S uperMicro- S erver
Transcript of S uperMicro- S erver
DatasheetSuperMicro-Server
2 of 3
Mechanical
Hardware
Dimensions 432 x 43 x 650 mm (17 x 1.69 x 25.59")
Weight 18.48 kg (40.75 lb)
Mount (2) Rail kits for rack mount (included)
Accessory (2) Power cords (included)
Processor (2) Intel Xeon Bronze 3204, 6 core, 1.9GHz
Memory (2) 16 GB DDR4 DIMM (included)
(12) DIMM slots
Storage (4) 3.5" SATA HDDs
(1) NVMe M.2 2280 256G
Max. power consumption 700/750W
Power method (2) Universal AC inputs, 100-240VAC
Power supply DC Output, +3.3V (25A), +5V (25A), +12V (700W: 58A at 100-140V, 750W: 62A at 180-240V), -12V (0.6A),
+5Vsb (3A)
PWS-706P-1R
Power output (2) 700/750W PSUs providing redundant power
Supported voltage range 100 to 240VAC
Connectivity (4) USB 3.0 ports**data transmission only
Management interfaces Ethernet
Management controller ASPEED AST2500
Networking interfaces (1) 1 GbE RJ45 management port
(2) LAN: 1 GbE RJ45 ports
SFP interfaces (2) LAN: 25G SFP28 ports
Buttons Factory reset
UID
Power
Security Each system comes with a unique default password for the ADMIN user. This can be found on a sticker on the
motherboard and a sticker underneath the service tag on chassis. If necessary the password can be reset by
the Supermicro IPMICFG tool
Operating temperature 5 to 35° C (41 to 95° F)
Operating humidity 8 - 90% noncondensing
SMC ServerHigh-performance server with (2) 25GbE SFP28 ports and (12) total DIMM slots, including (2)16 GB DDR4 DIMM
RAM modules.
The SuperMicro Server (SMC Server; Model 6019P-WT) is equipped with (2) 1.9 GHz Intel Xeon-SP Bronze 3204
six-core processors, 32 GB of pre-con�gured RAM [(2) 16 GB DDR4 DIMM RAM modules], and (10) additional,
open DIMM slots. The 1U-sized, rack-mountable SMC Server is also TPM2.0-supported and has an
accommodating storage bay that can house up to (4) 3.5" SATA HDDs with RAID con�gurations (sold separately).
Additionally, the SMC Server offers a versatile networking interface comprised of (2) 25GbE SFP28 ports, (2)
10GbE RJ45 ports, (1) GbE RJ45 port, and (4) USB 3.0 ports. It can also provide impressive power redundancy
with its (2) 750W PSUs.
Specifications are subject to change. Ubiquiti products are sold with a limited warranty described at: www.ui.com/support/warranty
©2021 Ubiquiti Inc. All rights reserved. Ubiquiti and the Ubiquiti U logo are trademarks or registered trademarks of Ubiquiti Inc. in the United States and in other countries. All other trademarks are theproperty of their respective owners.
LEDs
Information Continuously on and red: an overheat condition has occurred. (This may be caused by cable congestion.)
Blinking red (1Hz): fan failure, check for an inoperative fan
Blinking red (0.25Hz): power failure, check for an inoperative power supply
Solid blue: local UID has been activated. Use this function to locate the server in a rackmount environment
Blinking blue: remote UID is on. Use this function to identify the server from a remote location
Power Indicates power is being supplied to the system power supply. This LED should normally be illuminated when
the system is operating
NIC1 Indicates network activity on LAN port 1 when blinking
NIC2 Indicates network activity on LAN port 2 when blinking
HDD Indicates activity on a hard drive when blinking