www.eaton.com

Quick Start

Network Shutdown Module V3 - Guide Utilisateur - 34 003 896 XU / AD

To install the Network Shutdown Module in 5 minutes, please perform the following steps on a machine running Windows 2000 / XP / 2003 / 2008 / Vista, Linux or Mac OSX: Step 1 (Pre-requisites)

Check that following connections are operational: > the electrical connection between the UPS and the server to protect > the network connection between the UPS and the Network Management Card (or Proxy).

Step 2 (Optional) To enable the configuration and supervision remote access, Network Shutdown Module needs the 4679 and 4680 ports (UDP/TCP) to be opened in the Firewall (Automatically opened in the Windows Firewall).

Step 3 (Software Installation) On a Windows 2000 / XP / 2003 / 2008 / Vista, Linux or Mac OSX machine, execute the Network Shutdown Module package under an administrator account.

Step 4 (Configuration) > In the Configuration->Power devices screen, Enter the default Login admin and default Password admin Then click on the Add button and > Enter the IP (or the host name) of the Network Management Card (or Proxy) or use the following new function: New: With the Quick Scan button, available with version 3.10 and later, you can discover in a few seconds the cards connected to the network and then select a card from the list.

> Save your configuration >In the Configuration->Users window configure your password (recommended) > For the multi-UPS configurations, please refer to chapter 6

Step 5 (Operation) You can now supervise the UPS state and the information concerning the protected server