Rough Construction June 2013

• Reduces energy costs by reflecting the sun’s heat due to the reflective properties of the steel finish

• Lightweight; weighs one third of a traditional roofing materials

• Colour matched flashings & accessories for a complete roof system

• Carton packed for easy handling

• Made in Canada

A lasting, cost-effective solution:SummersideTM Shingles are supported by a Lifetime LimitedTransferable Warranty. They will outlast traditional shingleswhich commonly need to be replaced every 15 years or less,saving you money in the long run.

Increases your home’s value: SummersideTM Steel Shingles are a long-lasting roofing solutionthat enhances the appearance and will add value to your home.

Lighter weight: Much lighter than all other roofing materials, SummersideTM steel roofs actually ease the stress on a home's structure. Clay or slate often require structural reinforcement resulting in the expenditure of thousands of extra dollars.

Energy efficient: SummersideTM finishes actually reflectthe light from the sun, keeping your home or cottage cooler inthe summer and greatly reducing your energy costs.

Fire & weather resistant: SummersideTM Steel Shingles interlock on all four sides and stand up to hail, fire and high winds. They'll even hold true in earthquake prone areas.

Quick & easy to install: The interlocking design allows for fast, easy installation and flexibility. SummersideTM

Steel Shingles can be installed over existing shingles (wherebuilding codes allow), thus reducing labour costs.

Environmental factors: In addition to reducing landfill whenre-roofing over previous shingles, SummersideTM Shingles aremanufactured with recycled steel and are 100% recyclable.

For complete details on accessories, samples and installationprocedures ask your local Castle Building Centre retailer.

v i c w e s t . c o m

SummersideTM Steel Shingles: a complete roofing systemSummersideTM Steel Shingles are designed to outlast and outperform traditional roofing materials. They are precision engineered from 28 gauge steel with a double embossed finish, so they're stronger than most other steel shingle roofing systems. The unique four way interlocking system tightens on all four sides to resist wind uplift and heavy snowloads. And because they are non-combustible, the steel panelscannot catch fire.

SummersideTM Steel Shingles are designed to last. And, whiletraditional shingles are lower in initial cost, they have a very limited lifespan compared to steel.

Combining the rustic appearance of cedar with the strength of steel, SummersideTM Steel Shingles are available in an assortment of natural colours to enhance and compliment the look of your home.

Features and Benefits:

• Durable; made with tough 28 gauge, double embossed steel

• Unique, simple interlocking system allows for faster installation time

• Will not rot, crack, burn or fade

• Where building codes allow, SummersideTM Shingles can be installed directly over most traditional roofing materials, reducing install time and eliminating landfill waste

NewSummersideTM SteelShingles.

Strength,beautyandaffordableprotectionforyourhome.

SummersideTM Steel Shingles are designed to outlast and outperform traditional roofing materials. They are precision engineered from 28 gauge steel with a double embossed finish, so they're stronger than most other steel shingle roofing systems. The unique four way interlocking system allows for quick installation and tightens on all four sides to resist wind uplift and heavy snow loads. Ask for SummersideTM Steel Shingles at your local Castle Building Centre.


VW Summerside Rough Const Advetorial_Layout 1 2013-06-05 4:44 PM ROUGH

insulation • weather protection • waterproofing • siding • roofing • toolsCONSTRUCTION

®

YOUR BLUEPRINT TO A COZY, ENERGY-EFFICIENT HOME STARTS WITH PINK.

Quality design and stylish features are all part of your dream home.

And, like 94% of Canadians,* you probably believe that it’s just as

important to build one that delivers superior energy efficiency. Who

can help with this type of home? Owens Corning. They have the

PINK Insulation products you need throughout to make you home

comfortable and help use less energy to keep it warm or cool. Not

only is PINK good for the wallet, but it’s good for the environment

as well. PINK FIBERGLASS® Insulation reduces greenhouse gas

emissions, is made from 73%** recycled content and is certified

by GREENGUARD for maintaining better indoor air quality.

To learn why PINK Insulation is part of a smart plan, talk to your Castle Building Centre retailer or go to www.owenscorning.ca.

*2009 RBC Homeownership Study. THE PINK PANTHER™ & © 1964-2012 Metro-Goldwyn-Mayer Studios Inc. All Rights Reserved. The colour PINK is a registered trademark of Owens Corning. **73% recycled content is based on the average recycled glass content in all Owens Corning f iberglass batts, rolls and unbonded loosef ill insulation manufactured in Canada. GREENGUARD Children & SchoolsSM Mark is a registered cer tif ication mark used under license through the GREENGUARD Environmental Institute. Owens Corning PINK™ insulation is GREENGUARD Cer tif ied for indoor air quality, except bonded loosef ill products. This product has achieved GREENGUARD Children & Schools Cer tif ication and is verif ied to be formaldehyde free. Cer tif ied Thermal Insulation Material CCD-016. © 2012 Owens Corning. All Rights Reserved.

JOB NAME: TRADE AD-BUILDER

ART DIRECTOR COPY WRITER CREATIVE DIR. PRINT PROD. STUDIO MGR. ACCT. MGMT.

DOCKET/AD#: 12-OWC-011

DATE STARTED: JUNE 7/12

ARTIST: CS

REV#: 1

LASER %:

DISKED:

LIVE AREA: –

TYPE SAFETY: –

TRIM: 10.875" x 8.125"

BLEED: 11.125” x 8.375"

4C

PUBLICATION:

ROUGH CONSTRUCTION

http://www.owenscorning.ca

ENERGY STAR for New HomesThis edition of Rough Construction comes at a time when both contractors and homeowners need to be aware and become familiar with the latest update to ENERGY STAR for New Homes, otherwise known as ESNH.

The new and improved standard, which took effect on Dec. 1 of last year, was developed by Natural Resources Canada (NRC) with assistance from home-building professionals across the country and key industry stakeholders, some of whom can be found on the pages of this publication.

Unlike the previous standard, which was only available in Ontario and Saskatchewan, the latest version is now available to new home buyers across Canada and further contributes to energy efficiency through some new and tough requirements.

For example, according to an NRC document, its stringency has been increased to keep the energy efficiency level in an ESNH home a full 20% “better” than emerging codes.

“By identifying and promoting energy-saving products the initiative helps protect the environment and lowers energy bills at the same time. The Office of Energy Efficiency of NRC has promoted the international ENERGY STAR symbol in Canada and monitored its use since 2001.”

A recent NRC press release pointed out that in order to earn the “trusted label,” homes must be built by a trained ENERGY STAR builder and meet technical requirements developed by the federal government. In addition, the homes themselves must be verified by an independent third-party energy advisor to ensure they meet the standard.

The NRC document states that key features of a typical ENERGY STAR home include: • More energy space conditioning systems such as furnaces, air conditioners and water heaters.• Fenestration products such as windows, glass doors and skylights that are ENERGY STAR qualified.

This feature alone may reduce energy costs by more than 10%.• More insulation in the ceilings and walls than required by the building code.• In terms of air tightness, homes that qualify must meet specified maximum air leakage limits, which

help save energy for heating and cooling as well as increasing comfort.It is a valuable and worthwhile initiative.

Ken Jenkins President Castle Building Centres Group Ltd.

4 Insulation

12 Weather Proofing

18 Siding

16 Water Proofing

20 Roofing

22 Tools

In this issue

http://issuu.com/action/page?page=4






rough construction4

INSULATION

Canada’s goal is to mandate net zero performance for all buildings by 2030 to help reduce energy consumption and green house gases. Building codes will be mandating increased levels of insulation and significantly improved levels of air tightness to help build net zero ready homes.

Owens Corning™ FOAMULAR® CodeBord® Air Barrier System is an innovative solution that helps builders cost effectively meet new energy efficiency requirements in building codes and other voluntary programs such as Next Generation Energy Star, R-2000 and Novoclimat. It is an optimal heat, air and moisture management system in Canada. This system helps provide optimal occupant comfort by significantly reducing air exfiltration and infiltration and by providing a continuous insulation layer over the structure which minimizes heat loss and gains through thermal bridging.

For your customers, this Owens Corning™ Canada innovation means a comfortable home with reduced

drafts. The home is quiet because reduced air leakage means there are few paths for airborne noise penetration from the exterior. The building is durable due to reduced potential for moisture damage from condensation caused by air leakage. This improvement in energy efficiency – results in reduced heating and cooling energy costs.*

The CABS system is easy to assemble, weather resistant, cost competitive and durable. The system consists of two primary components:

• FOAMULAR® CodeBord® extruded polystyrene rigid insulating sheathing

• FoamSealR™ closed cell polyethylene sealing gaskets and/or FOAMULAR® JointSealR™ Sheathing Tape and JointSealR™Flashing Tape

Owens Corning™ FOAMULAR® CodeBord® Air Barrier System can provide clear advantages and benefits to builders and customers alike.

Keep ahead of the changing building codes with Owens Corning Canada Innovative Solutions

1. Ease of installation using current trades.2. Easier to achieve continuity and less joints

to seal compared to warm side air barrier systems, such as sealed polyethylene.

3. Where the FOAMULAR® CodeBord® is the air barrier system, the polyethylene vapour barrier need not be sealed.

4. An effective weather resistant barrier with sealed joints no longer requiring an additional sheathing membrane (e.g. building paper may be omitted).

5. Makes use of commonly available materials such as extruded polystyrene wall insulating sheathing (FOAMULAR® CodeBord® 4’ x 8’/4’x9’ or 4’x10’ sheets), sealing gaskets (FoamSealR™), and Owens Corning Joint SealR™ Foam Sheathing and Flashing Tape.

6. Is a feature that can differentiate you from the competition.

7. Is backed by one of North America’s most respected building products manufacturers.

8. Third party certified.

The FOAMULAR® CodeBord® Air Barrier System from Owens Corning is an optimal heat, air and moisture management system in Canada.

Contact your Owens Corning™ Canada technical sales representative today, or visit www.owenscorning.ca to learn more.

KEY BENEFITS FOR THE BUILDER INCLUDE:

* Savings vary. Find out why in the sellers fact sheet on R-values. Higher R-values mean greater insulating power.

http://www.owenscorning.ca

With Owens Corning™ FOAMULAR® CodeBord® Air Barrier System. Limit air leaks and increase thermal resistance with a cost effective installation – a great solution to meet the codes today and in the future.

1-800-GET-PINK® or visit owenscorning.ca

SEAL UP THE SAVINGS.*

*Savings vary depending on original amount of insulation in your home, climate, house size, air leaks, and personal energy use and living habits.

THE PINK PANTHER™ & © 1964 - 2013 Metro-Goldwyn-Mayer Studios Inc. All Rights Reserved. The colour PINK is a registered trademark of Owens Corning. © 2013 Owens Corning. All Rights Reserved.

73% recycled content is based on the average recycled glass content in all Owens Corning � berglass batts, rolls and unbonded loose� ll insulation manufactured in Canada. SCS certi� ed. GREENGUARD Children & SchoolsSM Mark is a registered certi� cation mark used under license through the GREENGUARD Environmental Institute. Owens Corning PINK™ insulation is GREENGUARD Certi� ed for indoor air quality, except bonded loose� ll products. This product has achieved GREENGUARD Children & Schools Certi� cation and is veri� ed to be formaldehyde free. The insulation is manufactured with a blowing agent with 70% less global warming potential as compared to Owens Corning previous blowing agents.

CLIENT Owens Corning BLEED SIZE 11.125”w x 8.375”h PUBLICATION COLOUR INFORMATION

DOCKET # 9934 TRIM SIZE 10.875”w x 8.125”h Rough Construction

PROJECT Seal Up The Savings LIVE AREA Summer 2013 Issue

APPLICATION InDesign 6 LANGUAGE English

PROOF STAGE 2 SCALE 100%

DATE June 21, 2013

6557A Mississauga RoadMississauga ON L5N 1A6

T 905.567.3500F 905.567.3556

Account Manager Heidi Avery X 256Art Director Scott Raven X 227

CMYK

installation – a great solution to meet the codes today and in the future.

70% Lower Global Warming Potential Than Previous Formulation

www.owenscorning.ca

rough construction6

Our dedication to quality materials helps you build your reputation as a quality contractor.

At Johns Manville, everyone in our

company is committed to a core

principle: materials matter. Legendary product quality, customer support and technical assistance make JM one of the most specified and contractor-preferred insulation brands in Canada today.

MATERIALS MATTER.

TMMATERIALS

MATTER.We’re dedicated to addressing the issues most important to you and your homeowner customers:

More efficient worksite

Support from your solutions provider

Culture of innovation

• Our entire design and manufacturing process ensures our customers receive the highest quality products.

• Your job sites can be more productive and efficient with lightweight fiber glass building insulation products that feature improved handling, easier cutting and significantly less dust.

• With products you can trust every step of the way, dedicated customer service and helpful training, count on JM to help you grow your business.

• A properly insulated home or business is one of the most cost-effective ways to help your customers save money on their monthly energy bills.

• We pioneered the development of Formaldehyde-free™ fiber glass building insulation over a decade ago and continue to set new standards for the industry with every product innovation.

• Energy efficiency helps conserve our natural resources and is why we incorporate an average of 25% recycled content during our manufacturing process across North America, adding up to 90,000 tons each year.

Learn how JM can be your insulation solutions partner at specJM.com

Bio-Based Binder Unfaced Fiber Glass Insulation

Corbond III® Closed-Cell Polyurethane Spray Foam

CI MAX™ & AP™ Foil-Faced Foam Sheathing Board

Spider®

Blown-in Insulation

© 2013 Johns Manville, Inc. All Rights Reserved.

www.specjm.com

rough construction8

www.duchesne.ca

INSULATION

rough construction10

PlastiSpan® HD Hydronic Insulation

Benefits of PlastiSpan® HD Hydronic Insulation:

• Provides continuous insulation layer that ensures uniform heat distribution.

• Floor area will be noticeably warmer to anyone standing on it.

• Insulation installs quickly and easiy with no special skills, tools or equipment required.

• No mechanical attachment of hydronic tubing is required.

• Energy efficient method of constructing a heated basement floor slab.

www.plastifab.com 1-888-446-5377 1-88-THINK-EPS® www.advantageicf.com

Watch the Hydronic Floor Insulation Video

http://www.advantageicf.com

www.plastifab.com

The Advantages of the Advantage ICF System®

Field proven tongue and groove interlock on straight and corner blocks provides: a. Interlock aligns the webs for easier fastening of interior and exterior finishes

b. Enables ICF Blocks to fit together smoothly and tightly, minimizing settling c. Eliminates need for horizontal and vertical “clips”

Brick ledge design provides continuous concrete for protection of rebar

and support of brick cladding.

Strongest 8” 90 Degree Corner block in the industry with 4 specialty designed

webs at the stress points.

Plasti-Fab®, PlastiSpan®, and Advantage ICF System® are registered trademarks of Plasti-Fab Ltd.

Watch a time lapse installation video of Advantage ICFs

EcoLogo CertifiedThermal Insulation – CCD-016

Certifié ÉcologoIsolation thermique DCC-016:

1

1

2

2

3

3


WEATHER PROTECTION

MOISTURESHIELD: MAKE THE OUTDOORS EVEN GREATER.

MoistureShield® Composite Decking is a perfect marriage of nature, design, and quality. Highlighted by an array of color options, innovative engineering processes, and an unmatched warranty, it’s a decking product that has all the bases covered. And, MoistureShield is produced in a manner that helps conserve the planet’s resources -an approach that we take very seriously.

You can offer your customers a product with tremendous strength and versatility, but not at the expense of beauty. Embrace the ability to create a charming MoistureShield deck that will complement the look and feel of any home.

WE ALWAYS OUTPERFORM.For 25 years and counting, MoistureShield has never experienced field failure due to rot, decay or delamination.

Through its proprietary manufacturing, MoistureShield is totally encapsulating resulting in a durable board with vibrant, lasting color.

MoistureShield is non-toxic and does not require staining, painting or sealing.

MoistureShield is as easy to install as wood products.

WE HAVE OPTIONS.MoistureShield has 3 products to choose from: decking, railing accessories and fencing.

MoistureShield Decking and Railing are available in eight colors: Cape Cod Gray, Earthtone, Rustic Cedar, Seasoned Mahogany, Bridle, TigerWood, Walnut and Desert Sand.

WE ARE A PRODUCT OF EXCELLENCE.

MoistureShield Composite Decking is backed by a transferable limited lifetime warranty against rot, decay and insect damage.

Because MoistureShield is totally encapsulated, it can be installed on the ground, in the ground and underwater and it will not void the warranty.

The MoistureShield warranty can be transferred one time and is more than twice the length of most composite decking manufacturers.

WE ALWAYS HAVE THE ENVIRONMENT IN MIND.MoistureShield is made with 95% total recycled content, including recycled plastic grocery bags and packaging film.

Due to its high percentage of recycled content, MoistureShield decking products can help earn credit in LEED® green building rating programs.

FOR MORE INFORMATION ABOUT MOISTURESHIELD PLEASE VISITMOISTURESHIELD.COM

Register in the MVP Program and you could win a fishing trip to the

Ozark Mountains.Visit canwel.com for more details.

Visit moistureshield.com for more details.

BUILD A DECK FOR LIFE.

ATTN: CONTRACTORS!

MoistureShield® Valued Partner (MVP) A MoistureShield® Valued Partner (MVP) is a building professional who is committed to building quality decks, docks and outdoor living spaces using MoistureShield products. As a MVP, you are in an elite group of contractors/builders who have been certifi ed to build MoistureShield decks and docks.

Benefi ts include:• Listed in contractor locator database• Customer leads and referrals• Technical support and training• Participation in the Rebate Program

Contractor Rebate ProgramThe rebate program will help support your business by giving money back to you for each decking board of MoistureShield installed.

Imagine a deck that can withstand waves of family fun and backyard barbecues.MoistureShield is the only decking product that can be installed on or in the ground, or even underwater. Provide your customers a more durable deck that is guaranteed to turn the tide on the toughest conditions.

www.moistureshield.com


www.insulateyourhome.com

Take Comfort from Dow’s Expertise A comfortable, energy-efficient home relies on insulation and air sealants to create an airtight building envelope. Dow Building Solutions’ 60+ year legacy of providing energy saving solutions to the construction industry began with the launch of its flagship STYROFOAM™ Brand Extruded Polystyrene (XPS) Foam Insulation.

STYROFOAM™ Brand CLADMATE™ Insulation Extruded polystyrene foam insulation with thin profile, allowing minimal additional framing for windows and doors. Meets CAN/ULC S701 Type 2, CCMC 12084-L and 2005 National Building Code – Canada air barrier permeance properties. Board size*: 2' x 8' (600 mm x 2,400 mm) 4' x 8' (1,200 mm x 2,400 mm) 4' x 9' (1,200 mm x 2,700 mm) Thickness*: 0.5" to 3" (13 mm to 75 mm) R-value (RSI): R-2.5 to R-15 (0.44 to 2.64)

STYROFOAM™ Brand SM Insulation With a minimum compressive strength of 30 psi (210 kPa), this multipurpose XPS insulation is designed for roof decks, cathedral ceilings, exterior foundations, crawl spaces and basement floors. Meets CAN/ULC S701 Type 4, CCMC 06525-L. Board size*: 2' x 8' (600 mm x 2,400 mm) Thickness*: 1" to 4" (25 mm to 100 mm) R-value (RSI): R-5 to R-20 (0.88 to 3.52)

STYROFOAM™ Brand WALLMATE™ Insulation Designed for interior basement walls and crawl spaces, this insulation has slotted edges that when butted together form a slot between the foam boards to accommodate a 1" x 3" (25 mm x 75 mm) wood nailing strip. The strip is used to attach the boards to the basement wall and also provides a nail base for drywall. Meets CAN/ULC S701 Type 2, CCMC 12083-L. Board size*: 2' x 8' (600 mm x 2,400 mm) Thickness*: 1.5" to 2.4" (38 mm to 60 mm) R-value (RSI): R-7.5 to R-12 (1.32 to 2.11)

GREAT STUFF PRO™ Wall & Floor AdhesiveA heavy-duty, premium-grade polyurethane foam used to adhere subfloors, drywall, paneling, foam panels and most construction materials. For convenience, dispense adhesive using the PRO 14XL long-barrel gun from Dow. One 26.5 ounce (751 gram) can of GREAT STUFF PRO™ Wall & Floor Adhesive replaces 4-6 nominal quart tubes of caulk adhesive. Note: Caulk adhesive tube (28 ounces/794 grams) applied at 1/4" (6.5 mm) bead diameter. One can of GREAT STUFF PRO™ Wall & Floor Adhesive applied per instructions at 1/2" (13 mm) bead diameter.

GREAT STUFF™ Insulating Foam Sealants**For smaller or application-specific projects, use GREAT STUFF™ family of sealants with the same great performance as the PRO family. Easy to apply using the supplied straw. Select from: GREAT STUFF™ Gaps & Cracks GREAT STUFF™ Big Gap Filler GREAT STUFF™ Window & Door GREAT STUFF™ Pond & Stone

Dow’s broad portfolio of STYROFOAM™ Brand XPS Foam Insulation products, air sealants, tape and other accessories enhance:

• Long-term thermal performance • Energy savings

• Moisture resistance • Indoor air quality

• Structural integrity • Sustainability • Resale value

FROTH-PAK™ Foam Sealant Kits** Available in convenient, portable kits, this two-component, quick-cure polyurethane foam expands to fill cavities, openings and penetrations larger than 2" (51 mm) such as roof and wall junctions; wall and attic penetrations; electrical, mechanical and plumbing penetrations; and rim joists. Also available in refillable, returnable cylinders. Meets CCMC 13074-R and UL Classified, Certificate R13655.

GREAT STUFF PRO™ Gaps & Cracks Insulating Foam Sealant** A one-component, minimal-expanding polyurethane foam that is suited for general purpose building envelope sealing. It fills, seals and insulates gaps up to 3" (75 mm), blocking drafts and moisture. Meets CCMC 13074-R and UL Classified as an air sealant.

GREAT STUFF PRO™ Window & Door Insulating Foam Sealant** A one-component, minimal-expanding, low pressure-build, flexible polyurethane foam that air seals the gap between a window or door frame and its rough opening. It is proven not to distort or bow window and door frames when applied properly. Meets CCMC 13074-R and UL Classified as an air sealant.

®™ Trademark of The Dow Chemical Company (“Dow”) or an affiliated company of Dow * Not all thicknesses and sizes available in all areas of the country. Consult a Dow representative with questions. ** Consult labels/instructions and Material Safety Data Sheets carefully before use.

Use new GREAT STUFF™ Work Wipes to clean uncured GREAT STUFF™ and GREAT STUFF PRO™ foam from dispensing gun and many other surfaces.

Dow’s Most Popular Insulation and Air Sealant Solutions

DowAd_Castle3.indd 2 12-06-07 8:45 AM

http://www.insulateyourhome.com

Solutions for a Comfortable Interior

EXTERIOR ROOF DECK

EXTERIOR SHEATHING

BASEMENT FLOOR

INTERIOR BASEMENT WALL

INTERIOR CATHEDRAL CEILING

CRAWL SPACE

EXTERIOR FOUNDATION


STYROFOAM™ Brand SM Insulation

STYROFOAM™ Brand CLADMATE™ Insulation

STYROFOAM™ Brand WALLMATE™ Insulation

Air infiltration accounts for 25-40% of the energy used for heating and cooling a typical home.* In addition to insulating with rigid foam insulation, seal gaps and cracks around openings and penetrations with insulating foam sealants and accessories from Dow.

®™ Trademark of The Dow Chemical Company (“Dow”) or an affiliated company of Dow * www.energystar.gov

DowAd_Castle3.indd 3 12-06-07 8:45 AM



RED ZONE

REDUCE AIR LEAKS. SAVE ON ENERGY COSTS!ELIMINATE WATER INFILTRATIONS.AVOID COSTLY PROBLEMS!

RECOMMENDED USES• Exterior surfaces (except below grade)• Door and window frames• Various openings such as solarium structures, skylights• Brick flashing, roof flashing, and other details• Lap joints (between strips of RESISTO waterproofing

membranes installed without overlaps• Around ducts, plumbing penetrations, electric outlets

WIDTHS AVAILABLE4 in, 6 in, 9 in, 12 in, 18 in and 36 in

AIR BARRIER& WATERPROOFING

Page de gauche

C

M

Y

CM

MY

CY

CMY

K

*PAP Resisto 10,875x8,125_DROITE_HR.pdf 1 12-05-02 14:38

www.resisto.ca


SIDING

GENTEK INTRODUCES NEW COLOURS AND EXPANDS PRODUCT OFFERING AT SUPPLY CENTRESWhether your project is simple or ambitious, traditional or modern – you’ll find everything you need at Gentek supply centres. The company recently added three new colours to its vinyl siding product line and expanded its inventory to include other popular brands.

Gentek has introduced three new vinyl siding colours in Mountain Arbor, Monterey Sand and Coastal Blue.

Manufactured by

New Gentek Vinyl Siding Colours

Gentek’s classic colour palette for all vinyl sidings now features Monterey Sand, a neutral shade that will work beautifully with a full range of architectural styles. Two deeper colours – Mountain Arbor and Coastal Blue – have joined Gentek’s designer colour palette and are available in the ultra-premium Sequoia® Select and Board & Batten sidings.

DuraStone 3D Textured Architectural Ledge Stone

Touted as “nature’s alternative” to genuine stone, DuraStone recreates natural stone beauty and texture at a lower cost. The panels feature a high-density resin construction that is lightweight yet highly durable.

• Full selection of natural stone and brick profiles

• UV-resistant formula maintains its attractive appearance

• Resistant to moisture and pests

• Eco-friendly and can contribute to Leed certification

• Lightweight design saves costs in transportation, installation and labour

Longboard™ Premium Siding and Soffit

Ideal for commercial and high-end residential applications, Longboard aluminum siding and soffit offer a wide range of realistic woodgrain finishes and colour options. The product is available in 24' panel lengths in 10 woodgrain finishes and a full selection of powder-coated colours, including select Gentek colours.

• Installs in any weather

• Alluminate Finish ensures excellent durability and resistance to weathering

• Up to 25% recycled content and 100% recyclable

• Zero long-term maintenance; won’t rot, warp, peel or fade

• Can be matched to other products using Alluminate Finishes

NoviStone™DS Dry Stack Stone

Designed for indoor or outdoor applications, NoviStone™DS dry stack stone offers “natural stone” elegance in easy-to-install panels.The specially treated polymer construction is highly durable, lightweight and virtually maintenance-free.

• Choose from 10 popular colours

• Corners and Novitrim™ in matching colours

• Fade-resistant colour technology keeps colours rich and true

• Beautifully withstands exposure to tough weather

Make a Colour Statement!

INTRODUCING 3 NEW SIDING COLOURS

Gentek vinyl siding now features three beautiful new colours: Mountain Arbor, Monterey Sand and Coastal Blue. This expanded colour palette makes it easy for homeowners to create their own “signature” look with inspired designs and colour combinations.

Stay-True Colour Choose darker colours with confidence! Gentek darker vinyl siding colours are fortified with fade-resistant ChromaTrue® technology to ensure the luxurious colour stays true.

• Excellent resistance to weathering and yellowing• High thermal stability• Does not chalk• Carries a lifetime limited warranty against fading†

†See printed warranty for complete details.*Board & Batten in designer colours is not available in certain regions of British Columbia and Alberta. Trademarks mentioned in this ad are the property of Gentek Building Products, its affiliates, or their respective owners.

Visit us atwww.gentek.ca!

Classic Colours

Snow White

Linen

Sandstone

Almond

Monterey Sand

Canyon Clay

Sandalwood

Pearl

Dover Gray

Sage

Designer Colours*

Venetian Red

Harvest Wheat

Dark Drift

Saddle Brown

Mountain Arbor

Moonlit Moss

Midnight Surf

Maize

Antique Ivory

Juniper Grove

NEW!

Wicker

Coastal Blue

Windswept Smoke

NEW!

NEW!

Pebble

http://www.gentek.ca

http://www.gentek.ca





• Made in Canada























VW Summerside Rough Const Advetorial_Layout 1 2013-06-05 4:44 PM Page 1

ROOFING


www.vicwest.com





• Made in Canada























VW Summerside Rough Const Advetorial_Layout 1 2013-06-05 4:44 PM Page 1

www.vicwest.com


TOOLS

LXDT06 1/4” 18V IMPACT DRIVER WITH BRUSHLESS MOTORLXDT06 is a State of the Art Brushless Impact Driver, with industry benchmark setting features such as XPT and TEK driving mode.

These features make driving fasteners a breeze regardless of if into wood, metal or masonry and keep the tool functioning in demanding working conditions, where other tools may fail.

In addition to 3 driving speeds and torques, this tool features a TEK driving mode which is unique in the industry, making fastening into metal fast and effortless. It prevents over torquing and stripping of the threads or the fastener heads.

The tool also features our exclusive eXtreme Protection Technology ( XPT) protecting the tool in dusty and wet conditions. Keeps on working despite getting wet and getting dusty, allowing for finishing the job in those conditions.

The tool works on our LXT Lithium ion battery and charger platform that is shared by over 50 other LXT family of tools.

FEATURES & BENEFITS:• Variable 3-Speed, Reversible• Improved Heavy Duty Design and Brushless DC Motor• eXtreme Protection Technology (XPT) offers

maximum protection against dust, debris and liquids for optimal performance in extreme conditions

• 3 Stage Impact Power Selection + TEK Mode prevents over tightening of fasteners

• TEK mode reduces impact power during final stages of fastener seating

• Battery Fuel Gauge indicates approximate remaining battery power

• Brushless DC Motor with high power to weight and size ratio • Brushless DC Motor generates less heat buildup and is ideal

for prolonged use in manufacturing / production applications • NEW Battery Protection System provides Over-Discharge,

Temperature and Current Protection for enhanced performance, battery cycle life and overall battery life

• LED Job Light with Pre-Glow and Afterglow features • Ergonomic Soft Rubber Grip for vibration absorption

and comfortable operation

LXFD03 ½” 18V HIGH TORQUE, HEAVY DUTY DRIVER DRILLLXFD03 is a Heavy Duty drill driver with the highest torque rating in the market currently

It features all metal gears and gear box for durabilityIt is built with a compact design enabling use in tight areasIt also features the XPT design that allows the tool to be operated in wet and

dusty work conditionsThe tool also features our exclusive eXtreme Protection Technology ( XPT)

protecting the tool in dusty and wet conditions. Keeps on working despite getting wet and getting dusty, allowing for finishing the job in those conditions.

The tool works on our LXT Lithium ion battery and charger platform that is shared by over 50 other LXT family of tools.

FEATURES & BENEFITS:• Variable 2-Speed, Reversible• High Efficiency,Compact Design• eXtreme Protection Technology

(XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions

• NEW Battery Protection System provides Over-Discharge, Temperature and Circuit Protection for enhanced performance, battery cycle life and overall battery life

• 21 Clutch Settings deliver up to 750 in. lbs. of torque

• All Metal Gears for more efficient power transmission

• Ultra-Compact Design (Only 8-7/8” Long) • Dual LED Job Lights with Pre-Glow and Afterglow feature• Improved Ergonomic Soft Rubber Grip design for

vibration absorption and comfortable operation features re-contoured rear grip portion and ribbed grip for improved hold

www.makita.ca

Rough Construction June 2013

Documents

Transcript of Rough Construction June 2013