Purchase offer forDepolymerization of Tires and Plastics

Purchase offer forDepolymerization of Tires and Plastics

1. Company

European Engineers have developed a technology for the recycling of tires, plastics and more. The system is completely environmentally friendly and with this latest technology, it does not pollute air soil or water. All values are well below the required directives of the European Union. This means our plant can be installed anywhere without any worries or objections. The by-products are valuable materials, which can easily be sold to recover your initial investment. Our aim is to promote our plant, with this latest technology, in the global market.

Our technology will process all types of rubber waste and take away your problem

in an eco friendly manner 2. Goal

As the scarcity of raw materials in the production of tires and plastics dwindles, it is imperative that discarded tires and plastics be recycled.

Our technology meets the future needs of the world's climate change concerns and the WTO. The company's goal is the establishment of depolymerization plants for recycling of all organic materials, especially rubber products such as tires and plastics. The goal is to become an innovative leader in modern and efficient environmental technologies by effective research and innovation.

Depolymerization of Tires and PlasticsThis system is UNIQUE AND EXCLUSIVE

3. The whole plant before the roof is added

Depolymerization is the decomposition of organic compounds with an oxygen-free (anaerobic) atmosphere. Gas, oil, black carbon and steel are produced out of tires. Gas, oil and carbon are produced out of plastics –with one and the same plant which can be used for plastic AND tires.

4. Main Features of the plant

100% recycling of tires and plastic is achieved No chemicals are used in the process - the process is 100% environmentally friendly.

No pollution during or after the process. All values of pollution to the soil, air or water are well below the required directives of the European Union. The emission is inside the strictly criterion of the European Union.

Each ton of recycled tires binds 10 tons of CO2 and protects the environment from greenhouse gases.

The method is an alternative energy source to oil, Diesel (D2) and gas.

The process can be used for all rubber materials.

5. Process

It is a bus process system with low temperature between 105 and 265° C

Time, the process only takes between 4 and 12 hours - depending on the amount and size of the tires (car, truck, tractor).

Evaporated gases will be condensed in liquids by heat exchanger. The cooling water remains in the process and is recycled.

� The system can run 24 hours a day, 365 days a year.

Your by-products of tire recyclingby products in an ecologically neutral fashion

Oil Steel Carbon Black

Your by-products of tire recycling

CRUDE OIL (45% - 5 0%)

Fuel which can be used for industrial or ship engines. It also can be converted in Diesel (D2) with an extra charged distillation plant.

STEEL WIRE (12 %)

The recovered steel wire in radial tires can be sold to steel manufacturers.

CARBON BLACK (28% - 35%)

Carbon black is required as a raw material which is worldwide needed.

It is artificial RUBBER – natural RUBBER is becoming a rare product.

GAS (8 -10%)

Our Gas we use to run the process

Purchase offer forDepolymerization of Tires and Plastics

Washing and cooling system of the crude oil

6. This concept of the tire recycling is novel and sensational!

Colour and odour removing system:

After distillation to get the fuel oil,it is also better to remove the colour andodour through a third process as shown in the following flow chart:

This concept of the tire recycling is novel and sensational!

Distillation Plant for Diesel if needed

Purchase offer forDepolymerization of Tires and Plastics

7. Purchase Information

· Building size; 450 square meters

· Land Size; 1500 square meters

. Price: 590.000 Euro FOB for the tire or plastic plant 12 tons/day

. Delivery time: 120 days after order and deposit

. Adjustment of the system: 15 - 20 days

. Warranty: 1 Year

TERMS OF PAYMENT: 35% deposit on signing of purchase contract further 30 % at time of shipping, 25 % at the arriving on your harbor 10 % after proof and validity of functioning facility.

The latest Design Version 6.0

Layout of the Plant

Process scheme Version 6.0

Process scheme Version 6.0 (1) Chamber of the Depolymerization max. 360 ° C

(2) Catalytic gas reforming

(3) Oil / water separator

(4) Oil tank with safety tank and oil / water separator

(5) condensation stage 1

(6) condensing stage 2

(7) condensing stage 3

(8) Oil tank with safety tank condensation level 1 to level 3

(9) pressure monitoring unit with non-return valves

(10) safety buffer tank for the process gas for the heating system of the plant

(11) Vacuum unit - System pressure <0.8 bar

(12) Cooling water unit

(13) scrubbers and dust collectors

(14) exhaust fan

(15) Chimney

AMOL Energo Ltd. "The Tracks" Triq P. Brydone,

San Pawl Tat-Targa, Naxxar NXR 2323

Malta

CONTACTS: CEO Miguel Daxner, Alan Wood alansand1@gmail.com

Cell: +43 650 83 220 43

E Mail: noeme@gmx.at

Rickard Balstedt

Cell: +43 6642040770 E Mail: office@goldenfoodbroker.at