RNS221
-
Upload
e-direct-division-of-endresshauser -
Category
Devices & Hardware
-
view
57 -
download
0
Transcript of RNS221
Products Solutions Services
Application / FunctionOverview Technical data Dimensions
Electrical connection Price table ContactGo to shop
Technical DatasheetTD 00015E/24/EN/01.13
• Two-channel supply for two 2-wire sensors or transmitters
•Galvanic isolation between all circuits
• LED status indicators•Wide range power supply, 20 to
250 V AC/DC, 50/60 Hz• Top hat (35 mm / 1.38”) DIN rail
mounted housing to EN 50 022-35
Complete product information:www.e-direct.us/rns221
Specs at a glance:
•HART® signal: Bidirectional•Diagnostics:
Via HART® status bit or NE43• Relay output:
Optional for HART® diagnostics
Power supply
RNS221
$ 201.00
RNS221 2
Overview Technical data Dimensions
Electrical connection Price table ContactGo to shop
Application / Function
Application The RNS221 power supply supplies two 2-wire sensors or galvanically isolated transmitters. This is only valid for non-hazardous areas. Using the HART® communication sockets allows bi-directional communication to SMART transmitters (for setup, etc.).
Function The power supply has two galvanically isolated outputs for supplying voltage to sensors and transmitters. A built-in communication resistance (R = 250 Ω) enables bi-directional HART® communication with SMART sensors and transmitters.The system includes two channel power supply, 24 V DC, 30 mA, with LED status display for electrical supply of sensors and transmitters. All circuits are galvanically isolated from each other. The unit is constructed of 35 mm top hat DIN rail mounting.
RNS221 3
Application / FunctionOverview
Electrical connection Price table ContactGo to shop
DimensionsTechnical data
Technicaldata Dimensions(ininches)
OutputOutput signal Two channels for transmitter power supply,
open circuit voltage 24 V ±10 %, with integrated HART® communication resistance R=250Ωforeachoutput
Output current circuit Maximum 30 mA. Short circuit current, both channels are continuously short circuit protected
Galvanic isolation Between all circuits
Power supplyPower supply Wide range power supply, 20 to 250 V AC/
DC, 50/60 HzPower consumption P≤5WCurrent requirement (Input current limitation) Imax /In < 15Power failure To EN 61 000-4-11
Operating conditionsAmbient temperature -20 to +60 °C (-4 to +140 °F)Storage temperature -30 to +70 °C (-22 to +158 °F)Climatic class To EN 60 654-1 Class B2Ingress protection NEMA 1EMC To IEC 61326, transmission Class A,
immunity to IEC 61326 industrial environment
Over voltage protection
To EN 61 010-1, Category II, installation protectionfuse≤10A
0.89 4.41
1 2
CH 2
ENDRESS+HAUSERRNS 221
CH 1
3.78
4.33
Housing for top hat rail mounting according to IEC 60715
Installation according to instruction manual
Mechanical constructionWeight < 1 lb (approximately 0.140 kg)Housing PC/ABS, UL 94V0Terminals Power and signal connections, keyed plug-on
screw terminal, 16 AWG solid wire; 18 AWG for stranded wire with ferrule. Communication connection sockets, 2 mm (0.79”) on front panel of unit
Display and operating levelDisplay elements 2 yellow illuminated LEDs with connected
outputs; 1 green illuminated LED with main power connection
Installation hints The installation area must be vibration-free; keep within the permitted ambient temperature range; protect the unit from extreme heat sources
ApprovalsCSA approval CSA General Purpose
RNS221 4
Application / FunctionOverview Technical data Dimensions
ContactGo to shopElectrical connection Price table
20 to 250 VAC/DC50/60 Hz
Connection HART® 2
Connection HART® 1
HART®X03 X01 X02
L/L+ N/L-
Terminal layout In and outputsL/L+ L for AC, L+ for DC Input for power
supplyN/L- N for AC, L- for DCX01 Power supply to transmitter 1 and 2 (+) Output for
transmitterpower supply
X02 Power supply to transmitter 1 and 2 (+)X03 Power supply to transmitter 1 and 2
with intergrated HART® communication resistance(R=250Ω)(+)
HART® HART® communication to SMART transmitter
Communicationsockets(CH 1, CH 2)
Pricetable
RNS221 Order no. Price/pcs. in USDApproval Power Supply 1 to 5 6 to 10 11 to 35Non-hazardous area 20-250 V DC/AC RNS221-A1 228.00 212.00 201.00Prices valid until 09.30.2013 in U.S. dollars per unit (not including shipping and applicable sales tax).See Endress+Hauser, Inc. Terms and Conditions of Sale for shipping, tax, and payment terms.
Complete product information:www.e-direct.us/rns221
Electricalconnection
Moreproductstocompleteyourmeasuringpoint… CapacitiveprobeLiquicap T FMI21
PressuretransmitterCerabar T PMC131
CompactthermometerEasytemp TMR31
Application / FunctionOverview Technical data Dimensions
Electrical connection Price table ContactGo to shop
Contact
E-directEndress+Hauser, Inc.2350 Endress PlaceGreenwood, IN 46143
Direct order
Internet www.e-direct.usby phone 888- EH-DIRECT
(343-4732)per Fax 317-535-8498E-Mail [email protected]