REPUBLIC OF BOLIVIACIVIL AVIATION AUTHORITY

AIRWORTHINESS DEPARTMENT

REPAIR STATION CERTIFICATECENTER OF MAINTENANCE

Number:: 145C/98/04/004

This certificate is granted to:

LurrHANSA TECHNIK AKTJEN6ESEll.SCHArr(LHT)

With installation in: GERMANYPlace: HAMBURGAddress: WEG BEIM JAGER 193

22813 HAMBURG·63

Having checked that it fulfills all the norms a1Ld regulati01ts emitted by the BolivianCAA related to Centers ofMaintenance ofAer01tautical material, this certificate enableto operate as such in the following classifications :

RADIOINSTRUMENTACCESSORYLIMITED AIRFRAMELIMITED POWERPLANTLIMITED EMERGENCY EQUIPMENTLIMITED SPECIALIZED SERVICES .,

~I . , -

, .I~'- ~'?'/~

P rdJ:WU. (jaJnu. «fra;;;tM1y OIRECTOR GENERAL OE

AERONAUTICA CIVIL

WITH LIMITATIONS THAT ARE INDICATED IN THE OPERATIONS SPECIFICATIONS

Place and Date issued: La Paz, 04/01198

REPUBLIC OF BOLIVIACIVIL AVIATION AUTHORllY

AIRWORTHINESS DEPARTMENT

Part: Maintenance

Certificate No.145C/98/04l004

Pag J of 7 .

REPAIR STATION OPERATIONS SPECIFICATIONSLimitations:

The rating(s) for the Center of Maintenance with certificate Number 145C/98/07/004is/are limited to the following:

!!l~.;''.-....-.. . .-~ .

RADIOINSTRUMENTACCESSORY

LIMITED RATINGS

AIRFRAME:

BOEINGAIRBUS

POWERPLANT

PRATT & WHITNEYGENERAL ELECTRICCFM INTERNATIONAL

Place and date issued: La Paz, 04/01/98

CLASS 1,,2, & 3CLASS 1, 2, 3, & 4CLASS 1, 2, & 3

- MODEL 727, AND 737 SERIES- MODEL A310 SERIES

- MODEL JT-8D SERIES- MODEL CF6 SERIES- MODEL CFM-56 SERIES

REPUBLIC OF BOLIVIACIVIL AVIATION AUTHORITY

AIRWORTHINESS DEPARTMENT

Part: Maintenance

Certificate No.145C/98/04l004

Pag 2 of 7. .•.••..

~';~A..f.~~~".?'

. D....AC.I!Ol!l/1A

REPAIR STATION OPERATIONS SPECIFICATIONS(CONTINUATION)

Limitations:

The rating(s) for the Center of Maintenance with certificate Number 145C/98/04l004is/are limited to the following:

LIMITED RATINGS: (Cont.)

SPECIALIZED SERVICES

COMPRESSED GAS CYLINDER HYDROSTATIC RETESTING- LIMITED TOCYLINDER HYDROSTATIC RETEST, MAINTENANCE AND CHARGING OFALL DOT SPECIFICATION CYLINDERS, METAL SAFETY RELIEF VALVEASSEMBLIES AND SAFETY RELIEF DEVICES LISTED IN LUFTHANSATECHNIK AKTIENGESELLSCHAFT (LHT) CAPABIUTY LIST DOCUMENTNUMBER HAM TQ-RJFAAJ03, DATED SEPTEMBER 20, 1995, AS REVISED. ALLMAINTENANCE TO BE PERFORMED IN ACCORDANCE WITH THEAPPLICABLE MANUFACTURER MAINTENANCE MANUALS ANDCOMPRESSED GAS ASSOCIATION'S INC. COMPRESSED GAS CYLINDERPAMPHLETS, AS REVISED.

LUFTHANSA TECHNIK ANTIENGESELSCHAFT (LHT) MUST MAINTAIN THEEQUIPMENT AND TECHNICAL CAPABILITY REQUIRED, FOR ORIGINALCERTIFICATION, AB AN AUTHORIZED UNITE STATES DEPARTMENT OFTRANSPORTATION (DOT) CYLINDER RETEST FACILITY, DOT NUMBER C­772, DATED APRIL 22, 1994.

ALL PRESSURE CYLINDERS MUST CONFORM TO THE STANDARDS FAA.

Place and date issued: La Paz, 04/01198

Certificate Na.145C/98/04l004

Pag 3 af 7 .

REPUBLIC OF BOLIVIACIVIL AVIATION AUTHORITY

AIRWORTHINESS DEPARTMENT

Part: Maintenance

REPAIR STATION OPERATIONS SPECIFICATIONSLimitations:

The rating(s) for the Center of Maintenance with Certificate Number 145C/98/04/004is/are limited to the following:

LIMITED RATINGS: (Cont)

SPECIAIJZED SERVICES:

NONDESTRUCTlVE TESTING& INSPECTION

RADIOGRAPHIeMAGNETIC PARTICLELIQUID PENETRANTFLUORESCENTPENETRANTCONTRASTDYEPENETRANTEDDY CURRENTHARDNESS & ELECTRICALCONDUCTIVITYULTRASONICSURFACE-TEMPER ETCH

ALL SPECIFICATIONSIPROCESSES(AS REVISED AND FM APPROVED)

- MIL-STD-453C, AMS 26350.• ASTM.E.1444.- AMS.E.1417, AMS 2645H, AMS 2646C.-AMS2645H·AMS2646C.- ASTM-R-215

- MIL-1-1537B, AMS 2658- AMS 2630A, AMS 2632- AMS 2649.

ALL NONDESTRUCTIVE TESTING PERSONNEL QUALIFICATION ANDCERTIFICATION IN ACCORDANCE WITH MIL-STD-410 OR FM APPROVEDEQUIVALENT.

Place and Date issued: La Paz, 04/01/98

Certificate No.145C/98/04/004

Pag 4 of 7 .

REPUBLIC OF BOLIVIACIVIL AVIATION AUTHORI1l'

AIRWORTHINESS DEPARTMENT

Part: Maintenance

REPAIR STATION OPERATIONS SPECIFICATIONSLimitations:

The rating(s) for the Center of Maintenance with Certificate Number 145C798/04/004is/are limited to the following:

LIMITED RATINGS: (Cont)

SPECIALIZED SERVICES: (CONT)

HEAT TREATMENT

ALUMlNUM ALLOYS • MIL-H-6988ALLOY STEELS . MIL-H·6875 H.TITANIUM & TITANIUMALLOYS • MlL-H-81200 B.

SHOT PEENING: . METAL PARTS/CERAMICIBEAD PER.MIL.S·13165C,AMS2430L AS REVISED AND APPROVED BY THE FAA.

CHEMICAL TREATMENT ANODIZING OF ALUMINUM ALLOYS • PER MIL·A-8625F,AMS2468D. ORAMS2472C. CHROMATE TREATMENTOF ALUMINUMALLOYS PERMIL-C-5541 OR AMS2473E. CHROMATE TREATMENT OF MAGNESIUM ALLOYSPER MIL-M·3171C, BLACK maDE FINISH PER, MIL-C-13924C OR AMS2485H.PHOSPHATING PER DOD-P·16232 F, AS REVISED AND APPROVED BY THE FAA.

Place and date issued: La Paz, 04/01198

Certificate NO.145C/98/04J004

Pag Q•••••••of 7. ••.•••.

REPUBLIC OF BOLIVIACIVIL AVIATION AUTHORllY

AIRWORTHINESS DEPARTMENT

Part: Maintenance

REPAIR STATION OPERATIONS SPECIFICATIONSLimitations:

The rating(s) far the Center of Maintenance with Certificate Number 145C/98704/004is/are limited to the following:

LIMITED RATINGS: (Cont)

SPECIALIZED SERVICES: (CONT)

PLATING ALL SPECIFICATIONSIPROCESSES(AS REVISED AND FAA APPROVED)

CADMIUMCHROMIUMTHINIDENSE CHROMIUMNICKELELECTROLESSNICKELNICKEL - CADIUMSILVERCOOPERTIN

• QQ-P-416, AMS2400S.- AMS2406H, MIL·STD-1501C. 11-C-320C-AMS 2438- QQ-N-290A, AMS 2403J, AMS 2424D.- MIL-C-26074E. AMS 2404C.-AMS 2416H.- QQ-S-365D. AMS 2410H. AMS 2411D, AMS 241F.- MIL-C-14550B- MIL-T-I0727C, AMS 2408F.

PLASMA FLAME SPRAY COATINGS - PER AMS 2437 B. AS REVISED ANDAPPROVED BY THE FAA.

WELDING - TUNGSTEN INERT GAS (T.I.G.) PLASMA ARC AND ELECTRON BEAMIN ACCORDANCE WITH AMS2681A OR AMS 2685C, AS REVISED AND APPROVEDBYTHEFAA.

Place and date issued: La Paz. 04/01/98

Certificate No. 145C/98/04J004

Pag e of 7 .

REPUBLIC OF BOLIVIACIVIL AVIATION AUTHORITY

AIRWORTHINESS DEPARTMENT

Part: Maintenance

REPAIR STATION OPERATIONS SPECIFICATIONSLimitations:

The rating(s) for the Center of Maintenance with Certificate Number 145C/98/04/004is/are limited to the following;

LIMITED RATINGS: (Cont)

SPECIALIZED SERVICES: (CONT)

DIFFUSIQN COATING - PROCESSES TO BE ACCOMPLISHED INACCORDANCE wrTH THE CURRENT MANUFACTURE'S MANUAL,SPECIFICATION AND INSTRUCTIONS.

BRAZING - PER MIL·B-7883 B, AS REVISED AND APPROVED BY THE FAA.

FUSION WELDING - ALUMINUM ALLOYS, STEEL CORROSION AND HEATRESISTANT ALLOYS PER MIL-W-2219, AS REVISED AND APPROVED BYTHEFAA.

FULL AUTHORITY DIGITAL ELECTRONIC CONTROLS <FADEC) - EEC131-1AND EEC 150-20.

RSS·HS001 AND RSS·RS003 MULTI-LEADED SURFACE MOUNTED DEVICEREPLACEMENT WITR LEAD SPACES OF LESS TRAN .060 INCHES.

Place and date issued: La Paz, 04/01198

Tg]

REPUBLIC OF BOLIVIACIVIL AVIATION AUTHORITY

AIRWORTHINESS DEPARTMENT

Part: Maintenance

Certificate Na.145C/98104l004

Pag 7 af 7 .

REPAIR STATION OPERATIONS SPECIFICATIONS

Limitations:

The rating(s) for the Center of Maintenance with Certificate Number 145C/98/04/004is/are limited to the following:

LIMITED RATINGS: (Cont)

SPECIALIZED SERVICES: (CONT)

FADEC (CONT)

RSS-HS002 UVPROM REPROGRAMMING

RSS-HS004 EEPROM REPROGRAMMING

WORK ON FULL AUTHORITY DIGITAL ELECTRONIC CONTROL TO BEACCOMPLISHED IN ACCORDANCE WITH THE PARTICULAR AIRCARRIER'S FAA APPROVED MAINTENANCE PROGRAM AND THEMANUFACTURER'S CURRENT TECHNICAL DATA OR OTHER PROCEDURESACCEPTABLE TO THE CAA OF BOLIVlA.

(xly ­~~;!3

/ @mdti. (jaune r()iJ1antW.OIRECTOR GENERAL OE

AERONAUTICA CIVIL

Place and date issued: La Paz, 04/01198