Rollcontainer for food distribution: details

www.gebhardt.eu July 2008 © GEBHARDT Food & Retail Solutions GmbH

Food & Retail Solutions

Specification Rollcages

Customer Solutions for Storage and Transport


demountable construction, composed of:plastic base Swivel / fixed wheels

sidewalls – to be plugged in and fixed by a clip

modular design allows variations, such as:

Additional (back-) walls

shelves

etc.

Plastic Rollcages: G 2000


1. Plastic Rollcages: Technical Data

Dimensions: 720 x 815 mm (28,35 x 32,09 inch)

Effective height: 1.350 – 1.700 mm (53,15 x 66,93 inch)

Effective load: 500 kg

Material (base): special HDPE (primary material)with flat metal reinforcements

Wheels: different types possible, diameters from 80-up to 125 mm ( 3 – 5 inch)

Material sidewalls: steel, powder–coated or galvanized

Colour: any RAL – tone on request

Marking (base): imprinting on request


2. Assembly

plastic base

assembly 1 assembly 2

easy mounting by foot-pushed clip


3. Handling of empties

Alternative 1

1:5 volume reduction of empties

4 disassembled rollboxes can be nested in one rollbox

additional use of straps prevents damaging of load

Alternative 2

1:4 volume reduction of empties

separate transport & storage of bases and sidewalls

bases: parallel stacking


4. Soft benefits of demountable rollcages

1. fully recyclable plastic base made from HD – PE (High Density PolyEthylen)

2. food safe

3. high load capacity (up to 500 kg)

4. high durability

5. colour and imprinting of base and side walls on customer´s request

6. easy to clean

7. no sharp edges – low risk of injury

8. rustproof base

9. low weight

10. low noise development

11. simple assembly and disassembly

12. simple stacking of base

13. Multifunctional, modular design:(1 base construction, 2-, 3-, and 4-sided usable by simply hanging in / out the 3rd / 4th wall

14. flexible base construction with few deformations and low vibration transmittances


5. Hard benefits of demountable rollcages

1. better volume reduction of empties (1/5 instead of 1/3)1a. cost reduction with empties during STORAGE (store + warehouse)1b. cost reduction with empties during TRANSPORT

2. lower acquisition costs per piece

3. lower capital lockup in the rollcage pool

4. cheaper repairs due to simple, modular construction

5. saving potential with castors:due to noise absorbing plastic base usable without expensive sandwich castors


6. Company`s specifications

Sidewalls- galvanized or- powder coated

base – colour elegible

imprinting:„Company“ – colour elegible


7. Company`s specifications - bases

optionalbarcode area

metal bottom supports

reinforcedplates

Quantity: 1 base per cage

Dimensions: 720 x 815 mm

Wheels: 2 swivel, 2 fixed

Wheel diameter: 108 or 125 mm

Effective load: 500 kg

Material: HDPE (primary mat.)

Colour base: elegible

Marking: „Company“(on 2 narrow sides) max. load: 500 kg

Colour of marking: elegible

Metal bottom supports: 2x lengthwise; 2x crosswise

Reinforcement plates: 4x underneath wheelswelded to supports


8. Company`s specifications - sidewalls

Optional plate

Single or doublewelding

Quantity: 2 sidewalls per cage

Effective height: 1.350,1.450 or 1.700 mm

Frame tube diameter: 21,3 mm

Vertical bars: x flat metal bars; x round tubes

Horizontal bars: x flat metal bars

Welding of bars: single or double welding

Fixing on base: fixed with X-clip

Plate: optional

Material: steel, powder-coated or galvanised

Colour: elegible

X-clip


Contact

GEBHARDT Food & Retail Solutions GmbH

Frühlingstr. 2 – 3

93413 Cham

Tel: 09971 – 841 – 167

Fax: 09971 – 841 – 8350

E-mail: [email protected]

Internet: www.gebhardt.eu

Rollcontainer for food distribution: details

Food

Transcript of Rollcontainer for food distribution: details