Quiksteel Fsl Epoxy Putty

8/11/2019 Quiksteel Fsl Epoxy Putty

1/4


2/4

STANVAC CHEMICALS (INDIA) LTD.Admin. Office: 15-16, Old Sewa Nagar Market , P.O. Lodhi Road, New Delhi-110 003. India

Tel: +91-11-24647199/ 24647252 Fax: + 91-11-24633847/ 24623826 E-mail: [email protected]

9. Temperature resistant up to 500F

10. Unmatched mechanical properties & surfaces adhesive vis--vis other fast curingepoxies

11. Superior chemical resistance

FAST DRYING:Quiksteel- FSL epoxy putty sets up in 5minutes, is hard like steel in 15 minutes, and iscompletely cured and ready to drill, sand, tap, prime, andpaint in one hour.

STRONG:SHEAR STRENGTH- QUIKSTEEL- FSL Epoxy putty hasshear strength of 680 pounds per square inch forcomparison; pine lumber has shear strength of 400pounds per square inch. Quiksteel- FSL epoxy putty ismore 'than one and one-half times as strong as pine.

TENSILE STRENGTH - QUIKSTEEL- FSL Epoxy puttyhas a tensile strength of 5,700 pounds per square inch.This would mean that a piece at Quiksteel one-inch indiameter could lift the weight of two compact automobiles.

HARD: QUIKSTEEL- FSL Epoxy putty is one of thehardest materials next to steel. Technically, it is rated at D-84. "D" is the highest hardnessrating in the shore rating system.

Quiksteel- FSL epoxy putty can be compared to ABS plastic (material used to manufactureautomobiles) or the fiber epoxy wings on the B2 bomber.When cured, QUIKSTEEL- FSL epoxy putty can be machined, milled, or turned on a lathe. Itcan also be drilled, tapped, sanded, sawed, routed, primed and painted. Anything you can doto metal or wood - you can do to QUIKSTEEL- FSL epoxy putty.

SEALS LEAKS UNDER WATER OR IN FLUIDS: QUIKSTEEL- FSL epoxy putty cures under

water and in all atmospheric conditions. Leaks can be sealed inside a container, tank, etc withliquids still in the item to be sealed.

SEALS LEAKS WHILE LEAK IS OCCURRING: if a gasoline or diesel-tank, oil pan, or anycontainer has a rupture, Quiksteel will seal the leak while the drainage is occurring. No needto empty container prior to repair.

CHARACTERISTICS


3/4

STANVAC CHEMICALS (INDIA) LTD.Admin. Office: 15-16, Old Sewa Nagar Market , P.O. Lodhi Road, New Delhi-110 003. India

Tel: +91-11-24647199/ 24647252 Fax: + 91-11-24633847/ 24623826 E-mail: [email protected]

IMPERVIOUS TO CHEMICALS: QUIKSTEEL- FSL epoxy putty is impervious to most

chemicals including battery acids.

STEEL REINFORCED:QUIKSTEEL EPOXY putty has the maximum holding power becauseit is steel reinforced and manufactured using the highest grades of epoxy. A repair byQuiksteel epoxy putty is almost as strong as steel.WITHSTANDS TEMPERATURES OF 500F (260C) OR MORE:QUIKSTEEL- FSL epoxyputty maintains its qualities when exposed to a continuous temperature of 500F (260C) and550F (288C) intermittently.

RESISTANT TO VARIABLE HARMONIC VIBRATIONS: QUIKSTEEL- FSL is uniquelycapable of withstanding variable harmonic vibrations caused by oscillating (AC) current.Repairs made to AC electrical equipment (rectifiers, power transformers, motors,insulators.) with QUIKSTEEL- FSL will therefore prove highly durable & effective.

1. Density (ASTM D792) 1.89 gm/cm3

2. Compression strength (ASTM D 695) 17.6 (103 psi)

3. Tensile strength (ASTM D 638) 5950 psi

4. Shear strength (ASTM D 905) 710 psi

5. Modulus of elasticity (ASTM D 638) 5.8 (105psi)

6. IZOD impact strength (ASTM D 256) 0.250 (ft Lb/ in)

7. Shore 'D' hardness (ASTM D 2240) 85

8. Temperature resistance Continuous : -90F To 500F

Intermittent : Up to 550F

9. Chemical resistance Impervious to most chemical, fuels,oils, acids, alkalis, solvents, batteryacid... Will adhere & bond on wetsurfaces, under water & withinchemicals.

10. Electrical properties

a) Volume resistivity 5 X 1015ohms/ cm

b) Dielectric strength 400 volts/ M @ 0.125M

TECHNICAL SPECIFICATIONS


4/4

Quiksteel Fsl Epoxy Putty

Documents

Transcript of Quiksteel Fsl Epoxy Putty