Quick start guide - Scanner FS6 - Lennerts & Partner · LENNERTS & PARTNER GmbH Scanner FS6 - Quick...

Scope of delivery Seite 0

Version: 26. Mai 2020

Scanner FS6

Quick start guide

LENNERTS & PARTNER GmbH

Scanner FS6 - Quick start guide

Page 1 of 12

Scanner FS6

CONTENT

1 Scope of delivery ..................................................................................................... 2

1.1 Device ................................................................................................................. 2

1.2 Docking station .................................................................................................... 3

1.3 Bluetooth handle .................................................................................................. 3

2 Device specification .................................................................................................. 4

3 Buttons and ports .................................................................................................... 5

4 Battery removal ....................................................................................................... 6

5 Memory / SIM card .................................................................................................. 7

6 Configuration barcodes ............................................................................................. 8

6.1 ENTER as suffix .................................................................................................... 9

6.2 ESCAPE as prefix .................................................................................................. 9

6.3 Delay after prefix ................................................................................................ 10

6.4 Turbo mode ....................................................................................................... 10

6.5 Reset ................................................................................................................ 10

7 Bluetooth handle ................................................................................................... 11

7.1 Buttons and ports ............................................................................................... 11

7.2 LED ................................................................................................................... 12

7.3 Pairing ............................................................................................................... 12



Page 2 of 12

1 SCOPE OF DELIVERY

1.1 DEVICE

FS6 Power plug

USB/Micro-USB cable

Hand strap



Page 3 of 12

1.2 DOCKING STATION

Docking station

Power supply

1.3 BLUETOOTH HANDLE

Bluetooth handle

Battery (9V)



Page 4 of 12

2 DEVICE SPECIFICATION

Temperature range

Usage -20°C to +60°C

Storage -30°C to +70°C

Protection classes

IP65 Complete touch protection, protection from dust, protected against wa-

ter jets (from any direction)

MIL-STD 810G Falls from up to 1,2m height



Page 5 of 12

3 BUTTONS AND PORTS

No Button / Port No Button / Port

1 HOME-Button 11 <adjustable>

2 Microphone 12 Camera (back)

3 Camera (front) 13 Mounting support for hand strap

4 Speaker (front) 14 Speaker (back)

5 Ambient light sensor 15 Battery lock

6 Barcode scanner 16 Battery

7 Infrared 17 Volume-Button (+)

8 Audio output 18 Volume-Button (-)

9 Micro-USB 19 Scan button

10 Power button 20 Connector for docking station



Page 6 of 12

4 BATTERY REMOVAL

To remove the battery open the battery lock first.

Now the battery can be lifted near the battery lock.

Afterwards the battery can be removed.



Page 7 of 12

5 MEMORY / SIM CARD

To insert a memory or SIM card remove the battery first.

No Slot

1 Memory card slot (SDHC / SDXC)

2 SIM card slot



Page 8 of 12

6 SETUP AND CONFIGURATION

After receiving the device it needs tob e configured. For this purpose, an employee of LENNERTS

& PARTNER GmbH needs to access the scanner via TeamViewer.

Please follow these steps:

1. Turn the device on.

2. Connect the device in the settings to the WIFI.

3. Start the pre-installed TeamViewer application.

4. Send the TeamViewer ID to the support of LENNERTS & PARTNER GmbH

([email protected]).

5. An employee of LENNERTS & PARTNER GmbH will connect each app to the database.



Page 9 of 12

7 CONFIGURATION BARCODES

7.1 ENTER AS SUFFIX

CR suffix

7.2 ESCAPE AS PREFIX

1. Prefix

4. 0

2. 9

5. F

3. 9

6. Save



Page 10 of 12

7.3 DELAY AFTER PREFIX

1. Delay length

5. Delay character

2. 2

6. 0

3. 0

7. F

4. Save

8. Save

7.4 TURBO MODE

Turbo mode on

Turbo mode off

7.5 RESET

Clear all prefix

Clear all suffix



Page 11 of 12

8 BLUETOOTH HANDLE

8.1 BUTTONS AND PORTS

No Button / Port Function

1 Power switch To turn the Bluetooth handle on / off

2 Scan trigger To trigger the scan process

3 LED indicator Shows the operational status of the Bluetooth handle

4 Battery bay To open / close the battery bay



Page 12 of 12

8.2 LED

Indication Description

LED does not glow Bluetooth handle is turned off

LED glows Bluetooth handle is turned on and ready

LED flashes (1 second in-

tervals)

Bluetooth handle is turned on but not paired to a device

LED flashes (0,5 second

intervals)

Bluetooth handle is turned on and waits for pairing

8.3 PAIRING

To pair the Bluetooth handle to a device please follow these steps:

1. Press and hold the scan trigger.

2. Turn the Bluetooth handle on.

3. Search for the handle (BLE_Handle) in the Bluetooth settings of the device.

4. Start the pairing procedure on the device.

Quick start guide - Scanner FS6 - Lennerts & Partner · LENNERTS & PARTNER GmbH Scanner FS6 - Quick...

Documents

Transcript of Quick start guide - Scanner FS6 - Lennerts & Partner · LENNERTS & PARTNER GmbH Scanner FS6 - Quick...