RESTORATIVE & PROSTHETICS...WAVEONE®, from Dentsply Sirona, sets new standards in Endodontics, by...
Transcript of RESTORATIVE & PROSTHETICS...WAVEONE®, from Dentsply Sirona, sets new standards in Endodontics, by...
RESTORATIVE & PROSTHETICSHANDPIECE CATALOG
www.nsk-inc.com PR-D718A v9 19.10.NAM
Air Driven / Electric / Slow Speeds
Handpiece_catalog_H1-H4
The skilled hand knows.
Ti-Max Z
Ti-Max X
S-Max M
S-Max pico
Ti-Max X450
Pana-Max PLUS
PANA-MAX
NSK COUPLERS
NLZ
Ti-Max Z
Ti-Max Z45L
nano SERIES
Ti-Max X
S-Max M
FX SERIES
EX SERIES
NSK AIR MOTORS
iProphy Air
iCare
PANA SPRAY Plus
SPARE PARTS
P 02 - 05
P 06 - 07
P 08 - 09
P 10 - 11
P 12 - 13
P 14
P 15
P 16 - 17
P 18 - 19
P 20 - 21
P 22 - 23
P 24 - 25
P 26 - 27
P 28
P 29
P 30 - 31
P 32
P 33
P 34 - 35
P 35
P 36 - 37
01Restorative & Prosthetics
Air D
riven
Co
up
lers
Elec
tric M
oto
rsEle
ctric & slo
w sp
ee
ds
Air M
oto
rsM
ain
ten
an
ce
Spa
re Pa
rts
Ti-Max Z Air Driven series feature the essential elementsexpected of high-performance handpieces at even a higher standard.Based on the philosophy of consistently delivering products that exceed all expectations, the new handpieces, supported by non-compromising NSK product design and high precision processing technology, provide a new level of comfort to both clinicians and patients.
Only Z900L*
POWERFUL 26W, STEADY & DURABLE*
The patented NSK Clean Head System is designed to automatically prevent the entry of oral fluids and other contaminants into the handpiece head, prolonging the life of the bearings.
Clean Head System
A new specially-shaped rotor delivers 26W of high power and reduces treatment time.
High Power 26W
Data on the durability of bearings*
Air Driven Series
Newly developed bearings increase stability and durability and reduce running costs.
Higher Durability
*Compared to our existing model
*
02 03Restorative & Prosthetics
Air D
riven
26W of Pure Power Just Raised the Bar Again
Connect to NSK Couplers
Order Code
Miniature Head
Standard Head
Coupler
COUPLER OPTIONS
Order Code
Model
Compatible Air driven with Integral LED*
Miniature Head
• Power : 23 W • Speed : 360,000~440,000 min-1 • Head Size : ø10.8 x H12.1 mm
• Titanium Body with Scratch Resistant DURAGRIP • Ceramic Bearings • Push Button Chuck
• Quattro Spray • Microfilter • Clean Head System • Cellular Glass Optics
OPTIC MODEL : ORDER CODE : Z800L P1110
Standard Head
• Power : 26 W • Speed : 320,000~400,000 min-1 • Head Size : ø12.5 x H13.1 mm
• Titanium Body with Scratch Resistant DURAGRIP • Ceramic Bearings • Push Button Chuck
• Quattro Spray • Microfilter • Clean Head System • Cellular Glass Optics
OPTIC MODEL : ORDER CODE : Z900L P1111
NSK
P1110
Z900L
P1111
Z800L
KaVo®
P1112
Z900KL
P1113
Z800KL
W&H®
P1120
Z900WL
P1121
Z800WL
W&H®
P1118
Z900WHL
P1119
Z800WHLModel
Quattro Spray
Quattro Spray
*
*
KaVo® LED Coupler
W&H® Roto Quick
(RQ Type)
W&H® Roto Quick
(RA Type)
NSK Couplers(PTL type)
Autoclavable up to 135ºCWashable in the thermodisinfector
04 05Restorative & Prosthetics
Air D
riven
The Satisfaction of Owning a Light Weight and Better-Balanced Handpiece
Connect to NSK Couplers
• For short shank burs only
Miniature Head
• Power : 17 W • Speed : 390,000~450,000 min-1 • Head Size : ø10.3 x H11.7 mm
• Titanium Body with Scratch Resistant DURACOAT • Ceramic Bearings • Push Button Chuck
• Quattro Spray • Clean Head System • Cellular Glass Optics
OPTIC MODEL : ORDER CODE : X500L P495
Standard Head
• Power : 21 W • Speed : 380,000~440,000 min-1 • Head Size : ø11.2x H13.6 mm
• Titanium Body with Scratch Resistant DURACOAT • Ceramic Bearings • Push Button Chuck
• Quattro Spray • Clean Head System • Cellular Glass Optics
OPTIC MODEL : ORDER CODE : X600L P496
Quattro Spray
Quattro Spray
Quattro Spray
Miniature Head
Standard Head
Coupler
COUPLER OPTIONS
NSK
P495
X600L
P496
X500L
KaVo®
P857
X600KL
P858
X500KL
Order Code
Order Code
Model
Model
KaVo® LED Coupler
NSK Couplers(PTL type)
Autoclavable up to 135ºCWashable in the thermodisinfector
06 07Restorative & Prosthetics
Air D
riven
Slim, Ergonomic Design with High Cutting Performance
Connect to NSK Couplers
Quattro Spray
Quattro Spray
Miniature Head
• Power : 16 W • Speed : 380,000~450,000 min-1 • Head Size : ø10.6 x H12.4 mm • Stainless Steel Body
• Ceramic Bearings • Push Button Chuck • Quattro Spray • Clean Head System • Cellular Glass Optics
NON-OPTIC
OPTIC MODEL : ORDER CODE : M500L P1001
MODEL : ORDER CODE : M500 P1003
Standard Head
• Power : 20 W • Speed : 360,000~430,000 min-1 • Head Size : ø12.1 x H13.3 mm • Stainless Steel Body
• Ceramic Bearings • Push Button Chuck • Quattro Spray • Clean Head System • Cellular Glass Optics
NON-OPTIC
OPTIC MODEL : ORDER CODE : M600L P1002
MODEL : ORDER CODE : M600 P1004
Miniature Head
Standard Head
Coupler
COUPLER OPTIONS
(Optic)
NSK
P1001
M600L
P1002
M500L
(Non-Optic)
NSK
P1003
M600
P1004
M500
(Optic)
KaVo®
P1005
M600KL
P1006
M500KL
(Non-Optic)
KaVo®
P1007
M600K
P1008
M500K
Order Code
Order Code
Model
Model
KaVo® LED Coupler
NSK Couplers(PTL type)
Autoclavable up to 135ºCWashable in the thermodisinfector
08 09Restorative & Prosthetics
9.0
ø8.6
13.6
ø11.2
Air D
riven
Comparison of head sizes
Ti-Max X600L(Standard Head)
S-Max pico(Ultra Miniature Head)
Model
Order Code
Coupler
NSK
S-Max pico
P1140
KaVo®
S-Max pico KL
P1142
• For short shank burs / ultra short shank burs
• Power : 9 W • Speed : 380,000~450,000 min-1 • Head Size : ø8.6 x H9.0 mm • Stainless Steel Body
• Ceramic Bearings • Push Button Chuck • Single Spray • Clean Head System • Cellular Glass Optics
OPTIC MODEL : ORDER CODE : S-Max pico P1140
An ultra-mini head and super slim body
Connect to NSK Couplers
Single Spray
COUPLER OPTIONS
KaVo® LED Coupler
NSK Couplers(PTL type)
Size specifications of the S-Max pico series
(mm)
Autoclavable up to 135ºCWashable in the thermodisinfector
10 11Restorative & Prosthetics
Air D
riven
Coupler
Midwest 5 hole
Midwest4 hole
P1078
NSK(Optic)
X450L
P1088
NSK(Non-Optic)
X450
P1079
KaVo®
X450KL
P1093
Fixed-back(Optic)
X450 5H
P1092
Fixed-back(Non-Optic)
X450 M4
Unique 45-degree angled head provides a high level of accessibility
Connect to NSK Couplers
Triple Water Jet
COUPLER OPTIONS
Model
Order Code
• Power : 21 W • Speed : 380,000~450,000 min-1 • Head Size : ø11.2 x H13.5 mm • 45˚ Angle Head
• Titanium Body with Scratch Resistant DURACOAT • Ceramic Bearings • Push Button Chuck
• Triple Water Jet • Clean Head System • Cellular Glass Optics • For FG extra-long burs (25mm) only
NON-OPTIC
OPTIC MODEL : ORDER CODE : X450L P1078
MODEL : ORDER CODE : X450 P1088
The 45-degree angled head offers a high level of accessibility and visibility during root separation procedures and the removal of hard tissue covering impacted third molars.
High Accessibility
KaVo® LED Coupler
NSK Couplers(PTL type)
Autoclavable up to 135ºCWashable in the thermodisinfector
12 13Restorative & Prosthetics
Single Spray
Air D
riven
Miniature Head
• Speed : 380,000~450,000 min-1 • Head Size : ø10.6 x H12.4 mm • Stainless Steel Body
• Ceramic Bearings • Push Button Chuck • Quattro Spray • Clean Head System • Midwest 4 hole
Standard Head
• Speed : 340,000~410,000 min-1 • Head Size : ø12.1 x H13.3 mm • Stainless Steel Body
• Ceramic Bearings • Push Button Chuck • Quattro Spray • Clean Head System • Midwest 4 hole
Quattro Spray
Quattro Spray
Standard Head
• Speed : 400,000~450,000 min-1 • Head Size : ø10.3 x H13.5 mm • Stainless Steel Body
• Ceramic Bearings • Push Button Chuck • Single Spray • Clean Head System • Midwest 4 hole
MODEL : ORDER CODE : PAP-MU M4 P1021NON-OPTIC
MODEL : ORDER CODE : PAP-SU M4 P1022NON-OPTIC
MODEL : ORDER CODE : PAX-SU M4 P560NON-OPTIC
Autoclavable up to 135ºCWashable in the thermodisinfector
14 15Restorative & Prosthetics
NSK COUPLERS NSK AIR DRIVEN COUPLER OPTIONS BY SERIES
Ti-Max Z
Ti-Max X
S-Max M
S-Max pico
Ti-Max X450
Coupler Type
KaVo® LED Coupler
W&H® Roto Quick
(RA Type)
W&H®W&H®
NSK Couplers(PTL type)
Midwest 4 hole
Midwest 5 hole
LUX Coupler
LUX Coupler
• Stainless Steel Body • Titanium coating • Non-Retraction Valve
• For NSK • LED incorporated in coupler
OPTIC MODEL : ORDER CODE : PTL-CL-LED P1001600
• Stainless Steel Body • Titanium coating • Non-Retraction Valve
• For KaVo® MULTIflex® LUX with water volume adjuster • LED incorporated in coupler
OPTIC MODEL : ORDER CODE : KCL-LED P1005600
• Stainless Steel Body • Titanium coating • Non-Retraction Valve
OPTIC MODEL : ORDER CODE : PTL-CL-FV-T P380081
• Stainless Steel Body • Titanium coating • Non-Retraction Valve
MODEL : ORDER CODE : FM-CL-M4-T P434081NON-OPTIC
Ge
ne
ral s
erie
sSp
ec
ialit
y se
ries
-
-
-
-•
-
-
-
-•
NSK(Optic)
••••
•
NSK(Non-Optic)
-•-
-
•
KaVo®
(Optic)
••••
•
KaVo®
(Non-Optic)
-•-
-
-
W&H® Roto Quick
(RQ Type)
16 17Restorative & Prosthetics
Co
up
lers
THE NEW STYLEELECTRIC
Contra-Check Function (Proprietary to NSK)“Contra-Check Function” helps detect abnormalities caused by deterioration of the electric attachment and insufficient maintenance before use. Our advanced function is the result of NSK's relentless pursuit of safe treatment. *NSK's Ti-Max Z, X and S-Max M electric attachments are compatible with “Contra-Check Function”.
Higher* Performance with Compact Size
Mounting Accessories
MODEL : ORDER CODE : Z1321NLZ STAY
MODEL : ORDER CODE : Z1323NLZ MOUNTING PLATE
MODEL : ORDER CODE : E1152062NLZ CDL
Our existing model
2,000 - 40,000 min-1
3.4 Ncm
100 - 40,000 min-1
4.2 Ncm
○(NLZ E)
-
Number of rotations
Max Torque
Correspondingmodel to endodontic
mode
MotorSpecs
Flexible Installation Style with Higher* Visibility& Operability in a Compact Design
Cutting
ReverseRotate iteratively in various angles.
Compatible with the Dentsply Sirona Endodontics reciprocating file: WAVEONE(TM) GOLD. WAVEONE®, from Dentsply Sirona, sets new standards in Endodontics, by bringing simplicity to the root canal shaping procedure, using only one NiTi instrument per root canal in most cases. The global shaping time is thus decreased by up to 40% versus a traditional continuous rotary technique. The new NLZ Endo motor has a reciprocating function which allows to work in the WAVEONE® reciprocating mode. A large rotating angle in the cutting direction provides high efficiency, whereas a smaller angle in the reverse direction allows the WAVEONE® file to safely progress along the canal path, whilst reducing the risk of a screwing effect and file breakage.
Endodontic reciprocating function
Speed : 100 – 40,000 min-1, Max. Torque : 4.2 Ncm
Electric Micromotor System BRUSHLESS
Internal Water SprayOPTIC
Contents : • NLZ U (Control Unit & Main Unit) • NE180 (AC adaptor) • NLZ (Motor) • NLZ CD (Motor Cord) • NLZ U BRACKET
MODEL : ORDER CODE : Y1003735NLZ S120
Contents : • NLZ E U (Control Unit & Main Unit) • NE180 (AC adaptor) • NLZ (Motor) • NLZ CD (Motor Cord) • NLZ U BRACKET
MODEL : ORDER CODE : Y1003736NLZ E S120
Specifications :
• Dimension Control Unit : W76 × D87.1 × H63.4 mm• Dimension Main Unit : W146 × D75 × H48 mm• Power Supply : 120 V 50/60 Hz• Programs : General Application Mode / 6 programs Rotary Endo Mode / 6 programs
Unit• Motor Type : Brushless Micromotor• Endodontics Torque : 0.3 - 6.0 Ncm*• Dimension : ø22 × H68.8 mm• Weight : 59 g (motor only)• Light : White LED
MotorGeneral Application Function
Rotary Endo Mode Function
Recipro Endo Mode Function *
Depending on gear ratio* The "Reciprocating Endo Mode" can be operated only with the NLZ Endo Contra-angle handpiece and WAVE® ONE file.
*
6:1 Reduction
MODEL : ORDER CODE : NLZ Endo C1130NON-OPTIC
• Max Speed: 1,000 min-1 • For engine files (ø2.35) • Push Button Chuck
Endodontic Handpiece
*Compared to our existing model.
THE COMPACT MAKES A BIG CHANGE
Autoclavable up to 135ºCWashable in the thermodisinfector
Elec
tric M
oto
rs
18 19Restorative & Prosthetics
Quattro Spray
Single Spray
Single Spray
13.4
8.9
13.4
8.9
The Ti-Max Z Series of handpieces feature smaller head and slimmer neck dimensions compared to other products on the market, improving operational visibility based on non-clinical evaluations.
SMALLER HEAD & SLIMMER NECK
Electric Attachment Series
Higher Durability*The Z95L gears have been designed using High Spec 3D simulation software to achieve optimal results in terms of durability. In addition,
special DLC Coating (Diamond-Like-Carbon) is applied to the gear to dramatically increase durability.*
*Compared to our existing model.
1:1 Direct Drive
• Max Speed: 40,000 min-1 • For CA burs (ø2.35) • Titanium Body with Scratch Resistant DURAGRIP
• Push Button Chuck • Single Spray • Microfilter • Clean Head System
• Cellular Glass Optics
OPTIC MODEL : ORDER CODE : Z25L C1038
*For short shank burs only
1:5 Increasing
• Miniature Head • Max Speed: 200,000 min-1 • For FG burs (ø1.6)*
• Titanium Body with Scratch Resistant DURAGRIP • Push Button Chuck • Single Spray
• Ceramic Bearings • Microfilter • Anti Heat System • DLC Coating • Clean Head System
• Cellular Glass Optics
OPTIC MODEL : ORDER CODE : Z85L C1062
1:5 Increasing
• Max Speed: 200,000 min-1 • For FG burs (ø1.6) • Titanium Body with Scratch Resistant DURAGRIP
• Push Button Chuck • Quattro Spray • Ceramic Bearings • Microfilter
• Anti Heat System • DLC Coating • Clean Head System • Cellular Glass Optics
OPTIC MODEL : ORDER CODE : Z95L C1034
Smaller and SlimmerZ95L has the smaller head and slimmer neck dimensions.
13.913.4 15.0
8.9
8.0 9.3 8.4
10.3 9.6
NSK Z95L Competitor A Competitor B
(mm)
11.913.4
Z85LZ95L
Head size comparisonZ85L offering excellent visibility and accessibility.
(mm)
Autoclavable up to 135ºCWashable in the thermodisinfector
Electric &
slow
spe
ed
s
20 21Restorative & Prosthetics
Quattro Spray
High Accessibility Enables a Vast Variety of Clinical Applications
You can gain a comfortable finger rest without stress thanks to the extra space the slim Ti-Max Z45L creates between the front teeth. It is also easy to maintain the bur at an optimal angle and achieve precise sectioning, even when the operating depth is close to apex.
Sectioning a Mandibular Left Impacted Third Molar
When working on the palatal side of a second premolar, Ti-Max Z45L ensures that you can operate smoothly and have plenty of working space between the maxillary adjacent teeth.
Caries Removal from a Maxillary Left Second Premolar on Palatal Side
Securing a solid finger rest on a front tooth enables stable cutting without interference from other teeth. Since you can also freely control the angle of the bur, minimal intervention treatments are also possible.
Caries Removal from a Maxillary Left Lateral Incisor's Cervical Area
Ti-Max Z45L enables you to prep smoothly without interference from the rubber dam clamp. Its flexibility also makes treatments safer and more precise.
Clarifying the Root Canal Orifice of a Mandibular Right Second Premolar
Two-Way Spray FunctionThe world’s first two-way spray function allows you to instantly choose a mist or jet spray depending on the conditions and procedure with an enclosed dedicated tool. The water jet spray prevents subcutaneous emphysema in surgical procedures, and the mist spray effectively cools the bur while cutting.
Ti-Max Z45L provides effortless access to hard-to-reach molars that a standard
electric attachment handpiece simply cannot match.
The slim Ti-Max Z45L also offers high visibility and operability, creating
more space between adjacent teeth and the handpiece body.
Ti-Max Z45L’s powerful and consistent cutting shortens treatment
time for time-consuming sectioning and third-molar extractions,
compared to standard electric attachment handpieces,
reducing stress for both clinicians and patients.
In addition, Ti-Max Z45L boasts the world’s first two-way
spray function, making it suitable for a wide range
of procedures, such as third-molar preparation
and clarifications of the root canal orifice.
THE WORLD’S FIRST 45˚1:4.2 Increasing
• Max Speed: 168,000 min-1 • For FG burs (ø1.6) • 45˚ Angle Head
• Titanium Body with Scratch Resistant DURAGRIP • Ceramic Bearings • Push Button Chuck
• Quattro Spray (Water Jet / Mist) • Microfilter • Anti Heat System • DLC Coating
• Clean Head System • Cellular Glass Optics
OPTIC MODEL : ORDER CODE : Z45L C1064
High AccessibilityThe 45-degree angled head allows easy access to the molar region, reducing interference from the front teeth and adjacent teeth.
Standard electricattachment handpiece
Water Jet Mist Autoclavable up to 135ºCWashable in the thermodisinfector
Electric &
slow
spe
ed
s
22 23Restorative & Prosthetics
Quattro Spray
Single Spray
1:5 Increasing
• Max Speed: 200,000 min-1 • For FG burs (ø1.6) • Titanium Body with Scratch Resistant DURAGRIP
• Push Button Chuck • Quattro Spray • Ceramic Bearings • Microfilter
• Anti Heat System • DLC Coating • Clean Head System • Cellular Glass Optics
OPTIC MODEL : ORDER CODE : nano95LS C1099
1:1 Direct Drive
• Max Speed: 40,000 min-1 • For CA burs (ø2.35) • Titanium Body with Scratch Resistant DURAGRIP
• Push Button Chuck • Single Spray • Microfilter • Clean Head System • Cellular Glass Optics
OPTIC MODEL : ORDER CODE : nano25LS C1100
SMALL IN SIZE, WELL-BALANCEDThe‘nano series’ delivers on the high-performance standards
of NSK contra-angles, but are 10% smaller and lighter than
conventional models. Used in conjunction with the NLZ
micromotor system, the nano series gives you high
maneuverability like an air turbine, ensuring more
accurate treatments.
Balanced DesignReduces fatigue during procedures and improves fingertip dexterity.
Smaller, Slimmer and Lighter.
-9.5 mm
-3.7g
Higher Durability*The nano95LS gears have been designed using High Spec 3D simulation software to achieve optimal results in terms of durability. In addition, special
DLC Coating (Diamond-Like-Carbon) is applied to the gear to dramatically increase durability.**Compared to our existing model.
Autoclavable up to 135ºCWashable in the thermodisinfector
Electric &
slow
spe
ed
s
24 25Restorative & Prosthetics
Straight Handpiece
Single Spray
Quattro Spray Single Spray
Single Spray
Single Spray
1:5 Increasing
• Max Speed: 200,000 min-1 • For FG burs (ø1.6) • Titanium Body with Scratch Resistant DURACOAT
• Push Button Chuck • Ceramic Bearings • Quattro Spray • Microfilter • Clean Head System • Cellular Glass Optics
OPTIC MODEL : ORDER CODE : X95L C600
*For short shank burs only
1:5 Increasing
• Max Speed: 200,000 min-1 • For FG burs (ø1.6)* • Miniature Head • Titanium Body with Scratch Resistant DURACOAT
• Push Button Chuck • Ceramic Bearings • Single Spray • Microfilter • Clean Head System • Cellular Glass Optics
OPTIC MODEL : ORDER CODE : X85L C604
1:1 Direct Drive
• Max Speed: 40,000 min-1 • For CA burs (ø2.35) • Titanium Body with Scratch Resistant DURACOAT
• Push Button Chuck • Single Spray • Microfilter • Clean Head System • Cellular Glass Optics
OPTIC MODEL : ORDER CODE : X25L C601
*Need to insert the supplied bur stopper
1:1 Direct Drive
• Max Speed: 40,000 min-1 • For HP burs (ø2.35) • For CA burs (ø2.35)* • Titanium Body with Scratch Resistant DURACOAT
• Single Spray • Clean Head System • Cellular Glass Optics
OPTIC MODEL : ORDER CODE : X65L H273
1:1 Direct Drive
• Max Speed: 40,000 min-1 • For FG burs (ø1.6) • Titanium Body with Scratch Resistant DURACOAT
• Push Button Chuck • Single Spray • Microfilter • Clean Head System • Cellular Glass Optics
OPTIC MODEL : ORDER CODE : X20L C605
4:1 Reduction
• Max Speed: 10,000 min-1 • For CA burs (ø2.35) • Titanium Body with Scratch Resistant DURACOAT
• Push Button Chuck • Single Spray • Microfilter • Clean Head System • Cellular Glass Optics
OPTIC MODEL : ORDER CODE : X15L C602
Autoclavable up to 135ºCWashable in the thermodisinfector
Electric &
slow
spe
ed
s
26 27Restorative & Prosthetics
Single Spray
Quattro Spray • Max Speed: 200,000 min-1 • For FG burs (ø1.6) • Stainless Steel Body • Push Button Chuck
• Ceramic Bearings • Quattro Spray • Clean Head System • Cellular Glass Optics
1:5 Increasing
NON-OPTIC
OPTIC MODEL : ORDER CODE : M95L C1023
MODEL : ORDER CODE : M95 C1026
• Max Speed: 40,000 min-1 • For CA burs (ø2.35) • Stainless Steel Body • Push Button Chuck
• Single Spray • Clean Head System • Cellular Glass Optics
1:1 Direct Drive
OPTIC MODEL : ORDER CODE : M25L C1024
MODEL : ORDER CODE : M25 C1027NON-OPTIC
Straight Handpiece
Straight Handpiece
1:1 Direct Drive
MODEL : ORDER CODE : M65 H1008NON-OPTIC
• Max Speed: 40,000 min-1 • For HP burs (ø2.35) • For CA burs (ø2.35)* • Stainless Steel Body
• Single Spray • Clean Head System *Need to insert the supplied bur stopper
1:1 Direct Drive
MODEL : ORDER CODE : FX65 H1014002NON-OPTIC
• Max Speed: 40,000 min-1 • For HP burs (ø2.35) • Aluminium Body • Clean Head System
4:1 Reduction
MODEL : ORDER CODE : FX57 C1054002NON-OPTIC
• Max Speed: 5,000 min-1 • For screw-in cups and brushes • Aluminium Body • 360° Rotation
• Paste Defense System • w/o Spray
1:1 Direct Drive
MODEL : ORDER CODE : FX25 C1052002NON-OPTIC
• Max Speed: 40,000 min-1 • For CA burs (ø2.35) • Aluminium Body • Ball Bearing
• Push Button Chuck • Clean Head System Easy Cartridge Replacable
Paste Defense System
Autoclavable up to 135ºCWashable in the thermodisinfector(Exclude FX25, FX57, FX65)
Electric &
slow
spe
ed
s
28 29Restorative & Prosthetics
Heads for General Application Heads for Prophylaxis Application Handpieces
Handpieces and heads are sold separately. You can combine handpieces and heads according to your preference and speed required for the indication.
Straight Handpiece
• Max Speed: 40,000 min-1 • For CA burs (ø2.35)
• Clean Head System • Push Button Chuck
• Ball Bearing
MODEL : ORDER CODE : FPB-Y C875NON-OPTIC
• Max Speed: 5,000 min-1
• For screw-in cups and brushes
MODEL : ORDER CODE : AR-Y (S) C187NON-OPTIC
• Max Speed: 5,000 min-1 • For snap-on cups
MODEL : ORDER CODE : AR-Y (K) C188NON-OPTIC
• 1:1 Direct Drive
MODEL : ORDER CODE : ECM C100007MODEL : ORDER CODE : EC C100008
• 4:1 Reduction
MODEL : ORDER CODE : ER4 C634
• 10:1 Reduction
MODEL : ORDER CODE : ER10 C635
• 16:1 Reduction
MODEL : ORDER CODE : ER16 C636
• 64:1 Reduction
MODEL : ORDER CODE : ER64 C637
Heads for Endodontic Application
• Max Speed: 20,000 min-1 • Miniature Head
• Push Button Chuck
MODEL : ORDER CODE : MP-Y C547NON-OPTIC
• Max Speed: 4,000 min-1 • 80° Twist
• For engine files (ø2.35) • Push Button Chuck
MODEL : ORDER CODE : TEQ-Y C849NON-OPTIC
• Max Speed: 30,000 min-1 • For CA burs (ø2.35)
• Latch type
MODEL : ORDER CODE : NAC-Y C032002NON-OPTIC
• For EX-5B (Optional)
MODEL : ORDER CODE : Spray Nozzle H019711
• Max Speed: 40,000 min-1 • For CA burs (ø2.35)
• Latch type • Ball Bearing
MODEL : ORDER CODE : BB-Y C037NON-OPTIC • Max Speed: 10,000 min-1 • For Eva tips
• Vertical Reciprocating (Stroke Length 1.4mm)
MODEL : ORDER CODE : EVA-Y C235NON-OPTIC
• Max Speed: 30,000 min-1 • For CA burs (ø2.35)
• Miniature Head • Latch type
MODEL : ORDER CODE : NM-Y C247NON-OPTIC
• Max Speed: 40,000 min-1 • For FG burs (ø1.6)
• Clean Head System • Push Button Chuck
MODEL : ORDER CODE : FFB-Y C884NON-OPTIC
• Max Speed: 3,000 min-1 • For CA burs (ø2.35)
• Clean Head System • Push Button Chuck
• 10:1 Reduction
MODEL : ORDER CODE : NRS2-Y C549NON-OPTIC
4:1 Reduction
• Max Speed: 10,000 min-1 • For HP burs (ø2.35)
• Clean Head System
MODEL : ORDER CODE : EX-5B H262NON-OPTIC
EX SERIES HEADS & HANDPIECES External Water Spray
Autoclavable up to 135ºCWashable in the thermodisinfector (Exclude NAC-Y, BB-Y, NM-Y, EC, ER4, ER10, ER16, ER64 and EX-5B)
Electric &
slow
spe
ed
s
30 31Restorative & Prosthetics
360˚ swivel
NSK AIR MOTORSProphylaxis Air Motor
THE FUTURE OF THE DENTAL HYGIENE HANDPIECE
The handpiece's unique two-part construction allows for just the nosecone portion to be sterilized for proper disinfection and compliance. Additional nosecones may be purchased separately (see Parts and Accessories section for item detail).
Nosecone separates from motor
iProphy Air / 109mm, 74g ø19.6mm
Competitor / 120mm, 79g ø23.4mm
The iProphy Air handpiece is designed using NSK's method. This slim, short and light handpiece provides good balance and less fatigue for the Dental Hygienist.
Slimmer, Shorter and Lighter
Noise Generated Vibration Generated Nosecone separates from motor
Leading competitor's handpiece
iProphy Air 65dBA
68dBA
79dB Yes
88dB
Noise Generated Vibration Generated
65dB68dB
79dB
88dBLeading competitor's handpieceiProphy Air
0
90
80
70
60
Noise
Vibration
65dB
68dB
Leading competitor's handpiece
iProphy Air
0 90807060
79dB
88dB
iProphy AirLeading competitor's handpiece
60 70 80 900
Noise
Vibration
65dB
68dB
79dB
88dB
Smooth and QuietNSK ultra-precision micro machining technology has been applied to all parts of iProphy Air reducing vibration & noise to lower levels, level resulting in improved comfort for patients and the Dental Hygienist.
Internal Water Spray
• Max. 20,000 min-1 • Midwest 4 hole • Non-Retraction Valve
• Handpiece Connection Type:ISO 3964 Type1, Type2 (Non-optic handpiece only)
MODEL : ORDER CODE : IS-205 M4 M156NON-OPTIC
External Water Spray
• Max Speed: 22,000 min-1 ±10% • Midwest 4 hole • Non-Retraction Valve
• Handpiece Connection Type:ISO 3964 Type1, Type2 (Non-optic handpiece only)
MODEL : ORDER CODE : FX205 M4 M1005002NON-OPTIC
No Water Spray
• Max Speed: 22,000 min-1 ±10% • Midwest 4 hole
• Handpiece Connection Type:ISO 3964 Type1, Type2 (Non-optic handpiece only)
MODEL : ORDER CODE : FX204 M4 M1003002NON-OPTIC
Internal Water Spray
• Max. 20,000 min-1 • LUX Coupler
• Non-Retraction Valve
MODEL : ORDER CODE : Ti205L M190OPTIC
Contents : • iPA-HP • iPA • iProphy Air Color Ring Set (Pack of 4)
• Max Speed: 3,000 min-1 • Midwest 4 hole
MODEL : ORDER CODE : iProphy Air M1020NON-OPTIC
Autoclavable up to 135ºC
Air M
oto
rs
32 33Restorative & Prosthetics
AUTOMATICALLY LUBRICATESMaintaining handpieces can be as simple as touching a button. The appropriate lubrication is applied according to
the type of handpiece selected. The chuck-lubricating function allows the dentist to effectively lubricate the chuck.
Regular maintenance extends the operating life and the optimal condition of the handpiece.
The solution for handpiece care is iCare.
• Preset oil volume based on handpiece type
• Consistent lubrication with simple operation
• Chuck lubricating function ensures that the chuck is thoroughly lubricated
• Low oil cost per handpiece provides a lower lifetime operating cost
• Stylish & compact body that can be installed with limited space
Advantages
MODEL : ORDER CODE :
MODEL : ORDER CODE :
MODEL : ORDER CODE :
MODEL : ORDER CODE :
MODEL : ORDER CODE :
MODEL : ORDER CODE :
MODEL : ORDER CODE :
MODEL : ORDER CODE :
iCare ADAPTORS • For NSK Air Driven Handpieces for NSK Phatelus / Mach Coupler
• For KaVo® Air Driven Handpieces for MULTIflex® LUX Coupler
• For Sirona® Air Driven Handpieces for Quick Coupler
• For W&H® Air Driven Handpieces for Roto Quick Coupler (RQ Type)
• For Bien-Air® Air Driven Handpieces for Unifix® Coupler
Check with the dealer for the adaptors to mount other manufactures’ handpieces.
• For W&H® Air Driven Handpieces for Roto Quick Coupler (RA Type)
• For MIDWEST® Air Driven Handpieces for 5-Hole Coupler
PTL Adaptor
KV Adaptor
SR Adaptor
WH Adaptor
BA Adaptor
WHL Adaptor
MWL Adaptor
STL Adaptor • For StarDental® Air Driven Handpieces for HiFlo® Fiber-Optic Swivel (4-Hole F.O.) Coupler
Z257010
Z257020
Z257023
Z257021
Z280022
Z280053
Z280052
Z280051
Enhanced lubricating ability facilitates the complete removal of dirt and foreign substances from internal parts and between the teeth of the gears in the handpiece.
Automated lubrication of handpieces is performed with the simple touch of buttons. Simple operation is achieved by preset oil volumes for Air Driven, Electric & slow speed handpieces.
Lubrication Simplified
iCare COMPLETE SETS
• iCare unit • Power cord • Chuck Lubricating Nozzle • Air tube
• Maintenance oil for iCare (1 L) • Mist filter set • Oil absorber sheet
Contents :
Specifications :
• Power Supply : AC 100-240V 50/60Hz
• Air Pressure : 0.5-0.6 MPa (5.0-6.0 kgf/cm2)
• Weight : 6.5 kg (C2 type / C3 type)
• Dimension : W280 x D240 x H350 (mm)
• Solution Tank Capacity : 1.2 L
Connects only to Midwest 4-hole type Air piping is necessary (5.0-6.0 kgf/cm2)
• Do not use iCare to lubricate air scalers and Phatelus air motors. The iCare lubricating system is not designed to lubricate those particular products. Maintain air scalers and Phatelus air motors as described in the operation manual for each product.
• If blood infiltrates inside a handpiece, iCare may not totally lubricate the internal handpiece components, and internal blood coagulation may cause product failure. In this case, NSK recommends to immediately lubricate those handpieces with PANA SPRAY Plus.
Dual Standard Connectors + Dual Rotation Connectors
MODEL : ORDER CODE : iCare C2 Type Y1002796
Single Standard Connector + Triple Rotation Connectors
MODEL : ORDER CODE : iCare C3 Type Y1002797
PANA SPRAY Plus is a specially formulated, highly effective general handpiece and air motor cleaning lubricant. Frequent application of PANA SPRAY Plus will assure handpiece and air motor performance and durability. Apply PANA SPRAY Plus every time before autoclaving any handpiece or air motor.
PANA SPRAY Plus
• For Air driven, Electric & slow speed handpieces and air motors
• 10.5 oz
• Alcohol-contained lubricant
MODEL : ORDER CODE : PANA SPRAY Plus Z182600
The chuck lubricating function allows dentists to effectively lubricate the chuck.
Chuck Lubricating FunctionSince iCare is equipped with a large tank (1.2 L capacity), making refilling the tank one easy step and eliminates the possibility of spills and need to store excess oil.
Large Oil TankPurge cycle time can be adjusted to 3 different pre-set selections according to user preference and usage.
Multiple Air Purge Settings
*Typical setting is M
*
Ma
inte
na
nc
e
34 35Restorative & Prosthetics
SPARE PARTS
Autoclavable up to 135ºC
Spa
re Pa
rts
*E-Type: Conformable to ISO3964.
Ti-Max Z
iProphy Air
iCare
PANA SPRAY Plus Nozzles
S-Max M
FX Series
S-Max pico
Pana-Max PLUS
PANA-MAX
EX Series
Ti-Max X Ti-Max X450
Couplers
KaVo® and MULTIflex® LUX are registered trademarks of Kaltenbach & Voigt GmbH & Co.Sirona® is a registered trademark of Sirona Dental Systems GmbH.W&H® is a registered trademark of W&H Dentalwerk Bürmoos GmbH. Bien-Air® and Unifix® are registered trademarks of Bien-Air Dental S.A.MIDWEST® is a registered trademark of DENTSPLY International Inc.StarDental® and HiFlo® are registered trademarks of DentalEZ Inc.
Y900580
M1020006
U433135
Z090059
U508352
Z090060
Z090061
Y900580
P1140500
P1001500
P1001500
H019711
20002803
P1002500
Y900580
M1020005
Z016130
P183090
Y900159
Z090051
Z090054
P1001250
P1140200
P1001250
P1002250
C1052500
Y900580
P1002250
Y900580
Y1002594
Z257301
Z019090
U1120118
P1002500
P401054
20000535
P074765
C185C751
C071751
U1142002
U1141002
Z166101
P074050
C032701
C039701
H019711
C875012
Z1259080
Y141133
U438550
Z1322
C032012
Y900772
C875060
C030011
C037015
C210015
Y1003728
D0312010050
E1152051
E1152061
C884060
20000535
PTL O-ring Set(Pack of 5)
iPA
Oil Absorber Sheet
(Pack of 10)
WHL NozzleFor W&H® Roto Quick
(RA Type)
Air Filter
MWL NozzleFor MIDWEST® 5-Hole Coupler
STL NozzleFor StarDental® HiFlo®
Fiber-Optic Swivel (4-Hole F.O.) Coupler
PTL O-ring Set(Pack of 5)
C1052702FX Spray nozzle
For FX25
SX-PU04Head cap for S-Max pico
SX-MU04Head cap for
Miniature head
SX-MU04Head cap for
Miniature head
Spray nozzleFor FX65
SX-PU05Head cap wrench
for S-Max pico
SX-SU04Head cap for
Standard head
PTL O-ring Set(Pack of 5)
iPA-HP
Maintenance Oil for iCare
(1 Bottle, 1 Liter)
Phatelus Spray NozzleFor Air driven attachments and
air motors which attach to Phatelus and Mach Coupler
Mist Filter Set(Pack of 12)
KV NozzleFor KaVo®
MULTIflex® LUX
WH NozzleFor W&H® Roto Quick
(RQ Type)
SX-MU03Cartridge for
Miniature head
SX-PU03Cartridge forS-Max pico
SX-MU03Cartridge for
Miniature head
SX-SU03Cartridge for
Standard head
FX25-04Head cap for
FX25
PTL O-ring Set(Pack of 5)
SX-SU03Cartridge for
Standard head
PTL O-ring Set(Pack of 5)
iProphy Air Color Ring Set
(Pack of 4)
Chuck Lubricating Nozzle
E-Type Spray Nozzle
For E-Type* attachments
HP Head Filter(Pack of 200)
SX-SU04Head cap for
Standard head
Non-Retraction Valve
SX-SU05Head cap wrench for Miniature head & Standard head
PAX-SU05Head cap wrench for standard head
Cap WrenchFor AR-Y(S)
NLZ E U
Cap Wrench(Black)
NLZ U
Tube (RSM)
PAX-SU04Head cap for
standard head
Spray NozzleFor NAC, BB, FPB,
FFB, TEP
Purge Nozzle
Spray Nozzle For NM
NLAC (120V)
Spray NozzleFor EX-5B
AC Power Cord
FPB-02Middle Gear
NLZ U BRACKET
NAC-02Middle Gear
PAX-SU03Cartridge for standard head, includes O-ring
& wave washer
FPB-03Cartridge for FPB
O-ring Set
NAC-03Cartridge for NAC
O-ring
BB-03Cartridge for BB
NLZ
NBB-03Cartridge for
NBBW
NLZ CD
FFB-03Cartridge for FFB
SX-SU05Head cap wrench for Miniature head & Standard head
Z166101Tube (RSM)
MODEL PRODUCTS ORDER CODE MODEL PRODUCTS ORDER CODE MODEL PRODUCTS ORDER CODE MODEL PRODUCTS ORDER CODE MODEL PRODUCTS ORDER CODE MODEL PRODUCTS ORDER CODE
NLZ