QA Test Report - Elmarksupport.elmark.com.pl/moxa/products/Switche_przemyslowe/... · 2009. 8....

MOXA

QA Test ReportI .J

Report Number: DVEAA0612

Project Number: NP05092201&NP05092201-1

Products Model: EDS-316 Series

(Product Environmental Test)

Temperature Cycle & High Temperature High Humidity operation TestLow Temperature Power ON/OFF TestTemperature & Humidity Storage TestVibration TestShock Test

Drop Test

QA Manager: ~I\~->I-o (, Prepare By :-A)",v0 CfA.04 - 2- I '-"Cl~'

Moxa Technologies Co., Ltd.

QA Test Report

Report Number：DVEAA06012 Page：2/32

Table of Contents 1.Product Specifications ---------------------------------------------------------------- 3 2. Temperature Cycle & High Temperature High Humidity operation

Test----------------------------------------------------------------------------------------- 4 3.Low Temperature Power ON/OFF Test ------------------------------------------ 7 4.High Temperature High Humidity Storage Test------------------------------- 9 5.Low Temperature Storage Test --------------------------------------------------- 11 6.Vibration Test --------------------------------------------------------------------------- 13 7.Shock Test-------------------------------------------------------------------------------- 24 8.Drop Test --------------------------------------------------------------------------------- 30

QA Test Report


Product Specifications Power Requirements Power Input：12~ 45 VDC Environmental Operating Temperature： 0 ~ 60℃ Operation Humidity：5 ~ 95% Storage Temperature：- 40 ~ 85℃ Storage Humidity：95% max.

Fiber Connector

10/100M Ethernet RJ45

Power Input 12~48 VDC

QA Test Report


Temperature Cycle & High Temperature High Humidity Operation Test

Product Model：EDS-316 Series Test Period：From 12-16-05’ PM 21：48

To 12-18-05’ AM 12：13 Sample Source：Engineering Sample Test Standard：IEC-68-2-3 Samples Q’ty：6Units Test N：Change of Temperature Test Sample S/N：EDS-316-01、EDS-316-02、EDS-316-03、

EDS-316-SS-SC-80-01、EDS-316-SS-SC-80-02、EDS-316-SS-SC-80-03 Test Condition：

1. High Temperature：60℃ 2. High Humidity：95%RH 3. Room Temperature：25℃ 4. Room Humidity：45%RH 5. Retention Period：36.5Hr 6. Temperature Slope：1℃/min 7. Input Voltage：DC 24V

Test Environment Curve：

Humidity

95﹪

45﹪

0﹪ High Temperature

60℃

25℃

-5℃ Low Temperature

0 1 1.5 3.5 4.5 6.5 7.5 9.5 10.5 34.5 35.5 36.5Hr

QA Test Report


Test Method： 1.Power ON and run the auto program with full cycle。 2.Do not need to remove the test sample’s power supply , when temperature or

humidity is changing。 3.After auto test is accomplished , put the test samples under 25℃ for full function

test。 4.Checking samples appearance and function。

Photograph：

airU2

U10

Fiber

D6

U1

QA Test Report


Proceedings： Temperature / Humidity

12-16 12-17 12-18 DATE Check Item PM AM PM AM

Check Time 22；49 11：50 17 : 50 08：33 Temperature 25.0℃ 59.9℃ 60.0℃ 59.9℃

Humidity（%） 45.0% 95.0% 95.0% 95.0% Components & Location Test ambient

D6 (Diode 100V 16A) 43.4 77.2 77.2 77.2

U10 (IP1718) 49.2 82.7 82.7 82.6

Fiber U1 (Transceiver SC1315-40APO(WT1) 46.6 79.8 79.5 79.6

Power air 46.9 79.9 79.8 79.6

Power U1 (REGULATOR L4973D3.3) 48.0 81.4 81.4 81.4

Power U2 (REGULATOR L4973D3.3) 50.0 83.2 83.2 83.2

Test Result：PASS

1. Visual Inspection：Products exterior and structure without any non-conforming condition。

2. Electronic Function：Products function without any error。 Test Equipments：

1. Temperature / Humidity Chamber：KSON THS-E4C-100 2. Temperature Recorder：TECPEL DTM-319

Test Location：MOXA Quality Assurance Laboratory

QA Test Report


Low Temperature Power ON/OFF Test Product Model：EDS-316 Series Test Period：From 12-18-05’ PM 12：14 To 12-19-05’ AM 12：13 Sample Source：Engineering Sample Samples Q’ty：6 Units Test Sample S/N：EDS-316-01、EDS-316-02、EDS-316-03、EDS-316-SS-SC-80-04、

EDS-316-SS-SC-80-05、EDS-316-SS-SC-80-06 Test Condition：

1. Low Temperature：-5℃ 2. Low Humidity：0%RH 3. Power ON Time：3Min 4. Power OFF Time：2Min 5. Room Temperature：25℃ 6. Room Humidity：45%RH 7. Retention Period：15.5Hrs 8. Test Time：12Hrs 9. Temperature Slope：1℃/min

10. Input Voltage：DC 24V Test Environment Curve:

Humidity

45﹪

0﹪

High Temperature

25℃ -5℃

Low Temperature 0 1 1.5 25.5 26 27 Hr

QA Test Report


Test Method： 1. Power ON for 3 min to make sure the sample work properly , then power

OFF for 2 min to make sure the sample stops without any further action。 2. Repeat step1 150 times till power ON/OFF test is finished。 3. After auto test is accomplished , put the test samples under 25℃ for full

function test。 4. Checking samples appearance and function。

Test Result：PASS

1. Visual Inspection：Products exterior and structure without any

non-conforming condition。 2. Power ON/OFF：The products is distinguished in heat and low temperature

conditions the progress power on/ off tests 300 times, non - creation any bad question。

3. Electronic Function：Products function test without any error。

Test Equipments： 1.Temperature / Humidity Chamber：KSON THS-D4C-100 2.Auto Power ON/OFF tester (DSR)


QA Test Report


High Temperature High Humidity Storage Test Report

Product Model：EDS-316 Series Test Period：From 03-30-06’ AM：10：23 To 03-31-06’ PM：14：59

Sample Source：Finished products Samples Q’ty：1 Units Test refer Standard：IEC-68-2-48

Guidance on application of the test of IEC68 to simulate the effects of storage Test Sample S/N：axdNC0700005 Test Condition：

1. Room Temperature：25℃ 2. Room Humidity：45% 3. High Temperature：90℃ 4. High Humidity：95%RH 5. Retention Period：24Hr 6. Temperature Slope：1℃/min


Humidity 95﹪ 45﹪

High Temperature

90℃

25℃ Temperature

0 1 2 26 27 28 Hr

QA Test Report


Photograph：

Test Result：PASS



Test Equipments： 1. Temperature / Humidity Chamber：KSON THS-D4C-100


QA Test Report


Low Temperature Storage Test Report

Product Model：EDS-316 Series Test Period：From 03-31-06‘ PM：16：46 To 04-01-06’ PM：21：19

Sample Source：Finished products Samples Q’ty：1 Units Test refer Standard：IEC-68-2-48

Guidance on application of the test of IEC68 to simulate the effects of storage Test Sample S/N：axdNC0700006 Test Condition：

1. Room Temperature：25℃ 2. Room Humidity：45% 3. Low Temperature：-40℃ 4. Low Humidity：0%RH 5. Retention Period：24Hr 6. Temperature Slope：1℃/min


Humidity 45%

0%

Temperature 25℃

-40℃ Low Temperature

0 1 2 26 27 28 Hr

QA Test Report


Photograph：

Test Result：PASS

1.Visual Inspection：Products exterior and structure without any non-conforming condition。

2.Electronic Function：Products function test without any error。

Test Equipments： 1. Temperature / Humidity Chamber：KSON THS-D4C100


QA Test Report


Vibration Test Report Product Model：EDS-316 Series Test Date：01-13-06’、04-06-06’

Test Samples：17 Units Sample Source：Engineering Sample、Finished Product Test Standard：IEC-68-2-6 Test Fc and guidance：Vibration sinusoidal

IEC-68-2-34 Test Fd：Random vibration wide band General requirements

Test Sample S/N：1. Sine vibration test(Resonance Search) & (Operation) EDS-316-SS-SC-80KM

2. Random vibration test(Package) axdNC0700007、axdNC0700006、axdNC0700005、axdNC0700003、axdNC0700010、axdNC0700008、axdNC0700004、axdNC0700001、axdNC0700009、axdNC0700002、axgNC0900005、axiNC0700002、axiNC0700001、axiNC0700005、axiNC0700004、axiNC0700003

QA Test Report


Test Condition： Test Environment 1. Test Environment：20 +/- 2℃ 2. Test Humidity：70 +/- 20%RH (1) Sine vibration test(Resonance Search) 1. Frequency：5~500 Hz 2. Accelerate：1g 3. Sweep cycle：1Oct/min 4. Test Axis： X,Y,Z Axis 5. Test Time：13 min 17 sec(each axis) 6. Total Test Time：39 min 51 sec

(2)Sine wave vibration test(Operation) 1. Frequency：2~100 Hz 2. Accelerate：0.7grms(13.2~100Hz) 3. Displacement：2mm(p-p)(2~13.2Hz) 4. Sweeping Rate：1 Oct/min 5. Test Axis： X,Y,Z Axis 6. Test Time：1 hr 30 min 19 sec(each axis) 7. Total Test Time：4 hrs 30 min 57 sec

(3)Sine wave vibration test(Operation) 1. Frequency：3~150 Hz 2. Accelerate：1grms(9~150Hz) 3. Displacement：7mm(3~9Hz) 4. Sweep cycle：1Oct/min 5. Sweep cycle： 10 cycle 6. Test Axis： X,Y,Z Axis 7. Test Time：1 hr 52 min 54 sec(each axis 8. Total Test Time：5 hrs 38 min 36 sec

(4)Random vibration test(Package) 1. Frequency：5~500 Hz 2. Accelerate：3.0 g rms 3. P.S.D：0.0181854 g2/Hz 4. Test Axis： X,Y,Z Axis 5. Test Time：1 hr(each axis) 6. Total Test Time：3 hrs

QA Test Report


Test Photograph： Sine vibration test (Resonance Search) Sine wave vibration test (Operation)

Axis X

Axis Y

Axis Z

QA Test Report


Random vibration test (Package) Axis X

Axis Y

Axis Z

QA Test Report


Test Frequency Curve： 5~500Hz 7mm 1g Resonance Search Axis X

Axis Y

QA Test Report


Axis Z

2~13.2~100Hz 2mm 0.7g Operation Axis X

QA Test Report


Axis Y

Axis Z

QA Test Report


3~9~150Hz 7mm 1g Axis X

Axis Y

QA Test Report


Axis Z

QA Test Report


Test Frequency Curve： 5~500Hz 3.0grms Package Axis X

Axis Y

QA Test Report


Axis Z

Test Result：PASS


2. Electronic Function：Products function test without any error。 Test Equipments：

1. Vibration Tester：KING DESIGN (KD-9363EM-600F2K-50N120, S/N：KDS11054786)

2. Controller：DACTRON (FRONT-End Box ,S/N：4529465) 3. Control Accelerometer：Wilcoxon Research (WR-777,S/N：3425) 4. Vibration Tester：KING DESIGN (KD-9363EM-600F2K-50N120,

S/N：KDS11054783) 5. Controller：DACTRON (FRONT-End Box ,S/N：5250251) 6. Control Accelerometer：Wilcoxon Research (WR-777,S/N：4208) 7. Vibration Tester：KING DESIGN (KD-9363EM-1000F2K-50N120,

S/N：KDS11054986) 8. Controller：DACTRON (FRONT-End Box ,S/N：4529465) 9. Control Accelerometer：Wilcoxon Research (WR-777,S/N：3425)

Test Location：KING DESIGE Vibration Laboratory

QA Test Report


Shock Test Report Product Model：EDS-316 Series Test Date：01-13-06’ Sample Source：Engineer products Test Samples：1 Units Test Standard：IEC-68-2-27 Test Ea：Shock Test Sample S/N：EDS-316-SS-SC-80KM Test Environment：

1.Test Environment：20 +/- 2℃ 2.Test Humidity：70 +/- 20%RH

Test Condition：

1.Accelerate：15g 2.Duration：11ms 3.Test Axis：+/- X,Y,Z Axis 4.Test Times：3 Shock / Axis 5.Operation Test

QA Test Report


Test Photograph：

Axis ±X

Axis ±Y

Axis ±Z

QA Test Report


Test Frequency Curve： Axis X

Axis -X

QA Test Report


Axis Y

Axis –Y

QA Test Report


Axis Z

Axis –Z

QA Test Report


Test Result：PASS 1.Visual Inspection：Products exterior and structure without any

non-conforming condition。 2.Electronic Function：Products function test without any error。

Test Equipments： 1.Vibration Tester：KING DESIGN (KD-9363-1000F2K-50N120,

S/N：KDS11054783) 2.Controller：DACTRON (FRONT-End Box ,S/N：5250251) 3.Control Accelerometer：Wilcoxon Research (WR-777,S/N：4208)

Test Location：KING DESIGE Vibration Laboratory

QA Test Report


Drop Test Report Product Model：EDS-316 Series Test Date：03-15-06’ Sample Source：Finished products Test Samples：16Units Test Standard：IEC-68-2-32 Test Ed：Free fall Test Sample S/N：axdNC0700007、axdNC0700006、axdNC0700005、axdNC0700003、

axdNC0700010、axdNC0700008、axdNC0700004、axdNC0700001、axdNC0700009、axdNC0700002、axgNC0900005、axiNC0700002、axiNC0700001、axiNC0700005、axiNC0700004、axiNC0700003

Test Condition：

1. Test Phase：One Corner、Three Edges、Six Faces， Total Ten Drops 2. Test Height：90cm 3. Package Weight：22.90Kg 4. package Dimension：51.8 ㎝(L)×41.8 ㎝(W)×40.5 ㎝(H)

Test Drawing：

1 Rear Side 6 Top Side

2 Left Side

4 Right Side 5 Front Side

3 Bottom Side

Mid Edge

Damage Corner

Short Edge

QA Test Report


Test Sequence：

Sequence # Orientation Specific face, edge or corner 1 Corner most fragile face-3 corner, if not known, test 2-3-5 2 Edge shortest edge radiating from the corner tested 3 Edge next longest edge radiating from the corner tested 4 Edge longest edge radiating from the corner tested 5 Face one of the smallest faces 6 Face opposite small face 7 Face one of the medium faces 8 Face opposite medium face 9 Face one of the largest faces

10 Face opposite large face Photograph：

Corner

Three Edges

QA Test Report


Six Faces

Test Result：PASS

1. Visual Inspection：Products identity exterior and structure without any non-conforming condition ,the Products Gift box damages accept。


Test Equipments：KING DESIGN KD -128 Test Location：MOXA Quality Assurance Laboratory

QA Test Report - Elmarksupport.elmark.com.pl/moxa/products/Switche_przemyslowe/... · 2009. 8....

Documents

Transcript of QA Test Report - Elmarksupport.elmark.com.pl/moxa/products/Switche_przemyslowe/... · 2009. 8....