3M™ Armorcast Sheath Repair and Structural Strengthening ...
Products for Structural Strengthening · Structural Epoxy Putty Adhesive for Use with Structural...
Transcript of Products for Structural Strengthening · Structural Epoxy Putty Adhesive for Use with Structural...
Products forStructural Strengthening
• Primer
• Epoxy Adhesives
• Saturants
• Carbon Fiber Fabrics
• Glass Fiber Fabric
• Laminates
• Structural-Strengthening Cord
• Corrosion Protection
• Repair Epoxies
• Concrete Repair Mortars
• Coatings and Sealers
1
TABLE OF CONTENTS
Introduction ............................... 2-3
Technology Logos Index ...................3
PRODUCT INFORMATION
Primer
MapeWrap™ Primer 1 ............................ 4
Epoxy Adhesives
MapeWrap 11 ........................................ 4
MapeWrap 12........................................ 4
Saturants
MapeWrap 21........................................ 5
MapeWrap 31........................................ 5
MapeWrap 31 Slow-Set ........................ 5
Carbon Fiber Fabrics
MapeWrap C Uni-Ax 300 ...................... 6
MapeWrap C Uni-Ax 600 ...................... 6
MapeWrap C Bi-Ax ................................ 6
Glass Fiber Fabric
MapeWrap G Uni-Ax ............................. 7
Laminates
Carboplate™ E 170 ................................. 7
Maperod ™ C .......................................... 7
Structural-Strengthening Cord
MapeWrap C Fiocco .............................. 8
Corrosion Protection
Mapefer ™ 1K ......................................... 8
Planibond ® 3C ...................................... 8
Mapeshield ™ I ....................................... 9
Repair Epoxies
Planibond AE ........................................ 9
Planibond AE Fast ................................. 9
Epojet ™ ................................................10
Concrete Repair Mortars
Planitop ® X ..........................................10
Planitop XS ..........................................10
Planitop 12 SR .....................................11
Planitop 15 ...........................................11
Planitop 21 ...........................................11
Coatings and Sealers
Mapelastic ® .........................................12
Elastocolor ® Primer WB ......................12
Elastocolor Flex ...................................12
Elastocolor Coat ..................................13
Elastocolor Paint ..................................13
2
Introduction
A WORLDWIDE LEADEROriginally established in 1937, today MAPEI is a privately
owned global corporation headquartered in Milan, Italy, with 81
subsidiaries including 73 plants in 34 countries. The company
specializes in manufacturing chemical products for building,
including waterproofing products, specialty mortars and
admixtures for concrete, products to restore historic buildings,
and decorative and protective coatings for concrete surfaces.
In addition, MAPEI is the world leader in the manufacturing of
mortars, grouts, adhesives and complementary products for
installing all types of floor and wall coverings. MAPEI Corporation,
the division responsible for supporting the North American
markets, is based in Deerfield Beach, Florida, and employs over
1,100 team members – ranging from Manufacturing and R&D to
Technical Services and Sales. The Canadian subsidiary MAPEI Inc.
supports those efforts with about 300 additional employees.
SUPERIOR PRODUCTS
A Complete Range of Products
MAPEI produces the most innovative products for the
construction market. Around 5,000 products globally
(adhesives, sealants, mortars, admixtures, latex, etc.) are
manufactured in MAPEI’s plants, which produce the world’s
most complete range of building products. Diversified,
high-quality chemical products – from powdered adhesives, to
liquid and paste products, to polymers – are created to meet the
needs of more than 66,000 customers around the world.
Quality Control
MAPEI is an ISO 9001-2000 certified
company. Its products are produced
according to exacting standards, strictly
adhering to process and procedural guidelines with documented
compliance. This rigid production format is vigilantly followed to
ensure that every product is produced uniformly from batch to
batch.
PROFESSIONAL SUPPORT NETWORK
Knowledgeable Sales Force
MAPEI offers the largest, most highly trained sales
force within the industry to serve your needs for product
application/installation recommendations. Its sales representatives
are focused on supporting you with product knowledge, product
demonstrations, product information, marketing support materials
and other relevant tools to help you generate sales.
Technical Expertise
An in-house Technical Services
Call Center responds to customers’
telephone inquiries with answers
to installation challenges in real
time. In addition, MAPEI can offer
field support for job startups,
product training and on-site
problem resolution.
PRODUCTS FOR WOOD FLOORING
FLOOR COVERING INSTALLATION SYSTEMS
CONCRETE RESTORATION SYSTEMS
TILE & STONE INSTALLATION SYSTEMS
WATERPROOFING SYSTEMS
PRODUCTS FOR STRUCTURAL STRENGTHENING
ADMIXTURES FOR CONCRETE
PRODUCTS FOR UNDERGROUND CONSTRUCTION
CEMENT ADDITIVES
PRODUCTS FOR THE MARINE INDUSTRY
10 PRODUCT LINES IN NORTH AMERICA
31-800-42-MAPEI (1-800-426-2734) • www.mapei.com1-800-42-MAPEI (1-800-426-2734) • www.mapei.com
Technology Logos Index
Technology Logos IndexIntroduction
Products with MAPEI’s “Green Innovation” logo are developed and manufactured to assist our customers in meeting the health and well-being requirements of certification programs such as LEED, the Living Building Challenge (LBC) and the Well Building Standard.
MAPEI’s BioBlock technology has been added to select products to help protect them from mold and mildew.
Corrosion Inhibitor Enhanced repair mortars feature proprietary additives that fortify the passivation layer on embedded reinforcing steel, enhancing its resistance to corrosion.
Products featuring High-Hydrated Cement Technology (HCT™) offer high early strength, excellent workability, ultra fast curing, unmatched long-term durability and efflorescence-free curing.
MAPEI mortars with Easy Glide Technology offer extreme ease of application, yielding a buttery consistency that reduces fatigue during troweling.
MAPEI’s FastTrack Ready products reduce the required steps of an installation and/or perform more quickly than current technology.
CORROSIONINHIBITOR
Customer Service Plus
MAPEI’s standards for customer service are best-in-class. Our leadership includes such
service innovations as:
• Customer-friendly, efficient processes
• One-call resolution
• Employee commitment to effective customer dialog
Innovative Research & Development
Worldwide, more than 12% of MAPEI
employees are involved in the development
of new technologies and product
innovations, keeping our customers at the
forefront of the industry. The company has
taken the additional initiative of focusing
its R&D efforts on environmentally
sustainable solutions.
To remain on the cutting edge
of innovation, MAPEI reinvests
5% of its annual revenues into researching and developing new products and
technologies; in particular, 70% of its R&D efforts are directed to
develop eco-sustainable and environmentally friendly products,
which meet LEED requirements.
Best-BackedSM Warranty Program
To bring it all together, MAPEI complements the industry’s best
products with simple, easy-to-understand requirements
for a variety of warranty options.
4
Primer Epoxy Adhesives
Low-Viscosity, 100%-Solids Epoxy Resin Primer
MapeWrap Primer 1 is a 100%-solids, moisture-tolerant, low-viscosity, two-component epoxy resin that is used for priming concrete substrates prior to application of the MapeWrap system.
MapeWrap™ Primer 1
Product Code
Packaging
Structural Epoxy Putty Adhesive for Use with Structural Strengthening Systems
MapeWrap 11 is a two-component, 100%-solids, moisture-tolerant, structural epoxy used as an adhesive for the Carboplate composite system. MapeWrap 11 is also used for leveling uneven concrete or masonry surfaces before application of MapeWrap fabrics or Carboplate and Maperod ™ C laminates.
MapeWrap™ 11
Structural Epoxy Putty Adhesive for Use in Hot Climates
MapeWrap 12 is a two-component, 100%-solids, moisture-tolerant, structural epoxy used as an adhesive for the Carboplate composite system in hot climates. MapeWrap 12 is also used for leveling uneven concrete or masonry surfaces before application of MapeWrap fabrics or Carboplate and Maperod ™ C laminates.
MapeWrap™ 12
Product Code Packaging
U.S./ Canada 7324004B Kit: 1 U.S. gal. (3,79 L)
Product Code Packaging
U.S./ Canada 7320104B Kit: 1 U.S. gal. (3,79 L)
Product Code Packaging
U.S./ Canada 7321104B Kit: 1 U.S. gal. (3,79 L)
51-800-42-MAPEI (1-800-426-2734) • www.mapei.com
Saturants
Epoxy AdhesivesSaturants
Primer
Low-Viscosity, 100%-Solids Epoxy Resin
MapeWrap 21 is a 100%-solids, moisture-tolerant, low-viscosity epoxy resin for impregnating MapeWrap composite system fabrics by a wet layup method immediately before they are placed. MapeWrap 21 may be applied by an automated saturation device or manually to provide complete encapsulation of both carbon and glass fiber fabrics.
Medium-Viscosity, 100%-Solids Epoxy Resin
MapeWrap 31 is a 100%-solids, moisture-tolerant, medium-viscosity epoxy resin used for impregnating MapeWrap composite system fabrics by a dry layup method. MapeWrap 31 was specially developed to saturate and encapsulate carbon and glass fiber fabrics.
Medium-Viscosity, 100%-Solids Epoxy Resin
MapeWrap 31 Slow-Set is a 100%-solids, moisture-tolerant, medium-viscosity epoxy resin primarily used for impregnating MapeWrap composite system fabrics by a dry layup method. MapeWrap 31 Slow-Set was specially developed to saturate and encapsulate carbon and glass fiber fabrics in hot climates.
MapeWrap™ 21 MapeWrap™ 31 MapeWrap™ 31 Slow-Set
Product Code Packaging
U.S./ Canada 40321000 Kit: 1 U.S. gal. (3,79 L)
Product Code Packaging
U.S./ Canada
403310007323003
Kit: 1 U.S. gal. (3,79 L)Kit: 0.5 U.S. gal. (1,89 L)
Product Code Packaging
U.S./ Canada 7323104 1 U.S. gal. (3,79 L)
6
Uni-Directional Carbon Fiber Fabric
MapeWrap C Uni-Ax 300 is a high-strength, unidirectional carbon fiber fabric that, when used with the MapeWrap family of two-component epoxy adhesives, forms an externally bonded fiber-reinforced polymer (FRP) reinforcement system engineered to increase the strength of existing structural elements. MapeWrap C Uni-Ax 300 is applied to the surface of structural members in buildings, parking garages, bridges, marine piles and other structures to contribute significant strength, without increasing the dead load supported by the structure.
MapeWrap™ C Uni-Ax 300
Product Code
Packaging
High-Strength, Uni-Directional Carbon Fiber Fabric
MapeWrap C Uni-Ax 600 is a high-strength, unidirectional carbon fiber fabric that, when used with the MapeWrap family of two-component epoxy adhesives, forms an externally bonded fiber-reinforced polymer (FRP) reinforcementsystem. MapeWrap C Uni-Ax 600 is part of an engineering solution that allows for an increase in the strength of structural elements without increasing the dead load supported by the structure. MapeWrap C Uni-Ax 600 has twice the weight to surface area and twice the thickness of MapeWrap C Uni-Ax 300.
MapeWrap™ C Uni-Ax 600
Balanced, High-Strength, Bi-Directional Carbon Fiber Fabric
MapeWrap C Bi-Ax is a bi-directional carbon fiber fabric with balanced weight and having a high modulus of elasticity and high tensile strength. MapeWrap C Bi-Ax is suitable for repairing concrete structures and for improving the flexural and shear strength of reinforced concrete elements. It is also used for the confinement of axial-loaded elements (columns, bridge piers, chimneys) subjected to compressive and bending stress, and for seismic strengthening in earthquake areas. MapeWrap C Bi-Ax is installed using the “wet-layup” system where the fabric is saturated immediately before placement and the “dry-layup” system where the fabric is saturated during application.
MapeWrap™ C Bi-Ax
Product Code Packaging
U.S./ Canada
7301550
7300550
Roll: MapeWrap C Uni-Ax 300, 15.75" x 164' (40 cm x 50,0 m)Roll: MapeWrap C Uni-Ax 300, 3.94" x 164' (10 cm x 50,0 m)
Product Code Packaging
U.S./ Canada
7303050 Roll: MapeWrap C Uni-Ax 600, 15.75" x 164' (40 cm x 50 m)
Product Code Packaging
U.S./ Canada
7305550 Roll: MapeWrap C Bi-Ax 230, 15.75" x 164' (40 cm x 50 m)
Carbon Fiber Fabrics
71-800-42-MAPEI (1-800-426-2734) • www.mapei.com
High-Strength, Uni-Directional E-Glass Fiber Fabric
MapeWrap G Uni-Ax is a high-strength, unidirectional E-glass fiber fabric that, when used with the MapeWrap family of two-component epoxy adhesives, forms an externally bonded fiber-reinforced polymer (FRP) reinforcement system engineered to increase the strength of structural elements. When applied to the surface of structural members in buildings, parking garages, bridges, marine piles and other structures, MapeWrap G Uni-Ax improves the seismic performance of concrete columns, masonry and concrete walls, and concrete beam-column connections.
Pultruded Carbon Fiber Plate Pre-Impregnated in Epoxy-Based Resin
Carboplate E 170 is a range of pultruded carbon-fiber-reinforced polymer (CFRP) plates designed for external structural strengthening of existing concrete, wood, masonry and steel members. Carboplate E 170 is externally bonded onto the surface of the substrate to strengthen and stiffen existing structures, using an epoxy resin specifically designed for the application. Carboplate E 170 is protected on both sides by a plastic film, eliminating the need for solvent cleaning of the plates before installation.
MapeWrap™ G Uni-Ax Carboplate™ E 170
Product Code Packaging
U.S./ Canada
7303450 Roll: MapeWrap G Uni-Ax 900, 23.6" x 164' (60 cm x 50 m)
Product Code Packaging
U.S./ Canada
7330076 7330576 73299767330476733047773309767331076
Roll: 2" x 82' (50 mm x 25 m) Roll: 4" x 82' (100 mm x 25 m) Roll: 2" x 82' (50 mm x 25 m) Roll: 4" x 82' (100 mm x 25 m) Roll: 4"x 164' (100 mm x 50 m)Roll: 4.7" x 82' (120 mm x 25 m) Roll: 6" x 82' (150 mm x 25 m)
Glass Fiber
FabricLaminates
Glass Fiber FabricLam
inatesCarbon Fiber Fabrics
Pultruded, High-Strength Carbon Fiber Rod Pre-Impregnated in Epoxy-Based Resin
Maperod C is a range of pultruded carbon fiber rods, with high tensile strength and a modulus of elasticity of 22.5 x 106 psi (155,000 N/mm²). After the plastic film is removed, the Maperod C “near surface-mounted” rods are used for structural repairs and strengthening of structural elements in reinforced concrete, brickwork, stone or volcanic ash that has been damaged by either physical/mechanical stresses or natural events. Maperod C may be used together with the fabrics from the MapeWrap ™ range for stronger anchoring, particularly when flexural or shear strengthening operations are carried out.
Maperod™ C
Product Code Packaging
U.S./ Canada
7339531 7339630
Rods: Maperod C 150/10, 3/8" x 19.68' (10 mm x 6 m) Rods: Maperod C 150/8, 5/16" x 19.68' (8 mm x 6 m)
8
Structural-
Strengthening Cord
Corrosion
Protection
Uni-Directional Carbon Fiber Cord for Structural Strengthening
MapeWrap C Fiocco is a high-strength cord made from uni-directional carbon fiber threads, designed to be impregnated with MapeWrap 21 to provide structural restoration of concrete and masonry elements. MapeWrap C Fiocco is particularly suited for restoration of historical structures, including vaulted ceilings and walls of brick and stone facades. MapeWrap C Fiocco cords are available in diameters of 1/4" (6 mm), 5/16" (8 mm), 3/8" (10 mm) and 1/2" (12 mm), and in 32.8-foot (10-m) rolls.
MapeWrap™ C Fiocco
Product Code Packaging
U.S./ Canada
7315010731521073154107315610
Cord: 1/4” (6 mm)Cord: 5/16” (8 mm) Cord: 3/8” (10 mm)Cord: 1/2” (12 mm)
Corrosion-Inhibiting Coating for Reinforcing Steel
Mapefer 1K is a one-component anticorrosion coating based on unique polymers, cementitious binders and corrosion inhibitors. Mapefer 1K is specially formulated for application on near-white reinforcing steel to inhibit oxidation and rust formation.
Mapefer™ 1K
Product Code Packaging
U.S./ Canada 276645 10 lbs. (4,54 kg)
CORROSIONINHIBITOR
Three-Component, Cementitious Corrosion Inhibitor and Bonding Agent
Planibond 3C is a three-component, cementitious, moisture-tolerant, water-based, epoxy-modified corrosion inhibitor and bonding agent.
Planibond® 3C
Product Code Packaging
U.S./ Canada
36364000
363440001964007B
Large kit (Parts A and B): 10.8 lbs. (4,90 kg)Part C: 44 lbs. (20,0 kg) Small kit: 1.74 U.S. gals. (6,59 L)
CORROSIONINHIBITOR
91-800-42-MAPEI (1-800-426-2734) • www.mapei.com
Repair Epoxies
Pure Zinc Galvanic Anode
Mapeshield I is a pure zinc anode for cathodic protection of reinforcing steel against corrosion in new, reinforced structures as well as structures requiring repair.
Mapeshield™ I
Product Code Packaging
U.S./ Canada
2099024 2099124 2099212 2099312
Mapeshield I 10/10, 24 per carton Mapeshield I 10/20, 24 per carton Mapeshield I 30/10, 12 per carton Mapeshield I 30/20, 12 per carton
High-Strength, Nonsag Epoxy Anchoring Gel
Planibond AE is a high-strength, moisture-tolerant, low-VOC, two-part, nonsag, epoxy anchoring gel designed for a wide variety of bonding and repair applications.
Planibond® AE
Product Code Packaging
U.S./ Canada
19615561961508
Dual cartridge: 20.3 U.S. oz. (600 mL) Kit: 2 U.S. gals. (7,57 L)
Corrosion ProtectionRepair Epoxies
Structural-Strengthening Cord
Rapid-Setting, High-Strength, Epoxy Anchoring Gel
Planibond AE Fast is a rapid-setting, high-strength, moisture-tolerant, two-component, 100%-solids, epoxy anchoring gel designed for a wide variety of vertical/horizontal bonding and repair applications.
Planibond® AE Fast
Product Code Packaging
U.S./ Canada
19628561962808
Dual cartridge: 20.3 U.S. oz. (600 mL) Kit: 2 U.S. gals. (7,57 L)
10
Repair EpoxiesConcrete Repair
Mortars
One-Component, Fast-Setting, Extended-Working-Time, Vertical and Overhead Repair Mortar
Planitop XS is an extended-working-time variation of Planitop X. Shrinkage-compensated, fiber-reinforced, polymer-modified and containing a corrosion inhibitor, Planitop XS features Planitop X ’s outstanding workability and versatility.
Planitop® XS
Product Code Packaging
U.S. 13050000 13051000
Bag: 50 lbs. (22,7 kg) Pail: 50 lbs. (22,7 kg)
Canada 13050000 Bag: 50 lbs. (22,7 kg)
High-Modulus, Low-Viscosity Epoxy Injection Resin for Crack Repair
For professional use only
Epojet is a high-strength, moisture-tolerant, two-component, 100%-solids, low-viscosity epoxy resin for pressure injection and sealing of cracks in structural concrete, masonry and wood. Epojet meets AASHTO M235 specifications; and USDA specifications for food-processing areas.
Epojet™
Product Code Packaging
U.S./ Canada
156154 156112
Dual cartridge: 13.5 U.S. oz. (399 mL) Kit: 3 U.S. gals. (11,4 L)
One-Component, Fast-Setting, Fiber-Reinforced, Vertical and Overhead Repair Mortar
Planitop X is a one-component, fiber-reinforced, shrinkage-compensated, high-early-strength, fast-setting, polymer-modified, high-build cementitious repair mortar with a corrosion inhibitor.
Planitop® X
Product Code
PackagingProduct Code Packaging
U.S./ Canada
12850000 12850010 12851000
Bag: 50 lbs. (22,7 kg) Bag: 10 lbs. (4,54 kg) Pail: 50 lbs. (22,7 kg)
CORROSIONINHIBITOR
CORROSIONINHIBITOR
111-800-42-MAPEI (1-800-426-2734) • www.mapei.com
Concrete Repair Mortars
Repair Epoxies
Sulfate-Resistant, Vertical, Overhead and Horizontal Repair Mortar with Silica Fume
Planitop 12 SR is a sulfate-resistant, one-component, shrinkage-compensated, cementitious repair mortar. Planitop 12 SR is fiber-reinforced and contains both silica fume and a corrosion inhibitor, and is intended for the repair of vertical, overhead and horizontal concrete surfaces.
Planitop® 12 SR
Product Code Packaging
U.S./ Canada 16756 Bag: 55 lbs. (24,9 kg)
CORROSIONINHIBITOR
Form-and-Pour, One-Component Repair Mortar
Planitop 15 is a one-component, shrinkage-compensated, cementitious, fiber-reinforced, fluid mortar. Planitop 15 contains a corrosion inhibitor and silica fume, and is well-suited for form-and-pour and form-and-pump applications where high early strength and flowability are required.
Planitop® 15
Product Code Packaging
U.S./ Canada 2015025 Bag: 55 lbs. (24,9 kg)
CORROSIONINHIBITOR
Thin-Build, Two-Component Rendering Mortar
Planitop 21 is a thin-build, two-component, polymer-modified cementitious mortar.
Planitop® 21
Product Code Packaging
U.S./ Canada
17545000 4024004
Part A, Bag: 45.8 lbs. (20,8 kg)Part B, Jug: 1.05 U.S. gals. (3,97 L)
12
Coatings and Sealers
Flexible, Cementitious Membrane for Waterproofing and Protecting Concrete and Masonry
Mapelastic is a cementitious membrane that waterproofs concrete and masonry. It also offers protection against chemical attack from de-icing salts, sulfates, chlorides and carbon dioxide.
Mapelastic®
Product Code
PackagingProduct Code Packaging
U.S./ Canada
39251000 (Silver) 39252000 (White) 39257000
Part A, Bag: 50 lbs. (22,7 kg) Part A, Bag: 50 lbs. (22,7 kg) Part B, Jug: 2 U.S. gals. (7,57 L)
Water-Based, 100%-Acrylic, Elastomeric Waterproof Coating
Elastocolor Flex is an elastomeric, high-build, water-based, 100%-acrylic coating to protect and decorate above-grade, vertical concrete, masonry, stucco and EIFS systems.
Elastocolor® Flex
Product Code Packaging
U.S./ Canada
Smooth texture7UC0900197UC0910197UC092019Fine texture7UB0900197UB0910197UB092019
Pail: Pastel base, 5 U.S. gals. (18,9 L) Pail: Medium base, 5 U.S. gals. (18,9 L)Pail: Transparent base, 5 U.S. gals. (18,9 L)
Pail: Pastel base, 5 U.S. gals. (18,9 L) Pail: Medium base, 5 U.S. gals. (18,9 L) Pail: Transparent base, 5 U.S. gals. (18,9 L)
M O L D A N D M I L D E W R E S I S TA N C E
Water-Based, 100%-Acrylic Primer for Elastocolor Coatings
Elastocolor Primer WB is a water-based, 100%-acrylic primer for use with Elastocolor coatings. Elastocolor Primer WB improves adhesion on porous, dusting and new substrates.
Elastocolor® Primer WB
Product Code Packaging
U.S./ Canada 2559019 Pail: 5 U.S. gals. (18,9 L)
131-800-42-MAPEI (1-800-426-2734) • www.mapei.com
Coatings and Sealers
Water-Based, High-Build, 100%-Acrylic, Waterproof Coating
Elastocolor Coat is a water-based, high-build, 100%-acrylic coating designed to protect and decorate above-grade, vertical concrete, masonry, stucco, fiber-reinforced polymer (FRP) composites and EIFS systems.
Elastocolor® Coat
Water-Based, 100%-Acrylic, High-Quality Coating
Elastocolor Paint is a high-quality, water-based, 100%-acrylic coating that forms a protective film for use on above-grade, concrete, masonry, stucco, fiber-reinforced polymer (FRP) composites and EIFS systems.
Elastocolor® Paint
Product Code Packaging
U.S./ Canada
Smooth texture7UE0900197UE0910197UE092019Fine texture7UD0900197UD0910197UD092019
Pail: Pastel base, 5 U.S. gals. (18,9 L) Pail: Medium base, 5 U.S. gals. (18,9 L) Pail: Transparent base, 5 U.S. gals. (18,9 L)
Pail: Pastel base, 5 U.S. gals. (18,9 L) Pail: Medium base, 5 U.S. gals. (18,9 L) Pail: Transparent base, 5 U.S. gals. (18,9 L)
Product Code Packaging
U.S./ Canada
7UA0900197UA0910197UA092019
Pail: Pastel base, 5 U.S. gals. (18,9 L) Pail: Medium base, 5 U.S. gals. (18,9 L) Pail: Transparent base, 5 U.S. gals. (18,9 L)
M O L D A N D M I L D E W R E S I S TA N C E
M O L D A N D M I L D E W R E S I S TA N C E
For registration information on U.S. seminars, please contact Sophia D’Amico-Campbell at (954) 246-8555. For registration information on Canadian seminars, please contact Marie-Christine Mercier at (450) 662-1212.
The MAPEI Technical Institute (MTI) provides the highest-quality, basic product knowledge with demonstrations and hands-on training to architects, contractors, installers and distributors in 9 locations: Deerfield Beach (FL), San Bernardino (CA), Garland (TX), Dalton (GA), West Chicago (IL) and Swedesboro (NJ), all in the USA; and Laval (Quebec), Brampton (Ontario) and Delta (British Columbia), all in Canada.
MAPEI Headquarters of North America1144 East Newport Center Drive Deerfield Beach, Florida 33442 1-888-US-MAPEI (1-888-876-2734) / (954) 246-8888
Technical Services1-888-365-0614 (U.S. and Puerto Rico) 1-800-361-9309 (Canada)
Customer Service1-800-42-MAPEI (1-800-426-2734)
Services in Mexico0-1-800-MX-MAPEI (0-1-800-696-2734)
Copyright ©2018 by MAPEI Corporation (“MAPEI”) and all rights are reserved. All intellectual property rights and other information contained in this document are the exclusive property of MAPEI (or its parent or related companies), unless otherwise noted. No part of this document may be reproduced or transmitted in any form without the prior written consent of MAPEI.
Edition Date: January 1, 2018
PR: 8628 MKT: 17-2572 Printed in the USA.
MAPEI Americas