Regency Excalibur P90 Gas Fireplace · 14 Excalibur P90 shown with herringbone brick panels and...

14

Excalibur P90 shown with herringbone brick panels and double door inlay with integrated safety screen.

TIMELESS ARCH DESIGNThe gentle arched design of this product provides the perfect backdrop for the beautiful Regency fire. Glowing embers and realistic split logs are molded from real wood to create the appeal of an authentic looking wood burning fire.

P90EXCALIBUR® GAS FIREPLACE

SPECIFICATIONS (NATURAL GAS)*

Input (BTU) 35,000

Turn down to (BTU) 18,200

EnerGuide Rating (Canada only) 67.75%

Efficiency (steady state) 75%

DIMENSIONS

Viewing Area 455 sq.in.

Width 37"

Height 29-1/4"* For propane (LP) specs please see page 20.For detailed specifications please see pages 20-23.

• Natural gas• Ceramic glass• Log set with embers• Fire grate• Black brick panel floor• Blower• Proflame remote control• Flame height adjustment control• Limited lifetime warranty

• Arch surround in black with integrated safety screen• Brick panels in various colors and designs• Double door inlay• Accent kits in polished gold or polished nickel for double door inlay & arch surround• Wall thermostat• Propane conversion kit• Heat Wave™ power duct kit• Heat Release™ kit• AstroCap® venting system

STANDARD FEATURES OPTIONS

15

ELEGANT STYLE, CONTROLLABLE HEATCreating an elegant focal point with Regency Liberty® L965E one of the largest viewing areas available in the Regency line. The L965E permits finish materials to be installed to the edges for a pure, unadorned appearance. An adjustable burner system allows the flame to be controlled for mood and comfort from a roaring fire to a gentle glow all from the convenience of a hand-held remote control.

L965ELIBERTY® LARGE GAS FIREPLACE

SPECIFICATIONS (NATURAL GAS)*

Input (BTU) 48,000

Turn down to (BTU) 16,000

EnerGuide Rating (Canada only) 63%

Efficiency (steady state) 79%

DIMENSIONS

Viewing Area 965 sq.in.

Width 36-13/16"

Height 33-1/4"

Depth 24"

* For propane (LP) specs please see page 20.For detailed specifications please see pages 20-23.

Liberty L965E shown with castlestone brick panels and integrated safety screen.

• Natural gas• Safety screen• Ceramic glass• Log set with embers• Fire grate• Accent lights• Flame height adjustment control• Proflame remote control• Electronic ignition with SureFire™ switch• Two stage burner• Limited lifetime warranty

• Brick panels in a variety of colors and designs • Inner reflective panels in black enamel• Propane conversion kit• Vertical or horizontal vent terminations• Heat distribution kit• AstroCap® venting system

STANDARD FEATURES OPTIONS

ACCESSORIES - AT A GLANCE L965E B41XTCE B41XTE B36XTCE B36XTE P90 P36/P36D P36E P33CE P33E P33 P131 P121

Clean front Glass

Faceplates

Vignette

Black

Black Chrome

Platinum

Tuscan Sunset

Vignette Door Inlay

Black

Black Chrome

Tuscan Sunset

Vignette Finishing trim

Surrounds

Metal

Black

Stainless Steel

Sunset Bronze

GlassPure Black

Chocolate

Excalibur Arch Surrounds

Surround Black

Door Inlay Black

Classic look

Louvers Black

Flush panels Black

Finishing Trim Black

Inner panelsBricks

Standard - Rustic Brown

Standard - Old Town Red

Standard - Charcoal

Herringbone - Rustic Brown

Castlestone

Ledgestone

Reflective Black enamel

Safety Screen*

Ember upgrade package

Blower (with fan speed controller)

Blower (1-speed wall switch)

Controls

Programmable Thermostat

Proflame GTMF Remote Control

Proflame GTMFS Remote Control

Electronic ignition with Surefire™ switch

Venting

Direct vent

AstroCap® Venting System

Heat Wave™ Power Duct System

Heat Release™ Kit

Heat Distribution kit

Propane conversion kit

Not available Standard Optional* Safety screen is included with unit or faceplate

18

OPTIONS

19

r

Direct Vent

ConvectiveAi

Intake

RadiantHeat

ConvectiveHeat

OutsideCombustion

Air

OutsideCombustion

Air

OutsideExhaust

Outsidewall

Blower(optional)

Direct Vent Technology allows you to add a fireplace to rooms with no existing chimney. Simply vent your fireplace through an outside wall and finish it with the patented Regency AstroCap Flex Venting System. Maintain your indoor air quality by drawing fresh combustion air from outside through the venting system in to a sealed firebox. The exhaust is returned outdoors without affecting your indoor air. Direct Vent Technology is crucial in maintaining both high efficiency and indoor air quality.

Regency Fireplaces delivers controllable heating solutions by combining the latest in radiant/convection heat technology and innovative features.

Direct Vent

Zone Heating with Regency: By adding a fireplace to your most frequently used living space you’re not wasting energy by heating rooms you don’t use.

Heat Adjacent Rooms with the Heat Wave™ - Power Duct System: Cut down on your heating costs using a Heat Wave kit. The Heat Wave system attaches onto most Regency gas fireplaces allowing you to direct heat into rooms up to 20 feet away. This kit comes complete with vent, variable speed blower (for HeatWave system only) and vent register.

; Adjustable flame/heat control

; Heat radiating ceramic glass

; SureFire Electronic Ignition switch with battery backup features a fuel saving intermittent pilot ignition conserving energy when not in use.

; Power’s Out, Heat’s On. All Regency gas fireplaces operate without electricity. Enjoy peace of mind all winter long.

; Variable speed blower to maximize efficiency. Our quiet blowers increase the efficiency of your fireplace by pushing the heat produced by your fireplace forward and distributing it further and evenly into the room.

; Proflame GTMF Remote Control. A standard feature included with all Traditional Gas Fireplaces, this user friendly programmable remote can be set to start your Regency fire at your desired room temperature and be easily adjusted with the touch of a button.

FEATURE DESCRIPTION PROFLAME GTMF PROGRAMMABLE THERMOSTAT

On/Off

Child lock

LCD Backlit Screen

Clock

Temperature display ⁰F / ⁰C

Themostatone setting (very day)

5-day day weekday & 2-day weekend

Smart thermostat*

Flame adjustment (6 levels)

Fan control** (6 levels)

Accent light (On/Off)***

Proflame GTMF Remote Control(Standard)

Programmable Thermostat(Optional)

* Smart Thermostat - Rather than a thermostat that simply turns your fireplace on and off, the Smart Control function allows you to set your desired room temperature. As the room reaches your personal setting the flame intensity and heat will gradually decrease – keeping the ambience of your Regency fire on with less heat output with the option to turn off at any time.

** For models that have a blower.*** For models that have an optional accent light.

REMOTES & THERMOSTATSMAXIMIZING COMFORT AND EFFICIENCY

NO CHIMNEY? NO PROBLEM!

SPREAD THE WARMTH

FLOOR REGISTER

CEILING REGISTER

WALL REGISTERFIREPLACE

VENTING

Optional Heat Distribution Kit

L

KJ K

F G

H

IH1J1 K1

L

KJ K

F G

H

IH1J1 K1

8" Dia. Outer 5" Dia. InnerA

B

C

EF

G

HH1

D

8" Dia. Outer 5" Dia. InnerA

B

C

EF

G

HH1

D

A

B1B2

D

E

F

C

A

B1B2

D

E

F

C

L

KJ K

F G

H

IH1J1 K1

20

SPECIFICATIONS

SPECIFICATIONSINPUT (BTU) TURN DOWN TO

(BTU)ENERGUIDE RATING (CANADA ONLY)

EFFICIENCY(STEADY STATE)

NG LP NG LP NG LP NG LP

Liberty L965E 48,000 48,000 16,000 17,000 63.11% 63.46% 79% 79%Bellavista B41XTCE 42,500 37,500 30,000 29,500 68.59% 68.97% 73% 73%

B41XTE 42,500 37,500 30,000 29,500 68.59% 68.97% 73% 73%

B36XTE 31,000 31,000 21,500 25,000 66.47% 65.59% 71% 71%

B36XTCE 31,000 31,000 21,500 25,000 66.50% 66.59% 71% 71%Panorama P131 40,000 39,000 20,500 20,600 60.66% 62.51% 75% 75%

P121 40,000 39,000 20,500 20,600 60.66% 62.51% 75% 75%

P36D 30,000 30,000 15,500 15,000 64.62% 64.62% 82% 82%

P36 30,000 30,000 15,500 15,000 62.70% 62.70% 82% 82%

P36E 29,500 28,500 19,500 22,000 67.45% 68.40% 82% 82%

P33 20,000 18,000 14,000 14,500 65.50% 68.24% 76% 77%

P33E 20,000 19,500 14,000 15,500 67.41% 70.61% 76% 77%

P33CE 20,000 19,500 14,000 15,500 67.41% 70.61% 76% 77%Excalibur P90 35,000 35,000 18,200 17,950 67.75% 67.75% 75% 75%

P131 / P121 FRONT

P131 BACK / P121 SIDE

P131 SIDE

EXCALIBUR P90 LIBERTY L965E

DIMENSIONS P90

A 31"

B1 35-1/8"

B2 42"

C 38"

D* 22-1/2"

E 45"

F 18-3/4"

DIMENSIONS L965E

A 5-1/4"

B 18-3/4"

C 36-13/16"

D 44-5/8"

E 43"

F 33-1/4

G 52-5/16"

H 39-11/16"

H1 41-3/16"

DIMENSIONS P131 P121

F 44-1/2" 46-1/4"

G 3" 4-3/4"

H 36" 36"

H1 20" 20"

I 42" 42"

J 41-1/2" 43-1/2"

J1 32-5/8" 32-5/8"

K 25" 25"

K1 17-3/4" --

L 12-1/2" 12-1/2"

* Without faceplate

Note: For P121 there is a 2-3/4” vent heat shield on the vent end of the fireplace. Please allow appropriate space for center positioning.

All products tested to the following standards: GRAVITY DIRECT VENT WALL FURNACE TESTED AND APPROVED FOR U.S.A AND CANADA TO: CAN/CGA-2.17-M91, (ANSI Z21.88b-1999/CSA 2.33b-M99).NOTE: All product specifications are subject to change without notice. Before installing refer to the relevant product manual for full and up to date information.

For installation, framing and clearances see manuals on our website: www.regency-fire.com

FRAMING & INSTALLATION

All other framing may be of combustible materials, i.e. 2 x 4, 2 x 6

All other framing may be of combustible materials, i.e. 2 x 4, 2 x 6

Vignette Framing Dimensions

A B C D36-1/4" 40-3/4" 12-3/4" 46"*

921mm 1036mm 324mm 1168mm*

* 'D' is Minimum height to combustible materials including the Minimum 2" (51mm) Top clearance to the Horizontal Vent.

Vignette + Finishing Trim - Flush FinishFraming Dimensions

A B C D38" 41-5/8" 14-3/4" 46"*

965mm 1057mm 375mm 1168mm*


Safety Screen + LouversFraming Dimensions

A B C D36-1/4" 36-1/4" 12-3/4" 46"*

921mm 921mm 324mm 1168mm*


B

Steel/wood stud on edge

Includingstandoffs

*Minimum height to combustible material

A

CD

EF

GH

I J

FRAMING WITHVIGNETTE FACEPLATE/VIGNETTEFINISHING TRIM, STEPPED FINISH

FRAMING WITH VIGNETTE FACEPLATE & FINISHING TRIM FINISHED FLUSH

FRAMING WITH LOUVERS AND SAFETY SCREEN

22

P36/P36E/P36D

P33/P33E P121 - SEE THRU

P131 - PIER

P90

INSTALLATION UNITS A B C D* E F G H I J

Framing with Vignette Faceplate

P36/P36E 36-1/4" 40-3/4" 12-3/4" 46" 42-7/16" 33-1/4" 36-1/4" 60" 7-1/4" 12-3/4"

P36D 36-1/4" 40-3/4" 17-3/8" 46" 48" 33-1/4" 36-1/4" 68" 11-1/4" 17-1/8"

Framing with Vignette Faceplate & Finishing Trim Finished Flush

P36/P36E 38" 41-5/8" 14-3/4" 46" 43-11/16" 33-1/4" 38" 61-13/16" 9-1/4" 14-3/4"

P36D 38" 41-5/8" 19-3/8" 46" 50-9/16" 33-1/4" 38" 71-9/16" 13-1/4" -

Framing with Louvers and safety screen

P36/P36E 36-1/4" 36-1/4" 12-3/4" 46" 42-7/16" 33-1/4" 36-1/4" 60" 7-1/4" 12-3/4"

P36D 36-1/4" 37-1/4" 17-3/8" 46" 48" 33-1/4" 36-1/4" 68" 11-1/4" 17-1/8"

INSTALLATION UNIT A B C D E F G H I J

Framing and Finishing P90 46-1/2" 45-1/4" 46-3/8"* 21-1/2" 53-3/4" 51-1/8" 31" 46-1/2" 72-1/4" 13-11/16" 19-1/4"

* If raised 1-1/8" using base standoffs

NOTE: The applicance extends 2-3/4" further on the vent side. If trying to center the appliance in a room add 2-3/4" to the non vent side when framing. Do not however change dimension (C) as the opening remains the same.

*Minus 2X the finishing material thickness.Finish Material thickness includes: drywall, ceramic tile, slate, etc.

*Minus 1X the finishing material thickness.Finish Material thickness includes: drywall, ceramic tile, slate, etc.

* ‘D’ is minimum height to combustible materials including the minimum 2" top clearance to the horizontal vent.

FOR BOTH RIGID & FLEX - VIGNETTE AND VIGNETTEFINISHING TRIM OR SAFETY SCREEN AND LOUVERS

VERTICAL TERMINATION OR VERTICAL RISE WITH HORIZONTAL TERMINATION

For Both Rigid & Flex

For Rigid Vent

Vignette and Vignette Finishing Trim or Safety Screen and Louvers

Vignette and Vignette Finishing Trim - Finished Flush

REAR TERMINATION

REAR TERMINATION

FOR RIGID VENT

FOR FLEX VENT

FOR BOTH RIGID & FLEX


-

***

***

Wood stud on edge

Wood stud on edge

33-1/4"

52-3/4"

37-1/4"1/4"

19-1/2" min.

31-3/4"Wood stud on edge

34-9/16”(878mm)FOR FLEX VENT

***Wood stud

on edge

(878mm)34-9/16”

***Wood stud

on edge




34-9/16"

21-1/4" min.


REAR TERMINATION

For Rigid Vent

For Flex Vent



34-9/16"

18-1/4" min.

34-3/4"36"

Wood stud on edge

34-9/16"

14-1/2" min.



37-1/2"

12-3/4"

23"

33-1/4"53-1/4"52-3/4"

37-1/4"1/4"

REAR TERMINATION

For Rigid Vent

For Flex Vent


33-1/4"

16-1/2" min.

31-3/4"36"

Wood stud on edge

33-1/4"

12-3/4" min.


FOR BOTH RIGID & FLEX - VIGNETTE AND VIGNETTEFINISHING TRIM OR SAFETY SCREEN AND LOUVERS



For Rigid Vent



REAR TERMINATION

REAR TERMINATION

FOR RIGID VENT

FOR FLEX VENT



-

***

***

Wood stud on edge

Wood stud on edge

33-1/4"

52-3/4"

37-1/4"1/4"

19-1/2" min.


34-9/16”(878mm)FOR FLEX VENT

***Wood stud

on edge

(878mm)34-9/16”

***Wood stud

on edge




34-9/16"

21-1/4" min.


REAR TERMINATION

For Rigid Vent

For Flex Vent



34-9/16"

18-1/4" min.

34-3/4"36"

Wood stud on edge

34-9/16"

14-1/2" min.



37-1/2"

12-3/4"

23"

33-1/4"53-1/4"52-3/4"

37-1/4"1/4"

REAR TERMINATION

For Rigid Vent

For Flex Vent


33-1/4"

16-1/2" min.

31-3/4"36"

Wood stud on edge

33-1/4"

12-3/4" min.


DIMENSIONS P121

A* 25"

B 42-1/2"

C 46-3/4"

DIMENSIONS P121

A* 25"

B 42-1/2"

C 45"

Note: These units are non-load bearing.

Framing Dimensions P121-10 (See Thru) P131-10 (Pier)A 25"(635mm) material thickness*

A 25"(635mm) material thickness*

B 42-1/2"(1080mm) B 42-1/2"(1080mm)

C 46-3/4"(1187mm) C 45" (1143mm) material thickness*

* Finish material thickness includes: drywall, ceramic tile, slate, etc.

P121 only: The appliance extends 2-3/4" inches further on the vent side. If trying to center the appliance in a room add 2-3/4" to the non vent side when framing. Do not however change dimension (C) as the opening remains the same.

Note: These units are non-load bearing.

Framing Dimensions P121-10 (See Thru) P131-10 (Pier)A 25"(635mm) material thickness*

A 25"(635mm) material thickness*

B 42-1/2"(1080mm) B 42-1/2"(1080mm)

C 46-3/4"(1187mm) C 45" (1143mm) material thickness*

* Finish material thickness includes: drywall, ceramic tile, slate, etc.

P121 only: The appliance extends 2-3/4" inches further on the vent side. If trying to center the appliance in a room add 2-3/4" to the non vent side when framing. Do not however change dimension (C) as the opening remains the same.

All products tested to the following standards: GRAVITY DIRECT VENT WALL FURNACE TESTED AND APPROVED FOR U.S.A AND CANADA TO: CAN/CGA-2.17-M91, (ANSI Z21.88b-1999/CSA 2.33b-M99).NOTE: All product specifications are subject to change without notice. Before installing refer to the relevant product manual for full and up to date information.

For installation, framing and clearances see manuals on our website: www.regency-fire.com

Regency Excalibur P90 Gas Fireplace · 14 Excalibur P90 shown with herringbone brick panels and...

Documents

Transcript of Regency Excalibur P90 Gas Fireplace · 14 Excalibur P90 shown with herringbone brick panels and...