Roll-off container covers are a lightweight, durable, affordable solution for covering the contents of roll-off containers.

• Opens to 90 degrees for easy access to entire container

• Locks to protect container from theft and unauthorized dumping

ROLL-OFF CONTAINER COVERS

FEATURES & BENEFITS• Built with UV-protected, impact-resistant

high-density polyethylene (HDPE)

• Standard design is permanently mounted and travels with the container at all times

Meets EPA regulations for

storm water exposure.

Available in 3 Custom Configurations:

StandardCover is permanently mounted and travels with the container.

1

2 RemovableCover can be easily transferred to other containers with a forklift.

3 Stand-aloneCover is mounted on a frame that’s attached to concrete slab or footing. This stand-alone configuration allows containers to be swapped out from underneath cover.

ROLL-OFF CONTAINER COVERS

(Optional 5’ guide rails with stops available)

Integrated forklift pockets molded into cover make transferring fast and easy.

Opens to 90 degrees for access to entire container.

ROLL-OFF CONTAINER COVERS

Ability to maintain total container functionality even when cover is securely fastened.

Locks to keep contents

safe and prevent unauthorized

dumping.

1

1

2

2

3

3

4

4

A A

B B

SHEET 1 OF 1

DRAWN

APPROVED

TJB 2/11/2015

DWG NO

CoverFrameAssly1

TITLE

COVER/FRAME ASSEMBLY

SIZE

B

SCALE

REV

A

TOLERANCES UNLESS SPECIFIED

UNITS = INCHES

X.X ` 0.1

X.XX ` 0.06

X.XXX ` 0.030

X.XXXX ` 0.0010

FRACTIONS ` 1/16

ANGLES ` 0.5°

THIS PRINT IS THE PROPERTY OF TB INDUSTRIES, INC. THIS DRAWING REPRESENTS

A PROPRIETARY ARTICLE(S) IN WHICH TB INDUSTRIES, INC. RETAINS ALL AND ANY

RIGHTS, PATENT(S) OR OTHERWISE, TO INCLUDE EXCLUSIVE RIGHTS TO USE,

MANUFACTURE, AND/OR SELL. POSESSION OF THIS PRINT DOES NOT CONVEY ANY

PERMISSION TO REPRODUCE PRINT OR MANUFACTURE THE ARTICLE(S) SHOWN

HERE-IN. SUCH PERMISSION MAY ONLY BE GRANTED BY SPECIFIC AUTHORIZATION

IN WRITING, SIGNED BY AN AUTHORIZED AGENT OF TB INDUSTRIES, INC.

SPECIFICATIONS MAY NOT BE ALTERED OR SUBSTITUED WITHOUT WRITTEN

APPROVAL FROM TB INDUSTRIES, INC.

TB INDUSTRIES, INC.

ROLL-OFF CONTAINER COVERS

Tel: 877.468.9278 | sales@wastequip.com | www.wastequip.com

Wastequip is the leading North American manufacturer of waste and recycling equipment for collecting, processing, and transporting recyclables and solid or liquid waste. © Wastequip, all rights reserved. Specifications subject to improvement without notice. Equipment displayed should be operated by properly trained personnel. Operators should become familiar with OSHA, ANSI and any other applicable standards or laws for using this equipment. Improper use, misuse, or lack of maintenance could cause injury to people and/or property. Photos used in the literature are illustrative only. Wastequip assumes no liability or responsibility for proper training/operation of equipment not manufactured by Wastequip. We reserve the right to make changes at any time without notice. Information contained within this literature is intended to be the most accurate available at time of printing.

WQP102-122015

To ensure proper opening and closing functionality there will be a gap of up to 2” between the cover and top of container.

MODEL # DESCRIPTION

220085 Roll-off cover with permanent mount length more than 12’ and up to 23’

2200XRO Removable option for roll-off cover (includes clamp-on hinges and fork pocket frame to make cover removal simple)

2200XSO Stand-alone option for roll-off cover (includes mounting frame for existing concrete slab or footings)

Available for Order:

• Pre-installed on new Wastequip roll-off containers

• Sold separately for mounting on existing containers

Options Available:

• Special hinge for tapered containers

• Extension overhang kit

20"

100" ADJUSTABLE FROM 12' - 23'

(UP TO 26' WITH OPTIONAL EXTENSION KIT)

22"