R108:1998, IDT, Ed. 1

SANS 20109:1998/ECE R109:1998, IDT, Ed. 1

SANS 20110:2003/ECE R110:2001, IDT, Ed. 1

SANS 20111:2004/ECE R111:2001, IDT, Ed. 1

SANS 20112:2003/ECE R112:2001, IDT, Ed. 1

SANS 20119:2008/ECE R119:2005, IDT, Ed. 1

SANS 20124:2007/ECE R124:2007, IDT, Ed. 1

SANS 20252:2006/ISO 20252:2006, IDT, Ed. 1

SANS 20344:2008/ISO 20344:2004, IDT, Ed. 1

SANS 20345:2008/ISO 20345:2004, IDT, Ed. 1

SANS 20482:2004/ISO 20482:2003, IDT, Ed. 1

SANS 20514:2007/ISO/TR 20514:2005, IDT, Ed. 1

SANS 20712-1:2008/ISO 20712-1:2008, IDT, Ed. 1

SANS Number

(SABS ECE R 104)

(SABS ECE R 108)

(SABS ECE R 109)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Non-destructive testing - Qualification of personnelfor limited applications of non-destructive testing

Environmentally acceptable hand dishwashing andlight duty detergent (liquid)

Footwear - Test methods for stiffeners and toepuffs -Mechanical characteristics

Hard coal - Sampling of slurries

Coal preparation - Determination of dust/moisturerelationship for coal

Software engineering - IFPUG 4.1 Unadjustedfunctional size measurement method - Countingpractices manual

Multilayer piping systems for hot and cold waterinstallations inside buildings Part 1: General

Multilayer piping systems for hot and cold waterinstallations inside buildings Part 2: Pipes

Multilayer piping systems for hot and cold waterinstallations inside buildings Part 3: Fittings

Multilayer piping systems for hot and cold waterinstallations inside buildings Part 5: Fitness forpurpose of the system

Information and documentation - InternationalStandard Text Code (ISTC)

Information and documentation - A referenceontology for the interchange of cultural heritageinformation

Plastics piping systems for non-pressureunderground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinylchloride) (PVC-U), polypropylene (PP) andpolyethylene (PE) Part 1: Material specifications andperformance criteria for pipes, fittings and system

Plastics piping systems for non-pressureunderground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinylchloride) (PVC-U), polypropylene (PP) andpolyethylene (PE) Part 2: Pipes and fittings withsmooth external surface, Type A

Plastics piping systems for non-pressureunderground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinylchloride) (PVC-U), polypropylene (PP) andpolyethylene (PE) Part 3: Pipes and fittings with non-smooth external surface, Type B

Cosmetics - Microbiology - General instructions formicrobiological examination

Cosmetics - Microbiology - Enumeration anddetection of aerobic mesophilic bacteria

Title

SANS 20807:2004/ISO 20807:2004, IDT, Ed. 1

SANS 20825:1993

SANS 20864:2009/ISO 20864:2004, IDT, Ed. 1

SANS 20904:2007/ISO 20904:2006, IDT, Ed. 1

SANS 20905:2006/ISO 20905:2004, IDT, Ed. 1


SANS 21003-1:2008/ISO 21003-1:2007, IDT, Ed. 1

SANS 21003-2:2008/ISO 21003-2:2007, IDT, Ed. 1

SANS 21003-3:2008/ISO 21003-3:2007, IDT, Ed. 1

SANS 21003-5:2008/ISO 21003-5:2007, IDT, Ed. 1

SANS 21047:2009/ISO 21047:2009, IDT, Ed. 1

SANS 21127:2009/ISO 21127:2006, IDT, Ed. 1

SANS 21138-1:2008/ISO 21138-1:2007, IDT, Ed. 1

SANS 21138-2:2008/ISO 21138-2:2007, IDT, Ed. 1

SANS 21138-3:2008/ISO 21138-3:2007, IDT, Ed. 1

SANS 21148:2008/ISO 21148:2005, IDT, Ed. 1

SANS 21149:2008/ISO 21149:2006, IDT, Ed. 1

SANS Number

(SABS 20825)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Light conveyor belts Part 1: Principal characteristicsand applications

Light conveyor belts Part 2: List of equivalent terms

Public key infrastructure for financial services -Practices and policy framework

Hard coal and coke - Guidance to the inspection ofmechanical sampling systems

Small craft - Permanently installed petrol and dieselfuel tanks

Microbiology of food and animal feeding stuffs -Horizontal methods for the detection andenumeration of Enterobacteriaceae Part 1:Detection and enumeration by MPN technique withpre-enrichment

Microbiology of food and animal feeding stuffs -Horizontal methods for the detection andenumeration of Enterobacteriaceae Part 2: Colony-count method

Microbiology of food and animal feeding stuffs -Horizontal method for the detection of Shigella spp

Foodstuffs - Methods of analysis for the detection ofgenetically modified organisms and derived products- Nucleic acid extraction

Foodstuffs - Methods for the detection of geneticallymodified organisms and derived products - Proteinbased methods

Statistical methods - Process performance andcapability statistics for measured qualitycharacteristics

Information technology - Systems securityengineering - Capability Maturity Model (SSE-CMM)

Food safety management systems - Requirementsfor any organization in the food chain

Food safety management systems - Requirementsfor bodies providing audit and certification of foodsafety management systems

Food safety management systems - Guidance onthe application of ISO 22000:2005

Traceability in the feed and food chain - Generalprinciples and basic requirements for system designand implementation

Dentistry - Artificial teeth for dental prostheses

Terminology products and services - Overview andguidance

Practical guidelines for socioterminology

Title

SANS 21183-1:2006/ISO 21183-1:2005, IDT, Ed. 1

SANS 21183-2:2006/ISO 21183-2:2005, IDT, Ed. 1

SANS 21188:2006/ISO 21188:2006, IDT, Ed. 1

SANS 21398:2007/ISO 21398:2007, IDT, Ed. 1

SANS 21487:2009/ISO 21487:2006, IDT, Ed. 1

SANS 21528-1:2005/ISO 21528-1:2004, IDT, Ed. 1

SANS 21528-2:2005/ISO 21528-2:2004, IDT, Ed. 1

SANS 21567:2005/ISO 21567:2004, IDT, Ed. 1

SANS 21571:2006/ISO 21571:2005, IDT, Ed. 1

SANS 21572:2005/ISO 21572:2004, IDT, Ed. 1

SANS 21747:2008/ISO 21747:2006, IDT, Ed. 1


SANS 22000:2005/ISO 22000:2005, IDT, Ed. 1

SANS 22003:2007/ISO/TS 22003:2007, IDT, Ed. 1

SANS 22004:2006/ISO/TS 22004:2005, IDT, Ed. 1

SANS 22005:2009/ISO 22005:2007, IDT, Ed. 1

SANS 22112:2008/ISO 22112:2005, IDT, Ed. 1

SANS 22128:2009/ISO 22128:2008, IDT, Ed. 1

SANS 22134:2008/ISO 22134:2007, IDT, Ed. 1

SANS Number


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

2

1

1

1

Edition

Personal financial planning - Requirements forpersonal financial planners

Financial services - Privacy impact assessment

Information and documentation - Guidelines forstandards drafters for stating records managementrequirements in standards

Plastics piping systems for hot and cold waterinstallations - Polyethylene of raised temperatureresistance (PE-RT) Part 1: General

Plastics piping systems for hot and cold waterinstallations - Polyethylene of raised temperatureresistance (PE-RT) Part 2: Pipes

Plastics piping systems for hot and cold waterinstallations - Polyethylene of raised temperatureresistance (PE-RT) Part 3: Fittings

Plastics piping systems for hot and cold waterinstallations - Polyethylene of raised temperatureresistance (PE-RT) Part 5: Fitness for purpose of thesystem

Ergonomics data and guidelines for the applicationof ISO/IEC Guide 71 to products and services toaddress the needs of older persons and personswith disabilities

Statistical methods in process management -Capability and performance Part 3: Machineperformance studies for measured data on discreteparts

Statistical methods in process management -Capability and performance Part 4: Processcapability estimates and performance measures

Dentistry - Metallic materials for fixed and removablerestorations and appliances

Cosmetics - Microbiology - Detection ofStaphylococcus aureus

Footwear - Test methods for accessories: Metallicaccessories - Corrosion resistance

Document management - Electroniccontent/document management (CDM) datainterchange format

Information and documentation - Recordsmanagement processes - Metadata for records Part1: Principles

Rubber - General procedures for preparing andconditioning test pieces for physical test methods

Elastomeric seals - Requirements for materials forpipe joint seals used in water and drainageapplications - Thermoplastic elastomers

Cranes - Competency requirements for craneinspectors

Title

SANS 22222:2006/ISO 22222:2005, IDT, Ed. 1

SANS 22307:2008/ISO 22307:2008, IDT, Ed. 1

SANS 22310:2006/ISO 22310:2006, IDT, Ed. 1

SANS 22391-1:2008/ISO 22391-1:2007, IDT, Ed. 1

SANS 22391-2:2008/ISO 22391-2:2007, IDT, Ed. 1

SANS 22391-3:2008/ISO 22391-3:2007, IDT, Ed. 1

SANS 22391-5:2008/ISO 22391-5:2007, IDT, Ed. 1

SANS 22411:2009/ISO/TR 22411:2008, IDT, Ed. 1

SANS 22514-3:2009/ISO 22514-3:2008, IDT, Ed. 1

SANS 22514-4:2008/ISO/TR 22514-4:2007, IDT, Ed.1

SANS 22674:2008/ISO 22674:2006, IDT, Ed. 1

SANS 22718:2009/ISO 22718:2006, IDT, Ed. 1

SANS 22775:2009/ISO 22775:2004, IDT, Ed. 1

SANS 22938:2009/ISO 22938:2008, IDT, Ed. 1

SANS 23081-1:2006/ISO 23081-1:2006, IDT, Ed. 1

SANS 23529:2006/ISO 23529:2004, IDT, Ed. 1

SANS 23711:2008/ISO 23711:2003, IDT, Ed. 1

SANS 23814:2009/ISO 23814:2009, IDT, Ed. 1

SANS Number


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Cranes - Training of slingers and signallers

Document management - Monitoring and verificationof information stored on 130 mm optical media

Public transport - Interoperable fare managementsystem Part 1: Architecture

Industrial trucks - Additional requirements forautomated functions on trucks

Industrial trucks - Specifications and test methodsfor operator restraint systems Part 1: Lap-type seatbelts

Dentistry - Mercury and alloys for dental amalgam

Document management - Engineering documentformat using PDF Part 1: Use of PDF 1.6 (PDF/E-1)

Intelligent transport systems - Framework forelectronic registration and identification of vehiclesusing passive radio frequency identification (RFID)

Micrographics - Dimensions for reels used for 16mm and 35 mm microfilm

Software engineering - NESMA functional sizemeasurement method version 2.1 - Definitions andcounting guidelines for the application of FunctionPoint Analysis

Language resource management - Lexical markupframework (LMF)

Information technology - Office machines - Machinesfor colour image reproduction - Method of specifyingimage reproduction of colour devices by digital andanalog test charts

Information technology - Conformance testing forthe biometric application programming interface(BioAPI) Part 1: Methods and procedures

Information technology - Conformance testing forthe biometric application programming interface(BioAPI) Part 2: Test assertions for biometric serviceproviders

Information technology - Radio frequencyidentification for item management - Elementary taglicence plate functionality for ISO/IEC 18000 airinterface definitions

Method for the determination of ink cartridge yieldfor colour inkjet printers and multi-function devicesthat contain printer components

Information technology - Biometric profiles forinteroperability and data interchange Part 1:Overview of biometric systems and biometric profiles

Information technology - Biometric profiles forinteroperability and data interchange Part 2:Physical access control for employees at airports

Title

SANS 23853:2006/ISO 23853:2004, IDT, Ed. 1

SANS 23868:2008/ISO 23868:2008, IDT, Ed. 1

SANS 24014-1:2007/ISO 24014-1:2007, IDT, Ed. 1

SANS 24134:2007/ISO 24134:2006, IDT, Ed. 1

SANS 24135-1:2007/ISO 24135-1:2006, IDT, Ed. 1

SANS 24234:2008/ISO 24234:2004, IDT, Ed. 1

SANS 24517-1:2008/ISO 24517-1:2008, IDT, Ed. 1

SANS 24535:2007

SANS 24537:2007/ISO 24537:2007, IDT, Ed. 1


SANS 24613:2009/ISO 24613:2008, IDT, Ed. 1








SANS Number


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Information technology - Biometrics - Jurisdictionaland societal considerations for commercialapplications Part 1: General guidance

Information technology - Automatic identification anddata capture techniques - Guidelines for direct partmarking (DPM)

Information technology - Biometrics - Multimodal andother multibiometric fusion

Information technology - Automatic identification anddata capture techniques - MicroPDF417 bar codesymbology specification

Information technology - Radio frequencyidentification for item management - Implementationguidelines Part 1: RFID-enabled labels andpackaging supporting ISO/IEC 18000-6C

Information technology - Radio frequencyidentification for item management - Implementationguidelines Part 2: Recycling and RFID tags

Information technology - Real-time locating systems(RTLS) Part 1: Application program interface (API)

Information technology - Real-time locating systems(RTLS) Part 2: 2,4 GHz air interface protocol

Information technology - Biometrics tutorial

Software engineering - Metamodel for developmentmethodologies

Information technology - Security techniques -Guidelines for information and communicationstechnology disaster recovery services

Software engineering - Certification of softwareengineering professionals - Comparison framework

Software and systems engineering - Life cyclemanagement - Guidelines for process description

Information technology - Automatic identification anddata capture techniques - Aztec Code bar codesympology specification

Software Engineering - Software product qualityrequirements and evaluation (SQuaRE) - Guide toSQuaRE

Software engineering - Software product QualityRequirements and Evaluation (SQuaRE) - Planningand management

Software engineering - Software product qualityrequirements and evaluation (SQuaRE) - Dataquality model

Software engineering - Software product QualityRequirements and Evaluation (SQuaRE) -Measurement reference model and guide

Title



















SANS Number


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

2

Edition

Software engineering - Software product QualityRequirements and Evaluation (SQuaRE) - Qualitymeasure elements

Software engineering - Software product QualityRequirements and Evaluation (SQuaRE) - Qualityrequirements

Software engineering - Software product qualityrequirements and evaluation (SQuaRE) -Requirements for quality of Commercial Off-The-Shelf (COTS) software product and instructions fortesting

Cranes - Jib cranes - International standards fordesign, manufacturing, use and maintenancerequirements and recommendations

Exhibitions, shows, fairs and conventions Part 1:Vocabulary

Exhibitions, shows, fairs and conventions Part 2:Measurement procedures for statistical purposes

Information technology - Open Document Format forOffice Applications (OpenDocument) v1.0

Systems and software engineering - Requirementsfor designers and developers of user documentation

Systems engineering - Application and managementof the systems engineering process

Anaesthetic and respiratory equipment - User-applied labels for syringes containing drugs usedduring anaesthesia - Colours, design andperformance

Information technology - Security techniques -Information security management systems -Requirements

Information technology - Security techniques - Codeof practice for information security management

Information technology - Information securitymanagement guidelines for telecommunications

Gel ink ball pens and refills Part 1: General use

Gel ink ball pens and refills Part 2: Documentary use(DOC)

Nanotechnologies - Terminology and definitions fornano-objects - Nanoparticle, nanofibre andnanoplate

Security management systems for the supply chain -Requirements for bodies providing audit andcertification of supply chain security managementsystems

Petroleum, petrochemical and natural gas industries- Sector-specific quality management systems -Requirements for product and service supplyorganizations

Title




SANS 25599:2008/ISO/TR 25599:2005, IDT, Ed. 1

SANS 25639-1:2009/ISO 25639-1:2008, IDT, Ed. 1

SANS 25639-2:2009/ISO 25639-2:2008, IDT, Ed. 1




SANS 26825:2009/ISO 26825:2008, IDT, Ed. 1



SANS 27011:2009/ISO/IEC FDIS 27011:2008, IDT,Ed. 1

SANS 27668-1:2009/ISO 27668-1:2009, IDT, Ed. 1

SANS 27668-2:2009/ISO 27668-2:2009, IDT, Ed. 1

SANS 27687:2008/ISO/TS 27687:2008, IDT, Ed. 1

SANS 28003:2008/ISO 28003:2007, IDT, Ed. 1

SANS 29001:2009/ISO/TS 29001:2007, IDT, Ed. 2

SANS Number


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

2

1

1

1

2

2

Edition

Information technology - Software and systemsengineering - FiSMA 1.1 functional sizemeasurement method

Systems to manage terminology, knowledge, andcontent - TermBase eXchange (TBX)

Document management - Portable document formatPart 1: PDF 1.7

Corporate governance of information technology

Systems and software engineering - Recommendedpractice for architectural description and software-intensive systems

Hot rolled products of structural steels Part 1:General technical delivery conditions

Hot rolled products of structural steels Part 2:Technical delivery conditions for non-alloy structuralsteels

Hot rolled products of structural steels Part 3:Technical delivery conditions fornormalized/normalized rolled weldable fine grainstructural steels

Hot rolled products of structural steels Part 4:Technical delivery conditions for thermomechanicalrolled weldable fine grain structural steels

Hot rolled products of structural steels Part 5:Technical delivery conditions for structural steelswith improved atmospheric corrosion resistance

Hot rolled products of structural steels Part 6:Technical delivery conditions for flat products of highyield strength structural steels in the quenched andtempered condition

Flat products made of steels for pressure purposesPart 1: General requirements

Flat products made of steels for pressure purposesPart 7: Stainless steels

Fire detection and fire alarm systems Part 1:Introduction

Fire detection and fire alarm systems Part 2: Controland indicating equipment

Fire detection and fire alarm systems Part 3: Firealarm devices - Sounders

Fire detection and fire alarm systems Part 4: Powersupply equipment

Fire detection and fire alarm systems Part 5: Heatdetectors - Point detectors

Fire detection and fire alarm systems Part 7: Smokedetectors - Point detectors using scattered light,transmitted light or ionization

Title


SANS 30042:2009/ISO 30042:2008, IDT, Ed. 1

SANS 32000-1:2008/ISO 32000-1:2008, IDT, Ed. 1



SANS 50025-1:2009/EN 10025-1:2004, IDT, Ed. 1

SANS 50025-2:2009/EN 10025-2:2004, IDT, Ed. 1

SANS 50025-3:2009/EN 10025-3:2004, IDT, Ed. 1

SANS 50025-4:2009/EN 10025-4:2004, IDT, Ed. 1

SANS 50025-5:2009/EN 10025-5:2004, IDT, Ed. 1

SANS 50025-6:2009/EN 10025-6:2004, IDT, Ed. 1

SANS 50028-1:2004/EN 10028-1:2000, IDT, Ed. 2

SANS 50028-7:2005/EN 10028-7:2000, MOD, Ed. 1

SANS 50054-1:2009/EN 54-1:1996, IDT, Ed. 2

SANS 50054-2:1997/EN 54-2:1997, IDT

SANS 50054-3:2001/EN 54-3:2001, IDT, Ed. 1

SANS 50054-4:1997/EN 54-4:1997, IDT, Ed. 1

SANS 50054-5:2000/EN 54-5:2000, IDT, Ed. 2

SANS 50054-7:2000/EN 54-7:2000, IDT, Ed. 2

SANS Number

(SABS EN 54-1)

(SABS EN 54-2)

(SABS EN 54-3)

(SABS EN 54-4)

(SABS EN 54-5)

(SABS EN 54-7)


October 2009

1

1

1

1

1

1

1

1

1

1

1

2

1

1

1

1

1

1

2

Edition

Fire detection and fire alarm systems Part 11:Manual call points

Power sources for manual arc welding with limitedduty

Safety rules for the construction and installation oflifts Part 1: Electric lifts

Safety rules for the construction and installation oflifts Part 2: Hydraulic lifts

Safety rules for the construction and installation oflifts Part 3: Electric and hydraulic service lifts

Safety rules for the construction and installation oflifts - Particular applications for passenger andgoods lifts Part 70: Accessibility to lifts for personsincluding persons with disability

Safety rules for the construction and installation oflifts - Particular applications for passenger andgoods lifts Part 72: Fire fighters lifts

Safety rules for the construction and installation oflifts - Existing lifts Part 80: Rules for theimprovement of safety of existing passenger andgoods lifts

Diesel and domestic heating fuels - Determination ofcold filter plugging point

Gully tops and manhole tops for vehicular andpedestrian areas - Design requirements, typetesting, marking, quality control

Respiratory protective devices - Definitions of termsand pictograms

Respiratory protective devices - Classification

Respiratory protective devices - Nomenclature ofcomponents

Respiratory protective devices - List of equivalentterms

Respiratory protective devices - Full face masks -Requirements, testing, marking

Respiratory protective devices - Self-containedopen-circuit compressed air breathing apparatus -Requirements, testing, marking

Respiratory protective devices - Fresh air hosebreathing apparatus for use with full face mask, halfmask or mouthpiece assembly - Requirements,testing, marking

Respiratory protective devices - Half masks andquarter masks - Requirements, testing, marking

Respiratory protective devices - Gas filters andcombined filters - Requirements, testing, marking

Title

SANS 50054-11:2001/EN 54-11:2001, IDT, Ed. 1

SANS 50060:1989/EN 50060:1989, IDT

SANS 50081-1:2004/EN 81-1:1998, IDT, Ed. 2

SANS 50081-2:1998/EN 81-2:1998, IDT, Ed. 2

SANS 50081-3:2005/EN 81-3:2000, IDT, Ed. 1

SANS 50081-70:2004/EN 81-70:2003, IDT, Ed. 1

SANS 50081-72:2005/EN 81-72:2003, IDT, Ed. 1

SANS 50081-80:2005/EN 81-80:2003, IDT, Ed. 1

SANS 50116:2007/EN 116:1997, IDT, Ed. 1

SANS 50124:1994/EN 124:1994, IDT, Ed. 2

SANS 50132:1998/EN 132:1998, IDT, Ed. 3

SANS 50133:2003/EN 133:2001, IDT, Ed. 3

SANS 50134:1998/EN 134:1998, IDT

SANS 50135:1998/EN 135:1998, IDT, Ed. 3

SANS 50136:1998/EN 136:1998, IDT, Ed. 1

SANS 50137:1993/EN 137:1993, IDT

SANS 50138:1994/EN 138:1994, IDT

SANS 50140:1998/EN 140:1998, IDT, Ed. 2

SANS 50141:2003/EN 141:2000, IDT, Ed. 2

SANS Number

(SABS EN 54-11)

(SABS EN 50060)

(SABS EN 81-2)

(SABS EN 124)

(SABS EN 132)

(SABS EN 133)

(SABS EN 134)

(SABS EN 135)

(SABS EN 136)

(SABS EN 137)

(SABS EN 138)

(SABS EN 140)

(SABS EN 141)


October 2009

2

2

2

1

1

1

2

2

2

2

1

2

2

2

1

2

1

2

1

1

Edition

Respiratory protective devices - Mouthpieceassemblies - Requirements, testing, marking

Respiratory protective devices - Particle filters -Requirements, testing, marking

Respiratory protective devices - Gas cylinder valvesPart 1: Thread connections for insert connector

Respiratory protective devices - Gas cylinder valves- Outlet connections

Respiratory protective devices - Self-containedclosed-circuit breathing apparatus - Compressedoxygen or compressed oxygen-nitrogen type -Requirements, testing, marking

Respiratory protective devices - Self-containedclosed-circuit compressed oxygen breathingapparatus for special use - Safety requirements,testing, marking

Respiratory protective devices - Threads forfacepieces Part 1: Standard thread connection

Respiratory protective devices - Threads forfacepieces Part 2: Centre thread connection

Respiratory protective devices - Threads forfacepieces Part 3: Thread connection M 45 x 3

Respiratory protective devices - Filtering half masksto protect against particles - Requirements, testing,marking

Personal eye-protection - Filters for welding andrelated techniques - Transmittance requirementsand recommended utilisation

Methods of testing cement Part 1: Determination ofstrength

Methods of testing cement Part 2: Chemical analysisof cement

Methods of testing cement Part 3: Determination ofsetting times and soundness

Methods of testing cement Part 4: Quantitativedetermination of constituents

Methods of testing cement Part 5: Pozzolanicity testfor pozzolanic cement

Methods of testing cement Part 6: Determination offineness

Methods of testing cement Part 7: Methods of takingand preparing samples of cement

Cement Part 1: Composition, specifications andconformity criteria for common cements

Cement Part 2: Conformity evaluation

Title

SANS 50142:2003/EN 142:2002, IDT, Ed. 2

SANS 50143:2003/EN 143:2000, IDT, Ed. 2

SANS 50144-1:2003/EN 144-1:2000, IDT, Ed. 2

SANS 50144-2:1998/EN 144-2:1998, IDT

SANS 50145:1997/EN 145:1997, IDT, Ed. 2

SANS 50145-2:1992/EN 145-2:1992, IDT

SANS 50148-1:2003/EN 148-1:1999, IDT, Ed. 2

SANS 50148-2:2003/EN 148-2:1999, IDT, Ed. 2

SANS 50148-3:2003/EN 148-3:1999, IDT, Ed. 2

SANS 50149:2003/EN 149:2001, IDT, Ed. 2

SANS 50169:1992/EN 169:1992, IDT

SANS 50196-1:2006/EN 196-1:2005, IDT, Ed. 2

SANS 50196-2:2006/EN 196-2:2005, IDT, Ed. 2

SANS 50196-3:2006/EN 196-3:2005, IDT, Ed. 2

SANS 50196-4:1993/ENV 196-4:1993, MOD

SANS 50196-5:2009/EN 196-5:2005, MOD, Ed. 2

SANS 50196-6:1989/EN 196-6:1989, MOD

SANS 50196-7:2009/EN 196-7:2007, IDT, Ed. 2

SANS 50197-1:2000/EN 197-1:2000, IDT, Ed. 1

SANS 50197-2:2000/EN 197-2:2000, IDT, Ed. 1

SANS Number

(SABS EN 142)

(SABS EN 143)

(SABS EN 144-1)

(SABS EN 144-2)

(SABS EN 145)

(SABS EN 145-2)

(SABS EN 148-1)

(SABS EN 148-2)

(SABS EN 148-3)

(SABS EN 149)

(SABS EN 169)

(SABS EN 196-1)

(SABS EN 196-2)

(SABS EN 196-3)

(SABS ENV 196-4)

(SABS EN 196-5)

(SABS EN 196-6)

(SABS EN 196-7)

(SABS EN 197-1)

(SABS EN 197-2)


October 2009

1

2

1

1

1

1

1

1

1

1

1

1

1

1.01

1.01

1.01

1

1

Edition

Specification for finished baths for domesticpurposes made of acrylic material

Respiratory equipment - Open-circuit self-containedcompressed air diving apparatus - Requirements,testing, marking

Respiratory protective devices - Powered fresh airhose breathing apparatus incorporating a hood -Requirements, testing, marking

Respiratory protective devices - Compressed air linebreathing apparatus incorporating a hood -Requirements, testing, marking

Simple unfired pressure vessels designed to containair or nitrogen Part 1: Pressure vessels for generalpurposes

Simple unfired pressure vessels designed to containair or nitrogen Part 2: Pressure vessels for airbraking and auxiliary systems for motor vehicles andtheir trailers

Simple unfired pressure vessels designed to containair or nitrogen Part 3: Steel pressure vesselsdesigned for air braking equipment and auxiliarypneumatic equipment for railway rolling stock

Simple unfired pressure vessels designed to containair or nitrogen Part 4: Aluminium alloy pressurevessels designed for air braking equipment andauxiliary pneumatic equipment for railway rollingstock

Vitrified clay pipes and fittings and pipe joints fordrains and sewers Part 1: Requirements

Vitrified clay pipes and fittings and pipe joints fordrains and sewers Part 2: Quality control andsampling

Vitrified clay pipes and fittings and pipe joints fordrains and sewers Part 3: Test methods

Particleboards - Specifications

Personal protective equipment against falls from aheight - Descender devices

Hearing protectors - Safety requirements and testingPart 1: Ear-muffs

Hearing protectors - Safety requirements and testingPart 2: Ear-plugs

Hearing protectors - Safety requirements and testingPart 3: Ear-muffs attached to an industrial safetyhelmet

Hearing protectors - Safety requirements and testingPart 5: Active noise reduction ear-muffs

Hearing protectors - Safety requirements and testingPart 6: Ear-muffs with electrical audio input

Title

SANS 50198:1987/EN 198:1987, IDT

SANS 50250:2003/EN 250:2000, IDT, Ed. 2

SANS 50269:1994/EN 269:1994, IDT

SANS 50270:1994/EN 270:1994, IDT

SANS 50286-1:1998/EN 286-1:1998, IDT, Ed. 2

SANS 50286-2:1992/EN 286-2:1992, IDT, Ed. 1

SANS 50286-3:1994/EN 286-3:1994, IDT, Ed. 1

SANS 50286-4:1994/EN 286-4:1994, IDT, Ed. 1

SANS 50295-1:1991/EN 295-1:1991, IDT

SANS 50295-2:1991/EN 295-2:1991, IDT

SANS 50295-3:1991/EN 295-3:1991, IDT

SANS 50312:2007/EN 312:2003, IDT, Ed. 1

SANS 50341:1992/EN 341:1992, IDT, Ed. 1

SANS 50352-1:2008/EN 352-1:1993, MOD, Ed. 1

SANS 50352-2:2008/EN 352-2:1993, MOD, Ed. 1

SANS 50352-3:2008/EN 352-3:1996, MOD, Ed. 1

SANS 50352-5:2005/EN 352-5:2002, IDT, Ed. 1

SANS 50352-6:2005/EN 352-6:2002, IDT, Ed. 1

SANS Number

(SABS EN 198)

(SABS EN 250)

(SABS EN 269)

(SABS EN 270)

(SABS EN 286-1)

(SABS EN 286-2)

(SABS EN 286-3)

(SABS EN 286-4)

(SABS EN 295-1)

(SABS EN 295-2)

(SABS EN 295-3)

(SABS EN 341)

(SABS 50352-1)

(SABS 50352-2)

(SABS 50352-3)


October 2009

1

2

2

2

2

2

2

2

2

2

1

2

1

1

1

1

1

2

Edition

Hearing protectors - Safety requirements and testingPart 7: Level-dependent ear-plugs

Personal protective equipment against falls from aheight - Guided type fall arresters including a rigidanchor line

Personal protective equipment against falls from aheight - Guided type fall arresters including a flexibleanchor line

Personal protective equipment against falls from aheight - Lanyards

Personal protective equipment against falls from aheight - Energy absorbers

Personal protective equipment for work positioningand prevention of falls from a height - Belts for workpositioning and restraint and work positioninglanyards

Personal protective equipment against falls from aheight - Retractable type fall arresters

Personal protective equipment against falls from aheight - Full body harnesses

Personal protective equipment against falls from aheight - Connectors

Personal protective equipment against falls from aheight - Fall arrest systems

Personal protective equipment against falls from aheight - Test methods

Personal protective equipment against falls from aheight - General requirements for instructions foruse, maintenance, periodic examination, repair,marking and packaging

Respiratory protective devices - AX gas filters andcombined filters against low boiling organiccompounds - Requirements, testing, marking

Respiratory protective devices - SX gas filters andcombined filters against specific named compounds- Requirements, testing, marking

Protective clothing for users of hand-held chainsaws Part 1: Test rig for testing resistance to cuttingby a chain saw

Protective clothing for users of hand-held chainsaws Part 2: Test methods for leg protectors

Protective clothing for users of hand-held chainsaws Part 5: Requirements for leg protectors

Respiratory protective devices - Lung governeddemand self-contained open-circuit compressed airbreathing apparatus with full face mask ormouthpiece assembly for escape - Requirements,testing, marking

Title

SANS 50352-7:2005/EN 352-7:2002, IDT, Ed. 1

SANS 50353-1:2003/EN 353-1:2002, IDT, Ed. 2

SANS 50353-2:2003/EN 353-2:2002, IDT, Ed. 2

SANS 50354:2003/EN 354:2002, IDT, Ed. 2

SANS 50355:2003/EN 355:2002, IDT, Ed. 2

SANS 50358:2008/EN 358:1999, IDT, Ed. 2

SANS 50360:2003/EN 360:2002, IDT, Ed. 2

SANS 50361:2003/EN 361:2002, IDT, Ed. 2

SANS 50362:2008/EN 362:2004, IDT, Ed. 2

SANS 50363:2003/EN 363:2002, IDT, Ed. 2

SANS 50364:1992/EN 364:1992, IDT

SANS 50365:2008/EN 365:2004, IDT, Ed. 2

SANS 50371:1992/EN 371:1992, IDT

SANS 50372:1992/EN 372:1992, IDT

SANS 50381-1:1993/EN 381-1:1993, IDT, Ed. 1

SANS 50381-2:1995/EN 381-2:1995, IDT, Ed. 1

SANS 50381-5:1995/EN 381-5:1995, IDT, Ed. 1

SANS 50402:2006/EN 402:2003, IDT, Ed. 2

SANS Number

(SABS EN 353-1)

(SABS EN 353-2)

(SABS EN 354)

(SABS EN 355)

(SABS EN 358)

(SABS EN 360)

(SABS EN 361)

(SABS EN 362)

(SABS EN 363)

(SABS EN 364)

(SABS EN 365)

(SABS EN 371)

(SABS EN 372)

(SABS EN 381-1)

(SABS EN 381-2)

(SABS EN 381-5)

(SABS EN 402)


October 2009

2

2

2

2

2

1

1

2

1

2

1

2

1

1

2

2

2

2

2

1

Edition

Respiratory protective devices for self-rescue -Filtering devices with hood for escape from fire -Requirements, testing, marking

Respiratory protective devices for self-rescue - Filterself-rescuer from carbon monoxide with mouthpieceassembly

Respiratory protective devices - Valved filtering halfmasks to protect against gases or gases andparticles - Requirements, testing, marking

Masonry cement Part 1: Composition, specificationsand conformity criteria

Masonry cement Part 2: Test methods

Helmets for fire fighting in buildings and otherstructures

Basic standard for the evaluation of humanexposure to electromagnetic fields from equipmentfor arc welding and allied processes

Hearing protectors - Recommendations forselection, use, care and maintenance - Guidancedocument

High-visibility warning clothing for professional use -Test methods and requirements

Ductile iron pipes, fittings, accessories and theirjoints for water pipelines - Requirements and testmethods

Mountaineering equipment - Accessory cord - Safetyrequirements and test methods

Mountaineering equipment - Tape - Safetyrequirements and test methods

Mountaineering equipment - Slings - Safetyrequirements and test methods

Mountaineering equipment - Rope clamps - Safetyrequirements and test methods

Glass in building - Basic soda lime silicate glassproducts Part 1: Definitions and general physicaland mechanical properties

Glass in building - Basic soda lime silicate glassproducts Part 2: Float glass

Glass in building - Basic soda lime silicate glassproducts Part 3: Polished wire glass

Glass in building - Basic soda lime silicate glassproducts Part 4: Drawn sheet glass

Glass in building - Basic soda lime silicate glassproducts Part 5: Patterned glass

Aluminium and aluminium alloys - Master alloysproduced by melting - Specifications

Title

SANS 50403:2007/EN 403:2004, IDT, Ed. 2

SANS 50404:2007/EN 404:2005, IDT, Ed. 2

SANS 50405:2003/EN 405:2001, IDT, Ed. 2

SANS 50413-1:2004/EN 413-1:2004, IDT, Ed. 1

SANS 50413-2:2006/EN 413-2:2005, IDT, Ed. 2

SANS 50443:2008/EN 443:2008, IDT, Ed. 2

SANS 50444:2009/EN 50444:2008, IDT, Ed. 1

SANS 50458:2008/EN 458:2004, IDT, Ed. 2

SANS 50471:2006/EN 471:2003, IDT, Ed. 2

SANS 50545:2003/EN 545:2002, IDT, Ed. 2

SANS 50564:1997/EN 564:1997, IDT, Ed. 2

SANS 50565:2008/EN 565:2006, IDT, Ed. 2

SANS 50566:1997/EN 566:1997, IDT, Ed. 2

SANS 50567:1997/EN 567:1997, IDT, Ed. 2

SANS 50572-1:2006/EN 572-1:2004, IDT, Ed. 2

SANS 50572-2:2006/EN 572-2:2004, IDT, Ed. 2

SANS 50572-3:2006/EN 572-3:2004, IDT, Ed. 2

SANS 50572-4:2006/EN 572-4:2004, IDT, Ed. 2

SANS 50572-5:2006/EN 572-5:2004, IDT, Ed. 2

SANS 50575:1995/EN 575:1995, IDT, Ed. 1

SANS Number

(SABS EN 403)

(SABS EN 404)

(SABS EN 405)

(SABS EN 413-2)

(SABS EN 458)

(SABS EN 545)

(SABS EN 564)

(SABS EN 565)

(SABS EN 566)

(SABS EN 567)

(SABS EN 572-1)

(SABS EN 572-2)

(SABS EN 572-3)

(SABS EN 572-4)

(SABS EN 572-5)

(SABS EN 575)


October 2009

2

1

1

1

2

2

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Aluminium and aluminium alloys - Unalloyedaluminium ingots for remelting - Specifications

Plastics piping systems - Plastics pipes and fittings -Determination of the opacity

Thermal spraying - Determination of tensileadhesive strength

Ductile iron pipes, fittings, accessories and theirjoints for sewerage application - Requirements andtest methods

Aluminium and aluminium alloys - Castings -Chemical composition of castings for use in contactwith food

Thermal spraying - Terminology, classification

Elastomeric seals - Material requirements for pipejoint seals used in water and drainage applicationsPart 1: Vulcanized rubber

Thermoplastics piping systems - End-load bearingmechanical joints between pressure pipes andfittings - Test method for resistance to pull-out underconstant longitudinal force

Plastics piping systems - Mechanical joints betweenfittings and polyolefin pressure pipes - Test methodfor leaktightness under internal pressure ofassemblies subjected to bending

Gas welding equipment - Safety devices Part 1:Incorporating a flame (flashback) arrestor

Plastics piping and ducting systems -Thermoplastics pipes - Determination of thelongitudinal reversion

Aluminium and aluminium alloys - Extruded rod/bar,tube and profiles Part 2: Mechanical properties

Aluminium and aluminium alloys - Extruded rod/bar,tube and profiles Part 7: Seamless tubes, toleranceson dimensions and form

Specification for masonry units Part 4: Autoclavedaerated concrete masonry units

Protection against falls from a height - Anchordevices - Requirements and testing

Personal protective equipment for prevention of fallsfrom a height - Sit harnesses

Short link chain for lifting purposes - Safety Part 4:Chain slings - Grade 8

Short link chain for lifting purposes - Safety Part 6:Chain slings - Specification for information for useand maintenance to be provided by themanufacturer

Separator systems for light liquids (e.g. oil andpetrol) Part 1: Principles of product design,performance and testing, marking and quality control

Title

SANS 50576:2008/EN 576:2003, IDT, Ed. 2

SANS 50578:1993/EN 578:1993, IDT, Ed. 1

SANS 50582:1993/EN 582:1993, IDT

SANS 50598:1994/EN 598:1994, IDT, Ed. 1

SANS 50601:2008/EN 601:2004, IDT, Ed. 2

SANS 50657:2009/EN 657:2005, IDT, Ed. 2

SANS 50681-1:1996/EN 681-1:1996, IDT, Ed. 2

SANS 50712:1993/EN 712:1993, IDT, Ed. 1

SANS 50713:1993/EN 713:1993, IDT, Ed. 1

SANS 50730-1:2004/EN 730-1:2002, IDT, Ed. 1

SANS 50743:1994/EN 743:1994, IDT, Ed. 1

SANS 50755-2:2005/EN 755-2:1997, IDT, Ed. 1

SANS 50755-7:2005/EN 755-7:1998, IDT, Ed. 1

SANS 50771-4:2007/EN 771-4:2003, IDT, Ed. 2

SANS 50795:1996/EN 795:1996, IDT, Ed. 1

SANS 50813:1997/EN 813:1997, IDT, Ed. 1

SANS 50818-4:2007/EN 818-4:1996, IDT, Ed. 1

SANS 50818-6:2000/EN 818-6:2000, IDT, Ed. 1

SANS 50858-1:2002/EN 858-1:2002, IDT, Ed. 1

SANS Number

(SABS EN 576)

(SABS EN 578)

(SABS EN 582)

(SABS EN 598)

(SABS EN 601)

(SABS EN 657)

(SABS EN 681-1)

(SABS EN 712)

(SABS EN 713)

(SABS EN 743)

(SABS EN 795)

(SABS EN 813)

(SABS EN 818-6)

(SABS EN 858-1)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Separator systems for light liquids (e.g. oil andpetrol) Part 2: Selection of nominal size, installation,operation and maintenance

Packaging materials and systems for medicaldevices which are to be sterilized Part 2: Sterilizationwrap - Requirements and test methods

Packaging materials and systems for medicaldevices which are to be sterilized Part 3: Paper foruse in the manufacture of paper bags (specified inSANS 50868-4/EN 868-4) and in the manufacture ofpouches and reels (specified in SANS 50868-5/EN868-5) - Requirements and test methods

Packaging materials and systems for medicaldevices which are to be sterilized Part 4: Paper bags- Requirements and test methods

Packaging materials and systems for medicaldevices which are to be sterilized Part 5: Heat andself-sealable pouches and reels of paper and plasticfilm construction - Requirements and test methods

Packaging materials and systems for medicaldevices which are to be sterilized Part 6: Paper forthe manufacture of packs for medical use forsterilization by ethylene oxide or irradiation -Requirements and test methods

Packaging materials and systems for medicaldevices which are to be sterilized Part 7: Adhesivecoated paper for the manufacture of heat sealablepacks for medical use for sterilization by ethyleneoxide or irradiation - Requirements and test methods

Packaging materials and systems for medicaldevices which are to be sterilized Part 8: Re-usablesterilization containers for steam sterilizersconforming to EN 285 - Requirements and testmethods

Packaging materials and systems for medicaldevices which are to be sterilized Part 9: Uncoatednonwoven materials of polyolefines for use in themanufacture of heat sealable pouches, reels andlids - Requirements and test methods

Packaging materials and systems for medicaldevices which are to be sterilized Part 10: Adhesivecoated nonwoven materials of polyolefines for use inthe manufacture of heat sealable pouches, reels andlids - Requirements and test methods

Chemicals used for treatment of water intended forhuman consumption - Aluminium sulfate

Chemicals used for treatment of water intended forhuman consumption - Aluminium chloride(monomeric), aluminium chloride hydroxide(monomeric) and aluminium chloride hydroxidesulfate (monomeric)

Chemicals used for treatment of water intended forhuman consumption - Sodium aluminate

Chemicals used for treatment of water intended forhuman consumption - Polyaluminium chloridehydroxide and polyaluminium chloride hydroxidesulfate

Title

SANS 50858-2:2003/EN 858-2:2003, IDT, Ed. 1

SANS 50868-2:2003/EN 868-2:1999, IDT, Ed. 1

SANS 50868-3:2003/EN 868-3:1999, IDT, Ed. 1

SANS 50868-4:2003/EN 868-4:1999, IDT, Ed. 1

SANS 50868-5:2003/EN 868-5:1999, IDT, Ed. 1

SANS 50868-6:2003/EN 868-6:1999, IDT, Ed. 1

SANS 50868-7:2003/EN 868-7:1999, IDT, Ed. 1

SANS 50868-8:2003/EN 868-8:1999, IDT, Ed. 1

SANS 50868-9:2003/EN 868-9:2000, IDT, Ed. 1

SANS 50868-10:2003/EN 868-10:2000, IDT, Ed. 1

SANS 50878:2008/EN 878:2004, IDT, Ed. 2

SANS 50881:2007/EN 881:2004, IDT, Ed. 2

SANS 50882:2008/EN 882:2004, IDT, Ed. 2

SANS 50883:2007/EN 883:2004, IDT, Ed. 2

SANS Number


October 2009

1

1

1

1

1

1

1

2

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Chemicals used for treatment of water intended forhuman consumption - Poyaluminium chloridehydroxide silicate

Chemicals used for treatment of water intended forhuman consumption - Poyaluminium hydroxidesilicate sulfate

Chemicals used for treatment of water intended forhuman consumption - Aluminium iron (III) sulfate

Chemicals used for treatment of water intended forhuman consumption - Iron (III) chloride

Chemicals used for treatment of water intended forhuman consumption - Iron (II) sulfate

Chemicals used for treatment of water intended forhuman consumption - Iron (III) sulfate liquid

Chemicals used for treatment of water intended forhuman consumption - Iron (III) chloride sulfate

Mountaineering equipment - Dynamicmountaineering ropes - Safety requirements andtest methods

Chemicals used for treatment of water intended forhuman consumption - Sodium hydroxide

Chemicals used for treatment of water intended forhuman consumption - Sodium carbonate

Chemicals used for treatment of water intended forhuman consumption - Sodium hydrogen carbonate

Chemicals used for treatment of water intended forhuman consumption - Sulfuric acid

Chemicals used for treatment of water intended forhuman consumption - Sodium hypochlorite

Chemicals used for treatment of water intended forhuman consumption - Hydrogen peroxide

Chemicals used for treatment of water intended forhuman consumption - Aluminium iron (lll) chloride(monomeric) and aluminium iron (lll) chloridehydroxide (monomeric)

Chemicals used for treatment of water intended forhuman consumption - Carbon dioxide

Chemicals used for treatment of water intended forhuman consumption - Chlorine

Chemicals used for treatment of water intended forhuman consumption - Sodium chlorite

Textile floor coverings - Determination of the sidelength, squareness and straightness of tiles

Mobile access and working towers made ofprefabricated elements - Materials, dimensions,design loads, safety and performance requirements

Title

SANS 50885:2007/EN 885:2004, IDT, Ed. 2

SANS 50886:2007/EN 886:2004, IDT, Ed. 2

SANS 50887:2008/EN 887:2004, IDT, Ed. 2

SANS 50888:2008/EN 888:2004, IDT, Ed. 2

SANS 50889:2008/EN 889:2004, IDT, Ed. 2

SANS 50890:2008/EN 890:2004, IDT, Ed. 2

SANS 50891:2008/EN 891:2004, IDT, Ed. 2

SANS 50892:2007/EN 892:2004, IDT, Ed. 2

SANS 50896:2007/EN 896:2005, IDT, Ed. 2

SANS 50897:2007/EN 897:2005, IDT, Ed. 2

SANS 50898:2007/EN 898:2005, IDT, Ed. 2

SANS 50899:2008/EN 899:2003, IDT, Ed. 2

SANS 50901:1999/EN 901:1999, IDT, Ed. 1

SANS 50902:1999/EN 902:1999, IDT, Ed. 1

SANS 50935:2008/EN 935:2004, IDT, Ed. 2

SANS 50936:2008/EN 936:2006, IDT, Ed. 2

SANS 50937:2007/EN 937:1999, IDT, Ed. 1

SANS 50938:1999/EN 938:1999, IDT, Ed. 1

SANS 50994:2003/EN 994:1995, IDT, Ed. 1

SANS 51004:2009/EN 1004:2004, IDT, Ed. 1

SANS Number

(SABS EN 892)

(SABS EN 901)

(SABS EN 902)

(SABS EN 938)


October 2009

1

2

2

1

1

1

1

1

2

1

2

1

1

1

1

1

1

Edition

Mixing water for concrete - Specification forsampling, testing and assessing the suitability ofwater, including water recovered from processes inthe concrete industry, as mixing water for concrete

Furniture - Assessment of the ignitability ofupholstered furniture Part 1: Ignition sourcesmouldering cigarette

Furniture - Assessment of the ignitability ofupholstered furniture Part 2: Ignition source matchflame equivalent

Timber structures - Test methods - Joints made withpunched metal plate fasteners

Pipes and fittings of longitudinally welded stainlesssteel pipes with spigot and socket for waste watersystems Part 1: Requirements, testing, qualitycontrol

Pipes and fittings of longitudinally welded stainlesssteel pipes with spigot and socket for waste watersystems Part 2: System S - Dimensions

Pipes and fittings of longitudinally welded stainlesssteel pipes with spigot and socket for waste watersystems Part 3: System X - Dimensions

Pipes and fittings of longitudinally welded stainlesssteel pipes with spigot and socket for waste watersystems Part 4: Components for vacuum drainagesystems and for drainage systems on ships

Respiratory protective devices - Self-containedopen-circuit compressed air breathing apparatusincorporating a hood for escape - Requirements,testing, marking

Chemicals used for treatment of water intended forhuman consumption - Sodium silicate

Thermal spraying - Powders - Composition,technical supply conditions

Chemical disinfectants and antiseptics - Quantitativesuspension test for the evaluation of bactericidalactivity of chemical disinfectants and antisepticsused in food, industrial, domestic, and institutionalareas - Test method and requirements (phase 2,step 1)

Chemicals used for treatment of water intended forhuman consumption - Ozone

Chemicals used for treatment of water intended forhuman consumption - Aluminium-based coagulants- Analytical methods

Road restraint systems Part 2: Performanceclasses, impact test acceptance criteria and testmethods for safety barriers

Thermal spraying - Acceptance inspection ofthermal spraying equipment

Thermal spraying - Acceptance inspection ofthermal spraying equipment Part 1: Generalrequirements

Title

SANS 51008:2006/EN 1008:2002, IDT, Ed. 1

SANS 51021-1:2006/EN 1021-1:2006, IDT, Ed. 2

SANS 51021-2:2006/EN 1021-2:2006, IDT, Ed. 2

SANS 51075:1999/EN 1075:1999, IDT, Ed. 1

SANS 51124-1:2008/EN 1124-1:1999, IDT, Ed. 1

SANS 51124-2:2008/EN 1124-2:2007, IDT, Ed. 2

SANS 51124-3:2008/EN 1124-3:1999, IDT, Ed. 1

SANS 51124-4:2008/EN 1124-4:2005, IDT, Ed. 1

SANS 51146:2006/EN 1146:2005, IDT, Ed. 2

SANS 51209:2007/EN 1209:2003, IDT, Ed. 2

SANS 51274:2009/EN 1274:2004, IDT, Ed. 2

SANS 51276:2006/EN 1276:1997, IDT, Ed. 1

SANS 51278:2008/EN 1278:1998, IDT, Ed. 1

SANS 51302:2007/EN 1302:1999, IDT, Ed. 1

SANS 51317-2:2009/EN 1317-2:1998, IDT, Ed. 1

SANS 51395:1996/EN 1395:1996, IDT

SANS 51395-1:2009/EN 1395-1:2007, IDT, Ed. 1

SANS Number

(SABS EN 1021-1)

(SABS EN 1021-2)

(SABS EN 1075)

(SABS EN 1146)

(SABS EN 1274)

(SABS EN 1395)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

2

Edition

Thermal spraying - Acceptance inspection ofthermal spraying equipment Part 2: Flame sprayingincluding HVOF

Thermal spraying - Acceptance inspection ofthermal spraying equipment Part 3: Arc spraying

Thermal spraying - Acceptance inspection ofthermal spraying equipment Part 4: Plasma spraying

Thermal spraying - Acceptance inspection ofthermal spraying equipment Part 5: Plasma sprayingin chambers

Thermal spraying - Acceptance inspection ofthermal spraying equipment Part 6: Manipulatorsystems

Thermal spraying - Acceptance inspection ofthermal spraying equipment Part 7: Powder feedsystems

Chemicals used for treatment of water intended forhuman consumption - Anionic and non-ionicpolyacrylamides

Chemicals used for treatment of water intended forhuman consumption - Polyamines

Chemicals used for treatment of water intended forhuman consumption - Cationic polyacrylamides

Road marking materials - Drop on materials - Glassbeads, antiskid aggregates and mixtures of the two

Road marking materials - Premix glass beads

Welding consumables - Covered electrodes formanual metal arc welding of stainless and heatresisting steels - Classification

Sterile urethral catheters for single use

Chemical disinfectants and antiseptics - Quantitativesuspension test for the evaluation of fungicidalactivity of chemical disinfectants and antisepticsused in food, industrial, domestic, and institutionalareas - Test method and requirements (phase 2,step 1)

Aluminium and aluminium alloys - Alloyed ingots forremelting - Specifications

Aluminium and aluminium alloys - Castings -Chemical composition and mechanical properties

Non-destructive testing of welds - Ultrasonic testingof welded joints

Aluminium and aluminium alloys - Designation ofalloyed aluminium ingots for remelting, master alloysand castings Part 1: Numerical designation system

Title

SANS 51395-2:2009/EN 1395-2:2007, IDT, Ed. 1

SANS 51395-3:2009/EN 1395-3:2007, IDT, Ed. 1

SANS 51395-4:2009/EN 1395-4:2007, IDT, Ed. 1

SANS 51395-5:2009/EN 1395-5:2007, IDT, Ed. 1

SANS 51395-6:2009/EN 1395-6:2007, IDT, Ed. 1

SANS 51395-7:2009/EN 1395-7:2007, IDT, Ed. 1

SANS 51407:2007/EN 1407:1998, IDT, Ed. 1

SANS 51409:2007/EN 1409:1998, IDT, Ed. 1

SANS 51410:2007/EN 1410:1998, IDT, Ed. 1

SANS 51423:1997/EN 1423:1997, IDT

SANS 51424:1997/EN 1424:1997, IDT, Ed. 1

SANS 51600:1997/EN 1600:1997, IDT, Ed. 1

SANS 51616:1997/EN 1616:1997, IDT

SANS 51650:2006/EN 1650:1997, IDT, Ed. 1

SANS 51676:1996/EN 1676:1996, IDT, Ed. 1

SANS 51706:1998/EN 1706:1998, IDT, Ed. 1

SANS 51714:2005/EN 1714:1997, IDT, Ed. 1

SANS 51780-1:2008/EN 1780-1:2002, IDT, Ed. 2

SANS Number

(SABS EN 1423)

(SABS EN 1424)

(SABS EN 1600)

(SABS EN 1616)

(SABS EN 1676)

(SABS EN 1706)

(SABS EN 1780-1)


October 2009

2

2

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Aluminium and aluminium alloys - Designation ofalloyed aluminium ingots for remelting, master alloysand castings Part 2: Chemical symbol baseddesignation system

Aluminium and aluminium alloys - Designation ofalloyed aluminium ingots for remelting, master alloysand castings Part 3: Writing rules for chemicalcomposition

Safety requirements on suspended accessequipment - Design calculations, stability criteria,construction - Tests

Respiratory protective devices - Half masks withoutinhalation valves and with separable filters to protectagainst gases or gases and particles or particlesonly - Requirements, testing, marking

Respiratory protective devices - Light dutyconstruction compressed air line breathingapparatus incorporating a helmet or a hood -Requirements, testing, marking

Personal protective equipment for the prevention offalls from a height - Low stretch kernmantel ropes

Fixed firefighting systems - Components for gasextinguishing systems Part 1: Requirements and testmethods for electrical automatic control and delaydevices

Fixed firefighting systems - Components for gasextinguishing systems Part 2: Requirements and testmethods for non-electrical automatic control anddelay devices

Fixed firefighting systems - Components for gasextinguishing systems Part 3: Requirements and testmethods for manual triggering and stop devices

Fixed firefighting systems - Components for gasextinguishing systems Part 4: Requirements and testmethods for container valve assemblies and theiractuators

Chemicals used for treatment of water intended forhuman consumption - Ammonia solution

Load restraint assemblies on road vehicles - SafetyPart 2: Web lashing made from man-made fibres

Load restraint assemblies on road vehicles - SafetyPart 3: Lashing chains

Load restraint assemblies on road vehicles - SafetyPart 4: Lashing steel wire ropes

Chemicals used for treatment of water intended forhuman consumption - Copper sulfate

Chemicals used for treatment of water intended forhuman consumption - Calcium carbonite, high-calcium lime and half-burnt dolomite - Test methods

Small wastewater treatment systems for up to 50 PTPart 1: Prefabricated septic tanks

Title

SANS 51780-2:2008/EN 1780-2:2002, IDT, Ed. 2

SANS 51780-3:2008/EN 1780-3:2002, IDT, Ed. 2

SANS 51808:1999/EN 1808:1999, IDT, Ed. 1

SANS 51827:2004/EN 1827:1999, IDT, Ed. 1

SANS 51835:2004/EN 1835:1999, IDT, Ed. 1

SANS 51891:1998/EN 1891:1998, IDT, Ed. 1

SANS 52094-1:2009/EN 12094-1:2003, IDT, Ed. 1

SANS 52094-2:2009/EN 12094-2:2003, IDT, Ed. 1

SANS 52094-3:2009/EN 12094-3:2003, IDT, Ed. 1

SANS 52094-4:2009/EN 12094-4:2004, IDT, Ed. 1

SANS 52122:2007/EN 12122:2005, IDT, Ed. 2

SANS 52195-2:2007/EN 12195-2:2000, IDT, Ed. 1

SANS 52195-3:2007/EN 12195-3:2001, IDT, Ed. 1

SANS 52195-4:2007/EN 12195-4:2003, IDT, Ed. 1

SANS 52386:2007/EN 12386:2005, IDT, Ed. 2

SANS 52485:2007/EN 12485:2001, IDT, Ed. 1

SANS 52566-1:2004/EN 12566-1:2000, IDT, Ed. 1

SANS Number

(SABS EN 1780-2)

(SABS EN 1780-3)

(SABS EN 1808)

(SABS EN 1891)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Liquid petroleum products - Determination ofcontamination in middle distillates

Chemicals used for treatment of water intended forhuman consumption - Chlorine dioxide

Chemicals used for treatment of water intended forhuman consumption - Potassium permanganate

Raised access floors

Ductile iron fittings for PVC-U or PE piping systems -Requirements and test methods

Chemicals used for treatment of water intended forhuman consumption - Oxygen

Road transport and traffic telematics - Publictransport - Reference data model

Products used for treatment of water intended forhuman consumption - Inorganic supporting andfiltering materials - Definitions

Products used for treatment of water intended forhuman consumption - Inorganic supporting andfiltering materials - Methods of test

Products used for treatment of water intended forhuman consumption - Powdered activated carbon

Products used for treatment of water intended forhuman consumption - Silica sand and silica gravel

Products used for the treatment of water intendedfor human consumption - Granular activated carbonPart 1: Virgin granular activated carbon

Products used for the treatment of water intendedfor human consumption - Granular activated carbonPart 2: Reactivated granular activated carbon

Chemicals used for treatment of water intended forhuman consumption - Chemicals for emergency use- Sodium dichloroisocyanurate, anhydrous

Chemicals used for treatment of water intended forhuman consumption - Chemicals for emergency use- Sodium dichloroisocyanurate, dihydrate

Chemicals used for treatment of water intended forhuman consumption - Chemicals for emergency use- Trichloroisocyanuric acid

GRP tanks and vessels for use above ground Part 1:Raw materials - Specification conditions andacceptance conditions

GRP tanks and vessels for use above ground Part 2:Composite materials - Chemical resistance

GRP tanks and vessels for use above ground Part 3:Design and workmanship

GRP tanks and vessels for use above ground Part 4:Delivery, installation and maintenance

Title

SANS 52662:2007/EN 12662:1998, IDT, Ed. 1

SANS 52671:2007/EN 12671:2000, IDT, Ed. 1

SANS 52672:2007/EN 12672:2000, IDT, Ed. 1

SANS 52825:2009/EN 12825:2001, IDT, Ed. 1

SANS 52842:2007/EN 12842:2000, IDT, Ed. 1

SANS 52876:2008/EN 12876:2000, IDT, Ed. 1

SANS 52896:2008/EN 12896:2006, IDT, Ed. 1

SANS 52901:2007/EN 12901:1999, IDT, Ed. 1

SANS 52902:2007/EN 12902:2004, IDT, Ed. 2

SANS 52903:2007/EN 12903:2003, IDT, Ed. 2

SANS 52904:2007/EN 12904:2005, IDT, Ed. 2

SANS 52915-1:2008/EN 12915-1:2003, IDT, Ed. 1

SANS 52915-2:2008/EN 12915-2:2003, IDT, Ed. 1

SANS 52931:2008/EN 12931:2000, IDT, Ed. 1

SANS 52932:2008/EN 12932:2000, IDT, Ed. 1

SANS 52933:2008/EN 12933:2000, IDT, Ed. 1

SANS 53121-1:2009/EN 13121-1:2003, IDT, Ed. 1

SANS 53121-2:2009/EN 13121-2:2003, IDT, Ed. 1

SANS 53121-3:2009/EN 13121-3:2008, IDT, Ed. 1

SANS 53121-4:2009/EN 13121-4:2005, IDT, Ed. 1

SANS Number


October 2009

1

2

2

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Buoyant aids for swimming instruction Part 1: Safetyrequirements and test methods for buoyant aids tobe worn

Buoyant aids for swimming instruction Part 2: Safetyrequirements and test methods for buoyant aids tobe held

Buoyant aids for swimming instruction Part 3: Safetyrequirements and test methods for swim seats to beworn

Public transport - Road vehicle scheduling andcontrol systems Part 1: WORLDFIP definition andapplication rules for onboard data transmission

Public transport - Road vehicle scheduling andcontrol systems Part 2: WORLDFIP cablingspecifications

Public transport - Road vehicle scheduling andcontrol systems Part 3: WorldFIP message content

Public transport - Road vehicle scheduling andcontrol systems Part 4: General application rules forCANopen transmission buses

Public transport - Road vehicle scheduling andcontrol systems Part 5: CANopen cablingspecifications

Public transport - Road vehicle scheduling andcontrol systems Part 6: CAN message content

Specification for glass fibre reinforced cisterns ofone-piece and sectional construction, for thestorage, above ground, of cold water

Maintenance terminology

Road Transport and Traffic Telmatics (RTTT) -Dedicated short-range communication - Profiles forRTTT applications

Cathodic protection measurement techniques

Explosives for civil uses - High explosives Part 14:Determination of velocity of detonation

Chemical disinfectants - Quantitative suspensiontest for the evaluation of sporicidal activity ofchemical disinfectants used in food, industrial,domestic, and institutional areas - Test method andrequirements (phase 2, step 1)

Products used for treatment of water intended forhuman consumption - Bentonite

Explosives for civil uses - Detonators and relays Part1: Requirements

Explosives for civil uses - Detonators and relays Part2: Determination of thermal stability

Title

SANS 53138-1:2007/EN 13138-1:2003, IDT, Ed. 1

SANS 53138-2:2009/EN 13138-2:2007, IDT, Ed. 2

SANS 53138-3:2009/EN 13138-3:2007, IDT, Ed. 2

SANS 53149-1:2009/EN 13149-1:2004, IDT, Ed. 1

SANS 53149-2:2009/EN 13149-2:2004, IDT, Ed. 1

SANS 53149-3:2009/CEN/TS 13149-3:2007, IDT, Ed.1

SANS 53149-4:2009/EN 13149-4:2004, IDT, Ed. 1

SANS 53149-5:2009/EN 13149-5:2004, IDT, Ed. 1

SANS 53149-6:2008/CEN/TS 13149-6:2005, IDT, Ed.1

SANS 53280:2009/EN 13280:2001, IDT, Ed. 1

SANS 53306:2008/EN 13306:2001, IDT, Ed. 1

SANS 53372:2009/EN 13372:2004, IDT, Ed. 1

SANS 53509:2009/EN 13509:2003, IDT, Ed. 1

SANS 53631-14:2006/EN 13631-14:2003, IDT, Ed. 1

SANS 53704:2006/EN 13704:2002, IDT, Ed. 1

SANS 53754:2008/EN 13754:2003, IDT, Ed. 1

SANS 53763-1:2008/EN 13763-1:2004, IDT, Ed. 1

SANS 53763-2:2008/EN 13763-2:2002, IDT, Ed. 1

SANS Number


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Explosives for civil uses - Detonators and relays Part3: Determination of sensitiveness to impact

Explosives for civil uses - Detonators and relays Part4: Determination of resistance to abrasion of leadingwires and shock tubes

Explosives for civil uses - Detonators and relays Part5: Determination of resistance to cutting damage ofleading wires and shock tubes

Explosives for civil uses - Detonators and relays Part6: Determination of resistance to cracking in lowtemperatures of leading wires

Explosives for civil uses - Detonators and relays Part7: Determination of the mechanical strength ofleading wires, shock tubes, connections, crimps andclosures

Explosives for civil uses - Detonators and relays Part8: Determination of the resistance to vibration ofplain detonators

Explosives for civil uses - Detonators and relays Part11: Determination of resistance to damage bydropping of detonators and relays

Explosives for civil uses - Detonators and relays Part12: Determination of resistance to hydrostaticpressure

Explosives for civil uses - Detonators and relays Part13: Determination of resistance of electricdetonators to electrostatic discharge

Explosives for civil uses - Detonators and relays Part15: Determination of equivalent initiating capability

Explosives for civil uses - Detonators and relays Part16: Determination of delay accuracy

Explosives for civil uses - Detonators and relays Part17: Determination of no-fire current of electricdetonators

Explosives for civil uses - Detonators and relays Part18: Determination of series firing current of electricdetonators

Explosives for civil uses - Detonators and relays Part19: Determination of firing impulse of electricdetonators

Explosives for civil uses - Detonators and relays Part20: Determination of total electrical resistance ofelectric detonators

Explosives for civil uses - Detonators and relays Part21: Determination of flash-over voltage of electricdetonators

Explosives for civil uses - Detonators and relays Part24: Determination of the electrical non-conductivityof shock tube

Explosives for civil uses - Detonators and relays Part26: Definitions, methods and requirements fordevices and accessories for reliable and safefunction of detonators and relays

Title

SANS 53763-3:2008/EN 13763-3:2002, IDT, Ed. 1

SANS 53763-4:2008/EN 13763-4:2003, IDT, Ed. 1

SANS 53763-5:2008/EN 13763-5:2003, IDT, Ed. 1

SANS 53763-6:2008/EN 13763-6:2003, IDT, Ed. 1

SANS 53763-7:2008/EN 13763-7:2003, IDT, Ed. 1

SANS 53763-8:2008/EN 13763-8:2003, IDT, Ed. 1

SANS 53763-11:2008/EN 13763-11:2003, IDT, Ed. 1

SANS 53763-12:2006/EN 13763-12:2003, IDT, Ed. 1

SANS 53763-13:2006/EN 13763-13:2004, IDT, Ed. 1

SANS 53763-15:2008/EN 13763-15:2004, IDT, Ed. 1

SANS 53763-16:2006/EN 13763-16:2003, IDT, Ed. 1

SANS 53763-17:2006/EN 13763-17:2003, IDT, Ed. 1

SANS 53763-18:2006/EN 13763-18:2003, IDT, Ed. 1

SANS 53763-19:2008/EN 13763-19:2003, IDT, Ed. 1

SANS 53763-20:2006/EN 13763-20:2003, IDT, Ed. 1

SANS 53763-21:2008/EN 13763-21:2003, IDT, Ed. 1

SANS 53763-24:2008/EN 13763-24:2002, IDT, Ed. 1

SANS 53763-26:2008/EN 13763-26:2004, IDT, Ed. 1

SANS Number


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Explosives for civil uses - Detonators and relays Part27: Definitions, methods and requirements forelectronic initiation systems

Respiratory protective devices - Self-containedclosed-circuit breathing apparatus for escape -Requirements, testing, marking

Sherardizing - Zinc diffusion coatings on ferrousproducts - Specification

Explosives for civil uses Part 1: Terminology

Filament-wound FRP pressure vessels - Materials,design, manufacturing and testing

Road transport and traffic telematics - Publictransport - Non-interactive dynamic passengerinformation on ground

Fat and oil derivatives - Fatty Acid Methyl Esters(FAME) - Determination of ester and linolenic acidmethyl ester contents

Fat and oil derivatives - Fatty Acid Methyl Esters(FAME) - Determination of acid value

Fat and oil derivatives - Fatty Acid Methyl Esters(FAME) - Determination of free and total glyceroland mono-, di-, triglyceride content (Referencemethod)

Fat and oil derivatives - Fatty Acid Methyl Esters(FAME) - Determination of free glycerol content

Fat and oil derivatives - Fatty Acid Methyl Esters(FAME) - Determination of phosphorus content byinductively coupled plasma (ICP) emissionspectrometry

Fat and oil derivatives - Fatty Acid Methyl Esters(FAME) - Determination of sodium content by atomicabsorption spectrometry

Fat and oil derivatives - Fatty Acid Methyl Esters(FAME) - Determination of potassium content byatomic absorption spectrometry

Fat and oil derivatives - Fatty Acid Methyl Esters(FAME) - Determination of methanol content

Fat and oil derivatives - Fatty Acid Methyl Esters(FAME) - Determination of iodine value

Fat and oil derivatives - Fatty Acid Methyl Esters(FAME) - Determination of oxidation stability(accelerated oxidation test)

Respiratory protective devices - Gas filter(s) andcombined filter(s) - Requirements, testing, marking

Respiratory protective devices - Compressed air linebreathing apparatus with demand valve Part 1:Apparatus with a full face mask - Requirements,testing, marking

Title

SANS 53763-27:2008/CEN/TS 13763-27:2003, IDT,Ed. 1

SANS 53794:2007/EN 13794:2002, IDT, Ed. 1

SANS 53811:2006/EN 13811:2003, IDT, Ed. 1

SANS 53857-1:2008/EN 13857-1:2003, IDT, Ed. 1

SANS 53923:2009/EN 53923:2005, IDT, Ed. 1

SANS 53998:2008/ENV 13998:2001, IDT, Ed. 1

SANS 54103:2007/EN 14103:2003, IDT, Ed. 1

SANS 54104:2007/EN 14104:2003, IDT, Ed. 1

SANS 54105:2007/EN 14105:2003, IDT, Ed. 1

SANS 54106:2007/EN 14106:2003, IDT, Ed. 1

SANS 54107:2007/EN 14107:2003, IDT, Ed. 1

SANS 54108:2007/EN 14108:2003, IDT, Ed. 1

SANS 54109:2007/EN 14109:2003, IDT, Ed. 1

SANS 54110:2007/EN 14110:2003, IDT, Ed. 1

SANS 54111:2007/EN 14111:2003, IDT, Ed. 1

SANS 54112:2007/EN 14112:2003, IDT, Ed. 1

SANS 54387:2007/EN 14387:2004, IDT, Ed. 1

SANS 54593-1:2006/EN 14593-1:2005, IDT, Ed. 1

SANS Number


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

3

1

Edition

Respiratory protective devices - Compressed air linebreathing apparatus with demand valve Part 2:Apparatus with a half mask at positive pressure -Requirements, testing, marking

Respiratory protective devices - Continuous flowcompressed air line breathing apparatus -Requirements, testing, marking

Traffic and Travel Information (TTI) - TTI messagesvia cellular networks Part 1: General specifications

Traffic and Travel Information (TTI) - TTI messagesvia cellular networks Part 2: Numbering and ADPmessage header

Traffic and Travel Information (TTI) - TTI messagesvia cellular networks Part 3: Basic informationelements

Traffic and Travel Information (TTI) - TTI messagesvia cellular networks Part 4: Service-independentprotocols

Traffic and Travel Information (TTI) - TTI messagesvia cellular networks Part 5: Internal services

Traffic and Travel Information (TTI) - TTI messagesvia cellular networks Part 6: External services

Traffic and Travel Information (TTI) - TTI messagesvia cellular networks Part 7: Performancerequirements for onboard positioning

Traffic and Travel Information (TTI) - TTI messagesvia cellular networks Part 8: GSM-specificparameters

Public transport - Road vehicles - Visible variablepassenger information devices inside the vehicle

Road transport and traffic telematics - Electronic feecollection - Interoperability application profile forDSRC

Public transport - Service interface for real-timeinformation relating to public transport operationsPart 1: Context and framework

Public transport - Service interface for real-timeinformation relating to public transport operationsPart 2: Communications infrastructure

Public transport - Service interface for real-timeinformation relating to public transport operationsPart 3: Functional service interfaces

Rotating electrical machines Part 1: Rating andperformance

Rotating electrical machines Part 2: Methods fordetermining losses and efficiency of rotatingelectrical machinery from tests (excluding machinesfor traction vehicles)

Title

SANS 54593-2:2006/EN 14593-2:2005, IDT, Ed. 1

SANS 54594:2006/EN 14594:2005, IDT, Ed. 1

SANS 54821-1:2008/CEN/TS 14821-1:2003, IDT, Ed.1

SANS 54821-2:2008/CEN/TS 14821-2:2003, IDT, Ed.1

SANS 54821-3:2008/CEN/TS 14821-3:2003, IDT, Ed.1

SANS 54821-4:2008/CEN/TS 14821-4:2003, IDT, Ed.1

SANS 54821-5:2008/CEN/TS 14821-5:2003, IDT, Ed.1

SANS 54821-6:2008/CEN/TS 14821-6:2003, IDT, Ed.1

SANS 54821-7:2008/CEN/TS 14821-7:2003, IDT, Ed.1

SANS 54821-8:2008/CEN/TS 14821-8:2003, IDT, Ed.1

SANS 55504:2009/CEN/TS 15504:2007, IDT, Ed. 1

SANS 55509:2009/EN 15509:2007, IDT, Ed. 1

SANS 55531-1:2008/CEN/TS 15531-1:2007, IDT, Ed.1

SANS 55531-2:2008/CEN/TS 15531-2:2007, IDT, Ed.1

SANS 55531-3:2008/CEN/TS 15531-3:2007, IDT, Ed.1

SANS 60034-1:2006/IEC 60034-1:2004, IDT, Ed. 11

SANS 60034-2:1972/IEC 60034-2:1972, IDT, Ed. 3

SANS Number

(SABS IEC 60034-2)


October 2009

1

1

3

2

2.01

1

1.01

3

3.01

2

2.01

3.01

2

1

1

1

4

Edition

Rotating electrical machines Part 2-1: Standardmethods for determining losses and efficiency fromtests (excluding machines for traction vehicles)

Rotating electrical machines Part 2A: Methods fordetermining losses and efficiency of rotatingelectrical machinery from tests (excluding machinesfor traction vehicles) First supplement: Measurementof losses by the calorimetric method

Rotating electrical machines Part 3: Specificrequirements for synchronous generators driven bysteam turbines or combustion gas turbines

Rotating electrical machines Part 4: Methods fordetermining synchronous machine quantities fromtests

Rotating electrical machines Part 5: Degrees ofprotection provided by the integral design of rotatingelectrical machines (IP code) - Classification

Rotating electrical machines Part 6: Methods ofcooling (IC Code)

Rotating electrical machines Part 7: Classification oftypes of construction, mounting arrangements andterminal box position (IM Code)

Rotating electrical machines Part 8: Terminalmarkings and direction of rotation

Rotating electrical machines Part 9: Noise limits

Rotating electrical machines Part 11: Thermalprotection

Rotating electrical machines Part 12: Startingperformance of single-speed three-phase cageinduction motors

Rotating electrical machines Part 14: Mechanicalvibration of certain machines with shaft heights 56mm and higher - Measurement, evaluation and limitsof vibration severity

Rotating electrical machines Part 15: Impulsevoltage withstand levels of rotating a.c. machineswith form-wound stator coils

Rotating electrical machines Part 16: Excitationsystems for synchronous machines Chapter 1:Definitions

Rotating electrical machines Part 16: Excitationsystems for synchronous machines Chapter 2:Models for power system studies

Rotating electrical machines Part 16: Excitationsystems for synchronous machines Section 3:Dynamic performance

Rotating electrical machines Part 17: Cage inductionmotors when fed from converters - Application guide

Title

SANS 60034-2-1:2008/IEC 60034-2-1:2007, IDT, Ed.1

SANS 60034-2A:1974/IEC 60034-2A:1974, IDT, Ed.1

SANS 60034-3:2008/IEC 60034-3:2007, IDT, Ed. 6

SANS 60034-4:2009/IEC 60034-4:2008, IDT, Ed. 3

SANS 60034-5:2007/IEC 60034-5:2006, IDT, Ed. 4.1

SANS 60034-6:1991/IEC 60034-6:1991, IDT, Ed. 2

SANS 60034-7:2001/IEC 60034-7:2001, IDT, Ed. 2.1

SANS 60034-8:2007/IEC 60034-8:2007, IDT, Ed. 3

SANS 60034-9:2007/IEC 60034-9:2007, IDT, Ed. 4.1

SANS 60034-11:2005/IEC 60034-11:2004, IDT, Ed. 2

SANS 60034-12:2008/IEC 60034-12:2007, IDT, Ed.2.1

SANS 60034-14:2007/IEC 60034-14:2007, IDT, Ed.3.1

SANS 60034-15:1995/IEC 60034-15:1995, IDT, Ed. 2

SANS 60034-16-1:1991/IEC 60034-16-1:1991, IDT,Ed. 1

SANS 60034-16-2:1991/IEC 60034-16-2:1991, IDT,Ed. 1

SANS 60034-16-3:1996/IEC 60034-16-3:1996, IDT,Ed. 1

SANS 60034-17:2006/IEC TS 60034-17:2006, IDT,Ed. 4

SANS Number

(SABS IEC 60034-2A)

(SABS IEC 60034-3)

(SABS IEC 60034-4)

(SABS IEC 60034-5)

(SABS IEC 60034-6)

(SABS IEC 60034-7)

(SABS IEC 60034-8)

(SABS IEC 60034-9)

(SABS IEC 60034-11)

(SABS IEC 60034-12)

(SABS IEC 60034-14)

(SABS IEC 60034-15)

(SABS IEC 60034-16-1)

(SABS IEC 60034-16-2)

(SABS IEC 60034-16-3)

(SABS IEC 60034-17)


October 2009

1

1

2

1

1

1

1

1

1

1

1

1

2

2

Edition

Rotating electrical machines Part 18: Functionalevaluation of insulation systems Section 1: Generalguidelines

Rotating electrical machines Part 18: Functionalevaluation of insulation systems Section 21: Testprocedures for wire-wound windings - Thermalevaluation and classification

Rotating electrical machines Part 18-22: Functionalevaluation of insulation systems - Test proceduresfor wire-wound windings - Classification of changesand insulation component substitutions

Rotating electrical machines Part 18: Functionalevaluation of insulation systems Section 31: Testprocedures for form-wound windings - Thermalevaluation and classification of insulation systemsused in machines up to and including 50 MVA and15 kV

Rotating electrical machines Part 18: Functionalevaluation of insulation systems Section 32: Testprocedures for form-wound windings - Electricalevaluation of insulation systems used in machinesup to and including 50 MVA and 15 kV

Rotating electrical machines Part 18: Functionalevaluation of insulation systems Section 33: Testprocedures for form-wound windings - Multifactorfunctional evaluation - Endurance under combinedthermal and electrical stresses of insulation systemsused in machines up to and including 50 MVA and15 kV

Rotating electrical machines Part 18-34: Functionalevaluation of insulation systems - Test proceduresfor form-wound windings - Evaluation ofthermomechanical endurance of insulation systems

Rotating electrical machines Part 18-41:Qualification and type tests for Type I electricalinsulation systems used in rotating electricalmachines fed from voltage converters

Rotating electrical machines Part 18-42:Qualification and acceptance tests for partialdischarge resistant electrical insulation systems(Type II) used in rotating electrical machines fedfrom voltage converters

Rotating electrical machines Part 19: Specific testmethods for d.c. machines on conventional andrectifier-fed supplies

Rotating electrical machines Part 22: AC generatorsfor reciprocating internal combustion (RIC) enginedriven generating sets

Rotating electrical machines Part 23: Specificationfor the refurbishing of rotating electrical machines

Rotating electrical machines Part 25: Guide for thedesign and performance of a.c motors specificallydesigned for converter supply

Rotating electrical machines Part 26: Effects ofunbalanced voltages on the performance of three-phase cage induction motors

Title

SANS 60034-18-1:1992/IEC 60034-18-1:1992, IDT,Ed. 1

SANS 60034-18-21:1992/IEC 60034-18-21:1992,IDT, Ed. 1

SANS 60034-18-22:2000/IEC 60034-18-22:2000,IDT, Ed. 2

SANS 60034-18-31:1992/IEC 60034-18-31:1992,IDT, Ed. 1

SANS 60034-18-32:1995/IEC 60034-18-32:1995,IDT, Ed. 1

SANS 60034-18-33:1995/IEC 60034-18-33:1995,IDT, Ed. 1

SANS 60034-18-34:2006/IEC 60034-18-34:2000,IDT, Ed. 1

SANS 60034-18-41:2009/IEC/TS 60034-18-41:2006,IDT, Ed. 1

SANS 60034-18-42:2009/IEC/TS 60034-18-42:2008,IDT, Ed. 1

SANS 60034-19:1995/IEC 60034-19:1995, IDT, Ed. 1

SANS 60034-22:1996/IEC 60034-22:1996, IDT, Ed. 1

SANS 60034-23:2003/IEC TS 60034-23:2003, IDT,Ed. 1

SANS 60034-25:2007/IEC TS 60034-25:2007, IDT,Ed. 2

SANS 60034-26:2006/IEC 60034-26:2006, IDT, Ed. 1

SANS Number

(SABS IEC 60034-18-1)

(SABS IEC 60034-18-21)

(SABS IEC 60034-18-22)

(SABS IEC 60034-18-31)

(SABS IEC 60034-18-32)

(SABS IEC 60034-18-33)

(SABS IEC 60034-19)

(SABS IEC 60034-22)


October 2009

1

1

1

1

1.02

1.02

1

1

1

1

1

1

1

1

1

1.04

3.01

1

1

Edition

Rotating electrical machines Part 27: Off-line partialdischarge measurements on the stator windinginsulation of rotating electrical machines

Rotating electrical machines Part 28: Test methodsfor determining quantities of equivalent circuitdiagrams for three-phase low-voltage cage inductionmotors

Rotating electrical machines Part 29: Equivalentloading and superposition techniques - Indirecttesting to determine temperature rise

Rotating electrical machines Part 30: Efficiencyclasses of single-speed, three-phase, cage-induction motors (IE-code)

Instrument transformers Part 1: Current transformers

Instrument transformers Part 2: Inductive voltagetransformers

Instrument transformers Part 3: Combinedtransformers

Instrument transformers Part 5: Capacitor voltagetransformers

Instrument transformers Part 6: Requirements forprotective current transformers for transientperformance

Instrument transformers Part 7: Electronic voltagetransformers

Instrument transformers Part 8: Electronic currenttransformers

International electrotechnical vocabulary Chapter441: Switchgear, controlgear and fuses

High-voltage test techniques Part 1: Generaldefinitions and test requirements

High-voltage test techniques Part 2: Measuringsystems

High-voltage test techniques Part 3: Definitions andrequirements for on-site testing

Tungsten filament lamps for domestic and similargeneral lighting purposes - Performancerequirements

Audio, video and similar electronic apparatus -Safety requirements

Dimensions and output series for rotating electricalmachines Part 1: Frame numbers 56 to 400 andflange numbers 55 to 1080

Dimensions and output series for rotating electricalmachines Part 2: Frame numbers 355 to 1000 andflange numbers 1180 to 2360

Title

SANS 60034-27:2007/IEC TS 60034-27:2006, IDT,Ed. 1

SANS 60034-28:2007/IEC 60034-28:2007, IDT, Ed. 1

SANS 60034-29:2008/IEC 60034-29:2008, IDT, Ed. 1

SANS 60034-30:2009/IEC 60034-30:2008, IDT, Ed. 1

SANS 60044-1:2003/IEC 60044-1:2003, IDT, Ed. 1.2

SANS 60044-2:2003/IEC 60044-2:2003, IDT, Ed. 1.2

SANS 60044-3:2004/IEC 60044-3:2002, IDT, Ed. 2

SANS 60044-5:2005/IEC 60044-5:2004, IDT, Ed. 1

SANS 60044-6:2004/IEC 60044-6:1992, IDT, Ed. 1

SANS 60044-7:1999/IEC 60044-7:1999, IDT, Ed. 1

SANS 60044-8:2004/IEC 60044-8:2002, IDT, Ed. 1

SANS 60050-441:1984/IEC 60050441:1984, IDT, Ed.2

SANS 60060-1:1989/IEC 60060-1:1989, IDT, Ed. 2

SANS 60060-2:1994/IEC 60060-2:1994, IDT, Ed. 2

SANS 60060-3:2006/IEC 60060-3:2006, IDT, Ed. 1

SANS 60064:2007/IEC 60064:2007, IDT, Ed. 6.4

SANS 60065:2008/IEC 60065:2005, IDT, Ed. 7.1

SANS 60072-1:1991/IEC 60072-1:1991, IDT, Ed. 6

SANS 60072-2:1990/IEC 60072-2:1990, IDT, Ed. 1

SANS Number

(SABS IEC 60044-1)

(SABS IEC 60044-2)

(SABS IEC 60044-7)

(SABS IEC 60050-441)

(SABS IEC 60060-1)

(SABS IEC 60060-2)

(SABS IEC 60065)

(SABS IEC 60072-1)

(SABS IEC 60072-2)


October 2009

1

1.01

1

2

1

3

1

1

1

1

1

1

1

1

2

1

4

3

1

3

Edition

Dimensions and output series for rotating electricalmachines Part 3: Small built-in motors - Flangenumbers BF10 to BF50

Power transformers Part 1: General

Power transformers Part 2: Temperature rise

Power transformers Part 3: Insulation levels,dielectric tests and external clearances in air

Power transformers Part 4: Guide to the lightningimpulse and switching impulse testing - Powertransformers and reactors

Power transformers Part 5: Ability to withstand shortcircuit

Power transformers Part 6: Reactors

Power transformers Part 7: Loading guide for oil-immersed power transformers

Power transformers - Application guide

Power transformers Part 10: Determination of soundlevels

Power transformers Part 10-1: Determination ofsound levels - Application guide

Power transformers Part 11: Dry-type transformers

Power transformers Part 12: Loading guide for dry-type power transformers

Power transformers Part 13: Self-protected liquid-filled transformers

Power transformers Part 14: Design and applicationof liquid-immersed power transformers using high-temperature insulation materials

Power transformers Part 15: Gas-filled powertransformers

Explosive atmospheres Part 0: Equipment - Generalrequirements

Electrical apparatus for explosive gas atmospheresPart 1: Flameproof enclosures "d"

Electrical apparatus for explosive gas atmospheresPart 1: Flameproof enclosures "d" - Method of testfor ascertainment of maximum experimental safegap

Explosive atmospheres Part 2: Equipment protectionby pressurized enclosures <<p>>

Title

SANS 60072-3:1994/IEC 60072-3:1994, IDT, Ed. 1

SANS 60076-1:2008/IEC 60076-1:2000, IDT, Ed. 2.1

SANS 60076-2:1993/IEC 60076-2:1993, IDT, Ed. 2

SANS 60076-3:2000/IEC 60076-3:2000, IDT, Ed. 2

SANS 60076-4:2004/IEC 60076-4:2002, IDT, Ed. 1

SANS 60076-5:2006/IEC 60076-5:2006, IDT, Ed. 3

SANS 60076-6:2008/IEC 60076-6:2007, IDT, Ed. 1

SANS 60076-7:2006/IEC 60076-7:2005, IDT, Ed. 1

SANS 60076-8:1997/IEC 60076-8:1997, IDT, Ed. 1

SANS 60076-10:2001/IEC 60076-10:2001, IDT, Ed. 1

SANS 60076-10-1:2008/IEC 60076-10-1:2005, IDT,Ed. 1

SANS 60076-11:2005/IEC 60076-11:2004, IDT, Ed. 1

SANS 60076-12:2009/IEC 60076-12:2008, IDT, Ed. 1

SANS 60076-13:2006/IEC 60076-13:2006, IDT, Ed. 1

SANS 60076-14:2009/IEC/TS 60076-14:2009, IDT,Ed. 2

SANS 60076-15:2008/IEC 60076-15:2008, IDT, Ed. 1

SANS 60079-0:2009/IEC 60079-0:2007, IDT, Ed. 5

SANS 60079-1:2004/IEC 60079-1:2003, IDT, Ed. 5

SANS 60079-1-1:2004/IEC 60079-1-1:2002, IDT, Ed.1

SANS 60079-2:2007/IEC 60079-2:2007, IDT, Ed. 5

SANS Number

(SABS IEC 60072-3)

(SABS IEC 60076-1)

(SABS IEC 60076-2)

(SABS IEC 60076-3)

(SABS IEC 60076-5)

(SABS IEC 60076-8)

(SABS IEC 60076-10)

(SABS IEC 60079-0)

(SABS IEC 60079-1)

(SABS IEC 60079-2)


October 2009

1

3

3

3

3

3

1

1

4

3

1

4

3

2

1

1

2

2

1

Edition

Electrical apparatus for explosive gas atmospheresPart 4: Method of test for ignition temperature

Explosive atmospheres Part 5: Equipment protectionby powder filling "q"

Explosive atmospheres Part 6: Equipment protectionby oil-immersion "o"

Explosive atmospheres Part 7: Equipment protectionby increased safety "e"

Electrical apparatus for explosive gas atmospheresPart 10: Classification of hazardous areas

Explosive atmospheres Part 11: Equipmentprotection by intrinsic safety "i"

Electrical apparatus for explosive gas atmospheresPart 12: Classification of mixtures of gases orvapours with air according to their maximumexperimental safe gaps and minimum ignitingcurrents

Electrical apparatus for explosive gas atmospheresPart 13: Construction and use of rooms or buildingsprotected by pressurization

Explosive atmospheres Part 14: Electricalinstallations design, selection and erection

Electrical apparatus for explosive gas atmospheresPart 15: Construction, test and marking of type ofprotection "n" electrical apparatus

Electrical apparatus for explosive gas atmospheresPart 16: Artificial ventilation for the protection ofanalyzer(s) houses

Explosive atmospheres Part 17: Electricalinstallations inspection and maintenance

Explosive atmospheres Part 18: Equipmentprotection by encapsulation "m"

Explosive atmospheres Part 19: Equipment repair,overhaul and reclamation

Electrical apparatus for explosive gas atmospheresPart 20: Data for flammable gases and vapoursrelating to the use of electrical apparatus

Electrical apparatus for explosive gas atmospheresPart 25: Intrinsically safe systems

Explosive atmospheres Part 26: Equipment withequipment protection level (EPL) Ga

Explosive atmospheres Part 27: Fieldbus intrinsicallysafe concept (FISCO)

Explosive atmospheres Part 28: Protection ofequipment and transmission systems using opticalradiation

Title

SANS 60079-4:1975/IEC 60079-4:1975, IDT, Ed. 2

SANS 60079-5:2009/IEC 60079-5:2007, IDT, Ed. 3

SANS 60079-6:2009/IEC 60079-6:2007, IDT, Ed. 3

SANS 60079-7:2007/IEC 60079-7:2006, IDT, Ed. 4

SANS 60079-10:2005/IEC 60079-10:2002, IDT, Ed. 4

SANS 60079-11:2007/IEC 60079-11:2006, IDT, Ed. 5

SANS 60079-12:1978/IEC 60079-12:1978, IDT, Ed. 1

SANS 60079-13:1982/IEC 60079-13:1982, IDT, Ed. 1

SANS 60079-14:2009/IEC 60079-14:2007, IDT, Ed. 4

SANS 60079-15:2006/IEC 60079-15:2005, IDT, Ed. 3

SANS 60079-16:1990/IEC 60079-16:1990, IDT, Ed. 1

SANS 60079-17:2009/IEC 60079-17:2007, IDT, Ed. 4

SANS 60079-18:2009/IEC 60079-18:2009, IDT, Ed. 3

SANS 60079-19:2007/IEC 60079-19:2006, IDT, Ed. 2

SANS 60079-20:1996/IEC 60079-20:1996, IDT, Ed. 1

SANS 60079-25:2003/IEC 60079-25:2003, IDT, Ed. 1

SANS 60079-26:2007/IEC 60079-26:2006, IDT, Ed. 2

SANS 60079-27:2009/IEC 60079-27:2008, IDT, Ed. 2

SANS 60079-28:2009/IEC 60079-28:2006, IDT, Ed. 1

SANS Number

(SABS IEC 60079-4)

(SABS IEC 60079-5)

(SABS IEC 60079-6)

(SABS IEC 60079-7)

(SABS IEC 60079-10)

(SABS IEC 60079-11)

(SABS IEC 60079-12)

(SABS IEC 60079-13)

(SABS IEC 60079-14)

(SABS IEC 60079-15)

(SABS IEC 60079-16)

(SABS IEC 60079-17)

(SABS IEC 60079-18)

(SABS IEC 60079-19)

(SABS IEC 60079-20)


October 2009

1

1

1

2.03

4

5

2

3

2

3

1

2

1.01

2.02

1.01

1

1

1

1

Edition

Explosive atmospheres Part 30-1: Electricalresistance trace heating - General and testingrequirements

Explosive atmospheres Part 30-2: Electricalresistance trace heating - Application guide fordesign, installation and maintenance

Explosive atmospheres Part 31: Equipment dustignition protection by enclosure "t"

Double-capped fluorescent lamps - Performancespecifications

Primary batteries Part 1: General

Primary batteries Part 2: Physical and electricalspecifications

Primary batteries Part 3: Watch batteries

Primary batteries Part 4: Safety of lithium batteries

Primary batteries Part 5: Safety of batteries withaqueous electrolyte

Lead-acid starter batteries Part 1: Generalrequirements and methods of test

Lead-acid starter batteries Part 2: Dimensions ofbatteries and dimensions and marking of terminals

Lead-acid starter batteries Part 4: Dimensions ofbatteries for heavy vehicles

Surge arresters Part 1: Non-linear resistor typegapped surge arresters for a.c systems

Surge arresters Part 4: Metal-oxide surge arresterswithout gaps for a.c. systems

Surge arresters Part 5: Selection and applicationrecommendations

Surge arresters Part 6: Surge arresters containingboth series and parallel gapped structures - Rated52 kV and less

Surge arresters Part 7: Glossary of terms anddefinitions from IEC publications 60099-1, 60099-4,60099-6, 61643-1, 61643-12, 61643-21, 61643-311,61643-321, 61643-331 and 61643-341

Methods of measurement on receivers for televisionbroadcast transmissions Part 1: Generalconsiderations - Measurements at radio and videofrequencies

Methods of measurement on receivers for televisionbroadcast transmissions Part 2: Audio channels -General methods and methods for monophonicchannels

Title

SANS 60079-30-1:2007/IEC 60079-30-1:2007, IDT,Ed. 1

SANS 60079-30-2:2007/IEC 60079-30-2:2007, IDT,Ed. 1

SANS 60079-31:2009/IEC 60079-31:2008, IDT, Ed. 1

SANS 60081:2006/IEC 60081:2005, IDT, Ed. 5.3

SANS 60086-1:2007/IEC 60086-1:2006, IDT, Ed. 10

SANS 60086-2:2007/IEC 60086-2:2006, IDT, Ed. 11

SANS 60086-3:2005/IEC 60086-3:2004, IDT, Ed. 2

SANS 60086-4:2008/IEC 60086-4:2007, IDT, Ed. 3

SANS 60086-5:2005/IEC 60086-5:2005, IDT, Ed. 2

SANS 60095-1:2007/IEC 60095-1:2006, IDT, Ed. 7

SANS 60095-2:1984/IEC 60095-2:1984, IDT, Ed. 3

SANS 60095-4:2008/IEC 60095-4:2008, IDT, Ed. 2

SANS 60099-1:1999/IEC 60099-1:1999, IDT, Ed. 3.1

SANS 60099-4:2009/IEC 60099-4:2009, IDT, Ed. 2.2

SANS 60099-5:2007/IEC 60099-5:2000, IDT, Ed. 1.1

SANS 60099-6:2005/IEC 60099-6:2002, IDT, Ed. 1

SANS 60099-7:2005/IEC/PAS 60099-7:2004, IDT,Ed. 1

SANS 60107-1:1997/IEC 60107-1:1997, IDT, Ed. 3

SANS 60107-2:1997/IEC 60107-2:1997, IDT, Ed. 2

SANS Number

(SABS IEC 60081)

(SABS IEC 60086-1)

(SABS IEC 60086-2)

(SABS IEC/ISO 60086-3)

(SABS IEC 60086-4)

(SABS IEC 60086-5)

(SABS IEC 60095-1)

(SABS IEC 60095-2)

(SABS IEC 60095-4)

(SABS IEC 60099-1)

(SABS IEC 60099-4)

(SABS IEC 60099-5)

(SABS IEC 60107-1)

(SABS IEC 60107-2)


October 2009

1.01

1

1

2

1

1

1

2

1

1

1.02

1

2

3.01

1

1

1

1.02

Edition

Recommended methods of measurements onreceivers for television broadcast transmissions Part5: Electrical measurements on multichannel soundtelevision receivers using the NICAM two-channeldigital sound-system

Dimensions of ball and socket couplings of stringinsulator units

Dimensions of brushes and brush-holders forelectrical machinery

Insulated bushings for alternating voltages above 1000 V

Semiconductor convertors - General requirementsand line commutated convertors Part 1-1:Specification of basic requirements

Semiconductor convertors - General requirementsand line commutated convertors Part 1-2:Application guide

Semiconductor convertors - General requirementsand line commutated convertors Part 1-3:Transformers and reactors

Semiconductor converters Part 2: Self-commutatedsemiconductor converters including direct d.c.converters

Semiconductor convertors Part 6: Application guidefor the protection of semiconductor convertorsagainst overcurrent by fuses

Glow-starters for fluorescent lamps

Tests on indoor and outdoor post insulators ofceramic material or glass for systems with nominalvoltages greater than 1 000 V

High-pressure mercury vapour lamps - Performancespecifications

Low-pressure sodium vapour lamps - Performancespecifications

Safety of machinery - Electrical equipment ofmachines Part 1: General requirements

Safety of machinery - Electrical equipment ofmachines Part 11: Requirements for HV equipmentfor voltages above 1 000 V a.c or 1 500 V d.c andnot exceeding 36 kV

Safety of machinery - Electrical equipment ofmachines Part 32: Requirements for hoistingmachines

Maximum demand indicators, Class l.0

Polyvinyl chloride insulated cables of rated voltagesup to and including 450/750 V Part 1: Generalrequirements

Title

SANS 60107-5:1999/IEC 60107-5:1999, IDT, Ed. 1.1

SANS 60120:1984/IEC 60120:1984, IDT, Ed. 3

SANS 60136:1986/IEC 60136:1986, IDT, Ed. 2

SANS 60137:2004/IEC 60137:2003, IDT, Ed. 5

SANS 60146-1-1:1991/IEC 60146-1-1:1991, IDT, Ed.3

SANS 60146-1-2:1991/IEC 60146-1-2:1991, IDT, Ed.3

SANS 60146-1-3:1991/IEC 60146-1-3:1991, IDT, Ed.3

SANS 60146-2:1999/IEC 60146-2:1999, IDT, Ed. 2

SANS 60146-6:1992/IEC 60146-6:1992, IDT, Ed. 1

SANS 60155:2007/IEC 60155:1993, IDT, Ed. 4

SANS 60168:2001/IEC 60168:2001, IDT, Ed. 4.2

SANS 60188:2001/IEC 60188:2001, IDT, Ed. 3

SANS 60192:2001/IEC 60192:2001, IDT, Ed. 3

SANS 60204-1:2009/IEC 60204-1:2009, IDT, Ed. 5.1

SANS 60204-11:2000/IEC 60204-11:2000, IDT, Ed. 1

SANS 60204-32:2009/IEC 60204-32:2008, IDT, Ed. 2

SANS 60211:1966/IEC 60211:1966, IDT, Ed. 1

SANS 60227-1:2006/IEC 60227-1:1998, IDT, Ed. 2.2

SANS Number

(SABS IEC 60107-5)

(SABS IEC 60120)

(SABS IEC 60136)

(SABS IEC 60137)

(SABS IEC 60146-1-1)

(SABS IEC 60146-1-2)

(SABS IEC 60146-1-3)

(SABS IEC 60146-2)

(SABS IEC 60146-6)

(SABS IEC 60168)

(SABS IEC 60188)

(SABS IEC 60192)

(SABS IEC 60204-1)

(SABS IEC 60204-11)

(SABS IEC 60211)


October 2009

1.01

1.02

4.01

1

1

3

2

1

3

2

2

3

1

1

3

2

2

3.01

3.01

Edition

Polyvinyl chloride insulated cables of rated voltagesup to and including 450/750 V Part 2: Test methods

Polyvinyl chloride insulated cables of rated voltagesup to and including 450/750 V Part 5: Flexiblecables (cords)

Edison screw lampholders

AC motor capacitors Part 1: General - Performance,testing and rating - Safety requirements - Guide forinstallation and operation

AC motor capacitors Part 2: Motor start capacitors

Lead-acid traction batteries Part 2: Dimensions ofcells and terminals and marking of polarity on cells

High-voltage switches Part 1: Switches for ratedvoltages above 1 kV and less than 52 kV

High-voltage switches Part 2: High-voltage switchesfor rated voltages of 52 kV and above

Low-voltage fuses Part 1: General requirements

Low-voltage fuses Part 2: Supplementaryrequirements for fuses for use by authorizedpersons (fuses mainly for industrial application) -Examples of standardized systems of fuses A to I

Low-voltage fuses Part 3: Supplementaryrequirements for fuses for use by unskilled persons(fuses mainly for household and similar applications)- Examples of standardized systems of fuses A to F

Low-voltage fuses Part 4: Supplementaryrequirements for fuse-links for the protection ofsemiconductor devices

High-voltage test techniques - Partial dischargemeasurements

Characteristics of indoor and outdoor post insulatorsfor systems with nominal voltages greater than 1000 V

High-voltage fuses Part 1: Current-limiting fuses

High-voltage fuses Part 2: Expulsion fuses

Insulators for overhead lines with a nominal voltageabove 1 000 V - Ceramic or glass insulator units fora.c. systems - Characteristics of insulator units ofthe cap and pin type

Plugs, socket-outlets and couplers for industrialpurposes Part 1: General requirements

Plugs, socket-outlets and couplers for industrialpurposes Part 2: Dimensional interchangeabilityrequirements for pin and contact-tube accessories

Title

SANS 60227-2:2006/IEC 60227-2:2003, IDT, Ed. 2.1

SANS 60227-5:2006/IEC 60227-5:2003, IDT, Ed. 2.2

SANS 60238:2009/IEC 60238:2008, IDT, Ed. 8.1

SANS 60252-1:2001/IEC 60252-1:2001, IDT, Ed. 1

SANS 60252-2:2004/IEC 60252-2:2003, IDT, Ed. 1

SANS 60254-2:2008/IEC 60254-2:2008, IDT, Ed. 4

SANS 60265-1:1998/IEC 60265-1:1998, IDT, Ed. 3

SANS 60265-2:1988/IEC 60265-2:1988, IDT, Ed. 1

SANS 60269-1:2007/IEC 60269-1:2006, IDT, Ed. 4

SANS 60269-2:2007/IEC 60269-2:2006, IDT, Ed. 3

SANS 60269-3:2007/IEC 60269-3:2006, IDT, Ed. 3

SANS 60269-4:2009/IEC 60269-4:2009, IDT, Ed. 5

SANS 60270:2000/IEC 60270:2000, IDT, Ed. 3

SANS 60273:1990/IEC 60273:1990, IDT, Ed. 3

SANS 60282-1:2006/IEC 60282-1:2005, IDT, Ed. 6

SANS 60282-2:2008/IEC 60282-2:2008, IDT, Ed. 3

SANS 60305:1995/IEC 60305:1995, IDT, Ed. 4

SANS 60309-1:2006/IEC 60309-1:2005, IDT, Ed. 4.1

SANS 60309-2:2006/IEC 60309-2:2005, IDT, Ed. 4.1

SANS Number

(SABS IEC 60238)

(SABS IEC 60252-1)

(SABS IEC 60254-2)

(SABS IEC 60265-1)

(SABS IEC 60265-2)

(SABS IEC 60269-1)

(SABS IEC 60269-2)

(SABS IEC 60269-3)

(SABS IEC 60269-4)

(SABS IEC 60270)

(SABS IEC 60273)

(SABS IEC 60282-1)

(SABS IEC 60282-2)

(SABS IEC 60305)

(SABS IEC 60309-1)

(SABS IEC 60309-2)


October 2009

1

3

2.02

1.02

1

1.02

1.02

1

1.02

1

3.01

1

1.01

1

1

1

Edition

Plugs, socket-outlets and couplers for industrialpurposes Part 4: Switched socket-outlets andconnectors with or without interlock

Electric irons for household or similar use - Methodsfor measuring performance

Specifications for particular types of winding wiresPart 0-1: General requirements - Enamelled roundcopper wire

Specifications for particular types of winding wiresPart 0-2: General requirements - Enamelledrectangular copper wire

Specifications for particular types of winding wiresPart 0-3: General requirements - Enamelled roundaluminium wire

Specifications for particular types of winding wiresPart 4: Solderable polyurethane enamelled roundcopper wires, class 130

Specifications for particular types of winding wiresPart 8: Polyesterimide enamelled round copper wire,class 180

Specifications for particular types of winding wiresPart 12: Polyvinyl acetal enamelled round copperwire, class 120

Specifications for particular types of winding wiresPart 13: Polyester or polyesterimide overcoated withpolyamide-imide enamelled round copper wire, class200

Specifications for particular types of winding wiresPart 100: Enamelled round copper wire, class 220

Appliance couplers for household and similargeneral purposes Part 1: General requirements

Appliance couplers for household and similargeneral purposes Part 2-1: Sewing machinecouplers

Appliance couplers for household and similargeneral purposes Part 2-3: Appliance couplers witha degree of protection higher than IPX0

Tests for electric cables under fire conditions -Circuit integrity Part 1: Test method for fire withshock at a temperature of at least 830 °C for cablesof rated voltage up to and including 0,6/1,0 kV andwith an overall diameter exceeding 20 mm

Tests for electric cables under fire conditions -Circuit integrity Part 2: Test method for fire withshock at a temperature of at least 830 °C for cablesof rated voltage up to and including 0,6/1,0 kV andwith an overall diameter not exceeding 20 mm

Tests for electric cables under fire conditions -Circuit integrity Part 3: Test method for fire withshock at a temperature of at least 830 °C for cablesof rated voltage up to and including 0,6/1,0 kVtested in a metal enclosure

Title

SANS 60309-4:2006/IEC 60309-4:2006, IDT, Ed. 1

SANS 60311:2003/IEC 60311:2002, IDT, Ed. 4

SANS 60317-0-1:2006/IEC 60317-0-1:2005, IDT, Ed.2.2

SANS 60317-0-2:2009/IEC 60317-0-2:2005, IDT, Ed.2.2

SANS 60317-0-3:2008/IEC 60317-0-3:2008, IDT, Ed.3

SANS 60317-4:2007/IEC 60317-4:2000, IDT, Ed. 3.2

SANS 60317-8:2007/IEC 60317-8:1997, IDT, Ed. 3.2

SANS 60317-12:1990/IEC 60317-12:1990, IDT, Ed. 2

SANS 60317-13:1997/IEC 60317-13:1997, IDT, Ed.2.2

SANS 60317-100:2003/IEC 60317-7:1997, MOD, Ed.3.2

SANS 60320-1:2008/IEC 60320-1:2007, IDT, Ed. 2.1

SANS 60320-2-1:2000/IEC 60320-2-1:2000, IDT, Ed.2

SANS 60320-2-3:2005/IEC 60320-2-3:2005, IDT, Ed.1.1

SANS 60331-1:2009/IEC 60331-1:2009, IDT, Ed. 1

SANS 60331-2:2009/IEC 60331-2:2009, IDT, Ed. 1

SANS 60331-3:2009/IEC 60331-3:2009, IDT, Ed. 1

SANS Number

(SABS IEC 60311)

(SABS IEC 60317-0-1)

(SABS IEC 60317-4)

(SABS IEC 60317-8)

(SABS IEC 60317-12)

(SABS IEC 60317-13)

(SABS IEC 60320-1)

(SABS IEC 60320-2-1)

(SABS IEC 60320-2-3)


October 2009

1.01

1

1

1

1

1

1

1

1

1

1

1.01

1

1.01

1.01

Edition

Tests for electric cables under fire conditions -Circuit integrity Part 11: Apparatus - Fire alone at aflame temperature of at least 750 °C

Tests for electric cables under fire conditions -Circuit integrity Part 12: Apparatus - Fire with shockat a temperature of at least 830 degrees C

Tests for electric cables under fire conditions -Circuit integrity Part 21: Procedures andrequirements - Cables of rated voltage up to andincluding 0,6/1,0 kV

Tests for electric cables under fire conditions -Circuit integrity Part 23: Procedures andrequirements - Electric data cables

Tests for electric cables under fire conditions -Circuit integrity Part 25: Procedures andrequirements - Optical fibre cables

Test for electric cables under fire conditions - Circuitintegrity Part 31: Procedures and requirements forfire with shock - Cables of rated voltage up to andincluding 0,6/1 kV

Tests on electric and optical fibre cables under fireconditions Part 1-1: Test for vertical flamepropagation for a single insulated wire or cable -Apparatus

Tests on electric and optical fibre cables under fireconditions Part 1-2: Test for vertical flamepropagation for a single insulated wire or cable -Procedure for 1 kW pre-mixed flame

Tests on electric and optical fibre cables under fireconditions Part 1-3: Test for vertical flamepropagation for a single insulated wire or cable -Procedure for determination of flamingdroplets/particles

Tests on electric and optical fibre cables under fireconditions Part 2-1: Test for vertical flamepropagation for a single small insulated wire or cable- Apparatus

Tests on electric and optical fibre cables under fireconditions Part 2-2: Test for vertical flamepropagation for a single small insulated wire or cable- Procedure for diffusion flame

Tests on electric and optical fibre cables under fireconditions Part 3-10: Test for vertical flame spreadof vertically-mounted bunched wires or cables -Apparatus

Tests on electric cables under fire conditions Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R

Tests on electric and optical fibre cables under fireconditions Part 3-22: Test for vertical flame spreadof vertically-mounted bunched wires or cables -Category A

Tests on electric and optical fibre cables under fireconditions Part 3-23: Test for vertical flame spreadof vertically-mounted bunched wires or cables -Category B

Title

SANS 60331-11:2009/IEC 60331-11:2009, IDT, Ed.1.1

SANS 60331-12:2003/IEC 60331-12:2002, IDT, Ed. 1

SANS 60331-21:1999/IEC 60331-21:1999, IDT, Ed. 1

SANS 60331-23:1999/IEC 60331-23:1999, IDT, Ed. 1

SANS 60331-25:1999/IEC 60331-25:1999, IDT, Ed. 1

SANS 60331-31:2003/IEC 60331-31:2002, IDT, Ed. 1

SANS 60332-1-1:2005/IEC 60332-1-1:2004, IDT, Ed.1

SANS 60332-1-2:2005/IEC 60332-1-2:2004, IDT, Ed.1

SANS 60332-1-3:2005/IEC 60332-1-3:2004, IDT, Ed.1

SANS 60332-2-1:2005/IEC 60332-2-1:2004, IDT, Ed.1

SANS 60332-2-2:2005/IEC 60332-2-2:2004, IDT, Ed.1

SANS 60332-3-10:2009/IEC 60332-3-10:2009, IDT,Ed. 1.1

SANS 60332-3-21:2000/IEC 60332-3-21:2000, IDT,Ed. 1

SANS 60332-3-22:2009/IEC 60332-3-22:2009, IDT,Ed. 1.1

SANS 60332-3-23:2009/IEC 60332-3-23:2009, IDT,Ed. 1.1

SANS Number

(SABS IEC 60331-11)

(SABS IEC 60331-21)

(SABS IEC 60331-23)

(SABS IEC 60331-25)

(SABS IEC 60332-3-10)

(SABS IEC 60332-3-21)

(SABS IEC 60332-3-22)

(SABS IEC 60332-3-23)


October 2009

1.01

1.01

2.02

3.01

3.01

3

2.02

3.02

5

2.01

3.01

2.01

3.01

2

2.01

2.02

4.01

Edition

Tests on electric and optical fibre cables under fireconditions Part 3-24: Test for vertical flame spreadof vertically-mounted bunched wires or cables -Category C

Tests on electric and optical fibre cables under fireconditions Part 3-25: Test for vertical flame spreadof vertically-mounted bunched wires or cables -Category D

Household and similar electrical appliances - SafetyPart 1: General requirements

Household and similar electrical appliances - SafetyPart 2-2: Particular requirements for vacuumcleaners and water-suction cleaning appliances

Household and similar electrical appliances - SafetyPart 2-3: Particular requirements for electric irons

Household and similar electrical appliances - SafetyPart 2-4: Particular requirements for spin extractors

Household and similar electrical appliances - SafetyPart 2-5: Particular requirements for dishwashers

Household and similar electrical appliances - SafetyPart 2-6: Particular requirements for stationarycooking ranges, hobs, ovens and similar appliances

Household and similar electrical appliances - SafetyPart 2-7: Particular requirements for washingmachines

Household and similar electrical appliances - SafetyPart 2-8: Particular requirements for shavers, hairclippers and similar appliances

Household and similar electrical appliances - SafetyPart 2-9: Particular requirements for grills, toastersand similar portable cooking appliances

Household and similar electrical appliances - SafetyPart 2-10: Particular requirements for floor treatmentmachines and wet scrubbing machines

Household and similar electrical appliances - SafetyPart 2-11: Particular requirements for tumble dryers

Household and similar electrical appliances - SafetyPart 2-12: Particular requirements for warmingplates and similar appliances

Household and similar electrical appliances - SafetyPart 2-12: Particular requirements for warmingplates and similar appliances

Household and similar electrical appliances - SafetyPart 2-13: Particular requirements for deep fatfryers, frying pans and similar appliances

Household and similar electrical appliances - SafetyPart 2-14: Particular requirements for kitchenmachines

Title

SANS 60332-3-24:2009/IEC 60332-3-24:2009, IDT,Ed. 1.1

SANS 60332-3-25:2009/IEC 60332-3-25:2009, IDT,Ed. 1.1

SANS 60335-1:2007/IEC 60335-1:2006, IDT, Ed. 4.2

SANS 60335-2-2:2005/IEC 60335-2-2:2004, IDT, Ed.5.1

SANS 60335-2-3:2006/IEC 60335-2-3:2005, IDT, Ed.5.1

SANS 60335-2-4:2009/IEC 60335-2-4:2008, IDT, Ed.6

SANS 60335-2-5:2009/IEC 60335-2-5:2008, IDT, Ed.5.2

SANS 60335-2-6:2008/IEC 60335-2-6:2008, IDT, Ed.5.2

SANS 60335-2-7:2009/IEC 60335-2-7:2008, IDT, Ed.7

SANS 60335-2-8:2009/IEC 60335-2-8:2005, IDT, Ed.5.1

SANS 60335-2-9:2004/IEC 60335-2-9:2004, IDT, Ed.5.1

SANS 60335-2-10:2009/IEC 60335-2-10:2008, IDT,Ed. 5.1

SANS 60335-2-11:2003/IEC 60335-2-11:2003, IDT,Ed. 6.1

SANS 60335-2-12:2003/IEC 60335-2-12:2002, IDT,Ed. 5

SANS 60335-2-12:2009/IEC 60335-2-12:2008, IDT,Ed. 5.1

SANS 60335-2-13:2008/IEC 60335-2-13:2008, IDT,Ed. 5.2

SANS 60335-2-14:2009/IEC 60335-2-14:2008, IDT,Ed. 5.1

SANS Number

(SABS IEC 60332-3-24)

(SABS IEC 60332-3-25)

(SABS IEC 60335-1)

(SABS IEC 60335-2-2)

(SABS IEC 60335-2-3)

(SABS IEC 60335-2-4)

(SABS IEC 60335-2-5)

(SABS IEC 60335-2-6)

(SABS IEC 60335-2-7)

(SABS IEC 60335-2-8)

(SABS IEC 60335-2-9)

(SABS IEC 60335-2-10)

(SABS IEC 60335-2-11)

(SABS IEC 60335-2-12)

(SABS IEC 60335-2-12)

(SABS IEC 60335-2-13)

(SABS IEC 60335-2-14)


October 2009

3.01

3

2.01

1

3.01

4

3.01

3.01

3.02

3.01

3.01

3.02

3.02

3.01

4

3.01

4.01

Edition

Household and similar electrical appliances - SafetyPart 2-15: Particular requirements for appliances forheating liquids

Household and similar electrical appliances - SafetyPart 2-16: Particular requirements for food wastedisposers

Household and similar electrical appliances - SafetyPart 2-17: Particular requirements for blankets, padsand similar flexible heating appliances

Safety of household and similar electrical appliancesPart 2-21: Particular requirements for storage waterheaters

Household and similar electrical appliances - SafetyPart 2-23: Particular requirements for appliances forskin or hair care

Household and similar electrical appliances - SafetyPart 2-24: Particular requirements for refrigeratingappliances, ice-cream appliances and ice-makers

Household and similar electrical appliances - SafetyPart 2-25: Particular requirements for microwaveovens, including combination microwave ovens

Household and similar electrical appliances - SafetyPart 2-26: Particular requirements for clocks

Household and similar electrical appliances - SafetyPart 2-27: Particular requirements for appliances forskin exposure to ultraviolet and infrared radiation

Household and similar electrical appliances - SafetyPart 2-28: Particular requirements for sewingmachines

Household and similar electrical appliances - SafetyPart 2-29: Particular requirements for batterychargers

Household and similar electrical appliances - SafetyPart 2-30: Particular requirements for room heaters

Household and similar electrical appliances - SafetyPart 2-31: Particular requirements for range hoodsand other cooking fume extractors

Household and similar electrical appliances - SafetyPart 2-32: Particular requirements for massageappliances

Household and similar electrical appliances - SafetyPart 2-34: Particular requirements for motor-compressors

Household and similar electrical appliances - SafetyPart 2-35: Particular requirements for instantaneouswater heaters

Household and similar electrical appliances - SafetyPart 2-36: Particular requirements for commercialelectric cooking ranges, ovens, hobs and hobelements

Title

SANS 60335-2-15:2009/IEC 60335-2-15:2005, IDT,Ed. 5.1

SANS 60335-2-16:2003/IEC 60335-2-16:2002, IDT,Ed. 5

SANS 60335-2-17:2008/IEC 60335-2-17:2006, IDT,Ed. 2.1

SANS 60335-2-21:2000/IEC 60335-2-21:1997, MOD

SANS 60335-2-23:2008/IEC 60335-2-23:2008, IDT,Ed. 5.1

SANS 60335-2-24:2003/IEC 60335-2-24:2002, IDT,Ed. 6

SANS 60335-2-25:2006/IEC 60335-2-25:2005, IDT,Ed. 5.1

SANS 60335-2-26:2009/IEC 60335-2-26:2008, IDT,Ed. 4.1

SANS 60335-2-27:2007/IEC 60335-2-27:2007, IDT,Ed. 4.2

SANS 60335-2-28:2009/IEC 60335-2-28:2008, IDT,Ed. 4.1

SANS 60335-2-29:2005/IEC 60335-2-29:2004, IDT,Ed. 4.1

SANS 60335-2-30:2008/IEC 60335-2-30:2004, IDT,Ed. 4.2

SANS 60335-2-31:2009/IEC 60335-2-31:2009, IDT,Ed. 4.2

SANS 60335-2-32:2008/IEC 60335-2-32:2008, IDT,Ed. 4.1

SANS 60335-2-34:2004/IEC 60335-2-34:2002, IDT,Ed. 4

SANS 60335-2-35:2007/IEC 60335-2-35:2003, IDT,Ed. 4.1

SANS 60335-2-36:2006/IEC 60335-2-36:2005, IDT,Ed. 5.1

SANS Number

(SABS IEC 60335-2-15)

(SABS IEC 60335-2-16)

(SABS IEC 60335-2-17)

(SABS 60335-2-21)

(SABS IEC 60335-2-23)

(SABS IEC 60335-2-24)

(SABS IEC 60335-2-25)

(SABS IEC 60335-2-26)

(SABS IEC 60335-2-27)

(SABS IEC 60335-2-28)

(SABS IEC 60335-2-29)

(SABS IEC 60335-2-30)

(SABS IEC 60335-2-31)

(SABS IEC 60335-2-32)

(SABS IEC 60335-2-34)

(SABS IEC 60335-2-35)

(SABS IEC 60335-2-36)


October 2009

3.01

4.01

4.02

3.02

3.01

4

3.02

3.01

3

4

4.01

4.01

4.01

3.01

3.01

3.01

Edition

Household and similar electrical appliances - SafetyPart 2-37: Particular requirements for commercialelectric deep fat fryers

Household and similar electrical appliances - SafetyPart 2-38: Particular requirements for commercialelectric griddles and griddle grills

Household and similar electrical appliances - SafetyPart 2-39: Particular requirements for commercialelectric multi-purpose cooking pans

Household and similar electrical appliances - SafetyPart 2-40: Particular requirements for electrical heatpumps, air conditioners and dehumidifiers

Household and similar electrical appliances - SafetyPart 2-41: Particular requirements for pumps

Household and similar electrical appliances - SafetyPart 2-42: Particular requirements for commercialelectric forced convection ovens, steam cookers andsteam-convection ovens

Household and similar electrical appliances - SafetyPart 2-43: Particular requirements for clothes dryersand towel rails

Household and similar electrical appliances - SafetyPart 2-44: Particular requirements for ironers

Household and similar electrical appliances - SafetyPart 2-45: Particular requirements for portableheating tools and similar appliances

Household and similar electrical appliances - SafetyPart 2-47: Particular requirements for commercialelectric boiling pans

Household and similar electrical appliances - SafetyPart 2-48: Particular requirements for commercialelectric grillers and toasters

Household and similar electrical appliances - SafetyPart 2-49: Particular requirements for commercialelectric appliances for keeping food and crockerywarm

Household and similar electrical appliances - SafetyPart 2-50: Particular requirements for commercialelectric bains-marie

Household and similar electrical appliances - SafetyPart 2-51: Particular requirements for stationarycirculation pumps for heating and service waterinstallations

Household and similar electrical appliances - SafetyPart 2-52: Particular requirements for oral hygieneappliances

Household and similar electrical appliances - SafetyPart 2-53: Particular requirements for sauna heatingappliances

Title

SANS 60335-2-37:2009/IEC 60335-2-37:2008, IDT,Ed. 5.1

SANS 60335-2-38:2009/IEC 60335-2-38:2008, IDT,Ed. 5.1

SANS 60335-2-39:2009/IEC 60335-2-39:2008, IDT,Ed. 5.2

SANS 60335-2-40:2006/IEC 60335-2-40:2005, IDT,Ed. 4.2

SANS 60335-2-41:2004/IEC 60335-2-41:2004, IDT,Ed. 3.1

SANS 60335-2-42:2003/IEC 60335-2-42:2002, IDT,Ed. 5

SANS 60335-2-43:2009/IEC 60335-2-43:2008, IDT,Ed. 3.2

SANS 60335-2-44:2009/IEC 60335-2-44:2009, IDT,Ed. 3.1

SANS 60335-2-45:2003/IEC 60335-2-45:2002, IDT,Ed. 3

SANS 60335-2-47:2003/IEC 60335-2-47:2002, IDT,Ed. 4

SANS 60335-2-48:2009/IEC 60335-2-48:2008, IDT,Ed. 4.1

SANS 60335-2-49:2009/IEC 60335-2-49:2008, IDT,Ed. 4.1

SANS 60335-2-50:2008/IEC 60335-2-50:2008, IDT,Ed. 4.1

SANS 60335-2-51:2009/IEC 60335-2-51:2008, IDT,Ed. 3.1

SANS 60335-2-52:2009/IEC 60335-2-52:2008, IDT,Ed. 3.1

SANS 60335-2-53:2007/IEC 60335-2-53:2007, IDT,Ed. 3.1

SANS Number

(SABS IEC 60335-2-37)

(SABS IEC 60335-2-38)

(SABS IEC 60335-2-39)

(SABS IEC 60335-2-40)

(SABS IEC 60335-2-41)

(SABS IEC 60335-2-42)

(SABS IEC 60335-2-43)

(SABS IEC 60335-2-44)

(SABS IEC 60335-2-45)

(SABS IEC 60335-2-47)

(SABS IEC 60335-2-48)

(SABS IEC 60335-2-49)

(SABS IEC 60335-2-50)

(SABS IEC 60335-2-51)

(SABS IEC 60335-2-52)

(SABS IEC 60335-2-53)


October 2009

3

4

3.01

3.01

3.01

3

3.02

2.01

3.01

3.01

2.01

2.01

3

3.02

3.02

2.01

Edition

Household and similar electrical appliances - SafetyPart 2-53: Particular requirements for sauna heatingappliances

Household and similar electrical appliances - SafetyPart 2-54: Particular requirements for surface-cleaning appliances for household use employingliquids or steam

Household and similar electrical appliances - SafetyPart 2-55: Particular requirements for electricalappliances for use with aquariums and gardenponds

Household and similar electrical appliances - SafetyPart 2-56: Particular requirements for projectors andsimilar appliances

Household and similar electrical appliances - SafetyPart 2-58: Particular requirements for commercialelectric dishwashing machines

Household and similar electrical appliances - SafetyPart 2-59: Particular requirements for insect killers

Household and similar electrical appliances - SafetyPart 2-60: Particular requirements for whirlpoolbaths and whirlpool spas

Household and similar electrical appliances - SafetyPart 2-61: Particular requirements for thermal-storage room heaters

Household and similar electrical appliances - SafetyPart 2-62: Particular requirements for commercialelectric rinsing sinks

Household and similar electrical appliances - SafetyPart 2-64: Particular requirements for commercialelectric kitchen machines

Household and similar electrical appliances - SafetyPart 2-65: Particular requirements for air-cleaningappliances

Household and similar electrical appliances - SafetyPart 2-66: Particular requirements for water-bedheaters

Household and similar electrical appliances - SafetyPart 2-67: Particular requirements for floor treatmentand floor cleaning machines, for industrial andcommercial use

Household and similar electrical appliances - SafetyPart 2-68: Particular requirements for sprayextraction appliances, for industrial and commercialuse

Household and similar electrical appliances - SafetyPart 2-69: Particular requirements for wet and dryvacuum cleaners, including power brush, forindustrial and commercial use

Household and similar electrical appliances - SafetyPart 2-70: Particular requirements for milkingmachines

Title

SANS 60335-2-53:2003/IEC 60335-2-53:2002, IDT,Ed. 3

SANS 60335-2-54:2009/IEC 60335-2-54:2008, IDT,Ed. 4

SANS 60335-2-55:2009/IEC 60335-2-55:2008, IDT,Ed. 3.1

SANS 60335-2-56:2009/IEC 60335-2-56:2008, IDT,Ed. 3.1

SANS 60335-2-58:2009/IEC 60335-2-58:2008, IDT,Ed. 3.1

SANS 60335-2-59:2003/IEC 60335-2-59:2002, IDT,Ed. 3

SANS 60335-2-60:2009/IEC 60335-2-60:2008, IDT,Ed. 3.2

SANS 60335-2-61:2007/IEC 60335-2-61:2005, IDT,Ed. 2.1

SANS 60335-2-62:2008/IEC 60335-2-62:2008, IDT,Ed. 3.1

SANS 60335-2-64:2008/IEC 60335-2-64:2008, IDT,Ed. 3.1

SANS 60335-2-65:2009/IEC 60335-2-65:2008, IDT,Ed. 2.1

SANS 60335-2-66:2009/IEC 60335-2-66:2009, IDT,Ed. 2.1

SANS 60335-2-67:2003/IEC 60335-2-67:2002, IDT,Ed. 3

SANS 60335-2-68:2007/IEC 60335-2-68:2007, IDT,Ed. 3.2

SANS 60335-2-69:2008/IEC 60335-2-69:2008, IDT,Ed. 3.2

SANS 60335-2-70:2007/IEC 60335-2-70:2007, IDT,Ed. 2.1

SANS Number

(SABS IEC 60335-2-53)

(SABS IEC 60335-2-54)

(SABS IEC 60335-2-55)

(SABS IEC 60335-2-56)

(SABS IEC 60335-2-58)

(SABS IEC 60335-2-59)

(SABS IEC 60335-2-60)

(SABS IEC 60335-2-61)

(SABS IEC 60335-2-62)

(SABS IEC 60335-2-64)

(SABS IEC 60335-2-65)

(SABS IEC 60335-2-66)

(SABS IEC 60335-2-67)

(SABS IEC 60335-2-68)

(SABS IEC 60335-2-69)

(SABS IEC 60335-2-70)


October 2009

2.01

2

2

2

2.02

2.01

1.01

2

2.02

2.02

2.01

2.01

1.01

2.01

2.01

2

2.01

Edition

Household and similar electrical appliances - SafetyPart 2-71: Particular requirements for electricalheating appliances for breeding and rearing animals

Household and similar electrical appliances - SafetyPart 2-72: Particular requirements for automaticmachines for floor treatment for commercial andindustrial use

Household and similar electrical appliances - SafetyPart 2-73: Particular requirements for fixedimmersion heaters

Household and similar electrical appliances - SafetyPart 2-74: Particular requirements for portableimmersion heaters

Household and similar electrical appliances - SafetyPart 2-75: Particular requirements for commercialdispensing appliances and vending machines

Household and similar electrical appliances - SafetyPart 2-76: Particular requirements for electric fenceenergizers

Safety of household and similar electrical appliancesPart 2-77: Particular requirements for pedestriancontrolled mains-operated lawnmowers

Household and similar electrical appliances - SafetyPart 2-78: Particular requirements for outdoorbarbecues

Household and similar electrical appliances - SafetyPart 2-79: Particular requirements for high pressurecleaners and steam cleaners

Household and similar electrical appliances - SafetyPart 2-80: Particular requirements for fans

Household and similar electrical appliances - SafetyPart 2-81: Particular requirements for foot warmersand heating mats

Household and similar electrical appliances - SafetyPart 2-82: Particular requirements for amusementmachines and personal service machines

Household and similar electrical appliances - SafetyPart 2-83: Particular requirements for heated gulliesfor roof drainage

Household and similar electrical appliances - SafetyPart 2-84: Particular requirements for toilets

Household and similar electrical appliances - SafetyPart 2-85: Particular requirements for fabricsteamers

Household and similar electrical appliances - SafetyPart 2-86: Particular requirements for electric fishingmachines

Household and similar electrical appliances - SafetyPart 2-87: Particular requirements for electricalanimal-stunning equipment

Title

SANS 60335-2-71:2007/IEC 60335-2-71:2007, IDT,Ed. 2.1

SANS 60335-2-72:2003/IEC 60335-2-72:2002, IDT,Ed. 2

SANS 60335-2-73:2003/IEC 60335-2-73:2002, IDT,Ed. 2

SANS 60335-2-74:2003/IEC 60335-2-74:2002, IDT,Ed. 2

SANS 60335-2-75:2009/IEC 60335-2-75:2009, IDT,Ed. 2.2

SANS 60335-2-76:2006/IEC 60335-2-76:2006, IDT,Ed. 2.1

SANS 60335-2-77:2006/IEC 60335-2-77:1996, MOD

SANS 60335-2-78:2003/IEC 60335-2-78:2002, IDT,Ed. 2

SANS 60335-2-79:2008/IEC 60335-2-79:2007, IDT,Ed. 2.2

SANS 60335-2-80:2009/IEC 60335-2-80:2008, IDT,Ed. 2.2

SANS 60335-2-81:2007/IEC 60335-2-81:2007, IDT,Ed. 2.1

SANS 60335-2-82:2009/IEC 60335-2-82:2008, IDT,Ed. 2.1

SANS 60335-2-83:2009/IEC 60335-2-83:2008, IDT,Ed. 1.1

SANS 60335-2-84:2009/IEC 60335-2-84:2008, IDT,Ed. 2.1

SANS 60335-2-85:2009/IEC 60335-2-85:2008, IDT,Ed. 2.1

SANS 60335-2-86:2003/IEC 60335-2-86:2002, IDT,Ed. 2

SANS 60335-2-87:2008/IEC 60335-2-87:2007, IDT,Ed. 2.1

SANS Number

(SABS IEC 60335-2-71)

(SABS IEC 60335-2-72)

(SABS IEC 60335-2-73)

(SABS IEC 60335-2-74)

(SABS IEC 60335-2-75)

(SABS IEC 60335-2-76)

(SABS 60335-2-77)

(SABS IEC 60335-2-78)

(SABS IEC 60335-2-79)

(SABS IEC 60335-2-80)

(SABS IEC 60335-2-81)

(SABS IEC 60335-2-82)

(SABS IEC 60335-2-84)

(SABS IEC 60335-2-85)

(SABS IEC 60335-2-86)

(SABS IEC 60335-2-87)


October 2009

2

1.02

2.01

3

2

3

2.01

1.02

2.02

2.01

1

1

1.01

1.01

1

Edition

Household and similar electrical appliances - SafetyPart 2-88: Particular requirements for humidifiersintended for use with heating, ventilation, or air-conditioning systems

Household and similar electrical appliances - SafetyPart 2-89: Particular requirements for commercialrefrigerating appliances with an incorporated orremote refrigerant condensing unit or compressor

Household and similar electrical appliances - SafetyPart 2-90: Particular requirements for commercialmicrowave ovens

Household and similar electrical appliances - SafetyPart 2-91: Particular requirements for walk-behindand hand-held lawn trimmers and lawn edgetrimmers

Household and similar electrical appliances - SafetyPart 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiers andaerators

Household and similar electrical appliances - SafetyPart 2-94: Particular requirements for scissors typegrass shears

Household and similar electrical appliances - SafetyPart 2-95: Particular requirements for drives forvertically moving garage doors for residential use

Household and similar electrical appliances - SafetyPart 2-96: Particular requirements for flexible sheetheating elements for room heating

Household and similar electrical appliances - SafetyPart 2-97: Particular requirements for drives forrolling shutters, awnings, blinds and similarequipment

Household and similar electrical appliances - SafetyPart 2-98: Particular requirements for humidifiers

Household and similar electrical appliances - SafetyPart 2-99: Particular requirements for commercialelectric hoods

Household and similar electrical appliances - SafetyPart 2-100: Particular requirements for hand-heldmains-operated garden blowers, vacuums andblower vacuums

Household and similar electrical appliances - SafetyPart 2-101: Particular requirements for vaporizers

Household and similar electrical appliances - SafetyPart 2-102: Particular requirements for gas, oil andsolid-fuel burning appliances having electricalconnections

Household and similar electrical appliances - SafetyPart 2-103: Particular requirements for drives forgates, doors and windows

Title

SANS 60335-2-88:2003/IEC 60335-2-88:2002, IDT,Ed. 2

SANS 60335-2-89:2007/IEC 60335-2-89:2007, IDT,Ed. 1.2

SANS 60335-2-90:2004/IEC 60335-2-90:2003, IDT,Ed. 2.1

SANS 60335-2-91:2008/IEC 60335-2-91:2008, IDT,Ed. 3

SANS 60335-2-92:2003/IEC 60335-2-92:2002, IDT,Ed. 2

SANS 60335-2-94:2008/IEC 60335-2-94:2008, IDT,Ed. 3

SANS 60335-2-95:2006/IEC 60335-2-95:2005, IDT,Ed. 2.1

SANS 60335-2-96:2009/IEC 60335-2-96:2008, IDT,Ed. 1.2

SANS 60335-2-97:2009/IEC 60335-2-97:2009, IDT,Ed. 2.2

SANS 60335-2-98:2005/IEC 60335-2-98:2005, IDT,Ed. 2.1

SANS 60335-2-99:2003/IEC 60335-2-99:2003, IDT,Ed. 1

SANS 60335-2-100:2003/IEC 60335-2-100:2002,IDT, Ed. 1

SANS 60335-2-101:2009/IEC 60335-2-101:2008,IDT, Ed. 1.1

SANS 60335-2-102:2009/IEC 60335-2-102:2008,IDT, Ed. 1.1

SANS 60335-2-103:2003/IEC 60335-2-103:2002,IDT, Ed. 1

SANS Number

(SABS IEC 60335-2-88)

(SABS IEC 60335-2-90)

(SABS IEC 60335-2-91)

(SABS IEC 60335-2-92)

(SABS IEC 60335-2-94)

(SABS IEC 60335-2-95)

(SABS IEC 60335-2-97)

(SABS IEC 60335-2-98)


October 2009

1

1.01

1

1.01

1

1

1

2

2

2

2

2

2

2

2

4

Edition

Household and similar electrical appliances - SafetyPart 2-104: Particular requirements for appliances torecover and/or recycle refrigerant from airconditioning and refrigeration equipment

Household and similar electrical appliances - SafetyPart 2-105: Particular requirements formultifunctional shower cabinets

Household and similar electrical appliances - SafetyPart 2-106: Particular requirements for heatedcarpets and for heating units for room heatinginstalled under removable floor coverings

Electric cooking ranges, hobs, ovens and grills forhousehold use - Methods for measuringperformance

Locking devices for ball and socket couplings ofstring insulator units - Dimensions and tests

Insulators for overhead lines with a nominal voltageabove 1 000 V Part 1: Ceramic or glass insulatorunits for a.c. systems - Definitions, test methods andacceptance criteria

Insulators for overhead lines with a nominal voltageabove 1 000 V Part 2: Insulator strings and insulatorsets for a.c. systems - Definitions, test methods andacceptance criteria

Fixed capacitors for use in electronic equipment Part1: Generic specification

Fixed capacitors for use in electronic equipment Part2: Sectional specification: Fixed metallizedpolyethylene-terephthalate film dielectric d.c.capacitors

Fixed capacitors for use in electronic equipment Part2-1: Blank detail specification: Fixed metallizedpolyethylene-terephthalate film dielectric d.c.capacitors - Assessment levels E and EZ

Fixed capacitors for use in electronic equipment Part4: Sectional specification - Aluminium electrolyticcapacitors with solid (Mn02) and non-solidelectrolyte

Fixed capacitors for use in electronic equipment Part6: Sectional specification: Fixed metallizedpolycarbonate film dielectric d.c. capacitors

Fixed capacitors for use in electronic equipment Part6-1: Blank detail specification: Fixed metallizedpolycarbonate film dielectric d.c. capacitors -Assessment level E

Fixed capacitors for use in electronic equipment Part14: Sectional specification - Fixed capacitors forelectromagnetic interference suppression andconnection to the supply mains

Fixed capacitors for use in electronic equipment Part14-1: Blank detail specification: Fixed capacitors forelectromagnetic interference suppression andconnection to the supply mains - Assessment levelD

Lampholders for tubular fluorescent lamps andstarterholders

Title

SANS 60335-2-104:2003/IEC 60335-2-104:2003,IDT, Ed. 1

SANS 60335-2-105:2008/IEC 60335-2-105:2008,IDT, Ed. 1.1

SANS 60335-2-106:2007/IEC 60335-2-106:2007,IDT, Ed. 1

SANS 60350:2006/IEC 60350:2005, IDT, Ed. 2.1

SANS 60372:1984/IEC 60372:1984, IDT, Ed. 3

SANS 60383-1:1993/IEC 60383-1:1993, IDT, Ed. 4

SANS 60383-2:1993/IEC 60383-2:1993, IDT, Ed. 1

SANS 60384-1:1999/IEC 60384-1:1999, IDT, Ed. 3

SANS 60384-2:2007/IEC 60384-2:2005, IDT, Ed. 3

SANS 60384-2-1:2007/IEC 60384-2-1:2005, IDT, Ed.2

SANS 60384-4:2007/IEC 60384-4:2007, IDT, Ed. 4

SANS 60384-6:2007/IEC 60384-6:2005, IDT, Ed. 3

SANS 60384-6-1:2007/IEC 60384-6-1:2005, IDT, Ed.2

SANS 60384-14:2007/IEC 60384-14:2005, IDT, Ed. 3

SANS 60384-14-1:2007/IEC 60384-14-1:2005, IDT,Ed. 2

SANS 60400:2008/IEC 60400:2008, IDT, Ed. 7

SANS Number

(SABS IEC 60350)

(SABS IEC 60372)

(SABS IEC 60383-1)

(SABS IEC 60383-2)

(SABS IEC 60384-1)

(SABS IEC 60384-2)

(SABS IEC 60384-2-1)

(SABS IEC 60384-4)

(SABS IEC 60384-6)

(SABS IEC 60384-6-1)

(SABS IEC 60384-14)

(SABS IEC 60384-14-1)

(SABS IEC 60400)


October 2009

2

1.01

1.01

1.01

3.01

2.01

1.02

2

2

2

2

1

1

2

2

1

1

1

Edition

Conduit systems for cable management - Outsidediameters of conduits for electrical installations andthreads for conduits and fittings

Incandescent lamps - Safety specifications Part 1:Tungsten filament lamps for domestic and similargeneral lighting purposes

Incandescent lamps - Safety specifications Part 2:Tungsten halogen lamps for domestic and similargeneral lighting purposes

Incandescent lamps - Safety specifications Part 3:Tungsten-halogen lamps (non-vehicle)

Low-voltage switchgear and controlgear assembliesPart 1: Type-tested and partially type-testedassemblies

Low-voltage switchgear and controlgear assembliesPart 2: Particular requirements for busbar trunkingsystems (busways)

Low-voltage switchgear and controlgear assembliesPart 3: Particular requirements for low-voltageswitchgear and controlgear assemblies intended tobe installed in places where unskilled persons haveaccess for their use - Distribution boards

Low-voltage switchgear and controlgear assembliesPart 4: Particular requirements for assemblies forconstruction sites (ACS)

Low-voltage switchgear and controlgear assembliesPart 5: Particular requirements for assemblies forpower distribution in public networks

Clothes washing machines for household use -Methods for measuring the performance

High-voltage alternating current contactors andcontactor-based motor-starters

Dimensions of clevis and tongue couplings of stringinsulator units

Stabilized power supplies, d.c. output Part 4: Testsother than radio-frequency interference

Effects of current on human beings and livestockPart 1: General aspects

Effects of current on human beings and livestockPart 2: Special aspects

Effects of current on human beings and livestockPart 4: Effects of lightning strokes on human beingsand livestock

Effects of current on human beings and livestockPart 3: Effects of currents passing through the bodyof livestock

Methods for measuring the performance of electricwarming plates for household and similar purposes

Title

SANS 60423:2008/IEC 60423:2007, IDT, Ed. 3

SANS 60432-1:2006/IEC 60432-1:2005, IDT, Ed. 2.1

SANS 60432-2:2006/IEC 60432-2:2005, IDT, Ed. 2.1

SANS 60432-3:2005/IEC 60432-3:2005, IDT, Ed. 1.1

SANS 60439-1:2004/IEC 60439-1:2004, IDT, Ed. 4.1

SANS 60439-2:2006/IEC 60439-2:2005, IDT, Ed. 3.1

SANS 60439-3:2007/IEC 60439-3:2001, IDT, Ed. 1.2

SANS 60439-4:2005/IEC 60439-4:2004, IDT, Ed. 2

SANS 60439-5:2006/IEC 60439-5:2006, IDT, Ed. 2

SANS 60456:2007/IEC 60456:2003, IDT, Ed. 4

SANS 60470:2008/IEC 60470:2000, IDT, Ed. 2

SANS 60471:1977/IEC 60471:1977, IDT, Ed. 2

SANS 60478-4:1976/IEC 60478-4:1976, IDT, Ed. 1

SANS 60479-1:2006/IEC TS 60479-1:2005, IDT, Ed.4

SANS 60479-2:2007/IEC TS 60479-2:2007, IDT, Ed.3

SANS 60479-4:2005/IEC TR 60479-4:2004, IDT, Ed.1

SANS 60479-3:1998/IEC 60479-3:1998, IDT, Ed. 1

SANS 60496:1975/IEC 60496:1975, IDT, Ed. 1

SANS Number

(SABS IEC 60423)

(SABS IEC 60432-1)

(SABS IEC 60432-2)

(SABS IEC 60439-1)

(SABS IEC 60439-2)

(SABS IEC 60439-3)

(SABS IEC 60439-4)

(SABS IEC 60439-5)

(SABS IEC 60456)

(SABS IEC 60470)

(SABS IEC 60471)

(SABS IEC 60478-4)

(SABS IEC 60479-1)

(SABS IEC 60479-2)

(SABS IEC 60479-3)

(SABS IEC 60496)


October 2009

2

1

1.01

1

2

5

1

1

2

1

1

1

1

1.02

1

2

1

Edition

Power cables with extruded insulation and theiraccessories for rated voltages from 1 kV (Um = 1,2kV) up to 30 kV (Um = 36 kV) Part 4: Testrequirements on accessories for cables with ratedvoltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um =36 kV)

Acceptance inspection of Class 2 alternating-currentwatthour meters

Degrees of protection provided by enclosures (IPCode)

Methods for measuring the performance of electrickettles and jugs for household and similar use

Electrical supply track systems for luminaires

Luminaires Part 1: General requirements and tests

Luminaires Part 2: Particular requirements Section1: Fixed general purpose luminaires

Luminaires Part 2: Particular requirements Section2: Recessed luminaires

Luminaires Part 2-3: Particular requirements -Luminaires for road and street lighting

Luminaires Part 2: Particular requirements Section4: Portable general purpose luminaires

Luminaires Part 2-5: Particular requirements -Floodlights

Luminaires Part 2: Particular requirements Section6: Luminaires with built-in transformers or convertorsfor filament lamps

Luminaires Part 2: Particular requirements Section7: Portable luminaires for garden use

Luminaires Part 2-8: Particular requirements -Handlamps

Luminaires Part 2: Particular requirements Section9: Photo and film luminaires (non-professional)

Luminaires Part 2-10: Particular requirements -Portable luminaires for children

Luminaires Part 2-11: Particular requirements -Aquarium luminaires

Title

SANS 60502-4:2006/IEC 60502-4:2005, IDT, Ed. 2

SANS 60514:1975/IEC 60514:1975, IDT, Ed. 1

SANS 60529:2001/IEC 60529:2001, IDT, Ed. 2.1

SANS 60530:1975/IEC 60530:1975, IDT, Ed. 1

SANS 60570:2003/IEC 60570:2003, IDT, Ed. 4

SANS 60598-1:2009/IEC 60598-1:2008, IDT, Ed. 7

SANS 60598-2-1:1979/IEC 60598-2-1:1979, IDT, Ed.1

SANS 60598-2-2:1997/IEC 60598-2-2:1997, IDT, Ed.2.1

SANS 60598-2-3:2003/IEC 60598-2-3:2002, IDT, Ed.3

SANS 60598-2-4:1997/IEC 60598-2-4:1997, IDT, Ed.2

SANS 60598-2-5:1998/IEC 60598-2-5:1998, IDT, Ed.2

SANS 60598-2-6:1994/IEC 60598-2-6:1994, IDT, Ed.2

SANS 60598-2-7:1982/IEC 60598-2-7:1982, IDT, Ed.1

SANS 60598-2-8:2008/IEC 60598-2-8:2007, IDT, Ed.2.2

SANS 60598-2-9:1987/IEC 60598-2-9:1987, IDT, Ed.2

SANS 60598-2-10:2003/IEC 60598-2-10:2003, IDT,Ed. 2

SANS 60598-2-11:2006/IEC 60598-2-11:2005, IDT,Ed. 1

SANS Number

(SABS IEC 60502-4)

(SABS IEC 60514)

(SABS IEC 60529)

(SABS IEC 60530)

(SABS IEC 60570)

(SABS IEC 60598-1)

(SABS IEC 60598-2-1)

(SABS IEC 60598-2-2)

(SABS IEC 60598-2-3)

(SABS IEC 60598-2-4)

(SABS IEC 60598-2-5)

(SABS IEC 60598-2-6)

(SABS IEC 60598-2-7)

(SABS IEC 60598-2-8)

(SABS IEC 60598-2-9)

(SABS IEC 60598-2-10)


October 2009

1

1

1

1

1

1.02

1.01

1

1

2

2.01

1

1

1

1

1

Edition

Luminaires Part 2-12: Particular requirements -Mains socket-outlet mounted nightlights

Luminaires Part 2-13: Particular requirements -Ground recessed luminaires

Luminaires Part 2: Particular requirements Section17: Luminaires for stage lighting, television, film andphotographic studios (outdoor and indoor)

Luminaires Part 2: Particular requirements Section18: Luminaires for swimming pools and similarapplications

Luminaires Part 2: Particular requirements Section19: Air-handling luminaires (safety requirements)

Luminaires Part 2-20: Particular requirements -Lighting chains

Luminaires Part 2-23: Particular requirements -Extra low voltage lighting systems for filament lamps

Luminaires Part 2: Particular requirements Section24: Luminaires with limited surface temperatures

Luminaires Part 2-25: Particular requirements -Luminaires for use in clinical areas of hospitals andhealth care buildings

Medical electrical equipment Part 1: Generalrequirements for basic safety and essentialperformance

Medical electrical equipment Part 1-2: Generalrequirements for safety - Collateral standard:Electromagnetic compatibility - Requirements andtests

Medical electrical equipment Part 1-10: Generalrequirements for basic safety and essentialperformance - Collateral Standard: Requirements forthe development of physiologic closed-loopcontrollers

Medical electrical equipment Part 2-2: Particularrequirements for the basic safety and essentialperformance of high frequency surgical equipmentand high frequency surgical accessories

Medical electrical equipment Part 2-19: Particularrequirements for the basic safety and essentialperformance of infant incubators

Medical electrical equipment Part 2-20: Particularrequirements for the basic safety and essentialperformance of infant transport incubators

Medical electrical equipment Part 2-21: Particularrequirements for the basic safety and essentialperformance of infant radiant warmers

Title

SANS 60598-2-12:2006/IEC 60598-2-12:2006, IDT,Ed. 1

SANS 60598-2-13:2007/IEC 60598-2-13:2006, IDT,Ed. 1

SANS 60598-2-17:1984/IEC 60598-2-17:1984, IDT,Ed. 1

SANS 60598-2-18:1993/IEC 60598-2-18:1993, IDT,Ed. 2

SANS 60598-2-19:1981/IEC 60598-2-19:1981, IDT,Ed. 1

SANS 60598-2-20:2003/IEC 60598-2-20:2002, IDT,Ed. 2.2

SANS 60598-2-23:2001/IEC 60598-2-23:2001, IDT,Ed. 1.1

SANS 60598-2-24:1997/IEC 60598-2-24:1997, IDT,Ed. 1

SANS 60598-2-25:1994/IEC 60598-2-25:1994, IDT,Ed. 1

SANS 60601-1:2007/IEC 60601-1:2005, IDT, Ed. 3

SANS 60601-1-2:2005/IEC 60601-1-2:2004, IDT, Ed.2.1

SANS 60601-1-10:2009/IEC 60601-1-10:2007, IDT,Ed. 1

SANS 60601-2-2:2009/IEC 60601-2-2:2009, IDT, Ed.5

SANS 60601-2-19:2009/IEC 60601-2-19:2009, IDT,Ed. 2

SANS 60601-2-20:2009/IEC 60601-2-20:2009, IDT,Ed. 2

SANS 60601-2-21:2009/IEC 60601-2-21:2009, IDT,Ed. 2

SANS Number

(SABS IEC 60598-2-17)

(SABS IEC 60598-2-18)

(SABS IEC 60598-2-19)

(SABS IEC 60598-2-20)

(SABS IEC 60598-2-23)

(SABS IEC 60598-2-24)

(SABS IEC 60598-2-25)

(SABS IEC 60601-1)

(SABS IEC 60601-1-2)


October 2009

1

1

1

1

1

1

1

1

1

1

1.1

2.02

3.01

2

2

1

1

Edition

Conduits for electrical installations - SpecificationPart 1: General requirements

Specification for conduits for electrical installationsPart 2: Particular specifications for conduits Section1: Metal conduits

Specification for conduits for electrical installationsPart 2: Particular specification for conduits Section2: Rigid plain conduits of insulating materials

Specification for conduits for electrical installationsPart 2: Particular specifications for conduits Section3: Pliable conduits of insulating material

Specification for conduits for electrical installationsPart 2: Particular specifications for conduits Section4: Pliable self-recovering conduits of insulatingmaterials

Specification for conduits for electrical installationsPart 2: Particular specifications for conduits Section5: Flexible conduits

Specification for conduits for electrical installationsPart 2: Particular specifications for conduits Section6: Pliable conduits of metal or composite materials

Conduits for electrical installations - SpecificationPart 2: Particular specifications for conduits Section7: Rigid non-threadable conduits of aluminium alloy

Secondary cells and batteries containing alkaline orother non-acid electrolytes - Vented nickel-cadmiumprismatic rechargeable single cells

Insulators - Tests on indoor post insulators oforganic material for systems with nominal voltagesgreater than 1 000 V up to but not including 300 kV

High-pressure sodium vapour lamps

Switches for household and similar fixed-electricalinstallations Part 1: General requirements

Switches for household and similar fixed electricalinstallations Part 2-1: Particular requirements -Electronic switches

Switches for household and similar fixed electricalinstallations Part 2-2: Particular requirements -Electromagnetic remote-control switches (RCS)

Switches for household and similar fixed electricalinstallations Part 2-3: Particular requirements -Time-delay switches (TDS)

Switches for household and similar fixed electricalinstallations Part 2-4: Particular requirements -Isolating switches

Boxes and enclosures for electrical accessories forhousehold and similar fixed electrical installationsPart 1: General requirements

Title

SANS 60614-1:1994/IEC 60614-1:1994, IDT, Ed. 2

SANS 60614-2-1:1982/IEC 60614-2-1:1982, IDT, Ed.1

SANS 60614-2-2:1980/IEC 60614-2-2:1980, IDT, Ed.1

SANS 60614-2-3:1990/IEC 60614-2-3:1990, IDT, Ed.1

SANS 60614-2-4:1985/IEC 60614-2-4:1985, IDT, Ed.1

SANS 60614-2-5:1992/IEC 60614-2-5:1992, IDT, Ed.1

SANS 60614-2-6:1992/IEC 60614-2-6:1992, IDT, Ed.1

SANS 60614-2-7:1995/IEC 60614-2-7:1995, IDT, Ed.1

SANS 60623:2001/IEC 60623:2001, IDT, Ed. 4

SANS 60660:1999/IEC 60660:1999, IDT, Ed. 2

SANS 60662:2003/IEC 60662:2002, IDT, Ed. 1.10

SANS 60669-1:2007/IEC 60669-1:2007, IDT, Ed. 3.2

SANS 60669-2-1:2009/IEC 60669-2-1:2009, IDT, Ed.4.1

SANS 60669-2-2:2007/IEC 60669-2-2:2006, IDT, Ed.3

SANS 60669-2-3:2007/IEC 60669-2-3:2006, IDT, Ed.3

SANS 60669-2-4:2005/IEC 60669-2-4:2004, IDT, Ed.1

SANS 60670-1:2003/IEC 60670-1:2002, IDT, Ed. 1

SANS Number

(SABS IEC 60614-1)

(SABS IEC 60614-2-1)

(SABS IEC 60614-2-2)

(SABS IEC 60614-2-3)

(SABS IEC 60614-2-4)

(SABS IEC 60614-2-5)

(SABS IEC 60614-2-6)

(SABS IEC 60614-2-7)

(SABS IEC 60623)

(SABS IEC 60660)

(SABS IEC 60662)

(SABS IEC 60669-1)

(SABS IEC 60669-2-1)

(SABS IEC 60669-2-2)

(SABS IEC 60669-2-3)


October 2009

1

1

1

1

1.01

2.02

1.01

2.02

1

1

2.02

1.01

1

1

1.02

1

Edition

Boxes and enclosures for electrical accessories forhousehold and similar fixed electrical installationsPart 21: Particular requirements for boxes andenclosures with provision for suspension means

Boxes and enclosures for electrical accessories forhousehold and similar fixed electrical installationsPart 22: Particular requirements for connectingboxes and enclosures

Boxes and enclosures for electrical accessories forhousehold and similar fixed electrical installationsPart 23: Particular requirements for floor boxes andenclosures

Boxes and enclosures for electrical accessories forhousehold and similar fixed electrical installationsPart 24: Particular requirements for enclosures forhousing protective devices and similar powerconsuming devices

Household electric direct-acting room heaters -Methods for measuring performance

Common specifications for high-voltage switchgearand controlgear standards

Fire hazard testing Part 11-10: Test flames - 50 Whorizontal and vertical flame test methods

Household microwave ovens - Methods formeasuring performance

Characteristics of line post insulators

Cabled distribution systems for television and soundsignals Part 2: Electromagnetic compatibility forequipment

Automatic electrical controls for household andsimilar use Part 1: General requirements

Automatic electrical controls for household andsimilar use Part 2-2: Particular requirements forthermal motor protectors

Automatic electrical controls for household andsimilar use Part 2-3: Particular requirements forthermal protectors for ballasts for tubular fluorescentlamps

Automatic electrical controls for household andsimilar use Part 2-4: Particular requirements forthermal motor protectors for motor-compressors ofhermetic and semi-hermetic type

Automatic electrical controls for household andsimilar use Part 2-5: Particular requirements forautomatic electrical burner control systems

Automatic electrical controls for household andsimilar use Part 2-6: Particular requirements forautomatic electrical pressure sensing controlsincluding mechanical requirements

Title

SANS 60670-21:2005/IEC 60670-21:2004, IDT, Ed. 1

SANS 60670-22:2003/IEC 60670-22:2003, IDT, Ed. 1

SANS 60670-23:2006/IEC 60670-23:2006, IDT, Ed. 1

SANS 60670-24:2006/IEC 60670-24:2005, IDT, Ed. 1

SANS 60675:2006/IEC 60675:1998, IDT, Ed. 2.1

SANS 60694:2003/IEC 60694:2002, IDT, Ed. 2.2

SANS 60695-11-10:2004/IEC 60695-11-10:2003,IDT, Ed. 1.1

SANS 60705:2006/IEC 60705:2006, IDT, Ed. 3.2

SANS 60720:1981/IEC 60720:1981, IDT, Ed. 1

SANS 60728-2:2005/IEC 60728-2:2002, IDT, Ed. 1

SANS 60730-1:2007/IEC 60730-1:2007, IDT, Ed. 3.2

SANS 60730-2-2:2007/IEC 60730-2-2:2005, IDT, Ed.2.1

SANS 60730-2-3:2007/IEC 60730-2-3:2006, IDT, Ed.2

SANS 60730-2-4:2007/IEC 60730-2-4:2006, IDT, Ed.2

SANS 60730-2-5:2009/IEC 60730-2-5:2008, IDT, Ed.3.2

SANS 60730-2-6:2007/IEC 60730-2-6:2007, IDT, Ed.2

SANS Number

(SABS IEC 60675)

(SABS IEC 60694)

(SABS IEC 60705)

(SABS IEC 60720)

(SABS IEC 60730-1)


October 2009

2

1.01

2

1

2

1

1

1.02

2

1.02

1.02

1

1.02

2

3.02

2

Edition

Automatic electrical controls for household andsimilar use Part 2-7: Particular requirements fortimers and time switches

Automatic electrical controls for household andsimilar use Part 2-8: Particular requirements forelectrically operated water valves, includingmechanical requirements

Automatic electrical controls for household andsimilar use Part 2-9: Particular requirements fortemperature sensing controls

Automatic electrical controls for household andsimilar use Part 2-10: Particular requirements formotor-starting relays

Automatic electrical controls for household andsimilar use Part 2-11: Particular requirements forenergy regulators

Automatic electrical controls for household andsimilar use Part 2-12: Particular requirements forelectrically operated door locks

Automatic electrical controls for household andsimilar use Part 2-13: Particular requirements forhumidity sensing controls

Automatic electrical controls for household andsimilar use Part 2-14: Particular requirements forelectric actuators

Automatic electrical controls for household andsimilar use Part 2-15: Particular requirements forautomatic electrical air flow, water flow and waterlevel sensing controls

Automatic electrical controls for household andsimilar use Part 2-16: Particular requirements forautomatic electrical water level controls of the floattype for household and similar applications

Automatic electrical controls for household andsimilar use Part 2-17: Particular requirements forelectrically operated gas valves, includingmechanical requirements

Automatic electrical controls for household andsimilar use Part 2-18: Particular requirements forautomatic electrical water and air flow sensingcontrols, including mechanical requirements

Automatic electrical controls for household andsimilar use Part 2-19: Particular requirements forelectrically operated oil valves, including mechanicalrequirements

Household electrical appliances - Performance -Hard water for testing

Hand-held motor-operated electric tools - SafetyPart 1: General requirements

Hand-held motor-operated electric tools - SafetyPart 2-1: Particular requirements for drills andimpact drills

Title

SANS 60730-2-7:2008/IEC 60730-2-7:2008, IDT, Ed.2

SANS 60730-2-8:2003/IEC 60730-2-8:2003, IDT, Ed.2.1

SANS 60730-2-9:2008/IEC 60730-2-9:2008, IDT, Ed.3

SANS 60730-2-10:2007/IEC 60730-2-10:2006, IDT,Ed. 2

SANS 60730-2-11:2007/IEC 60730-2-11:2006, IDT,Ed. 2

SANS 60730-2-12:2007/IEC 60730-2-12:2005, IDT,Ed. 2

SANS 60730-2-13:2007/IEC 60730-2-13:2006, IDT,Ed. 2

SANS 60730-2-14:2008/IEC 60730-2-14:2008, IDT,Ed. 1.2

SANS 60730-2-15:2008/IEC 60730-2-15:2008, IDT,Ed. 2

SANS 60730-2-16:2007/IEC 60730-2-16:2001, IDT,Ed. 1.2

SANS 60730-2-17:2008/IEC 60730-2-17:2007, IDT,Ed. 1.2

SANS 60730-2-18:2007/IEC 60730-2-18:1997, IDT,Ed. 1

SANS 60730-2-19:2008/IEC 60730-2-19:2007, IDT,Ed. 1.2

SANS 60734:2006/IEC 60734:2001, IDT, Ed. 3

SANS 60745-1:2004/IEC 60745-1:2003, IDT, Ed. 3.2

SANS 60745-2-1:2004/IEC 60745-2-1:2003, IDT, Ed.2

SANS Number

(SABS IEC 60730-2-9)

(SABS IEC 60730-2-11)

(SABS IEC 60734)

(SABS IEC 60745-1)

(SABS IEC 60745-2-1)


October 2009

2.01

2

2

3

2.01

1

2

2.01

2

2

2

2

2

2

2

1.01

1

Edition

Hand-held motor-operated electric tools - SafetyPart 2-2: Particular requirements for screwdriversand impact wrenches

Hand-held motor-operated electric tools - SafetyPart 2-3: Particular requirements for grinders,polishers and disk-type sanders

Hand-held motor-operated electric tools - SafetyPart 2-4: Particular requirements for sanders andpolishers other than disk type

Hand-held motor-operated electric tools - SafetyPart 2-5: Particular requirements for circular saws

Hand-held motor-operated electric tools - SafetyPart 2-6: Particular requirements for hammers

Safety of hand-held motor-operated electric toolsPart 2-7: Particular requirements for spray guns fornon-flammable liquids

Hand-held motor-operated electric tools - SafetyPart 2-8: Particular requirements for shears andnibblers

Hand-held motor-operated electric tools - SafetyPart 2-9: Particular requirements for tappers

Hand-held motor-operated electric tools - SafetyPart 2-11: Particular requirements for reciprocatingsaws (jig and sabre saws)

Hand-held motor-operated electric tools - SafetyPart 2-12: Particular requirements for concretevibrators

Hand-held motor-operated electric tools - SafetyPart 2-13: Particular requirements for chain saws

Hand-held motor-operated electric tools - SafetyPart 2-14: Particular requirements for planers

Hand-held motor-operated electric tools - SafetyPart 2-15: Particular requirements for hedgetrimmers

Hand-held motor-operated electric tools - SafetyPart 2-16: Particular requirements for tackers

Hand-held motor-operated electric tools - SafetyPart 2-17: Particular requirements for routers andtrimmers

Hand-held motor-operated electric tools - SafetyPart 2-18: Particular requirements for strapping tools

Hand-held motor-operated electric tools - SafetyPart 2-19: Particular requirements for jointers

Title

SANS 60745-2-2:2008/IEC 60745-2-2:2008, IDT, Ed.2.1

SANS 60745-2-3:2007/IEC 60745-2-3:2006, IDT, Ed.2

SANS 60745-2-4:2007/IEC 60745-2-4:2006, IDT, Ed.2

SANS 60745-2-5:2003/IEC 60745-2-5:2003, IDT, Ed.3

SANS 60745-2-6:2007/IEC 60745-2-6:2006, IDT, Ed.2.1

SANS 60745-2-7:1989/IEC 60745-2-7:1989, IDT, Ed.1

SANS 60745-2-8:2003/IEC 60745-2-8:2003, IDT, Ed.2

SANS 60745-2-9:2009/IEC 60745-2-9:2008, IDT, Ed.2.1

SANS 60745-2-11:2003/IEC 60745-2-11:2003, IDT,Ed. 2

SANS 60745-2-12:2003/IEC 60745-2-12:2003, IDT,Ed. 2

SANS 60745-2-13:2007/IEC 60745-2-13:2006, IDT,Ed. 2

SANS 60745-2-14:2003/IEC 60745-2-14:2003, IDT,Ed. 2

SANS 60745-2-15:2007/IEC 60745-2-15:2006, IDT,Ed. 2

SANS 60745-2-16:2008/IEC 60745-2-16:2008, IDT,Ed. 2

SANS 60745-2-17:2003/IEC 60745-2-17:2003, IDT,Ed. 2

SANS 60745-2-18:2008/IEC 60745-2-18:2008, IDT,Ed. 1.1

SANS 60745-2-19:2006/IEC 60745-2-19:2005, IDT,Ed. 1

SANS Number

(SABS IEC 60745-2-2)

(SABS IEC 60745-2-3)

(SABS IEC 60745-2-4)

(SABS IEC 60745-2-5)

(SABS IEC 60745-2-6)

(SABS IEC 60745-2-7)

(SABS IEC 60745-2-8)

(SABS IEC 60745-2-9)

(SABS IEC 60745-2-11)

(SABS IEC 60745-2-12)

(SABS IEC 60745-2-13)

(SABS IEC 60745-2-14)

(SABS IEC 60745-2-15)

(SABS IEC 60745-2-16)

(SABS IEC 60745-2-17)


October 2009

1.01

1

1

1

1

3

1

1

1

1

1

1

1

2

1

2

2

Edition

Hand-held motor-operated electric tools - SafetyPart 2-20: Particular requirements for band saws

Hand-held motor-operated electric tools - SafetyPart 2-21: Particular requirements for drain cleaners

Industrial platinum resistance thermometer sensors

Test on gases evolved during combustion ofmaterials from cables Part 1: Determination of theamount of halogen acid gas

Test on gases evolved during combustion ofmaterials from cables Part 2: Determination ofdegree of acidity of gases by measuring pH andconductivity

Optical fibres Part 1-1: Measurement methods andtest procedures - General and guidance

Optical fibres Part 1-20: Measurement methods andtest procedures - Fibre geometry

Optical fibres Part 1-21: Measurement methods andtest procedures - Coating geometry

Optical fibres Part 1-22: Measurement methods andtest procedures - Length measurement

Optical fibres Part 1-30: Measurement methods andtest procedures - Fibre proof test

Optical fibres Part 1-31: Measurement methods andtest procedures - Tensile strength

Optical fibres Part 1-32: Measurement methods andtest procedures - Coating strippability

Optical fibres Part 1-33: Measurement methods andtest procedures - Stress corrosion susceptibility

Optical fibres Part 1-34: Measurement methods andtest procedures - Fibre curl

Optical fibres Part 1-40: Measurement methods andtest procedures - Attenuation

Optical fibres Part 1-41: Measurement methods andtest procedures - Bandwidth

Optical fibres Part 1-42: Measurement methods andtest procedures - Chromatic dispersion

Title

SANS 60745-2-20:2009/IEC 60745-2-20:2008, IDT,Ed. 1.1

SANS 60745-2-21:2003/IEC 60745-2-21:2002, IDT,Ed. 1

SANS 60751:1983/IEC 60751:1983, IDT, Ed. 1

SANS 60754-1:1994/IEC 60754-1:1994, IDT, Ed. 2

SANS 60754-2:1991/IEC 60754-2:1991, IDT, Ed. 1

SANS 60793-1-1:2008/IEC 60793-1-1:2008, IDT, Ed.3

SANS 60793-1-20:2002/IEC 60793-1-20:2001, IDT,Ed. 1

SANS 60793-1-21:2001/IEC 60793-1-21:2001, IDT,Ed. 1

SANS 60793-1-22:2001/IEC 60793-1-22:2001, IDT,Ed. 1

SANS 60793-1-30:2001/IEC 60793-1-30:2001, IDT,Ed. 1

SANS 60793-1-31:2001/IEC 60793-1-31:2001, IDT,Ed. 1

SANS 60793-1-32:2001/IEC 60793-1-32:2001, IDT,Ed. 1

SANS 60793-1-33:2001/IEC 60793-1-33:2001, IDT,Ed. 1

SANS 60793-1-34:2006/IEC 60793-1-34:2006, IDT,Ed. 2

SANS 60793-1-40:2001/IEC 60793-1-40:2001, IDT,Ed. 1

SANS 60793-1-41:2006/IEC 60793-1-41:2003, IDT,Ed. 2

SANS 60793-1-42:2008/IEC 60793-1-42:2007, IDT,Ed. 2

SANS Number

(SABS IEC 60751)

(SABS IEC 60754-1)

(SABS IEC 60754-2)

(SABS IEC 60793-1-1)

(SABS IEC 60793-1-21)

(SABS IEC 60793-1-22)

(SABS IEC 60793-1-30)

(SABS IEC 60793-1-31)

(SABS IEC 60793-1-32)

(SABS IEC 60793-1-33)

(SABS IEC 60793-1-34)

(SABS IEC 60793-1-40)

(SABS IEC 60793-1-41)

(SABS IEC 60793-1-42)


October 2009

1

1

1

1

2

2

2

1

1

1

1

1

4

3

2

2

2

Edition

Optical fibres Part 1-43: Measurement methods andtest procedures - Numerical aperture

Optical fibres Part 1-44: Measurement methods andtest procedures - Cut-off wavelength

Optical fibres Part 1-45: Measurement methods andtest procedures - Mode field diameter

Optical fibres Part 1-46: Measurement methods andtest procedures - Monitoring of changes in opticaltransmittance

Optical fibres Part 1-47: Measurement methods andtest procedures - Macrobending loss

Optical fibres Part 1-48: Measurement methods andtest procedures - Polarization mode dispersion

Optical fibres Part 1-49: Measurement methods andtest procedures - Differential mode delay

Optical fibres Part 1-50: Measurement methods andtest procedures - Damp heat (steady state)

Optical fibres Part 1-51: Measurement methods andtest procedures - Dry heat

Optical fibres Part 1-52: Measurement methods andtest procedures - Change of temperature

Optical fibres Part 1-53: Measurement methods andtest procedures - Water immersion

Optical fibres Part 1-54: Measurement methods andtest procedures - Gamma irradiation

Optical fibres Part 2: Product specifications -General

Optical fibres Part 2-10: Product specifications -Sectional specification for category A1 multimodefibres




Title

SANS 60793-1-43:2001/IEC 60793-1-43:2001, IDT,Ed. 1

SANS 60793-1-44:2001/IEC 60793-1-44:2001, IDT,Ed. 1

SANS 60793-1-45:2001/IEC 60793-1-45:2001, IDT,Ed. 1

SANS 60793-1-46:2001/IEC 60793-1-46:2001, IDT,Ed. 1

SANS 60793-1-47:2007/IEC 60793-1-47:2006, IDT,Ed. 2

SANS 60793-1-48:2007/IEC 60793-1-48:2007, IDT,Ed. 2

SANS 60793-1-49:2006/IEC 60793-1-49:2006, IDT,Ed. 2

SANS 60793-1-50:2001/IEC 60793-1-50:2001, IDT,Ed. 1

SANS 60793-1-51:2001/IEC 60793-1-51:2001, IDT,Ed. 1

SANS 60793-1-52:2001/IEC 60793-1-52:2001, IDT,Ed. 1

SANS 60793-1-53:2001/IEC 60793-1-53:2001, IDT,Ed. 1

SANS 60793-1-54:2004/IEC 60793-1-54:2003, IDT,Ed. 1

SANS 60793-2:2008/IEC 60793-2:2007, IDT, Ed. 6

SANS 60793-2-10:2008/IEC 60793-2-10:2007, IDT,Ed. 3

SANS 60793-2-20:2008/IEC 60793-2-20:2007, IDT,Ed. 2

SANS 60793-2-30:2008/IEC 60793-2-30:2007, IDT,Ed. 2

SANS 60793-2-40:2006/IEC 60793-2-40:2006, IDT,Ed. 2

SANS Number

(SABS IEC 60793-1-43)

(SABS IEC 60793-1-44)

(SABS IEC 60793-1-45)

(SABS IEC 60793-1-46)

(SABS IEC 60793-1-47)

(SABS IEC 60793-1-50)

(SABS IEC 60793-1-51)

(SABS IEC 60793-1-52)

(SABS IEC 60793-1-53)

(SABS IEC 60793-2)


October 2009

3

2

2

1

1

2

1

2

1

1

1

2

3

2

1

1

1

Edition

Optical fibres Part 2-50: Product specifications -Sectional specification for class B single-mode fibres

Optical fibre cables Part 1-1: Generic specification -General

Optical fibre cables Part 1-2: Generic specification -Basic optical cable test procedures

Optical fibre cables Part 2-10: Indoor cables - Familyspecification for simplex and duplex cables

Optical fibre cables Part 2-11: Indoor cables -Detailed specification for simplex and duplex cablesfor use in premises cabling

Optical fibre cables Part 2-20: Indoor cables - Familyspecification for multi-fibre optical distribution cables

Optical fibre cables Part 2-21: Indoor cables -Detailed specification for multi-fibre opticaldistribution cables for use in premises cabling

Optical fibre cables Part 2-30: Indoor cables - Familyspecification for ribbon cables

Optical fibre cables Part 2-31: Indoor cables -Detailed specification for optical fibre ribbon cablesfor use in premises cabling

Optical fibre cables Part 2-40: Indoor cables - Familyspecification for simplex and duplex cables withbuffered A4 fibres

Optical fibre cables Part 2-50: Indoor cables - Familyspecification for simplex and duplex cables for usein terminated cable assemblies

Optical fibre cables Part 2: Indoor cables - Sectionalspecification

Optical fibre cables Part 3: Sectional specification -Outdoor cables

Optical fibre cables Part 3-10: Outdoor cables -Family specification for duct, directly buried andlashed aerial optical telecommunication cables

Optical fibre cables Part 3-11: Outdoor cables -Detailed specification for duct and directly buriedsingle-mode optical fibre telecommunication cables

Optical fibre cables Part 3-12: Outdoor cables -Detailed specification for duct and directly buriedoptical telecommunication cables for use inpremises cabling

Optical fibre cables Part 3-20: Outdoor cables -Family specification for optical self-supporting aerialtelecommunication cables

Title

SANS 60793-2-50:2008/IEC 60793-2-50:2008, IDT,Ed. 3

SANS 60794-1-1:2001/IEC 60794-1-1:2001, IDT, Ed.2

SANS 60794-1-2:2003/IEC 60794-1-2:2003, IDT, Ed.2

SANS 60794-2-10:2006/IEC 60794-2-10:2003, IDT,Ed. 1

SANS 60794-2-11:2006/IEC 60794-2-11:2005, IDT,Ed. 1

SANS 60794-2-20:2009/IEC 60794-2-20:2008, IDT,Ed. 2

SANS 60794-2-21:2006/IEC 60794-2-21:2005, IDT,Ed. 1

SANS 60794-2-30:2009/IEC 60794-2-30:2008, IDT,Ed. 2

SANS 60794-2-31:2006/IEC 60794-2-31:2005, IDT,Ed. 1

SANS 60794-2-40:2006/IEC 60794-2-40:2003, IDT,Ed. 1

SANS 60794-2-50:2008/IEC 60794-2-50:2008, IDT,Ed. 1

SANS 60794-2:2003/IEC 60794-2:2002, IDT, Ed. 3

SANS 60794-3:2001/IEC 60794-3:2001, IDT, Ed. 3

SANS 60794-3-10:2009/IEC 60794-3-10:2009, IDT,Ed. 2

SANS 60794-3-11:2008/IEC 60794-3-11:2007, IDT,Ed. 1

SANS 60794-3-12:2006/IEC 60794-3-12:2005, IDT,Ed. 1

SANS 60794-3-20:2003/IEC 60794-3-20:2002, IDT,Ed. 1

SANS Number

(SABS IEC 60794-1-1)

(SABS IEC 60794-1-2)

(SABS IEC 60794-2)

(SABS IEC 60794-3)


October 2009

1

1

1

1

1.01

1

2.01

1

2.01

1

1

2

Edition

Optical fibre cables Part 3-21: Outdoor cables -Detailed specification for optical self-supportingaerial telecommunication cables for use in premisescabling

Optical fibre cables Part 4: Sectional specification -Aerial optical cables along electrical power lines

Optical fibre cables Part 5: Sectional specification -Microduct cabling for installation by blowing

Electrical accessories - Cord sets andinterconnection cord sets

Common test methods for insulating and sheathingmaterials of electric cables and optical cables Part1-1: Methods for general application - Measurementof thickness and overall dimensions - Tests fordetermining the mechanical properties

Common test methods for insulating and sheathingmaterials of electric and optical cables Part 1:Methods for general application Section 2: Thermalageing methods

Common test methods for insulating and sheathingmaterials of electric and optical cables Part 1-3:General application - Methods for determining thedensity - Water absorption tests - Shrinkage test

Common test methods for insulating and sheathingmaterials of electric and optical cables Part 1-4:Methods for general application - Test at lowtemperature

Common test methods for insulating and sheathingmaterials of electric and optical cables Part 2-1:Methods specific to elastomeric compounds - Ozoneresistance, hot set and mineral oil immersion tests

Common test methods for insulating and sheathingmaterials of electric cables Part 3: Methods specificto PVC compounds Section 1 - Pressure test at hightemperature - Tests for resistance to cracking

Common test methods for insulating and sheathingmaterials of electric cables Part 3-2: Methodsspecific to PVC compounds - Loss of mass test -Thermal stability test

Insulating and sheathing materials of electric andoptical cables - Common test methods Part 4-1:Methods specific to polyethylene and polypropylenecompounds - Resistance to environmental stresscracking - Measurement of the melt flow index -Carbon black and/or mineral filler contentmeasurement in polyethylene by direct combustion -Measurement of carbon black content bythermogravimetric analysis (TGA) - Assessment ofcarbon black dispersion in polyethylene using amicroscope

Title

SANS 60794-3-21:2006/IEC 60794-3-21:2005, IDT,Ed. 1

SANS 60794-4:2004/IEC 60794-4:2003, IDT, Ed. 1

SANS 60794-5:2007/IEC 60794-5:2006, IDT, Ed. 1

SANS 60799:2007/IEC 60799:1998, IDT, Ed. 2

SANS 60811-1-1:2001/IEC 60811-1-1:2001, IDT, Ed.2.1

SANS 60811-1-2:1985/IEC 60811-1-2:1985, IDT, Ed.1

SANS 60811-1-3:2001/IEC 60811-1-3:2001, IDT, Ed.2.1

SANS 60811-1-4:1985/IEC 60811-1-4:1985, IDT, Ed.1

SANS 60811-2-1:2003/IEC 60811-2-1:2001, IDT, Ed.2.1

SANS 60811-3-1:1985/IEC 60811-3-1:1985, IDT, Ed.1

SANS 60811-3-2:1985/IEC 60811-3-2:1985, IDT, Ed.1

SANS 60811-4-1:2004/IEC 60811-4-1:2004, IDT, Ed.2

SANS Number

(SABS IEC 60811-1-1)

(SABS IEC 60811-1-2)

(SABS IEC 60811-1-3)

(SABS IEC 60811-1-4)

(SABS IEC 60811-2-1)

(SABS IEC 60811-3-1)

(SABS IEC 60811-3-2)

(SABS IEC 60811-4-1)


October 2009

2

1.01

1

1

1

1

1.01

1

1

1

1

1

1

1

Edition

Insulating and sheathing materials of electric andoptical cables - Common test methods Part 4-2:Methods specific to polyethylene and polypropylenecompounds - Tensile strength and elongation atbreak after conditioning at elevated temperature -Wrapping test after conditioning at elevatedtemperature - Wrapping test after thermal ageing inair - Measurement of mass increase - Long-termstability test - Test method for copper-catalyzedoxidative degradation

Insulating and sheathing materials of electric andoptical cables - Common test methods Part 5-1:Methods specific to filling compounds - Drop-point -Separation of oil - Lower temperature brittleness -Total acid number - Absence of corrosivecomponents - Permittivity at 23 °C - DC resistivity at23 °C and 100 °C

Selection and dimensioning of high-voltageinsulators intended for use in polluted conditionsPart 1: Definitions, information and generalprinciples

Selection and dimensioning of high-voltageinsulators intended for use in polluted conditionsPart 2: Ceramic and glass insulators for a.c.systems

Selection and dimensioning of high-voltageinsulators intended for use in polluted conditionsPart 3: Polymer insulators for a.c. systems

Insulating poles (insulating sticks) and universal toolattachments (fittings) for live working

Miscellaneous lampholders Part 1: Generalrequirements and tests

Miscellaneous lampholders Part 2-2: Particularrequirements - Connectors for LED-modules

Alarm systems Part 1: General requirements SectionOne: General

Alarm systems Part 1: General requirements SectionTwo: Power units, test methods and performancecriteria

Alarm systems Part 1: General requirements SectionThree: Environmental testing

Alarm systems Part 2: Requirements for intruderalarm systems Section Two: Requirements fordetectors - General

Alarm systems Part 2: Requirements for intruderalarm systems Section 7: Passive glass-breakdetectors for use in buildings

Power cables with extruded insulation and theiraccessories for rated voltages above 30 kV (Um =36 kV) up to 150 kV (Um = 170 kV) - Test methodsand requirements

Title

SANS 60811-4-2:2004/IEC 60811-4-2:2004, IDT, Ed.2

SANS 60811-5-1:2004/IEC 60811-5-1:2004, IDT, Ed.1.1

SANS 60815-1:2009/IEC/TS 60815-1:2008, IDT, Ed.1

SANS 60815-2:2009/IEC/TS 60815-2:2008, IDT, Ed.1

SANS 60815-3:2009/IEC/TS 60815-3:2008, IDT, Ed.1

SANS 60832:2006/IEC 60832:1988, IDT, Ed. 1

SANS 60838-1:2008/IEC 60838-1:2008, IDT, Ed. 4.1

SANS 60838-2-2:2006/IEC 60838-2-2:2006, IDT, Ed.1

SANS 60839-1-1:2007/IEC 60839-1-1:1988, IDT, Ed.1

SANS 60839-1-2:2007/IEC 60839-1-2:1987, IDT, Ed.1

SANS 60839-1-3:2007/IEC 60839-1-3:1988, IDT, Ed.1

SANS 60839-2-2:2007/IEC 60839-2-2:1987, IDT, Ed.1

SANS 60839-2-7:1994/IEC 60839-2-7:1994, IDT, Ed.1

SANS 60840:2006/IEC 60840:2004, IDT, Ed. 3

SANS Number

(SABS IEC 60811-4-2)

(SABS IEC 60811-5-1)

(SABS IEC 60839-2-7)


October 2009

1

1.01

1.01

2.02

1.02

1

1

1

1

1

1

3

2

1

1

1

2.01

2

Edition

Winding wires - Test methods Part 1: General

Winding wires - Test methods Part 2: Determinationof dimensions

Winding wires - Test methods Part 3: Mechanicalproperties

Winding wires - Test methods Part 4: Chemicalproperties

Winding wires - Test methods Part 5: Electricalproperties

Winding wires - Test methods Part 6: Thermalproperties

Standardization of interconnections betweenbroadcasting transmitters or transmitter systems andsupervisory equipment Part 1: Interface standardsfor systems using dedicated interconnections

Standardization of interconnections betweenbroadcasting transmitters or transmitter systems andsupervisory equipment Part 2: Interface standardsfor systems using data bus type interconnections

Short-circuit currents - Calculation of effects Part 1:Definitions and calculation methods

Short-circuit currents - Calculation of effects Part 2:Examples of calculation

Fibre optic attenuators Part 1: Generic specification

Connectors for optical fibres and cables Part 1:Generic specification

Connectors for optical fibres and cables Part 1-1:Blank detail specification

Connectors for optical fibres and cables Part 14-1:Detail specification for fibre optic connector type SC-PC standard terminated to multimode fibre type A1a,A1b

Connectors for optical fibres and cables Part 14-2:Detail specification for fibre optic connector type SC-PC tuned terminated to single-mode fibre type B1

Connectors for optical fibres and cables Part 19-2:Fibre optic adaptor (duplex) type SC for single-modefibre connectors - Detail specification

Plugs and socket-outlets for household and similarpurposes Part 1: General requirements

Plugs and socket-outlets for household and similarpurposes Part 2-2: Particular requirements forsocket-outlets for appliances

Title

SANS 60851-1:1996/IEC 60851-1:1996, IDT, Ed. 2

SANS 60851-2:2004/IEC 60851-2:1997, IDT, Ed. 2.1

SANS 60851-3:2004/IEC 60851-3:1997, IDT, Ed. 2.1

SANS 60851-4:2006/IEC 60851-4:2005, IDT

SANS 60851-5:2004/IEC 60851-5:2004, IDT, Ed. 3.2

SANS 60851-6:1996/IEC 60851-6:1996, IDT, Ed. 2

SANS 60864-1:1986/IEC 60864-1:1986, IDT, Ed. 1

SANS 60864-2:1997/IEC 60864-2:1997, IDT, Ed. 1

SANS 60865-1:2006/IEC 60865-1:1993, IDT, Ed. 2

SANS 60865-2:2008/IEC/TR 60865-2:1994, IDT, Ed.1

SANS 60869-1:1999/IEC 60869-1:1999, IDT, Ed. 3

SANS 60874-1:2007/IEC 60874-1:2006, IDT, Ed. 5

SANS 60874-1-1:2007/IEC 60874-1-1:2006, IDT, Ed.2

SANS 60874-14-1:1997/IEC 60874-14-1:1997, IDT,Ed. 1

SANS 60874-14-2:1997/IEC 60874-14-2:1997, IDT,Ed. 1

SANS 60874-19-2:1999/IEC 60874-19-2:1999, IDT,Ed. 1

SANS 60884-1:2006/IEC 60884-1:2006, IDT, Ed. 3.1

SANS 60884-2-2:2007/IEC 60884-2-2:2006, IDT, Ed.2

SANS Number

(SABS IEC 60851-1)

(SABS IEC 60851-2)

(SABS IEC 60851-3)

(SABS IEC 60851-4)

(SABS IEC 60851-5)

(SABS IEC 60851-6)

(SABS IEC 60864-1)

(SABS IEC 60864-2)

(SABS IEC 60869-1)

(SABS IEC 60874-1)

(SABS IEC 60874-1-1)

(SABS IEC 60874-14-1)

(SABS IEC 60874-14-2)

(SABS IEC 60874-19-2)

(SABS IEC 60884-1)

(SABS IEC 60884-2-2)


October 2009

2

3

1

1

1

1

1

1

1

2.04

2

1

2.01

3.01

1.02

3

3

2.01

2

Edition

Plugs and socket-outlets for household and similarpurposes Part 2-3: Particular requirements forswitched socket-outlets without interlock for fixedinstallations

Plugs and socket-outlets for household and similarpurposes Part 2-4: Particular requirements for plugsand socket-outlets for SELV

Plugs and socket-outlets for household and similarpurposes Part 2-5: Particular requirements foradaptors

Plugs and socket-outlets for household and similarpurposes Part 2: Particular requirements forswitched socket-outlets with interlock for fixedelectrical installations

A method of temperature-rise assessment byextrapolation for partially type-tested assemblies(PTTA) of low-voltage switchgear and controlgear

Stationary lead-acid batteries Part 11: Vented types- General requirements and methods of test

Stationary lead-acid batteries Part 21: Valveregulated types - Methods of test

Stationary lead-acid batteries Part 22: Valveregulated types - Requirements

Live working - Hand tools for use up to 1 000 V a.c.and 1 500 V d.c.

Single-capped fluorescent lamps - Performancespecifications

Live working - Gloves of insulating material

IEC system of plugs and socket-outlets forhousehold and similar purposes Part 3: SELV plugsand socket-outlets, 16 A 6 V, 12 V, 24 V, 48 V, a.cand d.c

Ballasts for tubular fluorescent lamps - Performancerequirements

Auxiliaries for lamps - Ballasts for discharge lamps(excluding tubular fluorescent lamps) - Performancerequirements

DC supplied electronic ballasts for tubularfluorescent lamps - Performance requirements

Auxiliaries for lamps - Starting devices (other thanglow starters) - Performance requirements

AC-supplied electronic ballasts for tubularfluorescent lamps - Performance requirements

Circuit-breakers for equipment (CBE)

Passive filter units for electromagnetic interferencesuppression Part 1: Generic specification

Title

SANS 60884-2-3:2007/IEC 60884-2-3:2006, IDT, Ed.2

SANS 60884-2-4:2008/IEC 60884-2-4:2007, IDT, Ed.3

SANS 60884-2-5:1995/IEC 60884-2-5:1995, IDT, Ed.1

SANS 60884-2-6:1997/IEC 60884-2-6:1997, IDT, Ed.1

SANS 60890:2007/IEC 60890:1987, IDT, Ed. 1

SANS 60896-11:2003/IEC 60896-11:2002, IDT, Ed. 1

SANS 60896-21:2004/IEC 60896-21:2004, IDT, Ed. 1

SANS 60896-22:2004/IEC 60896-22:2004, IDT, Ed. 1

SANS 60900:2006/IEC 60900:2004, IDT, Ed. 2

SANS 60901:2008/IEC 60901:2008, IDT, Ed. 2.4

SANS 60903:2005/IEC 60903:2002, IDT, Ed. 2

SANS 60906-3:1994/IEC 60906-3:1994, IDT, Ed. 1

SANS 60921:2006/IEC 60921:2006, IDT, Ed. 2.1

SANS 60923:2007/IEC 60923:2006, IDT, Ed. 3.1

SANS 60925:2001/IEC 60925:2001, IDT, Ed. 1.2

SANS 60927:2007/IEC 60927:2007, IDT, Ed. 3

SANS 60929:2006/IEC 60929:2006, IDT, Ed. 3

SANS 60934:2007/IEC 60934:2007, IDT, Ed. 3.1

SANS 60939-1:2007/IEC 60939-1:2005, IDT, Ed. 2

SANS Number

(SABS IEC 60884-2-3)

(SABS IEC 60884-2-4)

(SABS IEC 60884-2-5)

(SABS IEC 60884-2-6)

(SABS IEC 60901)

(SABS IEC 60903)

(SABS IEC 60906-3)

(SABS IEC 60921)

(SABS IEC 60923)

(SABS IEC 60925)

(SABS IEC 60927)

(SABS IEC 60929)

(SABS IEC 60934)

(SABS IEC 60939-1)


October 2009

2

5

4

3

2.01

2.02

1.01

3

3

1.01

2

1.01

1

1

1

1

2

Edition

Electroacoustics - Sound calibrators

Low-voltage switchgear and controlgear Part 1:General rules

Low-voltage switchgear and controlgear Part 2:Circuit-breakers

Low-voltage switchgear and controlgear Part 3:Switches, disconnectors, switch-disconnectors andfuse-combination units

Low-voltage switchgear and controlgear Part 4-1:Contactors and motor-starters - Electromechanicalcontactors and motor-starters

Low-voltage switchgear and controlgear Part 4-2:Contactors and motor-starters - AC semiconductormotor controllers and starters

Low-voltage switchgear and controlgear Part 4-3:Contactors and motor-starters - A.C. semiconductorcontrollers and contactors for non-motor loads

Low-voltage switchgear and controlgear Part 5-1:Control circuit devices and switching elements -Electromechanical control circuit devices

Low-voltage switchgear and controlgear Part 5-2:Control circuit devices and switching elements -Proximity switches

Low-voltage switchgear and controlgear Part 5-3:Control circuit devices and switching elements -Requirements for proximity devices with definedbehaviour under fault conditions (PDF)

Low-voltage switchgear and controlgear Part 5-4:Control circuit devices and switching elements -Method of assessing the performance of low-energycontacts - Special tests

Low-voltage switchgear and controlgear Part 5-5:Control circuit devices and switching elements -Electrical emergency stop device with mechanicallatching function

Low-voltage switchgear and controlgear Part 5-6:Control circuit devices and switching elements - DCinterface for proximity sensors and switchingamplifiers (NAMUR)

Low-voltage switchgear and controlgear Part 5-7:Control circuit devices and switching elements -Requirements for proximity devices with analogueoutput

Low-voltage switchgear and controlgear Part 5-8:Control circuit devices and switching elements -Three position enabling switches

Low-voltage switchgear and controlgear Part 5-9:Control circuit devices and switching elements -Flow rate switches

Low-voltage switchgear and controlgear Part 6-1:Multiple function equipment - Transfer switchingequipment

Title

SANS 60942:2003/IEC 60942:2003, IDT, Ed. 3

SANS 60947-1:2008/IEC 60947-1:2007, IDT, Ed. 5

SANS 60947-2:2007/IEC 60947-2:2006, IDT, Ed. 4

SANS 60947-3:2009/IEC 60947-3:2008, IDT, Ed. 3

SANS 60947-4-1:2004/IEC 60947-4-1:2002, IDT, Ed.2.1

SANS 60947-4-2:2007/IEC 60947-4-2:2007, IDT, Ed.2.2

SANS 60947-4-3:2007/IEC 60947-4-3:2007, IDT, Ed.1.1

SANS 60947-5-1:2005/IEC 60947-5-1:2003, IDT, Ed.3

SANS 60947-5-2:2008/IEC 60947-5-2:2007, IDT, Ed.3

SANS 60947-5-3:2005/IEC 60947-5-3:2005, IDT, Ed.1.1

SANS 60947-5-4:2003/IEC 60947-5-4:2002, IDT, Ed.2

SANS 60947-5-5:2005/IEC 60947-5-5:2005, IDT, Ed.1.1

SANS 60947-5-6:1999/IEC 60947-5-6:1999, IDT, Ed.1

SANS 60947-5-7:2003/IEC 60947-5-7:2003, IDT, Ed.1

SANS 60947-5-8:2007/IEC 60947-5-8:2006, IDT, Ed.1

SANS 60947-5-9:2007/IEC 60947-5-9:2006, IDT, Ed.1

SANS 60947-6-1:2006/IEC 60947-6-1:2005, IDT, Ed.2

SANS Number

(SABS IEC 60942)

(SABS IEC 60947-1)

(SABS IEC 60947-3)

(SABS IEC 60947-4-1)

(SABS IEC 60947-4-2)

(SABS IEC 60947-4-3)

(SABS IEC 60947-5-1)

(SABS IEC 60947-5-2)

(SABS IEC 60947-5-3)

(SABS IEC 60947-5-4)

(SABS IEC 60947-5-5)

(SABS IEC 60947-5-6)

(SABS IEC 60947-6-1)


October 2009

2.01

3

3

2

1.01

1

1.02

1.01

1

1

1

1

2

2

2

1

1

1

Edition

Low-voltage switchgear and controlgear Part 6-2:Multiple function equipment - Control and protectiveswitching devices (or equipment) (CPS)

Low-voltage switchgear and controlgear Part 7-1:Ancillary equipment - Terminal blocks for copperconductors

Low-voltage switchgear and controlgear Part 7-2:Ancillary equipment - Protective conductor terminalblocks for copper conductors

Low-voltage switchgear and controlgear Part 7-3:Ancillary equipment - Safety requirements for fuseterminal blocks

Low-voltage switchgear and controlgear Part 8:Control units for built-in thermal protection (PTC) forrotating electrical machines

Information technology equipment - Safety Part 1:General requirements

Self-ballasted lamps for general lighting services -Safety requirements

Arc welding equipment Part 1: Welding powersources

Arc welding equipment Part 2: Liquid coolingsystems

Arc welding equipment Part 3: Arc striking andstabilizing devices

Arc welding equipment Part 5: Wire feeders

Arc welding equipment Part 6: Limited duty manualmetal arc welding power sources

Arc welding equipment Part 7: Torches

Arc welding equipment Part 11: Electrode holders

Arc welding equipment Part 12: Coupling devices forwelding cables

Connecting devices for low-voltage circuits forhousehold and similar purposes Part 1: Generalrequirements

Connecting devices for low-voltage circuits forhousehold and similar purposes Part 2-1: Particularrequirements for connecting devices as separateentities with screw-type clamping units

Connecting devices for low-voltage circuits forhousehold and similar purposes Part 2-2: Particularrequirements for connecting devices as separateentities with screwless-type clamping units

Title

SANS 60947-6-2:2007/IEC 60947-6-2:2007, IDT, Ed.2.1

SANS 60947-7-1:2009/IEC 60947-7-1:2009, IDT, Ed.3

SANS 60947-7-2:2009/IEC 60947-7-2:2009, IDT, Ed.3

SANS 60947-7-3:2009/IEC 60947-7-3:2009, IDT, Ed.2

SANS 60947-8:2007/IEC 60947-8:2006, IDT, Ed. 1.1

SANS 60950-1:2003/IEC 60950-1:2001, IDT, Ed. 1

SANS 60968:2006/IEC 60968:1999, IDT, Ed. 1.2

SANS 60974-1:2003/IEC 60974-1:2000, IDT, Ed. 2.1

SANS 60974-2:2009/IEC 60974-2:2007, IDT, Ed. 2

SANS 60974-3:2009/IEC 60974-3:2007, IDT, Ed. 2

SANS 60974-5:2009/IEC 60974-5:2007, IDT, Ed. 2

SANS 60974-6:2009/IEC 60974-6:2003, IDT, Ed. 1

SANS 60974-7:2006/IEC 60974-7:2005, IDT, Ed. 2

SANS 60974-11:2005/IEC 60974-11:2004, IDT, Ed. 2

SANS 60974-12:2007/IEC 60974-12:2005, IDT, Ed. 2

SANS 60998-1:2006/IEC 60998-1:2002, IDT, Ed. 2

SANS 60998-2-1:2006/IEC 60998-2-1:2002, IDT, Ed.2

SANS 60998-2-2:2006/IEC 60998-2-2:2002, IDT, Ed.2

SANS Number

(SABS IEC 60947-6-2)

(SABS IEC 60947-7-1)

(SABS IEC 60947-7-2)

(SABS IEC 60974-1)

(SABS IEC 60974-7)

(SABS IEC 60974-11)

(SABS IEC 60974-12)


October 2009

1

1

1

2

1

1

1

2

1

1

1

1

1

1

1

Edition

Connecting devices for low-voltage circuits forhousehold and similar purposes Part 2-3: Particularrequirements for connecting devices as separateentities with insulation-piercing clamping units

Connecting devices for low-voltage circuits forhousehold and similar purposes Part 2-4: Particularrequirements for twist-on connecting devices

Electromagnetic compatibility (EMC) Part 1: GeneralSection 1: Application and interpretation offundamental definitions and terms

Electromagnetic compatibility (EMC) Part 1-2:General - Methodology for the achievement offunctional safety of electrical and electronic systemsincluding equipment with regard to electromagneticphenomena

Electromagnetic compatibility (EMC) Part 1-3:General - The effects of high-altitude EMP (HEMP)on civil equipment and systems

Electromagnetic compatibility (EMC) Part 1-5:General - High power electromagnetic (HPEM)effects on civil systems

Electromagnetic compatibility (EMC) Part 2:Environment Section 1: Description of theenvironment - Electromagnetic environment for low-frequency conducted disturbances and signalling inpublic power supply systems

Electromagnetic compatibility (EMC) Part 2-2:Environment - Compatibility levels for low-frequencyconducted disturbances and signalling in public low-voltage power supply systems

Electromagnetic compatibility (EMC) Part 2:Environment Section 3: Description of theenvironment - Radiated and non-network-frequency-related conducted phenomena

Electromagnetic compatibility (EMC) Part 2-4:Environment - Compatibility levels in industrialplants for low-frequency conducted disturbances

Electromagnetic compatibility (EMC) Part 2:Environment Section 5: Classification ofelectromagnetic environments - Basic EMCpublication

Electromagnetic compatibility (EMC) Part 2:Environment Section 6: Assessment of the emissionlevels in the power supply of industrial plants asregards low-frequency conducted disturbances

Electromagnetic compatibility (EMC) Part 2:Environment Section 7: Low frequency magneticfields in various environments

Electromagnetic compatibility (EMC) Part 2:Environment Section 9: Description of HEMPenvironment - Radiated disturbance - Basic EMCpublication

Electromagnetic compatibility (EMC) Part 2-10:Environment - Description of HEMP environment -Conducted disturbance

Title

SANS 60998-2-3:2006/IEC 60998-2-3:2002, IDT, Ed.2

SANS 60998-2-4:2006/IEC 60998-2-4:2004, IDT, Ed.2

SANS 61000-1-1:1992/IEC 61000-1-1:1992, IDT, Ed.1

SANS 61000-1-2:2009/IEC TS 61000-1-2:2008, IDT,Ed. 2

SANS 61000-1-3:2006/IEC/TR 61000-1-3:2002, IDT,Ed. 1

SANS 61000-1-5:2006/IEC 61000-1-5:2004, IDT, Ed.1

SANS 61000-2-1:2006/IEC 61000-2-1:1990, IDT, Ed.1

SANS 61000-2-2:2002/IEC 61000-2-2:2002, IDT, Ed.2

SANS 61000-2-3:2007/IEC 61000-2-3:1992, IDT, Ed.1

SANS 61000-2-4:2003/IEC 61000-2-4:2002, IDT, Ed.2

SANS 61000-2-5:1995/IEC 61000-2-5:1995, IDT, Ed.1

SANS 61000-2-6:1995/IEC 61000-2-6:1995, IDT, Ed.1

SANS 61000-2-7:1998/IEC 61000-2-7:1998, IDT, Ed.1

SANS 61000-2-9:2007/IEC 61000-2-9:1996, IDT, Ed.1

SANS 61000-2-10:2007/IEC 61000-2-10:1998, IDT,Ed. 1

SANS Number

(SABS IEC 61000-1-1)

(SABS IEC 61000-2-2)

(SABS IEC 61000-2-5)

(SABS IEC 61000-2-6)

(SABS IEC 61000-2-7)


October 2009

1

1

1

3.02

2

1

2

1

3

2

3.01

2

2

3

2

Edition

Electromagnetic compatibility (EMC) Part 2-11:Environment - Classification of HEMP environments

Electromagnetic compatibility (EMC) Part 2-12:Environment - Compatibility levels for low-frequencyconducted disturbances and signalling in publicmedium-voltage power supply systems

Electromagnetic compatibility (EMC) Part 2-13:Environment - High-power electromagnetic (HPEM)environments - Radiated and conducted

Electromagnetic compatibility (EMC) Part 3-2: Limits- Limits for harmonic current emissions (equipmentinput current <= 16 A per phase)

Electromagnetic compatibility (EMC) Part 3-3: Limits- Limitation of voltage changes, voltage fluctuationsand flicker in public low-voltage supply systems, forequipment with rated current <= 16 A per phase andnot subject to conditional connection

Electromagnetic compatibility (EMC) Part 3-4: Limits- Limitation of emission of harmonic currents in low-voltage power supply systems for equipment withrated current greater than 16 A

Electromagnetic compatibility (EMC) Part 3-5: Limits- Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment withrated current greater than 75 A

Electromagnetic compatibility (EMC) Part 3-11:Limits - Limitation of voltage changes, voltagefluctuations and flicker in public low-voltage supplysystems - Equipment with rated current <= 75 A andsubject to conditional connection

Electromagnetic compatibility (EMC) Part 4-1:Testing and measurement techniques - Overview ofIEC 61000-4 series

Electromagnetic compatibility (EMC) Part 4-2:Testing and measurement techniques - Electrostaticdischarge immunity test

Electromagnetic compatibility (EMC) Part 4-3:Testing and measurement techniques - Radiated,radio-frequency, electromagnetic field immunity test

Electromagnetic compatibility (EMC) Part 4-4:Testing and measurement techniques - Electricalfast transient/burst immunity test

Electromagnetic compatibility (EMC) Part 4-5:Testing and measurement techniques - Surgeimmunity test

Electromagnetic compatibility (EMC) Part 4-6:Testing and measurement techniques - Immunity toconducted disturbances, induced by radio-frequencyfields

Electromagnetic compatibility (EMC) Part 4-7:Testing and measurement techniques - Generalguide on harmonics and interharmonicsmeasurements and instrumentation, for powersupply systems and equipment connected thereto

Title

SANS 61000-2-11:2006/IEC 61000-2-11:1999, IDT,Ed. 1

SANS 61000-2-12:2005/IEC 61000-2-12:2003, IDT,Ed. 1

SANS 61000-2-13:2007/IEC 61000-2-13:2005, IDT,Ed. 1

SANS 61000-3-2:2009/IEC 61000-3-2:2009, IDT, Ed.3.2

SANS 61000-3-3:2009/IEC 61000-3-3:2008, IDT, Ed.2

SANS 61000-3-4:1998/IEC 61000-3-4:1998, IDT, Ed.1

SANS 61000-3-5:2009/IEC/TS 61000-3-5:2009, IDT,Ed. 2

SANS 61000-3-11:2003/IEC 61000-3-11:2000, IDT,Ed. 1

SANS 61000-4-1:2007/IEC 61000-4-1:2006, IDT, Ed.3

SANS 61000-4-2:2009/IEC 61000-4-2:2008, IDT, Ed.2

SANS 61000-4-3:2008/IEC 61000-4-3:2008, IDT, Ed.3.1

SANS 61000-4-4:2004/IEC 61000-4-4:2004, IDT, Ed.2

SANS 61000-4-5:2006/IEC 61000-4-5:2005, IDT, Ed.2

SANS 61000-4-6:2009/IEC 61000-4-6:2008, IDT, Ed.3

SANS 61000-4-7:2003/IEC 61000-4-7:2002, IDT, Ed.2

SANS Number

(SABS IEC 61000-3-2)

(SABS IEC 61000-3-3)

(SABS IEC 61000-3-4)

(SABS IEC 61000-4-1)

(SABS IEC 61000-4-2)

(SABS IEC 61000-4-3)

(SABS IEC 61000-4-4)

(SABS IEC 61000-4-5)

(SABS IEC 61000-4-6)

(SABS IEC 61000-4-7)


October 2009

1.01

1.01

1.01

1

2

1.01

1.02

1.01

1.02

1.01

1

1

1.01

1.02

1

Edition

Electromagnetic compatibility (EMC) Part 4-8:Testing and measurement techniques - Powerfrequency magnetic field immunity test

Electromagnetic compatibility (EMC) Part 4-9:Testing and measurement techniques - Pulsemagnetic field immunity test

Electromagnetic compatibility (EMC) Part 4-10:Testing and measurement techniques - Dampedoscillatory magnetic field immunity test

Electromagnetic compatibility (EMC) Part 4-11:Testing and measurement techniques - Voltagedips, short interruptions and voltage variationsimmunity tests

Electromagnetic compatibility (EMC) Part 4-12:Testing and measurement techniques - Ring waveimmunity test

Electromagnetic compatibility (EMC) Part 4-13:Testing and measurement techniques - Harmonicsand interharmonics including mains signalling at a.c.power port, low frequency immunity tests

Electromagnetic compatibility (EMC) Part 4-14:Testing and measurement techniques - Voltagefluctuation immunity test for equipment with inputcurrent not exceeding 16 A per phase

Electromagnetic compatibility (EMC) Part 4-16:Testing and measurement techniques - Test forimmunity to conducted, common mode disturbancesin the frequency range 0 Hz to 150 kHz

Electromagnetic compatibility (EMC) Part 4-17:Testing and measurement techniques - Ripple ond.c. input power port immunity test

Electromagnetic compatibility (EMC) Part 4-20:Testing and measurement techniques - Emissionand immunity testing in transverse electromagnetic(TEM) waveguides

Electromagnetic compatibility (EMC) Part 4: Testingand measurement techniques Section 24: Testmethods for protective devices for HEMP conducteddisturbance - Basic EMC publication

Electromagnetic compatibility (EMC) Part 4-25:Testing and measurement techniques - HEMPimmunity test methods for equipment and systems

Electromagnetic compatibility (EMC) Part 4-27:Testing and measurement techniques - Unbalance,immunity test for equipment with input current notexceeding 16 A per phase

Electromagnetic compatibility (EMC) Part 4-28:Testing and measurement techniques - Variation ofpower frequency, immunity test for equipment withinput current not exceeding 16 A per phase

Electromagnetic compatibility (EMC) Part 4-29:Testing and measurement techniques - Voltagedips, short interruptions and voltage variations ond.c. input power port immunity tests

Title

SANS 61000-4-8:2003/IEC 61000-4-8:2001, IDT, Ed.1.1

SANS 61000-4-9:2003/IEC 61000-4-9:2001, IDT, Ed.1.1

SANS 61000-4-10:2003/IEC 61000-4-10:2001, IDT,Ed. 1.1

SANS 61000-4-11:2005/IEC 61000-4-11:2004, IDT,Ed. 1

SANS 61000-4-12:2007/IEC 61000-4-12:2006, IDT,Ed. 2

SANS 61000-4-13:2009/IEC 61000-4-13:2009, IDT,Ed. 1.1

SANS 61000-4-14:2009/IEC 61000-4-14:2009, IDT,Ed. 1.2

SANS 61000-4-16:2005/IEC 61000-4-16:2002, IDT,Ed. 1.1

SANS 61000-4-17:2009/IEC 61000-4-17:2009, IDT,Ed. 1.2

SANS 61000-4-20:2007/IEC 61000-4-20:2007, IDT,Ed. 1.1

SANS 61000-4-24:2006/IEC 61000-4-24:1997, IDT,Ed. 1

SANS 61000-4-25:2006/IEC 61000-4-25:2001, IDT,Ed. 1

SANS 61000-4-27:2009/IEC 61000-4-27:2009, IDT,Ed. 1.1

SANS 61000-4-28:2009/IEC 61000-4-28:2009, IDT,Ed. 1.2

SANS 61000-4-29:2005/IEC 61000-4-29:2000, IDT,Ed. 1

SANS Number

(SABS IEC 61000-4-12)

(SABS IEC 61000-4-17)


October 2009

2

1

1

1

1

1

1

2

1

2

2

1

2.02

1

2

2

Edition

Electromagnetic compatibility (EMC) Part 4-30:Testing and measurement techniques - Powerquality measurement methods

Electromagnetic compatibility (EMC) Part 5:Installation and mitigation guidelines Section 1:General considerations - Basic EMC publication

Electromagnetic compatibility (EMC) Part 5:Installation and mitigation guidelines Section 2:Earthing and cabling

Electromagnetic compatibility (EMC) Part 5-3:Installation and mitigation guidelines - HEMPprotection concepts

Electromagnetic compatibility (EMC) Part 5:Installation and mitigation guidelines Section 4:Immunity to HEMP - Specifications for protectivedevices against HEMP radiated disturbance - BasicEMC publication

Electromagnetic compatibility (EMC) Part 5:Installation and mitigation guidelines Section 5:Specification of protective devices for HEMPconducted disturbance - Basic EMC publication

Electromagnetic compatibility (EMC) Part 6-5:Generic standards - Immunity for power station andsubstation environments

Electromagnetic compatibility (EMC) Part 6-1:Generic standards - Immunity for residential,commercial and light-industrial environments

Electromagnetic compatibility (EMC) Part 6-2:Generic standards - Immunity for industrialenvironments

Electromagnetic compatibility (EMC) Part 6-3:Generic standards - Emission standard forresidential, commercial and light-industrialenvironments

Electromagnetic compatibility (EMC) Part 6-4:Generic standards - Emission standard for industrialenvironments

Electromagnetic compatibility (EMC) Part 6-6:Generic standards - HEMP immunity for indoorequipment

Residual current operated circuit-breakers withoutintegral overcurrent protection for household andsimilar uses (RCCBs) Part 1: General rules

Safety requirements for electrical equipment formeasurement, control and laboratory use Part 031:Safety requirements for hand-held probe assembliesfor electrical measurement and test

Safety requirements for electrical equipment formeasurement, control, and laboratory use Part 1:General requirements

Safety requirements for electrical equipment formeasurement, control and laboratory use Part 2-010: Particular requirements for laboratoryequipment for the heating of materials

Title

SANS 61000-4-30:2009/IEC 61000-4-30:2008, IDT,Ed. 2

SANS 61000-5-1:2006/IEC 61000-5-1:1996, IDT, Ed.1

SANS 61000-5-2:1997/IEC 61000-5-2:1997, IDT, Ed.1

SANS 61000-5-3:2008/IEC TR 61000-5-3:1999, IDT,Ed. 1

SANS 61000-5-4:2008/IEC/TR 61000-5-4:1996, IDT,Ed. 1

SANS 61000-5-5:2008/IEC 61000-5-5:1996, IDT, Ed.1

SANS 61000-6-5:2009/IEC TS 61000-6-5:2001, IDT,Ed. 1

SANS 61000-6-1:2005/IEC 61000-6-1:2005, IDT, Ed.2

SANS 61000-6-2:2005/IEC 61000-6-2:2005, IDT, Ed.2

SANS 61000-6-3:2007/IEC 61000-6-3:2006, IDT, Ed.2

SANS 61000-6-4:2006/IEC 61000-6-4:2006, IDT, Ed.2

SANS 61000-6-6:2006/IEC 61000-6-6:2003, IDT, Ed.1

SANS 61008-1:2006/IEC 61008-1:2006, IDT, Ed. 2.2

SANS 61010-031:2003/IEC 61010-031:2002, IDT,Ed. 1

SANS 61010-1:2004/IEC 61010-1:2001, IDT, Ed. 2

SANS 61010-2-010:2007/IEC 61010-2-010:2005,IDT, Ed. 2

SANS Number

(SABS IEC 61000-5-2)

(SABS IEC 61000-6-1)

(SABS CISPR/IEC 61000-6-3)

(SABS IEC 61008-1)

(SABS IEC 61010-1)

(SABS IEC 61010-2-010)


October 2009

2

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Safety requirements for electrical equipment formeasurement, control and laboratory use Part 2-020: Particular requirements for laboratorycentrifuges

Safety requirements for electrical equipment formeasurement, control, and laboratory use Part 2-031: Particular requirements for hand-held probeassemblies for electrical measurement and test

Safety requirements for electrical equipment formeasurement, control, and laboratory use Part 2-032: Particular requirements for hand-held andhand-manipulated current sensors for electrical testand measurement

Safety requirements for electrical equipment formeasurement, control and laboratory use Part 2-081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis andother purposes

Safety requirements for electrical equipment formeasurement, control and laboratory use Part 2-101: Particular requirements for in vitro diagnostic(IVD) medical equipment

Safety of transportable motor-operated electric toolsPart 1: General requirements

Safety of transportable motor-operated electric toolsPart 2-1: Particular requirements for circular saws

Safety of transportable motor-operated electric toolsPart 2-2: Particular requirements for radial arm saws

Safety of transportable motor-operated electric toolsPart 2-3: Particular requirements for planers andthicknessers

Safety of transportable motor-operated electric toolsPart 2-4: Particular requirements for bench grinders

Safety of transportable motor-operated electric toolsPart 2-5: Particular requirements for band saws

Safety of transportable motor-operated electric toolsPart 2-6: Particular requirements for diamond drillswith water supply

Safety of transportable motor-operated electric toolsPart 2-7: Particular requirements for diamond sawswith water supply

Safety of transportable motor-operated electric toolsPart 2-8: Particular requirements for single spindlevertical moulders

Safety of transportable motor-operated electric toolsPart 2: Particular requirements for mitre saws

Safety of transportable motor-operated electric toolsPart 2-10: Particular requirements for cutting-offgrinders

Title

SANS 61010-2-020:2007/IEC 61010-2-020:2006,IDT, Ed. 2

SANS 61010-2-031:1993/IEC 61010-2-031:1993, IDT

SANS 61010-2-032:2003/IEC 61010-2-032:2002,IDT, Ed. 2

SANS 61010-2-081:2005/IEC 61010-2-081:2001,IDT, Ed. 1

SANS 61010-2-101:2003/IEC 61010-2-101:2002,IDT, Ed. 1

SANS 61029-1:1990/IEC 61029-1:1990, IDT, Ed. 1

SANS 61029-2-1:1993/IEC 61029-2-1:1993, IDT, Ed.1

SANS 61029-2-2:1993/IEC 61029-2-2:1993, IDT, Ed.1

SANS 61029-2-3:1993/IEC 61029-2-3:1993, IDT, Ed.1

SANS 61029-2-4:1993/IEC 61029-2-4:1993, IDT, Ed.1

SANS 61029-2-5:1993/IEC 61029-2-5:1993, IDT, Ed.1

SANS 61029-2-6:1993/IEC 61029-2-6:1993, IDT, Ed.1

SANS 61029-2-7:1993/IEC 61029-2-7:1993, IDT, Ed.1

SANS 61029-2-8:1995/IEC 61029-2-8:1995, IDT, Ed.1

SANS 61029-2-9:1995/IEC 61029-2-9:1995, IDT, Ed.1

SANS 61029-2-10:1998/IEC 61029-2-10:1998, IDT,Ed. 1

SANS Number

(SABS IEC 61010-2-020)

(SABS IEC 61010-2-031)

(SABS IEC 61029-1)

(SABS IEC 61029-2-1)

(SABS IEC 61029-2-2)

(SABS IEC 61029-2-3)

(SABS IEC 61029-2-4)

(SABS IEC 61029-2-5)

(SABS IEC 61029-2-6)

(SABS IEC 61029-2-7)

(SABS IEC 61029-2-8)

(SABS IEC 61029-2-9)

(SABS IEC 61029-2-10)


October 2009

1

3

3

1

1

1

1

1

2

2

2

1

1

1

1

1

3.02

1

Edition

Safety of transportable motor-operated electric toolsPart 2-11: Particular requirements for mitre-benchsaws

Measurement of smoke density of cables burningunder defined conditions Part 1: Test apparatus

Measurement of smoke density of cables burningunder defined conditions Part 2: Test procedure andrequirements

Specification for conduit fittings for electricalinstallations Part 1: General requirements

Specification for conduit fittings for electricalinstallations Part 2: Particular specifications Section1: Metal conduit fittings

Specification for conduit fittings for electricalinstallations Part 2: Particular specifications Section2: Conduit fittings of insulating material

Specification for conduit fittings for electricalinstallations Part 2: Particular specifications Section3: Fittings for flexible conduits of metal, insulating orcomposite materials and for pliable conduits of metalor composite materials

Specification for conduit fittings for electricalinstallations Part 2: Particular specifications Section4: Conduit fittings of aluminium alloy

Opportunity charging of lead-acid traction batteries

DC or AC supplied electronic step-down convertorsfor filament lamps - Performance requirements

Auxiliaries for lamps - Capacitors for use in tubularfluorescent and other discharge lamp circuits -General and safety requirements

Capacitors for use in tubular fluorescent and otherdischarge lamp circuits - Performance requirements

General purpose lead-acid batteries (valve-regulatedtypes) Part 1: General requirements, functionalcharacteristics - Methods of test

General purpose lead-acid batteries (valve-regulatedtypes) Part 2: Dimensions, terminals and marking

Portable lead-acid cells and batteries (valve-regulated types) Part 3: Safety recommendations foruse in electric appliances

Aerial devices with insulating boom used for liveworking

Switches for appliances Part 1: Generalrequirements

Switches for appliances Part 2-1: Particularrequirements for cord switches

Title

SANS 61029-2-11:2004/IEC 61029-2-11:2001, IDT,Ed. 1

SANS 61034-1:2006/IEC 61034-1:2005, IDT, Ed. 3

SANS 61034-2:2006/IEC 61034-2:2005, IDT, Ed. 3

SANS 61035-1:1990/IEC 61035-1:1990, IDT, Ed. 1

SANS 61035-2-1:1993/IEC 61035-2-1:1993, IDT, Ed.1

SANS 61035-2-2:1993/IEC 61035-2-2:1993, IDT, Ed.1

SANS 61035-2-3:1993/IEC 61035-2-3:1993, IDT, Ed.1

SANS 61035-2-4:1995/IEC 61035-2-4:1995, IDT, Ed.1

SANS 61044:2004/IEC TR 61044:2002, IDT, Ed. 2

SANS 61047:2005/IEC 61047:2004, IDT, Ed. 2

SANS 61048:2006/IEC 61048:2006, IDT, Ed. 2

SANS 61049:1991/IEC 61049:1991, IDT, Ed. 1

SANS 61056-1:2003/IEC 61056-1:2002, IDT, Ed. 2

SANS 61056-2:2003/IEC 61056-2:2002, IDT, Ed. 2

SANS 61056-3:2003/IEC 61056-3:1991, IDT, Ed. 1

SANS 61057:2009/IEC 61057:1991, IDT, Ed. 1

SANS 61058-1:2009/IEC 61058-1:2008, IDT, Ed. 3.2

SANS 61058-2-1:1992/IEC 61058-2-1:1992, IDT, Ed.1

SANS Number

(SABS IEC 61034-1)

(SABS IEC 61034-2)

(SABS IEC 61035-1)

(SABS IEC 61035-2-1)

(SABS IEC 61035-2-2)

(SABS IEC 61035-2-3)

(SABS IEC 61035-2-4)

(SABS IEC 61044)

(SABS IEC 61047)

(SABS IEC 61048)

(SABS IEC 61049)

(SABS IEC 61058-1)

(SABS IEC 61058-2-1)


October 2009

1.01

1

2

1

1

1

1

1

1

1

1

1

2

1

1

2

2

Edition

Switches for appliances Part 2-4: Particularrequirements for independently mounted switches

Switches for appliances Part 2-5: Particularrequirements for change-over selectors

Fibre optic interconnecting devices and passivecomponents - Mechanical splices and fusion spliceprotectors for optical fibres and cables Part 1:Generic specification

Cable trunking and ducting systems for electricalinstallations Part 1: General requirements

Cable trunking and ducting systems for electricalinstallations Part 2: Particular requirements Section1: Cable trunking and ducting systems intended formounting on walls or ceilings

Cable trunking and ducting systems for electricalinstallations Part 2-2: Particular requirements -Cable trunking systems and cable ducting systemsintended for underfloor and flushfloor installations

Cable trunking and ducting systems for electricalinstallations Part 2: Particular requirements Section4: Service poles

Round wire concentric lay overhead electricalstranded conductors

Measurement microphones Part 1: Specifications forlaboratory standard microphones

Electroacoustics - Measurement microphones Part2: Primary method for pressure calibration oflaboratory standard microphones by the reciprocitytechnique

Measurement microphones Part 5: Methods forpressure calibration of working standardmicrophones by comparison

Measurement microphones Part 6: Electrostaticactuators for determination of frequency response

Insulators for overhead lines - Compositesuspension and tension insulators for a.c. systemswith a nominal voltage greater than 1 000 V -Definitions, test methods and acceptance criteria

A method for assessing the short-circuit withstandstrength of partially type-tested assemblies (PTTA)

Terminal markings for valve device stacks andassemblies and for power convertor equipment

Multicore and symmetrical pair/quad cables fordigital communications Part 1: General specification

Multicore and symmetrical pair/quad cables fordigital communications Part 2: Horizontal floor wiring- Sectional specification

Title

SANS 61058-2-4:2004/IEC 61058-2-4:2003, IDT, Ed.1.1

SANS 61058-2-5:1994/IEC 61058-2-5:1994, IDT, Ed.1

SANS 61073-1:2009/IEC 61073-1:2009, IDT, Ed. 4

SANS 61084-1:1991/IEC 61084-1:1991, IDT, Ed. 1

SANS 61084-2-1:1996/IEC 61084-2-1:1996, IDT, Ed.1

SANS 61084-2-2:2003/IEC 61084-2-2:2003, IDT, Ed.1

SANS 61084-2-4:1996/IEC 61084-2-4:1996, IDT, Ed.1

SANS 61089:1991/IEC 61089:1991, IDT, Ed. 1

SANS 61094-1:2009/IEC 61094-1:2000, IDT, Ed. 2

SANS 61094-2:2009/IEC 61094-2:2009, IDT, Ed. 2

SANS 61094-5:2009/IEC 61094-5:2001, IDT, Ed. 1

SANS 61094-6:2009/IEC 61094-6:2004, IDT, Ed. 1

SANS 61109:2008/IEC 61109:2008, IDT, Ed. 2

SANS 61117:2006/IEC 61117:1992, IDT, Ed. 1

SANS 61148:2005/IEC 61148:1992, IDT, Ed. 1

SANS 61156-1:2007/IEC 61156-1:2007, IDT, Ed. 3

SANS 61156-2:2007/IEC 61156-2:2003, IDT, Ed. 2

SANS Number

(SABS IEC 61058-2-4)

(SABS IEC 61058-2-5)

(SABS IEC 61073-1)

(SABS IEC 61084-1)

(SABS IEC 61084-2-1)

(SABS IEC 61084-2-4)

(SABS IEC 61089)

(SABS IEC 61109)


October 2009

3

3

2

2

1.01

1

1

1

2

2

2

1

1

1

1

1

1

1

1

Edition

Multicore and symmetrical pair/quad cables fordigital communications Part 3: Work area cable -Sectional specification

Bayonet lampholders

Double-capped fluorescent lamps - Safetyspecifications

Single-capped fluorescent lamps - Safetyspecifications

Low-voltage power supply devices, d.c. output -Performance characteristics

Low-voltage power supplies, d.c. output Part 3:Electromagnetic compatibility (EMC)

Low-voltage power supplies, d.c. output Part 6:Requirements for low-voltage power supplies ofassessed performance

Low-voltage power supplies, d.c. output Part 7:Safety requirements

Insulators of ceramic material or glass for overheadlines with a nominal voltage greater than 1 000 V -Impulse puncture testing in air

Live working - Portable equipment for earthing orearthing and short-circuiting

Compression and mechanical connectors for powercables for rated voltages up to 30 kV (Um = 36 kV)Part 1: Test methods and requirements

Electrical apparatus for use in the presence ofcombustible dust Part 0: General requirements

Electrical apparatus for use in the presence ofcombustible dust Part 1: Protection by enclosures"tD"

Electrical apparatus for use in the presence ofcombustible dust Part 2: Test methods Section 1:Methods for determining the minimum ignitiontemperatures of dust

Electrical apparatus for use in the presence ofcombustible dust Part 2: Test methods Section 2:Method for determining the electrical resistivity ofdust in layers

Electrical apparatus for use in the presence ofcombustible dust Part 2: Test methods Section 3:Method for determining minimum ignition energy ofdust/air mixtures

Electrical apparatus for use in the presence ofcombustible dust Part 4: Type of protection "pD"

Electrical apparatus for use in the presence ofcombustible dust Part 10: Classification of areaswhere combustible dusts are or may be present

Electrical apparatus for use in the presence ofcombustible dust Part 11: Protection by intrinsicsafety "iD"

Title

SANS 61156-3:2009/IEC 61156-3:2008, IDT, Ed. 3

SANS 61184:2009/IEC 61184:2008, IDT, Ed. 3

SANS 61195:1999/IEC 61195:1999, IDT, Ed. 2

SANS 61199:1999/IEC 61199:1999, IDT, Ed. 2

SANS 61204:2007/IEC 61204:2001, IDT, Ed. 1.1

SANS 61204-3:2000/IEC 61204-3:2000, IDT, Ed. 1

SANS 61204-6:2000/IEC 61204-6:2000, IDT, Ed. 1

SANS 61204-7:2008/IEC 61204-7:2006, IDT, Ed. 1

SANS 61211:2005/IEC 61211:2004, IDT, Ed. 2

SANS 61230:2009/IEC 61230:2008, IDT, Ed. 2

SANS 61238-1:2003/IEC 61238-1:2003, IDT, Ed. 2

SANS 61241-0:2005/IEC 61241-0:2004, IDT, Ed. 1

SANS 61241-1:2005/IEC 61241-1:2004, IDT, Ed. 1

SANS 61241-2-1:1994/IEC 61241-2-1:1994, IDT, Ed.1

SANS 61241-2-2:1993/IEC 61241-2-2:1993, IDT, Ed.1

SANS 61241-2-3:1994/IEC 61241-2-3:1994, IDT, Ed.1

SANS 61241-4:2001/IEC 61241-4:2001, IDT, Ed. 1

SANS 61241-10:2005/IEC 61241-10:2004, IDT, Ed. 1

SANS 61241-11:2007/IEC 61241-11:2005, IDT, Ed. 1

SANS Number

(SABS IEC 61184)

(SABS IEC 61195)

(SABS IEC 61199)

(SABS IEC 61204)

(SABS IEC 61204-3)

(SABS IEC 61204-6)

(SABS IEC 61211)

(SABS IEC 61230)

(SABS IEC 61238-1)

(SABS IEC 61241-2-1)

(SABS IEC 61241-2-2)

(SABS IEC 61241-2-3)

(SABS IEC 61241-4)


October 2009

1

1

1

2

1.02

1

1

1

1

2

1

1

2

1

1

2

2

1

Edition

Electrical apparatus for use in the presence ofcombustible dust Part 14: Selection and installation

Electrical apparatus for use in the presence ofcombustible dust Part 17: Inspection andmaintenance of electrical installations in hazardousareas (other than mines)

Electrical apparatus for use in the presence ofcombustible dust Part 18: Protection byencapsulation "mD"

Live working - Voltage detectors Part 1: Capacitivetype to be used for voltages exceeding 1 kV a.c.

Live working - Voltage detectors Part 2: Resistivetype to be used for voltages of 1 kV to 36 kV a.c.

Live working - Voltage detectors Part 3: Two-polelow-voltage type

Live working - Voltage detectors Part 5: Voltagedetecting systems (VDS)

Fibre optic communication subsystem basic testprocedures Part 1-3: Test procedures for generalcommunication subsystems - Central wavelengthand spectral width measurement

Fibre optic communication subsystem basic testprocedures Part 2-1: Test procedures for digitalsystems - Receiver sensitivity and overloadmeasurement

Fibre optic communication subsystem testprocedures Part 2-2: Digital systems - Optical eyepattern, waveform and extinction ratio measurement

Fibre optic communication subsystems Part 1:Generic specification

Fibre optic communication system design guidesPart 1: Single-mode digital and analogue systems

Fibre optic communication system design guidesPart 3: Calculation of link polarization modedispersion

Fibre optic communication system design guidesPart 5: Accommodation and compensation ofdispersion

Overhead lines - Requirements and tests for fittings

Optical amplifiers - Test methods Part 3: Noisefigure parameters

Optical amplifiers - Test methods Part 5-1:Reflectance parameters - Optical spectrum analyzermethod

Optical amplifiers Part 1: Generic specification

Title

SANS 61241-14:2005/IEC 61241-14:2004, IDT, Ed. 1

SANS 61241-17:2006/IEC 61241-17:2005, IDT, Ed. 1

SANS 61241-18:2005/IEC 61241-18:2004, IDT, Ed. 1

SANS 61243-1:2007/IEC 61243-1:2003, IDT, Ed. 2

SANS 61243-2:2003/IEC 61243-2:2002, IDT, Ed. 1.2

SANS 61243-3:1998/IEC 61243-3:1998, IDT, Ed. 1

SANS 61243-5:1997/IEC 61243-5:1997, IDT, Ed. 1

SANS 61280-1-3:1998/IEC 61280-1-3:1998, IDT, Ed.1

SANS 61280-2-1:1998/IEC 61280-2-1:1998, IDT, Ed.1

SANS 61280-2-2:2006/IEC 61280-2-2:2005, IDT, Ed.2

SANS 61281-1:1999/IEC 61281-1:1999, IDT, Ed. 1

SANS 61282-1:2000/IEC/TR 61282-1:2000, IDT, Ed.1

SANS 61282-3:2007/IEC TR 61282-3:2006, IDT, Ed.2

SANS 61282-5:2003/IEC/TR 61282-5:2002, IDT, Ed.1

SANS 61284:1997/IEC 61284:1997, IDT, Ed. 2

SANS 61290-3:2009/IEC 61290-3:2008, IDT, Ed. 2

SANS 61290-5-1:2007/IEC 61290-5-1:2006, IDT, Ed.2

SANS 61291-1:2007/IEC 61291-1:2006, IDT, Ed. 2

SANS Number

(SABS IEC 61243-1)

(SABS IEC 61243-2)

(SABS IEC 61243-3)

(SABS IEC 61243-5)

(SABS IEC 61280-1-3)

(SABS IEC 61280-2-1)

(SABS IEC 61280-2-2)

(SABS IEC 61281-1)

(SABS IEC TR 61282-1)

(SABS IEC 61284)


October 2009

2

1

2

3

1

1

1

1

1

1

1

1

2

1.01

Edition

Optical amplifiers Part 2: Digital applications -Performance specification template

Fibre optic interconnecting devices and passivecomponents - Basic test and measurementprocedures Part 2-40: Tests - Screen testing ofattenuation of single-mode tuned angled opticalconnectors

Fibre optic interconnecting devices and passivecomponents - Basic test and measurementprocedures Part 3-6: Examinations andmeasurements - Return loss

Fibre optic interconnecting devices and passivecomponents - Basic test and measurementprocedures Part 3-34: Examinations andmeasurements - Attenuation of random matedconnectors

Fibre optic interconnecting devices and passivecomponents - Basic test and measurementprocedures Part 3-39: Examinations andmeasurements - PC optical connector referenceplug selection

Protection against lightning electromagnetic impulsePart 3: Requirements of surge protective devices(SPDs)

Calibration of fibre-optic power meters

Electrical equipment for measurement, control andlaboratory use - EMC requirements

Electrical equipment for measurement, control andlaboratory use - EMC requirements Part 1: Generalrequirements

Electrical equipment for measurement, control andlaboratory use - EMC requirements Part 2-1:Particular requirements - Test configurations,operational conditions and performance criteria forsensitive test and measurement equipment for EMCunprotected applications

Electrical equipment for measurement, control andlaboratory use - EMC requirements Part 2-2:Particular requirements - Test configurations,operational conditions and performance criteria forportable test, measuring and monitoring equipmentused in low-voltage distribution systems

Electrical equipment for measurement, control andlaboratory use - EMC requirements Part 2-3:Particular requirements - Test configuration,operational conditions and performance criteria fortransducers with integrated or remote signalconditioning

Lamp controlgear Part 1: General and safetyrequirements

Lamp controlgear Part 2-1: Particular requirementsfor starting devices (other than glow starters)

Title

SANS 61291-2:2007/IEC 61291-2:2007, IDT, Ed. 2

SANS 61300-2-40:2000/IEC 61300-2-40:2000, IDT,Ed. 1

SANS 61300-3-6:2004/IEC 61300-3-6:2003, IDT, Ed.2

SANS 61300-3-34:2009/IEC 61300-3-34:2009, IDT,Ed. 3

SANS 61300-3-39:1997/IEC 61300-3-39:1997, IDT,Ed. 1

SANS 61312-3:2006/IEC TS 61312-3:2000, IDT, Ed.1

SANS 61315:2006/IEC 61315:2005, IDT, Ed. 2

SANS 61326:2003/IEC 61326:2002, IDT, Ed. 1

SANS 61326-1:2007/IEC 61326-1:2005, IDT, Ed. 1

SANS 61326-2-1:2009/IEC 61326-2-1:2005, IDT, Ed.1

SANS 61326-2-2:2009/IEC 61326-2-2:2005, IDT, Ed.1

SANS 61326-2-3:2009/IEC 61326-2-3:2006, IDT, Ed.1

SANS 61347-1:2007/IEC 61347-1:2007, IDT, Ed. 2

SANS 61347-2-1:2006/IEC 61347-2-1:2006, IDT, Ed.1.1

SANS Number

(SABS IEC 61291-2)

(SABS IEC 61300-2-40)

(SABS IEC 61300-3-6)

(SABS IEC 61300-3-34)

(SABS IEC 61300-3-39)

(SABS IEC 61347-1)

(SABS IEC 61347-2-1)


October 2009

1.02

1.01

1

1

1

2

1.01

1.01

1

1

1

1

1

1

2

1

1

1

Edition

Lamp controlgear Part 2-2: Particular requirementsfor d.c. or a.c. supplied electronic step-downconvertors for filament lamps

Lamp controlgear Part 2-3: Particular requirementsfor a.c. supplied electronic ballasts for fluorescentlamps

Lamp controlgear Part 2-4: Particular requirementsfor d.c supplied electronic ballasts for generallighting

Lamp controlgear Part 2-5: Particular requirementsfor d.c supplied electronic ballasts for publictransport lighting

Lamp controlgear Part 2-6: Particular requirementsfor d.c supplied electronic ballasts for aircraft lighting

Lamp controlgear Part 2-7: Particular requirementsfor d.c supplied electronic ballasts for emergencylighting

Lamp controlgear Part 2-8: Particular requirementsfor ballasts for fluorescent lamps

Lamp controlgear Part 2-9: Particular requirementsfor ballasts for discharge lamps (excludingfluorescent lamps)

Lamp controlgear Part 2-10: Particular requirementsfor electronic invertors and convertors for high-frequency operation of cold start tubular dischargelamps (neon tubes)

Lamp controlgear Part 2-11: Particular requirementsfor miscellaneous electronic circuits used withluminaires

Lamp controlgear Part 2-13: Particular requirementsfor d.c. or a.c. supplied electronic controlgear forLED modules

Acceptance inspection for direct connectedalternating current static watt-hour meters for activeenergy (classes 1 and 2)

Convertor transformers Part 1: Transformers forindustrial applications

Converter transformers Part 3: Application guide

Conduit systems for cable management Part 1:General requirements

Conduit systems for cable management Part 21:Particular requirements - Rigid conduit systems

Conduit systems for cable management Part 22:Particular requirements - Pliable conduit systems

Conduit systems for cable management Part 23:Particular requirements - Flexible conduit systems

Title

SANS 61347-2-2:2006/IEC 61347-2-2:2006, IDT, Ed.1.2

SANS 61347-2-3:2005/IEC 61347-2-3:2004, IDT, Ed.1.1

SANS 61347-2-4:2000/IEC 61347-2-4:2000, IDT, Ed.1

SANS 61347-2-5:2000/IEC 61347-2-5:2000, IDT, Ed.1

SANS 61347-2-6:2000/IEC 61347-2-6:2000, IDT, Ed.1

SANS 61347-2-7:2007/IEC 61347-2-7:2006, IDT, Ed.2

SANS 61347-2-8:2007/IEC 61347-2-8:2006, IDT, Ed.1.1

SANS 61347-2-9:2004/IEC 61347-2-9:2003, IDT, Ed.1.1

SANS 61347-2-10:2000/IEC 61347-2-10:2000, IDT,Ed. 1

SANS 61347-2-11:2001/IEC 61347-2-11:2001, IDT,Ed. 1

SANS 61347-2-13:2007/IEC 61347-2-13:2006, IDT,Ed. 1

SANS 61358:1996/IEC 61358:1996, IDT, Ed. 1

SANS 61378-1:1997/IEC 61378-1:1997, IDT, Ed. 1

SANS 61378-3:2007/IEC 61378-3:2006, IDT, Ed. 1

SANS 61386-1:2008/IEC 61386-1:2008, IDT, Ed. 2

SANS 61386-21:2003/IEC 61386-21:2002, IDT, Ed. 1

SANS 61386-22:2003/IEC 61386-22:2002, IDT, Ed. 1

SANS 61386-23:2003/IEC 61386-23:2002, IDT, Ed. 1

SANS Number

(SABS IEC 61347-2-2)

(SABS IEC 61347-2-3)

(SABS IEC 61347-2-4)

(SABS IEC 61347-2-5)

(SABS IEC 61347-2-6)

(SABS IEC 61347-2-7)

(SABS IEC 61347-2-8)

(SABS IEC 61347-2-9)

(SABS IEC 61347-2-10)

(SABS IEC 61347-2-11)

(SABS IEC 61358)

(SABS IEC 61378-1)

(SABS IEC 61386-1)


October 2009

1

2

1

1

1

1

1

2

2

1

2

1.02

1

1

1

1

1

1.01

Edition

Conduit systems for cable management Part 24:Particular requirements - Conduit systems buriedunderground

Secondary cells and batteries for photovoltaicenergy systems (PVES) - General requirements andmethods of test

Marking of secondary cells and batteries with theinternational recycling symbol ISO 7000-1135

Secondary cells and batteries - Test methods forchecking the performance of devices designed forreducing explosion hazards - Lead-acid starterbatteries

Possible safety and health hazards in the use ofalkaline secondary cells and batteries - Guide toequipment manufacturers and users

Low-voltage switchgear and controlgear assembliesPart 1: General rules

Low-voltage switchgear and controlgear assembliesPart 2: Power switchgear and controlgearassemblies

Test methods for accessories for power cables withrated voltages from 6 kV (Um = 7,2 kV) up to 30 kV(Um = 36 kV)

Composite hollow insulators - Pressurized andunpressurized insulators for use in electricalequipment with rated voltage greater than 1 000 V -Definitions, test methods, acceptance criteria anddesign recommendations

Composite string insulator units for overhead lineswith a nominal voltage greater than 1 000 V Part 1:Standard strength classes and end fittings

Insulators for overhead lines - Insulator strings andsets for lines with a nominal voltage greater than 1000 V - AC power arc tests

Live working - Portable phase comparators for useon voltages from 1 kV to 36 kV a.c.

Live working - Protective clothing against thethermal hazards of an electric arc Part 1-1: Testmethods - Method 1: Determination of the arc rating(ATPV or EBT50) of flame resistant materials forclothing

Mineral insulated thermocouple cables andthermocouples

Powertrack systems Part 1: General requirements

Powertrack systems Part 22: Particular requirementsfor powertrack systems intended for on floor orunder floor installation

Installation couplers intended for permanentconnection in fixed installations

Electrical accessories - Portable residual currentdevices without integral overcurrent protection forhousehold and similar use (PRCDs)

Title

SANS 61386-24:2005/IEC 61386-24:2004, IDT, Ed. 1

SANS 61427:2005/IEC 61427:2005, IDT, Ed. 2

SANS 61429:1995/IEC 61429:1995, IDT, Ed. 1

SANS 61430:1997/IEC 61430:1997, IDT, Ed. 1

SANS 61438:1996/IEC 61438:1996, IDT, Ed. 1

SANS 61439-1:2009/IEC 61439-1:2009, IDT, Ed. 1

SANS 61439-2:2009/IEC 61439-2:2009, IDT, Ed. 1

SANS 61442:2006/IEC 61442:2005, IDT, Ed. 2

SANS 61462:2007/IEC 61462:2007, IDT, Ed. 1

SANS 61466-1:1997/IEC 61466-1:1997, IDT, Ed. 1

SANS 61467:2009/IEC 61467:2008, IDT, Ed. 1

SANS 61481:2005/IEC 61481:2004, IDT, Ed. 1.2

SANS 61482-1-1:2009/IEC 61482-1-1:2009, IDT, Ed.1

SANS 61515:1995/IEC 61515:1995, IDT, Ed. 1

SANS 61534-1:2007/IEC 61534-1:2003, IDT, Ed. 1

SANS 61534-22:2009/IEC 61534-22:2009, IDT, Ed. 1

SANS 61535:2009/IEC 61535:2009, IDT, Ed. 1

SANS 61540:2007/IEC 61540:1999, IDT, Ed. 1.1

SANS Number

(SABS IEC 61427)

(SABS IEC 61429)

(SABS IEC 61430)

(SABS IEC 61438)

(SABS IEC 61442)

(SABS IEC 61462)

(SABS IEC 61466-1)

(SABS IEC 61467)

(SABS IEC 61481)

(SABS IEC 61515)


October 2009

1

1

1.01

2

2

2

1

2

1

2

2

1

1

1

2

Edition

Residual current-operated protective devices(RCDs) for household and similar use -Electromagnetic compatibility

Equipment for general lighting purposes - EMCimmunity requirements

Miscellaneous lamps

Safety of power transformers, power supplies,reactors and similar products Part 1: Generalrequirements and tests

Safety of power transformers, power supplies,reactors and similar products Part 2-1: Particularrequirements and tests for separating transformersand power supplies incorporating separatingtransformers for general applications

Safety of power transformers, power supplies,reactors and similar products Part 2-2: Particularrequirements and tests for control transformers andpower supplies incorporating control transformers

Safety of power transformers, power supply unitsand similar devices Part 2-3: Particular requirementsfor ignition transformers for gas and oil burners

Safety of transformers, reactors, power supply unitsand similar products for supply voltages up to 1 100V Part 2-4: Particular requirements and tests forisolating transformers and power supply unitsincorporating isolating transformers

Safety of power transformers, power supply unitsand similar Part 2-5: Particular requirements forshaver transformers and shaver supply units

Safety of transformers, reactors, power supply unitsand similar products for supply voltages up to 1 100V Part 2-6: Particular requirements and tests forsafety isolating transformers and power supply unitsincorporating safety isolating transformers

Safety of power transformers, power supplies,reactors and similar products Part 2-7: Particularrequirements and tests for transformers and powersupplies for toys

Safety of small power transformers, power supplyunits and similar Part 2-8: Particular requirementsfor bell and chime transformers

Safety of power transformers, power supply unitsand similar products Part 2-9: Particularrequirements for transformers for class IIIhandlamps for tungsten filament lamps

Safety of power transformers, power supply unitsand similar devices Part 2-12: Particularrequirements for constant voltage transformers

Safety of transformers, reactors, power supply unitsand similar products for supply voltages up to 1 100V Part 2-13: Particular requirements and tests forauto transformers and power supply unitsincorporating auto transformers

Title

SANS 61543:2007/IEC 61543:1995, IDT, Ed. 1

SANS 61547:1995/IEC 61547:1995, IDT, Ed. 1

SANS 61549:2005/IEC 61549:2005, IDT, Ed. 2.1

SANS 61558-1:2006/IEC 61558-1:2005, IDT, Ed. 2

SANS 61558-2-1:2007/IEC 61558-2-1:2007, IDT, Ed.2

SANS 61558-2-2:2007/IEC 61558-2-2:2007, IDT, Ed.2

SANS 61558-2-3:1999/IEC 61558-2-3:1999, IDT, Ed.1

SANS 61558-2-4:2009/IEC 61558-2-4:2009, IDT, Ed.2

SANS 61558-2-5:1997/IEC 61558-2-5:1997, IDT, Ed.1

SANS 61558-2-6:2009/IEC 61558-2-6:2009, IDT, Ed.2

SANS 61558-2-7:2007/IEC 61558-2-7:2007, IDT, Ed.2

SANS 61558-2-8:1998/IEC 61558-2-8:1998, IDT, Ed.1

SANS 61558-2-9:2003/IEC 61558-2-9:2002, IDT, Ed.1

SANS 61558-2-12:2001/IEC 61558-2-12:2001, IDT,Ed. 1

SANS 61558-2-13:2009/IEC 61558-2-13:2009, IDT,Ed. 2

SANS Number

(SABS IEC 61547)

(SABS IEC 61558-1)

(SABS IEC 61558-2-1)

(SABS IEC 61558-2-2)

(SABS IEC 61558-2-3)

(SABS IEC 61558-2-4)

(SABS IEC 61558-2-5)

(SABS IEC 61558-2-6)

(SABS IEC 61558-2-7)

(SABS IEC 61558-2-8)

(SABS IEC 61558-2-12)

(SABS IEC 61558-2-13)


October 2009

1

1

1

1

1

1

2

2

1.01

1

1

1

1

1

1

1

2

Edition

Safety of power transformers, power supply unitsand similar Part 2-15: Particular requirements forisolating transformers for the supply of medicallocations

Safety of power transformers, power supply unitsand similar Part 2-17: Particular requirements fortransformers for switch mode power supplies

Safety of power transformers, power supply unitsand similar devices Part 2-19: Particularrequirements for perturbation attenuationtransformers

Safety of power transformers, power supply unitsand similar devices Part 2-20: Particularrequirements for small reactors

Safety of power transformers, power supply unitsand similar devices Part 2-23: Particularrequirements for transformers for construction sites

Enclosed low-voltage switchgear and controlgearassemblies - Guide for testing under conditions ofarcing due to internal fault

Low-voltage surge protective devices Part 1: Surgeprotective devices connected to low-voltage powerdistribution systems - Requirements and tests

Low-voltage surge protective devices Part 12: Surgeprotective devices connected to low-voltage powerdistribution systems - Selection and applicationprinciples

Low voltage surge protective devices Part 21: Surgeprotective devices connected to telecommunicationsand signalling networks - Performance requirementsand testing methods

Low-voltage surge protective devices Part 22: Surgeprotective devices connected to telecommunicationsand signalling networks - Selection and applicationprinciples

Components for low-voltage surge protectivedevices Part 311: Specification for gas dischargetubes (GDT)

Components for low-voltage surge protectivedevices Part 321: Specification for avalanchebreakdown diode (ABD)

Components for low-voltage surge protectivedevices Part 341: Specification for thyristor surgesuppressors (TSS)

Electroacoustics - Sound level meters Part 1:Specifications

Electroacoustics - Sound level meters Part 2:Pattern evaluation tests

Electroacoustics - Sound level meters Part 3:Periodic tests

Calibration of fibre optic chromatic dispersion testsets

Title

SANS 61558-2-15:1999/IEC 61558-2-15:1999, IDT,Ed. 1

SANS 61558-2-17:1997/IEC 61558-2-17:1997, IDT,Ed. 1

SANS 61558-2-19:2000/IEC 61558-2-19:2000, IDT,Ed. 1

SANS 61558-2-20:2000/IEC 61558-2-20:2000, IDT,Ed. 1

SANS 61558-2-23:2000/IEC 61558-2-23:2000, IDT,Ed. 1

SANS 61641:2008/IEC/TR 61641:2008, IDT, Ed. 2

SANS 61643-1:2006/IEC 61643-1:2005, IDT, Ed. 2

SANS 61643-12:2009/IEC 61643-12:2008, IDT, Ed. 2

SANS 61643-21:2009/IEC 61643-21:2009, IDT, Ed.1.1

SANS 61643-22:2005/IEC 61643-22:2004, IDT, Ed. 1

SANS 61643-311:2004/IEC 61643-311:2001, IDT,Ed. 1

SANS 61643-321:2004/IEC 61643-321:2001, IDT,Ed. 1

SANS 61643-341:2004/IEC 61643-341:2001, IDT,Ed. 1

SANS 61672-1:2003/IEC 61672-1:2002, IDT, Ed. 1

SANS 61672-2:2003/IEC 61672-2:2003, IDT, Ed. 1

SANS 61672-3:2007/IEC 61672-3:2006, IDT, Ed. 1

SANS 61744:2006/IEC 61744:2005, IDT, Ed. 2

SANS Number

(SABS IEC 61558-2-15)

(SABS IEC 61558-2-17)

(SABS IEC 61558-2-19)

(SABS IEC 61558-2-20)

(SABS IEC 61558-2-23)

(SABS IEC 61643-1)


October 2009

2

1

1.02

2

1

1

1.01

1

1

1

2

1

2

1

1

1

1

Edition

Calibration of optical time-domain reflectometers(OTDR)

Fibre optic interconnecting devices and passivecomponents performance standard Part 2-1: Fibreoptic connectors terminated on single-mode fibre forcategory U - Uncontrolled environment

Fibre optic connector interfaces Part 4: Type SCconnector family

Fibre optic connector interfaces Part 13: Type FC-PC connector

Fibre optic connector interfaces Part 18: Type MT-RJ connector family

Fibre optic connector interfaces Part 20: Type LCconnector family

Electric appliances connected to the water mains -Avoidance of backsiphonage and failure of hose-sets

Electrical apparatus for the detection andmeasurement of flammable gases Part 6: Guide forthe selection, installation, use and maintenance ofapparatus for the detection and measurement offlammable gases

Adjustable speed electrical power drive systemsPart 1: General requirements - Rating specificationsfor low voltage adjustable speed d.c. power drivesystems

Adjustable speed electrical power drive systemsPart 2: General requirements - Rating specificationsfor low voltage adjustable frequency a.c. power drivesystems

Adjustable speed electrical power drive systemsPart 3: EMC requirements and specific test methods

Adjustable speed electrical power drive systemsPart 4: General requirements - Rating specificationsfor a.c. power drive systems above 1 000 V a.c. andnot exceeding 35 kV

Adjustable speed electrical power drive systemsPart 5-1: Safety requirements - Electrical, thermaland energy

Adjustable speed electrical power drive systemsPart 5-2: Safety requirements - Functional

Adjustable speed electrical power drive systemsPart 6: Guide for determination of types of load dutyand corresponding current ratings

Adjustable speed electrical power drive systemsPart 7-1: Generic interface and use of profiles forpower drive systems - Interface definition

Adjustable speed electrical power drive systemsPart 7-201: Generic interface and use of profiles forpower drive systems - Profile type 1 specification

Title

SANS 61746:2005/IEC 61746:2005, IDT, Ed. 2

SANS 61753-2-1:2000/IEC 61753-2-1:2000, IDT, Ed.1

SANS 61754-4:2002/IEC 61754-4:2002, IDT, Ed. 1.2

SANS 61754-13:2006/IEC 61754-13:2006, IDT, Ed. 2

SANS 61754-18:2002/IEC 61754-18:2001, IDT, Ed. 1

SANS 61754-20:2002/IEC/PAS 61754-20:2001, IDT,Ed. 1

SANS 61770:2004/IEC 61770:2004, IDT, Ed. 1.1

SANS 61779-6:1999/IEC 61779-6:1999, IDT, Ed. 1

SANS 61800-1:1997/IEC 61800-1:1997, IDT, Ed. 1

SANS 61800-2:1998/IEC 61800-2:1998, IDT, Ed. 1

SANS 61800-3:2005/IEC 61800-3:2004, IDT, Ed. 2

SANS 61800-4:2005/IEC 61800-4:2002, IDT, Ed. 1

SANS 61800-5-1:2008/IEC 61800-5-1:2007, IDT, Ed.2

SANS 61800-5-2:2008/IEC 61800-5-2:2007, IDT, Ed.1

SANS 61800-6:2005/IEC/TR 61800-6:2003, IDT, Ed.1

SANS 61800-7-1:2008/IEC 61800-7-1:2007, IDT, Ed.1

SANS 61800-7-201:2008/IEC 61800-7-201:2007,IDT, Ed. 1

SANS Number

(SABS IEC 61753-2-1)

(SABS IEC 61754-4)

(SABS IEC 61754-13)

(SABS IEC 61779-6)

(SABS IEC 61800-1)

(SABS IEC 61800-2)

(SABS IEC 61800-3)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

2

1

1

1

1

Edition




Adjustable speed electrical power drive systemsPart 7-301: Generic interface and use of profiles forpower drive systems - Mapping of profile type 1 tonetwork technologies




Cable cleats for electrical installations

Fibre optic graphical symbology

Fibre optic - Terminology

Power installations exceeding 1 kV a.c. Part 1:Common rules

Saw tables for use as saw benches - Tables forhand-held circular saws with a maximum saw-bladediameter of 315 mm - Safety requirements

Insulators for overhead lines - Composite line postinsulators for A.C. systems with a nominal voltagegreater than 1 000 V - Definitions, test methods andacceptance criteria

High-voltage prefabricated switchgear andcontrolgear assemblies - Voltage presenceindicating systems

Secondary cells and batteries containing alkaline orother non-acid electrolytes - Mechanical tests forsealed portable secondary cells and batteries

Secondary cells and batteries containing alkaline orother non-acid electrolytes - Secondary lithium cellsand batteries for portable applications

Secondary batteries for the propulsion of electricroad vehicles Part 1: Test parameters

Title

SANS 61800-7-202:2008/IEC 61800-7-202:2007,IDT, Ed. 1

SANS 61800-7-203:2008/IEC 61800-7-203:2007,IDT, Ed. 1

SANS 61800-7-204:2008/IEC 61800-7-204:2007,IDT, Ed. 1

SANS 61800-7-301:2008/IEC 61800-7-301:2007,IDT, Ed. 1

SANS 61800-7-302:2008/IEC 61800-7-302:2007,IDT, Ed. 1

SANS 61800-7-303:2008/IEC 61800-7-303:2007,IDT, Ed. 1

SANS 61800-7-304:2008/IEC 61800-7-304:2007,IDT, Ed. 1

SANS 61914:2009/IEC 61914:2009, IDT, Ed. 1

SANS 61930:2004/IEC/TR 61930:1998, IDT, Ed. 1

SANS 61931:2004/IEC/TR 61931:1998, IDT, Ed. 1

SANS 61936-1:2008/IEC 61936-1:2002, IDT, Ed. 1

SANS 61939:2004/IEC 61939:2000, IDT, Ed. 1

SANS 61952:2008/IEC 61952:2008, IDT, Ed. 2

SANS 61958:2000/IEC 61958:2000, IDT, Ed. 1

SANS 61959:2005/IEC 61959:2004, IDT, Ed. 1

SANS 61960:2005/IEC 61960:2003, IDT, Ed. 1

SANS 61982-1:2008/IEC 61982-1:2006, IDT, Ed. 1

SANS Number

(SABS IEC 61958)


October 2009

1

1

1

1

1

1

1

1.01

1

2

1

1

1

1

1

1

1

1

1

Edition

Secondary batteries for the propulsion of electricroad vehicles Part 2: Dynamic dischargeperformance test and dynamic endurance test

Secondary batteries for the propulsion of electricroad vehicles Part 3: Performance and life testing(traffic compatible, urban use vehicles)

Devices for the connection of luminaires forhousehold and similar purposes Part 1: Generalrequirements

Reliability of fibre optic interconnecting devices andpassive components Part 1: Introductory guide anddefinitions

LED modules for general lighting - Safetyspecifications

Attenuation uniformity in optical fibres

Automatic test systems for battery poweredemergency escape lighting

Discharge lamps (excluding fluorescent lamps) -Safety specifications

Uninterruptible power systems (UPS) Part 1:General and safety requirements for UPS

Uninterruptible power systems (UPS) Part 2:Electromagnetic compatibility (EMC) requirements

Uninterruptible power systems (UPS) Part 3: Methodof specifying the performance and test requirements

Electricity metering - Glossary of terms

Electricity metering - Data exchange for meterreading, tariff and load control - Glossary of termsPart 1: Terms related to data exchange withmetering equipment using DLMS/COSEM

Electricity metering equipment (a.c.) - Generalrequirements, tests and test conditions Part 11:Metering equipment

Electricity metering equipment (a.c.) - Particularrequirements Part 11: Electromechanical meters foractive energy (classes 0,5, 1 and 2)

Electricity metering equipment (a.c.) - Particularrequirements Part 21: Static meters for activeenergy (classes 1 and 2)

Electricity metering equipment (a.c.) - Particularrequirements Part 22: Static meters for activeenergy (classes 0,2 S and 0,5 S)

Electricity metering equipment (a.c) - Particularrequirements Part 23: Static meters for reactiveenergy (classes 2 and 3)

Electricity metering equipment (AC) - Particularrequirements Part 52: Symbols

Title

SANS 61982-2:2003/IEC 61982-2:2002, IDT, Ed. 1

SANS 61982-3:2001/IEC 61982-3:2001, IDT, Ed. 1

SANS 61995-1:2006/IEC 61995-1:2005, IDT, Ed. 1

SANS 62005-1:2002/IEC 62005-1:2001, IDT, Ed. 1

SANS 62031:2008/IEC 62031:2008, IDT, Ed. 1

SANS 62033:2000/IEC/TS 62033:2000, IDT, Ed. 1

SANS 62034:2008/IEC 62034:2006, MOD, Ed. 1

SANS 62035:2003/IEC 62035:2003, IDT, Ed. 1.1

SANS 62040-1:2008/IEC 62040-1:2008, IDT, Ed. 1

SANS 62040-2:2007/IEC 62040-2:2005, IDT, Ed. 2

SANS 62040-3:1999/IEC 62040-3:1999, IDT, Ed. 1

SANS 62051:1999/IEC 62051:1999, IDT, Ed. 1

SANS 62051-1:2005/IEC TR 62051-1:2004, IDT, Ed.1

SANS 62052-11:2003/IEC 62052-11:2003, IDT, Ed. 1

SANS 62053-11:2003/IEC 62053-11:2003, IDT, Ed. 1

SANS 62053-21:2003/IEC 62053-21:2003, IDT, Ed. 1

SANS 62053-22:2003/IEC 62053-22:2003, IDT, Ed. 1

SANS 62053-23:2003/IEC 62053-23:2003, IDT, Ed. 1

SANS 62053-52:2006/IEC 62053-52:2005, IDT, Ed. 1

SANS Number

(SABS IEC 61982-3)

(SABS IEC TS 62033)

(SABS IEC 62035)

(SABS IEC 62040-2)

(SABS IEC 62040-3)

(SABS IEC 62051)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

2

1

1

1.01

1

1

1

Edition

Electricity metering - Payment systems Part 21:Framework for standardization

Electricity metering - Payment systems Part 31:Particular requirements - Static payment meters foractive energy (classes 1 and 2)

Electricity metering - Payment systems Part 41:Standard transfer specification (STS) - Applicationlayer protocol for one-way token carrier systems

Electricity metering - Payment systems Part 51:Standard transfer specification (STS) - Physicallayer protocol for one-way numeric and magneticcard token carriers

Electricity metering - Payment systems Part 52:Standard transfer specification (STS) - Physicallayer protocol for a two-way virtual token carrier fordirect local connection

Electricity metering - Data exchange for meterreading, tariff and load control Part 21: Direct localdata exchange

Secondary cells and batteries - Monitoring of leadacid stationary batteries - User guide

Guidance on the measurement of wettability ofinsulator surfaces

Electrical apparatus for explosive gas atmospheres -Electrical resistance trace heating Part 1: Generaland testing requirements

Electrical apparatus for explosive gas atmospheres -Electrical resistance trace heating Part 2:Application for design, installation and maintenance

Fibre optic wavelength switches - Genericspecification

Electronic equipment for use in power installations

Characteristics of DAB receivers

Digital audio broadcast system - Specification of thereceiver data interface (RDI)

Specification of the radio data system (RDS) forVHF/FM sound broadcasting in the frequency rangefrom 87,5 to 108,0 MHz

Electric toys - Safety

Calibration of optical spectrum analyzers

Secondary cells and batteries containing alkaline orother non-acid electrolytes - Safety requirements forportable sealed secondary cells, and for batteriesmade from them, for use in portable applications

Safety of equipment electrically connected to atelecommunication network

Title

SANS 62055-21:2006/IEC 62055-21:2005, IDT, Ed. 1

SANS 62055-31:2006/IEC 62055-31:2005, IDT, Ed. 1

SANS 62055-41:2007/IEC 62055-41:2007, IDT, Ed. 1

SANS 62055-51:2007/IEC 62055-51:2007, IDT, Ed. 1

SANS 62055-52:2009/IEC 62055-52:2008, IDT, Ed. 1

SANS 62056-21:2003/IEC 62056-21:2002, IDT, Ed. 1

SANS 62060:2002/IEC/TR 62060:2001, IDT, Ed. 1

SANS 62073:2006/IEC TS 62073:2003, IDT, Ed. 1

SANS 62086-1:2003/IEC 62086-1:2001, IDT, Ed. 1

SANS 62086-2:2003/IEC 62086-2:2001, IDT, Ed. 1

SANS 62099:2002/IEC 62099:2001, IDT, Ed. 1

SANS 62103:2005/IEC 62103:2003, IDT, Ed. 1

SANS 62104:2003/IEC 62104:2003, IDT, Ed. 2

SANS 62105:1999/IEC 62105:1999, IDT, Ed. 1

SANS 62106:2000/IEC 62106:2000, IDT, Ed. 1

SANS 62115:2005/IEC 62115:2004, IDT, Ed. 1.1

SANS 62129:2008/IEC 62129:2006, IDT, Ed. 1

SANS 62133:2005/IEC 62133:2002, IDT, Ed. 1

SANS 62151:2003/IEC 62151:2000, IDT, Ed. 1

SANS Number

(SABS IEC 62104)

(SABS IEC 62105)

(SABS IEC 62106)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

2

1

Edition

Hollow pressurized and unpressurized ceramic andglass insulators for use in electrical equipment withrated voltages greater than 1000 V

Live working - Telescopic sticks and telescopicmeasuring sticks

Empty enclosures for low-voltage switchgear andcontrolgear assemblies- General requirements

Human exposure to radio frequency fields fromhand-held and body-mounted wirelesscommunication devices - Human models,instrumentation, and procedures Part 1: Procedureto determine the specific absorption rate (SAR) forhand-held devices used in close proximity to the ear(frequency range of 300 MHz to 3 GHz)

Polymeric insulators for indoor and outdoor use witha nominal voltage >1000 V - General definitions, testmethods and acceptance criteria

Optical fibres - Measurement methods -Microbending sensitivity

Exposure to electric or magnetic fields in the low andintermediate frequency range - Methods forcalculating the current density and internal electricfield induced in the human body Part 1: General

Exposure to electric or magnetic fields in the low andintermediate frequency range - Methods forcalculating the current density and internal electricfield induced in the human body Part 2-1: Exposureto magnetic fields - 2D models

Electric cables - Spark-test method

Composite station post insulators for substationswith a.c. voltages greater than 1000 V up to 245 kV -Definitions, test methods and acceptance criteria

Measurement methods for electromagnetic fields ofhousehold appliances and similar apparatus withregard to human exposure

Secondary cells and batteries containing alkaline orother non-acid electrolytes - Nickel-cadmiumprismatic secondary single cells with partial gasrecombination

Degrees of protection provided by enclosures forelectrical equipment against external mechanicalimpacts (IK code)

High-voltage switchgear and controlgear Part 1:Common specifications

High-voltage switchgear and controlgear Part 3:Digital interfaces based on IEC 61850

High-voltage switchgear and controlgear Part 100:Alternating-current circuit-breakers

High-voltage switchgear and controlgear Part 101:Synthetic testing

Title

SANS 62155:2003/IEC 62155:2003, IDT, Ed. 1

SANS 62193:2006/IEC 62193:2003, IDT, Ed. 1

SANS 62208:2005/IEC 62208:2002, IDT, Ed. 1

SANS 62209-1:2006/IEC 62209-1:2005, IDT, Ed. 1

SANS 62217:2006/IEC 62217:2005, IDT, Ed. 1

SANS 62221:2002/IEC/TR 62221:2001, IDT, Ed. 1

SANS 62226-1:2006/IEC 62226-1:2004, IDT, Ed. 1

SANS 62226-2-1:2006/IEC 62226-2-1:2004, IDT, Ed.1

SANS 62230:2007/IEC 62230:2006, IDT, Ed. 1

SANS 62231:2006/IEC 62231:2006, IDT, Ed. 1

SANS 62233:2006/IEC 62233:2005, IDT, Ed. 1

SANS 62259:2005/IEC 62259:2003, IDT, Ed. 1

SANS 62262:2004/IEC 62262:2002, IDT, Ed. 1

SANS 62271-1:2008/IEC 62271-1:2007, IDT, Ed. 1

SANS 62271-3:2007/IEC 62271-3:2006, IDT, Ed. 1

SANS 62271-100:2009/IEC 62271-100:2008, IDT,Ed. 2

SANS 62271-101:2007/IEC 62271-101:2006, IDT,Ed. 1

SANS Number

(SABS IEC 62271-100)


October 2009

1

1

1

1

1

2

2

1

1

1

1

1

1

1

1

1

Edition

High-voltage switchgear and controlgear Part 102:Alternating current disconnectors and earthingswitches

High-voltage switchgear and controlgear Part 104:Alternating current switches for rated voltages of 52kV and above

High-voltage switchgear and controlgear Part 105:Alternating current switch-fuse combinations

High-voltage switchgear and controlgear Part 107:Alternating current fused circuit-switchers for ratedvoltages above 1 kV up to and including 52 kV

High-voltage switchgear and controlgear Part 108:High-voltage alternating current disconnectingcircuit-breakers for rated voltages of 72,5 kV andabove

High-voltage switchgear and controlgear Part 109:Alternating-current series capacitor by-passswitches

High-voltage switchgear and controlgear Part 110:Inductive load switching

High-voltage switchgear and controlgear Part 111:Overhead, pad-mounted, dry vault, and submersibleautomatic circuit reclosers and fault interrupters foralternating current systems up to 38 kV

High-voltage switchgear and controlgear Part 200:AC metal-enclosed switchgear and controlgear forrated voltages above 1 kV and up to and including52 kV

High-voltage switchgear and controlgear Part 201:AC insulation-enclosed switchgear and controlgearfor rated voltages above 1kV and up to andincluding 52 kV

High-voltage switchgear and controlgear Part 202:High-voltage/low-voltage prefabricated substation

High-voltage switchgear and controlgear Part 203:Gas-insulated metal-enclosed switchgear for ratedvoltages above 52 kV

High-voltage switchgear and controlgear Part 205:Compact switchgear assemblies for rated voltagesabove 52 kV

High-voltage switchgear and controlgear Part 207:Seismic qualification for gas-insulated switchgearassemblies for rated voltages above 52 kV

High-voltage switchgear and controlgear Part 209:Cable connections for gas-insulated metal-enclosedswitchgear for rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled anddry-type cable-terminations

High-voltage switchgear and controlgear Part 300:Seismic qualification of alternating current circuit-breakers

Title

SANS 62271-102:2003/IEC 62271-102:2001, IDT,Ed. 1

SANS 62271-104:2009/IEC 62271-104:2009, IDT,Ed. 1

SANS 62271-105:2003/IEC 62271-105:2002, IDT,Ed. 1

SANS 62271-107:2006/IEC 62271-107:2005, IDT,Ed. 1

SANS 62271-108:2007/IEC 62271-108:2005, IDT,Ed. 1

SANS 62271-109:2009/IEC 62271-109:2008, IDT,Ed. 2

SANS 62271-110:2009/IEC 62271-110:2009, IDT,Ed. 2

SANS 62271-111:2007/IEC 62271-111:2005, IDT,Ed. 1

SANS 62271-200:2004/IEC 62271-200:2003, IDT,Ed. 1

SANS 62271-201:2007/IEC 62271-201:2006, IDT,Ed. 1

SANS 62271-202:2007/IEC 62271-202:2006, IDT,Ed. 1

SANS 62271-203:2004/IEC 62271-203:2003, IDT,Ed. 1

SANS 62271-205:2008/IEC 62271-205:2008, IDT,Ed. 1

SANS 62271-207:2007/IEC 62271-207:2007, IDT,Ed. 1

SANS 62271-209:2007/IEC 62271-209:2007, IDT,Ed. 1

SANS 62271-300:2007/IEC TR 62271-300:2006, IDT,Ed. 1

SANS Number


October 2009

1

1

1

2

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

High-voltage switchgear and controlgear Part 301:Dimensional standardisation of terminals

High-voltage switchgear and controlgear Part 304:Design classes for indoor enclosed switchgear andcontrolgear for rated voltages above 1 kV up to andincluding 52 kV to be used in severe climaticconditions

High-voltage switchgear and controlgear Part 308:Guide for asymmetrical short-circuit breaking testduty T100a

High-voltage switchgear and controlgear Part 310:Electrical endurance testing for circuit-breakersabove a rated voltage of 52 kV

Fuel cell technologies Part 3-3: Stationary fuel cellpower systems - Installation

Protection against lightning Part 1: Generalprinciples

Protection against lightning Part 2: Riskmanagement

Protection against lightning Part 3: Physical damageto structures and life hazard

Protection against lightning Part 4: Electrical andelectronic systems within structures

Static transfer systems (STS) Part 1: General andsafety requirements

Static transfer systems (STS) Part 2:Electromagnetic compatibility (EMC) requirements

Static transfer systems (STS) Part 3: Method forspecifying performance and test requirements

Assessment of electronic and electrical equipmentrelated to human exposure restrictions forelectromagnetic fields (0 Hz - 300 GHz)

Guidance for the interpretation of OTDRbackscattering traces

Circuit breakers - Switched protective earth portableresidual current devices for class I and batterypowered vehicle applications

Characteristics of hollow pressurised andunpressurised ceramic and glass insulators for usein electrical equipment with rated voltages greaterthan 1 000 V

DC or AC supplied electronic control gear for LEDmodules - Performance requirements

Household refrigerating appliances - Characteristicsand test methods

Title

SANS 62271-301:2005/IEC/TR 62271-301:2004, IDT,Ed. 1

SANS 62271-304:2008/IEC/TS 62271-304:2008, IDT,Ed. 1

SANS 62271-308:2007/IEC 62271-308:2002, IDT,Ed. 1

SANS 62271-310:2008/IEC/TR 62271-310:2008, IDT,Ed. 2

SANS 62282-3-3:2008/IEC 62282-3-3:2007, IDT, Ed.1

SANS 62305-1:2007/IEC 62305-1:2006, IDT, Ed. 1

SANS 62305-2:2007/IEC 62305-2:2006, IDT, Ed. 1

SANS 62305-3:2007/IEC 62305-3:2006, IDT, Ed. 1

SANS 62305-4:2007/IEC 62305-4:2006, IDT, Ed. 1

SANS 62310-1:2005/IEC 62310-1:2005, IDT, Ed. 1

SANS 62310-2:2006/IEC 62310-2:2006, IDT, Ed. 1

SANS 62310-3:2008/IEC 62310-3:2008, IDT, Ed. 1

SANS 62311:2008/IEC 62311:2007, IDT, Ed. 1

SANS 62316:2007/IEC TR 62316:2007, IDT, Ed. 2

SANS 62335:2009/IEC 62335:2008, IDT, Ed. 1

SANS 62371:2008/IEC/TS 62371:2008, IDT, Ed. 1

SANS 62384:2008/IEC 62384:2006, IDT, Ed. 1

SANS 62552:2008/IEC 62552:2007, IDT, Ed. 1

SANS Number

(SANS 62305-1)

(SANS 62305-3)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Software engineering - Guidelines for the applicationof ISO 9001:2000 to computer software

Guidelines for quality management systemdocumentation

Electromagnetic compatibility and Radio spectrumMatters (ERM); Radio site engineering for radioequipment and systems in the mobile service

Uncertainty of measurement Part 3: Guide to theexpression of uncertainty in measurement(GUM:1995)

International vocabulary of metrology - Basic andgeneral concepts and associated terms (VIM)

Electromagnetic compatibility and Radio spectrumMatters (ERM); Classification of the electromagneticenvironment conditions for equipment intelecommunication networks

Access network xDSL transmission filters Part 1:ADSL splitters for European deployment Sub-part 1:Generic specification of the low pass part of DSLover POTS splitters including dedicated annexes forspecific xDSL variants

Access network xDSL transmission filters Part 1:ADSL splitters for European deployment Sub-part 2:Specification of the high pass part of ADSL/POTSsplitters

Access network xDSL transmission filters Part 1:ADSL splitters for European deployment Sub-part 3:Specification of ADSL/ISDN splitters

Access network xDSL transmission filters Part 1:ADSL splitters for European deployment Sub-part 4:Specification of ADSL over "ISDN or POTS"universal splitters

Access network xDSL transmission filters Part 1:ADSL splitters for European deployment Sub-part 5:Specification for ADSL over POTS distributed filters

Broadband Radio Access Networks (BRAN);HiperMAN; Physical (PHY) layer

Broadband Radio Access Networks (BRAN);HiperMAN; Data Link Control (DLC) layer

Broadband Radio Access Networks (BRAN);HIPERMAN; System profiles

Access and Terminals (AT); Analogue Access toPublic Telephone Network; Advisory Notes toStandards Harmonizing Terminal Interface Part 2:Generally applicable Advisory Notes; Sub-part 1:Modification to sending spectral densityrequirements

Title


SANS 100013:2003/ISO/TR 10013:2001, IDT, Ed. 1

SANS 100053:1998/ETSI TR 100 053:1998, IDT, Ed.1

SANS 100098-3:2009/ISO/IEC Guide 98-3:2008, IDT,Ed. 1

SANS 100099:2008/ISO/IEC Guide 99:2007, IDT, Ed.3

SANS 101651:2005/ETSI TR 101651:1999, IDT, Ed.V1.1.1

SANS 101952-1-1:2006/ETSI TS 101952-1-1:2004,IDT, Ed. V1.2.1





SANS 102177:2006/ETSI TS 102177:2006, IDT, Ed.V1.3.2



SANS 103000-2-1:2005/ETSI TR 103000-2-1:2002,IDT, Ed. V1.1.1

SANS Number

(SABS ETSI TR 100053)


October 2009

1

2

1

1

1

1

1

1

1

1

1

Edition

Access and Terminals (AT); Analogue Access toPublic Network; Advisory Notes to Standardsharmonizing terminal interface Part 4: Informationarising from CEC decisions; Sub-part 1: Generalloop steady state requirements

Electromagnetic compatibility and Radio spectrumMatters (ERM); Radio site engineering for radioequipment and systems

2-wire analogue voice band interfaces; LoopDisconnect (LD) dialling specific requirements

Electromagnetic compatibility and Radio spectrumMatters (ERM); Additional ElectroMagneticCompatibility (EMC) requirements and resistibilityrequirements for telecommunications equipment forenhanced availability of service in specificapplications

Public Switched Telephone Network (PSTN); 2-wireanalogue voice band switched interfaces; Timedbreak recall (register recall); Specific requirementsfor terminals

Electromagnetic compatibility and Radio spectrumMatters (ERM); Land Mobile Service; Radioequipment with an internal or external RF connectorintended primarily for analogue speech Part 1:Technical characteristics and methods ofmeasurement

Electromagnetic compatibility and Radio spectrumMatters (ERM); Land Mobile Service; Radioequipment with an internal or external RF connectorintended primarily for analogue speech Part 2:Harmonized EN covering essential requirementsunder article 3.2 of the R&TTE Directive

Integrated Services Digital Network (ISDN); Supportof CCITT Recommendation X.21, X.21 bis and X.20bis based Data Terminal Equipments (DTEs) by anISDN; Synchronous and asynchronous terminaladaption functions

Electromagnetic compatibility and Radio spectrumMatters (ERM); Land mobile service; Radioequipment intended for the transmission of data(and/or speech) using constant or non-constantenvelope modulation and having an antennaconnector; Part 1: Technical characteristics andmethods of measurement

Electromagnetic compatibility and Radio spectrumMatters (ERM); Land mobile service; Radioequipment intended for the transmission of data(and/or speech) using constant or non-constantenvelope modulation and having an antennaconnector; Part 2: Harmonized EN coveringessential requirements under article 3.2 of theR&TTE Directive

Electromagnetic compatibility and Radio spectrumMatters (ERM) - Radiated emission testing ofphysically large telecommunication systems

Title

SANS 103000-4-1:2005/ETSI TR 103000-4-1:2003,IDT, Ed. V1.1.1

SANS 200053:2006/ETSI EG 200053:2004, IDT, Ed.V1.5.1

SANS 201187:2005/ETSI ES 201187:1999, IDT, Ed.V1.1.1



SANS 300086-1:2005/ETSI EN 300086-1:2001, IDT,Ed. V1.2.1


SANS 300103:1990/ETS 300103:1990, IDT



SANS 300127:1999/EN 300127:1999, IDT

SANS Number

(SABS ETS 300103)

(SABS EN 300127)


October 2009

1

1

1

1

1

1

1

1

2

1

1

1

1

Edition

Radio Equipment and Systems (RES); Common airinterface specification to be used for theinterworking between cordless telephone apparatusin the frequency band 864,1 MHz to 868,1 MHz,including public access services

Equipment Engineering (EE); Power supply interfaceat the input to telecommunications equipment Part1: Operated by alternating current (ac) derived fromdirect current (dc) sources

Environmental Engineering (EE); Power supplyinterface at the input to telecommunicationsequipment Part 2: Operated by direct current (dc)

Environmental Engineering (EE); Power supplyinterface at the input to telecommunicationsequipment Part 3: Operated by rectified currentsource, alternating current source or direct currentsource up to 400 V

Digital Enhanced Cordless Telecommunications(DECT); Common Interface (CI) Part 1: Overview

Digital Enhanced Cordless Telecommunications(DECT); Common Interface (CI) Part 2: PhysicalLayer (PHL)

Fixed Radio Systems; Point-to-point equipment;Parameters for radio systems for the transmission ofdigital signals operating at 32 GHz and 38 GHz

Fixed Radio Systems; Point-to-point equipment;Parameters for radio systems for the transmission ofdigital signals operating at 23 GHz

Electromagnetic compatibility and Radio spectrumMatters (ERM); Short Range Devices (SRD); Radioequipment to be used in the 25 MHz to 1 000 MHzfrequency range with power levels ranging up to 500mW; Part 1: Technical characteristics and testmethods

Electromagnetic compatibility and Radio spectrumMatters (ERM); Short Range Devices (SRD); Radioequipment to be used in the 25 MHz to 1 000 MHzfrequency range with power levels ranging up to 500mW; Part 3: Harmonized EN covering essentialrequirements under article 3.2 of the R&TTEDirective

Electromagnetic compatibility and Radio spectrumMatters (ERM); On-site paging service Part 1:Technical and functional characteristics, includingtest methods

Electromagnetic compatibility and Radio spectrumMatters (ERM); On-site paging service Part 2:Harmonized EN under article 3.2 of the R&TTEDirective

Fixed Radio Systems; Point-to-point equipment;High capacity digital radio systems carrying 1 xSTM-1 signals and operating in frequency bandswith about 30 MHz channel spacing and alternatedarrangements

Title

SANS 300131:2006/I-ETS 300131:1994, IDT, Ed. 2

SANS 300132-1:2004/ETS 300132-1:1996, IDT, Ed.1





SANS 300197:2005/ETSI EN 300197:2002, IDT, Ed.V1.6.1







SANS Number


October 2009

1.01

1

2

2

2

1

3

1

2

1

2

1

1

Edition

Satellite earth stations; television receive-onlyequipment used in the broadcasting satellite service

Electromagnetic compatibility and Radio spectrumMatters (ERM); Land Mobile Service; Radioequipment using integral antennas intendedprimarily for analogue speech Part 2: HarmonizedEN covering essential requirements under article 3.2of the R&TTE Directive

Electromagnetic compatibility and Radio spectrumMatters (ERM); Wideband transmission systems;Data transmission equipment operating in the 2,4GHz ISM band and using wide band modulationtechniques; Harmonized EN covering essentialrequirements under article 3.2 of the R&TTEDirective

Electromagnetic compatibility and Radio spectrumMatters (ERM); Short Range Devices (SRD); Radioequipment in the frequency range 9 kHz to 25 MHzand inductive loop systems in the frequency range 9kHz to 30 MHz; Part 1: Technical characteristics andtest methods

Electromagnetic compatibility and Radio spectrumMatters (ERM); Short Range Devices (SRD); Radioequipment in the frequency range 9 kHz to 25 MHzand inductive loop systems in the frequency range 9kHz to 30 MHz; Part 2: Harmonized EN under article3.2 of the R&TTE Directive

Electromagnetic compatibility and Radio spectrumMatters (ERM) - General ElectroMagneticCompatibility (EMC) for radio communicationsequipment

Electromagnetic compatibility and Radio spectrumMatters (ERM); Telecommunication networkequipment; ElectroMagnetic Compatibility (EMC)requirements

Radio Broadcasting Systems; Digital AudioBroadcasting (DAB) to mobile, portable and fixedreceivers

Digital Video Broadcasting (DVB); Framingstructure, channel coding and modulation for 11/12GHz satellite services

Electromagnetic compatibility and Radio spectrumMatters (ERM); Wireless microphones in the 25 MHzto 3 GHz frequency range Part 1: Technicalcharacteristics and test methods

Digital Video Broadcasting (DVB); Framingstructure, channel coding and modulation for cablesystems

Fixed Radio Systems; Point-to-point equipment;Parameters for radio systems for the transmission ofSTM-1 digital signals operating in the 18 GHzfrequency band with channel spacing of 55 MHz and27,5 MHz

Fixed Radio Systems; Point-to-point equipment;Parameters for radio system for the transmission ofdigital signals operating in the frequency range24,50 GHz to 29,50 GHz

Title

SANS 300249:2007





SANS 300339:1998/EN 300339:1998, IDT



SANS 300421:2007/ETS 300421:1997, IDT, Ed.V1.1.2


SANS 300429:2003/EN 300429:1998, IDT, Ed.V1.2.1



SANS Number

(SABS 300249)

(SABS EN 300339)

(SABS ETSI EN 300386)

(SABS ETS 300421)

(SABS ETS 300429)


October 2009

1

2

2

2

1

1

1

1

1

1

1

1

1

1

Edition

Electromagnetic compatibility and Radio spectrumMatters (ERM); Short range devices; Radioequipment to be used in the 1 GHz to 40 GHzfrequency range Part 1: Technical characteristicsand test methods

Digital Video Broadcasting (DVB) - Specification forService Information (SI) in DVB systems

Digital Video Broadcasting (DVB); Specification forconveying ITU-R System B Teletext in DVBbitstreams

Digital Video Broadcasting (DVB); Satellite MasterAntenna Television (SMATV) distribution systems

Fixed Radio Systems; Point-to-point equipment; Lowcapacity point-to-point digital radio systemsoperating in the 1,4 GHz frequency band

Fixed Radio Systems; Point-to-point equipment; Lowand medium capacity point-to-point digital radiosystems operating in the frequency range 2,1 GHzto 2,6 GHz

Fixed Radio Systems; Point-to-multipoint equipment;Time Division Multiple Access (TDMA); Point-to-multipoint digital radio systems in frequency bandsin the range 1 GHz to 3 GHz

Fixed Radio Systems; Point-to-point equipment;Sub-STM-1 digital radio systems operating in the 13GHz, 15 GHz and 18 GHz frequency bands withabout 28 MHz co-polar and 14 MHz cross-polarchannel spacing

Electromagnetic compatibility and Radio spectrumMatters (ERM); Road Transport and TrafficTelematics (RTTT); Dedicated Short RangeCommunication (DSRC) transmission equipment(500 kbit/s / 250 kbit/s) operating in the 5,8 GHzIndustrial, Scientific and Medical (ISM) band Part 1:General characteristics and test methods for RoadSide Units (RSU) and On-Board Units (OBU)

Enhanced Teletext specification

Digital Video Broadcasting (DVB); Framingstructure, channel coding and modulation for digitalterrestrial television

Fixed Radio Systems; Point-to-point equipment;Sub-STM-1 digital radio systems operating in the 13GHz, 15 GHz and 18 GHz frequency bands withabout 14 MHz co-polar channel spacing

Broadband Radio Access Networks (BRAN); HIghPErformance Radio Local Area Network(HIPERLAN) Type 1; Conformance testingspecification Part 1: Radio type approval and RadioFrequency (RF) conformance test specification

Fixed Radio Systems; Point-to-multipoint equipment;Time Division Multiple Access (TDMA); Point-to-multipoint digital radio systems in frequency bandsin the range 3 GHz to 11 GHz

Title


SANS 300468:2007/ETS 300468:2006, IDT, Ed.V1.7.1

SANS 300472:2007/ETS 300472:2003, IDT, Ed.V1.3.1

SANS 300473:2007/ETS 300473:1997, IDT, Ed.V1.1.2









SANS 300836-1:2006/ETS 300836-1:1998, IDT, Ed.1


SANS Number

(SABS ETS 300468)

(SABS ETS 300472)

(SABS ETS 300473)


October 2009

1

1

1

1

1

1

1

1

2

1

2

Edition

Electromagnetic compatibility and Radio spectrumMatters (ERM); Short Range Devices; RoadTransport and Traffic Telematics (RTTT); Radarequipment operating in the 76 GHz to 77 GHzrange; Part 2: Harmonized EN covering essentialrequirements of article 3.2 of the R&TTE Directive

Fixed Radio Systems; Point-to-point equipment;High capacity digital radio systems carrying SDHsignals (up to 2 x STM-1) in frequency bands withabout 30 MHz channel spacing and using co-polararrangements or Co-Channel Dual Polarized(CCDP) operation

Fixed Radio Systems; Point-to-point equipment;Plesiochronous Digital Hierarchy (PDH); Low andmedium capacity digital radio systems operating inthe 13 GHz, 15 GHz and 18 GHz frequency bands

Fixed Radio Systems; Point-to-multipoint equipment;Point-to-multipoint digital radio systems in frequencybands in the range 24,25 GHz to 29,5 GHz usingdifferent access methods Part 1: Basic parameters

Fixed Radio Systems; Point-to-point equipment;Plesiochronous Digital Hierarchy (PDH); Low andmedium capacity and STM-O digital radio systemoperating in the frequency bands in the range 3 GHzto 11 GHz

Fixed Radio Systems; Point-to-point equipment;High capacity digital radio systems transmittingSTM-4 or 4 x STM-1 in a 40 MHz radio frequencychannel using Co-Channel Dual Polarized (CCDP)operation

Electromagnetic compatibility and Radio spectrumMatters (ERM); Cordless audio devices in the range25 MHz to 2 000 MHz Part 1: Technicalcharacteristics and test methods

Digital Enhanced Cordless Telecommunications(DECT); Harmonized EN for Digital EnhancedCordless Telecommunications (DECT) coveringessential requirements under article 3.2 of theR&TTE Directive; Generic radio

Satellite Earth Stations and Systems (SES);Harmonized EN for Very Small Aperture Terminal(VSAT); Transmit-only, transmit/receive or receive-only satellite earth stations operating in the 11/12/14GHz frequency bands covering essentialrequirements under article 3.2 of the R&TTEdirective

Satellite Earth Stations and Systems (SES);Harmonized EN for Satellite News GatheringTransportable Earth Stations (SNG TES) operatingin the 11-12/13-14 GHz frequency bands coveringessential requirements under article 3.2 of theR&TTE directive

Satellite Earth Stations and Systems (SES);Harmonized EN for Very Small Aperture Terminal(VSAT); Transmit-only, transmit-and-receive,receive-only satellite earth stations operating in the4 GHz and 6 GHz frequency bands coveringessential requirements under article 3.2 of theR&TTE Directive

Title

SANS 301091-2:2008/ETSI EN 301091-2:2004, IDT,Ed. V 1.2.1











SANS Number


October 2009

1

2

2

2

2

1

2

3

2

1

1

Edition

Fixed Radio Systems; Point-to-point equipment;High capacity fixed radio systems carrying SDHsignals (2 x STM-1) in frequency bands with 40 MHzchannel spacing and using Co-Channel DualPolarized (CCDP) operation

Electromagnetic compatibility and Radio spectrumMatters (ERM) - ElectroMagnetic Compatibility(EMC) standard for radio equipment and servicesPart 1: Common technical requirements

Electromagnetic compatibility and Radio spectrumMatters (ERM); ElectroMagnetic Compatibility (EMC)standard for radio equipment and services Part 2:Specific conditions for radio paging equipment

Electromagnetic compatibility and Radio spectrumMatters (ERM); ElectroMagnetic Compatibility (EMC)standard for radio equipment and services Part 3:Specific conditions for Short-Range Devices (SRD)operating on frequencies between 9 kHz and 40GHz

Electromagnetic compatibility and Radio spectrumMatters (ERM); ElectroMagnetic Compatibility (EMC)standard for radio equipment and services Part 4:Specific conditions for fixed radio links and ancillaryequipment and services

Electromagnetic compatibility and Radio spectrumMatters (ERM); ElectroMagnetic Compatibility (EMC)standard for radio equipment and services Part 5:Specific conditions for Private land Mobile Radio(PMR) and ancillary equipment (speech and non-speech)

Electromagnetic compatibility and Radio spectrumMatters (ERM); ElectroMagnetic Compatibility (EMC)standard for radio equipment and services Part 6:Specific conditions for Digital Enhanced CordlessTelecommunications (DECT) equipment

Electromagnetic compatibility and Radio spectrumMatters (ERM); ElectroMagnetic Compatibility (EMC)standard for radio equipment and services Part 7:Specific conditions for mobile and portable radio andancillary equipment of digital cellular radiotelecommunications systems (GSM and DCS)

Electromagnetic compatibility and Radio spectrumMatters (ERM); ElectroMagnetic Compatibility (EMC)standard for radio equipment and services Part 8:Specific conditions for GSM base stations

Electromagnetic compatibility and Radio spectrumMatters (ERM); Electromagnetic compatibility (EMC)standard for radio equipment and services Part 9:Specific conditions for wireless microphones, similarRadio Frequency (RF) audio link equipment,cordless audio and in-ear monitoring devices

Electromagnetic compatibility and Radio spectrumMatters (ERM); ElectroMagnetic Compatibility (EMC)standard for radio equipment and services Part 11:Specific conditions for terrestrial sound broadcastingservice transmitters

Title











SANS 301489-11:2004/ETSI EN 301489-11:2002,IDT, Ed. V1.2.1

SANS Number

(SABS ETSI EN 301489-1)








October 2009

2

1

1

2

1

1

1

1

1

2

Edition

Electromagnetic compatibility and Radio SpectrumMatters (ERM); ElectroMagnetic compatibility (EMC)standard for radio equipment and services Part 12:Specific conditions for Very Small ApertureTerminal, Satellite Interactive Earth Stationsoperated in the frequency ranges between 4 GHzand 30 GHz in the Fixed Satellite Service (FSS)

Electromagnetic compatibility and Radio spectrumMatters (ERM); ElectroMagnetic Compatibility (EMC)standard for radio equipment and services Part 14:Specific conditions for analogue and digitalterrestrial TV broadcasting service transmitters

Electromagnetic compatibility and Radio spectrumMatters (ERM); ElectroMagnetic Compatibility (EMC)standard for radio equipment and services Part 15:Specific conditions for commercially availableamateur radio equipment

Electromagnetic compatibility and Radio spectrumMatters (ERM); ElectroMagnetic Compatibility (EMC)standard for radio equipment and services Part 17:Specific conditions for 2,4 GHz widebandtransmission systems and 5 GHz high performanceRLAN equipment

Electromagnetic compatibility and Radio spectrumMatters (ERM); ElectroMagnetic Compatibility (EMC)standard for radio equipment and services Part 18:Specific conditions for Terrestrial Trunked Radio(TETRA) equipment

Electromagnetic compatibility and Radio spectrumMatters (ERM); ElectroMagnetic Compatibility (EMC)standard for radio equipment and services Part 19:Specific conditions for Receive Only Mobile EarthStations (ROMES) operating in the 1,5 GHz bandproviding data communications

Electromagnetic compatibility and Radio spectrumMatters (ERM); ElectroMagnetic Compatibility (EMC)standard for radio equipment and services Part 20:Specific conditions for Mobile Earth Stations (MES)used in the Mobile Satellite Services (MSS)

Electromagnetic compatibility and Radio spectrumMatters (ERM); ElectroMagnetic Compatibility (EMC)standard for radio equipment and services Part 22:Specific conditions for ground based VHFaeronautical mobile and fixed radio equipment

Electromagnetic compatibility and Radio spectrumMatters (ERM); ElectroMagnetic Compatibility (EMC)standard for radio equipment and services Part 23:Specific conditions for IMT-2000 CDMA DirectSpread (UTRA) Base Station (BS) radio, repeaterand ancillary equipment

Electromagnetic compatibility and Radio spectrumMatters (ERM); ElectroMagnetic Compatibility (EMC)standard for radio equipment and services Part 24:Specific conditions for IMT-2000 CDMA DirectSpread (UTRA) for Mobile and portable (UE) radioand ancillary equipment

Title











SANS Number




October 2009

2

1

1

1

1

1

1

1

1

1

1

1

Edition

Electromagnetic compatibility and Radio spectrumMatters (ERM); ElectroMagnetic Compatibility (EMC)standard for radio equipment and services Part 25:Specific conditions for CDMA 1x spread spectrumMobile Stations and ancillary equipment

Electromagnetic compatibility and Radio spectrumMatters (ERM); ElectroMagnetic Compatibility (EMC)standard for radio equipment and services Part 26:Specific conditions for CDMA 1x spread spectrumBase Stations, repeaters and ancillary equipment

Harmonized EN for Global System for Mobilecommunications (GSM); Base Station and Repeaterequipment covering essential requirements underarticle 3.2 of the R&TTE directive (GSM 13.21version 8.1.2 Release 1999)

Global System for Mobile communications (GSM);Harmonized EN for mobile stations in the GSM 900and GSM 1800 bands covering essentialrequirements under article 3.2 of the R&TTEdirective (1999/5/EC)

Fixed Radio Systems; Point-to-point equipment;High capacity digital radio systems carrying STM-4in two 40 MHz channels or 2 x STM-1 in a 40 MHzchannel with alternate channel arrangement

Fixed Radio Systems; Point-to-point equipments andantennas; Generic harmonized standard for Point-to-Point digital fixed radio systems and antennascovering the essential requirements under article 3.2of the 1999/5/EC Directive

Fixed Radio Systems; Multipoint equipment andantennas; Generic harmonized standard formultipoint digital fixed radio systems and antennascovering the essential requirements under article 3.2of the Directive 1999/5/EC

Electromagnetic compatibility and Radio SpectrumMatters (ERM); Harmonized EN for CT2 cordlesstelephone equipment covering essentialrequirements under article 3.2 of the R&TTEdirective

Electromagnetic compatibility and Radio spectrumMatters (ERM); ElectroMagnetic Compatibility (EMC)standard for marine radio equipment and services;Part 1: Common technical requirements

Electromagnetic compatibility and Radio spectrumMatters (ERM); ElectroMagnetic Compatibility (EMC)standard for marine radio equipment and servicesPart 2: Specific conditions for VHF radiotelephonetransmitters and receivers

Broadband Radio Access Networks (BRAN); 5 GHzhigh performance RLAN; Harmonized EN coveringessential requirements of article 3.2 of the R&TTEDirective

Electromagnetic compatibility and Radio spectrumMatters (ERM); Base Stations (BS), Repeaters andUser Equipment (UE) for IMT-2000 Third-Generationcellular networks Part 1: Harmonized EN for IMT-2000, introduction and common requirements,covering essential requirements of article 3.2 of theR&TTE Directive

Title



SANS 301502:2005/ETSI EN 301502:2001, IDT, Ed.V 8.1.2

SANS 301511:2005/ETSI EN 301511:2003, IDT, Ed.V 9.0.2









SANS Number


October 2009

1

1

1

1

1

1

1

1

Edition

Electromagnetic compatibility and Radio spectrumMatters (ERM); Base Stations (BS), Repeaters andUser Equipment (UE) for IMT-2000 Third-Generationcellular networks Part 2: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE)covering essential requirements of article 3.2 of theR&TTE Directive

Electromagnetic compatibility and Radio spectrumMatters (ERM); Base Stations (BS), Repeaters andUser Equipment (UE) for IMT-2000 Third-Generationcellular networks Part 3: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (BS)covering essential requirements of article 3.2 of theR&TTE Directive

Electromagnetic compatibility and Radio spectrumMatters (ERM); Base Stations (BS), Repeaters andUser Equipment (UE) for IMT-2000 Third-Generationcellular networks Part 4: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE)covering essential requirements of article 3.2 of theR&TTE Directive

Electromagnetic compatibility and Radio spectrumMatters (ERM); Base Stations (BS), Repeaters andUser Equipment (UE) for IMT-2000 Third-Generationcellular networks Part 5: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (BS andRepeaters) covering essential requirements ofarticle 3.2 of the R&TTE Directive

Electromagnetic compatibility and Radio spectrumMatters (ERM); Base Stations (BS), Repeaters andUser Equipment (UE) for IMT-2000 Third-Generationcellular networks Part 6: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (UE) coveringessential requirements of article 3.2 of the R&TTEDirective

Electromagnetic compatibility and Radio spectrumMatters (ERM); Base Stations (BS), Repeaters andUser Equipment (UE) for IMT-2000 Third-Generationcellular networks Part 7: Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) coveringessential requirements of article 3.2 of the R&TTEDirective

Electromagnetic compatibility and Radio spectrumMatters (ERM); Base Stations (BS) Repeaters andUser Equipment (UE) for IMT-2000 Third-Generationcellular networks Part 8: Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE)covering essential requirements of article 3.2 of theR&TTE Directive

Electromagnetic compatibility and Radio spectrumMatters (ERM); Base Stations (BS), Repeaters andUser Equipment (UE) for IMT-2000 Third-Generationcellular networks Part 9: Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS)covering essential requirements of article 3.2 of theR&TTE Directive

Title









SANS Number


October 2009

1

1

1

1

1

1

1

1

1

2

1

2

3.01

Edition

Electromagnetic compatibility and Radio spectrumMatters (ERM); Base Stations (BS), Repeaters andUser Equipment (UE) for IMT-2000 Third-Generationcellular networks Part 10: Harmonized EN for IMT-2000, FDMA/TDMA (DECT) covering essentialrequirements of article 3.2 of the R&TTE Directive

Electromagnetic compatibility and Radio spectrumMatters (ERM); Base Stations (BS), Repeaters andUser Equipment (UE) for IMT-2000 Third-Generationcellular networks Part 11: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD)(Repeaters) covering essential requirements ofarticle 3.2 of the R&TTE Directive

Fixed Radio Systems; Characteristics andrequirements for point-to-point equipment andantennas Part 2-2: Harmonized EN coveringessential requirements of Article 3.2 of R&TTEDirective for digital systems operating in frequencybands where frequency co-ordination is applied

Fixed Radio Systems; Characteristics andrequirements for point-to-point equipment andantennas Part 3: Harmonized EN covering essentialrequirements of Article 3.2 of R&TTE Directive forequipment operating in frequency bands where nofrequency co-ordination is applied

Fixed Radio Systems; Characteristics andrequirements for point-to-point equipment andantennas Part 4-2: Harmonized EN coveringessential requirements of Article 3.2 of R&TTEDirective for antennas

Fixed Radio Systems; Multipoint Equipment andAntennas Part 2: Harmonized EN covering theessential requirements of article 3.2 of the R&TTEDirective for Digital Multipoint Radio Equipment

Fixed Radio Systems; Multipoint Equipment andAntennas Part 3: Harmonized EN covering theessential requirements of article 3.2 of the R&TTEDirective for Multipoint Radio Antennas

Terrestrial Trunked Radio (TETRA); Harmonized ENfor TETRA equipment covering essentialrequirements under article 3.2 of the R&TTEDirective Part 1: Voice plus Data (V+D)

Terrestrial Trunked Radio (TETRA); Harmonized ENfor TETRA equipment covering essentialrequirements under article 3.2 of the R&TTEDirective Part 2: Direct Mode Operation (DMO)

The international metric system (SI). Guide to theuse of the SI in South Africa

A guide to health hazards and personal protection inthe paint industry

The care, maintenance and use of motor vehicletyres and rims (incorporating TREDCO guidelines)

Rules for the structure and drafting of nationalstandards

Title



SANS 302217-2-2:2008/ETSI EN 302217-2-2:2004,IDT, Ed. V1.1.3


SANS 302217-4-2:2008/ETSI EN 302217-4-2:2006,IDT, Ed. V1.2.1





M 33 A:1992

ARP 006:1991

ARP 007:1992

ARP 013:2006

SANS Number

(M 33 A)

(ARP 006)

(ARP 007)

(ARP 013)


October 2009

1

2

1

2.03

1

1

1

1

1

1.01

1

1

1

1

1

1

1

1

1

Edition

Purchase information on goods and servicesintended for consumers

Methodology for the development of standards

The application of SABS 0259 with respect to theaccreditation of non-destructive testing facilities fortechnical competence

Guidelines for the installation and maintenance ofstreet lighting

Environmental guidelines for industrial woodpreservation

The use of reinforcement cover devices forreinforced concrete

Packaging - Recommendations for addressingconsumer needs

Barcoding for South African steel industry products

Steel wire rope end connections

Low-smoke solid fuel (LSSF) for household use

Guidance on the use and application of hot-dipgalvanized steel piping for the transportation ofpotable water in South Africa

Procurement guide for large cage and wound-rotorinduction motors of medium voltage

Recommendations for small renewable energy andhybrid systems for rural electrification Part 1:General introduction to rural electrification

Recommendations for small renewable energy andhybrid systems for rural electrification Part 2: Fromrequirements to a range of electrification systems

Recommendations for small renewable energy andhybrid systems for rural electrification Part 3: Projectdevelopment and management

Recommendations for small renewable energy andhybrid systems for rural electrification Part 4: Systemselection and design

Recommendations for small renewable energy andhybrid systems for rural electrification Part 5:Protection against electrical hazards

Recommendations for small renewable energy andhybrid systems for rural electrification Part 6:Acceptance, operation, maintenance andreplacement

Recommendations for small renewable energy andhybrid systems for rural electrification Part 7-1:Generators - Photovoltaic arrays

Title

ARP 14:2008/ISO/IEC Guide 14:2003, IDT, Ed. 2

ARP 015:1998/ISO/IEC Directives Part 2:1992, NEQ

ARP 027:1993

ARP 035:2007

ARP 039:1997

ARP 040:1998


ARP 041:1997

ARP 051:2002

ARP 056:2007

ARP 060:2004

ARP 061:2006

ARP 062-1:2005/IEC/TS 62257-1:2003, IDT, Ed. 1

ARP 062-2:2005/IEC/TS 62257-2:2004, IDT, Ed. 1

ARP 062-3:2006/IEC/TS 62257-3:2004, IDT, Ed. 1

ARP 062-4:2006/IEC/TS 62257-4:2005, IDT, Ed. 1

ARP 062-5:2006/IEC/TS 62257-5:2005, IDT, Ed. 1

ARP 062-6:2006/IEC/TS 62257-6:2005, IDT, Ed. 1

ARP 062-7-1:2008/IEC/TS 62257-7-1:2006, IDT, Ed.1

SANS Number

(ARP 015)

(ARP 027)

(ARP 035)

(ARP 039)

(ARP 040)

(ARP 041)

(ARP 051)

(ARP 056)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Recommendations for small renewable energy andhybrid systems for rural electrification Part 7-3:Generator set - Selection of generator sets for ruralelectrification systems

Recommendations for small renewable energy andhybrid systems for rural electrification Part 7:Generators

Recommendations for small renewable energy andhybrid systems for rural electrification Part 8-1:Selection of batteries and battery managementsystems for stand-alone electrification systems -Specific case of automotive flooded lead-acidbatteries available in developing countries

Recommendations for small renewable energy andhybrid systems for rural electrification Part 9-1:Micropower systems

Recommendations for small renewable energy andhybrid systems for rural electrification Part 9-2:Microgrids

Recommendations for small renewable energy andhybrid systems for rural electrification Part 9-3:Integrated system - User interface

Recommendations for small renewable energy andhybrid systems for rural electrification Part 9-4:Integrated system - User installation

Recommendations for small renewable energy andhybrid systems for rural electrification Part 9-5:Integrated system - Selection of portable PVlanterns for rural electrification projects

Recommendations for small renewable energy andhybrid systems for rural electrification Part 9-6:Integrated system - Selection of PhotovoltaicIndividual Electrification Systems (PV-IES)

Recommendations for small renewable energy andhybrid systems for rural electrification Part 12-1:Selection of self-ballasted lamps (CFL) for ruralelectrification systems and recommendations forhousehold lighting equipment

Quality management systems - Guidelines for theapplication of SANS 9001:2000 in local government

Graphical symbols - Safety signs - Safety wayguidance systems (SWGS)

Test and fitment centres for airbags

Content Delivery and Rights Management:Functional requirements for identifiers anddescriptors for use in the music, film, video, soundrecording and publishing industries

Road transport management systems Part 1:Operator requirements - Goods

Road transport management systems Part 2:Consignor requirements - Goods

Title

ARP 062-7-3:2008/IEC 62257-7-3:2008, IDT, Ed. 1

ARP 062-7:2008/IEC/TS 62257-7:2008, IDT, Ed. 1

ARP 062-8-1:2007/IEC/TS 62257-8-1:2007, IDT, Ed.1

ARP 062-9-1:2009/IEC/TS 62257-9-1:2008, IDT, Ed.1

ARP 062-9-2:2008/IEC/TS 62257-9-2:2006, IDT, Ed.1

ARP 062-9-3:2008/IEC/TS 62257-9-3:2006, IDT, Ed.1

ARP 062-9-4:2008/IEC/TS 62257-9-4:2006, IDT, Ed.1

ARP 062-9-5:2007/IEC/TS 62257-9-5:2007, IDT, Ed.1

ARP 062-9-6:2009/IEC/TS 62257-9-6:2008, IDT, Ed.1

ARP 062-12-1:2008/IEC/TS 62257-12-1:2007, IDT,Ed. 1

ARP 063:2005/IWA 4:2005, IDT, Ed. 1

ARP 064:2005/ISO 16069:2004, IDT, Ed. 1

ARP 065:2007

ARP 066:2006/ISO/TR 21449:2004, IDT, Ed. 1

ARP 067-1:2007

ARP 067-2:2008

SANS Number


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1.01

1

1

1

1

1

1

Edition

Road transport management systems Part 3:Consignee requirements - Goods

Inspection and non-destructive testing of previously-installed OEM airbag inflator modules in motorvehicles

Risk management - Vocabulary - Guidelines for usein standards

Guidelines for standards developers to address theneeds of older persons and persons with disabilities

Micrographics - Inspection of silver-gelatinmicroforms for evidence of deterioration

Electronic imaging - Guidance for selection ofdocument image compression methods

Micrographics - Expungement, deletion, correctionor amendment of records on microforms

Electronic imaging - Recommendations for themanagement of electronic recording systems for therecording of documents that may be required asevidence, on WORM optical disk

Development of service standards -Recommendations for addressing consumer issues

Electronic imaging - Human and organizationalissues for successful Electronic Image Management(EIM) implementation

Long-term preservation of electronic document-based information

Guidelines for the preparation of maintenancecontracts

Quality management systems - Guidelines for theapplication of ISO 9001:2000 in education

Regulatory requirements for explosion-protectedapparatus

Energy management - Guidance on energymanagement

Safety aspects - Guidelines for child safety

Safety aspects - Guidelines for their inclusion instandards

Ethanol gel fuel for cooking and other gel burningappliances

Guide for addressing environmental issues inproduct standards

Standardization and related activities - Generalvocabulary

Title

ARP 067-3:2008

ARP 068:2007

ARP 070:2007/ISO/IEC Guide 73:2002, IDT


ARP 072:2006/ISO/TR 12031:2000, IDT, Ed. 1

ARP 073:2006/ISO/TS 12033:2001, IDT, Ed. 1

ARP 074:2006/ISO/TR 12036:2000, IDT, Ed. 1

ARP 075:2006/ISO/TR 12654:1997, IDT, Ed. 1


ARP 076:2006/ISO/TR 14105:2001, IDT, Ed. 1

ARP 077:2006/ISO/TR 18492:2005, IDT, Ed. 1

ARP 078:2009

ARP 082:2008/IWA 2:2007, IDT, Ed. 1

ARP 0108:2007

ARP 136:2009/DS/INF 136:2001, IDT, Ed. 1



ARP 448:2007

ARP 720:2008/ISO Guide 64:2008, IDT, Ed. 2


SANS Number

(ARP 0108)


October 2009

1

1

1

1

1

1

1

1

1

1

1

1

1

1

3

2

2

3

1

Edition

Guidelines for information security risk management

Small craft - Rigging screws for stainless steel wirerope - Principal dimensions for forks, connectionpins and eye-holes

South African national scheme for IssuerIdentification Numbers (IIN) and ApplicationIdentification numbers (AID)

Comparison of worldwide lift safety standards Part 1:Electric lifts (elevators)

Comparison of worldwide lift safety standards Part 2:Hydraulic lifts (elevators)

Guidelines for the selection of statistical methods instandardization and specification

Comparison of worldwide escalator and moving walksafety standards Part 1: Rule by rule comparison

Comparison of worldwide escalator and moving walksafety standards Part 2: Abbreviated comparisonand comments

Lifts, escalators and passenger conveyors -Comparison of worldwide safety standards onelectromagnetic interference/electromagneticcompatibility

Comparison of worldwide safety standards on liftsfor firefighters

Societal security - Guideline for incidentpreparedness and operational continuitymanagement

Information and documentation - Recordsmanagement processes - Metadata for records Part2: Conceptual and implementation issues

Guidelines for using UML notation in terminologywork

Effects of current on human beings and livestockPart 5: Touch voltage threshold values forphysiological effects

Policy and guide for standardization and co-ordination of purchases

Laminated timber for furniture

Melamine tableware

Envelopes

Rigid uncovered paperboard boxes

Title

ARP 4360:2003/AS/NZS 4360:1999, IDT, Ed. 2

ARP 4558:2008/ISO/TR 4558:1985, IDT, Ed. 1

ARP 7812:2005/ISO/IEC 7812-2:2000, NEQ, Ed. 2;ISO/IEC 7812-1:2000, NEQ, Ed. 2

ARP 11071-1:2008/ISO/TR 11071-1:2004, IDT, Ed. 2

ARP 11071-2:2008/ISO/TR 11071-2:2006, IDT, Ed. 2

ARP 13425:2007/ISO/TR 13425:2006, IDT, Ed. 3

ARP 14799-1:2008/ISO/TR 14799-1:2005, IDT, Ed. 1

ARP 14799-2:2008/ISO/TR 14799-2:2005, IDT, Ed. 1

ARP 16764:2008/ISO/TR 16764:2003, IDT, Ed. 1

ARP 16765:2008/ISO/TR 16765:2003, IDT, Ed. 1

ARP 22399:2008/ISO/PAS 22399:2007, IDT, Ed. 1

ARP 23081-2:2008/ISO/TS 23081-2:2007, IDT, Ed. 1

ARP 24156:2009/ISO/TR 24156:2008, IDT, Ed. 1

ARP 60479-5:2008/IEC/TR 60479-5:2007, IDT, Ed. 1

CKS 0:1987

CKS 5:1981

CKS 8:1977

CKS 9:1994

CKS 23:1966

SANS Number

(ARP 4360)

(ARP 7812)

(CKS 0)

(CKS 5)

(CKS 8)

(CKS 9)

(CKS 23)


October 2009

3

2

4

2

2

4

3

2

2

2

2

2.01

1

1

2

2

2

3

5

2

3

Edition

Corrugated board containers

Packs for textile goods

Non-insulated stainless steel food containers (forsolid food, liquid food and water)

Insulated stainless steel food containers

Plastics book covers

Chalk writing boards for schools

Men's service type shoes (Goodyear welded withstuck-on and stitched outer soles)

Cleaning benzine

Paper bags

Galvanized mild steel hot water cylinders

Steel posts, stays, standards, and droppers forstrained wire fences

Aggregate for rapid gravity filters (Metric units)

Zinc coated steel buckets

Tinned steel milk buckets

Paper-cutting scissors for office use

Metal crutches for adults

Bell tents

Steel single divans, single folding beds, and doubledecker bunks

Colours for textiles

Paper-cutting scissors for school use

Wrapping paper

Title

CKS 24:1982

CKS 28:1973

CKS 30:1985

CKS 31:1972

CKS 33:1976

CKS 36:2004

CKS 61:1987

CKS 62:1970

CKS 67:1987

CKS 81:1971

CKS 82:1973

CKS 85:2002

CKS 93:1967

CKS 94:1967

CKS 97:1984

CKS 112:1972

CKS 119:1976

CKS 121:1980

CKS 129:1985

CKS 135:1984

CKS 136:1981

SANS Number

(CKS 24)

(CKS 28)

(CKS 30)

(CKS 31)

(CKS 33)

(CKS 36)

(CKS 61)

(CKS 62)

(CKS 67)

(CKS 81)

(CKS 82)

(CKS 85)

(CKS 93)

(CKS 94)

(CKS 97)

(CKS 112)

(CKS 119)

(CKS 121)

(CKS 129)

(CKS 135)

(CKS 136)


October 2009

2

1.02

1.02

1.02

3

4

2

2

2

2

2.02

2

2.02

1.02

2

2

1

1

3

3.01

3

Edition

Punch cards

Custard powder

Meat extract

Baking powder

Light fuel oil

Heavy fuel oil

Coated fabrics

Gates, steel, with tubular frames (for farm anddomestic use)

Total back-extension harness

Drinking mugs (stainless steel)

Bowl stands

Non-metallic sanitary pails

Mosquito nets (single-bed size)

Mustard powder

Paper serviettes

Adjustable spanners

8-ml Containers for freeze-dried vaccines

Rubber bands

Plastics interscrews

Drip stands (for saline solutions and other fluids)

Drug/poison cabinets

Title

CKS 137:1971

CKS 138:2009

CKS 139:2009

CKS 140:2009

CKS 141:1978

CKS 142:1989

CKS 143:1972

CKS 146:1972

CKS 155:1972

CKS 156:1972

CKS 157:2009

CKS 160:1971

CKS 161:2002

CKS 163:2009

CKS 167:1971

CKS 168:1972

CKS 174:1969

CKS 177:1969

CKS 178:1985

CKS 179:2009

CKS 181:1993

SANS Number

(CKS 137)

(CKS 138)

(CKS 139)

(CKS 140)

(CKS 141)

(CKS 142)

(CKS 143)

(CKS 146)

(CKS 155)

(CKS 156)

(CKS 157)

(CKS 160)

(CKS 161)

(CKS 163)

(CKS 167)

(CKS 168)

(CKS 174)

(CKS 177)

(CKS 178)

(CKS 179)

(CKS 181)


October 2009

1

3.01

2

2

1

1

1

1

2

1

1

1

1

1

1.02

2

1

2

2

1.01

1.02

Edition

Inflatable splints (polyvinyl chloride)

Shorts

Printed, side upper leather

Medicine spoon (plastics)

Sodium metasilicate pentahydrate, technical

Power kerosene

Tents, hip-roof type

Hospital bed sheeting (rubber-proofed)

Rubber bungs

Autoclave indicator tape

Envelopes for X-ray films

Barriers for bridges (traffic and pedestrian)

Cut steel wire shot

Swab racks

Bassinets (cribs) with stands

Weighing scales for patients (doctor's type)

Commodes (wheel chair type)

Baby weighing scales (counter design)

Mayo's tables

Tea trolleys

Examination couches

Title

CKS 183:1969

CKS 188:2002

CKS 190:1973

CKS 209:1977

CKS 214:1970

CKS 215:1970

CKS 216:1970

CKS 218:1970

CKS 221:1974

CKS 224:1970

CKS 225:1970

CKS 230:1970

CKS 231:1970

CKS 232:1970

CKS 237:2009

CKS 238:1980

CKS 239:1970

CKS 240:1978

CKS 241:1985

CKS 242:2009

CKS 243:2009

SANS Number

(CKS 183)

(CKS 188)

(CKS 190)

(CKS 209)

(CKS 214)

(CKS 215)

(CKS 216)

(CKS 218)

(CKS 221)

(CKS 224)

(CKS 225)

(CKS 230)

(CKS 231)

(CKS 232)

(CKS 237)

(CKS 238)

(CKS 239)

(CKS 240)

(CKS 241)

(CKS 242)

(CKS 243)


October 2009

2

1

1

2

1

1

1.01

1.02

1.02

2

1

1

1

1.02

2.02

2

1

1

2.02

2.01

1

Edition

Masking tape

General requirements for brushware

High speed steel tool bits

Waste-paper baskets for office use

Staples for office use

Paper clips

Jelly crystals

Clamps for hospital beds

Extension rods for hospital beds

Lifting poles for patients

Rubber hot water bottles

Dispensers for paper towels

Fish protein concentrate for human consumption

Magou powder (fortified)

Soup powder and gravy powder

Diaries

WC Seats

Foundry sand

Women's workwear

Umbilical cord fasteners

Clinical thermometers

Title

CKS 245:1999

CKS 250:1970

CKS 251:1970

CKS 253:1977

CKS 259:1970

CKS 260:1970

CKS 261:2009

CKS 263:2009

CKS 265:2009

CKS 266:1991

CKS 282:1971

CKS 285:1971

CKS 286:1971

CKS 289:2007

CKS 290:2008

CKS 301:1981

CKS 302:1971

CKS 305:1971

CKS 311:2004

CKS 312:2009

CKS 317:1972

SANS Number

(CKS 245)

(CKS 250)

(CKS 251)

(CKS 253)

(CKS 259)

(CKS 260)

(CKS 261)

(CKS 263)

(CKS 265)

(CKS 266)

(CKS 282)

(CKS 285)

(CKS 286)

(CKS 289)

(CKS 290)

(CKS 301)

(CKS 302)

(CKS 305)

(CKS 311)

(CKS 312)

(CKS 317)


October 2009

1

1

2

2.01

1

1

2.01

2

1.02

1

1.02

2

1

1

1

1

1

1.02

1.01

1

1

Edition

Base fabrics (suitable for coating)

Coated abrasives

Elastic mesh tubular bandages

Mortuary trolleys

Steel wool

Burglar-resisting bars for steel frames of ventilatingtype windows

Peanut butter

Plastics refuse bags (disposable)

Orthopaedic traction-pieces and hangers

Punch tape

Guard rails for hospital beds

Non-automated sphygmomanometers, aneroid andmercury

Oil filter elements (full flow design)

Lever arch files for stationery

Springback binders for stationery

Adjustable steel shelving

Adjustable wooden shelving

Recovery beds (X-ray type)

Leg and body cradles

Rubber waterstops

Flexible polyvinyl chloride waterstops

Title

CKS 319:1972

CKS 324:1972

CKS 330:1993

CKS 336:2008

CKS 337:1972

CKS 338:1972

CKS 339:2009

CKS 340:1979

CKS 343:2009

CKS 348:1972

CKS 350:2009

CKS 352:2002

CKS 367:1973

CKS 368:1973

CKS 369:1973

CKS 370:1973

CKS 371:1973

CKS 373:2009

CKS 374:2009

CKS 388:1973

CKS 389:1973

SANS Number

(CKS 319)

(CKS 324)

(CKS 330)

(CKS 336)

(CKS 337)

(CKS 338)

(CKS 339)

(CKS 340)

(CKS 343)

(CKS 348)

(CKS 350)

(CKS 352)

(CKS 367)

(CKS 368)

(CKS 369)

(CKS 370)

(CKS 371)

(CKS 373)

(CKS 374)

(CKS 388)

(CKS 389)


October 2009

2.02

1

1

1.01

1.01

1

1

2

2

1

2.01

1

1

1.01

1

1.01

2

1

1.02

3

3

Edition

Orthopaedic beds

Camp folding beds

Electrically-heated incubators for infants

Elastic-sided chelsea boots (Goodyear weltedconstruction) (Metric units)

Firemen's top boots

Adjustable glass-louvred windows

Boxboard filing boxes

Typing stencils for duplicating machines

Coffins and caskets

Physical properties of moulded rubber and plasticssoles, heels, and heel top-pieces

High-low beds

Plastics (polyolefin) containers for general use inhospitals

Anti-intruder fences

Medical forceps (other than tooth-extracting forceps)

Desks

Protein, vitamin, mineral (PVM) supplementary foodmixture

Disinfectant for use in urinals and toilets

Vulcanized rubber products

Orthopaedic flannelette bandages

Non-body-worn urinary drainage bags

Nonwoven surgical dressings

Title

CKS 390:2009

CKS 404:1974

CKS 408:1974

CKS 411:2001

CKS 412:2001

CKS 413:1974

CKS 427:1974

CKS 431:1979

CKS 440:1993

CKS 446:1978

CKS 447:2009

CKS 449:1976

CKS 451:1976

CKS 456:2009

CKS 457:1976

CKS 458:2008

CKS 459:1982

CKS 461:1976

CKS 462:2009

CKS 463:1995

CKS 464:1993

SANS Number

(CKS 390)

(CKS 404)

(CKS 408)

(CKS 411)

(CKS 412)

(CKS 413)

(CKS 427)

(CKS 431)

(CKS 440)

(CKS 446)

(CKS 447)

(CKS 449)

(CKS 451)

(CKS 456)

(CKS 457)

(CKS 458)

(CKS 459)

(CKS 461)

(CKS 462)

(CKS 463)

(CKS 464)


October 2009

1

1.01

1.01

1

1.01

1

1

1

3

1

1

1

1

1.01

1

1

1

1

1

1

1

Edition

Steel office pins

Tooth-extracting forceps

Medical scissors

Side upper leather (with a smooth corrected grain)

Grain sorghum malt

Duplicator paper (groundwood grade)

Laminated softwood sleepers and crossing timbers

Vertical plan-filing cabinets

Field dress material (polyester-and-cotton)

EPDM-styrene rubber sheet (for waterproofing)

Laminated softwood floorboards for freight containerflooring

Recommended yarn linear densities (cottonindustry)

Coal tar fuels

Leather medicine balls

Rubber and plastics sports balls (medicine, medau,and gymnastics)

Fire extinguishing agent: aqueous-film-forming-foamconcentrate

Industrial safety spectacles for general use

Unproofed core-spun ducks

Processed core-spun ducks

Mobile medicine (utility drug) cabinet

Plastics nursery planting bags

Title

CKS 467:1976

CKS 468:2009

CKS 469:2009

CKS 471:1976

CKS 479:2007

CKS 482:1977

CKS 484:1977

CKS 487:1977

CKS 488:2008

CKS 489:1977

CKS 490:1978

CKS 500:1978

CKS 503:1978

CKS 516:2002

CKS 517:1978

CKS 532:1979

CKS 552:1980

CKS 553:1980

CKS 554:1980

CKS 556:1981

CKS 559:1981

SANS Number

(CKS 467)

(CKS 468)

(CKS 469)

(CKS 471)

(CKS 479)

(CKS 482)

(CKS 484)

(CKS 487)

(CKS 488)

(CKS 489)

(CKS 490)

(CKS 500)

(CKS 503)

(CKS 516)

(CKS 517)

(CKS 532)

(CKS 552)

(CKS 553)

(CKS 554)

(CKS 556)

(CKS 559)


October 2009

1

1

1

2

1

1.01

1

1

1

2.01

1

1.01

1.01

1

2

1

1.03

1.02

1.02

2.01

1.03

Edition

Mosquito netting

Special requirements for resin-treated cellulosicfabrics

Trichloroisocyanurate tablets

Scholastic stationery

Pressure regulators for medical gases

Target repair stickers, self-adhesive type

Bond paper

Paper for letterpress printing

Paper for offset lithographic printing

Bed tilting devices

Foam mattresses for hospitals

Footstools for hospital use

Worcestershire sauce

Paper rolls for teleprinters

Anaesthetic machines

Fusible interlinings

Processed and low-flammable polyester canvas

Mayonnaise, salad cream and salad dressing

Polypropylene grain bags

Textured soya protein foodstuffs

Adjustable ward beds

Title

CKS 562:1982

CKS 583:1983

CKS 587:1983

CKS 596:1998

CKS 605:1987

CKS 609:2004

CKS 610:1986

CKS 611:1987

CKS 612:1987

CKS 613:2009

CKS 615:1991

CKS 617:2009

CKS 618:2009

CKS 622:1990

CKS 624:1991

CKS 627:1987

CKS 629:2002

CKS 630:2009

CKS 632:2001

CKS 633:2008

CKS 635:2009

SANS Number

(CKS 562)

(CKS 583)

(CKS 587)

(CKS 596)

(CKS 605)

(CKS 609)

(CKS 610)

(CKS 611)

(CKS 612)

(CKS 613)

(CKS 615)

(CKS 617)

(CKS 618)

(CKS 622)

(CKS 624)

(CKS 627)

(CKS 629)

(CKS 630)

(CKS 632)

(CKS 633)

(CKS 635)


October 2009

1

1.01

1

1

1.01

1

1

1

1

1

1

1

1

1.01

1

1

1

2

2

1.01

Edition

Tents (Hip-roof, cottage, bow and bell types)

Orthopaedic cord

Elasticated tubular bandages

Transparency films for use in photocopiers

Dehydrated vegetables

Facsimile paper

Elasticated, disposable diapers

Non-woven cleaning wipes

Fanfold Stationery

Film carbon

Office staplers

Carbonless copy paper

DDT wettable powder for malaria vector control

Disposable non-woven laminated surgical fabrics

Portable steam sterilizers for unwrapped instrumentsand utensils

Disposable spun-laced surgical fabric

NRS definitions Part 2: Electricity pricing

Code of practice for the drafting and presentation ofspecifications

Graphical symbols for electrical diagrams

Metal-clad switchgear - For rated a.c. voltagesabove 1 kV and up to and including 24 kV Part 2:Standardized panels

Title

CKS 637:1992

CKS 638:2001

CKS 641:1993

CKS 643:1993

CKS 646:2009

CKS 647:1996

CKS 648:2002

CKS 649:1999

CKS 653:1998

CKS 668:1987

CKS 672:1988

CKS 673:1989

CKS 675:1990

CKS 676:2005

CKS 677:1990

CKS 679:2002

NRS 000-2:2009

NRS 001:2004

NRS 002:2000

NRS 003-2:1996

SANS Number

(CKS 637)

(CKS 638)

(CKS 641)

(CKS 643)

(CKS 646)

(CKS 647)

(CKS 648)

(CKS 649)

(CKS 653)

(CKS 668)

(CKS 672)

(CKS 673)

(CKS 675)

(CKS 676)

(CKS 677)

(CKS 679)

(NRS 001)

(NRS 002)

(NRS 003-2)


October 2009

1

1

1

1

1

1.01

1

1

1

1

1

1.01

2.02

1

1

1

1

2

Edition

Electricity sales systems Part 2: Functional andperformance requirements Section 1: Systemmaster stations

Electricity sales systems Part 2: Functional andperformance requirements Section 2: Creditdispensing units

Electricity sales systems Part 2: Functional andperformance requirements Section 3: Securitymodule

Electricity sales systems Part 2: Functional andperformance requirements Section 4: Standardtoken translators

Electricity sales systems Part 2: Functional andperformance requirements Section 5: Error handling

Electrical sales systems Part 3: Database format

Electricity sales systems Part 4: Nationalprepayment electricity meter cards

Electricity sales systems Part 5: Testing ofsubsystems

Electricity sales systems Part 6: Interface standards- Section 1: Credit dispensing unit - Standard tokentranslator interface

Electricity sales systems Part 6: Interface standardsSection 3: System master station - Credit dispensingunit

Electrical sales systems Part 6: Interface standardsSection 4: Data transfer by physical media - Systemmaster station - Credit dispensing unit

Electricity sales systems Part 6: Interface standardsSection 6: Standard transfer specification/Creditdispensing unit - Electricity dispenser - Categories oftoken and transaction data fields

Electricity sales systems Part 6: Interface standardsSection 7: Standard transfer specification/ Creditdispensing unit - Electricity dispenser - Tokenencoding and data encryption and decryption

Electricity sales systems Part 6: Interface standardsSection 8: Standard transferspecification/Disposable magnetic token technology- Token encoding format and physical tokendefinition

Electricity sales systems Part 6: Interface standardsSection 9: Standard transfer specification/Numerictoken technology - Token encoding format andphysical token definition

Electricity sales systems Part 7: Standard transferspecification/ The management of cryptographickeys

Electricity sales sytems Part 8: The management ofsecure modules

Pilot cables

Title

NRS 009-2-1:1998

NRS 009-2-2:1995

NRS 009-2-3:1998

NRS 009-2-4:1997

NRS 009-2-5:1997

NRS 009-3:2001

NRS 009-4:2005

NRS 009-5:1998

NRS 009-6-1:1997

NRS 009-6-3:1997

NRS 009-6-4:1998

NRS 009-6-6:2002

NRS 009-6-7:2002

NRS 009-6-8:1997

NRS 009-6-9:1997

NRS 009-7:1999

NRS 009-8:2005

NRS 011:2001

SANS Number

(NRS 009-2-1)

(NRS 009-2-2)

(NRS 009-2-3)

(NRS 009-2-4)

(NRS 009-2-5)

(NRS 009-3)

(NRS 009-4)

(NRS 009-5)

(NRS 009-6-1)

(NRS 009-6-3)

(NRS 009-6-4)

(NRS 009-6-6)

(NRS 009-6-7)

(NRS 009-6-8)

(NRS 009-6-9)

(NRS 009-7)

(NRS 009-8)

(NRS 011)


October 2009

3

1.01

1

1

1

1

2.01

3

1

1

1

3

2

3

2

1

Edition

Medium-voltage cables

Fittings and connectors for low-voltage overheadpower lines using aerial bundled conductors Part 1:Strain and suspension fittings for self-supportingconductors

Fittings and connectors for low-voltage overheadpower lines using aerial bundled conductors Part 2:Strain and suspension fittings for insulated neutralsupporting conductors

Fittings and connectors for low-voltage overheadpower lines using aerial bundled conductors Part 3:Strain and suspension fittings for bare neutralsupporting conductors

Fittings and connectors for low-voltage overheadpower lines using aerial bundled conductors Part 4:Strain and suspension fittings for aerial servicecables

Fittings and connectors for low-voltage overheadpower lines using aerial bundled conductors Part 5:Current-carrying connectors and joints

Electricity distribution - Cable ties for use with lowvoltage aerial bundled conductors

Electricity distribution - Stays and associatedcomponents

Diesel alternator sets Part 1: Diesel alternator setsfor fixed installations - Preferred requirements forapplications in their organizations by the dc andstandby equipment representative user group

Diesel alternator sets Part 2: Mobile or trailer-mounted diesel alternator sets - Preferredrequirements for applications in their organizationsby the DC and standby equipment representativeuser group

Cable lugs and ferrules for copper and aluminiumconductors

Current transformers for rated a.c. voltages from 3,6kV up to and including 420 kV (maximum voltage forequipment)

Electricity distribution - Inductive voltagetransformers for rated a.c. voltages from 3,6 kV upto and including 145 kV for indoor and outdoorapplications

Alternating current disconnectors and earthingswitches (up to 145 kV)

Service distribution boxes - Pole-mounted types -For overhead single-phase a.c. service connectionsat 230 V

Electricity distribution - Guidelines for the applicationdesign, planning and construction of mediumvoltage overhead power lines up to and including 22kV, using wooden pole structures and bareconductors

Title

NRS 013:2007

NRS 018-1:2002

NRS 018-2:1995

NRS 018-3:1995

NRS 018-4:1996

NRS 018-5:1996

NRS 020:2002

NRS 022:2008

NRS 024-1:1994

NRS 024-2:1994

NRS 028:1993/IEC 61238-1:1993, NEQ

NRS 029:2002

NRS 030:2001

NRS 031:2008

NRS 032:2001

NRS 033:1996

SANS Number

(NRS 013)

(NRS 018-1)

(NRS 018-2)

(NRS 018-3)

(NRS 018-4)

(NRS 018-5)

(NRS 020)

(NRS 022)

(NRS 024-1)

(NRS 024-2)

(NRS 028)

(NRS 029)

(NRS 030)

(NRS 031)

(NRS 032)

(NRS 033)


October 2009

1.02

3.03

1

2

2

2

2

2

2

2

1

2

2

2

2

1.01

Edition

Electricity distribution - Guidelines for the provisionof electrical distribution networks in residential areasPart 0: Definitions

Electricity distribution - Guidelines for the provisionof electrical distribution networks in residential areasPart 1: Planning and design of distribution systems

Electricity distribution - Guidelines for the provisionof electrical distribution networks in residential areasPart 2-3: Preferred methods and materials for theinstallation of overhead power lines

Electricity distribution - Guidelines for the provisionof electrical distribution networks in residential areasPart 3: Overhead distribution in very low, low andmoderate consumption areas, including rural areasand informal settlements

Outdoor distribution cut-outs Part 1: Drop-out fuse-link assemblies or solid-link assemblies - Pole-mounted types - For nominal a.c. voltages up to andincluding 33 kV

Outdoor distribution cut-outs Part 2: Expulsion fuse-links - For nominal a.c. voltages up to and including33 kV

Auto-reclosers and sectionalizers - Pole mountedtypes Part 1: Auto-reclosers with local and remotecontrol capabilities for nominal a.c. voltages up to 33kV

Auto-reclosers and sectionalizers - Pole mountedtypes Part 2: Auto-reclosers that haveprogrammable protection features and local controlfor nominal a.c. voltages of up to 33 kV

Auto-reclosers and sectionalizers - Pole-mountedtypes Part 3: Sectionalizers for nominal a.c. voltagesup to 33 kV

Telecontrol protocol Part 1: Telecontrol protocol forstand-alone remote terminal units

Telecontrol protocol Part 3: Intercontrol centrecommunications protocol

Electricity distribution - Concrete poles Part 1:Concrete poles for LV and MV overhead distributionsystems

Electricity distribution - Concrete poles Part 2:Concrete poles for lighting applications

Surge arresters for use in distribution systems Part1: Guide for the application of gapless metal-oxidesurge arresters

Surge arresters for use in distribution systems Part2: Distribution class, gapless metal-oxide surgearresters

High-voltage operating regulations Part 1:Definitions - Preferred definitions for systems,equipment and conditions relating to the generation,transmission and distribution of electricity

Title

NRS 034-0:2001

NRS 034-1:2001

NRS 034-2-3:1997

NRS 034-3:1999

NRS 035-1:2002/PIESA 002-1:2002, NEQ, Ed. 2

NRS 035-2:2002/PIESA 002-2:2002, NEQ, Ed. 2

NRS 036-1:2002

NRS 036-2:2004

NRS 036-3:2004

NRS 037-1:2006

NRS 037-3:2005

NRS 038-1:2007

NRS 038-2:2007

NRS 039-1:2008

NRS 039-2:2008

NRS 040-1:1999

SANS Number

(NRS 034-0)

(NRS 034-1)

(NRS 034-2-3)

(NRS 034-3)

(NRS 035-1)

(NRS 035-2)

(NRS 036-1)

(NRS 036-2)

(NRS 036-3)

(NRS 037-1)

(NRS 037-3)

(NRS 038-1)

(NRS 038-2)

(NRS 039-1)

(NRS 039-2)

(NRS 040-1)


October 2009

2

2

1

1

1.01

2

1

1.01

3

1.02

3

2

1

1

1

1

1

Edition

High-voltage operating regulations Part 2: Voltagecolour coding for diagrammatic displays in controlrooms - Colour coding for wall-mounted operatingdiagrams and electronic displays relating to thegeneration, transmission and distribution ofelectricity

High-voltage operating regulations Part 3: Modelregulations - Recommended model regulationsrelating to power systems for operating, accesscontrol and supervision of systems that exceed 1000 V, for the transmission and distribution ofelectricity

High-voltage operating regulations Part 5: Standardprocedure and terminology for the issuing ofoperating instructions

High-voltage operating instructions Part 6: Code ofpractice for earthing

Guide for the protection of electronic equipmentagainst damaging transients

Joint use of structures for power andtelecommunication lines

Working procedures and standards in respect of theinstallation of new electrical works andtelecommunication facilities, or the extension ormodification of such existing works and facilities

Electricity distribution - Load-break switch-disconnectors - Pole-mounted type for rated A.C.voltages above 1 kV and up to and including 36 kV

Electricity supply - Quality of service Part 1:Minimum standards

Electricity supply - Quality of service Part 2:Reporting guidelines

Electricity supply - Quality of supply Part 2: Voltagecharacteristics, compatibility levels, limits andassessment methods

Electricity supply - Quality of supply Part 4:Application practices for licencees

Electricity supply - Quality of supply Part 6:Measurement and reporting of medium-voltagenetwork interruption performance

Electricity supply - Quality of supply Part 8:Measurement and reporting of extra high voltage(EHV) and high voltage (HV) network interruptionperformance

Advanced Metering Infrastructure (AMI) forresidential and commercial customers

Suspension and strain fittings for insulated neutralsupporting conductors used in medium-voltageaerial bundled conductor systems

Photovoltaic systems for use in individual homesPart 1: Standard requirements applicable toindividual homes remote from the electricity grid

Title

NRS 040-2:2000

NRS 040-3:2002

NRS 040-5:2008

NRS 040-6:2009

NRS 042:2004

NRS 043:2005

NRS 044:2002

NRS 046:2002

NRS 047-1:2005

NRS 047-2:2001

NRS 048-2:2007

NRS 048-4:2009

NRS 048-6:2009

NRS 048-8:2009

NRS 049:2008

NRS 051:1999

NRS 052-1:1999

SANS Number

(NRS 040-2)

(NRS 040-3)

(NRS 042)

(NRS 043)

(NRS 044)

(NRS 046)

(NRS 047-1)

(NRS 047-2)

(NRS 048-2)

(NRS 048-4)

(NRS 049)

(NRS 051)

(NRS 052-1)


October 2009

1

1

1

1

1

2

1

2

1

1

1.01

2

1

1

1

1

1

1

1

1

Edition

Photovoltaic systems for use in individual homesPart 2: Test procedures for main componentsSection 1: Test procedures for photovoltaic modules

Photovoltaic systems for use in individual homesPart 2: Test procedures for main componentsSection 2: Test procedures for batteries

Photovoltaic systems for use in individual homesPart 2: Test procedures for main componentsSection 3: Test procedures for regulators

Photovoltaic systems for use in individual homesPart 2: Test procedures for main componentsSection 4: Test procedures for inverters

Photovoltaic systems for use in individual homesPart 2: Test procedures for main componentsSection 5: Test procedures for luminaires

Accessories for medium-voltage power cables(3,8/6,6 kV to 19/33 kV)

Power transformers

Code of practice for revenue protection

Service distribution boxes - Meter kiosks anddistribution kiosks Part 1: Low-voltage non-steelmeter kiosks for use in underground networks

Service distribution boxes - Meter kiosks anddistribution kiosks Part 2: Specification for ground-mounted, low-voltage distribution kiosks

Recommendations to minimize problems associatedwith the theft of transformer neutral and neutralearthing copper conductors

Code of practice for clearances for electricalsystems with rated voltages up to and including 145kV, for the safety of persons

Specification for overhead ground wire with opticalfibre Part 1: Product specification

Specification for overhead ground wire with opticalfibre Part 2: Installation guidelines

Guidelines for the exchange of spatial information inthe Electricity Supply Industry

Medium-voltage insulators

Electricity distribution - Cable earth fault indicator

Code of practice for the recovery of capital costs fordistribution network assets

Quality of service standard for non-grid electricitycustomers

Overhead line fault path indicators

Title

NRS 052-2-1:1999

NRS 052-2-2:1999

NRS 052-2-3:1999

NRS 052-2-4:1999

NRS 052-2-5:1999

NRS 053:2008

NRS 054:2002

NRS 055:2007

NRS 056-1:2005

NRS 056-2:2004

NRS 059:2002

NRS 060:2005

NRS 061-1:2002

NRS 061-2:2004

NRS 064:2005

NRS 066:2002

NRS 068:2002

NRS 069:2004

NRS 070:2004

NRS 072:2003

SANS Number

(NRS 052-2-1)

(NRS 052-2-2)

(NRS 052-2-3)

(NRS 052-2-4)

(NRS 052-2-5)

(NRS 053)

(NRS 054)

(NRS 055)

(NRS 056-1)

(NRS 056-2)

(NRS 059)

(NRS 060)

(NRS 061-1)

(NRS 061-2)

(NRS 064)

(NRS 066)

(NRS 068)

(NRS 070)

(NRS 072)


October 2009

1

2

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Wood poles, cross-arms and spacer blocks

Low-voltage (600/1 000 V) cable systems forunderground electrical distribution Part 1: Cables

Mechanical torque shear connectors

Earthing of distribution substations with nominalvoltages up to and including 132 kV

XLPE-insulated cables and accessories for systemswith nominal voltages of 44 kV, 66 kV, 88 kV and132 kV

Long-span all-dielectric self-supporting fibre opticcables Part 1: Product specification

Long-span all-dielectric self-supporting fibre opticcables Part 2: Installation guidelines

Mineral insulating oils (uninhibited) Part 1:Purchase, management, maintenance and testing

Quantifying and reporting of energy losses inelectricity distribution networks

Single-mode non-dispersion shifted optical fibres

Recommended maintenance policy for electricitynetworks

Code of practice for the application ofelectromagnetic compatibility (EMC) standards andguidelines in electricity utility networks Part 1:Equipment standards

Guidelines for the management of SF6 (sulfurhexafluoride) for use in electrical equipment

Duct and direct-buried underground fibre-optic cablePart 1: Product specification

Maintenance of electricity networks Part 5: Streetlighting and high masts Section 1: Maintenance ofstreet lighting and high masts

Asset management of electricity infrastructure Part1: Minimum requirements for asset management inthe South African Electricity Distribution Industry

Electricity metering - Ancillary specifications Part 1:The sealing of electricity meters

Guidelines for the installation and safe use ofportable generators on utilities' networks

NRS definitions Part 1: Compilation of NRS andother definitions used in the Electricity SupplyIndustry

Title

NRS 073:2008

NRS 074-1:2005

NRS 075:2004

NRS 076:2005

NRS 077:2005

NRS 078-1:2004

NRS 078-2:2005

NRS 079-1:2004

NRS 080:2004

NRS 081:2005

NRS 082:2004

NRS 083-1:2007

NRS 087:2008

NRS 088-1:2007

NRS 089-5-1:2009

NRS 093-1:2009

NRS 096-1:2007

NRS 098:2009

NRS 000-1:2008

SANS Number

(NRS 074-1)

(NRS 075)

(NRS 076)

(NRS 077)

(NRS 078-1)

(NRS 078-2)

(NRS 079-1)

(NRS 080)

(NRS 081)

(NRS 082)


October 2009

1

1

1

1

1

2

1

1

1

1

1

1

1

1

1

1

1

1

Edition

Outdoor distribution cut-outs Part 1: Drop-out fuse-link assemblies or solid-link assemblies - Pole-mounted types. For nominal a.c. voltages up to andincluding 33 kV

Outdoor distribution cut-outs Part 2: Expulsion fuse-links. For nominal a.c. voltages up to and including33 kV

Low-voltage (600/1 000 V) cable systems forunderground electrical distribution Part 1: Cables

Low-voltage (600/1 000 V) cable systems forunderground electrical distribution Part 2:Accessories

Low-voltage (600/1 000 V) cable systems forunderground electrical distribution Part 2: Code ofpractice

Wood poles, cross-arms and spacer blocks

Low voltage (600/1 000 V) cable systems foroverhead electrical distribution Part 1: Cables

Low voltage (600/1 000 V) cable systems foroverhead electrical distribution Part 2: Accessories

Low voltage (600/1 000 V) cable systems foroverhead electrical distribution Part 3: Applicationguide

Distribution transformers of size up to and including500 kVA and operating at nominal voltages notexceeding 33 kV

Electricity distribution - Stays and associatedcomponents

Switchgear - Metal-enclosed ring main units forrated A.C. voltages above 1 kV and up to andincluding 24 kV

Metal-clad switchgear for rated A.C. voltages above1 kV and up to and including 36 kV - Generalrequirements and methods of test

Cable terminations and live conductors within air-insulated enclosures (insulation co-ordination) forrated a.c. voltages of 7,2 kV and up to and including36 kV

Fittings and connectors for low-voltage overheadpower lines using aerial bundled conductors Part 2:Strain and suspension fittings for insulated neutralsupporting conductors

Fittings and connectors for low-voltage overheadpower lines using aerial bundled conductors Part 3:Strain and suspension fittings for bare neutralsupport conductors

Fittings and connectors for low voltage overheadpower lines using aerial bundled conductors Part 4:Strain and suspension fittings for aerial servicecables

Fittings and connectors for low voltage overheadpower lines using aerial bundled conductors Part 5:Current-carrying connectors and joints

Title

PIESA 002-1:2000

PIESA 002-2:2002

PIESA 003-1:2001

PIESA 003-2:2002

PIESA 003-3:2002

PIESA 1001:2004

PIESA 1004-1:2004

PIESA 1004-2:2004

PIESA 1004-3:2005

PIESA 1006:2004

PIESA 1007:2004

PIESA 1009:2005/SANS 1874:2005, MOD, Ed. 1.01

PIESA 1010:2005/SANS 1885:2004, MOD, Ed. 1.01

PIESA 1012:2004/NRS 012:2002, MOD, Ed. 1

PIESA 1018-2:2004

PIESA 1018-3:2004

PIESA 1018-4:2004

PIESA 1018-5:2004

SANS Number

(PIESA 1001)

(PIESA 1004-1)

(PIESA 1004-2)

(PIESA 1004-3)

(PIESA 1006)

(PIESA 1007)

(PIESA 1009)

(PIESA 1010)

(PIESA 1012)

(PIESA 1018-2)

(PIESA 1018-3)

(PIESA 1018-4)

(PIESA 1018-5)


October 2009

1

1

1

1

1

1

2

3

2

3

3

2

3

2

3

3

3

1

7

5

Edition

Electricity distribution - Cable ties for use with low-voltage aerial bundled conductors

Service distribution boxes - Pole-mounted types foroverhead single-phase a.c. service connections at230 V

Electricity supply - Quality of supply - Voltagecharacteristics, compatibility levels, limits andassessment methods

Split-concentric single-phase aerial service cable -for domestic service connections with separateneutral and earth conductors

Corrosion protection of new mild steel fabricatedequipment

Electricity payment systems - Prepayment passiveunits

Manually operated switches for fixed installations

Safety of flexible cords for electrical appliances

Plugs, socket-outlets and socket-outlet adaptors

Lampholders

Appliance couplers

Hydraulic brake and clutch fluid

The manufacture, production, processing andtreatment of canned fish, canned marine molluscsand canned crustaceans

Safety helmets for motor cyclists

Frozen fish, frozen marine molluscs and frozenproducts derived therefrom

The manufacture, production, processing andtreatment of canned meat products

Frozen rock lobster and frozen lobster productsderived therefrom

Smoked snoek

Compulsory specification for motor vehicles ofcategory M1

Compulsory specification for motor vehicles ofcategory M2 and M3

Title

PIESA 1020:2004

PIESA 1032:2004

PIESA 1048:2008

PIESA 1063:2005

PIESA 1102:2004

PIESA 1106:2006

VC 8003:1998

VC 8006:1995

VC 8008:1998

VC 8011:1999

VC 8012:1998

VC 8013:1975

VC 8014:2004

VC 8016:1984

VC 8017:2003

VC 8019:2004

VC 8020:2003

VC 8021:1974

VC 8022:2008

VC 8023:2005

SANS Number

(PIESA 1020)

(PIESA 1032)

(PIESA 1063)

(PIESA 1102)

(VC 8003)

(VC 8006)

(VC 8008)

(VC 8011)

(VC 8012)

(VC 8013)

(VC 8014)

(VC 8016)

(VC 8017)

(VC 8019)

(VC 8020)

(VC 8021)

(VC 8022)

(VC 8023)


October 2009

6

5

4

5

1

3

1

2

3

1

1

3

1

2

2

1

1

1

1

1

2

Edition

Compulsory specification for motor vehicles ofcategory N1

Compulsory specification for motor vehicles ofcategory N2 and N3

Category O1 and O2 vehicles (caravans and lighttrailers)

Compulsory specification for vehicles of category O3and O4

Firearms for civil use

Cord sets and cord extension sets

Frozen shrimps (prawns), langoustines and crabs

Personal flotation aids

Child restraints for use in motor vehicles

Coal-burning stoves and heaters for use in adwelling

Earth leakage protection units

Circuit-breakers

The safety of starters for tubular fluorescent lamps

Microbiological safety cabinets (Classes I, II and III)

Incandescent lamps

Replacement incandescent lamps for motor vehicles

Replacement headlights for motor vehicles

Replacement secondary lights for motor vehicles

Replacement safety glass for use in road vehicles

Manually operated switches for appliances

Replacement brake lining assemblies for roadvehicles

Title

VC 8024:2008

VC 8025:2005

VC 8026:2004

VC 8027:2008

VC 8028:1976

VC 8029:2005

VC 8031:1987

VC 8032:2009

VC 8033:2003/ECE R44:1998, MOD, Ed. 2

VC 8034:1982

VC 8035:1987

VC 8036:2006

VC 8039:1989

VC 8041:2001

VC 8043:2005

VC 8048:1996

VC 8049:1997

VC 8050:1996

VC 8051:1995

VC 8052:1998

VC 8053:2001

SANS Number

(VC 8024)

(VC 8025)

(VC 8026)

(VC 8027)

(VC 8028)

(VC 8029)

(VC 8031)

(VC 8032)

(VC 8033)

(VC 8034)

(VC 8035)

(VC 8036)

(VC 8039)

(VC 8041)

(VC 8043)

(VC 8048)

(VC 8049)

(VC 8050)

(VC 8051)

(VC 8052)

(VC 8053)


October 2009

1

2

2

2

2

1

1

1

1

2

1

1

1

1

1

1

1

1

1

Edition

Disinfectants and detergent-disinfectants

Electrical and electronic apparatus

Compulsory specification for pneumatic tyres forpassenger cars and trailers

Agricultural tractors

Compulsory specification for pneumatic tyres forcommercial vehicles and their trailers

Retro-reflective number plates for motor vehicles

Ball type couplings and towing brackets for towingcaravans and light trailers

Compulsory specification for respirators

Breathing apparatus

Compulsory specification for the safety of electriccables with extruded solid dielectric insulation forfixed installations (300/500 V to 1 900/3 300 V)

Compulsory specification for the safety of lighters

Safety of medium-voltage electric cables

Compulsory specification for material for contourmarking on motor vehicles

Compulsory specification for the control of gamingdevices and related apparatus

Replacement elastomeric cups and seals forhydraulic brake actuating cylinders for use in motorvehicles using non-petroleum base hydraulic brakefluid (service temperature 70 °C to 150 °C max)

Compulsory specification for plastic carrier bags andflat bags

Compulsory specification for cement

Compulsory specification for lamp controlgear

Compulsory specification for small arms shootingranges

Compulsory specification for non-pressure paraffinstoves and heaters

Title

VC 8054:1999

VC 8055:2009

VC 8056:2001

VC 8057:2004

VC 8059:2001

VC 8062:1998

VC 8065:2002

VC 8072:2003

VC 8073:2003

VC 8075:2003

VC 8076:2002

VC 8077:2003

VC 8078:2003

VC 8079:2003

VC 8080:2005

VC 8087:2003

VC 9085:2007

VC 9087:2009

VC 9088:2004

VC 9089:2006

SANS Number

(VC 8054)

(VC 8055)

(VC 8056)

(VC 8057)

(VC 8059)

(VC 8062)

(VC 8065)

(VC 8072)

(VC 8073)

(VC 8075)

(VC 8076)

(VC 8077)

(VC 8078)

(VC 8079)

(VC 8080)

(VC 8087)

(VC 9088)


October 2009

1

1

1

Edition

Compulsory specification for swimming aids

Preservative treatment of timber

US Emergency Response Guide Book

Title

VC 9090:2009

VC 9101:2009

US-ERGB:2008

SANS Number

Sabs & Sans List of Codes

Documents

Transcript of Sabs & Sans List of Codes