PVC FITTINGS & VALVES - Milder · 2017. 10. 2. · fittings for agricultural irrigation and later...
Transcript of PVC FITTINGS & VALVES - Milder · 2017. 10. 2. · fittings for agricultural irrigation and later...
-
PVC FITTINGS & VALVESTechnical Catalogue
Via Gallinea, 28 - 16010 Mele (GE) Italy Tel. +39 010 63.19.015 Fax. +39 010 63.19.171 email: [email protected] - www.mgmeccanoplastica.eu
-
Plasson’s innovative products revolutionized the way of connecting polyethylene pipes in the 1960’s. We started with fittings for agricultural irrigation and later developed products for urban water distribution.
High pressure PVC Fittings and Valves are part of Plasson’s wide range of products. Plasson has achieved superior designs and products and a genuine commitment to quality, delivery and service.
Plasson continues to strive for the future environment. By buying Plasson products you help us invest in our vision of a world where clean, pure water will be everyone’s birthright.
2
INTRODUCTION
INTRODUCTION
CEMENTED FITTINGS 8-17
ADAPTOR FITTINGS 18-25
THREADED FITTINGS 26-32
FITTINGS ACCESSORIES 33-36
VALVES NORMAL SUPPORT 37-38
VALVES THREADED SUPPORT 39-43
CHECK VALVES 44-45
FOOT VALVES 46
AIR RELEASE VALVES 47
VALVES ACCESSORIES 48-52
TECHNICAL SPECIFICATIONS - FITTINGS 53-54
TECHNICAL SPECIFICATIONS - VALVES 55-56
ASSEMBLY INSTRUCTIONS 57-62
-
3
PRODUCT LIST
050100Socket - Cementedpage 8
050200Reducing SocketMale - Female - Cemented
page 9
05040090° Tee - Cementedpage 10
05050090° Elbow - Cementedpage 10
050700End Cap - Cementedpage 11
050800Union - Cementedpage 11
050900Short Reducing Bushing - Cemented page 12
05140090° Reducing TeeCemented
page 13
053600House Adaptor Cemented
page 13
05450045° Elbow - Cementedpage 14
055000Flange Adaptor with O-Ring Cementedpage 14
055100Stub Flat Face to fit 055000 Cemented page 15
055200Stub Serrated Cemented
page 15
059000Loose Flangepage 16
059100Blind Flangepage 16
059200Fixed Flangepage 17
050102Socket AdaptorCemented Threaded
page 18
050202Reducer AdaptorM - F - Cemented Threaded page 18
-
4
PRODUCT LIST
050302Adaptor SocketM - F - Cemented - Threaded page 18
05040290° TeeCemented Threaded
page 19
05050290° ElbowCemented Threaded
page 19
050602AdaptorM - F - Cemented - M - Threaded page 19
050802Union AdaptorF - Cemented - Threaded page 20
052102AdaptorM - F - Cemented - M - Threaded page 20
052202Bushing AdaptorM - F - Cemented - M - Threaded
page 20
053602House AdaptorWith Threaded Nutpage 21
05450245° ElbowCemented - Threadedpage 21
05140290° Reducing TeeCemented - Threaded page 21
057102Socket Adaptor Cemented Threaded with Reinforcing Ring page 22
057202Reduder Adaptor with Reinforcing Ring Male Cemented - Female - Threadedpage 22
05740290° Tee with Reinforcing Ring Cemented Threaded page 23
05750290° Elbow with Reinforcing Ring Cemented Threaded page 23
058900Metal Pipe & TapConnectorspage 24
058100Metal Pipe & TapConnectorspage 24
058200Metal Pipe & TapConnectorspage 25
058901Metal Pipe & TapConnectorspage 25
-
5
PRODUCT LIST
050101Socket - Threadedpage 26
050103Socket - ThreadedFemale - Female
page 26
050201ReducerMale - Female - Threaded
page 27
05040190° Tee - Threadedpage 27
05050190° Elbow - Threadedpage 28
050601Nipple - Threadedpage 28
050701Cap - Threadedpage 28
050801Union FemaleThreaded
page 29
050803Union Male - FemaleCemented Threaded
page 29
050804Union Male - Female - Threaded page 29
051601Reducing NippleThreaded
page 30
051701Plug - Threadedpage 31
053601House AdaptorThreaded
page 31
052201Nipple SocketMale - Female - Threadedpage 31
05450145° ElbowThreaded
page 32
059201Fixed FlangeThreaded
page 32
054800Nut for Unions: 050800, 050801 050802, 050803, 050804, 053602
page 33
055800Bushimg for Union: 050800
page 33
-
6
PRODUCT LIST
055801Bushimg for Unions: 050801, 050802 page 33
055803Mail Threaded Union bush for items 050803, 050804 page 34
056800End for Unions: 050800, 050802, 050803
page 34
056810End for Unions: 050801, 050804
page 34
056090O-Ring for Item055000
page 35
056290Seal for:055200, 053602
page 35
056390O-Ring for Unions 050800, 050801, 050802, 050803 050804
page 36
111500Two Nut ValveCemented
page 37
111510Two Nut ValveThreaded
page 37
113500One Nut ValveCemented page 38
113510One Nut ValveThreaded
page 38
113610One Nut ValveMale - Female - Threadedpage 38
111400Two Nut ValveCemented
page 39
111410Two Nut ValveThreaded
page 39
112400-112700*Bistop Valve Cemented
page 40
112410-112710*Bistop Valve Threaded
page 40
113400One Nut ValveCemented
page 41
113410One Nut ValveThreaded
page 41
-
7
PRODUCT LIST
113710One Nut ValveThreadedpage 42
113790One Nut ValveFemale - Threaded - Compression
page 42
111480Two Nut ValvePE End Connectorpage 43
113780One Nut ValveCompressor PE End Connectorpage 43
110800-110600110900-110000 Check Valve Cemented page 44
110810-110610110910-110010Check Valve Threaded page 44
050408Kmocker TeeCemented
page 45
116400-116000Foot ValveCemented
page 46
116410-116010Foot ValveThreaded
page 46
116300-116900Air Release ValveCementedpage 47
116310-116910Air Release ValveThreaded
page 47
111100Valve CollarCementedpage 48
111110Valve CollarThreaded
page 48
11112Blue Handlespage 49
11113Red Handlespage 49
111140Valve Nutpage 50
1115.207PE End Connectorpage 50
-
8
PVC CEMENTED FITTINGS
050100Socket - Cemented
Quality Cod d E H l Z Weight PN Pack
U C K 050100016 16 21 30 14 2 7 16 2500 U C K 050100020 20 25 35 16 3 8 16 1500 U C K 050100025 25 30 42 19 4 11 16 1000 U C K 050100032 32 38 48 22 4 20 16 600 U C K 050100040 40 48 56 26 4 42 16 300 U C K 050100050 50 58 66 31 4 64 16 180 U C K 050100063 63 73 80 38 4 119 16 100 U C K 050100075 75 88 93 44 5 234 16 100 U C K 050100090 90 104 108 51 6 325 16 60 U C 050100110 110 126 128 61 6 525 16 28 U 050100125 125 143 145 69 7 803 16 24 U 050100140 140 161 160 76 8 1074 16 18 U 050100160 160 181 181 86 9 1339 16 9 U 050100200 200 228 224 106 12 2778 10 4
050100225 225 250 257 119 19 3670 10 3*050100250 250 287 275 133 10 5800 10 2*050100280 280 320 304 147 10 7750 10 1*050100315 315 355 342 165 12 9820 10 1
H
d E
IZ
* DELIVERY PROGRAM Quality certifications : U= UNI-IIP, C= NF-CSTB, K = Kiwa
-
9
PVC CEMENTED FITTINGS
050200Reducing SocketMale - Female - Cemented
Cod Dxdxd1 L l l1 E H Weight PN Pack
050200020016 20 x 16 x 16 16 14 14 20 36 6 16 3000050200025016 25 x 20 x 16 19 16 14 22 39 10 16 1500050200025020 25 x 20 x 20 19 16 16 25 42 10 16 1500050200032016 32 x 25 x 16 22 19 14 22 41 15 16 1000050200032020 32 x 25 x 20 22 19 19 25 45 16 16 1000050200032025 32 x 25 x 25 22 19 19 31 50 20 16 800050200040016 40 x 32 x 16 26 22 14 22 50 23 16 800050200040020 40 x 32 x 20 26 22 16 26 52 26 16 700050200040025 40 x 32 x 25 26 24 19 32 49 27 16 500050200040032 40 x 32 x 32 26 22 29 39 57 35 16 500050200050020 50 x 40 x 20 31 26 16 27 61 50 16 400050200050025 50 x 40 x 25 31 26 19 33 62 50 16 300050200050032 50 x 40 x 32 33 26 22 40 65 55 16 300050200050040 50 x 40 x 40 31 26 26 49 69 65 16 300050200063025 63 x 50 x 25 38 31 19 32 72 88 16 170050200063032 63 x 50 x 32 38 31 22 40 76 93 16 170050200063040 63 x 50 x 40 38 33 26 49 79 100 16 150050200063050 63 x 50 x 50 34 31 47 61 85 123 16 150050200075032 75 x 63 x 32 44 38 22 40 86 120 16 190050200075040 75 x 63 x 40 44 38 26 49 87 130 16 170050200075050 75 x 63 x 50 44 41 42 61 92 150 16 150050200075063 75 x 63 x 63 44 38 38 73 100 163 16 110050200090040 90 x 75 x 40 51 44 26 49 99 225 16 110050200090050 90 x 75 x 50 51 44 31 62 103 232 16 100050200090063 90 x 75 x 63 51 44 38 74 111 259 16 100050200090075 90 x 75 x 75 51 44 44 89 117 290 16 80050200110050 110 x 90 x 50 61 51 31 61 117 410 16 80050200110063 110 x 90 x 63 61 51 38 76 125 441 16 65050200110075 110 x 90 x 75 61 51 44 90 133 490 16 35050200110090 110 x 90 x 90 61 51 51 106 138 545 16 45050200125063 125 x 110 x 63 69 61 38 78 121 460 16 44050200125075 125 x 110 x 75 69 61 44 90 125 460 16 44050200125090 125 x 110 x 90 69 61 51 104 126 460 16 44050200125110 125 x 110 x 110 69 61 61 123 127 440 16 32050200140110 140 x 125 x 110 76 69 61 130 149 645 16 24050200160110 160 x 140 x 110 86 76 61 130 157 825 16 25050200160125 160 x 140 x 125 86 76 69 145 160 890 16 18050200225160 225 x 200 x 160 119 106 86 185 230 2100 10 6
H
d1dD E
I I1L
-
10
05040090° Tee - Cemented
Quality Cod d E H l Z Weight PN Pack
U C K 050400016 16 23 46 14 9 18 16 1500 U C K 050400020 20 27 55 16 12 22 16 700 U C K 050400025 25 30 65 19 14 44 16 500 U C K 050400032 32 40 78 22 17 54 16 250 U C K 050400040 40 48 99 26 23 97 16 130 U C K 050400050 50 62 118 31 28 212 16 80 U C K 050400063 63 73 145 38 35 372 16 56 U C K 050400075 75 90 169 44 41 540 16 35 U C K 050400090 90 108 199 51 49 970 16 24 U C 050400110 110 129 239 61 59 1510 16 14 U 050400125 125 148 270 69 66 2234 16 9 U 050400140 140 162 298 76 73 2650 16 6 U 050400160 160 184 339 86 84 3793 10 3 *050400200 200 232 420 106 102 7200 10 2
*050400225 225 258 465 119 114 9700 10 1*050400250 250 286 519 132.5 127 12070 10 1*050400280 280 319 579 147.5 142 17480 10 1*050400315 315 360 648 165 159 24350 10 1
Z
H
dE
I
* DELIVERY PROGRAM Quality certifications : U= UNI-IIP, C= NF-CSTB, K = Kiwa
PVC CEMENTED FITTINGS
05050090° Elbow - Cemented
Quality Cod d E H l Z Weight PN Pack
U C K 050500016 16 23 35 14 9 13 16 1800 U C K 050500020 20 25 41 16 12 21 16 1000 U C K 050500025 25 31 48 19 14 32 16 600 U C K 050500032 32 39 58 22 17 40 16 350 U C K 050500040 40 47 73 26 23 69 16 200 U C K 050500050 50 59 88 32 27 125 16 130 U C K 050500063 63 73 110 38 35 300 16 60 U C K 050500075 75 90 130 44 41 450 16 50 U C K 050500090 90 108 154 51 49 730 16 30 U C 050500110 110 132 186 61 59 1232 16 17 U 050500125 125 148 211 69 66 1668 16 12 U 050500140 140 162 230 76 73 1970 16 9 U 050500160 160 184 262 86 84 2850 16 5 *050500200 200 232 324 106 102 5850 10 3
*050500225 225 258 362 119 114 7500 10 2*050500250 250 286 445 132 188 12150 10 1*050500280 280 316 496 146 210 15620 10 1*050500315 315 358 559 162 239 23500 10 1
H
d E
Z I
* DELIVERY PROGRAM Quality certifications : U= UNI-IIP, C= NF-CSTB, K = Kiwa
-
11
PVC CEMENTED FITTINGS
050700End Cap - Cemented
H
d E
I
Quality Cod d E H l Weight PN Pack
U C K 050700016 16 21 20 14 5 16 3000 U C K 050700020 20 25 24 16 10 16 2500 U C K 050700025 25 30 28 19 16 16 1400 U C K 050700032 32 38 32 22 28 16 1000 U C K 050700040 40 48 42 26 51 16 500 U C K 050700050 50 58 47 31 60 16 320 U C K 050700063 63 73 57 38 106 16 150 U C K 050700075 75 88 63 44 179 16 75 U C K 050700090 90 104 73 51 270 16 45 U C 050700110 110 126 85 61 416 16 25 U 050700125 125 143 98 69 640 16 40 U 050700140 140 161 108 76 905 16 30 U 050700160 160 181 123 86 1160 16 20
Quality certifications : U= UNI-IIP, C= NF-CSTB, K = Kiwa
050800Union - Cemented
Cod d E H l L1 Z Weight PN Pack
050800016 16 34 39 14 14 11 9 16 1200050800020 20 42 45 16 16 13 15 16 580050800025 25 52 51 19 19 13 24 16 400050800032 32 59 58 22 22 13 91 16 250050800040 40 66 67 26 26 15 140 16 150050800050 50 79 79 31 31 17 177 16 100050800063 63 96 95 38 38 19 305 16 60050800075 75 118 110 44 44 22 210 10 45050800090 90 132 125 51 51 23 345 10 30050800110 110 151 145 61 61 23 525 10 18
H
d dE
I Z I1
-
12
PVC CEMENTED FITTINGS
050900Short Reducing Bushing - Cemented
Z
D d
LI
Quality Cod Dxd L l z Weight PN Pack
U C 050900020016 20 x 16 16 14 2 3 16 4500 U 050900025016 25 x 16 19 14 5 8 16 3000 U C 050900025020 25 x 20 19 16 3 5 16 3000 U 050900032016 32 x 16 22 14 8 15 16 1800 U 050900032020 32 x 20 22 16 6 15 16 1800 U C 050900032025 32 x 25 22 19 3 10 16 1800 U 050900040020 40 x 20 26 16 10 25 16 1100 U 050900040025 40 x 25 26 23 6 27 16 1000 U C 050900040032 40 x 32 26 22 4 17 16 1000 U 050900050025 50 x 25 31 19 12 43 16 550 U 050900050032 50 x 32 31 22 9 50 16 550 U C 050900050040 50 x 40 31 26 5 32 16 600 U 050900063032 63 x 32 38 22 16 76 16 360 U 050900063040 63 x 40 38 26 12 83 16 300 U C 050900063050 63 x 50 38 34 6 60 16 300 U 050900075040 75 x 40 44 26 18 121 16 126 U 050900075050 75 x 50 44 31 13 95 16 126 U C 050900075063 75 x 63 44 38 6 80 16 126 U 050900090050 90 x 50 51 31 20 195 16 80 U 050900090063 90 x 63 51 38 13 183 16 80 U C 050900090075 90 x 75 51 44 7 141 16 80 U 050900110063 110 x 63 61 38 23 344 16 40 U 050900110075 110 x 75 61 44 17 315 16 40 U C 050900110090 110 x 90 61 51 10 265 16 40 U 050900125075 125 x 75 69 44 25 450 16 60 U 050900125090 125 x 90 69 51 18 430 16 60 U 050900125110 125 x 110 69 61 8 265 16 60
050900140090 140 x 90 76 51 25 590 16 48050900140110 140 x 110 76 61 15 447 16 48050900140125 140 x 125 76 69 7 326 16 48050900160110 160 x 110 86 61 25 775 16 30050900160125 160 x 125 86 69 17 725 16 30050900160140 160 x 140 86 76 10 560 16 36050900200160 200 x 160 106 86 20 1400 10 15050900225160 225 x 160 119 86 33 2450 10 10050900225200 225 x 200 119 106 13 1406 10 10*050900250160 250 x 160 134 87 47 2184 10 8*050900250200 250 x 200 134 107 27 2700 10 8*050900250225 250 x 225 132 120 12 2100 10 6*050900280225 280 x 225 147 120 27 3090 10 6*050900280250 280 x 250 147 132 15 2520 10 6*050900315200 315 x 200 165 107 58 8550 10 4*050900315225 315 x 225 165 132 33 8085 10 4*050900315250 315 x 250 165 132 33 4100 10 4*050900315280 315 x 280 165 149 16 4630 10 4
Quality certifications : U = UNI-IIP, C = NF-CSTB
* DELIVERY PROGRAM
-
13
PVC CEMENTED FITTINGS
05140090° Reducing TeeCemented
Z
EH
1 Z1I1
d
H
E1d1
I
Cod dxd1xd E E1 l l1 Z Z1 H H1 Weight PN Pack
051400025020 25 x 20 x 25 33 27 19 16 14 12.5 66 45 36 16 500051400032020 32 x 20 x 32 42 33 22 16 17 27.5 78 54 69 16 300051400032025 32 x 25 x 32 41 33 22 19 17 17.5 78 57 63 16 300051400040020 40 x 20 x 40 50 30 26 16 23.5 22 99 63 104 16 180051400040025 40 x 25 x 40 50 37 26 24 23.5 22 99 66 110 16 160051400040032 40 x 32 x 40 50 44 26 22 23.5 22 99 72 120 16 150051400050025 50 x 25 x 50 62 37 31 24 28 27.5 118 77 188 16 80051400050032 50 x 32 x 50 61 41 31 22 28 27.5 118 80 190 16 80051400050040 50 x 40 x 50 61 50 31 26 28 27.5 118 84 180 16 80051400063032 63 x 32 x 63 77 41 38 22 34 34.5 144 95 335 16 56051400063040 63 x 40 x 63 77 50 38 26 34 34.5 144 99 340 16 56051400063050 63 x 50 x 63 77 61 38 31 34 34.5 144 104 350 16 56
053600House Adaptor Cemented
Cod d E H L Weight PN Pack
053600012 12 12 48 10 4 16 7200053600016 16 16 58 14 8 16 3600053600020 20 20 64 16 14 16 2000053600025 25 25 75 19 26 16 1200053600032 32 30 88 22 33 16 600053600040 40 40 95 26 60 16 320053600050 50 50 102 31 120 16 200053600063 63 60 118 38 163 16 120
E
H
D
L
-
14
PVC CEMENTED FITTINGS
05450045° Elbow - Cemented
E
Z
d
I
Quality Cod d E Z l Weight PN Pack
U C K 054500016 16 23 5 14 11 16 1800 U C K 054500020 20 26 5 16 12 16 1400 U C K 054500025 25 31 6 19 20 16 850 U C K 054500032 32 39 8 22 32 16 450 U C K 054500040 40 48 10 26 63 16 250 U C K 054500050 50 59 12 31 98 16 120 U C K 054500063 63 74 15 38 210 16 80 U C K 054500075 75 91 17 44 366 16 65 U C K 054500090 90 109 21 51 567 16 35 U C 054500110 110 129 25 61 850 16 21 U 054500125 125 148 28 69 1320 16 14 U 054500140 140 163 31 76 1620 16 12 U 054500160 160 184 35 86 2180 16 6
*054500200 200 232 45 106 5000 10 3*054500225 225 258 50 119 6200 10 2*054500250 250 287 58 131.5 7680 10 2*054500280 280 320 62 147 10350 10 1*054500315 315 360 66 165 14480 10 1
Quality certifications : U= UNI-IIP, C= NF-CSTB, K = Kiwa
* DELIVERY PROGRAM
055000Flange Adaptor with O-Ring Cemented
Quality Cod d E E1 l Z B H Weight PN Pack
U 055000020 20 27 34 16 6 10 22 12 16 2000 U 055000025 25 33 41 19 6 10 25 18 16 1200 U 055000032 32 41 50 22 6 10 28 27 16 850 U 055000040 40 50 61 26 8 13 34 55 16 400 U 055000050 50 61 73 31 8 13 39 70 16 270 U 055000063 63 76 90 38 8 14 46 120 16 160 U 055000075 75 88 106 44 8 15 53 175 16 135 U 055000090 90 105 125 51 10 16 61 270 16 75 U 055000110 110 126 150 61 11 18 72 420 16 48 U 055000125 125 146 169 69 11 17 80 670 16 40 U 055000140 140 163 188 76 12 18 88 860 16 21 U 055000160 160 185 213 86 12 19 98 1140 16 16
055000200 200 228 254 106 13 23 119 1300 10 8055000225 225 249 272 119 14 25 133 1500 10 6
Quality certifications : U = UNI-IIP
-
15
PVC CEMENTED FITTINGS
055100Stub Flat Face to fit 055000Cemented
Quality Cod d E E1 l Z B H Weight PN Pack
U 055100020 20 27 34 16 3 7 19 10 16 2000 U 055100025 25 33 41 19 3 7 22 16 16 1200 U 055100032 32 41 50 22 3 7 25 25 16 850 U 055100040 40 50 61 26 3 8 29 40 16 400 U 055100050 50 61 73 31 3 8 34 60 16 270 U 055100063 63 76 90 38 3 9 41 100 16 160 U 055100075 75 88 106 44 4 10 48 150 16 135 U 055100090 90 105 125 51 5 11 56 240 16 75 U 055100110 110 126 150 61 5 12 66 370 16 48 U 055100125 125 146 169 69 5 11 74 585 16 40 U 055100140 140 163 188 76 6 12 82 735 16 21 U 055100160 160 185 213 86 6 13 92 1000 16 16
055100200 200 228 254 106 7 17 113 1655 10 8055100225 225 249 272 119 8 18 126 1805 10 6
Quality certifications : U = UNI-IIP
055200Stub Serrated Cemented E E1
H
d
B
ZI
Quality Cod d E E1 l Z B H Weight PN Pack
U 055200020 20 27 34 16 3 7 19 10 16 2000 U 055200025 25 33 41 19 3 7 22 16 16 1200 U 055200032 32 41 50 22 3 7 25 25 16 850 U 055200040 40 50 61 26 3 8 29 40 16 400 U 055200050 50 61 73 31 3 8 34 60 16 270 U 055200063 63 76 90 38 3 9 41 100 16 160 U 055200075 75 88 106 44 4 10 48 150 16 135 U 055200090 90 105 125 51 5 11 56 240 16 75 U 055200110 110 126 150 61 5 12 66 380 16 48 U 055200125 125 146 169 69 5 11 74 590 16 40 U 055200140 140 163 188 76 6 12 82 735 16 21 U 055200160 160 185 213 86 6 13 92 1000 16 16
055200200 200 228 254 106 7 19 114 1677 10 8055200225 225 249 272 119 8 18 126 1810 10 6*055200250 250 273 307 131 10 20 131 2320 10 4*055200280 280 308 329 142 10 23 142 3036 10 5*055200315 315 346 379 161 11 27 161 4578 10 3
Quality certifications : U = UNI-IIP
* DELIVERY PROGRAM
-
16
PVC CEMENTED FITTINGS
059000Loose Flange
Quality Cod d E E1 H Dp S N Weight PN Pack
059000020 20 25 95 12 65 14 4 85 16 450 059000025 25 32 105 12 75 14 4 120 16 400 U 059000032 32 44 115 14 85 14 4 130 16 180 U 059000040 40 54 140 15 100 18 4 205 16 100 U 059000050 50 65 150 16 110 18 4 235 16 80 U 059000063 63 80 165 18 125 18 4 300 16 75 U 059000075 75 94 185 19 145 18 4 390 16 50 U 059000090 90 112 200 20 160 18 8 460 16 40 U 059000110 110 135 220 22 180 18 8 540 16 30 U 059000125 125 151 230 25 191 18 8 585 16 30 U 059000140 140 164 250 28 211 18 8 746 16 20 U 059000160 160 193 289 30 241 22 8 1050 16 26
059000200 200 233 340 32 297 22 8 1402 10 12059000225 225 243 340 32 295 22 8 1249 10 12*059000250 250 280 395 34 350 34 12 1680 10 8*059000280 280 310 395 30 350 30 12 2000 10 8*059000315 315 349 445 31 400 31 12 2700 10 8
E E1
H
Dp
S
Quality certifications : U = UNI-IIP
* DELIVERY PROGRAM
059100Blind Flange
E
H
Dp
S
Cod d E H Dp S N Weight PN Pack
059100032 32 115 14 85 14 4 143 16 100059100040 40 140 15 100 18 4 240 16 100059100050 50 150 16 110 18 4 286 16 80059100063 63 165 18 125 18 4 390 16 75059100075 75 185 19 145 18 4 490 16 50059100090 90 200 20 160 18 8 640 16 40059100110 110 220 22 180 18 8 786 16 30059100125 125 230 25 191 18 8 848 16 25059100140 140 250 28 211 18 8 1125 16 20059100160 160 289 30 241 22 8 1743 16 15059100200 200 340 32 297 22 8 2700 10 12059100225 225 340 32 297 22 8 2950 10 12
-
17
PVC CEMENTED FITTINGS
059200Fixed Flange
Quality Cod d I E H Dp S N Z Weight PN Pack
U 059200032 32 22 115 23 85 14 4 3 140 16 144 U 059200040 40 26 140 27 100 18 4 3 240 16 70 U 059200050 50 31 150 32 110 18 4 3 290 16 60 U 059200063 63 38 165 39 125 18 4 3 400 16 45 U 059200075 75 44 185 47 145 18 4 4 540 16 25 U 059200090 90 51 200 54 160 18 8 5 710 16 18 U 059200110 110 61 220 64 180 18 8 6 940 16 12
E
H
ZDp
S
d I
Quality certifications : U = UNI-IIP
-
18
PVC ADAPTOR FITTINGS
050102Socket AdaptorCemented Threaded
H
Lt
G C
B
Z
d
I
Cod dxG C B l Lt Z H Weight PN Pack
050102016003 16 x 3/8” 25 12 14 13 3 30 10 16 2300050102020005 20 x 1/2” 30 12 16 17 3 36 18 16 1400050102025007 25 x 3/4” 40 12 19 18 3 40 27 16 900050102032010 32 x 1” 45 12 22 20 3 45 42 16 500050102040013 40 x 1.1/4” 51 16 26 22 4 52 50 16 300050102050015 50 x 1.1/2” 63 16 31 22 4 57 100 16 200050102063020 63 x 2” 80 16 38 26 4 68 150 16 100050102075025 75 x 2.1/2” 90 20 44 29 5 78 190 16 60050102090030 90 x 3” 108 24 51 33 5 89 333 16 60050102110040 110 x 4” 130 28 61 40 5 106 483 16 32
Cod DxdxG C B L Lt H Weight PN Pack
050202025005 25 x 20 x 1/2” 30 12 19 17 46 19 16 1200050202032007 32 x 25 x 3/4” 36 12 22 18 50 30 16 700050202040010 40 x 32 x 1” 47 16 26 20 63 60 16 350050202050013 50 x 40 x 1.1/4” 65 16 31 22 68 111 16 200050202063013 63 x 50 x 1.1/4” 65 16 38 22 75 135 16 150050202063015 63 x 50 x 1.1/2” 65 16 38 22 75 135 16 150050202075020 75 x 63 x 2” 80 20 44 26 83 180 16 120050202090025 90 x 75 x 2.1/2” 95 20 51 29 94 268 16 80050202110030 110 x 90 x 3” 120 20 61 33 106 468 16 50
050202Reducer AdaptorMale - Female Cemented Threaded
050302Adaptor SocketMale - FemaleCemented Threaded
B
L
Gd C
H
Lt
Cod dxG C B L Lt H Weight PN Pack
050302020005 20 x 1/2” 30 12 16 12 40 15 16 1000050302025007 25 x 3/4” 30 12 19 18 46 24 16 700050302032010 32 x 1” 36 12 22 20 51 46 16 500050302040013 40 x 1.1/4” 50 16 26 22 61 61 16 300050302050015 50 x 1.1/2” 65 16 31 22 64 118 16 200050302063020 63 x 2” 65 16 38 26 73 148 16 100050302075025 75 x 2.1/2” 80 20 44 29 87 180 16 90050302090030 90 x 3” 95 20 51 33 97 328 16 50050302110040 110 x 4” 120 20 61 40 112 478 16 30
-
19
PVC ADAPTOR FITTINGS
05040290° TeeCemented Threaded
Lt
H
GE
Z
d E
I
Cod dxGxd E l Lt Z H Weight PN Pack
050402016003 16 x 3/8” 22 14 13 9 46 16 16 1440050402020005 20 x 1/2” 27 16 17 11 55 24 16 700050402025007 25 x 3/4” 33 19 18 14 65 39 16 500050402032010 32 x 1” 41 22 20 17 78 70 16 250050402040013 40 x 1.1/4” 48 26 22 21 98 121 16 130050402050015 50 x 1.1/2” 62 31 22 26 118 205 16 80050402063020 63 x 2” 73 38 26 33 145 400 16 56050402075025 75 x 2.1/2” 90 44 29 40 170 620 16 35050402090030 90 x 3” 108 51 33 48 199 1006 16 24050402110040 110 x 4” 132 61 40 58 229 1620 16 14
05050290° ElbowCemented Threaded
Cod dxG E l Lt Z H Weight PN Pack
050502016003 16 x 3/8” 23 14 13 9 34 10 16 2000050502020005 20 x 1/2” 20 16 17 11 41 15 16 1000050502025007 25 x 3/4” 30 19 18 14 49 25 16 600050502032010 32 x 1” 38 22 20 17 60 45 16 350050502040013 40 x 1.1/4” 48 26 22 21 74 70 16 200050502050015 50 x 1.1/2” 62 31 22 26 90 165 16 130050502063020 63 x 2” 73 38 26 33 111 315 16 60050502075025 75 x 2.1/2” 90 44 29 40 130 469 16 50050502090030 90 x 3” 108 51 33 47 154 775 16 32050502110040 110 x 4” 132 61 40 57 186 1230 16 17
HEd
G
ZI
E
Lt
050602AdaptorMale - Female Cemented - Male Threaded
Cod DxdxR C B l L Lt H Weight PN Pack
050602016003 16 x 12 x 3/8” 22 12 12 14 11 37 10 16 2700050602020005 20 x 16 x 1/2” 24 12 14 16 16 44 18 16 2000050602025007 25 x 20 x 3/4” 30 12 16 19 17 48 27 16 1200050602032010 32 x 25 x 1” 36 12 19 22 19 55 29 16 700050602040013 40 x 32 x 1.1/4” 46 16 22 26 22 64 64 16 400050602050015 50 x 40 x 1.1/2” 50 16 26 31 22 69 103 16 220050602063020 63 x 50 x 2” 65 16 31 38 26 80 167 16 140050602075025 75 x 63 x 2.1/2” 76 12 38 44 29 85 158 16 125050602090030 90 x 75 x 3” 95 20 44 51 33 104 329 16 75050602110040 110 x 90 x 4” 120 20 51 61 41 122 483 16 32
B
CR
H
Lt
D d
LI
-
20
PVC ADAPTOR FITTINGS
050802Union AdaptorFemale - CementedThreaded
Cod dxG E l Lt Z H Weight PN Pack
050802016003 16 x 3/8” 34 14 13 13 39 22 16 1000050802020005 20 x 1/2” 42 16 17 12 46 39 16 580050802025007 25 x 3/4” 52 19 18 15 51 63 16 400050802032010 32 x 1” 59 22 20 17 57 87 16 250050802040013 40 x 1.1/4” 72 26 24 16 66 140 16 150050802050015 50 x 1.1/2” 79 31 24 17 72 190 16 100050802063020 63 x 2” 96 38 34 20 92 334 16 60050802075025 75 x 2.1/2” 118 44 29 50 110 566 10 45050802090030 90 x 3” 132 51 33 59 125 730 10 30050802110040 110 x 4” 151 61 40 63 145 1213 10 18
H
d GE
Lt Z Lt
052102AdaptorMale - Female - CementedMale - Threaded
Cod DxdxR C B l L Lt H Weight PN Pack
052102016003 20 x 16 x 3/8” 22 12 14 16 11 40 10 16 2500052102020005 25 x 20 x 1/2” 30 12 16 19 16 47 17 16 1300052102025007 32 x 25 x 3/4” 36 12 19 22 17 51 27 16 800052102032010 40 x 32 x 1” 46,5 16 22 26 19 62 53 16 450052102040013 50 x 40 x 1.1/4” 50 16 26 31 22 70 70 16 250052102050015 63 x 50 x 1.1/2” 65 16 31 38 22 76 140 16 170052102063020 75 x 63 x 2” 76 12 38 44 26 82 158 16 120052102075025 90 x 75 x 2.1/2” 95 20 44 51 30 101 310 16 60052102090030 110 x 90 x 3” 120 20 51 61 33 114 550 16 50052102110040 125 x 110 x 4” 130 20 61 69 41 130 590 16 30
B
CRH
Lt
D d
LI
052202Bushing AdaptorMale - Female - CementedMale - Threaded
Cod DxdxR C B l L L1 H Weight PN Pack
052202020003 25 x 20 x 3/8” 30 12 16 19 11 42 15 16 1400052202025005 32 x 25 x 1/2” 36 12 19 22 16 50 25 16 900052202032007 40 x 32 x 3/4” 46 16 22 26 17 59 51 16 450052202040010 50 x 40 x 1” 50 16 26 31 19 66 97 16 200052202050013 63 x 50 x 1.1/4” 65 16 31 38 22 76 135 16 170052202063015 75 x 63 x 1.1/2” 76 12 38 44 22 78 153 16 154052202075020 90 x 75 x 2” 95 20 44 51 26 97 285 16 60052202090025 110 x 90 x 2.1/2” 120 20 51 61 30 111 528 16 50052202110030 125 x 110 x 3” 130 20 61 69 33 122 545 16 42
B
CR
H
Lt
D d
LI
-
21
PVC ADAPTOR FITTINGS
053602House AdaptorWith Threaded Nut
Cod GxE E H Weight PN Pack
053602016007 3/4” x 16 16 67 21 10 1000053602020010 1” x 20 20 72 32 10 700053602025013 1.1/4” x 25 25 80 54 10 400053602030015 1.1/2” x 30 30 91 69 10 250053602040020 2” x 40 40 97 124 10 150053602050023 2.1/4” x 50 50 104 186 10 120053602060027 2.3/4” x 60 60 118 260 10 70
E
H
G
05450245° ElbowCemented - Threaded
Cod dxG E Z l Weight PN Pack
054502016003 16 x 3/8” 23 5 14 13 16 1800054502020005 20 x 1/2” 26 5 16 15 16 1400054502025007 25 x 3/4” 31 6 19 24 16 850054502032010 32 x 1” 39 8 22 42 16 450054502040013 40 x 1.1/4” 48 10 26 70 16 250054502050015 50 x 1.1/2” 59 12 31 121 16 120054502063020 63 x 2” 74 15 38 230 16 80
E
ZG
I
d
05140290° Reducing TeeCemented - Threaded
Cod dxGxd E E1 l l1 Z Z1 H H1 Weight PN Pack
051402025005 25 x 1/2” x 25 33 27 19 16 14 12.5 66 45 36 16 500051402032005 32 x 1/2” x 32 42 33 22 16 17 27.5 78 54 69 16 300051402032007 32 x 3/4” x 32 41 33 22 19 17 17.5 78 57 63 16 300051402040005 40 x 1/2” x 40 50 30 26 16 23.5 22 99 63 104 16 180051402040007 40 x 3/4” x 40 50 37 26 24 23.5 22 99 66 110 16 160051402040010 40 x 1” x 40 50 44 26 22 23.5 22 99 72 120 16 150051402050007 50 x 3/4” x 50 62 37 31 24 28 27.5 118 77 188 16 80051402050010 50 x 1” x 50 61 41 31 22 28 27.5 118 80 190 16 80051402050013 50 x 1.1/4” x 50 61 50 31 26 28 27.5 118 84 180 16 80051402063010 63 x 1” x 63 77 41 38 22 34 34.5 144 95 335 16 56051402063013 63 x 1.1/4 x 63 77 50 38 26 34 34.5 144 99 340 16 56051402063015 63 x 1.1/2” x 63 77 61 38 31 34 34.5 144 104 350 16 56
-
22
PVC ADAPTOR FITTINGS
057102Socket AdaptorCemented - Threadedwith Reinforcing Ring
Cod dxG C B l Lt Z H Weight PN Pack
057102016003 16 x 3/8” 25 12 14 13 3 30 10 16 2300057102020005 20 x 1/2” 30 12 16 17 3 36 18 16 1400057102025007 25 x 3/4” 40 12 19 18 3 40 27 16 900057102032010 32 x 1” 45 12 22 20 3 45 42 16 500057102040013 40 x 1.1/4” 51 16 26 22 4 52 50 16 300057102050015 50 x 1.1/2” 63 16 31 22 4 57 100 16 200057102063020 63 x 2” 80 16 38 26 4 68 150 16 100
057202Reduder Adaptorwith Reinforcing RingMale - Cemented Female - Threaded
Cod DxdxG C B L Lt H Weight PN Pack
057202025005 25 x 20 x 1/2” 30 12 19 17 46 19 16 1200057202032007 32 x 25 x 3/4” 36 12 22 18 50 30 16 700057202040010 40 x 32 x 1” 47 16 26 20 63 60 16 350057202050013 50 x 40 x 1.1/4” 65 16 31 22 68 111 16 200057202063013 63 x 50 x 1.1/4” 65 16 38 22 75 135 16 150057202063015 63 x 50 x 1.1/2” 65 16 38 22 75 135 16 150
-
23
PVC ADAPTOR FITTINGS
05740290° Tee with Reinforcing RingCemented - Threaded
Cod dxGxd E l Lt Z H Weight PN Pack
057402016003 16 x 3/8” 22 14 13 9 46 16 16 1440057402020005 20 x 1/2” 27 16 17 11 55 24 16 700057402025007 25 x 3/4” 33 19 18 14 65 39 16 500057402032010 32 x 1” 41 22 20 17 78 70 16 250057402040013 40 x 1.1/4” 48 26 22 21 98 121 16 130057402050015 50 x 1.1/2” 62 31 22 26 118 205 16 80057402063020 63 x 2” 73 38 26 33 145 400 16 56
05750290° Elbow with Reinforcing RingCemented - Threaded
Cod dxG E l Lt Z H Weight PN Pack
057502016003 16 x 3/8” 23 14 13 9 34 10 16 2000057502020005 20 x 1/2” 20 16 17 11 41 15 16 1000057502025007 25 x 3/4” 30 19 18 14 49 25 16 600057502032010 32 x 1” 38 22 20 17 60 45 16 350057502040013 40 x 1.1/4” 48 26 22 21 74 70 16 200057502050015 50 x 1.1/2” 62 31 22 26 90 165 16 130057502063020 63 x 2” 73 38 26 33 111 315 16 60
-
24
PVC ADAPTOR FITTINGS
058100Metal Pipe & TapConnectors, with EPDM gaskets and PVC Socket x brass nuts Female - Threaded
058900Metal Pipe & TapConnectors, with EPDM gaskets and PVC Spigot x brass nuts Female - Threaded
Cod D di G E e Z B L Di K C 5629 h Weight PN Pack
05890025010 25 20 1” 18,5 17 24 42,5 54 17 36 20 30 x 21 x 2 9,5 74 10 31005890032013 32 25 1¼” 22 20 25,5 48 60 20 45 22 38 x 27 x 2 10,5 120 10 20005890040015 40 32 1½” 27 22,5 28,5 55 69 29 52 24 44 x 32 x 2 12 166 10 14005890050020 50 40 2” 32 27 30 62 77 35 64 26 62 x 46 x 2 13 250 10 95
Cod A D G E Z B L Di K C 5629 h Weight PN Pack
058100025010 30 25 1” 19 46 65 76,5 17 37 20 30 x 21 x 2 9,5 86 10 250058100032013 38 32 1¼” 22 51,5 73,5 86 20 46 22 38 x 27 x 2 10,5 140 10 150058100040015 48 40 1½” 27 58 85 100 29 53 24 44 x 32 x 2 12,5 211 10 100
D
Z E
Di
K di
h
C
5629 e
LB
G
A
ZB
GK
5629h
C Di
E
D
L
-
25
PVC ADAPTOR FITTINGS
058901Metal Pipe & TapConnectors, with EPDM gaskets and PVC Spigot x brass nuts Female - Threaded
058200Metal Pipe & TapConnectors, with EPDM gaskets and PVC Socket x brass nuts Female - Threaded
Cod A D G E Z B L Di K C 5629 h Weight PN Pack
058200025007 32 25 ¾” 19 47 66 77 14 30 18 24 x 16 x 2 8 66 10 300058200032010 40 32 1” 22 50 72 82,5 17 37 20 30 x 21 x 2 9,5 100 10 200058200040013 50 40 1¼” 26 65 91 103,5 20,5 46 22 38 x 27 x 2 11 174 10 130058200050015 63 50 1½” 31 78 109 122 29 53 24 44 x 32 x 2 12 266 10 75058200063020 75 63 2” 39 85 124 138,5 35 64 26 62 x 46 x 2 13 394 10 50
Cod D di G E e Z B L Di K C 5629 h Weight PN Pack
058901025007 25 20 ¾” 19 16 24 43 54,5 17 30 20 30 x 21 x 2 9,5 124 10 180058901032010 32 25 1” 22 19 25,5 48 60 20,5 45 22 38 x 27 x 2 10,5 224 10 110058901040013 40 32 1¼” 26 22 28 55 63 29 53 24 44 x 32 x 2 12 276 10 90
Z EB
h
L
ADGK
C Di
5629
di D
Di
E
K
Zh
c
5629
G
e
LB
-
26
PVC THREADED FITTINGS
Cod G C B Lt Z H Weight PN Pack050101003 3/8” 25 12 13 4 30 10 16 2300050101005 1/2” 30 12 17 2 36 16 16 1400050101007 3/4” 40 12 18 4 40 28 16 900050101010 1” 45 12 20 5 45 39 16 500050101013 1.1/4” 51 16 22 8 52 55 16 300050101015 1.1/2” 63 16 22 13 57 112 16 200050101020 2” 80 16 26 16 68 166 16 100050101025 2.1/2” 90 20 29 20 78 200 16 60050101030 3” 108 24 33 23 89 310 16 60050101040 4” 130 28 40 26 106 450 16 32
050101Socket - Threaded
H
Lt
G C
B
Z
050103Socket - ThreadedFemale - Female
Cod GxG1 C B l Lt Z H Weight PN Pack
050103007005 1/2” x 3/4” 40 12 13 14 3 38,3 27 16 600050103010007 1” x 3/4” 45 12 14 17 3 42,21 37 16 500
-
27
PVC THREADED FITTINGS
050201ReducerMale - Female - Threaded
B
G
RC
H
Lt Lt1
Cod RXG C B Lt Lt1 H Weight PN Pack
050201005003 1/2” x 3/8” 30 12 13 17 40 17 16 1600050201007003 3/4” x 3/8” 36 12 13 18 41 18 16 1400050201007005 3/4” x 1/2” 36 12 17 18 45 21 16 1100050201010003 1” x 3/8” 40 10 11 19 41 20 16 900050201010005 1” x 1/2” 40 12 22 11 46 33 16 900050201010007 1” x 3/4” 36 12 18 20 48 30 16 800050201013005 1.1/4” x 1/2” 46 16 17 22 53 52 16 450050201013007 1.1/4” x 3/4” 46 16 18 22 54 52 16 450050201013010 1.1/4” x 1” 55 16 24 22 58 71 16 350050201015005 1.1/2” x 1/2” 50 16 22 15 52 59 16 340050201015007 1.1/2” x 3/4” 50 16 18 22 54 61 16 340050201015010 11/2” x 1” 50 16 20 22 59 99 16 340050201015013 1.1/2” x 1.1/4” 55 16 23 24 58 74 16 300050201020007 2” x 3/4” 70 18 16 26 60 80 16 200050201020010 2” x 1” 65 16 20 26 62 105 16 200050201020013 2” x 1.1/4” 65 16 22 26 63 109 16 200050201020015 2” x 1.1/2” 65 16 22 26 63 109 16 200050201025015 2.1/2” x 1.1/2” 80 20 22 29 66 163 16 168050201025020 2.1/2” x 2” 80 20 26 29 68 170 16 80050201030020 3” x 2” 95 20 34 19 72 245 16 120050201030025 3” x 2.1/2” 95 20 29 33 76 254 16 110050201040025 4” x 2.1/2” 120 20 29 40 87 400 16 57050201040030 4” x 3” 120 20 42 25 86 406 16 57
05040190° Tee - Threaded
Cod G E Lt H Weight PN Pack
050401003 3/8” 22 13 46 16 16 1500050401005 1/2” 28 17 55 29 16 700050401007 3/4” 33 18 65 40 16 500050401010 1” 42 24 78 77 16 250050401013 1.1/4” 48 22 98 120 16 130050401015 1.1/2” 62 22 118 240 16 80050401020 2” 73 26 145 480 16 56050401025 2.1/2” 90 29 170 644 16 35050401030 3” 108 33 199 1100 16 24050401040 4” 132 40 239 1625 16 14
Lt
H
G
E
-
28
PVC THREADED FITTINGS
05050190° Elbow - Threaded
Cod G E Lt H Weight PN Pack
050501003 3/8” 23 13 35 10 16 1800050501005 1/2” 20 17 42 15 16 1000050501007 3/4” 30 18 50 25 16 600050501010 1” 38 20 60 45 16 350050501013 1.1/4” 48 22 75 90 16 200050501015 1.1/2” 62 22 90 180 16 130050501020 2” 73 26 111 355 16 60050501025 2.1/2” 90 29 130 508 16 50050501030 3” 108 33 154 861 16 30050501040 4” 132 40 186 1225 16 17
H
G E
Lt
050601Nipple - Threaded
Cod R C B Lt H Weight PN Pack
050601003 3/8” 22 12 11 35 10 16 2800050601005 1/2” 24 12 16 45 13 16 2000050601007 3/4” 30 12 17 47 20 16 1300050601010 1” 36 12 19 51 30 16 700050601013 1.1/4” 46 16 22 60 56 16 400050601015 1.1/2” 50 16 22 60 65 16 300050601020 2” 65 16 26 68 107 16 150050601025 2.1/2” 80 20 30 80 190 16 96050601030 3” 95 20 33 87 268 16 85050601040 4” 120 20 41 102 520 16 42
B
H
R C
Lt
050701Cap - Threaded
Cod G C B Lt H Weight PN Pack
050701003 3/8” 25 12 16 25 10 16 2600050701005 1/2” 30 12 19 27 16 16 1400050701007 3/4” 40 12 18 30 26 16 1100050701010 1” 45 12 22 32 30 16 530050701013 1.1/4” 52 12 22 33 42 16 300050701015 1.1/2” 58 12 24 38 62 16 300050701020 2” 75 12 22 45 117 16 160050701025 2.1/2” 95 20 32 51 205 16 70050701030 3” 110 20 32 51 274 16 80050701040 4” 130 20 35 63 453 16 56
H
B
G C
Lt
-
29
PVC THREADED FITTINGS
050801Union FemaleThreaded
Cod G E Lt Z H Weight PN Pack
050801003 3/8” 34 13 13 39 22 16 1000050801005 1/2” 42 17 12 46 49 16 580050801007 3/4” 52 18 15 51 65 16 400050801010 1” 59 20 17 57 90 16 250050801013 1.1/4” 72 24 18 66 140 16 150050801015 1.1/2” 79 24 24 72 190 16 100050801020 2” 96 34 24 92 350 16 60050801025 2.1/2” 118 30 50 110 570 10 45050801030 3” 132 33 59 125 740 10 30050801040 4” 151 41 63 145 1220 10 18
H
G GE
Lt Z Lt
050804Union Male - FemaleThreaded
Cod GxR Lt Lt1 E H C B Weight PN Pack
050804007 3/4” x 3/4” 17 19 51 66 40 12 79 16 350050804010 1” x 1” 22 22 58 73 45 13 109 16 250050804013 1.1/4” x 1.1/4” 22 22 72 67 46 16 135 16 150050804015 1.1/2” x 1.1/2” 22 22 79 79 50 16 180 16 100050804020 2” x 2” 26 26 96 93 65 16 310 16 60
H
G R CE
Lt1
B Lt
050803Union Male - FemaleCemented - Threaded
H
d R CE
Lt1
B Lt
Cod dxR Lt Lt1 E H C B Weight PN Pack
050803025007 25 x 3/4” 17 19 51 66 40 12 79 16 350050803032010 32 x 1” 22 22 58 73 45 13 109 16 250050803040013 40 x 1.1/4” 25 22 72 90 55 16 187 16 150050803050015 50 x 1.1/2” 22 31 79 79 50 16 180 16 100050803063020 63 x 2” 26 38 96 93 65 16 310 16 60
-
30
PVC THREADED FITTINGS
051601Reducing NippleThreaded
Cod RxR1 C B Lt Lt1 H Weight PN Pack
051601005003 1/2” x 3/8” 24 12 16 11 39 11 16 2200051601007003 3/4” x 3/8” 30 12 17 16 45 18 16 1400051601007005 3/4” x 1/2” 30 12 17 11 40 17 16 1300051601010005 1” x 1/2” 38 12 19 17 46 27 16 900051601010007 1” x 3/4” 36 12 19 16 45 26 16 800051601013007 1.1/4” x 3/4” 50 16 22 19 57 57 16 400051601013010 1.1/4 x 1” 50 16 22 17 55 54 16 350051601015010 1.1/2” x 1” 50 16 22 22 56 59 16 350051601015013 1.1/2” x 1.1/4” 50 16 22 22 60 60 16 300051601020013 2” x 1.1/4” 65 16 26 22 64 104 16 200051601020015 2” x 1.1/2” 65 16 26 22 64 97 16 180051601025015 2.1/2” x 1.1/2” 80 20 30 22 72 170 16 164051601025020 2.1/2” x 2” 80 20 30 26 76 176 16 164051601030020 3” x 2” 90 20 33 30 83 265 16 75051601030025 3” x 2.1/2” 90 20 33 26 79 251 16 70051601040025 4” x 2.1/2” 120 20 41 33 94 435 16 70051601040030 4” x 3” 120 20 41 30 91 422 16 70
B
R CR1
H
Lt Lt1
-
31
PVC THREADED FITTINGS
051701Plug - Threaded
Cod R C B Lt H Weight PN Pack
051701003 3/8” 22 12 13 25 7 16 3000051701005 1/2” 24 12 17 30 12 16 2500051701007 3/4” 30 12 18 32 16 16 1500051701010 1” 36 12 20 35 24 16 1100051701013 1.1/4” 46 16 22 43 47 16 500051701015 1.1/2” 51 16 22 44 57 16 480051701020 2” 65 16 26 48 97 16 250051701025 2.1/2” 80 20 30 56 160 16 82051701030 3” 95 20 33 61 263 16 70051701040 4” 120 20 40 71 425 16 72
H
B
R C
Lt
053601House AdaptorThreaded
Cod RxE C B Lt H Weight PN Pack
053601012004 1/4” x 12 16 12 11 49 6 16 5600053601016003 3/8” x 16 22 12 13 58 12 16 2200053601020005 1/2” x 20 26 12 16 64 18 16 1600053601025007 3/4” x 25 30 12 17 72 30 16 1000053601030010 1” x 30 36 16 19 84 38 16 560053601040013 1.1/4” x 40 46 16 22 91 70 16 280053601050015 1.1/2” x 50 50 16 22 94 107 16 200053601060020 2” x 60 65 16 26 118 150 16 120
E
H
RC
BLt
052201Nipple SocketMale - Female - Threaded
Cod RxG C B Lt Lt1 H Weight PN Pack
052201003005 3/8” x 1/2” 30 12 17 11 40 18 16 1100052201005007 1/2” x 3/4” 36 12 18 16 44 25 16 900052201007010 3/4” x 1” 46 16 20 17 45 40 16 600052201010013 1” x 1.1/4” 55 16 22 18 57 68 16 300052201013015 1.1/4” x 1.1/2” 65 16 24 20 61 109 16 250052201015020 1.1/2” x 2” 80 16 26 24 66 169 16 150052201015025 1.1/2” x 2.1/2” 80 20 29 22 65 200 16 170052201020025 2” x 2.1/2” 95 20 29 26 69 210 16 170052201020030 2” x 3” 95 20 33 26 70 320 16 85052201025030 2.1/2” x 3” 120 20 33 30 74 340 16 70052201025040 2.1/2” x 4” 120 20 40 30 82 410 16 70052201030040 3” x 4” 130 20 40 33 87 430 16 70
B
C R G
H
Lt Lt1
-
32
05450145° ElbowThreaded
Cod G E Z Lt Weight PN Pack
054501005 1/2” 26 5 17 15 16 1400054501007 3/4” 31 6 18 24 16 850054501010 1” 39 8 20 42 16 450054501013 1.1/4” 48 10 22 70 16 250054501015 1.1/2” 59 12 22 121 16 120054501020 2” 74 15 26 230 16 80
E
Z
G
Lt
PVC THREADED FITTINGS
059201Fixed FlangeThreaded
Cod G Lt E H Dp S N Z Weight PN Pack
059201010 1” 20 115 23 85 14 4 3 148 16 144059201013 1.1/4” 22 140 27 100 18 4 5 225 16 70059201015 1.1/2” 22 150 32 110 18 4 10 276 16 60059201020 2” 26 165 39 125 18 4 13 380 16 45059201025 2.1/2” 29 185 47 145 18 4 18 659 16 25059201030 3” 33 200 54 160 18 8 21 670 16 18059201040 4” 40 220 64 180 18 8 24 900 16 12
E
H
Lt
Dp
S
G
Z
-
33
PVC FITTINGS ACCESSORIES
054800Nut for Unions: 050800, 050801, 050802, 050803, 050804, 053602
Cod d G E E1 H Weight PN
054800016 16 3/4” 22 34 20 10 16054800020 20 1” 27 42 23 18 16054800025 25 1.1/4” 36 52 25 27 16054800032 32 1.1/2” 41 59 27 35 16054800040 40 2” 53 72 30 53 16054800050 50 2.1/4” 57 79 34 70 16054800063 63 2.3/4” 74 96 38 110 16054800075 75 3.1/2” 93 118 46 190 10054800090 90 4” 107 132 53 250 10054800110 110 5” 125 151 59 430 10
E
H
E1G
055800Bushimg for Union: 050800
d
H
R
IZ
Cod d R l Z H Weight PN
055800016 16 3/4” 14 9 23 10 16055800020 20 1” 16 10 26 14 16055800025 25 1.1/4” 19 10 29 20 16055800032 32 1.1/2” 22 10 32 34 16055800040 40 2” 26 12 38 61 16055800050 50 2.1/4” 31 14 45 81 16055800063 63 2.3/4” 38 14 52 132 16055800075 75 3.1/2” 44 18 62 205 10055800090 90 4” 51 18 69 296 10055800110 110 5” 61 18 79 473 10
055801Bushimg for Unions: 050801, 050802
G
H
R
LtZ
Cod G R Lt Z H PN Weight
055801003 3/8” 3/4” 13 9 23 16 10055801005 1/2” 1” 17 10 26 16 17055801007 3/4” 1.1/4” 18 11 29 16 24055801010 1” 1.1/2” 20 12 32 16 34055801013 1.1/4” 2” 22 16 38 16 65055801015 1.1/2” 2.1/4” 22 23 45 16 95055801020 2” 2.3/4” 26 26 52 16 170055801025 2.1/2” 3.1/2” 29 33 62 10 241055801030 3” 4” 33 36 69 10 300055801040 4” 5” 40 39 79 10 475
-
34
056800End for Unions: 050800, 050802, 050803
E
H
dZI
Cod d l Z E H Weight PN
05680016 16 14 2 24 16 10 1605680020 20 16 3 30 19 14 1605680025 25 19 3 39 22 20 1605680032 32 22 3 44 25 34 1605680040 40 26 3 55 29 61 1605680050 50 31 3 62 34 81 1605680063 63 38 3 78 41 132 1605680075 75 44 4 97 48 205 1005680090 90 51 5 110 56 296 1005680110 110 61 5 135 66 473 10
PVC FITTINGS ACCESSORIES
055803Mail Threaded Union bush for items 050803, 050804
CR1 R
LtB
Cod R R1 Lt C B Weight PN
055803007 3/4” 1.1/4” 17 40 12 20 16055803010 1” 1.1/2” 22 45 13 34 16055803013 1.1/4” 2” 22 46 16 61 16055803015 1.1/2” 2.1/4” 22 50 16 81 16055803020 2” 2.3/4” 26 65 16 132 16
056810End for Unions: 050801, 050804
Cod G Lt Z E H Weight PN
05681003 3/8” 13 3 24 16 5 1605681005 1/2” 17 3 30 20 10 1605681007 3/4” 18 4 39 22 16 1605681010 1” 20 5 44 25 23 1605681018 1.1/4” 22 7 55 29 36 1605681015 1.1/2” 22 12 62 34 60 1605681020 2” 26 15 78 41 105 1605681025 2.1/2” 29 19 97 48 135 1005681030 3” 33 23 110 56 180 1005681040 4” 40 26 135 66 310 10
-
35
056090O-Ring for Item055000
s
d
Cod d d s
05609025 16 - 3/8” 28,17 3,5305609032 20 - 1/2” 36,1 3,5305609040 25 - 3/4” 40,65 5,3405609050 32 - 1” 50,16 5,3405609063 40 - 1.1/4” 66,04 5,34
6325 50 - 1.1/2” 81,92 5,3405609090 63 - 2” 100,97 5,3405609110 75 - 2.1/2” 116,84 6,9905609125 90 - 3” 135,9 6,9905609140 110 - 4” 151,77 6,9905609160 63 - 2” 177,17 6,9905609200 110 - 4” 215,27 6,9905609225 63 - 2” 240,67 6,99
056290Seal for:055200, 053602
Cod ø d D e
05629016 16 17 24 205629020 20 21 30 205629025 25 27 38 205629032 32 32 44 205629040 40 42 55 205629050 50 46 62 205629063 63 63 88 205629075 75 75 104 205629090 90 90 123 205629110 110 110 148 305629125 125 125 166 305629140 140 140 186 305629160 160 160 211 305629200 200 200 245 305629225 225 225 270 3
e
d
D
PVC FITTINGS ACCESSORIES
-
36
056390O-Ring for Unions050800, 050801, 050802, 050803, 050804
s
d
Cod d d s
05639016 16 - 3/8” 16 2.6205639020 20 - 1/2” 19 3.5305639025 25 - 3/4” 27 3.5305639032 32 - 1” 30 3.5305639040 40 - 1.1/4” 44 3.5305639050 50 - 1.1/2” 50 3.5305639063 63 - 2” 59.7 5.34
*05630063 63 - 2” 60 3.5305639075 75 - 2.1/2” 72 5.3405639090 90 - 3” 91 5.3405639110 110 - 4” 100 5.34
* O-Ring for Unions: 5083, 5084
PVC FITTINGS ACCESSORIES
-
37
VALVESNormal Support
111500Two Nut ValveCemented
Cod d l Z H F J K DN Weight PN Pack
11150016 16 14 43 71 45 65 45 10 93 16 16011150020 20 16 43 75 45 65 45 15 103 16 16011150025 25 19 51 89 54 73 55 20 201 16 9011150032 32 22 58 102 66 78 66 25 281 16 5011150040 40 26 68 120 74 96 80 32 475 16 4011150050 50 31 80 142 86 110 96 40 672 16 2811150063 63 38 93 169 106 129 118 50 1434 16 13
111510Two Nut ValveThreaded
Cod G Lt Z H F J K DN Weight PN Pack
11151003 3/8” 12 47 71 45 65 45 10 95 16 16011151005 1/2” 15 45 75 45 65 45 15 105 16 16011151007 3/4” 16 57 89 54 73 55 20 204 16 9011151010 1” 19 64 102 66 78 66 25 284 16 5011151013 1.1/4” 22 76 120 74 96 80 32 479 16 4011151015 1.1/2” 22 98 142 86 110 96 40 681 16 2811151020 2” 26 117 169 106 129 118 50 1439 16 13
-
113500One Nut ValveCemented
Cod d DN l Z J H F K Weight PN Pack
11350016 16 10 14 41 69 45 65 45 85 16 20011350020 20 15 16 41 73 45 65 45 90 16 20011350025 25 20 19 49 87 54 73 55 159 16 11011350032 32 25 22 55 99 66 78 66 222 16 6011350040 40 32 26 64 116 74 96 80 376 16 4511350050 50 40 31 76 138 86 110 96 536 16 2511350063 63 50 38 90 166 106 129 118 1109 16 15
38
113510One Nut ValveThreaded
Cod G DN l Z J H F K Weight PN Pack
11351003 3/8” 10 14 41 69 45 65 45 85 16 20011351005 1/2” 15 16 41 73 45 65 45 90 16 20011351007 3/4” 20 19 49 87 54 73 55 159 16 11011351010 1” 25 22 55 99 66 78 66 222 16 6011351013 1.1/4” 32 26 64 116 74 96 80 376 16 4511351015 1.1/2” 40 31 76 138 86 110 96 536 16 2511351020 2” 50 38 90 166 106 129 118 1109 16 15
113610One Nut ValveMale-Female-Threaded
Cod RxG Lt Z H F J K DN Weight PN Pack
11361003 3/8” 12 55 67 45 65 45 10 76 16 20011361005 1/2” 15 57 72 45 65 45 15 82 16 20011361007 3/4” 16 68 84 54 73 55 20 150 16 11011361010 1” 19 79 98 66 78 66 25 214 16 6011361013 1.1/4” 22 90 112 74 96 80 32 359 16 4511361015 1.1/2” 22 108 130 86 110 96 40 504 16 2511361020 2” 26 133 159 106 129 118 50 1086 16 15
VALVESNormal Support
-
39
VALVESThreaded Support
Cod d l Z H F J K DN Weight PN Pack
11140016 16 14 43 71 45 65 45 10 93 16 16011140020 20 16 43 75 45 65 45 15 103 16 16011140025 25 19 51 89 54 73 55 20 201 16 9011140032 32 22 58 102 66 78 66 25 281 16 5011140040 40 26 68 120 74 96 80 32 475 16 4011140050 50 31 80 142 86 110 96 40 672 16 2811140063 63 38 93 169 106 129 118 50 1434 16 1311140075 75 44 137 215 128 132 139 65 2000 10 411140090 90 51 148 250 146 153 165 80 3250 10 211140110 110 61 173 295 173 185 207 100 6300 10 2
111400Two Nut ValveCemented
111410Two Nut ValveThreaded
Cod G Lt Z H F J K DN Weight PN Pack
11141003 3/8” 12 47 71 45 65 45 10 95 16 16011141005 1/2” 15 45 75 45 65 45 15 105 16 16011141007 3/4” 16 57 89 54 73 55 20 204 16 9011141010 1” 19 64 102 66 78 66 25 284 16 5011141013 1.1/4” 22 76 120 74 96 80 32 479 16 4011141015 1.1/2” 22 98 142 86 110 96 40 681 16 2811141020 2” 26 117 169 106 129 118 50 1439 16 1311141025 2.1/2” 44 137 215 128 132 139 65 2000 10 411141030 3” 51 148 250 146 153 165 80 3250 10 211141040 4” 61 173 295 173 185 207 100 6300 10 2
-
40
VALVESThreaded Support
112400-112700*Bistop Valve - Cemented
Cod G DN l Z H F J K Weight PN Pack
112X0016 16 10 14 43 71 45 65 45 93 16 80112X0020 20 15 16 43 75 45 65 45 103 16 80112X0025 25 20 19 51 89 54 73 55 201 16 52112X0032 32 25 22 58 102 66 78 66 281 16 30112X0040 40 32 26 68 120 74 96 80 475 16 22112X0050 50 40 31 80 142 86 110 96 672 16 13112X0063 63 50 38 93 169 106 129 118 1434 16 6112X0075 75 65 44 137 215 128 132 139 2000 10 4112X0090 90 80 51 148 250 146 153 165 3250 10 2112X0110 110 100 61 173 295 173 185 207 6300 10 2
112410-112710*Bistop Valve - Threaded
Cod G DN l Z H F J K Weight PN Pack
112X1003 3/8” 10 12 47 71 45 65 45 95 16 80112X1005 1/2” 15 15 45 75 45 65 45 105 16 80112X1007 3/4” 20 16 57 89 54 73 55 204 16 52112X1010 1” 25 19 64 102 66 78 66 284 16 30112X1013 1.1/4” 32 22 76 120 74 96 80 479 16 22112X1015 1.1/2” 40 22 98 142 86 110 96 681 16 13112X1020 2” 50 26 117 169 106 129 118 1439 16 6112X1025 2.1/2” 65 44 137 215 128 132 139 2000 10 4112X1030 3” 80 51 148 250 146 153 165 3250 10 2112X1040 4” 100 61 173 295 173 185 207 6300 10 2
4 7112X00
* with FPM O-Ring INDIVIDUALLY TESTED
INDIVIDUALLY TESTED
4 7112X10
* with FPM O-Ring
-
41
VALVESThreaded Support
113400One Nut ValveCemented
Cod d DN l Z J H F K Weight PN Pack
11340016 16 10 14 41 69 45 65 45 85 16 20011340020 20 15 16 41 73 45 65 45 90 16 20011340025 25 20 19 49 87 54 73 55 159 16 11011340032 32 25 22 55 99 66 78 66 222 16 6011340040 40 32 26 64 116 74 96 80 376 16 4511340050 50 40 31 76 138 86 110 96 536 16 2511340063 63 50 38 90 166 106 129 118 1109 16 1511340075 75 65 44 137 215 128 132 139 1800 10 611340090 90 80 51 148 250 146 153 165 2850 10 411340110 110 100 61 173 295 173 185 207 5300 10 2
113410One Nut ValveThreaded
Cod G DN l Z J H F K Weight PN Pack
11341003 3/8” 10 14 41 69 45 65 45 85 16 20011341005 1/2” 15 16 41 73 45 65 45 90 16 20011341007 3/4” 20 19 49 87 54 73 55 159 16 11011341010 1” 25 22 55 99 66 78 66 222 16 6011341013 1.1/4” 32 26 64 116 74 96 80 376 16 4511341015 1.1/2” 40 31 76 138 86 110 96 536 16 2511341020 2” 50 38 90 166 106 129 118 1109 16 1511341025 2.1/2” 65 44 137 215 128 132 139 1800 10 611341030 3” 80 51 148 250 146 153 165 2850 10 411341040 4” 100 61 173 295 173 185 207 5300 10 2
-
42
VALVESThreaded Support
113710One Nut ValveThreaded
Cod RxG Lt Z H F J K DN Weight PN Pack
11371003 3/8” 12 55 67 45 65 45 10 76 16 20011371005 1/2” 15 57 72 45 65 45 15 82 16 20011371007 3/4” 16 68 84 54 73 55 20 150 16 11011371010 1” 19 79 98 66 78 66 25 214 16 6011371013 1.1/4” 22 90 112 74 96 80 32 359 16 4511371015 1.1/2” 22 108 130 86 110 96 40 504 16 2511371020 2” 26 133 159 106 129 118 50 1086 16 15
113790One Nut ValveFemale-Threaded-Compression
Cod dxG Lt Z Lp H F J K DN Weight PN Pack
113790020 1/2” x 20 15 40 57 112 45 65 45 15 128 16 110113790025 3/4” x 25 16 50 58 124 54 73 55 20 212 16 70113790032 1” x 32 19 53 65 137 66 78 66 25 308 16 40113790040 1.1/4” x 40 22 67 85 174 74 96 80 32 531 16 25113790050 1.1/2” x 50 22 82 90 194 86 110 96 40 753 16 20113790063 2” x 63 26 95 109 230 106 129 118 50 1463 16 10
F
H
Gd K
ZLp Lt
J
-
43
VALVESThreaded Support
111480Two Nut ValvePE End Connector
Cod d DN l Z J H F K Weight PN Pack
111480020 20 15 41 63 65 145 45 45 110 16 80111480025 25 20 50 93 73 193 54 55 205 16 60111480032 32 25 44 102 78 190 66 66 267 16 40111480040 40 32 48 107 96 203 74 80 471 16 30111480050 50 40 54 130 110 238 86 96 686 16 15111480063 63 50 64 142 129 270 106 118 1418 16 10
*111480075 75 65 80 171 132 331 128 139 2000 10 4*111480090 90 80 88 200 153 376 146 165 3250 10 3*111480110 110 100 91 233 185 415 173 207 6300 10 1
113780One Nut ValveCompressorPE End Connector d
F
Lp
H
Z
J
l
K
Cod d DN l Z Lp H F J K Weight PN Pack
11378020 20 15 41 50 57 148 45 65 45 119 16 8011378025 25 20 50 71 58 179 54 73 55 208 16 7011378032 32 25 44 75 65 184 66 78 66 288 16 4011378040 40 32 48 86,5 85 219,5 74 96 80 500 16 3011378050 50 40 54 107 90 251 86 110 96 720 16 1511378063 63 50 64 119,5 109 292,5 106 129 118 1440 16 10
* DELIVERY PROGRAM
-
44
CHECK VALVES
110800-110600110900-110000 Check ValveCemented
Cod d l Z H F K Weight PN Pack
110X0016 16 14 43 71 23 45 90 16 80110X0020 20 16 43 75 23 45 90 16 80110X0025 25 19 51 89 29 55 145 16 52110X0032 32 22 58 102 37 66 245 16 30110X0040 40 26 68 120 44 80 410 16 22110X0050 50 31 80 142 54 96 690 16 13110X0063 63 38 93 169 65 118 1170 16 6110X0075 75 44 137 215 108 139 1810 10 4110X0090 90 51 148 250 125 165 3015 10 3110X0110 110 61 173 295 148 207 5540 10 2
with FPM O-ring 110000with EPDM O-ring 110600 with PTFE coated spring + EPDM O-rings 110800 with PTFE coated spring + FPM O-rings 110900
110810-110610110910-110010Check ValveThreaded
Cod G l Z H F K DN Weight PN Pack
110X1003 3/8” 14 43 71 23 45 10 90 16 80110X1005 1/2” 16 43 75 23 45 15 90 16 80110X1007 3/4” 19 51 89 29 55 20 145 16 52110X1010 1” 22 58 102 37 66 25 245 16 30110X1018 1.1/4” 26 68 120 44 80 32 410 16 22110X1015 1.1/2” 31 80 142 54 96 40 690 16 13110X1020 2” 38 93 169 65 118 50 1170 16 6110X1025 2.1/2” 44 137 215 108 139 65 1810 10 4110X1030 3” 51 148 250 125 165 80 3015 10 3110X1040 4” 61 173 295 148 207 100 5540 10 2
8 6 9 0110X00
with FPM O-ring 110010with EPDM O-ring 110610 with PTFE coated spring + EPDM O-rings 110810 with PTFE coated spring + FPM O-rings 110910
8 6 9 0110X10
-
45
CHECK VALVES
050408Kmocker TeeCemented
Cod d l Z H Weight PN Pack
050408032 32 22 39 86 138 10 80050408040 40 26 47 101 200 10 80050408050 50 31 59 123 292 10 20050408063 63 38 73 150 500 10 20
HZ
d
I I
-
46
FOOT VALVES
116400-116000Foot ValveCemented
Cod d DN l Z H F K Weight PN Pack
116X00016 16 10 14 43 71 23 45 93 16 80116X00020 20 15 16 43 75 23 45 93 16 80116X00025 25 20 19 51 89 29 55 155 16 52116X00032 32 25 22 58 102 37 66 265 16 30116X00040 40 32 26 68 120 44 80 465 16 22116X00050 50 40 31 80 142 54 96 785 16 13116X00063 63 50 38 93 169 65 118 1355 16 6116X00075 75 65 44 137 215 108 139 2100 10 4116X00090 90 80 51 148 250 125 165 3500 10 3116X00110 110 100 61 173 295 148 207 6415 10 2
116410-116010Foot ValveThreaded
Cod G DN Lt Z H F K Weight PN Pack
116X10003 3/8” 10 12 47 71 23 45 95 16 80116X10005 1/2” 15 15 45 75 23 45 105 16 80116X10007 3/4” 20 16 57 89 29 55 204 16 52116X10010 1” 25 19 64 102 37 66 284 16 30116X10013 1.1/4” 32 22 76 120 44 80 479 16 22116X10015 1.1/2” 40 22 98 142 54 96 681 16 13116X10020 2” 50 26 117 169 65 118 1439 16 6116X10025 2.1/2” 65 44 137 215 108 139 2200 10 4116X10030 3” 80 51 148 250 125 165 3600 10 3116X10040 4” 100 61 173 295 148 207 6600 10 2
4 0116X00
with EPDM O-ring 116400with FPM O-ring 116000
4 0116X10
with EPDM O-ring 116410with FPM O-ring 116010
-
47
AIR RELEASE VALVES
116300-116900Air Release ValveCemented
Cod d DN l Z H F K Weight PN Pack
116X00016 16 10 14 43 71 23 45 88 16 80116X00020 20 15 16 43 75 23 45 88 16 80116X00025 25 20 19 51 89 29 55 145 16 52116X00032 32 25 22 58 102 37 66 240 16 30116X00040 40 32 26 68 120 44 80 405 16 22116X00050 50 40 31 80 142 54 96 680 16 13116X00063 63 50 38 93 169 65 118 1145 16 6116X00075 75 65 44 137 215 108 139 2100 10 4116X00090 90 80 51 148 250 125 165 3500 10 3116X00110 110 100 61 173 295 148 207 6415 10 2
116310-116910Air Release ValveThreaded
Cod G DN Lt Z H F K Weight PN Pack
116X10003 3/8” 10 12 47 71 23 45 88 16 80116X10005 1/2” 15 15 45 75 23 45 88 16 80116X10007 3/4” 20 16 57 89 29 55 145 16 52116X10010 1” 25 19 64 102 37 66 240 16 30116X10013 1.1/4” 32 22 76 120 44 80 405 16 22116X10015 1.1/2” 40 22 98 142 54 96 680 16 13116X10020 2” 50 26 117 169 65 118 1145 16 6116X10025 2.1/2” 65 44 137 215 108 139 2200 10 4116X10030 3” 80 51 148 250 125 165 3600 10 3116X10040 4” 100 61 173 295 148 207 6600 10 2
with EPDM O-ring 116300with FPM O-ring 116900
3 9116X00
3 9116X10
with EPDM O-ring 116310with FPM O-ring 116910
-
48
VALVES ACCESSORIES
111100Valve CollarCemented
111110Valve CollarThreaded
Cod d K H l Weight PN
11110016 16 33 20 14 9 1611110020 20 33 20 16 9 1611110025 25 40 22 19 25 1611110032 32 50 26 22 20 1611110040 40 61 30 26 41 1611110050 50 73 34 31 68 1611110063 63 94 42 38 114 1611110075 75 119 47 44 174 1011110090 90 143 56 51 300 1011110110 110 165 67 61 492 10
Cod G K H Lt Weight PN
11111003 3/8” 33 20 12 9 1611111005 1/2” 33 20 16 9 1611111007 3/4” 40 22 17 25 1611111010 1” 50 26 20 20 1611111018 1.1/4” 61 30 23 41 1611111015 1.1/2” 73 34 23 68 1611111020 2” 94 42 27 114 1611111025 2.1/2” 119 47 32 174 1011111030 3” 143 56 35 300 1011111040 4” 165 67 42 492 10
-
49
VALVES ACCESSORIES
11112Blue Handles
Cod d E H L L1 L2 Weight
11112005 16-3/8” 22 22,15 61,7 24,2 37,5 11,211112005 20-1/2” 22 22,15 61,7 24,2 37,5 11,211112007 25-3/4” 24 25,2 72 29,5 42,5 1611112010 32-1” 26,5 30 77,5 30 47,5 20,211112013 40-1.1/4” 31 32,1 94 37,4 56,6 3011112015 50-1.1/2” 35 34,9 107,8 42 65,8 38,611112020 63-2” 41,5 38 130 52,6 77,3 60,411112025 75-2.1/2” 45,3 38 132,8 54,9 77,9 77,211112030 90-3” 51,2 42,9 152,7 63 89,7 117,811112040 110-4” 56,5 47,3 185,7 75,9 109,1 168,8
11113Red Handles
Cod d E H L L1 L2 Weight
11112005 16-3/8” 22 22,15 61,7 24,2 37,5 11,211112005 20-1/2” 22 22,15 61,7 24,2 37,5 11,211112007 25-3/4” 24 25,2 72 29,5 42,5 1611112010 32-1” 26,5 30 77,5 30 47,5 20,211112013 40-1.1/4” 31 32,1 94 37,4 56,6 3011112015 50-1.1/2” 35 34,9 107,8 42 65,8 38,611112020 63-2” 41,5 38 130 52,6 77,3 60,411112025 75-2.1/2” 45,3 38 132,8 54,9 77,9 77,211112030 90-3” 51,2 42,9 152,7 63 89,7 117,811112040 110-4” 56,5 47,3 185,7 75,9 109,1 168,8
-
50
VALVES ACCESSORIES
111140Valve Nut
Cod G E E1 H Weight PN
11114016 16-3/8” 29 45 18 16 1611114020 20-1/2” 29 45 18 16 1611114025 25-3/4” 34 55 21 27 1611114032 32-1” 41 66 26 46 1611114040 40-1.1/4” 52 80 29 75 1611114050 50-1.1/2” 65 96 36 133 1611114063 63-2” 79 118 40 198 1611114075 75-2.1/2” 96 139 52 282 1011114090 90-3” 117 165 59 436 1011114110 110-4” 142 207 68 830 10
1115.207PE End Connector
H
dK
l
h
Cod d K h H I W Weight
1115.207.020 20 33 5 53 41 11 111115.207.025 25 40 6 77 50 24 241115.207.032 32 49 6 68 44 33 331115.207.040 40 60 7 71 48 48 481115.207.050 50 73 9 82 54 85 851115.207.063 63 91 10 90 64 130 130*1115.207.075 75 110 7 105 80 222 222*1115.207.090 90 134 8 119 88 348 348*1115.207.110 110 163 10 127 91 590 590
* DELIVERY PROGRAM
-
51
VALVES ACCESSORIES
valve code 111400/1 Ø 16-110valve code 112700/1 Ø 16-110* valve code 113400/1 Ø 16-110valve code 113710 Ø 16 -63valve code 113780 Ø 16 -63valve code 111480 Ø 20 -63
16-3/8" 20-1/2" 25-3/4" 32-1" 40-11/4" 50-11/2" 63-2" 75-21/2" 90-3" 110-4"
Type 17219
7,2x1,97219
7,2x1,9952
9,5x2114
11,11x1,783043
10,78x2,72356
13,95x2,62467
17,04x3,53475
18,64x3,53487
21,82x3,53134
25,8x3,53
O-Ring For Stem
valve code 111500/1 Ø 16 -63valve code 112400/1 Ø 16 - 110valve code 113500/1 Ø 16 -63valve code 113610 Ø 16 -63valve code 113790 Ø 20 -63valve code 111480 Ø 20 -63
Normal Support Valve code 111500/1Valve code 113500/1Valve code 113610
Threaded SupportValve code 111400/1Valve code 112400/1Valve code *112700/1Valve code 113710Valve code 113790Valve code 113780Valve code 111480
O-Ring For Spacing
16-3/8" 20-1/2" 25-3/4" 32-1" 40-11/4" 50-11/2" 63-2" 75-21/2" 90-3" 110-4"
Type 13075
18,72x2,623075
18,72x2,623100
25,07x2,624118
29,75x3,534150
37,7x3,536187
47x5,436237
59,7x5,346325
84,92x5,346387
97,79x5,34119
117,48x5,34
Type 29999
17,5x1,59999
17,5x1,52093
23,52x1,782118
29,87x1,783143
36,17x2,623181
45,7,2,623231
58,42x2,624287
72,62x3,534350
88,5x3,534425
107,5x3,53
Type 3130
22,23x2,62130
22,23x2,623118
29,83x2,624150
37,7x3,53152
47,62x3,53161
57,15x3,53174
71,63x3,53
Type 4130
22,23x2,62130
22,23x2,623118
29,83x2,623143
36,17x2,623181
45,7x2,623231
58,42x2,62174
71,63x3,534362
91,67x3,536450
113,7x5,34217
142,9x5,34
Type 5PTFE02015x21x3
PTFE02015x21x3
PTFE02520x27x3,5
PTFE03225x33x4
PTFE04032x42x5
PTFE05040x51x5,5
PTFE06350x63x6,5
PTFE07565x82x6
PTFE09080,5x95,6x7,5
PTFE110100,5x116x9
16-3/8" 20-1/2" 25-3/4" 32-1" 40-11/4" 50-11/2" 63-2" 75-21/2" 90-3" 110-4"
Type 13075
18,72x2,623075
18,72x2,623100
25,07x2,624118
29,75x3,534150
37,7x3,536187
47x5,436237
59,7x5,346325
84,92x5,346387
97,79x5,34119
117,48x5,34
Type 29999
17,5x1,59999
17,5x1,52093
23,52x1,782118
29,87x1,783143
36,17x2,623181
45,7,2,623231
58,42x2,624287
72,62x3,534350
88,5x3,534425
107,5x3,53
Type 3 070020020 070020025 070020032 070020040 070020050 070020063
Type 5PTFE02015x21x3
PTFE02015x21x3
PTFE02520x27x3,5
PTFE03225x33x4
PTFE04032x42x5
PTFE05040x51x5,5
PTFE06350x63x6,5
PTFE07565x82x6
PTFE09080,5x95,6x7,5
PTFE110100,5x116x9
Only for compression side valves
* Set of FPM O-Rings
Set of 0-Rings115 / 125 / 128 / 135 / 134
O-Ring For Body
set 115set 125set 135set 135set 134set 125
set 125set 128set 134set 134set 134set 125
set 115set 135set 135
set 125set 125set 128set 134set 134set 134set 125
-
52
VALVES ACCESSORIESCHECK - FOOT - AIR - RELEASE VALVES
valve code 116300/1 Ø 16-110valve code 116900/1 Ø 16-110*
16-3/8" 20-1/2" 25-3/4" 32-1" 40-11/4" 50-11/2" 63-2" 75-21/2" 90-3" 110-4"
Type 1*GP020V12,5x20x2
*GP020V12,5x20x2
*GP025V17x24x2
*GP032V22x32x2
*GP040V38x28x3
*GP050V51x35x4
*GP063V58x42x4
*GP075V57x77x4
*GP090V72x93x4
*GP090V110x90x4
Gasket For Piston
valve code 110800/1 Ø 16 -110 valve code 110600/1 Ø 16 -110 valve code 110900/1 Ø 16 -110*valve code 110000/1 Ø 16 -110*
valve code 116400/1 Ø 16 -110 valve code 116000/1 Ø 16 -110*
Normal Support
O-Ring For Spacing
16-3/8" 20-1/2" 25-3/4" 32-1" 40-11/4" 50-11/2" 63-2" 75-21/2" 90-3" 110-4"
Type 2130
22,23x2,62130
22,23x2,623118
29,83x2,623143
36,17x2,623181
45,7x2,623231
58,42x2,62174
71,63x3,534362
91,67x3,536450
113,7x5,344562
142,47x3,53
Type 33075
18,72x2,623075
18,72x2,623100
25,07x2,624118
29,75x3,534150
37,7x3,536187
47x5,436237
59,7x5,346325
84,92x5,346387
97,79x5,34119
117,48x5,34
Set of 0-Rings*100 / 106
O-Ring For Body
16-3/8" 20-1/2" 25-3/4" 32-1" 40-11/4" 50-11/2" 63-2" 75-21/2" 90-3" 110-4"
Type 33075
18,72x2,623075
18,72x2,623100
25,07x2,624118
29,75x3,534150
37,7x3,536187
47x5,436237
59,7x5,346325
84,92x5,346387
97,79x5,34119
117,48x5,34
Stainiess steel 316 core Spring Teflon coated onstanless steel 316core Spring
16-3/8" 20-1/2" 25-3/4" 32-1" 40-11/4" 50-11/2" 63-2" 75-21/2" 90-3" 110-4"
Type 4 ML020 ML020 ML025 ML032 ML040 ML050 ML063 ML075 ML090 ML110
* Set of FPM O-Rings
Spring
-
53
DESCRIPTION -Precision moulded pressure pipe fittings and flanges made from PVC-U250 suitable for PVC pipe systems up to 16 bar. Our comprehensive range of items and sizes can be joined either by cold solvent cementing or through threading.Sizes and dimensions conform to international standard.All fittings are suitable for potable water, beverges, and foodcontact, as well as corrosive* fluid transports.* For specific chemicals, please consult your sales rep.
STANDARDS -Products conform to the requirments of ISO 264, 727, 2536,3460, KIWA Criteria Std. Nr. 54 and DIN 8063, 19532, UNI EN 1452-3, AFNOR 54-029 and 54-028.
MATERIALS -PVC-U250 unplasticized poly (vinyl chloride) meeting the above mentioned Standards.Injection-moulded components: PVC-U250.Metal reinforced rings: on the female threads INOX AISI 430.Gaskets and O-Rings: EPDM.
MARKINGS -The fittings and valves incorporate the following informationmoulded in relief:
- PLASSON Trade Mark (registered in most countries)
- Diameter of connection
- Nominal pressure
- Type of Material
COLOUR -All fittings and valves are grey, in accordance with PVC-Upressure pipeline standards.
ITEMS -Sockets, 45o and 90o Elbows, 90o Tees, Bushes, Unions,Reducers, Adaptors, Hose Nozzles, Caps, Plugs, Nipples,Flanges, Flange Adaptors, Ball Valves, Foot Valves, CheckValves, and Air Release Valves.
SANITARY LAWS -The PLASSON fittings and valves conform to the sanitary lawsand regulations in force in the various European Countries and in the U.S. relating to transportation of potable water, wine, beverages and food.
APPLICATION FIELDS -Potable water systems, irrigation systems (including fertilization), installation for wine, beer, beverages and other fluids, industrial plants, conveyence of acids, bases, salts, fresh or swimming water, ship installlations. (for special installations, please contact your Plasson supplier).
JOINTING TYPES -The fittings and the valves are available with three types ofconnections:Plain ends for solvent cement jointing to pressure pipes of metric dimensions.Fourth digit in the catalogue no. is “O” (XXXO).Threaded ends to be screwed onto BSP threaded pipes/fittings.Fourth digit in the catalogue no. is “1” (XXX1).A combination of ends (”adaptor fittings”) suitable for joining a PVC pipeline of the metric dimensions to a BSP threaded pipe, fitting, valve or accessory (PVC or other materials).Fourth digit in the catalogue no. is “2” (XXX2).
SIZES -For standard pipes of the ISO metrical range: 12, 16, 20, 25,32, 40, 50, 63, 75, 90, 110, 125, 140, 160, 200, 225mm.And for pipes of the BSP threaded range: 1/4”, 3/8”, 1/2”, 3/4”, 1”, 11/4”, 11/2”, 2”, 21/4”, 3”, 4” ,5”.
THREADS -PLASSON fittings are female threaded (cylindrical) and malethreaded (conical) in accordance with ISO, BS 21, and UNI 339 standards.
FLANGES -PLASSON backing flanges are to be used in connection withthe flange adaptors (catalogue no. 5500, 5510, and 5520). The number, sizes and distance between the centre of the holes conform to UNI 2223, EN 1452-3, ISO 2536 and DIN 8063 for pressure classes of 10-16 Bar.
ACCESSORIES -The fitting range is completed by some accessories such assolvent cement, primer, PTFE tape, etc.
WORKING TEMPERATURES -
* in accordance with EN 805
PRESSURES -The fittings and valves, in accordance with EN 805 standard,have three working pressures: PTA (PA), PMA and PEA.To every PFA values are connected the following PMA and PEA:
CELSIUS 0°-25° 25°-30° 30°-35° 35°-40° 40°-45°
PFA* (PN) Bar 16 14,4 12,8 11,2 10PFA* (PN) Bar 10 9 8 7 6,25
PFA -PA PMA PEA
PRESSURESIN BAR
16 20 2410 12,5 156 7,5 9
TECHNICAL SPECIFICATIONS - FITTINGSProduct Description
-
54
TECHNICAL SPECIFICATIONS - FITTINGSProduct Description
PVC PROPERTIES -The following are the required properties for injection mouldedPVC-U250 fittings and valves in accordance with ISO-EN-UNIStandards:
Permissable working pressures in accordance with DIN8062
ABBREVIATIONS USED IN THIS CATALOGUE -
CHARACTERISTICS UNITS VALUES STANDARDS
Density at 23°C Kg/dm3 1.39 ISO 1183Vicat 5 Kg. oC 77 ISO 306
Tensile impact strength KJ/m2 ≤513 ISO 527Tensile strength at break MPa ≤49 ISO 527
Elongation at break % ≤120 ISO 527Yield stress MPa 46 ISO 527
Flexural modulus MPa ≤3000 ISO 527Heat conductivity at 23 oC W/mK 0,13-0,19 ASTM C 177
Specific heat at 23 oC J/Kg K 900-1000 -Fire resistance (0,85 mm.) V 0 UL 94
SYMBOLS & DEFINITIONS FITTINGS -
PN - Nominal Pressure in Bar - Allowable operating pressure conveying water at 20OC during 50 years.
PFA - Allowable Operating Pressure - Maximum hydrostatic pressure that a component is capable of withstanding continuously in service (EN 805:1999); for water at temperatures up to 25OC: PFA=PN.
PMA - Allowable Maximum Operating Pressure - Maximum pressure occurring from time to time, including surge, that a component is capable of withstanding in service (EN 805:1999).
PEA - Allowable Site Test Pressure - Maximum hydrostatic pressure that a newly installed component is capable of withstanding for a relatively short duration, in order to ensure the integrity and tightness of the pipeline (EN 805:1999).
MRS: Minimum Required Strength
PVC-U: Unplasticized Poly (vinyl chloride)
PVC-U250: Unplasticized Poly (vinyl chloride) material for injectionmoulded components, such as PLASSON fittings and valves, with a proved MRS-value of at least 25Mpa.
EPDM: Ethylene Propylene Rubber
FPM: Fluoride Rubber (VITON)
PTFE: Polytetrafluoroethylene
1 5 10 25 500
5
10
15
20
25
Pres
sure
in b
ars
Time in years
10°C20°C
30°C40°C
50°C
60°C
d, d1 Nominal inside diameterG, G1 Nominal size of thread in inches
DN Nominal boreD, D1 Outside diameterE, E1 Maximum overall external diameter1, 11 Internal length of cementing
L, L1, L2 External length for cementingLt, Lt1 Length of thread
Z Length from pipe stop to centre/other pipe stopC External size of octagon B Length of rim
Dp Pitch circle diameter of bolt holes in flangesS Diameter of bolt holes in flangesN Number of bolt holes in flangee Cross section diameter of O-RingH Total lengthW Weight in grams
-
55
TECHNICAL SPECIFICATIONS - VALVESProduct Description
DESCRIPTION -Precision moulded valves made from uPVC suitable for line pipe systems up to 16 bar. Our comprehensive range of itemsand sizes can be connected either by cold solvent cementingor through threading. Sizes and dimensions conform to international standards. All valves are suitable for potable water, beverages, food as well as corrosive fluid transport.
MATERIALS -PVC-U250 (unplasticized polyvinyl chloride) meeting the standards of DIN-BS-UNI-AFNOR, KIWA, etc
O-Rings -1) EPDM (ethylene-propylene copolymer). Hardness: 70 shore, unless otherwise specified2) FPM (Fluorised-Rubber) Hardness: 70 shore, unless otherwise specified
Springs -1) PTFE coated stainless steel 316 core2) Coated Springs: Teflon coated on stainless steel 316 core
Gaskets (on ball) -1) PTFE (Polytetra Fluorised-Ethylene)2) PE
MARKINGS -The valves incorporate the following information moulded inrelief:Plasson Trade Mark (registered in most countries)Diameter of connectionNominal pressureType of Material
COLOUR -All valves are grey, in accordance with PVC-U pressure pipeline standards.Handles are blue or red.
ITEMS -Ball Valves, Check Valves, Foot Valves, Air Release Valves
SANITARY LAWS -The PLASSON valves conform to the sanitary laws and regulations in force in the various European Countries and inthe U.S. relating to transportation of potable water, wine, beverages and food.
APPLICATION FIELDS -Potable water systems, irrigation systems (including fertilization), installation for wine, beer, beverages and other fluids, industrial plants, conveyence of acids, bases, salts, fresh or swimming water pool, ship installlations. (for special installations, please contact your Plasson supplier).
JOINTING TYPES -The valves are available with three types of connections: Plain ends for solvent cement jointing to pressure pipes of metric dimensions. Fourth digit in the catalogue no. is “O” (XXXO).Threaded ends to be screwed onto BSP threaded pipes/fittings. Fourth digit in the catalogue no. is “1” (XXX1).
SIZES -For standard pipes of the ISO metrical range of mm: 16, 20, 25, 32, 40, 50, 63, 75, 90, 110And for pipes of the BSP threaded range: 3/8”, 1/2”, 3/4”, 1”, 11/4”, 11/2”, 2”, 21/2”, 3”
THREADS -PLASSON valves are female threaded (cylindrical) and male threaded (conical) according with ISO 7, UNI 339, DIN 2999 and BS 21 standards.
MECHANICAL PROPERTIES -Maximum working pressure in bars:Δ16-63: PN16Δ75-110: PN10Minumun pressure TEE Clapet: 0,2barMinumun opening pressure Check Valves: 0,5bar
PVC PROPERTIES -The following are the required properties for an injection moulded PVC fittings withstanding pressures PN16 in accordance with UNI standards:
Permissable working pressures in accordance with DIN8062
CHARACTERISTICS UNITS VALUES STANDARDS
Density Kg/m3 1.4 ISO 1183Vicat (50N) oC 76 ISO 306-BYield stress MPa 45 ISO 527
Tensile Strength at break (230) MPa 40 ISO 527Elongation at break % 120 ISO 527
Tensile Modulus MPa 3000 ISO 527
Unnotched j/m Notched j/m
IZOD Impact ASTM 23oC NB 270Strength D256 0oC NB 150
ISO180 0oC
-
ABBREVIATIONS USED IN THIS CATALOGUE -
56
TECHNICAL SPECIFICATIONS - VALVESProduct Description
d Nominal inside diameterF Distance from centre of valve to top of handle or valveG Nominal size of thread in inchesJ Length of handleK Outside diameter or nut
DN Nominal bore corresponding approx to the inside diameter of the pipeD Outside diameterI Internal length for cementingL External length for cementingLp Internal length to PE pipeLt Length of threadZ Length from pipe stop to centre/other pipe stopH Total lengthW Weight in grams
SYMBOLS & DEFINITIONS FITTINGS -
PN - Nominal Pressure in Bar - Allowable operating pressure conveying water at 20OC during 50 years.
PFA - Allowable Operating Pressure - Maximum hydrostatic pressure that a component is capable of withstanding continuously in service (EN 805:1999); for water at temperatures up to 25OC: PFA=PN.
PMA - Allowable Maximum Operating Pressure - Maximum pressure occurring from time to time, including surge, that a component is capable of withstanding in service (EN 805:1999).
PEA - Allowable Site Test Pressure - Maximum hydrostatic pressure that a newly installed component is capable of withstanding for a relatively short duration, in order to ensure the integrity and tightness of the pipeline (EN 805:1999).
MRS: Minimum Required Strength
PVC-U: Unplasticized Poly (vinyl chloride)
PVC-U250: Unplasticized Poly (vinyl chloride) material for injectionmoulded components, such as PLASSON fittings and valves, with a proved MRS-value of at least 25Mpa.
EPDM: Ethylene Propylene Rubber
FPM: Fluoride Rubber (VITON)
PTFE: Polytetrafluoroethylene
1
22
3
599
4
77
6
8
11
10
12
-
57
ASSEMBLY INSTRUCTIONS
1
22
5
3
9
77
96
8
11
10
12
4
11
10
12
Instructions for connection to the system -A) Completely unscrew the ring nuts (12) and fit them to the pipe that the valve is to be connected to.B) Either glue or screw couplings (10) at the pipe ends.C) Position the valve body (5) between the two couplings.D) Lock the ring nuts for both sides.
Instructions for disassembling and reassemble -Completely unscrew the ring nuts (12).Remove the valve body (5) radially.Remove the handle (1) by pulling upwards.Release the gasket support (8) by pushing the ball (4) through the valve while the valve is closed.Remove O-Rings (6*, 9*, 11*) from gasket
support (8) and PTFE gasket (7*) using a suitable tool in order to prevent damage.Remove the ball (4) which was previously positioned during the closing phase.Remove the stem (3) by pushing downwards and extracting it from inside the valve body.Remove the O-Ring (2*) from the stem (3) using a suitable tool.Remove the O-Ring (9*) and the PTFE gasket (7*) using a suitable tool.To assemble the valve, follow the same procedure in the opposite sequence.
Notes: The valve shall be supplied with a pre-set radial seal, applicable to average operating conditions; due to particular operating conditions, it might be necessary to turn clockwise or anticlockwise the ring nuts (12) from the side of the gasket support (8).
1
22
3
599
4
77
6
8
11
10
12
Instructions for connection to the system -A) Completely unscrew the ring nut (12) and fit it to the pipe that the valve is to be connected to.B) Either glue or screw fixed side (5) to the pipe end.C) Either glue or screw coupling (10) to the pipe end.D) Lock the ring nut.
Instructions for disassembling and reassemble -Completely unscrew the ring nut (12).Remove the valve body (5) radially.Remove the handle (1) by pulling upwards.Release the gasket support (8) by pushing the ball (4) through the valve while the valve is closed.Remove O-Rings (6*, 9*, 11*) from gasket
support (8) and PTFE gasket (7*) using a suitable tool in order to prevent damage.Remove the ball (4) which was previously positioned during the closing phase.Remove the stem (3) by pushing downwards and extracting it from inside the valve body.Remove the O-Ring (2*) from the stem (3) using a suitable tool.Remove the O-Ring (9*) and the PTFE gasket (7*) using a suitable tool.To assemble the valve, follow the same procedure in the opposite sequence.
Notes: The valve shall be supplied with a pre-set radial seal, applicable to average operating conditions; due to particular operating conditions, it might be necessary to turn clockwise or anticlockwise the ring nut (12).
111500111510
113500113510
Normal Support
Instructions for connection to the system -A) Completely unscrew the ring nut (12) and fit it to the pipe that the valve is to be connected to.B) Screw fixed side (5) to the pipe end.C) Screw coupling (10) to the pipe end.D) Lock the ring nut.
Instructions for disassembling and reassemble -Completely unscrew the ring nut (12).Remove the valve body (5) radially.Remove the handle (1) by pulling upwards.Release the gasket support (8) by pushing the ball (4) through the valve while the valve is closed.Remove O-Rings (6*, 9*, 11*) from gasket support (8) and PTFE gasket (7*) using a
suitable tool in order to prevent damage.Remove the ball (4) which was previously positioned during the closing phase.Remove the stem (3) by pushing downwards and extracting it from inside the valve body.Remove the O-Ring (2*) from the stem (3) using a suitable tool.Remove the O-Ring (9*) and the PTFE gasket (7*) using a suitable tool.To assemble the valve, follow the same procedure in the opposite sequence.
Notes: The valve shall be supplied with a pre-set radial seal, applicable to average operating conditions; due to particular operating conditions, it might be necessary to turn clockwise or anticlockwise the ring nut (12).
1
22
3
5
4
77
996
811
10
12
113610
-
58
ASSEMBLY INSTRUCTIONSThreaded Support
1
22
3
599
77
4
68
11
10
12 10
12
11
Instructions for connection to the system -A) Completely unscrew the ring nuts (12) and fit them to the pipe that the valve is to be connected to.B) Either glue or screw couplings (10) at the pipe ends.C) Position the valve body (5) between the two couplings.D) Lock the ring nuts for both sides.
Instructions for disassembling and reassemble -Completely unscrew the ring nuts (12).Remove the valve body (5) radially.Remove the handle (1) by pulling upwards.Insert the key in its seat in the gasket support (8).Completely unscrew the gasket support (8) by rotating the handle anticlockwise.Remove O-Rings (6*, 9*, 11*) from gasket support (8) and PTFE gasket (7*) using a suitable tool in order to prevent damage.
Remove the ball (4) which was previously positioned during the closing phase.Remove the stem (3) by pushing downwards and extracting it from inside the valve body.Remove the O-Ring (2*) from the stem (3) using a suitable tool.Remove the O-Ring (9*) and the PTFE gasket (7*) using a suitable tool.To assemble the valve, follow the same procedure in the opposite sequence.
Notes: The valve shall be supplied with a pre-set radial seal, applicable to average operating conditions; due to particular operating conditions, it might be necessary to follow the instructions below before performing the final step:1. Disconnected the handle (1) by pulling upwards.2. Insert the key in its seat in the gasket support (8).3. Turn clockwise or anticlockwise to adjust as required.
112400-112410112700-112710
1
22
3
59
7
4
7
9
811
1012
11
10
12
6
Instructions for connection to the system -A) Completely unscrew the ring nuts (12) and fit them to the pipe that the valve is to be connected to.B) Either glue or screw couplings (10) at the pipe ends.C) Position the valve body (5) between the two couplings.D) Lock the ring nuts for both sides.
Instructions for disassembling and reassemble -Completely unscrew the ring nuts (12).Completely unscrew the ring nuts (12).Remove the valve body (5) radially.Remove the handle (1) by pulling upwards.Insert the key in its seat in the gasket support (8).Completely unscrew the gasket support (8) by rotating the handle anticlockwise.Remove O-Rings (6*, 9*, 11*) from gasket support (8) and PTFE gasket (7*) using a suitable tool in order to prevent damage.
Remove the ball (4) which was previously positioned during the closing phase.Remove the stem (3) by pushing downwards and extracting it from inside the valve body.Remove the O-Ring (2*) from the stem (3) using a suitable tool.Remove the O-Ring (9*) and the PTFE gasket (7*) using a suitable tool.To assemble the valve, follow the same procedure in the opposite sequence.
Notes: The valve shall be supplied with a pre-set radial seal, applicable to average operating conditions; due to particular operating conditions, it might be necessary to follow the instructions below before performing the final step:1. Disconnected the handle (1) by pulling upwards.2. Insert the key in its seat in the gasket support (8).3. Turn clockwise or anticlockwise to adjust as required.
111400111410
1
22
3
5
77
99
68
1110
12
4
-
59
ASSEMBLY INSTRUCTIONS
1
2
3
77
99
68
1110
12
4
2
5
Instructions for connection to the system -A) Completely unscrew the ring nut (12) and fit it to the pipe that the valve is to be connected to.B) Either glue or screw fixed side (5) to the pipe end.C) Either glue or screw coupling (10) to the pipe end.D) Lock the ring nut.
Instructions for disassembling and reassemble -Completely unscrew the ring nut (12).Remove the valve body (5) radially.Remove the handle (1) by pulling upwards.Insert the key in its seat in the gasket support (8).Completely unscrew the gasket support (8) by rotating the handle anticlockwise.Remove O-Rings (6*, 9*, 11*) from gasket support (8) and PTFE gasket (7*) using a suitable tool in order to prevent damage.
Remove the ball (4) which was previously positioned during the closing phase.Remove the stem (3) by pushing downwards and extracting it from inside the valve body.Remove the O-Ring (2*) from the stem (3) using a suitable tool.Remove the O-Ring (9*) and the PTFE gasket (7*) using a suitable tool.To assemble the valve, follow the same procedure in the opposite sequence.
Notes: The valve shall be supplied with a pre-set radial seal, applicable to average operating conditions; due to particular operating conditions, it might be necessary to follow the instructions below before performing the final step:1. Disconnected the handle (1) by pulling upwards.2. Insert the key in its seat in the gasket support (8).3. Turn clockwise or anticlockwise to adjust as required.
113400113410
Threaded Support
1
22
3
5
77
99
68
1110
12
4
Instructions for connection to the system -A) Completely unscrew the ring nut (12) and fit it to the pipe that the valve is to be connected to.B) Screw fixed side (5) to the pipe end.C) Screw coupling (10) to the pipe end.D) Lock the ring nut.
Instructions for disassembling and reassemble -Completely unscrew the ring nut (12).Remove the valve body (5) radially.Remove the handle (1) by pulling upwards.Insert the key in its seat in the gasket support (8).Completely unscrew the gasket support (8) by rotating the handle anticlockwise.Remove O-Rings (6*, 9*, 11*) from gasket support (8) and PTFE gasket (7*) using a suitable tool in order to prevent damage.Remove the ball (4) which was previously positioned during the closing phase.
Remove the stem (3) by pushing downwards and extracting it from inside the valve body.Remove the O-Ring (2*) from the stem (3) using a suitable