Recessed LightingCalifornia Title 24-2017 Summary

Residential Lighting Standards OverviewEffective: January 1, 2017

Surface LED Luminaire LED DownlightLED Adjustable Downlight

Halo

RL Series RL4 and RL56 - 4" and 6" LED Downlight

• 600 lumen Series, 900 lumen Series, 1200 lumen Series• 9.0W - 10.5W (per size, CRI and CCT), 7.3W - 18.0W (per size, CRI and CCT); 120V• 2700K, 3000K, 3500K, 4000K, 5000K CCT, 90 CRI • Rated for use in Type IC, airtight, Halo LED housings• Accessory trims: White, Satin Nickel, and Tuscan Bronze finishes• Dimmable to 5% with select dimmers• Damp and wet location listed (shower rated)• AIR-TITE certified per ASTM-E283.-4• Diffusing, regressed lens• Flicker Free per JA10• R9 >50• Five-year warranty

JA8-2016-E

LT Series LT4 and LT56 - 4" and 5”/6" LED Retrofit Module

• 600 Lumen Series• 8.0W - 10.4W (per size, CRI and CCT); 120V • 2700K, 3000K, 3500K, 4000K, 5000K CCT, 90 CRI• Rated for use in Type IC, airtight, Halo LED housings• Dimmable to 10% with select dimmers• Damp and wet location listed (Shower rated)• AIR-TITE certified per ASTM-E283.-4• Flicker Free per JA10• R9 >50• Five-year warranty

JA8-2016-E

RA Series RA4 and RA56 - 4" and 6" LED Adjustable Downlight

• 600 Lumen Series• 10W, 120V• 2700K, 3000K CCT, 90 CRI • Adjustable gimbal; 35º tilt, up to 360º rotation• Rated for use in Type IC, airtight, Halo LED housings• Beam distribution options: NFL (Narrow Flood 25º) and VWFL (Very Wide Flood 80º)• Dimmable to 5% with select dimmers• Damp location listed• AIR-TITE certified per ASTM-E283.-4• Field replaceable driver• Flicker Free per JA10• R9 >50• Five-year warranty

JA8-2016-E

HU10 Series Integrated LED Undercabinet

• 2700K, 3000K, 4000K CCT, 90 CRI• Sleek 3/4" profile - in White or Black• 9”, 18”, 24”, 36”, 48” lengths• Integral ON/OFF switch; fully dimmable with wall switch • 120V, Plug-in or direct wire with splice box• Link any combination of fixtures up to 450W total load• Damp location listed• Flicker free per JA10• Five-year warranty

JA8-2016

Vacancy Sensor Switches and DimmersVacancy Sensors allow users to manually turn ON the lights. The sensor will then automatically turn lights OFF when no presence is detected for a specified amount of time. These sensors ensure the highest level of energy savings since the lights will never automatically turn ON. These sensors and dimmers meet residential requirements for California Title 24. The models are Title 20 certified to the California Energy Commission Appliance Efficiency Database.

Models shown: Eaton Residential and Wiring Devices division

VS306U_ ........................Vacancy Sensor

TAL06P1_ .......................Toggle Dimmer

DAL06P_ ........................Decorator Dimmer

Controls Lighting Control Solutions

DAL06PVS306U TAL06P1

SLD Series - 4" and 6" Surface LED Downlight

• Surface mount to standard and fire-rated 4" x 2-1/8" junction boxes • May be used in 4", 5", or 6" Type IC, airtight, Halo LED housings • WaveStream™ LED Technology - Downlight cone-of-light performance - AccuAim™ optics for directional control• Lumens: SLD4: up to 800 lumens, SLD6: up to 800 lumens• Wattage: 12.2W-13.2W (per size, CRI, and CCT); 120V and 120V-277V models• 2700K, 3000K, 3500K, 4000K CCT, 90 CRI• Flicker Free per JA10• R9 >50• Five-year warranty

JA8-2016-E

SMD Series - 4" and 6" - Round and Square Surface Mount LED Downlight

• Surface Mount to standard and fire-rated 4"x2-1/8" junction box• May be used in 4", 5", or 6" Type IC, airtight Halo LED Housing• Lumens: SLD4: up to 810 lumens, SLD6: up to 815 lumens• Wattage: 9.5W - 10.3W (per size, CRI, and CCT); 120V• 2700K, 3000K, 3500K, 4000K, and 5000K CCT, 90 CRI• Accessory trims: White, Satin Nickel, and Tuscan Bronze finishes• Damp and wet location listed (shower rated)• Flicker Free per JA10• R9 >50• Five-year warranty

JA8-2016-E

ML4 Series 4” LED Downlighting System

• 900 lumens• 12.1W, 120V; 11.9W, 120V-277V• 2700K, 3000K, 3500K, 4000K CCT, 90 CRI• Field interchangeable module and optics• Precision molded TIR optics interchangeable NFL, FL, WFL• Universal voltage: 120V-277V input, 50/60Hz• Dimmable at 120V to 5% with select dimmers• Flicker Free per JA10• R9 >50• Five-year warranty

JA8-2016-E

ML56 Series LED 5" and 6" LED Downlighting System

• 600 Series: up to 700 lumens, 9.0 - 10.2 Watts, up to 78 LpW• 900 Series: up to 1000 lumens, 13.4 Watts, up to 75 LpW• 1200 Series: up to 1400 lumens, 17.5 Watts, up to 80 LpW• 2700K, 3000K, 3500K, 4000K CCT, 90 CRI• Rated for use in Type IC, airtight, Halo LED housings• 5" and 6" trim options fit standard and shallow housings• Universal voltage: 120V-277V input, 50/60Hz• Dimmable at 120V to 5% with select dimmers• Flicker Free per JA10• R9 >50• Five-year warranty

JA8-2016-E

H4 Gen2 Series 4" LED Downlight and Adjustable System

H4 LED Downlight System• Up to 900 lumens depending on color

temperature and trim selected• 2700K, 3000K, 3500K, 4000K CCT, 90 CRI• Wide selection of 4" trim options in

reflector and baffle trim styles availble with deep regressed dome lens or regressed Solite® lens.

• High efficacy system with LED housing, light engine and trim

• Flicker Free per JA10• R9 >50• Five-year warranty

H4 LED Adjustable Gimbal System• Up to 930 lumens depending on color

temperature and trim selected• 2700K, 3000K, 3500K, 4000K CCT, 90 CRI• Adjustable 0-35º tilt • Round and square gimbal style trims with

integral LED light engine• Interchangeable reflectors: 25º (included),

35º and 50º available• High efficacy system with LED housings

and gimbal trim/light engine • Flicker Free per JA10• R9 >50• Five-year warranty

JA8-2016-E

Note: Title 20 requirements apply to portable floor lamps

or table lamps

GaragesMust be high efficacy

and at least one luminaire controlled by a vacancy

sensor

Title 24 - 2017 Overview of Residential Lighting Standards

Effective: January 1, 2017HALO LED Recessed Lighting offers among the largest selection of recessed LED luminaires that meet Title 24 residential compliance requirements. The models are JA8 Certified to the California Energy Commission Appliance Efficiency Database and marked “JA8-2016-E”. Refer to https://cacertappliances.energy.ca.gov/Pages/ApplianceSearch.aspx and search “Lighting Products” under category and “2016 JA8 High Efficacy Lighting” under appliance type for the complete list of models.

Refer to CEC Title 24 Part 6 for complete code:2017 Building Energy Efficiency Standards and refer to the CEC Appliance Efficiency Database for specific LED listings.www.energy.ca.gov

Outdoor LightingOutdoor lighting attached to the

building must be high efficacy and controlled by motion sensor and

either a photocell or an astronomical time clock

BedroomsPermanently installed lighting

in bedrooms must be high efficacy and controlled by a vacancy sensor or a dimmer

Other Rooms**Permanently installed lighting

in “other rooms” must be high efficacy and controlled by vacancy sensor or a dimmer

HallwaysAll lighting must be high

efficacy that can be controlled by dimmers or vacancy sensors (optional)

Title 24 Residential High Efficacy Lighting• All areas must be high efficacy (LED, CFL, FL, HID)• High efficacy recessed luminaires may not have a medium screwbase socket• Pin-base CFL, linear fluorescent, Pulse-start MH, HPS and non-LED GU24 are allowed• LED Residential Luminaires > Must meet Title 24 and JA8 California Code > 45 lumens per watt or greater > Indoor LED nominal correlated color temperature (CCT) of 4000K or less > Minimum 90 Color Rendering Index (CRI) with R9 of 50 or greater > JA8-2016-E labeled for recessed, otherwise JA8-2016 labeled• All JA8 light sources must be controlled by a dimmer or vacancy sensor except hallway and

the one luminaire in four areas are required to have a vacancy sensor > Bathroom > Garage > Laundry > Utility

All Luminaires shall be switched with readily accessible controls that permit the luminaires to be manually switched ON and OFF.

Title 24 - 2017 Overview of Residential Lighting Standards

*Kitchens include dining areas when dining is on the same lighting circuit.**Other rooms: attics, home offices, dining, and family rooms.

Laundry and Utility RoomsMust be high efficacy and at least one

luminaire controlled by a vacancy sensor

Vacancy sensor: Manual on/automatic off occupancy sensor. Must be certified by the manufacturer to the CA Energy Commission Title 20 Appliance Efficiency Regulations.

Dimmer: Must be certified by the manufacturer to the CA Energy Commission Title 20 Appliance Efficiency Regulations.

Kitchens*Must be high efficacy

Kitchen Lighting ControlsIndependent controls are required:(JA8 light sources must be on a dimmer or vacany sensor)- Recessed lighting- Permanently installed undercabinet lighting- Linear fluorescent lighting- Uplights and task lighting

BathroomsMust be high efficacy and controlled by a

dimmer or vacancy sensor plus at least one luminaire controlled by a vacancy sensor

Permanently installedLED Undercabinet

Must be high efficacy with minimum 45 lumens per watt and be JA8 certified

Residential recessed luminaires:- UL Listed for IC, insulation contact- Non-screwbased socket- Certified airtight label per ASTM E283 test standards- Sealed gasket or caulk between luminaire and ceiling- High efficacy LED luminaires must meet minimum 45 lumens

per watt, JA8 certified and light source labeled JA8-2016-E

Halo

EatonHeadquarters1121 Highway 74 SouthPeachtree City, GA 30269P: 770-486-4800www.eaton.com/lighting

Canada Sales5925 McLaughlin RoadMississauga, Ontario L5R 1B8P: 905-501-3000F: 905-501-3172

Our Lighting Product BrandsHaloHalo CommercialPortfolioIRiSRSAMetaluxCoreliteNeo-RayFail-SafeMWSAmetrixShaperioLumarkMcGraw-EdisonInvueEphesusLumièreStreetworksAtLiteSure-Lites

Our Controls Product BrandsGreengateiLuminZero 88Fifth Light TechnologyiLight (International Only)

Eaton is a registered trademark.

All other trademarks are property of their respective owners.

Product availability, specifications,and compliances are subject tochange without notice.

© 2017 EatonAll Rights ReservedPrinted in USAPublication No. BR518030ENJanuary 2017