PTO Manufacturing Engineering PTS02-083ME, Controls ... Spec... · PTO Manufacturing Engineering...

PTO Manufacturing Engineering

PTS02-083ME, Controls Specification Attachment 3 - Hydraulic Data Form 2631

Revision Date: May 7, 2012

Revision Number: 4.1

Controls Specification

PTO Manufacturing Engineering Administrator: Core Controls (Warren Schwanky) Revision Date: May 7, 2012

Attachment 3 - Hydraulic Data Form 2631

Copyright @ Ford Motor Co. 2012 Revision Number: 4.1 Retention Period: S+1

of 42

Document Number: PTS02-083ME

DO NOT SUBSTITUTE WITHOUT WRITTEN APPROVAL (DEVIATION) FROM FORD CONTROLS ENGINEER, SUPPLIER AND CORE ENGINEERING ADMINISTRATOR. Sources listed in random order.





of 42


1 ACCUMULATOR ................................................................................................................................ 6

1.1 BLADDER TYPE-REQUIRES CONTROLS ENGINEER APPROVAL ........................................ 6 1.2 PISTON TYPE-PREFERRED .................................................................................................... 6 1.3 ACCUMULATOR SAFETY BLOCK ............................................................................................ 6 1.4 FUSE & FUSE ADAPTER .......................................................................................................... 6 1.5 PRESSURE CUT-OFF VALVE, PILOT OPERATED .................................................................. 6

2 CYLINDER ......................................................................................................................................... 7 2.1 CYLINDER ................................................................................................................................. 7 2.2 CYLINDER WITH ROD LOCKING ............................................................................................. 7 2.3 ROTATING TYPE ...................................................................................................................... 7 2.4 GUIDED ..................................................................................................................................... 7

3 DIAGNOSTIC ..................................................................................................................................... 7 3.1 TEST PORT ADAPTER ............................................................................................................. 7 3.2 TEST PORT GAUGE ADAPTER ............................................................................................... 8 3.3 TEST PORT HOSE KIT ............................................................................................................. 8

4 DRIVE COUPLING ............................................................................................................................. 8 4.1 DRIVE COUPLING .................................................................................................................... 8

5 FILTER ............................................................................................................................................... 8 5.1 ELEMENTS – HYDRAULIC ....................................................................................................... 8 5.2 PRESSURE & RETURN LINE FILTER HOUSING – HYDRAULIC ............................................ 8 5.3 OFFLINE OR AUXILIARY FILTRATION .................................................................................... 9

6 FLANGE ............................................................................................................................................. 9 6.1 FLANGE ISO 61/62 TYPE 1 ...................................................................................................... 9

7 FLOW CONTROLS ............................................................................................................................ 9 7.1 INLINE – NON COMPENSATED ............................................................................................... 9 7.2 SANDWICH – NON COMPENSATED ....................................................................................... 9 7.3 SUBPLATE MOUNTED – NON COMPENSATED ..................................................................... 9 7.4 IN-LINE PRESSURE & TEMPERATURE COMPENSATED ...................................................... 9 7.5 SANDWICH – PRESSURE COMPENSATED .......................................................................... 10 7.6 SUBPLATE MOUNTED PRESSURE & TEMPERATURE COMPENSATED ............................ 10

8 FLUID TYPE ..................................................................................................................................... 10 8.1 FLUID TYPE ............................................................................................................................ 10

9 GAUGE ............................................................................................................................................ 10 9.1 GAUGE .................................................................................................................................... 10 9.2 ADAPTORS ............................................................................................................................. 10 9.3 GAUGE ISOLATOR & GAUGE PANEL ................................................................................... 11

10 HEAT EXCHANGER ...................................................................................................................... 11 10.1 AIR/OIL .................................................................................................................................. 11 10.2 SHELL AND TUBE OR PLATE TYPE .................................................................................... 11 10.3 HEATER – IN TANK DESIGN ................................................................................................ 11

11 HOSE ............................................................................................................................................. 11 11.1 HOSE ..................................................................................................................................... 11 11.2 HOSE – THERMOPLASTIC ................................................................................................... 12





of 42


11.3 FITTINGS .............................................................................................................................. 12 11.4 GUARDS AND SLEEVES ...................................................................................................... 12 11.5 CLAMPS ................................................................................................................................ 12 11.6 HOSE WHIP RESTRAINT CABLE ASSEMBLY ..................................................................... 12

12 MANIFOLD – BAR TYPE (207 BAR/3000 PSI) .............................................................................. 13 12.1 MANIFOLD – ALUMINUM OR STEEL ................................................................................... 13

13 MOTOR .......................................................................................................................................... 13 13.1 GEAR ..................................................................................................................................... 13 13.2 GEROTOR ............................................................................................................................. 13 13.3 AXIAL PISTON TYPE ............................................................................................................ 13 13.4 RADIAL PISTON TYPE ......................................................................................................... 13

14 PUMP ............................................................................................................................................. 14 14.1 GEAR – EXTERNAL AND INTERNAL ................................................................................... 14 14.2 PISTON – AXIAL ................................................................................................................... 14 14.3 ROTARY SCREW .................................................................................................................. 14 14.4 VANE TYPE ........................................................................................................................... 14

15 QUICK DISCONNECTS ................................................................................................................. 14 15.1 HYDRAULIC .......................................................................................................................... 14

16 RESERVOIR................................................................................................................................... 14 16.1 BREATHER ........................................................................................................................... 14 16.2 FLUID LEVEL WITH DIAL THERMOMETER ......................................................................... 15

17 ROTARY ACTUATOR .................................................................................................................... 15 17.1 RACK AND PINION TYPE ..................................................................................................... 15 17.2 VANE TYPE ........................................................................................................................... 15

18 SHOCK ABSORBER...................................................................................................................... 15 18.1 SHOCK ABSORBER ............................................................................................................. 15

19 SURGE SUPPRESSOR ................................................................................................................. 16 19.1 SURGE SUPPRESSOR (PULSATION DAMPER) ................................................................. 16

20 SWITCHES ..................................................................................................................................... 16 20.1 LEVEL .................................................................................................................................... 16 20.2 PRESSURE ........................................................................................................................... 16 20.3 TEMPERATURE .................................................................................................................... 16

21 TUBE .............................................................................................................................................. 16 21.1 FITTINGS .............................................................................................................................. 16 21.2 SUPPORTS ........................................................................................................................... 17 21.3 TUBING STEEL ..................................................................................................................... 17 21.4 TUBING SWIVELS – HYDRAULIC INLINE & 90º .................................................................. 17

22 VALVE ............................................................................................................................................ 17 22.1 BALL – HIGH PRESSURE ..................................................................................................... 17 22.2 BALL – LOW PRESSURE, LOCKABLE (30 BAR) ................................................................. 17 22.3 CARTRIDGE – STANDARD CAVITY ..................................................................................... 18 22.4 CARTRIDGE – 2-WAY DIRECTIONAL .................................................................................. 18 22.5 CARTRIDGE – 3-WAY & 4-WAY DIRECTIONAL .................................................................. 18 22.6 DIN CARTRIDGE POPPET (DIN 24342) NG16 & NG25 ....................................................... 18





of 42


22.7 CARTRIDGE – CHECK VALVE ............................................................................................. 18 22.8 CARTRIDGE – FLOW CONTROL ......................................................................................... 18 22.9 CARTRIDGE – NEEDLE VALVE ........................................................................................... 18 22.10 CARTRIDGE – PRESSURE REDUCING VALVE ................................................................ 19 22.11 CARTRIDGE – RELIEF VALVE ........................................................................................... 19 22.12 CARTRIDGE – SEQUENCE VALVE .................................................................................... 19 22.13 CHECK – INLINE ................................................................................................................. 19 22.14 CHECK – SANDWICH (MODULAR) .................................................................................... 19 22.15 CHECK – SUBPLATE MOUNTED ....................................................................................... 19 22.16 DIRECTIONAL VALVE CETOP 3 (DO3) – NG6 .................................................................. 20 22.17 DIRECTIONAL VALVE CETOP 5 (DO5) – NG10 ................................................................ 20 22.18 DIRECTIONAL VALVE CETOP 8 (DO8) – NG22 & NG25 ................................................... 21 22.19 PRESSURE CONTROL IN-LINE MOUNTED ....................................................................... 21 22.20 PRESSURE CONTROL SANDWICH (MODULAR) .............................................................. 21 22.21 PRESSURE CONTROL VALVES (SUBPLATE) .................................................................. 22 22.22 PRESSURE REDUCING SUBPLATE .................................................................................. 22 22.23 PRESSURE REDUCING SANDWICH (MODULAR) ............................................................ 22

23 PROPORTIONAL VALVES ............................................................................................................ 22 23.1 PROPORTIONAL DIRECTIONAL SERVO SOLENOID TYPE: MINIMUM FILTRATION ISO 18/16/13 ......................................................................................................................................... 22 23.2 PROPORTIONAL DIRECTIONAL: MINIMUM FILTRATION ISO 18/16/13 ............................ 23 23.3 PROPORTIONAL PRESSURE CONTROLS: MINIMUM FILTRATION ISO 18/16/13 ............ 23

24 SERVO ........................................................................................................................................... 23 24.1 SERVO .................................................................................................................................. 23

25 DIGITAL CONTROLLERS ............................................................................................................. 23 25.1 CONTROLLER ...................................................................................................................... 23

26 APPENDIX 1- BOSCH-REXROTH POWER UNITS ....................................................................... 24 27 APPENDIX 2- PARKER POWER UNITS ........................................................................................ 33

27.1 PARKER POWER UNITS – LESS THAN 230 L (60 GAL.) .................................................... 33 27.2 PARKER POWER UNITS – GREATER THAN 230 L (60 GAL.) ............................................ 37

28 RECORD OF CHANGES AND AMENDMENTS ............................................................................. 41





of 42


1 Accumulator 1.1 Bladder type-Requires Controls engineer approval Manufacturers Model numbers Parker BA***B3R01-AS1 (S= Specify country(s) for

Certification) 1.2 Piston type-Preferred Manufacturers Model numbers Parker A6E****SL2KRF (S= Specify country(s) for

Certification) 1.3 Accumulator safety block Manufacturers Model numbers Bosch-Rexroth ABZSS***E*** Parker FPS209-1.5 Parker SBAR**M1T1-100AA1 (EU Cert.)

1.4 Fuse & fuse adapter Manufacturers Model numbers Parker 087471**** (fuse, specify disc pressure at 40% over

system pressure) Parker 870760 (fuse adapter with #5 SAE port). These

items are included with ordering code in piston accumulators.

Bosch-Rexroth 1 535 400 170 - Fuse (183-190°C) R978712092 – Adapter with 5000 Psi Gauge

1.5 Pressure cut-off valve, pilot operated Manufacturers Model numbers Bosch-Rexroth ABZSS***E*** Parker SBAR**E1T1-100AA1 (EU Cert.)





of 42


2 Cylinder 2.1 Cylinder Manufacturers Model numbers Parker HMIRS (ISO6020-2) w/ BSPP threaded ports Bosch-Rexroth CDT3..F/CGT3..F1(160 bar) w/ BSPP ports

CDT3..F/CGT3..Z2 (210 bar) w/ BSPP ports 2.2 Cylinder with Rod Locking Manufacturers Model numbers Bosch-Rexroth CDT3..F/CGT3..F1 (160 bar) w/ BSPP ports

CDT3..F/CGT3..Z2 (210 bar) w/ BSPP ports With Sitema rod locking device and G threaded ports. Available on 40 mm through 80 mm bore only. (min release 30-60 bar/435-870 psi depending on bore)

Parker HMI with KFH rod locking device and R threaded ports. Available on 40 mm through 80 mm bore only. (min release 30 to 60 bar depending on bore). ISO60020-2

2.3 Rotating type Manufacturers Model numbers Buck Logansport Model 801 (no internal checks) Buck Logansport Model 802 (with internal checks)

2.4 Guided Manufacturers Model numbers Parker HBN, HBC, HBT, HBR, HBB series (52 bar/750 psi)

BSPP threads 3 Diagnostic 3.1 Test port adapter Manufacturers Model numbers Stauff SMK20 G1/4 VC Parker EMA3/1/4ED BSPP threads





of 42


3.2 Test port gauge adapter Manufacturers Model numbers Parker MAV 1/4NPT-MA3-KM (use with flexible hose kit) Parker MAVMD 1/4NPT-MA3 (gauge direct connect)

3.3 Test port hose kit Manufacturers Model numbers Parker SMA3**** (200 mm, 400 mm, 800 mm, 2000 mm,

4000 mm lengths) 4 Drive coupling 4.1 Drive coupling Manufacturers Model numbers Lovejoy (steel type) KTR (Steel Type)

5 Filter 5.1 Elements – Hydraulic Manufacturers Model numbers Parker PTO-HF series (10 micron)

5.2 Pressure & return line filter housing – Hydraulic Manufacturers Model numbers Parker PTO series HF2, HF3, HF4 (PRESSURE LINE)

(HF2) HF15P*L**E5MD50***19V (2" ELEMENT) (HF3) HF31P3H**E5MD50***11V (3" ELEMENT) (HF4) HF50P4*L**E5MD50***1V (4" ELEMENT) HF2-HF4 include visual and electrical indicators

Parker PTO series HF2, HF3, HF4 (RETURN LINE) (HF2) 15CN*L**E5MD25***19V (2" ELEMENT) (HF3) 40CN2L**E5MD25***19V (3" ELEMENT) (HF4) IL4*L**E5MD25***V (4" ELEMENT) HF2-HF4 include visual and electrical indicators





of 42


5.3 Offline or auxiliary filtration Manufacturers Model numbers Parker PTO series “S”, Model DC3-*ON1*SE5MD*GU

6 Flange 6.1 Flange ISO 61/62 type 1 Manufacturers Model numbers Parker Code 61

5151HK SAE with English bolts M1M1HK ISO, DIN with metric bolts

(preferred) Code 62

HFHFHK SAE with English bolts M2M2HK ISO, DIN with metric bolts

(preferred) 7 Flow controls 7.1 Inline – Non compensated Manufacturers Model numbers Bosch-Rexroth MK*G1X / V MG*G1X / V Parker 9F flow control or 9N & 9MV needle valve.

Colorflow series BSPP ported. 7.2 Sandwich – Non compensated Manufacturers Model numbers Bosch-Rexroth Z2FSK, Z2FS Parker Stack module: ZRD Series

7.3 Subplate mounted – Non compensated Manufacturers Model numbers Bosch-Rexroth F6ZP Parker FS series

7.4 In-Line pressure & temperature compensated Manufacturers Model numbers Parker PCCMS series





of 42


7.5 Sandwich – Pressure compensated Manufacturers Model numbers Bosch-Rexroth Z2FRM (pressure and temperature compensated) Parker FA, FC Series w/BD03 Body

7.6 Subplate mounted pressure & temperature compensated Manufacturers Model numbers Bosch-Rexroth 2FRM10 & 16; 2FRM6 Parker FG3PK, 2F1C series

8 Fluid type 8.1 Fluid type Manufacturers Model numbers Mobil For assembly and MQL machines DTE25/ISO 46

(Ford Tox # 016567) Houghton For wet machining with Houghton Vegetable oil

based cutting fluids- Cosmolubric TR 46/ISO 46 (Ford Tox #180695)

BP Castrol For wet machining with BP-Castrol Vegetable oil based cutting fluids-Carelube HES 46/ISO 46 (Ford Tox #178832)

Current transmission Fluid Program dependant Transmission oil 9 Gauge 9.1 Gauge Manufacturers Model numbers Parker PGB series (bottom mount, ISO 228-1 “G” thread) Parker PGC series (center back mount, ISO 228-1 “G”

thread) Wika Type 213.53 Bosch-Rexroth ABZM M363 (See Data Sheet RE50205)

9.2 Adaptors Manufacturers Model numbers Parker MAV, MAVE, F40H, PTR34 Bosch-Rexroth R9011564xx (¼", ½" metric to BSPP)





of 42


9.3 Gauge isolator & gauge panel Manufacturers Model numbers Bosch-Rexroth AF6EA4X/*** Bosch-Rexroth MS2A2X/*** Parker Gauge isolation valve

Single station: 9GT412S series, dual range bar & psi, ISO 1179-1 ports

Parker Panel mounted gauge and selector valve Multiple station: 9MSGI **** series, dual range bar & psi, ISO 1179-1 ports

10 Heat exchanger 10.1 Air/oil Shall be approved by Ford Controls Engineering. Manufacturers Model numbers Young Radiator Thermal Transfer

10.2 Shell and tube or plate type Shall be approved by Ford Controls Engineering. Manufacturers Model numbers Young Radiator Thermal transfer co Funke

10.3 Heater – In tank design Manufacturers Model numbers Cromalox Watlow

11 Hose 11.1 Hose Manufacturers Model numbers Parker 422 global hose: SAE 100R1 type AT, ISO 1436/I Parker 302/301 global hose: SAE 100R2 type AT, ISO

1436/II





of 42


11.2 Hose – Thermoplastic Manufacturers Model numbers Parker 540N (SAE100R7) with 55 series crimp fittings

(hose assemblies shall utilize crimp type fittings to ISO 12151-1)

11.3 Fittings Manufacturers Model numbers Parker 43 series crimp style connections to ISO 12151-1

(E02 Bite type Chrome 6 Free) Parker 48 series crimp style connections to ISO 12151-1

(E02 Bite type Chrome 6 Free) 11.4 Guards and sleeves Manufacturers Model numbers Parker Protection shields: HP, HT and HP-B series Parker Hose guards: PolyGuard, ParKoil, and Partek nylon

sleeve 11.5 Clamps Manufacturers Model numbers Parker “CL” hose clamps or ParKlamp/ParKlamp kits for

hose 11.6 Hose whip restraint cable assembly Manufacturers Model numbers Parker WRA*** (for hose fittings or adapters) Parker WRF*** (for code 61 and 62 flanges) Bosch-Rexroth ABZH Series





of 42


12 Manifold – Bar type (207 BAR/3000 PSI) 12.1 Manifold – Aluminum or steel Manufacturers Model numbers Bosch-Rexroth ABM/HSR series BSPP ports (aluminum, 307

bar/3000 psi) Bosch-Rexroth ABM/HSR series BSPP ports (ductile iron, 345

bar/5000 psi) Parker MSP**(NG6, NG10 & NG25) (rear ported, ISO

1179-1, BSPP threaded ports 13 Motor 13.1 Gear Consult Ford Controls Engineering for approval. Manufacturers Model numbers Bosch-Rexroth Series AZM F & AZM N (external) Parker PGM & M2 Series

13.2 Gerotor Consult Ford Controls Engineering for approval. Manufacturers Model numbers Parker TE, TF, TH & 110A series

13.3 Axial Piston type Consult Ford Controls Engineering for approval. Manufacturers Model numbers Bosch-Rexroth A10VFM, A2FM Parker F11, F12 series

13.4 Radial piston type Consult Ford Controls Engineering for approval. Manufacturers Model numbers Bosch-Rexroth MCR 03 05,10,15,20 (radial piston type) Parker MR, MRE series





of 42


14 Pump 14.1 Gear – External and internal Manufacturers Model numbers Bosch-Rexroth AZP F, AZP N,& AZP G (external) Bosch-Rexroth PGF, & PGH (internal) Parker PGG2 (internal) Gerotor Parker PGP (external)

14.2 Piston – Axial Manufacturers Model numbers Bosch-Rexroth A10VSO, A4VS0 Parker ISO PD (up to 140 cc) low noise

ISO PV Plus (up to 270 cc) low noise 14.3 Rotary screw Manufacturers Model numbers I.M.O.

14.4 Vane type Manufacturers Model numbers Bosch-Rexroth PVV, PV7 (fixed and press. Compensated) Parker T6, T67, T7 & PVS series

15 Quick disconnects 15.1 Hydraulic Refer to Ford PTO quick disconnect matrix on program eMIX for proper coupler selection. Manufacturers Model numbers Parker FF and 60 series

16 Reservoir 16.1 Breather Manufacturers Model numbers Parker AB*G1***MI (PTO AB series w/3 micron nominal air

rating element & vacuum indicator)

Bosch-Rexroth BFP7G03** (w/3 micron nominal air rating element & vacuum indicator)





of 42


16.2 Fluid level with dial thermometer Manufacturers Model numbers Lube Devices For visual monitoring only with removable

temperature indicator Bosch-Rexroth AB31-21

17 Rotary actuator 17.1 Rack and pinion type Manufacturers Model numbers Parker LTR and HTR & M series

17.2 Vane type Manufacturers Model numbers Parker HRN series

18 Shock absorber 18.1 Shock absorber Manufacturers Model numbers Parker SC and MC self-compensating metric mounting





of 42


19 Surge suppressor 19.1 Surge suppressor (Pulsation Damper) Shall be approved by Ford Controls Engineering) Manufacturers Model numbers Parker PT series, flange mount Bosch-Rexroth SYPD Series

20 Switches 20.1 Level Manufacturers Model numbers Refer to Electrical Data Form 2630

20.2 Pressure Manufacturers Model numbers Refer to Electrical Data Form 2630

20.3 Temperature Manufacturers Model numbers Refer to Electrical Data Form 2630

21 Tube 21.1 Fittings Shall utilize ISO 1179-1 (ISO 228-1 port threads) male studs and ISO 8434-1 tube

connection. Tube connection shall be pre-set utilizing the Parker Hyferset process. Manufacturers Model numbers Parker E02 metric tube fitting w/ BSPP thread bite type

Chrome 6 Free





of 42


21.2 Supports Manufacturers Model numbers Parker ParKlamp RAP series (metric tube clamps)

21.3 Tubing steel All tubing shall be metric seamless according to ISO 10673 and ISO 3304, Chrome 6 Free.

DO NOT PAINT! See the table below for detail sizes

Tube OD mm Wall Thickness Pressure Rating

(bar) Pressure Rating

(psi)

4 1 502 7279 6 1 374 5423 8 1 289 4191 10 1 249 3611 12 1.5 305 4423 15 1.5 249 3611 18 1.5 210 3045 20 2 249 3611 22 2 228 3306 28 2.5 224 3248

Manufacturers Model Numbers 21.4 Tubing swivels – Hydraulic inline & 90º Manufacturers Model numbers Parker DVGE & DG series

22 Valve 22.1 Ball – High Pressure Manufacturers Model numbers Parker BV3D series & KHDN

22.2 Ball – Low pressure, lockable (30 bar) Manufacturers Model numbers Parker 1/4” – 4” BVAL * SS2N *

Use of model DM10166 limit switch is required on all BV series suction line ball valves.





of 42


22.3 Cartridge – Standard cavity Manufacturers Model numbers Parker Winners Circle Series

22.4 Cartridge – 2-way directional Manufacturers Model numbers Parker DSL10*-** series Bosch-Rexroth LC**WE/WS

LFA**WE/WS 22.5 Cartridge – 3-way & 4-way directional Manufacturers Model numbers Parker DSL10*-** series Bosch-Rexroth DM***, DH***,DSL*** & DSH*** Series

22.6 DIN cartridge poppet (DIN 24342) NG16 & NG25 Manufacturers Model numbers Parker CE****01 to CE****08 series (DIN ISO 7368) Bosch-Rexroth LC*** & LFA*** Series

22.7 Cartridge – Check valve Manufacturers Model numbers Bosch-Rexroth VUCN***, VURN**, VSON**, VUPC** Parker CV***, CVH***, CP***, CPH***, CSP***, CPD***

series 22.8 Cartridge – Flow control Manufacturers Model numbers Bosch-Rexroth VRFA**, VRFB**,VRFC**, VFRD**, VLS**, OM** Parker FA***, FP***, FR***, FV***, FC***, FCR*** series

22.9 Cartridge – Needle valve Manufacturers Model numbers Bosch-Rexroth STRN**, STVU**, OD21** Parker NV***, NVH*** series





of 42


22.10 Cartridge – Pressure reducing valve Manufacturers Model numbers Bosch-Rexroth VRPP**, VRPR**, VRPX**, VRPD** Parker PR***, PRC***, PRH*** series

22.11 Cartridge – Relief valve Manufacturers Model numbers Bosch-Rexroth VSAN**, VSBN**, VSBG**, VSNG**, VSDN**,

VSPN**, VSPC**, VSPY**, VSPX** DBDS series (available with CE rating)

Parker RDF15, RDHF15, RAHF15 series (1500 psi limit) 22.12 Cartridge – Sequence valve Manufacturers Model numbers Bosch-Rexroth VSPY**, VSQY** Parker SVH***, SVCH*** series

22.13 Check – Inline Manufacturers Model numbers Bosch-Rexroth “S**, A** & X**” series Bosch-Rexroth “SF” , “ZSF(W) (pre-fill) Parker 9C***S, 9ICP***S & DT series

22.14 Check – Sandwich (modular) Manufacturers Model numbers Bosch-Rexroth

Bosch-Rexroth Bosch-Rexroth

Z1S6, Z1S10 VU-FF**, VU-MF** ZSF

Parker

DSL101** w/BD03 body (cartridge valve, 24 VDC solenoid & manual pressure release mechanism)

22.15 Check – Subplate Mounted Manufacturers Model numbers Bosch-Rexroth SL,SV,LC & LFA*D Series Parker SVL series





of 42


22.16 Directional valve CETOP 3 (DO3) – NG6 Manufacturers Model numbers Bosch-Rexroth 4WE6*6X*EG24N9K72L

Add suffix S0407 for low watt valve coils (high 30watts valve coils shall be used only for applications where the pressure is above 210 bar/ 3050 psi)

Add suffix =AN for ANSI wiring (yields flow P to A when sol. A is energized. Standard Ford wiring.)

Spool option J, D, D OF, Q, & H only. Soft shift version with =AN is available (with standard coil only)

Bosch-Rexroth Poppet Valve acceptable with deviation request. Parker D1VW0** *NJGLJ37BXB1029 PTO 4-pin,

independent M12 connection on each coil (micro) Spool option #004, #011, & #020 only.

22.17 Directional valve CETOP 5 (DO5) – NG10 Manufacturers Model numbers Bosch-Rexroth 4WE10*4X*EG24N9K72L

Add suffix =AN for ANSI wiring (yields flow P to A when sol. A is energized.

Spool option J, D, D OF, Q, & H only Poppet Valve acceptable with deviation request. Soft shift version with =AN is available (with standard coil only)

Parker D31VW0** *4NJGLJ37BXB1029 PTO 4-pin, independent M12 connection on each coil (micro) Spool option #004, #011, & #020 only.





of 42


22.18 Directional valve CETOP 8 (DO8) – NG22 & NG25 Manufacturers Model numbers Bosch-Rexroth 4WEH22*7X*EG24N9K72L (NG22)


Spool option J, D, D OF, Q, & H only. Bosch-Rexroth 4WEH25*6X*EG24N9K72L (NG25)


Spool option J, D, D OF, Q, & H only. Parker D61VW0** *4NJGLJ37BXB1029 (NG25), PTO 4-

pin, independent M12 connection on each coil (micro) Spool option #004, #011 & #020 only.

Parker D81VW0** *4NJGLJ37BXB1029 (NG25), PTO 4-pin, independent M12 connection on each coil (micro). High flow version Spool option #004, #011 & #020 only.

22.19 Pressure control in-line mounted Manufacturers Model numbers Bosch-Rexroth DR series 4x (reducing) Bosch-Rexroth DR “G" series 5X (reducing) Parker 9RCP, 9RP, R4V-**-5630-A1 (1500 PSI max)

R4V (counterbalance) R5U (unloading) R5S (sequence)

22.20 Pressure control sandwich (modular) Manufacturers Model numbers Bosch-Rexroth ZDBK6, 10, ZDB6,10; Z2DB6, 10 (relief), ZDBT Parker ZDV-P * * - * S * 1 (Single Relief Valve) Parker ZDV-AB * * - * S * 1 (Dual Relief Valve)





of 42


22.21 Pressure control valves (subplate) Manufacturers Model numbers Bosch-Rexroth DBD, series 1x, cartridge (relief)

DB6D (relief), DBT (relief), DB6VPW, DZT (sequence), DB/DBW5X (relief), DB..4X, DR-5X (reducing), DZ6DP.5X, DZ10DP, DZ 10,20,30 (multi-function),

Parker R6V-***-591-30B1 series (pilot operated relief valve)

Parker R6V-***591-30-09-GOQ-B1 (main system solenoid controlled pilot operated relief valve )

22.22 Pressure reducing subplate Manufacturers Model numbers Bosch-Rexroth DR..5X, DR10DP-4X Parker PR, VM

22.23 Pressure reducing sandwich (modular) Manufacturers Model numbers Bosch-Rexroth ZDRK6V, ZDR6D, ZDR10D, ZDRK10V, ZDR10V,

ZDRY10V Parker K2S, PR***, PRM, PRDM, VS, ZDR

23 Proportional valves Associated electronics are assumed to be part of valve package and physically located on valve. All valves to be non-adjustable where available. All set-up procedures and parameters shall be shown on hydraulic schematic. It requires separate dedicated power supply. 23.1 Proportional directional servo solenoid type: Minimum filtration ISO 18/16/13 Bosch-Rexroth proportional valves listed all have the valve electronics on-board (OBE)

Other types are available. Consult Ford and Bosch-Rexroth Manufacturers Model numbers Bosch-Rexroth 4WRPEH6, 4WRPEH10, 4WRREH6, 5WRPE10,,

4WRPE6&10, 4WRLE10..25E/W, 4WRLE10..25V/V1, 4WRVE10..25

Parker D*FPE** Series





of 42


23.2 Proportional directional: Minimum filtration ISO 18/16/13 Bosch-Rexroth proportional valves listed all have the valve electronics on-board (OBE)

Others are available consult Ford and Bosch-Rexroth Manufacturers Model numbers Bosch-Rexroth 4WRPE10, 4WRBAE6&10, 4WRAE6&10

4WRBAE, 4WRAE, 4WREE Parker D*FL, D*FH, D*FX Series

23.3 Proportional pressure controls: Minimum filtration ISO 18/16/13 Bosch-Rexroth proportional valves listed all have the valve electronics on-board (OBE)

Others are available consult Ford and Bosch-Rexroth Manufacturers Model numbers Bosch-Rexroth DBETB, DBEE, DBEBE6 (relief)

3DREPE6, DREBE6, DREE, DREME (reducing) Parker R4V** series

24 Servo 24.1 Servo All valves to be non-adjustable where available. All set-up procedures and parameters shall

be shown on hydraulic schematic. Minimum filtration to ISO 18/16/13 Manufacturers Model numbers Bosch-Rexroth 4WSE2EM6, 10, 16 w/ integrated electronics Parker PH 76 series or BD series

25 Digital Controllers 25.1 Controller Manufacturers Model numbers Bosch-Rexroth HNC100 2x (digital controller w/ NC functionality)

HNC100 3x (digital controller w/ NC functionality) HACD (digital closed-loop controller) MLCH Series

Parker PMC, Compax3





of 42


26 Appendix 1- Bosch-Rexroth Power units

Variable Vane – Pump Motor Group Sizing Requirements

Main Pump Nominal

Q1 @ 1200 RPM

Recirc. Pump Nominal Q2 @

1200 RPM

Power @ 1500 psi (103.5 bar)

Tank Size Liter

(Gallon)

Main Vane Pump

(Variable Volume)

Recirculating Pump GPM LPM GPM LPM HP (KW) @ 60Hz

6 Pole, SF 0 / IEC Frame

40 ( 5.2) PGF* - 2.5 9.4 - - 2 (1.5)/100L

60 (15) PGF* - 4.22 16 - - 3 (2.2) / 112M

100 (30) PV7-1X/16-20 (20cc)

AZPF 1X - 005 (5 cc) GEAR PUMP 6.2 23.5 3.6 13.6 8.85 (6.60) / 132M

230 (60) PV7-1X/25-30 (30cc)

AZPF 1X – 019 (19 cc) GEAR PUMP 9.4 35.6 6.2 23.5 12.1 (9.00) / 160M

230 (60) PV7-1X/40-45 (45cc)

AZPF 1X – 019 (19 cc) GEAR PUMP 14.2 53.7 6.2 23.5 17.7 (13.2) / 160L

400 (100) PV7-1X/63-71 (71cc)

PVV1-1X/027 (27 cc)VANE PUMP 22.5 85.2 8.7 32.9 29.8 (22.2) / 200L

Axial Piston – Pump Motor Group Sizing Requirements

Main Pump Nominal

Q1 @ 1200 RPM

Recirc. Pump Nominal

Q2 @ 1200 RPM

Power @ 1500 psi (103.5 bar)

Tank Size Liter

(Gallon)

Main Piston Pump

(Variable Volume)

Recirculating Pump GPM LPM GPM LPM HP (KW) / NEMA Frame

70 (18.5) A10VSO 10 (10cc) - 2.8 10.6 - - 3.0 (2.2) / 215

100 (30) A10VSO 18 (18cc)

AZPF 1X - 005 (5 cc) GEAR PUMP 5.0 18.8 1.2 4.5 7.5 (5.5) / 256UC

230 (60) A10VSO 28 (28cc)

AZPF 1X – 011 (11 cc) GEAR PUMP 7.7 29.1 2.5 9.5 10 (7.5) / 284UC

230 (60) A10VSO 45 (45cc)

AZPF 1X – 16 (16 cc) GEAR

PUMP 12.4 53.7 3.7 14.0 15 (11) / 324UC





of 42


400 (100) A10VSO 71 (71cc)

PVV1-1X/027 (27 cc) VANE PUMP 19.6 74.2 6.2 32.9 25 (18.5) / 364UC

Bosch-Rexroth 70 Liter Power Unit Arrangement Drawing 43AHAG-14297 – D Basic Dimensions





of 42


Power Unit Bosch-Rexroth CONT’D POWER UNIT ARRANGEMENT DRAWING: 43AHAG-11627-0-D BASIC DIMENSIONS FOR AXIAL PISTON OR VARIABLE VANE PUMPS





of 42


Low Noise Power Unit Type ABFAG-V & H <70 dBA Bosch-Rexroth Low Noise Standard Power Units ABFAG (vertical design) Reservoir 100 to 1000 L RE 51 094





of 42


Bosch-Rexroth Low Noise Standard Power Units ABFAG (vertical design) Reservoir Size: 160 and 250 L





of 42







of 42


27 Appendix 2- Parker Power units 27.1 Parker Power units – Less than 230 L (60 gal.) Shall be designed and built to Parker specifications.

Sound levels shall be 72 dBA or less. Contact Parker Program Manager for details.

Manufacturers Model numbers Parker PTO V-Pak series

40 L (10 gal.), max. 3 HP (shall be approved by Ford Controls Engineering)

75 L (20 gal.), max. 5 HP 150 L (40 gal.), max. 7.5 HP 225 L (60 gal.), max. 10 HP





of 42






of 42


27.2 Parker Power units – Greater than 230 L (60 gal.) Shall be designed and built to Parker specifications.

Sound levels shall be 72 dBA or less. Heat exchangers shall be approved by Ford Controls Engineering. All power units over 230 L (60 gal.) shall have flooded inlet design. All reservoirs shall be pressure filled through the return line filter. All return lines shall have a check valve between the tank and filter. The return line filter shall have check valves to prevent oil spillage when changing the element. Do not use anti-siphon holes on return lines. Power units over 570 L shall use off-line pump/motor for filtering and cooling. Power units from 378-569 L shall have all required mounting provisions for installation of off-line pump/motor for filtering and cooling. Pump case drain lines shall be one size larger than the port size of the pump. Double pump arrangements are allowable. (Triple pump combinations will not be accepted). System pressure must be lowered during time of extended standby to minimize heat.

Manufacturers Model numbers Parker PTO FPS-Pak II series

400-600 L (100-160 gal.), 35-52 HP (26-39.5 kW)*, or 10-25 HP (7.5-18.6 kW) without heat exchanger.

600-1200 L (160-320 gal.), – 52-80 HP (39.5-60 kW)*, or 25-35 HP (18.6-26 kW) without heat exchanger.

1200-1600 L (320-420 gal.), 80-125 HP (60-93 kW)*, or 35-40 HP (26-30 kW) without heat exchanger.

Note *: Will not meet 72 dBA sound level (40 HP, TEFC maximum allowed to meet 72 dBA)





of 42






of 42


28 Record of changes and amendments Revision 0 – 08/14/2008 Initial release.

Revision 1 – 10/06/2008 No changes.

Revision 2 – 12/12/2008 No changes.

Revision 3 – 08/18/2009 22.16 Added new part number. None specified before. 22.17 Added new part number. None specified before. 22.18 Added new part numbers. None specified before.

Revision 4 — 07/15/2011 All Combined Main and Bosch-Rexroth supplement. Parker supplement was deleted.

Revision 4.1— 03/30/2012 Global changes

Added Parker part numbers in addition to Bosch-Rexroth. Moved Bosch-Rexroth Hydraulic power units drawings to appendix 1. Added Parker Hydraulic power units to Appendix 2

1.1 Part number was changed from BR HAB….series to Parker BA***B3R01-AS1 1.2 Part number was changed from A6E****L2KRF to Parker A6E****SL2KRF 1.3 Changed name of position from " Dump valve" to Accumulator safety block. 1.4 Part number was changed from1468970002 to 870760. Added BR Part number 1.5 Added the new section. 4.1 Added KTR coupling. 9.1 Added BR gauges. 10.2 Added Funke Heat exchanger 11.6 Added BR part number 12.1 Added HSR manifolds. 13.3 Updated Piston pumps part numbers 14.2 Updated Piston Axial pumps part numbers 14.4 Updated Vane pumps part numbers 16.1 Added BR breather 16.2 Added BR fluid level. 19.1 Added BR surge suppressors 22.4 Added BR part number 22.5 Added BR part number





of 42


22.6 Added BR part number 22.11 Added DBDS BR series 22.13 Modified part BR part number 22.15 Modified part BR part number A Added 40L HPU A Removed 70L HPU. Added 60L HPU

PTO Manufacturing Engineering PTS02-083ME, Controls ... Spec... · PTO Manufacturing Engineering...

Documents

Transcript of PTO Manufacturing Engineering PTS02-083ME, Controls ... Spec... · PTO Manufacturing Engineering...