Process Plants

Cleansing at

Refineries

Actions to increase pressure and temperature in process plants eliminating toxicity and

explosion limits in 1 day.

WWW.OILGETERS.COM

Contents

Value Proposition: Fog Cleansing System

Competitive advantages

Benefits and applications

Fog Cleansing System characteristics

Implementation process

Success stories

About Oil Getters

Request a proposal

WWW.OILGETERS.COM

Value proposition: Fog Cleansing System

Our Fog Cleansing System is 100% inert.

Therefore it does not provoke chemical reactions or corrosion.

It is environment friendly and applicable to any type of production

and process equipment, minimizing operation risks.

At Oil Getters we help refineries to increase pressure and temperature in heat exchangers, tanks and pipeline through our

patented Fog Cleansing System in which we eliminate solid hydrocarbons waste, toxicity and the explosion limits in 1 day.

Our Fog Cleansing System is a reaction that results of the combination of hydrogen peroxide with a series of agents that

yields a high temperature fog that ranges from 176 °F to 392 °F.

WWW.OILGETERS.COM

3 Competitive advantages at implementation

Implementation time period:

1 day

Vs.

7 to 10 days as it is done today!

Our cleansing process includes

a mechanical integrity analysis

to detect leaks and cracks in

tanks, pipeline, heat

exchangers, welds and unions.

Our cleansing process reduces maintenance and repair costs

since we do not open the equipment to wash it chemically

or mechanically.

We only inject our superheated fog eliminating solid waste from hydrocarbons accumulated in the walls, unions and cavities

inside the equipment.

Main benefit: increase in pressure and temperature in 1 day!

WWW.OILGETERS.COM

Benefits and applications

Pressure and temperature increase in 1 day.

Reduction in the process plants shutdown period. No other process is required afterwards (mechanical or chemical).

100% elimination of toxicity and explosion limits, eliminating hydrogen sulfide, iron sulfide, inorganic muds, paraffins,

asphaltenes and other hydrocarbons solid waste.

Our technology can be applied to any type of equipment, process plants, tanks, pipeline and materials.

It’s not toxic and it does not generate hazardous waste.

It is not a corrosive agent and it’s environment friendly.

When we implement our Fog Cleansing System in your process plants, we will observe the following benefits:

Guaranteed results!

WWW.OILGETERS.COM

Fog Cleansing System Characteristics

Our Fog Stimulation Treatment is 100% clean technology because it does not generate any greenhouse gas, fossil fuels

or polluting waste, not even water. Let’s review the following comparison chart:

Characteristics Fog Stimulation Treatment

Water Use No / Use of hydrogen peroxide in minimum amounts.

Fossil Fuel Use No

Chemical Use Yes, the chemical used is environmentally friendly.

Mobility The entire system weighs less than a ton.

Fog Quality Superheated / Our fog doesn’t lose its properties when

temperature goes below 90 °C / 194° F

Operation time 1 to 4 hours maximum.

Production Increase From 30% to 100% regarding production starting point.

WWW.OILGETERS.COM

Mechanical integrity and assessment of the equipment to be

cleanses

Tailored design of the equipment cleansing intervention program

Implementation of the tailored Fog

Cleansing System

Every equipment has different characteristics: size, pressure, temperature, mechanical conditions and so on. Therefore, we need to perform a thorough assessment to then design a tailored cleansing treatment for each equipment going through the following stages:

Process Plants

Cleansing =

elimination of toxicity

and explosion limits +

increase in pressure

and temperature.

Productivity

improvement

Guaranteed!At this stage we evaluate

the operating conditions of

heat exchangers, tanks,

pipeline and other facilities.

Once the assessment is

complete, we create a tailored

cleansing program, including the

temperature, pressure and

amount of fog to apply.

At this stage we apply the

tailored cleansing program

making sure that we eliminate

all solid waste of

hydrocarbons.

Fog Cleansing System: Implementation process

WWW.OILGETERS.COM

Characteristics of the pipeline

Rig Mechanical pumping

Depth 3967 m / 13,015 ft

Packer 2003 m / 6571 ft

Assessment High friction efforts and bad filling superficial pump

Production 139 BPD

Cleansing results

Setup 3 hrs

Operation 35 min, V=52.5 m3 /14,661 gal, P=150 psi, T=120°C / 248°F

RigWax return was observed with production fluids in metal dam, reducing

efforts on the UBM load

Production 175 BPD = 26% increase

RecommendationsTaking information and measuring torque letter to quantify results,

optimize BM

General Results Successful

Success story: Santuario 35T

WWW.OILGETERS.COM

18/11/2014139.00

29/12/2014175.00179

0.00

50.00

100.00

150.00

200.00

250.00

300.00

BPD PROMEDIO BPD

Production benefits

Success story: Santuario 35T

WWW.OILGETERS.COM

Characteristics

Three-Phase

Separator1000 BPD, 1 MMPCSD

Cleansing

ProcessThe equipment was cleansed in a 2 stage process

Intervention time 15 min per stage

ResultsComplete cleanse: no solid waste, no hydrocarbons

or gas presence (measured with a 4 sensor gauge)

CommentsCleansing was performed in a total of 2 hours without

the need of an internal intervention in the separator.

Success story: Horizontal three-phase separator

WWW.OILGETERS.COM

Characteristics

Collecting head

1 production head of 8”

1 measurement head of 4”

4 Entry lines of 2”

Cleansing process

The collecting head was divided in section and the

cleansing was performed on the head sweeping the

entry lines with our superheated fog

Intervention time 4 hours

ResultsComplete cleanse: no solid waste, no hydrocarbons or

gas presence (measured with a 4 sensor gauge)

Comments

Reduction of 5 kg/cm2 = 71 PSI of counter pressure in

the system. 528 gal. of paraffins and sand were

removed from the collecting head

Success story: Production collecting head

WWW.OILGETERS.COM

Characteristics

Frack tank Closed 500 BLS, container of hydrocarbons waste

Cleanse processThe equipment was cleansed with our superheated

fog system

Intervention time 20 min

ResultsComplete cleanse: no solid waste, no hydrocarbons

or gas presence (measured with a 4 sensor gauge)

Comments Cleansing was performed with an open tank

Success story: Frack tank

WWW.OILGETERS.COM

Characteristics

PVUSize 30,000 lts / 7925 gal, hydrocarbons transportation

use

Cleanse process The equipment was cleansed in a 2 stage process

Intervention time 20 min per stage

ResultsComplete cleanse: no solid waste, no hydrocarbons or

gas presence (measured with a 4 sensor gauge)

CommentsThe cleansing process was fragmented in 2 stages to

guarantee its results

Success story: Pressure and vacuum unit

WWW.OILGETERS.COM

We are on a mission to help upstream and downstream companies to increase their

oil barrels productivity by offering our state of the art equipment and solution that will

yield at least a 30% increase in less than 1 day.

We have already delivered outstanding results in the USA and in MEXICO with

upstream and downstream operations.

About Oil Getters

Our Oil and Gas Business Units:

Oil Wells Stimulation Treatment

Refineries plants cleanse services: tanks, heat exchangers, pipeline and valve cleansing services in 1 day

Non-Destructive Testing: Magnetic Particle (MT), Liquid Penetrant (PT), Radiographic (RT), Ultrasonic (UT), Electromagnetic

(ET), Visual (VT), Acoustic Emission (AE), Guided Wave (GW), Laser Testing Methods (LM), Leak Testing (LT), Magnetic Flux

Leakage (MFL), Thermal / Infrared Testing (IR), Vibration Analysis (VA)

Pipeline repairs and wrapping

Bio-remediation for oil spills

Fracking minerals: silica sand, barite, bentonite and hydrochloric acid

Our certificationsCurrently working with upstream and

downstream operations PEMEX.

WWW.OILGETERS.COM

Request a tailored proposal

By now, you already know that:

1. When you work with Oil Getters, you will be able to increase your pressure and temperature in your process plants in 1day.

2. You can count on our know how, our technology, our team, our experience to guarantee our results.

3. We have to deliver on our promise or we don’t get paid!

So, what are you waiting for?

Request your tailored proposal today at

http://www.ibedconsulting.com/request-a-proposal.html

Once you send us your information, we will contact you at our earliest convenience to schedule a conference call so

that we fully understand your needs and expectations. We will then send you a questionnaire to gather specific

information so that our Oil Engineering Team designs the right treatment for your process plants.

May you succeed with your Refinery!

For more information we invite you to visit our website:

http://www.OilGetters.com/

Send us an email to: proposals@ibedconsulting.com

Or call us at our Phone number: +1 832 305 9234