PTD F&O_2
-
Upload
archit-papriwal -
Category
Documents
-
view
244 -
download
0
Transcript of PTD F&O_2
-
8/6/2019 PTD F&O_2
1/19
PORTABLE TICKETDECODER
FUNCTIONAL&
OPERATIONALDESCRIPTION
-
8/6/2019 PTD F&O_2
2/19
USE OF PTDPortable ticket decoder
It is a device to check the contact lessmedia compliance to business rulesusedIt is a portable magnetic contact lesscard reader for inspector in order tocheck the validity of CSC/CST
-
8/6/2019 PTD F&O_2
3/19
COMMUNICATION ARCHITURE
-
8/6/2019 PTD F&O_2
4/19
FUNCTION :Docking stationThe docking station
performs the following
functionsPhysical support of PTDBattery recharging
Interface for exchangeof information betweenthe PTD & PC host byUSB link
-
8/6/2019 PTD F&O_2
5/19
FUNCTION:PTDInitializationSecured shift opening: To limit accessFare media control: media valid &validatedInformation: inform passenger about
CSC/CST contentsCommunication: Between PTD & PCMaintenance: To test PTD
-
8/6/2019 PTD F&O_2
6/19
INITILIZATIONWhen PTD is switched On thefollowing operation takes place
Agent actionPush on the switch on key (Menu-Key)PTD action
Test to detect whether it is on thedocking stationSelf test(software,parameters) etc.
-
8/6/2019 PTD F&O_2
7/19
SECURED SHIFT OPENING Agent action Agent card presentation or ID number enter with physical
keyboardPTD actionCheck validity of PIN code and ID card or ID no.3 attempts can be made prior to blocking
(Unblocking of PTD can be achieved by setting PTD on docking station)
R esult Beginning of maintenance shift or control shift.
-
8/6/2019 PTD F&O_2
8/19
CONTROL SESSION: Fare media Agent actionPassenger is presenting his fare media to thePTD
Agent sees the display with all data included inthe media and check and analyze the dataIn case of doubt the agent can explore theinformation which is included into the card bypressing the navigation keys last transactionPTD actionCheck if belongs to black list
Explore the different blocks
-
8/6/2019 PTD F&O_2
9/19
INFORMATION SESSION Agent actionBeginning of control information sessionPassenger is presenting his fare media to the PTD
Agent sees the display with all data included in the mediaand check and analyze the dataIn case of doubt the agent can explore the informationwhich is included into the card by pressing the navigationkeys last transaction
PTD actionCheck if belongs to black listExplore the different blocksR esult D isplays last transaction information
-
8/6/2019 PTD F&O_2
10/19
COMMUNICATION FUNCTION Agent actionInsert PTD in the docking station connected to PChost
PTD actionClose information sessionBeginning of communication session
ResultDownloading of operation filesUploading of software,parameters ,host listDisplay of message when data transfer is complete
-
8/6/2019 PTD F&O_2
11/19
MAINTENANCE FUNCTION Agent actionBeginning of maintenance sessionPTD
actionW aiting for a contact less mediumCount down time when not used beforegoing to stand by mode
R esult Access to maintenance function(hardwaretest,error consultation)Can go to main menu from maintenance
menu
-
8/6/2019 PTD F&O_2
12/19
DISPLAYThe display isdivided into two
parts
Active part: partused by application
System informationpart: dedicated toPTD system
-
8/6/2019 PTD F&O_2
13/19
Main MenuThis main menu isdisplayed when
initialization of PTDis completedThe PTD is readyto be used bymaintenance or inspector agent
-
8/6/2019 PTD F&O_2
14/19
-
8/6/2019 PTD F&O_2
15/19
Maintenance modeThe maintenancemenu gives access
to this screenOnce the agent isidentified he isauthorized to usethe PTD withmaintenance menu
-
8/6/2019 PTD F&O_2
16/19
Inspector ModeW hen inspector menu isselected the first screen
requests the agent cardpresentationIn case defective card theagent has to enter his ID &password manually
-
8/6/2019 PTD F&O_2
17/19
Stand By ModeW hen no action on keyboard occur during oneminute the PTD is set to stand by .This stepcorresponds to switching off for the following
elementsB ack lightLCD LEDCSC/CST reader
Before reaching this state the PTD stores the
configuration in which it was before standbyPressing on OK key it awakens the PTD andit displays the same screen as before standby.
-
8/6/2019 PTD F&O_2
18/19
Automatic Shut down mode Automatic shutdown starts after 15 minutesin stand by .This occurs when the PTD is notused in order to spare the battery and theoperational autonomyW hen PTD goes to shutdown it closes off the application and switches off power To wake up PTD it must be switched on bypressing OK key.Then it starts the process
Authentication of agent must be made againfor security purpose.Then agent came backto inspector or maintenance menu
-
8/6/2019 PTD F&O_2
19/19
Now we KNOW
Equipment purposeCommunication ArchitectureDifferent session of PTDVarious modesVarious parts of display
Main menu