RAPIER TECHNOLOGIES LTD MADE IN UK. Heavy duty pan and tilt head future proof design with multiple...

16
RAPIER TECHNOLOGIES LTD MADE IN UK

Transcript of RAPIER TECHNOLOGIES LTD MADE IN UK. Heavy duty pan and tilt head future proof design with multiple...

Page 1: RAPIER TECHNOLOGIES LTD MADE IN UK. Heavy duty pan and tilt head future proof design with multiple options. Heavy duty pan and tilt head future proof.

RAPIER TECHNOLOGIES LTD

MADE IN UK

Page 2: RAPIER TECHNOLOGIES LTD MADE IN UK. Heavy duty pan and tilt head future proof design with multiple options. Heavy duty pan and tilt head future proof.

• Heavy duty pan and tilt head future Heavy duty pan and tilt head future proof design with multiple options.proof design with multiple options.

• Machined from solid.Machined from solid.

• Waterproof sealing.Waterproof sealing.

• Toothed belt drives.Toothed belt drives.

• High resolution (6mins of arc).High resolution (6mins of arc).

• Standard mounting.Standard mounting.

• Highly experienced design and Highly experienced design and manufacturing team.manufacturing team.

Heavy Duty Pan & Tilt Head.Heavy Duty Pan & Tilt Head.

RAPIER TECHNOLOGIES LTD

MADE IN UK

Page 3: RAPIER TECHNOLOGIES LTD MADE IN UK. Heavy duty pan and tilt head future proof design with multiple options. Heavy duty pan and tilt head future proof.

Heavy Duty Pan & Tilt Head.Heavy Duty Pan & Tilt Head.• Unit can carry a single Unit can carry a single

side pod, dual side side pod, dual side pods, one either side pods, one either side or Quad side pods, or Quad side pods, two each side. two each side.

• Pods can be of varying Pods can be of varying sizes dependant on sizes dependant on internal equipment internal equipment integration.integration.

• Camera pre-set Camera pre-set accuracy 6 mins of accuracy 6 mins of arc.arc.

RAPIER TECHNOLOGIES LTD

MADE IN UK

Page 4: RAPIER TECHNOLOGIES LTD MADE IN UK. Heavy duty pan and tilt head future proof design with multiple options. Heavy duty pan and tilt head future proof.

Heavy Duty Pan & Tilt Head.Heavy Duty Pan & Tilt Head.

• All components are All components are machined. No machined. No castings used.castings used.

• Aluminium parts are Aluminium parts are made from 6082, made from 6082, hard anodised or hard anodised or alocrom and painted.alocrom and painted.

• High Grade Stainless High Grade Stainless steel parts.steel parts.

• Camera is fully IP68.Camera is fully IP68.

RAPIER TECHNOLOGIES LTD

MADE IN UK

Page 5: RAPIER TECHNOLOGIES LTD MADE IN UK. Heavy duty pan and tilt head future proof design with multiple options. Heavy duty pan and tilt head future proof.

Waterproof Sealing.Waterproof Sealing.

• O-ring seals used O-ring seals used between all joining between all joining surfaces.surfaces.

• Double silicon rubber Double silicon rubber lip seals used for all lip seals used for all rotating joints.rotating joints.

RAPIER TECHNOLOGIES LTD

MADE IN UK

Page 6: RAPIER TECHNOLOGIES LTD MADE IN UK. Heavy duty pan and tilt head future proof design with multiple options. Heavy duty pan and tilt head future proof.

Toothed Belt Driven.Toothed Belt Driven.

• Belt drive to Belt drive to Pan and Tilt Pan and Tilt axis, no axis, no backlash giving backlash giving smooth smooth operation.operation.

RAPIER TECHNOLOGIES LTD

MADE IN UK

Page 7: RAPIER TECHNOLOGIES LTD MADE IN UK. Heavy duty pan and tilt head future proof design with multiple options. Heavy duty pan and tilt head future proof.

High Resolution.High Resolution.

• High resolution High resolution absolute position absolute position resolvers used to resolvers used to measure the measure the unit’s position.unit’s position.

RAPIER TECHNOLOGIES LTD

MADE IN UK

Page 8: RAPIER TECHNOLOGIES LTD MADE IN UK. Heavy duty pan and tilt head future proof design with multiple options. Heavy duty pan and tilt head future proof.

Standard Mounting.Standard Mounting.

• Standard 4” PCB Standard 4” PCB mounting base.mounting base.

• Plastic Bayonet Plastic Bayonet connector, no connector, no corroding parts.corroding parts.

• 31 way connector 31 way connector allowing allowing simultaneous dual simultaneous dual Video output. Video output.

RAPIER TECHNOLOGIES LTD

MADE IN UK

Page 9: RAPIER TECHNOLOGIES LTD MADE IN UK. Heavy duty pan and tilt head future proof design with multiple options. Heavy duty pan and tilt head future proof.

External Upgrade.External Upgrade.• Supports software Supports software

upgrades whilst upgrades whilst installed.installed.

RAPIER TECHNOLOGIES LTD

MADE IN UK

Page 10: RAPIER TECHNOLOGIES LTD MADE IN UK. Heavy duty pan and tilt head future proof design with multiple options. Heavy duty pan and tilt head future proof.

Electrical Interface.Electrical Interface.

• Telemetry present Telemetry present and correct and correct monitor in Power monitor in Power pack.pack.

• Dual voltage input Dual voltage input as standard.as standard.

RAPIER TECHNOLOGIES LTD

MADE IN UK

Page 11: RAPIER TECHNOLOGIES LTD MADE IN UK. Heavy duty pan and tilt head future proof design with multiple options. Heavy duty pan and tilt head future proof.

Protection.Protection.

• Static and limited Static and limited lightning protection lightning protection built into Power built into Power pack.pack.

• Easy User connection Easy User connection terminals in the terminals in the Power Pack.Power Pack.

RAPIER TECHNOLOGIES LTD

MADE IN UK

Page 12: RAPIER TECHNOLOGIES LTD MADE IN UK. Heavy duty pan and tilt head future proof design with multiple options. Heavy duty pan and tilt head future proof.

Side Pods.Side Pods.

• Pods can be Pods can be machined to machined to various sizes so various sizes so user sensors can user sensors can be easily fitted.be easily fitted.

RAPIER TECHNOLOGIES LTD

MADE IN UK

Page 13: RAPIER TECHNOLOGIES LTD MADE IN UK. Heavy duty pan and tilt head future proof design with multiple options. Heavy duty pan and tilt head future proof.

Insulation.Insulation.

• Internal Internal cables within cables within the unit are the unit are all PTFE all PTFE insulation.insulation.

RAPIER TECHNOLOGIES LTD

MADE IN UK

Page 14: RAPIER TECHNOLOGIES LTD MADE IN UK. Heavy duty pan and tilt head future proof design with multiple options. Heavy duty pan and tilt head future proof.

O. S. D.O. S. D.

• On Screen On Screen Display for all Display for all camera camera parameters parameters and set up.and set up.

RAPIER TECHNOLOGIES LTD

MADE IN UK

Page 15: RAPIER TECHNOLOGIES LTD MADE IN UK. Heavy duty pan and tilt head future proof design with multiple options. Heavy duty pan and tilt head future proof.

Wiper and Optional Wash.Wiper and Optional Wash.• Front glass Front glass

protrudes front face protrudes front face by 1mm, wiper arm by 1mm, wiper arm and silicon rubber and silicon rubber blade are a non blade are a non suspended design suspended design giving very long life.giving very long life.

• Lens screen washer Lens screen washer drive available as drive available as standard.standard.

RAPIER TECHNOLOGIES LTD

MADE IN UK

Page 16: RAPIER TECHNOLOGIES LTD MADE IN UK. Heavy duty pan and tilt head future proof design with multiple options. Heavy duty pan and tilt head future proof.

Power Saving.Power Saving.

• Software time out Software time out to stop wiper to stop wiper running when running when camera is no camera is no longer being longer being controlled.controlled.

RAPIER TECHNOLOGIES LTD

MADE IN UK