Renov Instal at Ions System 2011 CPG

2
Rnsrin nd hisri rsrin rjs place special demands on the building team. Whether your design requires absolute adherence to historical authenticity or simply aims to respect the scale and design language of another era, Pella offers therds, insin syss nd hni ssisn that will help you achieve every detail of your design objectives. For an in-depth review of Pella Commercial installation systems and construction details for replacement and renovation, refer to pellaadm.com or contact your local Pella commercial representative . complete teaR-out of ext a a fRame  aiin: When complete tear-out is necessary for historical, aesthetic or structural considerations. • Custom-size units available. • Good for virtually any existing opening. eisingcnsrin d Replacemet of a ol — u fRame expaeR  aiin: When wood or metal windows are accessible from the exterior. • Economi cal method of window replacement. • Exi sting window frames are not removed. • Low-maintenanc e aluminum trim matches Pella® products. • Updat es exterior trim or covers existing trim that is in poor condition. Wirtz Building,Chicago,IL I — Installation Systems Utilicorp United World Headquarters Kansas City,M Waksman Institute of Microbiology Madison,J Replacemet of a ol — u pocket tallato  aiin: When the existing frames are in good condition and only the sash needs to be replaced. • Ful ly assembled Precision Fit ® double-hung, casement, awning and xed windows. • S lides easily into existing pocket. • Trim, wallcoverin gs, paint and plaster are usually not disturbed. Eliminates cost and inconv enience of a complete tear-out. Replacemet of a ol — u taaR ubfRame tem  aiin: When replacing wood windows. • Alu minum subframe is preassembled and installed into openings. • Concea ls existing wood window frame to become “receptor” for new window. Allows installation f rom insidebuilding. • R educes labor costs and eliminates need for exterior scaffolding and its expense. Replacemet of a ol — u t-ubfRame tem  aiin: When replacing metal windows. • Alu minum subframe is preassembled and installed into openings. • Concea ls existing metal window frame to become “receptor” for new window. Allows installation f rom insidebuilding. • R educes labor costs and eliminates need for exterior scaffolding and its expense. Pella’s sndrd sr nd t-sr syss for window replacement reduce labor costs of installation of new window sash with minimal disturbance to existing construction. hese systems allow installation of new units from inside the building, eliminating the need for exterior scaffolding and its expense. McGinnis School Perth mboy,J Hotel ndaluz lbuquer que,M d eising cnsrin fr endr brid eisingcnsrin d eising cnsrin r d eising cnsrin t-r d brid 3 

Transcript of Renov Instal at Ions System 2011 CPG

Page 1: Renov Instal at Ions System 2011 CPG

8/6/2019 Renov Instal at Ions System 2011 CPG

http://slidepdf.com/reader/full/renov-instal-at-ions-system-2011-cpg 1/2

Rnsrin nd hisri rsrin rjs place special demands

on the building team. Whether your design requires absolute adherence to

historical authenticity or simply aims to respect the scale and design language

of another era, Pella offers the rds, insin syss nd hni

ssisn that will help you achieve every detail of your design objectives.

For an in-depth review of Pella Commercial installation systems and

construction details for replacement and renovation, refer to pellaadm.com

or contact your local Pella commercial representative.

complete teaR-out of ext a a fRame

 aiin:When complete tear-out is necessary for historical, aesthetic or structural considerations.

• Custom-size units available.

• Good for virtually any existing opening.eising cnsrin

d

Replacemet of a ol — u fRame expaeR

 aiin:When wood or metal windows are accessible from the exterior.

• Economi cal method of 

window replacement.

• Exi sting window frames are

not removed.

• Low-maintenanc e aluminum

trim matches Pella® products.

• Updat es exterior trim or

covers existing trim that is in

poor condition.

Wirtz Building,Chicago,IL

I — Installation Systems

Utilicorp United World Headquarters

Kansas City,M

Waksman Institute of Microbiology

Madison,J

Replacemet of a ol — u pocket tallato

 aiin:When the existing frames are in good condition and only the sash needs to be replaced.

• Ful ly assembled Precision Fit® 

double-hung, casement, awning

and xed windows.

• S lides easily into existing pocket.

• Trim, wallcoverin gs, paint and

plaster are usually not disturbed.

• Eliminates cost and inconvenience

of a complete tear-out.

Replacemet of a ol — u taaR ubfRame tem

 aiin:When replacing wood windows.

• Alu minum subframe is

preassembled and installed

into openings.

• Concea ls existing wood

window frame to become

“receptor” for new window.

• Allows installation from

inside building.

• R educes labor costs and

eliminates need for exterior

scaffolding and its expense.

Replacemet of a ol — u t-ubfRame tem

 aiin:When replacing metal windows.

• Alu minum subframe is

preassembled and installed

into openings.

• Concea ls existing metal

window frame to become

“receptor” for new window.

• Allows installation from

inside building.

• R educes labor costs and

eliminates need for exterior

scaffolding and its expense.

Pella’s sndrd sr nd t-sr syss for window replacement reduce labor costs of installation of new

window sash with minimal disturbance to existing construction. hese systems allow installation of new units from

inside the building, eliminating the need for exterior scaffolding and its expense.

McGinnis School

Perth mboy,J

Hotel ndaluz

lbuquerque,M

d

eising cnsrin

fr

endr

brid

eising cnsrin

d

eising cnsrin

r

d

eising cnsrin

t-r

d

brid

Page 2: Renov Instal at Ions System 2011 CPG

8/6/2019 Renov Instal at Ions System 2011 CPG

http://slidepdf.com/reader/full/renov-instal-at-ions-system-2011-cpg 2/2

FM PS ISLLI SSMS

here are ny ins r insing Pella® Impervia® berglass

composite windows in new construction and renovation projects:

niing ns; ngs; rs wih ns, snry is r

 j srws, nd t-srs.

Continuous perimeter niing ns are used when construction

methods permit window and door units to be insd r h

rir prior to the application of exterior cladding — such as lap

siding, brick veneer or stucco.

msnry is, j srws r t-srsare used when

construction materials or sequence dictates that the window

units be insd r h inrir or after the wall system is

completely constructed.

For an in-depth review of Pella Commercial’s full range of 

installation systems and construction details for new construction

and renovation, refer to pellaadm.com.

ot all installation methods are available on all products. Check with your local Pella

commercial representative for details.

teRal f

flu flae

The integral fin design features a

continuous fin, allowing the window

frame to be integrated into the building’s

weather-resistant barrier using the Pella

Window and Door Installation Method.1

This total installation solution includes our

exclusive SmartFlash® installation tape

and Great Stuff ™ Pro Window & Door

Insulating Foam Sealant by The Dow

Chemical Company.2

The flush flange frame is designed specifically

for replacement applications on stucco

exteriors in arid climates like those found in

the southwestern part of the United States.

The flush flange allows for quick installation

without removing the existing frame or

damaging the stucco exterior.

he r provides a variety of attachment and installation options. Windows can be installed in wood/steel frame

openings using in ns, or in masonry openings using insin is or j srws. Block frames may also be

used in window replacement projects without removing the existing frame or damaging the exterior.

ngr fin

b fr

block fRame Wt offet f

block fRame Wt tallato clp

block fRame Wt cReW attacmet

For new construction or

window replacement where

normal fin/tape installation

cannot be accomplished

because of wall conditions

or construction sequence.

The continuous offset nailing fin is

designed for use in new construction

with thin exterior claddings like

stucco, thus allowing the window to

be located more to the interior. When

the offset is not required, a standard

profile fin is available (shown at the

left with dashed lines).

For new construction or window

replacement where wall conditions

or construction sequence requires

installation from inside the building.

Installation from exterior with integral fin.

1 his method is applicable for installation of Pella windows and doors only. Pella warranty does not recommend use with other manufacturers’ products.

2 Great Stuff ™ is a trademark of he ow Chemical Company (“ow”) or an affiliated company of ow.

fsh fng

block fRame Wt t-ubfRame

For window replacement

requiring installation from

inside the building, Pella’s

T-subframe system reduces

labor costs by eliminating

the need for exterior

scaffolding.

eising cnsrin